Disabling Power Saver

Disabling Power Saver
Disabling Power Saver
Printing
Disabling Power Saver in the Setup Menu helps keep your printer ready to print without
delays.
Paper handling
1 Press Menu until you see Setup Menu, and then press Select.
2 Press Menu until you see Power Saver, and then press Select.
Maintenance
3 Press Menu until you see Disabled, and then press Select.
If the Disabled value is not available, first change the Energy Conserve setting to Off in the
Config Menu:
Troubleshooting
1 Turn the printer off.
2 Press and hold the Select and Return buttons, and then turn the printer on.
3 Release the buttons when Performing Self Test appears on the display.
Administration
When the printer self test is done, Config Menu is displayed.
4 Press Menu until you see Energy Conserve, and then press Select.
Index
5 Press Menu until you see Off, and then press Select.
Energy Conserve SAVED briefly appears, and then Config Menu is displayed.
6 Press Menu until you see Exit Config Menu, and then press Select.
www.lexmark.com
Lexmark C750
1
Disabling Power Saver
2
Printing
Activating Menu Changes briefly appears, followed by Performing Self Test.
The printer returns to the Ready message.
Paper handling
Maintenance
Now you can select the Disabled value from the Power Saver menu item.
Note: You can also disable Power Saver by issuing a Printer Job Language (PJL)
command. For more information, refer to the Technical Reference available
on Lexmark’s Web site at www.lexmark.com. ▲
Troubleshooting
Administration
Index
www.lexmark.com
Lexmark C750
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising