Technical Sheet
network
accessories
8-Port 10/100Mbps PoE Switch
TPE-S80 (V1.0R)
The 8-Port 10/100Mbps PoE Switch, model TPE-S80, reduces equipment
and installation costs by delivering data and power over existing Ethernet
cables to Power over Ethernet (PoE) enabled devices such as Access
Points and IP Cameras.
Boost office efficiency and reduce network congestion with a total
switching capacity of 1.6Gbps. LED indicators display device status for
easy power management and troubleshooting. An internal power supply
reduces clutter and delivers 15.4 Watts to each PoE port. A convenient
on/off button is located on the back of the switch. Non-PoE devices can
connect to the switch—auto-sensing PoE technology cuts power to nonPoE connected devices. Use TRENDnet's PoE Splitter with the TPE-S80
to install non-PoE devices in remote locations.
Features
• IEEE 802.3af Power over Ethernet (PoE) compliant
• 8 x 10/100Mbps Auto-MDIX RJ-45 PoE ports
• On/Off power switch
• Provides 15.4 watts per PoE port
• Supports PoE Powered Device (PD) classification
• 1.6Gbps switching fabric
• Full wire-speed non-blocking reception and transmission
• Store-and-forward switching method
• Back pressure Flow Control for half-duplex mode
• IEEE 802.3x Flow Control for full-duplex mode
• 512Kbits RAM Data Buffer and 1K MAC address entries
• Diagnostic LEDs (Power, Link/Activity, PoE Act/Status)
• Plug and Play
• Sturdy metal enclosure
• Mounting hardware included
• 3-year limited warranty
TPE-S80
rev: 04.27.2010
8-Port 10/100Mbps PoE Switch
TPE-S80 (V1.0R)
SPECIFICATIONS
Hardware
Standards
• IEEE 802.3 10Base-T • IEEE802.3u 100Base-TX
Ports
• 8 x 10/100Mbps Auto-MDIX PoE ports
Power Switch
• On/Off power switch
Data Transfer Rate
• Ethernet: 10/20Mbps (half/full duplex)
Data RAM Buffer
• 512Kbits
Address Table
• 1K MAC entries
Switch Fabric
• 1.6Gbps
Power
• 100~240VAC 50/60Hz, internal universal switching power
Diagnostic LEDs
• Power, Link/Activity, PoE Act/Status
Power Consumption
• 6 Watts max. (no Power Device (PD) connected)
Temperature
• Operating: 0° ~ 45°C (32° ~ 113°F) • Storage: -10° ~ 70°C (14° ~ 158°F)
Humidity
• 10%- 95% (non-condensing)
Dimensions
Weight
• 266 x 160 x 44 mm (10.5 x 6.3 x 1.73 in.)
• 1.4 kg (3.1 lb)
Certifications
• CE, FCC
• IEEE 802.3af Power over Ethernet
• IEEE 802.3x Flow Control
• Fast Ethernet: 100/200Mbps (half/full duplex)
• 132 Watts max. (8 x 15.4 watts PoE devices connected)
Hardware
• Up to 15.4 watts per port; PD classification • Polymer switch for short protection • PoE: pin 3,6 for power+ and pin 1,2 for power-
Power over Ethernet
PACKAGE CONTENTS
NETWORKING SOLUTIONS
• TPE-S80
8-Port 10/100Mbps PoE Switch
(TPE-S80)
• Multi-Language Quick Installation Guide
• Rack mounting kit
• Power cord
8-Port Gigabit Web Smart PoE Switch
(TPE-80WS)
ProView PoE Internet Camera
(TV-IP512P)
ProView Megapixel PoE Internet Camera
(TV-IP522P)
ProView PoE Internet Camera
(TV-IP512P)
RELATED PRODUCTS
TV-IP512P
ProView PoE Internet Camera
TPE-102S
Power over Ethernet Splitter
TPE-80WS
8-Port Gigabit Web Smart PoE Switch
Power + Ethernet Data
CONTACT INFORMATION
20675 Manhattan Place,Torrance, CA 90501 USA
Tel: 1-310-961-5500
Fax: 1-310-961-5511
Web: www.trendnet.com
Email: sales@trendnet.com
1-888-326-6061
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet
products and is subject to change at any time, without notice. For the most recent product information please visit http://www.trendnet.com.
Copyright © TRENDnet. All Rights Reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising