QuickSpecs

QuickSpecs
QuickSpecs
HPE Synergy 12000 Frame
Overview
HPE Synergy 12000 Frame
•
HPE Synergy 12000 Frame - Front View
6 Zones for Compute and Storage
•
6 Interconnect Module Bays(3+3 Redundancy)
•
2 Appliance Bays for Management
•
10 Fan Bays(Fans included with all models)
•
Front Panel, for Synergy Console connections
•
6 Power Supplies (N+N, N+1 Redundancy)
•
2 Frame Link Module Slots
NOTE: See Device Bay Population Guidelines in section below
HPE Synergy 12000 Frame - Rear View
What's New
The HPE Synergy 12000 Frame is a key element of HPE Synergy providing the base for an intelligent infrastructure with embedded
management and scalable links for expansion as business demand requires. The Frame is the base infrastructure that pools
resources of compute, storage, fabric, cooling, power and scalability. With an embedded management solution combining the
Synergy Composer and Frame Link Modules, IT can manage, assemble and scale resources on demand. The Synergy Frame is
designed for the needs now and in the future with expanded compute and fabric bandwidths and photonics ready.
HPE Synergy is a single infrastructure of physical and virtual pools of compute, storage, and fabric resources, and a single
management interface that allows IT to instantly assemble and re-assemble resources in any configuration. As the foundation for
the New Style of Business infrastructure, the HPE Synergy eliminates hardware and operational complexity so IT can deliver
infrastructure to applications faster and with greater precision and flexibility.
NOTE: HPE Synergy 12000 Frame are compatible with existing applications and workloads running on c-Class infrastructures
today. Subject to availability of options required for specific applications.
Page 1
QuickSpecs
HPE Synergy 12000 Frame
Standard Features
HPE Synergy
12000
Frame
HPE Synergy solutions start with a Synergy 12000 Frame which includes 10 Fans and a single Frame Link
Module. Once the Frame has been selected, the following options may be added for a complete solution:
Synergy Compute Modules, networks and storage options, networking interconnect modules/switches, single
or redundant Synergy Composer(s) with embedded OneView, additional power supplies and an additional
redundant Frame Link Module for easy solutions scalability.
HPE Synergy 12000 Frame, is the base for all Synergy products and supports.
• Up to 12 half-height or 6 full-height Compute Modules, Zone designs allow space for double wide
half height and full height Compute and/or Storage devices, mixing allowed in designated areas.
• Ten fans and single Frame Link Module included with every system
• Two appliance bays for redundant management appliances, embedded OneView (additional solution
options in future)
• Up to six 2650 Watt Power Supplies of Titanium class efficiency providing 7950 Watts of redundant
power line support
• Up to 6 Interconnect bays for full redundancy of 3 fabrics.
• 2 slots for Frame Link Modules, offers links to multiple frames through a private air-gapped
management network
• HPE Synergy management that maximizes power and cooling efficiency
• HPE Intelligent Resources technology built-in to every frame and option for Auto-Discovery of
resources
HPE Synergy
Appliances
HPE Synergy Composer, is a management appliance with OneView embedded. The
appliance plugs directly into the Frame to manage all Synergy resources intelligently and
seamlessly. The Synergy Composer appliance integrated to the system provides:
• A single point of management for single or scaled frames. Ideal for on demand
composability.
• Manages all frame resources through OneView profiles and templates.
• Auto-Discovery of Compute, Memory, Storage and Fabrics within a Frame or
multiple connected frames.
• Activity, Health and Power LEDs for immediate status.
NOTE: The USB port is for Hewlett Packard Enterprise Certified Service Parties Only.
HPE Synergy Image Streamer is a management appliance that provides fast
image/application changes to compute resources to meet your composable infrastructure
needs. It integrates software-defined intelligence from embedded HPE Synergy Composer
to deploy and update physical compute nodes with operating environments at extreme
speed for fast virtualized image changeovers, secure boot, and image compliance. A single
point of management for single or scaled frames. Ideal for on demand composability.
• Provisions boot/run storage volumes and deploys OS.
• Personalizes OS per deployment plan.
• Generates iSCSI target for the boot/run volume.
Page 2
QuickSpecs
HPE Synergy 12000 Frame
Service and Support
HPE Synergy Frame Link Module (FLM), is the frame resource information control point
and link to multiple frames.
• Integrated direct access to a single or multiple Frames through a HPE Synergy
Composer – OneView
• A dedicated 10GbE air-gapped management network for multi-frame
communications
• Immediate status and health details through OneView
• Reports asset and inventory information for the devices in the frame
• Robust, multi-Frame setup and control via HPE Synergy Composer(OneView)
• Reports thermal and power information, including real-time actual power usage
per server and per frame.
• First FLM included in every Synergy Frame. Add a second option for redundancy
and links to multi-Frame connectivity.
• Provides HPE Synergy Console interface on Front Panel and each Frame Link
Module
NOTE: See Step 3 for details on the Frame Link Module and cable options.
HPE Synergy Console, is the frame resource information control point. Connect here for Technician setup
and installation and to login to OneView and/or manage one or more frames.
• Front access to Synergy Console is provided by the Front Panel Monitor Port and USB 2.0
connectors
• Rear access to Synergy Console is provided on each Frame Link Module
• Laptop connect to Synergy Console from Front Panel (RJ45 port) via simplet VNC services (free
VNC software may be downloaded from the internet)
NOTES: Hewlett Packard Enterprise offers and recommends the HPE LCD8500 1U Rackmount Console as
the Synergy recommended Display Solution. See the Rackmount Solutions section below. The Monitor Port
supports any monitor that has DisplayPort™ or an active DisplayPort adaptor for interfacing to VGA, HDMI
or DVI monitors. External USB hub required for keyboard and mouse if monitor does not include a hub.
Console Connect to the Front Panel
Console Connect to a Frame Link Module - Rear
Page 3
QuickSpecs
HPE Synergy 12000 Frame
Service and Support
Warranty
The HPE Synergy is covered by a global limited warranty and supported by Hewlett Packard Enterprise
Services and a worldwide network of Hewlett Packard Enterprise Authorized Channel Partners. Hardware
diagnostic support and repair is available for three years from date of purchase. Support for software and
initial setup is available for 90 days from date of purchase. Additional support may be covered under the
warranty or available for an additional fee. Enhancements to warranty services are available through HPE
Care Pack services or customized service agreements.
• HPE Synergy 12000 Frame: 3-3-3; Three-year parts and labor, on-site limited global
warranty. Certain restrictions and exclusions apply
• Frame options: Fans, Power Supplies, Frame Link Modules, 1 Year parts only or Frame
warranty
• HPE Synergy Composer: 3-3-3; Three-year parts and labor, on-site limited global warranty.
• HPE Synergy Interconnect Modules/Switches: 1 Year parts and labor, on-site regardless of
the warranty period for the system in which they are installed
• HPE Storage Fibre Channel switches have a maximum warranty period of one (1) year
regardless of the warranty period for the system in which they are installed
• Hard drives have either a one year or three year warranty; refer to specific hard drive Tech
Specs for details.
For additional information please visit: www. hpe.com/info/synergy
Rack Airflow
Requirements
HPE Advanced and Enterprise Series Racks
The increasing power of new high-performance processor technology requires increased cooling efficiency for
rack-mounted servers. The HPE Series Racks provide enhanced airflow for maximum cooling, allowing these
racks to be fully loaded with servers using the latest processors.
NOTE: For the complete list of installation requirements, please see the “HPE Synergy Site Planning Guide”
at http://www.hpe.com/support.
Third-party racks
NOTE: If a third-party rack is used, observe the following additional requirements to ensure adequate
airflow and to prevent damage to the equipment:
• Front and rear doors: If your server rack includes closing front and rear doors, you must have a
minimum of 65% free area compared to the total area of the door evenly distributed from top to
bottom to permit adequate airflow.
Page 4
QuickSpecs
HPE Synergy 12000 Frame
Service and Support
•
•
•
•
•
•
Front door: The clearance from face of rack to inside of the front door must be a minimum of 77
mm (3 in).
Rear door: The clearance between the rear of the Frame and the rear rack door must be a
minimum of 175 mm (6.9 in) to accommodate system cabling.
Side: The clearance between the installed rack component and the side panels of the rack must be
a minimum of 70 mm (2.75 in).
Width: 483 mm (19 in)
Depth: Maximum clearance between front and rear RETMA rails is 864 mm (34 in). Minimum
clearance for round-hole racks is 627 mm (24.7 in). Minimum clearance for square-hole racks is
635 mm (25 in).
The rack must be able to accept the adjustable rack rails that are shipped with each Frame :
− Minimum rail length: 698.5 mm (27.5 in)
− Maximum rail length: 749.3 mm (29.5 in)
NOTE: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
arrangement ensures proper airflow. Using a rack without blanking panel’s results in improper cooling that
can lead to thermal damage.
NOTE: For the complete list of installation requirements, please see the “HPE Synergy Frame Site Planning
Guide” at http://www.hpe.com/support.
Factory Express
Portfolio for
Servers and
Storage
HPE Factory Express offers configuration, customization, integration and deployment services for HPE
Synergy solutions. Customers can choose how their factory solutions are built, tested, integrated, shipped and
deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex configuration
and design services as well as individual factory services, such as image loading, asset tagging and custom
packaging. Hewlett Packard Enterprise products supported through Factory Express include: a wide array of
servers and storage, rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server model please contact your sales
representative or go to: https://www.hpe.com/us/en/services/factory-express.html.
Software Release
Sets (with Synergy
custom SPP
bundles)
HPE Synergy Software Release Sets allow users to perform firmware, driver, and related software updates.
Software Release Sets include download files to allow component updates for the Synergy subset of the SPP
(delivered as a custom download), HPE Synergy Composer, HPE Synergy Image Streamer, and other switches
that are not managed by Composer. Combinations within a specific release set are developed and released
together.
• http://www.hpe.com/downloads/synergy
HPE Power Advisor The HPE Power Advisor is a tool provided by Hewlett Packard Enterprise to assist in the estimation of power
consumption and proper selection of components including power supplies at a system, rack, and multi-rack
level. A variety of additional features are also provided including a condensed bill of materials, a cost of owner
ship calculator, and a power report. The HPE Power Advisor tool allows you to configure multiple Hewlett
Packard Enterprise compute, storage, fabric and power infrastructure solutions into a single rack or multi-rack
configuration.
Hewlett Packard Enterprise highly recommends using the HPE Power Advisor tool to ensure the number of
power supply options you have selected can fully support your Synergy 12000 Frame configuration and to
review maximum system power ratings for facilities planning purposes.
HPE Power Advisor is available at: http://www.hpe.com/info/hpepoweradvisor.
Page 5
QuickSpecs
HPE Synergy 12000 Frame
Service and Support
HPE Synergy
Planning Tool
The Synergy Planning Tool is a new simple and intuitive resource, giving you the ability to plan a Synergy
systems following the standard build rules we have in ordering systems today. The tool provides multiple preconfigured starting points with the ability to customize. The tool provides a Bill of Materials to facilitate
customer quotes and orders. The current version is intended for internal HPE and partner use.
Click here to download the HPE Synergy Planning Tool.
https://sizersllb.itcs.hpe.com/sb/installs/HPESynergyPlanningTool.zip
Page 6
QuickSpecs
HPE Synergy 12000 Frame
Service and Support
Service and Support HPE Technology Services offers you a rich portfolio of consulting and support services designed to add value
to our core products and solutions. We have the know-how and experience to put technology to work for you.
We work closely with you, as your strategic partner, leveraging our full services portfolio to make sure that
everything works to help optimize your enterprise.
Choose from services aligned to our product offerings and lifecycle. From proactive onsite services to
innovative support when your products are connected to Hewlett Packard Enterprise, you choose the precise
level of attention and support your business demands.
HPE Technology Services for HPE Synergy
HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and stability.
Connect to Hewlett Packard Enterprise to help prevent problems and solve issues faster. Our support
technology lets you to tap into the knowledge of millions of devices and thousands of experts to stay
informed and in control, anywhere, any time.
Protect your business beyond warranty with HPE Support Services
Hewlett Packard Enterprise support services offer complete care and support expertise with committed
response choices that are designed to meet your IT and business needs.
HPE Foundation Care services offer scalable reactive support-packages for HPE Synergy and software. You
choose the type and level of service that is most suitable for your IT and business needs.
HPE Proactive Care keeps your system stable and reliable helping to prevent problems and reduce outages
through proactive service management and enhanced technical response.
Advise, transform, HPE Technology Services helps you get the most out of what you have today and transition to HPE Synergy,
integrate, support, a composable infrastructure, at your pace and from wherever you are on the journey.
automate, and flex
Start with the HPE Transformation Workshop to ensure that your business and IT organizations
collaborate, define the topline strategy for composable, software-defined, cloud-ready infrastructure and kickstart your projects confidently. This workshop clarifies your business requirements and the issues that IT and
operations teams must resolve in order to meet these requirements. A detailed executive briefing or high-level
report summarizes the strategies, high-level plan and functional requirements.
HPE Modernization and Migration Services helps you choose the right platform for the right workload at
the right cost and evolve your IT infrastructure, processes and organization taking advantage of “on-hybrid
infrastructure” innovations such as composable, converged, software-defined, technologies. Hewlett Packard
Enterprise experts advise, transform, integrate and implement for platform refresh, datacenter consolidation
virtualization, migration and automation projects.
HPE Flexible Capacity is a pay per use model for on premise infrastructure. This offers needed HPE Synergy
capacity in the datacenter, plus a buffer of additional capacity. As HPE Synergy will be a dynamic environment,
this provides enough room to grow your environment, but only pay for actual metered use. Technology
transitions and refresh can be built in, infrastructure and services are billed monthly, enabling you to align
costs to business use.
HPE Datacenter Care-Infrastructure Automation (DC-IA) is an extension to HPE Datacenter Care and
delivers enterprise-grade support, advice, guidance and best practices for infrastructure automation. The DCIA Center of Excellence (CoE) is staffed with highly trained experts who have specific expertise on integrating
Chef with HPE OneView.
Choose the right support to maximize uptime, free up your resources, and achieve improved value—as you
get the most out of the existing IT assets while accelerating time-to-revenue.
Page 7
QuickSpecs
HPE Synergy 12000 Frame
Service and Support
Optimized Support HPE Proactive Care Advanced - 24x7 coverage, three year Support Service
Builds and incorporates on Proactive Care and also gives customers personalized technical and operational
advice from an assigned, local Account Support Manager for personalized technical collaboration, flexible
access to specialist skills to help optimize business critical IT, and Critical Incident Management to help so the
business is not affected if there is a system or device outage. This recommendation provides 24x7 coverage
with four-hour response for hardware and Basic Software Support and Collaborative Call Management for
selected non-HPE software that offers two-hour callback for supported software issues.
https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA5-3259ENW.pdf
Standard Support
HPE Proactive Care with 24x7 coverage, three year Support Service
Hardware and software support services designed specifically for your technology with rapid access to
Advanced Solution Center specialists for start to finish case management plus proactive reports and
recommendations for firmware and software management and best practice advice. This recommendation
provides 24x7 coverage with four-hour response for hardware and Basic Software Support and Collaborative
Call Management for selected non-HPE software that offers two-hour callback for supported software issues.
https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf
Deploy and
integrate
HPE Factory Express Initial Frame Service for Synergy
Factory Express allows a customers’ configurations to be pre-configured in the HPE Integration center with an
implementation project manager to manage the deployment end to end. The project manager will act as a
single point of contact to coordinate the build, delivery and onsite installation and commissioning of the
solution. In addition to the configuration and deployment activities, your HPE Synergy configuration goes
through comprehensive testing and a detailed documentation package on the configuration and settings of
the delivered solution will be provided.
HPE Factory Express Synergy Additional Frame Service for Synergy
Add additional frames to your HPE Synergy Factory Express service or expand your existing HPE Synergy
Infrastructure.
HPE Synergy First Frame Installation and Startup - Provides for hardware installation (HPE Synergy
compute modules, Storage Modules, Virtual Connect modules, Interconnect Link Modules, Frame Link
Modules, and HPE Synergy D3940 Storage Modules) and software startup for the first frame of your HPE
Synergy deployment. Additional frames can be added using the HPE Synergy Additional Frame Installation
and Startup Service.
HPE Synergy Additional Frame Installation and Startup Service - Add additional frames to your HPE
Synergy First Frame Startup service or expand your existing HPE Synergy Infrastructure.
HPE Education
Training your IT staff is critical to help drive the value of HPE Synergy with increased efficiencies and better
business outcomes. Training is key to the transformation and management of HPE Synergy.
Parts and Materials Hewlett Packard Enterprise will provide Hewlett Packard Enterprise-supported replacement parts and
materials necessary to maintain the covered hardware product in operating condition, including parts and
materials for available and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage
limitations as set forth in the manufacturer's operating manual, product QuickSpecs, or the technical product
data sheet will not be provided, repaired, or replaced as part of these services.
Page 8
QuickSpecs
HPE Synergy 12000 Frame
Service and Support
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced
by Hewlett Packard Enterprise due to malfunction.
For more
information
Additional Support Services can be found at HPE Support Center
http://www.hpe.com/support/hpesc.
Page 9
QuickSpecs
HPE Synergy 12000 Frame
All Synergy Frame Models
HPE Synergy
12000 Frame
Options
NOTE: Hewlett Packard Enterprise does not allow factory integration of options into pre-configured
models. Any additional options purchased will be shipped separately.
NOTE: If you desire a custom configuration, please see the "Configuration Information - Factory Integrated
Models" section of this QuickSpecs.
NOTE: Each Synergy 12000 Frame holds up to 12 half-height compute module, 6 full-height compute
modules, and/or 6 double wide half-height compute/storage modules or 3 double wide full-height compute
modules.
Configure To Order
HPE Synergy 12000 Configure-to-order Frame with 1x Frame Link Module 10x Fans
NOTE: This Synergy 12000 CTO Frame 797740-B21 includes 1 Frame Link Module, 10
hot-plug Fans, with KVM ports built-in, and the following blanking based on the
configuration of the Frame.
Pre-Configured Models
HPE Synergy 12000 Frame with 1x Frame Link Module 2x Power Supplies 10x Fans
This Frame is configured to operate as an entry model for the customer that needs only a
single Frame and does not intend to scale and link multiple Frames.
NOTE: This Synergy 12000 Frame 797738-B21 includes 1 Frame Link Module, 2
2650W Hot Plug Titanium Power Supplies each with a worldwide 250W C19 - C20 2.0m
jumper cord, 10 hot-plug Fans, with KVM ports built-in, and the blanks based on this
configuration of the Frame.
NOTE: Additional Power Supplies must be added depending on the configuration.
Please see Power Advisor or the Synergy Planning Tool for properly aligning
configuratons.
NOTE: An HPE Synergy Composer (see Appliance Section below) is REQUIRED to
manage this single Frame. A second Synergy Composer would offer redundancy for your
management system.
NOTE: A optional second Frame Link Module should be added to this solution for
redundancy and scaling to multiple frames.
NOTE: See Step 3 for Frame Link Topology
HPE Synergy 12000 Frame with 2x Frame Link Modules 6x Power Supplies 10x Fans
This Frame is configured to operate as a scalable model for the customer that is looking to
purchase multiple Frames that will be linked together in a single management domain.
Cables for linking Frames are provided in this spec.
NOTE: This Synergy 12000 Frame 797738-B21 includes 2 Frame Link Modules, 6
2650W Hot Plug Titanium Power Supplies each with a worldwide 250W C19 - C20 2.0m
jumper cord, 10 hot-plug Fans, with KVM ports built-in, and the blanks based on this
configuration of the Frame.
NOTE: A pair HPE Synergy Composers (see Appliance Section below) is REQUIRED to
manage any domain of multiple Frames to sustain management redundancy. The two
Synergy Composers may be placed in any Appliance bay within the linked Frames
domain and will manage the Domain.
NOTE: See Step 3 for Frame Link Topology
797740-B21
797738-B21
797739-B21
Page 10
QuickSpecs
HPE Synergy 12000 Frame
Related Options
NOTE: This section lists some of the required and optional steps to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, Hewlett Packard Enterprise recommends contacting your local sales representative for information
on Factory Integrated Model product offerings and requirements.
For a complete configuration of the HPE Synergy Frame System, please do the following:
Step 1: Select desired model, configuration, and quantity of HPE Synergy Frames and options per
Frame (required)
NOTE: HPE Synergy 12000 Frame will support all new components as part of the new Synergy Solutions program. Please
review the links below to specific for Frame, Compute, Storage and Interconnects for details.
NOTE: Each HPE Synergy Frame holds up to 12 half height or 6 full height compute modules. Compute blanks will be shipped in
all empty bays.
NOTE: For Synergy Compute Module information, please visit: http://www.hpe.com/info/synergy
Select the base Frame configuration (required)
HPE Synergy
NOTE: The Frame listed below includes a single Frame Link Module and 10 Fans. KVM connect for
Synergy Console and Synergy Composer/OneView access is on the Front Panel of the Frame. Additional
Frame
management appliances and frame linking modules, power supply kits, power cables, interconnects,
additional fans, etc. are added per the steps below.
NOTE: The Frame listed below include the required blanking panels (device bay, interconnect module,
power, redundant Appliance bays and Frame Link Modules as required per the ordered configuration. If
the configuration is modified at a later date, additional blanking panels (ordered separately) may be
required.
HPE Synergy 12000 Configure-to-order Frame with 1x Frame Link Module 10x Fans
797740-B21
Select the Frame power options (required)
HPE Synergy
Power Supplies
Synergy Power Supply (Up to 6)
NOTE: Hewlett Packard Enterprise highly recommends using the HPE Power Advisor or
the HPE Synergy Planning Tool to ensure the number of power supply options you have
selected can fully support your Synergy System configuration and to review maximum
system power ratings for facilities planning purposes. HPE Power Advisor is simply a
power start up advisor and does not reflect the actual power usage on each Frame or
the values that may appear in OneView. HPE Power Advisor is available
at: http://www.hpe.com/info/hpepoweradvisor.
HPE Synergy Planning Tool is available at:
Click here to download the HPE Synergy Planning Tool.
https://sizersllb.itcs.hpe.com/sb/installs/HPESynergyPlanningTool.zip
NOTE: Each Frame must include only one type of power supply. Mixing of power
supplies is not supported, except during hot swaps to different level or higher efficient
power supplies. OneView will exhibit a mismatch or not available error due to mixed
power supplies until all power supplies are matched.
NOTE: HPE Synergy 12000 Frame AC power supplies meet 80 PLUS Titanium power
efficiency requirements: Titanium (96%). The 80 PLUS program is a unique forum that
unites electric utilities, the computer industry, and consumers in an effort to bring
energy efficient technology solutions to the marketplace. 80 PLUS independently tests
power supply efficiency and publically posts the results
Page 11
QuickSpecs
HPE Synergy 12000 Frame
Related Options
on https://plugloadsolutions.com/80PlusPowerSupplies.aspx. DC power supplies are
not eligible for 80 PLUS testing; efficiency is per Hewlett Packard Enterprise internal
testing.
HPE 6x 2650W Performance Hot Plug Titanium Plus FIO Power Supply Kit
NOTE: This option is for factory install only.
NOTE: This option contains Intelligent Auto-Discovery features for HPE OneView.
NOTE: The bundle includes a quantity of 6 HPE 2650W Titanium 96% PSU so a full
Frame can be configured with a single part number.
NOTE: HPE Synergy Power supplies meet multiple Energy Efficiency Initiatives: 2650W,
96%: Climate Savers Computing Initiative TITANIUM and ECOS Consulting 80 Plus
Titanium.
HPE 2650W Performance Hot Plug Titanium Plus Power Supply Kit
NOTE: This option contains Intelligent Auto-Discovery features for HPE OneView.
NOTE: HPE Synergy Power supplies meet multiple Energy Efficiency Initiatives: 2650W,
96%: Climate Savers Computing Initiative Titanium and ECOS Consulting 80 Plus
Titanium.
NOTE: Mixing of Power Supplies Is Not Supported on Synergy 12000 Frames, except
during hot swaps to different level power supplies. HPE OneView will exhibit a mismatch
error due to mixed power supplies until all power supplies are matched and performance
issues may arise.
HPE 6x 2650W HVDC Hot Plug Factory Integrated Power Supply Kit
NOTE: This option is for factory install only.
NOTE: This option contains Intelligent Auto-Discovery features for HPE OneView.
NOTE: The bundle includes a quantity of 6 HPE 2650W 94% PSU so a full Frame can be
configured with a single part number.
NOTE: HPE Synergy 2650W HVDC Power Supplies provide 94% energy efficiency.
HPE 2650W HVDC Hot Plug Power Supply Kit
NOTE: This option contains Intelligent Auto-Discovery features for HPE OneView.
NOTE: HPE Synergy 2650W HVDC Power Supplies provide 94% energy efficiency.
NOTE: Mixing of Power Supplies Is Not Supported on Synergy 12000 Frames, except
during hot swaps to different level power supplies. HPE OneView will exhibit a mismatch
error due to mixed power supplies until all power supplies are matched and performance
issues may arise.
798096-B21
798095-B21
798349-B21
798342-B21
Step 2: Select Management Appliance Options
HPE Synergy Frame HPE Synergy Composer
Management
Appliance Options HPE Synergy Composer provides enterprise-level management to deploy the exact
resources to your application needs. Its software-defined intelligence uses embedded HPE
OneView to aggregate Compute, Storage, Fabric resources in a manner that scales linearly
to your application needs, instead of being restricted to the fixed ratios of traditional
resource offerings.
804353-B21
HPE Synergy Composer is a management appliance that directly integrates into the
Frame of the system and communicates directly with the Frame Link Module. A single
Synergy Composer manages one or more Frames linked through the Frame Link Modules.
The Synergy Composer option selected determines the number of Frames linked and
managed. Use of two HPE Synergy Composer modules is recommended for redundancy
and high availability.
Page 12
QuickSpecs
HPE Synergy 12000 Frame
Related Options
NOTE: Required for the first HPE Synergy Frame system.
NOTE: HIGHLY RECOMMENDED that a second HPE Synergy Composer appliance
module be added for high availability or redundancy.
NOTE: No direct license is required. Supports any HPE Synergy Compute module and
other installed module options.
HPE Synergy Image Streamer
804937-B21
HPE Synergy Image Streamer is a management appliance that provides fast
image/workload changes to compute resources to meet your Composable Infrastructure
needs. It integrates software-defined intelligence from embedded HPE Synergy Composer
to deploy and update physical compute nodes with operating environments at extreme
speed for fast virtualized image changeovers, secure boot, and image compliance.
NOTE: For more details on the HPE Synergy Image Streamer configuration and setup
please refer to the Image Streamer Quick Specs for more details.
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04815217
Step 3: Select optional Redundant Synergy Frame Link Modules
HPE Synergy Frame Link Module
804942-B21
The Frame Link Module is the control and information link for a highly intelligent self-aware system of hardware
options. It provides a direct link for resource information to the Synergy Composer (OneView). The link module
provides an option for an air-gapped 10Gbe management network ring that allows for multi-frame connectivity.
Single or multiple Frames directly linked through this management network can be automatically discovered by
OneView along with their resources (compute, storage, networking, and other options) the instant they are
plugged in and/or powered on.
NOTE: Every Synergy 12000 Frame comes with a single Frame Link Module. For redundancy and linking
multiple frames it is REQUIRED that a second Frame Link Module be purchased for each additional Frame
connected/linked.
NOTE: The Frame Link Module comes with 10 Gb/s private Ethernet networking solution included and
requires a CAT6A or CAT7 cabling between Frames for connection to multiple Frames or forming a
Management ring between multiple Frames. Multiple CAT6A cables are offered through Hewlett Packard
Enterprise below Use 1 meter cables within a frame or between frames and a 3 meter cable to go from a
bottom frame in a rack to the top frame or frame in another rack or from the management connector to the
management network.
Page 13
QuickSpecs
HPE Synergy 12000 Frame
Related Options
See Frame Link Topology below.
Management Network
Single Frame MGMT Port and LINK Port Topology
Multiple Frame MGMT Port and LINK Port Topology
HPE Frame Link
Topology Cables
HPE Synergy Frame Link Module CAT6A 1.2m Cable
NOTE: For linking consecutive Frames
861412-B21
HPE Synergy Frame Link Module CAT6A 3m Cable
NOTE: For linking bottom Frames to top Frames in a rack.
861413-B21
HPE Synergy Frame Link Module CAT6A 6.4m Cable
NOTE: For linking Management links requiring long runs to Top of Rack or between Racks.
861414-B21
Step 4: Select 1 or more interconnect switches/link modules for each Frame (as required)
For more information related to Frame interconnect modules and
switches and cables required please consult the specific
Interconnect Switches/Module QuickSpecs.
NOTE: The HPE Synergy 12000 Frame provides Slots for 3
redundant Fabrics as shown here. Redundancy is 1 & 4, 2 & 5 and
3 & 6.
Page 14
QuickSpecs
HPE Synergy 12000 Frame
Related Options
The following is a list of various HPE Synergy 12000 Frame Interconnect switches and link modules (Virtual Connect, Ethernet,
Fibre Channel, SAS and Satellite Interconnect Modules). A pair of interconnects must be ordered if redundancy is required. For
detailed interconnect options, consult the specific Synergy Interconnect Switches/Modules QuickSpecs.
NOTE: Interconnect bays provide direct connect to Mezzanines within the Compute Modules in the front bays of the Frame. All
Compute Mezzanine 1’s connect to ICM slots 1 with redundancy in slot 4. All Compute Mezzanine 2’s connect to ICM slots 2 with
redundancy in slot 5. All Compute Mezzanine 3’s connect to ICM slots 3 with redundancy in slot 6.
NOTE: For HPE Best Practices placement see notes with each ICM and place the associated mezzanines in the Compute slots
associated with the ICM slots.
NOTE: The HPE Synergy interconnects ship as single units unless otherwise noted. Interconnects must be ordered in quantities
of two for redundancy support.
NOTE: Options to specific Synergy interconnects are not included in the list below. Consult the individual interconnect
QuickSpecs to obtain part numbers for interconnect options such as cables, SFPs, etc.
HPE Synergy
Network
Interconnects
HPE Synergy 10Gb Interconnect Link Module
HPE Synergy 20Gb Interconnect Link Module
HPE Synergy 10/40Gb Pass Thru Module
HPE Storage and NOTE: The HPE Synergy Storage Module and 12Gb SAS connection modules are
supported on all Synergy 12000 Frame(s).
SAS Switch
HPE Synergy D3940 12Gb SAS CTO Drive Enclosure with 40 SFF (2.5in) Drive Bays
NOTE: The HPE Synergy Storage Module requires at least one and a maximum of two
12Gb SAS Connection Modules per frame.
HPE Synergy D3940 12Gb SAS Drive Enclosure with 40 SFF (2.5in) Drive Bays
779215-B21
779218-B21
799330-B21
835386-B21
755984-B21
NOTE: The HPE Synergy Storage Module requires at least one and a maximum of two
12Gb SAS Connection Modules per frame.
12Gb SAS Connection Modules per frame.
HPE Synergy D3940 Redundant I/O Adapter
757323-B21
NOTE: One I/O Adapter is configured automatically in each Synergy D3940 Storage
Module. A second I/O Adapter can be selected for redundancy.
HPE Synergy 12Gb SAS Connection Module with 12 Internal Ports
755985-B21
NOTE: A SAS Connection Module must be placed in ICM bay 1 and ICM bay 4. If only
configuring a single module in the frame, a connection module in ICM bay 1 will support
storage modules in bays 1 – 6. A connection module in ICM bay 4 will support storage
modules in bays 7-12. A second connection module can be configured in the frame for
failover.
HPE Smart Array P542D/2GB FBWC 12Gb Mezzanine SAS Controller
759557-B21
NOTE: Each compute module connecting to a Synergy D3940 storage module must be
configured with a Smart Array P542D controller in mezzanine slot 1.
HPE Synergy SAN NOTE: HPE Fibre Channel interconnect switches and modules supporting up to a 16Gbps
internal port downlink speed (connection speed from the compute modules to the
Interconnects
interconnect) (P/N: 779227-B21, K2Q83A, K2Q84A, K2Q86A) are supported on all HPE
Synergy 12000 Frames.
NOTE: For a list of complete 16Gb FC SAN Switch Module SAN management software,
hardware, cables and transceiver options for HPE Synergy, please refer to the Brocade
16Gb FC Switch Module QuickSpecs for HPE Synergy at:
Page 15
QuickSpecs
HPE Synergy 12000 Frame
Related Options
NOTE: Brocade 16Gb FC Switch Module 12-port Upgrade can be used on any FC switch
module option, scalable up to 36 FC ports.
Brocade 16Gb/12 Fibre Channel SAN Switch Module for HPE Synergy
Brocade 16Gb/24 Fibre Channel SAN Switch Module for HPE Synergy
Brocade 16Gb/24 PowerPack+ Fibre Channel SAN Switch Module for HPE Synergy
Brocade 16Gb Fibre Channel SAN Switch Module 12-port Upgrade LTU for HPE Synergy
Brocade 16Gb Fibre Channel SAN Switch Module 12-port Upgrade E-LTU for HPE Synergy
HPE Virtual Connect SE 16Gb Fibre Channel Module for Synergy
HPE Synergy 3820C 10/20Gb Converged Network Adapter
HPE Synergy
Converged
HPE Synergy 3830C 16Gb Fibre Channel Host Bus Adapter
Network Adaptors HPE Synergy 3530C 16Gb Fibre Channel Host Bus Adapter
777430-B21
777452-B21
777454-B21
794538-B21
HPE Synergy 2820C 10Gb Converged Network Adapter
HPE Synergy 40GbE/4x10GbE/4x8Gb FC QSFP+ Transceiver
HPE Synergy
Transceivers and HPE Synergy Dual 10GBASE-T QSFP+ 30m RJ45 Transceiver
Cable options
HPE B-series 4x16 Short Wave QSFP Transceiver
HPE Synergy Interconnect Link 1.1m Direct Attach Copper Cable
HPE Synergy Interconnect Link 1.6m Direct Attach Copper Cable
HPE Synergy Interconnect Link 2.1m Direct Attach Copper Cable
HPE Synergy Interconnect Link 3m Active Optical Cable
HPE Synergy Interconnect Link 5m Active Optical Cable
HPE Synergy Interconnect Link 10m Active Optical Cable
HPE Synergy Interconnect Link 15m Active Optical Cable
HPE Best
Practices ICM Slot
Priority
Placement
Part#
779224B21
794502B21
799330B21
K2Q83A
K2Q84A
K2Q86A
D4U69A
D4U69AAE
779227-B21
817040-B21
838327-B21
K2Q87A
804095-B21
804098-B21
804155-B21
804101-B21
804104-B21
804107-B21
804110-B21
• Best practice is to have main Ethernet/Converged fabric in Fabric 3 (ICM bays 3 and 6)
• Best practice is to have storage fabric in Fabric 1 (ICM bays 1 and 4)
• Best practice is to have Fabric 2 (ICM bays 2 and 5) used for 2nd Ethernet fabric or
2nd storage fabric if there are two of either of those
• SAS storage ICM takes precedence over FC ICMs for Fabric 1
• Best practice is to populate both respective ICM bays for each fabric in support of
module redundancy
• Both ICM bays within a fabric must contain the same ICM module unless the fabric is a
Synergy Composable Fabric
• For Synergy Composable Fabrics the frame can be populated with combinations of
Master or Satellite modules depending on the intended multi-frame configuration.
Option
HPE Synergy 40Gb F8 Switch Module
HPE Virtual Connect SE 40Gb F8 Module for
HPE Synergy
HPE Synergy 10/40Gb Pass Thru Module
ICM Slot Numbers(top to bottom of Frame)
1
2
3
4
5
6
Slot Priorities for each Options
3
5
1
4
6
2
Fabric Type
Ethernet
3
5
1
4
6
2
Ethernet
3
5
1
4
6
2
Ethernet
Page 16
QuickSpecs
HPE Synergy 12000 Frame
Related Options
755985B21
779218B21
779215B21
K2Q83A
K2Q84A
779227B21
HPE Synergy 12Gb SAS Connection Module
with 12 Internal Ports
HPE Synergy 20Gb Interconnect Link
Module
HPE Synergy 10Gb Interconnect Link
Module
Brocade 16Gb/12 Fibre Channel SAN Switch
Module for HPE Synergy
Brocade 16Gb/24 Fibre Channel SAN Switch
Module for HPE Synergy
HPE Virtual Connect SE 16Gb FC Module for
HPE Synergy
1
2
Note
1
Note
1
1
Note
1
Note
1
3
Note
1
Note
1
5
Note
1
Note
1
2
1
3
5
2
1
3
5
2
SAS
Note
1
Note
1
4
Note
1
Note
1
6
Ethernet
Fibre Channel
4
6
Fibre Channel
4
6
Fibre Channel
Ethernet
Synergy 12000 Frame - Best Practices Options Slotting
Corresponding Compute Mezzanine Slots(Sy480
Compute)
Mezz Slots
ICM
Compute Mezzanine Description
Bays
HPE Synergy 2820C 10/20Gb
M1
Bay1
Converged Network Adapter
(794538-B21)
HPE Synergy 3820C 10/20Gb
Converged Network Adapter
(777430-B21)
Interconnect Links/Modules
Mezz Slots
HPE VC SE 40Gb F8 Module
(794502-B23)
HPE Synergy 40Gb F8 Switch
Module (779224-B23)
HPE Synergy 20Gb Interconnect
Link Module (779218-B21)
HPE Synergy 3830C 16G Fibre
Channel HBA
HPE Smart Array P542D Controller
(759557-B21)
M2
HPE Synergy 2820C 10/20Gb
Converged Network Adapter
(794538-B21)
HPE Recommended Slotting
Order
Compute Mezzanine
Description
Brocade 16Gb/24 Fibre Channel
SAN Switch Module for HPE Synergy
(K2Q84A)
Brocade 16Gb/24 PowerPack+ Fibre
Channel SAN Switch Module for HPE
Synergy (K2Q86A)
HPE Virtual Connect SE 16Gb Fibre
Channel Module for Synergy
(779227-B21)
Brocade 16Gb/12 Fibre Channel
SAN Switch Module for HPE Synergy
(K2Q83A)
HPE Synergy 12Gb SAS Connection
Module with 12 Internal Ports
(755985-B21)
Bay 2 HPE VC SE 40Gb F8 Module
(794502-B23)
This is the Primary Fabric/ICM
Slot for a Synergy D3940
Storage module in Front Frame
device bays 1-6, this fabric slot
must be used for SAS ICM Bay#1
with SAS Mezzanine Controller
(Mezz #1) of the Compute
module. If the storage module is
in device bays 7-12, a SAS ICM
must be in ICM Bay #4.
Regardless of storage module
placement ICM Bays #1 and #4
are redundant slots. If there is no
storage being used in the frame
this ICM bay and Mezzanine slot
are open for Ethernet or Fibre
Channel networking slotting.
This ICM Bay/Mezzanine slot is
usually the primary fibre channel
fabric, when storage modules are
Page 17
QuickSpecs
HPE Synergy 12000 Frame
Related Options
HPE Synergy 3820C 10/20Gb
Converged Network Adapter
(777430-B21)
HPE Synergy 3830C 16G Fibre
Channel HPA
M3
HPE Synergy 2820C 10/20Gb
Converged Network Adapter
(794538-B21)
HPE Synergy 3820C 10/20Gb
Converged Network Adapter
(777430-B21)
HPE Synergy 40Gb F8 Switch
Module (779224-B23)
HPE Synergy 20Gb Interconnect
Link Module (779218-B21)
included in the Frame. It can also
be used as a secondary ethernet
fabric. When using single
processor Synergy Compute
Modules these Bays will be
unavailable.
Brocade 16Gb/24 Fibre Channel
SAN Switch Module for HPE Synergy
(K2Q84A)
Brocade 16Gb/24 PowerPack+ Fibre
Channel SAN Switch Module for HPE
Synergy (K2Q86A)
HPE Virtual Connect SE 16Gb Fibre
Channel Module for Synergy
(779227-B21)
Brocade 16Gb/12 Fibre Channel
SAN Switch Module for HPE Synergy
(K2Q83A)
Bay 3 HPE VC SE 40Gb F8 Module
(794502-B23)
HPE Synergy 40Gb F8 Switch
Module (779224-B23)
HPE Synergy 20Gb Interconnect
Link Module (779218-B21)
Mezzanine #3 in the Compute
Brocade 16Gb/24 Fibre Channel
module along with Frame ICM
SAN Switch Module for HPE Synergy Bays #3/#6 are the Primary
(K2Q84A)
Ethernet Fabric.
Brocade 16Gb/24 PowerPack+ Fibre
Channel SAN Switch Module for HPE
Synergy (K2Q86A)
HPE Virtual Connect SE 16Gb Fibre
Channel Module for Synergy
(779227-B21)
Brocade 16Gb/12 Fibre Channel
SAN Switch Module for HPE Synergy
(K2Q83A)
ICM Bays 1 and 4, 2 and 5 and 3 and 6 are Redundant. Primary bays are 1, 2 and 3.
NOTES:
You cannot mix different types of Ethernet, Fibre or SAS ICMs in any redundant Interconnect Bay Set.
The two interconnect slots of an interconnect Bay set cannot support different types of fabrics (ethernet, fibre,
and SAS).
Best Practices: ICM Slots 1 & 4 for SAS, 2 & 5 Fibre Channel or secondary Ethernet, 3 & 6 primarily Ethernet fabrics. Do not place
an ethernet interconnect in slots 1, 2, 4, or 5 unless interconnect slots 3 and/or 6 are filled.
Do not place a fibre channel interconnects in ICM slots 1 or 4 if slots 2 and 5 are free, unless you have compute
modules with unpopulated CPU2 sockets.
HPE Synergy 3830C 16G Fibre
Channel HPA
Page 18
QuickSpecs
HPE Synergy 12000 Frame
Related Options
Step 5: HPE Synergy Storage Module(Optional)
HPE Synergy
NOTE: The HPE Synergy Storage Module and 12Gb SAS connection modules are
Storage Modules supported on all Synergy 12000 Frame(s).
HPE Synergy D3940 12Gb SAS CTO Drive Enclosure with 40 SFF (2.5in) Drive Bays
835386-B21
NOTE: The HPE Synergy Storage Module requires at least one and a maximum of two
12Gb SAS Connection Modules per frame.
HPE Synergy D3940 12Gb SAS Drive Enclosure with 40 SFF (2.5in) Drive Bays
755984-B21
NOTE: The HPE Synergy Storage Module requires at least one and a maximum of two
12Gb SAS Connection Modules per frame.
HPE Synergy D3940 Redundant I/O Adapter
757323-B21
NOTE: One I/O Adapter is configured automatically in each Synergy D3940 Storage
Module. A second I/O Adapter can be selected for redundancy.
HPE Synergy 12Gb SAS Connection Module with 12 Internal Ports
755985-B21
NOTE: A SAS Connection Module must be placed in ICM bay 1 and ICM bay 4. If only
configuring a single module in the frame, a connection module in ICM bay 1 will support
storage modules in bays 1 – 6. A connection module in ICM bay 4 will support storage
modules in bays 7-12. A second connection module can be configured in the frame for
failover.
HPE Smart Array P542D/2GB FBWC 12Gb Mezzanine SAS Controller
759557-B21
NOTE: Each compute module connecting to a Synergy D3940 storage module must be
configured with a Smart Array P542D controller in mezzanine slot 1.
Step 6: Select your Rack (optional)
HPE Data Center NOTE: Hewlett Packard Enterprise highly recommends the use of racks with a depth of
1200mm (47.2 in) or deeper to ensure adequate space in the back of the rack for cable and
Racks
power management. Additional Hewlett Packard Enterprise Data Center racks are available
other than those listed below. For more information on the full line of Hewlett Packard
Enterprise Data Center Racks and rack accessories, please
see https://www.hpe.com/us/en/integrated-systems/rack-power-cooling.html.
HPE Advanced Series Racks
HPE 42U 600mm x 1200mm Advanced Pallet Rack
HPE 42U 600mm x 1200mm Advanced Shock Rack
HPE 42U 800mm x 1200mm Advanced Pallet Rack
HPE 42U 800mm x 1200mm Advanced Shock Rack
H6J67A
H6J68A
H6J69A
H6J70A
HPE Enterprise Series Racks
HP 36U 600mm x 1200mm Enterprise Pallet Rack
HP 36U 600mm x 1200mm Enterprise Shock Rack
HP 42U 600mm x 1200mm Enterprise Pallet Rack
HP 42U 600mm x 1200mm Enterprise Shock Rack
HP 42U 600mm x 1200mm Enterprise Air Duct Rack
HPE 42U 600mm x 1200mm Enterprise Shock Network Rack
HP 42U 800mm x 1200mm Enterprise Pallet Rack
BW899A
BW900A
BW907A
BW908A
BW910A
BW966A
BW919A
Page 19
QuickSpecs
HPE Synergy 12000 Frame
Related Options
HP 42U 800mm x 1200mm Enterprise Shock Rack
HPE 42U 800mm x 1200mm Enterprise Shock Network Rack
HP 42U 600mm x 1200mm Grey Enterprise Shock Rack
HP 42U 600mm x 1200mm Grey Enterprise Air Duct Rack
HP 42U 800mm x 1200mm Grey Enterprise Shock Rack
HP 42U 800mm x 1200mm Grey Enterprise Shock Network Rack
HP 47U 600mm x 1200mm Enterprise Pallet Rack
HP 47U 600mm x 1200mm Enterprise Shock Rack
HPE 47U 600mm x 1200mm Enterprise Air Duct Rack
BW920A
BW968A
TK756A
TK766A
TK760A
TK772A
BW913A
BW914A
BW936A
NOTE: Hewlett Packard Enterprise provides both standard pallet and shock pallet shipping
options for most racks. If there is a requirement to transport the rack with any IT
equipment installed, Hewlett Packard Enterprise highly recommends choosing a shock
pallet option to protect your equipment during transport.
NOTE: HPE Network Racks are designed for dense network equipment. These racks have
the front vertical rails moved back 75mm to facilitate front to rear cabling and have
additional bristle covered cable access slots in the front and on top of the racks to prevent
mixing of hot and cold air and to allow for large cable bundles.
Step 7: Select rack power distribution unit (PDU) (optional)
NOTE: A pair of PDUs must be ordered for AC feed redundancy.
NOTE: Additional HPE Power Distribution Units (PDUs) are available than those listed below. For a complete list of all Hewlett
Packard Enterprise PDUs, please visit: https://www.hpe.com/us/en/integrated-systems/rack-power-cooling.html .
HPE Power
HPE Basic 1 Phase Power Distribution Units
Distribution Units HPE Basic 4.9kVA/L6-30P 24A/208V Outlets (24) C13 (6) C19/Vertical NA/JP PDU
(PDUs)
HPE Basic 8.3kVA/CS8265C 40A/208V Outlets (30) C13 (6) C19/Vertical NA PDU
HPE Basic 7.3kVA/60309 3-wire 32A/230V Outlets (24) C13 (6) C19/Vertical INTL PDU
HPE Basic 9.2kVA/50A Terminal Block 40A/230V Outlets (30) C13 (6) C19/Vertical WW
PDU
HPE Basic 11kVA/60309 63A 3-wire 48A/230V Outlets (30) C13 (6) C19/Vertical INTL
PDU
HPE Basic Modular 2.8kVA/L5-30P 24A/120V Outlets (4) C19/Horizontal NA/JP PDU
HPE Basic Modular 3.6kVA/60320 C20 Detachable 16A/230V Outlets (2) C19/Horizontal
WW PDU
HPE Basic Modular 4.9kVA/L6-30P 24A/208V Outlets (4) C19/Horizontal NA/JP Core Only
PDU
HPE Basic Modular 4.9kVA/L6-30P 24A/208V Outlets (4) C19/Horizontal NA/JP PDU
HPE Basic Modular 7.3kVA/60309 3-wire 32A/230V Outlets (4) C19/Horizontal INTL PDU
HPE Basic Modular 7.3kVA/60309 3-wire 32A/230V Outlets (4) C19/Horizontal INTL Core
Only PDU
HPE Basic 9.2kVA/Terminal Block 40A/230V (4) C19/Horizontal WW PDU
HPE Basic Modular 8.3kVA/CS8265C 40A/208V Outlets (4) C19/Horizontal NA/JP PDU
HPE Basic Modular 8.3kVA/CS8265C 40A/208V Outlets (4) C19/Horizontal NA/JP PDU
NOTE: Where indicated with an asterisk (*), model includes both core power distribution
unit and either 2 or 4 7-outlet extension bars with C-13 outlets.
H5M59A
H5M60A
H5M70A
H5M75A
H5M71A
252663-D71
252663-B24
252663-D74
252663-D72
252663-B31
252663-B33
252663-B21
252663-D75
252663-D73
Basic Power Distribution Units – Three Phase
Page 20
QuickSpecs
HPE Synergy 12000 Frame
Related Options
HPE Basic 3Ph 8.6kVA/L15-30P 24A/208V Outlets (24) C13 (6) C19/Vertical NA/JP PDU
HPE Basic 3Ph 8.6kVA/L21-30P 24A/120-208V Outlets (24) C13 (3) C19 (3) 520R/Vertical NA/JP PDU
HPE Basic 3Ph 11kVA/60309 5-wire 16A/230V Outlets (24) C13 (6) C19/Vertical INTL
PDU
HPE Basic 3Ph 11kVA/60309 5-wire 16A/230V Outlets (36) C13 (6) C19/Vertical INTL
PDU
HPE Basic 3Ph 11kVA/60309 16A/240V Outlets (36) C13 (6) C19/Vertical NA PDU
HPE Basic Modular 3Ph 8.6kVA/L15-30P 24A/208V Outlets (6) C19/Horizontal NA/JP PDU
HPE Basic Modular 3Ph 11kVA/60309 5-wire 16A/230V Outlets (6) C19/Horizontal INTL
PDU
HPE Basic Modular 3Ph 14.4kVA/CS8365C 40A/208V Outlets (6) C19/Horizontal NA/JP
PDU
HPE Basic Modular 3Ph 17.3kVA/60309 60A 4-wire 48A/208V Outlets (6) C19/Horizontal
NA/JP PDU
HPE Basic Modular 3Ph 22kVA/60309 5-wire 32A/230V Outlets (6) C19/Horizontal INTL
PDU
Monitored Power Distribution Units – Single Phase
HPE Metered 4.9kVA/L6-30P 24A/208V Outlets (20) C13 (4) C19/Vertical NA/JP PDU
HPE Metered 7.3kVA/60309 32A 3-wire/230V Outlets (20) C13 (4) C19/Vertical INTL PDU
HPE Metered 7.3kVA/60309 32A 3-wire/230V Outlet (32) C13 (4) C19/Vertical INTL PDU
HPE Metered 8.3kVA/CS8265C 40A/208V Outlets (30) C13 (3) C19/Vertical NA PDU
Monitored Power Distribution Units – Three Phase
HPE Metered 3Ph 8.6kVA/L21-30P 24A/120-208V Outlets (18) C13 (3) C19 (3) 520R/Vertical NA/JP PDU
HPE Metered 3Ph 8.6kVA/L15-30P 24A/208V Outlets (18) C13 (3) C19/Vertical NA/JP
PDU
HPE Metered 3Ph 11kVA/60309 5-wire 16A/230V Outlets (18) C13 (3) C19/Vertical INTL
PDU
HPE Metered 3Ph 11kVA/60309 5-wire 16A/230V Outlets (30) C13 (3) C19/Vertical INTL
PDU
HPE Metered 3Ph 14.4kVA/CS8365C 40A/208V Outlets (12) C13 (12) C19/Vertical NA/JP
PDU
HPE Metered 3Ph 16.6kVA/60309 32A-30A 5-wire 24A/230V Outlets (12) C13 (12)
C19/Vertical NA/JP PDU
HPE Metered 3Ph 16.6kVA/60309 32A-30A 5-wire 24A/230V Outlets (30) C13 (3)
C19/Vertical NA/JP PDU
HPE Metered 3Ph 17.3kVA/60309 60A 4-wire 48A/208V Outlets (24) C13 (3) C19/Vertical
NA/JP PDU
HPE Metered 3Ph 17.3kVA/60309 60A 4-wire 48A/208V Outlets (12) C13 (12)
C19/Vertical NA/JP PDU
HPE Metered 3Ph 17.3kVA/60309 60A 4-wire 48A/208V Outlets (12) C13 (12)
C19/Vertical NA/JP PDU
HPE Metered 3Ph 22kVA/60309 5-wire 32A/230V Outlets (12) C13 (12) C19/Vertical INTL
PDU
HPE Metered 3Ph 22kVA/60309 5-wire WT 32A/230V Outlets (12) C13 (12) C19/Vertical
INTL PDU
H5M62A
H5M64A
H5M72A
H5M73A
H5M67A
AF512A
AF513A
AF519A
AF511A
AF518A
D9N47A
D9N48A
D9N50A
D9N49A
D9N53A
D9N51A
D9N55A
D9N57A
D9N58A
D9N62A
D9N61A
D9N54A
D9N59A
G9Z07A
D9N60A
G9Z08A
Page 21
QuickSpecs
HPE Synergy 12000 Frame
Related Options
HPE Metered 3Ph 22kVA/60309 5-wire 32A/230V Outlet (30) C13 (3) C19/Vertical INTL
PDU
Managed Power Distribution Units – Single Phase
HPE Metered Switched 4.9kVA/L6-30P 24A/208V Outlets (20) C13 (4) C19/Vertical NA/JP
PDU
HPE Metered Switched 7.3kVA/60309 3-wire 32A/230V Outlets (20) C13 (4) C19/Vertical
INTL PDU
Managed Power Distribution Units – Three Phase
HPE Metered Switched 3Ph 8.6kVA/L15-30P 24A/208V Outlets (18) C13 (6) C19/Vertical
NA/JP PDU
HPE Metered Switched 3Ph 8.6kVA/L21-30P 24A/208V Outlets (20)C13 (3)C19 (1)520R/Vertical NA/JP PDU
HPE Metered Switched 3Ph 11kVA/60309 5-wire 16A/230V Outlets (21) C13 (3)
C19/Vertical INTL PDU
HPE Metered Switched 3Ph 14.4kVA/CS8365C 40A/208V Outlets (12) C13 (12)
C19/Vertical NA/JP PDU
HPE Metered Switched 3Ph 17.3kVA/60309 4-wire 48A/208V Outlets (12) C13 (12)
C19/Vertical NA/JP PDU
Intelligent Power Distribution Units – Single Phase
HPE Intelligent Modular 4.9kVA/L6-30P 24A/208V Outlets (6) C19/Horizontal NA/JP PDU
HPE Intelligent Modular 7.3kVA/60309 3-wire 32A/230V Outlets (6) C19/Horizontal INTL
PDU
HPE Intelligent Modular 8.3kVA/CS8265C 40A/208V Outlets (6) C19/Horizontal NA/JP PDU
HPE Intelligent Modular 4.9kVA/L6-30P 24A/208V Outlets (20) C13 (6) C19/Horizontal
NA/JP PDU
HPE Intelligent Modular 7.3kVA/60309 3-wire 32A/230V Outlets (6) C19/Horizontal INTL
PDU Kit
Intelligent Power Distribution Units – Three Phase
HPE Intelligent Modular 3Ph 8.6kVA/L15-30P 24A/208V Outlets (6) C19/Horizontal NA/JP
PDU
HPE Intelligent Modular 3Ph 11kVA/60309 5-wire 16A/230V Outlets (6) C19/Horizontal
INTL PDU
HPE Intelligent Modular 3Ph 14.4kVA/CS8365C 40A/208V Outlets (6) C19/Horizontal
NA/JP PDU
HPE Intelligent Modular 3Ph 17.3kVA/60309 60A 4-wire 48A/208V (6) C19/Horizontal
NA/JP PDU
HPE Intelligent Modular 3Ph 17.3kVA/60309 30A 5-wire 24A/240V (6) C19/Horizontal
NA/JP PDU
HPE Intelligent Modular 3Ph 22kVA/60309 5-wire 32A/230V Outlets (6) C19/Horizontal
INTL PDU
HPE Intelligent Modular 3Ph 17.3kVA/IEC 60309 60A 4-wire 48A/208V (12)
C19/Horizontal NA/JP PDU
HPE Intelligent Modular 3Ph 22kVA/60309 5-wire 32A/230V Outlets (12) C19/Horizontal
INTL PDU
HPE Intelligent Modular 3Ph 8.6kVA/L15-30P 24A/208V Outlets (20) C13 (6)
C19/Horizontal NA/JP PDU
D9N56A
H8B50A
H8B51A
H8B52A
H8B53A
H8B54A
H8B55A
H8B56A
AF520A
AF525A
AF521A
AF531A
AF534A
AF522A
AF526A
AF533A
AF523A
AF901A
AF527A
AF535A
AF538A
AF532A
Page 22
QuickSpecs
HPE Synergy 12000 Frame
Related Options
NOTE: Where indicated with an asterisk (*), kits include one Core Unit, LED Display, and 4
Standard (non-intelligent) Extension Bars.
Step 8: Select an uninterruptible power system (UPS) (optional)
NOTE: Additional HPE Uninterruptable Power Systems (UPSs) are available other than those listed here. For a complete list of
all Hewlett Packard Enterprise UPS options and additional information, please visit https://www.hpe.com/us/en/integratedsystems/rack-power-cooling.html .
HPE
Uninterruptible
Power Systems
(UPSs)
HPE R5000 Uninterruptible Power System (UPS)
HPE R5000 3U L630 High Voltage NA/JP Uninterruptible Power System
HPE R5000 3U IEC309-32A High Voltage INTL Uninterruptible Power System
AF460A
AF461A
HPE R7000 Uninterruptible Power System (UPS)
HPE R7000 4U 50A High Voltage NA/JP Uninterruptible Power System
HPE R7000 4U IEC-32A High Voltage INTL Uninterruptible Power System
AF462A
AF463A
HPE R8000/3 Uninterruptible Power System (UPS)
HPE R8000/3 8000kVA Three Phase NA 6U Rackmount Uninterruptible Power System
HPE R8000/3 8000kVA Three Phase INTL 6U Rackmount Uninterruptible Power System
AF431A
AF432A
HPE R12000/3 Uninterruptible Power System (UPS)
HPE R12000/3 12000VA Three Phase NA 6U Rackmount Uninterruptible Power System
HPE R12000/3 12000VA Three Phase INTL 6U Rackmount Uninterruptible Power System
AF429A
AF430A
HPE DirectFlow Three Phase Uninterruptible Power System (UPS)
HPE R12000 DirectFlow - 1U Rackmount Uninterruptible Power System
HPE R18000 DirectFlow - 2U Rackmount Uninterruptible Power System
G9Y75A
AF479A
NOTE: HPE DirectFlow UPS models can be configured with either 1 or 2 valve-regulated
lead-acid (VRLA) or Lithium-Ion (Li-Ion) batteries. You will also need to select the
appropriate power I/O module for your region or country.
Step 9: Select power cords (optional)
NOTE: For additional power cable information, please
visit: http://h18000.www1.hp.com/products/servers/proliantstorage/power-protection/options/power-cable.html.
HPE Intelligent
Power
Distribution Units
Power cords
(HPE C19 to C20)
Intelligent PDU Power Jumper Cords
NOTE: These power cables are designated by bright blue IEC connectors.
HPE 1.37m 250V 16A C19-C20 WW Single IPD Enabled Jumper Cord
HPE 1.37m 250V 16A C19-C20 WW 3PC Kit IPD Enabled Jumper Cord
HPE 2.0m 250V 16A C19-C20 WW Single IPD Enabled Jumper Cord
HPE 2.0m 250V 16A C19-C20 WW 3PC Kit IPD Enabled Jumper Cord
HPE 2.5m 250V 16A C19-C20 WW Single IPD Enabled Jumper Cord
HPE 2.5m 250V 16A C19-C20 WW 3PC Kit IPD Enabled Jumper Cord
HPE 3.0m 250V 16A C19-C20 WW Single IPD Enabled Jumper Cord
HPE 3.0m 250V 16A C19-C20 WW 3PC Kit IPD Enabled Jumper Cord
TK744A
TK745A
TK738A
TK739A
TK740A
TK741A
TK742A
TK743A
Page 23
QuickSpecs
HPE Synergy 12000 Frame
Related Options
HPE Power
PDU Power Jumper Cords
Distribution Units HPE C19 - C20 WW 250V 16Amp Flint Gray 1.20m Jumper Cord
Power Cords
HPE C19 - C20 WW 250V 16Amp Flint Gray 2.0m Jumper Cord
(HPE C19 to C20)
HPE C19 - C20 WW 250V 16Amp 2.5m Jumper Cord
HPE C19 - C20 WW 250V 16Amp 4.5m Jumper Cord
AF575A
AF574A
295633-B22
E7804A
HPE HVDC Power High Voltage Direct Current (HVDC) Power Jumper Cords
Cords
HP SAFDGRID-SAFDGRID 277V 15Amp DC 0.76m Jumper Cord
HP SAFDGRID-SAFDGRID 277V 15Amp DC 1.37m Jumper Cord
HP SAFDGRID-SAFDGRID 277V 15Amp DC 2.0m Jumper Cord
HP SAFDGRID-LS-25 277V 15Amp AC 0.76m Jumper Cord
HP SAFDGRID-LS-25 277V 15Amp AC 1.37m Jumper Cord
HP SAFDGRID-LS-25 277V 15Amp AC 2.0m Jumper Cord
J6W98A
J6W99A
J6X00A
J6X01A
J6X02A
J6X03A
Additional HPE
Power Cords
HPE High Line Power Cords 200 - 240V AC
HPE C19 -Nema L6-30P US/CA 250V 16Amp 4.5m Power Cord
HPE C19 - Nema L6-20P NA/JP 250V 20Amp High Voltage 3.6m Power Cord
HPE C19 - NBR-14136 BR 250V 16Amp 2.5m Power Cord
HPE C19 - BS-1363/A UK/HK/SG 250V 13Amp 3.6m Power Cord
HPE C19 - CEE-VII EU 250V 16Amp 3.6m Power Cord
HPE C19 - AS3112-3 AU/NZ 250V 15Amp 3.6m Power Cord
HPE C19 - SABS-164 ZA 250V 16Amp 3.6m Power Cord
HPE C19 - CEI-23-50 IT/CL 250V 16Amp 3.6m Power Cord
HPE C19 - IEC-309 DK/SE/AR 250V 16Amp 3.6m Power Cord
HPE C19 - IS-1293 IN/PK/BD 250V 16Amp 2.5m Power Cord
HPE C19 - ISI-32 IL 250V 16Amp 2.5m Power Cord
HPE C19 - GB-1002 CN 250V 16Amp 2.5m Power Cord
E7805A
AF593A
AF592A
359615-031
AF576A
AF577A
AF579A
AF580A
AF581A
AF582A
AF583A
AF584A
HPE Synergy Spares Options
HPE Synergy
12000 Frame
Options
For purchasing any of the following option spares please go to HPE Parts Store at
https://parts.hpe.com/Hpparts/Default.aspx?mscssid=08A46B692773436E9BC247202
DCEFC43&cc=GB&lang=EN
HPE Synergy Fan Module Option Kit
NOTE: 10 Fans come included in every Synergy 12000 Frame
HPE Synergy Compute Bay Half-Height Blank Option Kit
NOTE: 1 blank for half-height server bay
807967-B21
HPE Synergy Compute Bay Full-Height Blank-Coupler Option Kit
NOTE: The coupler option is intended for use with two Half-Height Bay Blanks (2x
813561-001) to for a single full-height bay blank for insertion in open full-height Bay.
417894-B21
813561-B21
Page 24
QuickSpecs
HPE Synergy 12000 Frame
Related Options
NOTE: For optimal cooling and operating performance there should be no open bays or
slots.
HPE Synergy Half-Shelf Option Kit
NOTE: The half-shelf option is designed for mixing half-height and full-height compute
nodes in a specific zone. With the middle shelf removed between Bays 1 & 2 and 7 & 8 you
may install two full-height Compute modules in what become Bays 1 & 2 for full-heights. If
you need to mix half-height with full-height Compute nodes you can install the Half-Shelf
option in the leftmost slots between 1 & 7 bays. This allows for two half-height compute
module in the leftmost slots 1 & 7 with a full-height compute note in bay 2(2&8). This is
the only Zone that allows mixing of compute modules.
NOTE: For optimal cooling and operating performance there should be no open bays or
slots.
HPE Synergy Full-Shelf Option Kit
NOTE: The full-shelf is for spares purposes or to replace lost shelves. The Frame is
designed with 3 of these shelves inserts to accommodate 12 half-height compute modules.
NOTE: For optimal cooling and operating performance there should be no open bays or
slots.
HPE Synergy Frame Lift Handle Option Kit
NOTE: The Lift Handle option comes with four handles that latch to the side of the Synergy
Frames for a 4 person lift. CAUTION: All Frames, chassis or enclosures generally require
multiple people when lifting from the shipping container to a work bench, table or into the
rack. The Synergy 12000 Frame requires 4 people to lift when empty to install.
NOTE: It is HIGHLY RECOMMENDED that any HPE Synergy be empty of all key compute,
interconnects, power supplies, fans and options prior to attempting to lift and place into a
rack system.
HPE Synergy Interconnect Module/Switch Blank Option Kit
NOTE: This is a single blank for open interconnect module/switch bays.
NOTE: For optimal cooling and operating performance there should be no open bays or
slots.
HPE Synergy Frame Rack Rail Option Kit
NOTE: This is a single rack rail kit for installing Synergy Frames into desired racking
solutions.
HPE Synergy Appliance Bay Blank Option Kit
NOTE: This blank is for an open Appliance Bay.
NOTE: For optimal cooling and operating performance there should be no open bays or
slots.
HPE Synergy Frame Link Module Bay Blank Option Kit
NOTE: This blank is for an open Appliance Bay.
NOTE: For optimal cooling and operating performance there should be no open bays or
slots.
HPE Synergy Power Supply Bay Blank Option Kit
NOTE: This blank is for an open Appliance Bay.
NOTE: For optimal cooling and operating performance there should be no open bays or
slots.
813570-001
813569-001
813567-001
813563-001
813568-001
813570-001
813560-001
813564-001
HPE Tape Backup NOTE: For the complete range of tape drives, autoloaders, libraries and media
see: https://www.hpe.com/us/en/storage/storeever-tape-storage.html. For hardware and software
compatibility of Hewlett Packard Enterprise tape backup products
see: http://www.hpe.com/storage/spock.
HPE StoreEver LTO-6 Ultrium 6250 Tape Drive in a 1U Rack Mount Kit
C0L99A
Page 25
QuickSpecs
HPE Synergy 12000 Frame
Related Options
HPE System
Management
Options
HPE StoreEver LTO-6 Ultrium 6250 Internal Tape Drive
EH969A
HPE StoreEver LTO-6 Ultrium 6250 External Tape Drive
EH970A
NOTE: The HPE Synergy 12000 Frame comes with a single USB and DisplayPort ports on the Front Panel of
the Frame and on each of the Frame Link Modules in the rear. Synergy Console and OneView must be
accessed at the Front Panel of the Frame that has the Synergy Composer installed. When multiple Frames
are linked properly and the Synergy Composer/OneView is running you may access Synergy Console from
any Front Panel, Frame Link Module or network connections.
NOTE: For additional information regarding Rack Options, please see the following
URL: https://www.hpe.com/us/en/integrated-systems/rack-power-cooling.html .
HPE 1U Rackmount Keyboard with USB
NOTE: Single to multi-port USB Adaptor required for Keyboard and Mouse.
HPE USB US Keyboard/Mouse Kit
HPE USB UK Keyboard/Mouse Kit
HPE USB FR Keyboard/Mouse Kit
HPE USB ES Keyboard/Mouse Kit
HPE USB DE Keyboard/Mouse Kit
HPE USB JP Keyboard/Mouse Kit
HPE USB IT Keyboard/Mouse Kit
HPE USB CN Keyboard/Mouse Kit
HPE USB AE Keyboard/Mouse Kit
HPE USB RU Keyboard/Mouse Kit
HP KVM Console USB 2.0 Virtual Media CAC Interface Adapter
HPE LCD8500 1U Rackmount Console Kit Models
HP LCD8500 1U US Rackmount Console Kit
HP LCD8500 1U UK Rackmount Console Kit
HP LCD8500 1U DE Rackmount Console Kit
HP LCD8500 1U FR Rackmount Console Kit
HP LCD8500 1U JP Rackmount Console Kit
HP LCD8500 1U RU Rackmount Console Kit
HP LCD8500 1U INTL Rackmount Console Kit
HP LCD8500 1U US TAA Rackmount Console Kit
NOTE: The DisplayPort cable option below is required for any of these Display solutions
631341-B21
631344-B21
631346-B21
631348-B21
631358-B21
631360-B21
631362-B21
631364-B21
638212-B21
638214-B21
AF629A
AF630A
AF631A
AF632A
AF633A
AF642A
AF643A
AF644A
AF645A
HPE LCD8500 1U Rackmount Console Kit Models
HP Kit LCD 1.83m Latch Display Port Cable
G7T29A
HPE KVM Analog Console Switches
HP 1x4 USB/PS2 KVM Console Switch
HP 0x1x8 G3 KVM Console Switch
HP 0x2x16 G3 KVM Console Switch
HP TAA 0x2x16 G3 KVM Console Switch
AF611A
AF651A
AF652A
AF653A
HPE KVM Analog Console Switches with Virtual Media
HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software
AF618A
Page 26
QuickSpecs
HPE Synergy 12000 Frame
Related Options
HPE Synergy
Services
HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software
AF619A
HPE KVM IP Console Switches
HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software
AF620A
AF621A
AF622A
HP Synergy Proactive Care Services
HPE 3 Year Proactive Care 24x7 Synergy 1200 Frame Service
HPE 3 Year Proactive Care Advanced 24x7 Synergy 1200 Frame Service
H0VL5E
H0VL8E
Deployment/Installation & Start-up Services
HPE FE Synergy Initial Frame Package 4 Service
HPE FE Synergy Add-on Frame Package 4 Service
HPE Synergy First Frame Startup Service
HPE Synergy Additional Frame Startup Service
HA454A1-300
HA454A1-301
U8JM3E
U8JM4E
Page 27
QuickSpecs
HPE Synergy 12000 Frame
Power Supply Specifications
NOTE: HPE highly recommends using the HPE Power Advisor tool to ensure the number of power supply options you have
selected can fully support your Synergy Frame configuration and to review maximum system power ratings for facilities planning
purposes. HPE Power Advisor is available at: http://www.hpe.com/info/hpepoweradvisor.
HPE 2650 Watts Titanium Hot Plug AC Power Supply
Part Number
798095-B21
Input Voltage Range (Vrms)
200-240
Frequency Range (Nominal) (Hz)
50 - 60
Nominal Input Voltage (Vrms)
200
208
220
Maximum Rated Output Wattage
2650
2650
2650
Nominal Input Current (A rms)
14.4
13.9
13.1
Maximum Rated Input Wattage
2879
2877
2873
Rating (Watts)
Maximum Rated VA (Volt-Amp)
2882
2882
2878
Efficiency (%)
92%
92.1%
92.2%
Power Factor
0.9
Leakage Current (mA)
0.87
0.9
0.96
Maximum Inrush Current (A peak)
30
Maximum Inrush Current duration
0.2
(mS)
Maximum British Thermal Unit Rating
9823
9817
9803
(BTU-Hr)
•
230
2650
12.5
2869
240
2650
12.0
2866
2875
92.4%
2871
92.5
1
1.04
9790
9780
See the “Technical Specifications” section for additional power specifications.Accept IEC C19-C20 and C19-C20 Intelligent
Power Distribution Unit (iPDU) power cables. One WW 250W C19-C20 2.0m (non-iPDU) power cable is included per
supported power supply. iPDU power cables are ordered separately.Accept IEC C19-C20 power cables. One WW 250W
C19-C20 2.0m power cable is included per supported power supply. Rated 200 to 240 VAC line-to-neutral. The Frame will
not operate from higher line-to-line voltage with the WYE wall plug configuration. This power input module is configured to
provide 200 to 240 VAC to the power supplies.Each Frame must include only one type of power supply. Mixing of power
supplies is not supported, except during hot swaps to different level or higher efficient power supplies. The Onboard
Administrator will exhibit a mismatch error due to mixed power supplies until all power supplies are matched.Power cables
with APP Saf-D-Grid connectors are ordered separately.
Page 28
QuickSpecs
HPE Synergy 12000 Frame
HPE Synergy Frame Device Bay Numbering and Population Guidelines
Mixed Configuration - Full Height and Half-Height Population rules
Frame Device Bay Options: Half Height, Full Height, Half Height Double Wide, Full Height Double Wide
NOTE: The 12000 Frame is divided into 6 quadrants by the vertical and horizontal support metalwork. The horizontal supports
or shelves are removable to support full height devices. Only quadrants 1 and 4 can mix Full-Height with Half-Height Compute
modules with an optional Half Shelf kit.
Page 29
QuickSpecs
HPE Synergy 12000 Frame
Technical Specifications
HPE Synergy
12000 Frame
Dimensions
Height
Width
Depth
17.4 in (442 mm)
18.98 in (482 mm)
36.88 in (936 mm)
Shipping
Dimensions
Height
Width
Depth
30.13 in ( mm)
24.50 in (mm)
40.50in (mm)
Frame Weight
Unboxed
137 lb (62 kg)
Shipping
495 lb ( kg)
NOTE: The Frame weight above includes only an empty Frame- Compute, storage, power supplies, fans,
interconnect modules, Management Appliances and Frame Link Modules are not included. The weight for
power supplies, fans, and other option(s) is listed below. Please see the specific compute module and
interconnect module QuickSpecs for their respective weight.
4.8 lbs (2 kg)
Power Supply
Weight
(minimum 1,
maximum 6)
HPE Synergy Fan 1.5 lbs (1 kg)
Weight
(minimum 0,
maximum 10)
3 lbs (1.4 kg)
Management
Appliances
(minimum 1,
maximum 2)
521 lb (236 kg)
Frame Link Modules 1.4 lbs (1 kg)
Unboxed
(minimum 1
maximum 2)
Shipping
495 lb ( kg)
Maximum Frame
Weight
(approximate)
NOTE: The approximate maximum Frame weight above includes 12 480 Compute Modules, 6 six power
supplies, 10 fans, 6 interconnect modules, 2 Composer Management Appliances and 2 Frame Link
Modules.
50° to 95° F (10° to 35° C)
Temperature Range Operating
Non-Operating
-22° to 140° F (-30° to 60° C)
10 to 90% relative humidity (Rh), 28°C (82.4°F)
Relative Humidity Operating
maximum wet bulb temperature, non-condensing.
Non-Operating
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F)maximum wet bulb temperature, noncondensing.
NOTE: Operating temperature has an altitude derating of 1.8° F (1° C) per 1,000 ft (304.8 m). No direct
sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is
30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum
temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.
Page 30
QuickSpecs
HPE Synergy 12000 Frame
Technical Specifications
NOTE: For detailed environmental and other installation requirements, please see the “HPE Site Planning
Guide” at http://www.hpe.com/support.
Environmentalfriendly Products
and Approach
End-of-life
Management and
Recycling
Hewlett Packard Enterprise offers end-of-life Hewlett Packard Enterprise product
return, trade-in, and recycling programs in many geographic areas. For trade-in
information, please go to http://www.hpe.com/info/recycle To recycle your product,
please go to: http://www.hpe.com/info/recycle or contact your nearest Hewlett
Packard Enterprise sales office. Products returned to Hewlett Packard Enterprise will
be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This information
(product disassembly instructions) is posted on the Hewlett Packard Enterprise web
site at: http://www.hpe.com/info/recycle. These instructions may be used by
recyclers and other WEEE treatment facilities as well as Hewlett Packard Enterprise
OEM customers who integrate and re-sell Hewlett Packard Enterprise equipment.
Page 31
QuickSpecs
HPE Synergy 12000 Frame
Summary of Changes
Date
05-Jun-2017
Version History
From Version 7 to 8
Action
Changed
Added
Removed
13-Jan-2017
From Version 6 to 7
Changed
26-Sep-2016
From Version 5 to 6
Changed
Added
29-Jul-2016
From Version 4 to 5
Changed
Removed
06-Jun-2016
From Version 3 to 4
Changed
Added
Removed
15-Apr-2016
31-Mar-2016
From Version 2 to 3
From Version 1 to 2
Changed
Changed
Added
Description of Change
Service and Support, Related Options, Power Supply Specifications, and
Technical Specifications sections were updated.
SKUs added in Related Options section:
798349-B21, 798342-B21, AF575A, J6W98A, J6W99A, J6X00A, J6X01A,
J6X02A, J6X03A.
Obsolete SKUs were deleted in Related Options section:
794502-B21, AF900A, AF537A, H0VL6E, H0VL9E.
Service and Support, All Synergy Frame Models, and Related Options sections
were updated.
QuickSpecs sections were updated.
SKU added in Related Options:
838327-B21
QuickSpecs deleted.
SKU deleted:
777434-B21
Related Options section was updated.
SKUs added in Related Options section:
799330-B21
Obsolete SKUs were deleted:
804937-B21, 779224-B21, AF902A, AG072A, AG073A, AG084A, AG086A.
Format changes all over document to solve HTML/PB issues.
Overview and Related Options sections were updated.
SKUs added to QuickSpecs:
797740-B21, 797738-B21, 797739-B21, 798096-B21, 798095-B21,
804353-B21, 804937-B21, 804942-B21, 861412-B21, 861413-B21,
861414-B21, 794502-B21, 779215-B21, 779218-B21, 835386-B21,
755984-B21, 757323-B21, 755985-B21, 759557-B21, K2Q83A, K2Q84A,
K2Q86A, D4U69A, D4U69AAE, 779227-B21, 777430-B21, 777434-B21,
777452-B21, 777454-B21, 794538-B21, 817040-B21, K2Q87A, 804095B21, 804098-B21, 804155-B21, 804101-B21, 804104-B21, 804107-B21,
804110-B21, 835386-B21, H6J67A, H6J68A, H6J69A, H6J70A, BW899A,
BW900A, BW907A, BW908A, BW910A, BW966A, BW919A, BW920A,
BW968A, TK756A, TK766A, TK760A, TK772A, BW913A, BW914A,
BW936A, H5M59A, H5M60A, H5M70A, H5M75A, H5M71A, 252663-D71,
252663-B24, 252663-D74, 252663-D72, 252663-B31, 252663-B33,
252663-B21, 252663-D75, 252663-D73, H5M62A, H5M64A, H5M72A,
H5M73A, H5M67A, AF512A, AF513A, AF519A, AF511A, AF518A,
D9N47A, D9N48A, D9N50A, D9N49A, D9N53A, D9N51A, D9N55A,
D9N57A, D9N58A, D9N62A, D9N61A, D9N54A, D9N59A, G9Z07A,
D9N60A, G9Z08A, D9N56A, H8B50A, H8B51A, H8B52A, H8B53A,
H8B54A, H8B55A, H8B56A, AF520A, AF525A, AF521A, AF531A, AF534A,
AF522A, AF526A, AF900A, AF533A, AF523A, AF902A, AF901A, AF527A,
AF535A, AF537A, AF538A, AF532A, AF460A, AF461A, AF462A, AF463A,
AF431A, AF432A, AF429A, AF430A, G9Y75A, AF479A, TK744A, TK745A,
TK738A, TK739A, TK740A, TK741A, TK742A, TK743A, AF575A, AF574A,
295633-B22, E7804A, E7805A, AF593A, AF592A, 359615-031, AF576A,
AF577A, AF579A, AF580A, AF581A, AF582A, AF583A, AF584A, 807967B21, 813561-B21, 417894-B21, 813570-001, 813569-001, 813567-001,
813563-001, 813568-001, 813560-001, 813564-001, C0L99A, EH969A,
EH970A, AG072A, AG073A, AG084A, AG086A, 631341-B21, 631344-B21,
Page 32
QuickSpecs
HPE Synergy 12000 Frame
Summary of Changes
1-Dec-2015
Version 1
Created
631346-B21, 631348-B21, 631358-B21, 631360-B21, 631362-B21,
631364-B21, 638212-B21, 638214-B21, AF629A, AF630A, AF631A,
AF632A, AF633A, AF642A, AF643A, AF644A, AF645A, G7T29A, AF611A,
AF651A, AF652A, AF653A, AF618A, AF619A, AF620A, AF621A, AF622A,
H0VL5E, H0VL6E, H0VL8E, H0VL9E, HA454A1-300, HA454A1-301,
U8JM3E, U8JM4E.
New QuickSpecs
Sign up for updates
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
c04815113 - 15410 - Worldwide - V8 - 5-June-2017
Page 33
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising