EX-PROOF HOUSING
EXH
EX-PROOF HOUSING
MAIN FEATURES
Certifications Ex d for use in Zone 1 and 2, Group IIC (Gas), and in Zone Ex tb 21
and 22 (Dust)
Solid anticorodal aluminium construction
IP66
2 holes for cable glands 3/4" NPT
Version with device for the protection of the glass installed on the front of the
housing (EXHD)
Supplied with heater. Sunshield as option.
Environment temperature: -40°C/+50°C (-40°C/+122°F) with reinforced heater
Internal usable area (WxHxL): 100x100x280mm (3.9x3.9x11in)
DESCRIPTION
The EXH housings are made with strong Anticorodal aluminium die-cast alloy of
AISi Mg EN AB- 42000 group.
All external components are stove enameled using powder offering an excellent
resistance to UV rays, salt-spray, environment polluting substances.
EXHC
The cylindrical body of the EXHC housing (210mm diameter and 400mm length) is
closed on opposite sides by two 12 mm thick flanges. The housing is supplied with
two holes for the 3/4" NPT cable glands. The camera housing is equipped with
heater and optional sunshield.
EXHD
Ex-proof housing with the same specifications as the EXHC series but fitted with
a patented device for the protection of the glass which gives clear vision in dirty
environments.
The glass protection device consists of a connection flange with the housing, a
closing flange and an explosion-proof central body containing a rugged and
transparent glass, a motor powered in 24Vac, two windings and a transparent
Mylar film, installed just in front of the glass. The motor drives, through four
pinions with gear rim, the winding for recovering the dirty Mylar film, while at the
same time the other winding installed on the opposite side releases the clean film.
NOTE: the control unit of the glass protection device is not supplied with the product.
The transparent Mylar film, 80mm wide and 18m long, allows 350 steps. When
the film is dirty, the operator will activate the motor shifting the film to obtain a
clean camera picture (the step for allowing the complete shift of the dirty film is
about 50mm). The end of the Mylar film will be indicated to the operator through
marks printed on the last 50cm of the film.
WWW.VIDEOTEC.COM DATA SHEETS
HOUSING EXHC + SUNSHIELD EXHS000
HOUSING EXHD + SUNSHIELD EXHS001
AVAILABLE MODELS
Model
Number
Housing
Housing
heater 24Vac heater
230Vac
Reinforced
heater
Glass
protection
device
Environment
temperature
EXHC003R
p
–
p
–
-40°C / +50°C
(-40°F/+122°F)
EXHC203R
–
p
p
–
-40°C / +50°C
(-40°F/+122°F)
EXHD005R
p
–
p
p
-40°C / +50°C
(-40°F/+122°F)
EXH_EN_2017_05_12
Specifications subject to change without notice. © Videotec S.p.A. All rights reserved.
TECHNICAL DATA
GENERAL
Non-corrosive die-cast aluminium (anticorodal)
Epoxy powder painted with orange peel effect, RAL7032
MECHANICAL
2 holes for cable glands 3/4" NPT
External dimensions:
•EXHC Ø 210mmx427.5mm (8.2x16.8in)
•EXHD Ø 250x573.5mm (9.8x22.6in)
Internal dimensions:
•EXHC Ø 180x380mm (7x14.9in)
•EXHD Ø 180x460mm (7x18.1in)
Internal usable area:
•EXHC 100x100x280mm (3.9x3.9x11in)
•EXHD 100x100x280mm (3.9x3.9x11in)
Glass window extra clear:
•EXHC Ø 114mm (4.5in)
•EXHD 70x56mm (2.7x2.2in)
Unit weight:
•EXHC 15kg / 33lb
•EXHD 24kg / 52.9lb
Glass protection device:
•Glass protection device: Ø 250x140mm (9.8x5.5in)
•Mylar film 80mm (3.1in) wide and 18m (59ft) length, 350 shifting steps, marks
printed on the last 50cm (19in)
CERTIFICATIONS
ATEX (EN 60079-0: 2009, EN 60079-1: 2007, EN 60079-31: 2009):
bEx II 2G Ex d IIC T6 Gb
bEx II 2D Ex t IIIC T85 °C Db IP66
c 0044: notify number from competent body
IECEx (IEC 60079-0: 2007, IEC 60079-1: 2007, IEC 60079-31: 2008):
Ex d IIC T6 Gb
Ex t IIIC T85 °C Db IP66
EAC EX:
Ex II 2G Ex d IIC T6 Gb,-40°C/+50°C
EX II 2D Ex t IIIC T85°C Db -40°C/+50°C, IP66
KCs 16-KA4BO-0057 -16-KA4BO-0058
Ex d IIC T6
Ex tb IIIC T85°C
ACCESSORIES
EXHS000
EXHS001
OCTEX3/4C
OCTEXA3/4C
OCTEXB3/4C
OCTEXBA3/4C
OCTEX3/4
ELECTRICAL
Reinforced heater: Ton 15°C±4°C (59°F±7°F), Toff 22°C±3°C (72°F±5°F)
•3 resistors in the housing, consumption 60W max
Glass protection device:
•24Vac, power consumption 2W max
Devices to install inside the housing
•Camera equipped with lens with max total power of 20W
•Voltage max. 24Vac or 230Vac
•Useful volume for camera / lens: 2800cm ³
•Minimum distance between the walls of the housing and the camera/lens: 12mm
OCTEXA3/4
ENVIRONMENT
For installation indoors and outdoors
Operating temperature with heating: -40°C / +50°C (-40°F/+122°F)
Always refer to the temperature in the marking.
OCTEXP3/4C
OCTEXB1/2C
OCTEX1/2C
OCTEXS1/2C
OCTEXA1/2C
OCTEX1/2-3/4C
OEXPLUG3/4
BRACKETS AND ADAPTORS
EXWBJ000
Bracket and ball joint RAL7032 for EXH series
EXBJ000
Only ball joint for EXH RAL7032 housings
SPARE PARTS
OEXMYLAR
OEXVETN
OEXDPVN
VIDEO SECURITY PRODUCTS
Sunshield 580mm (22.8in) for EXH series
Sunshield 650mm (25.6in) for EXHD
Cable gland in nickel-plated brass with gasket EX 3/4" NPT,
unarmoured cable IECEX-ATEX-EAC Ex
Cable gland in nickel-plated brass with gasket EX 3/4" NPT,
armoured cable IECEX-ATEX-EAC Ex
Barrier cable gland in nickel-plated brass 3/4" NPT, unarmoured
cable IECEX-ATEX-EAC Ex
Barrier cable gland in nickel-plated brass 3/4" NPT, armoured cable
IECEX-ATEX-EAC Ex
Cable gland in nickel-plated brass with gasket EX 3/4" NPT,
unarmoured cable ATEX
Cable gland in nickel-plated brass with gasket EX 3/4" NPT,
armoured cable ATEX
Barrier cable gland in nickel-plated brass EX 1/2" NPT, unarmoured
cable IECEX-ATEX-EAC Ex
Cable gland in nickel-plated brass EX 1/2" NPT, unarmoured cable
IECEX-ATEX-EAC Ex, with gasket from 3 to 8mm (0.12 to 0.31in)
Cable gland in nickel-plated brass EX 1/2" NPT, unarmoured cable
IECEX-ATEX-EAC Ex, with gasket from 7.5 to 11.9mm (3 to 4.7in)
Cable gland in nickel-plated brass EX 1/2" NPT armoured cable
IECEX-ATEX-EAC Ex, with gasket
Cable glands reduction in nickel-plated brass 3/4" - 1/2" NPT IECEXATEX-EAC Ex
Conduit cable gland nickel-plated brass 3/4" NPT IECEX-ATEX- c CSA
us - EAC Ex (operating temperature: from -60°C (-76°F) up to +80°C
(+176°F))
Plug EX 3/4" NPT IECEX-ATEX-EAC Ex
OSLIEX
OSLIEXD
Mylar film replacement kit, 18m (59ft), 350 steps
Complete front flange with glass for EXHC and EXPTC series
Complete front flange with glass protection device for EXHD and
EXPTD series, RAL7032
Internal slide complete with heater for EXHC and EXPTC series
Internal slide complete with heater for EXHD and EXPTD series
PACKAGE
Model Number
EXHC003R
EXHD005R
Weight
Dimensions (WxHxL)
Master carton
17.5kg (39lb) 61x32x31cm (24x12.6x12.2in)
26.5kg (58lb) 43x67x67cm (17x26.3x26.3in)
-
EXH_EN_2017_05_12
Specifications subject to change without notice. © Videotec S.p.A. All rights reserved.
1/2" NPT CABLE GLAND SELECTION GUIDE
Cable gland type
Certification
Operating temperature
Cable
Cable glands
product code
Diameter of the
external cable (mm)
Under armor cable
diameter (mm)
Barrier
IECEX/ATEX/EAC Ex
-60°C / +80°C
(-76°F / +176°F)
Not armoured
OCTEXB1/2C
3-8
–
With gasket
IECEX/ATEX/EAC Ex
-60°C / +100°C
(-76°F / +212°F)
Not armoured
OCTEX1/2C
3-8
–
Not armoured
OCTEXS1/2C
7.5 - 11.9
–
Armoured
OCTEXA1/2C
12.5 - 20.5
8.4 - 14.3
3/4" NPT CABLE GLAND SELECTION GUIDE
Cable gland type
Certification
Operating temperature
Cable
Cable glands
product code
Diameter of the
external cable (mm)
Under armor cable
diameter (mm)
Barrier
IECEX/ATEX/EAC Ex
-60°C / +80°C
(-76°F / +176°F)
Not armoured
OCTEXB3/4C
13 - 20.2
–
Armoured
OCTEXBA3/4C
16.9 - 26
–
With gasket
IECEX/ATEX/EAC Ex
-60°C / +100°C
(-76°F / +212°F)
Not armoured
OCTEX3/4C
13 - 20.2
–
Armoured
OCTEXA3/4C
16.9 - 26
11.1 - 19.7
-20°C / +80°C (-4°F
/ + 176°F)
Not armoured
OCTEX3/4
14 - 17
–
Armoured
OCTEXA3/4
18 - 23
14 - 17
ATEX
WWW.VIDEOTEC.COM DATA SHEETS
EXH_EN_2017_05_12
Specifications subject to change without notice. © Videotec S.p.A. All rights reserved.
TECHNICAL DRAWINGS
The dimensions of the drawings are in millimetres.
41
50
41
30
574
70
Ø 250
56
12
293
132
130
458
116
EXHD
41
50
41
30
428
12
12
220
Ø 210
115
Ø 114
147
130
312
132
116
EXHC
VIDEO SECURITY PRODUCTS
EXH_EN_2017_05_12
Specifications subject to change without notice. © Videotec S.p.A. All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising