Projector Features
ed
ad
o
nl
ow
D
m
fro
re
or
nb
de
an
.v
w
w
w
e
.b
User's Guide
o
nl
ow
D
ad
Contents
ed
2
m
fro
Projector Parts and Functions ........................................................ 11
Projector Parts - Front.................................................................................................................. 11
Projector Parts - Rear.................................................................................................................... 12
Projector Parts - Base ................................................................................................................... 13
Projector Parts - Control Panel ................................................................................................. 14
Projector Parts - Remote Control ............................................................................................ 15
Setting Up the Projector
18
Projector Placement ........................................................................ 19
e
Quick and Easy Setup..................................................................................................................... 8
Easy Wireless Projection................................................................................................................ 8
Flexible Connectivity ...................................................................................................................... 9
Connect with Computers........................................................................................................ 9
Connect with Mobile Devices............................................................................................. 10
.b
Projector Features.............................................................................. 8
re
or
nb
7
de
Introduction to Your Projector
Connecting to a Composite Video Source..................................................................... 26
Connecting to External USB Devices ..................................................................................... 27
USB Device Projection ........................................................................................................... 27
Connecting to a USB Device ............................................................................................... 27
Disconnecting a USB Device ............................................................................................... 28
Connecting to a Document Camera ...................................................................................... 28
an
.v
6
w
w
w
Notations Used in This Guide
Installing Batteries in the Remote Control .................................... 29
Remote Control Operation.............................................................. 30
Opening the Lens Cover .................................................................. 31
Using Basic Projector Features
32
Turning On the Projector ................................................................ 33
Home Screen................................................................................................................................... 34
Turning Off the Projector ................................................................ 36
Selecting the Language for the Projector Menus ......................... 37
Projection Modes ............................................................................. 38
Changing the Projection Mode Using the Remote Control.......................................... 38
Changing the Projection Mode Using the Menus ............................................................ 38
Projector Setup and Installation Options............................................................................. 19
Projection Distance....................................................................................................................... 20
Adjusting the Image Height............................................................ 40
Projector Connections ..................................................................... 21
Auto V-Keystone ............................................................................................................................ 41
Correcting the Image Shape with the Horizontal Keystone Slider............................. 41
Correcting the Image Shape with the Keystone Buttons .............................................. 42
Correcting the Image Shape with Quick Corner ............................................................... 43
Connecting to a Computer........................................................................................................ 21
Connecting to a Computer for VGA Video and Audio .............................................. 21
Connecting to a Computer for USB Video and Audio............................................... 22
Connecting to a Computer for HDMI Video and Audio ........................................... 23
Connecting to Smartphones or Tablets................................................................................ 23
Connecting to Video Sources ................................................................................................... 24
Connecting to an HDMI Video Source ............................................................................ 24
Connecting to a Component-to-VGA Video Source .................................................. 25
Connecting to an S-Video Video Source ........................................................................ 26
Image Shape ..................................................................................... 41
Resizing the Image with the Zoom Ring........................................ 46
Resizing the Image with the Buttons ............................................. 47
Focusing the Image Using the Focus Ring..................................... 48
Selecting an Image Source .............................................................. 49
Image Aspect Ratio .......................................................................... 51
o
nl
ow
D
ad
Contents
ed
3
m
fro
Unsupported Input Source Combinations for Split Screen Projection..................... 58
Split Screen Projection Restrictions........................................................................................ 59
Projecting a PC Free Presentation.................................................. 60
Supported PC Free File Types................................................................................................... 60
Precautions on PC Free Projection ......................................................................................... 60
Starting a PC Free Slide Show .................................................................................................. 61
Starting a PC Free Movie Presentation ................................................................................. 62
PC Free Display Options ............................................................................................................. 63
Shutting Off the Image and Sound Temporarily .......................... 65
Stopping Video Action Temporarily .............................................. 66
Zooming Images............................................................................... 67
Using the Remote Control as a Wireless Mouse............................ 68
Using the Remote Control as a Pointer.......................................... 70
e
Projecting Two Images Simultaneously ........................................ 57
.b
56
re
or
Adjusting Projector Features
Password Security Types ............................................................................................................ 76
Setting a Password.................................................................................................................. 76
Selecting Password Security Types................................................................................... 77
Entering a Password to Use the Projector ..................................................................... 78
Locking the Projector's Buttons............................................................................................... 78
Unlocking the Projector's Buttons .................................................................................... 79
Installing a Security Cable.......................................................................................................... 80
nb
Controlling the Volume with the Volume Buttons ....................... 55
de
Changing the Color Mode ......................................................................................................... 53
Available Color Modes................................................................................................................. 53
Setting Auto Iris ............................................................................................................................. 53
Projector Security Features............................................................. 76
an
.v
Color Mode ....................................................................................... 53
w
w
w
Changing the Image Aspect Ratio.......................................................................................... 51
Available Image Aspect Ratios ................................................................................................. 51
Projected Image Appearance with Each Aspect Mode .................................................. 52
Using the Projector on a Network
81
Wireless Network Projection........................................................... 82
Installing the Wireless LAN Module ....................................................................................... 82
Selecting Wireless Network Settings Manually.................................................................. 83
Selecting Wireless Network Settings in Windows ............................................................ 85
Selecting Wireless Network Settings in OS X...................................................................... 85
Setting Up Wireless Network Security................................................................................... 85
Using a QR Code to Connect a Mobile Device............................... 87
Using Quick Wireless Connection (Windows Only)....................... 89
Monitoring and Controlling the Projector
90
EasyMP Monitor ............................................................................... 91
Controlling a Networked Projector Using a Web Browser........... 92
Setting Up Projector Network E-Mail Alerts.................................. 94
Network Projector E-mail Alert Messages............................................................................ 94
Saving a User's Logo Image ............................................................ 71
Setting Up Monitoring Using SNMP............................................... 95
Color Difference Correction when Projecting from Multiple
Projectors.......................................................................................... 73
Using ESC/VP21 Commands ........................................................... 96
Setting the Projector ID .............................................................................................................. 73
Selecting the Projector You want to Operate .................................................................... 73
Matching Multiple-Projector Display Quality ..................................................................... 75
Setting Up for Using ESC/VP21 Commands........................................................................ 96
ESC/VP21 Command List............................................................................................................ 96
Communications Protocol ......................................................................................................... 96
o
nl
ow
D
ad
Contents
ed
4
m
fro
Air Filter and Vent Maintenance .................................................. 125
de
an
.v
98
w
w
w
Adjusting the Menu Settings
Using the On-screen Keyboard..................................................... 100
Projector Lamp Maintenance ....................................................... 127
Input Signal Settings - Signal Menu............................................. 103
Projector Feature Settings - Settings Menu ................................ 105
Projector Setup Settings - Extended Menu ................................. 107
e
Image Quality Settings - Image Menu ......................................... 101
.b
Available Text Using the On-screen Keyboard................................................................ 100
re
or
nb
Using the Projector's Menus ........................................................... 99
Cleaning the Air Filter and Vents.......................................................................................... 125
Replacing the Air Filter ............................................................................................................. 125
Replacing the Lamp ................................................................................................................... 127
Resetting the Lamp Timer ....................................................................................................... 130
Replacing the Remote Control Batteries ..................................... 132
Solving Problems
133
Projector Network Settings - Network Menu.............................. 109
Projection Problems ...................................................................... 134
Network Menu - Basic Menu .................................................................................................. 109
Network Menu - Wireless LAN Menu .................................................................................. 110
Network Menu - Security Menu ............................................................................................ 111
Network Menu - Mail Menu .................................................................................................... 112
Network Menu - Others Menu ............................................................................................... 113
Network Menu - Reset Menu.................................................................................................. 113
Projector Indicators Status ........................................................... 135
Projector Setup Settings - ECO Menu .......................................... 115
Projector Information Display - Info Menu ................................. 116
Info Menu - Projector Info Menu .......................................................................................... 116
Event ID Code List................................................................................................................. 117
Projector Reset Options - Reset Menu ......................................... 118
Copy Menu Settings to Another Projector (Batch Setup).......... 119
Performing Batch Setup Using a USB Flash Drive.......................................................... 119
Performing Batch Setup Using a USB Cable..................................................................... 120
Batch Setup Error Notification ......................................................................................... 121
Maintaining the Projector
122
Using the Projector Help Displays................................................ 137
Solving Image or Sound Problems............................................... 138
Solutions When No Image Appears..................................................................................... 138
Solutions When Image is Incorrect Using the USB Display Function ..................... 138
Solutions When "No Signal" Message Appears ............................................................... 139
Displaying From a Laptop.................................................................................................. 139
Displaying From a Mac Laptop........................................................................................ 139
Solutions When "Not Supported" Message Appears .................................................... 140
Solutions When Only a Partial Image Appears................................................................ 140
Solutions When the Image is not Rectangular ................................................................ 140
Solutions When the Image Contains Noise or Static..................................................... 141
Solutions When the Image is Fuzzy or Blurry .................................................................. 141
Solutions When the Image Brightness or Colors are Incorrect ................................. 142
Solutions to Sound Problems................................................................................................. 142
Solutions When Image File Names are not Displayed Correctly in PC Free......... 143
Solving Projector or Remote Control Operation Problems ....... 144
Cleaning the Lens........................................................................... 123
Solutions to Projector Power or Shut-Off Problems...................................................... 144
Solutions to Problems with the Remote Control............................................................ 144
Solutions to Password Problems........................................................................................... 145
Cleaning the Projector Case.......................................................... 124
Solving Network Problems ........................................................... 146
o
nl
ow
D
ad
Contents
ed
5
m
fro
re
or
nb
de
an
.v
w
w
w
Solutions When You Cannot Access the Projector Through the Web ................... 146
Solutions When Network Alert E-Mails are not Received............................................ 146
Solutions When the Image Contains Static During Network Projection............... 146
e
.b
Appendix
147
Optional Accessories and Replacement Parts............................. 148
Optional Accessories ................................................................................................................. 148
Replacement Parts...................................................................................................................... 148
Screen Size and Projection Distance............................................ 149
Supported Monitor Display Resolutions ..................................... 153
Projector Specifications ................................................................ 155
Connector Specifications ......................................................................................................... 156
External Dimensions ...................................................................... 157
USB Display System Requirements .............................................. 159
List of Safety Symbols (corresponding to IEC60950-1 A2) ........ 160
Glossary .......................................................................................... 162
Notices ............................................................................................ 164
FCC Compliance Statement.................................................................................................... 164
Indication of the manufacturer and the importer in accordance with
requirements of EU directive.................................................................................................. 165
Restriction of Use ........................................................................................................................ 165
Operating System References................................................................................................ 165
Trademarks.................................................................................................................................... 165
Copyright Notice......................................................................................................................... 166
Copyright Attribution................................................................................................................ 166
ed
ad
o
nl
ow
D
m
fro
re
or
nb
de
an
.v
w
w
w
Notations Used in This Guide
e
.b
Safety Symbols
The projector and its manuals use graphical symbols and labels to indicate content that tells you how to use the projector safely.
Read and carefully follow the instructions that are marked with these symbols and labels to avoid injury to persons or damage to property.
Warning
Caution
This symbol indicates information that, if ignored, could possibly result in personal injury or even death.
This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
General Information Notations
This label indicates procedures that may result in damage or injury if sufficient care is not taken.
Attention
This label indicates additional information that may be useful to know.
[Button name]
Indicates the name of the buttons on the remote control or the control panel.
Example: [Esc] button
Menu/Setting name
Indicates projector menu and setting names.
Example:
Select the Image menu
s Image > Advanced
This label indicates links to the related pages.
s
This label indicates a page where detailed information regarding a topic can be found.
ed
ad
o
nl
ow
D
m
fro
e
g Related Links
• "Projector Features" p.8
• "Projector Parts and Functions" p.11
.b
Refer to these sections to learn more about your projector's features and part names.
re
or
nb
de
an
.v
w
w
w
Introduction to Your Projector
o
nl
ow
D
ad
Projector Features
ed
8
m
fro
an
.v
Easy Wireless Projection
re
or
nb
de
• EasyMP Network Projection to share the projector over the network and
project images from any of the computers on the network.
See the EasyMP Network Projection Operation Guide for details.
e
.b
g Related Links
• "Quick and Easy Setup" p.8
• "Easy Wireless Projection" p.8
• "Flexible Connectivity" p.9
w
w
w
This projector has a quick and easy setup, and flexible connectivity features.
Quick and Easy Setup
• Direct Power On feature to turn on the projector as soon as you plug it in.
• Auto Power On feature to turn on the projector when the projector detects
an image signal from the port you specified as the Auto Power On source.
• Home screen feature to easily select an input source and useful functions.
• Real-time, automatic vertical keystone correction always displays a
rectangular screen (Auto V-Keystone).
• Horizontal keystone adjuster allows you to quickly correct horizontal
distortion in the projected image.
• Epson iProjection to connect your projector and mobile device wirelessly
using the app available on App Store or Google play.
a
g Related Links
• "Auto V-Keystone" p.41
• "Projector Setup Settings - Extended Menu" p.107
• "Turning On the Projector" p.33
• "Correcting the Image Shape with the Horizontal Keystone Slider" p.41
• "Correcting the Image Shape with Quick Corner" p.43
Any fees incurred when communicating with the App Store or
Google play are the responsibility of the customer.
• EasyMP Multi PC Projection to project up to four images at the same time
by splitting the projected screen. You can project images from computers
on the network, or from smartphones or tablet devices on which Epson
iProjection is installed.
ad
o
nl
ow
D
9
ed
Projector Features
m
fro
w
w
w
g Related Links
• "Wireless Network Projection" p.82
• "Using a QR Code to Connect a Mobile Device" p.87
re
or
nb
de
an
.v
See the EasyMP Multi PC Projection Operation Guide for details.
e
.b
Flexible Connectivity
This projector supports a wide variety of easy-to-use connectivity options as
shown below.
g Related Links
• "Connect with Computers" p.9
• "Connect with Mobile Devices" p.10
Connect with Computers
Connect with one USB cable to project images and output audio (USB
Display).
a
• When projecting images using a wireless LAN, you must install the
Epson 802.11b/g/n wireless LAN module, and then set up your
projector and computer for wireless projection (EB-W31/EBX36/EB-X31/EB-S31/EB-U04/EB-W04/EB-X04/EB-S04/EBU130/EB-W130/EB-X130/EB-S130/EB-X350/EB-X300/EB-S300).
The Epson 802.11b/g/n wireless LAN module may not be included
with your projector.
• Some models have built-in wireless LAN modules (EB-U32/EBW32).
• You can download the necessary software and manuals from the
following Web site:
http://www.epson.com/
ad
o
nl
ow
D
10
ed
Projector Features
m
fro
re
or
nb
de
e
.b
• HDMI/MHL port to connect an MHL cable to the mobile device and to the
projector.
an
.v
w
w
w
Connect with Mobile Devices
o
nl
ow
D
ad
Projector Parts and Functions
ed
11
m
fro
Air exhaust vent
Exhaust vent for air used to cool the projector
internally.
re
or
A
nb
g Related Links
• "Projector Parts - Front" p.11
• "Projector Parts - Rear" p.12
• "Projector Parts - Base" p.13
• "Projector Parts - Control Panel" p.14
• "Projector Parts - Remote Control" p.15
Function
de
Name
an
.v
w
w
w
The following sections explain the projector parts and their functions.
e
.b
Warning
Do not look into the vents. If the lamp
explodes, gases may escape and small
fragments of glass may be scattered which
could cause an injury. Contact a doctor if any
fragments of broken glass are inhaled or get
into the eyes or mouth.
Projector Parts - Front
All of the features in this guide are explained using illustrations of EB-W04
unless otherwise mentioned.
Caution
While projecting, do not put your face or
hands near the air exhaust vent, and do not
place objects that may become warped or
damaged by heat near the vent. Hot air from
the air exhaust vent could cause burns,
warping, or accidents to occur.
B
A/V Mute slide lever
Slide the knob to open and close the lens cover.
C
Foot release lever
Press the foot release lever to extend and retract the
front adjustable foot.
D
Lens cover
Close when not using the projector to protect the lens.
By closing it during projection you can hide the image
and the sound.
E
Front adjustable foot
When the projector is set up on a surface such as a
desk, extend the foot to adjust the position of the
image.
F
Lens
Images are projected from here.
G
Remote receiver
Receives signals from the remote control.
H
Horizontal keystone
adjuster
Corrects horizontal distortion in the projected image.
I
Air intake vent (air
filter)
Takes in air to cool the projector internally.
J
Air filter cover
Open to access the air filter.
o
nl
ow
D
ad
Projector Parts and Functions
ed
12
m
fro
Operates the projector.
M
Zoom ring
(EB-U32/EBW32/EB-W31/EBX36/EB-X31/EBU04/EB-W04/EBX04/EB-U130/EBW130/EB-X130/EBX350/EB-X300)
Adjusts the image size.
N
Focus ring
Adjusts the image focus.
O
Lamp cover
Open to access the projector's lamp.
g Related Links
• "Projector Indicators Status" p.135
• "Resizing the Image with the Zoom Ring" p.46
• "Focusing the Image Using the Focus Ring" p.48
e
Control panel
.b
L
re
or
The security slot is compatible with the Microsaver
Security System manufactured by Kensington.
nb
Security slot
de
K
EB-U32/EB-U04/EB-U130
Name
Function
A
Power inlet
B
Wireless LAN module Secures the wireless LAN module cover.
fixing screw
(EB-W31/EBX36/EB-X31/EBS31/EB-W04/EBX04/EB-S04/EBW130/EB-X130/EBS130/EB-X350/EBX300/EB-S300)
C
Audio ports
Inputs audio from equipment connected to the
Computer, S-Video, or Video port.
D
Video port
Inputs composite video signals from video sources.
E
Remote receiver
Receives signals from the remote control.
F
Speaker
Outputs audio.
Projector Parts - Rear
EB-W32/EB-W31/EB-X36/EB-X31/EB-S31/EB-W04/EB-X04/EB-S04/EBW130/EB-X130/EB-S130/EB-X350/EB-X300/EB-S300
an
.v
Function
w
w
w
Name
Connects the power cord to the projector.
o
nl
ow
D
ad
Projector Parts and Functions
ed
13
m
fro
w
w
w
Inputs image signals from a computer and component
video signals from other video sources.
I
S-Video port
(EB-W32/EBW31/EB-X36/EBX31/EB-S31/EBW04/EB-X04/EBS04/EB-W130/EBX130/EB-S130/EBX350/EB-X300/EBS300)
For S-video signals from video sources.
J
USB-B port
Connects a USB cable to the computer to project
computer images or to use the Wireless Mouse
function.
K
USB-A port
Connects a USB memory device or a digital camera
and projects movies or images using PC Free.
Connects the optional Document Camera.
Connects the wireless LAN module (EB-W31/EBX36/EB-X31/EB-S31/EB-U04/EB-W04/EB-X04/EBS04/EB-U130/EB-W130/EB-X130/EB-S130/EBX350/EB-X300/EB-S300).
Connects the optional Quick Wireless Connection USB
Key.
e
Computer port
.b
H
re
or
Inputs video signals from HDMI compatible video
equipment and computers.
The HDMI/MHL port can also input video signals
from MHL (Mobile High-Definition) compatible
mobile devices.
This projector is compatible with HDCP.
nb
HDMI port
(EB-X36/EB-X31/EBS31/EB-W04/EBX04/EB-S04/EBW130/EB-X130/EBS130/EB-X350/EBX300/EB-S300)
HDMI/MHL port
(EB-W32/EB-W31)
HDMI1,
HDMI2/MHL port
(EB-U32/EB-U04/EBU130)
G
g Related Links
• "Using the Remote Control as a Wireless Mouse" p.68
• "Installing a Security Cable" p.80
• "Projecting a PC Free Presentation" p.60
de
Function
an
.v
Name
Projector Parts - Base
Name
Function
A
Ceiling mount fixing
points (three points)
Attach the optional ceiling mount here when
suspending the projector from a ceiling.
B
Security cable
attachment point
Pass a commercially available wire lock through here
and lock it in place.
o
nl
ow
D
ad
Projector Parts and Functions
ed
14
m
fro
an
.v
w
w
w
Function
Name
B
[Enter] button [
C
Keystone adjustment
buttons and arrow
buttons
Displays the Keystone screen allowing you to correct
keystone distortion.
Selects menu items while displaying the projector's
menu or help.
D
[Esc] button
Stops the current function.
Moves back to the previous menu level while
displaying the projector's menu.
E
Volume buttons and
arrow buttons
Wide/Tele buttons
• EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EBU04/EB-W04/EB-X04/EB-U130/EB-W130/EBX130/EB-X350/EB-X300:
Front adjustable foot
When the projector is set up on a surface such as a
desk, extend the foot to adjust the position of the
image.
g Related Links
• "Installing a Security Cable" p.80
Projector Parts - Control Panel
Enters the current selection and moves to the next level
while displaying the projector's menu or help.
Optimizes Tracking, Sync., and Position in the
projector's Signal menu while projecting an analog
RGB signal from the Computer port.
From now on, referred to as the [Enter] button.
e
D
]
.b
When the projector is set up on a surface such as a
desk, turn to extend and retract the feet to adjust the
horizontal tilt.
re
or
Rear feet
nb
C
Function
de
Name
: Decreases the volume.
: Increases the volume.
• EB-S31/EB-S04/EB-S130/EB-S300:
: Enlarges the size of the projected image.
Name
A
[Source Search]
button
: Reduces the size of the projected image.
Corrects keystone distortion in the horizontal direction
when the Keystone screen is displayed.
Selects menu items while displaying the projector's
menu or help.
Function
Changes to the next input source.
F
[Menu] button
Displays and closes the projector's menu.
G
[Home] button
Displays and closes the Home screen.
H
Power button [
I
Indicators
]
Turns the projector on or off.
From now on, referred to as the power button.
Indicates the projector's status.
ad
o
nl
ow
D
15
ed
Projector Parts and Functions
m
fro
an
.v
w
w
w
Projector Parts - Remote Control
re
or
nb
de
e
.b
g Related Links
• "Home Screen" p.34
• "Input Signal Settings - Signal Menu" p.103
• "Projector Indicators Status" p.135
• "Correcting the Image Shape with the Keystone Buttons" p.42
o
nl
ow
D
ad
Projector Parts and Functions
ed
16
m
fro
Function
Turns the projector on or off.
From now on, referred to as the power button.
P
[Home] button
Displays and closes the Home screen.
Q
[Freeze] button
Pauses or resumes images.
re
or
]
Name
nb
Power button [
Function
de
A
an
.v
w
w
w
Name
e
.b
B
[Computer] button
Selects the Computer port as the image source.
R
Adjusts the speaker volume.
C
[Video] button
Switches the image source between the S-Video, Video
and HDMI port.
[Volume] up/down
buttons
S
[Pointer] button
Displays the on-screen pointer.
T
[Esc] button
Stops the current function.
Moves back to the previous menu level while
displaying the projector's menu.
Acts as a mouse's right button when using the Wireless
Mouse function.
U
[ID] button
Hold down this button and press the numeric buttons
to select the ID for the projector you want to operate
using the remote control.
D
Numeric buttons
Enters numbers in the projector's menu while holding
down the [Num] button.
E
[Auto] button
Optimizes Tracking, Sync., and Position in the
projector's Signal menu while projecting an analog
RGB signal from the Computer port.
F
[Aspect] button
Changes the aspect mode.
G
[Num] button
Hold down this button to enter numbers using the
numeric buttons.
H
[Menu] button
Displays and closes the projector's menu.
V
[Color Mode] button
Changes the color mode.
I
Arrow buttons
Selects menu items while displaying the projector's
menu or help.
W
[MHL Menu] button
Displays the settings menu for the device linked to the
projector's HDMI/MHL port.
J
[Enter] button [
Enters the current selection and moves to the next level
while displaying the projector's menu or help.
Acts as a mouse's left button when using the Wireless
Mouse function.
From now on, referred to as the [Enter] button.
X
[LAN] button
Switches the image source between the network
connected devices.
Y
[USB] button
Switches the image source between the USB Display
and USB-A port.
Z
[Source Search]
button
Changes to the next input source.
a
Remote control light
emitting area
Outputs remote control signals.
K
L
]
[User] button
[Page] up/down
buttons
Performs settings assigned in the User Button setting
in the projector's Settings menu.
Controls page up and down on your computer when
you connect a projector and computer using a USB
cable or over a network.
Displays the previous or next screen while using the PC
Free feature.
M
[E-Zoom +/–]
buttons
Zooms in or zooms out the image area.
N
[A/V Mute] button
Turns the video and audio on or off temporarily.
O
[Split] button
Projects two images from different image sources
simultaneously by splitting the projected screen.
g Related Links
• "Image Aspect Ratio" p.51
• "Color Mode" p.53
• "Input Signal Settings - Signal Menu" p.103
• "Projector Setup Settings - Extended Menu" p.107
• "Projecting Two Images Simultaneously" p.57
• "Using the Remote Control as a Wireless Mouse" p.68
• "Using the Remote Control as a Pointer" p.70
ad
o
nl
ow
D
17
ed
Projector Parts and Functions
m
fro
re
or
nb
de
an
.v
w
w
w
• "Connecting to a Computer" p.21
• "Projecting a PC Free Presentation" p.60
• "Using the Projector on a Network" p.81
e
.b
ed
ad
o
nl
ow
D
m
fro
e
g Related Links
• "Projector Placement" p.19
• "Projector Connections" p.21
• "Installing Batteries in the Remote Control" p.29
• "Remote Control Operation" p.30
• "Opening the Lens Cover" p.31
.b
Follow the instructions in these sections to set up your projector.
re
or
nb
de
an
.v
w
w
w
Setting Up the Projector
o
nl
ow
D
ad
Projector Placement
ed
19
m
fro
re
or
nb
Warning
e
.b
• Place the projector on a sturdy, level surface or install it using a compatible
mount.
If you cannot install the projector parallel to the screen, correct
keystone distortion using the projector controls.
de
Note the following points when selecting a projector location:
a
an
.v
You can also install the projector in a ceiling mount if you want to use it in a
fixed location. An optional ceiling mount is required when suspending the
projector from a ceiling.
w
w
w
You can place the projector on almost any flat surface to project an image.
• You must install a ceiling mount when suspending the projector from a ceiling.
If you do not install the projector correctly, it could fall and cause damage or
injury.
• Do not use adhesives on the ceiling mount fixing points to prevent the screws
from loosening, or use lubricants, oils, or similar substances on the projector; the
projector case may crack causing it to fall from its ceiling mount. This could
cause serious injury to anyone under the ceiling mount and could damage the
projector.
• Do not cover the projector's air intake or air exhaust vents. If the vents are
covered, the internal temperature could rise and cause a fire.
Attention
• Leave plenty of space around and under the projector for ventilation, and
do not place it on top of or next to anything that could block the vents.
• Position the projector within reach of a grounded electrical outlet or
extension cord.
• Place the projector parallel to the screen.
• Do not operate the projector on its side. This may cause the projector to
malfunction.
• If you are using the projector at altitudes above 1500 m, set the High Altitude
Mode setting to On in the projector's Extended menu to ensure the projector's
internal temperature is regulated properly.
s Extended > Operation > High Altitude Mode
g Related Links
• "Projector Setup and Installation Options" p.19
• "Projection Distance" p.20
• "Image Shape" p.41
• "Projector Setup Settings - Extended Menu" p.107
• "Optional Accessories" p.148
Projector Setup and Installation Options
You can set up or install your projector in the following ways:
o
nl
ow
D
ad
Projector Placement
ed
20
m
fro
When correcting keystone distortion, your image is slightly smaller.
re
or
nb
de
a
an
.v
w
w
w
Front/Rear
e
.b
Front Ceiling/Rear Ceiling
g Related Links
• "Screen Size and Projection Distance" p.149
When projecting from the ceiling or from the rear, make sure you select the
correct Projection option in the projector's Extended menu.
g Related Links
• "Projection Modes" p.38
Projection Distance
The distance at which you place the projector from the screen determines the
approximate size of the image. The image size increases the farther the
projector is from the screen, but can vary depending on the zoom factor,
aspect ratio, and other settings.
See the Appendix for details about how far to place the projector from the
screen based on the size of the projected image.
o
nl
ow
D
ad
Projector Connections
ed
21
m
fro
To connect a Mac that includes only a Mini DisplayPort, Thunderbolt
port, or Mini-DVI port for video output, you need to obtain an adapter
that allows you to connect to the projector's VGA video port. Contact
Apple for compatible adapter options.
e
.b
a
re
or
nb
de
• Connect a computer that has a USB port, standard video output (monitor)
port, or HDMI port.
• For video projection, connect devices such as DVD players, gaming
consoles, digital cameras, and smartphones with compatible video output
ports.
• If your presentation or video includes sound, you can connect audio input
cables.
• For slide shows or presentations without a computer, you can connect USB
devices (such as a flash drive or camera) or the optional Epson document
camera.
You can play sound through the projector's speaker system by connecting a
commercially available RCA audio cable.
an
.v
Illustrations in this section are of EB-W04.
w
w
w
You can connect the projector to a variety of computer, video, and audio
sources to display presentations, movies, or other images, with or without
sound.
a Connect the VGA computer cable to your computer's monitor port.
b Connect the other end to a Computer port on the projector.
g Related Links
• "Connecting to a Computer" p.21
• "Connecting to Smartphones or Tablets" p.23
• "Connecting to Video Sources" p.24
• "Connecting to External USB Devices" p.27
• "Connecting to a Document Camera" p.28
Connecting to a Computer
Follow the instructions in these sections to connect a computer to the
projector.
g Related Links
• "Connecting to a Computer for VGA Video and Audio" p.21
• "Connecting to a Computer for USB Video and Audio" p.22
• "Connecting to a Computer for HDMI Video and Audio" p.23
Connecting to a Computer for VGA Video and Audio
You can connect the projector to your computer using a VGA computer
cable. The VGA computer cable may not be included with your projector.
c Tighten the screws on the VGA connector.
the audio cable to your laptop's headphone or audio-out jack,
d Connect
or your desktop's speaker or audio-out port.
o
nl
ow
D
ad
Projector Connections
ed
22
m
fro
w
w
w
c Turn on the projector.
d Do one of the following to install the Epson USB Display software:
re
or
nb
de
an
.v
e Connect the other end to the projector's Audio ports.
e
.b
a
You only need to install this software the first time you connect
the projector to the computer.
• Windows 2000: Double-click Computer > EPSON_PJ_UD >
EMP_UDSE.EXE.
Connecting to a Computer for USB Video and Audio
If your computer meets the system requirements, you can send video and
audio output to the projector through the computer's USB port. This function
is called USB Display. The USB cable may not be included with your
projector.
a
a
If you use a USB hub, the connection may not operate correctly.
Connect the USB cable directly to the projector.
Connect the cable to your projector's USB-B port.
• Windows XP: Wait as messages are displayed on your computer
screen and the projector installs the Epson USB Display software on
your computer. If it is not installed automatically, double-click My
Computer > EPSON_PJ_UD > EMP_UDSE.EXE.
• Windows Vista/Windows 7/Windows 8/Windows 8.1: Select Run
EMP_UDSE.EXE in the dialog box that is displayed to install the
Epson USB Display software.
• OS X: The Epson USB Display setup folder is displayed on your
screen. Select USB Display Installer and follow the on-screen
instructions to install the Epson USB Display software. If the USB
Display Setup folder is not displayed automatically, double-click
EPSON_PJ_UD > USB Display Installer.
any on-screen instructions.
e Follow
Do not disconnect the USB cable or turn off the projector until the
projector displays an image.
a
If you are using Windows 2000 or Windows XP and you see a
message asking if you want to restart your computer, select No.
The projector displays the image from your computer's desktop and outputs
sound if your presentation contains audio.
b Connect the other end to any available USB port on your computer.
o
nl
ow
D
ad
Projector Connections
ed
23
m
fro
w
w
w
a Connect the HDMI cable to your computer's HDMI output port.
e
To connect a Mac that includes only a Mini DisplayPort, Thunderbolt
port, or Mini-DVI port for video output, you need to obtain an adapter
that allows you to connect to the projector's HDMI port. Contact
Apple for compatible adapter options. Older Mac computers (2009 and
earlier) may not support audio through the HDMI port.
.b
a
re
or
If your computer has an HDMI port, you can connect it to the projector using
a commercially available HDMI cable and send the computer's audio with the
projected image.
nb
Connecting to a Computer for HDMI Video and Audio
de
g Related Links
• "USB Display System Requirements" p.159
b Connect the other end to the projector's HDMI port.
an
.v
a
• If the projector does not project any images, do one of the following:
• Windows: Click All Programs > EPSON Projector > Epson USB
Display > Epson USB Display Ver.x.xx.
• OS X: Double-click the USB Display icon in the Application
folder.
• When you finish projection, do one of the following:
• Windows: Disconnect the USB cable. You do not need to operate
Safely Remove Hardware.
• OS X: Select Disconnect from the USB Display icon menu on the
menu bar or Dock, and then disconnect the USB cable.
g Related Links
• "Projector Setup Settings - Extended Menu" p.107
Connecting to Smartphones or Tablets
You can connect the projector to smartphones and tablets using a
commercially available MHL cable and send the audio with the projected
image (EB-U32/EB-W32/EB-W31/EB-U04/EB-U130).
a
• You may not be able to connect an MHL cable to all devices.
• You may not be able to project correctly, depending on the model
and settings of the smartphone or tablet.
• To check if your smartphone or tablet device supports MHL, contact
the manufacturer of your smartphone or tablet device.
a Connect the MHL cable to your device's MHL port.
b Connect the other end to the projector's HDMI/MHL port.
o
nl
ow
D
ad
Projector Connections
ed
24
m
fro
If images are not projected correctly, disconnect and then reconnect
the MHL cable.
re
or
nb
de
a
an
.v
w
w
w
EB-W32/EB-W31
e
.b
Connecting to Video Sources
Follow the instructions in these sections to connect video devices to the
projector.
Attention
EB-U32/EB-U04/EB-U130
Check the shape and orientation of the connectors on any cable you plan to
connect. Do not force a connector into a port if it does not fit. The device or your
projector could be damaged or could malfunction.
a
If the port on the device you connect has an unusual shape, use the
cable supplied with the device or an optional cable to connect to the
projector.
g Related Links
• "Connecting to an HDMI Video Source" p.24
• "Connecting to a Component-to-VGA Video Source" p.25
• "Connecting to an S-Video Video Source" p.26
• "Connecting to a Composite Video Source" p.26
Attention
If you connect an MHL cable that does not support the MHL standard, the
smartphone or tablet device may become hot, or leakage or explosion may
happen.
The connected smartphone or tablet begins charging when images are
projected. If you connect using a commercially available MHL-HDMI
conversion adapter, charging the smartphone or tablet device may not
work or you may not be able to perform operations using the
projector's remote control.
Connecting to an HDMI Video Source
If your video source has an HDMI port, you can connect it to the projector
using a commercially available HDMI cable and send the image source's audio
with the projected image.
Attention
Do not turn on the video source before connecting it to the projector. Doing so
could damage the projector.
a Connect the HDMI cable to your video source's HDMI output port.
ad
o
nl
ow
D
25
ed
Projector Connections
m
fro
w
w
w
b Connect the VGA connector to a Computer port on the projector.
re
or
nb
de
an
.v
b Connect the other end to the projector's HDMI port.
e
.b
g Related Links
• "Projector Setup Settings - Extended Menu" p.107
Connecting to a Component-to-VGA Video Source
If your video source has component video ports, you can connect it to the
projector using an optional component-to-VGA video cable. Depending on
your component ports, you may need to use an adapter cable along with a
component video cable.
c Tighten the screws on the VGA connector.
d Connect the audio cable to your video source's audio-out ports.
e Connect the other end to the projector's Audio ports.
You can play sound through the projector's speaker system by connecting a
commercially available RCA audio cable.
a
Make sure the audio cable is labeled "No resistance".
the component connectors to your video source's color-coded
a Connect
component video output ports.
a
The ports usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using
an adapter, connect these connectors to your component video
cable.
If your image colors appear incorrectly, you may need to change the Input
Signal setting in the projector's Signal menu.
s Signal > Advanced > Input Signal
g Related Links
• "Input Signal Settings - Signal Menu" p.103
o
nl
ow
D
ad
Projector Connections
ed
26
m
fro
w
w
w
d Connect the other end to the projector's Audio ports.
nb
de
an
.v
Connecting to an S-Video Video Source
re
or
If your video source has an S-Video port, you can connect it to the projector
using a commercially available S-Video cable (EB-W32/EB-W31/EB-X36/EBX31/EB-S31/EB-W04/EB-X04/EB-S04/EB-W130/EB-X130/EB-S130/EBX350/EB-X300/EB-S300).
e
.b
You can play sound through the projector's speaker system by connecting a
commercially available RCA audio cable.
a
Make sure the audio cable is labeled "No resistance".
a Connect the S-Video cable to your video source's S-Video output port.
b Connect the other end to the projector's S-Video port.
Connecting to a Composite Video Source
If your video source has a composite video port, you can connect it to the
projector using a commercially available RCA-style video or A/V cable.
You can play sound through the projector's speaker system by connecting a
commercially available RCA audio cable.
a
c Connect the audio cable to your video source's audio-out ports.
Make sure the audio cable is labeled "No resistance".
the cable with the yellow connector to your video source's
a Connect
yellow video output port.
b Connect the other end to the projector's Video port.
o
nl
ow
D
ad
Projector Connections
ed
27
m
fro
• Digital cameras or smartphones must be USB-mounted devices, not
TWAIN-compliant devices, and must be USB Mass Storage Classcompliant.
• USB hard drives must meet these requirements:
• USB Mass Storage Class-compliant (not all USB Mass Storage
Class devices are supported)
• Formatted in FAT or FAT32
• Self-powered by their own AC power supplies (bus-powered hard
drives are not recommended)
• Avoid using hard drives with multiple partitions
re
or
nb
de
a
an
.v
w
w
w
e
.b
c Connect the audio cable to your video source's audio-out ports.
d Connect the other end to the projector's Audio ports.
You can project image files on a connected USB device using PC Free.
Connecting to External USB Devices
Follow the instructions in these sections to connect external USB devices to
the projector.
g Related Links
• "USB Device Projection" p.27
• "Connecting to a USB Device" p.27
• "Disconnecting a USB Device" p.28
USB Device Projection
You can project images and other content without using a computer or video
device by connecting any of these devices to your projector:
•
•
•
•
USB flash drive
Digital camera or smartphone
USB hard drive
Multimedia storage viewer
g Related Links
• "Projecting a PC Free Presentation" p.60
Connecting to a USB Device
You can connect your USB device to the projector's USB-A port and use it to
project images and other content.
your USB device came with a power adapter, plug the device into an
a Ifelectrical
outlet.
the USB cable (or USB flash drive or USB memory card
b Connect
reader) to the projector's USB-A port shown here.
ad
o
nl
ow
D
28
ed
Projector Connections
m
fro
Connecting to a Document Camera
You can connect a document camera to your projector to project images
viewed by the camera.
The connection method varies depending on your Epson document camera
model. See the document camera manual for details.
e
a Turn off and unplug the device, if necessary.
b Disconnect the USB device from the projector.
.b
When you have finished presenting with a connected USB device, disconnect
the device from the projector.
re
or
Disconnecting a USB Device
nb
c Connect the other end to your device, if necessary.
de
• Use the USB cable supplied with or specified for use with the device.
• Do not connect a USB hub or a USB cable longer than 3 meters, or the
device may not operate correctly.
an
.v
w
w
w
Attention
ad
o
nl
ow
D
29
ed
Installing Batteries in the Remote Control
m
fro
re
or
Check the positions of the (+) and (–) marks inside the battery holder to
ensure the batteries are inserted the correct way. If the batteries are not used
correctly, they could explode or leak causing a fire, injury, or damage to the
product.
e
.b
b Insert the batteries with the + and – ends facing as shown.
nb
a Open the battery cover as shown.
de
Make sure you read the Safety Instructions before handling the batteries.
Warning
an
.v
Attention
w
w
w
The remote control uses the two AA batteries that came with the projector.
c Close the battery cover and press it down until it clicks into place.
ad
o
nl
ow
D
30
ed
Remote Control Operation
m
fro
re
or
nb
e
.b
Avoid using the remote control in conditions with bright fluorescent
lights or in direct sunlight, or the projector may not respond to
commands. If you are not going to use the remote control for a long
time, remove the batteries.
de
a
an
.v
Make sure that you aim the remote control at the projector's receivers within
the distance and angles listed here.
w
w
w
The remote control lets you control the projector from almost anywhere in
the room.
ad
o
nl
ow
D
31
ed
Opening the Lens Cover
m
fro
re
or
nb
de
an
.v
w
w
w
open the projector's lens cover, slide the A/V Mute slide lever until
a Toit clicks.
e
.b
cover the lens or temporarily turn off the projected image and
b Tosound,
close the lens cover.
ed
ad
o
nl
ow
D
m
fro
e
g Related Links
• "Turning On the Projector" p.33
• "Turning Off the Projector" p.36
• "Selecting the Language for the Projector Menus" p.37
• "Projection Modes" p.38
• "Adjusting the Image Height" p.40
• "Image Shape" p.41
• "Resizing the Image with the Zoom Ring" p.46
• "Resizing the Image with the Buttons" p.47
• "Focusing the Image Using the Focus Ring" p.48
• "Selecting an Image Source" p.49
• "Image Aspect Ratio" p.51
• "Color Mode" p.53
• "Controlling the Volume with the Volume Buttons" p.55
.b
Follow the instructions in these sections to use your projector's basic features.
re
or
nb
de
an
.v
w
w
w
Using Basic Projector Features
ad
o
nl
ow
D
33
ed
Turning On the Projector
m
fro
c Open the projector's lens cover.
re
or
nb
de
an
.v
e
.b
the power cord to the projector's power inlet and plug it into
a Connect
an electrical outlet.
w
w
w
Turn on the computer or video equipment you want to use after you turn on
the projector.
Try the following if you do not see a projected image.
The projector's power indicator turns blue. This indicates that the
projector is receiving power, but is not yet turned on (it is in standby
mode).
the power button on the control panel or remote control to turn
b Press
on the projector.
The projector beeps and the status indicator flashes blue as the
projector warms up. Once the projector is warmed up, the status
indicator stops flashing and turns blue.
• Verify the lens cover is open all the way.
• Turn on the connected computer or video device.
• Change the screen output from the computer when using a laptop
computer.
• Insert a DVD or other video media, and press play (if necessary).
• Press the [Source Search] button on the control panel or remote control to
detect the source.
• Press the button for the desired video source on the remote control.
• If the Home screen is displayed, select the source you want to project.
o
nl
ow
D
ad
Turning On the Projector
ed
34
m
fro
w
w
w
e
.b
g Related Links
• "Home Screen" p.34
• "Projector Setup Settings - Extended Menu" p.107
re
or
• When the Direct Power On setting is set to On in the projector's
Extended menu, the projector turns on as soon as you plug it in.
Note that the projector also turns on automatically in cases such as
recovery from a power outage.
s Extended > Operation > Direct Power On
• If you select a specific port as the Auto Power On setting in the
projector's Extended menu, the projector turns on as soon as it
detects a signal or cable connection from that port. (Set Standby
Mode to Communication On in the projector's ECO menu first.)
s Extended > Operation > Auto Power On
Home Screen
nb
a
de
• Never look into the projector lens when the lamp is on. This can damage your
eyes and is especially dangerous for children.
• During projection, do not block the light from the projector with a book or other
objects. If the light from the projector is blocked, the area on which the light
shines becomes hot which could cause it to melt, burn, or start a fire. Also, the
lens may get hot due to the reflected light which could cause the projector to
malfunction. To stop projection, use the A/V Mute function, or turn off the
projector.
• A mercury lamp with high internal pressure is used as the projector's light
source. If the lamp is subjected to vibrations or shocks, or if it is used for an
overly extended length of time, the lamp may break or it may not turn on. If the
lamp explodes, gases may escape and small fragments of glass may be scattered
which could cause an injury. Be sure to observe the instructions below.
• Do not disassemble or damage the lamp or subject it to any impacts.
• Do not bring your face close to the projector while it is in use.
• Particular care should be taken when the projector is installed to a ceiling, as
small pieces of glass may fall down when the lamp cover is removed. When
cleaning the projector or replacing the lamp yourself, be very careful not to
allow such pieces of glass to get into the eyes or mouth.
If the lamp breaks, ventilate the area immediately, and contact a doctor if any
fragments of broken glass are inhaled or get into the eyes or mouth.
• "Projector Setup Settings - ECO Menu" p.115
an
.v
Warning
The Home screen feature allows you to easily select an image source and
access useful functions. You can display the Home screen by pressing the
[Home] button on the control panel or remote control. The Home screen is
also displayed when you turn on the projector and no signal is being input
from the selected input source.
Press the arrow buttons on the control panel or remote control to select a
menu item, and then press [Enter].
A
Select the source you want to project.
B
Displays the QR code and projects data on a smartphone or tablet device.
C
Displays the Help screen.
D
Displays the projector's menu.
E
Performs menu options assigned to Home Screen setting in the projector's
Extended menu.
ad
o
nl
ow
D
35
ed
Turning On the Projector
m
fro
re
or
Corrects the shape of an image that is an uneven rectangle.
nb
G
de
Projects two images from different image sources simultaneously by splitting
the projected screen.
an
.v
w
w
w
F
e
.b
a
The Home screen disappears after 10 minutes of inactivity.
g Related Links
• "Image Shape" p.41
• "Projector Setup Settings - Extended Menu" p.107
• "Using a QR Code to Connect a Mobile Device" p.87
• "Using the Projector's Menus" p.99
• "Using the Projector Help Displays" p.137
• "Connecting to a Computer" p.21
ad
o
nl
ow
D
36
ed
Turning Off the Projector
m
fro
w
w
w
or store the projector, make sure the power indicator is
c Tobluetransport
(but not flashing) and the status indicator is off, then unplug the
power cord.
re
or
e
.b
a
Turn off this product when it is not in use to prolong the life of the
projector. Lamp life varies depending on the mode selected,
environmental conditions, and usage. Brightness decreases over time.
nb
de
an
.v
Turn off the projector after use.
the power button on the control panel or remote control.
a Press
The projector displays a shutdown confirmation screen.
the power button again. (To leave it on, press any other button.)
b Press
The projector beeps twice, the lamp turns off, and the status indicator
turns off.
a
With Epson's Instant Off technology, there is no cool-down
period so you can pack up the projector for transport right away.
d Close the projector's lens cover.
ad
o
nl
ow
D
37
ed
Selecting the Language for the Projector Menus
m
fro
re
or
nb
e
.b
d Select the Language setting and press [Enter].
e Select the language you want to use and press [Enter].
de
c Select the Extended menu and press [Enter].
f Press [Menu] or [Esc] to exit the menus.
an
.v
a Turn on the projector.
b Press the [Menu] button on the control panel or remote control.
w
w
w
If you want to view the projector's menus and messages in another language,
you can change the Language setting.
ad
o
nl
ow
D
38
ed
Projection Modes
m
fro
an
.v
Changing the Projection Mode Using the Menus
nb
de
You can change the projection mode to flip the image over top-to-bottom
and/or left-to-right using the projector menus.
re
or
e
.b
• Front (default setting) lets you project from a table in front of the screen.
• Front/Ceiling flips the image over top-to-bottom to project upside-down
from a ceiling or wall mount.
• Rear flips the image horizontally to project from behind a translucent
screen.
• Rear/Ceiling flips the image over top-to-bottom and horizontally to project
from the ceiling and behind a translucent screen.
w
w
w
Depending on how you positioned the projector, you may need to change the
projection mode so your images project correctly.
a Turn on the projector and display an image.
b Press the [Menu] button on the control panel or remote control.
g Related Links
• "Changing the Projection Mode Using the Remote Control" p.38
• "Changing the Projection Mode Using the Menus" p.38
• "Projector Setup and Installation Options" p.19
Changing the Projection Mode Using the Remote
Control
You can change the projection mode to flip the image over top-to-bottom.
a Turn on the projector and display an image.
b Hold down the [A/V Mute] button on the remote control for 5 seconds.
The image disappears briefly and reappears flipped top-to-bottom.
projection back to the original mode, hold down the [A/V
c ToMute]change
button for 5 seconds again.
c Select the Extended menu and press [Enter].
ad
o
nl
ow
D
39
ed
Projection Modes
m
fro
re
or
nb
de
an
.v
w
w
w
d Select Projection setting and press [Enter].
e
.b
e Select a projection mode and press [Enter].
f Press [Menu] or [Esc] to exit the menus.
ad
o
nl
ow
D
40
ed
Adjusting the Image Height
m
fro
re
or
B Retract the rear foot
nb
e
.b
c Release the lever to lock the foot.
d If the image is tilted, rotate the rear feet to adjust their height.
A Extend the rear foot
de
The foot extends from the projector. You can adjust the position up to
12 degrees.
an
.v
a
the front foot, pull up on the foot release lever and lift the
b Tofrontadjust
of the projector.
Turn on the projector and display an image.
w
w
w
If you are projecting from a table or other flat surface and the image is too
high or low, you can adjust the image height using the projector's adjustable
feet. The larger the angle of tilt, the harder it becomes to focus. Locate the
projector so that it only needs to be tilted at a small angle.
If the projected image is unevenly rectangular, you need to adjust the image
shape.
g Related Links
• "Image Shape" p.41
o
nl
ow
D
ad
Image Shape
ed
41
m
fro
Correcting the Image Shape with the Horizontal
Keystone Slider
re
or
nb
de
.b
You can use the projector's horizontal keystone slider to correct the shape of
an image that is an uneven horizontal rectangle, such as when the projector is
placed to the side of the projection area.
e
Auto V-Keystone
an
.v
g Related Links
• "Auto V-Keystone" p.41
• "Correcting the Image Shape with the Horizontal Keystone Slider" p.41
• "Correcting the Image Shape with the Keystone Buttons" p.42
• "Correcting the Image Shape with Quick Corner" p.43
w
w
w
You can project an even, rectangular image by placing the projector directly
in front of the center of the screen and keeping it level. If you place the
projector at an angle to the screen, or tilt it up or down, or off to the side, you
may need to correct the image shape.
a Turn on the projector and display an image.
b Adjust the slider until the image is an even rectangle.
When the projector is moved or tilted, Auto V-Keystone automatically
corrects any vertical keystone distortion.
When the projector is moved, it displays an adjustment screen and then
automatically corrects the projected image.
Auto V-Keystone can correct the projected image distortion in these
conditions:
• Projection angle is about 30º up or down
• The Projection setting is set to Front in the projector's Extended menu
a
If you do not want to use the Auto V-Keystone function, set Auto VKeystone to Off in the projector's Settings menu.
s Settings > Keystone > H/V-Keystone > Auto V-Keystone
g Related Links
• "Projection Modes" p.38
• "Projector Feature Settings - Settings Menu" p.105
• "Projector Setup Settings - Extended Menu" p.107
After correction, your image is slightly smaller.
a
• When you use the horizontal keystone slider, set H-Keystone
Adjuster to On in the projector's Settings menu.
s Settings > Keystone > H/V-Keystone > H-Keystone
Adjuster
• You can also correct the shape of the image in the horizontal
direction by pressing the [Menu] button on the remote control
and selecting H/V-Keystone in the projector's Settings menu.
s Settings > Keystone > H/V-Keystone
o
nl
ow
D
ad
Image Shape
ed
42
m
fro
w
w
w
c Press a keystone button to adjust the image shape.
re
or
nb
de
an
.v
Correcting the Image Shape with the Keystone
Buttons
.b
e
You can use the projector's keystone correction buttons to correct the shape
of an image that is unevenly rectangular.
You can use keystone buttons to correct images up to 30º right, left, up, or
down.
a Turn on the projector and display an image.
one of the keystone adjustment buttons on the control panel to
b Press
display the Keystone adjustment screen.
After correction, your image is slightly smaller.
a
If the projector is installed out of your reach, you can also correct
the shape of the image by pressing the [Menu] button on the
remote control and selecting H/V-Keystone in the projector's
Settings menu.
s Settings > Keystone > H/V-Keystone
ad
o
nl
ow
D
43
ed
Image Shape
m
fro
c Select the Settings menu and press [Enter].
re
or
nb
de
an
.v
e
.b
Correcting the Image Shape with Quick Corner
w
w
w
g Related Links
• "Projector Feature Settings - Settings Menu" p.105
You can use the projector's Quick Corner setting to correct the shape and size
of an image that is unevenly rectangular.
a Turn on the projector and display an image.
b Press the [Menu] button on the control panel or remote control.
d Select Keystone and press [Enter].
o
nl
ow
D
ad
Image Shape
ed
44
m
fro
• If you see this screen, you cannot adjust the shape any further
in the direction indicated by the gray triangle.
re
or
nb
de
a
an
.v
w
w
w
e Select Quick Corner and press [Enter]. Press [Enter] again if necessary.
e
.b
You see the Quick Corner adjustment screen.
the arrow buttons to select the corner of the image you want to
f Use
adjust. Then press [Enter].
• To reset the Quick Corner corrections, hold down [Esc] for
about 2 seconds while the Quick Corner adjustment screen is
displayed, and select Reset Quick Corner. Select Switch to
H/V-Keystone to switch the image shape correction method to
H/V-Keystone.
the arrow buttons to adjust the image shape as necessary.
g Press
When you press [Enter], the Quick Corner adjustment screen is
displayed.
h Repeat steps 6 and 7 as needed to adjust any remaining corners.
i When you are finished, press [Esc].
The Keystone setting is now set to Quick Corner in the projector's Settings
menu. The next time you press the keystone adjustment buttons on the
control panel, the Quick Corner adjustment screen is displayed.
ad
o
nl
ow
D
45
ed
Image Shape
m
fro
re
or
nb
de
an
.v
w
w
w
g Related Links
• "Projector Feature Settings - Settings Menu" p.105
e
.b
ad
o
nl
ow
D
46
ed
Resizing the Image with the Zoom Ring
m
fro
re
or
nb
de
an
.v
e
.b
a Turn on the projector and display an image.
b Rotate the zoom ring to enlarge or reduce the image.
w
w
w
You can resize the image using the projector's zoom ring (EB-U32/EBW32/EB-W31/EB-X36/EB-X31/EB-U04/EB-W04/EB-X04/EB-U130/EBW130/EB-X130/EB-X350/EB-X300).
ad
o
nl
ow
D
47
ed
Resizing the Image with the Buttons
m
fro
re
or
nb
de
an
.v
e
.b
a Turn on the projector and display an image.
the Wide button on the projector's control panel to enlarge the
b Press
image size. Press the Tele button to reduce the image size.
w
w
w
You can resize the image using the Wide and Tele buttons (EB-S31/EBS04/EB-S130/EB-S300).
ad
o
nl
ow
D
48
ed
Focusing the Image Using the Focus Ring
m
fro
re
or
nb
de
an
.v
e
.b
EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EB-U04/EB-W04/EB-X04/EBU130/EB-W130/EB-X130/EB-X350/EB-X300
w
w
w
You can correct the focus using the focus ring.
EB-S31/EB-S04/EB-S130/EB-S300
ad
o
nl
ow
D
49
ed
Selecting an Image Source
m
fro
This screen is displayed when no image signal is detected.
Check the cable connections between the projector and image
source.
re
or
nb
de
a
an
.v
w
w
w
When multiple image sources are connected to the projector, such as a
computer and DVD player, you can switch from one image source to the
other.
.b
e
a Make sure the connected image source you want to use is turned on.
video image sources, insert a DVD or other video media and press
b For
play.
one of the following:
c Do
• Press the [Source Search] button on the control panel or remote
control until you see the image from the source you want.
• Press the button for the source you want on the remote control. If
there is more than one port for that source, press the button again to
cycle through the sources.
A Computer port source (Computer port)
B Video, S-Video, HDMI, and MHL sources (Video, S-Video, HDMI,
and HDMI/MHL ports)
C USB port sources (USB-B port and external devices connected to the
USB-A port)
D Network source (LAN)
ad
o
nl
ow
D
50
ed
Selecting an Image Source
m
fro
re
or
nb
de
an
.v
w
w
w
• Press the [Home] button on the control panel or remote control.
e
.b
Then select the source you want to use from the screen displayed.
a
S-Video is available with the EB-W32/EB-W31/EB-X36/EBX31/EB-S31/EB-W04/EB-X04/EB-S04/EB-W130/EB-X130/EBS130/EB-X350/EB-X300/EB-S300.
o
nl
ow
D
ad
Image Aspect Ratio
ed
51
m
fro
e
c
To cycle through the available aspect ratios for your input signal, press
the [Aspect] button repeatedly.
.b
a Turn on the projector and switch to the image source you want to use.
b Press the [Aspect] button on the remote control.
re
or
You can change the aspect ratio of the displayed image.
nb
Changing the Image Aspect Ratio
To display images without black bars, set Resolution to Wide or
Normal in the projector’s Signal menu according to the computer’s
resolution.
de
g Related Links
• "Changing the Image Aspect Ratio" p.51
• "Available Image Aspect Ratios" p.51
• "Projected Image Appearance with Each Aspect Mode" p.52
• "Input Signal Settings - Signal Menu" p.103
a
an
.v
If you always want to use a particular aspect ratio for a certain video input
source, you can select it using the projector's Signal menu.
w
w
w
The projector can display images in different width-to-height ratios called
aspect ratios. Normally, the input signal from your video source determines
the image's aspect ratio. However, for certain images you can change the
aspect ratio to fit your screen by pressing a button on the remote control.
g Related Links
• "Input Signal Settings - Signal Menu" p.103
Available Image Aspect Ratios
You can select the following image aspect ratios, depending on the input
signal from your image source.
a
• Black bands and cropped images may project in certain aspect ratios,
depending on the aspect ratio and resolution of your input signal.
• The Auto aspect ratio setting is available only for HDMI/MHL image
sources.
For projectors with a resolution of WUXGA (1920 × 1200) or WXGA
(1280 × 800)
Aspect mode
Description
Auto
Automatically sets the aspect ratio according to the
input signal and the Resolution setting.
Normal
Displays images using the full projection area and
maintains the aspect ratio of the image.
16:9
Converts the aspect ratio of the image to 16:9.
Full
Displays images using the full size of the projection
area, but does not maintain the aspect ratio.
Zoom
Displays images using the full width of the projection
area and maintains the aspect ratio of the image.
Native
Displays images as is (aspect ratio and resolution are
maintained).
o
nl
ow
D
ad
Image Aspect Ratio
ed
52
m
fro
Converts the aspect ratio of the image to 16:9.
Projected Image Appearance with Each Aspect Mode
Black bands and cropped images may project in certain aspect ratios,
depending on the aspect ratio and resolution of your input signal. See the
following table to confirm the position of black bands and cropped images.
The image for Native varies depending on the input signal.
For projectors with a resolution of WUXGA (1920 × 1200) or WXGA
(1280 × 800)
Aspect ratio for input signals
16:9
Full
Zoom
16:9
4:3
4:3
e
16:9
16:9
.b
Converts the aspect ratio of the image to 4:3.
re
or
4:3
Native
nb
Automatically sets the aspect ratio according to the
input signal and the Resolution setting.
Normal
Auto
Aspect ratio for input signals
de
Auto
16:10
an
.v
Description
Aspect mode
Aspect mode
16:10
Aspect mode
a
w
w
w
For projectors with a resolution of XGA (1024 × 768) or SVGA (800 × 600)
For projectors with a resolution of XGA (1024 × 768) or SVGA (800 × 600)
Aspect mode
Aspect ratio for input signals
16:10
Auto
4:3
16:9
16:9
4:3
o
nl
ow
D
ad
Color Mode
ed
53
m
fro
You can also set the Color Mode setting in the projector's Image
menu.
re
or
nb
de
e
.b
Changing the Color Mode
a
an
.v
g Related Links
• "Changing the Color Mode" p.53
• "Available Color Modes" p.53
• "Setting Auto Iris" p.53
w
w
w
The projector offers different Color Modes to provide optimum brightness,
contrast, and color for a variety of viewing environments and image types.
You can select the mode designed to match your image and environment, or
experiment with the available modes.
g Related Links
• "Image Quality Settings - Image Menu" p.101
Available Color Modes
You can set the projector to use these Color Modes, depending on the input
source you are using:
You can change the projector's Color Mode using the remote control to
optimize the image for your viewing environment.
Color Mode
Description
a Turn on the projector and switch to the image source you want to use.
the [Color Mode] button on the remote control to change the
b Press
Color Mode.
Presentation
Best for color presentations and television images in a
bright room, with vivid images in sharp contrast.
Dynamic
Best for projecting in a bright room. This is the
brightest mode.
Cinema
Best for movies projected in a dark room with natural
tone images.
sRGB
Best for still images projected in a bright room that
conform to the sRGB color standard.
Blackboard
Best for presentations onto a green chalkboard
(adjusts the colors accordingly).
Setting Auto Iris
The name of the Color Mode appears briefly on the screen and then
image appearance changes.
all of the available Color Modes for your input signal,
c Topresscyclethethrough
[Color Mode] button repeatedly.
In Dynamic or Cinema color modes, you can turn on Auto Iris to
automatically optimize the image based on the brightness of the content.
a Turn on the projector and switch to the image source you want to use.
ad
o
nl
ow
D
54
ed
Color Mode
m
fro
w
w
w
d Select Auto Iris and press [Enter].
re
or
nb
de
an
.v
b Press the [Menu] button on the control panel or remote control.
e
.b
c Select the Image menu and press [Enter].
one of the following options and press [Enter]:
e Choose
• High Speed to adjust brightness as soon as the scene changes.
• Normal for standard brightness adjustment.
f Press [Menu] or [Esc] to exit the menus.
ad
o
nl
ow
D
55
ed
Controlling the Volume with the Volume Buttons
m
fro
Caution
Do not start a presentation at a high volume setting. Sudden loud noises may cause
hearing loss.
Always lower the volume before powering off, so that you can power on and then
gradually increase the volume.
g Related Links
• "Projector Feature Settings - Settings Menu" p.105
e
the volume to a specific level for an input source, select Volume
c Toin theset projector's
Settings menu.
.b
A volume gauge appears on the screen.
re
or
The [Volume] buttons on the control panel are available only
with EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EB-U04/EBW04/EB-X04/EB-U130/EB-W130/EB-X130/EB-X350/EB-X300.
nb
a
de
a Turn on the projector and start a presentation.
lower or raise the volume, press the [Volume] buttons on the
b Tocontrol
panel or remote control as shown.
an
.v
You must adjust the volume separately for each connected input source.
w
w
w
The volume buttons control the projector's internal speaker system.
ed
ad
o
nl
ow
D
m
fro
e
g Related Links
• "Projecting Two Images Simultaneously" p.57
• "Projecting a PC Free Presentation" p.60
• "Shutting Off the Image and Sound Temporarily" p.65
• "Stopping Video Action Temporarily" p.66
• "Zooming Images" p.67
• "Using the Remote Control as a Wireless Mouse" p.68
• "Using the Remote Control as a Pointer" p.70
• "Saving a User's Logo Image" p.71
• "Color Difference Correction when Projecting from Multiple Projectors" p.73
• "Projector Security Features" p.76
.b
Follow the instructions in these sections to use your projector's adjustment features.
re
or
nb
de
an
.v
w
w
w
Adjusting Projector Features
o
nl
ow
D
ad
Projecting Two Images Simultaneously
ed
57
m
fro
w
w
w
a Press [Split] button on the remote control.
re
or
nb
de
an
.v
You can use the split screen feature to simultaneously project two images
from different image sources. You can control the split screen feature using
the remote control or the projector menus.
e
.b
The currently selected input source moves to the left of the screen.
a
You can perform the same operations from Split Screen in the
projector's Settings menu.
the [Menu] button.
b Press
You see this screen:
a
While using the split screen feature, other projector features may not
be available and some settings may be automatically applied to both
images.
o
nl
ow
D
ad
Projecting Two Images Simultaneously
ed
58
m
fro
w
w
w
one image while reducing the other image, select Screen
e ToSize,enlarge
press [Enter], select a size, press [Enter], and press [Menu] to exit.
re
or
nb
de
an
.v
an input source for the other image, select the Source setting,
c Topressselect
[Enter], select the input source, select Execute, and press [Enter].
e
.b
a
Depending on the video input signals, the images may not
appear at the same size even if you select Equal.
select the audio, select Audio Source, press [Enter], select an audio
f Tooption,
press [Enter], and press [Menu] to exit.
a
• You can only select input sources that can be combined.
• While using the split screen feature, the source screen appears
when you change the input source from the remote control.
images, select Swap Screens and press [Enter].
d ToTheswitch
projected images on the left and right are swapped.
a
Select Auto to hear audio from the largest screen or the left
screen.
g To exit the split screen feature, press [Split] or [Esc].
g Related Links
• "Unsupported Input Source Combinations for Split Screen Projection" p.58
• "Split Screen Projection Restrictions" p.59
Unsupported Input Source Combinations for Split
Screen Projection
These input source combinations cannot be projected on a split screen.
• Computer, Video and S-Video
• USB Display, USB and LAN
ad
o
nl
ow
D
59
ed
Projecting Two Images Simultaneously
m
fro
•
•
•
•
•
Setting the projector's menu
E-Zoom
Switching the aspect mode (the aspect mode is set to Normal)
Operations using the [User] button on the remote control
Auto Iris
a
Help can only be displayed when no image signals are being input or
when an error or warning notification is displayed.
Image restrictions
• If you make adjustments such as Brightness, Contrast, Color Saturation,
Tint, and Sharpness in the projector's Image menu, you can apply them
only to the image on the left. Default adjustments are applied to the image
on the right. Adjustments that affect the entire projected image such as
Color Mode and Color Temp. are applied for both left and right images.
• Even if you make adjustments for Noise Reduction and Deinterlacing in
the projector's Image menu, Noise Reduction is set to 0 and Deinterlacing
is set to Off for the image on the right.
• Even if you set Display Background to Logo in the projector's Extended
menu, the blue screen appears when no image signal is being input.
g Related Links
• "Image Aspect Ratio" p.51
• "Color Mode" p.53
• "Input Signal Settings - Signal Menu" p.103
• "Projector Feature Settings - Settings Menu" p.105
• "Projector Setup Settings - Extended Menu" p.107
• "Zooming Images" p.67
• "Setting Auto Iris" p.53
e
The following operations cannot be performed during split screen projection.
.b
Operating restrictions
re
or
nb
de
an
.v
w
w
w
Split Screen Projection Restrictions
o
nl
ow
D
ad
Projecting a PC Free Presentation
ed
60
m
fro
Make sure the file is not:
• CMYK format
• Progressive format
• Highly compressed
• Above 8192 × 8192 resolution
.bmp
Make sure the file resolution is not above 1280 × 800
.gif
Make sure the file is not:
• Above 1280 × 800 resolution
• Animated
.png
Make sure the file resolution is not above 1280 × 800
.avi
(Motion
JPEG)
Make sure the file is not:
• Saved with an audio codec other than PCM or
ADPCM
• Above 1280 × 720 resolution
• Larger than 2 GB
e
.b
• For best results, place your files on media that is formatted in
FAT16/32.
• If you have trouble projecting from media formatted for nonWindows file systems, try formatting the media for Windows
instead.
.jpg
re
or
a
Image
nb
You can project these types of files using the projector's PC Free feature.
File contents File type
Details
(extension)
de
Supported PC Free File Types
an
.v
g Related Links
• "Supported PC Free File Types" p.60
• "Precautions on PC Free Projection" p.60
• "Starting a PC Free Slide Show" p.61
• "Starting a PC Free Movie Presentation" p.62
• "PC Free Display Options" p.63
w
w
w
You can use your projector's PC Free feature whenever you connect a USB
device that contains compatible presentation files. This lets you quickly and
easily display a presentation and control it using the projector's remote
control.
Movie
Precautions on PC Free Projection
Note the following precautions when using PC Free features.
• Do not disconnect the USB storage device while it is being accessed;
otherwise, PC Free may not operate correctly.
• You may not be able to use the security features on certain USB storage
devices with PC Free features.
• When connecting a USB device that includes an AC adapter, connect the
AC adapter to an electrical outlet when you use the device with your
projector.
• Some commercially available USB card readers may not be compatible with
the projector.
• The projector can recognize up to 5 cards inserted into the connected card
reader at one time.
o
nl
ow
D
ad
Projecting a PC Free Presentation
ed
61
m
fro
The PC Free file list screen is displayed.
re
or
nb
de
an
.v
.b
Freeze
A/V Mute
E-Zoom
Pointer
e
•
•
•
•
w
w
w
• You cannot correct keystone distortion while projecting in PC Free, so
correct the image shape before you begin your presentation.
• You can use the following functions while projecting in PC Free.
g Related Links
• "Stopping Video Action Temporarily" p.66
• "Shutting Off the Image and Sound Temporarily" p.65
• "Zooming Images" p.67
• "Using the Remote Control as a Pointer" p.70
Starting a PC Free Slide Show
After connecting a USB device to the projector, you can switch to the USB
input source and start your slide show.
a
a
You can change the PC Free operation options or add special effects by
highlighting Option at the bottom of the screen and pressing [Enter].
Press the [USB] button on the remote control.
a
• If the Select Drive screen is displayed, press the arrow buttons
to select the drive and press [Enter].
• To display the Select Drive screen, highlight Select Drive at the
top of the file list screen and press [Enter].
one of the following to locate your files:
b Do
• If you need to display files inside a subfolder on your device, press
the arrow buttons to highlight the folder and press [Enter].
• To move back up a folder level on your device, highlight Back to
Top and press [Enter].
• To view additional files in a folder, highlight Next Page or Previous
Page and press [Enter], or press the [Page] up or down buttons on
the remote control.
one of the following:
c Do
• To display an individual image, press the arrow buttons to highlight
the image and press [Enter]. (Press the [Esc] button to return to the
file list screen.)
o
nl
ow
D
ad
Projecting a PC Free Presentation
ed
62
m
fro
re
or
nb
de
e
g Related Links
• "PC Free Display Options" p.63
• "Connecting to a USB Device" p.27
.b
d • To rotate a displayed image, press the up or down arrow button.
While projecting, use the following commands to control the display:
off the USB device, if necessary, and then disconnect the device
f Turn
from the projector.
an
.v
a
• You can change the image switching time by highlighting
Option at the bottom of the screen and pressing [Enter].
• If any file names are longer than the display area or include
unsupported symbols, the file names may be shortened or
changed only on the screen display.
w
w
w
• To display a slide show of all the images in a folder, press the arrow
buttons to highlight the Slideshow option at the bottom of the screen
and press [Enter].
Starting a PC Free Movie Presentation
After connecting a USB device to the projector, you can switch to the USB
input source and start your movie.
a
You can change the PC Free operation options by highlighting Option
at the bottom of the screen and pressing [Enter].
the [USB] button on the remote control.
a Press
The PC Free file list screen is displayed.
• To move to the next or previous image, press the left or right arrow
button.
stop the display, follow the on-screen instructions or press the [Esc]
e Tobutton.
You return to the file list screen.
o
nl
ow
D
ad
Projecting a PC Free Presentation
ed
63
m
fro
an
.v
w
w
w
PC Free Display Options
nb
de
a
You can select these display options when using PC Free. To access this
screen, highlight Option at the bottom of the PC Free file list screen and press
[Enter].
re
or
e
.b
• If the Select Drive screen is displayed, press the arrow buttons
to select the drive and press [Enter].
• To display the Select Drive screen, highlight Select Drive at the
top of the file list screen and press [Enter].
one of the following to locate your files:
b Do
• If you need to display files inside a subfolder on your device, press
the arrow buttons to highlight the folder and press [Enter].
• To move back up a folder level on your device, highlight Back to
Top and press [Enter].
• To view additional files in a folder, highlight Next Page or Previous
Page, and press [Enter], or press the [Page] up or down buttons on
the remote control.
back a movie, press the arrow buttons to highlight the file and
c Topressplay[Enter].
a
d
• If any file names are longer than the display area or include
unsupported symbols, the file names may be shortened or
changed only on the screen display.
• If you want to play back all the movies in a folder in sequence,
select the Slideshow option at the bottom of the screen.
To stop movie playback, press the [Esc] button, highlight Exit, and
press [Enter].
You return to the file list screen.
off the USB device, if necessary, and then disconnect the device
e Turn
from the projector.
g Related Links
• "PC Free Display Options" p.63
• "Connecting to a USB Device" p.27
Setting
Options
Description
Display Order
Name Order
Displays files in name order
Date Order
Displays files in date order
In Ascending
Sorts files in first-to-last order
In Descending
Sorts files in last-to-first order
On
Displays a slide show continuously
Off
Displays a slide show once
No
Does not display the next file
automatically
1 Second to 60 Seconds
Displays files for the selected time
and switches to the next file
automatically; high resolution images
may switch at a slightly slower rate
Sort Order
Continuous Play
Screen Switching
Time
ad
o
nl
ow
D
64
ed
Projecting a PC Free Presentation
m
fro
Wipe
Transitions between images using a
wipe effect
Dissolve
Transitions between images using a
dissolve effect
Random
Transitions between images using a
random variety of effects
e
No effect
.b
No
re
or
Effect
nb
Description
de
Options
an
.v
w
w
w
Setting
o
nl
ow
D
ad
Shutting Off the Image and Sound Temporarily
ed
65
m
fro
re
or
e
.b
b To turn the image and sound back on, press [A/V Mute] again.
nb
the [A/V Mute] button on the remote control to temporarily stop
a Press
projection and mute any sound.
• You can also stop projection using the A/V Mute slide lever on the
projector.
• The projector's power automatically turns off 30 minutes after A/V
Mute is enabled. You can disable this feature in the projector's ECO
menu.
s ECO > Lens Cover Timer
s ECO > A/V Mute Timer
• The lamp is still operating during A/V Mute, so the lamp hours
continue to accumulate.
de
If you want to display an image such as a company logo or picture
when the [A/V Mute] button is pressed, you can select the screen
displayed in the A/V Mute setting in the projector's Extended menu.
s Extended > Display > A/V Mute
a
an
.v
a
w
w
w
You can temporarily turn off the projected image and sound if you want to
redirect your audience's attention during a presentation. Any sound or video
action continues to run, however, so you cannot resume projection at the
point that you stopped it.
g Related Links
• "Projector Setup Settings - Extended Menu" p.107
• "Projector Setup Settings - ECO Menu" p.115
ad
o
nl
ow
D
66
ed
Stopping Video Action Temporarily
m
fro
re
or
nb
de
e
.b
b To restart the video action in progress, press [Freeze] again.
an
.v
the [Freeze] button on the remote control to stop the video
a Press
action.
w
w
w
You can temporarily stop the action in a video or computer presentation and
keep the current image on the screen. Any sound or video action continues to
run, however, so you cannot resume projection at the point that you stopped
it.
ad
o
nl
ow
D
67
ed
Zooming Images
m
fro
w
w
w
The enlarged image is projected and the enlargement ratio is displayed
on the screen.
re
or
nb
de
an
.v
You can draw attention to parts of a presentation by zooming into a portion
of the image and enlarging it on the screen.
e
.b
a Press the [E-Zoom +] button on the remote control.
You see a crosshair on the screen indicating the center of the zoom
area.
the following buttons on the remote control to adjust the zoomed
b Use
image:
• Use the arrow buttons to position the crosshair in the image area you
want to zoom into. To move the crosshair diagonally, press any pair
of adjacent arrow buttons at the same time.
• Press the [E-Zoom +] button repeatedly to zoom into the image area.
Press and hold the [E-Zoom +] button to zoom in more quickly. The
selected area can be enlarged to between one to four times in 25
incremental steps.
• To pan around the zoomed image area, use the arrow buttons.
• To zoom out of the image, press the [E-Zoom –] button.
• To return to the original image size, press [Esc].
o
nl
ow
D
ad
Using the Remote Control as a Wireless Mouse
ed
68
m
fro
the following buttons on the remote control to control your
d Use
presentation:
re
or
nb
de
an
.v
You can use the wireless mouse features with Windows 2000 and later,
or OS X 10.3.x and later.
e
.b
a
w
w
w
You can use the projector's remote control as a wireless mouse so you can
control projection at a distance from the computer.
the projector to a computer using the projector's USB-B,
a Connect
Computer, or HDMI port.
a
The wireless mouse function does not work when projecting
images from a device connected to the HDMI/MHL port using
an MHL cable.
connected your computer to the port other than the USB-B port,
b Ifalsoyouconnect
a USB cable to the projector's USB-B port and to a USB
port on your computer (for wireless mouse support).
c Start your presentation.
• To move through slides or pages, press the [Page] up or down
buttons.
• To move the cursor on the screen, use the arrow buttons. To move
the cursor diagonally, press any pair of adjacent arrow buttons at the
same time.
• To left-click, press the [Enter] button once (press it twice to doubleclick). To right-click, press the [Esc] button.
• To drag-and-drop, hold the [Enter] button as you move the cursor
with the arrow buttons, then release [Enter] at the destination.
a
• If the mouse button settings are set to reverse on the computer, the
operation of the remote control buttons is also reversed.
• The Wireless Mouse function does not work under the following
conditions:
• When the projector's menu or a Help screen is displayed.
• When operating functions other than the Wireless Mouse function
(such as adjusting the volume).
However, when using the E-Zoom or Pointer function, the page up
or down function is available.
ad
o
nl
ow
D
69
ed
Using the Remote Control as a Wireless Mouse
m
fro
re
or
nb
de
an
.v
w
w
w
g Related Links
• "Zooming Images" p.67
• "Using the Remote Control as a Pointer" p.70
e
.b
ad
o
nl
ow
D
70
ed
Using the Remote Control as a Pointer
m
fro
re
or
e
.b
c Press [Esc] to remove the pointer from the screen.
nb
time.
de
the arrow buttons to move the pointer on the screen. To move the
b Use
pointer diagonally, press any pair of adjacent arrow buttons at the same
g Related Links
• "Projector Feature Settings - Settings Menu" p.105
an
.v
a Press the [Pointer] button on the remote control.
w
w
w
You can use the projector's remote control as a pointer to help you focus your
audience on important information on the screen. The default pointer shape
is an arrow. You can change the shape in the Pointer Shape setting in the
projector's Settings menu.
o
nl
ow
D
ad
Saving a User's Logo Image
ed
71
m
fro
w
w
w
d Select User's Logo and press [Enter].
re
or
nb
de
an
.v
e
.b
You can save an image on the projector and display it whenever the projector
turns on. You can also display the image when the projector is not receiving
an input signal or when you temporarily stop projection (using A/V Mute).
This image is called the user's logo screen.
You can select a photo, graphic, or company logo as the user's logo, which is
useful in identifying the projector's owner to help deter theft. You can prevent
changes to the user's logo by setting up password protection.
a
• Once you save a user's logo, you cannot return to the factory default
logo.
• If the User's Logo Protection setting is set to On in the Password
Protection menu, set to Off before saving the user's logo.
• When you copy the menu settings from one projector to another
using the batch setup feature, user's logo is also copied. Do not
register the information that you do not want to share between
multiple projectors as a user's logo.
a Display the image you want to project as the user's logo.
b Press the [Menu] button on the control panel or remote control.
c Select the Extended menu and press [Enter].
You see a prompt asking if you want to use the displayed image as a
user's logo.
a
Adjustments such as Keystone, E-Zoom, or Aspect are
temporarily cancelled when you select User's Logo.
Yes and press [Enter].
e Select
You see a selection box overlaying your image.
a
Depending on the current image signal, the screen size may
change to match the resolution of the image signal.
ad
o
nl
ow
D
72
ed
Saving a User's Logo Image
m
fro
w
w
w
Yes and press [Enter].
i Select
The user's logo is overwritten and a completion message appears.
re
or
nb
de
an
.v
the arrow buttons to surround the image area you want to use as
f Use
the user's logo and press [Enter].
e
.b
j Press [Esc] to exit the message screen.
k Select the Extended menu and press [Enter].
l Select Display and press [Enter].
when you want to display the User's Logo screen:
m Select
• To display it whenever there is no input signal, select Display
You see a prompt asking if you want to select this image area.
a
You cannot change the image area size (400 × 300 pixels).
Yes and press [Enter]. (If you want to change the selected area,
g Select
select No, press [Enter], and repeat the last step.)
You see the User's Logo zoom factor menu.
h Select a zoom percentage and press [Enter].
You see a prompt asking if you want to save the image as the user's
logo.
Background and set it to Logo.
• To display it whenever you turn the projector on, select Startup
Screen and set it to On.
• To display it whenever you press the [A/V Mute] button, select A/V
Mute and set it to Logo.
To prevent anyone from changing the User's Logo settings without first
entering a password, set the User's Logo Protection setting to On in the
Password Protection menu and set the password.
g Related Links
• "Shutting Off the Image and Sound Temporarily" p.65
• "Selecting Password Security Types" p.77
o
nl
ow
D
ad
Color Difference Correction when Projecting from Multiple Projectors
ed
73
m
fro
re
or
nb
de
e
.b
a
the arrow buttons to select the identification number you want to
d Use
use for the projector. Then press [Enter].
an
.v
You can set a unique projector ID for each projector to operate them
individually using a remote control, and then correct the brightness and color
for each projector.
w
w
w
When lining up multiple projectors to project images, you can correct the
brightness and color tone of each projector's image so that the images match
closely.
• In some cases the brightness and color tone may not match
completely even after correction.
• If brightness and color tone differences become more noticeable over
time, repeat the adjustments.
g Related Links
• "Setting the Projector ID" p.73
• "Selecting the Projector You want to Operate" p.73
• "Matching Multiple-Projector Display Quality" p.75
Setting the Projector ID
If you want to control multiple projectors from a remote control, give each
projector a unique ID.
a
b Select the Extended menu and press [Enter].
c Select Projector ID and press [Enter].
Press the [Menu] button on the control panel or remote control.
e Press [Menu] or [Esc] to exit the menus.
Repeat these steps for all the other projectors you want to operate from one
remote control.
Selecting the Projector You want to Operate
After setting the projector's ID, select the ID for the projector you want to
operate using the remote control.
o
nl
ow
D
ad
Color Difference Correction when Projecting from Multiple Projectors
ed
74
m
fro
w
w
w
holding the [ID] button, press the number button that matches
b While
the ID of the projector you want to operate.
re
or
nb
de
an
.v
the remote control at the target projector and press the [ID]
a Aim
button.
e
.b
The current Projector ID is displayed on the projected screen. It
disappears after about 3 seconds.
The projector you want to operate is selected.
the [ID] button to check if the ID-setting process worked.
c Press
You see a message displayed by the projector.
• If the remote control is listed as On, you can operate the projector
from the remote control.
• If the remote control is listed as Off, you cannot operate the projector
from the remote control. Repeat the steps above to enable the remote
control.
a
• You must select the projector ID from the remote control each
time you turn on the projector you have set it to control. When
you turn on the projector, 0 is selected as the remote control's
projector ID.
• When you set the Projector ID setting to Off, you can operate
the projector using the remote control whichever ID you select
on the remote control.
• When you select 0 on the remote control, you can operate all
projectors regardless the Projector ID setting.
o
nl
ow
D
ad
Color Difference Correction when Projecting from Multiple Projectors
ed
75
m
fro
re
or
e
.b
f Select settings as necessary.
the remote control ID to match the next projector, then repeat
g Select
Image menu adjustments as necessary to match the projectors' displays.
nb
on all the projectors on which you want to match the display
a Turn
quality.
b Set ID numbers on each projector.
c Make sure all the projectors are using the same Color Mode setting.
d Select the remote control ID to match the first projector.
e Press the [Menu] button, select the Image menu, and press [Enter].
de
You can match the display quality of multiple projectors that will project next
to each other.
an
.v
w
w
w
Matching Multiple-Projector Display Quality
o
nl
ow
D
ad
Projector Security Features
ed
76
m
fro
nb
de
Setting a Password
an
.v
To use password security, you must set a password.
re
or
e
.b
• Password security to prevent people who do not know the password from
using the projector, and prevent changes to the startup screen and other
settings. This acts as an anti-theft function as the projector cannot be used
even if it is stolen, and you can limit who can use the projector.
• Button lock security to block operation of the projector using the buttons
on the control panel. This is useful at events or shows when you want to
deactivate all buttons during projection or at schools when you want to
limit button operation.
• Security cabling to physically secure the projector in place.
w
w
w
You can secure your projector to deter theft or prevent unintended use by
setting up the following security features:
a
The default password is set to "0000". Change this to your own
password.
down the [Freeze] button on the remote control for about 5
a Hold
seconds.
g Related Links
• "Password Security Types" p.76
• "Locking the Projector's Buttons" p.78
• "Installing a Security Cable" p.80
Password Security Types
You can set up the following types of password security using one shared
password:
• Power On Protection password prevents anyone from using the projector
without first entering a password. When plugging the power cord and
turning on the projector at first time, you must enter the correct password.
This also applies to Direct Power On and Auto Power On.
• User's Logo Protection password prevents anyone from changing the
custom screen displayed when the projector turns on, when no signal is
being input, or when you use the A/V Mute feature. The custom screen
discourages theft by identifying the projector's owner.
• Network Protection password prevents anyone from changing the
projector's Network settings.
g Related Links
• "Setting a Password" p.76
• "Selecting Password Security Types" p.77
• "Entering a Password to Use the Projector" p.78
You see the Password Protection setting menu.
a
If Password Protection is already activated, you must enter the
correct password to display the Password Protection setting
menu.
b Select Password and press [Enter].
o
nl
ow
D
ad
Projector Security Features
ed
77
m
fro
an
.v
w
w
w
You see the prompt "Change the password?".
e
.b
a
After setting a password, you see this menu, allowing you to select the
password security types you want to use.
re
or
c Select Yes and press [Enter].
nb
de
Selecting Password Security Types
If you select No, the Password Protection setting menu is
displayed again.
down the [Num] button on the remote control and use the
d Hold
numeric buttons to set a four-digit password.
If you do not see this menu, hold down the [Freeze] button on the remote
control for 5 seconds until the menu appears.
The password displays as **** as it is entered. A confirmation prompt is
displayed when you enter the fourth digit.
the password again.
e Enter
You see the message "Password accepted". If you enter the password
incorrectly, a message is displayed prompting you to re-enter the
password.
f Press [Esc] to return to the menu.
g Make a note of the password and keep it in a safe place.
• To prevent unauthorized use of the projector, select On as the Power On
Protection setting.
• To prevent changes to the User's Logo screen or related display settings,
select On as the User's Logo Protection setting.
• To prevent changes to network settings, select On as the Network
Protection setting.
You can attach the password protect sticker to the projector as an additional
theft deterrent.
a
Be sure to keep the remote control in a safe place; if you lose it, you will
not be able to enter the password.
ad
o
nl
ow
D
78
ed
Projector Security Features
m
fro
de
• If an incorrect password is entered three times in succession, the message
"The projector's operation will be locked." is displayed for approximately
5 minutes, and the projector switches to standby mode. If this happens,
disconnect the power plug from the electrical outlet, reinsert it, and turn
the projector back on. The projector displays the password entry screen
again so that you can enter the correct password.
• If you have forgotten the password, make a note of the "Request Code:
xxxxx" number that appears on the screen and contact Epson for help.
• If you continue to repeat the above operation and input the wrong
password 30 times in succession, the message "The projector's operation
will be locked. Contact Epson as described in your documentation." is
displayed and the projector does not accept any more password entries.
Contact Epson for help.
re
or
nb
When the password screen is displayed, enter the correct password.
Attention
an
.v
w
w
w
Entering a Password to Use the Projector
e
.b
down the [Num] button on the remote control while you enter
a Hold
the password using the numeric buttons.
Locking the Projector's Buttons
You can lock the buttons on the control panel to prevent anyone from using
the projector. You can lock all the buttons or all the buttons except the power
button. The projector can still be operated using the remote control.
a Press the [Menu] button on the control panel or remote control.
The password screen closes.
the password is incorrect, you see a message and a prompt to try
b Ifagain.
Enter the correct password to proceed.
ad
o
nl
ow
D
79
ed
Projector Security Features
m
fro
w
w
w
d Select Control Panel Lock and press [Enter].
c Select Lock Setting and press [Enter].
one of these lock types and press [Enter]:
e Select
• To lock all of the projector's buttons, select Full Lock.
re
or
nb
de
an
.v
b Select Settings and press [Enter].
e
.b
• To lock all buttons except the power button, select Partial Lock.
You see a confirmation prompt.
f Select Yes and press [Enter].
The control panel buttons are locked using the setting you chose.
g Related Links
• "Unlocking the Projector's Buttons" p.79
Unlocking the Projector's Buttons
If the projector's buttons have been locked, do one of the following to unlock
them.
• Hold down the [Enter] button on the control panel for 7 seconds.
A message is displayed and the lock is released.
ad
o
nl
ow
D
80
ed
Projector Security Features
m
fro
re
or
nb
de
an
.v
e
.b
s Settings > Lock Setting > Control Panel Lock
w
w
w
• Select Off as the Control Panel Lock setting in the projector's Settings
menu.
g Related Links
• "Projector Feature Settings - Settings Menu" p.105
Installing a Security Cable
You can install two types of security cables on the projector to deter theft.
• Use the security slot on the projector to attach a Kensington Microsaver
Security system.
a
For more details on the Microsaver Security System, see
http://www.kensington.com/.
• Use the security cable attachment point on the projector to attach a wire
cable and secure it to a room fixture or heavy furniture.
a
You can use a commercially available theft-prevention wire lock. See
the documentation supplied with the wire lock for locking
instructions.
ed
ad
o
nl
ow
D
m
fro
e
g Related Links
• "Wireless Network Projection" p.82
• "Using a QR Code to Connect a Mobile Device" p.87
• "Using Quick Wireless Connection (Windows Only)" p.89
.b
Follow the instructions in these sections to set up your projector for use on a network.
re
or
nb
de
an
.v
w
w
w
Using the Projector on a Network
o
nl
ow
D
ad
Wireless Network Projection
ed
82
m
fro
de
Attention
an
.v
Never remove the module while its indicator is blue or flashing, or while you are
projecting wirelessly. This could damage the module or lose data.
re
or
nb
e
.b
• To do this, you must install the Epson 802.11b/g/n wireless LAN module,
and then set up your projector and computer for wireless projection (EBW31/EB-X36/EB-X31/EB-S31/EB-U04/EB-W04/EB-X04/EB-S04/EBU130/EB-W130/EB-X130/EB-S130/EB-X350/EB-X300/EB-S300).
• Some models have built-in wireless LAN modules (EB-U32/EB-W32). You
don't need to install the Epson 802.11b/g/n wireless LAN module.
w
w
w
You can send images to your projector through a wireless network.
a cross-head screwdriver to remove the screw that secures the
a Use
wireless LAN module cover.
There are two ways to connect the projector to your wireless network:
• Using the optional Quick Wireless Connection USB Key (Windows only)
• Configuring the connection manually using the projector's Network menus
After installing the wireless LAN module and setting up the projector, install
the network software from the Epson Projector Software CD-ROM (if
available) or download the software, as necessary. Use the following software
and documentation to set up and control wireless projection:
• EasyMP Network Projection software sets up your computer for wireless
network projection. See the EasyMP Network Projection Operation Guide for
instructions.
• EasyMP Multi PC Projection software allows you to hold interactive
meetings by projecting the computer screens of users over a network. See
the EasyMP Multi PC Projection Operation Guide for instructions.
g Related Links
• "Installing the Wireless LAN Module" p.82
• "Selecting Wireless Network Settings Manually" p.83
• "Selecting Wireless Network Settings in Windows" p.85
• "Selecting Wireless Network Settings in OS X" p.85
• "Setting Up Wireless Network Security" p.85
Installing the Wireless LAN Module
To use the projector over a wireless network, install the Epson 802.11b/g/n
wireless LAN module (EB-W31/EB-X36/EB-X31/EB-S31/EB-U04/EBW04/EB-X04/EB-S04/EB-U130/EB-W130/EB-X130/EB-S130/EB-X350/EBX300/EB-S300). Do not install any other type of wireless LAN module.
b Connect the wireless LAN module to the USB-A port.
ad
o
nl
ow
D
83
ed
Wireless Network Projection
m
fro
w
w
w
b Select the Network menu and press [Enter].
re
or
nb
de
an
.v
the wireless LAN module cover, and secure it in place with the
c Attach
screw.
e
.b
c Select Wireless LAN On as the Wireless Mode setting.
Selecting Wireless Network Settings Manually
Before you can project from your wireless network, you need to select
network settings for the projector.
a Press the [Menu] button on the control panel or remote control.
d Select Network Configuration and press [Enter].
o
nl
ow
D
ad
Wireless Network Projection
ed
84
m
fro
w
w
w
g Select the Wireless LAN menu and press [Enter].
the basic options as necessary.
f Select
• Projector Name lets you enter a name up to 16 alphanumeric
the Connection Mode setting.
h Select
• Quick lets you quickly connect to one computer.
re
or
nb
de
an
.v
e Select the Basic menu and press [Enter].
e
.b
characters long to identify the projector over the network.
• Web Control Password lets you enter a password up to 8
alphanumeric characters long for accessing the projector over the
Web. (Default user name is EPSONWEB; default password is
admin.)
• Projector Keyword lets you turn on a security password to prevent
access to the projector by anyone not in the room with it. You must
enter a displayed, randomized keyword from a computer using the
EasyMP Network Projection software to access the projector.
a
Use the displayed keyboard to enter the name, passwords and
keyword. Press the arrow buttons on the remote control to
highlight characters and press [Enter] to select them.
• Advanced lets you connect to computers over a wireless network
access point.
you selected the Advanced connection mode, select Search Access
i IfPoint
to select the access point you want to connect to.
a
If you need to assign the SSID manually, select SSID to enter the
SSID.
the Advanced connection mode, assign the IP settings for your
j For
network as necessary.
• If your network assigns addresses automatically, select IP Settings to
set the DHCP setting to On.
• If you must set addresses manually, select IP Settings to set the
DHCP setting to Off, and then enter the projector's IP Address,
Subnet Mask, and Gateway Address as necessary.
o
nl
ow
D
ad
Wireless Network Projection
ed
85
m
fro
access your wireless utility software, double-click the network icon
a Toon the
Windows taskbar.
connecting in Advanced connection mode, select the network
b When
name (SSID) of the network the projector is connecting to.
c Click Connect.
re
or
nb
de
an
.v
to Off.
w
w
w
prevent the SSID or IP address from being displayed on the standby
k Toscreen,
set the SSID Display setting or the IP Address Display setting
the [LAN] button on the remote control.
m Press
The wireless network settings are complete when you see the correct IP
address on the LAN standby screen.
e
menus.
.b
you have finished selecting settings, select Complete and then
l When
follow the on-screen instructions to save your settings and exit the
Selecting Wireless Network Settings in OS X
Before connecting to the projector, select the correct wireless network in OS
X.
EB******
a Click the AirPort icon on the menu bar at the top of the screen.
connecting in Advanced connection mode, make sure AirPort is
b When
turned on and select the network name (SSID) of the network the
projector is connecting to.
Setting Up Wireless Network Security
When you have finished making wireless settings for your projector, you need
to select the wireless network on your computer. Then start the network
software to send images to your projector through a wireless network.
a
If you use the EasyMP Network Projection software, make sure you
select the connection mode that matches the projector's connection
mode you selected.
Selecting Wireless Network Settings in Windows
Before connecting to the projector, select the correct wireless network on your
computer.
You can set up security for your projector to use on a wireless network. Set up
one of the following security options to match the settings used on your
network:
• WPA2-PSK security
• WPA/WPA2-PSK security
a
Contact your network administrator for guidance on entering the
correct information.
a Press the [Menu] button on the control panel or remote control.
b Select the Network menu and press [Enter].
ad
o
nl
ow
D
86
ed
Wireless Network Projection
m
fro
re
or
nb
de
e
.b
g Related Links
• "Network Menu - Security Menu" p.111
an
.v
e Select the security settings to match your network settings.
you have finished making settings, select Complete and follow
f When
the on-screen instructions to save your settings and exit the menus.
w
w
w
c Select Network Configuration and press [Enter].
d Select the Security menu and press [Enter].
o
nl
ow
D
ad
Using a QR Code to Connect a Mobile Device
ed
87
m
fro
w
w
w
d Select the Basic menu and press [Enter].
re
or
nb
de
an
.v
After selecting the wireless network settings for your projector, you can
display a QR code on the screen and use it to connect a mobile device using
the Epson iProjection app.
e
.b
a
• Make sure you have installed the latest version of Epson iProjection
(V1.3.0 or later) on your device.
• You can download Epson iProjection for free from the App Store or
from Google play. Any fees incurred when communicating with the
App Store or Google play are the responsibility of the customer.
• You need to setup a Wi-Fi profile when using Epson iProjection for
iOS for the first time.
a Press the [Menu] button on the control panel or remote control.
b Select the Network menu and press [Enter].
e Set the Display LAN Info. setting to Text & QR Code.
Complete and then follow the on-screen instructions to save
f Select
your settings and exit the menus.
the [LAN] button on the remote control or select Display the QR
g Press
Code in the projector's Network menu.
The QR code is displayed on the projected surface.
a
c
Select Network Configuration and press [Enter].
If you do not see the QR code after pressing the [LAN] button,
press [Enter] to display the code.
h Start Epson iProjection on your mobile device.
the projected QR code with your mobile device to connect it to
i Read
the projector.
ad
o
nl
ow
D
88
ed
Using a QR Code to Connect a Mobile Device
m
fro
re
or
nb
de
e
.b
When a connection is established, the image from the mobile device is
displayed. Tap Files on the application screen, and then select the file
you want to project.
an
.v
w
w
w
a
To correctly read the QR code, make sure you face the screen
squarely and closely enough so that the projected code fits into
the guide of the mobile device's QR code reader. If you are too
far from the screen, the code may not be read.
o
nl
ow
D
ad
Using Quick Wireless Connection (Windows Only)
ed
89
m
fro
You see a projected message that the network information update is
complete.
the Quick Wireless Connection USB Key.
e Remove
If your projector needs the wireless LAN module, reinsert the wireless
LAN module into the projector.
the Quick Wireless Connection USB Key to a USB port on
f Connect
your computer.
e
• Connect the Quick Wireless Connection USB Key to the projector's
USB-A port (EB-U32/EB-W32).
.b
• Remove the wireless LAN module from the projector and insert the
Quick Wireless Connection USB Key into the same port used for the
wireless LAN module (EB-W31/EB-X36/EB-X31/EB-S31/EBU04/EB-W04/EB-X04/EB-S04/EB-U130/EB-W130/EB-X130/EBS130/EB-X350/EB-X300/EB-S300).
re
or
one of the following to connect the Quick Wireless Connection
d Do
USB Key.
nb
address are displayed.
In Windows Vista, if the AutoPlay window is displayed, select
Run LaunchQWRD.exe, then select Allow.
de
sure the wireless LAN module is installed or built into your
a Make
projector.
b Turn on the projector.
the [LAN] button on the remote control.
c Press
The LAN standby screen is displayed. Verify that an SSID and IP
a
an
.v
a
The Quick Wireless Connection USB Key is not included with your
projector.
w
w
w
You can use the Quick Wireless Connection USB Key to quickly connect the
projector to a Windows computer wirelessly and project your presentation.
the on-screen instructions to install the Quick Wireless
g Follow
Connection driver.
a
If the Windows Firewall message is displayed, click Yes to disable
the firewall.
After a few minutes, your computer image is displayed by the projector.
If it does not appear, press the [LAN] button on your projector's
remote control or restart your computer.
h Run your presentation.
you have finished projecting wirelessly, select the Safely Remove
i When
Hardware option in the Windows taskbar, and then remove the Quick
Wireless Connection USB Key from your computer.
a
You may need to restart your computer to reactivate your
wireless LAN connection.
ed
ad
o
nl
ow
D
m
fro
e
g Related Links
• "EasyMP Monitor" p.91
• "Controlling a Networked Projector Using a Web Browser" p.92
• "Setting Up Projector Network E-Mail Alerts" p.94
• "Setting Up Monitoring Using SNMP" p.95
• "Using ESC/VP21 Commands" p.96
.b
Follow the instructions in these sections to monitor and control the projector over a network.
re
or
nb
de
an
.v
w
w
w
Monitoring and Controlling the Projector
ad
o
nl
ow
D
91
ed
EasyMP Monitor
m
fro
re
or
nb
de
e
.b
http://www.epson.com/
an
.v
You can download EasyMP Monitor from the following Web site.
w
w
w
EasyMP Monitor software (Windows only) lets you monitor and control your
projector through the network. See the EasyMP Monitor Operation Guide for
instructions.
ad
o
nl
ow
D
92
ed
Controlling a Networked Projector Using a Web Browser
m
fro
• You cannot select the following settings using a Web browser.
Test Pattern, Pointer Shape, User Button, User's Logo,
Language, Reset Lamp Hours and all the settings in the
Network menu
• You can select the following settings only using a Web
browser.
• SNMP Community Name (up to 32 alphanumeric
characters)
• Monitor Password (up to 16 alphanumeric characters)
• HTTP port (port number used for Web Control except for
80 [default], 843, 3620, 3621, 3625, 3629, 4352, 4649, 5357,
10000, 10001, 41794)
re
or
nb
de
a
an
.v
w
w
w
Once you have connected your projector to your network, you can select
projector settings and control projection using a compatible Web browser.
This lets you access the projector remotely.
a Make sure the projector is turned on.
b Start your Web browser on a computer connected to the network.
the projector's IP address into the browser's address box and press
c Type
the computer's Enter key.
You see the Web Control screen.
a
• You may need to log in before you see the Web Control screen.
If you see a log in window, enter your user name and
password. (The default user name is EPSONWEB and the
default password is admin.)
• You can change the password in the Web Control Password
menu in the projector's Network menu.
s Network > Basic > Web Control Password
menu settings, select the name of the menu and
d Tofollowselecttheprojector
on-screen instructions to select settings.
e
.b
a
• Make sure the computer and projector are connected to the network.
When projecting images via a wireless LAN, connect in Advanced
connection mode.
• The Web setup and control features support Internet Explorer 8.0 or
later, and Safari on networks that do not use a proxy server for
connection. Use Safari for OS X. You cannot select all of the
projector menu settings or control all projector functions using a
Web browser.
• If you set Standby Mode to Communication On in the projector's
ECO menu, you can use a Web browser to select settings and control
projection even if the projector is in standby mode (when the power
is off).
e To control projection remotely, select the Web Remote option.
ad
o
nl
ow
D
93
ed
Controlling a Networked Projector Using a Web Browser
m
fro
S-Video is available with the EB-W32/EB-W31/EB-X36/EBX31/EB-S31/EB-W04/EB-X04/EB-S04/EB-W130/EB-X130/EBS130/EB-X350/EB-X300/EB-S300.
re
or
nb
de
a
an
.v
w
w
w
the icon corresponding to the projector function you want to
f Select
control.
e
.b
g Related Links
• "Network Menu - Basic Menu" p.109
• "Projector Setup Settings - ECO Menu" p.115
A Power button control
B Selects Computer port source
C Selects S-Video, Video or HDMI/MHL port source
D Freeze button control
E A/V Mute button control
F Page Up and Page Down button controls
G Searches for sources
H Selects the network source
I Selects the USB Display or USB device source
J Volume button controls
K Displays the QR code
o
nl
ow
D
ad
Setting Up Projector Network E-Mail Alerts
ed
94
m
fro
re
or
nb
de
e
.b
a Press the [Menu] button on the control panel or remote control.
b Select the Network menu and press [Enter].
c Select Network Configuration and press [Enter].
d Select the Mail menu and press [Enter].
a number for the SMTP server Port Number, from 1 to 65535
g Select
(default is 25).
an address field, enter the e-mail address, and select the alerts
h Choose
you want to receive. Repeat for up to three addresses.
an
.v
If you set the Standby Mode setting to Communication On in the projector's
ECO menu, you can receive the e-mail alerts even if the projector is in
standby mode (when the power is off).
w
w
w
You can set up the projector to send you an e-mail alert over the network if
there is a problem with the projector.
a
Your e-mail address can be up to 32 alphanumeric characters
long.
you finish selecting settings, select Complete and follow the oni When
screen instructions to save your settings and exit the menus.
a
If a critical problem causes a projector to shut down, you may not
receive an e-mail alert.
g Related Links
• "Network Projector E-mail Alert Messages" p.94
• "Projector Setup Settings - ECO Menu" p.115
Network Projector E-mail Alert Messages
When a problem occurs with a projector on the network, and you selected to
receive e-mail alerts, you receive an e-mail containing the following
information:
e Set the Mail Notification setting to On.
f Enter the IP address for the SMTP Server option.
a
Do not use these addresses: 127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number from 0 to 255).
•
•
•
•
•
Address for Address 1 as the mail sender
Epson Projector in the subject line
The name of the projector experiencing a problem
The IP address of the affected projector
Detailed information about the problem
ad
o
nl
ow
D
95
ed
Setting Up Monitoring Using SNMP
m
fro
re
or
e
.b
Do not use these addresses: 127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number from 0 to 255).
nb
a
de
e Set the SNMP setting to On.
up to two IP addresses to receive SNMP notifications, using 0 to
f Enter
255 for each address field.
you have finished selecting settings, select Complete and follow
g When
the on-screen instructions to save your settings and exit the menus.
an
.v
a Press the [Menu] button on the control panel or remote control.
b Select the Network menu and press [Enter].
c Select Network Configuration and press [Enter].
d Select the Others menu and press [Enter].
w
w
w
Network administrators can install SNMP (Simple Network Management
Protocol) software on network computers so they can monitor projectors. If
your network uses this software, you can set up the projector for SNMP
monitoring.
o
nl
ow
D
ad
Using ESC/VP21 Commands
ed
96
m
fro
nb
de
The following commands are available.
re
or
e
.b
Setting Up for Using ESC/VP21 Commands
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
an
.v
g Related Links
• "Setting Up for Using ESC/VP21 Commands" p.96
• "ESC/VP21 Command List" p.96
• "Communications Protocol" p.96
w
w
w
You can monitor and control the projector from a computer via USB.
Connect the computer and the projector with a USB cable, and enter the
communication commands (ESC/VP21 commands).
Item
Power On/Off
Signal selection
Command
On
PWR ON
Off
PWR OFF
Computer
Auto
SOURCE 1F
RGB
SOURCE 11
Component
SOURCE 14
The first time you control and monitor the projector using ESC/VP21
commands, you must install the USB communication driver on your
computer and set up the projector. You do not need to install the driver the
next time.
HDMI, HDMI1
SOURCE 30
HDMI2 *
SOURCE A0
a
Video
SOURCE 41
S-Video **
SOURCE 42
USB Display
SOURCE 51
USB
SOURCE 52
LAN
SOURCE 53
On
MUTE ON
Off
MUTE OFF
Install the USB communication driver (EPSON USB-COM Driver) on
your computer. For information about the EPSON USB-COM Driver,
contact Epson.
b
your computer to the projector's USB-B port using a USB
c Connect
cable.
Set the USB Type B setting to Link 21L in the projector's Extended
menu.
You can start from step 2 the next time you use the commands.
ESC/VP21 Command List
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has turned
on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and returns a
":", and then accepts the next command.
A/V Mute On/Off
* HDMI2 is available only with the EB-U32/EB-U04/EB-U130.
** S-Video is available only with the EB-W32/EB-W31/EB-X36/EB-X31/EBS31/EB-W04/EB-X04/EB-S04/EB-W130/EB-X130/EB-S130/EB-X350/EBX300/EB-S300.
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
Contact Epson for more details.
Communications Protocol
• Default baud rate setting: 9600 bps
ad
o
nl
ow
D
97
ed
Using ESC/VP21 Commands
m
fro
re
or
nb
de
an
.v
e
.b
Data length: 8 bit
Parity: None
Stop-bit: 1 bit
Flow control: None
w
w
w
•
•
•
•
ed
ad
o
nl
ow
D
m
fro
e
g Related Links
• "Using the Projector's Menus" p.99
• "Using the On-screen Keyboard" p.100
• "Image Quality Settings - Image Menu" p.101
• "Input Signal Settings - Signal Menu" p.103
• "Projector Feature Settings - Settings Menu" p.105
• "Projector Setup Settings - Extended Menu" p.107
• "Projector Network Settings - Network Menu" p.109
• "Projector Setup Settings - ECO Menu" p.115
• "Projector Information Display - Info Menu" p.116
• "Projector Reset Options - Reset Menu" p.118
• "Copy Menu Settings to Another Projector (Batch Setup)" p.119
.b
Follow the instructions in these sections to access the projector menu system and change projector settings.
re
or
nb
de
an
.v
w
w
w
Adjusting the Menu Settings
ad
o
nl
ow
D
99
ed
Using the Projector's Menus
m
fro
e
.b
The available settings depend on the current input source.
re
or
a
nb
the up or down arrow buttons to move through the menus listed
b Press
on the left. The settings for each menu are displayed on the right.
de
You see the menu screen displaying the Image menu settings.
c To change settings in the displayed menu, press [Enter].
d Press the up or down arrow button to move through the settings.
the settings using the buttons listed on the bottom of the menu
e Change
screens.
f To return all the menu settings to their default values, select Reset.
g When you finish changing settings on a menu, press [Esc].
h Press [Menu] or [Esc] to exit the menus.
an
.v
a Press the [Menu] button on the control panel or remote control.
w
w
w
You can use the projector's menus to adjust the settings that control how your
projector works. The projector displays the menus on the screen.
o
nl
ow
D
ad
Using the On-screen Keyboard
ed
100
m
fro
Available Text Using the On-screen Keyboard
You can enter the following text when using the on-screen keyboard.
Text type
Details
Numbers
0123456789
e
g Related Links
• "Available Text Using the On-screen Keyboard" p.100
• "Controlling a Networked Projector Using a Web Browser" p.92
ABCDEFGHIJKLMNOPQRSTUVWXY
Z
abcdefghijklmnopqrstuvwxyz
.b
entering the text, select Finish on the keyboard to confirm your
b After
entries. Select Cancel to cancel entering text.
re
or
Each time you select the CAPS key, the characters change
between upper case and lower case. Each time you select the
SYM1/2 key, the symbols enclosed by the frame change.
nb
a
Alphabet
Details
de
[Enter] button.
Text type
an
.v
the arrow buttons on the control panel or remote control to
a Use
highlight the number or character you want to enter and press the
w
w
w
The on-screen keyboard is displayed when you need to enter numbers and
characters.
Symbols
!"#$%&'()*+,-./:;<=>?@[\]
^_`{|}~
o
nl
ow
D
ad
Image Quality Settings - Image Menu
ed
101
m
fro
an
.v
w
w
w
Setting
Options
Description
Color Temp.
Color Temp.
Customized
Image
Enhancement
Noise Reduction
Reduces flickering in analog images.
Advanced
Deinterlacing
(For interlaced
signal
[480i/576i/1080i]
input)
Sets whether or not to convert
interlaced-to-progressive signals for
certain video image types.
Off: for fast-moving video images.
Video: for most video images.
Film/Auto: for movies, computer
graphics, and animation.
Auto Iris
Off
Normal
High Speed
Adjusts the projected luminance based
on the image brightness when the Color
Mode is set to Dynamic or Cinema.
Reset
—
Resets all adjustment values except Color
Mode on the Image menu to their
default settings.
re
or
nb
de
Settings on the Image menu let you adjust the quality of your image for the
input source you are currently using. The available settings depend on the
currently selected input source.
e
.b
Sets the color tone based on color
temperature. The image is tinted blue
when a high value is selected and tinted
red when a low value is selected.
Color Temp.: select to set the color
temperature range from 3200K to
10000K (for sRGB mode) or from 0 to 10
(for other color modes).
Customized: adjusts the individual R
(red), G (green), and B (blue)
components of the offset and gain.
To change settings for an input source, make sure the source is connected and
select that source.
Setting
Options
Description
Color Mode
See the list of
available Color
Modes
Adjusts the vividness of image colors for
various image types and environments.
Brightness
Varying levels
available
Lightens or darkens the overall image.
Contrast
Varying levels
available
Adjusts the difference between light and
dark areas of the image.
Color Saturation
Varying levels
available
Adjusts the intensity of the image colors.
Tint
Varying levels
available
Adjusts the balance of green to magenta
tones in the image.
Sharpness
Varying levels
available
Adjusts the sharpness or softness of
image details.
a
• The Brightness setting does not affect lamp brightness. To change
the lamp brightness mode, use the Power Consumption setting in
the projector's ECO menu.
• You cannot select the Noise Reduction setting when the following
are being input.
• The Deinterlacing setting is set to Off.
• A digital RGB signal is being input.
• An interlaced signal (480i/576i/1080i) is being input.
ad
o
nl
ow
D
102
ed
Image Quality Settings - Image Menu
m
fro
re
or
nb
de
an
.v
w
w
w
g Related Links
• "Available Color Modes" p.53
e
.b
o
nl
ow
D
ad
Input Signal Settings - Signal Menu
ed
103
m
fro
Resolution
Auto
Normal
Wide
Sets the input signal resolution if not
detected automatically using the Auto
option.
See the list of
available aspect
ratios.
Tracking
Varying levels
available
Adjusts the signal to eliminate vertical
stripes in computer images.
Sync.
Varying levels
available
Adjusts the signal to eliminate fuzziness
or flickering in computer images.
Position
Up
Down
Left
Right
Adjusts the image location on the screen.
Auto Setup
On
Off
Automatically optimizes computer image
quality (when On).
Overscan
(For component
video and RGB
video signal input)
Auto
Off
4%
8%
Changes the projected image ratio to
make the edges visible by a selectable
percentage or automatically.
Sets the aspect ratio (width-to-height
ratio) for the selected input source.
e
Description
Aspect
.b
Options
Description
re
or
Setting
Options
nb
To change settings for an input source, make sure the source is connected and
select that source.
Setting
de
a
You can restore the default settings of the Tracking, Sync., and
Position settings by pressing the [Auto] button on the remote control.
an
.v
a
You cannot select settings on the Signal menu when the current input
source is one of the following:
• USB Display
• USB
• LAN
w
w
w
Normally the projector automatically detects and optimizes the input signal
settings. If you need to customize the settings, you can use the Signal menu.
The available settings depend on the currently selected input source.
ad
o
nl
ow
D
104
ed
Input Signal Settings - Signal Menu
m
fro
Auto: detects signals automatically. If
interference appears or no image appears
when set to Auto, select the appropriate
signal according to the connected
equipment.
Reset
—
g Related Links
• "Available Image Aspect Ratios" p.51
Resets all adjustment values on the
Signal menu to their default settings,
except for the following:
• Input Signal
e
HDMI Video Range:
Sets the video range to match the setting
of the device connected to the HDMI
input port.
• Auto: detects the video range
automatically.
• Normal: normally for images from a
device other than a computer; can also
be selected if the black areas of the
image are too bright.
• Expanded: normally for images from a
computer; can also be selected if the
image is too dark.
Input Signal:
Specifies the signal type from the input
sources connected to the computer ports.
• Auto: detects signals automatically.
• RGB: corrects color for computer/RGB
video inputs.
• Component: corrects color for
component video inputs.
Video Signal:
Specifies the signal type from the input
sources connected to the video ports.
.b
HDMI Video
Range
Input Signal
Video Signal
re
or
Advanced
nb
Description
de
Options
an
.v
w
w
w
Setting
o
nl
ow
D
ad
Projector Feature Settings - Settings Menu
ed
105
m
fro
an
.v
w
w
w
Options on the Settings menu let you customize various projector features.
Options
Description
Volume
Varying levels
available
Lock Setting
Control Panel Lock Controls projector button locking to
secure the projector:
Full Lock: locks all buttons.
Partial Lock: locks all buttons except the
power button.
Off: no buttons locked.
re
or
nb
de
Setting
e
.b
Adjusts the volume of projector’s speaker
system.
Setting values are saved for each source.
Pointer Shape
Pointer 1:
Changes the shape of the remote control
pointer.
Pointer 2:
Pointer 3:
Setting
Options
Description
Keystone
H/V-Keystone
Quick Corner
Adjusts image shape to rectangular
(horizontally and vertically).
H/V-Keystone: select to manually
correct horizontal and vertical sides, or
turn Auto V-Keystone and H-Keystone
Adjuster on or off.
Quick Corner: select to correct image
shape and alignment using an on-screen
display.
Split Screen
Screen Size
Source
Swap Screens
Audio Source
Display the QR
Code
Divides the viewing area horizontally and
displays two images side-by-side (press
[Esc] to cancel split screen display).
Zoom
(EB-S31/EBS04/EB-S130/EBS300)
—
Adjusts the size of the projected image.
Remote Receiver
Front/Rear
Front
Rear
Off
Limits reception of remote control
signals by the selected receiver; Off turns
off all receivers.
User Button
Power
Consumption
Info
Deinterlacing
Test Pattern
Resolution
Display the QR
Code
Assigns a menu option to the [User]
button on the remote control for onetouch access.
ad
o
nl
ow
D
106
ed
Projector Feature Settings - Settings Menu
m
fro
Attention
If a pattern is displayed for a
long time, a residual image may
be visible in projected images.
Reset
—
Resets all adjustment values on the
Settings menu to their default settings,
except for the following:
• Zoom
• User Button
e
Displays a test pattern to assist in
focusing and zooming the image and
correcting image shape (press the [Esc]
button to cancel pattern display).
.b
—
re
or
Test Pattern
nb
Description
de
Options
an
.v
w
w
w
Setting
o
nl
ow
D
ad
Projector Setup Settings - Extended Menu
ed
107
m
fro
Messages
Display
Background
Startup Screen
A/V Mute
User's Logo
—
Creates a screen that the projector
displays to identify itself and enhance
security.
Projection
Front
Front/Ceiling
Rear
Rear/Ceiling
Selects the way the projector faces the
screen so the image is oriented correctly.
Selects various display options:
Messages: set to On to display messages
such as input source name, color mode
name, aspect ratio, no signal message, or
high temperature warning on your
projected image.
Display Background: sets the screen
color or logo to display when no signal is
received.
Startup Screen: set to On to display the
user's logo when projection starts.
A/V Mute: sets the screen color or logo
to display when A/V Mute is turned on.
e
Selects the projector's Home screen
display options:
Home Screen Auto Disp.: select whether
or not to display the Home screen
automatically.
Custom Function 1/Custom Function
2: select to set functions and the display
as the customized Home screen.
Display
.b
Home Screen Auto
Disp.
Custom Function 1
Custom Function 2
Description
re
or
Home Screen
Options
nb
Description
Setting
de
Options
an
.v
Setting
w
w
w
Settings on the Extended menu let you customize various projector setup
features.
o
nl
ow
D
ad
Projector Setup Settings - Extended Menu
ed
108
m
fro
USB Type B
USB Display
Link 21L
USB Display: enables the USB Display.
Link 21L: enables ESC/VP21 commands.
Projector ID
Off
1 through 9
Assigns an ID for the projector when you
use multiple projectors.
Language
Various languages
available
Select the language for projector menu
and message displays.
Reset
—
Resets all adjustment values on the
Extended menu to their default settings,
except for the following:
• User's Logo
• Projection
• High Altitude Mode
• Auto Source Search
• USB Type B
• Projector ID
• Language
a
e
Selects various operation options:
Direct Power On: lets you turn on the
projector by plugging it in without
pressing the power button.
High Altitude Mode: regulates the
projector’s operating temperature at
altitudes above 1500 m.
Auto Source Search: set to On to detect
the input signal automatically and
project images when there is no input
signal.
Auto Power On: select the image source
from which you want to automatically
start projection. When the projector
detects the input signal from the selected
image source, it projects automatically in
standby mode. To enable this feature,
connect the projector using a VGA
computer cable or USB cable.
.b
Direct Power On
High Altitude
Mode
Auto Source Search
Auto Power On
re
or
Operation
When you set User's Logo Protection to On in the Password
Protection screen, you cannot change settings related to user's logo
display (Display Background, Startup Screen, A/V Mute in the
Display setting). Set User's Logo Protection to Off first.
nb
Description
de
Options
an
.v
w
w
w
Setting
g Related Links
• "Selecting Password Security Types" p.77
o
nl
ow
D
ad
Projector Network Settings - Network Menu
ed
109
m
fro
Configures your wireless LAN settings.
Select Wireless LAN On when
connecting the projector and a computer
over a wireless LAN. If you do not want
to connect via wireless LAN, turn it off to
prevent unauthorized access by others.
Connection Mode
Wireless LAN Sys.
Antenna Level
Projector Name
SSID
DHCP
IP Address
Subnet Mask
Gateway Address
MAC Address
Region Code
Display the QR
Code
—
Displays the QR code.
Network
Configuration
To additional
network menus
Configures your network settings.
a
Displays wireless network status and
details when you have selected Wireless
Mode to Wireless LAN On.
e
Wireless LAN On
Off
Net. Info. Wireless LAN
.b
Wireless Mode
Description
re
or
Description
Options
nb
Options
Setting
de
Setting
an
.v
When you set Network Protection to On in the Password Protection screen,
you cannot change the network settings. Set Network Protection to Off first.
w
w
w
Settings on the Network menu let you view network information and set up
the projector for monitoring and controlling over a network.
Once you have connected your projector to your network, you can
select projector settings and control projection using a compatible Web
browser. This lets you access the projector remotely.
g Related Links
• "Network Menu - Basic Menu" p.109
• "Network Menu - Wireless LAN Menu" p.110
• "Network Menu - Security Menu" p.111
• "Network Menu - Mail Menu" p.112
• "Network Menu - Others Menu" p.113
• "Network Menu - Reset Menu" p.113
• "Selecting Password Security Types" p.77
Network Menu - Basic Menu
Settings on the Basic menu let you select the basic network settings.
o
nl
ow
D
ad
Projector Network Settings - Network Menu
ed
110
m
fro
an
.v
w
w
w
s Network > Network Configuration > Basic
Options
Description
Display LAN Info.
Text & QR Code
Text
re
or
nb
de
Setting
e
.b
Set the display format for the projector's
network information.
When a QR code is displayed, you can
connect to the network by simply
reading the QR code with Epson
iProjection. The default value is Text &
QR Code.
Network Menu - Wireless LAN Menu
Settings on the Wireless LAN menu let you select the wireless LAN settings.
s Network > Network Configuration > Wireless LAN
Setting
Options
Description
Projector Name
Up to 16
alphanumeric
characters
(do not use " * + ,
/:;<=>?[\]`|
spaces)
Enter a name to identify the projector
over the network.
Web Control
Password
Up to 8
alphanumeric
characters
(do not use * :
spaces)
Enter a password for accessing the
projector over the Web. (Default user
name is EPSONWEB; default password is
admin.)
Projector Keyword
On
Off
Set to On to enable a security password
to prevent access to the projector by
anyone not in the room with it. You
must enter a displayed, randomized
keyword from a computer using the
EasyMP Network Projection and
EasyMP Multi PC Projection software to
access the projector.
o
nl
ow
D
ad
Projector Network Settings - Network Menu
ed
111
m
fro
Quick
Advanced
Select the type of wireless connection:
Quick: lets you quickly connect to one
computer.
The projector becomes an easy access
point. Select the type of security and set
passphrase in the Security menu as
necessary to use EasyMP Network
Projection to connect in Quick
connection mode.
Advanced: lets you connect to multiple
computers over a wireless network access
point. The connection is established in
infrastructure mode.
SSID Display
On
Off
Channel
1ch
6ch
11ch
In Quick connection mode, selects the
frequency band (channel) used by the
wireless LAN.
SSID
Up to 32
alphanumeric
characters
Sets the SSID (network name) of the
wireless LAN system the projector is
connecting to.
Search Access Point To Search View
Search for available wireless network
access points in Advanced connection
mode. Depending on the access point
settings, they may not be displayed in the
list. You must set security separately.
IP Settings
DHCP: set to On if your network assigns
addresses automatically; set to Off to
manually enter the network's IP
Address, Subnet Mask, and Gateway
Address using 0 to 255 for each address
field.
Do not use these addresses: 0.0.0.0,
127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255) for IP Address and
Gateway Address and 0.0.0.0 and
255.255.255.255 for Subnet Mask.
DHCP
IP Address
Subnet Mask
Gateway Address
IP Address Display On
Off
Select whether to display the SSID on the
network standby screen.
e
Connection Mode
Description
.b
Options
re
or
Setting
nb
Description
de
Options
an
.v
w
w
w
Setting
Select whether to display the IP address
on the network standby screen.
Network Menu - Security Menu
Settings on the Security menu let you select the type of security and security
settings that match the network you are connecting the projector to.
s Network > Network Configuration > Security
Setting
Options
Description
Security
Open
WPA2-PSK
WPA/WPA2-PSK
Selects the type of security used on the
wireless network.
When setting security, follow the
instructions from the administrator of
the network system you want to connect
to.
o
nl
ow
D
ad
Projector Network Settings - Network Menu
ed
112
m
fro
w
w
w
Type of security
When connecting to a wireless network in Advanced connection mode, it is
strongly recommended that you set security.
WPA is an encryption standard that improves the security for wireless
networks. The projector supports TKIP and AES encryption methods.
e
For WPA2-PSK and WPA/WPA2-PSK
security, selects the pre-shared
passphrase used on the network.
When the passphrase is entered and the
[Enter] button is pressed, the value is set
and displayed as an asterisk (*).
When connecting using EasyMP
Network Projection, you do not need to
input the passphrase on the computer if
the passphrase has not been changed
from the default.
We recommend changing the passphrase
periodically for security. If the network
settings are initialized, it returns to the
initial passphrase.
.b
Various
passphrases from 8
to 32 characters
(when entering
from a Web
browser: various
passphrases from 8
to 63 characters)
re
or
Passphrase
s Network > Network Configuration > Mail
nb
Description
de
Options
an
.v
Setting
Setting
Options
Description
Mail Notification
On
Off
Set to On to send an email to the preset
addresses when a problem or warning
occurs with a projector.
SMTP Server
IP address
Enter the IP address for the projector's
SMTP server using 0 to 255 for each
address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Port Number
1 to 65535 (default
is 25)
Select a number for the SMTP server
Port Number.
Address 1 Setting
Address 2 Setting
Address 3 Setting
Up to 32
Enter the e-mail address, and select the
alphanumeric
alerts you want to receive. Repeat for up
characters
to 3 addresses.
(do not use " ( ) , : ;
< > [ \] spaces)
WPA also includes user authentication functions. WPA authentication
provides two methods: using an authentication server, or authenticating
between a computer and an access point without using a server. This
projector supports the latter method, without a server.
a
For setting details, follow the instructions from your network
administrator.
Network Menu - Mail Menu
Settings on the Mail menu let you receive an email notification if a problem
or warning occurs in the projector.
o
nl
ow
D
ad
Projector Network Settings - Network Menu
ed
113
m
fro
Message
Broadcasting
On
Off
e
s Network > Network Configuration > Others
Set to On when connecting to the
network using Bonjour.
See Apple's Web site for more
information on the Bonjour service.
http://www.apple.com/
.b
On
Off
re
or
Bonjour
Description
nb
Options
de
Settings on the Others menu let you select other network settings.
Setting
an
.v
w
w
w
Network Menu - Others Menu
Set to On to enable EPSON Message
Broadcasting feature.
You can download Message Broadcasting
and its Operation Guide from the
following Web site.
http://www.epson.com/
Network Menu - Reset Menu
Settings on the Reset menu let you reset all of the network settings.
s Network > Network Configuration > Reset
Setting
Options
Description
SNMP
On
Off
Set to On to monitor the projector using
SNMP. To monitor the projector, you
need to install the SNMP manager
program on your computer. SNMP
should be managed by a network
administrator.
The default value is Off.
Trap IP Address 1
Trap IP Address 2
IP address
Enter up to two IP addresses to receive
SNMP notifications, using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
ad
o
nl
ow
D
114
ed
Projector Network Settings - Network Menu
m
fro
Select Yes to reset all network settings.
e
.b
Yes
No
re
or
Reset network
settings.
nb
Description
de
Options
an
.v
w
w
w
Setting
o
nl
ow
D
ad
Projector Setup Settings - ECO Menu
ed
115
m
fro
Selects the brightness mode of the
projector lamp:
Normal: sets maximum lamp brightness.
ECO: reduces lamp brightness and fan
noise, and saves power and lamp life.
You cannot select settings when you use
your projector at high altitude or in
locations subject to high temperatures.
Light Optimizer
On
(Available when
Off
Power
Consumption is set
to Normal.)
When set to On, the lamp brightness is
adjusted according to the projected
image. This helps to reduce the power
consumption by lowering the lamp
brightness according to the scene being
projected.
The setting is stored for each Color
Mode.
On
Off
Sleep Mode Timer
1 to 30 minutes
Lens Cover Timer
On
Off
Automatically turns off the projector
after 30 minutes if the lens cover is
closed (when On).
A/V Mute Timer
On
Off
Automatically turns off the projector
after 30 minutes if A/V Mute is enabled
(when On).
Standby Mode
Communication
On
Communication
Off
Communication On indicates that the
projector can be monitored over a
network when the projector is in standby
mode. Enable this setting to allow the
following operations to occur when the
projector is in standby mode:
• Monitor and control the projector over
a network
ECO Display
On
Off
Displays a leaf icon in the bottom left
corner of the projected screen to indicate
the power-saving status when the lamp
brightness changes (when On).
Reset
—
Resets all adjustment values on the ECO
menu to their default settings, except for
Standby Mode.
a
Automatically turns off the projector
after an interval of inactivity (when On).
e
Normal
ECO
Sleep Mode
.b
Power
Consumption
Description
re
or
Description
Options
nb
Options
Setting
de
Setting
an
.v
When you select a power-saving setting, a leaf icon appears next to the menu
item.
w
w
w
Settings on the ECO menu let you customize projector functions to save
power.
Sets the interval for Sleep Mode.
• When the Sleep Mode Timer setting is enabled, the lamp dims for a
short time before the timer limit is reached and the projector turns
off.
• When the Lens Cover Timer or A/V Mute Timer settings are
enabled, the lamp uses less power when the lens cover is closed or
A/V Mute is activated.
g Related Links
• "Projector Setup Settings - Extended Menu" p.107
o
nl
ow
D
ad
Projector Information Display - Info Menu
ed
116
m
fro
an
.v
w
w
w
Info Menu - Projector Info Menu
nb
de
You can display information about the projector and version by viewing the
Info menu. However, you cannot change any settings in the menu.
re
or
You can display information about the projector and input sources by viewing
the Projector Info menu in the projector's Info menu.
e
.b
Information item
Description
Projector Info
Displays the projector information.
Version
Displays the projector's firmware version.
a
g Related Links
• "Info Menu - Projector Info Menu" p.116
The available settings depend on the current input source. The lamp
usage timer does not register any hours until you have used the lamp
for at least 10 hours.
Information item
Description
Lamp Hours
Displays the number of hours (H) the lamp has been
used in Normal and ECO Power Consumption modes;
if the information is displayed in yellow, obtain a
genuine Epson replacement lamp soon.
Source
Displays the name of the port to which the current
input source is connected.
Input Signal
Displays the input signal setting of the current input
source.
Resolution
Displays the resolution of the current input source.
o
nl
ow
D
ad
Projector Information Display - Info Menu
ed
117
m
fro
Sync Info
Displays information that may be needed by a service
technician.
Status
Displays information about projector problems that
may be needed by a service technician.
Serial Number
Displays the projector's serial number.
Event ID
Displays the Event ID number corresponding to a
specific projector problem; see the list of Event ID
codes.
g Related Links
• "Event ID Code List" p.117
Event ID Code List
If the Event ID option on the Info menu displays a code number, check this
list of Event ID codes for the solution to the projector problem associated
with the code.
If you cannot resolve the problem, contact your network administrator or
Epson for technical support.
Event ID
code
Cause and solution
0432
The network software did not start. Turn the projector off and then
on again.
0435
0434
0481
0482
Unstable network communication. Check the network
communication status, wait a few moments, and try connecting to
the network again.
0485
0433
Cannot display the transferred images. Restart the network software.
0483
The network software quit unexpectedly. Check the network
communication status, then turn the projector off and then on again.
e
Displays the refresh rate of the current input source.
Communication with computer was disconnected. Restart the
network software.
.b
Refresh Rate
0484
re
or
Displays the video signal format of the current input
source.
Cause and solution
nb
Video Signal
Event ID
code
de
Description
an
.v
w
w
w
Information item
04FE
0479
04FF
A projector system error has occurred. Turn the projector off and
then on again.
0891
Cannot find an access point with the same SSID. Set your computer,
access point, and projector to the same SSID.
0892
The WPA/WPA2 authentication type does not match. Make sure the
wireless network security settings are correct.
0893
The TKIP/AES encryption type does not match. Make sure the
wireless network security settings are correct.
0894
Communication with an unauthorized access point was
disconnected. Contact your network administrator.
0898
Failed to acquire DHCP. Make sure the DHCP server is operating
correctly. If you are not using DHCP, set the DHCP setting to Off in
the projector's Network menu.
s Network > Wireless LAN > IP Settings > DHCP
0899
Other communication errors.
ad
o
nl
ow
D
118
ed
Projector Reset Options - Reset Menu
m
fro
re
or
e
.b
Input Signal
Zoom
User's Logo
Language
Network menu items
Lamp Hours
Password
nb
•
•
•
•
•
•
•
de
You cannot reset the following settings using the Reset All option:
an
.v
You can also reset the projector's lamp usage timer to zero when you replace
the lamp using the Reset Lamp Hours option.
w
w
w
You can reset most of the projector settings to their default values using the
Reset All option on the Reset menu.
o
nl
ow
D
ad
Copy Menu Settings to Another Projector (Batch Setup)
ed
119
m
fro
Performing Batch Setup Using a USB Flash Drive
You can copy menu settings from one projector to another of the same model
using a USB flash drive.
a
The USB flash drive must use a FAT format and not incorporate any
security function. Delete any files on the drive before using it for batch
setup or the settings may not be saved correctly.
the power cord from the projector, and check that all of the
a Disconnect
projector's indicators have turned off.
e
g Related Links
• "Performing Batch Setup Using a USB Flash Drive" p.119
• "Performing Batch Setup Using a USB Cable" p.120
.b
Epson takes no responsibility for batch setup failures and associated repair costs
due to power outages, communication errors, or other problems that may cause
such failures.
re
or
Caution
nb
a
Perform batch setup before adjusting the image settings such as
Keystone. Since image adjustment values are also copied to another
projector, the adjustments you made before performing the batch setup
are overwritten and the projected screen you adjusted may change.
When copying the menu settings from one projector to another, user's
logo is also copied. Do not register the information that you do not
want to share between multiple projector as a user's logo.
de
• Network menu settings (except for the Mail menu and the Others menu)
• Lamp Hours and Status from the Info menu
an empty USB flash drive directly to the projector's USB-A
b Connect
port.
down the [Esc] button on the remote control or the control panel
c Hold
and connect the power cord to the projector.
all of the projector's indicators turn on, release the [Esc] button.
d When
The indicators start flashing and the batch setup file is written to the
an
.v
Menu settings such as the following are not copied to the other projector.
w
w
w
After selecting the projector's menu settings for one projector, you can save
the settings to a USB flash drive or a computer connected with a USB cable to
copy settings to another projector, as long as they are the same model.
USB flash drive. When writing is finished, the projector turns off.
Caution
Do not disconnect the power cord or the USB flash drive from the projector
while the file is being written. If the power cord or USB flash drive is
disconnected, the projector may not start correctly.
e Remove the USB flash drive.
a
The file name for the batch setup file is PJCONFDATA.bin. If
you need to change the file name, add text after PJCONFDATA
using only alphanumeric characters. If you change the
PJCONFDATA section of the file name, the projector may not be
able to recognize the file correctly.
the power cord from the projector to which you want to
f Disconnect
copy settings, and check that all of the projector's indicators have
turned off.
the USB flash drive containing the saved batch setup file to the
g Connect
projector's USB-A port.
down the [Menu] button on the remote control or the control
h Hold
panel and connect the power cord to the projector.
all of the projector's indicators turn on, release the [Menu]
i When
button. (The indicators remain on for approximately 75 seconds.)
ad
o
nl
ow
D
120
ed
Copy Menu Settings to Another Projector (Batch Setup)
m
fro
re
or
You can copy menu settings from one projector to another of the same model
by connecting the computer and projector with a USB cable.
a
You can use this batch setup method with the following operating
system versions:
• Windows Vista and later
• OS X 10.5.3 and later
the power cord from the projector, and check that all of the
a Disconnect
projector's indicators have turned off.
a USB cable to the computer's USB port and to the projector's
b Connect
USB-B port.
down the [Esc] button on the remote control or the control panel
c Hold
and connect the power cord to the projector.
all of the projector's indicators turn on, release the [Esc] button.
d When
The computer recognizes the projector as a removable disk.
the removable disk icon or folder, and save the batch setup file to
e Open
the computer.
e
Performing Batch Setup Using a USB Cable
.b
j Remove the USB flash drive.
nb
Caution
Do not disconnect the power cord or the USB flash drive from the projector
while the file is being written. If the power cord or drive is disconnected,
the projector may not start correctly.
The file name for the batch setup file is PJCONFDATA.bin. If
you need to change the file name, add text after PJCONFDATA
using only alphanumeric characters. If you change the
PJCONFDATA section of the file name, the projector may not be
able to recognize the file correctly.
de
a
an
.v
w
w
w
When all of the indicators start flashing, the settings are being written.
When writing is finished, the projector turns off.
the USB device (Windows) or drag the removable disk icon to the
f Eject
Trash (OS X).
the USB cable.
g Disconnect
The projector turns off.
the power cord from the projector to which you want to
h Disconnect
copy settings, and check that all of the projector's indicators have
turned off.
the USB cable to the computer's USB port and to the
i Connect
projector's USB-B port.
down the [Menu] button on the remote control or the control
j Hold
panel and connect the power cord to the projector.
all of the projector's indicators turn on, release the [Menu]
k When
button.
The computer recognizes the projector as a removable disk.
the batch setup file (PJCONFDATA.bin) that you saved to your
l Copy
computer to the top level folder of the removable disk.
a
Do not copy any files or folders other than the batch setup file to
the removable disk.
the USB device (Windows) or drag the removable disk icon to the
m Eject
Trash (OS X).
ad
o
nl
ow
D
121
ed
Copy Menu Settings to Another Projector (Batch Setup)
m
fro
Problem and solution
de
Indicator status
an
.v
w
w
w
Writing the settings may have failed and an error may
have occurred in the projector's firmware.
Stop using the projector, remove the power plug from
the electrical outlet. Contact Epson for help.
nb
the USB cable.
n Disconnect
When all of the indicators start flashing, the settings are being written.
re
or
When writing is finished, the projector turns off.
e
.b
Caution
Do not disconnect the power cord from the projector while the file is being
written. If the power cord is disconnected, the projector may not start
correctly.
g Related Links
• "Batch Setup Error Notification" p.121
Batch Setup Error Notification
The projector's indicators notify you if an error occurs during a batch setup
operation. Check the status of the projector's indicators and follow the
instructions described in the table here.
Indicator status
Problem and solution
The batch setup file may be corrupt, or the USB flash
drive or USB cable may not be connected correctly.
Disconnect the USB flash drive or the USB cable,
unplug and then plug in the projector's power cord, and
then try again.
• Lamp: Orange - flashing
fast
• Temp: Orange - flashing
fast
• Power: Blue - flashing
fast
• Status: Blue - flashing
fast
• Lamp: Orange - flashing
fast
• Temp: Orange - flashing
fast
ed
ad
o
nl
ow
D
m
fro
re
or
nb
de
an
.v
w
w
w
Maintaining the Projector
e
.b
You may need to clean the projector's lens periodically, and clean the air filter and air vents to prevent the projector from overheating due to blocked ventilation.
The only parts you should replace are the lamp, air filter, and remote control batteries. If any other part needs replacing, contact Epson or an authorized Epson servicer.
Warning
Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual. Dangerous
electrical voltages in the projector can injure you severely.
g Related Links
• "Cleaning the Lens" p.123
• "Cleaning the Projector Case" p.124
• "Air Filter and Vent Maintenance" p.125
• "Projector Lamp Maintenance" p.127
• "Replacing the Remote Control Batteries" p.132
ad
o
nl
ow
D
123
ed
Cleaning the Lens
m
fro
re
or
e
.b
Do not use glass cleaner or any harsh materials to clean the lens and do not
subject the lens to any impacts; otherwise, it could be damaged. Do not use
canned air, or the gases may leave a flammable residue.
nb
Attention
de
Do not use a lens cleaner that contains flammable gas. The high heat generated
by the projector lamp may cause a fire.
an
.v
Warning
w
w
w
Clean the projector's lens periodically, or whenever you notice dust or
smudges on the surface.
• To remove dust or smudges, gently wipe the lens with lens-cleaning paper.
• To remove stubborn smudges, moisten a soft, lint-free cloth with lens
cleaner and gently wipe the lens. Do not spray any liquid directly on the
lens.
ad
o
nl
ow
D
124
ed
Cleaning the Projector Case
m
fro
re
or
nb
de
e
.b
Do not use wax, alcohol, benzene, paint thinner, or other chemicals to clean the
projector case. These can damage the case. Do not use canned air, or the gases
may leave a flammable residue.
an
.v
Attention
w
w
w
Before cleaning the projector case, turn off the projector and unplug the
power cord.
• To remove dust or dirt, use a soft, dry, lint-free cloth.
• To remove stubborn dirt, use a soft cloth moistened with water and mild
soap. Do not spray liquid directly on the projector.
o
nl
ow
D
ad
Air Filter and Vent Maintenance
ed
125
m
fro
e
a Turn off the projector and unplug the power cord.
remove the dust using a small vacuum designed for computers
b Gently
or a very soft brush (such as a paintbrush).
.b
Clean the projector's air filter or vents if they get dusty, or if you see a
message telling you to clean them.
re
or
Cleaning the Air Filter and Vents
nb
g Related Links
• "Cleaning the Air Filter and Vents" p.125
• "Replacing the Air Filter" p.125
You can remove the air filter so that you can clean both sides. Do
not rinse the air filter in water, or use any detergent or solvent to
clean it.
de
If regular maintenance is not performed, your Epson projector will notify you
when the temperature inside the projector has reached a high level. Do not wait
until this warning appears to maintain your projector filter as prolonged exposure
to high temperatures may reduce the life of your projector or lamp.
a
an
.v
Attention
w
w
w
Regular filter maintenance is important to maintaining your projector. Clean
the air filer when a message appears telling you the temperature inside the
projector has reached a high level. It is recommended that you clean these
parts at least once every three months. Clean them more often than this if you
use the projector in a particularly dusty environment.
Attention
Do not use canned air. The gases may leave a flammable residue or push
dust and debris into the projector's optics or other sensitive areas.
dust is difficult to remove or the air filter is damaged, replace the air
c Iffilter.
Replacing the Air Filter
You need to replace the air filter in the following situations:
• After cleaning the air filter, you see a message telling you to clean or replace
it
• The air filter is torn or damaged
You can replace the air filter while the projector is mounted to the ceiling or
placed on a table.
a Turn off the projector and unplug the power cord.
o
nl
ow
D
ad
Air Filter and Vent Maintenance
ed
126
m
fro
Dispose of used air filters according to local regulations.
• Filter frame: ABS
• Filter: Polyurethane foam
re
or
nb
de
a
an
.v
w
w
w
b Open the air filter cover.
e
.b
the new air filter in the projector as shown and push gently until
d Place
it clicks into place.
c Grip the air filter tab and pull the air filter straight out.
e Close the air filter cover.
g Related Links
• "Replacement Parts" p.148
o
nl
ow
D
ad
Projector Lamp Maintenance
ed
127
m
fro
• If you continue to use the lamp after the replacement period has passed, the
possibility that the lamp may explode increases. When the lamp replacement
message appears, replace the lamp with a new one as soon as possible, even if it
is still working.
• Do not repeatedly turn off the power and then immediately turn it back on.
Turning the power on and off frequently may shorten the lamp's operating life.
• Depending on the characteristics of the lamp and the way it has been used, the
lamp may become darker or stop working before the lamp warning message
appears. You should always have a spare lamp unit ready in case it is needed.
• We recommend the use of genuine Epson replacement lamps. The use of nongenuine lamps may affect projection quality and safety. Any damage or
malfunction caused by the use of non-genuine lamps may not be covered by
Epson's warranty.
re
or
nb
e
.b
• The power indicator is flashing blue, and the projector's lamp indicator is
flashing orange.
de
• The projected image gets darker or quality declines
• A message is displayed when you turn on the projector telling you to replace
the lamp (the message is displayed 100 hours before the expected end of the
lamp life and appears for 30 seconds)
Attention
an
.v
Replace the lamp as soon as possible when the following occurs:
w
w
w
The projector monitors the number of hours the lamp is used and displays
this information in the projector's menu system.
g Related Links
• "Replacing the Lamp" p.127
• "Resetting the Lamp Timer" p.130
• "Projector Specifications" p.155
Replacing the Lamp
You can replace the lamp while the projector is placed on a table or mounted
to the ceiling.
Warning
• Let the lamp fully cool before replacing it to avoid injury.
• Never disassemble or modify the lamp. If a modified or disassembled lamp is
installed in the projector, it could cause a fire, electric shock, or other damage or
injury.
a Turn off the projector and unplug the power cord.
b Allow the projector lamp to cool down for at least one hour.
the screwdriver included with the replacement lamp to loosen the
c Use
screw securing the lamp cover.
ad
o
nl
ow
D
128
ed
Projector Lamp Maintenance
m
fro
w
w
w
re
or
nb
de
e
.b
When replacing the lamp, there is a possibility that the lamp may be
broken. If replacing the lamp of a projector which has been installed on the
ceiling, you should always assume that the lamp is cracked, and you should
stand to the side of the lamp cover, not underneath it. Remove the lamp
cover gently. Be careful when removing the lamp cover as shards of glass
may fall out and could cause an injury. If any shards of glass get into your
eyes or mouth, contact a doctor immediately.
d Slide the lamp cover out and lift it off.
an
.v
Warning
the screws securing the lamp to the projector. The screws do
e Loosen
not come all the way out.
ad
o
nl
ow
D
129
ed
Projector Lamp Maintenance
m
fro
w
w
w
insert the new lamp into the projector. If it does not fit easily,
g Gently
make sure it is facing the right way.
re
or
nb
de
an
.v
f Grip the raised section of the lamp and remove it.
e
.b
a
• If you notice the lamp is cracked when removing the lamp,
contact Epson for help.
• The lamp(s) in this product contain mercury (Hg). Check your
local laws and regulations regarding disposal or recycling. Do
not put in the trash.
Attention
Do not touch any glass on the lamp assembly to avoid premature lamp
failure.
o
nl
ow
D
ad
Projector Lamp Maintenance
ed
130
m
fro
• Make sure the lamp cover is securely installed or the lamp will
not turn on.
• Do not replace the lamp cover with too much force and make
sure the lamp cover is not deformed.
re
or
nb
de
a
an
.v
w
w
w
h Push in the lamp firmly and tighten the screws to secure it.
e
.b
Reset the lamp timer to zero to monitor the new lamp's usage.
g Related Links
• "Replacement Parts" p.148
Resetting the Lamp Timer
You must reset the lamp timer after replacing the projector's lamp to clear the
lamp replacement message and to monitor lamp usage correctly.
a
i Replace the lamp cover and tighten the screw to secure it.
Do not reset the lamp timer if you have not replaced the lamp to avoid
inaccurate lamp usage information.
a Turn on the projector.
b Press the [Menu] button on the control panel or remote control.
c Select the Reset menu and press [Enter].
ad
o
nl
ow
D
131
ed
Projector Lamp Maintenance
m
fro
re
or
nb
de
an
.v
w
w
w
d Select Reset Lamp Hours and press [Enter].
e
.b
You see a prompt asking if you want to reset the lamp hours.
e Select Yes and press [Enter].
f Press [Menu] or [Esc] to exit the menus.
ad
o
nl
ow
D
132
ed
Replacing the Remote Control Batteries
m
fro
re
or
Check the positions of the (+) and (–) marks inside the battery holder to
ensure the batteries are inserted the correct way. If the batteries are not used
correctly, they could explode or leak causing a fire, injury, or damage to the
product.
e
.b
b Remove the old batteries.
c Insert the batteries with the + and – ends facing as shown.
nb
a Open the battery cover as shown.
de
Make sure you read the Safety Instructions before handling the batteries.
Warning
an
.v
Attention
w
w
w
The remote control uses two AA manganese or alkaline batteries. Replace the
batteries as soon as they run out.
d Close the battery cover and press it down until it clicks into place.
ed
ad
o
nl
ow
D
m
fro
e
g Related Links
• "Projection Problems" p.134
• "Projector Indicators Status" p.135
• "Using the Projector Help Displays" p.137
• "Solving Image or Sound Problems" p.138
• "Solving Projector or Remote Control Operation Problems" p.144
• "Solving Network Problems" p.146
.b
Check the solutions in these sections if you have any problems using the projector.
re
or
nb
de
an
.v
w
w
w
Solving Problems
ad
o
nl
ow
D
134
ed
Projection Problems
m
fro
re
or
nb
e
.b
If none of these solutions help, contact Epson for technical support.
de
• The indicators on the projector may indicate the problem.
• The projector's Help system can display information about common
problems.
• The solutions in this manual can help you solve many problems.
an
.v
If this does not solve the problem, check the following:
w
w
w
If the projector is not working properly, turn it off, unplug it, and then plug it
back in and turn it on.
ad
o
nl
ow
D
135
ed
Projector Indicators Status
m
fro
Problem and solutions
Power: Lit blue
Status: Lit blue
Lamp: Off
Temp: Off
Normal operation.
Power: Lit blue
Status: Flashing blue
Lamp: Off
Temp: Off
Warming up or shutting down. When warming up, wait
about 30 seconds for an image to appear.
All buttons are disabled during warm-up and shutting
down.
Power: Flashing blue
Status: Off
Lamp: Off
Temp: Off
Preparing for monitoring and all features are disabled.
Power: Flashing blue
Status: Indicator status
varies
Lamp: Indicator status
varies
Temp: Flashing orange
Projector is too hot.
• Make sure that the vents and air filter are not clogged
with dust or obstructed by nearby objects.
• Clean or replace the air filter.
• Make sure the environmental temperature is not too
hot.
Power: Off
Status: Flashing blue
Lamp: Off
Temp: Lit orange
Projector has overheated and turned off. Leave it turned
off to cool down for 5 minutes.
• Make sure that the vents and air filter are not clogged
with dust or obstructed by nearby objects.
• Clean or replace the air filter.
• If operating the projector at high altitude, set the High
Altitude Mode setting to On in the projector's
Extended menu.
s Extended > Operation > High Altitude Mode
• If the problem persists, unplug the projector and
contact Epson for help.
e
Indicator and status
Standby, sleep mode, or monitoring.
When you press the power button, projection starts.
.b
E Temp (temperature) indicator
Power: Lit blue
Status: Off
Lamp: Off
Temp: Off
re
or
D Lamp indicator
Problem and solutions
nb
C Wireless LAN indicator (operates only on EB-U32 and EB-W32)
Indicator and status
de
B Status indicator
an
.v
A Power indicator
w
w
w
The indicators on the projector indicate the projector status and let you know
when a problem occurs. Check the status and color of the indicators and then
refer to this table for a solution.
o
nl
ow
D
ad
Projector Indicators Status
ed
136
m
fro
an
.v
w
w
w
Problem and solutions
Indicator and status
Problem and solutions
Power: Off
Status: Flashing blue
Lamp: Lit orange
Temp: Off
Lamp has a problem.
• Check to see if the lamp is burned out, broken, or
installed incorrectly. Reseat or replace the lamp as
necessary.
• Clean the air filter.
• If operating the projector at high altitude, set the High
Altitude Mode setting to On in the projector's
Extended menu.
s Extended > Operation > High Altitude Mode
• If the problem persists, unplug the projector and
contact Epson for help.
Lamp cover has a problem.
• Check that the lamp and the lamp cover are securely
installed. The lamp does not turn on if the lamp and
the lamp cover are not installed correctly.
Power: Off
Status: Flashing blue
Lamp: Lit orange
Temp: Lit orange
Power error (Ballast). Turn the projector off, unplug it,
and contact Epson for help.
Wireless LAN indicator
and status
Problem and solutions
Lit blue
Wireless LAN is available.
Flashing blue (quickly)
Connecting to a device.
Flashing blue (slowly)
An error has occurred. Turn off the projector and restart
it.
If this does not solve the problem, contact Epson for
help.
Power: Flashing blue
Status: Indicator status
varies
Lamp: Flashing orange
Temp: Indicator status
varies
Replace the lamp soon to avoid damage. Do not
continue using the projector.
Off
Wireless LAN is not available. Make sure the Wireless
LAN settings are correct.
Power: Off
Status: Flashing blue
Lamp: Off
Temp: Flashing orange
A fan or sensor has a problem. Turn the projector off,
unplug it, and contact Epson for help.
Power: Off
Status: Flashing blue
Lamp: Flashing orange
Temp: Off
Internal projector error. Turn the projector off, unplug
it, and contact Epson for help.
Power: Off
Status: Flashing blue
Lamp: Flashing orange
Temp: Flashing orange
Auto iris error. Turn the projector off, unplug it, and
contact Epson for help.
re
or
nb
e
.b
a
de
Indicator and status
If the indicators display a pattern not listed in the table above, turn the
projector off, unplug it, and contact Epson for help.
g Related Links
• "Cleaning the Air Filter and Vents" p.125
• "Replacing the Air Filter" p.125
• "Replacing the Lamp" p.127
ad
o
nl
ow
D
137
ed
Using the Projector Help Displays
m
fro
the up and down arrow buttons to highlight the problem you want
d Use
to solve.
re
or
nb
de
an
.v
e
.b
a Turn on the projector.
b Press the [Home] button on the control panel or remote control.
w
w
w
You can display information to help you solve common problems using the
projector's Help system.
e Press [Enter] to view the solutions.
one of the following actions when you are finished.
f Perform
• To select another problem to solve, press [Esc].
c
Select Help on the Home screen.
The Help menu is displayed.
• To exit the help system, press [Menu].
ad
o
nl
ow
D
138
ed
Solving Image or Sound Problems
m
fro
re
or
e
.b
• Press the power button to turn the power on.
• Make sure the lens cover is open all the way.
• Press the [A/V Mute] button on the remote control to see if the image was
temporarily turned off.
• If the projector does not respond when you press the [A/V Mute] button, an
internal error may have occurred in the projector. Contact Epson for help.
• Make sure all necessary cables are securely connected and the power is on
for the projector and connected video sources.
• Make sure the image being projected is not completely black (only when
projecting computer images).
• Make sure the projector's menu settings are correct.
• Press the projector's power button to wake it from standby or sleep mode.
Also, check if the connected computer is in sleep mode or displaying a
blank screen saver.
nb
If no image appears, try the following solutions:
de
Solutions When No Image Appears
• Check the settings on the projector's Signal menu to make sure they are
correct for the current video source.
• Adjust the Brightness setting in the projector's Image menu or select the
Normal as the Power Consumption setting in the projector's ECO menu.
• Check the Display setting in the projector's Extended menu to make sure
Messages is set to On.
• If the projector does not respond when you press the control panel buttons,
the buttons may be locked. Unlock the buttons.
• If the projector does not respond when you press buttons on the remote
control, make sure the remote receivers are turned on.
• For images projected with Windows Media Center, reduce the screen size
from full screen mode.
• For images projected from applications using Windows DirectX, turn off
DirectX functions.
• The projector may not be able to project copyrighted videos that you play
back on a computer. For more details, see the manual supplied with the
computer.
an
.v
g Related Links
• "Solutions When No Image Appears" p.138
• "Solutions When Image is Incorrect Using the USB Display Function" p.138
• "Solutions When "No Signal" Message Appears" p.139
• "Solutions When "Not Supported" Message Appears" p.140
• "Solutions When Only a Partial Image Appears" p.140
• "Solutions When the Image is not Rectangular" p.140
• "Solutions When the Image Contains Noise or Static" p.141
• "Solutions When the Image is Fuzzy or Blurry" p.141
• "Solutions When the Image Brightness or Colors are Incorrect" p.142
• "Solutions to Sound Problems" p.142
• "Solutions When Image File Names are not Displayed Correctly in PC Free"
p.143
w
w
w
Check the solutions in these sections if you have any problems with projected
images or sound.
g Related Links
• "Input Signal Settings - Signal Menu" p.103
• "Image Quality Settings - Image Menu" p.101
• "Projector Setup Settings - ECO Menu" p.115
• "Projector Setup Settings - Extended Menu" p.107
• "Unlocking the Projector's Buttons" p.79
Solutions When Image is Incorrect Using the USB
Display Function
If no image appears or if the image appears incorrectly using the USB Display
function, try the following solutions:
• Press the [USB] button on the remote control.
• Make sure the Epson USB Display software has been installed correctly.
Install it manually if necessary.
ad
o
nl
ow
D
139
ed
Solving Image or Sound Problems
m
fro
re
or
e
.b
• Press the [Source Search] button and wait a few seconds for an image to
appear.
• Turn on the connected computer or video source, and press play to begin
your presentation, if necessary.
• Check that all cables required for projection are securely connected.
• Connect the video source directly to the projector.
nb
If the "No Signal" message appears, try the following solutions:
de
Solutions When "No Signal" Message Appears
• If you are projecting from a laptop computer, make sure it is set up to
display on an external monitor.
• If necessary, turn off the projector and the connected computer or video
source, and then turn them back on.
• If you are projecting from an HDMI source, replace the HDMI cable with
the shorter one.
an
.v
g Related Links
• "Connecting to a Computer for USB Video and Audio" p.22
w
w
w
• For OS X, select the USB Display icon in the Dock folder. If the icon does
not appear on the Dock, double-click USB Display in the Applications
folder.
If you select Exit from the USB Display icon menu on the Dock, USB
Display does not start automatically when you connect the USB cable.
• When using a computer running Windows 2000 under user authority, a
Windows error message is displayed and you may not be able to use the
software. If this occurs, try updating Windows to the latest version, restart
your computer, and try to connect again. Contact Epson for more details.
• For images projected with Windows Media Center, reduce the screen size
from full screen mode.
• For images projected from applications using Windows DirectX, turn off
DirectX functions.
• If the mouse cursor flickers, select Make the movement of the mouse
pointer smooth in the Epson USB Display Settings program on your
computer (this feature is not available for Windows 2000).
• Turn off the Transfer layered window setting in the Epson USB Display
Settings program on your computer.
• For projectors with a resolution of WUXGA (1920 × 1200), if you change
the computer resolution during projection, the performance and quality of
the video may decline.
g Related Links
• "Displaying From a Laptop" p.139
• "Displaying From a Mac Laptop" p.139
Displaying From a Laptop
If the message "No Signal" is displayed when projecting from a laptop, you
need to set up the laptop to display on an external monitor.
down the laptop's Fn key and press the key labeled with a monitor
a Hold
icon or CRT/LCD. (See your laptop manual for details.) Wait a few
seconds for an image to appear.
on the laptop's monitor and the projector, try pressing the
b Tosamedisplay
keys again.
same image is not displayed by the laptop and projector, check
c IfthetheWindows
Display utility to make sure the external monitor port is
enabled and extended desktop mode is disabled. (See your computer or
Windows manual for instructions.)
necessary, check your video card settings and set the multiple display
d Ifoption
to Clone or Mirror.
Displaying From a Mac Laptop
If the message "No Signal" is displayed when projecting from a Mac laptop,
you need to set up the laptop for mirrored display. (See your laptop manual
for details.)
ad
o
nl
ow
D
140
ed
Solving Image or Sound Problems
m
fro
• Press the [Auto] button on the remote control to optimize the image signal.
• Try adjusting the image position using the Position setting in the
projector's Signal menu.
• Press the [Aspect] button on the remote control to select a different image
aspect ratio.
• Change the Resolution setting in the projector's Signal menu according to
the signal for the connected equipment.
• If you zoomed into or out of the image using the [E-Zoom] buttons, press
the [Esc] button until the projector returns to a full display.
e
If only a partial computer image appears, try the following solutions:
.b
Solutions When Only a Partial Image Appears
re
or
g Related Links
• "Input Signal Settings - Signal Menu" p.103
nb
• Make sure the correct input signal is selected on the projector's Signal
menu.
• Make sure the computer's display resolution does not exceed the projector's
resolution and frequency limits. If necessary, select a different display
resolution for your computer. (See your computer manual for details.)
de
If the message "Not supported" is displayed, try the following solutions:
• Check your computer display settings to disable dual display and set the
resolution within the projector's limits. (See your computer manual for
details.)
• Check the resolution assigned to your presentation files to see if they are
created for a different resolution. (See your software help for details.)
• Make sure you selected the correct projection mode. You can select Front,
Front/Ceiling, Rear, or Rear/Ceiling as the Projection setting in the
projector's Extended menu.
an
.v
Solutions When "Not Supported" Message Appears
w
w
w
a Open the System Preferences utility and select Displays.
b Select the Display or Color LCD option, if necessary.
c Click the Arrange or Arrangement tab.
d Select Mirror Displays.
g Related Links
• "Input Signal Settings - Signal Menu" p.103
• "Projector Setup Settings - Extended Menu" p.107
• "Supported Monitor Display Resolutions" p.153
Solutions When the Image is not Rectangular
If the projected image is not evenly rectangular, try the following solutions:
• Place the projector directly in front of the center of the screen, facing it
squarely, if possible.
• If you adjusted the projector height using the projector feet, press the
keystone buttons on the projector to adjust the image shape.
• Turn on horizontal keystone slider in the projector's Settings menu. Then,
adjust the slider until the image is evenly rectangular.
s Settings > Keystone > H/V-Keystone > H-Keystone Adjuster
• Turn on automatic adjustment in the projector's Settings menu. The
projector automatically corrects the image every time you move the
projector.
s Settings > Keystone > H/V-Keystone > Auto V-Keystone
• Adjust the Quick Corner setting to correct the image shape.
s Settings > Keystone > Quick Corner
g Related Links
• "Auto V-Keystone" p.41
• "Correcting the Image Shape with the Keystone Buttons" p.42
• "Correcting the Image Shape with Quick Corner" p.43
o
nl
ow
D
ad
Solving Image or Sound Problems
ed
141
m
fro
•
•
•
•
•
g Related Links
• "Input Signal Settings - Signal Menu" p.103
• "Image Quality Settings - Image Menu" p.101
• "Supported Monitor Display Resolutions" p.153
a
e
•
• Adjust the image focus.
• Clean the projector lens.
.b
•
If the projected image is fuzzy or blurry, try the following solutions:
re
or
•
• Separated from the power cord to prevent interference
• Securely connected at both ends
• Not connected to an extension cable
• No longer than 3 meters
Check the settings on the projector's Signal menu to make sure they match
the video source.
If available for your video source, adjust the Deinteracing and Noise
Reduction settings in the Image menu.
Select a computer video resolution and refresh rate that are compatible with
the projector.
If you are projecting from a computer, press the [Auto] button on the
remote control to automatically adjust the Tracking and Sync. settings. If
the images are not adjusted correctly, manually adjust the Tracking and
Sync. settings in the projector's Signal menu.
Select Auto as the Resolution setting in the projector's Signal menu.
If you adjusted the image shape using the projector controls, try decreasing
the Sharpness setting in the projector's Image menu to improve image
quality.
If you connected an extension power cable, try projecting without it to see if
it caused interference in the signal.
If you are using the USB Display function, turn off the Transfer layered
window setting in the Epson USB Display Settings program on your
computer.
nb
• Check the cables connecting your computer or video source to the
projector. They should be:
Solutions When the Image is Fuzzy or Blurry
de
If the projected image contains electronic interference (noise) or static, try the
following solutions:
an
.v
w
w
w
Solutions When the Image Contains Noise or Static
To avoid condensation on the lens after bringing the projector in
from a cold environment, let the projector warm up to room
temperature before using it.
• Position the projector close enough to the screen.
• Position the projector so the keystone adjustment angle is not so wide that it
distorts the image.
• Turn on automatic adjustment in the projector's Settings menu.
s Settings > Keystone > H/V-Keystone > Auto V-Keystone
• Adjust the Sharpness setting in the projector's Image menu to improve
image quality.
• If you are projecting from a computer, press the [Auto] button on the
remote control to automatically adjust the tracking and sync. If any bands
or overall blurriness remain, display a uniformly patterned image on the
screen and manually adjust the Tracking and Sync. settings in the
projector's Signal menu.
• If you are projecting from a computer, use a lower resolution or select a
resolution that matches the projector's native resolution.
g Related Links
• "Input Signal Settings - Signal Menu" p.103
• "Image Quality Settings - Image Menu" p.101
• "Supported Monitor Display Resolutions" p.153
• "Focusing the Image Using the Focus Ring" p.48
• "Cleaning the Lens" p.123
ad
o
nl
ow
D
142
ed
Solving Image or Sound Problems
m
fro
g Related Links
• "Color Mode" p.53
• "Input Signal Settings - Signal Menu" p.103
• "Image Quality Settings - Image Menu" p.101
• "Projector Setup Settings - ECO Menu" p.115
e
• Position the projector close enough to the screen.
• If the image has been progressively darkening, you may need to replace the
projector lamp soon.
.b
At high altitudes or locations subject to high temperatures, the image
may become darker and you may not be able to adjust the Power
Consumption setting.
If there is no sound or the volume is too low or high, try the following
solutions:
re
or
a
nb
• Press the [Color Mode] button on the remote control to try different color
modes for the image and environment.
• Check your video source settings.
• Adjust the available settings on the projector's Image menu for the current
input source, such as Brightness, Contrast, Tint, Color Temp., and/or
Color Saturation.
• Make sure you selected the correct Input Signal or Video Signal setting in
the projector's Signal menu, if available for your image source.
s Signal > Advanced > Input Signal
s Signal > Advanced > Video Signal
• Make sure all the cables are securely connected to the projector and your
video device. If you connected long cables, try connecting shorter cables.
• If you are using the ECO as the Power Consumption setting, try selecting
Normal in the projector's ECO menu.
Solutions to Sound Problems
de
If the projected image is too dark or light, or the colors are incorrect, try the
following solutions:
an
.v
w
w
w
Solutions When the Image Brightness or Colors are
Incorrect
• Adjust the projector's volume settings.
• Press the [A/V Mute] button on the remote control to resume video and
audio if they were temporarily stopped.
• Check your computer or video source to make sure the volume is turned up
and the audio output is set for the correct source.
• Disconnect the audio cable, and then reconnect it.
• Check the audio cable connections between the projector and your video
source.
• If you do not hear sound from an HDMI source, set the connected device to
PCM output.
• Make sure any connected audio cables are labeled "No Resistance".
• If you are using the USB Display function, turn on the Output audio from
the projector setting in the Epson USB Display Settings program on your
computer.
• When you are connecting the projector to a Mac using an HDMI cable,
make sure your Mac supports audio through the HDMI port.
• If the volume for the computer is set to the minimum while the projector is
set to the maximum, the noise may be mixed. Turn up the computer's
volume and turn down the projector's volume. (When you use EasyMP
Network Projection, EasyMP Multi PC Projection, USB Display or Quick
Wireless Connection.)
g Related Links
• "Projector Connections" p.21
• "Projector Setup Settings - Extended Menu" p.107
• "Projector Setup Settings - ECO Menu" p.115
• "Controlling the Volume with the Volume Buttons" p.55
ad
o
nl
ow
D
143
ed
Solving Image or Sound Problems
m
fro
re
or
nb
de
e
.b
If any file names are longer than the display area or include unsupported
symbols, the file names are shortened or changed in PC Free. Shorten or
change the file name.
an
.v
w
w
w
Solutions When Image File Names are not Displayed
Correctly in PC Free
ad
o
nl
ow
D
144
ed
Solving Projector or Remote Control Operation Problems
m
fro
re
or
e
.b
• Make sure the power cord is securely connected to the projector and to a
working electrical outlet.
• The projector's buttons may be locked for security. Unlock the buttons in
the Control Panel Lock setting in the projector's Settings menu or use the
remote control to turn on the projector.
s Settings > Lock Setting > Control Panel Lock
• The power cord may be defective. Disconnect the cord and contact Epson
for help.
• If the projector's lamp turns off unexpectedly, it may have entered sleep
mode after a period of inactivity. Perform any operation to wake the
projector. To turn off sleep mode, select Off as the Sleep Mode setting in
the projector's ECO menu.
• If the projector's lamp turns off unexpectedly, the A/V mute timer may be
enabled. To turn off the A/V mute timer, select Off as the A/V Mute Timer
setting in the projector's ECO menu.
• If the projector's lamp turns off unexpectedly, the lens cover timer may be
enabled. To turn off the lens cover timer, select Off as the Lens Cover
Timer setting in the projector's ECO menu.
• If the projector's lamp turns off, the Status indicator is flashing, and the
Temp indicator is lit, the projector has overheated and turned off.
• If the power button on the remote control does not turn on the projector,
check its batteries and make sure the Remote Receiver setting in the
projector's Settings menu is turned on if available.
nb
If the projector does not turn on when you press the power button or it turns
off unexpectedly, try the following solutions:
de
Solutions to Projector Power or Shut-Off Problems
g Related Links
• "Projector Setup Settings - ECO Menu" p.115
• "Projector Indicators Status" p.135
• "Projector Feature Settings - Settings Menu" p.105
• "Unlocking the Projector's Buttons" p.79
an
.v
g Related Links
• "Solutions to Projector Power or Shut-Off Problems" p.144
• "Solutions to Problems with the Remote Control" p.144
• "Solutions to Password Problems" p.145
w
w
w
Check the solutions in these sections if you have problems operating the
projector or remote control.
Solutions to Problems with the Remote Control
If the projector does not respond to remote control commands, try the
following solutions:
• Check that the remote control batteries are installed correctly and have
power. If necessary, replace the batteries.
• Make sure you are operating the remote control within the reception angle
and range of the projector.
• Make sure the projector is not warming up or shutting down.
• Check to see if a button on the remote control is stuck down, causing it to
enter sleep mode. Release the button to wake the remote control up.
• Strong fluorescent lighting, direct sunlight, or infrared device signals may be
interfering with the projector's remote receivers. Dim the lights or move the
projector away from the sun or interfering equipment.
• Make sure at least one of the remote receivers are available in the Remote
Receiver setting in the projector's Settings menu.
• If the Remote Receiver setting is disabled, hold down the [Menu] button on
the remote control for at least 15 seconds to reset the setting to its default.
• If you assigned an ID number to the projector to operate multiple projectors
from the remote control, you may need to check or change the ID setting.
• If you lose the remote control, you can order another one from Epson.
g Related Links
• "Remote Control Operation" p.30
• "Projector Feature Settings - Settings Menu" p.105
• "Selecting the Projector You want to Operate" p.73
• "Replacing the Remote Control Batteries" p.132
ad
o
nl
ow
D
145
ed
Solving Projector or Remote Control Operation Problems
m
fro
re
or
nb
e
.b
• You may have turned on password protection without first setting a
password. Try entering 0000 using the remote control.
• If you have entered an incorrect password too many times and see a
message displaying a request code, write down the code and contact Epson
for help. Provide the request code and proof of ownership for assistance in
unlocking the projector.
• If you lose the remote control you cannot enter a password. Order a new
one from Epson.
de
If you cannot enter or remember a password, try the following solutions:
an
.v
w
w
w
Solutions to Password Problems
ad
o
nl
ow
D
146
ed
Solving Network Problems
m
fro
Solutions When Network Alert E-Mails are not
Received
If you do not receive an e-mail alerting you to problems with a projector over
the network, try the following solutions:
• Make sure the projector is turned on and connected to the network
correctly. (If an error shut down the projector, it cannot send an e-mail.)
• Make sure you set up the projector e-mail alert settings correctly on the
projector's network Mail menu or in the network software.
e
g Related Links
• "Network Menu - Basic Menu" p.109
.b
a
The user ID and password are case sensitive.
re
or
• For the user ID, enter EPSONWEB. (You cannot change the user ID.)
• For the password, enter the password set in the projector's network Basic
menu. The default password is admin.
• Make sure you have access to the network the projector is on.
nb
If you are unable to access the projector through a Web browser, make sure
you are using the correct ID and password.
de
Solutions When You Cannot Access the Projector
Through the Web
• Set the Standby Mode setting to Communication On in the projector's
ECO menu so the network software can monitor the projector in standby
mode.
• Make sure your electrical outlet or power source is functioning correctly.
an
.v
g Related Links
• "Solutions When You Cannot Access the Projector Through the Web" p.146
• "Solutions When Network Alert E-Mails are not Received" p.146
• "Solutions When the Image Contains Static During Network Projection"
p.146
w
w
w
Check the solutions in these sections if you have problems using the projector
on a network.
g Related Links
• "Network Menu - Mail Menu" p.112
Solutions When the Image Contains Static During
Network Projection
If the projected image contains static during network projection, try the
following solutions:
• Check for any obstacles between the access point, the computer, the mobile
device, and the projector, and change their positions to improve
communication.
• Make sure that the access point, the computer, the mobile device and the
projector are not too far apart. Move them closer together and try to
connect again.
• If the wireless connection is slow or your projected image contains noise,
check for interference from other equipment, such as a Bluetooth device or
microwave. Move the interfering device farther away or expand your
wireless bandwidth.
• Reduce the number of connected devices if the connection speed declines.
ed
ad
o
nl
ow
D
m
fro
e
g Related Links
• "Optional Accessories and Replacement Parts" p.148
• "Screen Size and Projection Distance" p.149
• "Supported Monitor Display Resolutions" p.153
• "Projector Specifications" p.155
• "External Dimensions" p.157
• "USB Display System Requirements" p.159
• "List of Safety Symbols (corresponding to IEC60950-1 A2)" p.160
• "Glossary" p.162
• "Notices" p.164
.b
Check these sections for the technical specifications and important notices about your projector.
re
or
nb
de
an
.v
w
w
w
Appendix
o
nl
ow
D
ad
Optional Accessories and Replacement Parts
ed
148
m
fro
70" portable screen ELPSC23
80" portable screen ELPSC24
90" portable screen ELPSC25
Portable roll-type screens. (aspect ratio 16:10)
64" portable screen ELPSC31
Portable magnetic screens. (aspect ratio 4:3)
50" portable screen ELPSC32
A compact screen that can be carried easily. (aspect ratio 4:3)
Multi Aspect Screen ELPSC26
Portable multi-aspect screen.
e
60" portable screen ELPSC27
80" portable screen ELPSC28
100" portable screen ELPSC29
Portable roll-type screens. (aspect ratio 4:3)
.b
Soft carrying case ELPKS63 (EB-W32/EB-W31/EB-X36/EB-X31/EBS31/EB-W04/EB-X04/EB-S04/EB-W130/EB-X130/EB-S130/EB-X350/EBX300/EB-S300)
Soft carrying case ELPKS67 (EB-U32/EB-U04/EB-U130)
Use this to carry the projector by hand.
re
or
Document Camera ELPDC06/ELPDC11/ELPDC12/ELPDC20
Use when projecting image such as books, OHP documents, or slides.
nb
Interactive Unit ELPIU01
Use when operating the computer screen on the projection surface.
de
Optional Accessories
Computer cable ELPKC02 (1.8 m - for mini D-sub 15-pin/mini D-Sub
15pin)
Computer cable ELPKC09 (3 m - for mini D-sub 15-pin/mini D-Sub
15pin)
Computer cable ELPKC10 (20 m - for mini D-sub 15-pin/mini D-Sub
15pin)
Use when connecting to the computer port.
an
.v
g Related Links
• "Optional Accessories" p.148
• "Replacement Parts" p.148
w
w
w
The following optional accessories and replacement parts are available. Please
purchase these products as and when needed. The following list of optional
accessories and replacement parts is current as of: March 2015. Details of
accessories are subject to change without notice and availability may vary
depending on the country of purchase.
Component video cable ELPKC19 (3 m - for mini D-Sub 15-pin/RCA male
x 3)
Use this to connect a component video source.
Wireless LAN module ELPAP10
Use this to project images from a computer via a wireless communication.
Quick Wireless Connection USB Key ELPAP09
Use when you want to quickly establish one-to-one connection between
the projector and a component with Windows installed.
Ceiling pipe (450 mm) ELPFP13
Ceiling pipe (700 mm) ELPFP14
Use when installing the projector on a high ceiling.
Ceiling mount ELPMB23
Use when installing the projector on a ceiling.
a
Special expertise is required to suspend the projector from a ceiling.
Contact Epson for help.
Replacement Parts
Lamp unit ELPLP88
Use as a replacement for used lamps.
Air filter ELPAF32
Use as a replacement for used air filters.
o
nl
ow
D
ad
Screen Size and Projection Distance
ed
149
m
fro
A
B
Minimum (Wide) to
Maximum (Tele)
Minimum (Wide)
re
or
nb
de
4:3 screen size
an
.v
w
w
w
Check the table here to determine how far to place the projector from the
screen based on the size of the projected image.
177 - 240
-10
70"
142 × 107
207 - 280
-12
80"
163 × 122
237 - 321
-13
100"
203 × 152
297 - 401
-17
150"
305 × 229
446 - 603
-25
200"
406 × 305
595 - 805
-33
A
B
Minimum (Wide) to
Maximum (Tele)
Minimum (Wide)
16:9 screen size
A Projection distance (cm)
B Distance from the center of the lens to the base of the screen (or to the top of
the screen, if suspended from a ceiling) (cm)
C Center of lens
28"
62 × 35
89 - 121
1
30"
66 × 37
96 - 130
1
50"
111 × 62
161 - 218
1
60"
133 × 75
193 - 262
2
70"
155 × 87
226 - 306
2
80"
177 × 100
258 - 349
2
100"
221 × 125
323 - 437
3
150"
332 × 187
486 - 657
4
200"
443 × 249
649 - 877
5
XGA (EB-X31/EB-X04/EB-X130/EB-X350/EB-X300)
SVGA (EB-S31/EB-S04/EB-S130/EB-S300)
4:3 screen size
e
122 × 91
.b
60"
A
B
Minimum (Wide) to
Maximum (Tele)
Minimum (Wide)
30"
61 × 46
88 - 119
-5
50"
102 × 76
147 - 200
-8
4:3 screen size
A
B
Minimum (Wide) to
Maximum (Tele)
30"
61 × 46
89 - 107
-5
40"
81 × 61
119 - 143
-7
o
nl
ow
D
ad
Screen Size and Projection Distance
ed
150
m
fro
B
XGA (EB-X36)
150 - 180
-8
60"
122 × 91
180 - 217
-10
80"
163 × 122
241 - 290
-14
100"
203 × 152
302 - 363
-17
150"
305 × 229
454 - 546
-25
200"
406 × 305
607 - 729
-34
250"
508 × 381
759 - 912
-42
300"
610 × 457
912 - 1095
-51
A
B
Minimum (Wide) to
Maximum (Tele)
28"
62 × 35
90 - 109
1
30"
66 × 37
97 - 117
1
40"
89 × 50
130 - 156
1
50"
111 × 62
163 - 196
1
60"
133 × 75
196 - 236
1
80"
177 × 100
263 - 316
2
100"
221 × 125
329 - 396
2
150"
332 × 187
495 - 595
3
200"
443 × 249
661 - 794
5
250"
553 × 311
827 - 994
6
275"
609 × 342
910 - 1093
6
B
Minimum (Wide) to
Maximum (Tele)
e
102 × 76
A
.b
50"
re
or
4:3 screen size
nb
de
Minimum (Wide) to
Maximum (Tele)
16:9 screen size
an
.v
A
w
w
w
4:3 screen size
30"
61 × 46
84 - 101
-5
40"
81 × 61
113 - 136
-6
50"
102 × 76
142 - 171
-8
60"
122 × 91
171 - 206
-10
80"
163 × 122
229 - 275
-13
100"
203 × 152
287 - 345
-16
150"
305 × 229
432 - 519
-24
200"
406 × 305
577 - 693
-32
250"
508 × 381
722 - 867
-40
300"
610 × 457
867 - 1041
-48
A
B
16:9 screen size
Minimum (Wide) to
Maximum (Tele)
28"
62 × 35
85 - 103
1
30"
66 × 37
91 - 110
1
40"
89 × 50
123 - 148
1
50"
111 × 62
155 - 186
2
60"
133 × 75
186 - 224
2
80"
177 × 100
249 - 300
3
100"
221 × 125
313 - 376
3
150"
332 × 187
471 - 566
5
200"
443 × 249
629 - 755
7
250"
553 × 311
787 - 945
9
275"
609 × 342
866 - 1040
10
o
nl
ow
D
ad
Screen Size and Projection Distance
ed
151
m
fro
90 - 109
-4
30"
61 × 46
94 - 113
-4
40"
81 × 61
126 - 152
-5
50"
102 × 76
158 - 190
-7
60"
122 × 91
190 - 229
-8
70"
142 × 107
222 - 267
-10
80"
163 × 122
255 - 306
-11
100"
203 × 152
319 - 383
-14
150"
305 × 229
480 - 577
-20
200"
406 × 305
641 - 770
-27
280"
569 × 427
898 - 1079
-38
A
B
Minimum (Wide) to
Maximum (Tele)
32"
71 × 40
91 - 109
-2
35"
77 × 44
99 - 120
-2
40"
89 × 50
114 - 137
-2
50"
111 × 62
143 - 172
-3
60"
133 × 75
172 - 208
-3
70"
155 × 87
202 - 243
-4
80"
177 × 100
231 - 278
-4
100"
221 × 125
289 - 348
-5
150"
332 × 187
435 - 523
-8
200"
443 × 249
582 - 699
-11
686 × 386
e
59 × 44
Minimum (Wide) to
Maximum (Tele)
.b
310"
29"
B
re
or
B
Minimum (Wide) to
Maximum (Tele)
16:9 screen size
nb
A
A
de
4:3 screen size
16:9 screen size
an
.v
w
w
w
WXGA (EB-W32/EB-W31/EB-W04/EB-W130)
16:10 screen size
903 - 1084
-17
A
B
Minimum (Wide) to
Maximum (Tele)
33"
71 × 44
91 - 110
-4
35"
75 × 47
97 - 117
-4
40"
86 × 54
111 - 134
-5
50"
108 × 67
139 - 168
-6
60"
129 × 81
168 - 202
-7
80"
172 × 108
225 - 270
-10
100"
215 × 135
281 - 338
-12
150"
323 × 202
424 - 509
-18
200"
431 × 269
566 - 680
-24
320"
689 × 431
907 - 1089
-39
A
B
WUXGA (EB-U32/EB-U04/EB-U130)
4:3 screen size
Minimum (Wide) to
Maximum (Tele)
27"
55 × 41
89 - 109
-4
30"
61 × 46
99 - 121
-4
40"
81 × 61
133 - 163
-6
50"
102 × 76
168 - 205
-7
60"
122 × 91
202 - 246
-8
70"
142 × 107
236 - 288
-10
o
nl
ow
D
ad
Screen Size and Projection Distance
ed
152
m
fro
A
270 - 329
-11
40"
86 × 54
118 - 144
-5
100"
203 × 152
339 - 412
-14
50"
108 × 67
148 - 180
-6
150"
305 × 229
509 - 620
-21
60"
129 × 81
178 - 217
-7
200"
406 × 305
680 - 828
-28
80"
172 × 108
238 - 291
-10
260"
528 × 396
885 - 1078
-36
100"
215 × 135
299 - 364
-12
150"
323 × 202
450 - 548
-18
200"
431 × 269
601 - 731
-24
300"
646 × 404
902 - 1098
-37
B
Minimum (Wide) to
Maximum (Tele)
30"
66 × 37
90 - 110
-2
35"
77 × 44
105 - 129
-2
40"
89 × 50
121 - 148
-2
50"
111 × 62
152 - 185
-3
60"
133 × 75
183 - 223
-3
70"
155 × 87
214 - 261
-4
80"
177 × 100
245 - 299
-5
100"
221 × 125
307 - 374
-6
150"
332 × 187
462 - 563
-8
200"
443 × 249
617 - 752
-11
290"
642 × 361
897 - 1091
-16
A
B
16:10 screen size
Minimum (Wide) to
Maximum (Tele)
30"
65 × 40
87 - 107
-4
35"
75 × 47
102 - 125
-4
e
163 × 122
A
Minimum (Wide) to
Maximum (Tele)
.b
80"
16:9 screen size
B
re
or
nb
Minimum (Wide) to
Maximum (Tele)
A
de
16:10 screen size
B
an
.v
w
w
w
4:3 screen size
o
nl
ow
D
ad
Supported Monitor Display Resolutions
ed
153
m
fro
VGA
Component Signals (Analog RGB)
For EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EB-U04/EB-W04/EBX04/EB-U130/EB-W130/EB-X130/EB-X350/EB-X300
an
.v
Signal
de
w
w
w
The table here lists the compatible refresh rate and resolution for each
compatible video display format.
Resolution (dots)
60/72/75/85
640 × 480
SVGA
60/72/75/85
800 × 600
XGA
60/70/75/85
1024 × 768
WXGA
60
1280 × 768
re
or
nb
Refresh rate (Hz)
e
.b
Signal
Refresh rate (Hz)
Resolution (dots)
60
1366 × 768
VGA
60/72/75/85
640 × 480
60/75
1280 × 800
SVGA
60/72/75/85
800 × 600
WXGA+
60
1440 × 900
XGA
60/70/75/85
1024 × 768
SXGA
70/75
1152 × 864
WXGA
60
1280 × 768
60
1280 × 960
60
1366 × 768
60
1280 × 1024
60/75/85
1280 × 800
60
1400 × 1050
WXGA+
60/75/85
1440 × 900
WXGA++
60
1600 × 900
SXGA
70/75/85
1152 × 864
60/75/85
1280 × 960
60/75/85
1280 × 1024
SXGA+
60/75
1400 × 1050
WSXGA+ *
60
1680 × 1050
UXGA
60
1600 × 1200
WUXGA **
60
1920 × 1200
* WSXGA+ is available only for EB-U32/EB-W32/EB-W31/EB-U04/EBW04/EB-U130/EB-W130 and compatible only when Wide is selected as the
Resolution setting in the projector's Signal menu.
** WUXGA is available only for EB-U32/EB-U04/EB-U130.
For EB-S31/EB-S04/EB-S130/EB-S300
SXGA+
Even when signals other than those mentioned above are input, it is likely that
the image can be projected. However, not all functions may be supported.
Component Video
Signal
Refresh rate (Hz)
Resolution (dots)
SDTV (480i/480p)
60
720 × 480
SDTV (576i/576p)
50
720 × 576
HDTV (720p)
50/60
1280 × 720
HDTV (1080i)
50/60
1920 × 1080
Signal
Refresh rate (Hz)
Resolution (dots)
TV (NTSC)
60
720 × 480
TV (SECAM)
50
720 × 576
TV (PAL)
50/60
720 × 576
Composite Video
o
nl
ow
D
ad
Supported Monitor Display Resolutions
ed
154
m
fro
w
w
w
MHL Input Signal (EB-U32/EB-W32/EB-W31/EB-U04/EB-U130)
Refresh rate (Hz)
Resolution (dots)
Signal
Refresh rate (Hz)
Resolution (dots)
VGA
60
640 × 480
VGA
60
640 × 480
SVGA
60
800 × 600
SDTV (480i/480p)
60
720 × 480
XGA
60
1024 × 768
SDTV (576i/576p)
50
720 × 576
WXGA
60
1280 × 800
HDTV (720p)
50/60
1280 × 720
60
1366 × 768
HDTV (1080i)
50/60
1920 × 1080
WXGA+
60
1440 × 900
HDTV (1080p)
24/30
1920 × 1080
WXGA++ *
60
1600 × 900
UXGA *
60
1600 × 1200
WSXGA+ **
60
1680 × 1050
WUXGA ***
60
1920 × 1200
SXGA
60
1280 × 960
60
1280 × 1024
SXGA+
60
1400 × 1050
SDTV (480i/480p)
60
720 × 480
SDTV (576i/576p)
50
720 × 576
HDTV (720p)
50/60
1280 × 720
HDTV (1080i)
50/60
1920 × 1080
HDTV (1080p)
24/30/50/60
1920 × 1080
** Available only for EB-U32/EB-W32/EB-W31/EB-U04/EB-W04/EBU130/EB-W130.
*** Available only for EB-U32/EB-U04/EB-U130.
e
* Available only for EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EB-U04/EBW04/EB-X04/EB-U130/EB-W130/EB-X130/EB-X350/EB-X300.
re
or
Signal
.b
nb
de
an
.v
HDMI Input Signal
o
nl
ow
D
ad
Projector Specifications
ed
155
m
fro
w
w
w
Display method
Poly-silicon TFT active matrix
Resolution
EB-S31/EB-S04/EB-S130/EB-S300:
480,000 pixels
SVGA (800 (W) × 600 (H) dots) × 3
EB-X36/EB-X31/EB-X04/EB-X130/EB-X350/EBX300:
786,432 pixels
XGA (1024 (W) × 768 (H) dots) × 3
EB-W32/EB-W31/EB-W04/EB-W130:
1024,000 pixels
WXGA (1280 (W) × 800 (H) dots) × 3
EB-U32/EB-U04/EB-U130:
2,304,000 pixels
WUXGA (1920 (W) × 1200 (H) dots) × 3
Focus adjustment
Manual
Lamp life
• Normal Power Consumption mode: Up to 5000 hours
• ECO Power Consumption mode: Up to 10000 hours
Max. audio output
EB-W04/EB-X04/EB-S04/EB-W130/EB-X130/EBS130/EB-X300/EB-S300:
1W
EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EBS31/EB-U04/EB-U130/EB-X350:
2W
Speaker
1
Power supply
100-240V AC±10% 50/60Hz 2.9 - 1.3 A
Power
100 to 120 V
consumpt area
ion
Operating: 291 W
Standby power consumption (Communication On): 2.3
W
Standby power consumption (Communication Off): 0.2
W
220 to 240 V
area
Operating: 277 W
Standby power consumption (Communication On): 2.4
W
Standby power consumption (Communication Off):
0.26 W
e
EB-X31/EB-S31/EB-X04/EB-S04/EB-X130/EBS130/EB-X350/EB-X300/EB-S300:
0.55"
EB-X36:
0.63"
EB-W32/EB-W31/EB-W04/EB-W130:
0.59"
EB-U32/EB-U04/EB-U130:
0.67"
UHE lamp, 200 W Model No.: ELPLP88
.b
LCD panel size
Lamp
re
or
EB-W32/EB-W31/EB-X36/EB-X31/EB-S31/EBW04/EB-X04/EB-S04/EB-W130/EB-X130/EBS130/EB-X350/EB-X300/EB-S300:
297 (W) × 77 (H) × 234 (D) mm (not including raised
section)
EB-U32/EB-U04/EB-U130:
297 (W) × 77 (H) × 244 (D) mm (not including raised
section)
EB-S31/EB-S04/EB-S130/EB-S300:
1.0 - 1.35 (Digital Zoom)
EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EBU04/EB-W04/EB-X04/EB-U130/EB-W130/EBX130/EB-X350/EB-X300:
1 - 1.2
nb
Dimensions
Zoom adjustment
de
EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EB-S31/EBU04/EB-W04/EB-X04/EB-S04/EB-U130/EB-W130/EBX130/EB-S130/EB-X350/EB-X300/EB-S300
an
.v
Product name
Operating altitude
Altitude 0 to 3,000 m
Operating temperature
+5 to +35°C (No condensation) (Altitude 0 to 2,286 m)
+5 to +30°C (No condensation) (Altitude 2,287 to 3,000
m)
Storage temperature
-10 to +60°C (No condensation)
o
nl
ow
D
ad
Projector Specifications
ed
156
m
fro
Computer port
1
Mini D-Sub15-pin (female)
Video port
1
RCA pin jack
S-Video port
1
(EB-W32/EB-W31/EBX36/EB-X31/EB-S31/EBW04/EB-X04/EB-S04/EBW130/EB-X130/EBS130/EB-X350/EBX300/EB-S30)
Mini DIN 4-pin
Audio port
RCA pin jack x 2 (L-R)
1
e
Connector Specifications
.b
g Related Links
• "Connector Specifications" p.156
re
or
If you use the projector tilted at an angle of more than 30˚ it could be
damaged and cause an accident.
nb
Angle of tilt
HDMI (Audio is only supported by
PCM)
de
This product is also designed for IT power distribution system with phase-tophase voltage 230V.
HDMI port
1
(EB-X36/EB-X31/EBS31/EB-W04/EB-X04/EBS04/EB-W130/EBX130/EB-S130/EBX350/EB-X300/EB-S30)
HDMI/MHL port
(EB-W32/EB-W31)
HDMI1, HDMI2/MHL
port
(EB-U32/EB-U04/EBU130)
an
.v
EB-W32/EB-W31/EB-X36/EB-X31/EB-S31/EBW04/EB-X04/EB-S04/EB-W130/EB-X130/EBS130/EB-X350/EB-X300/EB-S300:
Approx. 2.4 kg
EB-U32/EB-U04/EB-U130:
Approx. 2.6 kg
w
w
w
Mass
USB-A port
1
USB connector (Type A)
USB-B port
1
USB connector (Type B)
a
• USB-A and USB-B port supports USB 2.0. However, USB ports are
not guaranteed to operate all devices that support USB.
• USB-B port is not support USB 1.1.
ad
o
nl
ow
D
157
ed
External Dimensions
m
fro
re
or
nb
de
an
.v
w
w
w
EB-U32/EB-U04/EB-U130
e
.b
A Center of lens
B Distance from center of lens to suspension bracket fixing point
ad
o
nl
ow
D
158
ed
External Dimensions
m
fro
re
or
nb
de
an
.v
w
w
w
EB-W32/EB-W31/EB-X36/EB-X31/EB-S31/EB-W04/EB-X04/EB-S04/EBW130/EB-X130/EB-S130/EB-X350/EB-X300/EB-S300
e
.b
The unit in these illustrations is mm.
o
nl
ow
D
ad
USB Display System Requirements
ed
159
m
fro
Windows 8
• Windows 8 (32- and 64-bit)
• Windows 8 Pro (32- and 64bit)
• Windows 8 Enterprise (32and 64-bit)
e
Windows 7
• Ultimate (32- and 64-bit)
• Enterprise (32- and 64-bit)
• Professional (32- and 64-bit)
• Home Premium (32- and 64bit)
• Home Basic (32-bit)
• Starter (32-bit)
.b
Windows Vista
• Ultimate (32-bit)
• Enterprise (32-bit)
• Business (32-bit)
• Home Premium (32-bit)
• Home Basic (32-bit)
re
or
Windows XP
• Professional (32-bit)
• Home Edition (32-bit)
• Tablet PC Edition (32-bit)
Windows 8.1
• Windows 8.1 (32- and 64-bit)
• Windows 8.1 Pro (32- and 64bit)
• Windows 8.1 Enterprise (32and 64-bit)
Mac
OS X
• Mac OS X 10.5.x (32-bit)
• Mac OS X 10.6.x (32- and
64-bit)
• OS X 10.7.x (32- and 64bit)
• OS X 10.8.x (64-bit)
• OS X 10.9.x (64-bit)
• OS X 10.10.x (64-bit)
Mac
nb
Operating system Windows 2000 (Service Pack 4
only)
Windows
de
Windows
Requirement
an
.v
Requirement
w
w
w
To use the projector's Epson USB Display software, your computer must meet
the following system requirements.
CPU
Mobile Pentium III 1.2 GHz or
faster
(Pentium M 1.6 GHz or faster
recommended)
Power PC G4 1 GHz or faster
(Core Duo 1.83 GHz or faster
recommended)
Memory
256 MB or more
512 MB or more
(512 MB or more recommended)
Hard disk space
20 MB or more
20 MB or more
Display
Resolution between 640 × 480
and 1920 × 1200
16-bit color or greater
Resolution between 640 × 480
and 1920 × 1200
16-bit color or greater
ad
o
nl
ow
D
160
ed
List of Safety Symbols (corresponding to IEC60950-1 A2)
m
fro
w
w
w
No. Symbol mark
Approved
standards
No. Symbol mark
Approved
standards
Description
I
—
A
IEC60417
No.5007
"ON" (power)
To indicate connection to the mains.
J
IEC60417
No.5001B
B
IEC60417
No.5008
"OFF" (power)
To indicate disconnection from the
mains.
Battery, general
On battery powered equipment. To
identify a device for instance a cover
for the battery compartment, or the
connector terminals.
K
IEC60417
No.5002
C
IEC60417
No.5009
Stand-by
To identify the switch or switch
position by means of which part of the
equipment is switched on in order to
bring it into the stand-by condition.
Positioning of cell
To identify the battery holder itself
and to identify the positioning of the
cell(s) inside the battery holder.
L
—
The same as No.11.
M
IEC60417
No.5019
Protective earth
To identify any terminal which is
intended for connection to an external
conductor for protection against
electric shock in case of a fault, or the
terminal of a protective earth
electrode.
N
IEC60417
No.5017
Earth
To identify an earth (ground) terminal
in cases where neither the symbol
No.13 is explicitly required.
O
IEC60417
No.5032
Alternating current
To indicate on the rating plate that the
equipment is suitable for alternating
current only; to identify relevant
terminals.
P
IEC60417
No.5031
Direct current
To indicate on the rating plate that the
equipment is suitable for direct
current only; to identify relevant
terminals.
Caution, hot surface
To indicate that the marked item can
be hot and should not be touched
without taking care.
IEC60417
No.6042
ISO3864-B3.6
Caution, risk of electric shock
To identify equipment that has risk of
electric shock.
G
IEC60417
No.5957
For indoor use only
To identify electrical equipment
designed primarily for indoor use.
H
IEC60417
No.5926
Polarity of d.c. power connector
To identify the positive and negative
connections (the polarity) on a piece
of equipment to which a d.c. power
supply may be connected.
F
e
IEC60417
No.5041
The same as No.8.
.b
E
re
or
Caution
To identify general caution when
using the product.
nb
ISO7000
No.0434B,
IEC3864-B3.1
Description
de
D
an
.v
The following table lists the meaning of the safety symbols labeled on the
equipment.
ad
o
nl
ow
D
161
ed
List of Safety Symbols (corresponding to IEC60950-1 A2)
m
fro
R
ISO 3864
General prohibition
To identify actions or operations that
are prohibited.
S
ISO 3864
Contact prohibition
To indicate injury that could occur
due to touching a specific part of the
equipment.
T
—
Never look into the optical lens while
the projector is on.
U
—
To indicate that the marked item don’t
place anything on projector.
V
ISO3864
IEC60825-1
Caution, laser radiation
To indicate the equipment has a laser
radiation part.
W
ISO 3864
Disassembly prohibition
To indicate a risk of injury, such as
electric shock, if the equipment is
disassembled.
e
Class II equipment
To identify equipment meeting the
safety requirements specified for Class
II equipment according to IEC 61140.
.b
IEC60417
No.5172
re
or
Q
nb
Description
de
Approved
standards
an
.v
w
w
w
No. Symbol mark
o
nl
ow
D
ad
Glossary
ed
162
m
fro
Contrast
The relative brightness of the light and dark areas of an image
can be increased or decreased to make text and graphics stand
out more clearly, or to make them appear softer. Adjusting this
particular property of an image is called contrast adjustment.
DHCP
An abbreviation of Dynamic Host Configuration Protocol, this
protocol automatically assigns an IP address to equipment
connected to a network.
Gateway Address
This is a server (router) for communicating across a network
(subnet) divided according to subnet mask.
Infrastructure
mode
A method for wireless LAN connection in which devices
communicate through access points.
Interlace
Transmits information needed to create one screen by sending
every other line, starting from the top of the image and working
down to the bottom.
Images are more likely to flicker because one frame is displayed
every other line.
IP Address
A number to identify a computer connected to a network.
MHL
An abbreviation for Mobile High-definition Link, a standard
for connection interfaces aimed at mobile devices such as
smartphones and tablets.
Images can be transferred at high quality and at high speeds
without compressing the digital signal, and also charges
connected devices.
Progressive
Projects information to create one screen at a time, displaying
the image for one frame.
Even though the number of scan lines is the same, the amount
of flicker in images decreases because the volume of
information has doubled compared with an interlace system.
e
A method that combines the video signal into a luminance
component and a color component for transmission down a
single cable.
An abbreviation for High-Definition Television that refers to
high-definition systems which satisfy the following conditions:
• Vertical resolution of 720p or 1080i or greater (p =
Progressive, i = Interlace)
• Screen aspect ratio of 16:9
.b
Composite Video
HDTV
re
or
Component Video A method that separates the video signal into a luminance
component (Y), and a blue minus luminance (Cb or Pb) and a
red minus luminance (Cr or Pr).
HDCP is an abbreviation for High-bandwidth Digital Content
Protection.
It is used to prevent illegal copying and protect copyrights by
encrypting digital signals sent over DVI and HDMI ports.
Because the HDMI port on this projector supports HDCP, it
can project digital images protected by HDCP technology.
However, the projector may not be able to project images
protected with updated or revised versions of HDCP
encryption.
nb
The ratio between an image's length and its height.
Screens with a horizontal:vertical ratio of 16:9, such as HDTV
screens, are known as wide screens.
SDTV and general computer displays have an aspect ratio of
4:3.
HDCP
de
Aspect Ratio
AMX Device Discovery is a technology developed by AMX to
facilitate AMX control systems for easy operation of the target
equipment.
Epson have implemented this protocol technology, and have
provided a setting to enable the protocol function (ON).
See the AMX Web site for more details.
URL http://www.amx.com/
an
.v
AMX Device
Discovery
w
w
w
This section briefly explains the difficult terms that are not explained in the
text of this guide. For details, refer to other commercially available
publications.
o
nl
ow
D
ad
Glossary
ed
163
m
fro
sRGB
An international standard for color intervals that was
formulated so that colors that are reproduced by video
equipment can be handled easily by computer operating
systems (OS) and the Internet. If the connected source has an
sRGB mode, set both the projector and the connected signal
source to sRGB.
SSID
SSID is identification data for connecting to another device on
a wireless LAN. Wireless communication is possible between
devices with the same SSID.
Subnet Mask
This is a numerical value that defines the number of bits used
for the network address on a divided network (subnet) from the
IP address.
SVGA
A screen size standard with a resolution of 800 (horizontal) ×
600 (vertical) dots.
SXGA
A screen size standard with a resolution of 1,280 (horizontal) ×
1,024 (vertical) dots.
Sync.
The signals output from computers have a specific frequency.
If the projector frequency does not match this frequency, the
resulting images are not of a good quality.
The process of matching the phases of these signals (the relative
position of the crests and the troughs in the signal) is called
Synchronization.
If the signals are not synchronized, flickering, blurriness, and
horizontal interference occur.
VGA
A screen size standard with a resolution of 640 (horizontal) ×
480 (vertical) dots.
XGA
A screen size standard with a resolution of 1,024 (horizontal) ×
768 (vertical) dots.
WXGA
A screen size standard with a resolution of 1,280 (horizontal) ×
768 (vertical) dots.
WUXGA
A screen size standard with a resolution of 1,920 (horizontal) ×
1,200 (vertical) dots.
e
An abbreviation for Simple Network Management Protocol,
which is the protocol for monitoring and controlling devices
such as routers and computers connected to a TCP/IP network.
This is the IP address for the destination computer used for
error notification in SNMP.
.b
SNMP
Trap IP Address
re
or
An abbreviation for Standard Definition Television that refers
to standard television systems which do not satisfy the
conditions for HDTV High-Definition Television.
The signals output from computers have a specific frequency.
If the projector frequency does not match this frequency, the
resulting images are not of a good quality.
The process of matching the frequency of these signals (the
number of crests in the signal) is called Tracking.
If Tracking is not carried out correctly, wide vertical stripes
appear in the signal.
nb
SDTV
Tracking
de
The light-emitting element of a display maintains the same
luminosity and color for an extremely short time.
Because of this, the image must be scanned many times per
second to refresh the light-emitting element.
The number of refresh operations per second is called the
Refresh rate and is expressed in hertz (Hz).
an
.v
w
w
w
Refresh Rate
o
nl
ow
D
ad
Notices
ed
164
m
fro
Declare under sole responsibility that the product identified herein, complies
with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each
product marketed, is identical to the representative unit tested and found to
be compliant with the standards. Records maintained continue to reflect the
equipment being produced can be expected to be within the variation
accepted, due to quantity production and testing on a statistical basis as
required by 47CFR 2.909. Operation is subject to the following two
conditions : (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Trade Name: EPSON
Type of Product: LCD Projector
FCC Compliance Statement For United States Users
e
Tel: 562-981-3840
.b
Located at: 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806
re
or
We: Epson America, Inc.
nb
DECLARATION of CONFORMITY
According to 47CFR, Part 2 and 15
Class B Personal Computers and Peripherals; and/or
CPU Boards and Power Supplies used with Class B Personal Computers
de
FCC Compliance Statement
Model:
H716C/H717C/H718C/H719C/H720C/H721C/H722C/H723C/H730C/H763
C/H764C
an
.v
g Related Links
• "FCC Compliance Statement" p.164
• "Indication of the manufacturer and the importer in accordance with
requirements of EU directive" p.165
• "Restriction of Use" p.165
• "Operating System References" p.165
• "Trademarks" p.165
• "Copyright Notice" p.166
• "Copyright Attribution" p.166
w
w
w
Check these sections for important notices about your projector.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio and television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING
The connection of a non-shielded equipment interface cable to this
equipment will invalidate the FCC Certification or Declaration of this device
and may cause interference levels which exceed the limits established by the
FCC for this equipment. It is the responsibility of the user to obtain and use a
shielded equipment interface cable with this device. If this equipment has
more than one interface connector, do not leave cables connected to unused
interfaces. Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
o
nl
ow
D
ad
Notices
ed
165
m
fro
w
w
w
• Microsoft® Windows® 7 operating system
• Microsoft® Windows® 8 operating system
• Microsoft® Windows® 8.1 operating system
re
or
nb
de
an
.v
Indication of the manufacturer and the importer in
accordance with requirements of EU directive
e
.b
Manufacturer: SEIKO EPSON CORPORATION
Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan
Telephone: 81-266-52-3131
http://www.epson.com/
Importer: EPSON EUROPE B.V.
Address: Atlas Arena, Asia Building, Hoogoorddreef 5,1101 BA Amsterdam
Zuidoost
The Netherlands
Telephone: 31-20-314-5000
http://www.epson.com/europe.html
Restriction of Use
When this product is used for applications requiring high reliability/safety
such as transportation devices related to aviation, rail, marine, automotive
etc.; disaster prevention devices; various safety devices etc; or
functional/precision devices etc, you should use this product only after giving
consideration to including fail-safes and redundancies into your design to
maintain safety and total system reliability. Because this product was not
intended for use in applications requiring extremely high reliability/safety
such as aerospace equipment, main communication equipment, nuclear
power control equipment, or medical equipment related to direct medical care
etc, please make your own judgment on this product’s suitability after a full
evaluation.
Operating System References
• Microsoft Windows 2000 operating system
• Microsoft® Windows® XP operating system
• Microsoft® Windows Vista® operating system
®
®
In this guide, the operating systems above are referred to as "Windows 2000",
"Windows XP", "Windows Vista", "Windows 7", "Windows 8", and
"Windows 8.1". Furthermore, the collective term Windows may be used to
refer to Windows 2000, Windows XP, Windows Vista, Windows 7,
Windows 8, and Windows 8.1.
•
•
•
•
•
•
•
•
Mac OS X 10.3.x
Mac OS X 10.4.x
Mac OS X 10.5.x
Mac OS X 10.6.x
OS X 10.7.x
OS X 10.8.x
OS X 10.9.x
OS X 10.10.x
In this guide, the operating systems above are referred to as "Mac OS X
10.3.x", "Mac OS X 10.4.x", "Mac OS X 10.5.x", "Mac OS X 10.6.x", "OS X
10.7.x", "OS X 10.8.x", "OS X 10.9.x", and "OS X 10.10.x". Furthermore, the
collective term "OS X" is used to refer to them all.
Trademarks
EPSON is a registered trademark, EXCEED YOUR VISION, ELPLP and their
logos are registered trademarks or trademarks of Seiko Epson Corporation.
Mac, Mac OS, and OS X, are trademarks of Apple Inc.
Microsoft, Windows, Windows Vista, PowerPoint, and the Windows logo are
trademarks or registered trademarks of Microsoft Corporation in the United
States and/or other countries.
WPA™ and WPA2™ are registered trademarks of Wi-Fi Alliance.
App Store is a service mark of Apple Inc.
Google play is a trademark of Google Inc.
ad
o
nl
ow
D
166
ed
Notices
m
fro
Seiko Epson Corporation shall not be liable against any damages or problems
arising from the use of any options or any consumable products other than
those designated as Original Epson Products or Epson Approved Products by
Seiko Epson Corporation.
The contents of this guide may be changed or updated without further notice.
Illustrations in this guide and the actual projector may differ.
Copyright Attribution
This information is subject to change without notice.
e
Neither Seiko Epson Corporation nor its affiliates shall be liable to the
purchaser of this product or third parties for damages, losses, costs, or
expenses incurred by the purchaser or third parties as a result of: accident,
misuse, or abuse of this product or unauthorized modifications, repairs, or
alterations to this product, or (excluding the U.S.) failure to strictly comply
with Seiko Epson Corporation's operating and maintenance instructions.
.b
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the prior written
permission of Seiko Epson Corporation. No patent liability is assumed with
respect to the use of the information contained herein. Neither is any liability
assumed for damages resulting from the use of the information contained
herein.
re
or
Copyright Notice
2015.4 412878300/412879000EN
nb
Other product names used herein are also for identification purposes only
and may be trademarks of their respective owners. Epson disclaims any and
all rights in those marks.
de
"QR Code" is a registered trademark of DENSO WAVE INCORPORATED.
©SEIKO EPSON CORPORATION 2015. All rights reserved.
an
.v
MHL, the MHL logo, and Mobile High-Definition Link are the trademarks or
registered trademarks of MHL and LLC in the United States and/or other
countries.
w
w
w
HDMI and High-Definition Multimedia Interface are the trademarks or
registered trademarks of HDMI Licensing LLC.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising