INSTRUCTIONS Panel Introduction 10 9 1. / SRC Button 2. MUTE Button 3. DBAS Button 4. VOL- Button 5. VOL+ Button 6. 7. RESET Button 8. USB Slot 9. Remote Control Receiver 10. AUX External Input BASIC FUNCTION 1. / SRC button If unit is off: Press this button to power on the unit. If unit is on: Long press this button to power off Short press to cycle thru modes. INSTRUCTIONS BASE 12 2. MUTE button Press this button to shut off the sound output, re-press this button can resume the sound output, long press this button can turn off the TFT LCD display. 3. DBAS button Press this button to bass on/off. 4. VOL- button Press this button to reduce the volume. 11. SD slot 5. VOL+ button Press this button to increase the volume. 6. Press this button can eject the disc. 7. RESET button Press this button and this unit will be restored to the initial state. 8. Dual (front and rear) USB Insert USB removable device so as to read audio/video files. Warning: You can only use either front or rear USB at a time. Never connect both front and rear USB at the same time! This could cause malfunctions. 9. Remote control receiver It is able of receiving infrared signals launched by the remote control matching the unit. 10. Dual (front and rear) AUX To input external audio. Warning: You can only use either front or rear AUX at a time. Never connect both front and rear AUX at the same time. 12. Disc slot 13. Slot indicator light 13 11 Remote Control Operation INSTRUCTIONS 3. SOURCE Button Press this button to change mode. 28 4. EQ Button Press this button to choose POP、ROCK、 CLASSIC、EQ off. AMS / RPT MUTE TITLE SOURCE AUDIO EQ GO TO SEEK+ / SEEK- SUBTITLE VOL+ / VOL- PBC SEL UP / DOWN / L / R ENTER LOUD SLOW BAND / P / N ANGLE LOC / RDM SETUP STOP OSD PLAY / PAUSE ZOOM ST / PROG MENU 0-10+ DSP 2. MUTE Button Press once to turn off audio output, press again to resume volume level. 24. SETUP Button In audio mode, press this button to choose different set items. 15. AMS / RPT Button In radio mode, press this button to browse stored stations. In audio mode, press this button to play repeatedly. 6. VOL+ ( ) / VOL- ( ) Press this button to increase or decrease volume level. 16. TITLE Button In DVD mode, press this button to play back to the top menu of disc. 26. ZOOM Button In DVD/VCD mode, press this button to ZOOM in. 7. SEL Button Press this button to choose sound feature. 17. AUDIO Button In DVD mode, press this button to switch language of dialogue. In VCD mode, press this button to choose left track、right track and stereo. 27. MENU Button Press button to back to the main menu. 18. GO TO Button In DVD mode, press this button, you can define playing time. BATTERY CHANGE When control distance of remote control becomes shorter or no function, please change battery. Please confirm polarity before change. 9. BAND-P/N Button In radio mode, press this button to choose band. In VCD、DVD mode, press this button to choose PAL 、AUTO or NTSC system. 10. LOC / RDM Button In radio mode, press this button to switch between local and direction. In VCD、CD mode, press this key to randomly play. 11. STOP Button Press this button to stop playing. 12. PLAY / PAUSE Button Press this button to switch between play and pause. In stop mode, press this button to play. 1. POWER Button Press once to switch on, press again to switch off. 23. ANGLE Button In DVD mode, press this button to change play angle. 5. SEEK+ ( ) / SEEK-( ) Button In normal playback MP3、USB、SD songs, Press this button to previous song or next song. 8. LOUD Button Press this button to startup LOUD function. POWER ON/OFF 14. 0-10+ Button Press this button to choose desired song、 section、preset stations. Decimal numbers, for example the 19th song, press 10+ and 9 button. 13. ST / PROG Button In radio mode, press this button to choose stereo or mono station. In audio mode, it can help STOP button to programmed play. 19. SUBTITLE Button In DVD mode, press this button to switch language of subtitle. 25. OSD Display Press this button to display the title chapter and the left time. 28. DSP Press this button to show the time. One hand press stopper, then pull out battery. 20. PBC Button In VCD mode, press this button to display all song menus, work with number button to choose songs. 21. UP、DOWN、LEFT、 RIGHT、ENTER Put battery into controller. Button When playing MP3、USB、SD returns to song menu, up、down selections can be up / " " button or down / " " key to select up and down, select and press " " key to confirm. Insert battery holder into controller. The selected tracks can be played. Press the left or right arrow keys to " " or " " key, can be on the next page function operation. 22. SLOW Button In audio mode, press this button to slow backward and slow forward. Turn on/off Radio Operation When the ignition switch is put in ACC or ON position, Press [ ] button on the front panel to turn on the unit. After the host starts, hold [ ] button for 3 seconds, the host will turn off. 1. Enter/exit Touch [Radio] icon in the main interface to enter into the radio interface. Touch icon to return to main interface, and then touch other function icons so as to exit radio mode. Access main interface Note: To adjust the angle of the screen, “Angle Up” and “Angle Down” are marked respectively in each location for different sources. Turned on, the interface to return the icon to switch to the main interface. As shown below: 2. MUTE on/off Click icon to switch MUTE on and off. angle up angle down 3. Loudness on/off Click icon so as to turn on/off loudness function. angle up Touch the function icons so as to access the corresponding function operations. Touch the [ ] icon or use the touch pen/finger gently sliding around the screen to switch to the main menu page. USB/SD Card Operation When there is a USB device/SD card connected, the unit can conduct the playback of audio/video/image files in the USB device/SD card. Insert/Eject USB storage device 1. Connect a U disc recorded with media information to the unit by a USB connecting cable. 2. When there is a need to eject the USB device, exit the USB device playback screen first, and then take out the device. Insert/eject SD card 1. Insert a SD card recorded with media information into the SD card slot in the unit correctly until it is locked. 2. When pulling out the SD card, exit SD card playing state first, then press the SD card and it shall pop up after unlocking. 4. Search/Save radio stations Short press icon to browse the stored radio stations. FM band can save 18 radio stations (Six stations for FM1/FM2/FM3), AM band can save 12 radio stations (Six stations for AM1/AM2). angle down 5. Band selection Click icon so as to switch among FM1, FM2, FM3, AM1, AM2 bands. 6.Turn on/off the Long/Short-range Click icon, the search pattern in the local search (LOC) and remote search (DX) switch between. LOC feature is turned on after the signal is strong enough only to listen to those in good condition and receiving radio station; DX enabled, you can receive remote weak radio signals. Note: This function is available only when FM band is selected. 7. Stereo on/off When receiving stereo signals, click icon to turn on/off stereo. 8. TA (Receive traffic information) ON: When the traffic station is turned on, the radio will automatically search for traffic stations. After a station is searched, screen displays “TP”. Only when traffic information is broadcasted can it be received, after traffic information is completed, the radio will automatically switch to the previous mode. OFF: Repress [TA] button to close TA function. In other modes, traffic announcement will automatically switch to radio mode, after the traffic announcement is completed, it will automatically switch to the previous mode. Enter/exit Insert a USB storage device or SD card to automatically play data contained in it. If the unit has connected with a USB device or SD card, touch [USB] icon in the multimedia interface to enter into the external storage playback interface; Touch [SD] icon to enter into the SD card playback interface. During playback, touch the top center area of the screen to pop up the touch menu, operate touch menu to perform various playback controls. 9. AF Touch the button to turn the AF function on/off. AF function is turned on, When the received station signals become weak, the radio will automatically fine-tune to other frequencies. When receiving an emergency announcing, the screen will display warning message. Play After SD card/USB removable device being read out, the operation methods are similar to disk operation methods. 10. PTY Touch the button the screen displays program types, users can search station according to program type. Note: If the unit does not have RDS function, it has no AF/TA/PTY function. Disc Operation INSTRUCTIONS 1. Play/eject disc Play disc Insert the disc into the disc slot with the printing surface up, system will detect the disc and automatically take it in to read and play. Eject disc (1) Click button on the panel to eject the disc. (2) If a disc has not been took away 15 seconds after it is ejected, system will automatically take in the disc but not play. Do not insert two discs or more. Return to root menu Touch this icon, it shall return to root menu of disk in DVD state and access PBC menu playing in VCD state. All chapters in the disk shall be displayed on the interface, touch the chapter icon directly for playing. 2. DVD/VCD disc playback During playback of disc, touch the middle lower area of the screen to pop up the touch menu, operate the touch menu to perform various playback controls. (PIC 1) Repeat play In playing state, touch this button to start repeat play function: Chapter repeat → Title repeat →Repeat All → Off During VCD playing, this function only works when PBC is off. TT 1/1 3. CD Disc Playback After a CD is inserted, system shall access disk reading state immediately. When there is a disk in the device, click [Disk] at the main interface so as to access disk reading state. After the disk being read out, system shall automatically play in sequence. CH 1/48 x angle up angle down VOL Language selection Touch this button to select language. 26 00: 01 : 44 00: 09: 43 PIC 1 4. MP3/JPEG/MPEG4 disk playing When the disk contains readable files, such as MP3/JPEG/MPEG4 files, it shall be automatically read out and played after slipping into DVD player. During playing, touch the screen area and the touch menu shall pop up. Operate the touch menu for various playing. x TT 1/1 CH 1/48 5. Touch Menu Function Description MUTE Touch this icon to switch MUTE on and off. Play/pause Touch the button to pause, retouch it to continue to play. angle up angle down 00: 01 : 44 VOL 26 00: 09: 43 Stop Touch the button to enter into pre stop status. Fast forward/backward Consecutively touch this button to select the speed of fast-forward/fast-backward. The previous/next song Touch the button to select the previous/next song. Access next menu Touch it to access the next menu interface. Disc Touch this icon to eject disc. Stereo on/off Touch it so as to turn on/off stereo. Access title menu Press this button to return to title menu of the disk. Directly click menu bar at title menu interface for playing. Digit keyboard Touch this button and digit keyboard shall appear, click number buttons directly to select tracks for playing. Switch play order Touch this button to switch the play order. Zoom in/Zoom out image Touch this button to zoom in /zoom out the image. Under audio/video playing mode or radio mode, the screen center will display the picture below when adjusting the volume button. VOL 26 Setting Touch this button to enter setting interface EQ Touch this icon to display EQ mode one by one for selecting. EQ OFF POP ROCK CLASS Note: To adjust the angle of the screen, “Angle Up” and “Angle Down” are marked respectively in each location for different sources. ST. Wheel setting 1. Click on the [ ] icon in the main interface into the SWC. settings interface. 2. The original vehicle to the control line positive, negative with the machine control line in the positive and negative connection. 3. Click the SWC buttons will appear corresponding operating tips, and fundamental operation prompts the SWC feature set. 4. Set function to save the settings and click the Confirm icon to confirm. Note: To modify function settings, repeat procedures 3~4. To reset functions, click Reset icon, all the settings set before shall be cleared, repeat procedures 3~4 for resetting. Other Operation Rear view function In any running state, the video signal can switch to reverse video state when reversing the car, and the system shall return to its initial running state after reversing the car. Warning Do not rely on CCD system completely, please make sure you use direct eyesight while driving. Back rearview system only assists in driving. As the distance range of rearview system is limited, completely relying on the rearview system during driving may cause accidents. External input operation Connect the video input plug with external video input jack, and connect the audio input plug with external audio input jack. Touch [AUX-IN] icon on main interface to access external AUX-IN interface. angle up angle down Audio →You can adjust the volume, bass, pitch for input audio. You can adjust the speaker volume by adjusting the front and back, left and right column. Video →You can adjust the brightness, contrast, saturation and hue for input video. You can also choose the video standard mode. Note: To adjust the angle of the screen, “Angle Up” and “Angle Down” are marked respectively in each location for different sources. Calendar Touch the icon [ ] in main interface to enter thefollowing Calendar interface: Calculator Touch the icon [ ]in main interface to enter calculator interface to operate ＋/－/×/÷ Reverse field simulation Rearview backup image Access setup interface INSTRUCTIONS Version Click [Setting] icon on main interface to access setup interface. Touch the icon [ ]in setting interface to enter the interface below to check the software version number of DISC/MCU/TFT (The version information is displayed please prevail in kind.) General setting Click icon on setup interface to access general setting interface, as shown in below PIC 1 diagram: In General setting interface, you may set the functions On or Off, or click the icon [ ]to preview the wallpapers up and down and set your favorite wallpaper Touch calibration PIC 1 Wallpaper Touch the icon[ ]in wallpaper bar[ If the touch position is biased, you may touch the icon “Calibrate” for calibration. Touch the icon[ ]in setting interface to find the setting bar[ and then touch any icon[ ]to enter the following calibrating interface. ], ]to change the wallpaper. Audio setting 十 Click icon on setup interface to access audio setting interface, as shown in right (PIC 2) diagram: You can turn on or turn off the existing functions on audio setting interface and adjust the rearview volume. PIC 2 Video setting Click icon on setup interface to access video setting interface, as shown in right (PIC 3) diagram: At video setting interface, you can adjust brightness, contrast, saturation and hue of the video. Language setting PIC 3 During use, you can select your familiar language to display menu by language setup. Click icon on setup interface to access language setting interface, as shown in right (PIC 4) diagram: In the languagebar [ ] you need to set, touch the correspondingicon[ ]to select your familiar language. PIC 4 Time setting Click icon on setup interface to access time setting interface.as shown in right (PIC 5) diagram: Touch the icon [ ]of Time mode, Year, Month, Date, Hour, Minute for setting. PIC 5 Touching methods Use touch pen to click the center of “+” icon, and move along with center of “+” icon so as to calibrate the screen. It shall automatically save data and exit after screen calibration. Please accurately click all positions on screen, or the accuracy of touch calibration shall be affected. Touch screen Calibration WIRING DIAGRAM Please follow the below instructions to calibrate when there is no touch or touch is not accurate. Step 1: Press the mode button in the unit to switch to DVD mode. Step 2: Insert a DVD disc, after DVD is loaded, press the stop button “ ” as show in picture (1). in the remote short, the unit will display as show in picture (2). Picture ( 1 ) Step 3: Press “ picture (4). This player is equipped with ISO standard connector, please follow below instruction: Red - ACC ON (+12V) Yellow – 12 V Constant ● Black – Ground wire ● Blue - Power Antenna / Remote Amp Turn On ● Violet/White-Reverse Gear Signal (+) Grey/Grey black - Right front speaker (+/-) White/White black - Left front speaker (+/-) ● Purple/Purple black - Right rear speaker (+/-) ● Green/Green black - Left rear speaker (+/-) ● Light Green-Parking Brake (-) ●Blue/White – (Remote control for Amplifier) ● ● ● ● Picture ( 2 ) ” in the remote as show in picture (3), the unit will display as show in TROUBLE SHOOTING Picture ( 3 ) Picture ( 4 ) Step 4: Press “ ” button in the remote and then quickly press “ ” button as show in picture (5) and you will enter the touch calibration interface as show in picture (6). Picture ( 5 ) Picture ( 6 ) Step 5: Use the touch pen to touch top left corner, top right corner, down right corner, down left corner, when the cross cursor stop at each corner, touch the center of the cursor. Then the panel will display OK and leave the calibration interface and the unit regained touch as show in picture (7). Picture ( 7 ) PROBLEM Cannot power on CAUSE SOLUTION Check fuse Change fuse same as the old one Some factors cause MPU wrong operation Press RES button on the panel by penpoint, then, power on After ignition switch Change battery or fuse off, setting information all lose Reset information and save Poor performance Weak signal of radio station Move the car to another place, then research Cannot load disk There is a disk inside Remove disc before inserting another one Disc is scratched Change new disc Cannot play disc Put wrong side of disc into the unit Insert in the disk with sign side up Lens is dirty Clean lens by lens clean disc Cannot switch language/subtitle There is only one language/ subtitle in disc If disc is not with multi-language/subtitle, it cannot switch language/subtitle No image Other factors cause MPU wrong operation Press RES button on the panel by penpoint, then, power on Cannot watch image during driving Park the car in a safe place, put the car stall It’s not allowed to watch image in “ P ” postion, pull up the hand brake, during driving parking brake wire must be grounded INSTRUCTIONS INSTRUCTIONS SPECIFICATIONS ACCESSORY Power supply DC 12V Power range 10.8-16.0V DC Max Current Consumption 15A Ground system Negative ground Power Output 85 WattsX4 Channels FM tuner US frequency range 87.5-107.9MHz European frequency range 87.5-108MHz Signal / Noise ratio 55dB Stereo separation 30dB Search station volt 20-30dBuv AM tuner US frequency range European frequency range Limit noise sensitivity Accessory Quantity Wire 1PC USB Cable 1PC Keys 2PCS Remote controller 1PC Warranty card 2PCS Car Stereos 530-1710KHz 522-1620KHz DVD Parental control function 32dB DVD Parental control function DVD player S / N Ratio 70dB Frequency response 20Hz-20KHz DVD Parental control function: The default set for DVD is #8 adult, which means all grades of DVD can be read without entering password. To change the default grade, you need to follow the below procedure: Press SETUP button on the remote, display will show the system set up menu and the submenu, select password and enter 0000, you will be able to choose the DVD grade as default. Shop for other double DIN stereo receivers on our website.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project