For Models: AV-56P585 AV-56P575 AV

For Models: AV-56P585 AV-56P575 AV
For Models:
AV-56P585
AV-56P575
AV-48P575
illustration
important
of AV-56P575
and
RM-C1257G
Note:
In the Spaces be!ow, enter the model and seiJal nurnber Of your television (located
at the rear of the television cabinet). Staple your sales receipt or invoice to the
inside Cover of this guide. Keep this user's guide in a convenient place for future
reference. Keep the Carton and original packaging for future use.
Model
Number:
Serial
Number:
LCT1609-001A-A
0304TNH-II-IM
CAUTION:
To reduce the risk of electric shock.
Do not
remove cover (or back). No user serviceable
parts inside. Refer servicing to qualified service
personne!.
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsutated "dangerous voltage" within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARDS,
SET TO RAIN OR MOISTURE.
CAUTION:
TO INSURE PERSONAL SAFETY, OBSERVE
REGARDING THE USE OF THIS UNIT.
DO NOT EXPOSE THIS TV
THE FOLLOWING
RULES
1. Operate only from the power source specified on the unit.
2. Avoid damaging the AC plug and power cord.
3. Avoid Improper installation and never position the unit where good
ventilation is unattainable.
4. Do not allow objects or liquid into the cabinet openings.
5. In the event of trouble, unplug the unit and call a service technician.
not attempt to repair it yourself or remove the rear cover.
Do
Changes or modifications not approved by JVC could void the warranty.
* When you don't use this TV set for a tong period of time, be sure to
disconnect both the power plug from the AC outlet and antenna for your
safety.
* To prevent electric shock do not use this polarized plug with an
extension cord, receptacle or other outlet unless the blades can be fully
inserted to prevent blade exposure.
I
IMPORTANT
This product utilizes both a Cathod_er
components
that
contain lead. Disposal of these _our
community
due to
environmental
Considerations.
For disposal or recycling information, please contact
your local authorities,
or the Electronic Industries Alliance:
http:l/www.eiae.org
.
As an "ENERGY STAR ®'' partner,
JVC has determined that this
product or product model meets the
"ENERGY STAR ®', guidelines for energy
efficiency.
oo
_
.
_o
.
e
CAUTION:
Please read and retain for your safety.
Electrical energy can perform many useful functions. This TV set has been engineered and
manufactured to assure your personal safety. But improper use can result in potent!am
electrica! shock or fire hazards. In order not to defeat the safeguards incorporated in this
TV set, observe the following basic rules for its installation, use and servicing. Also follow all
warnings and instructions
marked on your TV set.
INSTALLATION
1 Your TV set is equipped with a polarized AC line plug (one
blade of the plug is wider than the other). This safety feature
allows the plug to fit into the power outlet only one way.
Should you be unable to insert the plug fully into the outlet,
try reversing the plug. Should it still fail to fit, contact your
electrician.
(POLARIZED-TYPE)
2 Operate the TV set only from a power source as indicated on the TV set or refer to the
operating instructions for this information. If you are not sure of the type of power supply to
your home, consult your TV set dealer or local power company. For battery operation, refer
to the operating instructions.
3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords
and broken plugs. They may result in a shock or fire hazard. Call your service technician for
replacement.
4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set
where power cord is subject to traffic or abuse. This may result in a shock or fire hazard.
Do not use this TV set near water -- for example, near a bathtub, washbowl,
laundry tub, in a wet basement, or near swimming pool, etc.
kitchen sink, or
6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded
so as to provide some protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of antenna discharge unit, connection
requirements for the grounding electrode.
7 Anoutside
antenna
system
should
notbelocated
inthevicinity
ofoverhead
power
lines
orother
electric
lightorpower
circuits,
orwhere
itcanfallintosuch
power
linesorcircuits.
When
installing
anoutside
antenna
system,
extreme
careshould
betaken
tokeep
from
touching
suchpower
linesorcircuits
ascontact
withthemmight
befatal.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
GROUND
ANTENNA
DISCHARGE
(NED
UNIT
SECTION
810-20)
ELECTRICAL
SERVICE
_ROUNDING
EQUIPMENT
(NEC
_I_INEC = NATIONAL
ELECTRIC
CODE
8 TV sets are provided with ventilation
operation to be released.
SECTION
CONDUCTORS
810=21)
POWER SERVICE GROUNDING
ELECTRODE
SYSTEM
(NEC ARTICLE
250,
PART H)
openings in the cabinet to allow heat generated during
Therefore:
-- Never block the bottom ventilation
rug, etc.
slots of a portable TV set by placing it on a bed, sofa,
-- Never place a TV set in a "built-in" enclosure unless proper ventilation
-- Never cover the openings with a cloth or other material.
-- Never place the TV set near or over a radiator or heat register.
9 To avoid personal
-----
is provided.
injury:
Do not place a TV set on a sloping shelf unless properly secured.
Use only a cart or stand recommended by the TV set manufacturer.
Do not try to roll a cart with small casters across thresholds or deep pile carpets.
Wall or shelf mounting should follow the manufacturer's instructions, and should use a
mounting kit approved by the manufacturer.
10 Caution children about dropping or pushing objects into the TV set through cabinet
openings. Some internal parts carry hazardous voltages and contact can result in a fire or
electrical shock.
11 Unplug the TV set from the watt outlet before cleaning. Do not use liquid or an aerosol
cleaner.
12 Never add accessories to a TV set that has not been designed for this purpose. Such
additions may result in a hazard.
PORTABLE
CART
WARNING
(Symbol provided by RETAC)
13 For added protection of the TV set during a lightning storm or when the TV set is to be left
unattended for an extended period of time, unplug it from the wall outlet and disconnect the
antenna. This wilt prevent damage to product due to lightning storms or power line surges.
14 ATV set and cart combination should be moved with care. Quick stops, excessive
and uneven surfaces may cause the TV set and cart combination to overturn.
=
force,
=
15 Unplug this TV set from the walt outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the TV set.
C. If the TV set has been exposed to rain or water.
D. If the TV set does not operate normally by following the operating instructions. Adjust
only those controls that are covered in the operating instructions as improper adjustment
of other controls may result in damage and will often require extensive work by a
qualified technician to restore the TV set to normal operation.
E. If the TV set has been dropped or damaged in any way.
F. When the TV set exhibits a distinct change in performance
service.
-- this indicates a need for
16 Do not attempt to service this TV set yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
17 When replacement parts are required, have the service technician verify in writing that the
replacement parts he uses have the same safety characteristics as the original parts. Use
of manufactureCs specified replacement parts can prevent fire, shock, or other hazards.
18 Upon completion of any service or repairs to this TV set, please ask the service technician
to perform the safety check described in the manufactureCs service literature.
19 When a TV set reaches the end of its useful life, improper disposal could result in a picture
tube implosion. Ask a qualified service technician to dispose of the TV set.
20 Note to CATV system installer.
This reminder is provided to call the CATV system installeCs attention to Article 820-40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the
point of cable entry as practical.
|
By displaying fixed images for extended periods of time, can leave a subtle but permanent ghost
image in your picture. This is referred to as "burn-in". To avoid this, mix your viewing pattern.
Examples include, but are not limited
o
o
o
o
o
to the following:
Stock-market report bars
Shopping channel loges and pricing displays
Video game patterns or scoreboards
Bright station loges
Internet web sites or other computer-style
images.
DVD discs, video tapes, laser discs
Broadcast, cable, satellite channels or digital
television tuners/converters.
For example...
TV on
TV off
Note: Warranty DOE8 NOT cover screen
burn-in or uneven picture tube aging.
Normally, light dusting with a soft, non-scratching
duster wilt keep your TV clean.
If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly
moistened with water. You can add a few drops of mild liquid detergent to the water to help
remove spots of oily dirt.
o
o
o
o
DO
DO
DO
DO
NOT
NOT
NOT
NOT
allow liquid to enter the TV through the ventilation slots.
use strong or abrasive cleaners on the TV.
spray liquids or cleaners directly on the TV's surface.
rub or scrub the TV harshly. Wipe the set gently with a soft cloth.
The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a
soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner
and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.
Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen.
These will remove the coating layer and cause discolorations.
Do not push or hit the screen. This could cause scratches
distortions.
on the screen surface and image
o0
.
0
_
_
_
m
_
•
•
o
Unpacking your TV ............
TV Models ................
TV Remote Control ...........
8
9
10
Getting Started .............
The Remote Control ..........
I1
I1
Connecting Your Devices .......
Interactive Plug In Menu ........
"
•
"
m
•
o
_
12
21
e
Setting CATV, VCR and DVD Codes . . . 24
CATV or Satellite Codes ........
24
VCR Codes ..............
25
DVD Codes ..............
26
Search Codes .............
27
o
....
Using the Guide .............
Onscreen Menu System .........
28
29
Auto Tuner Setup ............
Channel Summary ............
V-Chip ..................
Set Lock Code .............
31
31
33
39
Adjusting CRT Color Conversion
Auto Demo ...............
.....
40
42
Language ................
Closed Caption .............
Auto Shut Off ..............
XDS ID .................
42
43
43
44
Noise Muting ..............
Front Panel Lock ............
44
44
V1 Smart Input ...........
Video Input Label ..........
Position Adjustment ...........
Power Indicator .............
45
45
46
46
Digital-in .................
Digital-in Audio .............
Center CH Input .............
47
47
48
b
"
_
o
_ e
Sound Settings .............
Adjust Sound Settings .........
MTS (Multi-channel Sound) .......
e
Picture Settings .............
Adjust Picture Settings .........
Color Temperature ............
Digital Noise Clear ............
VSM ...................
Natura! Cinema ...........
Reset ..................
, o
49
49
49
50
50
50
51
52
52
52
o
Set Clock ................
On/Off Timer ...............
•
53
54
•
Multi Screen Function
Index ..................
Twin .................
Freeze ..................
..........
55
55
55
56
Swap .................
Select ..................
Power ..................
Number Buttons .............
Tune ...............
56
56
57
57
57
Input ...................
Channel +/- . ............
Volume +/- . ............
Return + ...............
Sound ..................
57
57
57
58
58
Muting ..................
Video Status ...............
TheaterPro D6500K ...........
58
59
59
Sleep Timer ...............
Display .................
C.C ....................
59
60
60
Aspect
.................
Aspect Ratios .............
Menu ..................
OK ...................
Back ...................
TV/CATV Slide Switch ..........
VCR/DVD Slide Switch .........
VCR Buttons ...............
DVD Buttons ...............
61
61
62
62
62
63
63
63
63
Light ...................
Super Focus ...............
63
63
_ o
e "
o
"
No Program ..............
Troubleshooting
.............
Warranty .................
Authorized Service Centers
a _
64
65
66
67
.......
Specifications
...............
Notes ..................
68
69
|
Thank you for your purchase of a JVC Color Television. Before you begin setting up your new
television, please check to make sure you have all of the following items. In addition to this
guide, your television box should include:
Two AA
1 Television
I Remote Control
Batteries
Note: Your television
and/or remote
control may differ
from the examples
illustrated
here.
_t Once haveunpa_ked
you
y%ur
television, the-----------_lextstep
is to c_:nnect
it__
able or satellite system and to connect the audio!vide o devices you want to use with your
e!evision. To make these connections you "wi!l use plugs like the ones i!lustrated below.
Used to connect an
external antenna or
cable TV system to
your TV.
Used to connect audio/
video devices like
VCRs, DVD players,
stereo amplifiers, game
consoles, etc.
Used to make video
connections with S-Video
VCRs, Camcorders and
DVD players.
Used to connect JVC
AV CompuLink capable components
for an automated home theater.
We recommend that before you start using your new television, you read your entire User's
Guide so you can learn about your new television's many great features. If yodre anxious to
start using your television right away, a quick setup guide follows on the next few pages.
I
NOTE:
Before
youconnect
yourtelevision
toanother
device,
please
refer
totheproper
diagrams
foryourspecific
TVandremote.
These
willhelpassist
youinunderstanding
how
toconnect
yourtelevision
toanother
device,
asweltasusetheremote
tosetup
yourtelevision.
MODELS:
AV-56P585
AV-S6P575
AV-48P575
A_
_
l_UBiO
L kANALO_
J
i
r _
............
__
_:_
MODELS:
m
VIDEO
I_._._
I_0 /
,_._1_,
i/
_J
\
•
©o_of
.
_
.
AV-56P585,
e
.
AV-56P575, AV-48P575
MODELS:
AV-S6PS85
AV-S6PS75
AV-48P575
, For information
on remote control buttons, see pages 55 - 63.
These
quick
setup
pages
willprovide
you,inthree
easy
steps,
withthebasic
information
you
need
tobegin
using
yournewtelevision
rightaway.
Ifyouhave
questions,
orformore
detailed
information
onanyofthese
steps,
please
consult
other
sections
ofthismanual.
Before
youcanoperate
yourremote
control,
youfirstneed
toinstall
thebatteries
(included).
Liftandpullthelatchontheback
oftheremote
control
toopen.
Insert
twobatteries
(included)
carefully
noting
the"+"and'-" markings, placing
the "-" end in the unit first. Snap the cover back
into place.
When you change the batteries, try to
complete the task within three minutes, if you
take longer than three minutes, the remote
control codes for your VCR, DVD, and/or
cabme box/satemlite receiver may have to be
reset. See pages 24 - 27.
Key Feature
Buttons
The four key feature buttons at the center of the remote can be
used for basic operation of the television. The top and bottom
buttons will scan forward and back through the available
channels. To move rapidly through the channels using
JVC's Hyperscan feature, press and hold CH+ or CH-. The
channels will zip by at a rate of five channels per second. The
right and left buttons will turn the volume up or down. These
buttons are also marked with four arrows and are used with
JVC's onscreen menu system. To use the onscreen
press the MENUbutton.
Basic
menus,
Operation
Turn the television on and off by pressing the POWERbutton at the top right corner
of the remote. If this is the first time you are turning on the TV, the interactive
plug-in menu appears.
* Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if
you need to operate a cable box.
Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to
DVD to control a DVD player. Please see pages 24 to 27 for instructions on
programming your remote control to operate a cable box, VCR or DVD player.
= Ii
•
=
o
•
m =
=
Please follow the flow chart below to determine which connection setup is right for you. Then,
refer to the appropriate diagrams to connect your television to other devices that you may
have. After you are finished connecting your devices, plug the power cord into the nearest
power outlet and turn on the TV.
A VC_ i_not necessa(y
for Operation Of th e television, If yOu foll0W !hes e diagrams an d th e q
television doe s not work properly , contact you r loca! cable epe[at0r:
i To connect a D vu p!aye[_ see Diagram
,
#3: A DVD player is optional.
!f you have a Satellite te!evisien system, please refer te the Satellite TV manual.
I
i
Do you have aVCR?
Diagram
#2
Diagram
Do you use a CableTV
i
#1
Box?
I
I
Do you have aVCR?
Diagram
#3
I
Diagram #1
J
Diagram
#t
Cable or Antenna
Output
OR
TV Rear Panel
Note:
• If you do not have a cable box, connect the cable wire from the wall outlet into the back of
the TV.
Diagram
#2
Cable or Antenna
Output
TV Rear Panel
Coaxial
Cable
Two-Way
Splitter
R
L
V
Notes:
• If your VCR is a mono sound unit, it will have only one audio out jack. Connect it to the
LEFTAUDIO INPUT on the front of the TV.
• Use the S-Video connection
if possible for superior picture quality.
• Your VCR must be turned on to view premium cable channels.
Notes:
. Green,
blueandredarethemost
common
colors
forDVD
cables.
Some
models
mayvary
colors.
Please
consult
theuseCs
manual
foryourDVD
player
formore
information.
. Becareful
nottoconfuse
theredDVD
cable
withtheredaudio
cable.
Itisbesttocomplete
onesetofconnections
(DVD
oraudio
output)
before
starting
theother
toavoid
accidentally
switching
thecables.
. Youmayalsoconnect
theDVD
player
toInput
1.
Diagram
#3
Cable or Antenna
Output
Coaxial Cable
Two-Way
Splitter
VCR
TV Rear Panel
Green
Blue
DVD Player (OPTIONAL)
Red
R
L
OUT
Connecting
to JVC AV Compu
Link
JVC's AV CompuDnk fea[ure makes playing video tapes or DVDs totally automatic. Simply
insert a pre-recorded tape into your JVC brand VCR or DVD into your JVC DVD player anc
the device wili automatically turn on and begin playback. At the same time. using the
AV CompuLink, the VCR or DVD player senas a signal to the telewslon telling it to turn on
aria sw_tch to the proper wdeo npuL
• ]-he AV CompuLink cable may be included with the JVC AV CompuDnk unit you
wish Lo connect. If it is no[. contact JVC Parts Department at (800_-882-2345. or
www.jvcservice.com
for par[ _ EWP 805-012.
. AV CompuLink
can only De usea with JVC brand products.
AV CompuLink
Cable
To Connect: Plug one end of the AV CompuLink cable
into the AV COMPULINK INPUT on your VCR, DVD,
or other CompuLink device. Plug the other end of the
AV CompuLink cable into the AV COMPULINK at the
rear of the television.
Note:
* The AV CompuLink
plug on each end.
cable has a male 3.5 mm (mono)
VCR
TV Rear
Panel
AVOOt,_PUUNK
,I
@-(_
_) _)
@--_
@ GOUT
V
L
IN
R
AV CompuLink
Notes:
• In order for the VCR playback to begin automatically, the recording tabs must be removed
from the VHS tape. If the tab is in place, automatic switching will occur when you push the
VCR's
PLAY button.
• If your JVC brand VCR has "A code/B code remote control switching" (see your VCR's
instruction book), using VCRA code wilt switch the TV to input 1.
• Refer to your DVD instruction
book for detailed connection
information.
• To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see
the receiver connection instructions for detailed connection information.
• AV CompuLink
is compatible with select AV CompuLink
receivers.
Connecting
to a Camcorder
You may connect a Camcorder, game ConSole Or other equipment to your television by using ]
th e front input Jacks (input 4) located under the front panel door: To access, pull on the door |
to open it. You can a!so connect these using the televisionls rear input jacks, using the same |
_ nstruct ons.
I) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on
the front of the TV, OR connect an S-Video cable from the front of the TV to the camcorder.
2) Connect a white cable from the camcorder LEFTAUDIO
the front of the TV.
OUT, into the LEFTAUDIO
3) Connect a red cable from the camcorder RIGHTAUDIO
the front of the TV.
OUT, into the RIGHTAUDIO
IN on
IN on
Note:
* If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the
LEFTAUDIO IN on the front of the TV.
Connecting
in rnulti-channe!
to the Surround
Amplifier
sound sUCh as 5:1 Channe !, the speech characters
are played back from the
I
center sPeaker:
A Center Speaker in a movie theater is Set in back of the Screen so it Can recreate a
conversation scene in the movie more natually. By using your TV's speaker as the center
speaker, you Can Obtain th e sam e SOUnd effect as in a movie theater in you home theate r
sound system.
j
J
J
I
Front
Front
Surround
TV Rear Panel
o_"._._
,4.._
R J*
i :/
.........
:1,
'_ J
,u:J_TJ
CENTER
CHANNEL
(VARIABLE
OUTPUT
OUTPUT)
I) Connect the Pin cable from the TV's CENTER CHANNEL INPUT terminal to the surround
amplifier's CENTER CHANNEL OUTPUT terminal.
Note:
* Please read the benefit of this feature on page 47.
Connecting
to a Digital
TV Receiver
By connecting a Digital TV Reciever, high definition pictures can be displayed on your TV in
their digital form.
DTV Decoder
DIGITAL OUT
AUDIO OUT
TV Rear Panel
HDMI to DVl Cable
After the connections have been made,
tighten the screw to secure the cables.
1 ) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to
the DIGITAL-IN on the back of your television.
2) Connect a red cable from the DTV decoder RIGHT AUDIO OUT, to the RIGHT AUDIO DIGITAL-IN on the back of your television.
3) Connect a white cable from the DTV decoder LEFT AUDIO OUT, to the LEFTAUDIO
TAL-IN on the back of your television.
DIGI-
• The digital-in terminal is not compatible with the picture signal of a personal computer.
• Use a HDMI to DVl cable (commercially
with a DTV decoder.
available)
in order to digitally connect the television
Notes:
• If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance
may be slightly shifted. Access the "DIGITAL-IN" in the initial setup menu to adjust it. (Refer
to page 47.)
• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to
ANALOG. See "DIGITAL-IN AUDIO", page 47.
Connecting
to a HDM! Compatible
Device
By connecting a HDMI compatible device, high definition pictures can be displayed on your
TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI
compatible device.
HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all
digital audio/video interface. HDMI provides and interface between any audio/video source,
such as a set-top box, DVD player, A/V receiver or an audio and/or video monitor, such as a
digital television (DTV).
HDMI Compatible
Device
TV Rear Panel
HDMI Cable
1) Connect the HDMI Cable from the DIGITAL OUT on the back of your DTV or HDMI device, to
the DIGITAL-IN on the back of your television.
Note:
• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to
DIGITAL. See "DIGITAL-IN AUDIO", page 47.
Connecting
to an AV Receiver
V1 Smart Input
using your
television's
By connecting your AM Receiver to your television's Vl Smart Input, you can watch picture
sources from many different devices, without having to change or use the other input
connections on your TV. This allows you to free up the other input connections so you can
connect more devices to your television.
AV Receiver
MONITOR
OUT
TV Rear Panel
1 ) Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video
on the back of your television.
2) Connect a Yellow Composite Cable from the AV Receiver's
INPUT-1 on the back of your television.
INPUT-1
MONITOR OUT, into the VIDEO
3) Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT, into the Y
VIDEO INPUT-1 on the back of your television.
4) Connect a Blue Component Cable from the AV Receiver's PB MONITOR OUT, into the Pb
VIDEO INPUT-1 on the back of your television.
5) Connect a Red Component Cable from the AV Receiver's
VIDEO INPUT-I on the back of _our television.
PR MONITOR OUT, into the Pr
Note:
• Please refer to your AM Receiver instruction manual for more information on connecting
speakers and other devices like a DVD player.
• Use your AV Receiver's remote to switch to the different devices you have connected.
• Some AV Receivers may not respond when the Vl Smart Input function is turned on.
your
• If you have video connections for each input device connected to your AV Receiver, you
should not connect them using both S-Video and Composite connection at the same time
when you are using Vl Input as the VI Smart Input. In this case we recommend using the
S-Video connection.
When
youturnyourtelevision
onforthefirsttimetheinteractive
plug-in
menu
wiltappear.
The
plug-in
menu
helps
youtogetyourTVready
tousebyletting
yousetyourpreferences
for:
• Thelanguage
inwhich
youwanttheonscreen
menus
toappear.
• Setting
theTV'sclock
tothecorrect
timesoyourtimer
functions
willworkproperly.
Youcan
choose
"AUTO"
or"MANUAL"
forsetting
theclock.
• Theauto
tuner
setup
ofwhich
channels
youwishtoreceive.
Werecommend
youcomplete
theinteractive
plug-in
items
before
youstartusing
your
television.
Notes:
• Theinteractive
plug-in
menu
setting
does
notappear
ifyourTVhasbeen
turned
onbefore.
Inthiscaseusetheonscreen
menus
toperform
these
settings.
Seepages
42,53and31.
• Ifyoupress
theMenu
button
while
setting
uptheinteractive
plug-in
menu,
itwillskipoverit.
Language
After the "JVC INTERACTIVE PLUG tN MENU" has been displayed, the TV automatically
switches to the LANGUAGE settings. You can choose to view your onscreen menus in three
languages: English, French (Frangais) or Spanish (Espai_ol).
To choose a language:
(English, Frangais or Espa_ol)
V
[
4 ENGLISH
To NEXT (To set clock)
}'
,r NEXT
(To be continued...)
Auto
Clock
Set
Before you use any of your TV's timer functions, you must first set the clock. You may precisely
set your clock using the XDS time signal broadcast by most public broadcasting stations. If you
do not have this in your area, you will have to set the clock manually. See manual clock set
below. To set the clock using the XDS signal:
To choose AUTO
I MODE
4 AUTO
TIME
V
To TIME ZONE
V
To select your time zone: (Atlantic, Eastern,
Central, Mountain, Pacific, Alaska or
Hawaii)
To move to D.S.T. (Daylight Savings Time)
1'
:
TIMEZONE
D.S.T.
_ATLANTIC_
4ON_
I
To turn D.S.T. ON or OFF
v NEXT
sE _oPER_,
To NEXT (To Auto Tuner Setup)
X_
Notes:
• D.S.T. can be used only for US and Canada when it is set to ON in the SET CLOCK menu.
• Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts
your TV's clock for Daylight Savings. The clock wilt move forward one hour at 2:00 am on
the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in
October.
• You will have to reset the clock after a power interruption.
operating any timer functions.
Manual
Clock
You must set the clock before
Set
To set your clock manually (without using the XDS signal), choose MANUAL. If you choose
AUTO, see auto clock set above.
To choose MANUAL
V
[MODE
_ MANUAL_
TIME
-- : ....
TIME
ZONE
_1t_
V
{ ATLANTIC
D.S.T.
To set the hour
To minute
To set the minute
_ON
V
'_ START
To TIME
To Start Clock
CLOCK
Note:
° You will have to reset the clock after a power interruption
operating any timer functions
You must set the clock before
(To be continued...)
Auto Tuner Setup
In auto tuner setup, the TV automatically scans through all available channels, memorizing the
active ones and skipping over blank ones or channels with weak signals. This means when you
scan (using the CHANNEL+/-- buttons) you will receive only clear, active channels.
To choose CABLE or AIR (or SKIP when
you skip Auto Tuner Setup)
To START
V
TUNER
MODE
4 CABLE
NOW
PROGRAMMING!/
',r START
48
Programming
will take approximately
minutes.
1
1 to 2
When the setup is finished, THANK YOU!! SETUP IS NOW COMPLETE is displayed. Your
quick setup is now complete. You can now begin watching your television, or you can continue
on in this guide for more information on programming your remote control, or using the
JVC onscreen menu system to customize your television viewing experience.
Notes:
• Noise muting will not work during Auto Tuner Setup.
• Skip appears only for interactive
plug-in menu.
Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending
on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is
normal.
The Quick Setup
is complete
o
_
_
"
.
e t
II
co _
player by using the instructions and code s listed below. If the equipment does not respond
to any of the codes listed below or to the cede search function, use the rem0te €0ntro I
You Can Program Y0Ur rem0te t o operate Your Cable bOX, Satellite receiver, VCR or DVD
supp ed by the manufacturer.
The remote control is programmed with cable box and satellite codes for power on/off,
channel up/down, and I0 key operation.
I) Find the cable box or satellite brand from the tist of codes shown below.
2) Slide the 2-way selector switch to "CATV".
3) Press and hold down the DISPLAYbutton, then enter the first code number listed with the 10
key pad.
4) Release the DISPLAYbutton, and confirm the operation of the cable box/satellite receiver.
o If your cable or satellite box does not respond to the first code, try the others listed. If it does
not respond to any code, try the search codes function, on page 27.
ABC
O24
Puser
O32
Archer
032,025
RCA
061,070
Cableview
051,032
Realistic
O32
Citizen
022,051
Regal
Curtis
058,059
058,064,040,
041,042,045,
O68
Diamond
024,032,025
Eagle
029
Eastern
O34
GC Brand
032,051
Gemini
022,043
Echostar
100, 113,114,
115
Express VU
100, 113
G.E.
106
G.I.
108
Regency
O34
Rembrandt
037, 032, 051,
O38
Gradiente
112
Samsung
051
Hitachi
104, 111
Scientific Atlanta
057,058,059
HNS (Hughes)
104
SLMark
051,047
Panasonic
105
Sprucer
051,056
Philips
102, 103
Stargate
032,051
040,041,042,
045,058,064
Primestar
108
Telecaption
067
Proscan
106, 109,110
Hitachi
049, 024
Teleview
047,051
RCA
106, 109,110
Jerrold
065,024,025,
026,027,020,
Texscan
044
Sony
107
021,022,057,
023
Tocom
035,036,066
Star Choice
104, 108
Toshiba
O5O
Toshiba
101
049,050,051,
O54
Unika
032,025
Uniden
102, 103
Universal
022,032
Genelal Instrumenl 065,024,025,
026,027,020,
021,022,057,
023
Hamlin
Macom
Magnavox
O33
Memorex
O3O
Videoway
052
Movietime
032,051
Viewstar
029,030
Oak
039,037,048
Zenith
063, 046
Panasonic
055,056,060,
071,073
Zenith/Drake
Satellite
O46
Paragon
063
Philips
028,029,030,
052,053,031,
069
Pioneer
047, 062
Pulsar
051,032
J
•
o _
The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward,
rewind, pause, record, channel up/down operation.
1 ) Find the VCR brand from the list of codes shown below.
2) Slide the first 2-way selector switch to 'TV" and the other 2-way selector switch to "VCR".
3) Press and hold down the DISPLAYbutton, then enter the first code number listed with the 10
key pad.
4) Release the DISPLAYbutton, and confirm the operation of the VCR.
• If your VCR does not respond to the first code, try the others listed. If it does not respond to
any of the codes, try the search codes function on page 27.
• After you program your remote, some VCR buttons may not work properly. If so, use the
VCR's remote.
• To record, hold down the REC button on the remote and press PLAY.
Admiral
035
MaJantz
003,004,005
AJwa
027,
032,
095
Marta
064
Akai
029,
072,
073,
Memorex
024,
067
Samtron
089
074
003,005
MGA
038, 040, 047,
048,041,042
SansuJ
003,
052
063,071
Minolta
058,045,093
Sanyo
Broksonic
063,067,091,
071
020,026,094
MitsubJshJ
038,040,047,
Canon
023,025
048,041,042,
Scott
059,060,062,
CCE
043
078,090
Citizen
064
Multitech
047,027,062
Craig
CurtisMathes
063,029,064
NEC
Olympic
003,004,005,
000
024,023
Sears
045,024,027,
093
063,064,065,
066,058,000,
001
Daewoo
043,059,024,
092
Optimus
028,021,035,
064
ShJntom
Sharp
075
035,036,080,
DBX
003,004,005
Orion
026,020
Dimensia
045,093
PanasonJc
023,024,021,
Signature
022
Singer
075
043,026,077,
061,025,
o42,
Penney
024,058,045,
Sony
028,029,030,
Audio Dynamic
Bell & Howell
Emerson
063,066,067,
065,071,091
Pentax
027,
000
026, 020,
Philco
G.E.
033,
045, 024
Go Video
037,
051,049,
050,
089
Funai
GoidstaJ
064
GradJente
083,
084, 081,
031,024,
023,026,
PhiHps
031,023,
023
Proscan
045,058,
instant Replay
024,023
densen
003
JVC
000,001,002,
003,004,005
Kenwood
LXl
RCA
Shack
033,024,063,
036,067,040,
027
027,
020,
024,
SV 2000
027
Sylvania
031,023,024,
027
Symphonic
027,081
Tashiro
064
Tatung
003,
004,
Teac
003,
004,027,
023,024,031,
046,059,060,
027,064,058,
083,084,085,
087,093
Realistic
024,063,036,
067,040,027
005
005
023,
Technics
021,022,023,
Teknika
024
024,
Toshiba
059,046,079
Vector Research
005
Wards
035,036,067,
044,064
063,003,004,
027,070
023,
Yamaha
033,045,058,
005
031,023,024,
O86
027,035
024
Radio
065,066,063,
Magnavox
087,093
021,022,
003,004,064,
067
2000
053,054,055
024,031,046,
059,060,
033,
QuasaJ
026,020,
088
086
Pioneer
089
067,038,040,
047,048,026,
020
043
Hitachi
045, 058,
081,093
033,
058,005,045,
093
000,001
023,
027,
037,060,062,
06%003,004,
005,093
020,076
Fisher
Samsung
005
Zenith
044,082,064,
094
The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward,
rewind, previous/next chapter, tray open/close, and stilt/pause operation.
I) Find the DVD player brand from the list of codes shown below.
2) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "DVD".
3) Press and hold down the DISPLAYbutton, then enter the first code number listed with the 10
key pad.
4) Release the DISPLAYbutton, and confirm the operation of the DVD player.
o If your DVD player does not respond to the first code, try the others listed. If it does not
respond to any of the codes, try the search codes function on page 27.
o After you program your remote, some DVD buttons may not work properly. If so, use the
DVD player's remote.
Aiwa
043
RCA
021,026
Apex
Denon
040
Sampo
034
020,
037
Samsung
030
Hitachi
030,
031
028
JVC
000
Sharp
Silvania
Kenwoed
035
Sony
024,045,046,
Konka
039
Mitsubishi
025
Technics
020
Onkyo
Oritron
041
Toshiba
023
044
Vialta
O5O
Panasonic
020
Wave
O42
Philips
Pioneer
023,
Yamaha
O2O
Zenith
027,032
Raite
033
022
038
047
036
•
e =
CabielSateiiite
Search Codes Function
1)
2)
3)
4)
Slide the first 2-Way Mode Selector switch to CATV.
Press the POWERand RETURN+buttons. Hold for at least three seconds and release.
Press the POWERbutton on the remote, and see if the cable or satellite box responds.
If there was a response, press RETURN+.The codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use
the remote control that came with your equipment.
5) Press RETURN+to exit.
VCR/DVD Search Codes Function
I) Slide the first 2-way selector switch to "TW' and the other 2-way selector switch to "VCR" or
"DVD".
2) Press the VCR or DVD POWERand RETURN+ buttons.
release.
Hold for at least three seconds and
3) Press the VCR or DVD POWERbutton, and see if the VCR or DVD responds.
4) If there was a response, press RETURN+.The codes are now set. tf there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for
the DVD player), and there is no response, use the remote control that came with your
equipment.
5) Press RETURN+to exit.
!1
Certain symbols are used throughout this guide to help you learn about the features of your
new television. The ones you will see most frequently are:
AY
Up and
buttons
° Move
° Move
° Move
° Back
° Scan
Down arrows mean press the CH+ or CH- buttons. Pressing the CH+ or CHlet you:
vertically in a main menu screen
through a submenu screen
to the next letter, number, or other choice in a submenu
up to correct an error
through TV channels (when not in a menu screen)
4 _
Left and right arrows mean press the VOLUME+or VOLUME--buttons to move left or right
to:
° Select a highlighted menu item
* Select an item in a submenu
* Select numbers in certain menu options
° Turn the volume up or down (when not in a menu screen)
The "press button" icon means you should press the button named on your remote
control. (Button names appear in SMALLCAPFAL LETTERS.)
The "helping arrow" icon points to the highlighted
or selected item in a menu.
To bring up the onscreen menu, press the MENU button on the remote control. The item that
appears in green is the one currently selected. If you use the Menu button on the TV's front
panel instead of the remote, an additional menu screen showing INPUT, VIDEO STATUS and
ASPECT will appear between INITIAL SETUP and PICTURE ADJUST. The "interactive plug-in
menu" wilt appear the first time the TV is plugged in.
n
"_ PREVIOUS
AUTO
TUNER
CHANNEL
SETUP
SUMMARY
V-CHIP_'
SET LOCKCODE
CONVERGENCE}'
AUTODEMO
_'NEXTPAGE
;_
_"
'1OFF
(4/4)
Note:
• Menus shown in this book are illustrations,
displays.
not exact replications
of the television's
onscreen
=
0
....
Your television comes with JVC's onscreen menu system. The onscreen menus let you make
adjustments to your television's operation simply and quickly. Examples of the onscreen
menus are shown on the next page. Detailed explanations on using each menu follow later in
this guide. For information about the interactive plug-in Menu, see pages 21 - 23.
To open the onscreen menu system, press the MENU button on the remote control. You
navigate within the onscreen menus by using the four directional arrow buttons on the remote
control. (These buttons are also the CH +/- and VOL +/- buttons. Channel and volume functions
will not operate when the onscreen menu is active).
The selected feature and option on a menu screen are highlighted
Selected
Option
Green
in a different color.
/
Selected
Option
B,oe/
To move to a different feature use the _t,T arrows to move up or down the list. When you
press the up arrow at the top of the list or the down arrow at the bottom, the next menu screen
will appear. Use the arrows _1 _ to select an option from the highlighted feature. Pressing
MENU on the remote control will close the onscreen menu system and return you to normal
television viewing.
Each menu and its features will be discussed
in the following pages of this guide.
, !f you do not pres s any buttons for a few second s, the onsc[een menu will automatically
shutoff.
i Buttoil ilarnes in this guide are shown in SMALL CAPITALLETTER_
Menus may appear in different Sizes Onscreen depending on the aspect ratio selected.
, Some menu items may not appear in menu screens when certain aspect ratios or inputs
are selected.
(_
Press
theMENU
button
PREVIOUS
AUTO
_ PREVIOUS
TUNER
CHANNEL
[]
SETUP!
SUMMARY
)
_===========
V-CHIP
SET LOCK
CODE
LANGUAGE
CLOSED
AUTO
FRAN.
CAPTION
SHUT
ESP.
_
OFF
iOFF
XDS ID
¢OFF
CONVERGENCE
AUTO
DEMO
NEXT
B
_OFF
PAGE
NEXT
(4/4:
PAGE
(3/4)
i
Ext
INITIAL SETUP 03
INITIAL SETUP 04
nlt
;tn
Notes:
PREVIOUS
TINT
_ 00
_
COLOR
{ 00
_
PICTURE
_00_
BRIGHT
_ 00
_
_ 00
_
DETAIL
COLOR
_
J
_{_
TEMPERATURE
v NEXT
• The DIGITAL-IN menu
STANDARD
{ LOW
PAGE
(1/2)
_ ECT-OR_AT_
E×l
PICTURE ADJUST 01
on the TV front panel
is pressed, the FRONT
PANEL CONTROL
menu between INITIAL
SETUP 4/4 and
PICTURE ADJUST I/2
STANDARD
I DIG. NOISE
CLEAR_
OFF
VSM
PANEL
VI
SMART
VIDEO
4OFF I
INPUT
INPUT
POSITION
POWER
_ON_
LOCK
4OFF_
INDICATOR
NEXT
I
LABEL
ADJUSTMENT
_HIGH
PAGE
(2/4)
INITIAL SETUP 02
t_I
SET8
PREVIOUS
I DIGITAUIN
_ SIZE1
DIGITAL-IN
AUDIO
_ DIGITAL_
_ON)
NATURAL
v NEXT
CINEMA
!
AUTO
]
will appear.
CENTER
NEXT
PAGE
CH
INPUT
PREVIOUS
_ 00
_
TREBLE
_ 00
)
BALANCE
I 00
t
MTS
_
SET
CLOCK
ON / OFF TIMER
SAP
RESET
PAGE
SOUND ADJUST
(1/4)
i
INITIAL SETUP 01
02
PREVIOUS
BASS
_OFF_
PAGE
E_T_
PICTURE ADJUST
v NEXT
MUTING
FRONT
• When the Menu button
al;B
PREVIOUS
can onty be displayed
when a 480p picture
signal is input to the
digital-in terminal and
the picture is being
displayed on the
screen.
PREVIOUS
NOISE
MONO
[]
NEXT
PAGE
CLOCK/TIMERS
_
I
Theautotuner
setup
function
isdescribed
onpage
23astheinteractive
plug-in
menu.Ifyou
need
toruntheautotuner
setup
again,
follow
thesteps
below.
12
Press
theMENU
button
AY
ToAUTO
TUNER
SETUP
II_ Tooperate
_
Tochoose
CABLE
orAIR
Press
theOKbutton
tostart
I TUNER
MODE
f2
PRESS_TO
{CABLE
_,
STABT
Programming wilt take approximately 1 to 2 minutes. The auto tuner is finished when the
message PROGRAMMING
OVER! appears onscreen.
2
Press the Menu button when finished
Channel summary allows you to customize the line-up of channels received by your TV. You
can add or delete channels from the line-up or set the channel label as you like or prevent any
unauthorized viewers from watching any or all I81 channels.
2
AY
Press the MENU button
To CHANNEL SUMMARY
4 _
To operate
CHNO
SO_ ID a
01
02
The Channel summary screen will now be displayed with
the channels set to scan marked with an '%". You can delete
channels from the scan by removing the '%"'. If any channels
were missed during auto tuner setup and you wish to add
them, you may by placing an "_'" next to the channel number.
A_' _
To the SCAN column
2
Press the OK button to include or delete from scan
Press the MENUbutton when finished
"/
MTV
03
05
04
C_,OsoA,ID
Q6
7"
07
'/
08
_K
7
E!
A&E
10
09
'/
HBO
L
How to set the channel label.
Press the MENUbutton
A_"
_11_
AY
To CHANNEL SUMMARY
To operate
To the ID column
CHANNEL
09
Press the OK button to enter
I_
AY
To select the character you want
To move to the next space
...continue to follow these directions
pRESS/_@TQ FINISH
for all four
spaces
(_D
Press the OK button to finish
Your characters are now set
(_
Press the MENUbutton when finished
If you want to reset the characters
you set:
(_
Press the MENU button
A_!'
4 t_
AY
To CHANNEL SUMMARY
To enter
To select RESET
(_
Press the OK button to finish
Your characters are now reset
Notes:
o You can use characters for: Alphabet, numbers, marks and spaces.
o It is possible to set the maximum of 40 channel labels.
o If you try to set more than the 40 maximum, the message "MEMORY
appear.
You can block access to a channel by activating the channel lock.
Press the MENU button
AY
To CHANNEL SUMMARY
4 t_
To operate
A_'4_
To the Lock Column ( I_ )
(_)
Press the ZERO button to lock or unlock that channel
(_
Press the MENU button when finished
OVERFLOW"
wilt
When
aviewer
attempts
towatch
aguarded
channel,
thefollowing
message
appears:
To
watch
achannel
that
youpad.
have
locked,
enter
the
/ THIS
Lock
Code
using
the
10key
CHANNEL
ISLOCKED
BY I
l
CHANNEL
If the wrong
"iNVALID
LOCK
codeCODEr
is entered,
will flash
the message
on the screen.
GUARD.
I
PLEASE10
KEY PADENTERTo
UNLocKLOCK
CODEIT, BY
The channel cannot be accessed until the correct code
is entered.
I
Notes:
o Once a channel has been unlocked, it wilt remain unlocked until the television
* See atso "Set Lock Code", page 39.
is turned off.
Your TV is equipped with V-Chip technology which enables you to block channels or content
that you feel to be inappropriate for children, based on US and Canada rating guidelines.
V-Chip has no effect on video signals from a DVD discs, VCR tapes or Camcorder connection.
Note: Some
programs, and movie s are broadcast
Without a ratings signal. Eyen if you set
up V-CHIP ratings limits, these programs wi! no t be blocked_ See Page 34 for information
hOW!o bl°ck unrat ed p[ograms:
Note (for Canadian viewers): The V-Chip function
on
is based on specification s designed fo r
[the Un ted States and therefore may not work proper y n Canada,
You can customize the V-Chip settings of your television to match your personal tastes. The
V-Chip menu below is the starting point for your V-Chip settings
You can use US V-Chip settings (for programming broadcast from the United States), Canadian
V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use
any or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting
each of the three V-Chip formats appear in the next six pages along with descriptions of the
rating categories.
To access the rating categories:
I2
Press the MENU button
,&Y
To V-CHIP
To operate (Lock icon _
12
,&Y
V-CHIP
wilt appear)
_OFF}
SET
US TV RATINGS
SET
MOVIE
RATINGS
Press ZERO to access the V-Chip menu
SET CANADIAN
RATINGS
ENG
SET CANADIAN
RATINGS
FRE
To turn V-Chip ON or OFF (V-Chip must be turned
ON for rating settings to operate)
UNRATED
To move to SET US TV RATINGS,
SET MOVIE RATINGS, or
SET CANADIAN RATINGS (see following pages for
descriptions of each item)
)
_VlEW
]
n
|
Unrated programming refers to any programming which does not contain a rating signal.
Programming on television stations which do not broadcast rating signals witl be placed in the
"Unrated Programming" category.
Examples of Unrated programs:
o Emergency Bulletins
o News
Public Service Announcements
o Sports
o Some Commercials
o
o
o
,
Locally Originated Programming
Political Programs
Religious Programs
Weather
Note:
• TV programs or movies that do not have rating signals will be blocked if the unrated category
is set to BLOCK.
You can block programs that are not rated.
(_
Press the MENU button
AT
To V-CHIP
41_
To operate (The lock icon I_1 appears)
!ill
t_ ii!!_ii!i!
_ii!i!
_ii!i!
_ii!i!
_ii!i!
_ii!i!
_ii!i!
_ii!i!
_ii!i!
_ii!i!
_i_
_i_
i_i_
i__i_
iiiii!!iiiil
VuCHIP
_OFF_
SET USTV RATINGS
SET MOVIE RATINGS
SET CANADIAN RATINGS ENG
Press ZERO to access V-Chip setup options
AY
To UNRATED
41_
To VIEW or BLOCK
Press MENUwhen done
SET CANADIAN RATINGS FRE
[UNRATED
_VIEW_
U.S. PARENTAL
Programs
RATING SYSTEMS
with the following
ratings
are appropriate
for children.
g
TV Y is Appropriate
for All Children
Programs are created for very young viewers and should be suitable for all ages, including
children ages 2 - 6.
g
TV Y7 is for Older Children
Most parents would find such programs suitable for children 7 and above. These programs
may contain some mild fantasy violence or comedic violence, which children should be able
to discern from reality.
Programs with the following
ratings are designed
TV G stands for General Audience
for the entire audience.
Most parents would find these programs suitable for all age groups. They contain little or no
violence, no strong language, and little or no sexual dialog or situations.
TV PG Parental Guidance Suggested
May contain some, but not much, strong language, limited violence, and some suggestive
sexual dialog or situations. It is recommended that parents watch these programs first, or
with their children.
g
TV 14 Parents Strongly Cautioned
Programs contain some material that may be unsuitable for children under the age of 14
including possible intense violence, sexual situations, strong coarse language, or intensely
suggestive dialog. Parents are cautioned against unattended viewing by children under I4.
g
TV MA Mature Audiences Only
These programs are specifically for adults and may be unsuitable for anyone
years of age. TV MA programs may have extensive V, S, L, or D.
Viewing
under 17
Guidelines
In addition to the ratings categories explained above information on specific kinds of coment
are also supplied with the V-Chip rating_ These types of conten[ q_ay also be blocked. The
content types are:
* VtFV is for VIOLENCE/FANTASY
- S stands for SEXUAL CONTENT
* L stands for strong LANGUAGE
, D stands for suggestive DIALOG
VIOLENCE
f2
Press the MENU button
,&Y
To V-CHIP
I V-CHIP
USTV
RATINGS
)
SET
MOVIE
RATINGS
)
SET
CANADIAN
RATINGS
ENG
)
SET
CANADIAN
RATINGS
FRE
)
To operate (lock icon _
12
Press ZERO to access the V-Chip menu
UNRATED
AT
To turn V-Chip ON or OFF
To move to SET US TV RATINGS
4_
To operate
4)"
appears)
_ OFF_
SET
4_
1
(VIEW)_
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and
press the AY or _
to move the cursor to the correct location. Press OK to turn the locking
feature on or off. An item is locked if the I_
icon appears instead of a "--".
For example. To block viewing of all TV I4 shows, move the cursor to the top row of that
column and add a tock icon. Once yodve put a tock on the top row, everything in that column
is automatically locked.
AY 4_
To the TV 14 Column
2
Press the OK button to lock
2
Press the MENUbutton when finished
Note:
• If you want to change the setup, move the cursor to the top
column and change the lock icon to "--" by pressing OK
again. You may then select individual categories to block.
I_ -
WFV-
_ ---
S
_ -
-
L i - a --
-
-
-
-
NR - Not Rated
This is a film which has no rating. In many cases these films were imported from countries
which do not use the MPAA ratings system. Other NR films may be from amateur producers
who didn't intend to have their film widely released.
NR (Not Rated) Programming may contain all types of programming
programming,
foreign programs, or adult material.
G - General
including
children's
Audience
In the opinion of the review board, these films contain nothing in the way of sexual content,
violence, or language that would be unsuitable for audiences of any age.
PG - Parental Guidance
Parental Guidance means the movie may contain some contents such as mild violence,
some brief nudity, and strong language. The contents are not deemed intense.
PG-13 - Parents Strongly Cautioned
Parents with children under 13 are cautioned that the content of movies with this rating may
include more explicit sexual, language, and violence content than movies rated PG.
R - Restricted
These films contain material that is explicit in nature and is not recommended
unsupervised children under the age of 17.
NC-!7 - No One Under 17
for
These movies contain content which most parents would feel is too adult for their children
to view. Content can consist of strong language, nudity, violence, and suggestive or explicit
subject matter.
X- No One under 18
Inappropriate
material for anyone under 18.
f2
Press the MENU button
AY
To V-CHIP
4 I_
To operate (Lock icon I_1 appears)
2
Press ZERO to access V-Chip setup options
AY
I_
To SET MOVIE RATINGS
To enter movies menu
For example:
To block viewing of X and NC-17 rated from shows:
AY 41_
To the X Column
2
Press the OK button to lock
,tk'Ir 41_
To the NC-17 Column
2
Press the OK button to lock
2
Press the MENU button to finish
e . .-
,
.-
E- Exempt
Exempt
programming
includes:
news,
sports,
documentaries
andother
information
programming,
talkshows,
music
videos,
andvariety
programming.
C - Programming
Intended for Children
Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or
unrealistic in nature.
08+ - Programming
intended for Children 8 and Over
Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low
intensity and will show the consequences of the acts. There wilt be no offensive language,
nudity or sexual content.
G - General Audience
Programming will contain little violence and will be sensitive to themes which could affect
younger children.
PG - Parental Guidance
Programming intended for a general audience, but which may not be suitable for younger
children. Parents may consider some content not appropriate for children aged 8-13.
14+ - 14 Years and Older
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and
early teens. Programming may contain mature themes and scenes of intense violence.
18+ - Adult
Material intended for mature audiences
(_
A,Y
Press the MENU button
To V-CHIP
4 _
To operate (lock icon
only.
appears)
Press ZEROto access V-Chip setup options
AY
4 _"
To SET CANADIAN RATINGS ENG (for English)
To enter ratings menu
For example:
To block viewing of programming
(_
rated I4+ and I8+:
ii
Press
button to lock
To the the
18+OK
Column
i
i
i
iI
To the 14+ Column
Press the OK button to lock
Press the MENU button to finish
Note:
• For instructions on "SET CANADIAN
French side of this user's guide.
RATINGS FRE (in French)", please see page 38 in the
Channel
guard
andV-Chip
settings
areprotected
byafour-digit
lockcode.
Your
TVcomes
preset
withalockcode
of"0000". You may change the code to any four-digit number you wish.
To change the tock code, follow the steps below.
12
Press the MENU button
_i!_i_ii_`i_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!
AV
To SET LOCK CODE
4 1_
To operate (lock icon I_1 appears)
12
Press ZERO to access the tock code
ILOCKCODE
The first digit will be highlighted
4 I_
To select the number
AT
To move to the next digit
Continue to follow these directions
I2
12
0000
PRESS _TO
8_
FINISH
_EP,
A:CE
for all four numbers
Press the OK button to finish (your lock code is now set)
Press the Menu button when finished
When a viewer attempts to watch a blocked channel, this message appears:
THiS
PROGRAMMING
EXCEED S 1
YOUR RATING LIMITS
I
PLEASE ENTER LOCK CODE BY
!0 KEy PAD TO UNLOCK IT,
The channel will remain blocked until the correct lock code is entered (see above for
information on setting your lock code).
Notes:
• After a power interruption you must reset the lock code.
• Write your lock code number down and keep it hidden from potential viewers.
• If you forget the tock code, a new code may be set using the steps listed above.
_
EXiT
g
_
m
•
•
•
_
o _
This TV has three color projection tubes: one for red, green,
in the proper portions, the output of these three color tubes
these colors, however, the beams must be precisely aligned
can be mixed. The produce of aligning these picture beams
and blue. When mixed together
can produce any color. To produce
over each other so that the colors
is called "convergence".
Attention:
° Please have your TV on for at least 20 minutes before using this feature.
° This adjustment will be needed only when the colors of the characters/lines
and tack in distinction. If not, please don't perform the adjustment.
Colors may become separated after the TV has been moved, or
over a long period of time if regularly subjected to tow levels of
vibrations. If the colors become separated, please perform the
adjustments below again, in the beginning,
please be sure to
perform AUTO convergence
adjustment.
are separated
AUTO
MAN
UAL
RESET
Press the MENU button
AY
To CONVERGENCE
To Enter
AY
To select "AUTO" (The convergence
start. It will take about 50 seconds).
adjustment
will
When the adjustment is finished, it wilt return to what you
were watching.
Note:
* You can reset the adjustment if you do not like the results. See the next page.
* If you want to adjust it more, you can perform the manual color convergence adjustment.
See the next page.
* You can also access this feature by pressing the SUPERFocus button on the front panel of
your TV.
OPEN
SUPER
FOCUS
D
_
e
e
!
II
II
•
_
II _
_
•
_
Press the MENU button
&y
4 t_
To CONVERGENCE
To Enter
&Y
41_
To choose MANUAL
To Enter
If all the lines are white, no convergence
adjustment
is
necessary.
If not, you need to perform the manual color
convergence below.
Select the location _ou want to adjust by using the
number buttons on the remote control.
,
.
_
You can select any of the 81 points.
(_
Press the SELECT button to change the color of the
box r _ to the color of the cross you wish to adjust (red or blue).
A'IP'41_
Adjust the position of the cross.
Adjust the three color crosses until they overlap and appear as a single white
cross.
Press the OK button
Notes:
o When you adjust the convergence, make sure you start with the center position (position 5),
and work your way around radially for best results.
o When you make the adjustment in the center (position 5), you are making the adjustment for
the whole screen. In other positions, you are making the adjustment only in that area.
o You can reset the adjustment if you do not like the results. See below.
o If you perform AUTO convergence after performing MANUAL convergence, your manual
convergence you performed wilt be cancelled.
RESET resets all convergence
(_
Press the MENU button
&T
•_111_
&_'
41_
To CONVERGENCE
To Enter
To RESET
To enter
When the adjustment
adjustments
to the factory default settings.
is reset, it will return to what you were watching.
Thisfunction
letsyoupreview
themany
different
viewing
modes
ofyourTV.Itwillcycle
through
"Multi
Screen
Demo",
"Picture
inPicture
Demo",
allofthedifferent
"Aspect" ratios and a!t of the
different "Video Status" modes.
Press the MENU button
PREVIOUS
AY
_
To AUTO DEMO
To turn AUTO DEMO ON or OFF
AUTO TUNER SETUP )
CHANNEL SUMMARY )
V-CHIP )
SET
Note:
LOCK
CODE
CONVERGENCE
• To stop auto demo, press the MENU button, and select
auto demo by pressing the AY buttons, and turn it off by
pressing the 4 I_ buttons. Press the MENUbutton to finish.
The language function is described on page 21 as the interactive
choose the language again, follow the steps below.
AUTO
DEMO
v NEXT
PAGE
_OFF
(4/4_
_.TE
EXI
plug-in menu. If you need to
Press the Menu button
Ay
To LANGUAGE
_ PREVIOUS
I LANGUAGE
4 _
To choose a language: ENG. (English), FRAN.
(French) or ESR (Spanish)
Press the MENUbutton when finished
CLOSED
ENG.
CAPTION
FRAN.
ESP.
)
AUTO SHUT OFF
_OFF
XDS ID
,qOFF_ I
NEXT
PAGE
(3/4)
•
_e
_
e
•
Many broadcasts now include an onscreen display of dialog called closed captions. Some
broadcasts may also include displays of additional information in text form. Your television can
access and display this information using the closed caption feature. To activate the closed
caption feature, follow the steps below.
(_
Press the MENU button
iii_iii!_@i_iiiiiii!iiiii%iii%iii%iiiiiiiiiii!
AT
To CLOSED CAPTION
4 I_
To operate
CAPTION
4 I_
To select CAPTION or TEXT in MODE
TEXT
IMODE
AY
To select CAPTION or TEXT
4 1_
To select a caption (CCl
(TI to T4)
(_
Press the OK button to save
to CC4) or text channel
_TEXT_
_CC1)_
_TI)
PRESS_TO
I
FINISH
Press the MENUbutton when finished
Notes:
. Closed caption subtitles are usually found on closed caption channel CCl. Some programs
may include additional text information which is usually found on text channel T1. The other
channels are available for future use.
. Closed captioning may not work correctly if the signal being received is weak or if you are
playing a video tape.
. Most broadcasts containing closed captioning will display a notice at the start of the program.
* To select the mode, press the C.C. button. See page 60.
•
o
This function automatically
TV is on.
shuts off your TV when there is no signal from the channel the
Press the MENU button
PREVIOUS
AT
(_
To AUTO SHUT OFF
To turn ON or OFF
Press the MENU button when finished
LANGUAGE
CLOSED
! AUTO SHUT OFF
XDS ID
• If the channel that you have on does not receive a
signal for more than one minute, the blinking text
"NOT RECEIVING A SIGNALAUTO
SHUT OFF IN 9 MIN/'
appears on the screen, and starts the countdown. If no
signal is being received within 10 minutes, the TV shuts itself off.
v NEXT
FRAN. ESP.
CAPTION)
PAGE
4OFF)
(OFF) I
II
Ii
XDS ID Display provides a channel's call letters, the network's name, and even a program
name. The XDS ID information is provided by the broadcaster.
(_
Press the MENUbutton
A.T
41_"
To XDS ID
To turn ON or OFF
PREVIOUS
LANGUAGE
CLOSED
AUTO
(_
Press the MENUbutton when finished
FRAN.
SHUT
OFF
{ 0FE_ w.
PAGE
(3/4)
This feature inserts a blank grey screen over channels which are not broadcasting
weak to be received clearly.
I2
Press the MENUbutton
AT
To NOISE MUTING
or are too
PREVIOUS
To turn noise muting ON or OFF
12
_ OFF_
XDS ID
NEXT
ESP.
CAPTION_
Press the MENUbutton when finished
NOISE MUTING
FRONT PANEL LOCK
4ON
{OFF) _
VI SMART INPUT
iOFFI
VIDEO INPUT LABEL
POSITION ADJUSTMENT
POWER INDICATOR
{HIGH
v NEXT PAGE
(2/4)
Note:
• Noise muting will not work during auto tuner setup or when
you operate channel summary.
•
_
"
•
This allows you to lock the keys on the front of the TV, so that a child may not accidentally
change your viewing preferences.
2
Press the MENUbutton
AT
4 _
To FRONT PANEL LOCK
To turn ON or OFF
PREVIOUS
NOISE
MUTING
FRONT
PANEL
Vl
2
Press the MENUbutton when finished
SMART
VIDEO
. Unplug the power cord, and plug it back in. Do this if your
batteries die, or you lose your remote control.
POWER
NEXT
INPUT
INPUT
POSITION
You can turn off this feature in the following ways:
{ON_
LOCK
{OFF
_j
!OFFi
LABEL
ADJUSTMENT
INDICATOR
PAGE
4HIGH
(2/41
* Use the remote control.
Press the MENU button on the front of the TV for more than 3 seconds. In this case, the OSD
for FRONT PANEL LOCK will appear.
Note:
. To turn ON/OFF the TV, press the power button for more than 3 seconds. This feature will
remain ON.
.
o
This feature is used if you have connected an AV Receiver to your television. By turning this
feature on, your television can automatically detect the signal source from your components
that are connected to your AV Receiver.
f2
Press the MENUbutton
PREVIOUS
To Vl SMART INPUT
To turn ON or OFF
AT
12
NOISE
MUTING
FRONT
Vl
Press the MENU button when finished
SMART
VIDEO
v NEXT
_OFF_
LABEL
ADJUSTMENT
POWER
• If you do not have an AV Receiver connected to your
television, turn this feature OFF. By doing so, you can take
advantage of using AV CompuLink components with your
television.
_ OFF
INPUT
INPUT
POSITION
Notes:
4ON_
PAN EL LOCK
INDICATOR
_HIGH
PAGE
(2/4)
• Some AV Receivers may not work with this function.
e-o
o
.
o"
This function is used to label video input connections
12
Press the MENU button
AY
To VIDEO INPUT LABEL
for the onscreen
PREVIOUS
To operate
AY
12
12
displays.
NOISE
MUTING
FRONT
PANEL
VI
SMART
To select the desired video input
VIDEO
To select the desired preset input label (see
chart below)
POWER
INPUT
POSITION
NEXT
{ON)
LOCK
{OFF_
INPUT
{OFF_
LABEL
ADJUSTMENT
INDICATOR
}
_HIGH
PAGE
(2/4)
Press the OK button to save
Press the MENUbutton when finished
VIDEO-I
VCR
VIDEO-2
DVD
VIDEO-3
SAT
VIDEO-4
GAME
DIGITAL-IN
:;,_l:BCT_,_RaT_
.........
Preset
Labels
Select
when,,,
VCR
You have
a VCR connected
to the video
input
DVD
You have
a DVD connected
to the video
input
D-VHS
You have
a Digital
STB
You have
a Set4op
SAT
You have
a Satellite
AMP
You have
an Amplifier
GAME
You have
a Video
Game
CAM
You have
a Video
Camera
DISC
You have
a Video
Disc
VCR connected
to the video
input
Box connected
to the video
input
Receiver
connected
connected
connected
connected
input
input
to the video
connected
player
to the video
to the video
to the video
input
input
to the video
input
STB
mO
•
_ e
Position adjustment allows you to adjust the position of the picture on the screen vertically
when the aspect is set to panorama, cinema, or full.
A
Press the MENUbutton
A_"
4 I_
To POSITION ADJUSTMENT
To enter
A_' 4t1_ To adjust the position
I
Press the MENU button to finish
Y
Notes:
0P
• To reset the adjustment to the center, press the OK button.
• When the arrow disappears, while you are adjusting the position, the position is at it%
maximum limit.
• If you select regular size with aspect or Multi Screen, position adjustment option is not seen.
• When you change the screen size, perform the position adjustment again.
• Position adjustment allows you to adjust the screen position vertically and horizontally when
the aspect is set HD panorama or cinema zoom for I080i and 720p signals.
b
•
"
e
_
•
Power indicator allows you to adjust the brightness of the
power indicator
Press the MENU button
PREVIOUS
NOISE MUTING
FRONT PANEL LOCK
tONi
4OFF
VI
tOFF_
SMART
VIDEO
A_'
4 1_"
To POWER INDICATOR
To adjust POWER INDICATOR LOW, HIGH or OFF
INPUT
POSITION
POWER
" NEXT
INPUT
LABEL
ADJUSTMENT
INDICATOR
PAGE
Notes :
• When OFF is selected :
The LED disappears if you have a TV signal.
The LED is tit as "LOW" when there is no TV signal.
• When the On Timer turns ON, the LED is lit as "LOW" when you turn the power off.
_HIGH
(2/4_
D
0
.
The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a HDMI480p
picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when
a HDMI or DVl 480p picture signal is being displayed on the screen. There are two types of
HDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the
position can be adjusted by selecting either SIZE1 or SIZE2.
(_
Press the MENUbutton
,AY
To DIGITAL-IN
4 _
To enter
411_
To select SIZE1 or SIZE2
PREVIOUS
I DIGITAL-IN
DIGITAL-IN
CENTER
( SIZE1
AUDIO
CH INPUT
_ DIGITAL_
_OFFk
Press the MENUbutton to finish
v NEXT
PAGE
(1/4)
Note:
* The DIGITAL-IN menu can only be displayed when a HDMI or DVI 480p picture signal is
input to the Digital-In terminal and the picture is being displayed on the screen.
This feature is used if you have a DTV or HDMI compatible
component connected to your TV.
_' PREVIOUS
DIGITAL-IN
(_D
Press the MENUbutton
AY
To DIGITAL-IN AUDIO
4 _
To select "ANALOG" or "DIGITAL"
(_
Press the Menu button when finished
DIGITAL-IN
_ SIZE1
AUDIO
CENTER CH INPUT
v NEXT
_ DIGITAL
F
_OFF_ )
PAGE
Notes:
• If your DTV or HDMI component is capable of digital audio and video, choose DIGITAL. If
your DTV or HDMI component is capable of analog audio and digital video, choose ANALOG.
• Refer to your DTV or HDMI component's
instruction
manual for more information.
When
youareusing
asurround
system,
youcansubstitute
thespeaker
ofthistelevision
for
thecenter
speaker
ofyousurround
system.
SetCENTER
CHINPUT
toONwhen
youusethe
speaker
asthecenter
speaker
ofyoursurround
system.
12
Press the MENU button
,&V
To CENTER CH INPUT
To adjust CENTER CH INPUT to "ON" or "OFF"
I2
Press the MENUbutton when finished
'_PREVIOUS
DIGITAL-IN
DIGITAL-IN
_ SIZE1
AUDIO
_ DIGITAL
CENTER CH INPUT
v NEXT
PAGE
_S£L_CT2_'
_OFF_
(1/4)
ATE
:EXi
)
"
"
o
These settings allow you to change and adjust the way the picture appears on your television.
TINT
Tint allows you to adjust the levels of red and green in your TV picture.
COLOR
The color function lets you make all the colors in the TV picture appear either more vivid or
subtle.
PICTURE
Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker
or brighter picture overall.
BRIGHT
You can adjust the overall brightness
of the TV picture with the Bright control.
DETAIL
The Detail feature adjusts the level of fine detail displayed in the picture.
(_
Press the MENU button
AT"
To TINT, COLOR, PICTURE,
DETAIL
To enter
4
_
BRIGHT or
PREVIOUS
( 00
COLOR
_ O0 _
PICTURE
{ O0 )
BRIGHT
_00_
DETAIL
_ O0 )
COLOR
4 I_
&Y
To adjust the setting
To move to the next setting
(_
Press the MENU button when finished
STANDARD
TINT
NEXT
)
_
TEMPERATURE
I
4 LOW
PAGE
_
I
(1/2)
You can decide how strong or dull the colors appear on the TV screen.
(_
Press the MENUbutton
&Y
_
To COLOR TEMPERATURE
TO enter
4_"
To set LOW or HIGH
_PREVIOUS
TINT
_00
COLOR
_ oo
PICTURE
4 00 )
BRIGHT
4 O0
DETAIL
COLOR
Press the MENU button when finished
STANDARD
_00)
_
I
_
_
TEMPERATURE
NEXT PAGE
I
_ LOW
(1/2_
With digital noise clear+ this helps take our static or noise from a channel that may not be
coming in clearly.
(_
AY
4 _
Press the MENUbutton
To DIG. NOISE CLEAR
To enter
&Y
To select the mode +'LOW", "HIGH" or +'OFF"
(_
Press the MENUbutton when finished
"
•
+
•
_
+
•
Velocity scan modulation circuitry varies the electron beam's horizontal scanning speed to hetp
accentuate the differences in picture brightness to sharpen the edges of images.
(_
&Y
_
Press the MENU button
To VSM
To enter
_- PREVIOUS
I VSM
NATURAL
VSM
_
STANDARD
DIG. NOISE CLEAR _
OFF
_ON
CINEMA
_
AUTO
_
ON OFF I
To turn VSM ON or OFF
RESET
+ NEXT
PAGE
(2/2)
Natural cinema corrects the problem of blurred edges which may occur when viewing a program
originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges
of these programs, choose NATURALCINEMAand set it to AUTO. Natural Cinema helps correct
conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the
television rate of 30 frames-per-second.
f2
Press the MENUbutton
AV
To NATURAL CINEMA
To enter
AY
To select the mode "AUTO", "ON" or "OFF"
12
Press the MENUbutton when finished
Notes:
The natural cinema mode is automatically set to "AUTO" in the following cases:
• Turning on or off
• Changing the channel or input mode
• Using multi-screen functions
AUTO
oO+ i
Reset
resets
allpicture
adjustments
(tint,color,
picture,
bright,
detail,
color
temperature,
dig.
noise
clear
andVSM)
atonce
tothedefault
settings.
I2
,&T
4_
Press the MENU button
To RESET
To enter
The onscreen menu disappears for a moment, and
then the settings are reset to the default setting for
aft the picture adjustments.
12
Press the MENU button when finished
PREVIOUS
STANDARD
DIG. N01SE
I_ISMuRAL
CLEAR_
C,NEMA
OFF
,
A 'uON ' t
I RESET
v NEXT
PAGE
(2/2_
I
•
o
"
o
These settings allow you to change and adjust the sound on your television.
BASS - You can increase or decrease
the bass adjustment.
the level of low-frequency
TREBLE - Use treble to adjust the level of high-frequency
BALANCE
sound in the TV's audio with
sound in your TV's audio.
- Adjust the level of sound between the TV's left and right speakers with the
balance setting.
AY
4 I_
A_"
Press the MENU button
To BASS, TREBLE or BALANCE
To adjust the setting
To move to the next setting
(_
Press the MENU button when finished
PREVIOUS
IBASS
_oo _
TREBLE
_00_
1'
BALANCE 4 00 }
J
MTS
_
SAP
RESET
NEXT
Note:
PAGE
's
* You can reset the sound adjustments (BASS, TREBLE and
BALANCE) you set at once as the default setting when you select reset. See page 51.
. You can adjust BALANCE only when A.HS. is off. See page 58.
-
-
-
ii
it
e
MTS technology allows several audio signals to be broadcast at once, giving you a choice
in what you wish to hear with a TV program. In addition to mono or stereo sound, an
MTS broadcast may also include a second audio program (SAP).
(_
Press the MENUbutton
AY
To MTS
I_
PREVIOUS
Select the mode
(The ON AIR arrow tells you if a broadcast
contains an SAP).
(_
is in stereo and/or
Press the MENU button when finished
BASS
TREBLE
_ 00
00 _
_
BALANCE
_ 00
IMTS
_
I
SAPMONO
RESET
v NEXT PAGE
:_*:SE
t
Notes:
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono sound only.
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
• MTS unavailable if your television's input source is in input 1, 2, 3 or 4 mode, as described
on page 57.
Reset resets all Sound Adjustments
See page 51 on how to use reset.
(Bass, Treble and Balance) at once to the default settings.
Thesetclock
function
isdescribed
onpage
23astheinteractive
plug-in
menu.
Youcanchoose
tosettheclock
automatically,
ormanually.
Ifyouneed
tosettheclock
again,
follow
thesteps
below.
(_
AY
I_
Press
theMENU
button
ToSET
CLOCK
Tooperate
When
yousettheclockautomatically,
choose
AY
I_
AUTO by pressing
the 4 or _ arrows.
To TIME ZONE
To select your time zone
ATLANTIC "(-_
_
EASTER N _
HAWAII H
CENTRAL _
ALASKA H
MOUNTAIN
PACIFIC _
I MODE
_ AUTO)
TIME
-- : ....
TIME
AY
To D.S.T. (daylight savings time)
4_
To turn D S.T ON or OFF
12
Press OK to finish
12
Press the MENU button when finished
When you set the clock
AY
manually,
ZONE
_ ATLANTIC
D.S.T.
)
_ ON
PRESS ¢_,'TO FINISH
choose
MANUAL by pressing
the _ or _ arrows.
To move to the hour
To set the hour
AY
To move to minutes
4_
To set the minutes
f2
Press OK to start clock
TIME ZONE
TIME
D.S.T.
PRESS_TO
I
12
FMODE
THANK YOU !!
_MANUAL _
_ATLANTIC
-- :----_l
,_ON
START CLOCK
I
Press the MENU button when finished
Notes:
* D.S.T. can be used onty for US and Canada when it is set to ON in the SET CLOCK menu.
* Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts
your TV's clock for Daylight Savings. The clock will move forward one hour at 2:00 am on
the first Sunday in April. The ctock wilt move back one hour at 2:00 am on the tast Sunday in
October.
* You will have to reset the clock after a power interruption.
operating any timer functions.
You must set the clock before
II
g
The on/off timer lets you program your television to turn itself on or off. You can use it as an
alarm to wake up, to help you remember important programs, or as a decoy when you're not
home.
(_
Press the MENU button
AT
To ON/OFF TIMER
411_
To operate (begins with ON TIME)
i_ ii_i_:_iii1iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i11iiiii_ii_i_
ii
ON
T
41_
To set the hour (AM/PM) you want the TV to turn on
To set the minutes
To accept ON TIME and move to OFF TIME (the
time the TV will turn off). Set the OFF TIME the
same way as ON TIME
T
To accept OFF TIME and move to CHANNEL
To select channel
T
To ON VOLUME
41_
T
41_
T
CURRENT
't EVERYDAY)
PRESS_TO
T
PM
03
VOLUME
MODE
ON/OFF TIMER
To move to minutes
41_
7:00
10:00 PM
CHANNEL
ON
41_
TIME
OFF TIME
_NO )
FINISH
To set the volume level
To move to MODE
Choose ONCE or EVERYDAY
To ON/OFF TIMER
Choose YES to accept the timer setting, choose NO if you don't wish to accept
Press the OK button to finish
Press the MENU button to exit the menu
Notes:
* The on/off time cannot be set to locked or guarded channels.
* In order for the on/off timer to work, the clock must be set.
* After a power interruption,
the timer settings must be reset.
I
= =
•
Your television has two kinds of screen: TWIN (2 channels) and INDEX (12 channels).
Note:
After you press any multiscreen
adjust screen will appear.
button, if you press the menu button, only the picture
o =
This allows you to quickly look at up to 12 channels at a time so that you can decide which one
to watch.
1
2
3
4
5
6
7
8
9
10
11
12
Notes:
• Only RF input signal will be displayed.
• You can watch the channel added in channel summary.
See page 31.
Activate the split-screen option by pressing TWIN on
the remote control. The channel (or input) you were
watching before pressing TWIN will appear on the left,
the new channel wilt appear on the right. The sound
will continue to come from the main screen channel
(or input). To turn split-screen off and return to
normal television viewing, press TWiN again or press
the BACK button.
Notes:
• Ma_n Screen and Split Screen wH_not d_splay the same channel or input at the same bme.
- You can enter the TWIN mode when the screen is in NORMAL or INDEX mode.
. Split-screen functions will not work with locked channels or channels blocked by V-Chip
ratings limits. A grey screen will display instead.
• With split screen, the uicture from the component
not be displayed.
terminal and DIGITAL-IN terminal will
- ]-he aspect of MAIN CHANNEL PICTURE becomes 16:9 when you input the picture of
480p, 720p and 1080i from the component _ermlnal and DIGITAL-IN terminal.
. After you press the SELECTbuttor and select SPLIT SCREEN when you press the
OK button, select normal screen If you don't operate the MAIN CHANNEL SCREEN wl!l
ae automatically selected about 8 seconds later.
• Aspect does not work in Twin mode.
- When you press the Menu button in Twin mode, it appears only as Picture Adjust menu.
Pressing
theFREEZE
button
causes
thescreen
tochange
tothesplit-screen
display
withthestill
picture
displayed
ontheright.
Inorder
toreturn
tothenormal
display,
press
theFREEZE
button
once
again.
Note:When
thescreen
isinfreeze
mode,
ifyoudonotoperate
itwithin
15minutes,
this
function
willcancel
out.
o
You can exchange the channel (or input) displayed in the split screen window for the main
screen image by pressing the SWAPbutton.
With SELECT, you can select the picture (channel) while viewing SPLIT screen. When you
press SELECTbutton, the channel number on the top wilt be highlighted. Each press of SELECT
will shift the channel.
b
•
Turns the TV on or off.
(_
Press the POWERbutton
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel I2:
(_D
0 (Zero)
1 (One)
2 (Two)
Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the TUNE button. For example, to move to channel 12:
(_
1 (One)
(_
2 (Two)
(_
Press the TUNE button
Selects the signal input source for the television:
devices like VCR% DVD players, or camcorders.
Input-l,
2, 3, 4 or DIGIATL-IN for video
Press the INPUTbutton
By every press of the INPUTbutton, you can change the input mode.
Notes:
• When you return to TV mode, press the RETURN+ button or direct 10 key pad.
• You can also access the FRONT CONTROL PANEL screen by using the MENU button on
the front of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose
INPUT by pressing MENUY on the front panel and choose a mode by using the CHANNEL+/buttons ( 4 OPERATE _ ).
Use these buttons to move up or down all the available channels your TV is able to receive.
o
Use these buttons to raise or lower the TV's volume level.
TheRETURN+
button
hastwofunctions:
Return
-Returns
tothechannel
viewed
justbefore
thechannel
currently
onscreen.
Return+
-Letsyouprogram
aspecific
channel
toreturn
towhile
scanning
through
the
channels
using
theCH+andCH-buttons.
(_
RETURN+
andholdforthree
seconds
Thechannel
currently
active
hasbeen
programmed
asyourreturn+
channel.
Nowscan
through
thechannels
using
theCHANNEL+/-buttons.
(_
RETURN+
You wilt return to your programmed
channel.
• To cancel your return+ channel, press and hold the RETURN+button for three seconds. The
message "RETURN CHANNEL CANCELLEDr' wilt appear.
• Return+ works only with the Channel+/- buttons. Pressing any number key wilt cancel
return+.
•
o
Note : SMART SOUND (AV-56P58_ ONLY)
By pressing the SOUND button, you can change the A.HS.
BBE, and SMART SOUND on or off.
(Advanced
Hyper Surround) mode,
A.H.S. - Adds a more spacious surround sound. Music gives basic effect and movie for more
effect.
BBE - BBE High Definition Sound restores clarity and presence for better speech intelligibility
and musical realism.
SMART SOUND - Decreases
high sound levels, giving a regulated sound level•
Press the SOUND button
A_"
4 1_"
To select A.H.S., BBE or SMART SOUND
To choose the setting
(_
Press the MENU when finished
• Note:
Manufactured
Under license from BBE Sound, inc. Licensed by BBE-Sound,
Inc. under USP4638258,
5510752 and 5736897:
aBE and BBE symb0! ar e reg!stered
I trademarks of BEE Sound, Inc.
The MUTINGbutton instantly turns the volume down completely when you press it. Press
MUTINGand the volume level will instantly go to zero. To restore the volume to its previous
level, press MUTINGagain.
I
o _ •
The VIDEOSTATUSbutton gives you a choice of four TV picture display settings, including a
display of your own preferences.
Standard
- Resets the picture display to the factory settings.
Dynamic
- Gives a vivid picture with better contrast when viewing in
a brightly lit room.
Theater - Gives a rich, film-like took to video when viewing in a
dimly tit room.
Game - Used for when you are playing video games connected to
your TV.
STANDARD_
DYNAMIC|
THEATER|
GAME|
Press the VIDEOSTATUSbutton
By every press of the VIDEOSTATUSbutton, you change the mode.
Note:
You can also change the mode by pressing the AT buttons.
• You can also access the FRONT CONTROL PANEL screen by using the MENU button on
the front of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose
VIDEO STATUS by pressing MENUV on the front panel and choose a mode by using the
CHANNEL+/- buttons ( _ OPERATE I_ ).
-o
-
•
oil;
tl
The TheaterPro D6500K color temperature technology function makes sure that the video you
watch is set to the standard color temperature, so that what you see is as true to what the film
to video editors intended it to be.
(_
Press the THEATERPRObutton
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals
of 15 minutes, for a total time of up to I80 minutes.
(_
Press the SLEEPTIMERbutton
0 15 30 45 60 75 90 105 120 135 150 165 180 _]
Sleep Timer Message
20 seconds before the automatic shutoff, this message will appear:
You then have 20 seconds to press the SLEEPTIMER button to
delay the shut off for another I5 minutes.
Thedisplay
screen
shows
thecurrent
status
oftimers,
inputs,
andXDSID.
Press
theDISPLAY
button
Thescreen
totherightshows
thefollowing
information:
o The current channel orAV input (Channel 05)
o The current time (12:20 pm)
o Sleep timer status/minutes remaining (The Sleep Timer
is off)
o On/off timer status (Set to turn on everyday at 7:00 PM,
off at 10:00 PM)
. Each Press of the DISPLAYbutton changes the display
mode:
Display -_Time
-_
JAZZ
FESTIVAL
NOW
12:20 PM
SLEEP
TIMER
ON/OFF
ON TIME
OFF
Channel-_
OFF
TIMER
EVERYDAY
7:00
TIME
PM
10:00 PM
Off _]
Display - Full screen shown above
Time - Shows the current time only
Channel
- Shows the current channel
Off - Turns display off
Notes:
o You may also turn off the display at any step by pressing MENU.
o If the clock, sleep timer or on/off timer are not set, the display screen will show:
"CLOCK NOT SET", "SLEEP TIMER OFF", and "ON/OFF TIMER OFF" respectively.
•
_o
.
o
•
Use the C.C. (Closed Caption) button to select the mode of closed caption.
Press the C.C. button
AV-56P585 ONLY
OFF
AV-56P575
_
SMART
and AV-48P575
OFF
CAPTION
_
ON _]
ONLY
---_ ON _]
Smart Caption will appear when you press the MUTINGbutton, only on channels where the
broadcast contains closed captioning. (AV-56P585 ONLY)
When you select ON, it will be the mode selected in the Closed Caption Menu.
See page 43 when you set the caption/text
mode.
Thisfeature
willhelpyouadjust
thepicture
youarewatching
togiveyouthebestpossible
picture
quality.
PANORAMA
- Withthisratioanormal
4:3aspect
picture
isstretched
tofitthe
dimensions
ofthe16:9
aspect
screen.
REGULAR
- The regular ratio is used
when you want to watch a 4:3 broadcast
or recorded program without modifying the
original picture to fit the dimensions of your
16:9 screen. The 4:3 picture will fill the
screen from top to bottom, while black bars
will appear to fill up the remaining space
along the picture's sides. The 4:3 picture
will be centered within the boundaries of the
16:9 screen.
CINEMA
-Thisratio"zooms
in"onthe
center
partofa4:3aspect
picture,
blowing
ituptofilltheI6:9screen.
CINEMA ZOOM - This ratio stretches
FULL - This is the ratio to use when
watching
I6:9 High-Definition
HD PANORAMA
broadcasts.
- This ratio stretches
the High-Definition 16:9 aspect image to
eliminate the black side bars.
the High-Definition 16:9 aspect image to
eliminate the black surrounding bars.
Press
theASPECT
button
• By pressing the ASPECTbutton,
you can change the size.
When you change the aspect ratios, it is different from their broadcast
NTSC, 480i, 480p
or recorded program.
HD (1080i, 720p)
Notes:
• You can also choose the size by pressing the AT
buttons.
• When you change the aspect ratio or signal, reset the picture position to center.
• You can also access the FRONT CONTROL PANEL screen by using the MENU button on
the front of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose
ASPECT by pressing MENUY on the front panel and choose a mode by using the CHANNEL
+/- buttons ( _ OPERATE I_ ).
The MENU button allows you to access JVC% onscreen
the onscreen menu system.
menu system. Press MENUto activate
• See individual topics like "Sound Adjust" for specific information
on using menus.
This button confirms your selection when you are in one of the onscreen menus.
This button allows you to go back in the menu to change a selection or correct a mistake.
Useeither
thetelevision's
owntuner
oracable
boxtoselect
channels.
Setthisswitch
toTVto
operate
thetelevision's
built-in
tuner,
Move
theswitch
toCATV
tooperate
acable
box.
Note:
* See page 24 for information
"
II
II
o-
on programming
your remote for cable box operation.
-
You can control a VCR or DVD player with the buttons on the lower part of the remote control.
Move the slide switch to VCR or DVB to operate.
Notes:
• The remote is preset with the code 000 to control JVC-brand VCR%. For any other
manufacturer's brand VCR, please see the code chart and instructions on page 25.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer's brand DVD player, please see the code chart and instructions on page 26.
You can use this remote control to operate the basic functions of your VCR. These functions
include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and
power off.
Move the selector switch to VCR to operate.
• The remote is preset with the code 000 to control JVC-brand VCR%. For any other
manufacturer's brand VCR, please see the code chart and instructions on page 25.
II
I
_,
•
You can also use this remote control to operate the basic functions of your DVD player. These
functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,
power on, and power off.
Move the selector switch to I::)VD to operate.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer's brand DVD player, please see the code chart and instructions on page 26.
All remote control buttons are illuminated, except for the TV/CATV slide switch, VCR/DVD slide
switch and Light button. Press the LIGHTbutton to turn the illumination on for 4 seconds.
•
_
•
This button is only located on the front panel of your TV. When you press the SUPER Focus
button on the front of the TV, you can access the auto convergence mode in the convergence
menu screen automatically. See page 40.
IftheTVchannel
youselected,
orwere
watching
isnotreceiving
asignal,
"NOPROGRAM"
appears
onthetelevision
screen.
Itappears
when
thatchannel
isnotreceiving
asignal
andyou
have
theNoise
Muting
function
OFFandyouhave
asingle
screen.
Itmoves
automatically
every
twoseconds
toprevent
thescreen
from
burn-in.
Seepage
6.
Note:
• Even
if"NOPROGRAM"
appears
onthescreen,
yourtimer
functions
andautoshutoff
functions
thatyouset,arestillactive.
There
is no power
• See if the power
cord became
unplugged.
• Check for a blown fuse or circuit breaker
There
is no picture
• The antenna
or sound
,The
could
input mode
Remote
control
operating
is not
properly
or
outage.
be disconnected.
could
be set improperly.
• The tuner (Auto Tuner Setup)
• The TV station
or a power
could
may be having
difficulties.
• Check to see that the batteries
• Make sure the remote
See page 57.
be set improperly.
are still working
has a clear
See page 31.
Check to see if other stations
and properly
are working.
installed.
sight path to the TV.
at all
• Check that the TV/CATV switch is in the proper position.
• You may be too far from the TV. You must be within 23 feet (7 meters).
You cannot select a
certain channel
• Make sure the channels have been programmed.
See "Channel Summary",
page 31.
• Check to see if the channel is locked. See "Channel
Summary
- Lock" page 32.
The power
• Make sure the set did not become
turns off
by itself
• Perhaps
the On/Off
Timer
unplugged.
is set. See page 54.
• Check to see if the Sleep Timer
was set. See page 59.
The clock is wrong
• The power was interrupted
The color quality
is poor
,Tint and Color may be improperly
adjusted. See page 49.
• The Video Status mode may be turned to the wrong setting.
There
,There
are lines
across
the picture
The picture
is spotted
could
another
be interference
TV or VCR.
are double
pictures
(ghosts)
Picture
is snowy
(image
noise)
Screen
is 40% black
from another
electrical
Move any such appliances
• A building
slightly
,Your
which
or passing
delayed
antenna
connection.
one.
is less prone
airplane
Adjust
• The Closed
Caption
can reflect
appliance, like a hairdryer or vacuum,
the appliance
or change to a coaxial
the original
signal and produce
or turned.
replace
Check the antenna
it.
is on. Turn it off in the Closed
Stereo or bilingual
programs
can't be
heard
• Make sure the MTS settings
are correct.
There is no sound
from the TV's
• The Center CH Input may be turned
on.
a second,
position.
disconnected
is damaged,
Text mode
such as a computer,
away from the TV.
to interference.
your antenna
may be damaged,
If the antenna
See page 59.
appliance,
further
• There could be interference
from a high-wattage
operating nearby. Move the antenna away from
cable connection
There
and the clock was not reset. See page 53.
Caption
Menu,
page 43.
See page 52.
See page 48.
speaker
Static
electricity
You hear occasional
crackling
sounds
The AUTO DEMO
finished automatically
• It is normal
to feel static electricity
• It is normal
the sound
if you brush
for the TV to make crackling
or picture become
abnormal,
that the AUTO
DEMO
is using
• The Auto Shut Off that you programed
and blinking
appears
sounds
when first turned
on or off. Unless
this is fine.
• The TV recieved a signal from the AV CompuLink
• The On Timer that you programmed
has started.
• The channel
The square
or touch the screen.
• It appears
when
be a problem
you are operating
is a channel
that is blocked
the Auto Convergence.
with the Auto Convergence.
by V-Chip.
has occured.
Contact
a service
If not, then this may
agent.
iJVC
LiMiTED WARRANTY
COLO_
TV_4 .
_r I
For Canadian model televisions,
see separate sheets for Canadian Warranty information.
-k JVC COMPANY
OF AMERICA (JVC) warrants
this product and aft parts thereof, except as set forth below
TO THE ORIGINAL RETAIL PURCHASER
to be FREE FROM DEFECTIVE MATERIALS
AND WORKMANSHIP
the date of original purchase for the period shown below. ("The Warranty
Period")
1
THiS LiMiTED WARRANTY
iN THE COMMONWEALTH
WHAT
YEAR
1
JS VALID ONLY JN THE FJPTY (50) UNITED
OF PUERTO RICO.
1
ONLY
from
_r
-_
Yr
YEAR
STATES, THE
DJSTR|CT OF COLUMBIA
AND
WE WiLL DO:
If this product is found to be defective within the warranty period, JVC will repair or replace defective parts with new or
rebuilt equivalents
at no charge to the original owner. Such repair and replacement
services shall be rendered by JVC
_-
during normal business hours at JVC authorized service centers.
Parts used for replacement
are warranted only for the
remainder of the Warranty Period. All products may be brought to a JVC authorized service center on a carry-in basis.
_ Color televisions
with a screen size of 27" or greater qualify for in-home service. Jn such cases, a technician will come
_.
_
to your home and either repair the TV there or remove
i
and return it if it cannot
be repaired
in your home.
WHAT YOU MUST DO FOR WARRANTY
SERVICE:
Please do not return your product to the retailer
instead, return your product to the JVC authorized
service center nearest you. if shipping the product to the service
center, please be sure to package it carefully, preferably in the original packaging, and include a brief description of
_
the problern(s). Please call 1-800-252-5722
to locate the nearest JVC authorized
service center. Service locations
can also be obtained from our wehsite http://www.jvc.com,
if your product qualifies
for in=heine service, the service
representative
will require
-k jf you have any questions
800-252-5722
clear access
concerning
to the product.
your
JVC
Product,
please
contact
our Customer
Relations
Department
at
WHAT JS NOT COVERED:
This limited warranty
provided
by JVC does not cover:
1. Products which have been subject to abuse, accident, alteration, modification,
tampering,
negligence, misuse, faulty
installation,
lack of reasonable
care, or if repaired or serviced by anyone other than a service facility authorized
by
JVC to render such service, or if affixed to any attachment
not provided with the products, or if the model or serial
number has been altered, tampered with, defaced or removed;
2. initial installation,
installation and removal from cabinets or mounting systems.
Yr 3. Operational
adjustments
covered in the OwneCs Manual, normal
4. Damage that occurs in shipment,
due to act of God, and cosmetic
5. Signal reception
problems and failures due to line power surge;
•
maintenance,
damage;
video
and audio
head cleaning;
6. Video Pick-up Tubes/COD image Sensors are covered for 90 days from the date of purchase;
7. Accessories;
8. Batteries (except that Rechargeable
Batteries are covered for 90 days from the date of purchase);
9. Products used for commercial
purposes,
including, but not limited to rental.
_r There
are no express
warranties
except
,
*
_.
-k
*
as listed above.
_r THE DURATION OF ANY IMPLIED WARRANTIES,
INCLUDING THE IMPLIED WARRANTY
_ LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
OF MERCHANTASlLITY,
JS
JVC SHALL NOT SE UASLE
FOR ANY LOSS OF USE OF THE PRODUCT,
iNCONVIENCE,
OR ANY OTHER
-k DAMAGES,
WHETHER
DIRECT,
iNCIDENTAL
OR CONSEQUENTAL
(iNCLUDING,
WITHOUT
LIMITATION,
-_- DAMAGE TO TAPES, RECORDS OR DISCS) RESULTING
FROM THE USE OF THIS PRODUCT,
OR ARISING OUT
_r OF ANY BREACH
-k WARRANTIES
OF
WARRANTY
OF THiS WARRANTY.
MERCHANTABIUTY
AND
PERIOD
SET FORTH
ALL EXPRESS
F_TNESS FOR
AND IMPLIED
WARRANTIES,
PARTICULAR
PURPOSE,
ARE
iNCLUDING
THE
LIMITED
TO THE
Some states do not allow the exclusion
of incidental
or consequential
damages
or limitations
on how long an
_r implied warranty
lasts, so these limitations
or exclusions
may not apply to you. This warranty
gives you specific
legal rights and you may also have other rights which vary from state to state.
Yr
•
JVC COMPANY OF AMERICA
1700 Valley Road
DIVISION OF JVC AMERICAS CORP.
Wayne, NJ 07470
-k
http://www.jvc.com
REFURBISHED
PRODUCTS
CARRY A SEPARATE WARRANTY,
THIS WARRANTY DOES NOT APPLY.
OF REFURBISHED
PRODUCT
WARRANTY,
PLEASE
REFER TO THE REFURBISHED
PRODUCT
_NFORMATJON PACKAGED WITH EACH REFURBISHED
PRODUCT.
For customer
FOR DETAIL
WARRANTY
use:
Enter below the Model No. and Serial No. which
Retain this information for future reference.
Model
No. :
Purchase
date :
._
-k
ABOVE.
is located
either on the rear, bottom
Serial
No. :
Name
of dealer
:
or side of the cabinet,
_"
*
TO OUR VALUED CUSTOMER
THANK
YOU FOR
WE WANT
PURCHASING
TO HELP YOU ACHEVE
THIS JVC PRODUCT.
A PERFECT
EXPERIENCE.
NEED HELP ON HOWTO HOOK UP?
NEED ASSISTANCE
ON HOWTO OPERATE?
NEED TO LOCATE A JVC SERVICE CENTER?
LiKE TO PURCHASE ACCESSORIES?
®
IS HERE TO HELP!
TOLL FREE: 1(800)252-5722
http://www.jvc.com
Remember
to retain
your
Bill of Sale for Warranty
Service.
Do not attempt to service the product yourself
Caution
To prevent electrical shock, do not open the cabinet.
There are no user serviceable parts inside.
Please refer to qualified service personnel for repairs.
Model
N
AV.48P575
Type
Rear
Reception
Format
Reception
Range
Power
Power
AV-56P585
AV-56P575
NTSC,
BTSC
HDTV
Projection
System (Multi-Channel
Sound)
digital broadcast
ready.
VHF 2 to 13, UHF 14 to 69 Sub, Mid, Super, Hyper and Ultra bands
(180 channel frequency
synthesizer
system)
Source
AC 120V, 60 Hz
Consumption
Screen
Television
Size
248W
48 inch / 122 cm
66 inch / 142 cm
measured
diagonally,
16:9 ratio
measured
diagonally,
16:9 ratio
Speakers
Audio
Antenna
External
13 cm round
Output
Full Range
Terminal
Input
Y: lVp-p
positive,
Jack
Y: lVp-p
Audio
Output
(FIX)
500mVrms
(-4dBs)
Low impedance
(in)
(1000
3.5 mm mini jack
HDMI jack x 1
Note: The Digital-In
personal
computer
W X H X D (cm)
terminal
120 x 118,9
(Ibs / kg)
provided)
subject to change
with picture
signals
x 129.6
176 / 80
remote
notice.
100%)
X 1
136,8
159 / 72
without
modulated
of a
53 7/8 x 51 1/8 x 26 3/8
x 62.2
Illuminated
Hz when
is not compatible
47 1/4 x 46 7/8 x 24 1/2
Accessories
Specifications
sync
75 ohms
positive, 75 ohms (negative sync provided)
C: 0.286 Vp-p (burst signal), 75 ohms
III
Digital-In
Dimensions
(negative
0.7 Vp-p
Jacks
AV CompuLink
Jack
Weight
75 ohms
Pb/Pr:
Input Jacks
connector)
Video: 1 Vp-p, 75 ohms
500 mVrms (-4dBs) high impedance
Audio:
S-Video
- lOW + lOW
75 ohms (VHF/UHF)(F-type
Input Jacks
Component
X 2
control
unit / AA batteries
X 2
x 66,7
JVCCOMPANY
OFAMERICA
Division
ofJVCAmericas
Corp.
1700ValleyRoad
Wayne,
NewJersey,
07470
JVC CANADA, INC.
21 Finchdene Square
Scarborough, Ontario
Canada, M1X 1A7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising