Mikros Kondensator K6 GB USA
K6
Microphones | K6 Modular System
Cat. No. 003279
General Description
The K6 powering module is the heart of this Sennheiser professional modular microphone system and can be powered either by its internal ‘AA’ size
1.5 V battery or by 12 – 48 V phantom power. The K6 can be combined
with different condenser microphone heads to provide a wide variety of
polar patterns. Matt black, anodised scratch-resistant finish.
Technical Data
Frequency response ..................................... 30 – 20,000 Hz - 1 dB
Transmission factor (1 kHz) .......................................................0 dB
Nominal impedance ................................................................. 200 ⍀
Min. terminating impedance ..................................................... 1 k⍀
Max. output voltage................................................... 2 V (at 1 kHz)
Power supply ........................................ phantom 12 - 48 V (± 4 V)
or 1.5 V AA size battery
Supply current ..........................................................................2.2 mA
Battery life .................................................................... appx. 150 hrs
Dimensions ................................ 155 x Ø 22 mm (6.10˝ x Ø 0.87˝)
Resultant length* ......................................................94 mm (3.70˝)
Weight ...............................................................appx. 45 g (1.59 oz)
* Resultant length: this is the figure you need to add to the microphone head
length to give the overall length of the complete microphone.
Cable pictured is an accessory not supplied with the powering module
Features
䊏 Switchable bass roll-off filter protects against rumble, handling,
pop and wind noise
䊏 On/off switch with battery test
䊏 High output, low noise
䊏 Transformerless balanced output on 3-pin XLR connector
䊏 Delivery includes: 1 K6 powering module
1 MZQ 200 microphone clamp
1 AA battery
1 protective carrying case
Recommended Accessories
䊏 ME 62 microphone head, omni-directional
䊏 ME 64 microphone head, cardioid
䊏 ME 65 microphone head, super-cardioid
䊏 ME 66 microphone head, short gun
䊏 ME 67 microphone head, long gun
䊏 MKE 2-60 Gold-C clip-on microphone, omni-directional
䊏 ME 102/104/105 mini-modular system
䊏 MZS 6 shock mount
䊏 MZQ 6 quick release clamp
Cat. No. 003287
Cat. No. 003288
Product Variants
䊏 K6-C: as K6, but without accessories
䊏 K6-CL: as K6-C, but with lower sensitivity
Cat. No. 003861
Cat. No. 004032
Cat. No. 003281
Cat. No. 003282
Cat. No. 003283
Cat. No. 003284
Cat. No. 003285
Cat. No. 004733
Profile
Powering module for battery/phantom powering with
switchable roll-off filter, battery on/off switch with battery
test. Suitable for ME 62 – ME 67 microphone heads and -60
versions of MKE microphones. Transmission factor 0 dB at
1 kHz, nominal impedance 200 ⍀, min. terminating impedance 1 k⍀, max. output voltage 2 V (at 1 kHz), power supply:
phantom powering 12 – 48 V or 1.5 V (AA size) alkaline battery,
supply current 2.2 mA, battery life appx. 150 hrs,
dimensions: Ø 22 x 155 mm (Ø 0.87˝ x 6.10˝), resultant length
94 mm (3.70˝), weight appx. 45 g (1.59 oz).
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising