cordless reciprocating saw
WHAT’S IN THE BOX Reciprocating Saw CORDLESS RECIPROCATING SAW Timber Cutting Blade ORIGINAL INSTRUCTIONS SPECIFICATIONS Voltage: 18V No Load Speed: 0-2600spm Stroke Length:22mm Blade Fitment:Tool-free Cutting Capacities:Timber 100mm Non Alloy Steel 6mm Weight: 1.5kg Battery & Charger sold separately ozito-diy.co.uk PXRSS-400U WARRANTY All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the unlikely event that your device develops a fault, please contact our service department at the address shown on this guarantee card. You can also contact us by telephone using the customer service number shown. Please note the following terms under which guarantee claims can be made: 1. These warranty terms regulate additional warranty services, which the manufacturer mentioned below promises to buyers of its new products in addition to their statutory guarantee claims are not affected by this guarantee. Our guarantee is free of charge to you. 2. The warranty services only covers defects due to material or manufacturing faults on a product which you have bought from the manufacturer mentioned below are limited to either the rectification of said defects on the product or the replacement of the product, whichever we prefer. Please note that our devices are not designed for use in commercial, trade or professional applications. A guarantee contract will not be created if the device has been used by commercial, trade or industrial business or has been exposed to similar stresses during the guarantee period. 3. The following are not covered by our guarantee: - Damage to the device caused by a failure to follow the assembly instructions or due to incorrect installation, a failure to follow the operating instructions (for example connecting it to an incorrect mains voltage or current type) or a failure to follow the maintenance and safety instructions or by exposing the device to abnormal environmental conditions or by lack of care and maintenance. - Damage to the device caused by abuse or incorrect use (for example overloading the device or the use or unapproved tools or accessories), ingress of foreign bodies into the device (such as sand, stones or dust, transport damage), the use of force or damage caused by external forces (for example by dropping it). - Damage to the device or parts of the device caused by normal or natural wear or tear or by normal use of the device. covered by a 12 month warranty. Warranty excludes consumable parts, for example: cutting blades. Guarantee claims should be submitted before the end of the guarantee period within two weeks of the defect being noticed. No guarantee claims will be accepted after the end of the guarantee period. The original guarantee period remains applicable to the device even if repairs are carried out or parts are replaced. In such cases, the work performed or parts fitted will not result in an extension of the guarantee period, and no new guarantee will become active for the work performed or parts fitted. This also applies if an on-site service is used. IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR REGISTER RECEIPT. Please refer to the restrictions of this warranty concerning wearing parts, consumables and missing parts as set out in the service information in these operating instructions. CUSTOMER SERVICE HELPLINE GB: 0151 294 4488 IRL: 1850 882711 Ozito-diy.co.uk 4. Your Product is guaranteed for a period of 60 months from the original date of purchase and is intended for DIY (Do It Yourself) use only. Lithium Ion batteries and chargers are OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG 0416 SETUP & PREPARATION KNOW YOUR PRODUCT CORDLESS RECIPROCATING SAW 1 Timber Cutting Blade 5 Variable Speed Trigger 2 Pivoting Shoe (Adjustable) 6 Sure Grip Handle 3 Blade Holder 7 Lock-Off Button 1. ASSEMBLY WARNING! ENSURE THE TOOL IS SWITCHED OFF AND THE BATTERY IS REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING TASKS. 4 Shoe Locking Button Fitting a Cutting Blade 1Rotate and hold the blade holder anti-clockwise. 2Insert the blade and release the blade holder. 3Ensure the blade is secure by pulling on the blade. 1 2 3 4 5 6 7 Removing a Cutting Blade 1Rotate and hold the blade holder anti-clockwise. 2Remove the blade and release the blade holder. BATTERY & CHARGER (sold separately) This tool is compatible with all battery and chargers from the Ozito Power X Change Range. Adjusting the Pivot Shoe 1Push the shoe locking button in from the left side of the saw to unlock the shoe. 2Push the shoe in or out into the desired position. ONLINE MANUAL Scan this QR Code with your mobile device to take you to the online manual. 3Secure in place by pressing the shoe locking button in from the right side of the saw. 2. BATTERY & CHARGING (sold separately) CAUTION: THE CHARGER FOR THIS PRODUCT SHOULD BE PROTECTED BY A RESIDUAL CURRENT DEVICE (RATED AT 30MA OR LESS). Charging your lithium ion battery - Fast Charger 1 Connect the charger into a mains power outlet. 2The charger LED will flash green showing power is being supplied to the charger. 1 Connect the charger into a mains power outlet. 2The charger LED will flash green showing power is being supplied to the charger. 3With the battery sitting on a flat surface, align the raised ribs on the battery with the recess in the charger and slide onto the battery ensuring a firm connection. 3With the charger sitting on a flat surface, align the raised ribs on the battery with the recess in the charger and slide onto the charger ensuring a firm connection. 4 The charger LED will illuminate red signifying that the battery is charging. Charging your lithium ion battery - Eco Charger 4 The charger LED will illuminate red signifying that the battery is charging. 5 When removing the charger from the battery, first press the battery release tab, then slide the charger from its position. 5 The charger LED will illuminate green once the battery is charged. Charger LED Indicator LED Indicator Situation GREEN (Flashing) Stand By (no battery pack is inserted) RED (Illuminated) Battery is charging (low charge) GREEN (Illuminated) Battery is Charged and ready for use RED (Flashing) Battery or Charger fault RED & GREEN (Flashing) Battery pack is too hot or too cold (remove battery from charger and store at room temperature 20ºC. Insert battery again when at correct charging temperature). If this happens again, the battery is defective and needs to be replaced. Charger LED Indicator LED Indicator Situation GREEN (Flashing) Stand By (no battery pack is inserted) RED (Flashing) Battery is charging (low charge) RED (Illuminated) Battery is charging (mid charge) GREEN (Illuminated) Battery is 85% - 100% Charged and ready for use BOTH(Illuminated) Battery pack is too hot or too cold (charging will begin automatically when battery reaches correct charging temperature). BOTH (Flashing) Defective battery. Never charge a defective battery pack! Remove battery pack from charger. Battery Charge Indicator The purchased battery is equipped with a battery charge indicator to show the state of the battery charge. Press the charge indicator button and look to see which LED lights. Battery requires immediate charging Low state of charge, requires charging soon. Mid state of charge Full state of charge. Note: The battery needs to be removed from the tool to check the state of charge. OPERATION 4. FITTING THE BATTERY Inserting & Removing the Battery (not included) 1Align the ribs of the battery with the recess at the base of the saws rear handle and push in until it clicks into place. 2To remove, press and hold the battery release tab and then slide out. Battery protection system The tool is equipped with the battery protection system, which helps to ensure a long service life. The output power automatically cuts off during operation when the tool and/or battery are placed under the following situations: • When the tool is overloaded: If this occurs, release the trigger switch and remove causes of overload, then pull the switch trigger again to restart. • When the remaining battery capacity becomes low: Recharge the battery pack. Note: The battery protection system does not in any way damage the tool. Note: The indicated capacity may be lower than the actual level during use or immediately after using the tool. 5. CUTTING PROCEDURE Turning On and Off 1Press and hold the lock-off button. 2Squeeze the on/off trigger to start operating. Note: The lock-off button can be released once operating 3To stop the saw, release the on/ off trigger. Cutting Procedure 1Firmly press the pivoting shoe against the work piece. 2Start the reciprocating saw. 3Keep the adjustable pivot shoe firmly against the work piece throughout the cut. Note: Do not apply excessive pressure, allow the blade to do the work. CAUTION: DO NOT ALLOW THE TOOL TO BOUNCE. IF THE PIVOT SHOE IS HELD AWAY FROM THE WORK PIECE DURING OPERATING, STRONG VIBRATION AND/ OR TWISTING MAY OCCUR CAUSING THE BLADE TO SNAP DANGEROUSLY. PXRSS-400U TROUBLESHOOTING LED lights do not illuminate on charger Check the charging adaptor is securely plugged into the wall out let. Check the battery is firmly connected to the charging cradle. Check that the charging jack is securely connected to the charging cradle. Sparking visible through the housing vents A small amount of sparking may be visible through the housing vents. This is normal and does not indicate a problem. Excessive sparking visible through the housing air vents and/or the reciprocating saw failing to operate May indicate the carbon brushes have worn out and need to be replaced. Carbon brushes should only be replaced by a qualified electrician or power tool repairer. Shoe locking button will not lock after repositioning The shoe lock will only lock once the shoe is in 1 of its 3 positions. Push the shoe in or out until the shoe can be locked. BATTERY & CHARGER SAFETY WARNINGS THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR YOUR BATTERY CHARGER. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Before using the charger read all instructions and cautionary markings on the charger, battery pack and the product using the battery pack. This charger is not intended for any uses other than charging rechargeable batteries. Any other use may result in risk of fire, electric shock or electrocution. Do not place any object on top of the charger or place the charger on a soft surface that may result in excessive internal heat. Place the charger in a position away from any heat source. To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting the charger. Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in the risk of fire, electric shock or electrocution. Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any way. Have it checked by an electrician or power tool repairer. Do not disassemble charger. Take it to an electrician or power tool repairer when service or repair is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire. To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning. Removing the battery pack will not reduce this risk. Never attempt to connect 2 chargers together. DO NOT store or use the tool and battery pack in locations where the temperature may reach or exceed 40ºC (such as inside sheds or metal buildings in summer). The charger is designed to operate on standard household electrical power (240 volts). Do not attempt to use it on any other voltage! The battery pack is not fully charged out of the carton. First read the safety instructions and then follow the charging notes and procedures. The longest life and best performance can be obtained if the battery pack is charged when the air temperature is between 18 - 24ºC. Do not charge the battery pack in an air temperature below 10ºC or above 40ºC. This is important and will prevent damage to the battery pack. Do not incinerate the battery pack even if it is seriously damaged or is completely worn out. The battery can explode in a fire. Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, immediately discontinue use and do not recharge. During charging, the battery must be placed in a well ventilated area. MAINTENANCE WARNING! ALWAYS ENSURE THE TOOL HAS COMPLETELY STOPPED AND THE BATTERY IS REMOVED PRIOR TO ANY MAINTENANCE. •A fter each use, blow air through the tool housing to ensure it is free from all dust, dirt, etc. Build up of dust, dirt particles may cause the tool to overheat and shorten the life of the tool. • If the housing of the reciprocating saw requires cleaning, do not use solvents but a moist soft cloth or soft brush only. •N ever let any liquid get inside the tool, never immerse any part of the tool into liquid. •W hen not in use, the reciprocating saw should be stored in a dry, frost free location not within the reach of children. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the reciprocating saw by an unauthorised person or by mishandling of the reciprocating saw. SPARE PARTS Spare parts can be ordered from the Special Orders Desk at your local Bunnings Warehouse or Homebase store. For further information, or any parts visit www.ozito-diy.co.uk or contact Ozito Customer Service: Great Britain: 0151 294 4488 Ireland: 1850 882711 E-mail: [email protected] DESCRIPTION OF SYMBOLS V Volts Hz Hertz Alternating current Ah Amp hour dc/ Direct current no No load speed spm Strokes per minute ac/~ Warning Read instruction manual ELECTRICAL SAFETY WARNING! This tools charger is double insulated; therefore no earth wire is required. When using mains-powered tools, basic safety precautions, including the following, should always be followed to reduce risk of fire, electric shock, personal injury and material damage. Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before operating the tool. Save these instructions and other documents supplied with this tool for future reference. The charger has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Ozito tools are interchangeable for the UK. If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard. Note: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is for added protection against injury resulting from a possible electrical insulation failure within the tool. The power supply for this products charger should be protected by a residual current device (rated at 30mA or less). A residual current device reduces the risk of electric shock. GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1. Work area safety a. Keep work area clean and well lit. Cluttered or dark areas invite accidents. b. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2. Electrical safety a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3. Personal safety a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 4. Power tool use and care a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. Battery tool use and care a.Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. b. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. c. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. d. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. 6. Service a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. f. RECIPROCATING SAW SAFETY WARNINGS • WARNING! Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. • Wear a safety helmet, safety glasses and/or face shield. It is also highly recommended that you wear a dust mask, ear protection and padded gloves. • Check the blade carefully for cracks or damage prior to operation. Replace cracked or damaged blades immediately. • Hold the tool firmly during operation. Always hold the adjustable pivoting shoe firmly against the work piece. • Ensure no one is below you when using the tool in elevated conditions. • Do not point the tool at anyone in the immediate vicinity. WARNING! When making a “blind” cut (you can’t see behind what is being cut), be sure that hidden electrical wiring or water pipes are not in the path of the cut. If wires are present, they must be disconnected at their power source by a qualified person or avoided to prevent the possibility of lethal shock or fire. • Water pipes in “blind” areas must be drained and capped before cutting. • If the blade hits against objects during operation, damage to the tool or dangerous blade breakage may occur. • Watch out for cut-off portions of the work piece being cut. They may fall and cause injury to you or someone near you. • When cutting metals, be cautious of hot flying debris. • Do not touch the blade or the work piece immediately after operation; they may be extremely hot and could potentially burn your skin. • If you withdraw the blade from the work piece during operation, a strong reaction could be produced, which could cause the blade to snap or cause you to lose your grip and/or control of the saw. Always switch off the tool and wait until the blade has come to a complete stop before with drawing the blade from the work piece. WARNING! Some dust created by power sanding, sawing, grinding, drilling and other construction activities contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints; • Crystalline silica from bricks, cement and other masonry products, and; • Arsenic and chromium from chemically-treated timber. The risk from such exposures vary depending on how often you do this type of work. To reduce your exposure to these chemicals; work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specifically designed to filter out microscopic particles. Always wear eye protection and a dust mask for dusty applications and when drilling/chiselling overhead. Sanding particles can be absorbed by your eyes and inhaled easily and may cause health complications. Service information Declaration of confirmity We have competent service partners in all countries named on the guarantee certificate whose contact details can also be found on the guarantee certificate. These partners will help you with all service requests such as repairs, spare and wearing part orders or the purchase of consumables. Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables. Wear parts* Category Consumables* Missing parts Battery Example Saw blade explains the following conformity according to EU directives and norms for the following product 2014/29/EU 2005/32/EC_2009/125/EC 2014/35/EU 2006/28/EC X 2014/30/EU 2014/32/EU 2014/53/EC In the effect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Please ensure that you provide a precise description of the problem and answer the following questions in all cases: 90/396/EC_2009/142/EC Did the equipment work at all or was it defective from the beginning? Did you notice anything (symptom or defect) prior to the failure? What malfunction does the equipment have in your opinion (main symptom)? Describe this malfunction. GB Additonal operating & safety instructions Cordless Reciprocating Saw Cordless Reciprocating Saw PXRSS-400U / Fast Charger PXCG-030U (Ozito) * Not necessarily included in the scope of delivery! • • • PXRSS-400U ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar 2014/68/EU 89/686/EC_96/58/EC X 2006/42/EC Annex IV Notified Body: Notified Body No.: Reg. No.: 2000/14/EC_2005/88/EC Annex V Annex VI Noise: measured LWA = dB (A); guaranteed LWA = dB (A) P = KW; L/Ø = cm Notified Body: 2004/26/EC Emission No.: X 2011/65/EU Standard references: EN 60745-1; EN 60745-2-11; EN 62233; EN 60335-1; EN 60335-2-29; EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3; Landau/Isar, den 22.03.2016 Weichselgartner/General-Manager Yang/Product-Management Archive-File/Record: NAPR014204 Documents registrar: R. Gerhard Wiesenweg 22, D-94405 Landau/Isar First CE: 16 Art.-No.: 43.263.04 I.-No.: 11016 Subject to change without notice Danger! - Read the operating instructions to reduce the risk of inquiry Caution! Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted by the device can cause loss of sight. - 135 - Caution! Wear ear-muffs. The impact of noise can cause damage to hearing. Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials. Never use the device to work on any materials containing asbestos! size 445 x 210 mm Store the battery only in dry rooms with an ambient temperature of +10°C to +40°C. Place only charged batteries in storage (charged at least 40%). (not included in delivery) The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of the iSC GmbH. Subject to technical changes Items supplied Please check that the article is complete as specified in the scope of delivery. If parts are missing, please contact our service center or the sales outlet where you made your purchase at the latest within 5 working days after purchasing the product and upon presentation of a valid bill of purchase. Also, refer to the warranty table in the service information at the end of the operating instructions. • Open the packaging and take out the equipment with care. • Remove the packaging material and any packaging and/or transportation braces (if available). • Check to see if all items are supplied. • Inspect the equipment and accessories for transport damage. • If possible, please keep the packaging until the end of the guarantee period. Technical data Motor power supply: ................................ 18 V DC Stroke speed: ..................................... 0-2600/min Stroke height: ............................................ 22 mm Cutting depth, wood: ............................... 100 mm Cutting depth, iron: ...................................... 6 mm Maximum saw blade width: ...................... 1.6 mm Weight: ........................................................1.5 kg Battery and charger sold separately. This tool is compatible with all 18V battery and chargers from the Power X Change range. Wear ear-muffs. The impact of noise can cause damage to hearing. Danger! The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small parts. There is a danger of swallowing or suffocating! Total vibration values (vector sum of three directions) determined in accordance with EN 60745. Proper use The universal saw is designed for sawing wood, iron, non-ferrous metals and plastics using the appropriate saw blades. The specified vibration value was established in accordance with a standardized testing method. It may change according to how the electric equipment is used and may exceed the specified value in exceptional circumstances. The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this. Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes. Danger! Sound and vibration Sound and vibration values were measured in accordance with EN 60745. LpA sound pressure level ...................... 85.4 dB(A) KpA uncertainty .............................................. 3 dB LWA sound power level ......................... 96.4 dB(A) KWA uncertainty ............................................. 3 dB Vibration emission value ah = 19.054 m/s2 K uncertainty = 1.5 m/s2 The specified vibration value can be used to compare the equipment with other electric power tools. Caution! Residual risks Even if you use this electric power tool in accordance with instructions, certain residual risks cannot be rules out. The following hazards may arise in connection with the equipment’s construction and layout: 1. Lung damage if no suitable protective dust mask is used. 2. Damage to hearing if no suitable ear protection is used. 3. Health damage caused by hand-arm vibrations if the equipment is used over a prolonged period or is not properly guided and maintained. Charger indicator / Fast Charger Indicator status For EU countries only Never place any electric power tools in your household refuse. To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and its implementation in national laws, old electric power tools have to be separated from other waste and disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot. Recycling alternative to the return request: As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment must make sure that the equipment is properly disposed of if he no longer wants to keep the equipment. The old equipment can be returned to a suitable collection point that will dispose of the equipment in accordance with the national recycling and waste disposal regulations. This does not apply to any accessories or aids without electrical components supplied with the old equipment. This consignment contains lithium-ion batteries. In accordance with special provision 188 this consignment is not subject to the ADR regulations. Handle with care. Danger of ignition in case of damage to the consignment package. If the consignment package is damaged: Check and if necessary repackage. For further information contact: 0049 1807 10 20 20 66 (fixed network 14 ct/min, mobile phone max. 42 ct/min) Outside Germany charges will apply instead for a regular call to a landline number in Germany. The specified vibration value can be used for initial assessment of a harmful effect. Keep the noise emissions and vibrations to a minimum. • Only use appliances which are in perfect working order. • Service and clean the appliance regularly. • Adapt your working style to suit the appliance. • Do not overload the appliance. • Have the appliance serviced whenever necessary. • Switch the appliance off when it is not in use. • Wear protective gloves. size 445 x 210 mm Red LED Off Green LED Flashing On Off Off On Flashing Off Flashing Flashing On On Explanations and actions Ready for use The charger is connected to the mains and is ready for use; there is no battery pack in the charger Charging The charger is charging the battery pack in quick charge mode. The battery is 85% -100% charged and ready for use. (Charging time for 1.5 Ah battery: 30 min) (Charging time for 2.0 Ah battery: 40 min) (Charging time for 3.0 Ah battery: 60 min) (Charging time for 4.0 Ah battery: 80 min) (Charging time for 5.2 Ah battery: 105 min) Action: Take the battery pack out of the charger. Disconnect the charger from the mains supply. Adapted charging The charger is in gentle charging mode. For safety reasons the charging is performed less quickly and takes more than 1 hour. The reasons can be: - The battery pack has not been used for a very long time or an already flat battery was further discharged (exhaustive discharge). - The battery pack temperature is outside the ideal range (between 25° C and 45° C). Action: Wait for the charging to be completed; you can still continue to charge the battery pack. Fault Charging is no longer possible. The battery pack is defective. Action: Never charge a defective battery pack. Take the battery pack out of the charger. Temperature fault The battery pack is too hot (e.g. due to direct sunshine) or too cold (below 0° C). Action: Remove the battery pack and keep it at room temperature (approx. 20° C) for one day .
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project