Satellite Receiver - Business Satellite TV

Satellite Receiver - Business Satellite TV
6131_4_Ch2_eng
10/30/08
2
2:54 PM
Page 1
Satellite
Receiver
ABOUT YOUR SATELLITE RECEIVER
This chapter helps you get to know your remote control, which in turn lets you use all of
the functions of your receiver. After you read the information here, be sure to practice
what you learn so that you can quickly understand what’s presented in later chapters.
What you’ll find in this chapter:
• REMOTE CONTROL
• SATELLITE RECEIVER FRONT PANEL
• SATELLITE RECEIVER BACK PANEL
• USING THE MENUS
• USING TEXT FIELDS
Page 2-1
6131_4_Ch2_eng
10/30/08
2:54 PM
Page 2
User Guide
REMOTE CONTROL
The remote control gives you easy access to all the features of your satellite receiver.
You can program the remote to control the satellite receiver and up to three other devices
(see page 9-4). These devices can be a TV, a VCR or DVD player, and a third device.
This section describes how to use the various features of the remote control delivered
with your satellite TV system.
IR signals travel only short distances (40 feet or less), and cannot go through walls or
other solid objects. You must point the remote control directly at the device, with no
objects blocking the line of sight.
The remote control uses IR signals to control both the receiver and other devices that the
remote is programmed to control.
REMOTE CONTROL BATTERIES
The remote control comes with four AAA batteries.
When you replace old batteries, you should replace all of
the batteries. Use batteries of the same kind, for example,
alkaline or carbon zinc. Don’t mix batteries of different
kinds. Alkaline batteries last longer.
1. Press down on the top of the battery cover and slide the
cover off.
2. Take out all of the old batteries.
3. Put four new batteries in. Make sure you match the plus
(“+”) ends with the plus markings on the battery case.
Note: The remote control cannot work with less than
four AAA batteries.
4. Slide the cover back into place.
LOW BATTERY WARNING
When you see a low battery warning message on your screen below the Program Banner,
the batteries in your remote control are weak and need to be replaced.
Here's a helpful hint...Don’t wait until you see
this warning to change the remote control
batteries. If your remote control doesn’t seem
to be working very well
(for example, you have to press POWER more
than once to turn the receiver on or off), it’s a
good indication that the batteries are getting
weak.
Page 2-2
6131_4_Ch2_eng
10/30/08
2:54 PM
Page 3
Satellite Receiver
Remote Control
2
REMOTE CONTROL BUTTONS
To use the features as described in this section, make sure you are in SAT mode by
pressing the SAT Mode button.
Page 2-3
6131_4_Ch2_eng
10/30/08
2:54 PM
Page 4
User Guide
To use the features as described in this section, make sure you are in TV mode by
pressing the TV Mode button.
Note: See page 9-4 for instructions to program the remote to control your TV.
Page 2-4
6131_4_Ch2_eng
10/30/08
2:54 PM
Page 5
Satellite Receiver
Remote Control
2
To use the features as described in this section, make sure you are in VCR mode by
pressing the VCR Mode button. You can use this mode to operate your DVD player
instead of a VCR.
VCR/DVD Power & TV Power
Top button turns the VCR/DVD player
on/off, bottom button turns the TV on/off
TV/Video
Switch VCR between
its TV & VCR mode
Channel Up/Down
Buttons
Channel up/down on a
VCR
Skip Back
Skip back a few
seconds on a DVD
Rewind
Rewind a videotape
or reverse a DVD
Stop
Stop playing or
recording a videotape,
stop playing a DVD
Skip Forward
Skip ahead a few seconds
on a DVD
Pause
Pause play of a
videotape or DVD
Fast Forward
Fast forward through
a videotape or DVD
Play
Begin playback of a
videotape or DVD
Number Buttons
Enter a channel
number on VCR
Record
Record a program onto
a videotape
Note: See page 9-4 for instructions to program the remote to control your TV.
Page 2-5
6131_4_Ch2_eng
10/30/08
2:54 PM
Page 6
User Guide
SATELLITE RECEIVER FRONT PANEL
SATELLITE RECEIVER BACK PANEL
HDMI
Use care when connecting
cable to the HDMI port to avoid damage.
Page 2-6
6131_4_Ch2_eng
10/30/08
2:54 PM
Page 7
Satellite Receiver
Using The Menus
2
USING THE MENUS
The menus make using the receiver and selecting programs quick and easy. Use the
menus to control the receiver and to use its features, such as setting locks, choosing a
program, or creating a favourites list.
OPEN AND CLOSE MENUS
You can open the menus in either of two ways:
• Press MENU to open the Main Menu, then open any of the other menus
from the Main Menu.
• Use the following buttons on the remote control:
– Press GUIDE to open the Program Guide.
– Press THEMES (LEFT ARROW) when watching a program to open
the Themes and Search menu.
– Press BROWSE (RIGHT ARROW) to display the Browse Banner.
To close a menu and return to watching a program, press VIEW LIVE TV.
HIGHLIGHTING MENU OPTIONS
To highlight a menu option, use the remote control ARROWS to move the on-screen
highlight to the menu option. When you do move the on-screen highlight, the option
becomes amber.
SELECTING MENU OPTIONS
When you select a menu option, that option takes effect right away. You can select a
menu option in either of two ways:
• If the option has a number next to it, press the number on
the NUMBER PAD button that matches this number. When
you use the NUMBER PAD, you do not need to highlight
the option first.
• Move the highlight to the menu option using the remote
control ARROWS. Then press SELECT. In the example,
Program Guide is highlighted.
Page 2-7
6131_4_Ch2_eng
10/30/08
2:54 PM
Page 8
User Guide
LIST OF CHOICES IN THE MENUS
When you make a choice in a list, the receiver does not apply the change until you
select Done. If you do not want to save any changes, select Cancel to discard all the
changes made in the menu.
There are two types of lists:
• A single choice list allows you to select only one choice at a
time. If you select another choice, your previous choice is
deselected.
• A multiple choice list allows you to select more than one choice
at one time. If you select another choice, your previous
choice(s) stays selected.
CANCELLING A PROCEDURE
You can cancel a procedure in any of three ways:
• If you want to return to watching a program, press VIEW LIVE TV.
• If you want to return to the previous menu, press CANCEL.
• Wait a few minutes and the menu will close automatically, discarding any
changes you have made.
Page 2-8
6131_4_Ch2_eng
10/30/08
2:54 PM
Page 9
Satellite Receiver
Using Text Fields
2
USING TEXT FIELDS
When you use features on the receiver, you might be required to enter information, such
as the name of a movie when using Search, into areas known as text fields. Your receiver
has two basic ways to enter the information:
• Virtual Keyboard
• Remote Control NUMBER PAD
USING THE VIRTUAL KEYBOARD
Use the virtual keyboard letters to type the
information. Use the LEFT, RIGHT, UP, and DOWN
ARROWS to navigate around the keyboard. Select
the characters you want.
USING THE NUMBER PAD
Use the letters above the NUMBER PAD on the
remote control while the highlight is in the field. For
example, when looking for the channel and times to
watch Rudy Friml Presents, you press 7 three times
for an R, 8 two times for a U, 3 one time for a D, and
9 three times for a Y to spell the word “Rudy.”
WHILE IN THE TEXT FIELD
When the cursor is in the field:
• Press the LEFT ARROW to delete characters.
• Press 0 to enter a blank space, such as between words.
• Press STAR to backspace without deleting characters.
• Use the RIGHT ARROW to forward space without deleting characters.
Page 2-9
6131_4_Ch2_eng
10/30/08
2:54 PM
Page 10
User Guide
TIPS
• If you do not do anything in a menu for several minutes, the menu automatically
closes. This will discard any changes you made, and display the program you were
watching.
• Keep from accidentally changing the channel or input on your TV by programming
the remote in Limited Mode (see page 9-4).
QUESTIONS
• Why doesn’t my remote control work?
• Make sure the remote control is in the right mode (see pages 2-2 and 9-4).
• Make sure the batteries are good (see page 2-2).
• Make sure you are pointing the remote directly at the receiver (TV, VCR, DVD
player, etc.) (page 2-2).
Page 2-10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising