D2™ Bravo
D2™ Bravo
Owner’s Manual
July 2015
Printed in Taiwan
190-01907-00_0B
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the
right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such
changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Garmin , the Garmin logo, Auto Lap , Auto Pause , TracBack , VIRB , and Virtual Partner are trademarks of Garmin Ltd. or its subsidiaries, registered in the
USA and other countries. D2™ Bravo, Connect IQ™, Garmin Connect™, HRM-Run™, tempe™, and Vector™ are trademarks of Garmin Ltd. or its subsidiaries. These
trademarks may not be used without the express permission of Garmin.
®
®
®
®
®
®
Android™ is a trademark of Google Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is
under license. The Cooper Institute , as well as any related trademarks, are the property of The Cooper Institute. Advanced heartbeat analytics by Firstbeat.
iOS is a registered trademark of Cisco Systems, Inc. used under license by Apple Inc. Mac is a trademark of Apple Inc., registered in the U.S. and other
countries. Training Stress Score™ (TSS), Intensity Factor™ (IF), and Normalized Power™ (NP) are trademarks of Peaksware, LLC. Wi‑Fi is a registered mark of
Wi-Fi Alliance Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Other trademarks and trade
names are those of their respective owners.
®
®
®
®
®
®
This product is ANT+ certified. Go to www.thisisant.com/directory for a list of compatible products and apps.
®
Table of Contents
Getting Started............................................................... 1
Charging the Device ................................................................... 1
Keys ............................................................................................ 1
Updating the Aviation Database ................................................. 1
Pairing Your Smartphone with Your Device ............................... 1
Flying............................................................................... 1
Setting the Altitude Alert ............................................................. 1
Setting the Barometric Pressure ................................................. 1
Starting a Flight ........................................................................... 2
Navigating to the Nearest Airport ........................................... 2
Nearest Airport .................................................................. 2
Navigating to an Airport by Its Identifier ................................. 2
Horizontal Situation Indicator ................................................. 2
Stopping Navigation ............................................................... 2
Disabling the Automatic Flight Timer ..................................... 2
Activities......................................................................... 2
Starting an Activity ...................................................................... 2
Stopping an Activity .................................................................... 2
Skiing .......................................................................................... 2
Going Downhill Skiing or Snowboarding ................................ 2
Viewing Your Ski Runs ...................................................... 3
Running ...................................................................................... 3
Going for a Run ...................................................................... 3
Using the Metronome ............................................................. 3
Biking .......................................................................................... 3
Going for a Ride ..................................................................... 3
Swimming ................................................................................... 3
Going for a Pool Swim ........................................................... 3
Swim Terminology ............................................................. 3
Stroke Types ..................................................................... 3
Resting During Pool Swimming ......................................... 4
Training with the Drill Log .................................................. 4
Training........................................................................... 4
Setting Up Your User Profile ....................................................... 4
Fitness Goals ......................................................................... 4
About Heart Rate Zones ........................................................ 4
Setting Your Heart Rate Zones ......................................... 4
Heart Rate Zone Calculations ........................................... 4
About Lifetime Athletes .......................................................... 5
Setting Your Power Zones ..................................................... 5
Activity Tracking .......................................................................... 5
Turning On Activity Tracking .................................................. 5
Using the Move Alert .............................................................. 5
Auto Goal ............................................................................... 5
Sleep Tracking ....................................................................... 5
Using Sleep Mode ............................................................. 5
Workouts ..................................................................................... 5
Following a Workout From the Web ....................................... 5
Starting a Workout ................................................................. 5
About the Training Calendar .................................................. 5
Using Garmin Connect Training Plans .............................. 5
Interval Workouts ........................................................................ 6
Creating an Interval Workout ................................................. 6
Starting an Interval Workout .................................................. 6
Stopping an Interval Workout ................................................. 6
Using Virtual Partner® ................................................................ 6
Setting a Training Target ............................................................ 6
Cancelling a Training Target .................................................. 6
Racing a Previous Activity .......................................................... 6
Personal Records ....................................................................... 6
Viewing Your Personal Records ............................................ 6
Restoring a Personal Record ................................................. 7
Clearing a Personal Record ................................................... 7
Table of Contents
Clearing All Personal Records ............................................... 7
Running Dynamics ...................................................................... 7
Training with Running Dynamics ........................................... 7
Color Gauges and Running Dynamics Data .......................... 7
Tips for Missing Running Dynamics Data .............................. 7
About VO2 Max. Estimates ......................................................... 8
Getting Your VO2 Max. Estimate for Running ....................... 8
Getting Your VO2 Max. Estimate for Cycling ......................... 8
VO2 Max. Standard Ratings .................................................. 8
Viewing Your Predicted Race Times ..................................... 8
Recovery Advisor ........................................................................ 8
Turning On the Recovery Advisor .......................................... 9
Viewing Your Recovery Time ................................................. 9
About Training Effect .................................................................. 9
Viewing Widgets............................................................. 9
Time and Date ............................................................................ 9
Altimeter ...................................................................................... 9
Compass ..................................................................................... 9
Temperature ............................................................................... 9
Music Controls .......................................................................... 10
Weather .................................................................................... 10
Calendar ................................................................................... 10
Notifications .............................................................................. 10
METAR ..................................................................................... 10
Clock.............................................................................. 10
Setting the Alarm ...................................................................... 10
Starting the Countdown Timer .................................................. 10
Using the Stopwatch ................................................................. 10
Setting Sunrise and Sunset Alerts ............................................ 10
Navigation..................................................................... 11
Saving Your Location ............................................................... 11
Navigating to a Destination ....................................................... 11
Navigating with Sight 'N Go ...................................................... 11
Compass ................................................................................... 11
Map ........................................................................................... 11
Panning and Zooming the Map ............................................ 11
Navigating To Your Starting Point ............................................ 11
Altimeter and Barometer ........................................................... 11
History ........................................................................... 11
Using History ............................................................................ 11
Viewing Your Time in Each Heart Rate Zone ...................... 11
Viewing Step Totals .................................................................. 12
Viewing Data Totals .................................................................. 12
Deleting History ........................................................................ 12
Using the Odometer .................................................................. 12
Connect IQ Features.................................................... 12
Downloading Connect IQ Features .......................................... 12
Downloading Connect IQ Features Using Your Computer ....... 12
Widgets ..................................................................................... 12
Viewing Widgets .................................................................. 12
VIRB® Remote .................................................................... 12
Controlling a VIRB Action Camera .................................. 12
Connected Features..................................................... 13
Enabling Bluetooth Notifications ............................................... 13
Viewing Notifications ............................................................ 13
Managing Notifications ......................................................... 13
Turning Off Bluetooth Technology ....................................... 13
Garmin Connect ........................................................................ 13
Using Garmin Connect Mobile ............................................. 13
Manually Uploading Data to Garmin Connect Mobile ..... 13
Using Garmin Connect on Your Computer .......................... 13
Wi‑Fi® Connected Features ..................................................... 13
Setting Up Wi‑Fi Connectivity .............................................. 14
Customizing Your Device............................................ 14
i
Activity Settings ........................................................................ 14
Customizing the Data Screens ............................................ 14
Adding a Map to an Activity ................................................. 14
Alerts .................................................................................... 14
Setting an Alert ................................................................ 15
Auto Lap ............................................................................... 15
Marking Laps by Distance ............................................... 15
Enabling Auto Pause® ......................................................... 15
3D Speed and Distance ....................................................... 15
Using Auto Scroll ................................................................. 15
UltraTrac .............................................................................. 15
Power Save Timeout Settings .............................................. 15
Watch Face Settings ................................................................. 16
Customizing the Watch Face ............................................... 16
Customizing the Widget Loop ................................................... 16
Sensors Settings ....................................................................... 16
Compass Settings ................................................................ 16
Calibrating the Compass ................................................. 16
Setting the North Reference ............................................ 16
Altimeter Settings ................................................................. 16
Calibrating the Barometric Altimeter ............................... 16
Elevation Settings ................................................................ 16
Navigation Settings ................................................................... 16
Customizing Map Features .................................................. 16
System Settings ........................................................................ 16
Changing the Units of Measure ........................................... 17
Time Settings ....................................................................... 17
Backlight Settings ................................................................ 17
ANT+ Sensors............................................................... 17
Pairing ANT+ Sensors .............................................................. 17
Putting On the Heart Rate Monitor ........................................... 17
Tips for Erratic Heart Rate Data ........................................... 18
Using an Optional Bike Cadence Sensor ................................. 18
Foot Pod ................................................................................... 18
Foot Pod Calibration ............................................................ 18
Calibrating Your Foot Pod Manually ............................... 18
tempe ........................................................................................ 18
Device Information....................................................... 18
Contacting Garmin Aviation Product Support ........................... 18
Viewing Device Information ...................................................... 18
Device Care .............................................................................. 18
Cleaning the Device ............................................................. 18
Metal Watch Band Adjustment ................................................. 18
Registering Your Device ........................................................... 18
Caring for the Heart Rate Monitor ............................................. 18
Specifications ............................................................................ 19
Battery Information ............................................................... 19
HRM-Run Specifications ........................................................... 19
User Replaceable Batteries ...................................................... 19
Replacing the Heart Rate Monitor Battery ........................... 19
Data Management .................................................................... 19
Disconnecting the USB Cable .............................................. 19
Deleting Files ....................................................................... 19
Troubleshooting ........................................................................ 19
My daily step count does not appear ................................... 19
The temperature reading is not accurate ............................. 19
Resetting Your Device ......................................................... 19
Restoring All Default Settings .............................................. 20
Maximizing the Battery Life .................................................. 20
Getting More Information ..................................................... 20
Appendix....................................................................... 20
Data Fields ................................................................................ 20
Software License Agreement ................................................... 22
Symbol Definitions .................................................................... 22
Index .............................................................................. 23
ii
Table of Contents
Getting Started
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
À
Á
Charging the Device
NOTICE
To prevent corrosion, thoroughly clean and dry the contacts and
the surrounding area before charging or connecting to a
computer. Refer to the cleaning instructions in the appendix.
The device is powered by a built-in lithium-ion battery that you
can charge using a standard wall outlet or a USB port on your
computer.
1 Plug the USB end of the cable into the AC adapter or a
computer USB port.
2 Plug the AC adapter into a standard wall outlet.
3 Pinch the sides of the charging cradle À to open the arms on
the cradle.
LIGHT
Select to turn the backlight on and off.
Hold to turn the device on and off.
Hold to view the stopwatch.
Hold to view the timer.
Hold to lock or unlock the screen.
START Select to start or stop an activity.
STOP Select to choose an option in a menu.
Hold to navigate to an airport by the airport code.
Â
BACK
Select to return to the previous page.
Select to record a lap or a rest during an activity.
Hold to navigate to the nearest airport.
Ã
DOWN Select to scroll through widgets, menus, and messages.
Hold to view the clock from any page.
Ä
UP
Select to scroll through widgets, menus, and messages.
Select to dismiss a short message or notification.
Hold to view the main menu.
Updating the Aviation Database
Before you can update the aviation database, you must create a
Garmin account and add your device.
The aviation database is valid for 28 days at a time and includes
only airport locations.
1 Connect your device to a computer using the included USB
cable.
2 Go to www.flyGarmin.com.
3 Log in to your Garmin account.
4 Follow the on-screen instructions to update the aviation
database.
®
Pairing Your Smartphone with Your Device
4 With the contacts aligned, place the device into the cradle Á
and release the arms to hold the device in place.
When you connect the device to a power source, the device
turns on, and the battery charge level appears on the screen.
5 Charge the device completely.
Keys
You should connect your D2 Bravo device to a smartphone to
access the full features of the device.
1 Go to www.garmin.com/apps, and download the Garmin
Connect™ Mobile app to your smartphone.
2 Bring your smartphone within 10 m (33 ft.) of your device.
3 On the D2 Bravo device, hold UP.
4 Select Settings > Bluetooth > Pair Mobile Device.
5 On your smartphone, open the Garmin Connect Mobile app.
6 Select an option to add your device to your Garmin Connect
account:
• If this is the first device you have paired a device with the
Garmin Connect Mobile app, follow the on-screen
instructions.
• If you have already paired another device with the Garmin
Connect Mobile app, select
> Devices > , and follow
the on-screen instructions.
Flying
Setting the Altitude Alert
You can set an alarm to vibrate when you reach a specified
altitude.
NOTE: The altitude alert is not available in low power mode.
1 From the clock, select DOWN until the altimeter page
appears.
2 Select START > Altitude Alert > Status > On.
3 Select Altitude.
4 Select the altitude at which the alert is triggered.
Setting the Barometric Pressure
You can set the current barometric pressure manually. This can
help to improve the accuracy of the pressure altitude reading.
Getting Started
1
1 From the clock, select START.
2 Select Altimeter > Barometer.
3 Select the current barometric pressure.
Starting a Flight
Before you start a flight, you should charge the device (Charging
the Device, page 1).
A flying activity starts automatically when your ground speed
exceeds 30 kn.
Navigating to the Nearest Airport
1 Hold .
A list of the nearest airports appears.
2 Select an airport.
Nearest Airport
Disabling the Automatic Flight Timer
You can disable the automatic flight timer so your device does
not automatically record fight data when your ground speed
exceeds 30 kn.
1 Hold UP.
2 Select Settings > Apps > Fly.
Activities
Your device can be used for indoor, outdoor, athletic, and fitness
activities. When you start an activity, the device displays and
records sensor data. You can save activities and share them
with the Garmin Connect community.
You can also add Connect IQ™ activity apps to your device using
your Garmin Connect account (Connect IQ Features,
page 12).
Starting an Activity
À
Á
Â
Ã
Ä
Distance to the nearest airport
Nearest airport identifier
Bearing to the nearest airport
Distance to the second nearest airport
Second nearest airport identifier
Navigating to an Airport by Its Identifier
You can navigate directly to an airport by searching for the
airport identifier.
.
1 Hold
2 Enter all or part of the alphanumeric airport identifier.
3 Select .
4 Select START.
A list of matching airports appears.
Select
the airport.
5
Horizontal Situation Indicator
When you start an activity, GPS turns on automatically (if
required). When you stop the activity, the device returns to
watch mode.
1 From the clock, select START.
2 Select an activity.
3 If necessary, follow the on-screen instructions to enter
additional information.
4 If necessary, wait while the device connects to your ANT+
sensors.
If
5 the activity requires GPS, go outside, and wait while the
device locates satellites.
6 Select START to start the timer.
NOTE: The device does not record your activity data until
you start the timer.
®
Stopping an Activity
NOTE: Some options are not available for some activities.
1 Select STOP.
2 Select an option:
• To follow your track back to the starting point of your
activity, select TracBack.
• To resume your activity, select Resume.
• To save the activity and return to watch mode, select
Save.
• To discard the activity and return to watch mode, select
Discard.
• To suspend your activity and resume it at a later time,
select Resume Later.
Skiing
Going Downhill Skiing or Snowboarding
À
Course deviation distance. The dots indicate your distance off
course.
Á
To-and-from indicator. Indicates whether you are headed toward or
away from the waypoint.
Â
Ã
Ä
Bearing to the nearest airport.
Course deviation indicator (CDI). Indicates the location of the
desired course line in relation to your location.
Distance to destination.
Stopping Navigation
Hold UP, and select Stop Navigation.
2
Before you go skiing or snowboarding, you should charge the
device (Charging the Device, page 1).
1 From the clock, select START.
2 Select Ski / Board.
3 Go outside, and wait while the device locates satellites.
4 Select START to start the timer.
History is recorded only while the timer is running.
5 Start your activity.
The auto run feature is turned on by default. This feature
automatically records new ski runs based on your movement.
The timer pauses when you stop moving downhill and when
you are on a chairlift. The timer remains paused during the
chairlift ride.
Activities
6 If necessary, start moving downhill to restart the timer.
7 Select UP or DOWN to view additional data pages (optional).
8 After you complete your activity, select STOP > Save.
Viewing Your Ski Runs
Your device records the details of each skiing or snowboarding
run. You can view run details from the paused screen or while
the timer is running.
1 Start a skiing or snowboarding activity.
2 Hold UP.
3 Select View Runs.
4 Select UP and DOWN to view details of your last run, your
current run, and your total runs.
The run screens include time, distance traveled, maximum
speed, average speed, and total descent.
Running
Going for a Run
Before you go for a run, you should charge the device (Charging
the Device, page 1). Before you can use an ANT+ sensor for
your run, you must pair the sensor with your device (Pairing
ANT+ Sensors, page 17).
1 Put on your ANT+ sensors, such as a foot pod or heart rate
monitor (optional).
2 From the clock, select START.
3 Select Run.
4 When using optional ANT+ sensors, wait while the device
connects to the sensors.
5 Go outside, and wait while the device locates satellites.
6 Select START to start the timer.
History is recorded only while the timer is running.
7 Start your activity.
8 Select LAP to record laps (optional).
9 Select UP or DOWN to view additional data pages (optional).
10 After you complete your activity, select STOP > Save.
Using the Metronome
The metronome feature plays tones at a steady rhythm to help
you improve your performance by training at a faster, slower, or
more consistent cadence.
1 Hold UP.
2 Select Settings > Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select Metronome > Status > On.
5 Select an option:
• Select Beats / Minute to enter a value based on the
cadence you want to maintain.
• Select Alert Frequency to customize the frequency of the
beats.
• Select Sounds to customize the metronome tone and
vibration.
6 If necessary, select Preview to listen to the metronome
feature before you run.
7 Hold DOWN to return to the clock.
8 Go for a run (Going for a Run, page 3).
The metronome starts automatically.
9 During your run, select UP or DOWN to view the metronome
screen.
10 If necessary, hold UP to change the metronome settings.
Activities
Biking
Going for a Ride
Before you go for a ride, you should charge the device
(Charging the Device, page 1). Before you can use an ANT+
sensor for your ride, you must pair the sensor with your device
(Pairing ANT+ Sensors, page 17).
1 Pair your ANT+ sensors, such as a heart rate monitor, speed
sensor, or cadence sensor (optional).
2 From the clock, select START.
3 Select Bike.
4 When using optional ANT+ sensors, wait while the device
connects to the sensors.
5 Go outside, and wait while the device locates satellites.
6 Select START to start the timer.
History is recorded only while the timer is running.
7 Start your activity.
8 Select UP or DOWN to view additional data pages (optional).
9 After you complete your activity, select STOP > Save.
Swimming
NOTICE
The device is intended for surface swimming. Scuba diving with
the device may damage the product and will void the warranty.
NOTE: The device cannot record heart rate data while
swimming.
Going for a Pool Swim
Before you go for a swim, you should charge the device
(Charging the Device, page 1).
1 From the clock, select START.
2 Select Pool Swim.
3 Select your pool size, or enter a custom size.
4 Select START to start the timer.
History is recorded only while the timer is running.
5 Start your activity.
The device automatically records swim intervals and lengths.
6 Select UP or DOWN to view additional data pages (optional).
7 When resting, select LAP to pause the timer.
8 Select LAP to restart the timer.
9 After you complete your activity, select STOP > Save.
Swim Terminology
Length: One trip down the pool.
Interval: One or more consecutive lengths. A new interval starts
after a rest.
Stroke: A stroke is counted every time your arm wearing the
device completes a full cycle.
Swolf: Your swolf score is the sum of the time for one pool
length and the number of strokes for that length. For
example, 30 seconds plus 15 strokes equals a swolf score of
45. Swolf is a measurement of swimming efficiency and, like
golf, a lower score is better.
Stroke Types
Stroke type identification is available only for pool swimming.
Your stroke type is identified at the end of a length. Stroke types
appear when you are viewing interval history. You can also
select stroke type as a custom data field (Customizing the Data
Screens, page 14).
Free
Freestyle
Back
Backstroke
3
Breast Breaststroke
Fly
Butterfly
Mixed More than one stroke type in an interval
Drill
Used with drill logging (Training with the Drill Log, page 4)
Resting During Pool Swimming
The default rest screen displays two rest timers. It also displays
time and distance for the last completed interval.
NOTE: Swim data is not recorded during a rest.
1 During your swim activity, select LAP to start a rest.
The display reverses to white text on a black background,
and the rest screen appears.
2 During a rest, select UP or DOWN to view other data screens
(optional).
3 Select LAP, and continue swimming.
4 Repeat for additional rest intervals.
Training with the Drill Log
The drill log feature is available only for pool swimming. You can
use the drill log feature to manually record kick sets, one-arm
swimming, or any type of swimming that is not one of the four
major strokes. The drill time is recorded, and you must enter the
distance.
TIP: You can customize the data screens and data fields for
your pool swim activity (Customizing the Data Screens,
page 14).
1 From the clock, select START.
2 Select Pool Swim.
3 During your pool swim activity, select UP or DOWN to view
the drill log screen.
4 Select LAP to start the drill timer.
5 After completing a drill interval, select LAP.
The drill timer stops, but the activity timer continues to record
the entire swim session.
6 Select a distance for the completed drill.
Distance increments are based on the pool size selected for
the activity profile.
7 Select an option:
• To start another drill interval, select LAP.
• To start a swim interval, select UP or DOWN to return to
the swim training screens.
8 After you complete your activity, select STOP > Save.
Training
Setting Up Your User Profile
You can update your gender, birth year, height, weight, heart
rate zone, and power zone settings. The device uses this
information to calculate accurate training data.
1 Hold UP.
2 Select Fitness > My Stats > User Profile.
3 Select an option.
Fitness Goals
Knowing your heart rate zones can help you measure and
improve your fitness by understanding and applying these
principles.
• Your heart rate is a good measure of exercise intensity.
• Training in certain heart rate zones can help you improve
cardiovascular capacity and strength.
• Knowing your heart rate zones can prevent you from
overtraining and can decrease your risk of injury.
4
If you know your maximum heart rate, you can use the table
(Heart Rate Zone Calculations, page 4) to determine the best
heart rate zone for your fitness objectives.
If you do not know your maximum heart rate, use one of the
calculators available on the Internet. Some gyms and health
centers can provide a test that measures maximum heart rate.
The default maximum heart rate is 220 minus your age.
About Heart Rate Zones
Many athletes use heart rate zones to measure and increase
their cardiovascular strength and improve their level of fitness. A
heart rate zone is a set range of heartbeats per minute. The five
commonly accepted heart rate zones are numbered from 1 to 5
according to increasing intensity. Generally, heart rate zones are
calculated based on percentages of your maximum heart rate.
Setting Your Heart Rate Zones
The device uses your user profile information from the initial
setup to determine your default heart rate zones. The device
has separate heart rate zones for running and cycling. For the
most accurate calorie data during your activity, set your
maximum heart rate. You can also set each heart rate zone and
enter your resting heart rate manually. You can manually adjust
your zones on the device or using your Garmin Connect
account.
1 Hold UP.
2 Select Fitness > My Stats > User Profile > Heart Rate
Zones.
3 Select Default to view the default values (optional).
The default values can be applied to running and cycling.
4 Select Running or Cycling.
5 Select Preference > Set Custom > Based On.
6 Select an option:
• Select BPM to view and edit the zones in beats per
minute.
• Select %Max. HR to view and edit the zones as a
percentage of your maximum heart rate.
• Select %HRR to view and edit the zones as a percentage
of your heart rate reserve (maximum heart rate minus
resting heart rate).
7 Select Max. HR, and enter your maximum heart rate.
8 Select a zone, and enter a value for each zone.
9 Select Resting HR, and enter your resting heart rate.
Heart Rate Zone Calculations
Zone % of
Maximum
Heart Rate
Perceived Exertion
Benefits
1
50–60%
Relaxed, easy pace,
rhythmic breathing
Beginning-level
aerobic training,
reduces stress
2
60–70%
Comfortable pace,
slightly deeper
breathing, conversation
possible
Basic cardiovascular
training, good
recovery pace
3
70–80%
Moderate pace, more
difficult to hold
conversation
Improved aerobic
capacity, optimal
cardiovascular training
4
80–90%
Fast pace and a bit
Improved anaerobic
uncomfortable, breathing capacity and
forceful
threshold, improved
speed
5
90–100%
Sprinting pace,
unsustainable for long
period of time, labored
breathing
Anaerobic and
muscular endurance,
increased power
Training
About Lifetime Athletes
A lifetime athlete is an individual who has trained intensely for
many years (with the exception of minor injuries) and has a
resting heart rate of 60 beats per minute (bpm) or less.
Setting Your Power Zones
The values for the zones are default values and may not match
your personal abilities. If you know your functional threshold
power (FTP) value, you can enter it and allow the software to
calculate your power zones automatically. You can manually
adjust your zones on the device or using your Garmin Connect
account.
1 Hold UP.
2 Select Fitness > My Stats > User Profile > Power Zones >
Based On.
3 Select an option:
• Select Watts to view and edit the zones in watts.
• Select % FTP to view and edit the zones as a percentage
of your functional threshold power.
4 Select FTP, and enter your FTP value.
5 Select a zone, and enter a value for each zone.
6 If necessary, select Minimum, and enter a minimum power
value.
Activity Tracking
Turning On Activity Tracking
The activity tracking feature records your daily step count, step
goal, distance traveled, and calories burned for each recorded
day. Your calories burned includes your base metabolism plus
activity calories.
Activity tracking can be enabled during the initial device setup,
or at any time.
NOTE: Turning on activity tracking can decrease the battery life
between charges.
1 Hold UP.
2 Select Settings > Activity Tracking > Status > On.
Your step count does not appear until the device locates
satellites and sets the time automatically. The device may
need a clear view of the sky to locate satellite signals.
The number of steps taken during the day appears on the
activity tracking widget. The step count is updated periodically.
Using the Move Alert
Before you can use the move alert, you must turn on activity
tracking.
Sitting for prolonged periods of time can trigger undesirable
metabolic state changes. The move alert reminds you to keep
moving. After one hour of inactivity, Move! and the red bar
appear. The device also beeps or vibrates if audible tones are
turned on (System Settings, page 16).
Go for a short walk (at least a couple of minutes) to reset the
move alert.
Auto Goal
Your device creates a daily step goal automatically, based on
your previous activity levels. As you move during the day, the
device shows your progress toward your daily goal À.
If you choose not to use the auto goal feature, you can set a
personalized step goal on your Garmin Connect account.
Sleep Tracking
During sleep mode, the device monitors your rest. Sleep
statistics include total hours of sleep, periods of movement, and
periods of restful sleep.
Using Sleep Mode
Before you can use sleep tracking, you must be wearing the
device.
1 From the watch face, select UP or DOWN to view the activity
tracking widget.
Select
START > Yes.
2
3 When you wake, select STOP > Yes to exit sleep mode.
NOTE: If you forget to put the device into sleep mode, you
can enter your sleep and wake times manually into your
Garmin Connect account to view your sleep statistics.
Workouts
You can create custom workouts that include goals for each
workout step and for varied distances, times, and calories. You
can create workouts using Garmin Connect or select a training
plan that has built-in workouts from Garmin Connect, and
transfer them to your device.
You can schedule workouts using Garmin Connect. You can
plan workouts in advance and store them on your device.
Following a Workout From the Web
Before you can download a workout from Garmin Connect, you
must have a Garmin Connect account (Garmin Connect,
page 13).
1 Connect the device to your computer.
2 Go to www.garminconnect.com.
3 Create and save a new workout.
4 Select Send to Device, and follow the on-screen
instructions.
5 Disconnect the device.
Starting a Workout
Before you can start a workout, you must download a workout
from your Garmin Connect account.
1 Hold UP.
2 Select Fitness > Training > My Workouts.
3 Select a workout.
4 Select Do Workout.
5 If necessary, select an activity type.
6 Select START to start the timer.
After you begin a workout, the device displays each step of the
workout, the target (optional), and the current workout data.
About the Training Calendar
The training calendar on your device is an extension of the
training calendar or schedule you set up in Garmin Connect.
After you have added a few workouts to the Garmin Connect
calendar, you can send them to your device. All scheduled
workouts sent to the device appear in the training calendar list
by date. When you select a day in the training calendar, you can
view or do the workout. The scheduled workout stays on your
device whether you complete it or skip it. When you send
scheduled workouts from Garmin Connect, they overwrite the
existing training calendar.
Using Garmin Connect Training Plans
Before you can download and use a training plan from Garmin
Connect, you must have a Garmin Connect account (Garmin
Connect, page 13).
Training
5
You can browse Garmin Connect to find a training plan,
schedule workouts and courses, and download the plan to your
device.
1 Connect the device to your computer.
2 Go to www.garminconnect.com.
3 Select and schedule a training plan.
4 Review the training plan in your calendar.
5 Select , and follow the on-screen instructions.
Interval Workouts
You can create interval workouts based on distance or time. The
device saves your custom interval workout until you create
another interval workout. You can use open intervals for track
workouts and when you are running a known distance. When
you select LAP, the device records an interval and moves to a
rest interval.
Creating an Interval Workout
1 Hold UP.
2 Select Fitness > Training > Intervals > Edit > Interval >
3
4
5
6
7
8
Type.
Select Distance, Time, or Open.
TIP: You can create an open-ended interval by setting the
type to Open.
Select Duration, enter a distance or time interval value for
the workout, and select .
Select Rest > Type.
Select Distance, Time, or Open.
If necessary, enter a distance or time value for the rest
interval, and select .
Select one or more options:
• To set the number of repetitions, select Repeat.
• To add an open-ended warm up to your workout, select
Warm Up > On.
• To add an open-ended cool down to your workout, select
Cool Down > On.
Starting an Interval Workout
1 Hold UP.
2 Select Fitness > Training > Intervals > Do Workout.
3 Select an activity.
4 Select START to start the timer.
5 When your interval workout has a warm up, select LAP to
begin the first interval.
6 Follow the on-screen instructions.
After you complete all of the intervals, a message appears.
Stopping an Interval Workout
• At any time, select LAP to end an interval.
• At any time, select STOP to stop the timer.
• If you added a cool down to your interval workout, select LAP
to end the interval workout.
Using Virtual Partner
®
Your Virtual Partner is a training tool designed to help you meet
your goals.
1 Hold UP.
2 Select Settings > Apps.
3 Select an activity.
Virtual Partner is not available for all activities.
4 Select Data Screens > Virtual Partner > Status > On.
5 Select Set Pace or Set Speed.
6
6 Enter a value.
7 Begin your activity.
8 Select UP or DOWN to scroll to the Virtual Partner screen
and see who is leading.
Setting a Training Target
The training target feature works with the Virtual Partner feature
so you can train toward a set distance, distance and time,
distance and pace, or distance and speed goal. During your
training activity, the device gives you real-time feedback about
how close you are to achieving your training target.
1 Hold UP.
2 Select Fitness > Training > Set a Target.
3 Select an activity.
4 Select an option:
• Select Distance Only to select a preset distance or enter
a custom distance.
• Select Distance and Time to select a distance and time
target.
• Select Distance and Pace or Distance and Speed to
select a distance and pace or speed target.
The training target screen appears indicating your estimated
finish time. The estimated finish time is based on your current
performance and the time remaining.
Select
START to start the timer.
5
6 After you complete your activity, select STOP > Save.
Cancelling a Training Target
1 During an activity, hold UP.
2 Select Fitness > Training > Cancel Target > Yes.
Racing a Previous Activity
You can race a previously recorded or downloaded activity. This
feature works with the Virtual Partner feature so you can see
how far ahead or behind you are during the activity.
NOTE: This feature is not available for all activities.
1 Hold UP.
2 Select Fitness > Training > Race an Activity.
3 Select an option:
• Select From History to select a previously recorded
activity from your device.
• Select Downloaded to select an activity you downloaded
from your Garmin Connect account.
4 Select the activity.
The Virtual Partner screen appears indicating your estimated
finish time.
5 Select START to start the timer.
6 After you complete your activity, select STOP > Save.
Personal Records
When you complete an activity, the device displays any new
personal records you achieved during that activity. Personal
records include your fastest time over several typical race
distances and longest run or ride. For cycling, personal records
also include most ascent and best power (power meter
required).
Viewing Your Personal Records
1 Hold UP.
2 Select Fitness > My Stats > Records.
3 Select a sport.
4 Select a record.
Training
5 Select View Record.
Ground contact time: Ground contact time is the amount of
time in each step that you spend on the ground while
running. It is measured in milliseconds.
NOTE: Ground contact time is not available while walking.
Restoring a Personal Record
You can set each personal record back to the one previously
recorded.
1 Hold UP.
2 Select Fitness > My Stats > Records.
3 Select a sport.
4 Select a record to restore.
5 Select Previous > Yes.
NOTE: This does not delete any saved activities.
Training with Running Dynamics
Before you can view running dynamics, you must put on the
HRM-Run accessory and pair it with your device (Pairing ANT+
Sensors, page 17). If your D2 Bravo was packaged with the
HRM-Run accessory, the devices are already paired, and the
D2 Bravo is set to display running dynamics.
1 Select an option:
• If your HRM-Run accessory and D2 Bravo device are
already paired, skip to step 8.
• If your HRM-Run accessory and D2 Bravo device are not
already paired, complete all the steps in this procedure.
2 Hold UP.
3 Select Settings > Apps.
4 Select an activity.
5 Select Data Screens > Run Dynamics > Status > Enabled.
NOTE: The running dynamics screen is not available for all
activities.
6 Select Primary Metric.
7 Select Cadence, GCT, or Vertical Osc..
The primary metric appears as the top field on the data
screen with a corresponding position on the color gauge.
8 Go for a run (Going for a Run, page 3).
9 Select UP or DOWN to view the running dynamics screen to
view your metrics.
Clearing a Personal Record
1 Hold UP.
2 Select Fitness > My Stats > Records.
3 Select a sport.
4 Select a record to delete.
5 Select Clear Record > Yes.
NOTE: This does not delete any saved activities.
Clearing All Personal Records
1 Hold UP.
2 Select Fitness > My Stats > Records.
NOTE: This does not delete any saved activities.
3 Select a sport.
4 Select Clear All Records > Yes.
The records are deleted for that sport only.
Running Dynamics
You can use your compatible D2 Bravo device paired with the
HRM-Run™ accessory to provide real-time feedback about your
running form. If your D2 Bravo device was packaged with the
HRM-Run accessory, the devices are already paired.
The HRM-Run accessory has an accelerometer in the module
that measures torso movement in order to calculate three
running metrics: cadence, vertical oscillation, and ground
contact time.
Cadence: Cadence is the number of steps per minute. It
displays total steps (right and left combined).
Vertical oscillation: Vertical oscillation is your bounce while
running. It displays the vertical motion of your torso,
measured in centimeters for each step.
Color Gauges and Running Dynamics Data
The running dynamics screen displays a color gauge for the primary metric. You can display cadence, vertical oscillation, or ground
contact time as the primary metric. The color gauge shows you how your running dynamics data compares to those of other
runners. The color zones are based on percentiles.
Garmin has researched many runners of all different levels. The data values in the red or orange zones are typical for less
experienced or slower runners. The data values in the green, blue, or purple zones are typical for more experienced or faster
runners. Less experienced runners tend to exhibit longer ground contact times, higher vertical oscillation, and lower cadence than
more experienced runners. However, taller runners typically have slightly slower cadences and slightly higher vertical oscillation. Go
to www.garmin.com for more information on running dynamics. For additional theories and interpretations of running dynamics data,
you can search reputable running publications and websites.
Color Zone
Percentile in Zone
Cadence Range
Vertical Oscillation Range
Ground Contact Time Range
Purple
>95
>185 spm
<6.7 cm
<208 ms
Blue
70–95
174–185 spm
6.7–8.3 cm
208–240 ms
Green
30–69
163–173 spm
8.4–10.0 cm
241–272 ms
Orange
5–29
151–162 spm
10.1–11.8 cm
273–305 ms
Red
<5
<151 spm
>11.8 cm
>305 ms
Tips for Missing Running Dynamics Data
If running dynamics data does not appear, you can try these
tips.
• Make sure you have the HRM-Run accessory.
Training
Accessories with running dynamics have on the front of the
module.
• Pair the HRM-Run accessory with your D2 Bravo device
again, according to the instructions.
7
• If the running dynamics data display shows only zeros, make
sure the heart rate monitor is worn right-side up.
NOTE: Ground contact time appears only while running. It is
not calculated while walking.
About VO2 Max. Estimates
VO2 max. is the maximum volume of oxygen (in milliliters) you
can consume per minute per kilogram of body weight at your
maximum performance. In simple terms, VO2 max. is an
indication of athletic performance and should increase as your
level of fitness improves. VO2 max. estimates are provided and
supported by Firstbeat Technologies Ltd. The D2 Bravo device
has separate VO2 max. estimates for running and cycling. You
can use your Garmin device paired with a compatible heart rate
monitor and power meter to display your cycling VO2 max.
estimate. You can use your Garmin device paired with a
compatible heart rate monitor to display your running VO2 max.
estimate.
Your VO2 max. estimate appears as a number and position on
the color gauge.
Purple
Superior
Blue
Excellent
Green
Good
Orange
Fair
Red
Poor
VO2 max. data and analysis is provided with permission from
The Cooper Institute . For more information, see the appendix
(VO2 Max. Standard Ratings, page 8), and go to
www.CooperInstitute.org.
Getting Your VO2 Max. Estimate for Running
Before you can view your VO2 max. estimate, you must put on
the heart rate monitor and pair it with your device (Pairing ANT+
Sensors, page 17). If your D2 Bravo device was packaged
with a heart rate monitor, the devices are already paired. For the
most accurate estimate, complete the user profile setup (Setting
Up Your User Profile, page 4), and set your maximum heart rate
(Setting Your Heart Rate Zones, page 4).
NOTE: The estimate may seem inaccurate at first. The device
requires a few runs to learn about your running performance.
1 Run for at least 10 minutes outdoors.
2 After your run, select Save.
3 Hold UP.
4 Select Fitness > My Stats > VO2 Max. > Running.
Getting Your VO2 Max. Estimate for Cycling
Before you can view your VO2 max. estimate, you must put on
the heart rate monitor, install the power meter, and pair them
with your D2 Bravo device (Pairing ANT+ Sensors, page 17). If
your D2 Bravo device was packaged with a heart rate monitor,
the devices are already paired. For the most accurate estimate,
complete the user profile setup (Setting Up Your User Profile,
page 4) and set your maximum heart rate (Setting Your Heart
Rate Zones, page 4).
NOTE: The estimate may seem inaccurate at first. The device
requires a few rides to learn about your cycling performance.
1 Ride at a steady, high intensity for at least 20 minutes
outdoors.
2 After your ride, select Save.
3 Hold UP.
4 Select Fitness > My Stats > VO2 Max. > Cycling.
®
VO2 Max. Standard Ratings
These tables include standardized classifications for VO2 max. estimates by age and gender.
Males
Percentile
20–29
30–39
40–49
50–59
60–69
70–79
Superior
95
55.4
54
52.5
48.9
45.7
42.1
Excellent
80
51.1
48.3
46.4
43.4
39.5
36.7
Good
60
45.4
44
42.4
39.2
35.5
32.3
Fair
40
41.7
40.5
38.5
35.6
32.3
29.4
Poor
0–40
<41.7
<40.5
<38.5
<35.6
<32.3
<29.4
Females
Percentile
20–29
30–39
40–49
50–59
60–69
70–79
Superior
95
49.6
47.4
45.3
41.1
37.8
36.7
Excellent
80
43.9
42.4
39.7
36.7
33
30.9
Good
60
39.5
37.8
36.3
33
30
28.1
Fair
40
36.1
34.4
33
30.1
27.5
25.9
Poor
0–40
<36.1
<34.4
<33
<30.1
<27.5
<25.9
Data reprinted with permission from The Cooper Institute. For more information, go to www.CooperInstitute.org.
NOTE: The projections may seem inaccurate at first. The device
Viewing Your Predicted Race Times
requires a few runs to learn about your running performance.
Before you can view your projected race times (running only),
you must put on a heart rate monitor and pair it with your device. 1 Put on your heart rate monitor, and go for a run.
For the most accurate estimate, complete the user profile setup
2 Hold UP.
(Setting Up Your User Profile, page 4), and set your maximum
3 Select Fitness > My Stats > Race Predictor.
heart rate (Setting Your Heart Rate Zones, page 4).
Your projected race times appear for 5K, 10K, half marathon,
Your device uses the VO2 max. estimate (About VO2 Max.
and marathon distances.
Estimates, page 8) and published data sources to provide a
target race time based on your current state of fitness. This
Recovery Advisor
projection also presumes you have completed the proper
training for the race.
You can use your Garmin device paired with the heart rate
monitor to display how much time remains before you are fully
8
Training
recovered and ready for the next hard workout. The recovery
advisor feature includes recovery time and recovery check.
Recovery advisor technology is provided and supported by
Firstbeat.
Recovery check: The recovery check provides a real-time
indication of your state of recovery within the first several
minutes of an activity.
Recovery time: The recovery time appears immediately
following an activity. The time counts down until it is optimal
for you to attempt another hard workout.
widgets, including activity tracking, a compass, and smartphone
notifications.
Select an option:
• To cycle through active widgets, select UP or DOWN.
• To cycle through inactive widgets, hold UP, select System
> Widgets, and select UP or DOWN.
Time and Date
Turning On the Recovery Advisor
Before you can use the recovery advisor feature, you must put
on the heart rate monitor and pair it with your device (Pairing
ANT+ Sensors, page 17). If your D2 Bravo was packaged with
a heart rate monitor, the devices are already paired. For the
most accurate estimate, you must complete the user profile
setup (Setting Up Your User Profile, page 4), and set your
maximum heart rate (Setting Your Heart Rate Zones, page 4).
1 Hold UP.
2 Select Fitness > My Stats > Recovery Advisor > Status >
On.
3 Go for a run.
Within the first several minutes of your run, a recovery check
appears, showing your real-time state of recovery.
After
your run, select Save.
4
The recovery time appears. The maximum time is 4 days,
and the minimum time is 6 hours.
Bluetooth connectivity status
®
À
Á
Â
Ã
Date
Digital time
Coordinated Universal Time
Altimeter
Viewing Your Recovery Time
Before you can view your recovery time, you must enable the
recovery advisor.
1 Hold UP.
2 Select Fitness > My Stats > Recovery Advisor.
The recovery time appears. The maximum time is 4 days,
and the minimum time is 6 hours.
About Training Effect
Training Effect measures the impact of an activity on your
aerobic fitness. Training Effect accumulates during the activity.
As the activity progresses, the training effect value increases,
telling you how the activity has improved your fitness. Training
Effect is determined by your user profile information, heart rate,
duration, and intensity of your activity.
It is important to know that your Training Effect numbers (from
1.0 to 5.0) may seem abnormally high during your first few runs.
It takes several activities for the device to learn your aerobic
fitness.
À
Á
Â
Alert altitude
Pressure altitude
Barometric pressure
Compass
Training Effect Description
From 1.0 to 1.9 Helps recovery (short activities). Improves endurance
with longer activities (longer than 40 min.).
From 2.0 to 2.9 Maintains your aerobic fitness.
From 3.0 to 3.9 Improves your aerobic fitness if repeated as part of
your weekly training program.
From 4.0 to 4.9 Highly improves your aerobic fitness if repeated one
or two times per week with adequate recovery time.
5.0
À
Á
Â
Compass ring
Direction of travel in degrees (tracking mode only)
Direction of travel
Temperature
Causes temporary overload with high improvement.
Train up to this number with extreme care. Requires
additional recovery days.
Training effect technology is provided and supported by
Firstbeat Technologies Ltd. For more information, go to
www.firstbeattechnologies.com.
Viewing Widgets
From the clock, you can quickly cycle through the active widgets
on your device. Your device comes preloaded with several
Viewing Widgets
9
À
Á
Â
Analog temperature
Digital temperature
Density altitude
Music Controls
Start/Pause
À
Á
Â
Skip
Volume
Weather
Â
Ã
Missed phone call
Additional notifications
METAR
À
Á
Â
Ã
Ä
Å
Nearest airport identifier
Aviation flight category
Wind direction, speed, and gusts
Visibility in statute miles
Sky conditions
Weather conditions
Clock
Setting the Alarm
À
Á
Â
Ã
Ä
Current weather conditions
Current temperature
Chance of precipitation
Daily low temperature
Daily high temperature
Calendar
You can set up to ten separate alarms. Each alarm can be set to
sound once or to repeat regularly.
1 Hold UP.
2 Select Clock > Alarm Clock > Add New.
3 Select Status > On.
4 Select Time, and enter the alarm time.
5 Select Notification, and select a type of notification
(optional).
6 Select Repeat, and select when the alarm should repeat,
such as daily, on weekdays, or once (optional).
Starting the Countdown Timer
1 Hold UP.
2
3
4
5
À
Á
Â
Current activity
Next activity
Additional activities
Notifications
6
TIP: You can select to view the countdown timer.
Select Clock > Timer.
Enter the time.
If necessary, select Restart > On to automatically restart the
timer after it expires.
If necessary, select Notification, and select a type of
notification.
Select Start Timer.
Using the Stopwatch
1 Hold UP.
TIP: You can select
to view the countdown timer.
2 Select Clock > Stopwatch.
3 From the clock, select START.
Setting Sunrise and Sunset Alerts
À
Á
10
Instant message
Email
You can set the sunrise and sunset alerts to sound a specific
number of minutes or hours before the actual sunrise or sunset
occurs.
1 Hold UP.
2 Select Clock > Alerts.
3 Select an option:
• Select Til Sunset > Status > On.
Clock
• Select Til Sunrise > Status > On.
4 Select Time, and enter the time.
Navigation
Saving Your Location
You can save your current location to navigate back to it later.
1 Hold UP.
2 Select Save Location.
3 Follow the on-screen instructions.
• To toggle between panning up and down, panning left and
right, or zooming, select START.
• To pan or zoom the map, select UP and DOWN.
• To quit, select BACK.
Navigating To Your Starting Point
You can navigate back to the starting point of your track or
activity along the path you traveled. This feature is available only
for activities that use GPS.
During an activity, select STOP > TracBack.
Navigating to a Destination
You can use your device to navigate to a destination or follow a
course. When you start navigating, you can choose the activity
to be used while traveling to your destination, such as hiking,
running, or biking. If you are already recording an activity when
you start navigation, the device continues to record the current
activity while navigating.
1 Hold UP.
2 Select Navigation.
3 Select a category.
4 Respond to the on-screen prompts to choose a destination.
5 Select Go To.
6 Select an activity.
Navigation information appears.
7 Select START to begin navigation.
8 Select UP or DOWN to view additional data pages (optional).
Your current location À and track to follow Á appear on the
map.
Altimeter and Barometer
The device contains an internal altimeter and barometer. The
device collects altimeter and barometer data continuously, even
in low-power mode. The altimeter displays your approximate
elevation based on pressure changes. The barometer displays
environmental pressure data based on the fixed elevation where
the altimeter was most recently calibrated (Altimeter Settings,
page 16).
History
Navigating with Sight 'N Go
You can point the device at an object in the distance, such as a
water tower, lock in the direction, and then navigate to the
object.
1 Hold UP.
2 Select Navigation > Sight 'N Go.
3 Point the top of the watch at an object and select START.
4 Select an activity.
Navigation information appears.
5 Select START to begin navigation.
6 Select UP or DOWN to view additional data pages (optional).
Compass
The device has a 3-axis compass with automatic calibration.
The compass features and appearance change depending on
your activity, whether GPS is enabled, and whether you are
navigating to a destination. You can manually change the
compass settings (Compass Settings, page 16).
Map
represents your location on the map during flying activities.
represents your location on the map during non-flying activities.
Location names and symbols appear on the map. When you are
navigating to a destination, your route is marked with a line on
the map.
• Map navigation (Panning and Zooming the Map, page 11)
• Map settings (Customizing Map Features, page 16)
Panning and Zooming the Map
1 While navigating, select UP or DOWN to view the map.
2 Hold UP.
3 Select Pan/Zoom.
4 Select an option:
Navigation
History includes time, distance, calories, average pace or speed,
lap data, and optional ANT+ sensor information.
NOTE: When the device memory is full, your oldest data is
overwritten.
Using History
History contains previous activities you have saved on your
device.
1 Hold UP.
2 Select History > Activities.
3 Select an activity.
4 Select an option:
• To view additional information about the activity, select
Details.
• To select a lap and view additional information about each
lap, select Laps.
• To select an interval and view additional information about
each interval, select Intervals.
• To view the activity on a map, select Map.
• To navigate in reverse the path you traveled for the
activity, select TracBack (Navigating To Your Starting
Point, page 11).
• To delete the selected activity, select Delete.
• To navigate the path you traveled for the activity, select
Go.
Viewing Your Time in Each Heart Rate Zone
Before you can view heart rate zone data, you must pair your
device with a compatible heart rate monitor, complete an
activity, and save the activity.
Viewing your time in each heart rate zone can help you adjust
your training intensity.
11
1
2
3
4
Hold UP.
Select History > Activities.
Select an activity.
Select Time in Zone.
Viewing Step Totals
1 From the Garmin Connect Mobile app, select
IQ Store.
2 Select your D2 Bravo device.
> Connect
Downloading Connect IQ Features Using
Your Computer
Before you can view step totals, you must turn on activity
tracking (Turning On Activity Tracking, page 5).
1 Hold UP.
2 Select History > Steps.
3 Select a day to view the accumulated step count, step goal,
distance traveled, and calories burned.
1
2
3
4
5
Viewing Data Totals
Widgets
You can view the accumulated distance and time data saved to
your device.
1 Hold UP.
2 Select History > Totals.
3 If necessary, select an activity.
4 Select an option to view weekly or monthly totals.
Your device comes preloaded with widgets that provide at-aglance information. Some widgets require a Bluetooth
connection to a compatible smartphone.
Notifications: Alerts you to incoming calls and texts based on
your smartphone notification settings.
Calendar: Displays upcoming meetings from your smartphone
calendar.
Music controls: Provides music player controls for your
smartphone.
Weather: Displays the current temperature and weather
forecast.
Activity Tracking: Tracks your daily step count, step goal,
distance traveled, calories burned, and sleep statistics.
Sensor Information: Displays information from an internal
sensor or a connected ANT+ sensor.
Compass: Displays an electronic compass.
METARs: Displays the current sky conditions, weather
conditions, visibility distance, temperature, dew point,
barometric pressure, and wind information.
Deleting History
1 Hold UP.
2 Select History > Options.
3 Select an option:
• Select Delete All Activities to delete all activities from the
history.
• Select Reset Totals to reset all distance and time totals.
NOTE: This does not delete any saved activities.
4 Confirm your selection.
Using the Odometer
The odometer automatically records the total distance traveled
and elevation gained.
1 Hold UP.
2 Select Fitness > My Stats > Odometer.
3 Select an option to view the odometer totals.
4 If necessary, select a total, and select Yes to reset the
odometer to zero.
Connect IQ Features
You can add Connect IQ features to your watch from Garmin
and other providers using the Garmin Connect Mobile app. You
can customize your device with watch faces, data fields,
widgets, and apps.
Watch Faces: Allow you to customize the appearance of the
clock.
Data Fields: Allow you to download new data fields that present
sensor, activity, and history data in new ways. You can add
Connect IQ data fields to built-in features and pages.
Widgets: Provide information at a glance, including sensor data
and notifications.
Apps: Add interactive features to your watch, such as new
outdoor and fitness activity types.
Downloading Connect IQ Features
Before you can download Connect IQ features from the Garmin
Connect Mobile app, you must pair your D2 Bravo device with
your smartphone running the Garmin Connect Mobile app.
12
Connect the device to your computer using a USB cable.
Go to www.garminconnect.com.
From your devices widget, select Connect IQ Store.
Select a Connect IQ feature.
Select Send to Device, and follow the on-screen
instructions.
Viewing Widgets
From the clock, you can quickly cycle through the active widgets
on your device. Your device comes preloaded with several
widgets, including activity tracking, a compass, and smartphone
notifications.
Select an option:
• To cycle through active widgets, select UP or DOWN.
• To cycle through inactive widgets, hold UP, select System
> Widgets, and select UP or DOWN.
VIRB Remote
®
The VIRB remote function allows you to control your VIRB
action camera using your device. Go to www.garmin.com/VIRB
to purchase a VIRB action camera.
Controlling a VIRB Action Camera
Before you can use the VIRB remote function, you must enable
the remote setting on your VIRB camera. See the VIRB Series
Owner's Manual for more information. You must also set the
VIRB widget to be shown in the widget loop (Customizing the
Widget Loop, page 16).
1 Turn on your VIRB camera.
2 On your D2 Bravo device, select UP or DOWN from the
watch face to view the VIRB widget.
3 Wait while the device connects to your VIRB camera.
4 Select an option:
• To record video, select START.
The video counter appears on the D2 Bravo screen.
• To stop recording video, select STOP.
• To take a photo, select DOWN.
Connect IQ Features
Connected Features
Connected features are available for your D2 Bravo device
when you connect the device to a wireless network or to a
compatible smartphone using Bluetooth wireless technology.
Some features require you to install the Garmin Connect Mobile
app on the connected smartphone. Go to www.garmin.com/apps
for more information.
Phone notifications: Displays phone notifications and
messages on your D2 Bravo device.
LiveTrack: Allows friends and family to follow your races and
training activities in real time. You can invite followers using
email or social media, allowing them to view your live data on
a Garmin Connect tracking page.
Activity uploads to Garmin Connect: Automatically sends
your activity to your Garmin Connect account as soon as you
finish recording the activity.
Connect IQ: Allows you to extend your device features with new
watch faces, widgets, apps, and data fields.
Garmin Connect
You can connect with your friends on Garmin Connect. Garmin
Connect gives you the tools to track, analyze, share, and
encourage each other. Record the events of your active lifestyle
including runs, walks, rides, swims, hikes, triathlons, and more.
To sign up for a free account, go to www.garminconnect.com
/start.
Store your activities: After you complete and save an activity
with your device, you can upload that activity to Garmin
Connect and keep it as long as you want.
Analyze your data: You can view more detailed information
about your activity, including time, distance, elevation, heart
rate, calories burned, cadence, VO2 max., running dynamics,
an overhead map view, pace and speed charts, and
customizable reports.
NOTE: Some data requires an optional accessory such as a
heart rate monitor.
Enabling Bluetooth Notifications
Before you can enable notifications, you must pair the D2 Bravo
device with a compatible mobile device (Pairing Your
Smartphone with Your Device, page 1).
1 Hold UP.
2 Select Settings > Bluetooth > Smart Notifications >
Status > On.
3 Select During Activity.
4 Select a notification preference.
5 Select a sound preference.
6 Select Watch Mode.
7 Select a notification preference.
8 Select a sound preference.
9 Select Timeout.
10 Select the amount of time the alert for a new notification
appears on the screen.
Plan your training: You can choose a fitness goal and load one
of the day-by-day training plans.
Share your activities: You can connect with friends to follow
each other's activities or post links to your activities on your
favorite social networking sites.
Using Garmin Connect Mobile
Viewing Notifications
1 From the clock, select UP to view the notifications widget.
2 Select START, and select a notification.
3 If necessary, select DOWN to scroll through the contents of
You can upload all of your activity data to your Garmin Connect
account for comprehensive analysis. With your Garmin Connect
account, you can view a map of your activity, and share your
activities with friends. You can turn on auto upload in the Garmin
Connect Mobile app.
1 From the Garmin Connect Mobile app, hold UP.
2 Select Devices.
3 Select your D2 Bravo device, and select Device Settings.
4 Select the toggle switch to turn on auto upload.
Managing Notifications
1 Hold UP.
2 Select Settings > Bluetooth > Sync.
the notification.
4 Select BACK to return to the previous screen.
The notification remains on your D2 Bravo device until you
view it or clear it on your mobile device.
You can use your compatible mobile device to manage
notifications displayed on your D2 Bravo device.
Select an option:
• If you are using an iOS device, use the notification center
settings on your mobile device to select the items to show
on the device.
• If you are using an Android™ device, use the app settings
in the Garmin Connect Mobile app to select the items to
show on the device.
®
Turning Off Bluetooth Technology
1 Hold UP.
2 Select Settings > Bluetooth > Status > Off to turn off
Bluetooth wireless technology on your D2 Bravo device.
Refer to the owner's manual for your mobile device to turn off
Bluetooth wireless technology on your mobile device.
Connected Features
Manually Uploading Data to Garmin Connect Mobile
Using Garmin Connect on Your Computer
If you have not paired your D2 Bravo device with your
smartphone, you can upload all of your activity data to your
Garmin Connect account using your computer.
1 Connect the device to your computer using the USB cable.
2 Go to www.garminconnect.com/start.
3 Follow the on-screen instructions.
Wi‑Fi Connected Features
®
The D2 Bravo device has Wi‑Fi connected features. The Garmin
Connect Mobile app is not required for you to use Wi‑Fi
connectivity.
Activity uploads to your Garmin Connect account:
Automatically sends your activity to your Garmin Connect
account as soon as you finish recording the activity.
13
Workouts and training plans: Allows you to browse for and
select workouts and training plans on the Garmin Connect
site. The next time your device has a Wi‑Fi connection, the
files are wirelessly sent to your device.
Software updates: Your device downloads the latest software
update when a Wi‑Fi connection is available. The next time
you turn on or unlock the device, you can follow the onscreen instructions to install the software update.
Setting Up Wi‑Fi Connectivity
1 Go to www.garminconnect.com/start, and download the
Garmin Express™ application.
2 Follow the on-screen instructions to set up Wi‑Fi connectivity
with Garmin Express.
Customizing Your Device
Activity Settings
These settings allow you to customize each preloaded activity
app based on your needs. For example, you can customize data
pages and enable alerts and training features. Not all settings
are available for all activity types.
Hold UP, select Settings > Apps, and select an activity.
Data Screens: Allows you to customize data screens for the
selected activity (Customizing the Data Screens, page 14).
You can also show or hide a map data screen for some
activities.
Auto Fly: Allows a flight activity to begin automatically when the
detected climb rate exceeds a specified speed. The activity
stops when the ground speed drops below 30 kn for a
specified time.
Alerts: Sets the training or navigation alerts for the selected
activity.
Flight Timer: Allows the flight timer to start and stop
automatically when your ground speed exceeds 30 kn.
Nautical Dist.: Displays distances in nautical units.
Nautical Spd.: Displays your speed in nautical units.
Altimeter: Displays pressure altitude, or GPS altitude, when the
device has a GPS fix.
Lap Key: Enables to calculate laps.
Metronome: Plays tones at a steady rhythm to help you
improve your performance by training at a faster, slower, or
more consistent cadence (Using the Metronome, page 3).
Auto Lap: Sets the options for the Auto Lap feature (Auto Lap,
page 15).
Auto Pause: Sets the device to stop recording data when you
stop moving or when you drop below a specified speed
(Enabling Auto Pause , page 15).
Auto Climb: Enables the device to detect elevation changes
automatically using the built-in altimeter.
Auto Run: Enables the device to detect ski runs automatically
using the built-in accelerometer.
3D Speed: Calculates your speed using your elevation change
and your horizontal movement over ground (3D Speed and
Distance, page 15).
3D Distance: Calculates your distance traveled using your
elevation change and your horizontal movement over ground.
Auto Scroll: Enables you to cycle through all of the activity data
screens automatically while the timer is running (Using Auto
Scroll, page 15).
GPS: Sets the mode for the GPS antenna (UltraTrac,
page 15).
Pool Size: Sets the pool length for pool swimming (Going for a
Pool Swim, page 3).
®
®
14
Stroke Detect.: Enables stroke detection for pool swimming.
Power Save: Sets the power-save timeout settings for an
activity (Power Save Timeout Settings, page 15).
Background Color: Sets the background color of each activity
to black or white.
Accent Color: Sets the accent color of each activity to help
identify which activity is active.
Status: Shows or hides the selected activity in the apps list.
Move Up: Adjusts the position of the activity in the apps list.
Move Down: Adjusts the position of the activity in the apps list.
Remove: Deletes the activity.
NOTE: This deletes the activity from the apps list and all
user-entered activity settings. You can restore all of the
device settings to the factory default values to add a removed
activity back to the list (Restoring All Default Settings,
page 20).
Rename: Sets the activity name.
Customizing the Data Screens
You can show, hide, and change the layout and content of data
screens for each activity.
1 Hold UP.
2 Select Settings > Apps.
3 Select the activity to customize.
4 Select Data Screens.
5 Select a data screen to customize.
6 Select an option:
• Select Status to turn the data screen on or off.
• Select Layout to adjust the number of data fields on the
data screen.
• Select a field to change the data that appears in the field.
Adding a Map to an Activity
You can add the map to the data screens loop for an activity.
1 Hold UP.
2 Select Settings > Apps.
3 Select the activity to customize.
4 Select Data Screens > Map.
5 Select Status to turn the map on or off.
6 Select Orientation.
7 Select an option:
• To show north at the top of the page, select North Up.
• To show your current direction of travel toward the top of
the page, select Track Up.
8 Select User Locations to show or hide saved locations on
the map.
9 Select Auto Zoom to select automatically the optimal zoom
level for the map.
When Off is selected, you must zoom in or out manually.
Alerts
You can set alerts for each activity, which can help you to train
toward specific goals, to increase your awareness of your
environment, and to navigate to your destination. Some alerts
are available only for specific activities. There are three types of
alerts: event alerts, range alerts, and recurring alerts.
Event alert: An event alert notifies you once. The event is a
specific value. For example, you can set the device to alert
you when you reach a specified elevation.
Range alert: A range alert notifies you each time the device is
above or below a specified range of values. For example, you
can set the device to alert you when your heart rate is below
60 beats per minute (bpm) and over 210 bpm.
Customizing Your Device
Recurring alert: A recurring alert notifies you each time the
device records a specified value or interval. For example, you
can set the device to alert you every 30 minutes.
Alert Name Alert Type
Description
Cadence
Range
You can set minimum and maximum
cadence values.
Calories
Event,
recurring
You can set the number of calories.
Custom
Recurring
You can select an existing message or
create a custom message and select an
alert type.
Distance
Recurring
You can set a distance interval.
Elevation
Range
You can set minimum and maximum
elevation values.
Heart Rate Range
You can set minimum and maximum heart
rate values or select zone changes. See
About Heart Rate Zones, page 4 and
Heart Rate Zone Calculations, page 4.
Pace
Range
You can set minimum and maximum pace
values.
Power
Range
You can set the high or low power level.
Run/Walk
Recurring
You can set timed walking breaks at
regular intervals.
Speed
Range
You can set minimum and maximum
speed values.
Time
Event,
recurring
You can set a time interval.
Setting an Alert
1 Hold UP.
2 Select Settings > Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select Alerts.
5 Select an option:
• Select Add New to add a new alert for the activity.
• Select the alert name to edit an existing alert.
6 If necessary, select the type of alert.
7 Select a zone, enter the minimum and maximum values, or
enter a custom value for the alert.
8 If necessary, turn on the alert.
For event and recurring alerts, a message appears each time
you reach the alert value. For range alerts, a message appears
each time you exceed or drop below the specified range
(minimum and maximum values).
Auto Lap
Marking Laps by Distance
You can use Auto Lap to mark a lap at a specific distance
automatically. This feature is helpful for comparing your
performance over different parts of an activity (for example,
every 1 mile or 5 kilometers).
1 Hold UP.
2 Select Settings > Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select Auto Lap.
5 Select an option:
• Select Auto Lap to turn Auto Lap on or off.
• Select Auto Distance to adjust the distance between
laps.
Each time you complete a lap, a message appears that displays
the time for that lap. The device also beeps or vibrates if audible
tones are turned on (System Settings, page 16).
Customizing Your Device
If necessary, you can customize the data pages to display
additional lap data (Customizing the Data Screens, page 14).
Customizing the Lap Alert Message
You can customize one or two data fields that appear in the lap
alert message.
1 Hold UP.
2 Select Settings > Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select Auto Lap > Lap Alert.
5 Select a data field to change it.
6 Select Preview (optional).
Enabling Auto Pause
®
You can use the Auto Pause feature to pause the timer
automatically when you stop moving. This feature is helpful if
your activity includes stop lights or other places where you must
stop.
NOTE: History is not recorded while the timer is stopped or
paused.
1 Hold UP.
2 Select Settings > Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select Auto Pause.
5 Select an option:
• To pause the timer automatically when you stop moving,
select When Stopped.
• To pause the timer automatically when your pace or
speed drops below a specified level, select Custom.
3D Speed and Distance
You can set 3D speed and distance to calculate your speed or
distance using both your elevation change and your horizontal
movement over ground. You can use it during activities such as
skiing, navigating, hiking, running, or biking.
Using Auto Scroll
You can use the auto scroll feature to cycle through all of the
activity data screens automatically while the timer is running.
1 Hold UP.
2 Select Settings > Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select Auto Scroll.
5 Select a display speed.
UltraTrac
The UltraTrac feature is a GPS setting that records track points
and sensor data less frequently. Enabling the UltraTrac feature
increases battery life but decreases the quality of recorded
activities. You should use the UltraTrac feature for activities that
demand longer battery life and for which frequent sensor data
updates are less important.
Power Save Timeout Settings
The timeout settings affect how long your device stays in
training mode, for example, when you are waiting for a race to
start. Hold UP, select Settings > Apps, and select an activity.
Select Power Save to adjust the timeout settings for the activity.
Normal: Sets the device to enter low-power watch mode after 5
minutes of inactivity.
Extended: Sets the device to enter low-power watch mode after
25 minutes of inactivity. The extended mode can result in
shorter battery life between charges.
15
Watch Face Settings
You can customize the appearance of the watch face by
selecting the layout, colors, and additional data. You can also
download custom watch faces from the Connect IQ store.
Customizing the Watch Face
1 Hold UP.
2 Select Settings > Watch Face > Type.
3 Select the digital or analog watch face, or an available watch
face downloaded from the Connect IQ store.
4 If using the digital or analog watch face, select a feature to
change.
TIP: You can add additional data to the digital and analog
watch faces, including the date and day of the week. You can
also add the moon phase and a barometric trend arrow
indicating changes in air pressure to the digital watch face.
5 Follow the on-screen instructions to change the watch face
feature.
Customizing the Widget Loop
You can show, hide, or move items in the widget loop.
1 Hold UP.
2 Select Settings > Widgets.
3 Select a widget.
4 Select an option:
• Select Status to show or hide the widget from the widget
loop.
• Select Move Up or Move Down to change the location of
the widget in the widget loop.
Sensors Settings
Compass Settings
Hold UP, and select Settings > Sensors > Compass.
Calibrate: Allows you to manually calibrate the compass sensor
(Calibrating the Compass, page 16).
Display: Sets the directional heading on the compass to letters,
degrees, or milli-radians.
North Ref.: Sets the north reference of the compass (Setting the
North Reference, page 16).
Mode: Sets the compass to use electronic-sensor data only
(On), a combination of GPS and electronic-sensor data when
moving (Auto), or GPS data only (Off).
Calibrating the Compass
NOTICE
Calibrate the electronic compass outdoors. To improve heading
accuracy, do not stand near objects that influence magnetic
fields, such as vehicles, buildings, and overhead power lines.
Your device was already calibrated at the factory, and the
device uses automatic calibration by default. If you experience
irregular compass behavior, for example, after moving long
distances or after extreme temperature changes, you can
manually calibrate the compass.
1 Hold UP.
2 Select Settings > Sensors > Compass > Calibrate > Start.
3 Follow the on-screen instructions.
Setting the North Reference
You can set the directional reference used in calculating
heading information.
1 Hold UP.
2 Select Settings > Sensors > Compass > North Ref..
3 Select an option:
16
• To set geographic north as the heading reference, select
True.
• To set the magnetic declination for your location
automatically, select Magnetic.
• To set grid north (000º) as the heading reference, select
Grid.
Altimeter Settings
Hold UP, and select Altimeter.
Barometer: Allows you to set the barometric pressure manually.
Altitude Alert: Sets an alarm to vibrate when you reach a
specific altitude.
O2 Alert: Sets an alarm to vibrate when your oxygen supply
reaches a specific level.
Sync to Elevation: Allows you to synchronize the device to your
current elevation manually.
Calibrating the Barometric Altimeter
Your device was already calibrated at the factory, and the
device uses automatic calibration at your GPS starting point by
default. You can manually calibrate the barometric altimeter if
you know the correct elevation or the correct sea level pressure.
1 Hold UP.
2 Select Altimeter.
3 Select an option:
• To calibrate automatically from your GPS starting point,
select Auto Cal. > Once.
• To calibrate automatically with periodic GPS calibration
updates, select Auto Cal. > Continuous.
• To enter the current elevation, select Calibrate.
Elevation Settings
Hold UP, and select Settings > Sensors > Elevation.
Auto Cal.: Allows the altimeter to self-calibrate each time you
turn on GPS tracking.
Calibrate: Allows you to calibrate the altimeter sensor manually.
Navigation Settings
You can customize the map features and appearance when
navigating to a destination.
Customizing Map Features
1 Hold UP.
2 Select Settings > Navigation.
3 Select an option:
• Select a screen to add, remove, and customize the data
screens shown while navigating.
• Select Type to set the navigation type to course or
bearing.
System Settings
Hold UP, and select Settings > System.
User Profile: Allows you to view and customize your personal
statistics (Setting Up Your User Profile, page 4).
Hot Keys: Allows you to assign shortcuts to the device keys.
Language: Sets the language displayed on the device.
Time: Adjusts the time settings (Time Settings, page 17).
Backlight: Adjusts the backlight settings (Backlight Settings,
page 17).
Sounds: Sets the device sounds, such as key tones, alerts, and
vibrations.
Units: Sets the units of measure used on the device (Changing
the Units of Measure, page 17).
Customizing Your Device
GLONASS: The default satellite system option is GPS. You can
enable the GLONASS option for increased performance in
challenging environments and faster position acquisition.
Using the GPS and GLONASS options can reduce battery
life more than using the GPS option only.
Pos. Format: Sets the geographical position format and datum
options.
Format: Sets general format preferences, such as the pace and
speed shown during activities, and the start of the week.
Data Recording: Sets how the device records activity data. The
Smart recording option (default) allows for longer activity
recordings. The Every Second recording option provides
more detailed activity recordings, but may not record entire
activities that last for longer periods of time.
USB Mode: Sets the device to use mass storage mode or
Garmin mode when connected to a computer.
Restore Defaults: Allows you to reset user data and settings
(Restoring All Default Settings, page 20).
Software Update: Uses a Wi‑Fi connection to check for
software updates to the device.
About: Displays device, software, and license information.
when you start an activity and the sensor is active and within
range.
NOTE: If a heart rate monitor was bundled with your device, the
included heart rate monitor is already paired with your device.
1 If you are pairing a heart rate monitor, put on the heart rate
monitor (Putting On the Heart Rate Monitor, page 17).
The heart rate monitor does not send or receive data until
you put it on.
2 Bring the device within 3 m (10 ft.) of the sensor.
NOTE: Stay 10 m (33 ft.) away from other ANT+ sensors
while pairing.
3 Hold UP.
4 Select Settings > Sensors > Add New.
5 Select an option:
• Select Search All.
• Select your sensor type.
After the sensor is paired with your device, the sensor status
changes from Searching to Connected. Sensor data appears
in the data page loop or a custom data field.
Changing the Units of Measure
Putting On the Heart Rate Monitor
You can customize units of measure for distance, pace and
speed, elevation, weight, height, and temperature.
1 Hold UP.
2 Select Settings > System > Units.
3 Select a measurement type.
4 Select a unit of measure.
NOTE: If you do not have a heart rate monitor, you can skip this
task.
You should wear the heart rate monitor directly on your skin, just
below your sternum. It should be snug enough to stay in place
during your activity.
1 Snap the heart rate monitor module À onto the strap.
Time Settings
Hold UP, and select Settings > System > Time.
Time Format: Sets the device to show time in a 12-hour or 24hour format.
Set Time: Sets the time zone for the device. The Auto option
sets the time zone automatically based on your GPS position.
Time: Allows you to adjust the time if it is set to the Manual
option.
Backlight Settings
Hold UP, and select Settings > System > Backlight.
Mode: Sets the backlight to turn on manually or for keys and
alerts.
Timeout: Sets the length of time before the backlight turns off.
Brightness: Sets the brighness level of the backlight.
ANT+ Sensors
The device is compatible with these optional, wireless ANT+
accessories.
• Heart rate monitor, such as HRM-Run (Putting On the Heart
Rate Monitor, page 17)
• Bike speed and cadence sensor (Using an Optional Bike
Cadence Sensor, page 18)
• Foot pod (Foot Pod, page 18)
• Power sensor, such as Vector™
• tempe™ wireless temperature sensor (tempe, page 18)
For information about compatibility and purchasing additional
sensors, go to http://buy.garmin.com.
Pairing ANT+ Sensors
The first time you connect a sensor to your device using ANT+
wireless technology, you must pair the device and sensor. After
they are paired, the device connects to the sensor automatically
ANT+ Sensors
The Garmin logos on the module and the strap should be
right-side up.
2 Wet the electrodes Á and the contact patches  on the back
of the strap to create a strong connection between your chest
and the transmitter.
3 Wrap the strap around your chest, and connect the strap
hook à to the loop Ä.
NOTE: The care tag should not fold over.
The Garmin logos should be right-side up.
4 Bring the device within 3 m (10 ft.) of the heart rate monitor.
After you put on the heart rate monitor, it is active and sending
data.
TIP: If the heart rate data is erratic or does not appear, see the
troubleshooting tips (Tips for Erratic Heart Rate Data,
page 18).
17
Tips for Erratic Heart Rate Data
If the heart rate data is erratic or does not appear, you can try
these tips.
• Reapply water to the electrodes and contact patches (if
applicable).
• Tighten the strap on your chest.
• Warm up for 5 to 10 minutes.
• Follow the care instructions (Caring for the Heart Rate
Monitor, page 18).
• Wear a cotton shirt or thoroughly wet both sides of the strap.
Synthetic fabrics that rub or flap against the heart rate
monitor can create static electricity that interferes with heart
rate signals.
• Move away from sources that can interfere with your heart
rate monitor.
Sources of interference may include strong electromagnetic
fields, some 2.4 GHz wireless sensors, high-voltage power
lines, electric motors, ovens, microwave ovens, 2.4 GHz
cordless phones, and wireless LAN access points.
Using an Optional Bike Cadence Sensor
You can use a compatible bike cadence sensor to send data to
your device.
• Pair the sensor with your device (Pairing ANT+ Sensors,
page 17).
• Update your fitness user profile information (Setting Up Your
User Profile, page 4).
• Go for a ride (Going for a Ride, page 3).
Foot Pod
Your device is compatible with the foot pod. You can use the
foot pod to record pace and distance instead of using GPS when
you are training indoors or when your GPS signal is weak. The
foot pod is on standby and ready to send data (like the heart
rate monitor).
After 30 minutes of inactivity, the foot pod powers off to
conserve the battery. When the battery is low, a message
appears on your device. Approximately five hours of battery life
remain.
Foot Pod Calibration
The foot pod is self-calibrating. The accuracy of the speed and
distance data improves after a few outdoor runs using GPS.
Calibrating Your Foot Pod Manually
Before you can calibrate your device, you must pair your device
with the foot pod (Pairing ANT+ Sensors, page 17).
Manual calibration is recommended if you know your calibration
factor. If you have calibrated a foot pod with another Garmin
product, you may know your calibration factor.
1 Hold UP.
2 Select Settings > Sensors > Foot Pod > Cal. Factor.
3 Adjust the calibration factor:
• Increase the calibration factor if your distance is too low.
• Decrease the calibration factor if your distance is too high.
tempe
The tempe is an ANT+ wireless temperature sensor. You can
attach the sensor to a secure strap or loop where it is exposed
to ambient air, and therefore, provides a consistent source of
accurate temperature data. You must pair the tempe with your
device to display temperature data from the tempe.
18
Device Information
Contacting Garmin Aviation Product Support
• Go to www.garmin.com/support for in-country support
information.
• In the Americas, call (866) 739-5687.
• In Europe, Africa, and the Middle East, call
+44 (0) 87 085 1243.
• In Asia Pacific, call +65 6348 0378.
• In Australia, call +61 2 8882 6134.
Viewing Device Information
You can view the unit ID, software version, regulatory
information, and license agreement.
1 From the clock, select START.
2 Select Settings > System > About.
Device Care
NOTICE
Do not use a sharp object to clean the device.
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to
chlorine, salt water, sunscreen, cosmetics, alcohol, or other
harsh chemicals. Prolonged exposure to these substances can
damage the case.
Avoid pressing the keys under water.
Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Cleaning the Device
NOTICE
Even small amounts of sweat or moisture can cause corrosion
of the electrical contacts when connected to a charger.
Corrosion can prevent charging and data transfer.
1 Wipe the device using a cloth dampened with a mild
detergent solution.
2 Wipe it dry.
After cleaning, allow the device to dry completely.
Metal Watch Band Adjustment
If your watch includes a metal watch band, you should take your
watch to a jeweler or other professional to adjust the length of
the metal band.
Registering Your Device
Help us better support you by completing our online registration
today.
• Go to garmin.com/express.
• Keep the original sales receipt, or a photocopy, in a safe
place.
Caring for the Heart Rate Monitor
NOTICE
You must unsnap and remove the module before washing the
strap.
A build up of sweat and salt on the strap can decrease the ability
of the heart rate monitor to report accurate data.
Device Information
• Go to www.garmin.com/HRMcare for detailed washing
instructions.
• Rinse the strap after every use.
• Machine wash the strap after every seven uses.
• Do not put the strap in a dryer.
• When drying the strap, hang it up or lay it flat.
• To prolong the life of your heart rate monitor, unsnap the
module when not in use.
Specifications
Battery type
Rechargeable, built-in lithium-ion battery
Battery life
Up to 6 wk.
Water rating
10 ATM*
Operating temperature range From -20º to 55ºC (from -4º to 131ºF)
Charging temperature range
From 0º to 45ºC (from 32º to 113ºF)
Radio frequency/protocol
2.4 GHz ANT+ wireless technology
Bluetooth Smart device
3 Wait 30 seconds.
4 Insert the new battery with the positive side facing up.
NOTE: Do not damage or lose the O-ring gasket.
5 Replace the back cover and the four screws.
NOTE: Do not overtighten.
After you replace the heart rate monitor battery, you may need
to pair it with the device again.
Data Management
*The device withstands pressure equivalent to a depth of 100 m.
For more information, go to www.garmin.com/waterrating.
NOTE: The device is not compatible with Windows 95, 98, Me,
Windows NT , and Mac OS 10.3 and earlier.
Battery Information
Disconnecting the USB Cable
The actual battery life depends on the features enabled on your
device, such as activity tracking, smartphone notifications, GPS,
internal sensors, and connected ANT+ sensors.
Battery Life
Mode
Up to 20 hr.
Normal GPS mode
Up to 50 hr.
UltraTrac GPS mode with two-minute polling interval
Up to 6 wk.
Watch mode
HRM-Run Specifications
Battery type
User-replaceable CR2032, 3 volts
Battery life
1 year (1 hour per day)
Water rating
3 ATM*
NOTE: This product does not transmit heart
rate data while swimming.
Operating temperature From -20° to 60°C (from -4° to 140°F)
range
®
®
®
If your device is connected to your computer as a removable
drive or volume, you must safely disconnect your device from
your computer to avoid data loss. If your device is connected to
your Windows computer as a portable device, it is not necessary
to safely disconnect.
1 Complete an action:
• For Windows computers, select the Safely Remove
Hardware icon in the system tray, and select your device.
• For Mac computers, drag the volume icon to the trash.
2 Disconnect the cable from your computer.
Deleting Files
NOTICE
If you do not know the purpose of a file, do not delete it. Your
device memory contains important system files that should not
be deleted.
*The device withstands pressure equivalent to a depth of 30 m.
For more information, go to www.garmin.com/waterrating.
1
2
3
4
User Replaceable Batteries
Troubleshooting
WARNING
Do not use a sharp object to remove batteries.
Keep the battery away from children.
Never put batteries in mouth. If swallowed, contact your
physician or local poison control center.
Replaceable coin cell batteries may contain perchlorate
material. Special handling may apply. See www.dtsc.ca.gov
/hazardouswaste/perchlorate.
My daily step count does not appear
Radio frequency/
protocol
2.4 GHz ANT+ wireless communications
protocol
CAUTION
Contact your local waste disposal department to properly
recycle the batteries.
Replacing the Heart Rate Monitor Battery
1 Use a small Phillips screwdriver to remove the four screws on
the back of the module.
2 Remove the cover and battery.
Device Information
Open the Garmin drive or volume.
If necessary, open a folder or volume.
Select a file.
Press the Delete key on your keyboard.
The daily step count is reset every night at midnight.
If dashes appear instead of your step count, allow the device
to acquire satellite signals and set the time automatically.
The temperature reading is not accurate
Your body temperature affects the temperature reading for the
internal temperature sensor. To get the most accurate
temperature reading, you should remove the watch from your
wrist and wait 20 to 30 minutes.
You can also use an optional tempe external temperature
sensor to view accurate ambient temperature readings while
wearing the watch.
Resetting Your Device
If the device stops responding, you may need to reset it.
1 Hold LIGHT for at least 25 seconds.
2 Hold LIGHT for one second to turn on the device.
19
Restoring All Default Settings
NOTE: This deletes all user-entered information and activity
history.
You can restore all of the device settings to the factory default
values.
1 Hold UP.
2 Select Settings > System > Restore Defaults > Yes.
Maximizing the Battery Life
You can do several things to extend the life of the battery.
• Reduce the backlight brightness and timeout (Backlight
Settings, page 17).
• Use UltraTrac GPS mode for your activity (UltraTrac,
page 15).
• Turn off Bluetooth wireless technology when you are not
using connected features (Connected Features, page 13).
• When pausing your activity for a longer period of time, use
the resume later option (Stopping an Activity, page 2).
• Use a Connect IQ watch face that is not updated every
second.
For example, use a watch face without a second hand
(Customizing the Watch Face, page 16).
• Limit the smartphone notifications the device displays
(Managing Notifications, page 13).
Getting More Information
You can find more information about this product on the Garmin
website.
• Go to www.garmin.com/outdoor.
• Go to http://buy.garmin.com, or contact your Garmin dealer
for information about optional accessories and replacement
parts.
Appendix
Data Fields
%FTP: The current power output as a percentage of functional
threshold power.
%HRR: The percentage of heart rate reserve (maximum heart
rate minus resting heart rate).
10s Avg. Power: The 10-second moving average of power
output.
10s Avg Balance: The 10-second moving average of the left/
right power balance.
24-Hour Max.: The maximum temperature recorded in the last
24 hours.
24-Hour Min.: The minimum temperature recorded in the last
24 hours.
30s Avg. Power: The 30-second moving average of power
output.
30s Avg Balance: The 30-second moving average of the left/
right power balance.
3s Avg. Balance: The three-second moving average of the left/
right power balance.
3s Avg. Power: The 3-second moving average of power output.
Ambient Press.: The uncalibrated ambient pressure.
Average HR: The average heart rate for the current activity.
Average Pace: The average pace for the current activity.
Average Power: The average power output for the current
activity.
Average SWOLF: The average swolf score for the current
activity. Your swolf score is the sum of the time for one length
plus the number of strokes for that length (Swim
20
Terminology, page 3). In open water swimming, 25 meters is
used to calculate your swolf score.
Avg. %HRR: The average percentage of heart rate reserve
(maximum heart rate minus resting heart rate) for the current
activity.
Avg. Ascent: The average vertical distance of ascent since the
last reset.
Avg. Balance: The average left/right power balance for the
current activity.
Avg. Cadence: Cycling. The average cadence for the current
activity.
Avg. Cadence: Running. The average cadence for the current
activity.
Avg. Descent: The average vertical distance of descent since
the last reset.
Avg. Lap Time: The average lap time for the current activity.
Avg. Speed: The average speed for the current activity.
Avg. Strk/Len: The average number of strokes per length
during the current activity.
Avg. Strk Rate: The average number of strokes per minute
(spm) during the current activity.
Avg. Stroke Dist.: The average distance traveled per stroke
during the current activity.
Avg. Vert. Osc.: The average amount of vertical oscillation for
the current activity.
Avg GCT: The average amount of ground contact time for the
current activity.
Avg HR %Max.: The average percentage of maximum heart
rate for the current activity.
Balance: The current left/right power balance.
Baro. Pressure: The calibrated current pressure.
Bearing: The direction from your current location to a
destination. You must be navigating for this data to appear.
Cadence: Cycling. The number of revolutions of the crank arm.
Your device must be connected to a cadence accessory for
this data to appear.
Cadence: Running. The steps per minute (right and left).
Calories: The amount of total calories burned.
Compass Hdg.: The direction you are moving based on the
compass.
Course: The direction from your starting location to a
destination. Course can be viewed as a planned or set route.
You must be navigating for this data to appear.
Dest. Location: The position of your final destination.
Dest. Name: The last point on the route to the destination. You
must be navigating for this data to appear.
Dist. Remaining: The remaining distance to the final
destination. You must be navigating for this data to appear.
Distance: The distance traveled for the current track or activity.
Elapsed Time: The total time recorded. For example, if you start
the timer and run for 10 minutes, then stop the timer for 5
minutes, then start the timer and run for 20 minutes, your
elapsed time is 35 minutes.
Elevation: The altitude of your current location above or below
sea level.
ETA: The estimated time of day when you will reach the final
destination (adjusted to the local time of the destination). You
must be navigating for this data to appear.
ETE: The estimated time remaining until you reach the final
destination. You must be navigating for this data to appear.
Appendix
GCT: The amount of time in each step that you spend on the
ground while running, measured in milliseconds. Ground
contact time is not calculated while walking.
Glide Ratio: The ratio of horizontal distance traveled to the
change in vertical distance.
Glide Ratio Dest.: The glide ratio required to descend from your
current position to the destination elevation. You must be
navigating for this data to appear.
GPS Elevation: The altitude of your current location using GPS.
GPS Heading: The direction you are moving based on GPS.
Grade: The calculation of rise (elevation) over run (distance).
For example, if for every 3 m (10 ft.) you climb you travel
60 m (200 ft.), the grade is 5%.
Heading: The direction you are moving.
Heart Rate: Your heart rate in beats per minute (bpm). Your
device must be connected to a compatible heart rate monitor.
HR %Max.: The percentage of maximum heart rate.
HR Zone: The current range of your heart rate (1 to 5). The
default zones are based on your user profile and maximum
heart rate (220 minus your age).
Int. Distance: The distance traveled for the current interval.
Int. Pace: The average pace for the current interval.
Int. SWOLF: The average swolf score for the current interval.
Intensity Factor: The Intensity Factor™ for the current activity.
Interval Lengths: The number of pool lengths completed during
the current interval.
Interval Time: The stopwatch time for the current interval.
Int Strk/Len: The average number of strokes per length during
the current interval.
Int Strk Dist: The average distance traveled per stroke during
the current interval.
Int Strk Rate: The average number of strokes per minute (spm)
during the current interval.
Int Strk Type: The current stroke type for the interval.
Int Strokes: The total number of strokes for the current interval.
L. Int. Stk. Dist.: The average distance traveled per stroke
during the last completed interval.
L. Int. Stk. Rate: The average number of strokes per minute
(spm) during the last completed interval.
L. Int. Stk. Type: The stroke type used during the last
completed interval.
L. Int. Strokes: The total number of strokes for the last
completed interval.
L. Int. SWOLF: The average swolf score for the last completed
interval.
L. Len. Stk. Rate: The average number strokes per minute
(spm) during the last completed pool length.
L. Len. Stk. Type: The stroke type used during the last
completed pool length.
L. Len. Strokes: The total number of strokes for the last
completed pool length.
Lap %HRR: The average percentage of heart rate reserve
(maximum heart rate minus resting heart rate) for the current
lap.
Lap Ascent: The vertical distance of ascent for the current lap.
Lap Balance: The average left/right power balance for the
current lap.
Lap Cadence: Cycling. The average cadence for the current
lap.
Lap Cadence: Running. The average cadence for the current
lap.
Appendix
Lap Descent: The vertical distance of descent for the current
lap.
Lap Distance: The distance traveled for the current lap.
Lap GCT: The average amount of ground contact time for the
current lap.
Lap HR: The average heart rate for the current lap.
Lap HR %Max.: The average percentage of maximum heart
rate for the current lap.
Lap NP: The average Normalized Power for the current lap.
Lap Pace: The average pace for the current lap.
Lap Power: The average power output for the current lap.
Laps: The number of laps completed for the current activity.
Lap Speed: The average speed for the current lap.
Lap Time: The stopwatch time for the current lap.
Lap Vert. Osc.: The average amount of vertical oscillation for
the current lap.
Last Int. Dist.: The distance traveled for the last completed
interval.
Last Int. Pace: The average pace for the last completed
interval.
Last Int. Time: The stopwatch time for the last completed
interval.
Last Lap Ascent: The vertical distance of ascent for the last
completed lap.
Last Lap Cad.: Cycling. The average cadence for the last
completed lap.
Last Lap Cad.: Running. The average cadence for the last
completed lap.
Last Lap Descent: The vertical distance of descent for the last
completed lap.
Last Lap Dist.: The distance traveled for the last completed lap.
Last Lap HR: The average heart rate for the last completed lap.
Last Lap NP: The average Normalized Power for the last
completed lap.
Last Lap Pace: The average pace for the last completed lap.
Last Lap Power: The average power output for the last
completed lap.
Last Lap Speed: The average speed for the last completed lap.
Last Lap Time: The stopwatch time for the last completed lap.
Last Len. Pace: The average pace for your last completed pool
length.
Last Len. SWOLF: The swolf score for the last completed pool
length.
Lat/Lon: The current position in latitude and longitude
regardless of the selected position format setting.
Lengths: The number of pool lengths completed during the
current activity.
Location: The current position using the selected position
format setting.
Max. Ascent: The maximum rate of ascent in feet per minute or
meters per minute since the last reset.
Max. Descent: The maximum rate of descent in meters per
minute or feet per minute since the last reset.
Max. Elevation: The highest elevation reached since the last
reset.
Max. Lap Power: The top power output for the current lap.
Maximum Speed: The top speed for the current activity.
Max Power: The top power output for the current activity.
Min. Elevation: The lowest elevation reached since the last
reset.
21
Nautical Dist: The distance traveled in nautical meters or
nautical feet.
Nautical Speed: The current speed in knots.
NP: The Normalized Power™ for the current activity.
Off Course: The distance to the left or right by which you have
strayed from the original path of travel. You must be
navigating for this data to appear.
Pace: The current pace.
Pedal Smooth.: The measurement of how evenly a rider is
applying force to the pedals throughout each pedal stroke.
Power: The current power output in watts.
Power to Weight: The current power measured in watts per
kilogram.
Power Zone: The current range of power output (1 to 7) based
on your FTP or custom settings.
Repeat On: The timer for the last interval plus the current rest
(pool swimming).
Rest Timer: The timer for the current rest (pool swimming).
Speed: The current rate of travel.
Steps: The number of steps recorded by the foot pod.
Stroke Rate: The number of strokes per minute (spm).
Strokes: The total number of strokes for the current activity.
Sunrise: The time of sunrise based on your GPS position.
Sunset: The time of sunset based on your GPS position.
Temperature: The temperature of the air. Your body
temperature affects the temperature sensor.
Time in Zone: The time elapsed in each heart rate or power
zone.
Time of Day: The time of day based on your current location
and time settings (format, time zone, daylight saving time).
Timer: The current time of the countdown timer.
Torque Effectiveness: The measurement of how efficiently a
rider is pedaling.
Total Ascent: The total elevation distance ascended since the
last reset.
Total Descent: The total elevation distance descended since
the last reset.
Training Effect: The current impact (1.0 to 5.0) on your aerobic
fitness.
TSS: The Training Stress Score™ for the current activity.
V Dist to Dest: The elevation distance between your current
position and the final destination. You must be navigating for
this data to appear.
Vertical Osc.: The amount of bounce while you are running.
The vertical motion of your torso, measured in centimeters for
each step.
Vertical Speed: The rate of ascent or descent over time.
Vert Spd to Tgt: The rate of ascent or descent to a
predetermined altitude. You must be navigating for this data
to appear.
VMG: The speed at which you are closing on a destination along
a route. You must be navigating for this data to appear.
Work: The accumulated work performed (power output) in
kilojoules.
“Software”) in binary executable form in the normal operation of
the product. Title, ownership rights, and intellectual property
rights in and to the Software remain in Garmin and/or its thirdparty providers.
You acknowledge that the Software is the property of Garmin
and/or its third-party providers and is protected under the United
States of America copyright laws and international copyright
treaties. You further acknowledge that the structure,
organization, and code of the Software, for which source code is
not provided, are valuable trade secrets of Garmin and/or its
third-party providers and that the Software in source code form
remains a valuable trade secret of Garmin and/or its third-party
providers. You agree not to decompile, disassemble, modify,
reverse assemble, reverse engineer, or reduce to human
readable form the Software or any part thereof or create any
derivative works based on the Software. You agree not to export
or re-export the Software to any country in violation of the export
control laws of the United States of America or the export control
laws of any other applicable country.
Symbol Definitions
These symbols may appear on the device or accessory labels.
Alternating current. The device is suitable for alternating current.
Direct current. The device is suitable for direct current only.
Fuse. Indicates a fuse specification or location.
WEEE disposal and recycling symbol. The WEEE symbol is
attached to the product in compliance with the EU directive
2002/96/EC on Waste Electrical and Electronic Equipment
(WEEE). It is intended to deter the improper disposal of this
product and to promote reuse and recycling.
Software License Agreement
BY USING THE DEVICE, YOU AGREE TO BE BOUND BY THE
TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE
LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT
CAREFULLY.
Garmin Ltd. and its subsidiaries (“Garmin”) grant you a limited
license to use the software embedded in this device (the
22
Appendix
Index
A
accessories 20
activities 2, 14
saving 2
starting 2
activity tracking 5
airport 1
nearest 2
alarms 10, 14
alerts 10, 14, 15
altimeter 11, 16
calibrating 1, 16
altitude 1, 9
ANT+ sensors 17
applications 12, 13
smartphone 1
Auto Lap 15
Auto Pause 15
auto scroll 15
B
backlight 1, 17
bands 18
barometer 11, 16
battery 18
charging 1
life 19
maximizing 13, 15, 20
replacing 19
bike sensors 18
Bluetooth technology 13
C
cadence 3, 7
alerts 15
sensors 18
calendar 5, 10
calibrating
altimeter 1, 16
compass 16
calorie, alerts 15
charging 1
cleaning the device 18
clock 10
compass 9, 11, 16
calibrating 16
Connect IQ 12
coordinates 11
countdown timer 10
customizing the device 14
cycling 3
D
data
pages 14, 16
storing 13
transferring 13
uploading 13
data fields 3, 12
database, updating 1
deleting
all user data 19
history 12
personal records 7
device, registration 18
direct-to routing 2
distance 15
alerts 15
drills 3, 4
E
elevation, settings 16
F
fitness 9
foot pod 17, 18
Index
G
S
Garmin Connect 1, 5, 12–14
storing data 13
Garmin Express 13, 14
Garmin product support, contact information 18
GLONASS 16
goals 6
GPS 15, 16
ground contact time 7
saving activities 3
screen 17
settings 14, 16, 17, 20
Sight 'N Go 11
skiing
alpine 2, 3
snowboarding 2, 3
sleep mode 5
smartphone 12
applications 13
pairing 1
snowboarding 2, 3
software
license 18
version 18
software license agreement 22
specifications 19
speed 15
stopwatch 10
strokes 3
sunrise and sunset times 10
swimming 3, 4
swolf score 3
system settings 16
H
heart rate
alerts 15
monitor 7–9, 17–19
zones 4, 11
history 3, 11, 12
deleting 12
sending to computer 13
I
intervals 3
workouts 6
K
keys 1, 16
L
language 16
lengths 3
lifetime athlete 5
locations 11
saving 11
M
main menu, customizing 16
maps 11, 14, 16
browsing 11
navigating 11
menu 1
metronome 3
N
navigation 2, 14, 16
horizontal situation indicator (HSI) 2
Sight 'N Go 11
stopping 2
nearest airport 2
north reference 16
notifications 10, 13
O
odometer 12
P
pairing
ANT+ sensors 17
smartphone 1
personal records 6, 7
deleting 7
pool size 3, 4
power (force)
alerts 15
meters 8
zones 5
product registration 18
product support, contact information 18
profiles 2
user 4
projected finish time 8
R
racing 6
recovery 8, 9
registering the device 18
replacing the battery 19
resetting the device 19, 20
routes 11
direct-to 2
running dynamics 7
T
target 6
tempe 18, 19
temperature 9, 18, 19
time 9
alerts 15
settings 17
zones and formats 17
timer 3, 11
countdown 10
tones 3, 10
TracBack 2, 11
tracks 11
training 6, 13
pages 3
plans 5
Training Effect 9
troubleshooting 7, 18–20
U
UltraTrac 15
unit ID 18
units of measure 17
updating, database 1
uploading data 13
USB, disconnecting 19
user data, deleting 19
user profile 4
V
vertical oscillation 7
VIRB remote 12
Virtual Partner 6
VO2 max. 8
W
watch faces 9, 10, 12, 16
watch mode 15
water resistance 18
weather 10
Wi‑Fi, connecting 13, 14
widgets 9, 12
workouts 5
loading 5
Z
zones
heart rate 4
power 5
23
www.garmin.com/support
+43 (0) 820 220230
+ 32 2 672 52 54
0800 770 4960
1-866-429-9296
+385 1 5508 272
+385 1 5508 271
+420 221 985466
+420 221 985465
+ 45 4810 5050
+ 358 9 6937 9758
+ 331 55 69 33 99
+ 39 02 36 699699
(+52) 001-855-792-7671
0800 0233937
+47 815 69 555
00800 4412 454
+44 2380 662 915
(+35) 1214 447 460
+386 4 27 92 500
0861 GARMIN (427 646)
+27 (0)11 251 9999
+34 93 275 44 97
+ 46 7744 52020
+886 2 2642-9199 ext 2
0808 238 0000
+44 (0) 870 8501242
+49 (0) 89 858364880
zum Ortstarif - Mobilfunk
kann abweichen
913-397-8200
1-800-800-1020
© 2015 Garmin Ltd. or its subsidiaries
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising