4GM3W - NetComm

4GM3W - NetComm
XBox Setup
(4GM3W)
XBox Setup
There are two ways of allowing your XBox to communicate with the internet. One is through
port forwarding and the other is through the DMZ feature. Port forwarding will enable specified
ports on the router to get access to your XBox to communicate with the internet as if they
were directly connected by allowing access through. Setting your XBox as a DMZ host opens
all the ports on the router to allow access to a designated device.
Before you configure the router, you will need to set a static IP address on your
XBox. Follow the instructions at the link below to set a static IP address on your
XBox:
http://portforward.com/networking/staticip-xbox360.htm
You can use an IP address like 192.168.20.100 for example.
You can only forward a port to one location (IP address).
In some cases, this may cause issues when multiple LAN devices (computers,
game consoles, or VOIP ATAs) attempt to use online gaming as same time or
make multiple VOIP service connections.
In these cases, you would need to use an alternate port for any subsequent
connections after the first device.
Please consult your VOIP provider or game manufacturer for assistance with this.
Setting the XBox as the DMZ Host
http://192.168.20.1 in a web browser.
1.
Navigate to
2.
Enter admin as both the username and password then click Login.
3.
If prompted by the First-time Setup Wizard, click on No thanks, take me to the Basic
interface
4.
Click on Switch to advanced view option at the bottom right hand side of the screen.
5.
Select the Forwarding Rules menu then click the Miscellaneous option.
6.
Tick the Enable and enter the static IP address of the Xbox in the IP Address of DMZ
Host field. In this example, 192.168.20.100 is the IP address of the XBox.
7.
Ensure the UPnP setting Enable box is unticked.
8.
Click on the Save button.
9.
Reboot the router. (See the last page of the guide for rebooting instructions)
Adding Port Forwarding Rules for XBox
http://192.168.20.1 in a web browser.
1.
Navigate to
2.
Enter admin as both the username and password then click Login.
3.
If prompted by the First-time Setup Wizard, click on No thanks, take me to the
Basic interface
4.
Click on Switch to advanced view option at the bottom right hand side of the screen.
5.
Select the Forwarding Rules menu then click the Virtual Servers option.
6.
Enter the port number or port range into the Service Port field.
The ports for XBox are: 53, 80, 88, 1863 and 3074
7.
Enter the IP address of the XBox that you wish to port forward to in the Server IP field. In
this example, the IP address of the XBox is 192.168.20.100
8.
Ensure that the box is Ticked (✓) in the Enable field.
9.
Ensure that the Use Rule# field is set to (0) Always.
10. Click the Save button.
11. Reboot the router. (See the last page of the guide for rebooting instructions)
Rebooting the 4GM3W
1.
In the Advanced View, select the Toolbox menu then click the Reboot option.
2.
Click OK when prompted to confirm.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising