led alv par20 accent lights (xalv al) – line voltage

led alv par20 accent lights (xalv al) – line voltage
LED ALV PAR20 ACCENT LIGHTS (XALV AL) – LINE VOLTAGE
SHIELD/LENS ASSEMBLY – Available in six combinations to maximize design flexibility.
Shield is machined from premium alloys to match housing. Lenses are tempered glass.
Select R – Recessed flat lens or F – Flush machined lens (for improved drainage).
SSDR – Short Shield – Recessed Lens; SSUF – Short Shield – Flush Lens
SCDR – Collar Shield – Recessed lens & Aqueducts; SCUA – Collar Shield – Flush Lens
and Aqueducts; S3DR – 30° Cutoff Shield – Recessed Lens; S3UF – 30° Cutoff Shield
– Flush Lens
EXPECTED LIFE - Minimum 60,000 hours, depending upon the ambient operating
temperature of the installation location.
LED MODULE - LED PAR20 Line Voltage, module offers a choice of 3 color temperatures;
Neutral White (4000K), Warm White (3000K) and Very Warm (2700K), CRI>80 (nominal).
The lamp features 4 “field selectable” light levels of 100%, 80%, 55% & 18%, via an easily
accessible push button.
OPTICS / DISTRIBUTION - Choice of 4 beam patterns; Spot (SP) = 15°, Narrow Flood (NF)
= 23°, Flood (FL) = 35° and Wide Flood (WF) = 51°, that puts the light where it is needed,
in the most efficient way possible. XALV Sign Lights are easy to adjust, aim and lock in
place.
DIMENSIONS
XALV AL PAR20 LED SCDR
7.41” (188mm)
2.72” (69mm)
WIRING - Pre-wired with 200°C rated Tefzel wire.
HOUSING - Aluminum housing is CNC machined from premium 6061-T6 alum solid bar
alloy.
MOUNTING - RM – Rear Mount arms have a ½” NPSM threaded stainless steel knuckle for
attachment to J-box or mounts.
2” (51mm)
ELECTRICAL - 120 VAC, 50/60 HZ input. Complies with UL8750 safety regulations and with
ANSI/IEEE C62.41 Class A operation.
XALV AL PAR20 LED S3DR
7.92” (201mm)
2.72” (69mm)
LED ENGINE - Powered by a fully integrated, constant current, line voltage Class 2 LED
driver, with active power factor correction. Phase dimmable.
OPERATING TEMPERATURE - -40°C to 55°C (-40°F to +131°F)
FINISH - Standard finishes BRS - Bronze Smooth, WHS – White Smooth and BKS – Black
Smooth. MSV – Metallic Silver, SVG – Satin Verde Green and Graphite are textured
finishes. All finishes are in a UV resistant, thermoset polyester powder coat finish, which
provides durable protection from environmental conditions, corrosion and the elements.
2” (51mm)
XALV AL PAR20 LED SSDR
6.37” (162mm)
WARRANTY - Limited 5-year warranty.
2.72” (69mm)
EXTRA VALUE FEATURES:
• Premium aluminum alloys protected by a chromate conversion process and polyester
powder coat finish, provide XALV Series with incredible corrosion resistance, ensuring a
long life and trouble free operation.
2” (51mm)
• Precision O-ring sealing system between the lens and housing are high temperature
silicone or Viton fluoroelastomer material, prevents dust and water ingress.
• Posi-Seal provides reliable protection against water and dirt intrusion. No RTV silicone is
used to seal XALV fixtures.
• Available Spread Lenses, Color Filters, and Louvers expand performance.
• Shield/Lens combinations give designers unequalled choice and flexibility.
PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed
photometric data.
SHIPPING WEIGHT - 5 lbs.
LISTINGS - UL listed to UL8750. Suitable for wet locations.
This product, or selected versions of this product, meet the standards listed below. Please consult factory
for your specific requirements.
ARRA
wet location Funding Compliant
Project Name
Catalog #
Fixture Type
IP66
04/29/15
© 2015
LSI INDUSTRIES INC.
LED ALV PAR20 ACCENT LIGHTS (XALV AL) – LINE VOLTAGE
PRODUCT ORDERING INFORMATION
TYPICAL ORDER EXAMPLE:
Prefix
XALV
(LED ALV Line Voltage)
Type
AL - Accent
Light
XALV
AL
Light
Source
LED20 1
LED20 NW FL 120V
Color
Temp2
NW - Neutral White
(4000K)
WW - Warm White
(3000K)
VW - Very Warm
White (2700K)
Beam
Angle3
SP - Spot Flood
NF - Narrow Flood
FL - Flood
WF - Wide Flood
Voltage
120V
S3UF
Shield(s)
SSDR - Short Shield Recessed Lens
SSUF - Short Shield Flush Lens
SCDR - Collar Shield Recessed Lens Aqueducts
SCUA - Collar Shield Flush Lens Aqueducts
S3DR - 30° Cutoff Shield Recessed Lens
S3UF - 30° Cutoff Shield Flush Lens
MSV SPB
Mounting
Accessories
Finish
BKS - Black Smooth
BRS - Bronze Smooth
WHS - White Smooth
SVG - Satin Verde
Green Textured
MSV - Metallic Silver
Textured
GPT - Graphite
Textured
NO - None
Mounting Spikes
SPB - Heavy Duty Spike for Line or Low
JEP12 - 12" PVC Ground Conduit Mount
JEP18 - 18" PVC Ground Conduit Mount
Junction Boxes
CFH LB - Composite Grade Mount J-Box
ACCESSORIES4
CFX20 - PAR20 Color Filters5
HL20 - PAR20 Hexcell Louvers
LS20 - PAR20 Linear Spread Lenses
PS20 - PAR20 Prismatic Spread Lenses
NOTES:
1. PAR20 - LED Module provides choice of 4 field selectable light levels: 100%, 80%, 55% & 18%.
2. Color Temperatures; NW = 4,000K, WW = 3,000K, VW = 2,700K.
3. Beam Angle: SP = 15 degrees, NF = 23 degrees, FL = 35 degrees, WF = 51 degrees.
4. Only Single Filter/Louver Accessory Can Be Installed in Shield
5. Color Filters - Replace "X" with required filter - R-Red, G-Green, B-Blue, Y-Yellow.
JEP Mounting Spike
Junction Box
Project Name
Catalog #
Spike (SPB)
CFH LB
Fixture Type
04/29/15
© 2015
LSI INDUSTRIES INC.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising