- Lexus Drivers

- Lexus Drivers
1
QUICK GUIDE
11
2
BASIC FUNCTION
29
3
NAVIGATION SYSTEM
71
4
AUDIO/VISUAL SYSTEM
139
5
VOICE COMMAND SYSTEM
257
6
INFORMATION
275
7
PHONE
279
8
LEXUS ENFORM
319
9
12.3-INCH DISPLAY
347
INDEX
355
For more information about the following items, see the “Owner’s Manual”.
 Air conditioning
 Fuel consumption
 Vehicle customization settings
 Intuitive parking assist
 Multi-terrain monitor
1
LX_Navi_OM60N29U_(U)
15.07.30 20:43
Introduction
NAVIGATION SYSTEM OWNER’S MANUAL
This manual explains the operation of the system. Please read this manual carefully to
ensure proper use. Keep this manual in your vehicle at all times.
The screen shots in this document and the actual screens of the system differ depending on whether the functions and/or a contract existed and the map data available at
the time of producing this document.
In some situations when changing between screens, it may take longer than normal for
the screen to change, the screen may be blank momentarily or noise may be displayed.
Please be aware that the content of this manual may be different from the system in
some cases, such as when the system’s software is updated.
NAVIGATION SYSTEM
The Navigation System is one of the most technologically advanced vehicle accessories ever developed. The system receives satellite signals from the Global Positioning
System (GPS) operated by the U.S. Department of Defense. Using these signals and
other vehicle sensors, the system indicates your present position and assists in locating
a desired destination.
The navigation system is designed to select efficient routes from your present starting
location to your destination. The system is also designed to direct you to a destination
that is unfamiliar to you in an efficient manner. The system uses DENSO maps. The calculated routes may not be the shortest nor the least traffic congested. Your own personal local knowledge or “short cut” may at times be faster than the calculated routes.
The navigation system’s database includes Point of Interest categories to allow you to
easily select destinations such as restaurants and hotels. If a destination is not in the database, you can enter the street address or a major intersection close to it and the system will guide you there.
The system will provide both a visual map and audio instructions. The audio instructions
will announce the distance remaining and the direction to turn in when approaching an
intersection. These voice instructions will help you keep your eyes on the road and are
timed to provide enough time to allow you to maneuver, change lanes or slow down.
2
LX_Navi_OM60N29U_(U)
15.07.30 20:43
Please be aware that all current vehicle navigation systems have certain limitations that
may affect their ability to perform properly. The accuracy of the vehicle’s position depends on satellite conditions, road configuration, vehicle condition or other circumstances. For more information on the limitations of the system, refer to page 135.
3
LX_Navi_OM60N29U_(U)
15.07.30 20:43
IMPORTANT INFORMATION ABOUT THIS MANUAL
For safety reasons, this manual indicates items requiring particular attention with the
following marks.
WARNING
●This is a warning against anything which may cause injury to people if the warning is
ignored. You are informed about what you must or must not do in order to reduce the risk of
injury to yourself and others.
NOTICE
●This is a warning against anything which may cause damage to the vehicle or its equipment
if the warning is ignored. You are informed about what you must or must not do in order to
avoid or reduce the risk of damage to your vehicle and its equipment.
SYMBOLS USED IN ILLUSTRATIONS
Safety symbol
The symbol of a circle with a slash through it means “Do not”, “Do not do
this” or “Do not let this happen”.
Arrows indicating operations
Indicates the action (pressing, turning, etc.)
used to operate switches and other devices.
Indicates the outcome of an operation (e.g.
a lid opens).
4
LX_Navi_OM60N29U_(U)
15.07.30 20:43
HOW TO READ THIS MANUAL
No.
Name
Description
Operational
Outlines
An outline of the operation is explained.
Main Operations
The steps of an operation are explained.
Related Operations
A main operation’s supplementary operations are described.
Information
Useful information for the user is described.
5
LX_Navi_OM60N29U_(U)
15.07.30 20:43
SAFETY INSTRUCTION
To use this system in the safest possible
manner, follow all the safety tips shown below.
This system is intended to assist in reaching
the destination and, if used properly, can do
so. The driver is solely responsible for the
safe operation of your vehicle and the safety
of your passengers.
Do not use any feature of this system to the
extent it becomes a distraction and prevents safe driving. The first priority while
driving should always be the safe operation
of the vehicle. While driving, be sure to observe all traffic regulations.
Prior to the actual use of this system, learn
how to use it and become thoroughly familiar with it. Read the entire manual to make
sure you understand the system. Do not allow other people to use this system until
they have read and understood the instructions in this manual.
For your safety, some functions may become inoperable when driving. Unavailable
screen buttons are dimmed. Only when the
vehicle is not moving, can the destination
and route selection be done.
WARNING
●For safety, the driver should not operate
the navigation system while he/she is
driving. Insufficient attention to the road
and traffic may cause an accident.
●While driving, be sure to obey the traffic
regulations and maintain awareness of
the road conditions. If a traffic sign on the
road has been changed, route guidance
may not have the updated information
such as the direction of a one way street.
While driving, listen to the voice instructions
as much as possible and glance at the
screen briefly and only when it is safe. However, do not totally rely on voice guidance.
Use it just for reference. If the system cannot determine the current position correctly, there is a possibility of incorrect, late, or
non-voice guidance.
The data in the system may occasionally be
incomplete. Road conditions, including
driving restrictions (no left turns, street closures, etc.) frequently change. Therefore,
before following any instructions from the
system, look to see whether the instruction
can be done safely and legally.
6
LX_Navi_OM60N29U_(U)
15.07.30 20:43
This system cannot warn about such things
as the safety of an area, condition of streets,
and availability of emergency services. If unsure about the safety of an area, do not drive
into it. Under no circumstances is this system a substitute for the driver’s personal
judgement.
Use this system only in locations where it is
legal to do so. Some states/provinces may
have laws prohibiting the use of video and
navigation screens next to the driver.
7
LX_Navi_OM60N29U_(U)
15.07.30 20:43
TABLE OF CONTENTS
1
QUICK GUIDE
3
NAVIGATION SYSTEM
1. BASIC FUNCTION......................................... 12
1. BASIC OPERATION..................................... 72
Remote Touch........................................................... 12
“Menu” SCREEN .................................................... 14
QUICK REFERENCE..........................................72
MAP SCREEN OPERATION ........................ 75
MAP SCREEN INFORMATION..................80
TRAFFIC INFORMATION .............................. 86
2. QUICK REFERENCE................................... 18
“Setup” SCREEN..................................................... 18
“Information” SCREEN........................................20
3. NAVIGATION OPERATION .................. 22
REGISTERING HOME...................................... 22
REGISTERING PRESET
DESTINATIONS ................................................23
OPERATION FLOW: GUIDING THE
ROUTE.................................................................... 24
SETTING HOME AS THE
DESTINATION...................................................25
4. FUNCTION INDEX...................................... 26
FUNCTION INDEX ............................................26
2. DESTINATION SEARCH........................... 89
DESTINATION SEARCH
OPERATION ......................................................89
STARTING ROUTE GUIDANCE ...............101
3. ROUTE GUIDANCE................................. 106
ROUTE GUIDANCE SCREEN .................. 106
TYPICAL VOICE GUIDANCE
PROMPTS............................................................. 113
EDITING ROUTE ................................................. 114
4. MEMORY POINTS..................................... 118
MEMORY POINTS SETTINGS ....................118
5. SETUP.............................................................. 128
2
BASIC FUNCTION
1. BASIC INFORMATION BEFORE
OPERATION ...............................................30
INITIAL SCREEN ..................................................30
HOW TO USE THE Remote Touch .............32
ENTERING LETTERS AND NUMBERS/
LIST SCREEN OPERATION.......................34
SCREEN ADJUSTMENT .................................. 37
LINKING MULTI-INFORMATION
DISPLAY AND NAVIGATION
SYSTEM .................................................................39
DETAILED NAVIGATION
SETTINGS........................................................... 128
TRAFFIC SETTINGS ..........................................133
6. TIPS FOR THE NAVIGATION
SYSTEM ....................................................... 135
GPS (GLOBAL POSITIONING
SYSTEM) ............................................................. 135
MAP DATABASE VERSION AND
COVERED AREA .......................................... 138
2. Bluetooth® SETTINGS................................. 40
REGISTERING/CONNECTING
Bluetooth® DEVICE.........................................40
SETTING Bluetooth® DETAILS .....................46
3. OTHER SETTINGS ....................................... 57
GENERAL SETTINGS ....................................... 57
VOICE SETTINGS ...............................................63
VEHICLE SETTINGS ..........................................65
8
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4
AUDIO/VISUAL SYSTEM
8. REAR SEAT ENTERTAINMENT
SYSTEM OPERATION..........................229
AM/FM/SAT RADIO....................................... 229
CD .............................................................................. 231 2
DVD ..........................................................................234
USB MEMORY.....................................................241
iPod............................................................................ 244 3
Bluetooth® AUDIO........................................... 247
EXTERNAL DEVICES ....................................250
4
1. BASIC OPERATION ...................................142
QUICK REFERENCE ....................................... 142
SOME BASICS..................................................... 144
2. RADIO OPERATION ................................153
AM/FM RADIO ...................................................153
XM Satellite Radio ...............................................163
INTERNET RADIO.............................................170
3. MEDIA OPERATION ................................. 171
CD.................................................................................171
DVD............................................................................ 174
USB MEMORY .................................................... 179
iPod.............................................................................183
Bluetooth® AUDIO ........................................... 188
AUX ...........................................................................194
4. AUDIO/VISUAL REMOTE
CONTROLS ...............................................198
STEERING SWITCHES....................................198
5. SETUP ..............................................................201
AUDIO SETTINGS.............................................201
9. SETUP FOR REAR SEAT
ENTERTAINMENT SYSTEM................251
REAR SEAT ENTERTAINMENT
5
SYSTEM SETTINGS ...................................... 251
10. TIPS FOR OPERATING REAR
SEAT ENTERTAINMENT
6
SYSTEM.......................................................254
OPERATING INFORMATION .................254
5
8
VOICE COMMAND SYSTEM..................258 9
CASUAL SPEECH
RECOGNIZATION .....................................266
COMMAND LIST ............................................. 267
OPERATING INFORMATION..................207
REAR SEAT ENTERTAINMENT
SYSTEM FEATURES...................................... 221
SOME BASICS....................................................224
7
VOICE COMMAND SYSTEM
1. VOICE COMMAND SYSTEM
OPERATION.............................................258
6. TIPS FOR OPERATING THE
AUDIO/VISUAL SYSTEM...................207
7. REAR SEAT ENTERTAINMENT
SYSTEM FEATURES ...............................221
1
2. MOBILE ASSISTANT
OPERATION.............................................272
MOBILE ASSISTANT ...................................... 272
6
INFORMATION
1. INFORMATION DISPLAY ...................... 276
RECEIVING DOPPLER WEATHER
INFORMATION............................................. 276
DATA SERVICES SETTINGS......................278
9
LX_Navi_OM60N29U_(U)
15.07.30 20:43
TABLE OF CONTENTS
7
PHONE
1. PHONE OPERATION
(HANDS-FREE SYSTEM FOR
CELLULAR PHONES) ..........................280
QUICK REFERENCE ..................................... 280
SOME BASICS..................................................... 281
CALLING ON THE Bluetooth®
PHONE .............................................................. 285
RECEIVING ON THE Bluetooth®
PHONE ................................................................ 291
TALKING ON THE Bluetooth®
PHONE ...............................................................292
Bluetooth® PHONE MESSAGE
FUNCTION.......................................................295
9
12.3-INCH DISPLAY
1. 12.3-INCH DISPLAY OPERATION ....348
12.3-INCH DISPLAY-OVERVIEW..........348
USING SIDE DISPLAY...................................350
INDEX
ALPHABETICAL INDEX.............................. 356
2. SETUP.............................................................300
PHONE SETTINGS ......................................... 300
3. WHAT TO DO IF... ...................................... 312
TROUBLESHOOTING................................... 312
8
LEXUS ENFORM
1. LEXUS ENFORM-OVERVIEW.............320
FUNCTIONAL OVERVIEW .......................320
TYPE A: FUNCTION ACHIEVED BY
USING A CELLULAR PHONE..............322
TYPE B: FUNCTION ACHIEVED BY
USING DCM AND THE
NAVIGATION SYSTEM............................326
TYPE C: FUNCTION ACHIEVED BY
USING DCM....................................................329
2. LEXUS ENFORM OPERATION..........330
LEXUS Enform Remote .................................. 330
LEXUS Enform Service Connect ................. 331
LEXUS App Suite ...............................................332
LEXUS Enform Destinations......................... 338
Lexus Insider..........................................................342
3. SETUP............................................................. 345
LEXUS App Suite SETTINGS.......................345
10
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1
1
QUICK GUIDE
2
1
BASIC FUNCTION
3
1. Remote Touch ............................................... 12
2. “Menu” SCREEN......................................... 14
4
STATUS DISPLAY...................................................... 16
5
2 QUICK REFERENCE
1. “Setup” SCREEN ......................................... 18
2. “Information” SCREEN............................. 20
3 NAVIGATION OPERATION
6
7
8
1. REGISTERING HOME............................ 22
2. REGISTERING PRESET
9
DESTINATIONS...................................... 23
3. OPERATION FLOW: GUIDING
THE ROUTE.............................................. 24
4. SETTING HOME AS THE
DESTINATION ........................................ 25
4 FUNCTION INDEX
1. FUNCTION INDEX .................................. 26
11
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. BASIC FUNCTION
1. Remote Touch
12
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. BASIC FUNCTION
No.
Name
Page
“MAP” button
Press to display the current position, cancel the
screen scroll, start guidance, and repeat a voice
guidance.
72, 75
“ · ” button
Press to scroll the list screen and to change the
scale of the map.
32, 35, 76
Back button
Press to display the previous screen.
32
“MENU” button
Press to display the “Menu” screen.
14
Remote Touch
knob
Move in the desired direction to select a function,
letter and screen button.
Press to enter the selected function, letter or
screen button.
32
“ENTER” button
Press to enter the selected function, letter or
screen button.
32
1
QUICK GUIDE
Function
13
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. BASIC FUNCTION
2. “Menu” SCREEN
To display this screen, press the “MENU” button on the Remote Touch.
14
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. BASIC FUNCTION
No.
Function
Page
Select to display the “Destination” screen.
1
89
QUICK GUIDE
Select to display the radio control screen.
142
Select to display the media control screen.
*
Select to display the hands-free operation screen.
280
Select to display the “LEXUS App Suite” screen.
332
Select to display the “Information” screen.
20
Select to display the air conditioning control screen.
“Owner’s
Manual”
Select to display the “Setup” screen.
18
Select to adjust the contrast and brightness of the screens, turn the
screen off, etc.
37
*: This function is not made available on some models.
INFORMATION
●When the split-screen display is selected, the “Menu” screen will be displayed on the main
display. (P.348)
15
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. BASIC FUNCTION
STATUS DISPLAY
The condition of the Bluetooth® connection, as well as the level of reception and the
amount of cellular phone battery charge left, are displayed on the status bar. This status
bar is shown on all modes.
No.
Indicators
Conditions
(Gray)
The condition of
the Bluetooth®
connection
(Blue)
No connection
Poor
Good
®
 An antenna for the Bluetooth connection is built into the instrument panel. The condition of the Bluetooth® connection may
deteriorate and the system may not function when a Bluetooth®
phone is used in the following conditions and/or places:
The cellular phone is obstructed by certain objects (such as when
it is behind the seat or in the glove box or console box).
The cellular phone is touching or is covered with metal materials.
 Leave the Bluetooth® phone in a place where the condition of the
Bluetooth® connection is good.
16
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. BASIC FUNCTION
No.
Indicators
The amount of
battery charge
left
1
Poor
Excellent
 The level of reception does not always correspond with the level
displayed on the cellular phone. The level of reception may not be
displayed depending on the phone you have.
When the cellular phone is out of the service area or in a place
inaccessible by radio waves, “No Service” is displayed.
 “Rm” is displayed when receiving in a roaming area. While roaming, display “Rm” top-left on the icon.
 The receiving area may not be displayed depending on the type of
phone you have.
Empty
Full
 The amount displayed does not always correspond with the
amount displayed on the Bluetooth® device.
The amount of battery charge left may not be displayed depending
on the type of the Bluetooth® device connected.
This system does not have a charging function.
17
LX_Navi_OM60N29U_(U)
15.07.30 20:43
QUICK GUIDE
The level of reception
Conditions
2. QUICK REFERENCE
1. “Setup” SCREEN
To display this screen, press the “MENU” button on the Remote Touch, then select
“Setup”.
18
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. QUICK REFERENCE
No.
Page
Select to change the selected language, operation sound, automatic
screen change settings, etc.
57
Select to set the voice guidance settings.
63
Select to set Bluetooth® phones and Bluetooth® audio devices.
46
Select to set radio and external media settings.
201
Select to set traffic information.
133
Select to set memory points (home, preset destinations, address book
entries, areas to avoid), navigation details or to delete previous destinations.
1
QUICK GUIDE
*
Function
118, 128
Select to set vehicle information such as maintenance information.
65
Select to set the phone sound, contacts, message settings, etc.
300
*
Select to set LEXUS App Suite settings.
345
*
Select to set data services settings.
278
*: This function is not made available on some models.
19
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. QUICK REFERENCE
2. “Information” SCREEN
To display this screen, press the “MENU” button on the Remote Touch, then select
“Info”.
20
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. QUICK REFERENCE
No.
Function
Page
1
*
Select to display traffic information.
86
*
Select to display weather information.
276
*
Select to display the “LEXUS Insider” screen.
342
*
Select to display the vehicle alert history.
QUICK GUIDE
“Owner’s
Manual”
Select to display the fuel consumption screen.

*: This function is not made available on some models.
21
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. NAVIGATION OPERATION
1. REGISTERING HOME
1
Press the “MAP” button on the
Remote Touch.
6
Select “Enter”.
Select “OK”.
Registration of home is complete.
Registering home in a different way
P.119
Editing the name, location, phone number and icon
P.119
Setting home as the destination
P.91
7
2
Select “Dest.”.
3
Select “Go Home”.
4
Select “Yes”.
5
There are different kinds of methods to search for your home.
(P.89)
22
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. NAVIGATION OPERATION
2. REGISTERING PRESET DESTINATIONS
1
Press the “MAP” button on the
Remote Touch.
6
Select “Enter”.
1
2
Select “Dest.”.
3
Select one of the preset destination
buttons.
4
Select “Yes”.
5
There are different kinds of methods to search for a destination.
(P.89)
23
LX_Navi_OM60N29U_(U)
15.07.30 20:43
QUICK GUIDE
Select “OK”.
Registration of preset destinations is complete.
Registering preset destinations in a different way
P.120
Editing the name, location, phone number and icon
P.121
Setting preset destinations as the destination
P.91
7
3. NAVIGATION OPERATION
3. OPERATION FLOW: GUIDING THE ROUTE
1
Press the “MAP” button on the
Remote Touch.
4
Select “Go”.
Select “OK”.
Selecting routes other than the one recommended (P.101)
Guidance to the destination is displayed
on the screen and can be heard via voice
guidance.
5
2
Select “Dest.”.
3
There are different kinds of methods to search for a destination.
(P.89)
24
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. NAVIGATION OPERATION
4. SETTING HOME AS THE DESTINATION
Press the “MAP” button on the
Remote Touch.
2
Select “Dest.”.
3
Select “Go Home”.
Select “OK”.
1
Selecting routes other than the one recommended (P.101)
Guidance to the destination is displayed
on the screen and can be heard via voice
guidance.
4
QUICK GUIDE
1
25
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4. FUNCTION INDEX
1. FUNCTION INDEX
Map
Displaying maps
Page
Viewing the map screen
72
Displaying the current position
75
Viewing the current position vicinity map
78
Changing the scale
76
Changing the map orientation
77
Displaying map Information
80
Displaying the estimated travel/arrival time to the destination
107
Selecting the map mode
78
Displaying traffic information
86
Searching for destinations
Page
Searching for the destination
89
Changing the search area
91
Route guidance
Before starting or during route guidance
Page
Starting route guidance
101
Editing the route
114
Viewing the entire route map
108
Adjusting route guidance volume
63
Deleting the destination
115
Address book
Page
Registering address book entries
122
Marking icons on the map
123
26
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4. FUNCTION INDEX
Useful functions
1
Information
Page
QUICK GUIDE
Displaying vehicle maintenance
66
Hands-free system (for cellular phone)
Page
Registering/connecting a Bluetooth® phone
40
Making a call on a Bluetooth® phone
285
Receiving a call on the Bluetooth® phone
291
Voice command system
Page
Operating the system with your voice
258
27
LX_Navi_OM60N29U_(U)
15.07.30 20:43
28
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2
1
BASIC FUNCTION
2
1
BASIC INFORMATION BEFORE
OPERATION
2 Bluetooth® SETTINGS
3
1. INITIAL SCREEN ....................................... 30
1. REGISTERING/CONNECTING
Bluetooth® DEVICE............................... 40 4
2. HOW TO USE THE Remote Touch...... 32
REGISTERING A Bluetooth® PHONE
FOR THE FIRST TIME ......................................... 40
3. ENTERING LETTERS AND
NUMBERS/LIST SCREEN
OPERATION............................................ 34
REGISTERING A Bluetooth® AUDIO
PLAYER FOR THE FIRST TIME ...................... 42
PROFILES ...................................................................... 44
ENTERING LETTERS AND NUMBERS........ 34
2. SETTING Bluetooth® DETAILS ............ 46
LIST SCREEN.............................................................. 35
“Bluetooth* Setup” SCREEN................................. 46
4. SCREEN ADJUSTMENT ........................ 37
REGISTERING A Bluetooth® DEVICE .......... 47
5. LINKING MULTI-INFORMATION
DISPLAY AND NAVIGATION
SYSTEM...................................................... 39
5
6
7
®
DELETING A Bluetooth DEVICE................... 49
CONNECTING A Bluetooth® DEVICE ....... 49
EDITING THE Bluetooth® DEVICE
INFORMATION...................................................... 51
“System Settings” SCREEN................................... 53
3 OTHER SETTINGS
1. GENERAL SETTINGS.............................. 57
GENERAL SETTINGS SCREEN ....................... 57
2. VOICE SETTINGS..................................... 63
VOICE SETTINGS SCREEN.............................. 63
3. VEHICLE SETTINGS ................................ 65
MAINTENANCE....................................................... 66
*: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
29
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8
9
1. BASIC INFORMATION BEFORE OPERATION
1. INITIAL SCREEN
1 When the engine switch is turned to
ACCESSORY or IGNITION ON
mode, the initial screen will be displayed
and the system will begin operating.
 Images shown on the initial screen can be
changed to suit individual preferences.
(P.60)
 After a few seconds displays the initial
screen, the “CAUTION” screen will be displayed.
 Waiting about 5 seconds or selecting
“Continue” switches to the last displayed
screen. (Press any button on the Remote
Touch, the function’s corresponding screen
will be displayed.)
WARNING
●When the vehicle is stopped with the
engine running, always apply the parking
brake for safety.
MAINTENANCE
INFORMATION
This system reminds users when to replace certain parts or components and
shows dealer information (if registered)
on the screen.
When the vehicle reaches a previously
set driving distance or date specified for
a scheduled maintenance check, the
“Maintenance Reminder” screen will be
displayed when the system is turned on.
 This screen goes off if the screen is not
operated for several seconds.
 To prevent this screen from being displayed again, select “Do Not Display
This Message Again”.
 To register maintenance information:
P.66
 If
is selected, the registered phone
number can be called.
30
LX_Navi_OM60N29U_(U)
15.07.31 14:46
1. BASIC INFORMATION BEFORE OPERATION
RESTARTING THE SYSTEM
When system response is extremely
slow, the system can be restarted.
2
BASIC FUNCTION
1 Press and hold the “PWR•VOL” knob
for 3 seconds or more.
31
LX_Navi_OM60N29U_(U)
15.07.31 14:46
1. BASIC INFORMATION BEFORE OPERATION
2. HOW TO USE THE Remote Touch
This system can be operated by the
Remote Touch when the engine switch
is in ACCESSORY or IGNITION ON
mode.
1 Use the Remote Touch knob to select
the desired button on the screen.
 When the pointer moves close to a button,
it will be automatically pulled onto that button. The strength of this pull can be
adjusted. (P.57)
 The pointer will disappear from the screen
if it is not moved for 6 seconds. Operation
of the Remote Touch knob will cause the
pointer to reappear.
 Press the “ ” button on the Remote Touch
to zoom in on the map screen and the “ ”
button to zoom out. These buttons can also
be used to scroll up and down on list
screens.
 When
2 To select a screen button, press the
Remote Touch knob or an “ENTER”
button. Once a button has been selected, the screen will change.
is displayed on the screen,
select
or press the
button on
the Remote Touch to return to the previous
screen.
 Press the “MENU” button on the Remote
Touch to display the “Menu” screen.
(P.14)
 The map screen can be displayed by pressing the “MAP” button on the Remote
Touch. (P.75)
32
LX_Navi_OM60N29U_(U)
15.07.31 14:46
1. BASIC INFORMATION BEFORE OPERATION
WARNING
NOTICE
●Under extremely cold conditions, the
Remote Touch knob may react slowly.
●Remove dirt from the display and its surrounding area by lightly wiping with a soft,
dry cloth, such as a cloth used for cleaning glasses with plastic lenses. Scrubbing
too hard or using a hard cloth could
scratch the display. Also, the display is
treated with a coating, and could be damaged by coming into contact with benzine or alkaline solution.
●Do not allow the Remote Touch to come
into contact with food, liquid, stickers or lit
cigarettes as doing so may cause it to
change color, emit a strange odor or stop
functioning.
●Do not subject the Remote Touch to
excessive pressure or strong impact as
the knob may bend or break off.
●Do not allow coins, contact lenses or
other such items to become caught in the
Remote Touch as this may cause it to stop
functioning.
●Items of clothing may rip if they become
caught on the Remote Touch knob.
●If your hand or any object is on the
Remote Touch knob when the engine
switch is in ACCESSORY mode, the
Remote Touch knob may not operate
properly.
33
LX_Navi_OM60N29U_(U)
15.07.31 14:46
2
BASIC FUNCTION
●Do not allow fingers, fingernails or hair to
become caught in the Remote Touch as
this may cause an injury.
●Be careful when touching the Remote
Touch in extreme temperatures as it may
become very hot or cold due to the temperature inside the vehicle.
INFORMATION
1. BASIC INFORMATION BEFORE OPERATION
3. ENTERING LETTERS AND NUMBERS/LIST SCREEN OPERATION
When searching by an address, name,
etc., or entering data, letters and numbers can be entered via the screen.
ENTERING LETTERS AND
NUMBERS
No.
 On certain letter entry screens, letters can
be entered in upper or lower case.
: Select to enter in lower case.
: Select to enter in upper case.
 Keyboard layout can be changed.
(P.57)
Function
Select to enter desired characters.
Text field. Entered character(s) will
be displayed.
During character entry, when there is
only one available option for the next
character(s), the next character(s)
will be displayed in gray text in the
text field automatically. Gray text is
entered by selecting this button.
Select to erase one character. Select
and hold to continue erasing characters.
Select to display the alphabet keys.
Select to display other symbols.
34
LX_Navi_OM60N29U_(U)
15.07.31 14:46
1. BASIC INFORMATION BEFORE OPERATION
LIST SCREEN
INFORMATION
LIST SCREEN OPERATION
■ SELECTING ALL ITEMS
Icon
Function
Select to skip to the next or previous page.
Select and hold
or
to
scroll through the displayed list.
This indicates the
screen’s position.
Some lists contain “Select All”. If
“Select All” is selected, it is possible to
select all items.
1 Select “Select All”.
displayed
If
appears to the right of an
item name, the complete name is
too long to display.
Select
to scroll to the end of
the name.
“Unselect All”: Unselect all items in the list.
Select
to move to the beginning of the name.
35
LX_Navi_OM60N29U_(U)
15.07.31 14:46
2
BASIC FUNCTION
The list screen may be displayed after
entering characters. When a list is displayed, use the appropriate screen button to scroll through the list.
●Matching items from the database are
listed even if the entered address or name
is incomplete.
●The list will be displayed automatically if
the maximum number of characters is
entered or matching items can be displayed on a single list screen.
●The number of matching items is shown
on the right side of the screen. If the number of matching items is more than 999,
the system displays “” on the screen.
●The “ ” and “ ” buttons on the Remote
Touch can be used to scroll up and down
on list screens.
1. BASIC INFORMATION BEFORE OPERATION
SORTING
The order of a list displayed on the
screen can be sorted in the order of distance from the current location, date,
category, etc.
1 Select “Sort”.
CHARACTER JUMP BUTTONS
IN LISTS
Some lists contain character screen buttons, “ABC”, “DEF” etc., which allow a
direct jump to list entries that begin with
the same letter as the character screen
button.
1 Select the desired character jump buttons.
2 Select the desired sorting criteria.
INFORMATION
●Every time the same character screen
button is selected, the list starting with the
subsequent character is displayed.
36
LX_Navi_OM60N29U_(U)
15.07.31 14:46
1. BASIC INFORMATION BEFORE OPERATION
4. SCREEN ADJUSTMENT
3 Select the items to be set.
2
1 Press the “MENU” button on the
Remote Touch.
No.
Function
Page
Select to turn the screen off.
To turn it on, press any button on the audio panel or on
the Remote Touch.

Select to turn day mode
on/off.
38
Select to adjust the screen
display.
2 Select “Display”.
Select to adjust the camera
display.
38
37
LX_Navi_OM60N29U_(U)
15.07.31 14:46
BASIC FUNCTION
The contrast and brightness of the
screen display and the image of the
camera display can be adjusted. The
screen can also be turned off, and/or
changed to either day or night mode.
(For information regarding audio/visual
screen adjustment: P.151)
1. BASIC INFORMATION BEFORE OPERATION
CHANGING BETWEEN DAY
AND NIGHT MODE
Depending on the position of the headlight switch, the screen changes to day
or night mode. This feature is available
when the headlight is switched on.
1 Select “Day Mode”.
INFORMATION
●If the screen is set to day mode with the
headlight switch turned on, this condition
is memorized even with the engine
turned off.
ADJUSTING THE CONTRAST/
BRIGHTNESS
The contrast and brightness of the
screen can be adjusted according to the
brightness of your surroundings.
1 Select “General” or “Camera”.
2 Select the desired item.
 “Display (General)” screen only: Select “ ”
or “ ” to select the desired display.
Screen button
Function
“Contrast” “+”
Select to strengthen the
contrast of the screen.
“Contrast” “-”
Select to weaken the
contrast of the screen.
“Brightness” “+”
Select to brighten the
screen.
“Brightness” “-”
Select to darken the
screen.
38
LX_Navi_OM60N29U_(U)
15.07.31 14:46
1. BASIC INFORMATION BEFORE OPERATION
5. LINKING MULTI-INFORMATION DISPLAY AND NAVIGATION SYSTEM
39
LX_Navi_OM60N29U_(U)
15.07.31 14:46
2
BASIC FUNCTION
The following functions of the navigation system are linked with the multi-information
display in the instrument cluster:
• Navigation
• Audio
etc.
These functions can be operated using multi-information display control switches on
the steering wheel. For details, refer to “Owner’s Manual”.
2. Bluetooth® SETTINGS
1. REGISTERING/CONNECTING Bluetooth® DEVICE
REGISTERING A Bluetooth®
PHONE FOR THE FIRST TIME
To use the hands-free system, it is necessary to register a Bluetooth® phone with
the system.
Once the phone has been registered, it
is possible to use the hands-free system.
This operation cannot be performed
while driving.
For details about registering a
Bluetooth® device: P.47
3 Select “Phone”.
 Operations up to this point can also be performed by pressing the
steering wheel.
switch on the
4 Select “Yes” to register a phone.
1 Turn the Bluetooth® connection setting
of your cellular phone on.
 This function is not available when
Bluetooth® connection setting of your cellular phone is set to off.
2 Press the “MENU” button on the
Remote Touch.
5 When this screen is displayed, search
for the device name displayed on this
screen on the screen of your
Bluetooth® device.
 For details about operating the Bluetooth®
device, see the manual that comes with it.
 To cancel the registration, select “Cancel”.
40
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. Bluetooth® SETTINGS
6 Register the Bluetooth® device using
your Bluetooth®
device.
7 Check that the following screen is dis-
played, indicating pairing was successful (a Bluetooth® link has been
established but registration is not yet
complete).
and registration is complete.
2
 If displayed, select “OK” to complete the
registration process.
 If an error message is displayed, follow the
guidance on the screen to try again.
INFORMATION
●If a cellular phone does not operate properly after being connected, turn the cellular phone off and on and then connect it
again.
 The system waits for connection requests
coming from the registered device.
 At this stage, the Bluetooth® functions are
not yet available.
 To cancel the registration, select “Cancel”.
41
LX_Navi_OM60N29U_(U)
15.07.30 20:43
BASIC FUNCTION
 A PIN code is not required for SSP (Secure
Simple Pairing) compatible Bluetooth®
devices. Depending on the type of
Bluetooth® device being connected, a
message confirming registration may be
displayed on the Bluetooth® device’s
screen. Respond and operate the
Bluetooth® device according to the confirmation message.
8 Check that “Connected” is displayed
2. Bluetooth® SETTINGS
REGISTERING A Bluetooth®
AUDIO PLAYER FOR THE
FIRST TIME
To use the Bluetooth® Audio, it is necessary to register an audio player with
the system.
Once the player has been registered, it
is possible to use the Bluetooth® Audio.
This operation cannot be performed
while driving.
For details about registering a
Bluetooth® device: P.47
3 Select “Radio” or “Media”.
4 Select “Source”.
1 Turn the Bluetooth® connection setting
of your audio player on.
 This function is not available when the
Bluetooth® connection setting of your
audio player is set to off.
5 Select “Bluetooth*”.
2 Press the “MENU” button on the
Remote Touch.
*: The Bluetooth® word mark and logos are
registered trademarks owned by
Bluetooth SIG, Inc.
42
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. Bluetooth® SETTINGS
6 Select “Connect”.
2
BASIC FUNCTION
7 Select “Yes” to register a audio player.
8 Follow the steps in “REGISTERING A
Bluetooth® PHONE FOR THE FIRST
TIME” from “STEP 5”. (P.40)
43
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. Bluetooth® SETTINGS
PROFILES
This system supports the following services.
Bluetooth®
Device
Bluetooth®
Phone/
Bluetooth®
Audio
Player
Bluetooth®
Device
Spec.
Bluetooth® Specification
Profile
HFP (Hands-Free Profile)
OPP (Object Push Profile)
Bluetooth®
Phone
Bluetooth®
Audio
Player
PBAP (Phone Book Access
Profile)
Function
Requirements
Recommendations
Registering a
Bluetooth® device
Ver.2.0
Ver.3.0
+EDR
Function
Requirements
Recommendations
Ver. 1.0
Ver. 1.6
Ver.1.1
Ver.1.2
Ver. 1.0
Ver. 1.1
Hands-free
system
Transferring the
contacts
MAP (Message Access Profile)
Bluetooth®
phone message

Ver. 1.0
SPP (Serial Port Profile)
“LEXUS App
Suite” function

Ver. 1.2
Ver. 1.0
Ver. 1.3
Ver. 1.0
Ver. 1.5
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote
Control Profile)
Bluetooth® audio system
44
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. Bluetooth® SETTINGS
INFORMATION
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by PIONEER CORPORATION is under license.
Other trademarks and trade names are those of their respective owners.
45
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2
BASIC FUNCTION
●If your cellular phone does not support HFP, registering the Bluetooth® phone or using
OPP, PBAP, MAP or SPP profiles individually will not be possible.
●If the connected Bluetooth® device version is older than recommended or incompatible,
the Bluetooth® device function may not work properly.
●Refer to http://www.lexus.com/MobileLink to find approved Bluetooth® phones for this
system.
2. Bluetooth® SETTINGS
2. SETTING Bluetooth® DETAILS
1 Press the “MENU” button on the
Remote Touch.
4 Select the desired item to be set.
“Bluetooth* Setup” SCREEN
2 Select “Setup”.
3 Select “Bluetooth*”.
Function
Page
®
Registering a Bluetooth device
47
Deleting a Bluetooth® device
49
Connecting a Bluetooth® device
49
Editing the Bluetooth
formation
®
device in-
Bluetooth® system settings
51
53
*: The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG, Inc.
46
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. Bluetooth® SETTINGS
DISPLAYING THE “Bluetooth*
Setup” SCREEN IN A
DIFFERENT WAY
REGISTERING A Bluetooth®
DEVICE
Up to 5 Bluetooth® devices can be registered.
2 Select “Setup”.
3 Select “Phone”.
4 Select “Connect Phone”.
Bluetooth® compatible phones (HFP)
and audio players (AVP) can be registered simultaneously.
This operation cannot be performed
while driving.
Remote Touch.
1 Display the “Bluetooth* Setup” screen.
(P.46)
2 Select “Add”.
When another Bluetooth® device is connected
 To disconnect the Bluetooth® device,
select “Yes”.
When 5 Bluetooth® devices have already been registered
 A registered device needs to be replaced.
Select “Yes”, and select the device to be
replaced.
*: The Bluetooth® word mark and logos are
registered trademarks owned by
Bluetooth SIG, Inc.
47
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2
BASIC FUNCTION
1 Press the “MENU” button on the
2. Bluetooth® SETTINGS
3 When this screen is displayed, search
5 Check that the following screen is dis-
 For details about operating the Bluetooth®
device, see the manual that comes with it.
 To cancel the registration, select “Cancel”.
 The system waits for connection requests
coming from the registered device.
for the device name displayed on this
screen on the screen of your
Bluetooth® device.
4 Register the Bluetooth® device using
your Bluetooth® device.
 A PIN code is not required for SSP (Secure
Simple Pairing) compatible Bluetooth®
devices. Depending on the type of
Bluetooth® device being connected, a
message confirming registration may be
displayed on the Bluetooth® device’s
screen. Respond and operate the
Bluetooth® device according to the confirmation message.
played, indicating pairing was successful (a Bluetooth® link has been
established but registration is not yet
complete).
 At this stage, the Bluetooth® functions are
not yet available.
 To cancel the registration, select “Cancel”.
6 Check that “Connected” is displayed
and registration is complete.
 If displayed, select “OK” to complete the
registration process.
 If an error message is displayed, follow the
guidance on the screen to try again.
48
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. Bluetooth® SETTINGS
CONNECTING A Bluetooth®
DEVICE
This operation cannot be performed
while driving.
Up to 5 Bluetooth® devices (Phones
(HFP) and audio players (AVP)) can be
registered.
1 Display the “Bluetooth* Setup” screen.
(P.46)
2 Select “Remove”.
3 Select the desired device.
If more than 1 Bluetooth® device has
been registered, select which device to
connect to.
1 Display the “Bluetooth* Setup” screen.
(P.46)
2 Select the device to be connected.
4 Select “Yes” when the confirmation
screen appears.
5 Check that a confirmation screen is displayed when the operation is complete.
INFORMATION
●When deleting a Bluetooth® phone, the
contact data will be deleted at the same
time.
 Supported profile icons will be displayed.
: Phone
: Audio player
: Phone/“LEXUS App Suite” service
 The profile icon for a currently connected
device will be displayed in color.
 Selecting a profile icon which is not currently connected will switch the connection
to the function.
 If the desired Bluetooth® device is not on
the list, select “Add” to register the
device. (P.47)
*: The Bluetooth® word mark and logos are
registered trademarks owned by
Bluetooth SIG, Inc.
49
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2
BASIC FUNCTION
DELETING A Bluetooth®
DEVICE
2. Bluetooth® SETTINGS
3 Select the desired connection.
■ AUTO CONNECTION MODE
To turn auto connection mode on, set
“Bluetooth* Power” to on. (P.54)
Leave the Bluetooth® device in a location where the connection can be established.
4 Check that a confirmation screen is displayed when the connection is complete.
 If an error message is displayed, follow the
guidance on the screen to try again.
INFORMATION
●It may take time if the device connection
is carried out during Bluetooth® audio
playback.
●Depending on the type of Bluetooth®
device being connected, it may be necessary to perform additional steps on the
device.
●When disconnecting a Bluetooth®
device, it is recommended to disconnect
using the system.
 When the engine switch is in ACCESSORY or IGNITION ON mode, the system searches for a nearby registered
device.
 The system will connect with the registered
device that was last connected, if it is
nearby. When automatic connection priority is set to on and there is more than one
registered Bluetooth® phone available, the
system will automatically connect to the
Bluetooth® phone with the highest priority.
(P.54)
■ CONNECTING MANUALLY
When the auto connection has failed or
“Bluetooth* Power” is turned off, it is
necessary to connect Bluetooth® manually.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*”.
4 Follow the steps in “CONNECTING A
Bluetooth® DEVICE” from “STEP 2”.
(P.49)
*: The Bluetooth® word mark and logos are
registered trademarks owned by
Bluetooth SIG, Inc.
50
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. Bluetooth® SETTINGS
EDITING THE Bluetooth®
DEVICE INFORMATION
If a Bluetooth® phone is disconnected
due to poor reception from the
Bluetooth® network when the engine
switch is in ACCESSORY or IGNITION ON mode, the system automatically reconnects the Bluetooth® phone.
The Bluetooth® device’s information
can be displayed on the screen. The displayed information can be edited.
This operation cannot be performed
while driving.
1 Display the “Bluetooth* Setup” screen.
(P.46)
2 Select the desired device to be edited.
3 Select “Device Info”.
*: The Bluetooth® word mark and logos are
registered trademarks owned by
Bluetooth SIG, Inc.
51
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2
BASIC FUNCTION
■ RECONNECTING THE Bluetooth®
PHONE
2. Bluetooth® SETTINGS
4 Confirm and change the Bluetooth®
device information.
INFORMATION
●If 2 Bluetooth® devices have been registered with the same device name, the
devices can be distinguished referring to
the device’s address.
●Depending on the type of phone, some
information may not be displayed.
CHANGING A DEVICE NAME
1 Select “Device Name”.
2 Enter the name and select “OK”.
INFORMATION
No.
●Even if the device name is changed, the
name registered in your Bluetooth®
device does not change.
Information
The name of the Bluetooth® device.
Can be changed to a desired name.
(P.52)
Select to set the Bluetooth® audio
player connection method.
(P.53)
Device address is unique to the device and cannot be changed.
Phone number of the Bluetooth®
phone.
Compatibility profile
Bluetooth® device.
of
the
Select to reset all setup items.
52
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. Bluetooth® SETTINGS
SETTING AUDIO PLAYER
CONNECTION METHOD
1 Select “Connect Audio Player from”.
2 Select the desired connection method.
“System Settings” SCREEN
The Bluetooth® settings can be confirmed and changed.
(P.46)
2 Select “System Settings”.
3 Select the desired item to be set.
“Vehicle”: Select to connect the audio system to the audio player.
“Device”: Select to connect the audio player to the audio system.
 Depending on the audio player, the “Vehicle” or “Device” connection method may
be best. As such, refer to the manual that
comes with the audio player.
No.
Function
Page
Select to set Bluetooth®
connection on/off.
54
Select to change the automatic connection priority of
the registered Bluetooth®
devices.
54
Select to edit the system information.
55
Select to reset all setup
items.

*: The Bluetooth® word mark and logos are
registered trademarks owned by
Bluetooth SIG, Inc.
53
LX_Navi_OM60N29U_(U)
15.07.30 20:43
BASIC FUNCTION
1 Display the “Bluetooth* Setup” screen.
2
2. Bluetooth® SETTINGS
2 Select the desired item to be set.
CHANGING “Bluetooth*
Power”
1 Select “Bluetooth* Power”.
When “Bluetooth* Power” is on:
The Bluetooth® device is automatically
connected when the engine switch is in ACCESSORY or IGNITION ON mode.
When “Bluetooth* Power” is off:
The Bluetooth® device is disconnected,
and the system will not connect to it next
time.
INFORMATION
●While driving, the auto connection state
can be changed from off to on, but cannot be changed from on to off.
® word mark and logos are
*: The Bluetooth
registered trademarks
Bluetooth SIG, Inc.
owned
by
SETTING AUTOMATIC
CONNECTION PRIORITY
The automatic connection priority of the
registered Bluetooth® devices can be
changed.
No.
Function
Page
Select to set automatic
connection priority on/off.

Select to change the automatic connection priority of
the registered Bluetooth®
phones.
55
Select to change the automatic connection priority of
the registered Bluetooth®
audio players.
55
Select to reset all setup
items.

INFORMATION
●A newly registered Bluetooth® device
will automatically be given the highest
automatic connection priority.
1 Select “Preferred Device Settings”.
54
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. Bluetooth® SETTINGS
■ CHANGING PHONE AUTOMATIC CONNECTION PRIORITY
EDITING THE SYSTEM
INFORMATION
1 Select “Preferred Phones”.
2 Select the desired Bluetooth® device
1 Select “System Information”.
2 Select the desired item to be set.
BASIC FUNCTION
and select “Up” or “Down” to change
the preferred order.
2
■ CHANGING AUDIO PLAYER AUTOMATIC CONNECTION PRIORITY
1 Select “Preferred Audio Players”.
2 Select the desired Bluetooth® device
and select “Up” or “Down” to change
the preferred order.
55
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. Bluetooth® SETTINGS
No.
Information
Page
Displays system name. Can
be changed to a desired
name.
56
■ EDITING THE SYSTEM NAME
1 Select “System Name”.
2 Enter a name and select “OK”.
■ EDITING THE PIN CODE
PIN code used when the
Bluetooth® device was
registered.
Can
be
changed to a desired code.
56
Device address is unique to
the device and cannot be
changed.

Select to set the phone connection status display on/
off.

Select to set the connection
status display of the audio
player on/off.

Compatibility profile of the
system

Select to reset all setup
items.

1 Select “System PIN Code”.
2 Enter a PIN code and select “OK”.
56
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. OTHER SETTINGS
1. GENERAL SETTINGS
Settings are available for automatic
screen change, operation sounds, etc.
GENERAL SETTINGS SCREEN
1 Press the “MENU” button on the
2
Remote Touch.
BASIC FUNCTION
2 Select “Setup”.
3 Select “General”.
4 Select the items to be set.
57
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. OTHER SETTINGS
No.
Function
Select to change the time zone, set
the daylight saving time on/off and
set the automatic adjustment of the
clock on/off. (P.59)
Select to change the language.
Select to change the unit of measure
for distance/fuel consumption.
Select to change the screen button
color.
Select to change the keyboard layout.
Select to customize the startup/
screen off images. (P.60)
Select to set automatic screen
changes from the audio/air conditioning control screen to the previous screen to on/off. When set to on,
the screen will automatically return
to the previous screen from the audio/air conditioning control screen
after 20 seconds.
No.
Function
Select to adjust the pointer sound
volume.
Select to adjust the strength of the
pull from the buttons to the pointer.
Select to delete personal data.
(P.62)
Select to update software versions.
For details, contact your Lexus dealer.
Select to update “Gracenote” database versions. For details, contact
your Lexus dealer.
Select to display the software information. Notices related to third party
software used in this product are enlisted. (This includes instructions for
obtaining such software, where applicable.)
Select to set the selection sounds
on/off.
Select to set the pointer sounds on/
off.
Select to set the error sounds on/off.
58
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. OTHER SETTINGS
CLOCK SETTINGS
Used for changing the time zone and
setting of daylight saving time and automatic time adjustment on/off.
(P.57)
2 Select “Clock”.
3 Select the items to be set.
1 Select “Time Zone”.
2 Select the desired time zone.
 If “Other” is selected, the zone can be
adjusted manually. Select “+” or “-” to
adjust the time zone.
■ MANUAL CLOCK SETTING
When “Auto Adjust by GPS” is turned
“Off”, the clock can be manually adjusted.
1 Select the desired item.
No.
Function
Select to change the time zone.
(P.59)
Select to set daylight saving time on/
off.
Select to set automatic adjustment of
the clock by GPS on/off. When set to
on, the system will automatically adjust the clock to the current position’s
time zone when the vehicle moves to
a different time zone. When set to off,
the clock can be manually adjusted.
(P.59)
No.
Function
Select “+” to set the time forward
one hour and “-” to set the time back
one hour.
Select “+” to set the time forward
one minute and “-” to set the time
back one minute.
Select to round to the nearest hour.
e.g. 1:00 to 1:29  1:00
1:30 to 1:59  2:00
59
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2
BASIC FUNCTION
1 Display the “General Settings” screen.
■ SETTING THE TIME ZONE
3. OTHER SETTINGS
CUSTOMIZING THE STARTUP
AND SCREEN OFF IMAGES
An image can be copied from a USB
memory and used as the startup and
screen off Images.
The built-in movie can also be set as the
startup image.
When the engine switch is turned to
ACCESSORY or IGNITION ON
mode, the initial screen (startup image)
will be displayed. (P.30)
When “Screen Off” on the “Display”
screen is selected, the screen is turned
off and the desired screen off image that
is set is displayed. (To turn the screen off:
P.37)
■ TRANSFERRING IMAGES
1 Press the lid.
2 Open the cover and connect a device.
1 Display the “General Settings” screen.
(P.57)
2 Select “Customize Images”.
3 Select the items to be set.
 Turn on the power of the USB memory if it
is not turned on.
3 Select “Copy from USB”.
No.
Function
Page
Select to copy images from
a USB memory.
60
Select to delete images.
62
Select to set an image as the
startup or screen off image.
61
60
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. OTHER SETTINGS
4 Select the desired images from the list
■ SETTING THE STARTUP AND
SCREEN OFF IMAGES
 The selected image is displayed on the
right side of the screen. If the selected
1 Select “Set Images”.
2 Select the “Movies” or “Images” tab
and then select “Copy”.
and select the desired movie or image.
3 Select the desired items to be set.
5 Select “Yes” when the confirmation
screen appears.
INFORMATION
●When saving image files to a USB memory to be transferred to the system, save
the images in a folder named “Image” (Im-a-g-e, case sensitive). If a different
folder name is used, the system will not
recognize the image files.
●The compatible file extensions are JPG
and JPEG.
●An image’s file name, including file extension, can be up to 32 characters.
●Image files of 10 MB or less can be transferred.
●Up to 10 images can be transferred to the
system.
●Files with non-ASCII filenames can not
be transferred.
No.
Function
Select to set an image as the startup
image.
Select to set an image as the screen
off image.
Select to set an image as both the
startup and screen off image.
61
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2
BASIC FUNCTION
image file is broken or incompatible,
will be displayed.
 The remaining number of image files that
can be transferred is displayed at the bottom of the screen.
3. OTHER SETTINGS
■ DELETING TRANSFERRED IMAGES
1 Select “Delete Images”.
2 Select the images to be deleted and select “Delete”.
3 Select “Yes” when the confirmation
screen appears.
DELETING PERSONAL DATA
1 Display the “General Settings” screen.
(P.57)
2 Select “Delete Personal Data”.
3 Select “Delete”.
4 Select “Yes” when the confirmation
 Registered or changed personal settings
will be deleted or returned to their default
conditions.
For example:
• General settings
• Navigation settings
• Audio settings
• Phone settings
• Lexus Enform settings
NOTICE
●Make sure the map microSD card is
inserted when deleting personal data.
The personal data cannot be deleted
when the map microSD card is removed.
To delete the data, after inserting the map
microSD card, turn the engine switch to
ACCESSORY or IGNITION ON mode.
screen appears.
62
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. OTHER SETTINGS
2. VOICE SETTINGS
Voice guidance etc. can be set.
VOICE SETTINGS SCREEN
1 Press the “MENU” button on the
Remote Touch.
2
BASIC FUNCTION
2 Select “Setup”.
3 Select “Voice”.
4 Select the items to be set.
INFORMATION
●“Voice Settings” screen can also be displayed from the voice recognition top
screen. (P.261)
63
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. OTHER SETTINGS
No.
Function
Select to adjust the volume of voice
guidance.
Select to set the voice guidance during route guidance on/off.
Select to set the voice guidance during audio/visual and/or air conditioning system use on/off.
Select to set the voice recognition
prompts on/off.
Select to train voice recognition.
The voice command system adapt
the user accent.
Select to set the voice confirmation
display on/off.
Select to set the beep sound of navigation guidance.
Select to reset all setup items.
64
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. OTHER SETTINGS
3. VEHICLE SETTINGS
Settings are available for maintenance,
vehicle customization, intuitive parking
assist-sensor, etc.
4 Select the items to be set.
2
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Vehicle”.
*
BASIC FUNCTION
No.
Function
Page
Select to set maintenance.
66
Select to set vehicle
customization.
“Owner’s
Manual”
Select to set intuitive
parking assist-sensor.
“Owner’s
Manual”
Select to set blind spot
monitor.
“Owner’s
Manual”
Select to set driving
mode.
“Owner’s
Manual”
*: If equipped
65
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. OTHER SETTINGS
MAINTENANCE
When the system is turned on, the
“Maintenance Reminder” screen displays when it is time to replace a part or
certain components. (P.30)
1 Display the “Vehicle Settings” screen.
(P.65)
2 Select “Maintenance”.
3 Select the desired item.
No.
Function
Page
Select to set the condition
of parts or components.
67
Select to add new information items separately from
provided ones.

Select to cancel all conditions which have been entered.

Select to reset the items
which have expired conditions.

Select to call the registered
dealer.

Select to register/edit dealer information.
67
When set to on, the indicator will illuminate. The system is set to give
maintenance information
with the “Maintenance Reminder” screen.
30
INFORMATION
●When the vehicle needs to be serviced,
the screen button color will change to
orange.
66
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. OTHER SETTINGS
MAINTENANCE
INFORMATION SETTING
1 Select the desired part or component
screen button.
●For scheduled maintenance information,
refer to “Warranty and Services Guide/
Owner’s Manual Supplement/Scheduled
Maintenance”.
●Depending on driving or road conditions,
the actual date and distance that maintenance should be performed may differ
from the stored date and distance in the
system.
DEALER SETTING
No.
Function
Select to enter the next maintenance
date.
Select to enter the driving distance
until the next maintenance check.
Select to cancel the conditions which
have been entered.
Dealer information can be registered in
the system. With dealer information registered, route guidance to the dealer is
available.
1 Select “Set Dealer”.
2 Select the desired item to search for the
location. (P.89)
 The editing dealer screen appears after
setting the location.
Select to reset the conditions which
have expired.
3 Select “OK” after entering the conditions.
67
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2
BASIC FUNCTION
2 Set the conditions.
INFORMATION
3. OTHER SETTINGS
3 Select the items to be edited.
■ EDITING DEALER OR CONTACT
NAME
1 Select “Edit” next to “Dealer” or
“Contact”.
2 Enter the name and select “OK”.
■ EDITING THE LOCATION
No.
Function
Page
Select to enter the name of
a dealer.
68
Select to enter the name of
a dealer member.
68
Select to set the location.
68
Select to enter the phone
number.
68
Select to delete the dealer
information displayed on
the screen.

Select to set the displayed
dealer as a destination.
101
1 Select “Edit” next to “Location”.
2 Scroll the map to the desired point
(P.79) and select “OK”.
■ EDITING PHONE NUMBER
1 Select “Edit” next to “Phone #”.
2 Enter the phone number and select
“OK”.
68
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. OTHER SETTINGS
2
BASIC FUNCTION
69
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3
NAVIGATION SYSTEM
1
BASIC OPERATION
1. QUICK REFERENCE............................... 72
2 DESTINATION SEARCH
MAP SCREEN............................................................. 72
1. DESTINATION SEARCH
OPERATION ........................................... 89
NAVIGATION OPTIONS SCREEN .............. 74
SELECTING SEARCH AREA.............................. 91
2. MAP SCREEN OPERATION................ 75
SETTING HOME AS DESTINATION.............. 91
CURRENT POSITION DISPLAY...................... 75
SETTING PRESET DESTINATIONS AS
DESTINATION ........................................................ 91
MAP SCALE ................................................................ 76
SEARCHING BY ADDRESS............................... 92
ORIENTATION OF THE MAP........................... 77
SEARCHING BY POINT OF INTEREST ...... 93
SWITCHING THE MAP MODE........................ 78
SCREEN SCROLL OPERATION..................... 78
DESTINATION SEARCH BY
DESTINATION ASSIST ...................................... 97
ADJUSTING LOCATION IN SMALL
INCREMENTS......................................................... 79
SEARCHING FROM PREVIOUS
DESTINATIONS..................................................... 97
3. MAP SCREEN INFORMATION......... 80
DISPLAYING MAP INFORMATION ........... 80
DISPLAYING INFORMATION ABOUT
THE ICON WHERE THE
CURSOR IS SET.................................................... 84
STANDARD MAP ICONS .................................. 85
4. TRAFFIC INFORMATION .................... 86
DISPLAYING TRAFFIC
INFORMATION ON THE MAP................... 88
SEARCHING BY ADDRESS BOOK.............. 97
SEARCHING BY EMERGENCY.................... 98
SEARCHING BY INTERSECTION AND
FREEWAY ................................................................ 98
SEARCHING BY MAP........................................ 100
SEARCHING BY COORDINATES............. 100
2. STARTING ROUTE GUIDANCE ....... 101
CONFIRM DESTINATION SCREEN........... 102
ENTIRE ROUTE MAP SCREEN...................... 102
70
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3
1
NAVIGATION SYSTEM
2
3 ROUTE GUIDANCE
4 MEMORY POINTS
3
1. ROUTE GUIDANCE SCREEN.......... 106
1. MEMORY POINTS SETTINGS........... 118
SCREEN FOR ROUTE GUIDANCE............ 106
SETTING UP HOME .............................................. 119
ROUTE OVERVIEW ............................................ 108
SETTING UP PRESET DESTINATIONS...... 120
DURING FREEWAY DRIVING....................... 109
SETTING UP ADDRESS BOOK ..................... 122
WHEN APPROACHING
INTERSECTION...................................................... 111
SETTING UP AREAS TO AVOID................... 125
DELETING PREVIOUS
DESTINATIONS................................................... 127
TURN LIST SCREEN................................................ 112
TURN-BY-TURN ARROW SCREEN............. 112
2. TYPICAL VOICE GUIDANCE
PROMPTS ................................................ 113
3. EDITING ROUTE...................................... 114
5 SETUP
SCREENS FOR NAVIGATION
SETTINGS................................................................ 128
REORDERING DESTINATIONS..................... 114
DELETING DESTINATIONS ............................. 115
SETTING ROUTE PREFERENCES................. 115
6
8
2. TRAFFIC SETTINGS ............................... 133 9
SCREEN FOR TRAFFIC SETTINGS.............. 133
SELECTING ROUTE TYPE ................................ 115
DETOUR SETTING ................................................. 116
STARTING FROM ADJACENT ROAD........ 117
5
7
1. DETAILED NAVIGATION
SETTINGS................................................ 128
ADDING DESTINATIONS ................................. 114
4
6
TIPS FOR THE NAVIGATION
SYSTEM
1. GPS (GLOBAL POSITIONING
SYSTEM) .................................................. 135
LIMITATIONS OF THE NAVIGATION
SYSTEM .................................................................... 135
2. MAP DATABASE VERSION AND
COVERED AREA................................. 138
MAP INFORMATION .......................................... 138
ABOUT THE MAP DATA ................................... 138
71
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. BASIC OPERATION
1. QUICK REFERENCE
MAP SCREEN
To display this screen, press the “MAP” button on the Remote Touch.
No.
Name
Function
Page
2D north up, 2D
heading up or 3D
heading up symbol
Indicates whether the map orientation is set to
north-up or heading-up. The letter(s) beside this
symbol indicate the vehicle’s heading direction
(e.g. N for north). In 3D map, only a heading-up
view is available.
77
Scale indicator
This figure indicates the map scale.
76
“GPS” mark
(Global Positioning System)
Shows that the vehicle is receiving signals from
the GPS.
135
72
LX_Navi_OM60N29U_(U)
15.07.31 14:51
1. BASIC OPERATION
No.
*
Name
Page
Traffic indicator
Shows that traffic information is received. Select
to start voice guidance for traffic information.
When traffic information is received via HD Radio
broadcast, HD mark is displayed on the right.
86
Options button
Select to display the “Navigation Options” screen.
74
Zoom in/out button
Select to magnify or reduce the map scale. When
either button is selected, the map scale indicator
bar appears at the bottom of the screen.
76
Footprint
button
Select to display the footprint map screen.
76
Destination button
Select to display the “Destination” screen.
89
Speed limit icon
Indicates the speed limit on the current road. The
display of the speed limit icon can be set to on/off.
80
Route information bar
Displays the current street name, or the distance
with the estimated travel time/arrival time to the
destination. The route information bar fills from
left to right as the vehicle progresses on the route.
Route information button
Select to change the display between the current
street name and the distance with the estimated
travel/arrival time.
Screen
button
Select to change the map screen to full screen display.
map
change
3
NAVIGATION SYSTEM
Function
107

*: This function is not made available on some models.
INFORMATION
●Certain screen buttons on the map screen will disappear several seconds after the Remote
Touch has been operated. This setting can be changed so that all the screen buttons will
always be displayed.(P.128)
●Press the “MAP” button on the Remote Touch to display the address of the current position
on the map screen or repeat voice guidance.
73
LX_Navi_OM60N29U_(U)
15.07.31 14:51
1. BASIC OPERATION
NAVIGATION OPTIONS SCREEN
To display this screen, select
No.
on the map screen. (P.72)
Function
Page
Select to change the map configuration.
78
Select to change the displayed map information such as POI icons,
route trace, speed limit, etc.
80
Select to display the map version and coverage area.
138
Select to edit the set route.
114
Select to pause or resume route guidance.

Select to display the overview of the entire route.
108
74
LX_Navi_OM60N29U_(U)
15.07.31 14:51
1. BASIC OPERATION
2. MAP SCREEN OPERATION
CURRENT POSITION DISPLAY
1 Press the “MAP” button on the Remote
Touch.
INFORMATION
2 Check that the current position map is
displayed.
 Selecting
will change the map
screen to full screen display.
 To correct the current position manually:P.131
75
LX_Navi_OM60N29U_(U)
15.07.31 14:51
3
NAVIGATION SYSTEM
●While driving, the current position mark
is fixed on the screen and the map moves.
●The current position is automatically set
as the vehicle receives signals from the
GPS (Global Positioning System). If the
current position is not correct, it is automatically corrected after the vehicle
receives signals from the GPS.
●After the battery disconnection, or on a
new vehicle, the current position may not
be correct. As soon as the system
receives signals from the GPS, the correct current position is displayed.
1. BASIC OPERATION
MAP SCALE
1 Select
or
to change the
scale of the map screen.
FOOTPRINT MAP
For areas covered by the footprint map
(some major cities), a footprint map on a
scale of 75 ft. (25 m) can be selected.
When the map is scaled down to 150 ft.
(50 m),
changes to
and can
be selected to display the footprint map.
1 Select
on the map screen.
2 Check that the footprint map is dis The scale indicator bar appears at the bottom of the screen.
played.
 Select and hold
or
to continue
changing the scale of the map screen.
 The scale of the map screen can also be
changed by selecting the scale bar directly.
This function is not available while driving.
INFORMATION
●Press the “ ” button on the Remote
Touch to zoom in on the map screen and
the “ ” button to zoom out.
●In areas where the footprint map is available the map scale changes from
to
when at the minimum range.
 To return to the normal map display, select
.
INFORMATION
●If the map or the current position is
moved to the area which is not covered
by the footprint map, the screen scale
automatically changes to 150 ft. (50 m).
●On the footprint map, a one way street is
displayed by
.
●Scrolling on the footprint map is not available while driving.
Building footprints in the database were
created and provided by HERE.
76
LX_Navi_OM60N29U_(U)
15.07.31 14:51
1. BASIC OPERATION
3D CITY MODEL MAP
ORIENTATION OF THE MAP
A 3D city model map can be displayed
for some areas in major cities when the
map scale is 700 ft. (200 m) or less on
the 3D map screen.
 To display the normal map, select
.
●The 3D city model map can be set the
display on/off. (P.128)
ROTATING 3D MAP
3D map and 3D city model map can be
rotated when arrows appear around the
cursor while scrolling.
1 Select an arrow to rotate.
: North-up symbol
Regardless of the direction of vehicle travel,
north is always up.
: Heading-up symbol
The direction of vehicle travel is always up.
: 3D Heading-up symbol
The direction of vehicle travel is always up.
 The letter(s) beside this symbol indicate the
vehicle’s heading direction (e.g. N for
north).
INFORMATION
●The viewing angle of the 3D map can be
changed. (P.131)
77
LX_Navi_OM60N29U_(U)
15.07.31 14:51
3
NAVIGATION SYSTEM
INFORMATION
The orientation of the map can be
changed between 2D north-up, 2D
heading-up and 3D heading-up by selecting the orientation symbol displayed
at the top left of the screen.
1. BASIC OPERATION
SWITCHING THE MAP MODE
1 Select
on the map screen.
(P.74)
2 Select “Map Mode”.
3 Select the desired configuration button.
No.
SCREEN SCROLL
OPERATION
Use the scroll feature to move the desired point to the center of the screen for
looking at a point on the map that is different from the current position.
Function
Page
Select to display the single
map screen.

Cursor mark
Select to display the turn list
screen.
112
Distance from the current position to
the cursor mark
Select to display the freeway exit list screen.
109
Select to display the intersection guidance screen or
the guidance screen on the
freeway.
Select to register as a memory point.
To change the icon, name, etc.:
P.122
111
Select to display the turnby-turn arrow screen.
112
Select to set as a destination.
When selecting “Go to ” on the
following map screen, the navigation
system performs a search for the
route. (P.101)
If a destination has already been set,
“Go to ” and “Add to Route” will
be displayed.
“Go to ”: Select to delete the existing destination(s) and set a new one.
“Add to Route”: Select to add a destination.
 Depending on the conditions, certain
screen configuration buttons cannot be
selected.
No.
Information/Function
78
LX_Navi_OM60N29U_(U)
15.07.31 14:51
1. BASIC OPERATION
 To scroll over the map screen, place the
cursor mark in the desired position and
then press and hold the Remote Touch
knob. The map will continue scrolling in that
direction until the knob is released.
 Press the “MAP” button on the Remote
Touch to return to the current position.
ADJUSTING LOCATION IN
SMALL INCREMENTS
1 Select one of the 8 directional arrows to
move the cursor to the desired point
and then select “OK”.
79
LX_Navi_OM60N29U_(U)
15.07.31 14:51
3
NAVIGATION SYSTEM
The cursor location can be adjusted in
small increments when “Adjust Location” is selected on the setting map
screen.
Also, when changing the location of
memory points on the editing screen
(P.124) and adjusting the current position mark manually on the “Calibration”
screen (P.131), 8 directional arrows
may appear for this purpose.
1. BASIC OPERATION
3. MAP SCREEN INFORMATION
DISPLAYING MAP
INFORMATION
No.
Information such as POI icons, route
trace, speed limit, etc. can be displayed
on the map screen.
1 Select
2 Select “Map Information”.
3 Select the desired items to be displayed.
*
Page
Select to display traffic information.
86
Select to display speed limit
icon.

*: This function is not made available on
some models.
on the map screen.
(P.74)
No.
*
Function
Function
Page
Select to display the selected POI icons.

Select to select or change
POI icons.
81
Select
to
display
eDestination icons.
339
Select to display route
trace.
83
 When set to on, the indicator will illuminate.
80
LX_Navi_OM60N29U_(U)
15.07.31 14:51
1. BASIC OPERATION
SELECTING THE POI ICONS
1 Display the “Map Information” screen.
3 Select the desired POI category and select “OK”.
(P.80)
2 Select “Select POI”.
 When the POI icons to be displayed on the
map screen have already been set,
“Change POI” is displayed.
3
Information/Function
Page
Displays up to 5 selected
POI icons on the map
screen.

Select to cancel the selected POI icons.

Displays up to 6 POI icons
as favorite POI categories
130
Select to display other POI
categories if the desired
POIs cannot be found on
the screen.
82
Select to search for the
nearest POIs.
82
NAVIGATION SYSTEM
No.
81
LX_Navi_OM60N29U_(U)
15.07.31 14:51
1. BASIC OPERATION
■ SELECTING OTHER POI ICONS
TO BE DISPLAYED
1 Select “Other POIs”.
2 Select the desired POI categories and
select “OK”.
“List All Categories”: Select to display all
POI categories. To add more POI categories, select “More”.
■ DISPLAYING THE LOCAL POI
LIST
POIs that are within 20 miles (32 km) of
the current position will be listed from
among the selected categories.
1 Select “Find Local POI”.
2 Select the desired POI.
“Near...”: Select to search for POIs near the
current position or along the route.
3 Check that the selected POI is dis-
played on the map screen.
When “Near...” is selected
1 Select the desired item.
No.
Function
Select to search for POIs near the
current position.
Select to search for POIs along the
route.
82
LX_Navi_OM60N29U_(U)
15.07.31 14:51
1. BASIC OPERATION
ROUTE TRACE
■ STOP RECORDING THE ROUTE
TRACE
The traveled route can be stored and retraced on the map screen. This feature is
available when the map scale is 30 miles
(50 km) or less.
1 Display the “Map Information” screen.
■ START RECORDING THE ROUTE
TRACE
“Yes”: Select to keep the recorded
route trace.
“No”: Select to erase the recorded
route trace.
(P.80)
2 Select “Route Trace”.
 The “Route Trace” indicator illuminates and
the route trace starts.
2 Select “Route Trace” again.
3 A confirmation screen will be displayed.
INFORMATION
●The traveled route can be stored up to
124 miles (200 km).
3 Check that the traveled line is displayed.
83
LX_Navi_OM60N29U_(U)
15.07.31 14:51
3
NAVIGATION SYSTEM
1 Display the “Map Information” screen.
(P.80)
1. BASIC OPERATION
“Mark”: Select to register as a memory
point. To change the icon, name, etc.:
P.122
“Enter ”: Select to set as a destination.
DISPLAYING INFORMATION
ABOUT THE ICON WHERE
THE CURSOR IS SET
When the cursor is placed over an icon
on the map screen, the name bar is displayed on the upper part of the screen. If
“Info” appears on the right side of the
name bar, detailed information can be
displayed.
1 Place the cursor over an icon.
2 Select “Info”.
: Select to call the registered
number.
“Delete”: Select to delete destination or
memory point.
“Edit”: Select to display the edit memory
point screen.
“Detail”: Select to display detailed information.*
*: This function is not made available on some models.
84
LX_Navi_OM60N29U_(U)
15.07.31 14:51
1. BASIC OPERATION
INFORMATION
Icon
Name
Island
3
Park
NAVIGATION SYSTEM
●Even when traffic information is not currently being received, traffic information
and “Info” will be displayed for a while
after traffic information has been
received.
●In some situations, calls to a POI may
automatically change to an international
call or may not be possible as a domestic
call.
STANDARD MAP ICONS
Industry
Business facility
Airport
Military
University
Hospital
Stadium
Shopping mall
Golf
85
LX_Navi_OM60N29U_(U)
15.07.31 14:51
1. BASIC OPERATION
4. TRAFFIC INFORMATION*
Traffic data can be received via HD Radio broadcast or LEXUS App Suite to
display traffic information on the map
screen.
1 Press the “MENU” button on the
Remote Touch.
4 Select the desired item.
“Traffic Event List”: Select to display a list of
current traffic information. (P.87)
“Predictive Traffic Map”: Select to display a
map with predictive traffic data. (P.87)
INFORMATION
●If a large amount of information is being
received, it may take longer than normal
for the information to be displayed on the
screen.
2 Select “Info”.
3 Select “Traffic Incidents”.
*: This function is not made available on some models.
86
LX_Navi_OM60N29U_(U)
15.07.31 14:51
1. BASIC OPERATION
DISPLAYING TRAFFIC
INFORMATION
A list of current traffic information can
be displayed along with information on
the location and the distance of the incident.
“On Current Road”: Select to display traffic
information for the current road.
“On Current Route”: Select to display traffic information for the set route.
 When set to on, the indicator will illuminate.
A map with predictive traffic data can be
displayed.
1 Display the “Traffic” screen. (P.86)
2 Select “Predictive Traffic Map”.
3 Scroll the map to the desired point and
set the time of predictive traffic information.
 The time of the predictive traffic information can be displayed in 15-minute steps up
to +45 minutes.
“+”: Moves the time forward 15 minutes.
“-”: Moves the time back 15 minutes.
4 Check that the traffic information is displayed.
“Detail”: Select to display detailed traffic information.
87
LX_Navi_OM60N29U_(U)
15.07.31 14:51
3
NAVIGATION SYSTEM
1 Display the “Traffic” screen. (P.86)
2 Select “Traffic Event List”.
3 Select the desired traffic information.
DISPLAYING PREDICTIVE
TRAFFIC MAP
1. BASIC OPERATION
DISPLAYING TRAFFIC
INFORMATION ON THE MAP
1 Select
on the map screen.
(P.74)
2 Select “Map Information”.
3 Select “Traffic Information”.
 When set to on, the indicator will illuminate.
4 Check that the traffic information is displayed.
: The icons show traffic incident, road
repair, traffic obstacles, etc. Select to display traffic information and start voice guidance for the traffic information.
: The color of the arrow changes depending on the traffic information received.
The indicator is displayed as follows.
: Traffic information has been

received.
: Traffic information has been
received via HD Radio broadcast.
 No icon: Traffic information has not been
received.

88
LX_Navi_OM60N29U_(U)
15.07.31 14:51
2. DESTINATION SEARCH
1. DESTINATION SEARCH OPERATION
The “Destination” screen can be reached by the following methods:
From the map screen
Select “Dest.” on the map screen. (P.72)
From the “Menu” screen
Select “Destination” on the “Menu” screen. (P.14)
3
NAVIGATION SYSTEM
No.
Function
Page
Select to search for a destination by address.
92
Select to search for a destination by point of interest.
93
Select to search for a destination by online database.
336
Select to search for a destination via the Lexus response center.
338
Select to search for a destination from previously set destinations.
97
Select to search for a destination from a registered entry in “Address
Book”.
97
Select to search for a destination from emergency service points.
98
89
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. DESTINATION SEARCH
No.
Function
Page
Select to search for a destination by intersection or freeway entrance/
exit.
98
Select to search for a destination by the last displayed map.
100
Select to search for a destination by coordinates.
100
Select to set a destination by home.
91
Select to set a destination from preset destinations.
91
Select to delete set destinations.
115
90
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. DESTINATION SEARCH
SELECTING SEARCH AREA
The selected state (province) can be
changed to set a destination from a
different state (province) by using
“Address”, “Point of Interest” or
“Intersection & Freeway”.
(P.89)
2 Select “Address”, “Point of Interest” or
“Intersection & Freeway”.
3 Select “Select State/Province” or
“Change State/Province”.
To use this function, it is necessary to
register a home address. (P.119)
1 Display the “Destination” screen.
3
(P.89)
2 Select “Go Home”.
 The navigation system performs a search
for the route and the entire route map is
displayed. (P.101)
SETTING PRESET
DESTINATIONS AS
DESTINATION
To use this function, it is necessary to
register preset destinations to the preset
screen buttons (1-5). (P.120)
 If a state (province) has not been selected
yet, “Select State/Province” is displayed.
4 Select the desired state (province).
 To change countries, select the “United
States”, “Canada” or “Mexico” tab.
 For map database information and updates:
P.101
1 Display the “Destination” screen.
(P.89)
2 Select any of the preset destination buttons (1-5).
 The navigation system performs a search
for the route and the entire route map is
displayed. (P.101)
91
LX_Navi_OM60N29U_(U)
15.07.30 20:43
NAVIGATION SYSTEM
1 Display the “Destination” screen.
SETTING HOME AS
DESTINATION
2. DESTINATION SEARCH
SEARCHING BY CITY
SEARCHING BY ADDRESS
There are 2 methods to search for a destination by address.
1 Select “City”.
2 Enter a city name and select “OK”.
1 Display the “Destination” screen.
“Last 5 Cities”: Select the city name from
the list of the last 5 cities.
(P.89)
3
4
5
6
2 Select “Address”.
3 Select the desired search method.
Select the desired city name.
Enter a street name and select “OK”.
Select the desired street name.
Enter a house number and select “OK”.
 If the same address exists, the address list
screen will be displayed. Select the desired
address.
No.
Function
Page
Select to search by city.
92
Select to search by street
address.
93
92
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. DESTINATION SEARCH
SEARCHING BY STREET
ADDRESS
Select “Street Address”.
Enter a house number and select “OK”.
There are 4 methods to search for a destination by Points of Interest.
Enter a street name and select “OK”.
1 Display the “Destination” screen.
Select the desired street name.
Enter a city name and select “OK”.
Select the desired city name.
3
(P.89)
2 Select “Point of Interest”.
3 Select the desired search method.
NAVIGATION SYSTEM
1
2
3
4
5
6
SEARCHING BY POINT OF
INTEREST
 If the same address exists, the address list
screen will be displayed. Select the desired
address.
INFORMATION
●A street name can be searched using
only the body part of its name.
For example: S WESTERN AVE
• A search can be performed by entering
“S WESTERN AVE”, “WESTERN AVE”
or “WESTERN”.
No.
*
Function
Page
Select to search by name.
94
Select to search by category.
95
Select to search by phone
number.
96
Select to search
eDestination.
341
by
*: This function is not made available on
some models.
93
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. DESTINATION SEARCH
■ SELECTING A CITY TO SEARCH
SEARCHING BY NAME
1 Select “Name”.
2 Enter a POI name and select “OK”.
3 Select the desired POI.
1 Select “City”.
2 Enter a city name and select “OK”.
“Any City”: Select to cancel the city setting.
3 Select the desired city name.
4 Select the desired POI.
■ SELECTING FROM THE CATEGORIES
1 Select “Category”.
2 Select the desired category.
No.
Function
Page
Select to search for POI in
the desired city.
94
Select to search for POI
from the category list.
94
Select to search for POI using online database.
95
 If there is more than 1 detailed item of the
selected category, the detailed list will be
displayed.
“List All Categories”: Select to display all
POI categories.
3 Select the desired POI.
 When entering the name of a specific POI,
and there are 2 or more sites with the same
name, the list screen will be displayed.
Select the desired POI.
INFORMATION
●To search for a facility name using multiple search words, put a space between
each word.
94
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. DESTINATION SEARCH
■ SEARCHING FOR POI USING
WEB SEARCH*
1 Select “” next to “Web Search” to select a search engine.
SEARCHING BY CATEGORY
1 Select “Category”.
2 Select the desired search point.
3
 The selected search engine icon will be displayed on the top center of the POI list
screen.
3 Select the search engine icon.
No.
Function
Select to set the search point from
near the current position.
Select to search for POIs along the
set route.
 Accessing to a search engine
For the procedure on how to conduct a
search via a search engine, go to “SETTING A DESTINATION USING
LEXUS App Suite” (P.336), and follow the steps from 3 onward.
Select to set the search point from
near a city center. (P.96)
Select to set the search point from
near a destination. When more than
1 destination has been set, a list will
be displayed on the screen. Select
the item to be set.
*: This function is not made available on some models.
95
LX_Navi_OM60N29U_(U)
15.07.30 20:43
NAVIGATION SYSTEM
2 Select the desired search engine icon.
2. DESTINATION SEARCH
3 Select the desired POI category.
 If there is more than 1 detailed item of the
selected category, the detailed list will be
displayed.
“List All Categories”: Select to display all
POI categories.
“Favorite POI Categories”: Select to use
the 6 POIs that have been previously
set.(P.130)
4 Select the desired POI.
“Web Search”: Select to search for POI using online database. (P.95)
INFORMATION
●The names of POIs located within
approximately 200 miles (320 km) from
the selected search point can be displayed.
When “Near a City Center in XX*” is selected
1 Select “Near a City Center in XX”.
2 Enter a city name and select “OK”.
“Last 5 Cities”: Select the city name from
the list of the last 5 cities.
3 Select the desired city name.
4 Select “OK” when the city center map
screen is displayed.
5 Follow the steps from 3 onward in
“SEARCHING BY CATEGORY”.
(P.95)
*:XX represents the selected search area
name.
INFORMATION
●If the navigation system has never been
used, selecting the city name from “Last 5
Cities” will not be available.
SEARCHING BY PHONE
NUMBER
1 Select “Phone #”.
2 Enter a phone number and select “OK”.
 If there is more than 1 site with the same
number, the list screen will be displayed.
INFORMATION
●If there is no match for the entered phone
number, a list of identical numbers with
different area codes will be displayed.
96
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. DESTINATION SEARCH
SEARCHING BY ADDRESS
BOOK
The destination can be searched by calling an operator of Destination Assist.
You can request either a specific business, address, or ask for help locating
your desired destination. (P.338)
To use this function, it is necessary to
register an address book entry.
(P.122)
1 Display the “Destination” screen.
SEARCHING FROM
PREVIOUS DESTINATIONS
2 Select “Address Book”.
3 Select the desired address book entry.
(P.89)
“Options”: Select to register or edit address
book entries. (P.123)
1 Display the “Destination” screen.
(P.89)
2 Select “Previous Destinations”.
3 Select the desired destination.
“Previous Start Point”: Select to display the
start point map of the previous guided
route.
“Delete”: Select to delete the previous destination. (P.127)
INFORMATION
●The previous start point and up to 100
previously set destinations are displayed
on the screen.
*: This function is not made available on some models.
97
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3
NAVIGATION SYSTEM
DESTINATION SEARCH BY
DESTINATION ASSIST*
2. DESTINATION SEARCH
SEARCHING BY
EMERGENCY
1 Display the “Destination” screen.
(P.89)
2 Select “Emergency”.
3 Select the desired emergency category.
4 Select the desired destination.
INFORMATION
●The navigation system does not guide in
areas where route guidance is unavailable. (P.136)
SEARCHING BY
INTERSECTION AND
FREEWAY
There are 2 methods to search for a destination by Intersection & Freeway.
1 Display the “Destination” screen.
(P.89)
2 Select “Intersection & Freeway”.
3 Select the desired method.
No.
Function
Page
Select to search by intersection.
99
Select to search by freeway
entrance/exit.
99
98
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. DESTINATION SEARCH
SEARCHING BY
INTERSECTION
1 Select “Intersection”.
2 Enter the name of the first intersecting
SEARCHING BY FREEWAY
ENTRANCE/EXIT
3 Select the desired street name.
4 Enter the name of the second intersect-
1
2
3
4
5
5 Select the desired street name.
6 Select the desired entrance or exit
street which is located near the destination and select “OK”.
 If the 2 streets cross at more than 1 intersection in a city, the list of intersections will
be displayed.
Enter a freeway name and select “OK”.
Select the desired freeway.
3
Select “Entrance” or “Exit”.
Enter a freeway entrance or exit name
and select “OK”.
name.
INFORMATION
●Be sure to use the complete name of the
freeway or highway, including the hyphen,
when entering the destination. Freeways
and interstates use an “I” (I-405). US
highways use the state designation before
the number (CA-118).
99
LX_Navi_OM60N29U_(U)
15.07.30 20:43
NAVIGATION SYSTEM
ing street and select “OK”.
Select “Freeway Entrance / Exit”.
2. DESTINATION SEARCH
SEARCHING BY MAP
By selecting “Map” the last displayed location is displayed again on the map
screen. You can search for a destination
from this map.
1 Display the “Destination” screen.
(P.89)
2 Select “Map”.
3 Scroll the map to the desired point and
SEARCHING BY
COORDINATES
1 Display the “Destination” screen.
(P.89)
2 Select “Coordinates”.
3 Enter the latitude and longitude and select “OK”.
select “Go to ”.
“Adjust Location”: Select to adjust the position in smaller increments. (P.79)
 If a destination has already been set, “Go to
” and “Add to Route” will be displayed.
“Go to ”: Select to delete the existing destination(s) and set a new one.
“Add to Route”: Select to add a destination.
 The navigation system performs a search
for the route and the entire route map is
displayed. (P.101)
100
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. DESTINATION SEARCH
2. STARTING ROUTE GUIDANCE
When the destination is set, the confirm
destination screen will be displayed.
1 Select “Go” on the confirm destination
screen.
2 Select “OK” on the entire route map
screen.
●The route for returning may not be the
same as that for going.
●The route guidance to the destination
may not be the shortest route or a route
without traffic congestion.
●Route guidance may not be available if
there is no road data for the specified
location.
●When setting the destination on a map
with a scale more than 0.5 mile (800 m),
the map scale changes to 0.5 mile (800
m) automatically. If this occurs, set the
destination again.
●If a destination that is not located on a
road is set, the vehicle will be guided to
the point on a road nearest to the destination. The road nearest to the selected
point is set as the destination.
 For details about this screen: P.102
WARNING
●Be sure to obey traffic regulations and
keep road conditions in mind while driving. If a traffic sign on the road has been
changed, the route guidance may not
indicate such changed information.
101
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3
NAVIGATION SYSTEM
 For details about this screen: P.102
INFORMATION
2. DESTINATION SEARCH
CONFIRM DESTINATION
SCREEN
ENTIRE ROUTE MAP SCREEN
No.
No.
Function
Select to adjust the position in smaller increments. (P.79)
Select to register as a memory point.
Select to search for the route.
(P.101)
If a destination has already been set,
“Go Directly” and “Add to Route”
will be displayed.
“Go Directly”: Select to delete the
existing destination(s) and set a new
one.
“Add to Route”: Select to add a destination.
Select to call the registered number.
Information/Function
Select the desired route from 3 possible routes. (P.103)
Select to change the route.
(P.105)
Select to display a list of the turns required to reach the destination.
(P.104)
Current position
Destination point
Type of route and its distance
Distance of the entire route
 Select to start guidance.
 Select and hold to start demo
mode. (P.103)
102
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. DESTINATION SEARCH
STARTING DEMO MODE
Before starting the route guidance, the
demonstration of the route guidance
can be viewed.
3 ROUTES SELECTION
1 Select “Three Routes”.
2 Select the desired route.
1 Select and hold “OK” on the entire
3
route map screen until a beep sounds.
No.
Function
Select to display the quickest route.
Select to display the alternative
route.
Select to display the route that is the
shortest distance to the set destination.
Select to display the information
about the 3 routes. (P.104)
103
LX_Navi_OM60N29U_(U)
15.07.30 20:43
NAVIGATION SYSTEM
 During demo mode, “Demo” is displayed
on the map screen.
 Press the “MAP” button on the Remote
Touch to end demo mode.
2. DESTINATION SEARCH
■ DISPLAYING 3 ROUTES INFORMATION
1 Select “Info”.
2 Check that the “Information for Three
Routes” screen is displayed.
No.
DISPLAYING TURN LIST
A list of turn information from the current position to the destination can be
displayed.
1 Select “Turn List”.
2 Check that the turn list is displayed.
Information
Time necessary for the entire trip
Distance of the entire trip
Distance of the toll road
Distance of the freeway
Distance of the ferry trip
No.
Information
Current position
Distance to the next turn
Turn direction at the intersection
Select to display the map of the selected point.
INFORMATION
●However, not all road names on the route
may appear on the list. If a road changes
its name without requiring a turn (such as
on a street that runs through 2 or more
cities), the name change will not appear
on the list. The street names will be displayed in order from the starting point,
along with the distance to the next turn.
104
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. DESTINATION SEARCH
EDITING ROUTE
INFORMATION
Destinations can be added, reordered
or deleted, and conditions for the route
to the destination can be changed.
1 Select “Edit Route”.
2 Select the desired item.
Function
Page
Select to add destinations.
114
Select to delete destinations.
115
Select to reorder destinations.
114
Select to set route preferences.
115
Select to change route
type.
115
105
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3
NAVIGATION SYSTEM
No.
●Even if the “Freeways” indicator is
dimmed, the route cannot avoid including
a freeway in some cases. (P.115)
●If the calculated route includes a trip by
ferry, the route guidance shows a sea
route. After traveling by ferry, the current
position may be incorrect. Upon reception of GPS signals, it is automatically
corrected.
3. ROUTE GUIDANCE
1. ROUTE GUIDANCE SCREEN
During the route guidance, various
types of guidance screens can be displayed depending on conditions.
SCREEN FOR ROUTE
GUIDANCE
No.
INFORMATION
●If the vehicle goes off the guidance route,
the route is searched again.
●For some areas, the roads have not been
completely digitized in our database. For
this reason, the route guidance may
select a road that should not be traveled
on.
●When arriving at the set destination the
destination name will be displayed on the
upper part of the screen.
●When the head-up display is set to on,
turn-by-turn guidance arrows will be displayed on the windshield.
Information
Distance to the next turn and an arrow indicating the turning direction
Guidance route
Current position
Current street name or route information
106
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. ROUTE GUIDANCE
CHANGING ROUTE
INFORMATION BAR
When the vehicle is on the guidance
route, the route information bar displays
the current street name or the distance
with the estimated travel/arrival time to
the destination.
the route information button ( ) to
change the display of the route information bar.
No.
●When the vehicle is on the guidance
route, the distance measured along the
route is displayed. Travel time and arrival
time are calculated based on the average
speed for the specified speed limit.
●When the vehicle gets off the guidance
route, the arrow facing the destination is
displayed instead of the estimated travel/
arrival time.
●The route information bar fills from left to
right as the vehicle progresses on the
route.
Information
Select to change the display between the estimated travel time and
the estimated arrival time.
“Arrival Time”: Select to display the
estimated arrival time.
“Time to Dest.”: Select to display the
estimated travel time.
Select to change the display between the current street name and
the distance with the estimated travel/arrival time.
107
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3
NAVIGATION SYSTEM
1 Select the route information bar ( ) or
INFORMATION
3. ROUTE GUIDANCE
DISTANCE AND TRAVEL/
ARRIVAL TIME
When driving on the guidance route
with more than 1 destination set, a list of
the distance with estimated travel/arrival time from the current position to each
destination is displayed.
1 Select the route information bar.
ROUTE OVERVIEW
The entire route from the current position to the destination can be displayed
during the route guidance.
1 Select
on the map screen.
(P.74)
2 Select “Route Overview”.
3 Check that the entire route map is displayed.
 For details about this screen: P.101
2 Check that the list of the distance and
time is displayed.
 By selecting one of the number buttons, the
desired route information is displayed.
108
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. ROUTE GUIDANCE
DURING FREEWAY DRIVING
During freeway driving, the freeway information screen will be displayed.
INFORMATION
●When the map screen is set to full screen
display, the freeway information screen
will be displayed on the side display.
3
NAVIGATION SYSTEM
No./
Icon
Information/Function
Distance and time from the current
position to the freeway exit/rest area.
Name of the freeway exit/rest area.
POIs that are close to a freeway exit
Select to display the selected map of
the exit vicinity.
Select to display the nearest freeway
exits/rest areas from the current position.
Select to scroll to farther freeway exits/rest areas.
Select to scroll to freeway exits/rest
areas.
109
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. ROUTE GUIDANCE
WHEN APPROACHING
FREEWAY EXIT OR
JUNCTION
When the vehicle approaches an exit or
junction, the freeway guidance screen
will be displayed.
TOLLGATE GUIDANCE
When the vehicle approaches a tollgate,
the tollgate view will be displayed.
No.
No.
Information/Function
Next exit or junction name
Distance from the current position to
the exit or junction
Select to hide the freeway guidance
screen.
To return to the freeway guidance
screen, press the “MAP” button on
the Remote Touch.
Information/Function
Distance from the current position to
the tollgate
Select to hide the tollgate guidance
screen.
To return to the tollgate guidance
screen, press the “MAP” button on
the Remote Touch.
Remaining distance bar to the guidance point
Remaining distance bar to the guidance point
110
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. ROUTE GUIDANCE
REAL FREEWAY JUNCTION
VIEW
When the vehicle approaches a junction, the junction view with signage will
be displayed.
Information/Function
Next junction or street name
Select to hide the real freeway junction view.
To return to the real freeway junction
view, press the “MAP” button on the
Remote Touch.
When the vehicle approaches an intersection, the intersection guidance
screen will be displayed.
No.
Information/Function
Next street name
Select to hide the intersection guidance screen.
To return to the intersection guidance screen, press the “MAP” button on the Remote Touch.
Distance from the current position to
the next junction
Distance to the intersection
Remaining distance bar to the guidance point
Remaining distance bar to the guidance point
INFORMATION
●When the map screen is set to full screen
display, the intersection guidance screen
will be displayed on the side display.
111
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3
NAVIGATION SYSTEM
No.
WHEN APPROACHING
INTERSECTION
3. ROUTE GUIDANCE
TURN LIST SCREEN
1 Select “Turn List” on the “Map Mode”
screen. (P.78)
2 Check that the turn list screen is displayed.
TURN-BY-TURN ARROW
SCREEN
On this screen, information about the
next turn on the guidance route can be
displayed.
1 Select “Turn-by-Turn Arrow” on the
“Map Mode” screen. (P.78)
2 Check that the turn-by-turn arrow
screen is displayed.
No.
Information
Turn direction
Distance between turns
Next street or destination name
No.
Information
Exit number or street name
INFORMATION
●When the map screen is set to full screen
display, the turn list screen will be displayed on the side display.
Turn direction
Distance to the next turn
INFORMATION
●When the map screen is set to full screen
display, the turn-by-turn arrow screen will
be displayed on the side display.
112
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. ROUTE GUIDANCE
2. TYPICAL VOICE GUIDANCE PROMPTS
As the vehicle approaches an intersection, or point, where maneuvering the
vehicle is necessary, the system’s voice
guidance will provide various messages.
WARNING
3
NAVIGATION SYSTEM
●Be sure to obey the traffic regulations and
keep the road condition in mind especially when you are driving on IPD roads
(roads that are not completely digitized in
our database). The route guidance may
not have the updated information such as
the direction of a one way street.
INFORMATION
●If a voice guidance command cannot be
heard, press the “MAP” button on the
Remote Touch.
●To adjust the voice guidance volume:
P.63
●Voice guidance may be made early or
late.
●If the system cannot determine the current position correctly, you may not hear
voice guidance or may not see the magnified intersection on the screen.
113
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. ROUTE GUIDANCE
3. EDITING ROUTE
1 Select
ADDING DESTINATIONS
on the map screen.
(P.74)
1 Display the “Route” screen. (P.114)
2 Select “Add”.
3 Search for an additional destination in
2 Select “Edit Route”.
3 Select the item to be set.
the same way as a destination search.
(P.89)
4 Select “Add Destination Here” to insert
the new destination into the route.
No.
Function
Page
Select to add destinations.
114
Select to delete destinations.
115
Select to reorder destinations.
114
Select to set route preferences.
115
Select to change route
type.
115
Select to set detours.
116
Select to start from adjacent road.
117
REORDERING
DESTINATIONS
When more than 1 destination has been
set, the arrival order of the destinations
can be changed.
1 Display the “Route” screen. (P.114)
2 Select “Reorder”.
3 Select the desired destination and se-
lect “Move Up” or “Move Down” to
change the arrival order. Then select
“OK”.
4 Check that the entire route map is displayed. (P.102)
114
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. ROUTE GUIDANCE
DELETING DESTINATIONS
1 Display the “Route” screen. (P.114)
2 Select “Delete”.
3 Select “Yes” when the confirmation
screen appears.
“Delete All”: Select to delete all destinations on the list.
 If more than 1 destination has been set, the
system will recalculate the route(s) to the
set destination(s) as necessary.
The conditions to determine the route
can be selected from various choices
such as freeways, toll roads, ferries, etc.
1 Display the “Route” screen. (P.114)
2 Select “Preferences”.
3 Select the desired route preferences
and select “OK”.
 When set to on, the indicator will illuminate.
SELECTING ROUTE TYPE
1 Display the “Route” screen. (P.114)
2 Select “Route Type”.
3 Select the desired route type and select
“OK”.
 During driving, the route guidance starts
after selecting the desired route type.
4 The entire route from the starting point
to the destination is displayed.
 For details about this screen: P.101
115
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3
NAVIGATION SYSTEM
 When more than 1 destination has been set,
a list will be displayed on the screen. Select
the item(s) to be deleted.
SETTING ROUTE
PREFERENCES
3. ROUTE GUIDANCE
DETOUR SETTING
INFORMATION
During the route guidance, the route
can be changed to detour around a section of the route where a delay is caused
by road repairs, an accident, etc.
1 Display the “Route” screen. (P.114)
2 Select “Detour”.
3 Select the desired detour distance.
No.
Function
Select to detour within 1 mile of the
current position.
Select to detour within 3 miles of the
current position.
●This picture shows an example of how the
system would guide around a delay
caused by a traffic jam.
This position indicates the location of a
traffic jam caused by road repairs, an accident, etc.
This route indicates the detour suggested by the system.
●When the vehicle is on a freeway, the
detour distance selections are 5, 15 and
25 miles (or 5, 15 and 25 km if units are
in km).
●The system may not be able to calculate a
detour route depending on the selected
distance and surrounding road conditions.
Select to detour within 5 miles of the
current position.
Select to detour on the entire route.
*
Select to make the system search for
the route based on traffic congestion
information received from traffic information. (P.86)
*: This function is not made available on
some models.
116
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. ROUTE GUIDANCE
STARTING FROM ADJACENT
ROAD
When a freeway and a surface road run
in parallel, the system may show the
guidance route going on the freeway
while driving on the surface road, or vice
versa.
If this happens, you can instantly choose
the adjacent road for the route guidance.
3
NAVIGATION SYSTEM
1 Display the “Route” screen. (P.114)
2 Select “Start from Adjacent Road”.
INFORMATION
●When there is no adjacent road, this
screen button will not be displayed.
117
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4. MEMORY POINTS
1. MEMORY POINTS SETTINGS
Home, preset destinations, address
book entries, areas to avoid can be set
as memory points. The registered points
can be used as the destinations.
(P.89)
Registered areas to avoid, will be avoided when the system searches for a route.
4 Select the desired item to be set.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation”.
No.
Function
Page
Select to set home.
119
Select to set preset destinations.
120
Select to set the address
book.
122
Select to set areas to avoid.
125
Select to delete previous
destinations.
127
Select to set detailed navigation settings.
128
118
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4. MEMORY POINTS
EDITING HOME
SETTING UP HOME
If home has been registered, that information can be recalled by selecting “Go
Home” on the “Destination” screen.
(P.91)
1 Select “Edit”.
2 Select the desired item to be edited.
3
1 Display the “Navigation Settings”
2 Select “Home”.
3 Select the desired item to be set.
No.
No.
Function
Page
Select to register home.
119
Select to edit home.
119
Select to delete home.
119
REGISTERING HOME
1 Select “Set Home Location”.
2 Select the desired item to search for the
location. (P.89)
3 Select “OK” when the editing home
Function
Page
Select to edit the home
name.
124
Select to set display of the
home name on/off.

Select to edit location information.
124
Select to edit the phone
number.
124
Select to change the icon to
be displayed on the map
screen.
123
3 Select “OK”.
DELETING HOME
1 Select “Delete”.
2 Select “Yes” when the confirmation
screen appears.
screen appears.
119
LX_Navi_OM60N29U_(U)
15.07.30 20:43
NAVIGATION SYSTEM
screen. (P.118)
4. MEMORY POINTS
REGISTERING PRESET
DESTINATIONS
SETTING UP PRESET
DESTINATIONS
If a preset destination has been registered, that information can be recalled
by using preset destinations on the
“Destination” screen. (P.91)
1 Display the “Navigation Settings”
screen. (P.118)
1 Select “Set”.
2 Select the desired item to search for the
location. (P.89)
3 Select a position for this preset destination.
4 Select “OK” when the editing preset
destination screen appears. (P.121)
2 Select “Preset Destinations”.
3 Select the desired item.
INFORMATION
●Up to 5 preset destinations can be registered.
No.
Function
Page
Select to register a preset
destination.
120
Select to edit a preset destination.
121
Select to delete a preset
destination.
121
120
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4. MEMORY POINTS
EDITING PRESET
DESTINATIONS
DELETING PRESET
DESTINATIONS
1 Select “Edit”.
2 Select the desired preset destination.
3 Select the item to be edited.
1 Select “Delete”.
2 Select the preset destination to be deleted and select “Delete”.
3 Select “Yes” when the confirmation
No.
Function
Page
Select to edit the preset
destination name.
124
Select to set display of the
preset destination name
on/off.

Select to edit location information.
124
Select to edit the phone
number.
124
Select to change the icon to
be displayed on the map
screen.
123
NAVIGATION SYSTEM
screen appears.
4 Select “OK”.
121
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3
4. MEMORY POINTS
SETTING UP ADDRESS BOOK
Points on the map can be registered.
1 Display the “Navigation Settings”
screen. (P.118)
REGISTERING ADDRESS
BOOK ENTRIES
1 Select “New”.
2 Select the desired item to search for the
location. (P.89)
2 Select “Address Book”.
3 Select the desired item.
3 Select “OK” when the editing address
book entry screen appears. (P.123)
INFORMATION
●Up to 100 address book entries can be
registered.
No.
Function
Page
Select to register address
book entries.
122
Select to edit address book
entries.
123
Select to delete address
book entries.
124
122
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4. MEMORY POINTS
■ CHANGING THE ICON
EDITING ADDRESS BOOK
ENTRIES
The icon, name, location and/or phone
number of a registered address book
entry can be edited.
1 Select “Edit” next to the “Icon”.
2 Select the desired icon.
3
 Change pages by selecting the “Page 1”,
“Page 2” or “With Sound” tab.
“With Sound”: Select the memory points
with a sound
When the “With Sound” tab is selected
No.
Function
Page
Select to edit the address
book entry name.
124
Select to set display of the
address book entry name
on/off.

Select to edit location information.
124
Select to edit the phone
number.
124
Select to change the icon to
be displayed on the map
screen.
123
A sound for some address book entries
can be set. When the vehicle approaches the location of the address book entry, the selected sound will be heard.
1 Select the “With Sound” tab.
2 Select the desired sound icon.
: Select to play the sound.
 When “Bell (with Direction)” is selected,
select an arrow to adjust the direction and
select “OK”.
INFORMATION
●The bell sounds only when the vehicle
approaches this point in the direction that
has been set.
4 Select “OK”.
123
LX_Navi_OM60N29U_(U)
15.07.30 20:43
NAVIGATION SYSTEM
1 Select “Edit”.
2 Select the desired address book entry.
3 Select the item to be edited.
4. MEMORY POINTS
■ CHANGING THE NAME
1 Select “Edit” next to “Name”.
2 Enter a name and select “OK”.
■ CHANGING THE LOCATION
1 Select “Edit” next to “Location”.
2 Scroll the map to the desired point
(P.79) and select “OK”.
DELETING ADDRESS BOOK
ENTRIES
1 Select “Delete”.
2 Select the item to be deleted and select
“Delete”.
3 Select “Yes” when the confirmation
screen appears.
■ CHANGING PHONE NUMBER
1 Select “Edit” next to “Phone #”.
2 Enter the phone number and select
“OK”.
124
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4. MEMORY POINTS
REGISTERING AREAS TO
AVOID
SETTING UP AREAS TO
AVOID
Areas to be avoided because of traffic
jams, construction work or other reasons can be registered as “Areas to
Avoid”.
screen. (P.118)
location. (P.89)
3 Select either
or
to
change the size of the area to be avoided and select “OK”.
2 Select “Areas to Avoid”.
3 Select the desired item.
4 Select “OK” when the editing area to
avoid screen appears.
No.
Function
Page
Select to register areas to
avoid.
125
Select to edit areas to
avoid.
126
Select to delete areas to
avoid.
126
INFORMATION
●If a destination is entered in the area to
avoid or the route calculation cannot be
made without running through the area to
avoid, a route passing through the area to
be avoided may be shown.
●Up to 10 locations can be registered as
points/areas to avoid.
125
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3
NAVIGATION SYSTEM
1 Display the “Navigation Settings”
1 Select “New”.
2 Select the desired item to search for the
4. MEMORY POINTS
EDITING AREAS TO AVOID
The name, location and/or area size of a
registered area can be edited.
■ CHANGING THE NAME
1 Select “Edit” next to “Name”.
2 Enter a name and select “OK”.
■ CHANGING THE LOCATION
1 Select “Edit”.
2 Select the area and select “OK”.
3 Select the item to be edited.
1 Select “Edit” next to “Location”.
2 Scroll the map to the desired point
(P.79) and select “OK”.
■ CHANGING THE AREA SIZE
1 Select “Edit” next to “Size”.
2 Select either
or
to
change the size of the area to be avoided and select “OK”.
No.
Function
Page
Select to edit the name of
the area to avoid.
126
Select to set display of the
area to avoid name on/off.

Select to edit area location.
126
Select to edit area size.
126
Select to set the area to
avoid function on/off.

DELETING AREAS TO AVOID
1 Select “Delete”.
2 Select the area to be deleted and select
“Delete”.
3 Select “Yes” when the confirmation
screen appears.
4 Select “OK”.
126
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4. MEMORY POINTS
DELETING PREVIOUS
DESTINATIONS
Previous destinations can be deleted.
1 Display the “Navigation Settings”
screen. (P.118)
3
NAVIGATION SYSTEM
2 Select “Delete Previous Dest.”.
3 Select the previous destination to be deleted and select “Delete”.
4 Select “Yes” when the confirmation
screen appears.
127
LX_Navi_OM60N29U_(U)
15.07.30 20:43
5. SETUP
1. DETAILED NAVIGATION SETTINGS
Settings are available for pop-up information, favorite POI categories, low fuel
warning, etc.
SCREENS FOR NAVIGATION
SETTINGS
1 Press the “MENU” button on the
Remote Touch.
2
3
4
5
Select “Setup”.
Select “Navigation”.
Select “Detailed Navi. Settings”.
Select the items to be set.
128
LX_Navi_OM60N29U_(U)
15.07.30 20:43
5. SETUP
No.
Function
Page

Select to set display of popup information on/off.

Select to set favorite POI
categories that are used for
POI selection to display on
the map screen.
130
Select to set display of low
fuel warning on/off.
130
Select to set IPD road guidance on/off.

Select to set the voice guidance for the next street
name on/off.

Select to set display of the
3D city model map on/off.

Select to change the viewing angle of the 3D map.
131
Function
Page
Select to adjust the current
position mark manually or
to adjust miscalculation of
the distance caused by tire
replacement.
131
Select to reset all setup
items.

3
NAVIGATION SYSTEM
Select to set the automatic
screen button hiding function on/off. When set to on,
certain screen buttons on
the map screen will disappear several seconds after
the Remote Touch has
been operated. When set
to off, all the screen buttons
will always be displayed.
No.
129
LX_Navi_OM60N29U_(U)
15.07.30 20:43
5. SETUP
FAVORITE POI CATEGORIES
(SELECT POI ICONS)
Up to 6 POI icons, which are used for
selecting POIs on the map screen, can
be selected as favorites.
1 Display the “Detailed Navi. Settings”
screen. (P.128)
2 Select “Favorite POI Categories”.
3 Select the category to be changed.
LOW FUEL WARNING
When the fuel level is low, a warning
message will pop up on the screen.
1 Display the “Detailed Navi. Settings”
screen. (P.128)
2 Select “Low Fuel Warning”.
3 Select “On” or “Off”.
■ SEARCHING GAS STATION IN
LOW FUEL WARNING
A nearby gas station can be selected as
a destination.
1 Select “Yes” when the low fuel warning
appears.
“Default”: Select to set the default categories.
4 Select the desired POI category.
2 Select the desired nearby gas station.
3 Select “Enter ” to set as a destination.
“Info”: Select to display gas station information. (P.84)
“List All Categories”: Select to display all
POI categories.
5 Select the desired POI icon.
130
LX_Navi_OM60N29U_(U)
15.07.30 20:43
5. SETUP
CHANGING VIEWING
ANGLE OF 3D MAP
1 Display the “Detailed Navi. Settings”
screen. (P.128)
2 Select “3D Map Viewing Angle”.
3 Select “Up” or “Down” to change the
The current position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement can
also be adjusted.
1 Display the “Detailed Navi. Settings”
screen. (P.128)
2 Select “Calibration”.
3 Select the desired item.
 For additional information on the accuracy of a current position: P.135
“Default”: Select to set the initial angle.
■ POSITION/DIRECTION
BRATION
CALI-
When driving, the current position mark
will be automatically corrected by GPS
signals. If GPS reception is poor due to
location, the current position mark can
be adjusted manually.
1 Select “Position / Direction”.
2 Scroll the map to the desired point
(P.79) and select “OK”.
3 Select an arrow to adjust the direction of
the current position mark and select
“OK”.
131
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3
NAVIGATION SYSTEM
viewing angle.
CURRENT POSITION/TIRE
CHANGE CALIBRATION
5. SETUP
■ TIRE CHANGE CALIBRATION
The tire change calibration function will
be used when replacing the tires. This
function will adjust miscalculation
caused by the circumference difference
between the old and new tires.
1 Select “Tire Change”.
 The message appears and the quick distance calibration starts automatically.
INFORMATION
●If this procedure is not performed when
the tires are replaced, the current position mark may be incorrectly displayed.
132
LX_Navi_OM60N29U_(U)
15.07.30 20:43
5. SETUP
2. TRAFFIC SETTINGS*
Traffic information such as traffic congestion or traffic incident warnings can
be made available.
SCREEN FOR TRAFFIC
SETTINGS
1 Press the “MENU” button on the
Remote Touch.
3
Function
Select to set the avoid traffic function
auto/manual. (P.134)
2 Select “Setup”.
3 Select “Traffic”.
4 Select the items to be set.
Select to set the usage of traffic information for the estimated arrival time
on/off.
Select to set the display of an arrow
of free flowing traffic on/off.
Select to set to on/off whether to
consider the predictive traffic information (P.87) with estimated arrival time and detoured route search.
Select to set traffic incident voice
warning on/off.
Select to reset all setup items.
*: This function is not made available on some models.
133
LX_Navi_OM60N29U_(U)
15.07.30 20:43
NAVIGATION SYSTEM
No.
5. SETUP
AUTO AVOID TRAFFIC
1 Display the “Traffic Settings” screen.
(P.133)
2 Select “Avoid Traffic”.
3 Select the desired item.
No.
Function
Select to automatically change
routes when congestion information
of the guidance route has been received.
Select to select manually whether or
not to change routes when congestion information of the guidance
route has been received. In this
mode, a screen will appear to ask if
you wish to reroute.
■ CHANGING THE ROUTE MANUALLY
When the navigation system calculates
a new route, the following screen will be
displayed.
1 Select the desired item.
No.
Function
Select to start route guidance using
the new route.
Select to confirm the new route and
current route on the map.
Select to continue the current route
guidance.
Select to not reroute when congestion information for the guidance
route has been received.
134
LX_Navi_OM60N29U_(U)
15.07.30 20:43
6. TIPS FOR THE NAVIGATION SYSTEM
1. GPS (GLOBAL POSITIONING SYSTEM)
LIMITATIONS OF THE
NAVIGATION SYSTEM
The Global Positioning System (GPS) developed and operated by the U.S. Department of Defense provides an accurate
current position, normally using 4 or more
satellites, and in some case 3 satellites. The
GPS system has a certain level of inaccuracy. While the navigation system compensates for this most of the time, occasional
positioning errors of up to 300 ft. (100 m)
can and should be expected. Generally, position errors will be corrected within a few
seconds.
NAVIGATION SYSTEM
This navigation system calculates the
current position using satellite signals,
various vehicle signals, map data, etc.
However, an accurate position may not
be shown depending on satellite conditions, road configuration, vehicle condition or other circumstances.
When the vehicle is receiving signals from
satellites, the “GPS” mark appears at the
top left of the screen.
The GPS signal may be physically obstructed, leading to inaccurate vehicle position on
the map screen. Tunnels, tall buildings,
trucks, or even the placement of objects on
the instrument panel may obstruct the GPS 3
signals.
The GPS satellites may not send signals due
to repairs or improvements being made to
them.
Even when the navigation system is receiving clear GPS signals, the vehicle position
may not be shown accurately or inappropriate route guidance may occur in some cases.
NOTICE
●The installation of window tinting may
obstruct the GPS signals. Most window
tinting contains some metallic content
that will interfere with GPS signal reception of the antenna in the instrument
panel. We advise against the use of window tinting on vehicles equipped with
navigation systems.
135
LX_Navi_OM60N29U_(U)
15.07.31 14:51
6. TIPS FOR THE NAVIGATION SYSTEM
 Accurate current position may not be
shown in the following cases:
• When driving on a small angled Y-shaped
road.
• When driving on a winding road.
• When driving on a slippery road such as
in sand, gravel, snow, etc.
• When driving on a long straight road.
• When freeway and surface streets run in
parallel.
• After moving by ferry or vehicle carrier.
• When a long route is searched during
high speed driving.
• When driving without setting the current
position calibration correctly.
• After repeating a change of direction by
going forward and backward, or turning
on a turntable in a parking lot.
• When leaving a covered parking lot or
parking garage.
• When a roof carrier is installed.
• When driving with tire chains installed.
• When the tires are worn.
• After replacing a tire or tires.
• When using tires that are smaller or
larger than the factory specifications.
• When the tire pressure in any of the 4
tires is not correct.
 If the vehicle cannot receive GPS signals,
the current position can be adjusted
manually. For information on setting the
current position calibration: P.131
 Inappropriate route guidance may occur in
the following cases:
• When turning at an intersection off the
designated route guidance.
• If you set more than 1 destination but skip
any of them, auto reroute will display a
route returning to the destination on the
previous route.
• When turning at an intersection for which
there is no route guidance.
• When passing through an intersection for
which there is no route guidance.
• During auto reroute, the route guidance
may not be available for the next turn to
the right or left.
• During high speed driving, it may take a
long time for auto reroute to operate. In
auto reroute, a detour route may be
shown.
• After auto reroute, the route may not be
changed.
• If an unnecessary U-turn is shown or
announced.
• If a location has multiple names and the
system announces 1 or more of them.
• When a route cannot be searched.
• If the route to your destination includes
gravel, unpaved roads or alleys, the route
guidance may not be shown.
• Your destination point might be shown on
the opposite side of the street.
• When a portion of the route has regulations prohibiting the entry of the vehicle
that vary by time, season or other reasons.
• The road and map data stored in the navigation system may not be complete or
may not be the latest version.
136
LX_Navi_OM60N29U_(U)
15.07.31 14:51
6. TIPS FOR THE NAVIGATION SYSTEM
 After replacing a tire: P.132
INFORMATION
●This navigation system uses tire turning
data and is designed to work with factoryspecified tires for the vehicle. Installing
tires that are larger or smaller than the
originally equipped diameter may cause
inaccurate display of the current position.
The tire pressure also affects the diameter of the tires, so make sure that the tire
pressure of all 4 tires is correct.
3
NAVIGATION SYSTEM
137
LX_Navi_OM60N29U_(U)
15.07.31 14:51
6. TIPS FOR THE NAVIGATION SYSTEM
2. MAP DATABASE VERSION AND COVERED AREA
MAP INFORMATION
ABOUT THE MAP DATA
Coverage areas and legal information
can be displayed and map data can be
updated.
Map data for the navigation system is
contained in a microSD card that is inserted in the microSD card slot located
at the bottom of the audio control panel.
Do not eject the microSD card, as doing
so may deactivate the navigation system.
1 Select
on the map screen.
(P.74)
2 Select “Map Data”.
3 Check that the map data screen is displayed.
No.
Function
Map version
Select to update map.
Select to display map coverage areas.
NOTICE
●Do not edit or delete the map data on the
microSD card, as doing so may deactivate the navigation system.
INFORMATION
Select to display legal information.
INFORMATION
●Map data updates are available for a fee.
Contact your Lexus dealer for further
information.
●microSDHC Logo is a trademark of SD3C,LLC.
138
LX_Navi_OM60N29U_(U)
15.07.31 14:51
4
1
AUDIO/VISUAL SYSTEM
2
1
BASIC OPERATION
1. QUICK REFERENCE ............................ 142
2. SOME BASICS ......................................... 144
TURNING THE SYSTEM ON AND
OFF.............................................................................. 144
SELECTING AN AUDIO SOURCE ............. 145
DISC SLOT.................................................................. 146
USB/AUX PORT ..................................................... 147
“Sound Settings” SCREEN ................................... 149
2 RADIO OPERATION
3
1. AM/FM RADIO........................................ 153
OVERVIEW................................................................ 153
4
PRESET BUTTON SCREEN .............................. 156
SELECTING A STATION FROM
THE LIST.................................................................... 157
5
CACHING A RADIO PROGRAM ............... 157
RADIO BROADCAST DATA SYSTEM ...... 159
USING HD Radio™ TECHNOLOGY.......... 160
AUDIO SCREEN ADJUSTMENT.................... 151
AVAILABLE HD Radio™
TECHNOLOGY.................................................. 160
VOICE COMMAND SYSTEM........................ 152
TROUBLESHOOTING GUIDE ...................... 162
6
7
2. XM Satellite Radio.................................... 163 8
OVERVIEW................................................................ 163
HOW TO SUBSCRIBE TO AN XM
Satellite Radio.......................................................... 165
DISPLAYING THE RADIO ID .......................... 167
SELECTING A CHANNEL FROM
THE LIST.................................................................... 167
IF THE SATELLITE RADIO TUNER
MALFUNCTIONS .............................................. 168
3. INTERNET RADIO .................................. 170
LISTENING TO INTERNET RADIO.............. 170
139
LX_Navi_OM60N29U_(U)
15.07.30 20:43
9
3 MEDIA OPERATION
6
TIPS FOR OPERATING THE
AUDIO/VISUAL SYSTEM
1. CD ................................................................... 171
OVERVIEW.................................................................. 171
1. OPERATING INFORMATION ......... 207
RADIO.......................................................................... 207
2. DVD ............................................................... 174
DVD PLAYER AND DISC ................................ 208
OVERVIEW................................................................ 174
iPod.................................................................................. 213
DVD OPTIONS......................................................... 177
FILE INFORMATION............................................ 215
3. USB MEMORY ......................................... 179
TERMS........................................................................... 217
OVERVIEW................................................................ 179
ERROR MESSAGES.............................................. 219
4. iPod................................................................ 183
OVERVIEW................................................................ 183
iPod AUDIO ............................................................... 187
iPod VIDEO ................................................................ 187
5. Bluetooth® AUDIO................................. 188
OVERVIEW................................................................ 188
®
CONNECTING A Bluetooth DEVICE..... 193
®
7
REAR SEAT ENTERTAINMENT
SYSTEM FEATURES
1. REAR SEAT ENTERTAINMENT
SYSTEM FEATURES ................................ 221
QUICK REFERENCE............................................ 221
DISPLAY ..................................................................... 223
LISTENING TO Bluetooth AUDIO............. 193
2. SOME BASICS........................................ 224
6. AUX............................................................... 194
USING THE REMOTE CONTROLLER ..... 224
OVERVIEW................................................................ 194
EXTERNAL OPTIONS......................................... 197
4
AUDIO/VISUAL REMOTE
CONTROLS
1. STEERING SWITCHES......................... 198
TURNING ON/OFF THE REAR
ENTERTAINMENT SYSTEM........................ 225
CONNECTING A DEVICE TO REAR
A/V INPUT PORT .............................................. 226
SELECTING THE SOUND MODE .............. 226
SELECTING THE SOURCE ............................. 227
OPERATING REAR SEAT
ENTERTAINMENT SYSTEM FROM
THE FRONT SEATS.......................................... 228
5 SETUP
1. AUDIO SETTINGS ................................. 201
AUDIO SETTINGS SCREEN............................ 201
140
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1
2
8
REAR SEAT ENTERTAINMENT
SYSTEM OPERATION
1. AM/FM/SAT RADIO ............................ 229
OVERVIEW............................................................... 229
2. CD.................................................................. 231
OVERVIEW................................................................ 231
3. DVD.............................................................. 234
OVERVIEW............................................................... 234
DVD VIDEO OPTIONS..................................... 236
4. USB MEMORY......................................... 241
OVERVIEW................................................................ 241
5. iPod ............................................................... 244
OVERVIEW............................................................... 244
iPod AUDIO .............................................................. 246
9
SETUP FOR REAR SEAT
ENTERTAINMENT SYSTEM
3
1. REAR SEAT ENTERTAINMENT
4
SYSTEM SETTINGS................................. 251
DISPLAYING THE SETTING SCREEN....... 251
TIPS FOR OPERATING REAR
10 SEAT ENTERTAINMENT
SYSTEM
5
6
1. OPERATING INFORMATION......... 254 7
CAUTION SCREEN............................................ 254
APPEARS ON THE
WHEN
SCREEN ................................................................. 254
8
THE REMOTE CONTROLLER...................... 254
HEADPHONES...................................................... 255
VOLUME................................................................... 255
6. Bluetooth® AUDIO ................................ 247
A/V INPUT PORT ................................................. 256
OVERVIEW............................................................... 247
COPYRIGHTS AND TRADEMARKS........ 256
®
Bluetooth AUDIO................................................ 249
7. EXTERNAL DEVICES........................... 250
OVERVIEW.............................................................. 250
141
LX_Navi_OM60N29U_(U)
15.07.30 20:43
9
1. BASIC OPERATION
1. QUICK REFERENCE
The audio control screen can be reached by the following methods:
Using the instrument panel
Press the “RADIO” or “MEDIA” button.
From the “Menu” screen
Press the “MENU” button on the Remote Touch, then select “Radio” or “Media”.
The audio functions can also be displayed and operated on the side display.
(P.351)
Some audio functions can also be operated from the rear seat.
(P.221)
■ CONTROL SCREEN
142
LX_Navi_OM60N29U_(U)
15.08.06 12:29
1. BASIC OPERATION
■ CONTROL PANEL
4
AUDIO/VISUAL SYSTEM
Function
Page
Using the radio
153
Playing an audio CD or MP3/WMA/AAC disc
171
Playing a DVD
174
Playing a USB memory
179
Playing an iPod
183
Playing a Bluetooth® device
188
Using the AUX port
194
Using the steering wheel audio switches
198
Audio system settings
201
Using the rear seat entertainment system*
221
*: If equipped
INFORMATION
●The display and button positions will differ depending on the type of the system.
143
LX_Navi_OM60N29U_(U)
15.08.06 12:29
1. BASIC OPERATION
2. SOME BASICS
This section describes some of the basic
features of the audio/visual system.
Some information may not pertain to
your system.
Your audio/visual system works when
the engine switch is in ACCESSORY or
IGNITION ON mode.
TURNING THE SYSTEM ON
AND OFF
NOTICE
●To prevent the battery from being discharged, do not leave the audio/visual
system on longer than necessary when
the engine is not running.
CERTIFICATION
CAUTION:
 Laser products
• USE
OF
CONTROL
OR
ADJUSTMENT
OR
PERFORMANCE
OF
PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY
RESULT
IN
HAZARDOUS
RADIATION EXPOSURE.
• THE
USE
OF
OPTICAL
INSTRUMENTS
WITH
THIS
PRODUCT WILL INCREASE EYE
HAZARD.
“PWR·VOL” knob: Press to turn the audio/
visual system on and off. The system turns
on in the last mode used. Turn this knob to
adjust the volume.
“RADIO”, “MEDIA” button: Press to display screen buttons for the audio/visual system.
 A function that enables automatic return
to the previous screen from the audio/
visual screen can be selected. (P.57)
144
LX_Navi_OM60N29U_(U)
15.08.06 12:29
1. BASIC OPERATION
SELECTING AN AUDIO
SOURCE
1 Display the audio control screen.
(P.142)
Using the instrument panel
2 Each time the “RADIO” or “MEDIA”
button is pressed, the audio source
changes.
From the audio source selection screen
2 Select “Source”.
3 Select the desired source.
INFORMATION
“RADIO” button: To change radio modes.
“MEDIA” button: To change media modes.
145
LX_Navi_OM60N29U_(U)
15.08.06 12:29
4
AUDIO/VISUAL SYSTEM
●Dimmed screen buttons cannot be operated.
●When there are two pages, select “ ” or
“ ” to change the page.
●When “Rear” is selected, the rear seat
entertainment system can be operated
from the front seats. (P.228)
1. BASIC OPERATION
REORDERING THE AUDIO
SOURCE
1 Display the audio control screen.
(P.142)
2 Select “Source”.
3 Select “Reorder”.
4 Select the desired audio source then
DISC SLOT
INSERTING A DISC
1 Insert a disc into the disc slot.
“<<” or “>>” to reorder.
 After insertion, the disc is automatically
loaded.
146
LX_Navi_OM60N29U_(U)
15.08.06 12:29
1. BASIC OPERATION
EJECTING A DISC
1 Press the
button and remove the
disc.
USB/AUX PORT
There are 2 USB ports and an AUX port
on the lower instruments panel.
1 Press the lid.
4
●Never try to disassemble or oil any part of
the DVD player. Do not insert anything
other than a disc into the slot.
2 Open the cover and connect a device.
INFORMATION
●The player is intended for use with 4.7 in.
(12 cm) discs only.
●When inserting a disc, gently insert the
disc with the label facing up.
 Turn on the power of the device if it is not
turned on.
147
LX_Navi_OM60N29U_(U)
15.08.06 12:29
AUDIO/VISUAL SYSTEM
NOTICE
1. BASIC OPERATION
NOTICE
●Depending on the size and shape of the
device that is connected to the system,
the lid may not close fully. In this case, do
not forcibly close the lid as this may damage the device or the terminal, etc.
Connected device
(portable audio
device, etc.)
INFORMATION
●If 2 devices are connected to the USB
ports, depending on the devices, both
may not be able to be recognized by the
system at the same time.
Left Right Ground Video
audio audio
USING A 4-POLE AUX CABLE
To view a video on an iPod video or External video, it is necessary to use a 4pole AUX cable to connect the portable
audio device.
When connecting a portable audio device to the AUX port, use a 4-pole AUX
cable with a plug that matches the exact
layout shown in the illustration.
 When using an iPod video, a cable that has
a 4-pole AUX plug and a USB connector is
necessary. Connect the plug and connector to the AUX and USB ports.
INFORMATION
●If a 4-pole AUX cable with a different layout is used, audio and/or video may not
be output properly.
148
LX_Navi_OM60N29U_(U)
15.08.06 12:29
1. BASIC OPERATION
TONE AND BALANCE
“Sound Settings” SCREEN
1 Display the audio control screen.
(P.142).
2 Select
.
3 Select the desired tab to be set.
Information
Page
Select to set the tone and
balance.
149
Select to set the DSP control.
150
Select to change audio settings.
201
149
LX_Navi_OM60N29U_(U)
15.08.06 12:29
4
AUDIO/VISUAL SYSTEM
No.
TONE:
How good an audio program sounds is
largely determined by the mix of the treble, mid and bass levels. In fact, different
kinds of music and vocal programs usually sound better with different mixes of
treble, mid and bass.
BALANCE:
A good balance of the left and right stereo channels and of the front and rear
sound levels is also important.
Keep in mind that when listening to a stereo recording or broadcast, changing
the right/left balance will increase the
volume of 1 group of sounds while decreasing the volume of another.
1. BASIC OPERATION
1 Select the “Sound” tab and select the
desired item to be set.
DSP CONTROL
1 Select the “DSP” tab and select the desired item to be set.
No.
Function
Select “+” or “-” to adjust highpitched tones.
Select “+” or “-” to adjust mid-pitched
tones.
Select “+” or “-” to adjust low-pitched
tones.
Select to adjust the sound balance
between the front and rear speakers.
No.
Function
The system adjusts to the optimum
volume and tone quality according to
vehicle speed to compensate for increased vehicle noise.
This function can create a feeling of
presence.
Select to adjust the sound balance
between the left and right speakers.
150
LX_Navi_OM60N29U_(U)
15.08.06 12:29
1. BASIC OPERATION
AUDIO SCREEN
ADJUSTMENT
SCREEN SIZE SETTINGS
The screen size can be selected for each
type of media.
DVD video/iPod video/External video
1 Display the audio control screen.
2 Select “Options”.
3 Select “Wide”.
4 Select the desired item to be adjusted.
No.
The brightness, contrast, color and tone
of the screen can be adjusted.
DVD video/iPod video/External video
1 Display the audio control screen.
(P.142)
4
2 Select “Options”.
3 Select “Display”.
AUDIO/VISUAL SYSTEM
(P.142)
CONTRAST, BRIGHTNESS,
COLOR AND TONE
ADJUSTMENT
Function
Select to display a 4 : 3 screen, with
either side in black.
Select to enlarge the image horizontally and vertically to full screen.
Select to enlarge the image by the
same ratio horizontally and vertically.
151
LX_Navi_OM60N29U_(U)
15.08.06 12:29
1. BASIC OPERATION
4 Select the desired item to be adjusted.
Screen button
Function
“Color” “R”
Select to strengthen the
red color of the screen.
“Color” “G”
Select to strengthen the
green color of the
screen.
“Tone” “+”
Select to strengthen the
tone of the screen.
“Tone” “-”
Select to weaken the
tone of the screen.
“Contrast” “+”
Select to strengthen the
contrast of the screen.
“Contrast” “-”
Select to weaken the
contrast of the screen.
“Brightness” “+”
Select to brighten the
screen.
“Brightness” “-”
Select to darken the
screen.
VOICE COMMAND SYSTEM
1 Press this switch to operate the voice
command system.
 The voice command system and its list of
commands can be operated. (P.258)
INFORMATION
●Depending on the audio source, some
functions may not be available.
152
LX_Navi_OM60N29U_(U)
15.08.06 12:29
2. RADIO OPERATION
1. AM/FM RADIO
OVERVIEW
To display operation screen, please see the following page: P.145
■ CONTROL SCREEN
4
AUDIO/VISUAL SYSTEM
When “Options” is selected
153
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. RADIO OPERATION
■ CONTROL PANEL
No.
Function
Select to display HD) multicast channels available. (P.160)
Select to display the cache radio operation buttons. (P.157)
Select to display the radio preset buttons. (P.156)
Select to display a list of receivable stations. (P.157)
Select to store artist and song title information. (P.161)
 Select to scan for receivable stations.
 When a program type is selected: Select to scan for receivable stations of the selected
program type/channel category.
Select to change the screen buttons (at the bottom of the screen) to the optional screen
buttons.
Select to seek a receivable station of the selected category.
Select to display the “Type List” screen. (P.159)
Select to display text messages.
Analog FM only: Select to display RBDS text messages. (P.159)
154
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. RADIO OPERATION
No.
Function
Select to turn HD Radio mode on/off.
When the “HD Radio” indicator is off, the station list shows only analog broadcasts.
Select to change the screen buttons (at the bottom of the screen) back to the standard
screen buttons.
 Press to select a preset station.
 Press and hold to seek for a station.
Cache radio only: Press to turn mute on/off.
4
INFORMATION
●The radio automatically changes to stereo reception when a stereo broadcast is received.
155
LX_Navi_OM60N29U_(U)
15.07.30 20:43
AUDIO/VISUAL SYSTEM
 Turn to step up/down frequencies.
 Turn to move up/down the list.
2. RADIO OPERATION
PRESET BUTTON SCREEN
Two preset button screens are available:
the “Mixed Presets” screen and “Individual Presets” screen.
On the “Mixed Presets” screen, preset
stations for all radio modes (AM, FM
and XM Satellite Radio modes) are displayed together.
On the “Individual Presets” screen, only
preset stations for the current radio
mode are displayed.
1 Select “Presets”.
2 Select the desired item.
INFORMATION
●On the “Mixed Presets” screen, up to 36
stations (6 stations per page x 6 pages)
can be set as presets.
On the “Individual Presets” screen, up to
another 12 AM stations, 12 FM stations,
and 12 XM Satellite Radio stations can be
set as presets. (Maximum 72 stations)
PRESETTING A STATION
1 Tune in the desired station.
2 Select “Presets”.
3 Select “add new”.
 To change the preset station to a different
one, select and hold the preset station.
4 Select “Yes” on the confirmation screen.
5 Select “OK” after setting the new preset
station.
INFORMATION
No.
Function
Select to tune in to the desired preset station/channel.
●The number of preset radio stations displayed on the screen can be changed.
(P.203)
Select to change to the “Individual
Presets” screen. (On the “Individual
Presets” screen, select “Mixed Presets” to change to the “Mixed Presets” screen.
Select to display the control screen.
156
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. RADIO OPERATION
SELECTING A STATION FROM
THE LIST
1 Select “Station List”.
2 FM radio only: Select the desired pro-
CACHING A RADIO
PROGRAM
A radio program can be cached and
played back in a time-shifted manner.
gram type.
3 Select the desired station.
“Info”: Select to display the control screen.
■ REFRESHING THE STATION LIST
screen and the following screen will be
displayed.
“Cancel Refresh”: Select to cancel the refresh.
“Source”: Select to change to another audio source while refreshing.
The broadcast cached in the program
cache can be played back manually.
1 Select
on the right side of the screen.
INFORMATION
●The audio system sound is muted during
refresh operation.
●In some situations, it may take some time
to update the station list.
157
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4
AUDIO/VISUAL SYSTEM
1 Select “Refresh” on the “Station List”
PLAYING BACK THE CACHE
MANUALLY
2. RADIO OPERATION
2 Select the desired cache radio operation button.
AUTOMATIC PLAYBACK OF
THE CACHE
If the radio broadcast is interrupted by
another audio output, such as an
incoming phone call, the system will
automatically cache the interrupted
portion and perform time-shift playback
when the interruption ends. To manually
operate the cache operation: (P.157)
No.
Function
Select: Skips backward 2 minutes
Select and hold: Fast rewinds continuously
Returns to the live radio broadcast
Pauses the playback (To restart, select
)
Select: Skips forward 2 minutes
Select and hold: Fast forwards continuously
INFORMATION
●The system can store up to 10 minutes.
Cached data will be erased when the
radio mode or station is changed or when
the audio system is turned off.
●If noise or silence occurs during the caching process, cache writing will continue,
with the noise or silence recorded as is. In
this case, the cached broadcast will contain the noise or silence when played
back.
Hides the cache operation buttons
Red vertical bar: Shows what portion
of the cached broadcast is currently
playing
Light blue bar: Shows time in which
cache writing is in progress
158
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. RADIO OPERATION
RADIO BROADCAST DATA
SYSTEM
SELECTING A DESIRED
PROGRAM TYPE
1 Select “Options”.
2 Select “Type”.
3 Select to select a program type/channel
4 Select “TYPE SEEK” and the system
will start to seek for stations in the relevant program type/channel category.
INFORMATION
●If no relevant program can be found, “no
type” will appear on the screen.
category.
159
LX_Navi_OM60N29U_(U)
15.07.30 20:43
AUDIO/VISUAL SYSTEM
This audio system is equipped with Radio Broadcast Data Systems (RBDS).
RBDS mode allows text messages to be
received from radio stations that utilize
RBDS transmitters.
When RBDS is on, the radio can
— only select stations of a particular program type,
— display messages from radio stations,
— search for a stronger signal station.
RBDS features are available only when
listening to an FM station that
broadcasts RBDS information and the
“FM Info” indicator is on.
 Once a program type has been set, “TYPE
SEEK” will appear on the screen.
 The program list is in the following order:
• “Classical”
• “Country”
• “EasyLis” (Easy Listening)
• “Inform” (Information)
• “Jazz”
• “News”
• “Oldies”
4
• “Other”
• “Pop Music”
• “Religion”
• “Rock”
• “R&B” (Rhythm and Blues)
• “Sports”
• “Talk”
• “Traffic” (Not available when “HD Radio”
indicator is off.)
• “Alert” (Emergency Alert)
2. RADIO OPERATION
USING HD Radio™
TECHNOLOGY
HD Radio™ Technology is the digital
evolution of analog AM/FM radio. Your
radio product has a special receiver
which allows it to receive digital broadcasts (where available) in addition to the
analog broadcasts it already receives.
Digital broadcasts have better sound
quality than analog broadcasts as digital
broadcasts provide free, crystal clear
audio with no static or distortion. For
more information, and a guide to available radio stations and programming,
refer to www.hdradio.com.
HD Radio features included in Lexus
radios:
 Digital Sound  HD Radio broadcasts
deliver crystal-clear, digital audio quality
to listeners.
 HD2/HD3 Channels  FM stations can
provide additional digital only audio programming with expanded content and
format choices on HD2/HD3 channels.
 PSD  Program Service Data (PSD)
gives you on-screen information such as
artist name and song title.
 iTunes Tagging  Listeners can tag
(store) songs they like for later review and
purchase through iTunes.
 Artist Experience  Images related to
the broadcast are displayed on the radio
screen, such as album cover art and station logos.
HD Radio Technology manufactured
under license from iBiquity Digital
Corporation. U.S. and Foreign Patents.
HD Radio™ and the HD, HD Radio, and
“Arc” logos are proprietary trademarks
of iBiquity Digital Corp.
AVAILABLE HD Radio™
TECHNOLOGY
MULTICAST
On the FM radio frequency most digital
stations have “multiple” or supplemental
programs on one FM station.
1 Select the “HD)” logo.
2 Select the desired channel.
 Turning the “TUNE·SCROLL” knob can
also select the desired multicast channel.
160
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. RADIO OPERATION
PRESERVING A MUSIC
INFORMATION
Tag information in the music broadcasting is preserved in the system and transmits to an iPod.
1 Select “Tag” to bookmark the music information.
2 Connect an iPod. (P.147)
●The tag information can not be preserved
while scanning or caching the radio station.
●If tagging the music information fails,
“Saving the HD Radio tag failed.” will be
displayed on the screen. If this occurs, tag
the information again.
●HD Radio™ stations can be preset.
●An orange “HD)” logo indicator will be
displayed on the screen when in digital.
The “HD)” logo will first appear in a gray
color indicating the station is indeed (an
analog and) a digital station. Once the
digital signal is acquired, the logo will
change to a bright orange color.
●The song title, artist name and music
genre will appear on the screen when
available by the radio station. In addition,
radios stations may send album cover
pictures when available.
●As a user works through the analog radio
stations, (where applicable) the radio
receiver will automatically tune from an
analog signal to a digital signal within 5
seconds.
161
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4
AUDIO/VISUAL SYSTEM
 Turn on the power of the iPod if it is not
turned on.
 Once an iPod is connected, the music tag
moves from the radio into the iPod.
 When the iPod is connected to iTunes, the
“tagged” information of the songs which
were tagged while listening to the radio can
be viewed. Then a user may decide to purchase the song or CD/Album which had
been listened to on their radio.
INFORMATION
2. RADIO OPERATION
TROUBLESHOOTING GUIDE
Experience
Cause
Action
Mismatch of time alignment- a user may hear a
short period of programming replayed or an echo,
stutter or skip.
The radio stations analog
and digital volume is not
properly aligned or the station is in ballgame mode.
None, radio broadcast issue. A
user can contact the radio station.
Sound fades, blending in
and out.
Radio is shifting between
analog and digital audio.
Reception issue, may clear-up as
the vehicle continues to be driven.
Turning the indicator of the “HD
Radio” button off can force radio in
an analog audio.
Audio mute condition
when an HD2/HD3 multicast channel had been playing.
The radio does not have access to digital signals at the
moment.
This is normal behavior, wait until
the digital signal returns. If out of
the coverage area, seek a new station.
Audio mute delay when selecting an HD2/HD3 multicast channel preset.
The digital multicast content is not available until HD
Radio™ broadcast can be
decoded and make the audio available. This takes up
to 7 seconds.
This is normal behavior, wait for the
audio to become available.
Text information does not
match the present song audio.
Data service issue by the
radio broadcaster.
Broadcaster should be notified.
Complete the form;
www.ibiquity.com/automotive/
report_radio_station_experiences.
No text information shown
for the present selected frequency.
Data service issue by the
radio broadcaster.
Broadcaster should be notified.
Complete the form;
www.ibiquity.com/automotive/
report_radio_station_experiences.
162
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. RADIO OPERATION
2. XM Satellite Radio
OVERVIEW
To display operation screen, please see the following page: P.145
■ CONTROL SCREEN
4
AUDIO/VISUAL SYSTEM
■ CONTROL PANEL
163
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. RADIO OPERATION
No.
Function
Select to display the radio preset buttons. (P.156)
Select to display a receivable channel list. (P.167)
Select to scan for receivable channels of the selected program type/channel category.
Select to display the “Type List” screen. (P.159)
Select to display text messages.
 Press to select a preset channel.
 Press and hold to seek for a channel.
 Turn to step up/down channels.
 Turn to move up/down the list.
164
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. RADIO OPERATION
HOW TO SUBSCRIBE TO AN
XM Satellite Radio
HOW TO SUBSCRIBE
It is necessary to enter into a separate
service agreement with XM Satellite
Radio in order to receive satellite broadcast programming in the vehicle. Additional
activation
and
service
subscription fees apply that are not included in the purchase price of the vehicle and digital satellite tuner.
●XM Radio Services Legal Disclaimers
and Warnings
• Fees and Taxes  Subscription fee,
taxes, one time activation fee, and other
fees may apply. Subscription fee is consumer only. All fees and programming
subject to change.
Subscriptions subject to Customer
Agreement available at
www.siriusxm.com (U.S.A.) or
www.siriusxm.ca (Canada) XM service
only available in the 48 contiguous
United States and Canada.
Explicit Language Notice Channels
with frequent explicit language are indicated with an “XL” preceding the channel name. Channel blocking is available
for XM Satellite Radio receivers by
notifying XM at;
U.S.A. Customers:
Visit www.siriusxm.com or calling
1-877-447-0011
Canadian Customers:
Visit www.siriusxm.ca or calling
1-877-438-9677
 For complete information on subscription rates and terms, or to subscribe to
XM Satellite Radio:
 U.S.A.
Refer to www.siriusxm.com or call
1-877-447-0011.
Canada
Refer to www.siriusxm.ca or call
1-877-438-9677.
165
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4
AUDIO/VISUAL SYSTEM
To listen to a satellite radio broadcast in
the vehicle, a subscription to the XM
Satellite Radio service is necessary.
An XM Satellite Radio is a tuner designed exclusively to receive broadcasts
provided under a separate subscription.
Availability is limited to the 48 contiguous U.S. states and some Canadian
provinces.
NOTICE
2. RADIO OPERATION
NOTICE
●It is prohibited to copy, decompile, disassemble, reverse engineer, hack, manipulate, or otherwise make available any
technology or software incorporated in
receivers compatible with the XM Satellite Radio System or that support the XM
website, the Online Service or any of its
content. Furthermore, the AMBE® voice
compression software included in this
product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice
Systems, Inc.
●Note: this applies to XM receivers only
and not XM Ready devices.
INFORMATION
●XM Radio Services Descriptions
• Radio and Entertainment
XM offers more than 170 satellite radio
channels of commercial-free music and
premier sports, news, talk, and entertainment. XM is broadcast via satellites
to millions of listeners across the continental United States. XM subscribers
listen to XM on satellite radio receivers
for the car, home, and portable use.
More information about XM is available
online at www.siriusxm.com (U.S.A.) or
www.siriusxm.ca (Canada).
INFORMATION
●XM Radio Services  Subscription
Instructions
• For XM Services requiring a
subscription (such as XM Radio, and
some Infotainment & data services), the
following paragraph shall be included.
Required XM Radio and some
Infotainment & data services monthly
subscriptions sold separately after trial
period. Subscription fee is consumer
only. All fees and programming subject
to change. Subscriptions are subject to
the Customer Agreement available at
www.siriusxm.com
(U.S.A.)
or
www.siriusxm.ca (Canada) XM service
only available in the 48 contiguous
United States and 10 Canadian
provinces.  2011 Sirius XM Radio Inc.
Sirius, XM and all related marks and
logos are trademarks of Sirius XM
Radio Inc. All other marks, channel
names and logos are the property of
their respective owners.
For more information, program
schedules, and to subscribe or extend
subscription after complimentary trial
period; more information is available at:
U.S.A. Customers:
Visit www.siriusxm.com or call 1-877447-0011
Canadian Customers:
Visit www.siriusxm.ca or call 1-877438-9677
166
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. RADIO OPERATION
INFORMATION
SATELLITE TUNER
TECHNOLOGY NOTICE
Lexus’s satellite radio tuners are awarded Type Approval Certificates from XM
Satellite Radio Inc. as proof of compatibility with the services offered by XM
Satellite Radio.
Each XM tuner is identified with a
unique radio ID. The radio ID is required
when activating an XM service or when
reporting a problem.
 If “Ch 000” is selected using the
“TUNE·SCROLL” knob, the ID code,
which is 8 alphanumeric characters, will be
displayed. If another channel is selected, 4
the ID code will no longer be displayed.
The channel (000) alternates between displaying the radio ID and the specific radio
code.
AUDIO/VISUAL SYSTEM
●XM Satellite Radio is solely responsible
for the quality, availability and content of
the satellite radio services provided,
which are subject to the terms and conditions of the XM Satellite Radio customer
service agreement.
●Customers should have their radio ID
ready; the radio ID can be found by tuning to “Ch 000” on the radio. For details,
see “DISPLAYING THE RADIO ID”
below.
●All fees and programming are the
responsibility of XM Satellite Radio and
are subject to change.
DISPLAYING THE RADIO ID
SELECTING A CHANNEL
FROM THE LIST
1 Select “Channel List”.
2 Select the desired channel category.
3 Select the desired channel.
“Info”: Select to display the control screen.
INFORMATION
●Satellite tuner
The tuner supports only Audio Services
(Music and Talk) and the accompanying
Text Information of XM® Satellite Radio.
●Infotainment and Data services XM
offers a variety of advanced Infotainment
and data services.
167
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. RADIO OPERATION
IF THE SATELLITE RADIO TUNER MALFUNCTIONS
When problems occur with the XM tuner, a message will appear on the screen. Referring to the table below to identify the problem, take the suggested corrective action.
Message
“Ck Antenna”
“Ch Unauth”
Explanation
The XM antenna is not connected. Check whether the XM antenna
cable is attached securely.
A short circuit occurs in the antenna or the surrounding antenna cable. See a Lexus certified dealer for assistance.
You have not subscribed to XM Satellite Radio. The radio is being
updated with the latest encryption code. Contact XM Satellite Radio
for subscription information. When a contract is canceled, you can
choose “Ch 000” and all free-to-air channels.
The premium channel you selected is not authorized. Wait for about
2 seconds until the radio returns to the previous channel or “Ch 001”.
If it does not change automatically, select another channel. To listen
to the premium channel, contact XM Satellite Radio.
“No Signal”
The XM signal is too weak at the current location. Wait until your vehicle reaches a location with a stronger signal.
“Loading...”
The unit is acquiring audio or program information. Wait until the unit
has received the information.
“Ch Off Air”
The channel you selected is not broadcasting any programming. Select another channel.
-----
There is no song/program title or artist name/feature associated with
the channel at that time. No action is required.
“Ch Unavail”
The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to the previous channel or “Ch 001”. If it
does not change automatically, select another channel.
168
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. RADIO OPERATION
INFORMATION
●Contact the XM Listener Care Center at 1-877-447-0011 (U.S.A.) or 1-877-438-9677
(Canada).
4
AUDIO/VISUAL SYSTEM
169
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. RADIO OPERATION
3. INTERNET RADIO
LISTENING TO INTERNET
RADIO
One of LEXUS App Suite’s features is
the ability to listen to internet radio. In order to use this service, a compatible
phone and the system needs to be set
up. For details: P.332
1 Display the audio source selection
screen. (P.145)
2 Select the desired application screen
button.
 The internet radio application screen is displayed.
 Perform operations according to the displayed application screen.
 For the instrument panel operation method
and the Remote Touch operation method:
P.145
 By pressing the “RADIO” button, the
“Audio” screen can be returned to.
INFORMATION
●Other applications can be activated
while listening to internet radio.
●An iPhone cannot be connected via
Bluetooth® and USB connection at the
same time. However, it is possible to
recharge an iPhone while using applications by connecting via USB. The system
uses the connection method that was
used last. Therefore, if connected via
USB after Bluetooth® connection, it is
necessary to reconnect the iPhone via
Bluetooth®.
●Some parts of applications can be
adjusted using the switches on the steering wheel.
●For additional information, refer to
http://www.lexus.com/enform/ or call
1-800-255-3987.
170
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
1. CD
OVERVIEW
To display operation screen, please see the following page: P.145
Inserting a disc (P.146)
■ CONTROL SCREEN
Audio CD
4
AUDIO/VISUAL SYSTEM
MP3/WMA/AAC disc
■ CONTROL PANEL
171
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
No.
Function
 Displays cover art
 Select to display a track/file list.
 Audio CD: Select to display a track list.
 MP3/WMA/AAC disc: Select to display a folder list. To return to the top screen, select
“Now Playing” on the list screen.
Select to set random playback. (P.173)
Select to set repeat playback. (P.173)
 Select to select a track/file.
 Select and hold to fast forward.
Select to play/pause.
 Select to select a track/file.
 Select and hold to rewind.
Select to select a folder.
 Press to select a track/file.
 Press and hold to fast forward/rewind.
Press to play/pause.
 Turn to select a track/file.
 Turn to move up/down the list.
INFORMATION
●If a disc contains CD-DA files and MP3/WMA/AAC files, only the CD-DA files can be
played back.
●If a CD-TEXT disc is inserted, the title of the disc and track will be displayed. Up to 32 characters can be displayed.
172
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
REPEATING
RANDOM ORDER
The track/file or folder currently being
listened to can be repeated.
Tracks/files or folders can be automatically and randomly selected.
1 Select
1 Select
.
.
 Each time
is selected, the mode
changes as follows:
 Each time
is selected, the mode
changes as follows:
Audio CD
Audio CD
• track repeat  off
• file repeat  folder repeat  off*1
• file repeat  off*2
1
* : When random playback is off
*2: When random playback is on
MP3/WMA/AAC disc
AUDIO/VISUAL SYSTEM
MP3/WMA/AAC disc
4
• random (1 disc random)  off
• random (1 folder random) 
folder random (1 disc random)  off
173
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
2. DVD
For safety reasons, the DVD video discs can only be viewed when the following conditions are met:
(a) The vehicle is completely stopped.
(b) The engine switch is in ACCESSORY or IGNITION ON mode.
(c) The parking brake is applied.
While driving in DVD video mode, only the DVD’s audio can be heard.
The playback condition of some DVD discs may be determined by the DVD software
producer. This DVD player plays a disc as the software producer intended. As such,
some functions may not work properly. Be sure to read the instruction manual that
comes with the individual DVD disc. (P.208)
OVERVIEW
To display operation screen, please see the following page: P.145
Inserting a disc (P.146)
■ CONTROL SCREEN
174
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
■ CONTROL PANEL
4
AUDIO/VISUAL SYSTEM
No.
Function
Select to display the menu control key.
Select to display expanded screen video.
 Select to select a chapter.
 During playback: Select and hold to fast forward.
 During a pause: Select and hold to slow forward.
Select to play/pause.
Select to stop the video screen.
 Select to select a chapter.
 Select and hold to rewind.
Select to display the option screen. (P.177)
Select to display the menu screen.
Select to display the password input screen.
 Press to select a chapter.
 Press and hold to fast forward/rewind.
Press to play/pause.
Turn to select a chapter.
175
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
WARNING
●Conversational speech on some DVDs is recorded at a low volume to emphasize the
impact of sound effects. If you adjust the volume assuming that the conversations represent
the maximum volume level that the DVD will play, you may be startled by louder sound
effects or when you change to a different audio source. The louder sounds may have a significant impact on the human body or pose a driving hazard. Keep this in mind when you
adjust the volume.
INFORMATION
●According to the DVD disc, some menu items can be selected directly. (For details, see the
manual that comes with the DVD disc provided separately.)
●If appears on the screen when a control is selected, the operation relevant to the control
is not permitted.
176
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
SEARCHING BY TITLE
DVD OPTIONS
1 Select “Search”.
2 Enter the title number and select “OK”.
1 Select “Options”.
2 The following screen is displayed.
 The player starts playing video for that title
number.
CHANGING THE AUDIO
LANGUAGE
4
No.
Function
Page
Select to display the title
search screen.
177
Select to display the predetermined scene on the
screen and start playing.

Select to display the audio
selection screen.
177
Select to display the subtitle
selection screen.
178
Select to display the angle
selection screen.
178
Select to change the screen
size.
151
Select to display the image
quality adjustment screen.
151
dio language is changed.
 The languages available are restricted to
those available on the DVD disc.
177
LX_Navi_OM60N29U_(U)
15.07.30 20:43
AUDIO/VISUAL SYSTEM
1 Select “Audio”.
2 Each time “Change” is selected, the au-
3. MEDIA OPERATION
CHANGING THE SUBTITLE
LANGUAGE
1 Select “Subtitle”.
2 Each time “Change” is selected, the language the subtitles are displayed in is
changed.
 The languages available are restricted to
those available on the DVD disc.
 When “Hide” is selected, the subtitles can
be hidden.
CHANGING THE ANGLE
The angle can be selected for discs that
are multi-angle compatible when the angle mark appears on the screen.
1 Select “Angle”.
2 Each time “Change” is selected, the angle is changed.
 The angles available are restricted to those
available on the DVD disc.
178
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
3. USB MEMORY
OVERVIEW
To display operation screen, please see the following page: P.145
Connecting a USB memory (P.147)
■ CONTROL SCREEN
4
AUDIO/VISUAL SYSTEM
■ CONTROL PANEL
179
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
No.
Function
 Displays cover art
 Select to display a file/track list.
To return to the top screen, select “Now Playing” on the list screen.
Select to display the play mode selection screen.
To return to the top screen, select “Now Playing” on the list screen.
Select to set random playback. (P.182)
Select to set repeat playback. (P.182)
 Select to select a file/track.
 Select and hold to fast forward.
Select to play/pause.
 Select to select a file/track.
 Select and hold to rewind.
Select to select a folder/album.
 Press to select a file/track.
 Press and hold to fast forward/rewind.
Press to play/pause.
 Turn to select a file/track.
 Turn to move up/down the list.
180
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
WARNING
●Do not operate the player’s controls or connect the USB memory while driving.
NOTICE
INFORMATION
●If tag information exists, the file/folder names will be changed to track/album names.
181
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4
AUDIO/VISUAL SYSTEM
●Depending on the size and shape of the USB memory that is connected to the system, the
lid may not close fully. In this case, do not forcibly close the lid as this may damage the USB
memory or the terminal, etc.
●Do not leave your portable player in the car. In particular, high temperatures inside the vehicle may damage the portable player.
●Do not push down on or apply unnecessary pressure to the portable player while it is connected as this may damage the portable player or its terminal.
●Do not insert foreign objects into the port as this may damage the portable player or its terminal.
3. MEDIA OPERATION
REPEATING
RANDOM ORDER
The file/track or folder/album currently
being listened to can be repeated.
Files/tracks or folders/albums can be
automatically and randomly selected.
1 Select
1 Select
.
 Each time
is selected, the mode
changes as follows:
When random playback is off
• file/track repeat  folder/album
repeat  off
.
 Each time
is selected, the mode
changes as follows:
• random (1 folder/album random) 
folder/album random (all folder/album
random)  off
When random playback is on
• file/track repeat  off
182
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
4. iPod
OVERVIEW
To display operation screen, please see the following page: P.145
Connecting an iPod (P.147)
■ CONTROL SCREEN
iPod audio
4
AUDIO/VISUAL SYSTEM
iPod video
■ CONTROL PANEL
183
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
No.
Function
Audio
Video
 Displays cover art
 Select to display a track list.
To return to the top screen, select “Now
Playing” on the list screen.

Select to display the play mode selection
screen.
To return to the top screen, select “Now
Playing” on the list screen.
Select to display the play mode selection
screen.
To return to the top screen, select “Now
Playing” on the list screen.
Select to set random playback. (P.187)

Select to set repeat playback. (P.187)

 Select to select a track.
 Select and hold to fast forward.
 Select to select a file.
 Select and hold to fast forward.
Select to play/pause.
Select to play/pause.
 Select to select a track.
 Select and hold to rewind.
 Select to select a file.
 Select and hold to rewind.

Select to display expanded screen video.

Select to display the option screen.
(P.187)
184
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
No.
Function
Audio
Video
 Press to select a track.
 Press and hold to fast forward/rewind.
 Press to select a file.
 Press and hold to fast forward/rewind.
Press to play/pause.
Press to play/pause.
 Turn to select a track.
 Turn to move up/down the list.
 Turn to select a file.
 Turn to move up/down the list.
4
AUDIO/VISUAL SYSTEM
185
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
WARNING
●Do not operate the player’s controls or connect the iPod while driving.
NOTICE
●Depending on the size and shape of the iPod that is connected to the system, the lid may not
close fully. In this case, do not forcibly close the lid as this may damage the iPod or the terminal, etc.
●Do not leave your portable player in the car. In particular, high temperatures inside the vehicle may damage the portable player.
●Do not push down on or apply unnecessary pressure to the portable player while it is connected as this may damage the portable player or its terminal.
●Do not insert foreign objects into the port as this may damage the portable player or its terminal.
INFORMATION
●The system can only output the sound while driving.
●When an iPod is connected using a genuine iPod cable, the iPod starts charging its battery.
●Depending on the iPod, the video sound may not be able to be heard.
●Depending on the iPod and the songs in the iPod, iPod cover art may be displayed. This
function can be changed to “On” or “Off”. (P.203) It may take time to display iPod cover
art, and the iPod may not be operated while the cover art display is in process.
●When an iPod is connected and the audio source is changed to iPod mode, the iPod will
resume playing from the same point it was last used.
●Depending on the iPod that is connected to the system, certain functions may not be available.
●For viewing videos from an iPod, it is necessary to set “Video Sound Input” to “A/V”.
(P.202)
●If an iPhone is connected via Bluetooth® and USB at the same time, system operation may
become unstable. For known phone compatibility information, refer to
http://www.lexus.com/enform/.
●The system may not function properly if a conversion adapter is used to connect a device.
186
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
iPod AUDIO
iPod VIDEO
REPEATING
The track currently being listened to can
be repeated.
1 Select
To change to iPod video mode, select
“Browse” on the iPod audio screen, then
select the “Videos” tab and select the
desired video file.
iPod VIDEO OPTIONS
.
1 Select “Options”.
2 Select the desired settings to change.
RANDOM ORDER
Tracks or albums can be automatically
and randomly selected.
1 Select
.
 Each time
is selected, the mode
changes as follows:
• track shuffle  album shuffle  off
No.
Function
Page
Select to change the screen
size.
151
Select to display the image
quality adjustment screen.
151
Select to change audio settings.
201
187
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4
AUDIO/VISUAL SYSTEM
 Each time
is selected, the mode
changes as follows:
• track repeat  off
3. MEDIA OPERATION
5. Bluetooth® AUDIO
The Bluetooth® audio system enables users to enjoy listening to music that is played
on a portable player on the vehicle speakers via wireless communication.
This audio system supports Bluetooth®, a wireless data system capable of playing portable audio music without cables. If your device does not support Bluetooth®, the
Bluetooth® audio system will not function.
OVERVIEW
To display operation screen, please see the following page: P.145
Depending on the type of portable player connected, some functions may not be available and/or the screen may look differently than shown in this manual.
Connecting a Bluetooth® audio device (P.193)
■ CONTROL SCREEN
188
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
■ CONTROL PANEL
4
AUDIO/VISUAL SYSTEM
189
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
No.
Function
 Displays cover art
 Select to display a track list.
To return to the top screen, select “Now Playing” on the list screen.
Select to display the portable device connection screen. (P.193)
Select to display the playlist screen.
To return to the top screen, select “Now Playing” on the list screen.
Select to set random playback. (P.193)
Select to set repeat playback. (P.193)
 Select to select a track.
 Select and hold to fast forward.
Select to play/pause.
 Select to select a track.
 Select and hold to rewind.
Select to select an album.
Displays Bluetooth® device condition
 Press to select a track.
 Press and hold to fast forward/rewind.
Press to play/pause.
 Turn to select a track.
 Turn to move up/down the list.
190
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
WARNING
NOTICE
●Do not leave your portable player in the vehicle. In particular, high temperatures inside the
vehicle may damage the portable player.
191
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4
AUDIO/VISUAL SYSTEM
●Do not operate the player’s controls or connect to the Bluetooth® audio system while driving.
●Your audio unit is fitted with Bluetooth® antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter
defibrillators should maintain a reasonable distance between themselves and the
Bluetooth® antennas. The radio waves may affect the operation of such devices.
●Before using Bluetooth® devices, users of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable
cardioverter defibrillators should consult the manufacturer of the device for information
about its operation under the influence of radio waves. Radio waves could have unexpected
effects on the operation of such medical devices.
3. MEDIA OPERATION
INFORMATION
●Depending on the Bluetooth® device that is connected to the system, the music may start
playing when selecting
while it is paused. Conversely, the music may pause when
selecting
while it is playing.
●In the following conditions, the system may not function:
• The Bluetooth® device is turned off.
• The Bluetooth® device is not connected.
• The Bluetooth® device has a low battery.
●It may take time to connect the phone when Bluetooth® audio is being played.
●For operating the portable player, see the instruction manual that comes with it.
●If the Bluetooth® device is disconnected due to poor reception from the Bluetooth® network when the engine switch is in ACCESSORY or IGNITION ON mode, the system
automatically reconnects the portable player.
●If the Bluetooth® device is disconnected on purpose, such as it was turned off, this does not
happen. Reconnect the portable player manually.
●Bluetooth® device information is registered when the Bluetooth® device is connected to
the Bluetooth® audio system. When selling or disposing of the vehicle, remove the
Bluetooth® audio information from the system. (P.62)
●In some situations, sound output via the Bluetooth® audio system may be out of sync with
the connected device or output intermittently.
192
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
CONNECTING A Bluetooth®
DEVICE
To use the Bluetooth® audio system, it is
necessary to register a Bluetooth® device with the system.
Registering an additional device
LISTENING TO Bluetooth®
AUDIO
REPEATING
The track or album currently being listened to can be repeated.
1 Select “Connect” on the Bluetooth®
1 Select
2 For more information: P.47
 Each time
is selected, the mode
changes as follows:
• track repeat  album repeat  off
audio control screen.
1 Select “Connect” on the Bluetooth®
audio control screen.
2 For more information: P.49
4
RANDOM ORDER
Tracks or albums can be automatically
and randomly selected.
1 Select
.
 Each time
is selected, the mode
changes as follows:
• album random  all track random  off
193
LX_Navi_OM60N29U_(U)
15.07.30 20:43
AUDIO/VISUAL SYSTEM
Selecting a registered device
.
3. MEDIA OPERATION
6. AUX
While driving, video will not be displayed. Only sound will be output.
OVERVIEW
To display operation screen, please see the following page: P.145
Connecting a device to the AUX port (P.147)
■ CONTROL SCREEN
When “External” is selected
194
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
■ CONTROL PANEL
4
AUDIO/VISUAL SYSTEM
No.
Function
AUX
External
Select to display the external operation
screen.


Select to display expanded screen video.

Select to display the option screen.
(P.197)

Select to display the aux operation screen.
Press to turn mute on/off.
Press to turn mute on/off.
195
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
WARNING
●Do not connect portable audio device or operate the controls while driving.
NOTICE
●Depending on the size and shape of the portable audio device that is connected to the system, the lid may not close fully. In this case, do not forcibly close the lid as this may damage
the portable audio device or the terminal, etc.
●Do not leave portable audio device in the vehicle. The temperature inside the vehicle may
become high, resulting in damage to the player.
●Do not push down on or apply unnecessary pressure to the portable audio device while it is
connected as this may damage the portable audio device or its terminal.
●Do not insert foreign objects into the port as this may damage the portable audio device or
its terminal.
INFORMATION
●When connecting an external device that does not output an image, select “AUX”. If
“External” is selected, an all-black (blank) screen will be displayed.
●If the source is changed between AUX and External while the system is operating, sound
may not be output momentarily.
196
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. MEDIA OPERATION
EXTERNAL OPTIONS
1 Select “Options”.
2 Select the desired settings to change.
4
Function
Page
Select to change the screen
size.
151
Select to display the image
quality adjustment screen.
151
AUDIO/VISUAL SYSTEM
No.
197
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4. AUDIO/VISUAL REMOTE CONTROLS
1. STEERING SWITCHES
Some parts of the audio/visual system can be adjusted using the switches on the steering wheel.
No.
Switch
Volume control switch
“ ” switch
“MODE” switch
Volume control switch
Mode
All
Operation
Function
Press
Volume up/down
Press and hold
(0.8 sec. or more)
Volume up/down continuously
198
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4. AUDIO/VISUAL REMOTE CONTROLS
“ ” switch
Mode
AM, FM
SAT
MP3/
WMA/AAC
disc
DVD
USB
iPod
Function
Press
Preset station up/down
Press and hold
(0.8 sec. or more)
Seek up/down continuously while the switch is being
pressed
Press
Preset channel up/down
Press and hold
(0.8 sec. or more)
Type seek up/down
Press and hold
(1.5 sec. or more)
Fast up/down
Press
Track up/down
Press and hold
(0.8 sec. or more)
Fast forward/rewind
Press
File up/down
Press and hold
(0.8 sec. or more)
Fast forward/rewind
Press
Chapter up/down
Press and hold
(0.8 sec. or more)
Fast forward/rewind
Press
File/Track up/down
Press and hold
(0.8 sec. or more)
Fast forward/rewind
Press
Track/File up/down
Press and hold
(0.8 sec. or more)
Fast forward/rewind
4
AUDIO/VISUAL SYSTEM
CD
Operation
199
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4. AUDIO/VISUAL REMOTE CONTROLS
Mode
Bluetooth®
audio
Operation
Function
Press
Track up/down
Press and hold
(0.8 sec. or more)
Fast forward/rewind
“MODE” switch
Mode
AM, FM,
SAT, AUX
CD, MP3/
WMA/AAC
disc, DVD,
USB, iPod,
Bluetooth®
audio, APPS
Operation
Function
Press
Change audio modes
Press and hold
(0.8 sec. or more)
Mute
Press
Change audio modes
Press and hold
(0.8 sec. or more)
Pause
INFORMATION
●In the APPS mode, some operation may be done on the screen depend on the selected
APPS.
200
LX_Navi_OM60N29U_(U)
15.07.30 20:43
5. SETUP
1. AUDIO SETTINGS
Detailed audio settings can be programmed.
AUDIO SETTINGS SCREEN
1 Press the “MENU” button on the
Remote Touch.
4
No.
*
Page
Select to set the iPod audio
signal input settings.
202
Select to set the video signal format settings.
202
Select to change the number of preset radio stations
displayed on the screen.
203
Select to set detailed cover
art settings.
203
Select to set detailed DVD
settings.
204
*: Only in DVD video mode
201
LX_Navi_OM60N29U_(U)
15.07.30 20:43
AUDIO/VISUAL SYSTEM
2 Select “Setup”.
3 Select “Audio”.
4 Select the desired item to be set.
Function
5. SETUP
iPod SETTINGS
EXTERNAL VIDEO SETTINGS
1 Display the audio setting screen.
1 Display the audio setting screen.
2 Select “iPod Settings”.
3 Select “Video Sound Input”.
4 Select a screen button for the desired
2 Select “External Video Settings”.
3 Select “Video Signal Switch”.
4 Select a screen button for the desired
(P.201)
setting.
(P.201)
setting.
202
LX_Navi_OM60N29U_(U)
15.07.30 20:43
5. SETUP
SETTING THE NUMBER OF
RADIO PRESETS
1 Display the audio setting screen.
(P.201)
2 Select “Number of Radio Presets”.
3 Select the button with the desired num-
COVER ART SETTINGS
1 Display the audio setting screen.
(P.201)
2 Select “Cover Art Settings”.
3 Select the desired button to be set.
ber to be displayed.
 “Default”: Select to default the settings.
4
Function
Select on/off to set the cover art display in DISC mode.
Select on/off to set the cover art display in USB mode.
Select on/off to set the priority of the
Gracenote database in USB mode.
Select on/off to set the cover art display in iPod mode.
Select on/off to set the priority of the
Gracenote database in iPod mode.
INFORMATION
●Images from the Gracenote database
displayed on the screen may be different
from the actual cover art.
203
LX_Navi_OM60N29U_(U)
15.07.30 20:43
AUDIO/VISUAL SYSTEM
No.
5. SETUP
DVD SETTINGS
Function
Page
1 Display the audio setting screen.
Select to change the audio
language.
205
2 Select “DVD Settings”.
3 Select the items to be set.
Select to change the subtitle language.
205
Select to change the language of the DVD video
menu.
205
Select to set the angle mark
on/off.

Select to set the parental
lock.
205
Select to set the auto start
playback on/off.
Discs that are inserted
while the vehicle is in motion will automatically start
playing. Certain discs may
not play.

Select to set a dynamic
range.
205
Select to initialize all menus.

(P.201)
No.
204
LX_Navi_OM60N29U_(U)
15.07.30 20:43
5. SETUP
■ AUDIO LANGUAGE
■ PARENTAL LOCK
1 Select “Audio Language”.
2 Select the desired language to be
1 Select “Parental Lock”.
2 Enter the 4-digit personal code.
3 Select a parental level (1-8).
heard.
 If the desired language to be heard cannot
be found on this screen, select “Other” and
enter a language code. (P.206)
■ SUBTITLE LANGUAGE
 If the desired language to be read cannot
be found on this screen, select “Other” and
enter a language code. (P.206)
The difference between the lowest volume and the highest volume can be adjusted.
1 Select “Dynamic Range”.
2 Select “MAX”, “STD” or “MIN”.
■ MENU LANGUAGE
1 Select “Menu Language”.
2 Select the desired language to be read.
 If the desired language to be read cannot
be found on this screen, select “Other” and
enter a language code. (P.206)
205
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4
AUDIO/VISUAL SYSTEM
1 Select “Subtitle Language”.
2 Select the desired language to be read.
■ SOUND DYNAMIC RANGE
5. SETUP
LANGUAGE CODES LIST
Code
Language
Code
Language
0514
English
0515
Esperanto
Code
Language
1214
Lingala
Code
Language
1913
Samoan
1001
Japanese
0520
Estonian
1215
Laotian
1914
Shona
0618
French
0521
Basque
1220
Lithuanian
1915
Somali
0405
German
0601
Persian
1222
Latvian, Lettish
1917
Albanian
0920
Italian
0609
Finnish
1307
Malagasy
1918
Serbian
0519
Spanish
0610
Fiji
1309
Maori
1919
Siswati
2608
Chinese
0615
Faroese
1311
Macedonian
1920
Sesotho
1412
Dutch
0625
Frisian
1312
Malayalam
1921
Sundanese
1620
Portuguese
0701
Irish
1314
Mongolian
1923
Swahili
1922
Swedish
0704
Scottish-Gaelic
1315
Moldavian
2001
Tamil
1821
Russian
0712
Galician
1318
Marathi
2005
Telugu
1115
Korean
0714
Guarani
1319
Malay
2007
Tajik
0512
Greek
0721
Gujarati
1320
Maltese
2008
Thai
0101
Afar
0801
Hausa
1325
Burmese
2009
Tigrinya
0102
Abkhazian
0809
Hindi
1401
Nauru
2011
Turkmen
0106
Afrikaans
0818
Croatian
1405
Nepali
2012
Tagalog
0113
Amharic
0821
Hungarian
1415
Norwegian
2014
Setswana
0118
Arabic
0825
Armenian
1503
Occitan
2015
Tongan
0119
Assamese
0901
Interlingua
1513
(Afan) Oromo
2018
Turkish
0125
Aymara
0905
Interlingue
1518
Oriya
2019
Tsonga
0126
Azerbaijani
0911
Inupiak
1601
Punjabi
2020
Tatar
2023
Twi
0201
Bashkir
0914
Indonesian
1612
Polish
0205
Byelorussian
0919
Icelandic
1619
Pashto, Pushto
2111
Ukrainian
0207
Bulgarian
0923
Hebrew
1721
Quechua
2118
Urdu
0208
Bihari
1009
Yiddish
1813
Rhaeto-Romance
2126
Uzbek
0209
Bislama
1023
Javanese
1814
Kirundi
2209
Vietnamese
0214
Bengali, Bangla
1101
Georgian
1815
Romanian
2215
Volapük
0215
Tibetan
1111
Kazakh
1823
Kinyarwanda
2315
Wolof
0218
Breton
1112
Greenlandic
1901
Sanskrit
2408
Xhosa
0301
Catalan
1113
Cambodian
1904
Sindhi
2515
Yoruba
0315
Corsican
1114
Kannada
1907
Sango
2621
Zulu
0319
Czech
1119
Kashmiri
1908
Serbo-Croatian
0325
Welsh
1121
Kurdish
1909
Sinhalese
0401
Danish
1125
Kirghiz
1911
Slovak
0426
Bhutani
1201
Latin
1912
Slovenian
206
LX_Navi_OM60N29U_(U)
15.07.30 20:43
6. TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
1. OPERATING INFORMATION
NOTICE
●To avoid damage to the audio/visual system:
• Be careful not to spill beverages over
the audio/visual system.
• Do not put anything other than an
appropriate disc into the disc slot.
INFORMATION
RADIO
Usually, a problem with radio reception
does not mean there is a problem with
the radio — it is just the normal result of
conditions outside the vehicle.
For example, nearby buildings and terrain can interfere with FM reception.
Power lines or phone wires can interfere
with AM signals. And of course, radio
signals have a limited range. The farther
the vehicle is from a station, the weaker
its signal will be. In addition, reception
conditions change constantly as the vehicle moves.
Here, some common reception problems that probably do not indicate a
problem with the radio are described.
Fading and drifting stations: Generally, the
effective range of FM is about 25 miles (40
km). Once outside this range, you may notice fading and drifting, which increase with
the distance from the radio transmitter.
They are often accompanied by distortion.
Multi-path: FM signals are reflective, making it possible for 2 signals to reach the vehicle’s antenna at the same time. If this 4
happens, the signals will cancel each other
out, causing a momentary flutter or loss of
reception.
Static and fluttering: These occur when signals are blocked by buildings, trees or other
large objects. Increasing the bass level may
reduce static and fluttering.
Station swapping: If the FM signal being listened to is interrupted or weakened, and
there is another strong station nearby on
the FM band, the radio may tune in the second station until the original signal can be
picked up again.
AUDIO/VISUAL SYSTEM
●The use of a cellular phone inside or near
the vehicle may cause a noise from the
speakers of the audio/visual system which
you are listening to. However, this does
not indicate a malfunction.
FM
207
LX_Navi_OM60N29U_(U)
15.07.30 20:43
6. TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
AM
Fading: AM broadcasts are reflected by the
upper atmosphere — especially at night.
These reflected signals can interfere with
those received directly from the radio station, causing the radio station to sound alternately strong and weak.
Station interference: When a reflected signal and a signal received directly from a radio station are very nearly the same
frequency, they can interfere with each other, making it difficult to hear the broadcast.
Static: AM is easily affected by external
sources of electrical noise, such as high tension power lines, lightening or electrical
motors. This results in static.
XM
 Cargo loaded on the roof luggage carrier,
especially metal objects, may adversely
affect the reception of XM Satellite Radio.
 Alternation or modifications carried out
without appropriate authorization may
invalidate the user’s right to operate the
equipment.
DVD PLAYER AND DISC
 This DVD player is intended for use with
4.7 in. (12 cm). discs only.
 Extremely high temperatures can keep the
DVD player from working. On hot days,
use the air conditioning system to cool the
inside of the vehicle before using the player.
 Bumpy roads or other vibrations may make
the DVD player skip.
 If moisture gets into the DVD player, the
discs may not be able to be played. Remove
the discs from the player and wait until it
dries.
WARNING
●The DVD player uses an invisible laser
beam which could cause hazardous radiation exposure if directed outside the
unit. Be sure to operate the player correctly.
208
LX_Navi_OM60N29U_(U)
15.07.30 20:43
6. TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
DVD PLAYER
Special shaped discs
Audio CDs
DVD video
discs
4
Transparent/translucent discs
AUDIO/VISUAL SYSTEM
DVD-R/RW
discs
 Use only discs marked as shown above.
The following products may not be playable
on your player:
• SACD
• dts CD
• Copy-protected CD
• DVD-Audio
• Video CD
• DVD-RAM
Low quality discs
209
LX_Navi_OM60N29U_(U)
15.07.30 20:43
6. TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
Labeled discs
Correct
NOTICE
●Do not use special shaped, transparent/
translucent, low quality or labeled discs
such as those shown in the illustrations.
The use of such discs may damage the
player, or it may be impossible to eject the
disc.
●This system is not designed for use of
Dual Discs. Do not use Dual Discs
because they may cause damage to the
player.
●Do not use discs with a protection ring.
The use of such discs may damage the
player, or it may be impossible to eject the
disc.
●Do not use printable discs. The use of
such discs may damage the player, or it
may be impossible to eject the disc.
Wrong
 Handle discs carefully, especially when
inserting them. Hold them on the edge and
do not bend them. Avoid getting fingerprints on them, particularly on the shiny
side.
 Dirt, scratches, warping, pin holes or other
disc damage could cause the player to skip
or to repeat a section of a track. (To see a
pin hole, hold the disc up to the light.)
 Remove discs from the players when not in
use. Store them in their plastic cases away
from moisture, heat and direct sunlight.
To clean a disc: Wipe it with a soft, lint-free
cloth that has been dampened with water.
Wipe in a straight line from the center to the
edge of the disc (not in circles). Dry it with
another soft, lint-free cloth. Do not use a
conventional record cleaner or anti-static
device.
210
LX_Navi_OM60N29U_(U)
15.07.30 20:43
6. TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
CD-R/RW AND DVD-R/RW
DISCS
This DVD player conforms to NTSC/
PAL color TV formats. DVD video discs
conforming to another format such as
SECAM cannot be used.
Region codes: Some DVD video discs have
the following region code indicating which
countries the DVD video disc can be played
in on this DVD player. If you attempt to play 4
an inappropriate DVD video disc on this
player, error message appears on the
screen. Even if the DVD video disc does not
have a region code, there are cases when it
cannot be used.
Code
ALL
1
AUDIO/VISUAL SYSTEM
 CD-R/CD-RW discs that have not been
subject to the “finalizing process” (a process that allows discs to be played on a
conventional CD player) cannot be played.
 It may not be possible to play CD-R/CD-RW
discs recorded on a music CD recorder or a
personal computer because of disc characteristics, scratches or dirt on the disc, or dirt,
condensation, etc. on the lens of the unit.
 It may not be possible to play discs
recorded on a personal computer depending on the application settings and the environment. Record with the correct format.
(For details, contact the appropriate application manufacturers of the applications.)
 CD-R/CD-RW discs may be damaged by
direct exposure to sunlight, high temperatures or other storage conditions. The unit
may be unable to play some damaged
discs.
 If you insert a CD-RW disc into the player,
playback will begin more slowly than with a
conventional CD or CD-R disc.
 Recordings on CD-R/CD-RW cannot be
played using the DDCD (Double Density
CD) system.
DVD VIDEO DISCS
Country
All countries
North America
211
LX_Navi_OM60N29U_(U)
15.07.30 20:43
6. TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
■ MARKS SHOWN ON DVD VIDEO
DISCS
NTSC/PAL
Indicates NTSC/PAL
format of color TV.
Indicates the number
of audio tracks.
Indicates the number
of language subtitles.
Indicates the number
of angles.
Indicates the screen to
be selected.
Wide screen: 16:9
Standard: 4:3
Indicates a region
code by which this video disc can be played.
“ALL”: in all countries
Number: region code
DVD VIDEO DISC GLOSSARY
DVD video discs: Digital Versatile Disc that
holds video. DVD video discs have adopted
“MPEG2”, one of the world standards of
digital compression technologies. The picture data is compressed by 1/40 on average and stored. Variable rate encoded
technology in which the volume of data assigned to the picture is changed depending
on the picture format has also been adopted. Audio data is stored using PCM and
Dolby Digital, which enables higher quality
of sound. Furthermore, multi-angle and
multi-language features will also help users
enjoy the more advanced technology of
DVD video.
Viewer restrictions: This feature limits what
can be viewed in conformity with a level of
restrictions of the country. The level of restrictions varies depending on the DVD video disc. Some DVD video discs cannot be
played at all, or violent scenes are skipped
or replaced with other scenes.
• Level 1: DVD video discs for children can
be played.
• Level 2 - 7: DVD video discs for children
and G-rated movie can be played.
• Level 8: All types of the DVD video discs
can be played.
212
LX_Navi_OM60N29U_(U)
15.07.30 20:43
6. TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
 Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
iPod
 “Made for iPod”, “Made for iPhone”, and 4
“Made for iPad” mean that an electronic
accessory has been designed to connect
specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance
standards.
 Apple is not responsible for the operation
of this device or its compliance with safety
and regulatory standards. Please note that
the use of this accessory with iPod, iPhone,
or iPad may affect wireless performance.
 iPad, iPhone, iPod, iPod classic, iPod nano,
and iPod touch are trademarks of Apple
Inc., registered in the U.S. and other countries. Lightning is a trademark of Apple Inc.
 The Lightning connector works with
iPhone 5s, iPhone 5c, iPhone 5, iPod touch
(5th generation), and iPod nano (7th generation).
AUDIO/VISUAL SYSTEM
Multi-angle feature: The same scene can
be enjoyed from different angles.
Multi-language feature: The subtitle and
audio language can be selected.
Region codes: The region codes are provided on DVD players and DVD discs. If the
DVD video disc does not have the same region code as the DVD player, you cannot
play the disc on the DVD player. For region
codes: (P.211)
Audio: This DVD player can play linear
PCM, Dolby Digital and MPEG audio format DVDs. Other decoded types cannot be
played.
Title and chapter: Video and audio programs stored in DVD video discs are divided into parts by title and chapter.
Title: The largest unit of the video and audio
programs stored on DVD video discs. Usually, one movie, one album, or one audio
program is assigned as a title.
Chapter: A unit smaller than that of title. A
title comprises of several chapters.
213
LX_Navi_OM60N29U_(U)
15.07.30 20:43
6. TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
 The 30-pin connector works with iPhone
4S, iPhone 4, iPhone 3GS, iPhone 3G,
iPhone, iPod touch (1st through 4th generation), iPod classic, and iPod nano (1st
through 6th generation).
 USB works with iPhone 5s, iPhone 5c,
iPhone 5, iPhone 4S, iPhone 4, iPhone
3GS, iPhone 3G, iPhone, iPod touch (1st
through 5th generation), iPod classic, and
iPod nano (1st through 7th generation).
 Bluetooth® technology works with iPhone
5s, iPhone 5c, iPhone 5, iPhone 4S, iPhone
4, iPhone 3GS, iPhone 3G, iPhone, and
iPod touch (2nd through 5th generation).
COMPATIBLE MODELS
The following iPod®, iPod nano®, iPod
classic®, iPod touch® and iPhone® devices can be used with this system.
Made for
• iPod touch (5th generation)*
• iPod touch (4th generation)
• iPod touch (3rd generation)
• iPod touch (2nd generation)
• iPod touch (1st generation)
• iPod classic
• iPod with video
• iPod nano (7th generation)*
• iPod nano (6th generation)
• iPod nano (5th generation)
• iPod nano (4th generation)
• iPod nano (3rd generation)
• iPod nano (2nd generation)
• iPod nano (1st generation)
• iPhone 5s*
• iPhone 5c*
• iPhone 5*
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
*: iPod video not supported
INFORMATION
●Depending on differences between models or software versions etc., some models might be incompatible with this
system.
214
LX_Navi_OM60N29U_(U)
15.07.30 20:43
6. TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
■ CORRESPONDING
FREQUENCY
FILE INFORMATION
■ COMPATIBLE USB DEVICES
USB communication
formats
USB 2.0 HS
(480 Mbps) and
FS (12 Mbps)
File formats
FAT 16/32
Correspondence class
Mass
class
Item
Compatible
file format
(audio)
COMPRESSED
USB/iPod
DISC
MP3/WMA/AAC
Folders in the
device
Maximum
3000
Maximum
192
Files in the
device
Maximum
9999
Maximum
255
Files per
folder
Maximum
255

Frequency
(kHz)
MP3 files:
MPEG 1 LAYER 3
32/44.1/48
MP3 files:
MPEG 2 LSF LAYER 3
16/22.05/24
WMA files:
Ver. 7, 8, 9* (9.1/9.2)
32/44.1/48
AAC files:
MPEG4/AAC-LC
11.025/12/16/
22.05/24/32/
44.1/48
4
*: Only compatible with Windows Media
Audio Standard
■ CORRESPONDING BIT RATES*1
File type
Bit rate (kbps)
MP3 files:
MPEG 1 LAYER 3
32 - 320
MP3 files:
MPEG 2 LSF LAYER 3
8 - 160
WMA files: Ver. 7, 8
CBR 48 - 192
WMA files:
Ver. 9*2 (9.1/9.2)
CBR 48 - 320
AAC files:
MPEG4/AAC-LC
16 - 320
*1: Variable Bit Rate (VBR) compatible
*2: Only compatible with Windows Media
Audio Standard
215
LX_Navi_OM60N29U_(U)
15.07.30 20:43
AUDIO/VISUAL SYSTEM
■ COMPATIBLE
FILES
storage
File type
SAMPLING
6. TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
■ COMPATIBLE CHANNEL MODES
File type
Channel mode
MP3 files
Stereo, joint stereo, dual
channel and monaural
WMA files
2ch
AAC files
1ch, 2ch (Dual channel is not
supported)
 MP3 (MPEG Audio Layer 3), WMA
(Windows Media Audio) and AAC
(Advanced Audio Coding) are audio compression standards.
 This system can play MP3/WMA/AAC
files on CD-R/CD-RW/DVD-R/DVD-RW
discs and USB memory.
 This system can play disc recordings compatible with ISO 9660 level 1 and level 2
and with the Romeo and Joliet file system
and UDF (2.01 or lower).
 When naming an MP3/WMA/AAC file,
add an appropriate file extension (.mp3/
.wma/.m4a).
 This system plays back files with .mp3/
.wma/.m4a file extensions as MP3/WMA/
AAC files respectively. To prevent noise
and playback errors, use the appropriate
file extension.
 This system can play only the first session/
border when using multi session/border
compatible discs.
 MP3 files are compatible with the ID3 Tag
Ver. 1.0, Ver. 1.1, Ver. 2.2 and Ver. 2.3 formats. This system cannot display disc title,
track title and artist name in other formats.
 WMA/AAC files can contain a WMA/
AAC tag that is used in the same way as an
ID3 tag. WMA/AAC tags carry information such as track title and artist name.
 The emphasis function is available only
when playing MP3 files.
 This system can play back AAC files
encoded by iTunes.
216
LX_Navi_OM60N29U_(U)
15.07.30 20:43
6. TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
001.mp3
002.wma
Folder 1
003.mp3
Folder 2
004.mp3
005.wma
Folder 3
006.m4a
 The play order of the compact disc with the 4
structure shown above is as follows:
001.mp3
002.wma . . .
006.m4a
 The order changes depending on the personal computer and MP3/WMA/AAC
encoding software you use.
TERMS
PACKET WRITE
 This is a general term that describes the process of writing data on-demand to CD-R,
etc., in the same way that data is written to
floppy or hard discs.
ID3 TAG
 This is a method of embedding trackrelated information in an MP3 file. This
embedded information can include the
track number, track title, the artist’s name,
the album title, the music genre, the year of
production, comments, cover art and other
data. The contents can be freely edited
using software with ID3 tag editing functions. Although the tags are restricted to a
number of characters, the information can
be viewed when the track is played back.
217
LX_Navi_OM60N29U_(U)
15.07.30 20:43
AUDIO/VISUAL SYSTEM
 The sound quality of MP3/WMA files generally improves with higher bit rates. In
order to achieve a reasonable level of
sound quality, discs recorded with a bit rate
of at least 128 kbps are recommended.
 m3u playlists are not compatible with the
audio player.
 MP3i (MP3 interactive) and MP3PRO
formats are not compatible with the audio
player.
 The player is compatible with VBR (Variable Bit Rate).
 When playing back files recorded as VBR
(Variable Bit Rate) files, the play time will
not be correctly displayed if the fast forward or reverse operations are used.
 It is not possible to check folders that do not
include MP3/WMA/AAC files.
 MP3/WMA/AAC files in folders up to 8
levels deep can be played. However, the
start of playback may be delayed when
using discs containing numerous levels of
folders. For this reason, we recommend
creating discs with no more than 2 levels of
folders.
6. TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
WMA TAG
 WMA files can contain a WMA tag that is
used in the same way as an ID3 tag. WMA
tags carry information such as track title
and artist name.
ISO 9660 FORMAT
 This is the international standard for the formatting of CD-ROM folders and files. For
the ISO 9660 format, there are 2 levels of
regulations.
 Level 1: The file name is in 8.3 format (8
character file names, with a 3 character file
extension. File names must be composed of
one-byte capital letters and numbers. The
“_” symbol may also be included.)
 Level 2: The file name can have up to 31
characters (including the separation mark
“.” and file extension). Each folder must
contain fewer than 8 hierarchies.
WMA
 WMA (Windows Media Audio) is an audio
compression format developed by
Microsoft®. It compresses files into a size
smaller than that of MP3 files. The decoding formats for WMA files are Ver. 7, 8 and
9.
AAC
 AAC is short for Advanced Audio Coding
and refers to an audio compression technology standard used with MPEG2 and
MPEG4.
m3u
 Playlists created using “WINAMP” software have a playlist file extension (.m3u).
MP3
 MP3 is an audio compression standard
determined by a working group (MPEG) of
the ISO (International Standard Organization). MP3 compresses audio data to about
1/10 the size of that on conventional discs.
218
LX_Navi_OM60N29U_(U)
15.07.30 20:43
6. TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
ERROR MESSAGES
Mode
Message
“No disc found.”
It indicates that there is no disc in the DVD player.
“Check disc”
It indicates that the disc is dirty, damaged, or it
was inserted upside down. Clean the disc or insert it correctly.
It indicates a disc which is not playable is inserted.
CD/DVD
There is a trouble inside the system.
Eject the disc.
“Region Code Error”
It indicates that the DVD region code is not set
properly.
“USB Error”
This indicates a problem in the USB memory or
its connection.
“No music files found.”
This indicates that no MP3/WMA/AAC files
are included in the USB memory.
“iPod Error.”
This indicates a problem in the iPod or its connection.
“No music files found.”
This indicates that there is no music data in the
iPod.
“No video files found.”
This indicates that no video files are included in
the iPod.
“Please check the iPod
firmware version.”
This indicates that the software version is not
compatible. Perform the iPod firmware updates
and try again.
“iPod authorization failed.”
This indicates that it failed to authorize the iPod.
Please check your iPod.
Bluetooth®
Audio
“Music tracks not supported. Please check your portable player.”
This indicates a problem in the Bluetooth® device.
219
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4
AUDIO/VISUAL SYSTEM
“DISC Error”
USB
iPod
Explanation
6. TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
INFORMATION
●If the malfunction is not rectified: Take your vehicle to your Lexus dealer.
220
LX_Navi_OM60N29U_(U)
15.07.30 20:43
7. REAR SEAT ENTERTAINMENT SYSTEM FEATURES
1. REAR SEAT ENTERTAINMENT SYSTEM FEATURES*
QUICK REFERENCE
The rear seat entertainment system is designed for the rear passengers to enjoy audio/visual system. When audio/visual equipment is connected to the A/V input port,
rear passengers can enjoy different audio sources on each display.
The system can be used when the engine switch is in ACCESSORY or IGNITION
ON mode.
FUNCTION INDEX
4
Page
Using the remote controller
224
Turning on/off the rear entertainment system
225
Connecting a device to rear A/V input port
226
Selecting the sound mode
226
Selecting the source
227
Operating rear seat entertainment system from the front seats
228
Rear seat entertainment system operation
229
Rear seat entertainment system settings
251
Tips for operating rear seat entertainment system
254
AUDIO/VISUAL SYSTEM
Operation
*: If equipped
221
LX_Navi_OM60N29U_(U)
15.07.30 20:43
7. REAR SEAT ENTERTAINMENT SYSTEM FEATURES
OVER VIEW
No.
Name
Remote controller
Display
Front audio/visual system
Headphone volume control dials and headphone jacks
A/V input port (VTR and HDMI port)
222
LX_Navi_OM60N29U_(U)
15.07.30 20:43
7. REAR SEAT ENTERTAINMENT SYSTEM FEATURES
DISPLAY
A display is installed in the back of each
front seat. When audio-video equipment is connected to the A/V input port
or HDMI port, rear passengers can enjoy different audio sources on each display. (P.250)
TILTING THE DISPLAY
When the display is hard to be seen, the
display can be tilted.
4
WARNING
INFORMATION
●When tumbling the second seat, install
the display cover for the rear seat
entertainment system.
●Take care not to jam your hand while tilting the display. Otherwise, it may cause
an injury or damage of the display.
●There is a possibility of burning your
hands, etc. when tilting the display, as the
display can become hot when the vehicle
is left for long periods of time in hot
weather.
223
LX_Navi_OM60N29U_(U)
15.07.30 20:43
AUDIO/VISUAL SYSTEM
 The display angle can be adjusted between
0 degree to 50 degree.
7. REAR SEAT ENTERTAINMENT SYSTEM FEATURES
2. SOME BASICS
USING THE REMOTE
CONTROLLER
The rear seat entertainment system can
be operated with the remote controller.
The system cannot be operated by
touching the switches on the screen directly.
Before using the remote controller (for
new vehicle owners): P.254
No.
Function
Press to turn on/off the rear seat entertainment system.
Slide to select which screen of the
rear seat entertainment system to
operate.
“L”: Left-side
“R”: Right-side
Press to turn the screen on/off.
(P.225)
Press to select the “DISC” mode.
(P.227)
Press to input the selected control
icon.
Press to display the setting screen.
(P.251)
Press to adjust the volume. This function is only available when sound is
being output from the speakers.
(P.227)
Press to select the “Rear-HDMI”
mode.
Press to select a control icon.
Press to display the audio/visual
source selection screen. (P.227)
224
LX_Navi_OM60N29U_(U)
15.07.30 20:43
7. REAR SEAT ENTERTAINMENT SYSTEM FEATURES
TURNING ON/OFF THE REAR
ENTERTAINMENT SYSTEM
1 Press the
, “DISC”, “INPUT” or
“SOURCE” button.
TURNING ON/OFF THE
DISPLAY
1 Press the
button.
4
button
INFORMATION
●Turning on/off operations can be performed from the front seat. (P.228)
but-
INFORMATION
●When a display is turned off, sound for
that side will also be turned off.
225
LX_Navi_OM60N29U_(U)
15.07.30 20:43
AUDIO/VISUAL SYSTEM
 To turn off the system, press the
again.
 To turn off the display, press the
ton again.
7. REAR SEAT ENTERTAINMENT SYSTEM FEATURES
CONNECTING A DEVICE TO
REAR A/V INPUT PORT
1 Open the cover and connect audio/visual equipment to the A/V input port.
SELECTING THE SOUND
MODE
HEADPHONE MODE
To listen to the rear seat entertainment
system, use headphones.
Volume knob
 Press and then turn clockwise/counterclockwise to increase/decrease the volume.
Headphones jack
 Connect a pair of headphones to the jack.
226
LX_Navi_OM60N29U_(U)
15.07.30 20:43
7. REAR SEAT ENTERTAINMENT SYSTEM FEATURES
SPEAKER MODE
SELECTING THE SOURCE
Sound from the rear seat entertainment
system can be output through the
speakers.
The front and rear audio/visual source
can be controlled from the rear seat entertainment system.
1 Display the audio control screen.
1 Press the “SOURCE” button.
(P.227)
2 Select
.
4
AUDIO/VISUAL SYSTEM
 The speaker volume is adjusted using the
remote controller. (P.224)
2 Select the desired source.
INFORMATION
●The page indicators above the source
icons can be selected to change the
source icon page.
●If the cursor is on the rightmost source
icon, pressing the  will change the
source icon page.
227
LX_Navi_OM60N29U_(U)
15.07.30 20:43
7. REAR SEAT ENTERTAINMENT SYSTEM FEATURES
Audio/visual
source
Button
Page
AM/FM/SAT
“AM”, “FM”,
“SAT”
229
Internet radio
“Apps”

Audio
CD
MP3/WMA/
AAC disc
“DISC”
231
DVD
“DISC”
234
USB audio
“USB”
241
iPod audio/
video
“iPod”
244
Bluetooth®
audio
“Bluetooth*”
247
AUX, External, HDMI
“External”,
“Rear-HDMI”
250
*: The Bluetooth® word mark and
logos are registered trademarks
owned by Bluetooth SIG, Inc.
INFORMATION
●If the selected source is currently being
received or played on the front audio/
visual system, the same content will be
output by the rear seat entertainment system.
OPERATING REAR SEAT
ENTERTAINMENT SYSTEM
FROM THE FRONT SEATS
1 Display the audio control screen.
(P.145)
2 Select “Source”.
3 Select “Rear”.
4 Select the desired button.
No.
Function
Select to turn the rear seat entertainment system on/off.
Select to lock the system so passengers in the rear seats cannot operate
the rear seat entertainment system.
Select to output sound from rear
seat entertainment system over the
speakers in the vehicle. Select
“Right” or “Left” to select for which
screen sound will be output.
(P.227)
228
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
1. AM/FM/SAT RADIO
OVERVIEW
The radio operation screen can be reached by the following method:
Press the “SOURCE” button, and select “AM”, “FM” or “SAT” (The XM Satellite radio).
■ REMOTE CONTROLLER
4
AUDIO/VISUAL SYSTEM
No.
Function
AM/FM Radio: Press to adjust the frequency.
SAT Radio: Press to select a channel.
Press and hold until you hear a beep to seek for receivable stations/channels.
Cache radio only: Press to play/pause.
Cache radio only: Press to skip forward/rewind 2 minutes.
Cache radio only: Press and hold to fast forward/rewind continuously.
Press to select a preset station/channel.
Press and hold until you hear a beep to seek for receivable stations/channels.
229
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
No.
Function
AM/FM Radio: Press to select a preset station/channel.
SAT Radio: Press to select a program type/channel category.
INFORMATION
●To return to the live radio broadcast, select “Live”.
230
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
2. CD
OVERVIEW
Audio CD and MP3/WMA/AAC discs can be played on this system.
The disc operation screen can be reached by the following methods:
Press the “SOURCE” button, and select “DISC”.
Inserting a disc (P.146)
■ CONTROL SCREEN
4
AUDIO/VISUAL SYSTEM
Audio CD
MP3/WMA/AAC disc
231
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
■ REMOTE CONTROLLER
No.
Function
Select to set repeat playback. (P.233)
Select to set random playback. (P.233)
Press to select a track/file.
Press and hold to fast forward/rewind.
Press to play/pause.
Press and hold to fast forward/rewind.
MP3/WMA/AAC disc:
Press to select a folder.
Press and hold the “ ” button to select the top file stored in the top folder in the disc.
232
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
REPEATING
RANDOM ORDER
The track/file or folder currently being
listened to can be repeated.
Tracks/files or folders can be automatically and randomly selected.
1 Select
1 Select
.
.
 Each time
is selected, the mode
changes as follows:
 Each time
is selected, the mode
changes as follows:
Audio CD
Audio CD
MP3/WMA/AAC disc
MP3/WMA/AAC disc
• track repeat  off
AUDIO/VISUAL SYSTEM
• file repeat  folder repeat  off*1
• file repeat  off*2
1
* : When random playback is off
*2: When random playback is on
4
• random (1 disc random)  off
• random (1 folder random) 
folder random (1 disc random)  off
233
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
3. DVD
OVERVIEW
The disc operation screen can be reached by the following methods:
Press the “SOURCE” button, and select “DISC”.
Inserting a disc (P.146)
■ REMOTE CONTROLLER
234
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
No.
Function
Press to select a chapter.
Press and hold to fast forward/rewind.
Press to play/pause.
 During playback: Press and hold to fast forward.
 During a pause: Press and hold to slow forward.
Press to stop.
4
Press to display the menu screen.
AUDIO/VISUAL SYSTEM
Press to display the option screen. (P.236)
Press and hold to fast rewind.
235
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
DVD VIDEO OPTIONS
1 Press the “OPTION” button.
2 Check that the following screen is displayed.
No.
Function
Page
Select to display the initial
setup screen.
237
Select to turn off the option
screen.

Select to display the next or
previous page.

 During playback: Select
and hold to fast forward.
 During a pause: Select
and hold to slow forward.

Select to play/pause.

Select to stop.

Select and hold to rewind.

Select to display the menu
screen.

Select to display the top
menu screen.

Select to change the angle.
240
Select to change the subtitle language.
240
236
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
No.
Function
Page
Select to change the audio
language.
239
Select to return to a predetermined scene.

Select to search for a title.
INITIAL SETUP
1 Select “Setup”.
2 Select the items to be set.
239
4
AUDIO/VISUAL SYSTEM
237
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
No.
Function
Page
Select to change the initial
audio language.
238
Select to change the initial
subtitle language.
238
Select to change the initial
language of the disc menu.
238
Select to set the angle mark
on/off.

Select to set the parental
lock.
238
Select to set a dynamic
range.
239
Select to initialize all menus.

Select to display the second
page.

3 Select “OK”.
■ AUDIO LANGUAGE
1 Select “Audio Language”.
2 Select the desired language to be
heard.
 If the desired language to be heard cannot
be found on this screen, select “Other” and
enter a language code. (P.206)
■ SUBTITLE LANGUAGE
1 Select “Subtitle Language”.
2 Select the desired language to be read.
 If the desired language to be read cannot
be found on this screen, select “Other” and
enter a language code. (P.206)
■ MENU LANGUAGE
1 Select “Menu Language”.
2 Select the desired language to be read.
 If the desired language to be read cannot
be found on this screen, select “Other” and
enter a language code. (P.206)
■ PARENTAL LOCK
1 Select “Parental Lock”.
2 Enter the 4-digit personal code.
3 Select a parental level (1-8).
238
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
■ DYNAMIC RANGE
The difference between the lowest and
highest sound volumes can be adjusted.
1 Select “Dynamic Range”.
2 Each time “Dynamic Range” is select-
1 Select “Search”.
2 Enter the title number or chapter number, and select “OK”.
 The player starts playing video for that title
or chapter number.
4
CHANGING THE AUDIO
LANGUAGE
The audio language can be changed for
discs with multiple audio languages.
1 Select “Audio”.
2 Each time “Audio” is selected, another
language available on the disc is selected.
 The languages available are restricted to
those available on the DVD disc.
239
LX_Navi_OM60N29U_(U)
15.07.30 20:43
AUDIO/VISUAL SYSTEM
ed, the setting changes in the following
order:
“MAX”: Maximum dynamic range
“STD”: Standard dynamic range
“MIN”: Minimum dynamic range
SEARCHING FOR A TITLE OR
CHAPTER
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
CHANGING THE SUBTITLE
LANGUAGE
The subtitle language can be changed
for discs with multiple subtitle languages.
1 Select “Subtitle”.
2 Each time “Subtitle” is selected, another language available on the disc is selected.
 The languages available are restricted to
those available on the DVD disc.
 When “Hide” is selected, the subtitles can
be hidden.
CHANGING THE ANGLE
The angle can be selected for discs that
are multi-angle compatible.
1 Select “Angle”.
2 Each time “Angle” is selected, the angle
is changed.
 The angles available are restricted to those
available on the DVD disc.
240
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
4. USB MEMORY
OVERVIEW
USB audio can be played on this system.
The USB memory operation screen can be reached by the following methods:
Press the “SOURCE” button, and select “USB”.
Connecting a USB memory (P.147)
■ CONTROL SCREEN
4
AUDIO/VISUAL SYSTEM
241
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
■ REMOTE CONTROLLER
No.
Function
Select to set repeat playback. (P.243)
Select to set random playback. (P.243)
Press to select a file/track.
Press and hold to fast forward/rewind.
Press to play/pause.
Press and hold to fast forward/rewind.
Press to select a folder/album.
242
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
REPEATING
The file/track or folder/album currently
being listened to can be repeated.
1 Select
.
 Each time
is selected, the mode
changes as follows:
When random playback is off
4
AUDIO/VISUAL SYSTEM
• file/track repeat  folder/album repeat
 off
When random playback is on
• file/track repeat  off
RANDOM ORDER
Files/tracks or folders/albums can be
automatically and randomly selected.
1 Select
.
 Each time
is selected, the mode
changes as follows:
• random (1 folder/album random) 
folder/album random (all folder/album
random)  off
243
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
5. iPod
OVERVIEW
iPod audio and iPod video can be played on this system.
For viewing videos from an iPod, it is necessary to set the front audio/visual system’s
“Video Sound Input” to “A/V”. (P.202)
The iPod operation screen can be reached by the following methods:
Press the “SOURCE” button, and select “iPod”.
Connecting an iPod (P.147)
■ CONTROL SCREEN
244
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
■ REMOTE CONTROLLER
4
AUDIO/VISUAL SYSTEM
No.
Function
Select to set repeat playback. (P.246)
Select to set random playback. (P.246)
Select to display the video screen.
To return to the audio screen, press the “SOURCE” button and select “Music”.
Press to select a track/file.
Press and hold to fast forward/rewind.
Press to play/pause.
Press and hold to fast forward/rewind.
245
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
iPod AUDIO
REPEATING
The track currently being listened to can
be repeated.
1 Select
.
 Each time
is selected, the mode
changes as follows:
• track repeat  off
RANDOM ORDER
Tracks or albums can be automatically
and randomly selected.
1 Select
.
 Each time
is selected, the mode
changes as follows:
• track shuffle  album shuffle  off
246
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
6. Bluetooth® AUDIO
OVERVIEW
The Bluetooth audio operation screen can be reached by the following method:
Press the “SOURCE” button and select “Bluetooth*”.
Connecting a Bluetooth audio device (P.193)
■ CONTROL SCREEN
4
AUDIO/VISUAL SYSTEM
*: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
247
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
■ REMOTE CONTROLLER
No.
Function
Select to set repeat playback. (P.249)
Select to set random playback. (P.249)
Press to select a track.
Press and hold to fast forward/rewind.
Press to play/pause.
Press and hold to fast forward/rewind.
248
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
Bluetooth® AUDIO
REPEATING
The track or album currently being listened to can be repeated.
1 Select
.
Tracks or albums can be automatically
and randomly selected.
1 Select
.
 Each time
is selected, the mode
changes as follows:
• album random  all track random  off
4
AUDIO/VISUAL SYSTEM
 Each time
is selected, the mode
changes as follows:
• track repeat  album repeat  off
RANDOM ORDER
249
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
7. EXTERNAL DEVICES
OVERVIEW
The rear seat entertainment system plays videos and sound when audio/visual equipment is connected to the A/V input port.
The external devices operation screen can be reached by the following methods:
Press the “SOURCE” button, and select “External” or “Rear-HDMI”.
Connecting a external device (P.147, 226)
INFORMATION
●In rear external device mode, different sound/visual modes can be enjoyed for the left and
right screens when
is off. (P.227)
250
LX_Navi_OM60N29U_(U)
15.07.30 20:43
9. SETUP FOR REAR SEAT ENTERTAINMENT SYSTEM
1. REAR SEAT ENTERTAINMENT SYSTEM SETTINGS
ADJUSTING THE SCREEN
DISPLAYING THE SETTING
SCREEN
The screen image quality, such as the
brightness and contrast levels, can be
adjusted. Adjustable items depend on
the selected input source.
1 Press the “SETTING” button.
1 Display the settings screen. (P.251)
2 Select the “Display” tab.
3 Select the item to be set.
AUDIO/VISUAL SYSTEM
2 Select the tab to be set.
No.
No.
Function
Page
Select to adjust the screen.
251
Select to change the
screen size.
252
Select to display the setup
screen.
253
Function
“Brightness” “-”
Select to darken
the screen.
“Brightness” “+”
Select to brighten the screen.
“Contrast” “-”
Select to weaken the contrast.
“Contrast” “+”
Select
to
strengthen the
contrast.
251
LX_Navi_OM60N29U_(U)
15.07.30 20:43
4
9. SETUP FOR REAR SEAT ENTERTAINMENT SYSTEM
No.
Function
“Color” “R”
Select
to
strengthen the
red color.
“Color” “G”
Select
to
strengthen the
green color.
“Tone” “-”
Select to weaken the tone.
“Tone” “+”
Select
to
Strengthen the
tone.
CHANGING THE SCREEN
SIZE
The screen size can be changed for
each input mode individually.
1 Display the settings screen. (P.251)
2 Select the “Screen Size” tab.
3 Select the desired screen size.
No.
Function
Select to display the screen at the
original ratio.
Select to widen the 4:3 aspect
screen horizontally to fill the screen.
252
LX_Navi_OM60N29U_(U)
15.07.30 20:43
9. SETUP FOR REAR SEAT ENTERTAINMENT SYSTEM
“Settings” SCREEN
1 Display the settings screen. (P.251)
2 Select the “Settings” tab.
3 Select the item to be set.
4
AUDIO/VISUAL SYSTEM
No.
Function
Select to turn the display off. To turn
it on, press the “DISC”, “SETTING”,
“SOURCE” or “INPUT” button.
Select to turn on/off the “LCD AI”.
The “LCD AI” automatically determines the tone of the video image
and sets the contrast to an optimum
level, displaying a sharp image.
Select to turn the “Super Resolution” function on/off.
When turned on, the “Super Resolution” function enhances image quality to deliver a feeling of a higher
resolution image.
Select to switch between NTSC/
PAL input format. (PAL: indicator
on, NTSC: indicator off)
253
LX_Navi_OM60N29U_(U)
15.07.30 20:43
10. TIPS FOR OPERATING REAR SEAT ENTERTAINMENT SYSTEM
1. OPERATING INFORMATION
WARNING
●To prevent accidents and electric shock:
Do not disassemble or modify the remote
controller.
●When the remote controller is not used:
Stow the remote controller. Injuries may
result in the event of an accident or sudden braking.
●Removed battery and other parts: These
parts are small and if swallowed by a child
they can cause choking. Keep away from
children. Failure to do so could result in
death or serious injury.
NOTICE
●Cleaning the display: Wipe the display
with a dry soft cloth. If the screen is wiped
with a rough cloth, the surface of the
screen may be scratched.
●To prevent damage to the remote controller:
• Keep the remote controller away from
direct sunlight, heat and high humidity.
• Do not drop or strike the remote controller against hard objects.
• Do not sit on or place heavy objects on
the remote controller.
●For normal operation after replacing the
battery: Observe the following precautions to prevent accidents.
• Always work with dry hands. Moisture
may cause the battery to rust.
• Do not touch or move any other components inside the remote controller.
• Do not bend either of the battery terminals.
CAUTION SCREEN
A caution screen appears for a few seconds
when the rear display turns on.
WHEN APPEARS ON THE
SCREEN
indicates that the selected icon cannot
be used at this time.
THE REMOTE CONTROLLER
■ BEFORE USING THE REMOTE
CONTROLLER (FOR NEW VEHICLE OWNERS)
1 Remove the insulating sheet before using the remote controller.
INFORMATION
●An insulating sheet is set to prevent the
batteries from being depleted.
254
LX_Navi_OM60N29U_(U)
15.07.30 20:43
10. TIPS FOR OPERATING REAR SEAT ENTERTAINMENT SYSTEM
■ WHEN THE REMOTE CONTROLLER BATTERIES ARE FULLY DEPLETED
1 Remove the cover.
HEADPHONES
Infrared wireless headphones can also be
used. However, with some headphones
generally available in the market, it may be
difficult to catch signals properly. Lexus recommends the use of Lexus genuine wireless
headphones.
Contact your Lexus dealer.
4
VOLUME
stall new batteries.
■ IF THE REMOTE CONTROLLER
BATTERIES ARE DISCHARGED
The following symptoms may occur.
 The remote controller will not function
properly.
 The operational range is reduced.
■ USE TWO AA BATTERIES
 Batteries can be purchased at Lexus dealer,
electric appliance shop, or camera stores.
 Replace only with the same or equivalent
type recommended by Lexus dealer.
 Dispose of used batteries according to the
local laws.
255
LX_Navi_OM60N29U_(U)
15.07.30 20:43
AUDIO/VISUAL SYSTEM
2 Remove the depleted batteries and in-
 Adjust the volume when you connect the
headphone to the jack. Loud sounds may
have a significant impact on the human
body.
 Conversational speech on some DVDs is
recorded at a low volume to emphasize the
impact of sound effects. If you adjust the
volume assuming that the conversations
represent the maximum volume level that
the DVD will play, you may be startled by
louder sound effects or when you change
to a different audio source. Be sure to
adjust the volume with this in mind.
10. TIPS FOR OPERATING REAR SEAT ENTERTAINMENT SYSTEM
A/V INPUT PORT
OPERATING AUDIO/VISUAL
EQUIPMENT CONNECTED
TO THE SYSTEM
The volume can be adjusted using the vehicle’s audio controls. All other operations
must be made on the audio/visual equipment itself.
For details about operation of audio/visual
equipment, refer to the manufacturer’s instructions.
COPYRIGHTS AND
TRADEMARKS
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of
HDMI Licensing, LLC in the United States
and other countries.
NOTICE
●When the A/V input port is not in use:
Keep the A/V input port cover closed.
Inserting anything other than an appropriate plug may cause electrical failure or
a short circuit.
INFORMATION
●HDMI compatible format
• Compatible video signal:
480p, 576p,VGA
• Compatible sound signal:
LPCM 2ch
256
LX_Navi_OM60N29U_(U)
15.07.30 20:43
5
1
VOICE COMMAND SYSTEM
2
1
VOICE COMMAND SYSTEM
OPERATION
3
1. VOICE COMMAND SYSTEM ......... 258 4
USING THE VOICE COMMAND
SYSTEM .................................................................. 258
VOICE COMMAND SYSTEM
OPERATION ....................................................... 259
5
2. CASUAL SPEECH
6
RECOGNIZATION............................ 266
3. COMMAND LIST................................... 267
2
MOBILE ASSISTANT
OPERATION
8
1. MOBILE ASSISTANT ............................ 272
257
LX_Navi_OM60N29U_(U)
15.07.30 20:43
7
9
1. VOICE COMMAND SYSTEM OPERATION
1. VOICE COMMAND SYSTEM
The voice command system enables the
audio/visual, hands-free systems, etc. to
be operated using voice commands.
Refer to the command list for samples of
voice commands. (P.267)
MICROPHONE
USING THE VOICE
COMMAND SYSTEM
STEERING SWITCH
 It is unnecessary to speak directly into the
microphone when giving a command.
INFORMATION
Talk switch
 Press the talk switch to start the voice command system.
 To cancel voice recognition, press and hold
the talk switch.
●Wait for the confirmation beep before
speaking a command.
●Voice commands may not be recognized
if:
• Spoken too quickly.
• Spoken at a low or high volume.
• The roof or windows are open.
• Passengers are talking while voice commands are spoken.
• The air conditioning speed is set high.
• The air conditioning vents are turned
towards the microphone.
●In the following conditions, the system
may not recognize the command properly and using voice commands may not
be possible:
• The command is incorrect or unclear.
Note that certain words, accents or
speech patterns may be difficult for the
system to recognize.
• There is excessive background noise,
such as wind noise.
●This system may not operate immediately
after the engine switch is turned to
ACCESSORY or IGNITION ON mode.
258
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. VOICE COMMAND SYSTEM OPERATION
VOICE COMMAND SYSTEM
OPERATION
The voice command system is operated
by speaking commands corresponding
to each function. Commands can be
confirmed on the screen. The voice
command system can be operated from
either the main menu screen or shortcut
menu screen.
OPERATION FROM THE
MAIN MENU
 If the shortcut menu screen is displayed,
say “Main menu” or select “Main menu” to
display the main menu screen.
 Voice guidance for the voice command
system can be skipped by pressing the
talk switch.
2 Say the desired category name.
 All shortcut commands can be recognized
on this screens.
 To display the shortcut menu screen, say
“Shortcut menu” or select “Shortcut
menu”.
 Saying “Help” or selecting “?” prompts
voice guidance to offer examples of
commands and operation methods.
the screen.
OPERATION FROM THE
SHORTCUTS
1 Press the talk switch.
 If the main menu screen is displayed, say
“Shortcut menu” or select “Shortcut menu”
to display the shortcut menu screen.
 Voice guidance for the voice command
system can be skipped by pressing the
talk switch.
2 Say the tab selection command or select the desired tab.
 All commands, including those which are
not displayed on the screen, can be recognized.
 Commands related to each function are
displayed on the screen of each function
tab. Some commonly used commands are
displayed on the shortcut tab screen. Say
“More Hints” to display more commonly
used commands.
 To display the main menu screen, say “Main
menu” or select “Main menu”.
 Saying “Help” prompts voice guidance to
offer examples of commands and operation methods.
259
LX_Navi_OM60N29U_(U)
15.07.30 20:43
5
VOICE COMMAND SYSTEM
1 Press the talk switch.
3 Say or select the desired command on
1. VOICE COMMAND SYSTEM OPERATION
3 Say the desired command.
 Registered POIs, registered names in the
contacts list etc., can be said in the place of
the “<>” next to the commands. (P.267)
For example: Say “Find nearby dining”,
“Call John Smith” etc.
 If a desired outcome is not shown, or if no
selections are available, perform one of the
following to return to the previous screen:
• Say “Go back”.
• Select “Go Back”.
 To cancel voice recognition, select
or press and hold the talk switch.
,
INFORMATION
●If the system does not respond or the
confirmation screen does not disappear,
press the talk switch and try again.
●If a voice command cannot be recognized, follow the voice guidance and say
the voice command again.
●If a voice command cannot be recognized 5 times consecutively, voice recognition will be canceled.
Press the talk switch to restart the voice
command system.
●“Display Voice Confirmations” can be set
on/off on the “Voice Settings” screen.
(P.63)
●When “Display Voice Confirmations” is
set to on, voice recognition prompts will
be displayed for some voice commands
when recognized. If the recognized command is correct, say “Yes” or select “Yes”.
(Saying “No” or selecting “No” will display the previous screen.)
●When “Display Voice Confirmations” is
set to off, voice recognition prompts will
only be displayed for important voice
commands.
●If “Display Voice Confirmations” is set to
on and commands are generally recognized correctly, a confirmation screen
may be displayed asking if you would
wish to set “Display Voice Confirmations”
to off. To set to off, say “Yes” or select
“Yes”.
●“Voice Recognition Prompts” can be set
to on or off on the “Voice Settings”
screen. (P.63)
260
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. VOICE COMMAND SYSTEM OPERATION
INFORMATION
●Voice guidance can be canceled by setting voice prompts to off. Use this setting
when it is desirable to say a command
immediately after pressing the talk switch
and hearing a beep.
●The side display cannot be operated during voice recognition.
■ DISPLAYING THE “Voice Settings”
SCREENS
1 Select
.
INCREASING THE VOICE
RECOGNITION
PERFORMANCE
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Voice”.
4 Select “Train Voice Recognition”.
1 Press the talk switch.
2 Say “Launch <application name>”.
 LEXUS App Suite application screen is displayed.
VOICE COMMAND
EXAMPLE: PERFORMING A
DESTINATION SEARCH BY
ADDRESS (ENGLISH AND
FRENCH ONLY)
5
1 Press the talk switch.
2 Say “Enter an address”.
3 Say “<house number, street name, city
name, State>” in succession.
 As voice commands spoken in French are
only available for addresses in Quebec,
Canada, it is not necessary to say “<State>”
in French.
 The user will be asked to say sample
phrases. This will help the voice command
system adapt to the user’s accent.
261
LX_Navi_OM60N29U_(U)
15.07.30 20:43
VOICE COMMAND SYSTEM
 The “Voice Settings” screen will be displayed. (P.63)
VOICE COMMAND
EXAMPLE: LAUNCH LEXUS
App Suite APPLICATION
1. VOICE COMMAND SYSTEM OPERATION
 A confirmation screen will be displayed
showing the recognition results. If multiple
matching items are found, a selection
screen will be displayed. Say “<number>” or
select the number.
 Some areas cannot be recognized by the
voice recognition system.
 If voice commands cannot be recognized
repeatedly, a confirmation screen may be
displayed asking if you would wish to call a
“Destination Assist” operator for help.
(P.338) To call an operator, say “Yes” or
select “Yes”. (Saying “No” or selecting
“No” will display the previous screen.)
5 Say “Go directly” or select “Go Directly”.
 After this, follow the voice guidance and
search for a destination route by voice
command operation.
 For information regarding the state/
province setting to perform a destination
search by address: P.91
4 If the recognized address is correct, say
“Yes” or select “Yes”.
 To correct the city name, street name, or
house number, say “Change city”, “Change
street”, or “Change house number”. (Saying
“No” or “Go Back”, or selecting “No” or
“Go Back” will display the previous
screen.)
262
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. VOICE COMMAND SYSTEM OPERATION
INFORMATION
●The voice command recognition is
designed to recognize the main body of
the official street name.
For example: if the official street name is
“East Main Street”, the voice command
recognition will recognize “Main”.
●Say the desired number, cardinal direction etc. in the place of the “<>”.
For example: Say “West 555”.
1 Press the talk switch.
2 Say “Play song <name>”.
 A confirmation screen will be displayed
showing the recognition results. If multiple
matching items are found, a selection
screen will be displayed. Say “<number>” or
select the number.
 The system starts playing music and the
song lists are displayed.
5
VOICE COMMAND SYSTEM
●Inputting the house number can be
skipped.
●Even if the state set using voice recognition is different from the set state in the
“Address” screen (which was set when a
destination was set manually), the set
state in the “Address” screen will not
change. (P.92)
●The house number voice recognition
conditions are outlined below:
• Numerals: 10 digits or less
• Numerals and cardinal direction or a
hyphen and numerals: A total of 9 digits or less (Do not say “and”.)
• Cardinal direction or a hyphen and
numerals: A total of 9 digits or less
(Do not say “and”.)
• Numerals are recognized as single
digits only.
• The cardinal direction and hyphens
are only recognized once.
• The following cardinal directions can
be recognized: North, East, West and
South.
VOICE COMMAND
EXAMPLE: SEARCH FOR A
SONG
263
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. VOICE COMMAND SYSTEM OPERATION
INFORMATION
●The Gracenote database is only compatible with the USB or iPod mode.
●The list screens can be operated by
selecting using the Remote Touch as well
as by recognizing the voice commands.
●A USB memory or iPod must be connected to enable track searching and
playback. (P.179, 183)
●When a USB memory or iPod is connected, recognition data is created so
tracks can be searched using voice commands.
●Recognition data is updated under the
following conditions:
• When the USB memory or iPod data
has changed.
• When the voice recognition language is
changed. (P.57)
●While the recognition data is being created or being updated, a track search
cannot be performed using a voice command.
●When the “Music” tab is disappeared on
the shortcut menu screen, it is not possible to search for a track using a voice
command.
VOICE COMMAND
EXAMPLE: CALL NAME
1 Press the talk switch.
2 Say “Call <contacts> <phone types>”.
 A confirmation screen will be displayed
showing the recognition results. If multiple
matching items are found, a selection
screen will be displayed. Say “<number>” or
select the number.
264
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. VOICE COMMAND SYSTEM OPERATION
INFORMATION
1 Press the talk switch.
2 Say the phone number.
 In the same manner as it is displayed on the
screen, “Dial <number>”, after saying “Dial
a number” say the phone number.
 Say the phone number one digit at a time.
For example, if the phone number is
2345678:
Say “two three four five six seven eight”
3 Say “Call” or press the
switch on
the steering wheel.
 When the confirmation screen appears,
say “Yes” or select “Yes” or press the
switch on the steering wheel.
 When the system recognizes multiple
phone numbers, a phone number candidate list will be displayed on the screen.
Pressing the
switch on the steering
wheel makes a call to the top entry on the
list. If the desired phone number is not
displayed on the top of the screen, say
the number of the desired phone number
from the candidate list to select a phone
number from the candidate list.
265
LX_Navi_OM60N29U_(U)
15.07.30 20:43
5
VOICE COMMAND SYSTEM
●In the same manner as it is displayed on
the screen, “Call <contacts> <phone
types>”, after saying “Call a contact” say
the name, or the name and type of phone,
of a contact.
For example: “Call a contact”, “John
Smith” or “Call a contact”, “Mary Davis”,
“Mobile”
●There are 4 types of phones: Home,
Mobile, Office and Other.
●Short or abbreviated names in the contacts list may not be recognized. Change
names in the contacts list to full names.
●Sometimes a voice recognition result
confirmation screen will be displayed.
After confirming the result, say “Yes” or
“No”.
●When the system recognizes multiple
names from the contacts list, a name candidate list will be displayed on the screen.
If the desired name is not displayed on the
top of the screen, say or select the number of the name from the candidate list to
select a name from the candidate list.
●When a contact has multiple phone numbers registered in the contacts list, a candidate list will be displayed. If the desired
phone number is not displayed on the top
of the screen, say or select the number of
the desired phone number from the candidate list to select a phone number from
the candidate list.
VOICE COMMAND
EXAMPLE: DIAL NUMBER
1. VOICE COMMAND SYSTEM OPERATION
2. CASUAL SPEECH RECOGNIZATION
Due to natural language speech recognition technology, this system enables
recognition of a command when spoken
naturally. However, the system cannot
recognize every variation of each command. In some situations, it is possible to
omit the command for the procedure
and directly state the desired operation.
Not all voice commands are displayed in
the short cut menu.
INFORMATION
●If the command cannot be recognized
completely, the command input screen
will be displayed. (Search results will be
shown based on the part of the command
that was recognized.)
EXPRESSION EXAMPLES FOR
EACH FUNCTION
Command
Expression examples
“Go Home”
Navigate to my house.
Take me home.
“Enter an
Address”
I need a route to a street
address.
Give me a street.
“Find
<POI category>”
Search for a <Restaurants> around here.
I need a route to a nearby <Restaurants>.
“Call
<type>”
Get
me
<Robert
Brown>.
Contact the <Robert
Brown> phone of
<Work>.
<name>
“Dial <number>”
Can you get me
<3334445555>.
Ring <3334445555>.
“Play Artist
<name>”
Play the artist <name>.
I want to hear the band
<name>.
“Play Album
<name>”
Switch to the album
<name>.
266
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. VOICE COMMAND SYSTEM OPERATION
3. COMMAND LIST
Recognizable voice commands and their actions are shown below.
 Frequently used commands are listed in the following tables.
 For devices that are not installed in the vehicle, the related commands will not be displayed in the screen. Also, according to conditions, other commands may not be displayed in the screen.
 The functions available may vary according to the system installed.
 Voice recognition language can be changed. (P.57)
Basic
Command
Action
“Go Back”
Returns to the previous screen
“Go to <tab>”
Displays the command list of the selected tab
“More Hints”
Displays more commonly used commands
“Cancel”
Cancels the voice command system
Apps
When the voice recognition language is set to English.
Command
“Launch <apps>”
Action
Activates the LEXUS App Suite application
267
LX_Navi_OM60N29U_(U)
15.07.30 20:43
5
VOICE COMMAND SYSTEM
“Help”
Prompts voice guidance to offer examples of commands
or operation methods
1. VOICE COMMAND SYSTEM OPERATION
Navi
Command
Action
“Find <POI category>”
Displays a list of <POI category*1> near the current position*2
“Enter an Address”
Enables setting a destination by saying the address
“Go Home”
Displays the route to home
“Pause Guidance”
Stops the route guidance
“Resume Guidance”
Resumes the route guidance
“Show <POI> icons”
Displays the specified POI icons
“Delete Destination”
Deletes the destination
“Previous Destination”
Displays previous destinations
*1: For example; “Gas stations”, “Restaurants”, etc.
*2: Depending on the search results, a POI list may be provided by a relevant POI application of the LEXUS App suite. (P.332)
Phone
Command
Action
“Redial”
Places a call to the phone number of the latest outgoing
call
“Call Back”
Places a call to the phone number of latest incoming call
“Show Recent Calls”
Displays the call history screen
“Dial <phone number>”
Places a call to the said phone number
“Call <contacts> <phonetypes>”
Place a call to the said phone type of the contact from the
phone book
268
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. VOICE COMMAND SYSTEM OPERATION
Radio
Command
Action
“Tune to <frequency> AM”
Changes the radio to the specified AM frequency
“Tune to <frequency> FM”
Changes the radio to the specified FM frequency
“Play <genre> station”
Changes the radio to an FM station of the specified genre
“Tune to FM <frequency>
HD <number>”
Changes the radio to the specified HD radio station
“Tune to preset <number>”
Changes the radio to the specified preset radio station
“Tune to <name>”
Changes the radio to the satellite radio channel with the
specified name
5
“Tune to channel <number>”
Changes the radio to the specified satellite radio channel
number
“Play <genre> satellite station”
Changes the radio to a satellite radio channel of the specified genre
“AM Radio”
Selects AM radio mode
“FM Radio”
Selects FM radio mode
“Sirius XM”
Selects satellite radio mode
VOICE COMMAND SYSTEM
269
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. VOICE COMMAND SYSTEM OPERATION
Audio
Command
Action
“Play Playlist <name>”
Plays tracks from the selected playlist
“Play Artist <name>”
Plays tracks from the selected artist
“Play Song <name>”
Plays the selected track
“Play Album <name>”
Plays tracks from the selected album
“Turn Music On”
Turns the audio system on
“Turn Music Off”
Turns the audio system off
“Disc”
Selects the selected disc mode
“USB”
Selects USB audio mode
“iPod”
Selects iPod audio mode
“Bluetooth* Audio”
Selects Bluetooth® audio mode
“External”
Selects VTR mode
“Auxiliary”
Selects AUX audio mode
*: The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
Info
Command
Action
“Destination Assist”
Connects the system to the Lexus response center
“Show Forecast”
Displays weather information
“Show Traffic”
Displays traffic information
“Lexus Insider”
Displays the Lexus insider list
270
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. VOICE COMMAND SYSTEM OPERATION
Climate
Command
Action
“Turn Climate Control On”
Turns air conditioning system on
“Turn Climate Control Off”
Turns air conditioning system off
“Warmer”
Increases the temperature of the air conditioning system
“Cooler”
Decreases the temperature of the air conditioning system
“<#> degrees”
Changes the set temperature of the air conditioning system to <#> degrees*
*: Only within the possible temperature range of the air conditioning system
5
271
LX_Navi_OM60N29U_(U)
15.07.30 20:43
VOICE COMMAND SYSTEM
INFORMATION
●Commands relating to operation of the audio/visual and air conditioning systems can only
be performed when the audio and air conditioning systems are turned on.
2. MOBILE ASSISTANT OPERATION
1. MOBILE ASSISTANT
The Mobile Assistant feature will
activate Apple’s Siri® Eyes Free mode
via the steering wheel switches. To
operate the Mobile Assistant, a
compatible cellular phone must be
registered and connected to this system
via Bluetooth®. (P.40.)
1 Press and hold this switch until you hear
the beeps.
2 The Mobile Assistant can be used only
when the “Mobile Assistance” screen is
displayed.
 The volume of the Mobile Assistant can
be adjusted using the “PWR·VOL” knob
or steering wheel volume control
switches. The Mobile Assistant and
phone call volumes are synchronized.
INFORMATION
●The available features and functions may
vary based on the iOS version installed
on the connected device.
●Some Siri features are limited in Eyes
Free mode. If you attempt to use an
unavailable function, Siri will inform you
that the function is not available.
●If Siri is not enabled on the cellular phone
connected via Bluetooth®, an error message will be displayed on the screen.
●While a phone call is active, the Mobile
Assistant cannot be used.
●If using the navigation feature of the cellular phone, ensure the active audio source
is Bluetooth® audio or iPod in order to
hear turn by turn direction prompts.
 To cancel the Mobile Assistant, select
“Cancel”, or press and hold the
on the
steering wheel.
 To restart the Mobile Assistant for additional commands, press the
on the
steering wheel.
• Mobile Assistant can only be restarted
after the system responds to a voice command.
• After some phone and music commands,
the Mobile Assistant feature will automatically end to complete the requested
action.
272
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. MOBILE ASSISTANT OPERATION
MICROPHONE
It is not necessary to speak directly into
the microphone when using the Mobile
Assistant.
(Microphone
location:
P.258.)
INFORMATION
●Wait for the listening beeps before using
the Mobile Assistant.
●The Mobile Assistant may not recognize
commands in the following situations:
• Spoken too quickly.
• Spoken at a low or high volume.
• The roof or windows are open.
• Passengers are talking while the Mobile
Assistant is being used.
• The air conditioning speed is set high.
• The air conditioning vents are turned
toward the microphone.
5
VOICE COMMAND SYSTEM
273
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. MOBILE ASSISTANT OPERATION
274
LX_Navi_OM60N29U_(U)
15.07.30 20:43
6
1
INFORMATION *
2
1
INFORMATION DISPLAY
3
1. RECEIVING DOPPLER
WEATHER INFORMATION........... 276 4
DISPLAYING DOPPLER WEATHER
INFORMATION.................................................. 276
2. DATA SERVICES SETTINGS ............. 278
5
SETTING DOWNLOAD METHODS ........ 278
6
7
8
9
*: This function is not made available on some models.
275
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. INFORMATION DISPLAY
1. RECEIVING DOPPLER WEATHER INFORMATION
Doppler weather radar information can
be received via HD Radio broadcast or
by the LEXUS App Suite application on
a Bluetooth® phone. For details about
the LEXUS App Suite application:
P.325
4 Check that the “Weather” screen is displayed.
DISPLAYING DOPPLER
WEATHER INFORMATION
1 Press the “MENU” button on the
Remote Touch.
No.
Function
Select to display the weather of the
current location. (P.277)
Select to display the weather of a desired location in the recently
checked locations list.
Select to display the weather of a desired location in the national cities
list.
2 Select “Info”.
3 Select “Weather”.
Select to display the weather of a desired location in the other local cities
list.
Select to display Doppler weather
radar information over the map.
276
LX_Navi_OM60N29U_(U)
15.07.31 14:52
1. INFORMATION DISPLAY
DISPLAYING THE WEATHER
OF THE CURRENT LOCATION
1 Display the “Weather” screen.
(P.276)
2 Select “Current Weather”.
3 Select the desired tab to be displayed.
 When the “3 Day” tab is selected: When a
specific day is selected, weather information for that day will be displayed.
6
INFORMATION
277
LX_Navi_OM60N29U_(U)
15.07.31 14:52
1. INFORMATION DISPLAY
2. DATA SERVICES SETTINGS
SETTING DOWNLOAD
METHODS
Data service information, which is comprised of traffic information and weather
information, can be received via HD Radio broadcast and by the LEXUS App
Suite application on a Bluetooth®
phone. The receiving method can be set
to both or only via HD Radio broadcast.
For details about the LEXUS App Suite
application: P.325
1 Press the “MENU” button on the
Remote Touch.
4 Select the desired item to be set.
No.
Function
Select to receive data service information via both HD Radio broadcast
and the LEXUS App Suite application on a Bluetooth® phone. When
both methods are available, HD Radio broadcast will be selected.
Select to receive data only via HD
Radio broadcast.
2 Select “Setup”.
3 Select “Data Services”.
278
LX_Navi_OM60N29U_(U)
15.07.31 14:52
7
1
PHONE
2
1
PHONE OPERATION (HANDSFREE SYSTEM FOR CELLULAR
PHONES)
1. QUICK REFERENCE ........................... 280
4. RECEIVING ON THE Bluetooth®
PHONE..................................................... 291 3
INCOMING CALLS.............................................. 291
4
5. TALKING ON THE Bluetooth®
PHONE.................................................... 292
2. SOME BASICS ......................................... 281
INCOMING CALL WAITING....................... 294
REGISTERING/CONNECTING A
Bluetooth® PHONE.......................................... 282
6. Bluetooth® PHONE MESSAGE
FUNCTION............................................ 295
USING THE PHONE
SWITCH/MICROPHONE ........................... 282
RECEIVING A MESSAGE ............................... 296
VOICE COMMAND SYSTEM...................... 283
ABOUT THE CONTACTS IN THE
CONTACT LIST ................................................. 284
WHEN SELLING OR DISPOSING OF
THE VEHICLE ..................................................... 284
3. CALLING ON THE Bluetooth®
PHONE.................................................... 285
6
CHECKING MESSAGES.................................. 297
REPLYING TO A
MESSAGE (QUICK REPLY) ....................... 298
7
CALLING THE MESSAGE SENDER ......... 299
8
2 SETUP
1. PHONE SETTINGS................................ 300 9
BY FAVORITES LIST ........................................... 286
“Sounds” SCREEN ................................................... 301
BY CALL HISTORY ............................................. 286
“Contacts/Call History” SCREEN .................. 302
BY CONTACTS LIST ........................................... 287
“Messaging” SCREEN.......................................... 309
BY DIAL PAD .......................................................... 289
“Notifications” SCREEN ........................................ 310
BY OFF HOOK SWITCH ................................. 290
5
3 WHAT TO DO IF...
1. TROUBLESHOOTING ......................... 312
279
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
1. QUICK REFERENCE
The phone top screen can be reached by the following methods:
Using the steering wheel switches
Press the
switch on the steering wheel.
From the “Menu” screen
Press the “MENU” button on the Remote Touch, then select “Phone”.
Function
Page
Registering/connecting Bluetooth® device
®
Phone operation
Message function
Setting up a phone
40
Calling on the Bluetooth phone
285
Receiving on the Bluetooth® phone
291
Talking on the Bluetooth® phone
292
®
Using the Bluetooth phone message function
295
Phone settings
300
Bluetooth® settings
46
280
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
2. SOME BASICS
The hands-free system enables calls to
be made and received without having to
take your hands off the steering wheel.
Bluetooth®.
This system supports
Bluetooth® is a wireless data system
that enables cellular phones to be used
without being connected by a cable or
placed in a cradle.
The operating procedure of the phone is
explained here.
WARNING
●Do not leave your cellular phone in the
vehicle. The temperature inside may rise
to a level that could damage the phone.
INFORMATION
●If your cellular phone does not support
Bluetooth®, this system cannot function.
●In the following conditions, the system
may not function:
• The cellular phone is turned off.
• The current position is outside the communication area.
• The cellular phone is not connected.
• The cellular phone has a low battery.
●When using Bluetooth® audio and
hands-free system at the same time, the
following problems may occur:
• The Bluetooth® connection may be cut.
• Noise may be heard on the Bluetooth®
audio playback.
281
LX_Navi_OM60N29U_(U)
15.07.30 20:43
7
PHONE
●While driving, do not use a cellular phone
or connect the Bluetooth® phone.
●Your audio unit is fitted with Bluetooth®
antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable
cardioverter defibrillators should maintain a reasonable distance between
themselves and the Bluetooth® antennas.
The radio waves may affect the operation
of such devices.
●Before using Bluetooth® devices, users
of any electrical medical device other
than implantable cardiac pacemakers,
cardiac resynchronization therapy-pacemakers or implantable cardioverter
defibrillators should consult the manufacturer of the device for information about
its operation under the influence of radio
waves. Radio waves could have unexpected effects on the operation of such
medical devices.
NOTICE
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
REGISTERING/
CONNECTING A Bluetooth®
PHONE
To use the hands-free system for cellular
phones, it is necessary to register a cellular phone with the system. (P.40)
USING THE PHONE SWITCH/
MICROPHONE
Steering switch
By pressing the phone switch, a call can
be received or ended without taking
your hands off the steering wheel.
Bluetooth® PHONE
CONDITION DISPLAY
The condition of the Bluetooth® phone
appears on the upper right side of the
screen. (P.16)
Volume control switch
 Press the “+” switch to increase the volume.
 Press the “-” switch to decrease the volume.
Off hook switch
On hook switch
282
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
Microphone
The microphone is used when talking on
the phone.
VOICE COMMAND SYSTEM
Press this switch to operate the voice
command system.
INFORMATION
 The voice command system and its list of
commands can be operated. (P.258)
283
LX_Navi_OM60N29U_(U)
15.07.30 20:43
7
PHONE
●The other party’s voice will be heard from
the front speakers. The audio/visual system will be muted during phone calls or
when hands-free voice commands are
used.
●Talk alternately with the other party on
the phone. If both parties speak at the
same time, the other party may not hear
what has been said. (This is not a malfunction.)
●Keep call volume down. Otherwise, the
other party’s voice may be audible outside the vehicle and voice echo may
increase. When talking on the phone,
speak clearly towards the microphone.
●The other party may not hear you clearly
when:
• Driving on an unpaved road. (Making
excessive traffic noise.)
• Driving at high speeds.
• The roof or windows are open.
• The air conditioning vents are pointed
towards the microphone.
• The sound of the air conditioning fan is
loud.
• There is a negative effect on sound
quality due to the phone and/or network
being used.
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
ABOUT THE CONTACTS IN
THE CONTACT LIST
 The following data is stored for every registered phone. When another phone is connected, the following registered data
cannot be read:
• Contact data
• Call history data
• Favorites data
• Image data
• All phone settings
• Message settings
INFORMATION
●When a phone’s registration is deleted,
the above-mentioned data is also
deleted.
WHEN SELLING OR
DISPOSING OF THE VEHICLE
A lot of personal data is registered when
the hands-free system is used. When
selling or disposing of the vehicle, initialize the data. (P.62)
 The following data in the system can be initialized:
• Contact data
• Call history data
• Favorites data
• Image data
• All phone settings
• Message settings
INFORMATION
●Once initialized, the data and settings will
be erased. Pay much attention when initializing the data.
284
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
3. CALLING ON THE Bluetooth® PHONE
After a Bluetooth® phone has been registered, a call can be made using the
hands-free system. There are several
methods by which a call can be made, as
described below.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the desired tab to call from.
 The phone top screen can be displayed by
pressing the
wheel.
switch on the steering
How to make a call list
Page
286
By call history
286
By contacts list*
287
By dial pad*
289
By e-mail/SMS/MMS
299
By POI call
84
By off hook switch
290
By LEXUS App Suite
337
By voice command system
264
By quick dial
352
*: The operation cannot be performed while
driving.
285
LX_Navi_OM60N29U_(U)
15.07.30 20:43
7
PHONE
By favorites list
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
BY FAVORITES LIST
BY CALL HISTORY
Calls can be made using registered contacts which can be selected from a contact list. (P.307)
Up to 30 of the latest call history items
(missed, incoming and outgoing) can be
selected from the “Call History” tab.
1 Display the phone top screen.
1 Display the phone top screen.
2 Select the “Favorites” tab and select the
2 Select the “Call History” tab and select
3 Select the desired number.
4 Check that the “Call” screen is dis-
 The icons of call type are displayed.
(P.285)
desired contact.
played.
(P.285)
or the desired contact.
: Missed call
: Incoming call
: Outgoing call
When
is selected
3 Check that the “Call” screen is dis-
played.
When the desired contact is selected
3 Select the desired number.
4 Check that the “Call” screen is displayed.
286
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
INFORMATION
●When making a call to the same number
continuously, only the most recent call is
listed in call history.
●When a phone number registered in the
contact list is received, the name is displayed.
●Number-withheld calls are also memorized in the system.
●International phone calls may not be
made depending on the type of cellular
phone you have.
●The list should group together consecutive entries with the same phone number
and same call type. For example, two calls
from John’s mobile would be displayed as
follows: John (2)
●By pressing the
switch on the steering wheel, a call to the latest history item
can be made.
BY CONTACTS LIST
Calls can be made by using contact data
which is transferred from a registered
cellular phone. (P.288)
Up to 2500 contacts (maximum of 4
phone numbers and e-mail addresses
per contact) can be registered in the
contact list.
1 Display the phone top screen.
(P.285)
2 Select the “Contacts” tab and select the
desired contact.
3 Select the desired number.
4 Check that the “Call” screen is displayed.
7
PHONE
287
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
WHEN THE CONTACT IS
EMPTY
■ FOR
PBAP
COMPATIBLE
®
Bluetooth PHONES
When “Automatic Transfer” is set to on
(P.302)
■ FOR PBAP INCOMPATIBLE BUT
OPP COMPATIBLE Bluetooth®
PHONES
1 Select the desired item.
 Contacts are transferred automatically.
When “Automatic Transfer” is set to off
(P.302)
1 Select the desired item.
No.
Function
Select to transfer the contacts from
the connected cellular phone.
Select to add a new contact manually.
Select to cancel transferring.
No.
Function
Select to always transfer all the contacts from a connected cellular
phone automatically.
Select to transfer all the contacts
from a connected cellular phone
only once.
Select to cancel transferring.
2 Check that a confirmation screen is displayed when the operation is complete.
288
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
When “Transfer” is selected
2 Follow the steps in “When the contact
is not registered” from “STEP 2”.
(P.304)
When “Add” is selected
2 Follow the steps in “REGISTERING A
NEW CONTACT TO THE CONTACTS LIST” from “STEP 2”.
(P.306)
INFORMATION
1 Display the phone top screen.
(P.285)
2 Select the “Dial Pad” tab and enter the
phone number.
3 Select
or press the
the steering wheel.
switch on
4 Check that the “Call” screen is displayed.
INFORMATION
●Depending on the type of Bluetooth®
phone being connected, it may be necessary to perform additional steps on the
phone.
7
PHONE
●If your cellular phone is neither PBAP nor
OPP compatible, the contacts cannot be
transferred.
●Depending on the type of Bluetooth®
phone:
• It may be necessary to perform additional steps on the phone when transferring contact data.
• The registered image in the contact list
may not transfer depending on the type
of Bluetooth® phone connected.
BY DIAL PAD
289
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
BY OFF HOOK SWITCH
Calls can be made using the latest call
history item.
1 Press the
switch on the steering
wheel to display the phone top screen.
2 Press the
switch on the steering
wheel to display the “Call History”
screen.
3 Press the
switch on the steering
wheel to call the latest history item.
4 Check that the “Call” screen is displayed.
290
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
4. RECEIVING ON THE Bluetooth® PHONE
INCOMING CALLS
When a call is received, this screen is
displayed with a sound.
This screen can also be displayed on the
side display. (P.349)
1 Select
or press the
switch on
the steering wheel to talk on the phone.
INFORMATION
●During international phone calls, the
other party’s name or number may not be
displayed correctly depending on the
type of cellular phone you have.
●The ringtone that has been set in the
“Sounds” screen sounds when there is an
incoming call. Depending on the type of
Bluetooth® phone, both the system and
Bluetooth®
phone
may
sound
simultaneously when there is an incoming
call. (P.301)
●The incoming call display mode can be
set. (P.310)
7
To refuse to receive the call: Select
PHONE
or press the
switch on the steering
wheel.
To adjust the volume of a received call:
Turn the “PWR·VOL” knob, or use the volume control switch on the steering wheel.
291
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
5. TALKING ON THE Bluetooth® PHONE
While talking on the phone, this screen is
displayed. The operations outlined below can be performed on this screen.
This screen can also be displayed on the
side display. (P.349)
No.
Function
Page
Select to display the dial
pad to send tones.
293
Select to mute your voice to
the other party.

Select to change handset
modes between hands-free
and cellular phone.

Select to adjust your voice
volume that the other party
hears from their speaker.
294
Select to send tones. This
button only appears when a
number that contains a (w)
is dialed in hands-free
mode.
293
Select to hang up the
phone.

Select “+” or “-” to adjust
the volume of the other party’s voice.

Select to start talking with
the other party.
294
INFORMATION
●When cellular phone call is changed to
hands-free call, the hands-free screen will
be displayed and its functions can be
operated on the screen.
●Changing between cellular phone call
and hands-free call can be performed by
operating the cellular phone directly.
●Transferring methods and operations will
be different depending on the type of cellular phone you have.
●For the operation of the cellular phone,
see the manual that comes with it.
●This screen can be displayed on the main
display or side display. (P.310)
292
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
SENDING TONES
■ BY DIAL PAD
This operation cannot be performed
while driving.
1 Select “0-9”.
2 Enter the desired number.
■ BY SELECTING “Release Tones”
“Release Tones” appear when a continuous tone signal(s) containing a (w) is
registered in the contact list.
1 Select “Release Tones”.
INFORMATION
●A continuous tone signal is a character
string that consists of numbers and the
characters
p
or
w.
(e.g.
056133w0123p#1)
●When the “p” pause tone is used, the tone
data up until the next pause tone will be
automatically sent after 2 seconds have
elapsed. When the “w” pause tone is
used, the tone data up until the next
pause tone will be automatically sent
after a user operation is performed.
●Release tones can be used when automated operation of a phone based service such as an answering machine or
bank phone service is desired. A phone
number with continuous tone signals can
be registered in the contact list.
●Tone data after a “w” pause tone can be
operated on voice command during a
call.
7
PHONE
293
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
TRANSMIT VOLUME SETTING
1 Select “Transmit Volume”.
2 Select the desired level for the transmit
volume.
“Default”: Select to reset the transmit volume.
3 Select “OK”.
INFORMATION
●The sound quality of the voice heard from
the other party’s speaker may be negatively impacted.
●“Transmit Volume” is dimmed when mute
is on.
INCOMING CALL WAITING
When a call is interrupted by a third party while talking, the incoming screen is
displayed.
The incoming screen can also be displayed on the side display. (P.349)
1 Select
or press the
switch on
the steering wheel to start talking with
the other party.
To refuse to receive the call: Select
or press the
wheel.
switch on the steering
 Each time
is selected or the
switch on the steering wheel is pressed
during an interrupted call, the party who is
on hold will be switched.
INFORMATION
●This function may not be available
depending on the type of cellular phone.
●This screen can be displayed on the main
display or side display. (P.310)
294
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
6. Bluetooth® PHONE MESSAGE FUNCTION
Received messages can be forwarded
from the connected Bluetooth® phone,
enabling checking and replying using
the system.
Depending on the type of Bluetooth®
phone connected, received messages
may not be transferred to the message
inbox.
If the phone does not support the message function, this function cannot be
used.
1 Press the “MENU” button on the
Remote Touch.
3 Select
.
 The phone top screen can be displayed by
pressing the
wheel.
switch on the steering
4 Check that the message inbox screen is
displayed.
: Select to change to phone mode.
Function
Page
Receiving a message
296
Checking messages
297
Replying to a message (quick reply)
298
Calling the message sender
299
Message settings
309
7
PHONE
2 Select “Phone”.
295
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
RECEIVING A MESSAGE
When an e-mail/SMS/MMS is received, the incoming message screen
pops up with sound and is ready to be
operated on the screen.
INFORMATION
●Depending on the cellular phone used for
receiving messages, or its registration
status with the system, some information
may not be displayed.
●The pop up screen is separately available
for incoming e-mail and SMS/MMS messages under the following conditions:
E-mail:
• “E-mail Notification Popup” is set to on.
(P.310)
SMS/MMS:
• “SMS/MMS Notification Popup” is set
to on. (P.310)
No.
Function
Select to check the message.
Select to not open the message.
Select to call the message sender.
296
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
CHECKING MESSAGES
1 Display the message inbox screen.
(P.295)
2 Select the desired message from the list.
3 Check that the message is displayed.
No.
Function
●Depending on the type of Bluetooth®
phone being connected, it may be
necessary to perform additional steps on
the phone.
●Messages are displayed in the
appropriate connected Bluetooth®
phone’s registered mail address folder.
Select the tab of the desired folder to be
displayed.
●Only received messages on the
connected Bluetooth® phone can be
displayed.
●The text of the message is not displayed
while driving.
●Turn the “PWR·VOL” knob, or use the
volume control switch on the steering
wheel to adjust the message read out
volume.
7
PHONE
Select “Mark Unread” or “Mark
Read” to mark e-mail unread or read
on the message inbox screen.
This function is available when “Update Message Read Status on
Phone” is set to on. (P.309)
INFORMATION
Select to reply the message.
(P.298)
Select to display the previous or next
message.
Select to have messages read out.
To cancel this function, select “Stop”.
When “Automatic Message Readout” is set to on, messages will be automatically read out. (P.309)
Select to make a call to the sender.
297
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
REPLYING TO A MESSAGE
(QUICK REPLY)
■ EDITING QUICK REPLY MESSAGES
15 messages have already been stored.
This operation cannot be performed
while driving.
1 Display the message inbox screen.
1 Select “Quick Msg”.
2
3
4
5
2 Select
(P.295)
Select the desired message from the list.
Select “Quick Msg”.
Select the desired message.
Select “Send”.
“Cancel”: Select to cancel sending the
message.
 While the message is being sent, a sending
message screen is displayed.
6 Check that a confirmation screen is displayed when the operation is complete.
 If an error message is displayed, follow the
guidance on the screen to try again.
corresponding to the desired message to edit.
3 Select “OK” when editing is completed.
INFORMATION
●To reset the edited quick reply messages,
select “Default”.
●“Quick Message 1” (“I am driving and
will arrive in approximately [ETA]
minutes.”):
This message cannot be edited and will
automatically fill in [ETA] with the
navigation calculated estimated time of
arrival on the confirm message screen.
If there are waypoints set, [ETA] to the
next waypoint will be shown.
If there is no route currently set in the
navigation system, “Quick Message 1”
cannot be selected.
298
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
CALLING THE MESSAGE
SENDER
Calls can be made to an e-mail/SMS/
MMS message sender’s phone number.
This operation can be performed while
driving.
■ CALLING FROM E-MAIL/SMS/
MMS MESSAGE DISPLAY
1 Display the message inbox screen.
(P.295)
■ CALLING FROM A NUMBER
WITHIN A MESSAGE
Calls can be made to a number identified in a message’s text area.
This operation cannot be performed
while driving.
1 Display the message inbox screen.
(P.295)
2 Select the desired message.
3 Select the text area.
2 Select the desired message.
3 Select “Call”.
 If there are 2 or more phone numbers,
select the desired number.
7
4 Check that the “Call” screen is dis4 Select the desired number.
 Identified phone numbers contained in the
message are displayed.
5 Check that the “Call” screen is displayed.
INFORMATION
●A series of numbers may be recognized
as a phone number. Additionally, some
phone numbers may not be recognized,
such as those for other countries.
■ CALLING FROM THE INCOMING
MESSAGE SCREEN
P.296
299
LX_Navi_OM60N29U_(U)
15.07.30 20:43
PHONE
played.
2. SETUP
1. PHONE SETTINGS
1 Press the “MENU” button on the
Remote Touch.
4 Select the item to be set.
No.
2 Select “Setup”.
3 Select “Phone”.
Information
Page
Registering/connecting a
phone
46
*
Sound settings
301
*
Contact/call history settings
302
*
Message settings
309
*
Notification settings
310
*: This operation cannot be performed while
driving.
DISPLAYING THE PHONE
SETTINGS SCREEN IN A
DIFFERENT WAY
1 Display the phone top screen.
(P.285)
2 Select “Settings”.
300
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. SETUP
“Sounds” SCREEN
The call and ringtone volume can be adjusted. A ringtone can be selected.
1 Display the “Phone Settings” screen.
(P.300)
2 Select “Sounds”.
3 Select the desired item to be set.
No.
Function
Select to set the desired ringtone.
Select “-” or “+” to adjust the ringtone volume.
Select “-” or “+” to adjust the default
volume of the other party’s voice.
Select to set the desired incoming
SMS/MMS tone.
Select “-” or “+” to adjust the incoming SMS/MMS tone volume.
Select to set the desired incoming email tone.
Select “-” or “+” to adjust the incoming e-mail tone volume.
Select “-” or “+” to adjust the message readout volume.
PHONE
Select to reset all setup items.
INFORMATION
●Depending on the type of phone, certain
functions may not be available.
301
LX_Navi_OM60N29U_(U)
15.07.30 20:43
7
2. SETUP
“Contacts/Call History”
SCREEN
No.
Function
Page
For PBAP compatible
Bluetooth® phones: Select
to change the contact/history transfer settings.
303
Select to update contacts
from the connected phone.
304
Select to sort contacts by
the first name or last name
field.

Select to add contacts to
the favorites list.
307
Select to delete contacts
from the favorites list.
308
*
Select to clear contacts
from the call history.

*
Select to add new contacts
to the contact list.
306
*
Select to edit contacts in
the contact list.
306
The contact can be transferred from a
Bluetooth® phone to the system. If your
cellular phone is neither PBAP nor OPP
compatible, the contacts cannot be
transferred.
The contact also can be added, edited
and deleted.
The call history can be deleted and contact and favorites can be changed.
1 Display the “Phone Settings” screen.
(P.300)
2 Select “Contacts/Call History”.
3 Select the desired item to be set.
*: For PBAP compatible Bluetooth®
phones, this function is available when
“Automatic Transfer” is set to off.
(P.302)
302
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. SETUP
No.
*
Function
Page
Select to delete contacts
from the contact list.
307
Select to reset all setup
items.

*: For PBAP compatible Bluetooth®
phones, this function is available when
“Automatic Transfer” is set to off.
(P.302)
SETTING AUTOMATIC
CONTACT/HISTORY
TRANSFER
The automatic contact/history transfer
function is available for PBAP compatible Bluetooth® phones only.
1 Select “Automatic Transfer”.
2 Select the desired item to be set.
INFORMATION
●Depending on the type of phone, certain
functions may not be available.
●Contact data is managed independently
for every registered phone. When one
phone is connected, another phone’s registered data cannot be read.
No.
7
Function
Select to update contacts from the
connected phone. (P.304)
Select to set the transferred contact
image display on/off.
The contact image cannot be displayed on the side display when a call
is received.
Select to reset all setup items.
303
LX_Navi_OM60N29U_(U)
15.07.30 20:43
PHONE
Select to set automatic contact/history transfer on/off. When set to on,
the phone’s contact data and history
are automatically transferred.
2. SETUP
■ UPDATING CONTACTS FROM
PHONE
1 Select “Update Now”.
TRANSFER CONTACTS FROM
PHONE
When the contact is not registered
 Contacts are transferred automatically.
2 Check that a confirmation screen is displayed when the operation is complete.
 This operation may be unnecessary
depending on the type of cellular phone.
 Depending on the type of cellular phone,
OBEX authentication may be required
when transferring contact data. Enter
“1234” into the Bluetooth® phone.
 If another Bluetooth® device is connected
when transferring contact data, depending
on the phone, the connected Bluetooth®
device may need to be disconnected.
®
 Depending on the type of Bluetooth
phone being connected, it may be necessary to perform additional steps on the
phone.
1 Select
“Transfer
Contacts
from
Phone”.
2 Transfer the contact data to the system
using a Bluetooth® phone.
 This operation may be unnecessary
depending on the type of cellular phone.
 Depending on the type of cellular phone,
OBEX authentication may be required
when transferring contact data. Enter
“1234” into the Bluetooth® phone.
 To cancel this function, select “Cancel”.
3 Check that a confirmation screen is displayed when the operation is complete.
304
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. SETUP
When the contact is registered
1 Select
“Transfer
Contacts
from
Phone”.
2 Select “Replace Contacts” or “Add
Contact”.
“Replace Contacts”: Select to transfer the
contact from the connected cellular phone
and replace the current one.
“Add Contact”: Select to transfer the desired contact data from the connected cellular phone to add to the current one.
3 Transfer the contact data to the system
using a Bluetooth® phone.
■ UPDATING THE CONTACTS
(FROM THE “Call History”
SCREEN)
1 Display the phone top screen.
(P.285)
2 Select the “Call History” tab and select
a contact not yet registered in the contact list.
3 Select “Update Contact”.
4 Select the desired contact.
5 Select a phone type for the phone number.
 This operation may be unnecessary
depending on the type of cellular phone.
 Depending on the type of cellular phone,
OBEX authentication may be required
when transferring contact data. Enter
“1234” into the Bluetooth® phone.
 To cancel this function, select “Cancel”.
7
PHONE
4 Check that a confirmation screen is displayed when the operation is complete.
305
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. SETUP
REGISTERING A NEW
CONTACT TO THE
CONTACTS LIST
New contact data can be registered.
Up to 4 numbers per person can be registered.
1 Select “New Contact”.
2 Enter the name and select “OK”.
3 Enter the phone number and select
“OK”.
4 Select the phone type for the phone
number.
EDITING THE CONTACT
DATA
1 Select “Edit Contact”.
2 Select the desired contact.
3 Select the desired name or number.
For editing the name
4 Follow the steps in “REGISTERING A
NEW CONTACT TO THE CONTACTS LIST” from “STEP 2”.
(P.306)
For editing the number
4 Follow the steps in “REGISTERING A
5 To add another number to this contact,
NEW CONTACT TO THE CONTACTS LIST” from “STEP 3”.
(P.306)
■ REGISTERING A NEW CONTACT
IN A DIFFERENT WAY (FROM THE
“Call History” SCREEN)
■ EDITING THE CONTACT IN A DIFFERENT WAY (FROM THE “Contact Details” SCREEN)
1 Display the phone top screen.
1 Display the phone top screen.
select “Yes”.
(P.285)
2 Select the “Call History” tab and select
a contact not yet registered in the contact list.
3 Select “Add to Contacts”.
4 Follow the steps in “REGISTERING A
NEW CONTACT TO THE CONTACTS LIST” from “STEP 2”.
(P.306)
(P.285)
2 Select the “Contacts”, “Call History” or
“Favorites” tab and select the desired
contact.
3 Select “Edit Contact”.
“E-mail Addresses”: Select to display all
registered e-mail addresses for the contact.
4 Follow the steps in “EDITING THE
CONTACT DATA” from “STEP 3”.
(P.306)
306
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. SETUP
DELETING THE CONTACT
DATA
FAVORITES LIST SETTING
1 Select “Delete Contacts”.
2 Select the desired contact and select
Up to 15 contacts (maximum of 4 numbers per contact) can be registered in
the favorites list.
3 Select “Yes” when the confirmation
■ REGISTERING THE CONTACTS
IN THE FAVORITES LIST
“Delete”.
screen appears.
INFORMATION
●Multiple data can be selected and
deleted at the same time.
■ DELETING THE CONTACT IN A
DIFFERENT WAY (FROM THE
“Contact Details” SCREEN)
1 Display the phone top screen.
(P.285)
“Favorites” tab and select the desired
contact.
3 Select “Delete Contact”.
4 Select “Yes” when the confirmation
screen appears.
favorites list.
 Dimmed contacts are already stored as a
favorite.
3 Check that a confirmation screen is dis-
played when the operation is complete.
When 15 contacts have already been
registered to the favorites list
7
1 When 15 contacts have already been
registered to the favorites list, a registered contact needs to be replaced.
Select “Yes” when the confirmation
screen appears to replace a contact.
PHONE
2 Select the “Contacts”, “Call History” or
1 Select “Add Favorite”.
2 Select the desired contact to add to the
2 Select the contact to be replaced.
3 Check that a confirmation screen is displayed when the operation is complete.
INFORMATION
●When a Bluetooth® phone is deleted, the
contact data will be deleted at the same
time.
307
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. SETUP
Registering contacts in the favorites list in
a different way (from the “Contacts”
screen)
1 Display the phone top screen.
(P.285)
2 Select the “Contacts” tab.
3 Select (grey) at the beginning of the
desired contact list name to be registered in the favorites list.
■ DELETING THE CONTACTS IN
THE FAVORITES LIST
1 Select “Remove Favorite”.
2 Select the desired contacts and select
“Remove”.
3 Select “Yes” when the confirmation
screen appears.
4 Check that a confirmation screen is dis-
played when the operation is complete.
Deleting contacts in the favorites list in a
different way (from the “Contacts”
screen)
1 Display the phone top screen.
(P.285)
 When selected, (grey) is changed to
(yellow), and the contact is registered in
the favorites list.
Registering contacts in the favorites list in
a different way (from the “Contact Details” screen)
1 Display the phone top screen.
2 Select the “Contacts” tab.
3 Select (yellow) at the beginning of the
contact list name to be deleted from the
favorites list.
 When selected, (yellow) is changed to
(grey), and the data is deleted from the
list.
(P.285)
2 Select the “Contacts” or “Call History”
tab and select the desired contact.
3 Select “Add Favorite”.
4 Check that a confirmation screen is displayed when the operation is complete.
308
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. SETUP
Deleting contacts in the favorites list in a
different way (from the “Contact Details”
screen)
1 Display the phone top screen.
(P.285)
2 Select the “Contacts”, “Call History” or
“Favorites” tab and select the desired
contact to delete.
“Messaging” SCREEN
1 Display the “Phone Settings” screen.
(P.300)
2 Select “Messaging”.
3 Select the desired item to be set.
3 Select “Remove Favorite”.
4 Select “Yes” when the confirmation
screen appears.
5 Check that a confirmation screen is displayed when the operation is complete.
No.
Function
Select to set automatic message
transfer on/off.
Select to set updating message read
status on phone on/off.
Select to set display of messaging account names on the inbox tab on/off.
When set to on, messaging account
names used on the cellular phone will
be displayed.
Select to set adding the vehicle signature to outgoing messages on/off.
Select to reset all setup items.
309
LX_Navi_OM60N29U_(U)
15.07.30 20:43
PHONE
Select to set automatic message readout on/off.
7
2. SETUP
INFORMATION
●Depending on the phone, these functions
may not be available.
“Notifications” SCREEN
1 Display the “Phone Settings” screen.
(P.300)
2 Select “Notifications”.
3 Select the desired item to be set.
310
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. SETUP
No.
Function
Select to change where the screen is
displayed between the main display
and side display.
“Main Screen”: Select to display and
operate the screen on the main display.
“Side Screen”: Select to display and
operate the screen on the side display. For details of the screen:
P.353
Select to set the SMS/MMS notification popup on/off.
Select to set the e-mail notification
popup on/off.
Function
Select to change the incoming email display.
“Full Screen”: When an e-mail is received, the incoming e-mail display
screen is the displayed and can be
operated on the screen.
“Drop-Down”: When an e-mail is received, a message is displayed on
the upper side of the screen.
Select to set display of the contact/
history transfer completion message
on/off.
Select to reset all setup items.
INFORMATION
●Depending on the phone, these functions
may not be available.
7
PHONE
Select to change the incoming SMS/
MMS display.
“Full Screen”: When an SMS/MMS
message is received, the incoming
SMS/MMS display screen is displayed and can be operated on the
screen.
“Drop-Down”: When an SMS/
MMS message is received, a message is displayed on the upper side
of the screen.
No.
311
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. WHAT TO DO IF...
1. TROUBLESHOOTING
If there is a problem with the hands-free system or a Bluetooth® device, first check the
table below.
When using the hands-free system with a Bluetooth® device
Page
Symptom
The hands-free system or Bluetooth®
device does not
work.
Likely cause
Solution
Cellular
phone
This
system
The connected device may not be a
compatible
Bluetooth® cellular
phone.
For a list of specific
devices
which
operation has been
confirmed on this
system, check with
your Lexus dealer or
the
following
website:
http://
www.lexus.com/
MobileLink


The Bluetooth® version of the connected
cellular phone may
be older than the
specified version.
Use a cellular phone
with Bluetooth® version 2.0 or higher
(recommended: Ver.
3.0 +EDR or higher).

44
312
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. WHAT TO DO IF...
When registering/connecting a cellular phone
Page
Symptom
A cellular phone cannot be registered.
Likely cause
Solution
An incorrect passcode was entered on
the cellular phone.
Cellular
phone
This
system
Enter the correct
passcode on the cellular phone.


The registration operation has not been
completed on the
cellular phone side.
Complete the registration operation on
the cellular phone
(approve registration
on the phone).


Old registration information remains on
either this system or
the cellular phone.
Delete the existing
registration information from both this
system and the cellular phone, then register the cellular phone
you wish to connect
to this system.

49
7
PHONE
313
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. WHAT TO DO IF...
Page
Symptom
A Bluetooth® connection cannot be
made.
Likely cause
Solution
Another Bluetooth®
device is already
connected.
Cellular
phone
This
system
Manually connect
the cellular phone
you wish to use to this
system.

49
Bluetooth® function
is not enabled on the
cellular phone.
Enable
the
Bluetooth® function
on the cellular phone.


Automatic
Bluetooth® connection on this system is
set to off.
Set
automatic
Bluetooth® connection on this system to
on when the engine
switch is in ACCESSORY or IGNITION ON mode.

54
Set preferred device
settings function on
this system to off.

54
Set the desired cellular phone to the highest
automatic
connection priority.

54
Preferred device settings function on this
system is set to on.
314
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. WHAT TO DO IF...
Page
Symptom
“Unable to dial.
Please check your
phone.” message is
displayed.
Likely cause
Solution
Bluetooth® function
is not enabled on the
cellular phone.
Old registration information remains on
either this system or
the cellular phone.
Cellular
phone
This
system
Enable
the
Bluetooth® function
on the cellular phone.


Delete the existing
registration information from both this
system and the cellular phone, then register the cellular phone
you wish to connect
to this system.

49
When making/receiving a call
Page
Likely cause
Solution
A call cannot be
made/received.
Your vehicle is in a
“No Service” area.
Move to where “No
Service” no longer
appears on the display.
Cellular
phone
This
system


315
LX_Navi_OM60N29U_(U)
15.07.30 20:43
7
PHONE
Symptom
3. WHAT TO DO IF...
When using the phonebook
Page
Symptom
Phonebook
data
cannot be transferred manually/automatically.
Phonebook
data
cannot be edited.
Likely cause
Solution
Cellular
phone
This
system
The profile version of
the connected cellular phone may not be
compatible
with
transferring phonebook data.
For a list of specific
devices
which
operation has been
confirmed on this
system, check with
your Lexus dealer or
the
following
website:
http://
www.lexus.com/
MobileLink


Automatic contact
transfer function on
this system is set to
off.
Set automatic contact transfer function
on this system to on.

302
Passcode has not
been entered on the
cellular phone.
Enter the passcode
on the cellular phone
if requested (default
passcode: 1234).


Transfer operation
on the cellular phone
has not completed.
Complete transfer
operation on the cellular phone (approve
transfer operation on
the phone).


Automatic contact
transfer function on
this system is set to
on.
Set automatic contact transfer function
on this system to off.

302
316
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. WHAT TO DO IF...
When using the Bluetooth® message function
Page
Symptom
Messages cannot be
viewed.
New message notifications are not displayed.
Likely cause
Solution
Message transfer is
not enabled on the
cellular phone.
Cellular
phone
This
system
Enable
message
transfer on the cellular phone (approve
message transfer on
the phone).


Automatic transfer
function on this system is set to off.
Set automatic transfer function on this
system to on.

309
Notification of SMS/
MMS/E-mail reception on this system is
set to off.
Set notification of
SMS/MMS/E-mail
reception on this system to on.

310
Automatic message
transfer function is
not enabled on the
cellular phone.
Enable
automatic
transfer function on
the cellular phone.
7


PHONE
In other situations
Page
Symptom
Likely cause
Solution
The Bluetooth® connection status is displayed at the top of
the screen each time
the engine switch is in
ACCESSORY or
IGNITION
ON
mode.
Connection confirmation display on this
system is set to on.
To turn off the display, set connection
confirmation display
on this system to off.
Cellular
phone
This
system

53
317
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. WHAT TO DO IF...
Page
Symptom
Likely cause
Solution
The cellular phone is
not close enough to
this system.
Radio interference
has occurred.
Even though all conceivable measures
have been taken, the
symptom status does
not change.
The cellular phone is
the most likely cause
of the symptom.
Cellular
phone
This
system
Bring the cellular
phone closer to this
system.


Turn off Wi-Fi® devices or other devices that may emit
radio waves.


Turn the cellular
phone off, remove
and reinstall the battery pack, and then
restart the cellular
phone.


Enable the cellular
phone’s Bluetooth®
connection.


Disable the Wi-Fi®
connection of the
cellular phone.


Stop the cellular
phone’s security software and close all applications.


Before using an application installed on
the cellular phone,
carefully check its
source and how its
operation might affect this system.


: For details, refer to the owner’s manual that came with the cellular phone.
318
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8
1
LEXUS ENFORM
2
1
LEXUS ENFORM-OVERVIEW
1. FUNCTIONAL OVERVIEW............... 320
LEXUS Enform Remote......................................... 321
LEXUS Enform Service Connect ...................... 321
2. TYPE A: FUNCTION ACHIEVED
BY USING A CELLULAR
PHONE.................................................... 322
BEFORE USING THE FUNCTION .............. 324
PREPARATION BEFORE USING
LEXUS App Suite................................................ 325
3. TYPE B: FUNCTION ACHIEVED
BY USING DCM AND THE
NAVIGATION SYSTEM................... 326
BEFORE USING THE FUNCTION .............. 327
4. TYPE C: FUNCTION ACHIEVED
BY USING DCM .................................. 329
2 LEXUS ENFORM OPERATION
3
1. LEXUS Enform Remote......................... 330
2. LEXUS Enform Service Connect ........ 331
3. LEXUS App Suite..................................... 332
USING LEXUS App Suite.................................. 332
LINKING LEXUS App Suite AND
NAVIGATION SYSTEM LOCAL
FUNCTION .......................................................... 336
4
5
6
ENTERING KEYWORD OPERATION...... 337
4. LEXUS Enform Destinations................ 338
7
Destination Assist .................................................... 338
eDestination............................................................... 339
8
5. Lexus Insider .............................................. 342
NEW MESSAGE NOTIFICATION.............. 342
VIEWING AND PLAYING RECEIVED
Lexus Insider MESSAGES.............................. 343
3 SETUP
1. LEXUS App Suite SETTINGS.............. 345
SCREEN FOR LEXUS App Suite
SETTINGS.............................................................. 345
LEXUS Enform connected services consists of five products:
 LEXUS Enform Safety Connect
 LEXUS Enform Service Connect
 LEXUS Enform Remote
 LEXUS Enform Destinations
 LEXUS Enform App Suite
For availability and to learn more, visit http://www.lexus.com/enform/.
319
LX_Navi_OM60N29U_(U)
15.07.30 20:43
9
1. LEXUS ENFORM-OVERVIEW
1. FUNCTIONAL OVERVIEW
Lexus Enform is a service that includes Safety Connect, Service Connect, Remote,
Destinations, Insider and App Suite.
 The functions included in Lexus Enform are classified into the following three types.
Type A: Function achieved by using a cellular phone
Type B: Function achieved by using an embedded cellular device in the vehicle
(DCM: Data Communication Module) and the navigation system
Type C: Function achieved by using DCM
Function
Type
LEXUS App Suite
Type A
LEXUS Enform Destinations
(Destination Assist, eDestination)
Type B
Lexus Insider
Type B
LEXUS Enform Safety Connect
Type C
 Each function is available in the following areas:
• LEXUS App Suite is available in the contiguous United States, Washington D.C. and
Alaska.
• LEXUS Enform Destinations is available in the contiguous United States, Washington
D.C. and limited areas of Alaska for vehicles that contain the appropriate map data.
• Lexus Insider is available in the contiguous United States, Washington D.C. and
Alaska.
• LEXUS Enform Safety Connect features include:
Automatic Collision Notification, Emergency Assistance, Stolen Vehicle Location
(available in the contiguous United States, Washington D.C., Hawaii, Alaska, and
Canada) and Enhanced Roadside Assistance (available in the contiguous United
States, Washington D.C., Alaska, and Canada).
INFORMATION
●Availability of functions of the Lexus Enform service is dependent on network reception
level.
320
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. LEXUS ENFORM-OVERVIEW
LEXUS Enform Remote
LEXUS Enform Remote is a cellular phone application that lets you view and remotely
control certain aspects of your vehicle.
For details about the functions and services of this application, refer to
http://www.lexus.com/enform/.
 Function of the LEXUS Enform Remote is achieved by using an embedded cellular
device in the vehicle (DCM: Data Communication Module).
 Lexus Enform Remote is available in the contiguous United States, Washington D.C.
and Alaska.
LEXUS Enform Service Connect
LEXUS Enform Service Connect uses embedded telematics hardware to collect and
transmit vehicle data that allows Lexus to provide:
 Vehicle Health Report (VHR)
(Safety Recalls, Service Campaigns, Current Vehicle Alerts, Required Maintenance and
Vehicle Condition Status)
 Maintenance Notifications
 Vehicle Alert Notifications
For details about this service and how to register, refer to
http://www.lexus.com/enform/.
321
LX_Navi_OM60N29U_(U)
15.07.30 20:43
LEXUS ENFORM
 The Lexus Enform Service Connect is achieved by using a Data Communication Module (DCM) built into the vehicle.
 Lexus Enform Service Connect is available in the contiguous United States,
Washington D.C., Hawaii, Alaska, and Canada.
8
1. LEXUS ENFORM-OVERVIEW
2. TYPE A: FUNCTION ACHIEVED BY USING A CELLULAR PHONE
Of the functions included with Lexus Enform, the App Suite relies on the use of a cellular phone.
App Suite enables applicable apps installed on a cellular phone to be displayed on and
operated from the navigation screen via a Bluetooth®. A few settings must be performed before App Suite can be used. (P.325)
322
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. LEXUS ENFORM-OVERVIEW
No.
Name
Function
Content provider
Provides contents to the navigation system via a cellular phone.
Application server
Provides applications to the navigation system via a cellular
phone.
Cellular phone*
Using the App Suite, communication is relayed between the
navigation system, application server and contents provider.
The cellular phone cannot be operated while communicating.
Applications
Display usable content from the content providers on the screen
using the data connection of the connected cellular phone.
Navigation system
Content received, via a cellular phone, from content provider
servers is displayed on the navigation screen. The navigation
system is equipped with an application player to run applications.
*: For known compatible phones, refer to http://www.lexus.com/MobileLink.
8
LEXUS ENFORM
323
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. LEXUS ENFORM-OVERVIEW
BEFORE USING THE
FUNCTION
SUBSCRIPTION
 User registration is required to start using
the App Suite function. (P.325)
 App Suite does not require an activation
fee or monthly recurring fees.
 Services requiring a separate contract can
also be used.*
*: For details, refer to
http://www.lexus.com/enform/ or call
1-800-255-3987.
INITIALIZING PERSONAL
DATA
The personal data used in applications
can be reset. (P.62)
 The following personal data can be deleted
and returned to their default settings:
• Downloaded contents
• Radio stations that were listened to
• Input history
INFORMATION
●Once initialized, data will be erased. Pay
close attention when initializing data.
AVAILABILITY OF FUNCTION
 LEXUS App Suite is available in the contiguous United States, Washington D.C. and
Alaska.
INFORMATION
●Data usage fees may apply while using
App Suite function. Confirm data usage
fees before using this function.
●The required operations to activate applications and connect a cellular phone to
the navigation system, and the registration steps for the App Suite are explained
in this section. For details regarding operation of the App Suite and the applications, refer to
http://www.lexus.com/enform/.
●Availability of functions of the Lexus
Enform service is dependent on network
reception level.
324
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. LEXUS ENFORM-OVERVIEW
PREPARATION BEFORE
USING LEXUS App Suite
SETTINGS REQUIRED TO USE
LEXUS App Suite
Perform the settings in the following order.
1 User registration
USER REGISTRATION
Perform user registration at
http://www.lexus.com/enform/ or register
within the App Suite application after you
download it onto your cellular phone.
REGISTERING THE LEXUS App
Suite APPLICATION
1 Download the App Suite application to
2 Download the App Suite application to
your cellular phone.
3 Register the cellular phone with the
navigation system.
In order to use App Suite, the following
must first be performed:
 Register a Bluetooth® phone with the
hands-free system. (P.40)
2 Run the App Suite application on your
cellular phone.
3 Enter the information required into the
App Suite application. Login to the application.
INFORMATION
●Applications can only be used when the
App Suite application has been downloaded to your cellular phone and the
application is running.
●App Suite operational procedures can
also be confirmed by visiting
http://www.lexus.com/enform/.
●In order to use applications, it is necessary to run the App Suite application on
your cellular phone.
●If an iPhone is connected via Bluetooth®
and USB at the same time, system operation may become unstable. For known
phone compatibility information, refer to
http://www.lexus.com/enform/.
●If a App Suite application is used while
iPod audio/video is being played back,
system operation may become unstable.
325
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8
LEXUS ENFORM
 User registration with the service
(P.325)
 Download the App Suite application onto
your cellular phone, and login to the application. (P.325)
 Register the cellular phone, on which the
App Suite application was installed, with
the navigation system. (P.325)
your cellular phone.
1. LEXUS ENFORM-OVERVIEW
3. TYPE B: FUNCTION ACHIEVED BY USING DCM AND THE NAVIGATION SYSTEM
The functionality of Lexus Enform Safety Connect, Lexus Enform Destinations, and
Lexus Insider is made possible through the shared work of the DCM and the navigation system.
These are subscription-based telematics services that use Global Positioning System
(GPS) data and embedded cellular technology to provide safety and security as well
as convenience features.
These services are available by subscription on select, telematics hardware-equipped
vehicles and supported by Lexus’ designated response center, which operates 24
hours a day, 7 days a week.
326
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. LEXUS ENFORM-OVERVIEW
BEFORE USING THE
FUNCTION
SUBSCRIPTION
 After you have signed the Telematics Subscription Service Agreement and are
enrolled, you can begin receiving services.
A variety of subscription terms are available. Contact your Lexus dealer, or call 1800-25-LEXUS (1-800-255-3987), for
further subscription details. (P.338)
AVAILABILITY OF
FUNCTION(S)
 Destinations is available in the contiguous
United States, Washington D.C. and limited
areas of Alaska for vehicles that contain the
appropriate map data.
 Lexus Insider is available in the contiguous
United States, Washington D.C. and
Alaska.
ACTIVATION OF
FUNCTION(S)
 Enrollment in Lexus Enform Safety Connect (via your dealership) is required to
activate all functions.
 Certification for Lexus Enform Safety
Connect
FCC ID: O6Y-CDMRF101
FCC ID: XOECDMRF101B
FCC ID: N7NGTM2
327
LX_Navi_OM60N29U_(U)
15.07.30 20:43
8
LEXUS ENFORM
FCC WARNING
This equipment complies with FCC
radiation exposure limits set forth for an
uncontrolled environment and meets
the FCC radio frequency (RF)
Exposure Guidelines in Supplement C
to OET65.
This equipment should be installed and
operated keeping the radiator at least
20cm or more away from person’s
body (excluding extremities: hands,
wrists, feet and ankles).
1. LEXUS ENFORM-OVERVIEW
INFORMATION
●Exposure to radio frequency signals:
The Lexus Enform system installed in
your vehicle includes a low power radio
transmitter and receiver. The system
receives and also sends out radio frequency (RF) signals.
●In August 1996, the Federal Communications Commission (FCC) adopted RF
exposure guidelines with safety levels for
mobile wireless phones. Those guidelines
are consistent with the safety standards
previously set by both U.S. and international standards bodies.
• ANSI (American National Standards
Institute) C95.1 [1992]
• NCRP (National Council on Radiation
Protection and Measurement) Report
86 [1986]
• ICNIRP (International Commission on
Non-Ionizing Radiation Protection)
[1996]
●These standards are based on comprehensive and periodic evaluations of the
relevant scientific literature. Over 120
scientists, engineers, and physicians from
universities, government health agencies, and industry reviewed the available
body of research to develop the ANSI
Standard (C95.1).
●The design of Lexus Enform system complies with the FCC guidelines in addition
to those standards.
INFORMATION
●Contact with the Lexus response center
is dependent upon the telematics device
being in operative condition, cellular connection availability, navigation map data,
and GPS satellite signal reception, which
can limit the ability to reach the response
center or receive support. Enrollment
and Telematics Subscription Service
Agreement required. A variety of subscription terms are available; charges
vary by subscription term selected.
●The Lexus response center offers support in multiple languages.
●Select Lexus Enform Safety Connectsubscribed vehicles are capable of communicating vehicle information. Please
see the terms and conditions for additional details.
Owners who do not wish to have their
vehicle transmit this information can opt
out at the time of enrollment or by calling
1-800-255-3987 and following the
prompts for Lexus Enform Safety Connect.
●For further details about the service, contact your Lexus dealer.
●Lexus Enform functions are not subject to
section 255 of the Telecommunications
Act and the system is not TTY compatible.
328
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. LEXUS ENFORM-OVERVIEW
4. TYPE C: FUNCTION ACHIEVED BY USING DCM
The functionality of Lexus Enform Safety Connect is made possible by the use of a
DCM.
For details, refer to “Owner’s Manual”.
8
LEXUS ENFORM
329
LX_Navi_OM60N29U_(U)
15.07.30 20:43
2. LEXUS ENFORM OPERATION
1. LEXUS Enform Remote
For details about the functions and services provided by this app, refer to
http://www.lexus.com/enform/.
SUBSCRIPTION
 After you sign the Telematics Subscription Service Agreement (see the LEXUS Enform
Safety Connect section in “Owner’s Manual”), download the LEXUS Enform Remote
app from your cellular phone’s app store, and register within the app (or enroll and complete registration at the dealer), you can begin using these services.
 A variety of subscription terms are available. Contact your Lexus dealer, or call 1-80025-LEXUS (1-800-255-3987) for further subscription details.
AVAILABILITY OF FUNCTION
 Lexus Enform Remote is available in the contiguous United States, Washington D.C.,
and Alaska.
INFORMATION
●Lexus Enform Remote should only be used by authorized users.
●Laws in some communities may require that the vehicle be within view of the user when
operating Lexus Enform Remote.
In some states, use of Lexus Enform Remote may violate state or local laws. Before using
Lexus Enform Remote, check your state and local laws.
●Any malfunction of the Lexus should be repaired by your Lexus dealer.
●Lexus Enform Remote is designed to work at temperatures above -22 F (-30 C). This
specification is related to the Lexus Enform Remote operation, but is dependent on the
vehicle’s operating temperature range which may be different.
●Content is subject to change without notice.
●Some features of the Lexus Enform Remote may not be available on some models.
●Additional information can be found at www.lexus.com/enform/.
330
LX_Navi_OM60N29U_(U)
15.07.31 14:53
2. LEXUS ENFORM OPERATION
2. LEXUS Enform Service Connect
For details about this service and how to register, refer to
http://www.lexus.com/enform/.
AVAILABILITY OF FUNCTION
 Lexus Enform Service Connect is available in the contiguous United States,
Washington D.C., Hawaii, Alaska, and Canada.
INFORMATION
●Availability of functions of the Lexus Enform Service Connect is dependent on network
reception level.
8
LEXUS ENFORM
331
LX_Navi_OM60N29U_(U)
15.07.31 14:53
2. LEXUS ENFORM OPERATION
3. LEXUS App Suite
USING LEXUS App Suite
App Suite is a function that enables applicable apps installed on a cellular
phone to be displayed on and operated
from the navigation screen. Before App
Suite can be used, a few settings need to
be performed. (P.325)
For details about the functions and services provided by each application, refer to http://www.lexus.com/enform/.
3 Select the desired application screen
button.
: Select to activate an application.
“Update”: Select to update the applications. (P.333)
“Reorder”: Select to change the order of
the applications. (P.334)
: Displays the number of new notifications for the application
1 Press the “MENU” button on the
Remote Touch.
2 Select “LEXUS App Suite”.
332
LX_Navi_OM60N29U_(U)
15.07.31 14:53
2. LEXUS ENFORM OPERATION
UPDATING AN APPLICATION
When App Suite is activated, an application may need to be updated. By updating the application, it can be kept to the
latest version. To update an application,
it is necessary to download update data
and install it.
■ DOWNLOADING UPDATE
3 Check that downloading is complete.
“Later”: Select to install later. When this
screen button is selected, the screen will return to the last displayed screen. To install
the update data: P.334)
“See Detail”: Select to display detailed information on the update data.
“Install”: Select to install the update data.
Follow the steps “INSTALLING THE UPDATE DATA” from “STEP 2”. (P.334)
If an update is available, “Update” can
be selected.
1 Select “Update” on the “LEXUS App
Suite” screen. (P.332)
2 Check that downloading starts.
“Download in Background”: Select to operate other functions while downloading.
“Cancel”: Select to cancel updating.
8
LEXUS ENFORM
333
LX_Navi_OM60N29U_(U)
15.07.31 14:53
2. LEXUS ENFORM OPERATION
■ INSTALLING THE UPDATE DATA
After the downloading is complete,
“Update” will be changed to “Install”.
1 Select “Install” on the “LEXUS App
Suite” screen. (P.332)
2 Select “Continue”.
“Later”: Select to postpone the installation
of the update data and go back to the previous screen.
3 Check that installing is started.
“Install in Background”: Select to operate
other function while installing.
REORDERING THE
APPLICATIONS
Order of the applications can be
changed.
1 Display the “LEXUS App Suite” screen.
(P.332)
2 Select “Reorder”.
3 Select the desired application to be
moved.
4 Select “<<” or “>>” to move the application, and select “OK”.
4 Select “OK” after the installing is complete.
INFORMATION
●The App Suite function cannot be operated while installing.
334
LX_Navi_OM60N29U_(U)
15.07.31 14:53
2. LEXUS ENFORM OPERATION
IF A MESSAGE APPEARS ON THE SCREEN
When problems occur with starting the application player, a message will appear on
the screen. Referring to the table below, identify the problem and take the suggested
corrective action.
Display conditions
Corrective action
“This feature is unavailable
during an emergency call.”
Safety Connect is being implemented.
After the Safety Connect call
is finished, perform the operation again.
“This feature is unavailable
while transferring contacts.”
Contacts are being transferred manually from the
phonebook.
When the transfer of contacts
is complete, perform the operation again.
“Unable to connect to a
Bluetooth* phone. For troubleshooting
assistance,
please visit the Lexus website
or contact your dealer.”
The cellular phone cannot be
connected.
Refer
to
http://
www.lexus.com/enform/ to
confirm if the phone is compatible or not.
“This feature is unavailable
during a handsfree call.”
A hands-free call is in
progress.
After the hands-free call is finished, perform the operation.
“To use the services, an active
application needs to be running on your phone. For more
information, please visit
lexus.com.”
The LEXUS App Suite application cannot be connected
to Bluetooth® SPP.
Refer
to
http://
www.lexus.com/enform/ to
confirm if the phone is
Bluetooth® SPP compatible
or not, and then activate the
App Suite application.
“Communication error.
Please try again.”
Communication was disconnected.
After a few moments, retry the
operation.
*: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc.
335
LX_Navi_OM60N29U_(U)
15.07.31 14:53
8
LEXUS ENFORM
Message
2. LEXUS ENFORM OPERATION
LINKING LEXUS App Suite
AND NAVIGATION SYSTEM
LOCAL FUNCTION
The setting a destination and making a
hands-free call functions of the navigation system can be performed via App
Suite. For details about the functions and
services provided by each application,
refer to http://www.lexus.com/enform/.
1 Press the “MAP” button on the Remote
Touch.
SETTING A DESTINATION
USING LEXUS App Suite
Locations that were searched for using
the App Suite can be set as a destination.
1 Display the “Web Search” screen.
(P.336)
2 Select the desired application screen
button to perform search.
3
4
5
6
Enter a search term, and select “Go”.
Select “Map”.
Select “Go to
”.
Select “OK” to start guidance.
 For the operation of the route guidance
screen and the function of each screen
button: P.102
2 Select “Dest.”.
3 Select “Web Search”.
4 Check that the “Web Search” screen is
displayed.
336
LX_Navi_OM60N29U_(U)
15.07.31 14:53
2. LEXUS ENFORM OPERATION
MAKING A PHONE CALL
USING LEXUS App Suite
ENTERING A KEYWORD
USING THE SOFTWARE
KEYBOARD
Phone calls can be made to locations
which were searched for using App
Suite.
1 Display the “LEXUS App Suite” screen.
1 Display the “Web Search” screen.
2 Select the desired application screen
2 Select the desired application screen
3 Select the character entering space.
4 Enter a search term, and then select
(P.336)
button to perform search.
3 Enter a search term, and select “Go”.
4 Select “Call”.
5 Select “Yes”.
“Cancel”: Select to cancel making a phone
call.
6 Check that the “Call” screen is displayed.
 For phone operation and the function of
each screen button: P.292
A keyword can be entered to an application by the software keyboard or
voice recognition function. For details
about the functions and services provided by each application, refer to
http://www.lexus.com/enform/.
button.
“OK”.
5 Entering characters will be reflected on
the character entering space.
 For details on operating the keyboard:
P.34
ENTERING A KEYWORD
USING THE VOICE
RECOGNITION FUNCTION
8
1 Display the “LEXUS App Suite” screen.
(P.332)
2 Select the desired application screen
button.
3 Press the talk switch. (P.258)
4 Say the desired keyword.
 Completion of the keyword will be
detected automatically.
5 Search results will be displayed on the
screen.
 The keyboard layout can be changed.
(P.57)
337
LX_Navi_OM60N29U_(U)
15.07.31 14:53
LEXUS ENFORM
ENTERING KEYWORD
OPERATION
(P.332)
2. LEXUS ENFORM OPERATION
4. LEXUS Enform Destinations
Destination Assist
Destinations provide you with live assistance for finding destinations via the
Lexus response center. You can request
either a specific business, address, or
ask for help locating your desired destination by category, such as restaurants,
gas stations, shopping centers or other
Points of Interest (POI).
After you tell the agent your choice of
destination, its coordinates are sent
wirelessly to your vehicle’s navigation
system.
2 Select “Dest.”.
3 Select “Destination Assist”.
4 When an agent comes on the line, tell
the agent the address, business name,
or the type of POI or service.
 To adjust the call volume, select “-” or “+”,
or use the volume switch on the steering
wheel during the call.
 To hang up the phone, select “Disconnect”
or press the
wheel.
switch on the steering
MAKE A CALL WITH
Destination Assist
1 Press the “MAP” button on the Remote
Touch.
338
LX_Navi_OM60N29U_(U)
15.07.31 14:53
2. LEXUS ENFORM OPERATION
5 After the agent helps you determine
your location of choice, this screen is
displayed. Select the screen button of
the desired action.
No.
Function
Select to register as a memory point.
Select to set as a destination.
Select to display detailed information.
Select to call the registered number.
eDestination
With the eDestination feature, you can
go online, and via the Lexus.com owner’s Web site, select and organize destinations of your choice and then
wirelessly send them to your vehicle’s
navigation system. Up to 200 locations
can be stored online and accessed or
updated at any time.
 Locations can be organized into up to 20
personalized folders.
INFORMATION
●You must first go online at
www.lexus.com/drivers/ to view the
Owners site where you will need to register and log in. After this, personalized
folders that contain the locations to be
sent to your vehicle can be created. (See
Lexus Enform Guide for more information.)
8
LEXUS ENFORM
339
LX_Navi_OM60N29U_(U)
15.07.31 14:53
2. LEXUS ENFORM OPERATION
DOWNLOADING
eDestinations
After updating eDestination folders online, it is necessary to download the updated data to the vehicle.
1 Press the “MAP” button on the Remote
Touch.
3
4
5
6
Select “Point of Interest”.
Select “eDestination”.
Select “Download”.
Select “Yes” when the confirmation
screen appears.
7 Check that downloading starts.
 The most recent Destinations data will be
loaded to the navigation system.
2 Select “Dest.”.
340
LX_Navi_OM60N29U_(U)
15.07.31 14:53
2. LEXUS ENFORM OPERATION
SEARCHING eDestinations
5 Select the desired eDestination catego-
1 Press the “MAP” button on the Remote
6 Select the desired location.
7 Select the screen button of the desired
Touch.
ry.
action.
2 Select “Dest.”.
3 Select “Point of Interest”.
4 Select “eDestination”.
No.
Function
Select to register as a memory point.
Select to set as a destination.
Select to call the registered number.
8
1 Select
LEXUS ENFORM
DISPLAYING eDestination
ICONS
on the map screen.
(P.72)
2 Select “Map Information”.
3 Select “eDestination”.
341
LX_Navi_OM60N29U_(U)
15.07.31 14:53
2. LEXUS ENFORM OPERATION
5. Lexus Insider
Lexus Insider is an optional function that
can send audio messages, or articles, to
participating owners’ vehicles via the
navigation system. Potential Lexus
Insider subjects might include, for example, Lexus vehicle technology tips, updates on regional Lexus events, or audio
excerpts from Lexus Magazine articles.
“Listen Now”: Select to play newly received
Lexus Insider article(s).
“Listen Later”: Select to close the
notification screen without playing articles.
The notification screen will be displayed
again when the engine switch is turned to
ACCESSORY or IGNITION ON mode.
NEW MESSAGE
NOTIFICATION
When the vehicle is first powered on and
a new Lexus Insider article is available, a
notification will appear on the navigation
screen.The notice will appear for only
approximately 6 seconds unless one of
the options listed is selected.
1 When the new message notification ap-
pears, any of the following options can
be selected.
342
LX_Navi_OM60N29U_(U)
15.07.31 14:53
2. LEXUS ENFORM OPERATION
VIEWING AND PLAYING
RECEIVED Lexus Insider
MESSAGES
1 Press the “MENU” button on the
Remote Touch.
MESSAGE ICONS
Icons appear at the left of the Lexus
Insider story titles and indicate the following.
Icon
Article
Unread article
Previously read article
Unread article with
downloadable Point of
Interest (POI)
2 Select “Info”.
3 Select “Lexus Insider”.
4 Select the desired article title.
Previously read article
with downloadable Point
of Interest (POI)
“Read All”: Select to listen to all stored
Lexus Insider broadcasts.
8
LEXUS ENFORM
 To disrupt the audio read of Lexus Insider,
press the “MODE” switch on the steering
wheel, or press the “RADIO” or “MEDIA”
button on the audio system.
343
LX_Navi_OM60N29U_(U)
15.07.31 14:53
2. LEXUS ENFORM OPERATION
LISTENING TO ANOTHER
ARTICLE
DOWNLOADING A POI
1 Display the “LEXUS Insider” screen.
Some Lexus Insider articles will contain
a downloadable POI relevant to the
content.
2 Select the desired article.
3 Select “Next” or “Previous” to listen to
1 Display the “LEXUS Insider” screen.
(P.343)
another article.
 The “ ” or “ ” switch on the steering wheel
can be used to move to the previous or next
article.
 To stop listening to the broadcast, select
“Stop” or press the “PWR·VOL” knob of
the audio system.
(P.343)
2 Select the desired article.
3 Select “Enter ”.
 If a POI is contained, “Enter ” can be
selected to download a POI to the navigation system.
4 Select “Go” to set the POI as a destination with route directions.
DELETING Lexus Insider
ARTICLE
1 Display the “LEXUS Insider” screen.
(P.343)
2 Select “Delete”.
3 Select the item to be deleted and select
“Delete”.
4 Select “Yes” when the confirmation
screen appears.
344
LX_Navi_OM60N29U_(U)
15.07.31 14:53
3. SETUP
1. LEXUS App Suite SETTINGS
The settings of App Suite can be
changed.
SCREEN FOR LEXUS App Suite
SETTINGS
1 Press the “MENU” button on the
Remote Touch.
No.
2 Select “Setup”.
3 Select “LEXUS App Suite”.
4 Select the items to be set.
Information
Page
Select to set the voice guidance volume.

Select to set the pop up reminder for cellular phone
data usage.
346
Select to set Lexus Insider
settings.
346
Select to reset all setup
items.

8
LEXUS ENFORM
345
LX_Navi_OM60N29U_(U)
15.07.30 20:43
3. SETUP
PHONE DATA PLAN POP-UP
SETTINGS
Lexus Insider SETTINGS
The phone data plan pop-up can be set
when a paid application is downloaded.
Lexus Insider settings, notification, and
opt in or out of article receipt can be
changed.
1 Display the “LEXUS App Suite Set-
1 Display the “LEXUS App Suite Set-
2 Select “Mobile Data Usage Notifica-
2 Select “LEXUS Insider”.
3 Select the items to be set.
tings” screen. (P.345)
tion”.
3 Check the desired function to be oper-
tings” screen. (P.345)
ated.
No.
Function
Select to set the receiving of Lexus Insider articles yes/no.
Select to set the new message notification on/off.
Select to reset all setup items.
346
LX_Navi_OM60N29U_(U)
15.07.30 20:43
9
1
12.3-INCH DISPLAY
2
1
12.3-INCH DISPLAY
OPERATION
3
1. 12.3-INCH
4
DISPLAY-OVERVIEW ...................... 348
FULL SCREEN DISPLAY .................................. 348
SPLIT-SCREEN DISPLAY................................. 348
5
2. USING SIDE DISPLAY ......................... 350
BASIC SCREENS .................................................. 350
6
INTERRUPTION SCREENS ............................ 352
7
8
9
347
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. 12.3-INCH DISPLAY OPERATION
1. 12.3-INCH DISPLAY-OVERVIEW
FULL SCREEN DISPLAY
The following functions can be displayed full screen:
Function
Page
Initial screen
30
“Menu” screen
14
Map screen
72
SPLIT-SCREEN DISPLAY
Different information can be displayed on the left and right of the screen. For example,
audio screen can be displayed and operated while the map screen is being displayed.
The large screen on the left of the display is called the main display, and the small
screen to the right is called the side display.
Main display
Side display
348
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. 12.3-INCH DISPLAY OPERATION
MAIN DISPLAY
For details about the functions and operation of the main display, refer to the respective section.
SIDE DISPLAY
The following functions can be displayed
and operated on the side display.
Basic screens
Function
Page
Navigation system
350
Audio
351
Phone
352
Vehicle information
“Owner’s
Manual”
Air conditioning
“Owner’s
Manual”
OPERATING
CHARACTERISTICS OF THE
SPLIT-SCREEN DISPLAY
When the split-screen is displayed, it is
necessary to select the screen you wish
to operate (main display or side display).
When selecting the main display
1 Move the Remote Touch knob to the
left.
When selecting the side display
1 Move the Remote Touch knob to the
right.
9
Interrupt screens
Intuitive parking assist
Page
“Owner’s
Manual”
Phone
353
Destination Assist
338
Driving mode
12.3-INCH DISPLAY
Function
“Owner’s
Manual”
349
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. 12.3-INCH DISPLAY OPERATION
2. USING SIDE DISPLAY
BASIC SCREENS
To change the screen displayed on the
side display, use the screen buttons on
the right side of the display.
SWITCHING THE BASIC
SCREEN
1 Select the desired button.
No.
NAVIGATION SYSTEM
A map or a compass with information
about the current position can be displayed.
The orientation can be changed between 2D north-up, 2D heading-up and
3D heading-up by selecting the orientation symbol.(P.77)
Function
Select to display the navigation
screen.
Select to display the audio control
screen.
Select to display the phone screen.
Select to display the vehicle information screen.
Select to display the air conditioning
control screen.
350
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. 12.3-INCH DISPLAY OPERATION
AUDIO/VIDEO SYSTEM
■ SELECTING AN AUDIO SOURCE
1 Select “”.
2 Select the desired source.
■ RADIO OPERATION
On the side display, preset stations can
be selected.
■ MEDIA OPERATION
Operations such as selecting a chapter,
file or track are carried out on the
screen.
No.
Function
 Select to select a chapter/track/
file.
 Select and hold to rewind.
Select to stop the video screen.
Select to play/pause.
INFORMATION
●Depending on the audio source, some
functions may not be available.
351
LX_Navi_OM60N29U_(U)
15.07.30 20:43
9
12.3-INCH DISPLAY
“ ”, “ ”: Select to tune in to the desired
preset station/channel.
 Select to select a chapter/track/
file.
 During playback: Select and hold
to fast forward.
 During a pause: Select and hold to
slow forward.
1. 12.3-INCH DISPLAY OPERATION
HANDS-FREE SYSTEM (FOR
CELLULAR PHONE)
When hands-free mode is selected, it is
possible to make call on the side display
if the desired contact is registered on the
5 displayed buttons.
1 Select the desired contact.
INTERRUPTION SCREENS
Intuitive parking assist screen, phone
screen, etc. are displayed automatically
in accordance with conditions.
SWITCHING THE
INTERRUPTION SCREEN
When multiple interruption screens
have been opened, the hidden screens
can be brought forward and displayed
once again. (The driving mode screen
cannot be displayed again.)
1 Select “ ” or “ ” to select the desired
2 Check that the “Call” screen is dis-
display.
played.
■ REGISTERING A NEW CONTACT
A contact can be selected from the favorites list. (P.307)
1 Select “Add from Favorites”.
2 Select the desired contact.
3 Select the desired number.
■ DELETING THE CONTACT
1 Select and hold the screen button to
change the contact.
2 Select “Yes” when the confirmation
screen appears.
352
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1. 12.3-INCH DISPLAY OPERATION
HANDS-FREE SYSTEM
(FOR CELLULAR PHONE)
The following functions can also be displayed and operated on the side display.
For details about these functions, refer
to the respective section.
■ DISPLAYING ON THE MAIN DISPLAY
The screen can be displayed on the main
display when carrying out an operation
that cannot be conducted on the side
display.
1 Select
Calling on the Bluetooth® phone
P.285
Incoming calls
P.291
Incoming call waiting
P.294
Talking on the Bluetooth® phone
P.292
.
INFORMATION
INFORMATION
●If side display is selected for any of the
functions above and the function is activated, the status bar will be displayed on
the side display. For details about the status bar: P.16
353
LX_Navi_OM60N29U_(U)
15.07.30 20:43
9
12.3-INCH DISPLAY
●Operation is still possible using the steering phone switch even if the phone
screen is hidden behind another interruption screen. If the operation is conducted
using a steering switch, the phone screen
will automatically be brought to the front.
For details on operating the steering
phone switch and the main display:
P.280
1. 12.3-INCH DISPLAY OPERATION
354
LX_Navi_OM60N29U_(U)
15.07.30 20:43
1
INDEX
2
3
4
5
6
7
8
9
355
LX_Navi_OM60N29U_(U)
15.07.30 20:43
ALPHABETICAL INDEX
ALPHABETICAL INDEX
Numerics
B
12.3-inch display ......................................................347
12.3-inch display operation................................ 348
12.3-inch display-overview ................................ 348
Full screen display............................................. 348
Split-screen display........................................... 348
Basic function........................................................ 12, 29
Basic information before operation ...................30
Basic operation ................................................. 72, 142
Bluetooth® audio..........................................188, 247
Bluetooth® audio...............................................249
Connecting a Bluetooth® device................ 193
Listening to Bluetooth® audio....................... 193
Overview.....................................................188, 247
Bluetooth® phone message function.............295
Calling the message sender..........................299
Checking messages.......................................... 297
Receiving a message........................................296
Replying to a message (Quick Reply).......298
Bluetooth® settings ..................................................40
A
AM/FM radio ............................................................153
Available HD Radio™ Technology .............160
Caching a radio program ................................ 157
Overview ................................................................153
Preset button screen..........................................156
Radio broadcast data system .........................159
Selecting a station from the list ...................... 157
Troubleshooting guide......................................162
Using HD Radio™ Technology.....................160
AM/FM/SAT radio ................................................229
Overview ...............................................................229
Audio settings ............................................................201
Audio settings screen........................................201
Audio/visual Remote Controls ..........................198
Audio/visual system ................................................139
AUX...............................................................................194
External options ................................................... 197
Overview ................................................................194
C
Calling on the Bluetooth® phone....................285
By call history.......................................................286
By contacts list.....................................................287
By dial Pad ............................................................289
By favorites list.....................................................286
By off hook switch..............................................290
Casual speech recognization............................266
CD.......................................................................... 171, 231
Overview........................................................ 171, 231
Command list ........................................................... 267
D
Data services settings............................................278
Setting download methods ............................278
Destination search.....................................................89
Destination search operation ...............................89
Destination search by
Destination Assist ............................................ 97
Searching by address.......................................... 92
Searching by address book .............................. 97
Searching by coordinates................................100
Searching by emergency...................................98
356
LX_Navi_OM60N29U_(U)
15.07.30 20:43
Searching by intersection and freeway .......98
Searching by map............................................... 100
Searching by point of interest.......................... 93
Searching from previous destinations ..........97
Selecting search area ...........................................91
Setting home as destination ...............................91
Setting preset destinations as
destination ............................................................91
Detailed navigation settings ................................ 128
Screens for navigation settings..................... 128
DVD ....................................................................174, 234
DVD options.......................................................... 177
DVD video options ........................................... 236
Overview .....................................................174, 234
E
Editing route ................................................................ 114
Adding destinations............................................. 114
Deleting destinations........................................... 115
Detour setting ........................................................ 116
Reordering destinations .................................... 114
Selecting route type............................................. 115
Setting route preferences .................................115
Starting from adjacent road ............................. 117
Entering letters and numbers/list screen
operation .................................................................. 34
Entering letters and numbers .......................... 34
List screen................................................................ 35
External devices ......................................................250
Overview ..............................................................250
G
General settings .........................................................57
General settings screen .....................................57
GPS (Global Positioning System) ....................135
Limitations of the navigation system............135
H
How to use the Remote Touch.............................32
I
Information.................................................................275
Information display .................................................276
“Information” screen .................................................20
Initial screen................................................................. 30
Internet radio.............................................................. 170
Listening to internet radio................................170
iPod .................................................................... 183, 244
iPod audio....................................................187, 246
iPod video...............................................................187
Overview .................................................... 183, 244
F
Function index............................................................. 26
Functional overview...............................................320
LEXUS Enform Remote...................................321
LEXUS Enform Service Connect ................321
357
LX_Navi_OM60N29U_(U)
15.07.30 20:43
ALPHABETICAL INDEX
L
M
LEXUS App Suite .................................................. 332
Entering keyword operation..........................337
Linking LEXUS App Suite and
navigation system local function ............ 336
Using LEXUS App Suite................................ 332
LEXUS App Suite settings ................................. 345
Screen for LEXUS App Suite
settings .............................................................. 345
LEXUS enform..........................................................319
LEXUS Enform Destinations ............................ 338
Destination Assist.............................................. 338
eDestination......................................................... 339
LEXUS enform operation .................................. 330
LEXUS Enform Remote...................................... 330
LEXUS Enform Service Connect .....................331
LEXUS Enform-Overview................................. 320
Lexus Insider..............................................................342
New message notification ..............................342
Viewing and playing received
Lexus Insider messages............................. 343
Linking multi-information display and
navigation system ..................................................39
Map database version and covered area......138
About the map data ...........................................138
Map information..................................................138
Map screen information......................................... 80
Displaying information about the icon
where the cursor is set ...................................84
Displaying map information............................. 80
Standard map icons .............................................85
Map screen operation ............................................. 75
Adjusting location in small increments ........ 79
Current position display..................................... 75
Map scale ................................................................. 76
Orientation of the map ........................................77
Screen scroll operation ......................................78
Switching the map mode ...................................78
Media operation......................................................... 171
Memory points............................................................118
Memory points settings...........................................118
Deleting previous destinations.......................127
Setting up address book ...................................122
Setting up areas to avoid.................................. 125
Setting up home.....................................................119
Setting up preset destinations ....................... 120
“Menu” screen...............................................................14
Status display ............................................................16
Mobile assistant ....................................................... 272
Mobile assistant operation.................................. 272
N
Navigation operation ............................................... 22
Navigation system .......................................................71
358
LX_Navi_OM60N29U_(U)
15.07.30 20:43
O
R
Operating information ..............................207, 254
A/V input port..................................................... 256
Caution screen ................................................... 254
Copyrights and trademarks .......................... 256
DVD player and disc........................................208
Error messages.....................................................219
File information .....................................................215
Headphones ........................................................255
iPod............................................................................213
Radio ....................................................................... 207
Terms ........................................................................217
The remote controller...................................... 254
Volume...................................................................255
When
appears on the screen................ 254
Operation flow: Guiding the route .................... 24
Other settings ............................................................. 57
Radio operation ........................................................153
Rear seat entertainment system features....... 221
Display ....................................................................223
Quick reference .................................................. 221
Rear seat entertainment system
operation................................................................229
Rear seat entertainment system settings........251
Displaying the setting screen .........................251
Receiving doppler weather information........276
Displaying doppler weather
information.......................................................276
Receiving on the Bluetooth® phone................ 291
Incoming calls ....................................................... 291
Registering home .......................................................22
Registering preset destinations............................23
Registering/connecting Bluetooth®
device ........................................................................ 40
Profiles .......................................................................44
Registering a Bluetooth®
audio player for the first time.......................42
Registering a Bluetooth® phone
for the first time................................................. 40
Remote Touch .............................................................. 12
Route guidance.........................................................106
Route guidance screen..........................................106
During freeway driving .....................................109
Route overview ....................................................108
Screen for route guidance...............................106
Turn list screen .......................................................112
Turn-by-Turn Arrow screen .............................112
When approaching intersection......................111
P
Phone........................................................................... 279
Phone operation (Hands-free system for
cellular phones) ..................................................280
Phone settings..........................................................300
“Contacts/Call History” screen ..................302
“Messaging” screen..........................................309
“Notifications” screen ....................................... 310
“Sounds” screen .................................................. 301
Q
Quick guide .................................................................... 11
Quick reference.............................18, 72, 142, 280
Map screen ..............................................................72
Navigation options screen.................................74
359
LX_Navi_OM60N29U_(U)
15.07.30 20:43
ALPHABETICAL INDEX
S
Screen adjustment .....................................................37
Setting Bluetooth® details......................................46
“Bluetooth* Setup” screen.................................46
Connecting a Bluetooth® device ..................49
Deleting a Bluetooth® device .........................49
Editing the Bluetooth® device
information ...........................................................51
Registering a Bluetooth® device ...................47
“System Settings” screen................................... 53
Setting home as the destination ...........................25
Setup............................................128, 201, 300, 345
Setup for rear seat entertainment system......251
“Setup” screen ..............................................................18
Some basics ...........................................144, 224, 281
About the contacts in the contact list........ 284
Audio screen adjustment.................................. 151
Connecting a device to rear
A/V input port ................................................226
Disc slot ...................................................................146
Operating rear seat entertainment
system from the front seats....................... 228
Registering/connecting a
Bluetooth® phone ....................................... 282
Selecting an audio source................................145
Selecting the sound mode ..............................226
Selecting the source..........................................227
“Sound Settings” screen ...................................149
Turning on/off the rear entertainment
system.................................................................225
Turning the system on and off ........................144
USB/AUX port.................................................... 147
Using the phone switch/microphone....... 282
Using the remote controller ..........................224
Voice command system....................... 152, 283
When selling or disposing of the
vehicle ............................................................... 284
Starting route guidance...........................................101
Confirm destination screen............................ 102
Entire route map screen .................................. 102
Steering switches .....................................................198
T
Talking on the Bluetooth® phone....................292
Incoming call waiting........................................294
Tips for operating rear seat
entertainment system.......................................254
Tips for operating the audio/visual
system .....................................................................207
Tips for the navigation system............................. 135
Traffic information......................................................86
Displaying traffic information
on the map ......................................................... 88
Traffic settings............................................................ 133
Screen for traffic settings................................. 133
Troubleshooting ....................................................... 312
Type A: Function achieved by using a
cellular phone ......................................................322
Before using the function................................324
Preparation before using
LEXUS App Suite.........................................325
Type B: Function achieved by using
DCM and the navigation system.................326
Before using the function................................ 327
Type C: Function achieved by using
DCM .......................................................................329
Typical voice guidance prompts..........................113
U
USB memory ....................................................179, 241
Overview.......................................................179, 241
Using side display .................................................. 350
Basic screens ...................................................... 350
Interruption screens..........................................352
*: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
360
LX_Navi_OM60N29U_(U)
15.07.30 20:43
V
Vehicle settings .......................................................... 65
Maintenance........................................................... 66
Voice command system ...........................257, 258
Using the voice command system..............258
Voice command system operation ............ 259
Voice command system operation .................258
Voice settings.............................................................. 63
Voice settings screen.......................................... 63
W
What to do if................................................................312
X
XM Satellite Radio ...................................................163
Displaying the radio ID......................................167
How to subscribe to an XM Satellite
Radio....................................................................165
If the satellite radio tuner malfunctions...... 168
Overview ................................................................163
Selecting a channel from the list....................167
361
LX_Navi_OM60N29U_(U)
15.07.30 20:43
Map database information and updates
This system uses the maps of DENSO.
362
LX_Navi_OM60N29U_(U)
15.07.30 20:43
363
LX_Navi_OM60N29U_(U)
15.07.30 20:43
364
LX_Navi_OM60N29U_(U)
15.07.30 20:43
365
LX_Navi_OM60N29U_(U)
15.07.30 20:43
366
LX_Navi_OM60N29U_(U)
15.07.30 20:43
367
LX_Navi_OM60N29U_(U)
15.07.30 20:43
368
LX_Navi_OM60N29U_(U)
15.07.30 20:43
369
LX_Navi_OM60N29U_(U)
15.07.30 20:43
370
LX_Navi_OM60N29U_(U)
15.07.30 20:43
Certification
U.S.A.
371
LX_Navi_OM60N29U_(U)
15.07.30 20:43
Canada
372
LX_Navi_OM60N29U_(U)
15.07.30 20:43
 Gracenote, the Gracenote logo and logotype, “Powered by Gracenote”, MusicID, Playlist
Plus and MediaVOCS are either registered trademarks or trademarks of Gracenote, Inc.
in the United States and/or other countries
373
LX_Navi_OM60N29U_(U)
15.07.30 20:43
374
LX_Navi_OM60N29U_(U)
15.07.30 20:43
For U.S. owners
375
LX_Navi_OM60N29U_(U)
15.07.30 20:43
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising