Startup Guide
2
Supplied accessories
4-585-895-73(1)
Connecting with a TV
Sound Bar
Startup Guide
Remote control (1)
R03 (size AAA) batteries (2)
Is the HDMI input jack on your TV labeled “ARC” ?
Optical digital cable (1)
NO
YES
Wall mounting brackets (2)
Screws (2)
Grille frame support hook (2)
Operating Instructions (1)
Grille frame (1)
Startup guide (this document) (1)
About the operation method of the system
HDMI cable (not supplied)*
Connect this system and the TV with the HDMI cable (not supplied) to display the operation screen
of the system on the TV. Prepare the HDMI cable.
Optical digital cable
(supplied)
HDMI cable (not supplied)*
Operating Instructions
Refer to the Operating Instructions (separate
document) for the network settings, the NFC
function, and other functions.
* To enjoy images in 4K/60p, usage of the Premium High Speed HDMI cable(s) with Ethernet is recommended. For details, refer to “Playable Types of Files” in the Operating Instructions (separate document).
Note
•Make sure that the HDMI cable is firmly inserted.
3
HT-NT5
1
Connecting with other devices
Locating the installation position
Bar Speaker
To mount the Bar Speaker on a wall
Refer to “Mounting the Unit on a Wall” in the Operating Instructions (separate document).
Subwoofer
HDMI cable (not supplied)*
Blu-ray Disc™ player, cable
box or satellite box, etc.
* To enjoy images in 4K/60p, usage of the Premium High Speed HDMI cable(s) with Ethernet is recommended. For details, refer to “Playable Types of Files” in the Operating Instructions (separate document).
Note
•Do not place magnetic cards on the system or near the system.
•Do not place metal objects other than a TV around the system. Wireless functions may become unstable.
Disconnect the HDMI cable from the HDMI IN jack of the TV, then reconnect it to any of the HDMI IN jacks (HDMI IN 1/2/3) on the Bar Speaker.
To enjoy the high quality surround sound of Dolby TrueHD, DTS HD, etc., switch the connection of the Blu-ray Disc™ player, cable box, satellite box, etc. to the system.
Tip
To attach the grille frame
Refer to “Attaching the Grille Frame” in the Operating Instructions (separate document).
•The Standby Through function allows you to output HDMI signals to the TV even when the system is in standby mode.
Set the settings as follows; Press HOME [Setup] [System Settings] - [HDMI Settings] - [Standby Through], then select [Auto] or [On].
•To enjoy copy right-protected 4K content, refer to “Connection for Viewing Copyright-protected 4K Content” in the Operating Instructions (separate document).
Note
•Make sure that the HDMI cable is firmly inserted.
4
Setting up the remote control
Continued on back page
© 2016 Sony Corporation
Printed in Malaysia
5
8
Turning on the TV
Listening to the sound
INPUT +/–
Power
Home menu
///
HOME
SW  +/–
6
Turning on the system

/
Front Panel
Power indicator
(green)
 +/–
Listening to the audio of the TV
To enjoy an input device other than the TV
Select the desired program using the remote control of the TV.
Press HOME.
The screen switches to the television broadcast screen and the TV audio is output from
the system.
If the sound of the TV does not output from the system, press INPUT +/− of the supplied
remote control until “TV” appears in the front panel.
Adjust the volume.
The home menu appears on the TV screen.
Press /// to select the desired input on the home menu.
For details, refer to “About the Home Menu” in the Operating Instructions (separate
document).
Adjust the volume by pressing  +/− on the remote control of the system.
Adjust the volume of the subwoofer by pressing SW +/− on the remote control of the
system.
For details on the sound quality adjustment, refer to “Selecting the Sound Effect” in the
Operating Instructions (separate document).

Troubleshooting
No TV sound is output from the system, or no picture is displayed on the TV
Connect the AC power cords (mains leads) of the Bar Speaker and subwoofer.
Press  (power) of the remote control.
The front panel display lights up.
Confirm that the power indicator of the subwoofer is lit in green.
If not, refer to “Subwoofer” of “Troubleshooting” in the Operating Instructions (separate
document).
Turn on the connected device.
No picture or sound of the device connected to the system is output
•Press INPUT +/− on the remote control of the system repeatedly until the input connecting the desired device appears on the front panel display of the system.
•Make sure that the input and output of the HDMI jack of the system are correct.
•Disconnect the cables connected to the system, and then connect them again. Make sure that the cables are firmly inserted.
The TV remote control does not work
•When the Bar Speaker obstructs the remote control sensor of the TV, the TV remote control may not work. In that case, set [IR-Repeater] to [On]. You can control the TV with the remote control of the TV. For details on the sound quality
adjustment, refer to “Sending the Remote Signal to the TV via the Unit” in the Operating Instructions (separate document).
No sound or only a very low-level sound is heard from the subwoofer
Tip
•For details on the settings of the control for HDMI on the TV, refer to the Operating Instructions supplied
with the TV.
7
•Press INPUT +/− on the remote control of the system repeatedly until “TV” appears in the front panel display on the system.
•Make sure that the input and output of the HDMI jack of the system are correct.
•Disconnect the cables connecting the TV and the system, and then connect them again. Make sure that the cables are firmly inserted.
•Depending on the order you turn on the TV and the system, the system may enter muting mode and “Muting” may appear in the front panel display. In this case, turn on the TV first, then the system.
•Press SW  +/− on the remote control of the system to increase the volume of the subwoofer.
•Refer to “Troubleshooting” in the Operating Instructions (separate document).
Performing Easy Setup
Have more fun with additional Sony wireless speakers (not supplied). Please refer to the Operating Instructions (separate document) for SongPal Link
features.
////
HOME
Press HOME on the remote control of this system.
The Easy Setup screen is displayed on the TV screen.
If the Easy Setup screen does not appear, use the remote control of the TV to switch the TV
input setting to the HDMI input jack that connects the TV to the system.
Press /// to select an item as instructed on the TV screen, and then press
to perform Easy Setup.
Once [Easy Initial Settings are complete.] appears, select [Finish].
Tip
•On-screen instructions are displayed in the language you selected in this step.
•For details on the network connection, refer to “Enjoying with the Network Function” in the Operating
Instructions (separate document).
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising