EWX147410W - User Manuals
EWX147410W
EN
Washer Dryer
User Manual
2
www.electrolux.com
CONTENTS
1. SAFETY INFORMATION....................................................................................3
2. SAFETY INSTRUCTIONS..................................................................................5
3. PRODUCT DESCRIPTION................................................................................ 7
4. CONTROL PANEL............................................................................................. 8
5. PROGRAMMES .............................................................................................. 10
6. CONSUMPTION VALUES................................................................................13
7. OPTIONS..........................................................................................................14
8. SETTINGS........................................................................................................15
9. BEFORE FIRST USE....................................................................................... 16
10. DAILY USE - WASHING ONLY......................................................................16
11. DAILY USE - DRYING ONLY......................................................................... 18
12. DAILY USE - WASHING & DRYING.............................................................. 19
13. HINTS AND TIPS........................................................................................... 20
14. CARE AND CLEANING..................................................................................22
15. TROUBLESHOOTING....................................................................................26
16. INSTALLATION.............................................................................................. 29
17. TECHNICAL DATA.........................................................................................37
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious and
stylish, it has been designed with you in mind. So whenever you use it, you can
be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com/webselfservice
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
1.
3
SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible for any injuries or damages that are the
result of incorrect installation or usage. Always keep the
instructions in a safe and accessible location for future
reference.
1.1 Children and vulnerable people safety
WARNING!
Risk of suffocation, injury or permanent
disability.
•
•
•
•
•
•
•
•
This appliance can be used by children aged 8 years
and above and by persons with reduced capabilities
provided that they have been given instruction and/or
supervision regarding the safe use of the appliance
and understand the potential hazards involved.
Do not let children play with the appliance.
Children under 3 years of age should be kept away
from the appliance unless continuously supervised.
Keep all packaging away from children and dispose of
it appropriately.
Keep detergents away from children.
Keep children and pets away from the appliance door
when it is open.
If the appliance has a child safety device, this should
be activated.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
•
•
Do not change the specification of this appliance.
The appliance shall be installed as a freestanding
product or below the kitchen worktop if space margins
permit.
4
www.electrolux.com
•
•
•
•
•
•
•
•
•
•
•
•
Do not install the appliance behind a lockable door, a
sliding door or a door with a hinge on the opposite
side, that would prevent the appliance door from being
fully opened.
Connect the mains plug to the mains socket only at
the end of the installation process. Make sure that the
mains plug is accessible after installation..
The ventilation opening in the base (if applicable) must
not be covered by a carpet, mat, or any floor covering.
Ensure good air ventilation in the located room to
avoid the back flow of gases into the room from
appliances burning gas or other fuels, including open
fires.
Exhaust air must not be discharged into a flue which is
used for exhausting fumes from any appliances
burning gas or other fuels.
The operating water pressure at the water entry point
from the outlet connection must be between 0.5 bar
(0.05 MPa) and 8 bar (0.8 MPa).
Do not exceed the maximum load of 7 kg (refer to the
"Programme chart" chapter).
The appliance must be connected to the water mains
using the new supplied hose sets, or other new hose
sets supplied by the Authorised Service Centre.
Old hose sets must not be reused.
If the mains power supply cable is damaged, it must
be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.
Wipe away lint or packaging debris that has
accumulated around the appliance.
Items that have been soiled with substances such as
vegetable or mineral oil, acetone, alcohol, petrol,
kerosene, spot removers, turpentine, waxes and wax
removers should be washed separately with an extra
amount of detergent before being dried in the washer
dryer.
ENGLISH
•
•
•
•
•
•
•
•
•
•
5
Do not use the appliance if items have been soiled
with industrial chemicals.
Do not dry unwashed items in the wash dryer.
Items such as foam rubber (latex foam), shower caps,
waterproof textiles, and rubber backed articles and
clothes, or pillows fitted with foam rubber pads should
not be dried in the washer dryer.
Fabric softeners, or similar products, should only be
used as specified by the product manufacturer’s
instructions.
Remove all objects from items that could be a source
of fire ignition such as lighters or matches.
Never stop the washer dryer before the end of the
drying cycle unless all items are quickly removed and
separated so that residual heat can dissipate.
The final part of the washer dryer cycle takes place
without heat (cool down cycle) to ensure that items
reach a temperature that will not cause damage to
them.
Do not use high pressure water sprays and/or steam
to clean the appliance.
Clean the appliance with a moist cloth. Use only
neutral, detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
2. SAFETY INSTRUCTIONS
2.1 Installation
•
•
•
•
•
•
Follow the installation instruction
supplied with the appliance.
Do not install or use the appliance
where the temperature can be less
than 0°C or where it is exposed to the
weather.
Always keep the appliance vertical
when being moved.
Make sure that there is air circulation
between the appliance and the floor.
•
•
Remove all the packaging and the
transit bolts.
The floor area where the appliance is
to be installed must be flat, stable,
heat resistant and clean.
Keep the transit bolts in a safe place.
If the appliance is to be moved in
future they must be reattached to lock
the drum to prevent internal damage.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
6
www.electrolux.com
•
•
•
•
Do not install or use a damaged
appliance.
Do not install the appliance where the
appliance door cannot be fully
opened.
Adjust the feet to have the necessary
space between the appliance and the
flooring.
When the appliance is in its
permanent position, check that it is
fully level with the aid of a spirit level.
If it is not, adjust the feet accordingly.
2.2 Electrical Connection
WARNING!
Risk of fire and electrical
shock.
•
•
•
•
•
•
The appliance must be earthed.
Always use a correctly installed
shockproof socket.
Do not use multi-plug adapters and
extension cables.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
Do not touch the mains cable or the
mains plug with wet hands.
This appliance complies with the
E.E.C. Directives.
2.3 Water Connection
•
•
•
Do not cause damage to the water
hoses.
Before connection to new pipes, pipes
not used for a long time, where repair
work has been carried out or new
devices fitted (water meters, etc.), let
the water flow until it is clean and
clear.
Ensure that there are no visible water
leaks during and after the first use of
the appliance.
2.4 Use
WARNING!
Risk of injury, electrical
shock, fire, burns or damage
to the appliance.
•
•
•
•
•
•
•
•
This appliance is for household use
only.
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
Do not touch the glass door while a
programme is in operation. The glass
can get hot.
Do not dry damaged (torn, frayed)
items that contain padding or fillings.
If laundry has been washed with a
stain remover, carry out an additional
rinse cycle before starting a drying
cycle.
Make sure that all metal objects are
removed from the laundry.
Only dry fabrics that are suitable to
dry in the washer dryer. Follow the
cleaning instruction on the item label.
Plastic items are not heat resistant.
– If a detergent ball is used, remove
it before starting a drying
programme.
– Do not use a detergent ball if
setting a non-stop programme.
WARNING!
Risk of injury or damage to
the appliance.
•
•
Do not sit or stand on the open door.
Do not dry dripping wet clothes in the
appliance.
2.5 Disposal
•
•
•
•
Disconnect the appliance from the
mains electrical and water supplies.
Cut off the mains electrical cable
close to the appliance and dispose of
it.
Remove the door catch to prevent
children or pets from becoming
trapped in the drum.
Dispose of the appliance in
accordance with local requirements
for the disposal of Waste Electrical
and Electronic Equipment (WEEE).
ENGLISH
3. PRODUCT DESCRIPTION
3.1 Appliance overview
1
2
7
8
9
3
4
5
6
1
2
3
4
5
6
7
8
9
10
Detergent dispenser
Control panel
Door handle
Rating plate
Drain pump filter
Feet for levelling the appliance
Water drain hose
Mains cable
Water inlet hose connection
Feet for levelling the appliance
3.2 How to activate the child
safety device
This device prevents children or pets
from being closed in the drum.
10
Turn the device clockwise, until the
groove is horizontal.
You cannot close the door.
To close the door, turn the device
anticlockwise until the groove is vertical.
7
8
www.electrolux.com
4. CONTROL PANEL
4.1 Control panel description
1
2
Drying
4
5 6
7
8
9 10
TimeManager
Cottons
Cottons
+Prewash
Synthetics
Cottons
Economy
Synthetics
90°
1400
60°
900
40°
30°
700
Temp.
Spin
Delicates
Wool
Extra Rinse Drying Time Delay Start
Start/Pause
Easy Iron
Handwash
Silk
Special
3
Spin
Rinses
Drain
1 Programme knob
2 Temperature button - Temperature
5 Drying time button - Drying time
6 Delay start button - Delay Start
7 Display
Cold position
8 Time Manager buttons
3 Spin reduction button - Spin
•
No spin function
•
Rinse hold function
9 Door locked indicator
10 Start/Pause button - Start/Pause
4 Extra rinse button - Extra Rinse
4.2 Display
A
B
C
D
The display shows the following information:
ENGLISH
A
9
Soil degree indicators:
Intensive
Normal
Daily
Light
Quick
Quick
Refresh
Super Refresh
When you select a programme, the display shows the indicator of the soil de‐
gree automatically proposed by the appliance.
B
C
Child safety lock (see chapter «Settings»).
Digit area:
•
•
•
•
•
•
Duration of the selected programme
After you select a programme, the duration is displayed in hours and mi‐
nutes (for example
). The duration is calculated automatically on the
basis of the maximum recommended load for each type of fabric. After the
programme start, the time remaining is updated every minute.
Selected drying time
After you select the drying programme, the drying time is displayed in mi‐
nutes or in hours and minutes. After the programme start, the time remaining
is updated every minute.
Delayed start
The selected delay appears for few seconds, then the display shows the du‐
ration of the selected programme again.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for
example
(see chapter «Troubleshooting»).
Incorrect option selection
If you set an option not compatible with the selected wash programme, the
message
shows up for a few seconds and the red indicator of button
Start/Pause starts flashing.
End of programme
When the programme has finished, the flashing value
The indicator of Start/Pause button goes out.
If the indicator
goes off, you can open the door.
is displayed.
10
www.electrolux.com
D
Washing programme phase indicators:
Wash
Rinses
Drain
Spin
Drying
By selecting the wash programme, the washing programme indicators corre‐
sponding to the various phases making up the programme are shown.
After you have pressed the Start/Pause button, only the indicator of the running
phase stays on.
5. PROGRAMMES
5.1 Programme Chart
Programme
Maximum
Temperature range load
Reduced
load1)
Maximum
spin speed
Programme description
(Type of load and soil level)
Washing programmes
Cottons
90°C -
(Cold)
+ Prewash
Cottons + Prewash
90°C -
(Cold)
Synthetics
60°C -
(Cold)
Delicates
40°C -
(Cold)
Easy Iron
60°C -
(Cold)
7 kg
3.5 kg
1400 rpm
White cotton and coloured cotton. Normal soil
and light soil.
7 kg
3.5 kg
1400 rpm
White cotton and coloured cotton. Heavy soil
and normal soil.
3 kg
1.5 kg
900 rpm
Synthetic items or mixed fabric items. Normal
soil.
3 kg
1.5 kg
700 rpm
Delicate fabrics such as acrylics, viscose,
polyester items. Normal soil.
1.5 kg
900 rpm
Synthetic items requiring a gentle wash. Nor‐
mal and light soil.2)
ENGLISH
Programme
Maximum
Temperature range load
Reduced
load1)
Maximum
spin speed
Spin
11
Programme description
(Type of load and soil level)
7 kg
1400 rpm
To spin the laundry and to drain the water in the
drum. All fabrics, except woollens and deli‐
cate fabrics.
7 kg
To drain the water in the drum. All fabrics.
7 kg
1400 rpm
To rinse and spin the laundry. All fabrics, ex‐
cept woollens and very delicate fabrics. Reduce
the spin speed accordingly to the type of laun‐
dry.
1 kg
700 rpm
Special programme for silk and mixed synthet‐
ic items.
2 kg
900 rpm
Machine washable wool, hand washable
wool and delicate fabrics with «hand washing»
care symbol.3)
2 kg
900 rpm
Machine washable wool, hand washable
wool and delicate fabrics with «hand washing»
care symbol.3)
7 kg
1400 rpm
White cotton and fast-coloured cotton. Nor‐
mal soil. The energy consumption decreases
and the time of the washing programme is ex‐
tended.
This programme at 60 °C is the reference pro‐
gramme for energy label data, in compliance
with UAE. S 5010 2:2013.
2 kg
Drying programme for synthetic items.
Drain
Rinses
Silk
30°C
Handwash
40°C -
(Cold)
Wool
40°C -
(Cold)
Cottons Economy
90°C - 40°C
Drying pro‐
grammes
Drying -Synthetics
12
www.electrolux.com
Programme
Maximum
Temperature range load
Reduced
load1)
Maximum
spin speed
4 kg
Programme description
(Type of load and soil level)
Drying programme for cotton items.
Cottons
1) If you select the Super Quick, Refresh or Super Refresh option by pressing buttons Time
Manager, we recommend that you reduce the maximum load as indicated in the pro‐
grammes for cottons, synthetics and delicates. Full loading is possible however with some‐
what reduced cleaning results.
2) To reduce creasing, this cycle regulates the water temperature and performs a soft wash
and spin phase. The appliance adds some rinses.
3) During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the
drum doesn't rotate or doesn't rotate properly, but this is normal for this programme.
Programme options compatibility
Programme
Cottons
■
■
■
■
■
Cottons + Prewash
■
■
■
■
■
Synthetics
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Delicates
Easy Iron
■
Spin1)
■
Drain
Rinses
■
Silk
Handwash
■
■
■
Wool
■
■
■
Cottons Economy
■
■
■
■
1) Set the spin speed. Make sure it is suitable for the type of fabric being washed. If you set
the No Spin option then only the drain phase is available.
ENGLISH
13
5.2 Programmes for timed drying
Dryness Level
Type of fabric
Load
(kg)
Extra Dry
For towelling materi‐
als
Cottons and Linen
(bathrobes, bath towels,
etc)
Spin
speed
(rpm)
Suggested
duration
(mins)
4
1400
215 - 220
3
1400
160 - 180
1.5
1400
95 - 105
4
1400
205 - 210
3
1400
150 - 170
1.5
1400
85 - 95
Cupboard Dry1)
For items to be stor‐
ed
Cottons and Linen
(bathrobes, bath towels,
etc)
Cupboard Dry
For items to be stor‐
ed
Synthetics and mixed
fabrics
(jumpers, blouses, under‐
wear, household linen)
2
900
90 - 100
1
900
55 - 65
Iron Dry
Suitable for ironing
Cottons and Linen
(sheets, tablecloths, shirts,
etc)
4
1400
140 - 150
3
1400
90 - 100
1.5
1400
60 - 70
1) In compliance with UAE.S 5010 2:2013, the cotton reference programme for the data
entered in the Energy Label must be tested dividing the maximum washing load by two
equal parts and drying with DRYING TIME each of them.
6. CONSUMPTION VALUES
The data in this table are approximate. Different variables can affect the
data: the quantity and type of laundry, the water and ambient tempera‐
ture.
Programmes
Load
(kg)
Energy
Water con‐
con‐
sumption
sumption (litre)
(kWh)
Approximate pro‐
gramme duration
(minutes)
Cottons 60°C
7
1.35
67
150
Cottons Economy 60°C1)
7
1.05
57
219
Cottons 40°C
7
0.85
67
140
Synthetics 40°C
3
0.55
42
90
Delicates 40°C
3
0.55
63
65
Wool/Handwash 30°C
2
0.25
55
60
1) This programme at 60 °C is the reference programme for energy label data, in compli‐
ance with UAE. S 5010 2:2013.
14
www.electrolux.com
7. OPTIONS
7.1 Programme knob
7.4 Extra Rinse
This knob allows you to select a
programme, to reset a programme and/or
to switch the appliance on/off .
Press this button to add some rinses to
the washing programme.
The knob can be turned either clockwise
or counterclockwise.
At the end of the programme, turn the
knob to position On/Off to deactivate the
appliance.
7.2 Temperature
Press this button to increase or decrease
the default washing temperature.
If you set the position
, the appliance
performs the washing with cold water.
The indicator of the set temperature
illuminates.
7.3 Spin
Press this button to increase or decrease
the default spin speed or to select the
additional spin options.
The indicator of the set speed
illuminates.
Additional spin options:
NO SPIN
•
•
•
Set this option to remove all spin
phases.
Set it for extremely delicate fabrics.
The rinse phase uses more water for
some washing programmes.
RINSE HOLD
•
•
•
Set this option to prevent the laundry
from creases.
The washing programme stops with
the water in the drum. The drum turns
regularly to prevent the laundry
creases.
The door stays locked. You must
drain the water before opening the
door.
To drain the water refer to
‘At the end of the
programme’.
Use this option for persons allergic to
detergents and in areas where the water
is soft.
The related indicator comes on.
7.5 Drying time
Press this button to set the time for the
fabrics you have to dry. The display
shows the set value.
For Cottons you can select a drying time
from 10 minutes to 250 minutes (4.10 in
the digit area).
For Synthetics you can select a drying
time from 10 minutes to 130 minutes
(2.10 in the digit area).
Each time you press the button, the time
value increases by 5 minutes.
You cannot set all time
values for different types of
fabrics.
7.6 Delay Start
Press this button to delay the start of the
programme by 30 min - 60 min - 90 min,
2 hours and then by 1 hour up to a
maximum of 20 hour.
The button indicator illuminates. The
display shows the selected delay value.
7.7 Time Manager
Press this button to increase or decrease
the programme duration proposed by the
appliance.
The indicator of the chosen degree will
appear on the display.
This option is available only with Cottons,
Synthetics and Delicate programmes.
ENGLISH
Washing
cycle
Soil level
Heavy soiled
items
Normal
Normal soiled
items
Daily
Daily soiled
items
Light
Slightly soiled
items
Quick
Very slightly
soiled items
Items used or
worn for a
short time
Super
Quick1)
The availability of the soil
degree changes according
to the type of fabric and
temperature.
Type of fab‐
rics
Intensive
Refresh 1)
2)
To refresh
items only
Super Re‐
fresh 1)
2)
To refresh
few items on‐
ly
15
7.8 Door locked indicator
The indicator
illuminates when the
programme starts and indicates when
the door can be opened:
• The indicator is on: the door cannot
be opened.
The appliance in working or has
stopped with water left in the tub.
•
The indicator flashes: the door is
opening in some minutes.
The programme is finished or the
water has been emptied out.
•
The indicator is off: the door can be
opened.
7.9 Start/Pause
Press this button to start or to interrupt
the selected programme.
1) It is recommended to reduce the load
sizes.
2) When you select this option the relevant
indicator appears just for a while and then it
disappears immediately.
8. SETTINGS
8.1 Acoustic signals
•
The acoustic signals sound when:
•
•
The programme is completed.
The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press button Extra Rinse and
button Drying Time at the same time for
about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
8.2 Child Lock function
With this function you can leave the
appliance unattended and prevent that
the children play with the control panel.
To activate/deactivate this function,
press Delay Start and Drying Time at
the same time until the indicator
comes on/goes off in the display.
You can activate this option in two ways:
•
•
After you press Start/Pause: the
options and the programme knob are
locked.
Before you press Start/Pause : the
appliance cannot start.
16
www.electrolux.com
9. BEFORE FIRST USE
1. Put 2 litre of water in the detergent
compartment for washing phase.
This activates the drain system.
2. Put a small quantity of detergent in
the compartment for washing phase.
3. Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.
10. DAILY USE - WASHING ONLY
10.1 Loading the laundry
1. Open the appliance door
2. Put the laundry in the drum, one item
at a time.
3. Shake the items before you put them
in the appliance.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
MAX
10.3 Detergent compartments
CAUTION!
Use only specified
detergents for washing
machine.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
10.2 Using detergent and
additives
1. Measure out the detergent and the
fabric conditioner.
2. Put the detergent and the fabric
conditioner into the compartments.
3. Carefully close the detergent drawer
Always obey the instructions
that you find on the
packaging of the detergent
products.
Detergent compartment for pre‐
wash phase.
Detergent compartment for
washing phase.
Compartment for liquid addi‐
tives (fabric conditioner,
starch).
10.4 Switching the appliance on
and setting a programme
1. Turn the programme knob to switch
the appliance on and to set the
required programme:
ENGLISH
•
The display shows the default
level of Time Manager, the
programme duration and the
programme phases indicators of
the selected programme.
• The indicator of Start/Pause
button flashes in green.
2. If necessary, change the
temperature, the spin speed, the
cycle duration or add available
options. When you activate an
option, the related indicator comes
on.
•
The Delay Start can
not be selected with
the draining
programme.
10.6 Starting a programme
without the delay start
shows the message
.
The Start/Pause button
indicator flashes in red 3
times.
Press the Start/Pause button.
• The green Start/Pause indicator
stops flashing and stays on.
• The programme starts, the door
1. Press the Delay Start button
repeatedly until the display shows the
delay you want to set. The related
indicator illuminates.
The selected delay time value (up to 20
hours) will appear on the display a few
seconds, then the duration of the
programme will appear again.
2. Press the Start/Pause button.
• The door is locked and the
•
the display shows .
Press the Start/Pause button
again to start the programme
immediately.
If you set something not
compatible with the selected
programme, the display
10.5 Starting a programme with
the delay start
is on.
indicator
The appliance starts the
countdown.
When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the Delay Start
before you press the Start/
Pause button. After pressing
the Start/Pause button you
can only cancel the Delay
Start.
To cancel the Delay Start:
17
a. Press the Start/Pause button to
set the appliance to pause. The
related indicator flashes.
b. Press the Delay Start button until
•
locks, the indicator
illuminates
and stays on.
The programme time on the
display decreases with steps of
one minute.
The drain pump can operate
for a short time at the
beginning of the washing
cycle.
10.7 Interrupting a programme
and changing the options
You can change only some options
before the programme carries them out.
1. Press the Start/Pause button to
interrupt the running programme.
The related indicator flashes.
2. Change the options (if you wish to
change the Time Manager option,
you must cancel the running
programme and make your selection
again).
3. Press the Start/Pause button again.
The programme continues.
10.8 Cancelling a running
programme
1. Turn the programme knob to On/Off
position to cancel the programme.
The appliance is deactivated.
18
www.electrolux.com
2. Now, you can set a new washing
programme and the available
options.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment; if
not, fill the detergent again.
10.9 Opening the door
While a programme is running or during
the Delay Start, the appliance door is
locked. The indicator
is on.
CAUTION!
If the temperature and level
of the water in the drum are
too high and the drum still
rotates, you cannot open the
door.
To open the door during the first minutes
of the cycle or when the Delay Start
operates:
1. Press the Start/Pause button to
pause the appliance.
2. Wait until the indicator
goes off.
3. You can open the door.
4. Close the door and press the Start/
Pause button again.
The programme (or the Delay Start)
continues.
10.10 At the end of the
programme
•
The appliance stops automatically.
Some acoustic signals sound (if they
are activated).
•
In the display the value
come
on. The Start/Pause indicator goes
off.
•
•
•
•
The washing programme is
completed, but there is water in the
drum:
• The drum turns regularly to prevent
the creases in the laundry.
•
•
The door lock indicator
is on. The
door stays locked.
You must drain the water to open the
door.
To drain the water:
1. Turn the programme knob to On/Off
position an then select a spinning or
draining programme.
2. Press the Start/Pause button. If
necessary, decrease the spin speed.
The appliance spins and drains or only
drains.
3. When the programme is completed
goes off, you
and the indicator
can open the door.
4. Turn the programme knob to On/Off
position to deactivate the appliance.
10.11 Stand-by
Once the programme has finished, after
a few minutes the energy saving system
will be enabled.
The brightness of the display is reduced.
By pressing any button the appliance will
come out of the energy saving status.
11. DAILY USE - DRYING ONLY
WARNING!
Refer to Safety chapters.
When the door lock indicator
goes
off, you can open the door.
Remove the laundry from the
appliance. Make sure that the drum is
empty. Close the water tap.
Turn the programme knob to On/Off
position to deactivate the appliance.
Keep the door ajar, to prevent the
mildew and odours.
ENGLISH
11.1 Timed drying
WARNING!
Make sure that the water
tap is open.
The recommended load size is 4 kg for
cottons and 2 kg for synthetic items.
1. Load the laundry one item at a time.
2. Turn the programme knob in the
Drying sector to the programme
suitable to the items to dry (cotton or
synthetic).
To have a good drying
performance do not exceed
the maximum drying loads
recommended in the user
manual.
Do not set a spin speed
lower than the automatic
speed proposed by the
selected programme.
3. Press the Drying time button to set
the desired drying time (see the
« Programmes for timed drying»
paragraph). Every time you press this
button the drying time increases by 5
minutes.
On the display the
programme time will
automatically increase by
some minutes. This is quite
normal.
4. Press Start/Pause button to start the
programme.
The display shows the drying indicator
and updates regularly the drying time
value.
The indicator
locked.
illuminates. The door is
If you set only 10 minutes of
drying phase, the appliance
performs only a cooling
phase.
If the laundry is not sufficiently dry, set a
short drying time again.
11.2 End of the drying
programme
The appliance stops automatically.
•
•
•
The acoustic signals sound (if they
are active). In the display the value
comes on.
The Start/Pause indicator goes off.
The last minutes of the drying cycle
the appliance performs a cooling and
anti-crease phase. Through this time
the door is still locked. The display
.
keeps showing the value
If you wish to open the door before or
during the anti-crease phase or to
interrupt it, press any button or turn
the programme selector dial to any
programme position.
When the door locked indicator
off, you can open the door.
goes
1. Turn the selector dial to On/Off
position to deactivate the appliance.
2. Remove the laundry from the
appliance.
Make sure that the drum is empty.
3. Keep the door ajar, to prevent mildew
and odours.
4. Close the water tap.
12. DAILY USE - WASHING & DRYING
WARNING!
Refer to Safety chapters.
12.1 Drying setting
WARNING!
Make sure that the water
tap is open.
19
The recommended load size is 4 kg for
cottons and 2 kg for synthetic items.
CAUTION!
Do not use a dosing device/
ball when carrying out a
washing and drying
programme.
20
www.electrolux.com
12.2 Non-Stop programme Washing and Timed Drying
1. Load the laundry one item at a time.
Turn the programme knob to the set
washing programme.
2. Add detergent and fabric softener.
3. Press the relevant buttons to select
the required options.
To have a good drying
performance do not exceed
the maximum drying loads
recommended in the user
manual. Do not set a spin
speed lower than the
automatic speed proposed
by the selected programme.
4. Press Tempo di asciugatura button to
set the drying time. Every time you
press this button the drying time
increases by 5 minutes.
The display shows the whole duration of
the washing and the selected drying
cycles.
On the display the
programme time will
automatically increase by
some minutes. This is quite
normal.
The display shows the drying indicator
and updates regularly the drying time
value.
5. Press Start/Pause button to start the
programme.
The indicator
locked.
12.3 End of the programme
The appliance stops automatically. The
acoustic signals sound (if they are
active).
For more information see 'At the end of
the drying programme " of the previous
chapter.
1. Turn the programme knob to the to
On/Off position to deactivate the
appliance.
2. Remove the laundry from the
appliance.
Make sure that the drum is empty.
3. Keep the door ajar, to prevent mildew
and odours.
4. Close the water tap.
12.4 Fluff in the fabrics
During the washing and/or drying phase,
some types of fabric, (sponge, wool,
sweatshirt) could release fluff.
The released fluff could stick to the
fabrics during the next cycle.
To prevent the fluff in your laundry, we
recommend that you:
•
•
•
•
illuminates. The door is
Do not wash dark fabrics after you
have washed and dried light coloured
fabrics (new sponge, wool,
sweatshirt ) and the contrary.
Line dry this type of fabrics at open air
when they are washed the first time.
Clean the drain filter.
After the drying phase, clean the
empty drum, the gasket and the door
with a wet cloth.
If you set only 10 minutes as
drying phase, the appliance
performs only a cooling
phase.
13. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
13.1 The laundry load
•
Divide the laundry in: white, coloured,
synthetics, delicates and wool.
•
•
•
Obey the washing instructions that
are on the laundry care labels.
Do not wash white and coloured items
together.
Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first times.
ENGLISH
•
•
•
•
•
•
•
•
Button up pillowcases, close zippers,
hooks and poppers. Tie up belts.
Empty the pockets and unfold the
items.
Turn multilayered fabrics, wool and
items with painted illustrations inside
out.
Remove hard stains.
Wash heavy soil stains with a special
detergent.
Be careful with the curtains. Remove
the hooks or put the curtains in a
washing bag or pillowcase.
Do not wash laundry without hems or
with cuts. Use a washing bag to wash
small and/or delicate items (e.g.
underwired bras, belts, tights, etc. ).
A very small load can cause balance
problems with the spin phase. If this
occurs, adjust manually the items in
the tub and start the spin phase
again.
13.2 Stubborn stains
For some stains, water and detergent is
not sufficient.
We recommend that you pre-treat these
stains before you put the items in the
appliance.
•
•
21
Use the correct products for the type
and colour of the fabric, the
programme temperature and the level
of soil.
If your appliance does not have the
detergent dispenser with the flap
device, add the liquid detergents with
a dosing ball (supplied by the
detergent's manufacturer).
13.4 Ecological hints
•
•
•
•
Set a programme without the prewash
phase to wash laundry with normal
soil.
Always start a washing programme
with the maximum load of laundry
allowed.
If necessary, use a stain remover
when you set a programme with a low
temperature.
To use the correct quantity of
detergent, check the water hardness
of your domestic system. Refer to
"Water hardness".
13.5 Water hardness
Special stain removers are available.
Use the special stain remover that is
applicable to the type of stain and fabric.
If the water hardness in your area is high
or moderate, we recommend that you
use a water softener for washing
machines. In areas where the water
hardness is soft it is not necessary to use
a water softener.
13.3 Detergents and additives
To know the water hardness in your
area, contact your local water authority.
•
•
•
•
Only use detergents and additives
specially made for washing machines:
– powder detergents for all types of
fabric,
– powder detergents for delicate
fabrics (40 °C max) and woollens,
– liquid detergents, preferably for
low temperature wash
programmes (60 °C max) for all
types of fabric, or special for
woollens only.
Do not mix different types of
detergents.
To help the environment, do not use
more than the correct quantity of
detergent.
Obey the instructions that you find on
the on packaging of these products.
Use the correct quantity of the water
softener. Obey the instructions that you
find on the packaging of the product.
13.6 Drying hints
Prepare the drying cycle
• Open the water tap.
• Check if the drain hose is connected
properly. Refer to installation chapter
for more information.
• For the maximum laundry load of the
drying programmes, refer to the
drying programmes table.
22
www.electrolux.com
13.7 Items not suitable for
drying
Do not set a drying programme for
this laundry:
• Very delicate items.
• Synthetic curtains.
• Pieces of clothing with metal inserts.
• Nylon stockings.
• Quilts.
• Bed covers.
• Duvets.
• Anoraks.
• Sleeping bags.
• Fabrics with residue of hair sprays,
nail solvents or similar.
• Garments with foam-rubber or
materials similar to foam-rubber.
13.8 Garment labels
When you dry the laundry, obey the
indications on the labels of the
manufacturers:
•
= The item can be tumble dried
•
= The drying cycle is at high
temperature
•
= The drying cycle is at reduced
temperature
•
= The item can not be tumble
dried.
•
•
•
•
speed of the last spin
dryness level
type of laundry
weight of the load
13.10 Additional drying
If, at the end of the drying programme,
the laundry is still damp, set a short
drying cycle again.
WARNING!
To avoid creasing and
shrinkage do not overdry
the laundry.
13.11 General Tips
Refer to the «Drying programmes» table
to find the average drying times.
Experience will help you to dry the
laundry better. Take note of the duration
of the cycles done before.
To avoid the static charge at the end of
the drying cycle:
1. Use fabric conditioner in the washing
cycle.
2. Use special fabric conditioner for
tumble dryers.
When the drying programme is
completed remove the laundry promptly.
13.9 Drying cycle duration
The drying time can change depending
on:
14. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
14.1 External cleaning
Clean the appliance with soap and warm
water only. Fully dry all the surfaces.
CAUTION!
Do not use alcohol, solvents
or chemical products.
14.2 Descaling
If the water hardness in your area is high
or moderate, we recommend that you
use a water descaling product for
washing machines.
Regularly examine the drum to prevent
limescale and rust particles.
To remove rust particles use only special
products for washing machines. Do this
separately from the laundry wash.
ENGLISH
23
14.4 Door seal
Always obey the instructions
that you find on the
packaging of the product.
14.3 Maintenance wash
With the low temperature programmes it
is possible that some detergent stays in
the drum. Perform a maintenance wash
regularly. To do this:
•
•
Regularly examine the seal and remove
all objects from the inner part.
Remove all laundry from the drum.
Select the cotton programme with the
highest temperature with a small
quantity of detergent.
14.5 Cleaning the detergent dispenser
1.
2.
1
MAX
MAX
2
3.
4.
MAX
14.6 Cleaning the drain filter
The pump should be inspected regularly
and particularly if:
•
•
The appliance does not empty and/or
spin.
The appliance makes an unusual
noise during draining due to objects
•
such as safety pins, coins etc.
blocking the pump.
A problem with water draining is
detected (see chapter
“Troubleshooting” for more details).
24
www.electrolux.com
WARNING!
Before unscrewing the pump
cover, switch the appliance
off and remove the mains
plug from the socket.
1. Unplug the appliance.
2. If it is necessary, wait until the water
has cooled down
To clean the drain filter:
WARNING!
When the appliance is in use
and depending on the
programme selected there
can be hot water in the filter.
Never remove the filter cover
during a wash cycle, always
wait until the appliance has
finished the cycle, and is
empty. When refitting the
filter cover, ensure it is
securely re-tightened so as
to stop leaks and young
children being able to
remove it.
A
B
3. Place a container close to the pump to
collect any spillage.
A = Cover filter.
B = Emergency emptying hose.
4. Release the emergency emptying hose,
place it in the container and remove its cap
cover.
1
2
5. When no more water comes out, unscrew
the filter cover by turning it anti-clockwise and
remove the filter. Use pliers, if necessary.
Always keep a rag nearby to dry up any water
spillages when removing the cover. Clean the
filter under a tap, to remove any traces of
fluff.
ENGLISH
25
6. Remove foreign bodies and fluff from the
filter seat and from the filter impeller.
7. Check carefully whether the pump impeller
rotates (it rotates jerkily). If it doesn’t rotate,
please contact your Service Centre.
2
8. Put the cap back on the emergency
emptying hose and place the latter back in its
seat. Replace the filter into the pump by
inserting it correctly into the special guides.
Screw the filter cover firmly by turning it
clockwise.
1
14.7 Cleaning the inlet hose and the valve filter
1.
2.
1
2
3
26
www.electrolux.com
3.
4.
45°
20°
14.8 Frost precautions
14.9 Emergency emptying out
If the appliance is installed in an area
where the temperature can be less than
0° C, remove the remaining water from
the inlet hose and the drain pump.
If the appliance does not drain the water,
proceed as follows:
1. Disconnect the mains plug from the
mains socket.
2. Close the water tap.
3. Place the end of the emergency
emptying hose and that of the inlet
hose in a bowl placed on the floor
and let water flow out of the hoses.
4. Set the Drain programme and let it
operate until the end of the cycle.
5. Turn the programme knob to On/Off
to disconnect the appliance from the
power supply.
6. Screw the water inlet hose back on
and re-fit the emergency emptying
hose after having put the cap on
again.
WARNING!
Make sure that the
temperature is more than 0
°C before you use the
appliance again.
The manufacturer is not
responsible for damages
caused by low temperatures.
1. Disconnect the mains plug from the
mains socket.
2. Close the water tap.
3. If necessary, wait until the water has
cooled down.
4. Place a bowl on the floor and put the
end of the emergency emptying hose
into the bowl. Remove its cap.
The water should drain by gravity into the
bowl.
5. When the bowl is full, put the cap
back on the emergency hose.
6. Empty the bowl. Repeat the
procedure until water stops flowing
out.
7. Clean the pump if necessary as
previously described.
8. Replace the emergency emptying
hose in its seat after having plugged
it.
9. Screw the water inlet hose back on.
15. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
15.1 Introduction
The appliance does not start or it stops
during operation.
ENGLISH
First try to find a solution to the problem
(refer to the table). If the problem
persists, contact the Authorised Service
Centre.
With some problems, the acoustic
signals operate and the display shows
an alarm code:
•
- The appliance does not fill with
water properly.
•
- The appliance does not drain
the water.
•
- The appliance door is open or
not closed correctly. Please check the
door!
27
•
- The mains supply is unstable.
Wait until the mains supply is stable.
•
- No communication between
electronic elements of the appliance.
Switch off and switch on again.
WARNING!
Deactivate the appliance
before you do the checks.
15.2 Possible failures
Problem
Possible cause/solution
The programme does
not start.
Make sure that the mains plug is connected to the mains
socket.
Make sure that the appliance door is closed.
Make sure that there is not a damaged fuse in the fuse box.
Make sure that the Start/Pause has been pressed.
If the delay start is set, cancel the setting or wait for the end
of countdown.
Deactivate the Child Lock function if it is on (if available).
The appliance does not Make sure that the water tap is open.
fill with water properly.
Make sure that the pressure of the water supply is not too
low. For this information, contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filter of the inlet hose and the filter of the
valve are not clogged. Refer to “Care and cleaning”.
Make sure that the inlet hose has no kinks or bends.
Make sure that the connection of the water inlet hose is cor‐
rect.
Make sure that the drain hose is in the correct position. The
hose may be too low.
28
www.electrolux.com
Problem
Possible cause/solution
The appliance does not Make sure that the sink spigot is not clogged.
drain the water.
Make sure that the drain hose has no kinks or bends.
Make sure that the drain filter is not clogged. Clean the fil‐
ter, if necessary. Refer to 'Care and cleaning'.
Make sure that the connection of the drain hose is correct.
Set the drain programme if you set a programme without
drain phase.
Set the drain programme if you set an option which ends
with water in the tub.
The spin phase does
Set the spin programme.
not operate or the
washing cycle lasts lon‐ Make sure that the drain filter is not clogged. Clean the fil‐
ter, if necessary. Refer to 'Care and cleaning'.
ger than usually.
There is water on the
floor.
Adjust manually the items in the tub and start the spin
phase again. This problem may be caused by balance
problems.
Make sure that the couplings of the water hoses are tight
and there is not water leakages.
Make sure that the drain hose have no damages.
Make sure you use the correct detergent and the correct
quantity of it.
Make sure you have replaced the emergency emptying cap
into the filter
Make sure you have properly screwed the filter in after
cleaning.
You cannot open the
appliance door.
Make sure that the washing programme is finished.
The appliance makes
an unusual noise.
Make sure the levelling of the appliance is correct. Refer to
'Installation'.
Set the drain or the spin programme if there is water in the
drum.
Make sure that the packaging and/or the transit bolts are
removed. Refer to 'Installation'.
Add more laundry in the drum. The load may be too small.
ENGLISH
29
Problem
Possible cause/solution
The washing results
are not satisfactory.
Increase the detergent quantity or use a different detergent.
Use special products to remove the stubborn stains before
you wash the laundry.
Make sure that you set the correct temperature.
Decrease the laundry load.
The machine does not
dry or does not dry
properly:
Make sure that you have set a suitable drying programme
for your laundry.
Make sure that you set the correct the drying time or dry‐
ness degree.
Make sure that the water tap is not turned on.
Make sure the drain filter is not clogged.
Make sure you have not overloaded the appliance.
The laundry is full of
different coloured fluff:
The fabrics washed in the previous cycle released fluff of a
different colour.
Clean the clothes with a fluff remover
The drying phase helps to eliminate some fluff.
In case of an excessive
amount of fluff in the
drum, refer to section
«FLUFF IN THE FAB‐
RICS».
•
•
•
•
•
Thoroughly clean the empty drum, the gasket and the
door with a wet rag.
Perform a rinse cycle.
Put a wool or piled fabric rag inside the drum.
Perform a drying cycle of 10 minutes.
Remove the old wool cloth.
Now you can wash other garments.
After the check, activate the appliance.
The programme continues from the point
of interruption.
If the problem occurs again, contact the
Authorised Service Centre.
If the display shows other alarm codes.
Deactivate and activate the appliance. If
the problem continues, contact the
Service.
16. INSTALLATION
16.1 Unpacking
WARNING!
Remove all the packaging and the transit bolts before installing the
appliance.
30
www.electrolux.com
Use the gloves. Remove the external film. If
necessary, use a cutter.
Remove the cardboard top. Remove the
polystyrene packaging materials.
Remove the internal film.
Open the door. Remove the polystyrene
piece from the door seal and all the items
from the drum.
ENGLISH
31
Put one of the polystyrene packaging
elements on the floor behind the appliance.
Carefully put down the appliance with the rear
side on it. Make sure not to damage the
hoses.
Remove the polystyrene protection from the
bottom. Pull up the appliance in vertical
position.
1
2
Remove the polystyrene block fitted on the
door seal (if present). Pull out all items from
the drum.
Remove the power supply cable and the drain
hose from the hose holders.
32
www.electrolux.com
Remove the three bolts. Use the key supplied
with the appliance. Pull out the plastic
spacers.
Put the plastic caps in the holes. You can find
these caps in the user manual bag.
We recommend that you keep the packaging and the transit bolts for any
movements of the appliance.
16.2 Positioning and levelling
•
•
•
•
Install the appliance on a flat hard floor.
Make sure that air circulation around the
appliance is not impeded by carpets, rugs
etc.
Level the appliance by raising or lowering
the feet.
The feet may be tight to adjust as they
incorporate a self locking nut, but the
appliance MUST be level and stable. If
necessary, check the setting with a spirit
level. Any necessary adjustment can be
made with a spanner. Accurate levelling
prevents vibration, noise and
displacement of the appliance during
operation.
ENGLISH
•
After having levelled the appliance, tighten
the lock nuts.
WARNING!
Never place cardboard, wood or similar materials under the appliance to
compensate for any unevenness in the floor.
16.3 The inlet hose
•
•
45
20
Connect the hose to the back appliance.
Turn the inlet hose only left or right.
Loose the ring nut to set it in the correct
position.
O
O
•
Connect the water inlet hose to the cold
water tap with 3/4 thread.
CAUTION!
Make sure that there are no
leaks from the couplings.
Do not use an extension hose if the inlet hose is too short. Contact the
service centre for the replacement of the inlet hose.
16.4 Water drainage
There are different procedures to connect the drain hose:
With the plastic hose guide.
33
34
www.electrolux.com
•
Make a U shape with the drain hose.
On the edge of a sink
• Make sure that the plastic guide cannot
move when the appliance drains. Attach
the guide to the water tap or the wall.
To a stand pipe with vent-hole
• Directly into a drain pipe at a height of not
less than 60 cm (23.6”) and not more than
100 cm (39.3”). Refer to the illustration.
• The end of the drain hose must always be
ventilated , i.e. the inner diameter of the
drain pipe (min. 38 mm - min. 1.5”) must
be larger than the external diameter of the
drain hose.
Drain hose end
• If the end of the drain hose looks like this
(see the picture), you can push it directly
into the stand pipe.
Without the plastic hose guide.
ENGLISH
35
To a sink spigot
• Refer to the illustration. Put the drain hose
in the spigot and tighten it with a clip.
• Make sure that the drain hose makes a
loop to prevent particles going into the
appliance from the sink.
To a wall-pipe
• Directly to a built-in drain pipe in the room
wall and tighten it with a clip.
You can extend the drain hose to maximum 400 cm. Contact the service
centre for the other drain hose and the extension.
16.5 Building in
This appliance has been designed to be built
into the kitchen furniture. The recess should
have the dimensions shown in this picture.
600 mm
min.
596 mm
560 mm
555 mm
min.
820 mm
818 mm
75 mm
60 mm
170 mm
100 mm
16.6 Preparation and assembly of the door
The appliance is originally pre set for the
assembly of a door opening from right to left.
36
www.electrolux.com
Door
The dimensions of the door should be:
• width 595 - 598 mm
16-22 mm
X
Ø 35 mm
416
mm
•
thickness 16-22 mm
•
the height X depends on the height of the
adjacent furniture's base.
22±1,5 mm
14 mm
595-598 mm
1
Hinges
To mount the hinges it is necessary to drill
two holes (dia. 35 mm, depth12.5-14 mm
depending on the depth of door furniture) on
the inner side of the door.
The distance between the hole fixing centres
must be 416 mm. The distance from upper
edge of the door to the centre of the hole
depends on the adjacent furniture's
dimensions.
The hinges will be fixed to the door by means
of screws for wood 1 and 2 supplied with the
appliance.
2
Mounting the door
WARNING!
Do not remove the screw B.
Fix the hinges to the appliance by means of
the M5x15 screws.
The hinges can be adjusted to compensate
for possible uneven thickness of the door.
To align the door perfectly it is necessary to
loosen the screw, adjust the door and tighten
the screw A again.
A
B
Counter-magnet
A
B
C
WARNING!
Do not remove the screw B.
The appliance is pre set for a magnetic door
closure. To position the closure correctly, it is
necessary to screw the counter-magnet A
(steel disk + rubber ring) into the inner side of
the door.
Its position must correspond to the magnet B
on the appliance.
ENGLISH
37
WARNING!
Do not remove the screw B.
D
If the door has to be opened from left to right,
invert the position of the plates E, the magnet
D and the plate C. Mount the counter-magnet
D and the hinges A as previously described.
A
C
E
B
17. TECHNICAL DATA
Dimension
Width/ Height/ Depth/
Total depth
596 mm/ 820 mm/ 544 mm/ 560
mm
Electrical connection
Voltage
Overall power
Fuse
Frequency
220-240 V
2050 W
13 A
50 Hz
Level of protection against ingress of solid parti‐ IPX4
cles and moisture ensured by the protective cov‐
er, except where the low voltage equipment has
no protection against moisture
Water supply pressure Minimum
Maximum
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Maximum wash load
Cotton
7 kg
Maximum dry load
Cotton
Synthetics
4 kg
2 kg
Spin Speed
Maximum
1400 rpm
18. ENVIRONMENTAL CONCERNS
Recycle the materials with the symbol
. Put the packaging in applicable
containers to recycle it. Help protect the
environment and human health and to
recycle waste of electrical and electronic
appliances. Do not dispose appliances
*
marked with the symbol with the
household waste. Return the product to
your local recycling facility or contact
your municipal office.
38
www.electrolux.com
ENGLISH
39
132938501-A-282016
www.electrolux.com/shop
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising