efx lite 6m - how to transfer data

efx lite 6m - how to transfer data
1. DATA SEND ( Send DATA to your PC )
̲G Connect the input of your MIDI interface to
MIDI OUT on the EFX LITE 6M.
̲G DO NOT plug in power or MIDI IN jack.
̲G Our recommended MIDI interfaces are the
M-Audio USB UNO 1x1 and the iCon MIDI
Port 1x1.
These MIDI interfaces are inexpensive and
have been tested to be compatible with
the EFX LITE 6M.
NOTE
̲G Some MIDI interfaces can not be used with the EFX LITE 6M. because the MIDI speed is too slow or the
MIDI Active Sensing message is transmitted.
̲G Make sure to install the latest drivers for your MIDI interface before attempting to update the EFX LITE
6M.
Download and install SendSX
http://www.bome.com/product/sendsx
Send SX is not free software. After a reasonable trial period, you will be asked to purchase Bome’s Send SX
to support its development on a voluntary basis. http://www.bome.com/products/sendsx/purchase
̲G Select the correct MIDI input from your
MIDI interface
̲G Plug in power while holding
the P3 and P4 switches down.
̲G The display will show 't', and
the LED above the P3 switch
will blink.
̲G At this moment, the two switches can be released.
̲G Press the P3 switch to transmit DATA to your PC through the MIDI OUT jack.
EFX LITE 6M
How To Transfer Data
1
̲G Save Midi In as a new file name.
2. DATA EDIT/ CREATE
Download and run 6M-EDITOR
http://www.musicomlab.com/download/6M-EDITOR.zip
̲G Open the Syx file or Press 'NEW'
̲G Edit the presets and preference.
̲G Save as a Syx file.
EFX LITE 6M
How To Transfer Data
2
3. DATA RECEIVE ( Receive DATA from your PC )
̲G Connect the output of your MIDI interface to
MIDI IN on the EFX LITE 6M.
̲G DO NOT plug in power or MIDI OUT jack.
̲G Select the correct MIDI Output from your
MIDI interface
̲G Plug in power while holding
the P2 and P4 switches down.
̲G The display will show 'r', and
the LED above the P2 switch
will blink.
̲G At this moment, the two
switches can be released.
̲G Open the Syx file and press 'Send[F4]'
̲G The LED above the P2 switch will blink
rapidly while the new DATA is loading.
̲G The EFX LITE 6M will automatically restart
when the update is complete.
EFX LITE 6M
How To Transfer Data
3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising