User manual
Televisions
5000 series
55PFL5601
Register your product and get support at
www.philips.com/welcome
EN
EN User Manual
•
ES Manual del Usuario
ES
FR Manuel d’Utilisation
•
FR
•
For further assistance, call the customer support service in your
country.
To obtain assistance, contact Philips Customer Care Center;
In the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands
1 866 202 5960
México D.F. and Área Metropolitana; 58 87 97 36
Interior de la Republica; 01 800 839 19 89
Para obtener más información, llame al servicio de soporte al cliente
de su país.
Para obtener asistencia, comuníquese con Centro de atención al
cliente de Philips;
En los Estados Unidos, en Canadá, Puerto Rico o en las Islas Vírgenes
de los Estados Unidos; 1 866 202 5960
México D.F. y Área Metropolitana; 58 87 97 36
Interior de la Republica; 01 800 839 19 89
Pour obtenir de l’aide supplémentaire, communiquez avec le centre
de service à la clientèle de votre pays.
Pour obtenir de l’aide, communiquez avec le centre de service à la
clientèle Philips au;
Dans le États-Unis, au Canada, à Puerto Rico ou aux Îles Vierges
américaines; 1 866 202 5960
México D.F. et Área Metropolitana; 58 87 97 36
Interior de la Republica; 01 800 839 19 89
2 .English
Contents
1
Notice ....................................................................................... 5
2
Important ............................................................................... 7
Positioning the TV
Regulatory notices
Environmental care
Batteries usage
Preparing to move / ship the unit
3
8
8
8
9
9
9
10
11
11
12
12
13
13
17
Use your TV ....................................................................... 19
Switching on your TV and putting it in standby mode
Adjusting volume
Switching channels
Watching channels from an external device
Access the Home menu
Create a list of favorite channels
Changing Picture format
TV screen information
Using options menu
USB
5
7
7
7
7
7
Getting started ................................................................... 8
Features
Supplied accessories
Symbols used in this User manual
Stand assembly
Attaching the base
Installing the remote control batteries
Remote control
Control panel
Terminals
Connecting Antenna or Cable / Satellite / IPTV set-top box
Plugging in the AC power cord
Selecting your connection quality
Connecting your devices
Initial setup
4
Search for channels
Install channels
Channel settings
Channel installation
Child lock
Change PIN
Digital audio language
Mono/Stereo
Connect to network
Wireless setting
Wired setting
Network settings
Manual network settings
Connection test
Setting status
Home network
Wake-on-LAN(DIAL)
Net TV
Samba interactive TV settings
Reset network settings
Update software
Preparing for the software upgrade
Downloading the software
USB upgrade
Network updates
Software settings
Software
Wireless Screencasting
View photos, play music and watch videos using home
network
Net TV
Pandora operations
19
19
19
20
20
21
21
22
23
24
6
45
48
49
Useful tips .......................................................................... 50
FAQ
Troubleshooting tips
7
35
35
35
35
36
37
37
37
38
38
38
39
39
41
41
42
42
42
42
42
43
43
43
43
44
44
44
45
50
51
Information ......................................................................... 53
Glossary
Maintenance
53
53
Getting more from your TV ...................................... 27
Picture and sound setup
TV settings
Picture
Sound
Features
Installation
28
28
28
30
31
32
• Displays and illustrations may differ depending on the product you purchase.
8
Specifications ................................................................... 54
9
Warranty ............................................................................. 55
License .......................................................................................... end of book
3 .English
Register online today at www.philips.com/welcome today
to get the most benefits from your purchase.
Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out.
Register Online at www.philips.com/welcome to ensure:
*Product safety notification
By registering your product, you'll receive
notification - directly from the manufacturer - in
the rare case of a product recall or safety defect.
Know these safety symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear or bottom of the cabinet.
*Additional benefits
Registering your product guarantees that you'll
receive all of the privileges to which you're
entitled, including special money-saving offers.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the apparatus’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the apparatus.
WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
CAUTION:
ATTENTION:
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Pour éviter les choc électriques,introduire la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu’au fond.
For fastest support visit us online for chat and self service
solutions at www.philips.com/support
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES
• Manufacturers, retailers and the rest of the consumer
electronics industry are committed to making home
entertainment safe and enjoyable.
• As you enjoy your television, please note that all
televisions – new and old- must be supported on
proper stands or installed according to the
manufacturer’s recommendations. Televisions that are
inappropriately situated on dressers, bookcases,
shelves, desks, speakers, chests, carts, etc., may fall
over, resulting in injury.
TUNE IN TO SAFETY
• ALWAYS follow the manufacturer’s recommendations
for the safe installation of your television.
• ALWAYS read and follow all instructions for proper
use of your television.
• NEVER allow children to climb on or play on the
television or the furniture on which the television is
placed.
• NEVER place the television on furniture that can
easily be used as steps, such as a chest of drawers.
• ALWAYS install the television where it cannot be
pushed, pulled over or knocked down.
• ALWAYS route cords and cables connected to the
television so that they cannot be tripped over, pulled
or grabbed.
WALL OR CEILING MOUNT YOUR TELEVISION
• ALWAYS contact your retailer about professional
installation if you have any doubts about your ability
to safely mount your television.
• ALWAYS use a mount that has been recommended
by the television manufacturer and has a safety
certification by an independent laboratory (such as
UL, CSA, ETL).
• ALWAYS follow all instructions supplied by the
television and mount manufacturers.
• ALWAYS make sure that the wall or ceiling where you
are mounting the television is appropriate. Some
mounts are not designed to be mounted to walls and
ceilings with steel studs or cinder block construction.
If you are unsure, contact a professional installer.
• Televisions can be heavy. A minimum of two people
is required for a wall or ceiling mount installation.
MOVING AN OLDER TELEVISION TO A NEW PLACE
IN YOUR HOME
• Many new television buyers move their older CRT
televisions into a secondary room after the purchase
of a flat-panel television. Special care should be
made in the placement of older CRT televisions.
• ALWAYS place your older CRT television on furniture
that is sturdy and appropriate for its size and weight.
• NEVER place your older CRT television on a dresser
where children may be tempted to use the drawers
to climb.
• ALWAYS make sure your older CRT television does
not hang over the edge of your furniture.
4 .English
Important safety instructions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
1 1.
12.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized
or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Only use attachments / accessories specified by
the manufacturer.
Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart / apparatus combination
to avoid injury from tip-over.
Wall mount bracket kit
55PFL5601
Brand
Model #
Screw dimension
SANUS
PLA50B
M6 x 0.472” (12mm)
• Your TV meets the VESA standard for wall mounting. Consult with your
•
•
•
•
local dealer for a wall mount bracket which is compatible with your TV
model.
The recommended wall mount bracket kit (sold separately) allows the
mounting of the TV on the wall.
For detailed information on installing the wall mount, refer to the wall
mount Instruction book.
Funai is not responsible for any damage to the product or injury to
yourself or others if you elect to install the TV wall mount bracket or
mount the TV onto the bracket on your own.
The wall mount bracket must be installed by experts.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Note to the CATV system installer:
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
Example of antenna grounding as per NEC National Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
ELECTRIC SERVICE EQUIPMENT
POWER SERVICE GROUNDING
ELECTRODE SYSTEM (NEC ART 250,
PART H)
Funai is not liable for these types of accidents or injuries noted below.
• Install the wall mount bracket on a sturdy vertical wall.
• If installed onto a ceiling or slanted wall, the TV and wall mount bracket
may fall which could result in a severe injury.
• Do not use screws that are longer or shorter than their specified length.
If screws too long are used this may cause mechanical or electrical
damage inside the TV set. If screws too short are used this may cause
the TV set to fall.
• Do not fasten the screws by excessive force. This may damage the
product or cause the product to fall, leading to an injury.
• For safety reasons use 2 people to mount the TV onto a wall mounting
bracket.
• Do not mount the TV onto the wall mounting bracket while your TV is
plugged in or turned on. It may result in an electrical shock injury.
When installing the unit on the wall, allow this much space.
Top
: 1 1.8 inches (30cm)
Left and right side
: 5.9 inches (15cm)
Bottom
: 3.9 inches (10cm)
5 .English
1 Notice
Modifications
Trademarks are the property of Koninklijke Philips N.V. or
their respective owners.
Funai reserves the right to change products at any time
without being obliged to adjust earlier supplies accordingly.
The material in this Owner’s Manual is believed adequate
for the intended use of the system. If the product or its
individual modules or procedures are used for purposes
other than those specified herein, confirmation of their
validity and suitability must be obtained. Funai warrants
that the material itself does not infringe any United States
patents. No further warranty is expressed or implied.
Funai cannot be held responsible neither for any errors in
the content of this document nor for any problems as a
result of the content in this document. Errors reported to
Funai will be adapted and published on the Funai support
website as soon as possible.
Pixel characteristics
This LCD product has a high number of color pixels.
Although it has effective pixels of 99.999% or more, black
dots or bright points of light (red, green or blue) may
appear constantly on the screen. This is a structural
property of the display (within common industry standards)
and is not a malfunction.
Warranty
No components are user serviceable. Do not open or
remove covers to the inside of the product. Repairs may
only be done by Service Centers and official repair shops.
Failure to do so shall void any warranty, stated or implied.
Any operation expressly prohibited in this manual, any
adjustments or assembly procedures not recommended or
authorized in this manual shall void the warranty.
Federal Communications Commission Notice
This equipment has been tested and found to comply with
the limits for a Class B Digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio or
television technician for help.
Declaration of conformity
Trade name
: PHILIPS
Responsible party
: FUNAI CORPORATION, Inc.
Model
: 55PFL5601
Address
: 19900 Van Ness Avenue, Torrance, CA 90501
U.S.A.
: 1 866 202 5960
Telephone number
This apparatus may generate or use radio frequency energy.
Changes or Modifications to this apparatus may cause
harmful interference.
Any Modifications to the apparatus must be Approved by
Funai.
The user could lose the authority to operate this apparatus if
an unauthorized Change or Modification is made.
Cables
Connections to this device must be made with shielded
cables with metallic RFI / EMI connector hoods to maintain
compliance with FCC Rules and Regulations.
FCC statutory notice for Wireless LAN adapter.
FCC Caution: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
this equipment.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Country Code Statement
For product available in the USA market, only channel
1∼1 1 can be operated. Selection of other channels is not
possible.
To maintain compliance with FCC RF exposure
requirements, use only belt-clips, holsters or similar
accessories that do not contain metallic components in
its assembly. The use of accessories that do not satisfy
these requirements may not comply with FCC RF
exposure requirements and should be avoided.
6 .English
Copyright
All other registered and unregistered trademarks are the
property of their respective owners.
Netflix is available in certain countries.
Streaming membership required.
More information at www.netflix.com.
The terms HDMI and HDMI HighDefinition Multimedia Interface, and
the HDMI Logo are trademarks or
registered trademarks of HDMI
Licensing Administrator, Inc. in the
United States and other countries.
VUDUTM is a trademark of
VUDU, Inc.
Manufactured under license
from Dolby Laboratories.
Dolby and the double-D
symbol are trademarks of
Dolby Laboratories.
YouTube and the YouTube logo
are trademarks of Google Inc.
Sonic Emotion and the Sonic
Emotion logo symbol are
registered trademarks of sonic
emotion ag.
PANDORA, the PANDORA logo,
and the Pandora trade dress
are trademarks or registered
trademarks of Pandora Media,
Inc. Used with permission.
Hotlist, Samba, Samba TV and
associated logos are
trademarks of Free Stream
Media Corp.
Portions of this software are copyright © The FreeType Project
(www.freetype.org).
The American Academy of Pediatrics discourages television
viewing for children younger than two years of age.
Some features may require an always-on broadband internet
connection, firmware update and/or a minimum bandwidth. Internet
services vary by location.
FUNAI CORPORATION, Inc. does not warrant access to the portal or to
any of the services, content, software and advertising. FUNAI
CORPORATION, Inc. or third party content/service providers may, in
their sole discretion, add or remove access to any specific services,
content, software and advertising at any time. Although FUNAI
CORPORATION, Inc. will strive to provide a good selection of services,
content or software, FUNAI CORPORATION, Inc. does not warrant
continued access to any specific services, and content or software.
FUNAI CORPORATION, Inc. does not warrant Wireless Screencasting
compatibility with all source devices such as smartphones, tablets,
laptops, etc. due to large variability in hardware, firmware, drivers,
software and implementation of wireless casting applications on these
source devices. Although FUNAI CORPORATION, Inc. will strive to
enhance compatibility and performance across a range of source
devices, FUNAI CORPORATION, Inc. does not warrant compatibility
with specific source devices.
7 .English
2 Important
Environmental care
Positioning the TV
•
•
•
•
•
•
•
•
•
•
•
•
•
Large screen TVs are heavy. 2 people are required to
carry and handle a large screen TV.
Make sure to hold the upper and
bottom frames of the Unit firmly as
illustrated.
Install the Unit in a horizontal and
stable position.
Do not install the Unit in direct
sunlight or in a place subject to
dust or strong vibration.
Depending on the environment,
the temperature of this Unit may
increase slightly. This is not a malfunction.
Avoid a place with drastic temperature changes.
Do not place anything directly on top or bottom of the
Unit.
Depending on your external devices, noise or
disturbance of the picture and / or sound may be
generated if the Unit is placed too close to them. In this
case, please ensure enough space between the external
devices and the Unit.
Do not insert the AC power cord into the power socket
outlet before all the connections are made.
Ensure that you always have easy access to the AC
Power Cord and Outlet to disconnect the TV from the AC
Outlet.
Before you move the TV, disconnect attached Cables to
prevent damage to Connectors, especially the TV Tuner.
Be sure to Unplug the AC Power Plug from the AC outlet
before moving or carrying the Unit.
When moving the TV and then Setting it down, please be
careful not to pinch the AC Power Cord under the Unit.
Regulatory notices
Do not place the unit on the furniture that is capable of being
tilted by a child and an adult leaning, pulling, standing or climbing
on it. A falling unit can cause serious injury or even death.
This apparatus should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided.
Make sure to leave a space of 4 inches (10cm) or more around this
apparatus.
Press to turn the unit On and go into Standby mode.
To completely turn Off the unit, you must unplug the AC power
Plug from the AC Power Outlet.
Disconnect the AC Power Plug to shut the unit Off when trouble is
found or not in use. The AC Plug shall remain readily available.
AC power plug
Never use a gas duster on this TV.
The gas trapped inside of this unit may cause ignition and explosion.
CAUTION:
WARNING:
WARNING:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Batteries (battery pack or battery installed) should
not be exposed to excessive heat such as sunshine,
fire or the like.
To prevent injury, this apparatus must be securely
attached to the furniture / wall in accordance with
the instructions. Tipping, shaking or rocking the unit
may cause injury / death.
The packaging of this product is intended to be recycled.
Contact your local authorities for information about how
to recycle the packaging.
For product recycling information, please visit End of life directives
Philips pays a lot of attention to produce
environmental-friendly products in green focal areas. Your
new TV contains materials which can be recycled and
reused. At the end of its life, specialized companies can
dismantle the discarded TV to concentrate the reusable
materials and to minimize the amount of materials to be
disposed of. Please ensure you dispose of your old TV
according to local regulations.
Disposal of Used Batteries
In certain localities, disposing batteries with household
waste is not permitted. Please ensure you dispose of
batteries according to local regulations.
Batteries usage
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, Li-ion, etc.) batteries.
Preparing to move / ship the unit
Please pack the unit properly by following the diagram on
the carton (as noted below).
1
•
2
3
4
To avoid damage to the screen, do not pack the stand
on the same side as the TV screen, refer to the step 4
above.
8 .English
2 Getting started
Supplied accessories
User Manual
Quick Start Guide
Caution Sheet
Features
• DTV / Analog TV / CATV
You can use your remote control to select channels which are broadcast in digital format and
conventional analog format. Also, cable and satellite subscribers can access their TV channels.
• Information display
You can display on the TV screen the title, contents (DTV only) and other information on the current
program.
• Autoprogram
Remote Control
TV base and Screws
This unit automatically scans and memorizes channels available in your area, eliminating difficult
setup procedures.
• Net TV
This unit lets you enjoy internet services. Use the remote control to browse the Net TV pages. You
can play movies and much more, all from your TV screen.
• Child lock
This feature allows you to block children’s access to inappropriate programs.
• Closed caption decoder
Built-in closed caption decoder displays text for closed caption supported programs.
• MTS / SAP tuner
Audio can be selected from the remote control.
• Auto standby
If there is no input signal and no operation for 15 minutes, the unit will go into standby mode
automatically.
Screws packed with this Unit.
Model
• Sleep timer
You can set the unit to go into standby mode after a specific amount of time.
• Choices for on-screen language
55PFL5601
Quantity
Size
8
2
M4 x 0.472”(12mm)
M5 x 0.472”(12mm)
Select your on-screen language: English, Spanish or French.
• Stereo sound function
• PLL frequency synthesized tuning
Provides free and easy channel selection and lets you tune directly to any channel using the
number and decimal point “•” keys on the remote control.
• Various adjustments for picture and sound
Customizes picture quality suitable for your room and sets your sound preference.
• EasyLink via HDMI link
EasyLink allows your other HDMI link devices to be controlled by the HDMI cable connected to
your TV.
• HDMI input
• HDMI-DVI input
If your video device has a DVI output jack, use an HDMI-DVI conversion cable to connect the
unit.
• Component video input
• PC input
• AV input
Audio and video input from an external device.
• USB terminal
Note(s)
• If you lose the screws, please purchase the above-mentioned Phillips head screws at your local
store.
• If you need to replace these accessories, please refer to the part name or No. with the illustrations
and call our toll free customer support line found on the cover of this User manual.
When using a universal remote control to operate this unit.
• Make sure the component code on your universal remote control is set to our brand. Refer to
the instruction book accompanying your remote control for more details.
• We do not guarantee 100% interoperability with all universal remote controls.
Symbols used in this User manual
The following is the description for the symbols used in this User manual.
Description refers to:
Digital TV operation
The picture, music and video files stored on a USB memory stick can be played back on this unit.
• Digital audio output
• Headphone audio output
Headphone 3.5mm stereo jack for personal listening.
Cable / NTSC (Analog) TV operation
• If neither symbol appears, the operation is applicable to both.
Continued on next page.
9 .English
Stand assembly
Installing the remote control batteries
M4 x 0.472” (12mm)
M5 x 0.472” (12mm)
×4
×2
1
2
Slide the battery cover off the back of the remote control.
3
Slide the cover back into position.
Insert two batteries (AAA, 1.5V). Be sure the + and – ends of the
batteries line up with the markings inside the case.
Note(s)
•
Remove the batteries if not using the remote control for an extended period of time.
Attaching the base
You must attach the base to the unit to have it as a table top unit.
Be sure the front and rear of the base match the proper direction. For large
screen TVs, at least 2 people are required for these steps.
1
2
×4
M4 x 0.472” (12mm)
Note(s)
• Make sure to use a table which can support the weight of this unit and is larger than this unit.
• Make sure the table is in a stable location.
• A Phillips-head screwdriver is required to fasten the stands to the TV set.
• When attaching the base, ensure that all screws are tightly fastened. If the base is not properly
attached, it could cause the unit to fall, resulting in injuries as well as damage to the unit.
• To remove the base from this unit, unscrew the Phillips-head screws by reversing the procedure.
Be careful not to drop the base when you remove it.
Continued on next page.
10 .English
Remote control
a
s
(POWER)
Turns the TV on from standby or off to standby.
VUDU
Access directly to VUDU.
EasyLink buttons
/ : Searches backward or forward through the disc.
b
c
r
q
f
g
h
p
i
j
o
n
k
l
m
: Starts, pauses or resumes playback.
.
: Stops the disc playback.
Note(s)
d
e
.
•
Pause may not work properly on some devices even if they are EasyLink (HDMI CEC)
compliant.
YouTube
Access directly to YouTube.
(Home)
Displays the main menu.
INFO
Displays information about the current program.
! OK
Press to decide the command of setting when the Home menu is
displayed.
" (NAVIGATION buttons)
Moves the cursor, selects the on-screen menu items.
# OPTIONS
Displays a list of menu items applicable to the highlighted object or
screen.
$ SOURCE
Selects connected devices.
% CH + / –
Selects a channel.
& Apps (APP1 / APP2 / APP3 / APP4) buttons
Works as direct access to user specified net apps.
' 0 - 9 (NUMBER buttons)
Used to enter a channel / program number.
• (DOT)
: Use with 0-9 to select digital channels.
For example, to enter 2.1, press
PREV.CH : Returns to the previously viewed channel.
( (MUTE)
Turns the sound on and off.
) VOL + / –
Adjusts the volume.
* BACK
Returns to the previous menu operation.
+ FORMAT
Adjusts the picture size on the TV screen.
, NETTV
Access to Net TV menu directly.
- NETFLIX
Access directly to Netflix.
Continued on next page.
11 .English
Control panel
Terminals
c
d
e
m
f
n
g
a
b
Remote control sensor
Receives IR signal from remote control.
Power on / Standby indicator
(On : lights in white, Standby : no light)
(POWER)
Turns the TV on or switches the TV into standby mode.
SOURCE
Selects connected devices.
MENU
Opens the main on-screen menu.
CH (+) / (–)
Selects a channel. In the menu screen, moves the cursor up () (–) /
down () (+).
! VOL
(–) / (+)
Adjusts the volume. In the menu screen, moves the cursor left (
) (–) /
right () (+).
VOL
(–) : Volume down
VOL (+) : Volume up
o
h
i
p
j
k
l
" Ethernet port
For internet connection using an Ethernet cable with an RJ-45
connector.
# Digital audio output jack
Digital audio (S/PDIF) output to home theaters and other digital audio
systems.
$ PC input jack
VGA cable connection for PC.
% Component (Y/Pb/Pr) / Composite video (VIDEO) input jack(s) for
VIDEO
Composite video input (VIDEO) jack is a shared jack with component
video input (Y) jack. Green / Yellow color orientation depends on
model.
& Analog audio (L/R) input jacks
Connect analog audio signals from;
–HDMI-DVI / Analog audio (L/R) jacks signal
–Component video / Analog audio (L/R) jacks signal
–Composite video / Analog audio (L/R) jacks signal
'
(
)
*
–PC connection / Analog audio (L/R) jacks signal with stereo mini 3.
5mm plug audio cable on PC
HDMI input jack(s)
Digital audio and video input from high definition digital devices such
as DVD / Blu-ray disc players, cable / satellite set-top boxes, PC’s,
etc.
* For HDMI 1 only
In addition to normal HDMI and HDMI-DVI functionality, it outputs
TV audio to an HDMI-ARC-compliant device, such as a home
theater system.
USB terminal
Data input from USB memory stick only.
Do not connect any device to this terminal such as digital camera,
keyboard, mouse, etc.
75 ohm cable / Antenna connection
Signal input from an antenna or cable / satellite set-top boxes.
Headphone audio output jack
Headphone 3.5mm stereo jack for personal listening.
Continued on next page.
12 .English
Connecting Antenna or Cable / Satellite /
IPTV set-top box
Connecting a Cable / Satellite / IPTV set-top box, Bluray disc / DVD recorder via composite connectors and
analog audio
Be sure your antenna or another device is connected properly before
plugging in the AC power cord.
Do not place your recorder too close to the screen because some recorders
can be susceptible to harmful interference from the TV.
If connecting to an antenna through an RF cable
Satellite
Any DTV programs that are broadcast in your area can be received for
free through an antenna connection.
Cable
OUT
Cable
RF cable
IN
IN
RF cable
Antenna
RF cable
IN
If connecting Cable / Satellite / IPTV set-top box using an RF
cable
IN
IN
Set-top Box
OUT
OUT
Cable
OUT
Video +
Audio(L/R)
cables
OUT
IN
Video + Audio(L/R) cables
If the TV is connected to a cable or set-top box via a coaxial connection,
set the TV to channel 3/4 or the channel specified by the service
provider.
Blu-ray Disc / DVD Recorder
Note(s)
•
• Depending on your antenna system, you may need different types of combiners (mixers) or
RF cable
IN
Antenna
separators (splitters) for HDTV signal. The minimum RF bandpass on these devices is 2,000MHz
or 2GHz.
IN
• For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the
OUT
RF cable
If you have any question about the DTV’s antenna, visit www.antennaweb.org for further
information.
antenna input jack before moving the unit.
• If you did use an antenna to receive analog TV, it should also work for DTV reception. Outdoor
or attic antennas will be more effective than a set-top box or inside antenna.
Set-top Box
• To turn on your reception source easily between antenna and cable, install an antenna
If connecting Cable / Satellite / IPTV set-top box using an HDMI
cable
If the TV is connected to a cable / satellite set-top box via an HDMI cable,
make sure you select the correct source by using SOURCE.
selector.
• If you are not receiving a signal from your cable service, contact the cable provider.
Plugging in the AC power cord
Make sure that the AC power cord must be plugged to an AC outlet after
all the necessary connections are made.
IN
Caution(s)
RF cable
OUT
IN
• Connect the analog audio signal cables from the external device to the analog audio L/R input
jacks.
HDMI cable
Set-top Box
• If you have an amplifier, connect the HDMI cable to the HDMI input via your amplifier.
Note(s)
If connecting Cable / Satellite / IPTV set-top box using
component video input
• Each time you plug in the AC power cord, no operations will be performed for several seconds.
This is not a malfunction.
If the TV is connected to a cable / satellite set-top box via component
video input, make sure you select the correct component video source
by using SOURCE.
RF cable
Audio (L/R) cables
OUT
IN
IN
IN
Component (Y/Pb/Pr)
Video cables
Set-top Box
OUT
Continued on next page.
13 .English
No supplied cables are used with these connections:
• Please purchase the necessary cables at your local store.
Connecting your devices
Before you connect the AC power cord:
Be sure other devices are connected properly before plugging in the AC
power cord.
Selecting your connection quality
HDMI digital connection
HDMI connection offers the highest picture quality.
HDMI (High-Definition Multimedia Interface) transports high-definition
digital video and multi-channel digital audio through a single cable.
Set-top Box
or
HDMI - Highest quality
Blu-ray Disc/DVD Player
or
OUT
HDMI cable
IN
Supports high-definition digital signals and gives highest picture and
sound quality. Video and audio signals are combined in one cable. You
must use HDMI for full high-definition video and to enable
EasyLink(HDMI CEC).
Note(s)
• Philips HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP is a form of
digital rights management that protects high-definition content in Blu-ray discs or DVDs.
• The HDMI-ARC connector on the TV features HDMI-ARC functionality. This allows output of
TV audio to an HDMI-ARC-compliant device.
HD game console
Note(s)
•
If there are issues with picture/color and/or sound when connecting an external device using
the HDMI port, please try switching the HDMI mode. (Refer to HDMI mode p. 33)
• Some HDMI cables and devices may not be compatible with the TV due to different HDMI
specifications.
• Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed HDMI cable is
recommended for the better compatibility.
• The unit accepts 480i / 480p / 720p / 1080i, 1080p, 2160p 24/30/60Hz of video signals, 32kHz/
44.1kHz and 48kHz of audio signals.
Component (Y Pb Pr) - High quality
• This unit accepts LPCM, AC-3, DD+ audio signal.
• This unit accepts only signals in compliance with EIA861.
HDMI-DVI connection
This unit can be connected to your device that has a DVI terminal.
Use an HDMI-DVI conversion cable for this connection and it requires
audio cable for analog audio signal as well.
Cable Receiver or
Satellite Set-top Box with
the DVI Output jack
Supports high-definition analog signals but gives lower picture quality
than HDMI. Component (Y/Pb/Pr) video cables combine red / green /
blue video cables with red / white audio (L/R) cables. Match the cable
colors when you connect to the TV.
IN
HDMI-DVI
conversion cable
OUT
OUT
IN
Audio (L/R) cables
Composite - Basic quality
Note(s)
•
Some HDMI cables and devices may not be compatible with the TV due to different HDMI
specifications.
• Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed HDMI cable is
recommended for the better compatibility.
• The unit accepts 480i, 480p, 720p, 1080i, 1080p and 2160p video signals.
• HDMI-DVI connection requires separate audio connections as well and the audio signals are
output as analog (L/R) audio.
For analog connections. Composite video / Audio analog cable usually
combine a yellow video cable with red / white audio (L/R) cables. With
this unit, yellow cable must be connected to Y (green) jack on the
component video input jacks.
• DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
Continued on next page.
14 .English
HDMI-ARC connection
Composite analog video connection
HDMI-ARC allows you to use EasyLink to output TV audio directly to a
connected audio device, without the need for an additional digital audio
cable.
Composite analog video connection offers standard picture quality for
video devices connected to the unit.
HDMI 1 IN only
HDMI cable
If you connect to the unit’s component / composite video (Y/VIDEO) input
jack (green), connect audio cables to the audio (L/R) input jacks. When
the audio is monaural, then only connect to the audio L input jack.
OUT
OUT
Digital home theater
amplifier that supports
HDMI-ARC
Video + Audio(L/R) cables
DVD Player
IN
Note(s)
•
The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to output digital
audio to an HDMI home theater system.
• Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected to the
device using an HDMI cable attached to HDMI-ARC connectors.
Note(s)
•
With this unit, yellow cable must be connected to Y (green) jack on the component video input
jacks.
• Whenever you connect to the composite video input jack (Y/VIDEO), you must disconnect the
component video input jacks (Pb and Pr). If you leave those jacks connected, it may cause an
unstable picture.
Component analog video connection
Component analog video connection offers better picture quality for
video devices connected to the unit.
If you connect to the unit’s component video (Y/Pb/Pr) input jacks,
connect analog audio cables to the analog audio (L/R) input jacks.
Audio (L/R) cables
Connecting the TV to the internet using an Ethernet
cable
Internet
OUT
Set-top Box
or
IN
IN
Component (Y/Pb/Pr)
Video cables
LAN
OUT
Blu-ray Disc/DVD
Recorder
Ethernet cable
Network provisioning
equipment
Note(s)
• The unit accepts 480i, 480p, 720p, 1080i and 1080p of video signals for this connection.
Note(s)
• Please purchase shielded Ethernet cables at your local store and use them when you connect
to network equipment.
• After connecting an Ethernet cable, set up necessary network settings. Connect to network p. 38
• Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid damaging
the unit.
• If your telecommunications equipment (modem, etc.) does not have broadband router
functions, connect a broadband router.
• If your telecommunications equipment (modem, etc.) has broadband router functions but there
is no vacant port, then add a hub.
• For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.
• Do not connect your PC directly to the Ethernet port of this unit.
Continued on next page.
15 .English
Connecting the TV to the internet using a wireless LAN
PC connection
HDMI connection
Internet
Network provisioning
equipment
This unit can be connected to your PC that has an HDMI terminal. Use an
HDMI cable for this digital connection.
LAN
OUT
IN
HDMI cable
Ethernet cable
Broadband router
PC
WLAN
HDMI-DVI connection
Note(s)
• After you make the wireless connection, set up the necessary network settings. Connect to
network p. 38
• Use a wireless LAN Access Point (AP) (e.g. broadband wireless router) which supports
This unit can be connected to your PC that has a DVI terminal.
Use an HDMI-DVI conversion cable for this video digital connection and
it requires stereo mini 3.5mm plug audio cable for analog audio signal as
well.
IEEE 802.1 1 a/b/g/n/ac. (n is recommended for stable operation of the wireless network.)
• This unit does not support Ad-hoc mode.
• Other radio devices or obstacles may cause interference to the wireless network connection.
IN
OUT
PC
HDMI-DVI
conversion cable
Digital audio output connection
If you connect this unit to an external digital audio device, you can enjoy
multi-channel audio like 5.1ch digital broadcasting sound.
OUT
IN
Stereo Mini 3.5 mm Plug Audio cable
Use a digital audio optical cable to connect the unit to external digital
audio devices.
VGA connection
IN
OUT
Digital Audio
Optical cable
Digital Home
Theater Amplifier
This unit is equipped with a PC input jack. If you connect this unit to your
PC, you can use this unit as a PC monitor.
Use a VGA cable for this video connection and it requires a stereo mini 3.
5mm plug audio cable for analog audio signal as well.
VGA cable
PC
OUT
IN
IN
Stereo Mini 3.5 mm Plug Audio cable
Continued on next page.
16 .English
The following PC-input video signals can be displayed:
Format
Resolution
VGA
640 x 480
SVGA
800 x 600
XGA
1,024 x 768
WXGA
FHD
UHD *1
Refresh rate
60Hz
1,280 x 768
1,360 x 768
1,920 x 1,080
3,840 x 2,160
24/30/60Hz *2
4,096 x 2,160
Other formats or non-standard signals will not be displayed correctly.
*1
UHD format is available only when using the HDMI connection and
HDMI-DVI connection.
*2
Refresh rate for VGA connection is only 60Hz.
Note(s)
• Please purchase a VGA cable that has a ferrite core (0.6 inches (15mm) or more in diameter).
• Please purchase a HDMI-DVI conversion cable that has a ferrite core.
• The following operations may reduce noise.
–Attach a ferrite core to the AC power cord of your PC.
–Unplug the AC power cord and use the built-in battery of your portable / laptop PC.
• Some HDMI cables and devices may not be compatible with the TV due to different HDMI
specifications.
• Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed HDMI cable is
recommended for the better compatibility.
• The unit accepts 480i, 480p, 720p, 1080i, 1080p and 2160p video signals only when using the
HDMI connection and HDMI-DVI connection.
• HDMI-DVI connection requires separate audio connections as well and the audio signals are
output as analog (L/R) audio.
• DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
USB memory stick
This unit offers easy playback of picture, music and video files.
Insert the USB memory stick into the USB terminal shown below.
For a complete list of file formats and specifications supported, refer to
USB Section p. 24
Note(s)
•
• Do not use a USB hub or an extension cable to connect an external hard disk drive to the unit.
The unit recognizes only a USB memory stick.
(Not supported.)
• Always insert a USB memory stick directly to this unit.
• A USB memory stick is not supplied with this unit.
• We do not guarantee that all USB memory sticks can be supported by this unit.
• Be sure to keep a backup copy of the original files on your USB device before you play them
back on this unit. We have no responsibilities for damage or loss of your USB stored data.
• To protect your USB memory stick files from being erased place the write protect sliding tab in
the protect position (if available).
• When you are ready to remove a USB memory stick, set the unit to go into standby mode to
avoid any damage to your data and the unit.
• A USB memory stick that requires its own driver or the device with a special system such as
fingerprint recognition are not supported.
• This unit is not allowed to use the USB memory stick which requires an external power supply
(500mA or more).
Continued on next page.
17 .English
These operations are accessible by remote control.
Some may also be accessible by the main unit's control panel.
6
Use to select the signal type.
• If the TV is connected to a cable or satellite set-top box, select the
2nd one and skip to step 8.
Initial setup
This section will guide you through the unit’s Initial setting which includes
selecting a language for your on-screen menu, country, location and
Autoprogram, which automatically scans and memorizes viewable
channels. You can also set the network connection in this setting.
Installation
Select "Antenna" to set up a TV
signal from a cable TV wall jack
or a standard TV antenna.
Before you begin:
Make sure the unit is connected to an antenna or cable.
1
2
Use to select the on-screen language, country, TV placement
and location in the middle of the TV screen, then press OK.
• You must set Home in location setting. Otherwise, Picture and
Set-top box
Select "Set-top box" to set up a TV
signal from a cable TV box
or satellite TV receiver.
After making all the necessary connections, press to turn on the
unit.
• It may take a few moments to turn on the unit for the first time.
• Initial setup menu appears automatically after the unit is turned on.
Antenna
1 234 56
7
7
Use to select Antenna for TV channels or Cable for CATV
channels, then press OK.
Sound settings you adjusted will not be memorized after the unit
goes into standby mode.
3
4
Use to select Skip or Next on network setup screen.
Installation
Use to select Wireless or Wired, then press OK.
Make sure that you have
attached your antenna or cable
signal into the jack on the back of
your TV labeled "ANTENNA IN".
Installation
This TV can be connected to
your home network. Select your
connection type.
Wireless
1 234 56
Wired
Antenna
Cable
Skip
Now select either Antenna or
Cable, using up/down key of the
remote control. Once you have
made your selection, press the
OK button to proceed.
7
–When Antenna is selected, the TV detects antenna signals. It
searches for DTV and analog TV channels available in your area.
1 234
Skip
567
Wireless
If you have a wireless router, select Wireless to
connect to the internet.
Wired
If you connect with an Ethernet cable, select Wired to
connect to the internet.
• If you have a router with easy connect function, select Wireless and
–When Cable is selected, the TV detects signals supplied by cable.
It searches for DTV, analog TV and cable channels available in
your area.
• Auto programming will begin.
Installation
use to select Easy Connect, then press OK.
5
System searching. Please wait…
Follow the on-screen instructions to complete the installation.
Auto programming may take more
than 20 minutes to complete.
Digital channels will take longer
than Analog to find and program.
Please wait until you see the Auto
Programming complete message.
• When you select On in the selection screen for Auto software
update, A message will appear later if there is the latest software
on the network server.
1 234 56
Stop
Digital channels found:
Analog channels found:
0
0
Total progress:
7
Continued on next page.
18 .English
8
Use to select your preferred picture setting, then press OK.
Please select your preferred picture mode.
Search for channels p. 35
Language p. 33
Sports
12
Skip
Use to select your preferred sound setting, then press OK.
Please select your preferred sound mode.
• If you want to change the country setting.
Country p. 48
• If you want to change the location setting.
Location p. 33
• If you want to change the network setting.
Connect to network p. 38
• If you want to restore the picture and sound setting.
Standard
Picture and sound setup p. 28
Vivid
Sports
1
• If you want to scan the channels automatically again.
• If you want to change to another language.
Standard
Vivid
9
After an initial setup is completed...
Skip
2
10 After Picture and sound setup is completed, a message will appear
if there is the latest software on the network server.
Note(s)
• If you are not receiving a signal from your cable service, contact the cable provider.
• If you press during Autoprogram, this setup of TV channels will be cancelled.
• The initial Autoprogram function can be executed for either Antenna or Cable only once. When
you change the connection (Antenna / Cable), select Search for channels again. p. 35
19 .English
3 Use your TV
Switching channels
TV
Switching on your TV and putting it in
standby mode
TV
Remote Control
Remote Control
To turn the TV on from standby or off to standby
• Press on the TV or the remote control.
Note(s)
• Energy consumption contributes to air and water pollution. When the AC power cord is plugged
in, your TV consumes energy with a very low standby power consumption.
Adjusting volume
To select channels by using CH / or CH + / –
• Press CH (up) / 㸦down) on the TV or press CH + / – on the remote
TV
control.
To select channels by using the NUMBER buttons
Digital TV operation
• For digital channels, press a number followed by a dot “•” and the
corresponding sub channel number.
Remote Control
–When selecting digital channel 1 1. 1
Be sure to press • before entering the subchannel number.
Cable / NTSC (Analog) TV operation
–When selecting cable or analog channel 1 1
To decrease or increase volume
• Press VOL
/ on the TV or press VOL + / – on the remote control.
VOL
(–) : Volume down
VOL (+) : Volume up
To mute or unmute sound
• Press on the remote control to mute the sound.
• Press again or VOL + / – to recover the original sound.
Press PREV.CH to return to the previously viewed channel.
Note(s)
•
• Channel not available or No signal will appear on the TV screen after the subchannel broadcast
To select the non-memorized channels, use the NUMBER buttons.
is over.
• Audio only message will appear on the TV screen, when you receive only sound signal.
Continued on next page.
20 .English
Watching channels from an external
device
Switching each input mode can easily switch with the remote control
between TV and external devices when they are connected to the unit.
1
Turn on the set-top box or the connected device.
Lock or unlock your device from the Home menu
This section describes how to lock or unlock specified device.
1
2
3
4
Press SOURCE on the remote control.
Use to select a device to lock or unlock.
Press OPTIONS on the remote control.
Use to select Lock or Unlock, then press OK.
• If device lock is unlocked, Lock will be displayed. If device lock is
locked, Unlock will be displayed at the top right of the device
icons.
Press SOURCE and use to select the set-top box or the
connected device and wait a few seconds till the picture appears.
5
Enter your PIN. Change PIN p. 37
Changing device type
Watch TV
HDMI1
HDMI2
HDMI3
Video
Use the remote control of the set-top box or the connected device
to select channels.
Access the Home menu
1 Press .
You can change device icons displayed in the source list.
1
2
3
4
Press SOURCE on the remote control.
Use to select the desired device.
Press red button on the remote control.
Use to select the desired type, then press OK.
To reset the type
• Press OPTIONS on the remote control at step 3, then select Original
icon.
Scan connections
You can rescan TV connections and update the source list.
Before you begin:
You must set On in Master EasyLink. p. 34
1
2
3
4
Guide to Home menu
Watch TV
Source
Home
Network
Net TV
Wireless
Screencasting
Press SOURCE on the remote control.
Use to move the cursor to any device.
Press OPTIONS on the remote control.
Use to select Scan connections, then press OK.
Setup
Watch TV
: Switches back to the TV source if another
source is selected.
Source
: To select connected devices.
Home Network
: Accesses Home network menus.
Net TV
: Accesses Net TV menus.
Wireless Screencasting : Accesses Wireless Screencasting menus.
Setup
: Accesses menus that allow you to
change picture, sound and other TV
settings.
Continued on next page.
21 .English
Create a list of favorite channels
Changing Picture format
You can create lists of your preferred TV channels so that you can find
those channels easily.
Display modes can be selected when your TV receives a 16:9 or 4:3 video
signal.
1
2
Press OK while viewing a TV program.
Three types of display modes can be selected for a PC input signal.
Use to select the desired channel, then press yellow
button.
Press FORMAT repeatedly to switch the TV aspect ratio.
3
Use to select the desired favorite list (Favorites 1 - Favorites 4),
then press OK to add or remove on the list of favorite channels.
• indicates that the channel is added.
• indicates that the channel is removed.
• The channel will be marked with ! icon.
For 16:9 video signal (4096 x 2160p)
Display the list of favorite channels
1
2
Press OK while viewing a TV program.
Use to select Favorites.
Unscaled
To change the favorite list
1
2
Press blue button.
Full
For 16:9 video signal (3840 x 2160p)
Use to select the desired favorite list (Favorites 1 - Favorites 4).
To remove a channel from the favorite list
1
2
Select the desired channel, then press yellow button.
Unscaled
Use to select Yes, then press OK.
Full
For 16:9 video signal (not 2160p)
Automatic
4:3
Full
Wide screen
Automatic
Other than DTV and HDMI connected devices,
enlarges the picture to best fit the screen. DTV and
HDMI connected devices display the picture at its
original size.
The subtitles may remain visible.
4:3
Displays a 16:9 picture at a 4:3 size; the picture is
shortened horizontally. Sidebars appear on both
edges of the screen.
Wide screen
Displays a 16:9 picture that is stretched
horizontally and vertically.
Unscaled
Displays a 16:9 picture at its original size.
Full
Displays a scaled 16:9 picture. Bars appear on both
the upper and lower portions of the screen
depending on the type of video signal.
Continued on next page.
22 .English
For 4:3 video signal
TV screen information
You can display the currently selected channel or other information such
as the aspect ratio on the TV screen.
Automatic
Super zoom
4:3
In the digital mode, the detailed broadcasting information for the current
off-the-air channel such as program title and program guides are
displayed.
1
Wide screen
Movie expand 16:9
Movie expand 14:9
Automatic
Other than DTV and HDMI connected devices,
enlarges the picture to best fit the screen.
DTV and HDMI connected devices display the
picture at its original size. The subtitles may remain
visible.
Super zoom
Displays a 4:3 picture at a 16:9 size; the picture is
stretched horizontally and vertically and its left
and right edges are enlarged. This crops out some
of the top and bottom of the picture.
4:3
a
Displays a 4:3 picture at its original size.
Sidebars appear on both edges of the screen.
Displays a 4:3 picture at a 16:9 size; the picture is
Movie expand 16:9 stretched horizontally and vertically. This crops
out some of the top and bottom of the picture.
b
c
d
1 1.1 KABC A Day of Memories
Displays a 4:3 picture at a 14:9 size; the picture is
stretched horizontally and vertically.
Movie expand 14:9 This crops out some of the top and bottom of the
picture. Sidebars appear on both edges of the
screen.
Wide screen
Press INFO.
e
Resolution:
Picture format:
1080i
Full
f
Sound mode:
Audio language:
Stereo
English
English audio with description.
Favorites:
All
Rating:
None
g
h
i
Sleeptimer:
Close
Channel number / Input mode
Switching channels p. 19
Displays a picture that is stretched out of
proportion to fill the screen.
Watching channels from an external device p. 20
Broadcast station
Program title (for DTV only)
For PC input signal
CC (not available if Closed caption is set to Off)
Caption settings p. 31
Program’s image aspect ratio
4:3
Wide screen
Changing Picture format p. 21
Unscaled
Audio language (DTV) / Audio mode (Analog TV)
• This unit can also be connected to your PC that has a DVI terminal.
Use an HDMI-DVI conversion cable for this video connection and it
requires stereo mini 3.5mm plug audio cable for analog audio signal as
well.
• Refer to 16:9 video signal on this page if the PC has HDMI output.
4:3
Wide screen
Unscaled
Displays a proportionately stretched picture.
Sidebars appear on both edges of the screen.
Displays a picture that is stretched out of
proportion to fill the screen.
Displays a picture in its original size.
If the signal source has side or top-bottom bars inserted into the picture,
the Picture format function will not eliminate them.
Sound p. 30
! Favorites
Create a list of favorite channels p. 21
" Child lock rating
Child lock p. 36
# Remaining time on sleep timer
Sleeptimer p. 32
2
Press INFO to hide the information.
Note(s)
• While the program guide is displayed, the closed caption function is interrupted.
• The information display will automatically disappear in 5 seconds.
Continued on next page.
23 .English
Using options menu
Picture and sound
Following settings can be configured.
You can access to some TV settings directly by using OPTIONS.
Auto picture
1
Press OPTIONS to display options menu, then press OK.
Auto sound
Headphone
volume
2
Use to select a desired setting, then press OK.
Options
a
Digital audio
language
Mono/Stereo
To set predefined sound mode.
Sound p. 30
To adjust headphone volume.
Sound p. 30
TV speakers
To Select the audio output from the unit’s
speakers or not.
Sound p. 30
Picture format
To switch the TV aspect ratio.
Changing Picture format p. 21
Setup
To display setup menu.
ECO settings
Following settings can be configured.
b
c
You can turn off the unit automatically when there
is no operation for specified time. In spite of this
setting, the unit goes into standby mode
automatically if there is no signal input and no user
operation for 15 minutes.
d
Options
Following settings can be configured.
Closed captions
To set predefined picture mode.
Picture p. 28
To choose the Closed captions display setting.
Closed captions p. 31
To Select the language according to your
preference.
(It differs depending on the program.)
Digital audio language p. 37
To Select an audio format.
Mono/Stereo p. 37
Switch off timer
Press repeatedly to change the amount of time
(increases the time by 30 minutes up to 240
minutes).
Each press of will decrease the time by 30
minutes.
To cancel the timer, press repeatedly until “0” is
displayed.
Controls
If you have our brand products such as Blu-ray disc player or DVD
recorder that are compatible with EasyLink functions, connect them
to this unit via an HDMI cable so you can simply operate various items
from this unit’s remote control.
Before you begin:
select a device connected to an HDMI connection. p. 20
You must set On in Master EasyLink. p. 34
Otherwise, LINK does not work even if you connected our brand
devices to this unit.
1
2
3
Press OPTIONS to display options menu.
Use to select Controls then press OK.
Use to select the desired item, then press OK.
Device-menu
Controls the menu of your connected EasyLink
device.
Device-contents
Controls the top menu of your DVD or Blu-ray
discs.
Device-favorite
Controls the pop-up menu of your Blu-ray discs.
Note(s)
• Some of EasyLink functions may not be available depending on your EasyLink devices or
discs.
• You must connect this unit to our brand EasyLink devices and be sure its EasyLink (HDMI CEC)
setting is also set to On.
• We do not guarantee 100% interoperability with other brands of HDMI link compliant devices.
Continued on next page.
24 .English
Note(s)
USB
Your TV is fitted with a USB connection that enables you to view photos,
listen to music or watch video files stored on a USB memory stick.
1
2
• This unit accepts USB memory stick only. Other storage devices such as external HDD by USB
bus power will not work.
• Do not use an extension cord and/or USB hub to connect devices to this unit. Always directly
insert the USB flash memory stick to this unit directly.
Press SOURCE and use to select USB, then press OK.
• We cannot be held responsible if your USB memory stick is not supported, nor will we accept
Use to select the desired file, then press OK.
• The USB memory stick is not supplied with this TV.
• A maximum of 1,023 folders or files can be recognized.
• A file name exceeding 256 characters or contains a dot character is not supported on this TV.
• A USB memory stick that required its own driver or the device with a special system such as
any liability for damage or loss of stored data.
Photo
Photo
folder_A
folder_B
folder_C
folder_D
folder_E
fingerprint recognition are not supported.
• Be sure to keep a backup copy of the original files on your USB device before you play them
back on this unit. We have no responsibilities for damage or loss of your USB stored data.
• To avoid damaging the USB memory stick and the unit always turn off the unit before you
remove the USB memory stick.
• This unit is not allowed to use the USB memory stick which requires external power supply (500
mA or more).
• This unit does not support MTP (Media Transfer Protocol) or the file other than FAT16 and FAT32
file system. If the file is not supported, an error message appears.
Sample picture.jpg
• These recorded files must meet specifications shown below:
Picture (JPEG / Progressive JPEG)
JPEG
Upper limit
4000x4000 pixels
Progressive JPEG
Upper limit
1024x768 pixels
• When the unit does not recognize the USB memory stick, try reconnecting it.
• Playing the files recorded with high bit rates, the images can be interrupted in some occasions.
• This unit does not support external subtitles.
• This unit cannot play back a file which goes over the limit of file restriction limit.
Music (MP3 / WAV / AAC)
Sampling frequency
MP3
Constant bit rate
Sampling frequency
WAV
Constant bit rate
Sampling frequency
AAC
16 kHz - 48 kHz
8 kbps - 320 kbps
8 kHz - 48 kHz
64 kbps - 1.5 Mbps
8 kHz - 48 kHz
-
Constant bit rate
Video (MPEG / VOB / AVI / MP4)
Maximum video
Extension
Video
codec
Audio
codec
H.264, H.265/HEVC: 3840x2160@30fps,
MPEG: 1920x1080@60fps
.avi
.mpg,
.mpeg
MPEG1,
MPEG1,
MPEG2,
MPEG2,
MPEG4,
MPEG4
H.264
.ts,
.trp,
.tp
.vob
MPEG1,
MPEG2,
H.264,
H.265/
HEVC
MPEG1,
MPEG2
.mp4
.mkv
MPEG1, MPEG1,
MPEG2, MPEG2,
MPEG4, MPEG4,
H.264,
H.264,
H.265/ H.265/
HEVC
HEVC
Dolby Digital
YES
YES
YES
YES
YES
YES
MPEG1/2 audio
layer1/2/3
YES
YES
YES
YES
NO
YES
LPCM
YES
YES
YES
YES
YES
YES
AAC-LC
YES
YES
YES
YES
YES
YES
Continued on next page.
25 .English
Viewing photos
Playing music
1
2
3
1
2
3
Use to select Photo, then press OK.
Use to select the desired item, then press OK.
Press OK or . to start a slide show of the files.
• Press OK or . to pause the slide show.
• The . icon appears.
• Press or to move between images.
• Press BACK or . to stop the slide show.
• Press OPTIONS to display the optional menu, then use to
select the desired item.
Repeat *1
Slide time *1
Off
Sets repeat playback to off.
One
Sets repeat playback for a selected image file.
All
Sets repeat playback for all image files in the
current folder.
Short
Switches to the next image in 5 seconds.
Medium
Switches to the next image in 10 seconds.
Long
Switches to the next image in 15 seconds.
None
No effect when switching images.
Dissolve
Transitions *1
Rotate *2
Pushes the current image out from left.
Wipe left
Pushes the current image out from right.
Wipe up
Pushes the current image out from bottom.
Zoom *2
Auto picture *1
Press OK or . to play the selected files.
• Press OK or . to pause, then press OK or . again to resume.
• Press to fast-forward search.
• Press to fast-backward search.
• Press . to stop playback.
• Press OPTIONS to display the optional menu, then use to
select the desired item.
Repeat
Shuffle
The next image comes to the center from the
outside.
Box out
The next image goes to the outside from the
center.
0
Displays an image in its original direction.
90
Rotates an image 90 degrees clockwise.
180
Rotates an image 180 degrees clockwise.
Off
Sets repeat playback to off.
One
Sets repeat playback for a selected music
file.
All
Sets repeat playback for all music files in
the current folder.
Off
Sets shuffle playback to Off.
On
Sets shuffle playback for all music files in
the current folder.
Off
The sound will not be output from the
unit's speakers.
On
The sound will be output from the unit's
speakers.
Speakers
EasyLink
You can control audio output from your
connected EasyLink compliant devices
with VOL + / – by using this unit's remote
control.
TV Speakers
Pushes the current image out from top.
Box in
270
Use to select the desired item, then press OK.
Overlaps the next image on the current image.
Wipe right
Wipe down
Use to select Music, then press OK.
Auto sound
Selects the sound mode according to your preference.
(Standard, Vivid, Sports, Movie, Music and News)
Rotates an image 270 degrees clockwise.
1X
Displays an image in its original size.
2X
Magnifies a current image by 2 times.
4X
Magnifies a current image by 4 times.
Selects the picture mode according to your preference.
(Standard, Natural, Vivid, Sports, Movie, Game, Energy saving
and Internet video)
*1
You can set Repeat, Slide time, Transitions and Auto picture when
images are in slide show.
*2
You can set Rotate and Zoom when slide show is in pause mode.
Continued on next page.
26 .English
Playing movies
1
2
3
Use to select Movie, then press OK.
Use to select the desired item, then press OK.
Press OK or . to play the selected files.
• Press OK or . to pause, then press OK or . again to resume.
• Press to fast-forward search.
• Press to fast-backward search.
• Press . to stop playback.
•
Press . to resume from the point at which playback was stopped.
Press OK to play from the beginning of the file.
Press OPTIONS to display the optional menu, then use to
select the desired item.
Repeat
Off
Sets repeat playback to off.
One
Sets repeat playback for a selected video
file.
All
Sets repeat playback for all video files in
the current folder.
Off
The sound will not be output from the
unit's speakers.
On
The sound will be output from the unit's
speakers.
Speakers
EasyLink
You can control audio output from your
connected EasyLink compliant devices
with VOL + / – by using this unit's remote
control.
TV speakers
Selects the picture mode according to your preference.
Auto picture (Standard, Natural, Vivid, Sports, Movie, Game, Energy
saving and Internet video)
Auto sound
Selects the sound mode according to your preference.
(Standard, Vivid, Sports, Movie, Music and News)
Note(s)
• The resume information will be kept even when the unit is Turned off.
• If you play another file while the previously viewed file is being resumed, the resume information
of the previously viewed file will be deleted.
• The file or the folder in resume stop mode will be highlighted in gray on List or Thumbnails.
27 .English
4 Getting more from your
TV
This section describes the overview of the Setup menu displayed when
you press and use to Select Setup.
The Setup menu consists of the function setting items below.
1
Picture and sound
setup
p. 28
Guides you to get the best picture and sound settings.
Press to display the Home menu.
TV settings
p. 28
Accesses menus that allow you to change picture, sound and
TV usage settings.
2
Use to select Setup, then press OK.
Search for channels
p. 35
Guides you through channel installation.
TV
Source
Home
Network
Net TV
Wireless
Screencasting
Setup
Channel settings
p. 35
Accesses menus that allow you to change channel settings.
3
Use to select the desired menu and an item, then press OK.
Connect to network
p. 38
Guides you through network installation.
Picture and
sound setup
Search for
channels
Connect to
network
Update
software
TV
settings
Channel
settings
Network
settings
Software
settings
To quickly set basic picture and sound settings, press OK
Network settings
p. 39
Accesses menus that allow you to network settings.
Update software
p. 43
Guides you through an update of the TV software.
Software settings
p. 44
Accesses menus that allow you to change software settings.
Continued on next page.
28 .English
Picture and sound setup
When you adjust the following settings, Personal picture will be set
automatically.
Before you begin:
Cursor You must set Home in Location. p. 33
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into standby mode.
1
2
3
Press and use to select Setup then press OK.
Use to select Picture and sound setup, then press OK.
Follow steps 8 to 9 in Initial setup p. 18
Backlight
To increase power
consumption and
brightness
Contrast
To decrease contrast
To increase contrast
Brightness
Color
Tint
Sharpness
TV settings
Before you begin:
You must set Home in Location. p. 33
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into standby mode.
Press and use to select Setup then press OK.
4
To increase color
intensity
To add green
To add red
To soften
To sharpen
Automatic
Super zoom
4:3
Picture format
Use to select TV settings, then press OK.
Auto picture
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced settings
Picture format
Mode selection
Auto adjustment
Clock
The following picture settings can be configured. Depending on the
format of the picture source, some picture settings are not available.
To set your TV to a predefined picture setting.
Personal
The customized settings you
defined using the Picture menu.
Standard
For normal TV viewing.
Natural
Vivid
Auto picture
Changing Picture
format p. 21
Full
Unscaled
PC
To turn off image
enhancement features
which makes the TV to
act purely as a monitor
HDTV
To enable image
enhancement features
to improve picture
quality
Mode selection
Auto adjustment
To adjust the horizontal / vertical position, clock
and phase of the PC screen automatically
Cursor Clock
Use to select the item you want to adjust, then press OK.
Movie expand 14:9
Movie expand 16:9
Wide screen
Use to select Picture, then press OK.
Picture
Sound
Features
Installation
To decrease brightness To increase brightness
To decrease color
intensity
Enters sub-menus to adjust the following settings:
(Color alignment, Noise reduction, Black stretch,
Dynamic contrast, Gamma, 120 PMR, 4K UHD
Advanced settings
Upscaling, Macro Dimming, MPEG artifact
reduction, Color enhancement, Custom color
management, Blue stretch and Film mode)
Picture
1
2
3
Cursor To reduce power
consumption and
brightness
Phase
To decrease setting
value
Cursor To increase setting
value
Horizontal position To move PC screen left To move PC screen right
Vertical position
To move PC screen
down
To move PC screen up
Ideal picture mode for viewing high
quality content without any picture
enhancements.
Enhanced picture contrast and
sharpness for viewing in a well-lit
room.
Sports
Brilliant picture settings for high
action.
Movie
Deep picture settings for a
cinematic experience.
Game
Optimized for PCs and game
consoles.
Energy saving
Eco TV settings for low power
consumption.
Internet video
Optimized for low bit-rate internet
video.
Continued on next page.
29 .English
You may adjust picture quality and enhancement settings using
Advanced settings sub menus. These settings allow for advanced and
precise color and picture quality adjustment. Some of them can
degrade the picture quality if not configured properly. We recommend
leaving these as set if you are unsure of what they affect.
Color
enhancement
Off
To set color enhancement to off
On
To make colors more vivid and bright
To select the desired setting, then press OK
(Red, Yellow, Green, Cyan, Blue and Magenta)
Cursor Auto picture
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced settings
Picture format
Mode selection
Auto adjustment
Clock
Mode
Red gain
Green gain
Blue gain
Red offset
Green offset
Blue offset
Color alignment
Noise reduction
Black stretch
Dynamic contrast
Gamma
120 PMR
4K UHD Upscaling
Macro Dimming
MPEG artifact reduction
Color enhancement
Custom color management
Blue stretch
Film mode
Tint
Custom color
management
Blue stretch
Mode
To set the color temperature to Personal,
Cool, Normal and Warm.
When you adjust the following settings,
Personal will be set automatically.
Cursor To decrease red
contrast
To increase red
contrast
Green gain
To decrease green
contrast
To increase green
contrast
Blue gain
To decrease blue
contrast
To increase blue
contrast
Red offset
To decrease red
brightness
To increase red
brightness
Green offset
To decrease green
brightness
To increase green
brightness
Blue offset
To decrease blue
brightness
To increase blue
brightness
Red gain
Color
alignment
Cursor Noise
reduction
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Black
stretch
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Dynamic
contrast
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Gamma
To select the desired setting, then press OK
(Very Dark Room, Dark Room, Normal, Bright Room and
Very Bright Room)
120 PMR
Off
To set 120 PMR to Off
On
To make the video appear smoother
4K UHD
Upscaling
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Macro
Dimming
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
MPEG
artifact
reduction
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
To increase color
with only selected
color
Saturation
To decrease color
with only selected
color
Brightness
To decrease
To increase
brightness with only brightness with only
selected color
selected color
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Off
Film mode
Cursor To rotate only
To rotate only
selected color tint in
selected color tint in
counterclockwise
clockwise direction
direction
Auto
To set film mode to off
To optimize the picture recorded by the
original film
Note(s)
• Mode selection is available only if
–The external input modes are selected HDMI 1, HDMI 2 or HDMI 3.
–The connected HDMI device is outputting a video signal.
Continued on next page.
30 .English
This selects sound modes for more spatial or surround sound
reproduction.
Sound
Before you begin:
You must set Home in Location. p. 33
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into standby mode.
1
2
3
Press and use to select Setup then press OK.
Use to select TV settings, then press OK.
Use to select Sound, then press OK.
Picture
Sound
Features
Installation
4
Sonic
Emotion
Premium
Sonic
Emotion
Off
To set Sonic Emotion to off
On
To set Sonic Emotion to on
Dialog
Enhancement
Off
To set Dialog Enhancement to off
On
To set Dialog Enhancement to on
Bass
Enhancement
Off
To set Bass Enhancement to off
On
To set Bass Enhancement to on
Absolute 3D
Sound
Off
To set Absolute 3D Sound to off
On
To set Absolute 3D Sound to on
This function keeps a constant Loudness differential between the TV
commercials and the programs.
Auto sound
Equalizer
Balance
Sonic Emotion Premium
Auto volume leveling
TV speakers
Headphone volume
Digital output format
Delta volume
Auto volume
leveling
Use to select the item you want to adjust, then press OK.
The following sound settings can be configured. Depending on the format
of the broadcasting, some sound settings are not available.
Auto sound
The customized settings you
defined using the Sound menu.
Standard
For normal TV viewing.
Clear sound for high action.
Movie
Powerful sound settings for a
cinematic experience.
Music
Optimized for music playback.
News
Set the anchor's voice at a
comfortable volume.
Adjust the tonal quality for each frequency.
Cursor Equalizer
Adjust the speakers to suit your listening preference.
Balance
Cursor Cursor To adjust the balance of the right and left speakers
To reduce volume differences
between the TV commercials and
the programs
TV speakers
Speakers
EasyLink
To output sound from the unit’s
speakers
To control audio output from your
connected EasyLink compliant
devices with VOL + / – by using this
unit's remote control.
Adjust headphone volume.
Headphone
volume
Cursor Cursor To decrease or increase volume
You can set the digital audio output format from SPDIF/ARC.
PCM
Digital output
format
Bitstream
To output PCM format
To output audio in its native format
as Bitstream to connected audio
receiver
If a channel or input device is too loud or too soft, navigate to that channel
or input device.
Cursor Cursor To adjust each level of tonal quality
Press BACK to go back to the previous menu.
On
On
Enhanced sound.
Vivid
Sports
To remove the Auto volume
leveling
You can select the audio output from the unit’s speakers or not. If your
amplifier is HDMI link function compatible and connected by an HDMI
cable to this unit, some sound operations such as volume up can be
changed by using this unit’s remote control. Make sure Master EasyLink
is set to On. p. 34
No output sound from the unit’s
Off
speakers
To set your TV to a predefined sound setting.
When you adjust the following settings (Equalizer,
Sonic Emotion Premium and Auto volume leveling),
Personal sound will be set automatically.
Personal
Off
Cursor Provides the ability to set a custom volume level
for the current channel or input source.
Delta volume
If the source volume is too loud, set a negative
value (-1 to -12)
If the source volume is too soft, set a positive value
(+1 to +12)
Continued on next page.
31 .English
You can choose the size, font, color, background and other characteristics
of the caption text.
Features
1
2
3
Reset to
default
Press and use to select Setup then press OK.
Use to select TV settings, then press OK.
Use to select Features, then press OK.
Picture
Sound
Features
Installation
Caption settings
Sleeptimer
Digital audio preferences
Power indicator
Digital caption
options
You can reset the status of digital
caption options.
You can change closed captioning font style, size,
color and transparency.
(Font style, Font size, Font color and Font
opacity)
You can change background color and
transparency of the displayed caption.
(Background color and Background opacity)
You can change edge color and type of the
displayed caption text.
(Edge color and Edge type)
Picture display
So, you must be Philip. Hi!
I’m pleased to meet you.
4
Text font
(Font style, Font size, Font color and Font opacity)
Text edge
(Edge color and Edge type)
Adjust the following items.
Caption settings
Closed captions displays the audio portion of the program as
superimposed text over the video.
1
Use to select Caption settings, then press OK.
Caption settings
Sleeptimer
Digital audio preferences
Power indicator
Off
Closed captions
On
Caption service
Digital caption service CC w/ mute
Digital caption options
Background
(Background color and Background opacity)
• Review your setting choice made above by looking in the upper left
corner of the displayed setting box (not all selections show the
differences selected).
Cable / NTSC (Analog) TV operation
The primary closed captions and
text services. The closed captions
or text is displayed in the same
CC-1 and T-1
language as the program’s dialog
(up to 4 lines of script on the TV
screen).
Caption service
Closed captions
Off
Closed caption is not displayed.
On
Closed caption is always displayed.
CC w/ mute
Closed caption is displayed when
the sound is off.
Digital TV operation
In addition to the basic closed caption, DTV has its own closed caption
called digital caption service. Use this menu to change the settings for
digital caption service.
Digital caption
service
CS-1 to CS-6
CC-3 and
T-3
Serve as the preferred data
channels. The closed captions or
text is often a secondary language.
Rarely available and broadcasters
CC-2, CC-4, use them only in special conditions,
T-2 and T-4 such as when CC-1 and CC-3 or T-1
and T-3 are not available.
• There are 3 display modes according to programs:
Paint-on
Displays characters on the TV screen immediately.
Pop-on
Once characters are stored in memory, they are
displayed all at once.
Roll-up
Displays the characters continuously by scrolling
(max. 4 lines).
Select one of these before
changing any other item in Caption
settings menu. Choose CS-1 under
normal conditions.
Continued on next page.
32 .English
Note(s)
To prioritize VI-Visually Impaired streaming or HIHearing Impaired streaming: The setting for
handicapped users (Main audio, Visually
Impaired or Hearing Impaired).
• Digital caption service that you can switch differs depending on the broadcast description.
captioning service may not be controlled by this unit’s menu options if you are watching
• Closed
television through an external cable or satellite set-top box. In which case you will need to use
Accessibility
• The captions do not always use correct spelling and grammar.
all TV programs and product commercials include closed caption information. Refer to your
• Not
area TV program listings for the TV channels and times of closed caption shows. The captioned
Audio language
To set your preferred language in the audio
streaming (English, Spanish or French).
Primary audio
selection criteria
To set TV priority based on either of the above
settings: (Accessibility or Audio language).
the menu options on the external set-top box to control closed captioning.
programs are usually noted in the TV listings with service marks such as CC.
all captioning services are used by a TV channel during the transmission of a closed caption
• Not
program.
caption will NOT be displayed when you are using an HDMI or a component
• Closed
connection.
show the closed caption on your TV screen, broadcast signal must contain the closed caption
• To
data.
all TV programs and commercials have the closed caption or all types of the closed
• Not
caption.
Caption's
and text may not exactly match the TV voice.
•
• Changing channels may delay the closed caption for a few seconds.
• Adjusting or muting the volume may delay the closed caption for a few seconds.
symbols and other grammatical shortcuts may be used in order to keep pace
• Abbreviations,
with the on-screen action. This is not a malfunction.
caption or text characters will not be displayed while the Home menu or functions display
• The
is shown.
If
a
black
appears on the TV screen, this means that the closed caption is set to the text
• mode. Tobox
clear the box, select CC-1, CC-2, CC-3 or CC-4.
receives poor quality television signals, the captions may contain errors or there might
• Ifbethenounit
captions at all. Some possible causes of poor quality signals are:
•
•
•
To set power indicator on or off.
1
Use to select Power indicator, then press OK.
Caption settings
Off
Sleeptimer
On
Digital audio preferences
Power indicator
–Automobile ignition noise
–Electric motor noise
–Weak signal reception
–Multiplex signal reception (ghosts or screen flutter)
–Data dropout and pixelation (for DTV only)
The unit retains the closed caption setting if the power fails.
When the unit receives special effects playback signal (e.g. search, slow and still) from a VCR’s
video output channel (ch3 or ch4), the unit may not display the correct caption or text.
The EUT setting that satisfies § 79.102 (e) is as follows:
–Font: Mono-font
–Character size: Large
Sleeptimer
Sleep timer can set the unit to go into standby mode after an incremental
period of time.
1
2
Power indicator
Use to select Sleeptimer, then press OK.
Use repeatedly to change the amount of time
(increases the time by 5 minutes up to 180 minutes).
• Each press of will decrease the time by 5 minutes.
• Press INFO once to call up the display for checking the remaining
time.
Installation
1
2
3
Press and use to select Setup then press OK.
Use to select TV settings, then press OK.
Use to select Installation, then press OK.
Picture
Sound
Features
Installation
Language
Preferences
Restore default settings
• To cancel the sleep timer, press repeatedly until “0” is
displayed.
Digital audio preferences
You can set the interpretive broadcasting by an audio explanation.
1
Use to select Digital audio preferences, then press OK.
Accessibility
Caption settings
Audio language
Sleeptimer
Digital audio preferences Primary audio selection criteria
Power indicator
4
Adjust the following items.
Continued on next page.
33 .English
HDMI mode
Language
If there are issues with picture/color and/or sound when connecting an
external device using the HDMI port, please try switching the HDMI mode
following the instructions below.
You can set the language for the on-screen display.
1
Use to select Language, then press OK.
Picture
Sound
Features
Installation
Language
English
Preferences
Français
Restore default settings Español
1
2
3
4
5
6
7
Press and use to select Setup, then press OK.
Use to select TV settings, then press OK.
Use to select Installation, then press OK.
Use to select Preferences, then press OK.
Use to select HDMI mode, then press OK.
Use to select HDMI1, HDMI2 or HDMI3, then press OK.
Use to select Legacy (Compatibility), then press OK. If this does
not solve the problem, then try Normal.
• When switching the HDMI configuration (Legacy œ Normal), the
screen will black out for a moment, then come back on.
Note(s)
2
Use to select English, Español or Français, then press OK.
Note(s)
• If you need the English menu instead of the Spanish or French menu’s, press .
Use to select Configuración or Configuration, then press OK.
Use to select Ajustes de TV or Réglages de la télévision, then press OK.
Use to select Instalación or Installation, then press OK.
Use to select Idioma or Langue, then press OK.
Use to select English, then press OK.
Press to exit the Home menu.
Preferences
You can set the unit to reduce the power consumption or adjust the
backlight brightness in Location setting.
EasyLink allows you to operate your connected EasyLink device.
Setting your location to home
Choosing Home gives you full flexibility to change predefined settings for
picture and sound.
1
2
TV placement
To apply the best settings for your TV, select wall mount or stand mount.
1
2
3
Use to select Preferences, then press OK.
Use to select TV placement, then press OK.
Use to select Wall mounted or On a TV stand, then press OK.
Retail Demo
When you set Location to Retail, E-sticker (Electronic Sticker) is displayed.
E-sticker can be turned off using procedure below.
1
2
3
Use to select Preferences, then press OK.
Use to select Retail Demo, then press OK.
Use to select Off, then press OK.
Use to select Preferences, then press OK.
Use to select Location, then press OK.
Language
Location
Preferences
EasyLink
Restore default settings HDMI mode
TV placement
Retail Demo
3
HDMI connector with HDMI mode set to Legacy (Compatibility) supports up to UHD 30P,
• The
while The HDMI connector with HDMI mode set to Normal supports up to UHD 60P.
Switching
HDMI mode between Normal and Legacy (Compatibility) may cause loss of
• HDMI CECthe
functionality in certain cases.
Retail
Home
Use to select Home, then press OK.
The unit will be set up with predefined settings for
Retail
retail displays. In this setting, you can set the backlight
brighter.
The unit is set to maximize the energy efficiency for
home setting and it can be adjusted through a choice
Home
of picture and sound quality selections according to
your preference.
Note(s)
•
You must set Home in the menu. Otherwise, personalized picture and sound settings will not
be memorized after the unit goes into standby mode.
Continued on next page.
34 .English
Set the Master EasyLink to On or Off. The following additional settings
will be grayed out when you set them to Off.
Use Philips EasyLink
Your TV supports Philips EasyLink, which enables one-touch play and
one-touch standby between EasyLink-compliant devices. Compliant
devices must be connected via an HDMI connector.
Master
EasyLink
Off
Disables all EasyLink.
On
Selects if you have connected an
external device that is compatible with
the EasyLink function.
One-touch play
When you connect your TV to devices that support one-touch play, you
can control your TV and the devices with one remote control. For
example, when you press (Play) on your DVD remote control, your TV
automatically switches to the correct channel to show the DVD content.
This unit will turn on when the power on signal is sent from your connected
EasyLink device.
Off
This unit stays in Standby mode even
if you turn on your connected EasyLink
device.
On
This unit turns on automatically when
you turn on your connected EasyLink
device.
Auto TV On
One-touch standby
When you connect your TV to devices that support standby, you can use
your TV remote control to put your TV and all connected HDMI devices
in standby mode. You can perform one-touch standby using the remote
control from any of the connected HDMI devices.
You can operate some functions such as disc playback or call up the
menu of the connected devices, by using this unit’s remote control.
System audio control
When you connect your TV to HDMI CEC compliant devices, your TV can
switch automatically to play audio from the connected device. To use
one-touch audio, you must map the audio input from the connected
device to your TV. You can use the remote control from the connected
device to adjust the volume.
RC key
forwarding
Off
Disable RC key forwarding.
On
PLAY, PAUSE. / STOP. /
FWD/ / REV0 / VOL + / – / (MUTE) / OPTIONS / / OK /
BACK / the NUMBER buttons can
be used to control your connected
EasyLink devices by this unit’s remote
control.
Remote control (RC) key forwarding
RC key forwarding allows you to control EasyLink-compliant devices
using your TV remote control.
HDMI-ARC (Audio Return Channel) (HDMI 1 only)
HDMI-ARC allows you to use Philips EasyLink to output TV audio directly
to a connected audio device, without the need for an additional digital
audio cable. Be sure that the device is HDMI CEC and ARC compliant, and
that the TV is connected to the device using an HDMI cable attached to
both HDMI-ARC connectors.
Note(s)
• Pause may not work properly on some devices even if they are EasyLink (HDMI CEC)
compliant.
HDMI-ARC allows you to use Philips EasyLink to output TV audio directly
to a connected audio device, without the need for an additional digital
audio cable.
HDMI-ARC
(HDMI 1 only)
Note(s)
• Philips does not guarantee 100% interoperability with all HDMI CEC devices.
• The EasyLink-compliant device must be switched on and selected as the source.
Off
Disable HDMI-ARC.
On
You can output TV audio through the
HDMI cable solely, provided both the
TV and device are HDMI-ARC
compliant.
EasyLink (HDMI CEC)
This function allows you to operate the linked functions between our
brand devices with a EasyLink feature and this unit connecting through
an HDMI cable. You must connect this unit to our brand EasyLink devices
and be sure its EasyLink (HDMI CEC) setting is also set to on.
1
2
3
Use to select Preferences, then press OK.
Use to select EasyLink, then press OK.
Return your settings to default values
You can return settings to their default values.
1
2
Use to select Restore default settings, then press OK.
Use to select Reset AV settings or Reset all settings, then press
OK.
Use to select the item you want to adjust, then press OK.
Location
EasyLink
HDMI mode
TV placement
Retail Demo
Master EasyLink
Auto TV On
RC key forwarding
HDMI-ARC
Off
On
Reset AV settings
Return picture and sound settings to their default
values. The channel installation settings are not
affected.
Reset all settings
Return all the settings to their default values.
Continued on next page.
35 .English
Search for channels
Channel installation
Be sure the RF cable is correctly connected to this unit and you are
registered with your cable TV provider when you install cable channels.
Be sure the RF cable is correctly connected to this unit and you are
registered with your cable TV provider when you install cable channels.
1
2
3
Press and use to select Setup, then press OK.
Installation mode
Use to select Search for channels, then press OK.
1
2
3
Use to select Start, then press OK.
Install channels
You can search and store all channels. If you move the unit to a different
area after the initial setting, it is recommended to perform
Autoprogramming.
4
5
Use to select Installation mode, then press OK.
Use to select Antenna or Cable, then press OK.
• When Antenna is selected, the TV detects antenna signals. It
searches for DTV and analog TV channels available in your area.
• When Cable is selected, the TV detects signals supplied by cable.
It searches for DTV, analog TV and cable channels available in your
area.
Use to select Antenna or Cable, then press OK.
Press OK on Start.
Uninstall channels
• When the scanning and memorizing of available channels is
completed, the lowest memorized channel will be displayed.
6
Use to select Channel installation, then press OK.
Follow the on-screen instructions to complete the installation.
System searching. Please
wait...
Digital channels found: 0
Analog channels found: 0
Auto programming may take
Total progress:
more than 20 minutes to
complete.
The channels selected here can be skipped when selecting the channels
using CH + / –.
Those channels can still be selected with the NUMBER buttons.
1
2
3
Use to select Channel installation, then press OK.
Use to select Uninstall channels, then press OK.
Use to select the channel you want to remove, then press OK.
• The removed channels are not displayed on the list of favorite
channels.
• To reactivate a removed channel, use then press OK.
12
Stop
34
Channel settings
1
2
3
Press and use to select Setup, then press OK.
Use to select Channel settings, then press OK.
Adjust the following items.
Installation mode
Channel installation
Uninstall channels
Child lock
Change PIN
Digital audio language
Mono/Stereo
Continued on next page.
36 .English
TV ratings lock
Child lock
You can prevent your children from watching certain programs or certain
channels by locking the TV controls and by using ratings.
1
Use to select Child lock, then press OK.
Channel installation
Child lock
Change PIN
Digital audio language
Mono/Stereo
TV ratings lock
Movie ratings lock
Canadian English rating
Canadian French rating
Region ratings lock
TV ratings lock
Movie ratings lock
Canadian English rating
Canadian French rating
Region ratings lock
All
None
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Movie ratings lock
2
Use the NUMBER buttons to enter the 4-digit numbers for your PIN
code.
• When you have not set up your PIN code, enter 0, 0, 0, 0.
• When the PIN code is correct, Child lock menu is displayed.
TV ratings lock
Movie ratings lock
Canadian English rating
Canadian French rating
Region ratings lock
See the following description for setting each item.
Channel installation
Child lock
Change PIN
Digital audio language
Mono/Stereo
TV ratings lock
Movie ratings lock
Canadian English rating
Canadian French rating
Region ratings lock
All
None
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Note(s)
US movie
ratings
All
NR
G
PG
PG-13
R
NC-17
X
US TV
ratings
Description
All ratings locked including no rating
All
NR
None
No rating
–
TV-Y
Appropriate for all children
–
TV-Y7
Appropriate for all children 7 and older
G
TV-G
General audience
PG
TV-PG
Parental guidance suggested
PG-13
–
Unsuitable for children under 13
• When you select the higher rating and set it to , the lower ratings will be blocked
–
TV-14
Unsuitable for children under 14
• To remove all blocks place a check in the All box and then remove that check to remove all
R
–
Restricted under 17 requires
accompanying parent or adult guardian
• Region ratings lock will be available when the unit receives a digital broadcast using the new
NC-17
–
No one under 17 admitted
• To block any inappropriate programs, set your limits in TV ratings lock, Movie ratings lock and
X
TV-MA
automatically.
blocks.
rating system.
Region ratings lock.
• For the United States, the unit may download the region ratings lock table, if required.
• The Canadian rating systems on this unit are based on CEA-766-A and CRTC policy.
Setting TV and movie ratings
Movie ratings lock is the rating system created by MPAA. TV ratings lock
has controlled access to individual programs based on their age ratings
and content rating.
3
Use to select TV ratings lock or Movie ratings lock, then press
OK.
4
Use to select the desired rating, then press OK repeatedly to
switch between block and view.
• indicates that the rating is locked (Blocked).
• indicates that the sub rating is locked (Blocked).
• indicates that the rating is not locked (Viewable).
Mature audience only
To set the sub ratings (displayed in the right column)
For TV ratings lock, you can further set the sub ratings to block specific
elements of programming. To set the sub ratings, follow the step below.
Use to select the desired rating, then press OK repeatedly to
switch between and .
TV ratings lock
Movie ratings lock
Canadian English rating
Canadian French rating
Region ratings lock
All
None
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Fantasy Violence
Continued on next page.
37 .English
US TV ratings
Sub rating
TV-Y7
Fantasy Violence
TV-PG
Violence
Sex
Language
Dialog
TV-14
Violence
Sex
Language
TV-MA
Change PIN
Although the default PIN code (0000) is supplied with the unit, you can
set your own PIN code.
1
2
3
Press the NUMBER buttons to enter the new 4-digit PIN code.
Note(s)
•
• You cannot block a sub rating if the main rating is set to .
• Changing the category to or automatically changes all its sub ratings to the ( or ).
Canadian English or Canadian French ratings
You can select the rating for Canadian English or Canadian French
broadcasting.
3
Use to select Canadian English rating or Canadian French
rating, then press OK.
4
Use to select the desired rating, then press OK repeatedly to
switch between block and view.
• Make sure new PIN code and confirm PIN code must be exactly the same. If they are different,
the space is cleared for reentering.
• If you have forgotten your PIN code, enter 07 1 1 to reset the PIN code.
Digital audio language
You can select the audio language while your TV is receiving the digital
broadcasting.
1
Canadian
French rating
Exempt program
E
C8+
–
For all children
–
For all children 8 and older
General audience
G
8 ans+
Unsuitable for ages under 8
PG
–
Parental guidance suggested
–
13 ans+
Unsuitable for ages under 13
14+
–
Unsuitable for ages under 14
–
16 ans+
Unsuitable for ages under 16
18+
18 ans+
Adult audience only
To select the language according to your
preference.
(It differs depending on the program.)
Mono/Stereo
Cable / NTSC (Analog) TV operation
Locked all ratings
All
C
Description
Use to select Digital audio language, then press OK.
Digital audio
language
• indicates that the rating is locked (Blocked).
• indicates that the rating is not locked (Viewable).
–
Press the NUMBER buttons to enter the current 4-digit PIN code.
• Enter PIN code again to confirm.
Note(s)
Blocked sub rating's will appear beside the main rating category in TV ratings lock menu.
Canadian
English
rating
Use to select Change PIN, then press OK.
You can select an audio format while your TV is receiving the analog
broadcasting.
1
2
Use to select Mono/Stereo, then press OK.
Use to select Mono, Stereo or SAP (Second Audio Program),
then press OK.
Note(s)
• The V-Chip can block non rated programs as per “CEA-608-E sec. L.3”. If the option to block
NR, None or E programs are used in Movie ratings lock, TV ratings lock, Canadian English
rating or Canadian French rating accordingly “unusual results may occur and the unit may not
receive emergency bulletins or other types of programming”: / Emergency bulletins (Such as
EAS messages, weather warnings and others) / Locally originated programming / News /
Political / Public service announcements / Religious / Sports / Weather.
Continued on next page.
38 .English
Wireless setting
Connect to network
Setup network connection settings in order to use Net TV or network
upgrade functions.
1
2
• The meanings of abbreviations are defined as below.
: Wireless LAN access point
: Wireless network name
AP
SSID
Select to use a wireless LAN to connect to the internet by a wireless
connection.
Use to select Wireless, then press OK.
Use to select the desired setting, then press OK, and follow the
on-screen instructions.
• The key entry screen will appear when you select SSID, WEP /
Easy Connect
Select this setting if your router has an easy
connect button. Start scanning for wireless
networks on the TV after pressing the easy
connect button on your router. If connection test
fails, refer to the router’s manual for more details.
Scan
Search for wireless networks automatically and
select the wireless network name (SSID) from the
list.
Manual entry
Set up the connection to the wireless LAN Access
Point (AP) (e.g. wireless router) manually by
entering the wireless network name (SSID).
others or proxy address.
Network settings
If your router has an easy connect feature, select Easy Connect and press OK.
If your router does not have an easy connect feature, select Manual and press OK.
Text
_ ? ! g
Pin code
o
ode
h
a
b
c
d
e
f
j
k
l
m
n
o
i
p q r s
t u v
Easy Connect
. , @ ’
abc
w x y z
Manual
ABC
123+/;
OK
All clear
Cancel
Clear
123
• Enter the key of the selected wireless network using , then
press OK.
Clear
All clear
abc
ABC
123+/;
Cancel
OK
1
2
:
:
:
:
:
:
:
Clear the entered number or word.
Clear all the entered numbers or words.
Switch to the small letter mode.
Switch to the capital letter mode.
Switch to the numeral and symbol mode.
Shows the cancellation display.
Set the entered number or word.
* Easy Connect cannot be used when the security protocol is set to WEP.
Change the Access Point’s security mode from WEP to others
(recommended).
Wired setting
Select to use an Ethernet cable to connect to the internet by a wired
connection. Please purchase shielded Ethernet cables at your local store
and use it when you connect to network equipment.
1
Use to select Wired, then press OK.
• Connection test will start automatically.
p. 41
Press and use to select Setup, then press OK.
Use to select Connect to network, then press OK.
Network settings
This TV can be connected to
your home network.
Select your connection type.
Cancel
3
Wireless
Wired
123
Adjust the following items.
Continued on next page.
39 .English
Network settings
1
2
3
Press and use to select Setup, then press OK.
Use to select Network settings, then press OK.
Adjust the following items.
Manual network settings
1 Use to select Manual network settings, then press OK.
Manual network settings
Connection test
Setting status
Home network
Wake-on-LAN(DIAL)
Net TV
Samba interactive TV settings
Reset network settings
Network selection
Wireless network setting
IP configuration
Proxy configuration
Wireless network setting
This menu is displayed only when you set Wireless in Network selection.
In order to use a wireless network, you must set up a connection to the
AP (e.g. wireless router).
2
Use to select Wireless network setting, then press OK.
Auto
Search for wireless networks automatically and select the SSID from the
list.
3
4
Use to select Auto, then press OK.
The list of wireless networks will be displayed. Use to select the
appropriate the SSID, then press OK.
Auto
Manually enter your SSID
Easy Connect
Pin code
Manual
Router 1
Router 2
Router 3
Router 4
Network selection
2
3
• If you select the SSID with
, WEP*2 / others Key entry screen will
appear. Enter the WEP*2 / others key of the selected wireless
network using , then press OK.
• If you select the SSID has an easy connect, the easy connect setting
screen will appear. Use to select a setting, then press OK.
Select this setting if your router has an easy
connect button. Start scanning for wireless
networks on the TV after pressing the easy
Easy Connect
connect button on your router. If connection test
fails, try Easy Connect again.*1 If it fails then refer
to the router’s manual for more details.
Use to select Network selection, then press OK.
Use to select the desired setting, then press OK.
Wired
Wireless
If you connect to an Ethernet cable, select Wired
to connect to the internet.
If you have a router with easy connect function,
select Wireless to connect to the internet.
Pin code
Select this setting if your router has an easy
connect feature but does not have an easy
connect button. Enter the 8-digit PIN code shown
on your TV in the Router settings menu via PC
before Connect is selected.
Manual
If your wireless network with authentication setting
(WEP*2, others), WEP*2 / others Key entry screen
will appear. Enter the WEP*2 / others key of the
selected wireless network using , then
press OK.
Easy Connect cannot be used when the security protocol is set to
WEP. Change the Access Point’s security mode from WEP to others
(recommended).
*2
WEP is not recommended to be used due to its major security flaws.
Change the security protocol on the wireless router to others
(recommended) mode.
Confirmation message will appear. Select OK to complete the settings.
*1
Note(s)
• For a wireless network with authentication setting, key icon appears to the right hand of the
SSID.
• Signal icon shows the strength of the signal.
• WEP / others key appears as asterisks on the confirmation screen.
• The wireless LAN supports following specifications.
*2
–Wireless standards: IEEE 802.1 1 a/b/g/n/ac
–Frequency spectrum: 2.4GHz / 5GHz
–Security protocol: WEP*2 / others
Continued on next page.
40 .English
Manually enter your SSID
Set up the connection to the AP (e.g. wireless router) manually by entering
the SSID.
3
Use to select Manually enter your SSID, then press OK.
• AP (e.g. wireless router) SSID entry screen will appear.
4
Enter the SSID using , then press OK.
Use to select the authentication setting of the selected wireless
network.
• For a wireless network with authentication setting, select the
authentication setting, according to the security type of the wireless
network.
XXXXXXXXXXXXXX
Auto
Manually enter your SSID
None
WEP
Others
IP configuration
In following cases, select IP configuration to set each setting as
necessary.
–When connection test failed with the setting of Connection test.
–When instructed by your Internet service provider to make specific
settings in accordance with your network environment.
2
3
Use to select IP configuration, then press OK.
Use to select a setting, then press OK.
Network selection
Wireless network setting
IP configuration
Proxy configuration
IP setting
mode
None
Set the authentication setting to None.
WEP
Set the authentication setting to WEP*.
Others
Set the authentication setting to Others.
• For a wireless network without authentication setting, select None.
• If you select WEP* or Others, WEP* / others Key entry screen will appear.
Enter the WEP* / others key of the selected wireless network using
, then press OK.
• Confirmation message will appear. Select Yes to complete the settings.
* WEP is not recommended to be used due to its major security flaws.
Change the security protocol on the wireless router to others
(recommended) mode.
*3
Auto
Manual
Sets the IP setting automatically.
Sets the IP setting manually.
IP address *1, 3
A set of numbers which are assigned to
devices participating in a computer
network.
Subnet mask *1, 3
A mask which is used to determine what
subnet an IP address belongs to.
Default gateway *1, 3
IP address of the network device (such as
router) which provides internet access.
DNS setting
mode
*1
*2
Auto
Manual
IP setting mode
IP address
Subnet mask
Default gateway
DNS setting mode
Primary DNS
Secondary DNS
MAC address
Auto
Manual
Sets the DNS setting automatically.
Sets the DNS setting manually.
Primary DNS *2, 3
A server which handles the name and IP
address over the internet.
Secondary DNS *2, 3
A server which handles the name and IP
address over the internet.
MAC address
An address which recognizes the devices
connecting to the network. It is also called
hardware address.
Items can be selected only when IP setting mode is set to Manual.
Items can be selected only when DNS setting mode is set to
Manual.
Use or the NUMBER buttons to input numbers. When you use
to input numbers, then press OK or input the triple digits by
using the NUMBER buttons, the cursor moves to the next entry field.
When you use to input numbers, then press OK or input the
triple digits by using the NUMBER buttons at the rightmost entry
field, numbers will be stored and go back to the previous menu.
Note(s)
•
•
•
•
•
•
The range of input numbers is between 0 and 255.
If you enter a number larger than 255, the number will automatically be 255.
The manually entered number will be saved even if you change the setting to Auto.
If you want to enter 1 or 2 digit number in one cell, press OK to move on to the next cell.
If the entered IP address or the default gateway or primary DNS number is same as the default
setting, IP address setting will be set to Auto. (The manually entered number will be saved).
When IP address setting is set to Manual, the setting of DNS setting will automatically be Manual
and when IP address setting is set to Auto, you can set either Auto or Manual for DNS setting.
Continued on next page.
41 .English
Proxy configuration
2
3
Connection test
Use to select Proxy configuration, then press OK.
Use to select a setting, then press OK.
Network selection
Proxy setting
Wireless network setting Proxy address
IP configuration
Proxy port
Proxy configuration
Do not use
Use
Perform the following steps to test your internet connection after you
have connected an Ethernet cable or entered network settings such as IP
address, DNS settings, etc. manually.
1
Use to select Connection test, then press OK.
• Connection test will start automatically and the test result for home
network and internet will appear right after the connection test
finishes.
• “Testing…” is displayed while the connection test is in progress.
Home network
• Do not use is selected for default settings.
• If you need to change the proxy setting as instructed by your
internet service provider to set the designated proxy address and
port, select Use.
Proxy setting
Do not use
Use
Proxy address *
Proxy port *
Does not use the proxy server.
Use or the NUMBER buttons
to input numbers.
* Items can be selected only when Proxy setting is set to Use.
Note(s)
• The range of input numbers for the port number is between 0 and 65535. (If you enter a number
•
•
larger than 65535, it will be regarded as 65535.)
For proxy port, the selected ports may be blocked and not be able to use depending on your
network environment.
If the proxy address is entered with blank only, proxy server setting will be set to Do not use.
Description
Connection test is successfully
completed.
Pass
Pass
Fail
-
Connection test for home network
failed. Check the connection
settings.
Pass
Fail
Connection test for internet failed.
Check the connection settings.
• If the connection test for internet passes, speed test will start
2
automatically.
Press OK to go to the list on network status confirmation screen.
Note(s)
Uses the proxy server.
Selects the number or word by
using , then press OK.
Internet
• If the connection test for both home network and internet pass, you are ready to use Net TV or
network upgrade functions using the internet without making any additional settings.
• If the connection test fails, check if the Ethernet cable is connected to this TV properly or if you
have entered all the required details for the wireless LAN connection properly.
Setting status
You can check the status of network settings.
1
Use to select Setting status, then press OK.
• Network setting list will be displayed.
• MAC address of this unit will be displayed in the list.
Continued on next page.
42 .English
YouTube deactivation
Home network
You can turn your TV into a Digital Media Renderer (DMR), which can play
video, music and photo files stored on certified home media servers
connected to your home network.
1
2
Use to select Home network, then press OK.
Use to select the item you want to adjust, then press OK.
Renderer
Renderer name
Off
Disable DMR.
On
Enable this unit to play files using
DMC.
Displays the deactivation setting for YouTube.
1
2
3
4
Use to select Net TV, then press OK.
Use to select Net TV deactivation, then press OK.
Use to select YouTube, then press OK.
Use to select the desired option, then press OK.
Yes
Deactivate the connection to YouTube.
No
Activate the connection to YouTube.
Change the display name of this TV to other
devices on the home network.
Netflix ESN
Wake-on-LAN(DIAL)
You can turn your TV on when you use remote control via IP.
1
2
Displays the ESN information.
1
2
Use to select Wake-on-LAN(DIAL), then press OK.
To set Wake-on-LAN(DIAL) to off.
On
To set Wake-on-LAN(DIAL) to on.
Use to select Netflix ESN, then press OK.
• Displays the ESN (Electronic Serial Number) to get any services
from Netflix.
Use to select On or Off, then press OK.
Off
Use to select Net TV, then press OK.
Netflix software version
Displays the Netflix version.
Net TV
Displays the deactivation setting for Net TV and Netflix ESN information.
1
2
Use to select Net TV, then press OK.
Use to select Netflix software version, then press OK.
Netflix deactivation
Samba interactive TV settings
Displays the deactivation setting for Netflix.
Displays the setting for Samba TV.
1
2
3
4
To learn more about Samba TV, please visit https://www.samba.tv/
Use to select Net TV, then press OK.
Use to select Net TV deactivation, then press OK.
Use to select Netflix, then press OK.
1
2
Deactivate the connection to Netflix.
No
Activate the connection to Netflix.
Use to select the desired option, then press OK.
Note(s)
Use to select the desired option, then press OK.
Yes
Use to select Samba interactive TV settings, then press OK.
• Samba interactive TV settings item is displayed only when the country setting is USA.
Reset network settings
VUDU deactivation
You can reset the status of network settings.
Displays the deactivation setting for VUDU.
1
2
1
2
3
4
Use to select Net TV, then press OK.
Use to select Reset network settings, then press OK.
Use to select the desired option, then press OK.
Use to select Net TV deactivation, then press OK.
Use to select VUDU, then press OK.
Use to select the desired option, then press OK.
Yes
Deactivate the connection to VUDU.
No
Activate the connection to VUDU.
Continued on next page.
43 .English
Update software
USB upgrade
Philips continuously tries to improve its products and we strongly
recommend that you upgrade the TV software when upgrades are
available.
You can upgrade the software by using USB memory stick.
1
Connect your USB memory stick with the upgrade file to the USB
terminal on the side of your TV.
2
3
4
5
6
Press and use to select Setup, then press OK.
New software can be downloaded from our website at
www.philips.com/support using the model number of your TV to find
information.
You can update the software through these methods:
• Update with USB memory stick
• Update from digital broadcast Software auto-update p. 44
This section describes how to upgrade the software by using USB memory
stick.
Preparing for the software upgrade
You require the following equipment:
–A PC with web browsing capability
–An archive utility that supports the ZIP-format
(e.g. WinZip for Windows or StuffIt for Mac OS)
–An empty clean formatted USB memory stick
Use to select Update software, then press OK.
Use to select USB, then press OK.
Use to select the desired update file, then press OK.
Use to select Yes, then press OK.
• Read the on-screen instructions and confirm that you want to
Note(s)
continue with the installation.
• Only FAT / DOS-formatted portable memory is supported.
• Use only software upgrades that can be found on the Philips web site.
Software update is in progress. Please wait.
Do not remove the USB storage device or turn the TV off
while upgrade is in progress.
Warning
• When the software upgrade is running, don’t press any buttons.
• Do not remove the USB memory stick during the software upgrade.
• If an error occurs during the upgrade, retry the procedure or for further assistance, please contact
call center.
7
When the software upgrade is completed, press to set the unit into
standby mode, then remove the USB memory stick.
Downloading the software
8
Unplug the AC power cord for a few seconds from AC outlet and plug
it again.
Find information and software related to your TV and download the latest
software upgrade file to your PC.
9
Press again to turn the unit on.
Prepare a blank USB memory stick for software update. Access
www.philips.com/support and download the latest version software to
a blank USB memory stick using a PC by following the directions described
on the website.
• The TV starts up with the new software.
• For further assistance, please contact call center.
• Use a blank USB memory stick, download the software on your PC and
write the software in the root directory of the USB memory stick.
• For more details on how to download the software, please refer to the
website.
Continued on next page.
44 .English
Network updates
Software settings
You can update the software by connecting the unit to the internet.
1
2
3
4
Press and use to select Setup, then press OK.
Use to select Update software, then press OK.
Use to select Network, then press OK.
Use to select Yes, then press OK.
• This unit will then start checking for the latest FirmWare (software)
Software
1 Press and use to select Setup, then press OK.
2 Use to select Software settings, then press OK.
3 Use to select Software, then press OK.
version.
5
Confirmation message will appear.
Use to select Yes, then press OK.
• The unit will start downloading the latest FirmWare (software)
version.
• The unit will start updating the FirmWare (software) version.
• It may take a while to complete the updating.
6
When the software update is complete, press to make sure the unit
goes to standby mode.
7
Unplug the AC power cord for a few seconds from AC outlet and plug
it again.
8
Press again to turn the unit on.
Checking your current software version number
1
Use to select Software information, then press OK.
• The version and a description of the current software is displayed.
Software auto-update
You can download the latest software through the air and update this unit
automatically while the unit is in standby mode.
1
2
• The TV starts up with the new software.
For further assistance, please contact call center.
Use to select Software auto-update, then press OK.
Use to select the desired option, then press OK.
Off
Disable auto-update for latest software.
On
A message will appear if there is the latest software on
the network server.
Note(s)
•
In order to update software via the Internet, you must connect the unit to the Internet and set
up necessary settings.
Connect to network p. 38
Network settings p. 39
License
• Please do not unplug the AC power cord or Ethernet cable while executing the Network
Displays the licenses of open source software used in this unit.
• All settings will remain the same even if you update the software version.
• The version of net service will also be updated if newer version of net service is available when
1
updates.
Use to select License, then press OK.
• Licenses of open source software used in this unit are displayed.
updating the firmware.
• When you start up the TV or a net service after executing the software update, a message may
appear on the screen prompting for software update again. In this case, please select Update
to start USB update or network update. For further assistance, please contact call center.
Digital rights management
This product contains technology subject to certain intellectual property
rights of Microsoft. Use or distribution of this technology outside of this
product is prohibited without the appropriate license(s) from Microsoft.
1
Use to select Digital rights management, then press OK.
• Digital rights management is displayed.
Continued on next page.
45 .English
Wireless Screencasting
You can wirelessly cast or mirror the screen of your Smartphone, Tablet
or PC to the TV directly using Wireless Screencasting.
Using Wireless Screencasting
1
Press and use to select Wireless Screencasting, then press
OK.
• Wireless Screencasting mode screen appears.
View photos, play music and watch videos
using home network
On your TV you can play video, music and photo files stored on home
network certified home media servers connected to your home network.
In order to use this feature, you must connect this unit to the internet.
It is recommended that files to be played back in this unit are recorded
under the following specifications:
Picture (JPEG / Progressive JPEG)
JPEG
Upper limit
4000x4000 pixels
Progressive JPEG
Upper limit
1024x768 pixels
Music (MP3 / WAV / AAC)
The TV is now ready to accept a connection from your source device.
Sampling frequency
MP3
Constant bit rate
Sampling frequency
WAV
PHILIPS_Smart_TV
If you want to exit, please press "BACK" key.
If you want to manage connected device history, please press "OPTIONS".
Constant bit rate
Sampling frequency
AAC
2
Extension
Activate Wireless Screencasting feature on your device.
Video
codec
manual of the device.
64 kbps - 1.5 Mbps
8 kHz - 48 kHz
-
H.264, H.265/HEVC: 3840x2160@30fps,
MPEG: 1920x1080@60fps
.avi
.mpg,
.mpeg
MPEG1,
MPEG1,
MPEG2,
MPEG2,
MPEG4,
MPEG4
H.264
.ts,
.trp,
.tp
.vob
MPEG1,
MPEG2,
H.264,
H.265/
HEVC
MPEG1,
MPEG2
.mp4
.mkv
MPEG1, MPEG1,
MPEG2, MPEG2,
MPEG4, MPEG4,
H.264,
H.264,
H.265/ H.265/
HEVC
HEVC
• Select Your TV name on your device if needed.
• If PIN code is required on your device, please enter the 8-digit code
Audio
codec
Dolby Digital
YES
YES
YES
YES
YES
YES
Once connected, the screen of your device will appear on your TV
screen.
MPEG1/2 audio
layer1/2/3
YES
YES
YES
YES
NO
YES
LPCM
YES
YES
YES
YES
YES
YES
AAC-LC
YES
YES
YES
YES
YES
YES
appearing in the left-hand side of the TV screen.
• Press INFO to display your device name at the bottom of TV
screen.
• Press . or OK to pause playback. Press . or OK again to resume
playback.
Using Wireless Screencasting device list
In Wireless Screencasting device list, you can find the connected devices.
1
8 kHz - 48 kHz
Video (MPEG / VOB / AVI / MP4)
• For the operation of your device, please check the instruction
3
8 kbps - 320 kbps
Constant bit rate
Maximum video
Your TV name
16 kHz - 48 kHz
Press OPTIONS on remote when Wireless Screencasting mode is
on the TV screen.
• Only the connected device names are listed.
• It will be sorted from newest connection to oldest connection. A
Note(s)
• A maximum of 1,023 folders or files can be recognized.
• For the home server list, maximum of 16 servers can be displayed.
• The 10th and deeper hierarchies cannot be displayed.
• Unplayable files in the home server will not be displayed in the file list.
• For some files, playback is not available even if displayed in the file list.
• In order to play back the contents in home servers, the player and the servers must be connected
to the same access point.
• Compatibility and available playback function may differ depending on the home server.
• Video files with unsupported audio format will be skipped.
• The quality of the playback picture or audio differs depending on your network condition
maximum of 64 connections can be recognized.
• If you would like to delete a listed connection, press to select
the device name, then press OK first. Once the confirmation
message appears, please use to select Yes, then press OK.
Note(s)
• FUNAI CORPORATION, Inc. does not warrant Wireless Screencasting compatibility with all
source devices such as smartphones, tablets, laptops, etc. due to large variability in hardware,
firmware, drivers, software and implementation of wireless casting applications on these source
devices. Although FUNAI CORPORATION, Inc. will strive to enhance compatibility and
performance across a range of source devices, FUNAI CORPORATION, Inc. does not warrant
compatibility with specific source devices.
Continued on next page.
46 .English
Before using home network
View your pictures using home network
Follow the procedure below before using home network.
1
2
1
Connect this unit to the internet.
Connecting the TV to the internet using an Ethernet cable p. 14
or Connecting the TV to the internet using a wireless LAN p. 15
• Broadband internet connection of 8Mbps or faster is required.
2
Press to select a file or a folder.
Press OK or . to start a slide show of the files.
• Press OK or . to pause the slide show.
The . icon appears.
• Press 0 or / to move between images.
• Press BACK or . to stop the slide show.
• Press OPTIONS to display the optional menu, then use to
Set up the necessary network connection settings.
Connect to network p. 38
select the desired item.
Using home network
Off
Sets repeat playback to off.
1
One
Sets repeat playback for a selected image file.
All
Sets repeat playback for all image files in the
current folder.
Repeat *1
Start home network media servers in your home network.
• For details, refer to the instruction book of the home network
certified device.
2
3
4
Press on the remote control.
Slide time *1
Short
Switches to the next image in 5 seconds.
Medium
Switches to the next image in 10 seconds.
Use to select Home Network.
Long
Switches to the next image in 15 seconds.
•
None
No effect when switching images.
This unit will start loading the home server list.
Dissolve
After loading, home server list will appear. Select a home server you
want to access, then press OK.
Transitions *1
Guide to home network
a
c
Audio
Photos
Video
Folder
Highway Blues
Video10
Blue hills
Server 1
Server 2
Server 3
Rotate *2
c
Current folder
Auto picture *1
Audio
Photos
Video
Folder
Highway Blues
Video10
Blue hills
Pushes the current image out from left.
Wipe left
Pushes the current image out from right.
Wipe up
Pushes the current image out from bottom.
The next image comes to the center from the
outside.
Box out
The next image goes to the outside from the
center.
0
Displays an image in its original direction.
90
Rotates an image 90 degrees clockwise.
180
Rotates an image 180 degrees clockwise.
Rotates an image 270 degrees clockwise.
1X
Displays an image in its original size.
2X
Magnifies a current image by 2 times.
4X
Magnifies a current image by 4 times.
Selects the picture mode according to your preference.
(Standard, Natural, Vivid, Sports, Movie, Game, Energy saving
and Internet video)
*1
You can set Repeat, Slide time, Transitions and Auto picture when
images are in slide show.
*2
You can set Rotate and Zoom when slide show is in pause mode.
d
Highway Blues
Artist
00:05:28
Pushes the current image out from top.
Box in
270
Zoom *2
b
Wipe right
Wipe down
b
Overlaps the next image on the current image.
e
Home server list
Folder / media icon
Group (folder) / file list
Image
Current file info
Continued on next page.
47 .English
Listen to music using home network
Watch videos using home network
1
2
1
2
Press to select a file or a folder.
Press OK or . to play the selected files.
• Press OK or . to pause, press OK or . again to resume.
• Press / to skip up the next file.
• Press 0 to skip down the previous file.
• Press . to stop playback.
• Press OPTIONS to display the optional menu, then use to
select the desired item.
Off
Sets repeat playback to off.
Sets repeat playback for a selected music
One
Repeat
file.
Sets repeat playback for all music files in
All
the current folder.
Off
Sets shuffle playback to Off.
Shuffle
Sets shuffle playback for all music files in
On
the current folder.
The sound will not be output from the
Off
unit's speakers.
The sound will be output from the unit's
On
speakers.
TV Speakers
You can control audio output from your
Speakers connected EasyLink compliant devices
EasyLink with VOL + / – by using this unit's remote
control.
Selects the sound mode according to your preference.
Auto sound
(Standard, Vivid, Sports, Movie, Music and News)
Press to select a file or a folder.
Press OK or . to play the selected files.
• Press OK or . to pause, press OK or . again to resume.
• Press / to fast-forward search.
• Press 0 to fast-backward search.
• Press . to stop playback.
• Press . to resume from the point at which playback was stopped.
Press OK to play from the beginning of the file at which playback
was stopped.
• Press CH + to play the next file.
• Press CH - to play the current file at the beginning.
Press CH - twice within 5 seconds to play the previous file.
• Press OPTIONS to display the optional menu, then use to
select the desired item.
Off
Sets repeat playback to off.
Sets repeat playback for a selected video
One
Repeat
file.
Sets repeat playback for all video files in
All
the current folder.
The sound will not be output from the
Off
unit's speakers.
The sound will be output from the unit's
On
speakers.
TV speakers
You can control audio output from your
Speakers connected EasyLink compliant devices
EasyLink with VOL + / – by using this unit's remote
control.
Selects the picture mode according to your preference.
Auto picture (Standard, Natural, Vivid, Sports, Movie, Game, Energy
saving and Internet video)
Selects the sound mode according to your preference.
Auto sound
(Standard, Vivid, Sports, Movie, Music and News)
Note(s)
• The resume information will be kept even when the unit is Turned off.
play another file while the previously viewed file is being resumed, the resume information
• Ifofyou
the previously viewed file will be deleted.
The
file
or the folder in resume stop mode will be highlighted in gray on List or Thumbnails.
•
Continued on next page.
48 .English
My Apps functions
Net TV
Net TV offers internet services for your TV. Use the TV remote control to
browse the Net TV pages. You can play movies, listen to music and much
more, all from your TV screen.
–Because Net TV is an online system, it can be modified over time to
better serve its purpose.
–Some Net TV services can be added, changed or stopped after some
time.
–You cannot download and save files or install plug-ins.
Remove App
1
2
Use to select Remove App, then press OK.
• The selected App will be removed from My Apps list.
Move App
1
2
Use to select the desired App, then press OPTIONS.
Use to select Move App, then press OK.
• The selected App icon will be smaller.
Before using Net TV
3
Follow the procedure below before using Net TV.
1
2
Use to select the desired App, then press OPTIONS.
Connect this unit to the internet.
Use to the point you want to place, then press OK.
Guide to App Gallery
Set up the necessary network connection settings.
(Refer to Connect to network p. 38)
a
App Gallery All
c
Using Net TV
1
b
Press NETTV.
• Net TV screen will appear, then use to select service icon.
• For the first time only, Terms of Use screen will appear. After
confirming the content, use to select Agree, then press OK.
Category menu:
Icon list:
Guide to Net TV menu screen
Page guide:
Net TV start screen
Now on TV
1
2
Featured Apps
1
2
List of category menu.
Displays unregistered net service icons on My
Apps list.
Displays the order of pages. The current page
will be highlighted.
Press NETTV, then use to select App Gallery.
Use to select the desired App in My Apps list, then press
OK.
• You can also choose from Category menu. Use to select
All, then use OK to select the desired category.
APP1
APP2
APP3
APP4
3
4
6
Option
Terms of Use Country: USA
5
• If you select Add, the selected App icon will be placed at the end
of My Apps list.
• If you select Add and move, the selected App icon will be smaller
and use to the point you want to place, then press OK.
Even if you press BACK to cancel this function, the selected App
icon will be placed at the end of My Apps list.
Now on TV
: Displays the image of the input under present
tuning.
Featured Apps
: Displays fixed net service icons.
Selected Apps
: Displays movable net service icons.
Country
: Selects what country you live in.
Terms of Use
: Displays a copy of net service.
Netflix
: http://www.netflix.com
: Remove or move App.
VUDU
: http://www.vudu.com
Option
Information on network services
For detailed information on 3rd party internet services, please visit the
service providers website:
For additional help, refer to the Frequently Asked Questions FAQs at
www.philips.com/support.
Select TV and enter your model number.
Continued on next page.
49 .English
Pandora operations
With this unit, you can instantly listen to personalized radio stations
streamed over the internet from Pandora.
To learn more about Pandora, please visit www.pandora.com
Activating Pandora
Creating a new station
By entering your favorite artists or tracks, Pandora selects music and
creates a new station for you on the basis of the entered information.
1
On the station list screen, Use to select New Station, then
press OK.
2
Enter a name of your favorite artist or tracks, then press OK while OK
is selected.
• Search result will appear on the right side of the TV screen.
• If the selection screen with the result type appears, use to select
In order to listen to internet radio streamed from Pandora via the internet,
you must create a Pandora account and activate this unit.
1
2
3
4
5
6
Press NETTV, then use to select PANDORA.
the desired type, then press OK.
3
Use to select I am new to Pandora., then press OK.
Use to select the desired station, then press OK to start the
playback.
Resumes the playback / pause the playback.
/.
Note the activation code and website address displayed on the TV
screen.
Resumes the playback.
.
Pauses the playback.
Follow directions on the website to create your account.
Skips to the next track.
On this unit, select Go Back and press OK to complete activation.
Note(s)
On your PC, visit the website address noted at step 4.
• On the Tool Menu, you can delete or rename the currently selected station.
Adding Pandora user accounts
You can add the Pandora user account.
1
2
3
4
5
Press NETTV, then use to select PANDORA.
Use to select I have a Pandora account., then press OK.
Guide to the player screen
On the player screen, you can set various options to the currently playing
track.
a
Enter your e-mail address, then press OK while OK is selected.
b
Enter a password, then press OK while OK is selected.
Use to select Sign In, then press OK.
American Oldies Radio
• Your account is added to the user list and player screen appears
ABC
by XXXXX
on XXXXX
on the TV screen.
4:52
0:00
Note(s)
• Pandora is available only in the United States.
• You can add up to 5 accounts.
c d e f g
Artist name
Album name
"
: Give thumbs up to the currently playing track.
Pandora will play tracks similar to the track.
#
: Give thumbs down to the currently playing
track. Pandora will skip and will not play the
track.
/.
!
: Displays artist name.
: Displays album name.
: Resumes the playback / pause the playback.
2
: Skips to the next track.
$
: Displays the Tool menu.
50 .English
5 Useful tips
FAQ
Question
Answer
• Check the antenna or cable connection to the main unit.
• Check the batteries on the remote control.
• Check if there is an obstacle between the infrared sensor window and the remote control.
• Test the IR signal output use IR signal check. p. 53
My remote control does not
work.
What should I do?
If okay, then possible infrared sensor trouble.
• Aim the remote control directly at the infrared sensor window on the front of the unit.
• Reduce the distance to the unit.
• Re-insert or replace the AAA batteries with their polarities (+/–) as indicated on the remote control battery area.
• When there is an infrared-equipped device such as PC near this unit, it may interrupt the remote control signal on this unit.
Move the infrared-equipped device away from this unit, change the angle of the device's infrared sensor or turn off the
infrared communication function.
How come the initial setup
appears every time I turn on
this unit?
• Make sure to complete the initial setup before the unit goes into standby mode.
• Autoprogram must be completed when you set up the unit for the first time or move it to a location where previously
unavailable channels are broadcast.
Why can I not watch some RF
signal TV programs?
• Make sure auto programming has been completed. p. 35
• The selected channel may not be broadcasting.
• When Auto programming is interrupted and not completed, some channels will not be received. Make sure to complete
the Autoprogram. p. 35
• The selected channel cannot be viewed by the Child lock setting. p. 36
• The unit requires some kind of antenna input. An indoor antenna (Digital or VHF / UHF), an external antenna (Digital or
VHF / UHF) or an RF coaxial cable from your wall cable or set-top box needs to be plugged into the unit.
How come there is no image
from the connected external
devices?
• Check if the correct input mode is selected by pressing SOURCE. p. 20
• Check the antenna, cable or other input connection to the unit.
• When using the component video connection check that the green (Y), blue (Pb/Cb) and red (Pr/Cr) connectors are
connected to their corresponding colored jacks on the unit.
When I enter a channel
number, why does it change
automatically?
• Many digital channels have alternate channel numbers. The unit changes the numbers automatically to the ones signifying
Why are captions not
displayed entirely?
Or why are captions delayed
behind the dialog?
• Closed captions that are delayed a few seconds behind the actual dialog are common for live broadcasts. Most captioning
How can I set the clock?
• There is no clock function on this unit.
• Although the default PIN code (0000) is supplied with the unit, the PIN code will be required once you set a PIN code in
My PIN code no longer
works, how can I change the
child lock setting?
When I start up the TV or a
net service, a message
appears on the screen
prompting for software
update again.
the broadcasting station's channel number. These basic numbers used for the previous analog broadcasts. (e.g., input
digital ch# 30 automatically changes to digital ch# 8.1)
production companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate, selective
editing is used to insure that the closed captions remain up-to date with the current TV screen dialog.
Child lock. p. 36
When you forget your PIN code, enter 07 1 1 in Change PIN to reset the PIN code. p. 37
• When you start up the TV or a net service after executing the software update, a message may appear on the screen prompting
for software update again. In this case, please select Update to start USB update or network update. p. 43
Continued on next page.
51 .English
Troubleshooting tips
If the unit does not perform properly when operated as instructed in this manual,
Please check the following Troubleshooting tips and all connections once before calling for service.
Power
No power
• Make sure the AC power cord is plugged in.
• Make sure that the AC outlet supplies the proper voltage, plug another electrical
appliance into the AC outlet to ensure that the AC outlet operates normally.
• If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit
to reset itself.
Remote
Control buttons do not work.
• Do NOT press more than one button at the same time.
• Ensure that no buttons on the remote control are depressed and move freely.
Universal remote control does not work properly.
• Refer to the User manual of the universal remote control for the Philips code.
Picture
Power is on but no screen image.
• Check whether the connection for the antenna, cable or set-top box is
connected correctly.
• Check whether all the cables to the unit are connected to the correct output jack on
your separate device like Blu-ray disc / DVD recorder.
• Make sure that the selected input mode is connected to the working input jack.
Check
if your computer is NOT in sleep mode when the input mode on this unit
•
is in PC mode. Tap any key on the computer keyboard to wake it up.
• Check if the correct input mode is selected by pressing SOURCE.
No color
• View other TV channels. The problem might be limited to the broadcasting
station.
• Adjust Color in Picture settings. p. 28
Picture poor
• Adjust Contrast and Brightness in Picture settings. p. 28
• For the best picture quality, watch “High Definition” wide screen programs. If the
HD content is not available, watch “Standard Definition” programs instead.
You see pixelation on the screen.
• When the capabilities of the unit exceed the capabilities of the digital
broadcasting, the signal will be increased to match the capabilities of the display
on the unit. This may cause pixelation, noise or trash.
Unusual picture appears and the TV does not operate.
• Press the power button first. If it does not solve, follow the procedure below.
Press the buttons on the remote control in the order shown below.
Unplug the AC power cord, then wait for 1 minute, and then plug it in again.
Sound
No sound is heard when using the HDMI digital connection.
• Some HDMI cables and devices may not be compatible with the TV due to
different HDMI specifications.
No sound, distorted sound or incorrect audio sound is heard when using the
HDMI-DVI connections.
• Make sure that the analog audio signals from the HDMI-DVI device are
connected to the analog audio input L/R jacks.
• When using Component analog video, Composite analog video or PC VGA
video, make sure that the analog audio (L/R) connectors are mounted into the
audio (L/R) input jacks.
Sound intermittent or no sound.
• Check if the audio cable is connected into the unit correctly.
You switch to a different input and the volume changes.
• This unit will memorize the volume level from the last time you adjusted it.
• If the volume of the sound from another device is higher or lower, then the
loudness will change.
• Make sure Auto volume leveling is set to On. p. 30
Picture & Sound
No sound with distorted picture occurs when using the HDMI digital connection.
• Some HDMI cables and devices may not be compatible with the TV due to
different HDMI specifications.
No picture or sound
• Check if the power is on.
• Check whether all the cables to the unit are connected to the correct output jack on
your separate device like Blu-ray disc / DVD recorder.
• View other TV channels. The problem might be limited to the broadcasting station
or weak signal strength.
• Unplug the AC power cord and wait for about 1 minute, then plug the AC power
cord and turn on the unit again.
• Check whether the connection of the antenna or cable / satellite set-top box is
connected correctly.
• Make sure that the selected input mode is connected to the working input jack.
• Check if your computer is NOT in sleep mode when the input mode of this unit
is in PC mode. Tap any key on the keyboard to wake up your computer.
• Make sure that the sound is not muted. Press so that the volume bar and
current volume level will appear on the TV screen.
• Make sure that the volume is NOT set to 0 or . If so, use VOL + / – to adjust to
the desired volume.
• Make sure that the headphone is NOT connected to the headphone audio
output jack.
• Make sure that the TV speakers is NOT set to Off.
• If there are issues with picture/color and/or sound when connecting an external
device using the HDMI port, please try switching the HDMI mode. (Refer to HDMI
mode p. 33)
Adjusted Picture or Sound settings are not effective every time the unit is turned
on.
• You must set Home in Location. p. 33 (Otherwise, the settings you adjusted
will not be memorized after the unit goes into standby mode.)
You see a distorted picture or hear an unusual sound. (Analog TV - NTSC
signal)
• You may be getting NTSC (Analog) TV signal (not HDTV signal) interference from
electrical appliances, automobiles, motorcycles or fluorescent lights.
• Try moving the unit to another location to see if this is the cause of the problem.
Ghosts, lines or streaks in picture.
• Electrical interference from nearby appliances may affect picture quality.
• View other TV channels. The problem might be limited to the broadcasting station
or weak signal strength.
Picture poor, sound intermittent or no sound
• View other TV channels. The problem might be limited to the broadcasting station
or weak signal strength.
Child and rating lock
Forgotten PIN code.
• Enter “07 1 1” to clear your password.
Screen
You switch to a different input and the screen size changes.
• This unit will memorize the viewing mode from the last time you used the
particular input modes.
The display image does not cover the entire screen.
• If you are using the unit as a PC monitor, make sure that Horizontal position and
Vertical position in Picture are set correctly. p. 28
• If you are watching TV or using the Composite video, Component video or HDMI
with 480i input, press FORMAT repeatedly to switch to various screen
modes.
Different color marks on the TV screen
• View other TV channels. The problem might be limited to the broadcasting
station, missing data or pixelation due to weak signal strength.
Continued on next page.
52 .English
Closed captions
Closed captions are displayed as a white box. No closed captions are displayed
in the closed captions-supported program.
• Interference from buildings or weather conditions may cause closed captions to
be incomplete if watching analog TV signals.
• Broadcasting station may shorten the program to insert advertisements.
The closed caption decoder cannot read the information of the shortened
program.
Black box is displayed on the TV screen.
• The text mode is selected for caption. Select CC-1, CC-2, CC-3 or CC-4.
Software update
A message appears on the screen prompting for software update again.
• When you start up the TV or a net service after executing the software update, a
message may appear on the screen prompting for software update again. In this
case, please select Update to start USB update or network update. p. 43
Network
Cannot connect to the network.
• Check if the Ethernet cable connection is properly made. Turn on the broadband
router and/or modem.
• Check the network settings.
• Check if the broadband router and/or modem is correctly connected.
Sometimes video quality is poor when using the wireless LAN.
• The wireless network connection quality varies depending on the distance or
obstacles (e.g. wall, basement, 2nd floor) between the TV wireless LAN adapter
and the wireless router (access point), from other wireless networks, and brand
and type of the wireless router (access point). When using the wireless LAN of
the TV, it is suggested to place the wireless router as close as possible to the
television.
Wireless LAN connection fails or wireless connection is poor.
• Check the installation location of the TV and wireless router (access point). Signal
quality may be affected for the following reasons.
– Interference of other wireless devices, microwaves, fluorescent lights, etc., are
placed nearby.
– There are floors or walls between the wireless router and TV.
– If the problems continue even after checking the above, try making a wired
LAN connection.
Cannot use the wireless connection.
• Check if the wireless LAN Access Point (AP) (e.g. wireless router) is oriented
properly or not placed too close between them.
• Once you have activated the wireless connection please wait 30 seconds for the
connection to be established after turning on the unit, before trying to access
network features such as Net TV.
Cannot use Netflix feature.
• Check if the network connection is properly made.
• Visit http://www.netflix.com on your PC and become a Netflix member.
• Some network services may not be available in your country.
Cannot add movies or TV episodes to the Instant Queue.
• Visit www.netflix.com on your PC.
Even though the speed of the internet connection improves during playback,
the picture quality of Netflix streaming movie does not improve.
• The picture quality does not change during playback. It differs depending on the
speed of internet connection at the time of loading.
Cannot use VUDU feature.
• VUDU is available only in the United States and Mexico.
• Check if the network connection is properly made.
Cannot rent or buy movies / TV episodes on VUDU.
• You need to activate the VUDU account. For detailed information, please visit
the service providers website at http://www.vudu.com
• Log into your account at http://my.vudu.com and check your payment
information.
The picture quality of a streaming movie (Netflix or VUDU) is poor.
• Check the speed of your internet connection. You need speeds of at least 8 Mbps
to this player for high quality uninterrupted playback.
Streaming movie (Netflix or VUDU) often stops or starts buffering during
playback.
• Contact your internet service provider to troubleshoot your internet connection
for speed and line quality. Consistent line quality and speed are very important
for internet video playback.
Cannot connect to the network while my PC is connected to the network.
• Check the content of your internet service contract to see if your internet service
provider prevents multiple terminals connecting at the same time.
Cannot use Easy Connect to connect to the access point.
• Connect the unit to the access point using scan or manual entry mode. If the
access point’s security mode is set to WEP*, change the setting to others
(recommended), then try Easy connect again. (For access point configuration,
please consult its user manual or manufacturer.)
* WEP is not recommended to be used due to its major security flaws. Change the security
protocol on the wireless router to others (recommended) mode.
Folder or files stored on home network media server are not displayed in the file
list or cannot be played back.
• Check the setting on your home media server. (Refer to the user manual of the
home media server.)
• Check the network connection and settings.
Cannot use Pandora feature.
• Check if the network connection is properly made.
• Pandora is available only in the United States.
• You must create a Pandora account and activate this unit.
Activating Pandora p. 49
Wireless Screencasting
• Connectivity with all Wireless Screencasting compatible devices is not
guaranteed.
• Devices that do not comply with Wireless Screencasting standards may have
compatibility issues.
Note(s)
• The LCD screen is manufactured to provide many years of useful life.
•
Occasionally a few non active pixels may appear as a fixed point of blue, green
or red.
This is not to be considered a defect in the LCD screen.
Some functions are not available in specific modes, but this is not a malfunction.
Read the description in this manual for more details on correct operations.
For additional troubleshooting, refer to the Frequently Asked Questions
or FAQs on www.philips.com/support.
53 .English
6 Information
Glossary
Maintenance
Analog TV (NTSC)
Cleaning
Acronym that stands for National Television Systems Committee and the
name of analog broadcasting standards.
Off the air analog TV signals are no longer being sent by major broadcasting
stations in the USA.
ARC (Audio Return Channel) (HDMI 1 only)
HDMI-ARC allows you to use Philips EasyLink to output TV audio directly to
a connected audio device, without the need for an additional digital audio
cable. Be sure that the device is HDMI CEC and ARC compliant, and that the
TV is connected to the device using an HDMI cable attached to both HDMIARC connectors.
• Clean the front panel and other exterior surfaces of the unit with a soft
microfiber cloth or lens brush. Before cleaning the panel, disconnect the
AC power cord.
• Never use a solvent or alcohol. Do not spray insecticide liquid near the
unit. Such chemicals may cause damage and discoloration to the
exposed surfaces.
• Do not spray any liquids on the screen or other exterior surfaces of this
unit. If liquids enter the unit, they could cause shorts, electric shocks or
fire damage.
Aspect ratio
The width of a TV screen relative to its height. Conventional TVs are 4:3 (in
other words, the TV screen is almost square); widescreen models are 16:9 (the
TV screen is almost twice as wide as its height).
CEC (Consumer Electronics Control)
This allows you to operate the linked functions between our brand devices
with CEC feature and this unit. We do not guarantee 100% interoperability with
other brands of CEC compliant devices.
Component video
This is a Video signal format that conveys each of 3 principal colors of light
(red, blue and green) through different signal lines. This allows the viewers to
experience picture colors as original as it is. There are several signal formats,
including Y / Pb / Pr and Y / Cb / Cr.
Dolby Digital
The system developed by Dolby Laboratories to compress digital sound. It
offers stereo sound (2ch) or multi-channel audio.
DTV (ATSC)
Abbreviation that stands for Advanced Television Systems Committee and
the name of the digital broadcasting standards.
E-sticker
E-sticker is showing set features, technical information, etc on this TV set that
is displayed on the TV screen mainly used by TV retailers. Previously the
information was on a printed sticker that was put on the display.
HDMI (High-Definition Multimedia Interface)
Interface that supports all uncompressed, digital audio / video formats
including set-top box, Blu-ray / DVD recorder or digital television, over a single
cable.
HDTV (High-Definition TV)
Ultimate digital format that produces high resolution and high picture quality.
PIN code
A stored 4-digit number that allows access to parental control features.
SAP (Secondary Audio Program)
Second-audio channel delivered separately from the Main-audio channel.
This audio channel is used as an alternate in bilingual broadcasting.
SDTV (Standard Definition TV)
Standard digital format that is similar to the analog TV picture quality.
Sonic Emotion Premium
Sonic Emotion Premium fills your surroundings with the right ambience,
clarifies voice, and details the sound stage, making your experience more
immersive and enjoyable.
Servicing
Should your unit become inoperative, do not try to correct the problem
yourself. There are no user serviceable parts inside. Call our toll free
customer support line found on the cover of this User manual to locate
an authorized service center.
IR signal check
If the remote control is not working properly, you can use a digital or cell
phone camera to see if it is sending out an infrared signal.
e.g.) With a digital camera:
Point the digital camera towards the remote
control infrared diode at the front of the
remote control. Press and hold any key on
the remote control and look at the camera
display. If an infrared pulsating light appears
on the display, the remote control is sending
out an IR signal.
Note: Some cameras may have an IR filter
or dual camera cell phones may have an IR filter in one of the camera's
and both will not display the IR signal.
54 .English
7 Specifications
Model #
Picture
Type
Diagonal screen size / Aspect ratio
Viewing Angles
Built-in Digital / Analog Tuner
Sound
Mono / Stereo
Power Output (RMS watts)
Equalizer
Ease of Use
SD (4:3 Source)
HD
Picture Format
(16:9 Source)
UHD
Photo Slide Show
Music Playback
Video Playback
Channel
Channel Coverage
CATV (Analog NTSC)
Tuning System
Channel Access
Connectivity
Component Video Input
(Y/Pb/Pr)
Composite Video Input
(Shared Y Green Terminal
with Component Video)
HDMI Input
Analog Audio L/R Input
PC Input
USB
Wireless LAN
Ethernet port
Digital Audio Output
Headphone Output
Power
Power Requirements
Temperature
Operating Temperature
55PFL5601
UHD (Ultra HD) (3840 x 2160 pixels 60Hz)
54.6”/ 16:9
178° (V) by 178° (H)
ATSC (Digital) / NTSC (Analog)
Mono, Stereo, Sonic Emotion Premium
10W x 2
5 Band
: Automatic / Super zoom / 4:3 / Movie expand 14:9 / Movie expand 16:9 / Wide screen
: Automatic / 4:3 / Wide screen / Full / Unscaled
: Full / Unscaled
JPEG, Progressive JPEG
MP3, WAV, AAC
MPEG1, MPEG2, H.264, MPEG4, H.265/HEVC
Over-the-Air DTV
: VHF: 2∼13
(ATSC)
UHF: 14∼69 (Each Channel may have e.g. 2.1∼2.9, 3.1∼3.9, etc)
Over-the-Air Analog : VHF: 2∼13
(NTSC)
UHF: 14∼69
2∼13, A∼W
W+1∼W+94 (Analog W+1∼W+84), A-5∼A-1, 5A
Channel Frequency Synthesized Tuning System
Direct Access Number Keyboard, Programmable Scan, Channel +(up) / -(down) and
PREV. CH (Previous Channel)
1
Supporting Video Signals : 480i/p, 720p, 1080i/p @60Hz
1
3 (selectable HDMI modes)
Supporting HDMI Video Signals : 480i/p, 720p, 1080i @60Hz, 1080p, 2160p @24/30/60Hz
Supporting HDMI Digital Audio Signals : LPCM, AC3, DD+
Supporting PC-Input Video Signal up to 4096 x 2160
1 (L Audio / R Audio)
Via VGA, HDMI and HDMI-DVI + Analog Audio L/R
1
Supporting wireless standards : IEEE 802.1 1a/b/g/n/ac (2.4GHz/5GHz)
1
1
Supporting Dolby Digital and Dolby Digital Plus
1
1/8 inch (3.5mm)
120V∼ +/- 10%, 60Hz +/- 0.5%
41 °F (5 °C) to 104 °F (40 °C)
• Specifications are subject to change without prior notice.
55 .English
8 Warranty
LIMITED WARRANTY
ONE (1) YEAR
WARRANTY COVERAGE:
This warranty obligation is limited to the terms as set forth
below.
WHO IS COVERED:
This product warranty is issued to the original purchaser or
the person receiving the product as a gift against defects in
materials and workmanship as based on the date of original
purchase (“Warranty Period”) from an Authorized Dealer. The
original sales receipt showing the product name and the
purchase date from an authorized retailer is considered such
proof.
WHAT IS COVERED:
This warranty covers new products if a defect in material or
workmanship occurs and a valid claim is received within the
Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a
product that is new or which has been manufactured from
new, or serviceable used parts and is at least functionally
equivalent or most comparable to the original product in
current inventory, or (3) refund the original purchase price of
the product.
Replacement products or parts provided under this warranty
are covered against defects in materials and workmanship
from the date of the replacement or repair for ninety (90)
days or for the remaining portion of the original product’s
warranty, whichever provides longer coverage for you. When
a product or part is exchanged, any replacement item
becomes your property and the replaced item becomes
company property. When a refund is given, your product
becomes company property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements can
result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:
This Limited Warranty applies only to new company
manufactured products that can be identified by the
trademark, trade name, or logo affixed to it. This Limited
Warranty does not apply to any hardware product or any
software, even if packaged or sold with the product, as
manufacturers, suppliers, or publishers may provide a
separate warranty for their own products packaged with the
bundled product.
The company is not liable for any damage to or loss of any
programs, data, or other information stored on any media
contained within the product, or other additional product or
part not covered by this warranty. Recovery or reinstallation
of programs, data or other information is not covered under
this Limited Warranty.
This warranty does not apply (a) to damage caused by
accident, abuse, misuse, neglect, misapplication, or
non-supplied product, (b) to damage caused by service
performed by anyone other than company approved
Authorized Service Location, (c) to a product or a part that
has been modified without written company permission, or
(d) if any serial number has been removed or defaced, or (e)
product, accessories or consumables sold “AS IS” without
warranty of any kind by including refurbished product sold
“AS IS” by some retailers.
This Limited Warranty does not cover:
• Shipping charges to return defective product.
• Labor charges for installation or setup of the product,
adjustment of customer controls on the product, and
installation or repair of antenna/signal source systems
outside of the product.
• Product repair and/or part replacement because of
improper installation or maintenance, connections to
improper voltage supply, power line surge, lightning
damage, retained images or screen markings resulting
from viewing fixed stationary content for extended
periods, product cosmetic appearance items due to
normal wear and tear, unauthorized repair or other cause
not within the control of the company.
• Damage or claims for products not being available for use,
or for lost data or lost software.
• Damage from mishandled shipments or transit accidents
when returning product.
• A product that requires modification or adaptation to
enable it to operate in any country other than the country
for which it was designed, manufactured, approved and/or
authorized, or repair of products damaged by these
modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verification
receipt can be provided.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE…
Contact the Customer Care Center at:
1-866-202-5960
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE
CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO
THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of
incidental or consequential damages, or allow limitations on
how long an implied warranty lasts, so the above limitations
or exclusions may not apply to you.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501
56 .English
License
FUNAI CORPORATION, Inc. hereby offers to deliver, upon request, a copy
of the complete corresponding source code for the copyrighted open
source code packages, on an “AS IS” basis, used in this product for which
such offer is requested by the respective licenses. This offer is valid up to
three years after the product purchase to anyone in receipt of this
information. To obtain source code, please contact FUNAI SERVICE
CORPORATION.
You should write to
Open Source Team, P&F USA, Inc.,
PO Box 2248, Alpharetta, GA 30023-2248.
FUNAI CORPORATION, Inc. disclaims any and all warranties and
representations with respect to such software and related source code
including quality, reliability, usability, and accuracy, and further disclaim
all express, implied, statutory or otherwise, including without limitation,
any implied warranties of title, non-infringement, merchantability, or
fitness for a particular purpose. FUNAI CORPORATION, Inc. shall not be
liable to make any corrections to the open source software or source code
or to provide any support or assistance with respect to it. FUNAI
CORPORATION, Inc. disclaims any and all liability arising out of or in
connection with the use of this software and/or source code.
FUNAI CORPORATION, Inc.
19900 Van Ness Avenue, Torrance, CA 90501
This product has been manufactured by and is sold
under the responsibility of FUNAI CORPORATION,
Inc., and FUNAI CORPORATION, Inc. is the warrantor
in relation to this product.
The Philips trademark and the Philips Shield Emblem
are registered trademarks of Koninklijke Philips N.V.
used under license.
A51RJUH
䖩䖩䖩
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising