TS-SW2502D4 10” Champion Series PRO Subwoofer with 3000 Max. (800 Watts Nom.) Powerful design to delivery deep, impactful bass Air Suspension System allows use in extremely small enclosures Recommended Enclosure : 0.35 ~ 0.7 Cubic Feet Introducing our new Champion Series PRO Subwoofers which feature a maximum power output of 3,000 watts. You now have a choice to select from either a Dual-Voice Coil 2-ohm or 4-ohm subwoofer: TS-W2502D2: Dual 2 ohm, 4 Layer, Long Coil (1 ohm x or 4 ohm) TS-W2502D4: Dual 4 ohm, 4 Layer, Long Coil (2 ohm x or 8 ohm) The TS-W2502D2/4 subwoofers are designed to produce enormously powerful music. Just take a look at its super-heavy-duty construction, all designed to handle up to 3,000 watts max. Double-stacked magnets for higher power, and a step-up radial surround for superior control and long excursions. We used a constructed cast-aluminum basket for this sub. Add in our patented IMPP cone and you've got a monster sub that can handle whatever you want to throw at it. Air Suspension System For its revolutionary 3.25 Inch deep Subwoofer, Pioneer created an air suspension system effective within a 70% smaller-thanprevious enclosure that locks air for a spring-like effect between main and drive cones moving in unison. The result is consistently clear,powerful,wide ranging bass response. The subwoofer's dual cone structure maintains better sound linearity and reliability after hours of hard use than conventional subwoofers with "spider" structures to keep the voice coil aligned. Double-Stack Magnet with Double-Stack Top Plate To produce the tremendous magnetic energy we envisioned for this sub, we employed double-stacked magnets, weighing a hefty 85oz, and a double-stacked top plate above them. This design ensures positive, powerful control of the voice coil during those long excursions — and it's one reason you can ring up those high SPL numbers. Wide-Roll 3-Layer Fiber Radial Surround A sub's surround plays a key role in a speaker's performance. In order for bass response to be clear and tight, the surround has to respond evenly around its entire circumference without flexing or puckering, even at high volume levels. That's why Pioneer created a surround consisting of two layers of urethane with a layer of interwoven fiber between them. It's strong, stable, and it reduces distortion. In addition, the wider-than-normal design provides a long, linear excursion for excellent control and heavyduty durability. Interlaced Basalt/Carbon Fiber Reinforced IMPP Cone To ensure that you get more natural bass, we’ve incorporated out new Basalt fiber technology into our shallow subwoofers. The volcanic-rock fibers create a cone that is lightweight, rigid, well damped, stable in temperature extremes, and more environmentally friendly. In short, this bass really rocks. Cast Aluminum Basket Designed from scratch by Pioneer, this one-piece aluminum basket assembly holds the motor assembly, cone, and magnet structure securely in place. The benefits of this design: reduced internal stress, superior damping, and increased magnetic efficiency. Dual Voice Coil TS-W2502D2/4 provides two voice coils, each either at dual 2 or dual 4 ohms. So you can use a low-impedance amp to produce much bigger, much more powerful bass. More options, more power: that's what DVC is all about. The Bridging Adapter is included for an easy Single Voice Coil hookup. It becomes a S Add Newly Designed Spoke Grilles We also recommend covering up your subwoofer with the UD-G258. This stylish spoke grille is a must add-on when building a system and gives the look of pure professionalism. TS-W2502D4 SPECIFICTAIONS Size 10" Max. Music Power (Nominal) 3,000 W (800 W) Frequency Response 20 Hz to 150 Hz Sensitivity (1 W/1 m) 89 dB Impedance 2 Ω x 2 or 4 Ω x 2 Mounting Depth 6-5/8" Cut-Out Dimensions 9-3/8" Recommended Enclosure 0.35 to 0.7 cu. ft.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project