DV-603 DVF-3060 DVF-3060K

DVD/VCD/CD PLAYER

DV-603

DVF-3060

DVF-3060K

INSTRUCTION MANUAL

This instruction manual is for some models. Model availability and features

(functions) may differ depending on the country and sales area.

B60-5233-08 00 (K/P/E/T/M/X/Y)

AP

01/10

2

Introduction

Before applying power

Units are designed for operation as follows.

U.S.A. and Canada ......................................................... AC 120V only

DV-603/DVF-3060/DVF-3060K (EN/K,P,E,T,M,X,Y)

Caution : Read this page carefully to ensure safe operation.

Other countries ........................................................... AC 110

-

240 V

For the United Kingdom

Factory fitted moulded mains plug

1. The mains plug contains a fuse. For replacement, use only a 13-Amp ASTA-approved (BS1362) fuse.

2. The fuse cover must be refitted when replacing the fuse in the moulded plug.

3. Do not cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adapter, or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

IMPORTANT :

The wires in the mains lead are coloured in accordance with the following code:

Blue : Neutral

Brown : Live

Do not connect those leads to the earth terminal of a threepin plug.

Safety precautions


WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

R I S K O F E L E C T R I C S H O C K

D O N O T O P E N

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED SERVICE PERSONNEL.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,

IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS

VOLTAGE" WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE

TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE

USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) IN-

STRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

The marking of products using lasers

(For countries other than U.S.A., U.S.-Military and Canada)

CLASS 1

LASER PRODUCT

The marking this product has been classified as Class 1. It means that there is no danger of hazardous radiation outside the product.

Location: Back panel

Introduction


Unpacking

Unpack the unit carefully and make sure that all the accessories are present.

If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit was shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and packing materials in case you need to move or ship the unit in the future.

Keep this manual handy for future reference.

Accessories

3

Please confirm that the following accessories are present.

Audio video cord (Red, White, Yellow) ...(1) Remote control unit ...(1) Batteries ...(2)

DV-603/DVF-3060 DV-603/DVF-3060 (R6/AA)

DVF-3060K DVF-3060K (R03/AAA)

Coaxial cable ...(1)

*AC plug adaptor ...(1)

* Use to adapt the plug on the power cord to the shape of the wall outlet.

(Accessory only for regions where use is necessary.)

For the U.S.A.

CAUTION:

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

In compliance with Federal Regulations, the following are reproductions of labels on, or inside the product relating to laser product safety.

KENWOOD CORPORATION

2967-3, ISHIKAWA-CHO,

HACHIOJI-SHI,

TOKYO, JAPAN

KENWOOD CORP. CERTIFIES THIS EQUIPMENT

CONFORMS TO DHHS REGULATIONS NO. 21 CFR

1040.10, CHAPTER 1, SUBCHAPTER J.

Location: Back Panel

CAUTIONLASER RADIATION WHEN OPEN.

DO NOT STARE INTO BEAM.

Location: Laser Pick-up Unit Cover inside this product

For the U.S.A.

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– – Reorient or relocate the receiving antenna.

– – Increase the separation between the equipment and receiver.

– – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– – Consult the dealer or an experienced radio / TV technician for help.

4

IMPORTANT SAFEGUARDS

Please read all of the safety and operating instructions before operating this appliance. Adhere to all warnings on the appliance and in the instruction manual. Follow all the safety and operating instructions. These safety and operating instructions should be retained for future reference.

1. Power sources – The appliance should be connected to a power supply only of the type described in the instruction manual or as marked on the appliance. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For appliances intended to operate from battery power, or other sources, refer to the instruction manual.

2. Power-cord protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

Never pull or stretch the cord.



6. Temperature – The appliance may not function properly if used at extremely low, or freezing temperatures. The ideal ambient temperature is above +5°C (41°F).

7. Heat – The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. Do not place a flaming object, such as a candle or lantern, on or near the appliance.

8. Electric shock – Care should be taken so that objects do not fall and liquid is not spilled into the enclosure through openings. If a metal objects, such as a hair pin or a needle, comes into contact with the inside of this appliance, a dangerous electric shock may result. For families with children, never permit children to put anything, especially metal, inside this appliance.

9. Enclosure removal – Never remove the enclosure. If the internal parts are touched accidentally, a serious electric shock might occur.

3.

CAUTION

– Polarization – This appliance may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the polarized plug.

4. Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the appliance and to protect it from overheating, and these openings must not be blocked or covered. The appliance should be situated so that its location or position does not interfere with its proper ventilation.

To maintain good ventilation, do not put records or a tablecloth on the appliance. Place the appliance at least 10 cm away from the walls.

Do not use the appliance on a bed, sofa, rug or similar surface that may block the ventilation openings. This appliance should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10.Magnetic fields – Keep the appliance away from sources of magnetic fields such as TV sets, speaker systems, radios, motorized toys or magnetized objects.

11.Cleaning – Unplug this appliance from the wall outlet before cleaning. Do not use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. to clean the cabinet. Use a clean dry cloth.

12.Accessories – Do not place this appliance on an unstable cart, stand, tripod, bracket, or table. The appliance may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the appliance. Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

5. Water and moisture – The appliance shall not be exposed to dripping and splashing - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. Do not place an object containing liquid, such as a flower vase, on the appliance.

13.Lightning

– For added protection for this appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the appliance due to lightning and power-line surges.

14.Abnormal smell – If an abnormal smell or smoke is detected, immediately turn the power OFF and unplug the appliance from the wall outlet. Contact your dealer or nearest service center.

POWER OFF!

IMPORTANT SAFEGUARDS


5

18.Power lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

19. AC outlets – Do not connect other audio equipment with a power consumption larger than that specified to the AC outlet on the rear panel. Never connect other electrical appliances, such as an iron or toaster, to it to prevent fire or electric shock.

15.Damage requiring service – The appliance should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally by following the instruction manual. Adjust only those controls that are covered by the instruction manual as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to its normal operation.

E. The appliance has been dropped, or the enclosure damaged.

F. The appliance exhibits a marked change in performance.

16.Servicing – The user should not attempt to service the appliance beyond that described in the instruction manual.

All other servicing should be referred to qualified service personnel.

17.Outdoor antenna grounding– If an outside antenna is connected to the appliance, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. Article 810 of the

National Electrical Code ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

See Figure.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL

ELECTRICAL CODE

ANTENNA

LEAD IN WIRE

GROUND

CLAMPS

ELECTRIC

SERVICE

EQUIPMENT

NEC – NATIONAL ELECTRICAL CODE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMP

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

20. Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

21. Attachment – Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.

22. Replacement parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards.

23. Safety check – Upon completion of any service or repairs to this appliance, ask the service technician to perform safety checks to determine that the appliance is in proper operating condition.

Notes:

1. Item 3 is not required except for grounded or polarized equipment.

2. Item 17 and 18 are not required except for units provided with antenna terminals.

3. Item 17 complies with UL in the U.S.A.

6

Special features and Contents


Special features

This document classifies the applications of each feature using the following marks.

: Description of a feature that can be used with DVD.

: Description of a feature that can be used with CD.

: Description of a feature that can be used with VCD.

Higher video quality than S-VHS video and LaserDisc

Higher audio quality than music CD

Graphical user interface (GUI) compatibility

Versatile DVD playback features

DTS digital output compatibility

Contents

Caution : Read the pages marked carefully to ensure safe operation.

Preparations

Introduction ......................................................................................... 2

Before applying power .................................................................. 2

Safety precautions .......................................................................... 2

IMPORTANT SAFEGUARDS ...................................................... 4

Special features and Contents ........................................................ 6

Special features ...................................................................................... 6

Contents ..................................................................................................... 6

Discs information .............................................................................. 7

Types of playable discs ......................................................................... 7

Unplayable discs ..................................................................................... 7

Icons on the DVD VIDEO discs ............................................................. 7

Region Codes ...................................................................................... 8

Region codes in the world .................................................................... 8

Video formats ...................................................................................... 9

Important items ................................................................................ 10

Maintenance .......................................................................................... 10

Reference ................................................................................................ 10

System Connections ........................................................................ 11

Connecting to a TV with video (composite) input terminal ......... 11

Connecting to a TV with S-video input terminal ............................ 11

Connecting to a TV with SCART input terminal

(For Europe and U.K.) ........................................................................ 11

Connecting to a TV with Component input terminals

(For other countries) ......................................................................... 12

Connecting to an Audio component .................................................. 12

Controls and indicators .................................................................. 13

Operation of remote control unit .................................................. 14

Operations

Playback of disc .............................................................................. 16

Basic play ............................................................................................... 16

Disc playback features ........................................................................ 17

Using the On-screen banner display ........................................... 19

Selecting a Title .................................................................................... 20

Selecting a Chapter or Track .............................................................. 20

Select Audio Language ........................................................................ 21

Select Subtitle Language .................................................................... 21

Select Camera angle ............................................................................ 22

Using IntroScan function ..................................................................... 22

Using Bookmarks .................................................................................. 23

Repeat play ............................................................................................. 24

A-B Repeat play ..................................................................................... 24

Random play ........................................................................................... 25

Program play ..................................................................................... 26

Set Up functions ............................................................................... 28

Set up menu ............................................................................................ 28

Select Audio Language ........................................................................ 29

Select Subtitle Language .................................................................... 29

Select Menu Language ........................................................................ 30

Select Rating .......................................................................................... 30

Password ................................................................................................ 31

TV aspect ................................................................................................. 33

Dynamic Range ...................................................................................... 34

Digital Audio Out ................................................................................... 34

Linear PCM ............................................................................................. 35

Menu playback ................................................................................. 36

Hierarchical structure of VCD menus ............................................... 36

Playback without using the menu playback function

(In case of a P.B.C.-compatible VCD) (To P.B.C. On or Off) ..... 37

Selecting the Audio channel .............................................................. 37

Enjoying karaoke singing .............................................................. 38

Selecting the Audio channel .............................................................. 38

Controlling the key of the music (KEY CONTROL) .......................... 38

Adjust the ECHO level .......................................................................... 39

HIT MASTER function .......................................................................... 39

MP3 function ..................................................................................... 40

Guidance of MP3 ................................................................................... 40

Playing back MP3 ................................................................................. 41

Selecting MP3 files .............................................................................. 42

MP3 Repeat play .................................................................................... 43

MP3 Random play .................................................................................. 43

MP3 program playback ........................................................................ 44

DVD menu language code list ....................................................... 45

Knowledge

In case of difficulty .......................................................................... 46

Specifications .................................................................................. 48

Discs information


Types of playable discs

The system using this unit does not only play music from CD but can also play the discs listed below to offer you high-quality entertainment of video of movies and live concerts.

7

Playable Disc

DVD VIDEO CD (CD-R, CD-RW) VCD

Logo mark on disc

Disc size

8cm 8cm

12cm 12cm

12cm

One side only

Played sides

One or both One or both

Video + Audio

Approx. 41 min.

(1 side, 1 layer)

Approx. 75 min.

(1 side, 2 layers)

Approx. 82 min.

(2 sides, 1 layer)

Approx. 150 min.

(2 sides, 2 layers)

Approx. 133 min.

(1 side, 1 layer)

Approx. 242 min.

(1 side, 2 layers)

Approx. 266 min.

(2 sides, 1 layer)

Approx. 484 min.

(2 sides, 2 layers)

One side only One side only

Max. 74 min.

Audio

Max. 20 min., digital Max. 74 min., digital

MP3 media that can be played back with this equipment (CD-R, CD-RW)

‚

Unplayable discs

This player cannot play back any of the following discs.

DVD AUDIO discs

DVD-ROM discs

DVD-R/DVD-RAM/DVD-RW discs

CD-ROM discs (Except MP3 disc [ ISO 9660 level 1])

VSD discs

S-VCD discs

CDV discs (Only the audio part can be reproduced.)

CD-G/CD-EG/CD-EXTRA discs (Only the audio can be reproduced.)

Photo CD discs (Never attempt to play them.)

÷ A DVD VIDEO disc with a region code which does not match this unit or without a region code. For details, see "Region

Codes".

Formats".

8

÷ When the video format of a disc differs from that of the TV in use, the disc cannot be played normally. For details, see "Video

9

÷ This unit may also be incapable of playing certain CD-R/RW discs depending on their properties, recording conditions, etc.

Icons on the DVD VIDEO discs

Icon Description

Indicates the region code where the disc can be played.

Number of voice languages recorded with the audio function. The number in the icon indicates the number of voice languages. (Max. 8 languages)

Number of subtitle languages recorded with the subtitle function. The number in the icon indicates the number of subtitle languages. (Max. 32 languages)

Number of angles provided by the angle function. The number in the icon indicates the number of angles. (Max.

9 angles)

Aspect ratios that can be selected. "LB" stands for Letter Box and "PS" for Pan/Scan.

•‹

In the example on the left, the 16:9 video can be converted into letter box video.

8

Region Codes


Every player of this model has a certain region code assigned to it based on the country where the player is used.

When the player is used to play back DVD VIDEO discs, it can only play the DVD VIDEO discs carrying the region codes matching the region code of the player.

The region code for this player is described on the rear panel of the player.

Region codes in the world

The DVD players are given a region code according to the country or area it is marketed, as shown in the following map.

Professional use disc

(Air Line cabin service)

Region codes of the DVD VIDEO discs that can be played with this player

This player can play back a DVD VIDEO disc which carries the corresponding code to the region code of the player shown in the table above, a marking containing the region code of the player or the "ALL" marking shown below.

Even when a DVD VIDEO disc does not carry any indication of the region code, it may sometimes unable to be played on this player due to certain restrictions.

Restrictions due to difference between discs

Some DVD and VCD discs can be played only in certain playback modes according to the intentions of the software producers. As this player plays discs according to their intentions, some functions may not work as intended by you. Please be sure to read the instructions provided with each disc. When an inhibition icon is displayed on the TV screen connected to the player, it indicates that the disc being played is under the restriction as described above.

Inhibition icon

Video formats

The TV picture display and disc signal systems can be divided roughly into two TV formats (NTSC and PAL).

They are variable depending on countries and areas.


TV formats of major countries

TV Format Major Countries & Areas

NTSC

PAL

Japan, Taiwan, Korea, USA, Canada,

Mexico, Philippines, Chile, etc.

China, U.K., Germany, Australia, New

Zealand, Kuwait, Singapore, etc.

9

(For U.S.A. , Canada and U.S. Military )

This unit reproduces NTSC discs in NTSC format. (This unit can not play PAL discs.)

(For other countries)

This unit reproduces NTSC discs in NTSC format and PAL discs in PAL format.

÷ If the video formats of the disc and TV do not match, the disc cannot be reproduced correctly. It is therefore required to select the disc according to the TV set in use (country and area).

Checking the Video Format

Check the video format of the VCD and DVD discs to be played on the player as described below.

1

Check if the video formats of the TV to be used and disc to be played match each other.

÷ For details, refer to the instructions provided with the

TV and disc.

2

When the TV is switchable between NTSC and PAL, set the TV format according to the disc format.

TV Format

NTSC only

PAL only

NTSC/PAL switchable

Playable Disc Format

NTSC

PAL

NTSC/PAL

When the video formats are different :

Try playing the disc. If the video formats of the disc and TV do not match, the played video may be black and white or become as shown below.

Top and bottom edges are not displayed.

Top and bottom areas are dark.

÷ Correct video cannot be reproduced if the video formats of the

TV and disc do not match.

Picture turbulence due to sync unmatching.

10

Important items


Maintenance

Maintenance of the unit In regard to contact cleaner

When the front panel or case becomes dirty, wipe with a soft, dry cloth. Do not use thinner, benzine, alcohol, etc. for these agents may cause discoloration.

Do not use contact cleaners because it could cause a malfunction.

Be specially careful not to use contact cleaners containing oil, for they may deform the plastic component.

Reference

Disc handling precautions

Sticker

Handling

Hold the disc so that you do not touch the playing surface.

Label side

Playing side

Never play a cracked or warped disc

During playback, the disc rotates at high speed in the player. Therefore, to avoid danger, never use a cracked or deformed disc or a disc repaired with tape or adhesive agent. Please do not use discs which are not round because they may cause malfunction.

Do not attach paper or tape to either the playing side or the label side of the disc.

Disc accessories

The disc accessories (stabilizer, protection sheet, protection ring, etc.) which are marketed for improving the sound quality or protecting discs as well as the disc cleaner should not be used with this system because they may cause malfunction.

Sticky paste

Cleaning

If there are fingerprint marks or foreign matter found on the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards in a radial manner.

Storage

When a disc is not to be played for a long period of time, remove it from the player and store it in its case.

Note related to transportation and movement

Before transporting or moving this unit, carry out the following operations.

1. Set the POWER ON/OFF switch to the ON without loading a disc.

2. Wait a few seconds and verify that the display shown appears.

3. Set the POWER ON/OFF switch to OFF.

Caution on condensation

Condensation (of dew) may occur inside the unit when there is a great difference in temperature between this unit and the outside. This unit may not function properly if condensation occurs. In this case, leave the unit for a few hours and restart the operation after the condensation has dried up.

Be specially cautious against condensation in the following circumstances:

When this unit is carried from one place to another across a large difference in temperature, when the humidity in the room where this unit is installed increases, etc.

System Connections

Make connections as shown below.

When connecting the related system components, refer also to the instruction manuals of the related components.

Caution:

Do not plug in the power lead until all connections are completed.


11

Malfunction of microcomputer

If operation is not possible or erroneous display appears even though all connections have been made properly, reset the microcomputer referring to "In case of difficulty".

y

Caution

Be sure to adhere to the following, or proper ventilation will be blocked causing damage or fire hazard.

÷ Do not place any objects impairing heat radiation onto the top of the unit.

÷ Leave some space around the unit (from the largest outside dimension including projection) equal to or greater than, shown below.

Top panel : 50 cm Side pannel : 10 cm Back panel : 10 cm

Connecting to a TV with video (composite) input terminal

(For Europe and U.K.)

TV TV


Audio video cord

Connecting to a TV with S-video input terminal


TV TV

Audio video cord


Audio cord Audio cord

S-video cord S-video cord

Connecting to a TV with SCART input terminal


TV

SCART cable

12

System Connections


Connecting to a TV with Component input terminals


TV

[ For U.S.A. and Canada ]

Select the scanning method of the Component

Video output using the COMPONENT VIDEO

OUTPUT switch on the rear panel.

Audio cord

Component cords

INTERLACE: Scanning method is fixed at interlaced scanning.

PROGRESSIVE: When progressive scanning is unavailable with certain discs, the scanning method is switched automatically to interlaced scanning. When the scanning method is changed, the scanning status will be displayed for a few seconds.

Connecting to an Audio component

TV

AV receiver or

Amplifier


Coaxial or Optical cable

Audio cord

Video cord or S-video cord

TV

AV receiver or

Amplifier


Coaxial or Optical cable

Audio cord

Video cord, S-video cord or Component cords

1. In case an associated system component is connected, also read the instruction manual of the component.

2. Insert the optical-fiber cable straight into the connector until it clicks.

3. Never bend or bundle the optical-fiber cable.

Controls and indicators

PLAY/PAUSE indicator

PARENTAL LOCK indicator

TITLE indicator

CHAPTER indicator

TRACK indicator

HOUR indicator

MINUTE indicator

SECOND indicator


13

RESUME indicator

INTRO SCAN indicator

PROGRAM indicator

P.B.C. indicator

SEARCH indicator

RANDOM indicator

REPEAT indicators

REPEAT

REPEAT 1

REPEAT ALL

REPEAT A-B

Display

Character information display section

DVD indicator

VCD indicator

CD indicator

MP3 indicator

0

POWER

ON OFF

MIC LEVEL

MIN MAX

7

1

4

6

¡

¢

(Only for DVF-3060K)

1

POWER ON / OFF switch

2

Disc tray

^

^

3

0 (Open/Close) key

^

4

4(PREV.), ¢(NEXT) (Skip) keys

&

5

1, ¡ (Search) keys &

6

6 (Play/Pause) key

7

7 (Stop) key

^

^

8

MIC jack (Only for DVF-3060K)

°

MIC LEVEL control knob

(Only for DVF-3060K)

°

DIMMER function

The display brightness of the main unit can be changed.

DVF-3060K DV-603/DVF-3060

DIMMER

Switching as shown below is done each time the DIMMER key on the remote control is pressed.

1 Dim

2 Not lit

3 Bright

14

Operation of remote control unit

DV-603/ DVF-3060

1

2

3

4

5

6

7

8

9

1

4

7

MENU

2 3

ON SCREEN

5 6

TOP MENU

8 9

AUDIO

0 CLEAR

SUBTITLE ON/OFF

ANGLE

MULTI CONTROL

P.MODE

RANDOM

SLOW

RETURN

STEP

ENTER

1 ¡

REPEAT

DIMMER

A-B

4

7

¢

6

0

!

@

#

$

%

^


The keys on the remote control unit with the same names as on the main unit have the same function as the keys on the main unit.

1

Numeric keys

2

CLEAR key

3

SUBTITLE key

)

(

¡

(SUBTITLE) ON/OFF key

¡

4

Cursor Up (

5), Down (∞),

Left (

2) and Right (3) keys

(,•

5

P.MODE key

§

RANDOM key

6

SLOW (Back slow/

∞

Forward slow) keys

&

STEP (Back step/

Forward step) keys

&

7

1 key/¡ key (Search

key)

&

4 (PREV.) key/¢

(NEXT) key (Skip key)

&

8

REPEAT key

¢

A-B Repeat key

¢

9

DIMMER key

0

MENU key

!

ON SCREEN key

#

•

(

@

TOP MENU key

^,‡

#

AUDIO key

$

ANGLE key

%

RETURN key

¡,‡

™

•

ENTER key

^

7 (Stop) key

(

^

6 (Play/Pause) key ^

Model : RC-D0307 (Infrared ray system)

Loading batteries

1 Remove the cover.

2 Insert batteries.

3 Close the cover.

÷ Insert two R6/LR6 (“AA”-size) batteries following the polarity indications.

Operation

Insert the power plug into a power outlet, press the

POWER ON / OFF switch of the main unit to ON, then press the desired remote control key.

Remote sensor

6m

÷ When pressing more than one remote control keys successively, press the keys securely by leaving an interval of 1 second or more between pressing of keys.

Operating range

(approx.)

1. The provided batteries are intended for use in operation checking, and their service life may be short.

2. When the remote controllable distance becomes short, replace both of the batteries with new ones.

3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.

Operation of remote control unit


15

6

7

3

4

5

DVF-3060K

1 8

9

0

!

@

#

$

1

4

ECHO

2

5

7 8

0

SHIFT

HIT MASTER

3

6

9

%

The keys on the remote control unit with the same names as on the main unit have the same function as the keys on the main unit.

1

DIMMER key

2

SLOW (Back slow/

#

Forward slow) keys

&

STEP (Back step/

Forward step) keys

&

3

4 (PREV.) key/

¢ (NEXT) key (Skip key)

&

1 key/¡ key (Search

key)

4

7 (Stop) key

&

^

6 (Play/Pause) key ^

5

REPEAT key

¢

A-B Repeat key

¢

6

Cursor Up (

5), Down (∞),

Left (

2) and Right (3) keys

(,•

ENTER key

7

RANDOM key

P.MODE key

(

∞

§

8

MENU key

•

9

TOP MENU key

^,‡

0

AUDIO key

!

ANGLE key

@

ON SCREEN key

#

SUBTITLE key

¡,°

™

(

¡

(SUBTITLE) ON/OFF key

$

RETURN key

CLEAR key

%

Numeric keys

¡

•

(

)

KARAOKE keys

ECHO keys

SHIFT key

·

Key Control keys

°

HIT MASTER key

·

°

Model : RC-D0311 (Infrared raysystem)

Loading batteries

1 Remove the cover.

2 Insert batteries.

3 Close the cover.

÷ Insert two R03 ("AAA"-size) batteries following the polarity indications.

Operation

Insert the power plug into a power outlet, press the

POWER ON / OFF switch of the main unit to ON, then press the desired remote control key.

Remote sensor

6m

÷ When pressing more than one remote control keys successively, press the keys securely by leaving an interval of 1 second or more between pressing of keys.

Operating range

(approx.)

1. The provided batteries are intended for use in operation checking, and their service life may be short.

2. When the remote controllable distance becomes short, replace both of the batteries with new ones.

3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.

16

Playback of disc

Using the On-screen banner display


Basic play

Preparation

MAIN UNIT

POWER

DV-603/DVF-3060

TOP MENU key

DVF-3060K

TOP MENU key

6 (Play/Pause) key

POWER ON/ OFF switch

Disc tray

ON OFF

÷ Set the POWER ON/OFF switch to the ON (

) position.

÷ After the power is switched ON, there is a delay of about

3 seconds before the display is lit.

7 (Stop) key

7 (Stop) key

6 (PLAY/PAUSE) key

0 (open/close) key

7 (Stop) key

6 (Play/Pause) key

1

Load a disc.

MAIN UNIT

1

Open the tray.

Label side

0

2

Place a disc.

2

Start playback.

MAIN UNIT REMOTE

TITLE No. (DVD)

CHAPTER No. (DVD)

Time display

6

DV-603/DVF-3060

6

DVF-3060K

÷ When the 6 key is pressed while a tray is open, the tray closes automatically, and then playback begins.

When a Disc Menu appears on the screen

In case of interactive DVDs, a Disc Menu appears on the screen. Then press ENTER to select specific menu you want to play by using Cursor keys.

TRACK No. (CD/VCD)

÷ Each press pauses and plays the disc alternately.

When a menu screen is recorded on the disc, the menu screen will be displayed when the TOP

MENU key or MENU key is pressed. At the menu screen, the menu can be selected by pressing the

Cursor keys.

DV-603/DVF-3060

TOP MENU

DVF-3060K

To stop playback

MAIN UNIT REMOTE

7

DV-603/DVF-3060

7

DVF-3060K

RESUME playback

When the

7 (Stop) key has been pressed once during

playback to stop the playback, and then playback is started again, play will start from the point where the playback had been stopped. This is called the RE-

SUME function. When the

7 (Stop) key is pressed

again during stop, the RESUME function is cancelled.

RESUME is cancelled when 5 minutes have passed in

RESUME status.

Disc playback features

DV-603/DVF-3060

SLOW keys STEP keys


DVF-3060K

SLOW keys

1, ¡ (Search) keys

6 (Play/Pause) key

17

÷ You won't hear the sound (audio) on the DVD when you're using the Skip, Search, Step or Slow motion features.

÷ Playback features are not available during the opening credits of a movie.

1, ¡

(Search) keys

4, ¢

(Skip) keys

6 (Play/Pause) key

6 key

1, ¡ (Search) keys

4, ¢ (Skip) keys

MAIN UNIT

4 ¢

Skipping chapters or tracks

REMOTE

DV-603/DVF-3060

4 ¢

DVF-3060K

÷ The chapter (or track) in the direction of the key pressed is skipped, and the selected chapter (or track) will be played from the beginning.

÷ When the 4 key is pressed once during playback, the chapter (or track) being played will be played from the beginning.

4 : To skip backward

¢ : To skip forward

MAIN UNIT

Searching

REMOTE

1 ¡

1

¡

DV-603/DVF-3060

1 ¡

DVF-3060K

÷ During playback, press the 1 or ¡ key.

÷ Each press switches the searching speed.

(At the time of DVD playback)

1 X 2

(F.SEARCH 1)/(R.SEARCH 1)

2 X 4


3 X 8


4 X 16 (F.SEARCH 4)/(R.SEARCH 4)

(At the time of CD/VCD playback)

1 X 2

(F.SEARCH 1)/(R.SEARCH 1)*

2 X 4


3 X 8


* No audio is output during the fast forward or fast reverse operation at the 2x speed (1) of DTS-CD.

÷ Press the 6 key at any time to resume normal playback.

STEP (freeze frame and frame advance)

REMOTE

DV-603/DVF-3060

STEP

DVF-3060K

÷ During playback, press the STEP keys.

÷ Each time you press the keys, the picture advances one frame.

÷ At the time of VCD playback, backward STEP is not possible.

÷ Press the 6 key to resume normal playback.

REMOTE

Slow motion playback

DV-603/DVF-3060

SLOW

DVF-3060K

÷ During playback, press the SLOW keys.

÷ Each press switches the motion speed.

(At the time of DVD playback)

1 F.SLOW 1/16 (R.SLOW 1/16)

2 F.SLOW 1/8

(R.SLOW 1/8)

3 F.SLOW 1/4

(R.SLOW 1/4)

4 F.SLOW 1/2

(R.SLOW 1/2)

(At the time of VCD playback)

1 F.SLOW 1/8

(R.SLOW is not possible)

2 F.SLOW 1/4


3 F.SLOW 1/2


÷ Press the 6 key to resume normal playback.

18






19

The on-screen Banner Display contains many playback features. To see the Banner Display, press ON SCREEN key on the remote while a disc is playing. Use the Cursor (

2/3) keys on the remote to move through the different fea-

tures in the Banner Display. Each feature is illustrated with an icon.

1

During playback, press the ON SCREEN key on the remote.

When playing a DVD

TITLE

CHAPTER

AUDIO

SUBTITLES BOOKMARKS

ANGLES DISC TYPE

DV-603/DVF-3060

ON SCREEN

DVF-3060K

2

Press the Cursor left/right (

2/3) keys to high-

light a banner display icon.

DVF-3060K DV-603/DVF-3060

MULTI CONTROL

TIME INDICATOR

When playing a CD/VCD

TRACK

INTROSCAN TIME INFORMATION

BOOKMARKS DISC TYPE

3

Press the ENTER key.

DV-603/DVF-3060

ENTER

DVF-3060K

TIME INDICATOR

Time indicator contents

Switch the CD/VCD time indicator as follows.

1

Select the time information with the cursor key.

2

Each time the ENTER key is pressed, the time indicator changes as follows.

1 "Track Elapsed" :

Elapsed time of the track being played

2 "Track Remain" :

Remaining time of the track being played

3 "Disc Elapsed" :

Elapsed time of the disc being played

4 "Disc Remain" :

Remaining time of the disc being played

To display disappear from the screen

Press the ON SCREEN key or CLEAR key.

DV-603/DVF-3060

ON SCREEN

DVF-3060K

or

CLEAR

or

÷ You can only access the banner display when you're playing a disc.

÷ The banner display feature are only available if the disc was created with that particular feature (i.e., if you select the Subtitle icon, you won’t be able to change the subtitle language unless the author of the disc created the disc with subtitles).

÷ The invalid symbol appears on the screen when you press a key that doesn't have any function. If one of the icons is

"grayed out," the banner display feature isn't available for the disc you're playing.

20

Selecting a Title

Some discs contain more than one title.

For example, there might be four movies on one disc

(each movie might be considered a title).

1


DVF-3060K DV-603/DVF-3060

ON SCREEN



Selecting a Chapter or Track

Because DVD VIDEO discs use digital technology, a title can be divided into individual chapters (similar to tracks on a CD). You can skip a specific chapter by using the

Chapter section in the Banner Display.

1


DVF-3060K DV-603/DVF-3060

ON SCREEN

2


2/3) keys until the

TITLE icon is highlighted.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

2


2/3) keys until the

CHAPTER or TRACK icon is highlighted.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

3


("T__" appears)

DV-603/DVF-3060

ENTER

DVF-3060K

4

Use the numeric keys to enter the title number.

DV-603/DVF-3060

1

4

7 8

0

2

5

3

6

9

DVF-3060K

1 2

4

ECHO

5

7 8

0

3

6

9

3


("C__" or "Tr__" appears)

DV-603/DVF-3060

ENTER

DVF-3060K

4

Use the numeric keys to enter the chapter or track number.

DV-603/DVF-3060

1

4

7 8

0

2

5

3

6

9

DVF-3060K

1

4

ECHO

2

5

7 8

0

3

6

9

When you enter a one-digit Title number, you may have to press the ENTER key on the remote after pressing the numeric key (1~9) on the remote. Otherwise press 0 first and the other value. Then play starts. This varies depending on number of Title within the disc you're playing.

When you enter a one-digit chapter or track number, you may have to press the ENTER key on the remote after pressing the numeric key (1~9) on the remote. Otherwise press 0 first and the other value.

Then play starts. This varies depending on number of chapter or track within the disc you're playing.

Some discs only have one title.

÷ The Chapter feature won't work if the disc isn't formatted with separate chapters.

÷ P.B.C. on mode of VCD, the Selecting a Track function may not work.

‡

Select Audio Language

If the disc was created with different language tracks, you can use the Banner Display to temporarily change the DVD player’s Audio setting.

Using the on-screen banner display

1


DV-603/DVF-3060

ON SCREEN

DVF-3060K

2


2/3) keys until the

AUDIO icon is highlighted.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL



21

Select Subtitle Language

You can change the Subtitle language while you’re watching a disc (but only if the disc was created with subtitles).


1


DV-603/DVF-3060

ON SCREEN

DVF-3060K

2


2/3) keys until the

SUBTITLE icon is highlighted.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

3


DV-603/DVF-3060

ENTER

The audio menu appears

DVF-3060K

4

Select the audio language with press the EN-

TER key.

÷ The menu is switched off when no operation is performed for about 5 seconds.

Using the AUDIO key on the remote

1

During playback, press the AUDIO key on the remote.

DV-603/DVF-3060

AUDIO

DVF-3060K

2

Select the audio language with press the EN-

TER key or AUDIO key.


1. The language feature only works if the disc was created with multiple audio tracks.

2. When you chose an audio language from the Banner

Display, you only override the audio language setting in the DVD Player's main menu (in the Language

Preferences menu within Setup menu) temporarily.

3


DV-603/DVF-3060

ENTER

DVF-3060K

The subtitle menu appears

Displayed when

SUBTITLE is ON

4

Select the subtitle language with press the EN-

TER key.

5

Press the SUBTITLE ON/OFF key to subtitle ON or OFF.


Using the SUBTITLE key on the remote

1

During playback, press the SUBTITLE key on the remote.

DV-603/DVF-3060

DVF-3060K

SUBTITLE

2

Select the subtitle language with press the EN-

TER key or SUBTITLE key.

3

When the SUBTITLE ON/OFF key is pressed, subtitles will be displayed. Switching between display of subtitles and no display of subtitles is done each time the key is pressed.

DV-603/DVF-3060 DVF-3060K

ON/OFF

Displayed when

SUBTITLE is ON

1. The subtitle feature only works if the disc was created with multiple subtitle tracks.

2. The subtitle menu of the disc appears in some discs.

22

Select Camera angle

Some disc contains multiple angles particular scene or sequence. If the disc only has one angle, this feature won’t work.


1


DV-603/DVF-3060

ON SCREEN

DVF-3060K



Using IntroScan function

IntroScan plays the first few seconds of each track on the CD similar to the scan feature that's on many car radios.


1


DV-603/DVF-3060

ON SCREEN

DVF-3060K

2


2/3) keys until the

ANGLE icon is highlighted.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

2


2/3) keys until the

IntroScan icon is highlighted.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

3


DV-603/DVF-3060

ENTER

The ANGLE menu appears

DVF-3060K

3


DV-603/DVF-3060

ENTER

DVF-3060K

4

Select the angle with press the ENTER key.


Using the ANGLE key on the remote

1

During playback, press the ANGLE key on the remote.

DV-603/DVF-3060

ANGLE

DVF-3060K

2

Select the Camera angle with press the ENTER key or ANGLE key.


÷ The first 10 seconds of each track play.

÷ After Intro Scan goes through all of the tracks, it stops.

÷ If you want to stop IntroScan while it’s in progress, just press ENTER key on the remote (the current track starts playing in its entirety).

P.B.C. on mode of VCD, the IntroScan function may not work.

‡



23

Using Bookmarks

The bookmark feature lets you mark a point on the disc that you can go to quickly. You can store up to 9 bookmarks.

Create the bookmark Recalling a bookmarked scene

1


1


DV-603/DVF-3060

ON SCREEN

DVF-3060K DV-603/DVF-3060

ON SCREEN

DVF-3060K

2


2/3) keys until the

BOOKMARK icon is highlighted.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

2


2/3) keys until

the BOOKMARK icon is highlighted.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

3


DV-603/DVF-3060

ENTER

DVF-3060K

Return to the previous banner display

The bookmark menu appears

3


DV-603/DVF-3060

ENTER

DVF-3060K

The bookmark appears on under square

4

When you reach the scene you want to mark, press ENTER key.

DV-603/DVF-3060 DVF-3060K

ENTER

The bookmark appears on under square

4

Press the Cursor up (

5) key on the remote to

go the parts of the Bookmark menu.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

÷ Press the ON SCREEN key or CLEAR key to switch the menu off.

Clearing a bookmark

÷ The bookmark is cleared each time a disc is removed from the player or when the power is turned off.

÷ If all 9 bookmarks are in use, you can still mark new scenes, but the previous bookmarks will be erased.

÷ Depending on the disc, the Bookmark function may not work.

÷ P.B.C. on mode of VCD, the Bookmark function may not work.

‡

5

Use the Cursor left/right (

2/3) keys on the re-

mote to select the bookmarked scene you want to activate.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

6

Press the ENTER key to active the bookmark.

DVF-3060K DV-603/DVF-3060

ENTER

÷ You can go to bookmarked scene by the numeric key

(1~9) on the step

5.

÷ Press the ON SCREEN key or CLEAR key to switch the menu off.

24

Repeat play

Desired title or disc can be played back repeatedly.

÷ "Repeat Disc" : Repeat the disc that is playing.

÷ "Repeat Title" : Repeat the title that is playing.

÷ "Repeat Chapter" : Repeat the chapter that is playing.

÷ "Repeat Track" : Repeat the track that is playing.

During playback, press the REPEAT key on the remote.

DV-603/DVF-3060

REPEAT

DVF-3060K



A-B Repeat play

The A-B repeat function lets you mark a segment to repeat between the beginning "A" and the end "B" of the segment you want to replay.

1

Press the A-B key on the remote when you want to choose a scene (sound) as the beginning point.

DVF-3060K

DV-603/DVF-3060

A-B

The Repeat A- display appears

The Repeat display appears

Lit

Each press the key switches the REPEAT mode

At the time of DVD playback

1 "Repeat Disc" : Display lit "REPEAT ALL"

2 "Repeat Title" : Display lit "REPEAT"

3 "Repeat Chapter" : Display lit "REPEAT 1"

4 "Repeat Off"

At the time of CD/VCD playback

1 "Repeat Disc" : Display lit "REPEAT ALL"

2 "Repeat Track" : Display lit "REPEAT 1"

3 "Repeat Off"

At the time of REPEAT mode

"REPEAT" is light.

Display

2

Press the A-B key again to choose a scene

(sound) as the end point.

DV-603/DVF-3060 DVF-3060K

A-B

The Repeat A-B display appears

Lit

Display

÷ To cancel repeat playback, press the REPEAT key and select "Repeat off".


"MP3 Repeat play" e

Display

÷ To cancel A-B Repeat playback, press the A-B key and select "Repeat off".


P.B.C. on mode of VCD, the Repeat play function may not work.

‡

P.B.C. on mode of VCD, the A-B Repeat play function may not work.

‡



25

Random play

The tracks of the disc are played in random order.

During playback or stop mode, press RANDOM key on the remote.

DV-603/DVF-3060

RANDOM

DVF-3060K

The Random Play display appears

Lit

Display

Each time you press RANDOM key on the remote, random play would be on and off.

1 "Random Play"

2 "Standard Play"

The Standard Play display appears when random is off


"MP3 Random play" e

To repeat random play

During random playback, press the REPEAT key on the remote.

DVF-3060K

DV-603/DVF-3060

REPEAT

Each press the key switches the mode.

1 Display lit "REPEAT ALL"

2 Repeat canceled

÷ When the RANDOM key is pressed during playback, the tracks of the disc being played will be selected in random order for playback.

÷ After all tracks of a disc have been played in random order, playback will stop. (Random mode will be cancelled.)

÷ When playing a DVD, the Random function may not work.

÷ P.B.C. on mode of VCD, the Random play function may not work.

‡

26

Program play



You can listen to the desired tracks or chapters of the current disc in any desired order.

Program Edit

1

During stop mode, press the P.MODE key on the remote.

DVF-3060K

DV-603/DVF-3060

P.MODE

Lit

Program edit display appears.

PROGRAM EDIT

Title Chapter

All

Add

Delete

Play

Done

Playlist

T C

Display

2

Select specific title/chapter or track by Press

Cursor up/down (

5/∞) keys or numeric keys

(0-9).

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

3


DV-603/DVF-3060

ENTER

DVF-3060K

4

Select "Add" icon on the screen to register selected value onto Playlist, then press the

ENTER key.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

2

(An example of DVD program edit menu)

: Selected icon

: An icon which can be selected

: An icon which presently can not be selected

PROGRAM EDIT

Title Chapter

All

Add

Delete

Play

Done

Playlist

T C

2 All

ENTER

5

You can select maximum 32 values by repeating step

2 - 4.

6

Press the

6 key to start playback.

To repeat program play

During program playback, press the REPEAT key on the remote.

DVF-3060K

DV-603/DVF-3060

REPEAT



2 Repeat canceled

"Add" icon : Add value onto "Playlist"

"Delete" icon : Delete value from "Playlist"

"Insert" icon : Insert value in "Playlist"

"Play" icon : Play program play

"Done" icon : Return to stop or resume mode

÷ When you don’t add values onto "Playlist" and return to play mode, select "Done" icon and press ENTER key on the remote.

÷ While a disc is playing, press P.MODE key on the remote to start Program play

÷ To return to standard play, press the P.MODE key again.

÷ MP3 discs can not be programmed with this program mode.

(MP3 program play r

)


27

Insert chapter or track

During stop mode, press the P.MODE key on the remote

1

Select specific title/chapter or track to insert by

Press Cursor up/down (

5/∞) keys or numeric

keys (0-9).

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

Program edit display appears.

PROGRAM EDIT

Title Chapter

All

Insert

Delete

Play

Done

2

Move the cursor with the Cursor right (

3) key to

the "Playlist" and select the column to be added with the Cursor up/down (

5/∞) keys. (The color

of the column where the Cursor is located will change.)

DVF-3060K

DV-603/DVF-3060

MULTI CONTROL

3

Press the Cursor left (

2) key, use the Cursor up/

down (

5/∞) keys to move the Cursor to the "In-

sert" icon, and press the ENTER key.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

PROGRAM EDIT

Title Chapter

All

Insert

Delete

Play

Done

Playlist

T C

All

(An example of DVD program edit menu)

All

Playlist

T C

All

All

All

ENTER

The new chapter or track will be inserted before

(above) the selected column.

Delete Program

During stop mode, press the P.MODE key on the remote

1

Move the cursor with the Cursor right (

3) key to

the "Playlist" and select the column to be deleted with the Cursor up/down (

5/∞) keys.(The color

of the column where the Cursor is located will change.)

DVF-3060K

DV-603/DVF-3060

PROGRAM EDIT

Title Chapter

All

Add

Delete

Play

Done

Playlist

T C

All

All

MULTI CONTROL

2

Press the Cursor left (

2) key, use the Cursor up/

down (

5/∞) keys to move the Cursor to the "De-

lete" icon, and press the ENTER key. Or press the CLEAR key.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

ENTER

Selected value deletes

P.B.C. on mode of VCD, the Progam play function may not work.

‡

Release Program play

In following case, Program play would be released.

1. When you open and close tray.

2. When you turn power off and on.

28

Set Up functions



Set up menu

The initial setup of the player, which has been made at the factory, can be changed to the desired setup.

1 During stop mode or resume mode, press MENU

key on the remote.

DV-603/DVF-3060

MENU

DVF-3060K

Current setup menu display appears on the screen.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the item, then press the ENTER key to access the sub features

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

(Menu display example)

ENTER

Audio / Subtitle

(Disc languages)

Menus

: This sets the language to be used when playing a disc. (If a disc does not contain the recording the selected language, it is played in the priority language set for each disc.)

: This sets the initial setup of language as well as the language used in on-screen messages such as

"PLAY".

Rating : This can restrict playback of adult-oriented DVD discs that you do not want to be seen by children.

However, even when a DVD disc is marked “Adult-oriented” or so on the label, its viewing cannot be restricted unless the restriction level is recorded in the disc itself.

: The password for rating setting, change, cancellation, etc. is set.

Password

TV Aspect : This sets the screen size (4:3 or 16:9 aspect ratio) according to the connected TV.

4 x 3 letterbox : Choose this setting if you would prefer to see movies in their original aspect ratio. You will see the entire frame of the movie, but it will occupy a smaller portion of the screen. This setting may result in the movie ap-

4 x 3 Pan Scan pearing with black bars at the top and bottom of the screen.

: Choose this setting if you want the movie to fill the entire screen of your

TV. You won’t see part of the picture (particularly the right and left edge).

Some disc produced in a wide screen format can’t be cropped in this fashion, which means the black bars would appear at the top and the bottom of the screen.

16 x 9 Widescreen : Choose this setting if your DVD player is connected to a widescreen TV.

Dynamic Range : This is set to ON when the volume change should not become overly large, for example when listening late at night.

Digital Audio Out : This sets the type of audio output from the digital audio output jack.

Linear PCM : The player can output digital signal with maximum sampling rate of 96 kHz from the digital audio output connector. When a DVD disc recorded in high sampling rate PCM is played, this setting makes it possible to select whether the signal is converted into 48 kHz signal.

How to use the RETURN key

When the RETURN key is pressed, the display returns to the previous screen (STOP mode).

DV-603/DVF-3060

RETURN

DVF-3060K

Select Audio Language

1 Press Cursor up/down (5/∞) keys on the remote

to select "Audio" on the set up menu display, then press the ENTER key.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL



29

Select Subtitle Language


to select "Subtitles" on the set up menu display, then press the ENTER key.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

ENTER

ENTER

(Audio menu appears.) (Subtitle menu appears.)


to select specific Audio language, then press the

ENTER key.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

2 Press Cursor up/down (5/∞) keys on the re-

mote to select specific Subtitle language, then press the ENTER key.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

ENTER

To select other language

1 Select "Other" and press ENTER key

ENTER

To select other language

1 Select "Other" and press ENTER key

2 Input code in the first digit by Press Cursor

up/down (

5/∞) keys or numeric keys on the

remote and repeat other 4 code with same way.

3 Press the ENTER key on "OK" icon.

(DVD menu language code list

t)

÷ Press 6 key to resume normal playback.

2 Input code in the first digit by Press Cursor

up/down (

5/∞) keys or numeric keys on the

remote and repeat other 4 code with same way.

3 Press the ENTER key on "OK" icon.

(DVD menu language code list

t)


30

Select Menu Language

1


5/∞) keys on the remote

to select "Menus" on the set up menu display, then press the ENTER key.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

ENTER



Select Rating

This part of DVD rating lets you determine how your player will react discs that contain movies that are rated

(in the U.S.A. the Motion Pictures Association of

America rates movies as G, PG, PG-13, etc.).

1



to select "Rating" on the set up menu display, then press the ENTER key.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

(Menus appears.)

ENTER

When a password already has been set, the screen for change of the entered password will be displayed. In that case, enter the password.

⁄

(Rating aspect menu appears.)

2



to select specific Menu language, then press the

ENTER key.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

ENTER


2


5/∞) keys on the re-

mote to highlight rated titles, then press the

ENTER key.

DV-603/DVF-3060

MULTI CONTROL

DVF-3060K

ENTER


Parental lock level

Level 8: All DVDs can be played back.(Factory preset)

Level 7 to 2: DVDs for general audiences/children can be played back. (DVDs for adults are prohibited.)

Level 1: DVDs for children can be played back. (DVDs for adults/general audiences are prohibited.)



31

Password

Set password

1



to select "Password" on the set up menu display, then press the ENTER key.

DVF-3060K DV-603/DVF-3060

MULTI CONTROL

4

Press ENTER key to finish password input (Confirm Password display appears below Enter

Password display).

ENTER

(Password menu appeaars.)

5



keys on the remote to enter again password that you entered.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

2

After select "Set Password", press the ENTER key.

DVF-3060K DV-603/DVF-3060

MULTI CONTROL

ENTER

6

Press the ENTER key on "OK" icon.

DVF-3060K DV-603/DVF-3060

ENTER

3



keys on the remote to enter password.


32

Password (continued)

Change password

1




DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

ENTER



4




DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

5

Press ENTER key to finish password input (Confirm Password display appears below Enter

Password display).

(Enter Password menu appears.)

2





DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

6



keys on the remote to enter again password that you entered.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

ENTER

3


5/∞) keys to select

"Change Password", then press ENTER key.

7


DV-603/DVF-3060 DVF-3060K

ENTER


Password (continued)

Clear password

1




DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

TV aspect



33

1



to select "TV Aspect" on the set up menu display, then press the ENTER key.

DV-603/DVF-3060

MULTI CONTROL

DVF-3060K

ENTER

ENTER

(Enter Password menu appears.) (TV Aspect menu appears.)

2





DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

2



to select TV Aspect menu, then press the ENTER key.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

ENTER

ENTER


3


5/∞) keys to select

"Clear Password", then press ENTER key.


34

Dynamic Range

1



to select "Dynamic Range" on the set up menu display, then press the ENTER key.

DV-603/DVF-3060

MULTI CONTROL

DVF-3060K

ENTER

(Dynamic Range menu appears.)



Digital Audio Out

PCM : Choose this setting for all connection scenarios, except the Dolby Digital or DTS receiver or decoder connection.

Dolby Digital : Choose this setting if you connected Dolby

Digital receiver or decoder to your DVD player.

DTS : Choose this setting if you connected DTS receiver or decoder to your DVD player

Except for U.S.A. , Canada and U.S. Military

MPEG/DTS : Choose this setting if you connected DTS receiver, decoder or MPEG audio to your DVD player.

1



to select "Digital Audio Out" on the set up menu display, then press the ENTER key.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

ENTER

(Digital Audio Out display appears.)

2



to select Dynamic Range mode (on or off), then press the ENTER key.

DV-603/DVF-3060

MULTI CONTROL

DVF-3060K

ENTER


2



to select specific Digital Audio Out mode, then press the ENTER key.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

DTS disclaimer clause

When playing DTS-encoded (CDs, LDs, DVDs), excessive noise will be exhibited from the analog stereo outputs. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the DVD player is connected to an amplification system.

To enjoy DTS Digital Surround™ playback, an external 5.1

channel DTS Digital Surround™ decoder system must be connected to the digital output (S/P DIF, AES/EBU, or

TosLink) of the DVD player.

ENTER


When the DTS of Digital Audio Out or the Dolby Digital setting and the format recorded on the disc are different from each other, audio may not be put out. Please switch according to the indication on the disc.

Linear PCM

96kHz => 48kHz : Even in case of 96 kHz digital signal,

DVD will deliver 48 kHz signal out.

96kHz => 96kHz : In case of 96 kHz digital signal, DVD will deliver 96 kHz signal out. In this case your receiver should control 96 kHz signal.

1



to select "Linear PCM" on the set up menu display, then press the ENTER key.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

ENTER

(Linear PCM display appears.)



35

2


5/∞) keys on the remote to

select "96kHz => 48kHz" or "96kHz => 96kHz", then press the ENTER key.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

ENTER


36

Menu playback

Hierarchical structure of VCD menus

When an item is selected on the menu screen during playback of a P.B.C.-compatible VCD, another menu with more details items may be displayed. When a number of menus are connected in multiple layers in this way, it is said that the menus have a hierarchical structure. In this structure, the desired scene can be reached by repeating item selections on the menu screens.

Example for a hierarchical structure



First level (menu)

Second level (submenu)

Third level (scenes)

Advancing

When an item is selected on the menu screen with the

ENTER (Select) key or the numeric keys, advance is made to the next lower menu level. When the advance destination is the "scene" to be played, the contents will be played.

÷ When several menus (scenes) can be selected in each level, screen switching is possible with the keys

¢

(NEXT) and

4 (PREV.).

Returning

Each time the RETURN key is pressed, return is made to the next higher menu.

Examples of operation keys and indications used during VCD playback

Soft jacket indication

3

4 ¢

¢

KENWOOD operation key

6

RETURN

4

÷ Depending on the software, the jacket indication may differ from the above.

3 (Select)

ENTER


37

Playback without using the menu playback function

(In case of a P.B.C.-compatible VCD) (To P.B.C. On or Off)

During VCD playback, press the TOP MENU key on the remote control unit.

DV-603/DVF-3060 DVF-3060K

÷ For the track numbers, refer to the disc jacket or other material.

÷ P.B.C. off mode : Without using menu playback function.

P.B.C. off mode

Goes off

TOP MENU

To return to menu playback

Press the TOP MENU key again.

P.B.C. on mode

Lit

Selecting the Audio channel

You can choose to play back only the right or the left channel of audio recorded on the disc, or you can select stereo playback. This function is used for purposes such as selecting the vocal track on a Karaoke disc.

During VCD playback, press AUDIO key on the remote.

DV-603/DVF-3060 DVF-3060K

AUDIO


1

Stereo

2

Left

3

Right

38

Enjoying karaoke singing

(only DVF-3060K for some areas)


Preparation

1

Load a disc and Connect a microphone.

1

Open the tray.

0

2

Place a disc.

MIC LEVEL

MIN MAX

2

Start playback.

LEVEL

6

MIN MAX

÷ When the 6 key is pressed while a tray is open, the tray closes automatically, and then playback begins.

÷ Adjust volume level of the microphone.

1. Karaoke mode operation is possible only when a microphone is connected.

2. When this unit is connected with an amplifier or receiver with only the digital connection, the microphone audio cannot be output. Use the AUDIO

OUTPUT jacks to output the microphone audio from this unit.

Selecting the Audio channel

You can choose to play back only the right or the left channel of audio recorded on the disc, or you can select stereo playback. This function is used for purposes such as selecting the vocal track on a Karaoke disc.

During VCD playback, press AUDIO key on the remote.

Each press key switches the mode.

1

Stereo

2

Left

3

Right

Controlling the key of the music

(KEY CONTROL)

This feature allows to transpose the key of the music according to the key of the singer’s voice.

KEY CONTROL icon 1

Press the Key Control key during playback to display the karaoke OSD on the TV screen.

Press within 5 seconds after pressing the SHIFT key.

4 5 6

SHIFT

KARAOKE mode icon

÷ Press the next key within 5 seconds of pressing the SHIFT key.

2

Press the cursor up/down (

5/∞) or Key Control

keys to adjust the level of the key.


or

SHIFT

Downward

4 5

Upward

6

÷ KEY CONTROL can be varied from -3 to +3.

÷ Press the Cursor left or right (2/3) key while the OSD is displayed to select another icon.

÷ To turn off the OSD, press the ON SCREEN key or CLEAR key.

÷ To exit from the KARAOKE mode, select the KARAOKE mode ion while the OSD is displayed and press the ENTER key.


39

Adjust the ECHO level

1

Press the ECHO key during playback to display the karaoke OSD on the TV screen.


1

ECHO

2

SHIFT

Echo icon

KARAOKE mode icon

÷ Press the next key within 5 seconds of pressing the SHIFT key.

2

Press the cursor up/down (

5/∞) or Key Control

keys to adjust the level of echo.


or

To decrease the ECHO level

1

SHIFT

2

To increase the ECHO level

ECHO

÷ The echo effect can be varied from 0 to 9.




An echo effect can be applied to the microphone voice to make karaoke singing sound better.

HIT MASTER function

The sound level of the vocal part of the disc is suppressed, so that it can be used in the same way as a KARAOKE disc.

1

Press the HIT MASTER key during playback to display the karaoke OSD on the TV screen.

HIT MASTER icon

HIT MASTER

2

Press the ENTER or HIT MASTER key to switch it

ON/OFF.

HIT MASTER

or

KARAOKE mode icon


1

HIT MASTER ON

2

HIT MASTER OFF




Depending on the disc, the suppression amount may be smaller.

40

MP3 function



Guidance of MP3

MP3 media that can be played back with this equipment

Usable media : CD-ROM, CD-R, CD-RW

Usable formats : ISO9660 level 1 (excluding expanded formats)

Files that can be played back : MP3 files

Creating media for playing back on this equipment

Compressing MP3

Please set up the transfer bit rate setting for the compression software when compressing MP3 files as follow.

MP3 Files : 128kbps recommended (32kbps-320kbps)

÷ This unit is compatible with 32 kHz, 44.1 kHz(recommended) and 48 kHz sampling frequencies.

Naming folders and files

Single-byte characters between A and Z, single-byte numerais between 0 and 9, and the single-byte underscore(_) can be displayed.

ensure that the "MP3" (MP3 files) extension log is attached to all file names.

÷ Never add the MP3 extension log to any files other than MP3 files. If the MP3 extension log is added to any files other than

MP3 files, the equipment will assume that they can be played back, and this will produce loud noises in the speakers, resulting in damage of adverse effects.

Confirming media and files

Check to ascertain that MP3 files can be played back correctly on the personal computer in use prior to saving them onto the media.

Check to ensure that the saved file can be played back normally.

÷ It is not possible to confirm that files can be played back correctly while they are being saved onto the media.

When saving files onto media

Ensure that the session is closed or finalized when data has been written on media. There are cases where media on which the session has not be closed or finalized will not be played back correctly with this equipment.

÷ There are cases were the folder names and file names will not be displayed correctly depending on the software used to

save them.

÷ Do not store files or folders other than MP3 on media to be played back with this equipment.

÷ It is recommended that ten or less sessions are stored when recording MP3 files onto a media.

÷ Some time may be required until the playback of multi-session discs starts.

÷ There are cases where playback is not possible when MP3 files (CD-ROM) and music CD infomation (CD-DA) are saved on

the same media.

Example for a hierarchical structure


41

Playing back MP3

÷ It is not possible to play back folders and files(up to 223)

that exceed the maximum limitations of the media.

÷ A certain amount of time is required for the player to

confirm the media on which MP3 files have been recorded before playback will commence.

÷ The files will be played back in the sequence in which

they were recorded (written).

Playback

Each press pauses and plays the disc alternately.

(When you insert the MP3 media, playback will start automatically.)

MAIN UNIT REMOTE

DV-603/DVF-3060 DVF-3060K

6

6

(When you insert MP3 media, the MP3 On-screen display appears.)

Standard Play

LIKE-1

1 0:00:01

LIKE-1

LUCKY-1

LET IT-1

YESTERDA

TRUE-1

OPEN-1

WHIHE-1

WHIHE-2

NEVER-2

ALL CLEAR

To stop playback

Press the

7 (STOP) key.

MAIN UNIT REMOTE

7

DV-603/DVF-3060

7

DVF-3060K

Skipping files

During playback, press the

4 or ¢ key.

MAIN UNIT

4 ¢

REMOTE

DV-603/DVF-3060

4 ¢

DVF-3060K

4 : To skip backward

¢ : To skip forward

Fast forwarding and fast reversing is not possible with MP3 files.

MP3 On-screen display

Playing file name

Playing mode

Playing file No.

Time elapsed

Standard Play

LIKE-1

1 0:05:34

MY SONG1

HALLOW-1

MEGADETH

MADONNA

RCY23MNN

EXTREME

CARMAN-1

ITALY

EGALES

ALL CLEAR

Folder icon

Root icon ALL CLEAR icon

Program Play

LIKE-1

1

HALLOW-1

LIKE-1

LUCKY-1

LET IT-1

YESTERDA

TRUE-1

OPEN-1

WHIHE-1

LIKE-1

LUCKY-1

LIKE-3

INTORO-1

YESTERDA

WHIHE-1

HOLIDAY

OPEN-1

ALL CLEAR

Files

Return folder icon

Program window

Folder names and file names are displayed up to 8 characters. When folder names and file names are recorded with more than 8 characters, the names will be displayed in abbreviated form.

42

Selecting MP3 files

1



mote to select the folder, then press the EN-

TER key.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

ENTER

2



mote to select the file, then press the ENTER key.

DV-603/DVF-3060

MULTI CONTROL

DVF-3060K

ENTER

÷ Playback will start from selected file.

Selects the files to be played back directly

1

Press the Cursor right (

3) key on the remote to

invert the file numbers.

DV-603/DVF-3060

MULTI CONTROL

DVF-3060K

2

Press the numeric keys on the remote to enter the desired file number.

DV-603/DVF-3060

1

4

7

2

5

8

0

3

6

9

DVF-3060K

1

4

ECHO

2

5

7 8

0

3

6

9

÷ If "_ _ _" is displayed after completion of the file number entry, press the ENTER key before "_ _ _" disappears.

÷ Playback will start from selected file.


÷ The files and folders in the selected folder appear.

Standard Play

LIKE-1

1 0:05:34

LIKE-1

LUCKY-1

LET IT-1

YESTERDA

TRUE-1

OPEN-1

WHIHE-1

WHIHE-2

NEVER-2

ALL CLEAR

Standard Play

LIKE-1

1 0:05:34

LIKE-1

LUCKY-1

LET IT-1

YESTERDA

TRUE-1

OPEN-1

WHIHE-1

WHIHE-2

ALL CLEAR

Press ENTER key on RETURN folder icon to move to the upper layer.

Standard Play

LIKE-1

LUCKY-1

LET IT-1

YESTERDA

TRUE-1

OPEN-1

WHIHE-1

WHIHE-2

NEVER-2

File No.

LIKE-1

1 0:05:34

ALL CLEAR

Standard Play

WHIHE-1

WHIHE-2

NEVER-2

WHIHE-1

7 0:00:01

ALL CLEAR


43

MP3 Repeat play

Desired folders or discs can be played back repeatedly.

÷ "Repeat 1 Disc" : Repeat the disc that is playing.

÷ "Repeat 1 Folder" : Repeat the folder that is playing.

÷ "Repeat Track" : Repeat the file that is playing.

During playback, press the REPEAT key on the remote.

DV-603/DVF-3060 DVF-3060K

REPEAT

Each press the key switches the REPEAT mode

1 "Repeat 1 Disc" : Display lit "REPEAT ALL"

2 "Repeat 1 Folder" : Display lit "REPEAT ALL"

3 "Repeat Track" : Display lit "REPEAT 1"


Repeat 1 Disc

LIKE-1

1 0:05:34

LIKE-1

LUCKY-1

LET IT-1

÷ To cancel repeat playback, press the REPEAT key and select "Standard Play".

ALL CLEAR

Lit

When the folder played by repeat play contains subfolders, the files in the subfolders cannot be played back.

MP3 Random play

The files of the disc are played in random order.

During playback or stop mode, press RANDOM key on the remote.

DV-603/DVF-3060 DVF-3060K

RANDOM

Display

Each time you press RANDOM key on the remote, random play would be on and off

1 "Random Play"


Random Play

LIKE-1

1 0:05:34

÷ When the RANDOM key is pressed during playback, the tracks of the disc being played will be selected in random order for playback.

÷ After all tracks of a disc have been played in random order, playback will stop. (Random mode will be cancelled.)

ALL CLEAR

To repeat random play

During random playback, press the REPEAT key on the remote.

DVF-3060K

DV-603/DVF-3060

REPEAT



2 Repeat canceled

Lit

Display

It is not possible to perform random play by specifying a folder name.

÷ Pressing the REPEAT key during random play causes the ran-

44


MP3 program playback

You can listen to the desired files of the current MP3 disc in any desired order.

Program Edit

1

During stop mode, press the P.MODE key on the remote.

Lit

DV-603/DVF-3060 DVF-3060K

P.MODE

Display

2



to select the file, then press the ENTER key.

DV-603/DVF-3060 DVF-3060K

MULTI CONTROL

Program Edit

LIKE-1

LIKE-1

1 0:00:00

LIKE-1

LUCKY-1

LET IT-1

YESTERDA

TRUE-1

OPEN-1

ENTER

÷ The selected file go to program window.

÷ You can select a maximum of about 100 files by repeating step

2

. However, note that the maximum number of programmable files depending on the number of files and folders in the MP3 disc and on the total number of characters used in the file and folder names.

3

Press

6 key to start program playback.

÷ To return to standard play, press the P.MODE key again.

÷ If a file number is entered during editing or playing a

MP3 program, the program mode will be canceled.

ALL CLEAR

Press ENTER key on RETURN folder icon to move to the upper layer.

Program repeat play is not available with MP3 discs.

Delete Program

During stop mode, press Cursor left/right (

2/3)

keys on the remote to select the "ALL CLEAR" icon, then press the ENTER key.

DV-603/DVF-3060

MULTI CONTROL

DVF-3060K

Program Edit

LUCKY-1

2

LIKE-1

LUCKY-1

LET IT-1

YESTERDA

TRUE-1

OPEN-1

WHIHE-1

HOLIDAY

INTORO-1

0:00:00

LIKE-1

LUCKY-1

LET IT-1

YESTERDA

TRUE-1

OPEN-1

WHIHE-1

HOLIDAY

ALL CLEAR

ENTER

÷ The program deletes.

÷ You can delete file one by one by selecting in Program window and pressing CLEAR key on the remote.

Program Edit

LUCKY-1

2

LIKE-1

LUCKY-1

LET IT-1

YESTERDA

TRUE-1

OPEN-1

WHIHE-1

HOLIDAY

INTORO-1

0:00:00

LIKE-1

LUCKY-1

LET IT-1

YESTERDA

TRUE-1

OPEN-1

WHIHE-1

HOLIDAY

ALL CLEAR

DVD menu language code list

Language

Corsican

Czech

Welsh

Danish

German

Bhutani

Greek

English

Esperanto

Spanish

Estonian

Basque

Persian

Finnish

Fiji

Faroese

Afar

Abkhazian

Afrikaans

Amharic

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Byelorussian

Bulgarian

Bihari

Bengali; Bangla

Tibetan

Breton

Catalan

French

Frisian

Irish

Scots Gaelic

Galician

Guarani

Gujarati

Hausa

Hindi

Cord No.

6979

6983

6984

6985

7065

7073

7074

7079

6779

6783

6789

6865

6869

6890

6976

6978

7082

7089

7165

7168

7176

7178

7185

7265

7273

6665

6669

6671

6672

6678

6679

6682

6765

6565

6566

6570

6577

6582

6583

6588

6590

Language

Croatian

Hungarian

Armenian

Interlingua

Indonesian

Icelandic

Italian

Hebrew

Japanese

Yiddish

Javanese

Geogian

Kazakh

Greenlandic

Cambodian

Kannada

Korean

Kashmiri

Kurdish

Kirghiz

Latin

Lingala

Laothian

Lithuanian

Latvian; Lettish

Malagasy

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Malay

Maltese

Burmese

Nauru

Nepali

Dutch

Nowegian

Oriya

Punjabi

Cord No.

7686

7771

7773

7775

7776

7778

7779

7782

7579

7583

7585

7589

7665

7678

7679

7684

7783

7784

7789

7865

7869

7876

7879

7982

8065

7465

7473

7487

7565

7575

7576

7577

7578

7282

7285

7289

7365

7378

7383

7384

7387


45


Cord No.

8482

8484

8487

8575

8582

8590

8673

8679

8779

8872

8979

9072

9085

8386

8387

8465

8469

8471

8472

8473

8475

8476

8479

8372

8373

8375

8376

8377

8378

8379

8381

8382

8385

8076

8083

8084

8185

8277

8279

8285

8365

8368

Language

Swahili

Tamil

Telugu

Tajik

Thai

Tigrinya

Turkmen

Tagalog

Tonga

Turkish

Tatar

Twi

Ukrainian

Urdu

Uzbek

Vietnamese

Volapük

Wolof

Xhosa

Yoruda

Chinese

Zulu

Polish

Pashto; Pushto

Portuguese

Quechua

Rhaeto-Romance

Romanian

Russian

Sanskrit

Sindhi

Serbo-Croatian

Singhalese

Slovak

Slovenian

Samoan

Shona

Somali

Albanian

Serbian

Sundanese

Swedish

46

In case of difficulty


What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or service representative.

Operation to reset

The microprocessor may fall into malfunction (impossibility to operate erroneous display, etc.) when the power cord is unplugged while power is ON or due to an external factor. In this case, execute the following procedure to reset the microprocessor and return it to normal condition.

÷ Please note that resetting the microprocessor clears the contents stored in, it returns the microprocessor to the condition when it left the factory.

1

In Power ON condition, keep the

7 (Stop) key and the ¡

(Search) key pressed at the same time.

2

When both keys are pressed, the region code of the unit, the software version, etc. will be displayed on the display. (When nothing is done, the display of this information continues.)

Example: 72. 14.02:05

3

Press the POWER ON/OFF switch to go to Power OFF.

4

When Power ON is performed with the POWER ON/OFF switch, the settings become the default factory settings.

DVD player unit

Symptom

Playback does not start when the

6 key is

pressed.

Playback starts but no image/sound is seen/ heard.

The picture is disrupted when the image is fast forwarded or fast reversed.

No sound is heard.

The picture does not look good or the picture/sound quality is poor.

÷ A nearby device is generating noise.

÷ The disc is dirty.

÷ The disc is damaged.

÷ There is condensation on the optical lens.

It takes a while for the disc to start playing.

The tray opens automatically.

The top and bottom of the screen cannot be seen.

÷ Time is required for the unit to detect the disc type and size and for the rotation of the motor to stabilize. This is not a malfunction.

÷ The disc is not placed horizontally.

÷ The video format of the disc being played does not match that of the connected TV monitor.

The subtitle is not displayed.

The voice (or subtitle) language cannot be changed.

÷ The DVD disc being played does not contain the recording of more than one audio (or subtitle) language.

The viewing angle cannot be changed.

Cause

÷ There is no disc in the player.

÷ There are no signals recorded on the side of the disc being played.

÷ The TV is not turned on.

÷ The connection cords are not properly connected.

÷ The picture is slightly disrupted during fast forward and fast reverse operations.

÷ The audio output cords are not properly connected.

÷ The volume control of the TV or amplifier is not adjusted properly.

÷ The player is in a special playback mode.

÷ The DVD disc being played does not contain the recording of subtitles.

÷ The subtitle mode is set to off.

÷ The DVD disc being played does not contain the recording of more than one angle.

÷ You are attempting to switch the angle in a

DVD section where more than one angle is not recorded.

Remedy

÷ Load a disc and press the 6 key.

÷ Turn the disc over and properly place it on the disc tray.

÷ Turn on the TV.

÷ Properly reconnect the connection cords.

÷ This is not a malfunction.

÷ Properly connect the audio cords.

÷ Set the sound volume to an appropriate level.

÷ Press the 6 key to resume normal playback mode.

÷ Separate this unit as far as possible from the device you think is generating the noise.

÷ Refer to the "Disc handling precautions" section and wipe dirt from the disc.

0

÷ Use a new disc.

÷ Refer to the "Caution on condensation" section and evaporate the condensation.

0

÷ Approximately 10 to 20 seconds are required for a disc to start playing, although the time differs depending on the disc.

÷ Properly place the disc on the tray.

÷ Refer to the "Video formats" section ,and use a disc with the appropriate video format for your TV or a TV with the appropriate video format for the disc.

9

÷ The subtitle cannot be displayed when the

DVD disc being played does not contain the recording of subtitles.

÷ Press the SUBTITLE ON/OFF key to switch on the subtitle mode.

¡

÷ The voice (or subtitle) language cannot be changed when the DVD disc being played does not contain the recording of more than one voice (or subtitle) language.

÷ The viewing angle cannot be changed when the DVD disc being played does not contain the recording of more than one angle.

÷ More than one viewing angle may be recorded only in limited sections in a disc.

In case of difficulty

47


DVD player unit

Symptom

Playback will not start even after a title is selected.

Cause

÷ A viewing restriction (RATING) has been set for the disc.

The viewing restriction level (RATING) cannot be changed.

÷ You have forgotten the viewing restriction

(RATING) password.

Remedy

÷ Check the viewing restriction level (RAT-

ING) setting.

÷ Set the initial setup to the factory setup with the following procedure.

1 In POWER ON condition, keep the

7

(Stop) key and the

¡ (Search) key pressed at the same time.

2 When both keys are pressed, the region code of the unit, the software version, etc. will be displayed on the display.

(When nothing is done, the display of this information continues.)

3 Press the POWER ON/OFF switch to go to Power OFF.

4 When Power ON is performed with the

POWER ON/OFF switch, the settings become the default factory settings.

÷ Use a DVD disc containing the recording of the selected voice or subtitle language.

The voice or subtitle language selected in the initial setting is not played.

÷ The DVD disc being played does not contain the recording of the selected voice or subtitle language.

No message appears on the TV screen after a key is pressed.

÷ The function for displaying message on the TV screen (On-Screen Messages) is set to off.

Menu screen messages are not shown in the desired language.

÷ The menu language function (MENU) is not set.

A VCD cannot be played using menus.

÷ The VCD disc being played is not compatible with P.B.C.

Remote control unit

Symptom

Remote control operation is not possible.

Cause

÷ Batteries are exhausted.

÷ The remote control is too far away from the system, the controlling angle is deviated or there is an obstacle in between.

÷ Set On-Screen Messages to on.

÷ Set the disc menu language function

(MENU) as required.

÷ Menu playback is available only with VCD discs recorded with P.B.C.

Remedy

÷ Replace with new batteries.

÷ Operate the unit inside the remote controllable range.

Inhibition icon

Symptom Cause Remedy

The inhibition icon is displayed and remote control is not possible.

÷ Playback is restricted intentionally by the software producer.

÷ The operation is inhibited. Please try another operation.

Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216,

4,819,098 and 4,907,093 licensed for limited viewing uses only.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

[ For U.S.A. and Canada ]

Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch the connection to the "STANDARD DEFI-

NITION" output. If there are questions regarding our TV set compatibility with this model 525p DVD player, please contact our customer service center.

Manufactured under license from Dolby Laboratories.

"Dolby" and the double-D symbol are trademarks of Dolby

Laboratories.

"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.

48

Specifications

[Type]

System ................................................... DVD video player

Signal read system ......................... Semiconductor laser

[D/A Conversion Section]

D/A conversion ........................................................ 24 Bit

Oversampling ... 8 fs (Sampling frequency; 44.1, 48 kHz)

......................... 4 fs (Sampling frequency; 96 kHz)

[Audio section]

Frequency response

Sampling frequency ; 44.1 kHz ............ 4 Hz ~ 20 kHz

Sampling frequency ; 48 kHz ............... 4 Hz ~ 22 kHz

Sampling frequency ; 96 kHz ............... 4 Hz ~ 42 kHz

Signal to noise ratio .............................. More than 98 dB

Dynamic range ....................................... More than 95 dB

Total harmonic distortion ...... Less than 0.005 % (1 kHz)

Channel separation ................... More than 95 dB (1 kHz)

Wow and flutter ........................ Below measurable limit

Analog output level/impedance ...................... 2 V / 1 k

Ω

Digital output level/impedance

COAXIAL .............................................. 0.5 Vp-p / 75

Ω

OPTICAL ..... -21 dBm ~ -15 dBm (Wave length 660 nm)

[Video Section]

Video output format

(For U.S.A., Canada and U.S. Military)

......................................................................... NTSC


................................................................. NTSC/PAL

Video compression

DVD ................................................................... MPEG-2

Composite video output level

......................... 1 Vp-p (75

Ω

load, sync. negative)

S-video output level

(Y-signal) .............. 1 Vp-p (75

Ω

load, sync. negative)

(C-signal)

NTSC ........................................... 0.286 Vp-p (75

Ω

)

PAL .............................................. 0.300 Vp-p (75

Ω

)

Horizontal resolution ........................ More than 480 lines

Video signal to noise ratio .................... More than 60 dB


[General]

Power consumption .................................................. 16 W

Dimensions .................................. W : 440 mm (17-5/16”)

.......................................................

H : 75 mm (2-15/16”)

.......................................................

D : 282 mm (11-1/8”)

Weight (net) ................................................. 3.1 kg (6.8 lb)

KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.

÷ Sufficient performance may not be exhibited at extremely cold locations (Where water freezes).

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.

Model Serial Number

No results