Expert Solutions from the Laundry Experts

Expert Solutions from the Laundry Experts
On-Premises
Washers & Dryers
Commercial Topload Washer
Commercial Frontload Washer
Commercial Stack Washer/Dryer
Commercial Dryer
Commercial Stack Dryer
Expert Solutions from the Laundry Experts
Dryers
A
t UniMac, washers and dryers are considered more than just laundry equipment.
They are key players in the success of onpremises laundry facilities and as such, must
continuously achieve high levels of efficiency,
quality and durability. UniMac always has
maintained a standard of excellence in laundry equipment manufacturing that is recognized around the world. With over 50 years of
engineering expertise, you can be assured
that you are getting the best washers and
dryers on the market that will meet your
needs now and in the future.
Extra-Large 7.0 cu. ft. Capacity
UniMac’s extra-large
capacity drying cylinder
needs very little space,
yet easily handles sizeable wash loads. Smooth
baffles tumble loads
freely for maximum dry
air movement.
Large Door Opening
Stack Washer/Dryers
Floor Space
By stacking the dryer on top
of the washer, you gain a large
amount of floor space. Dream
of the possibilities for how you
could use the extra space.
These units are the ultimate
space savers. You can place
laundry equipment in places
that were never before possible.
The utility connections are identical
to those used of residential style
equipment. There is no extra work
or floor space required.
For ease in loading
and unloading,
UniMac designed
its dryer with a
2.06 sq. ft. door
opening, one of
the largest in
the industry.
Front Serviceability
UniMac’s two-piece front panel increases ease of
service, which can save time and expense. Motor,
blower, heating element, gas valve and thermostats
can be serviced through the lower panel without
disconnecting the door switch.
Frontload Washers
Topload Washers
Utility Cost Savings
Rugged Suspension
System
Utility costs are a big part of your
laundry dollar. UniMac can help you
reduce your costs with our energy
efficient frontload washers.
The frontload washer is ENERGY
STAR® qualified and excels in
energy efficiency. The listing was
earned by our washer’s low usage
of hot water, low motor energy consumption and high
moisture removal. The washer’s super high spin speed
reduces drying time and energy costs.
You could save hundreds of dollars per year on electricity,
gas, water and sewer fees. These savings are due to less
hot water, less overall water consumption and shorter
drying times.
Saves Time
If you believe time is money, then you will be excited
to experience how UniMac’s frontload washers cut time
from every wash and dry cycle. The super high spin speed
of 1000 RPM removes much more water than topload
washers. This greatly reduces the drying time. In fact,
our tests show drying time is reduced as much as 30%!
UniMac incorporates a liquid-filled
balance ring at the top of the tub along
with a 7-point suspension system to
handle bulky loads with ease.
Front Serviceability
UniMac engineered its washer
to easily handle large loads while
occupying minimal floor space.
Our 100% front serviceable
design eliminates the need for
extra floor space around the unit,
making it ideal for small or large
laundry rooms. Simple removal
of the front panel or control hood
provides easy access to all major
components from the installed
position, which can save you
time and money.
Front Controls and Supply Dispenser
The unique front control design allows for convenient
storage on top or the washer can easily fit under a
counter. Add your detergent,
bleach or softener with the
automatic front mount supply
dispenser, walk away and
the washer will take care of
the rest.
Liquid Supply Injector
Some installations may require a connection to an automated liquid supply system. There are two supply signals
and two injection ports included within the washer.
Durable Stainless Steel Tub
To keep linens looking their best
longer, UniMac’s washer features
a stainless steel tub that will
actually become smoother with
each use, so it won’t pill, fray or
snag fabric. In fact, stainless steel
won’t corrode, chip, crack or pit
under normal use and it is
extremely rust resistant. That’s
why we provide a lifetime warranty.
Heavy-Duty See-Through Door
Loading and unloading are a breeze
with UniMac’s extra-wide 15 1/2"
door, which boasts a 180° swing.
A heavy-duty stainless steel hinge
ensures the door will stand up to the
rigors of the on-premises laundry.
The see-through door also enables
users to monitor the wash process.
Agitator
For superior washability, UniMac’s wavy
vane agitator offers a 210˚ agitation stroke
that delivers maximum side-to-side,
top-to-bottom washing action to get
linens their cleanest.
Specifications
Washer
Topload
UWT821
Frontload
FTUA1
Width - in (mm)
25 5/8" (651)
26 7/8" (683)
Depth - in (mm)
28" (711)
Height - in (mm)
43" (1092)
Height to Work Surface - 36" (914)
in (mm)
Operation
Manual Control
Dryers
Single Rear Control
UDE807 (Electric)
UDG809 (Gas)
Single Front Control
FEU17 (Electric)
FGU17 (Gas)
Stack
USE807 (Electric)
USG809 (Gas)
28" (711)
Width - in (mm)
26 7/8" (683)
26 7/8" (683)
26 7/8" (683)
43" (1092)
Depth - in (mm)
28" (711)
28" (711)
28" (711)
Height - in (mm)
43" (1092)
43" (1092)
76 5/8" (1946)
Height to Work Surface - 36" (914)
in (mm)
43" (1092)
N/A
7.0 (198)
7.0 (198)
36" (914)
Manual Control
Basket Volume cu. ft. (liters)
2.8 (79)
2.84 (80)
Cylinder Volume cu. ft. (liters)
7.0 (198)
Spin Speed - RPM
High Speed 710
Low Speed 473
500, 650,
1000
Color
White
White
White
Motor HP
60 Hz: 1/3 HP, 5.5 amp
60 Hz: 1/3 HP, 5.5 amp
60 Hz: 1/3 HP, 5.5 amp
Hot, Warm and Cold
Hot/Cold, Warm/Warm
Warm/Cold, Cold/Cold
Motor RPM
60 Hz: 1725
60 Hz: 1725
60 Hz: 1725
Btu Per Hour
25,000 (6,300 kcal)
25,000 (6,300 kcal)
25,000 (6,300 kcal)
Electrical Requirements Gas:
120/60/1 - 15 amp
Electric:
120/240/60/1 - 30 amp
120/208/60/1 - 30 amp
Heating Element
60 Hz: 5350W, 240V
(Electric)
Also 4750W, 208V
Gas:
120/60/1 - 15 amp
Electric:
120/240/60/1 - 30 amp
120/208/60/1 - 30 amp
60 Hz: 5350W, 240V
Also 4750W, 208V
Gas:
120/60/1 - 15 amp
Electric:
120/240/60/1 - 30 amp
120/208/60/1 - 30 amp
60 Hz: 5350W, 240V
Also 4750W, 208V
Type of Gas
(Gas models only)
Factory-equipped for
natural/mixed gas
Convertible to LP gas*
Factory-equipped for
natural/mixed gas
Convertible to LP gas*
Factory-equipped for
natural/mixed gas
Convertible to LP gas*
Utility Connections in (mm)
3/8" NPT (9.5)
3/8" NPT (9.5)
3/8" NPT (9.5)
Air Outlet Diameter in (mm)
4" (102)
4" (102)
4" (102)
Water Temperatures
Cycles
Normal, Permanent Press
or Delicate
Regular, Permanent Press,
Delicate, Rinse and Spin
or Spin
Cycle Time
16-31 minutes
plus fill time
27 minutes
plus fill time
Water Pressure psi (bar)
Pressure fill 20 to 120
(1.4/8.3)
Pressure fill 20 to 120
(1.4/8.3)
Cycle Cue Lights
Yes
Yes
Top and Lid Finish
Porcelain
Porcelain
Color
White
White
Motor
Motor
2-speed, 1/2 HP reversing
for 1725 or 1140 RPM
Multi-speed 3/4 HP
Electrical Specifications 120/60/1-15 amp
120/60/1-15 amp
Net Weight (Approx.) lb (kg)
190 (86)
240 (109)
Dom. Shipping Weight
(Approx.) - lb (kg)
210 (95)
260 (118)
Agency Approvals
UL
UL, CULUS
Exhaust Airflow**
220 (105 liters/sec.)
220 (105 liters/sec.)
220 (105 liters/sec.)
Net Weight (Approx.) lb (kg)
Dom. Shipping Weight
(Approx.) - lb (kg)
Gas: 140 (64)
Electric: 135 (61)
Gas: 150 (68)
Electric: 145 (66)
Gas: 155 (70)
Electric: 150 (68)
Gas: 165 (75)
Electric: 160 (73)
Gas: 275 (125)
Electric: 265 (120)
Gas: 290 (132)
Electric: 280 (127)
Agency Approvals
UL, CSA
UL, CSA
UL, CSA
Stack Washer/Dryer
Strong Limited Parts Warranty
UniMac proudly offers the following limited warranties on its topload washer:
Through Three Years* — any part on the entire machine.
Through Five Years* — the transmission assembly.
Through Lifetime* — the stainless steel wash tub.
UniMac proudly offers the following limited warranties on its frontload washer:
Through One Year* — any part on the entire machine.
UniMac proudly offers the following limited warranty on its commercial dryer:
Through Three Years* — any part on the entire machine.
LTUA7 (Electric)
LTUA9 (Gas)
Width - in (mm)
26 7/8" (683)
Depth - in (mm)
28" (711)
Height - in (mm)
76 5/8" (1946)
Color
White
Net Weight (Approx.) lb (kg)
Gas: 365 (166)
Electric: 360 (163)
Dom. Shipping Weight
(Approx.) - lb (kg)
Gas: 395 (179)
Electric: 390 (177)
Agency Approvals
UL, CSA
*Parts only, labor not included. See UniMac Warranty Bond for specifics.
* IMPORTANT: Any product revisions or conversions must be made by
the Manufacturer’s Authorized Dealers, Distributors, or local service
personnel. Any approvals may vary depending on configuration.
Consult factory for details.
** Measured at point of exit from dryer. Maximum exhaust static back pressure:
60 Hz: 0.6" W.C. Gas models are certified by CSA International; electric
models are Underwriters Laboratories certified.
Due to continuous product improvements, design and specifications are
subject to change without notice. The quality management systems at
all Alliance Laundry Systems manufacturing facilities have been registered
as ISO 9001:2000 compliant. Features and certifications may vary by model.
©Copyright 2006 Alliance Laundry Systems LLC
www.uniwash.com
Alliance Laundry Systems
Shepard Street, Ripon, WI 54971 Telephone: 1-800-587-5458
AU06-210
®
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising