Operating instructions SAMSUNG LE37B650

Operating instructions SAMSUNG LE37B650
You can read the recommendations in the user guide, the technical guide or the installation guide for SAMSUNG LE37B650. You'll
find the answers to all your questions on the SAMSUNG LE37B650 in the user manual (information, specifications, safety advice,
size, accessories, etc.). Detailed instructions for use are in the User's Guide.
User manual SAMSUNG LE37B650
User guide SAMSUNG LE37B650
Operating instructions SAMSUNG LE37B650
Instructions for use SAMSUNG LE37B650
Instruction manual SAMSUNG LE37B650
You're reading an excerpt. Click here to read official SAMSUNG
LE37B650 user guide
http://yourpdfguides.com/dref/2569577
Manual abstract:
@@Extended viewing of movies and programs in aspect ratios that are different from the aspect ratio of the TV may cause image retention. Always
endeavour to avoid black borders top or bottom by using the zoom function. This will help eliminate the black borders and fit the picture to the entire area of
the screen. Using a video game console may cause image retention and is not recommended. @@@@@@@@Please check with your local dealer about the
availability of DVB-T service in your area. 2. Although this TV set meets the current DVB-T standards as of [August, 2008], compatibility with future DVB-T
digital terrestrial broadcast cannot be guaranteed. 3. Some Digital TV functions may not be available or operate correctly in some countries or regions. 4.
For more information, please contact your local SAMSUNG customer care centre. Precautions When Displaying a Still Image A still image may cause
permanent damage to the TV screen Do not display still image and partially still on the LCD panel for more than 2 hours as it can cause screen image
retention. This image retention is also known as screen burn. To avoid such image retention, reduce the degree of brightness and contrast of the screen when
displaying a still image. Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the
screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. Displaying
still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the
`brightness' and `contrast' when displaying still images. 2009 Samsung Electronics Co.
, Ltd. All rights reserved. CONTENTS Setting up Your TV Viewing the Control Panel ........
..........
.....
.....
..........
..........
.....
.....
....... 2 Accessories ...
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
.... 3 Viewing the Connection Panel ......
..........
.....
.....
..........
..........
.....
.....
... 4 Viewing the Remote Control .......
..........
.....
.....
..........
..........
.....
.....
..... 6 Installing Batteries in the Remote Control .....
..........
.....
.....
..........
...... 7 Viewing the menus ....
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
.. 7 Plug & Play Feature........
..........
.....
.....
..........
..........
.....
.....
..........
....... 8 Media Play-DLNA Setting the DLNA Network ...
.....
.....
..........
..........
.....
.....
..........
..........
49 Installing the DLNA Application.....
.....
..........
..........
.....
.....
..........
...... 50 Using the DLNA Application....
.....
.....
..........
..........
.....
.....
..........
....... 51 Using the DLNA Function ...
.....
.....
..........
..........
.....
.....
..........
..........
. 53 Connecting Anynet+ Devices....
.....
..........
..........
.....
.....
..........
..........
54 Setting Up Anynet+ .....
.....
..........
..........
.....
.....
..........
..........
.....
.....
.... 55 Switching between Anynet+ Devices ......
..........
.....
.....
..........
..........
. 55 Recording ....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
......... 56 Listening through a Receiver (Home theatre).
.....
.....
..........
..........
... 56 Troubleshooting for Anynet+ ..
.....
..........
..........
.....
.....
..........
..........
... 57 ANYNET+ CHANNEL Channel Menu ..
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
...... 9 Managing Channels ....
.....
.....
..........
..........
.....
.....
..........
..........
.....
... 12 PICTURE Configuring the Picture Menu ..
..........
..........
.....
.....
..........
..........
.....
. 14 Viewing Picture-in-Picture....
..........
..........
.....
.....
..........
..........
.....
.....
18 Using Your TV as a Computer (PC) Display ..........
..........
.....
.....
...... 19 Content Library Using the Content Library ....
..........
.....
.....
..........
..........
.....
.....
..........
58 Using the TV Memory Contents..........
.....
.....
..........
..........
.....
.....
..... 59 Using the Content Management .....
..........
.....
.....
..........
..........
.....
.... 60 SOUND Configuring the Sound Menu .
..........
..........
.....
.....
..........
..........
.....
... 20 Setting up the TV with your PC..
..........
..........
.....
.....
..........
..........
.... 20 Selecting the Sound Mode .
.....
..........
..........
.....
.....
..........
..........
.....
. 22 Internet@TV Getting Started with Internet@TV....
..........
..........
.....
.....
..........
........ 61 Configuring the Internet@TV Screen ..
.....
.....
..........
..........
.....
.....
.... 62 Using the Profile Widget ......
..........
.....
.....
..........
..........
.....
.....
..........
63 Using the Weather Widget ..........
.....
.....
..........
..........
.....
.....
..........
... 65 Using the News Widget .......
.....
.....
..........
..........
.....
.....
..........
..........
65 Using the Flickr Widget.....
.....
..........
..........
.....
.....
..........
..........
.....
... 66 Using the Finance Widget ..
..........
..........
.....
.....
..........
..........
.....
.....
. 67 Using the Widget Gallery .........
..........
.....
.....
..........
..........
.....
.....
...... 67 SETUP Configuring the Setup Menu ....
..........
.....
.....
..........
..........
.....
.....
...... 22 Setting the Time....
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
24 Network Connection .....
..........
..........
.....
.....
..........
..........
.....
.....
....... 26 Setting the Network ...
..........
.....
.....
..........
..........
.....
.....
..........
..........
29 INPUT / SUPPORT Input Menu.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
....... 32 Support Menu ...
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
......... 32 Internet@TV Getting Started with Internet@TV.
..........
.....
.....
..........
..........
.....
.....
. 69 Setting up Internet@TV .........
..........
.....
.....
..........
..........
.....
.....
........ 69 Using the Internet@TV service..
..........
.....
.....
..........
..........
.....
.....
.... 70 Media Play (USB & DLNA) Connecting a USB Device ......
..........
.....
.....
..........
..........
.....
.....
....... 35 Media Play Function ...
..........
.....
.....
..........
..........
.....
.....
..........
......... 36 Sorting the Photo List .
.....
.....
..........
..........
.....
.....
..........
..........
.....
.... 37 Photo List Option Menu .
..........
..........
.....
.....
..........
..........
.....
.....
...... 38 Viewing a Photo or Slide Show....
..........
.....
.....
..........
..........
.....
.....
.. 39 Slide Show Option Menu ........
..........
.....
.....
..........
..........
.....
.....
....... 40 Sorting the Music List ...
..........
.....
.....
..........
..........
.....
.....
..........
....... 41 Music List Option Menu ...
.....
.....
..........
..........
.....
.....
..........
..........
.... 42 Playing a Music .
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
... 43 Sorting the Movie List .......
.....
.....
..........
..........
.....
.....
..........
..........
... 44 Music Play option Menu ..
.....
..........
..........
.....
.....
..........
..........
.....
.... 44 Movie List Option Menu .
..........
..........
.....
.....
..........
..........
.....
.....
...... 45 Playing a Movie File ....
..........
.....
.....
..........
..........
.....
.....
..........
........ 45 Movie Play Option Menu ..
.....
.....
..........
..........
.....
.....
..........
..........
... 47 Using the Setup Menu ..
.....
..........
..........
.....
.....
..........
..........
.....
.....
.. 48 Home Network Centre Home Network Centre ........
..........
.....
.....
..........
..........
.....
.....
..........
. 71 Setting Up the Home Network Centre .........
.....
.....
..........
..........
.....
. 72 Using the Message Function ....
..........
..........
.....
.....
..........
..........
.....
73 Using the Media Function .....
..........
..........
.....
.....
..........
..........
.....
.... 74 RECOMMENDATIONS Teletext Feature .
..........
..........
.....
.....
..........
..........
.....
.....
..........
........ 75 Installing the Stand ..
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
.. 76 Disconnecting the Stand........
..........
.....
.....
..........
..........
.....
.....
........ 77 Installing the Wall Mount Kit ..
..........
.....
.....
..........
..........
.....
.....
........ 77 Assembling the Cables ..
..........
.....
.....
..........
..........
.....
.....
..........
...... 77 Anti-Theft Kensington Lock ....
.....
.....
..........
..........
.....
.....
..........
....... 77 Securing the TV to the Wall ...
.....
.....
..........
..........
.....
.....
..........
........ 78 Troubleshooting: Before Contacting Service Personnel ..
.....
.....
...... 79 Specifications ....
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
... 80 Warning! Important Safety Instructions Wiring the Mains Power Supply Plug (UK Only) Warranty Card License TruSurround HD, SRS and symbol are
trademarks of SRS Labs, Inc. TruSurround HD technology is incorporated under license from SRS Labs, Inc.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. DivX Certified products using
Home Theatre Test Kit v3.0 or later: Plays DivX video, including premium content. Symbol N Note O One-Touch Button T TOOL Button English - 1 SETTING
UP YOUR TV N Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product
design and specifications may be changed without notice in order to enhance product performance. Viewing the Control Panel N The product colour and
shape may vary depending on the model. N The front panel buttons can be activated by touching it with your finger. 8 8 8 8 7 7 6 6 5 5 4 4 3 3 21 21 8 8 8 8 7
7 6 6 4 4 21 21 3 3 5 5 1 P (POWER): Press to turn the TV on and off. 2 POWER INDICATOR: Blinks and turns off when the power is on and lights up in
stand-by mode.
3 z: Press to change channels. In the on-screen menu, use the z buttons as you would use the and buttons on the remote control. 4 Y: Press to increase or
decrease the volume. In the on-screen menu, use the Y buttons as you would use the and buttons on the remote control. 5 MENU: Press to see an on-screen
menu of your TV's features. 6 SOURCE E: Toggles between all the available input sources. In the on-screen menu, use this button as you would use the
ENTERE button on the remote control. 7 REMOTE CONTROL SENSOR: Aim the remote control towards this spot on the TV. 8 SPEAKERS English - 2
Accessories Remote Control & Batteries (AAA x 2) Power Cord Cover-Bottom Cleaning Cloth Stand Screw (M4 X L16) (Depending on the model) Owner's
Instructions Programme CD Holder-Wire Cable (Depending on the model) N Please make sure the following items are included with your LCD TV. If any
items are missing, contact your dealer.
N The items colour and shape may vary depending on the model. English - Viewing the Connection Panel [TV Side Panel] [TV Rear Panel] 1 $ 2 34 5 # 2 #
@ ! 09 8 7 6 Powvolume level with the Amplifier's volume control. ! EXT1, 2 Inputs or outputs for external devices, such as VCR, DVD, video game device or
video disc players. N In EXT Mode, DTV Out supports MPEG SD Video and Audio only. Input/Output Specification Input Output Video Audio (L / R) RGB
Video + Audio (L / R) EXT 1 O O O Only TV or DTV output is available.
You're reading an excerpt. Click here to read official SAMSUNG
LE37B650 user guide
http://yourpdfguides.com/dref/2569577
EXT 2 O O X Output you can choose. @ AV IN [VIDEO] / [R-AUDIO-L] Video and audio inputs for external devices, such as a camcorder or VCR.
Connector # USB1(HDD) / USB2 Connector for software upgrades and Media Play, etc. You can connect to Samsung's network wirelessly using the
`Samsung Wireless LAN Adapter' (Sold separately). N For USB HDD, use the USB1 (HDD) port.
$ COMMON INTERFACE Slot When not inserting `CI CARD' in some channels, `Scrambled Signal' is displayed on the screen. The pairing information
containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. there a special fluorescent light or neon
sign nearby?OPERATION Viewing the menus Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust
different functions. MENU Button Display the main on-screen menu. RETURN Button Return to the previous menu. ENTERE / DIRECTION Button Move the
cursor and select an item. Select the currently selected item. Confirm the setting. EXIT Exit the on-screen menu. Operation of the OSD (On Screen Display)
The access step may differ depending on the selected menu.
1. Press the MENU button. 2. The main menu appears on the screen. The menu's left side has icons : Picture, Sound, Channel, Setup, Input, Application,
Support. Picture Mode Backlight Contrast Brightness Sharpness Colour Tint(G/R) AdvancedSettings :Standard :7 :95 :45 :50 :50 :G50/R50 3. Press the or
button to select one of the icons. 4. Then press the ENTERE button to access the icon's sub-menu. .
Press the or button to select the icon's submenu. Picture Mode :Standard Backlight Contrast Brightness Sharpness Colour Tint(G/R) AdvancedSettings
PictureOptions :7 :95 :45 :50 :50 :G50/R50 . Press the or button to decrease or increase the value of a particular item. The adjustment OSD may differ
depending on the selected menu. .
Press the ENTERE button to complete the configuration. Press the EXIT button to exit. Backlight 7 UMoveLAdjustEEnterRReturn Help icon English - Plug &
Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently. 1. Press the POWER button on the remote control.
N You can also use the POWERP button on the TV. N The message Select the OSD Language. is displayed. 2. Press the ENTERE button. Select the
appropriate language by pressing the or button. Press the ENTERE button to confirm your choice. Plug&Play 3. Press the or button to select Store Demo or
Home Use, then the ENTERE button. SelecttheOSDLanguage.
N We recommend setting the TV to Home Use mode for the best picture in your home MenuLanguage :English environment. N Store Demo mode is only
intended for use in retail environments. N If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the volume
button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds. EEnter 4. Press the ENTERE button. Select
the appropriate country by pressing the or button. Press the ENTERE button to confirm your choice. . Press the or button to select Air or Cable, then press the
ENTERE button.
N Air: Air antenna signal. N Cable: Cable antenna signal. . Press the or button to select the channel source to memorize. Press the ENTERE button to select
Start.
N When setting the antenna source to Cable, a step appears allowing you to set a value for the digital channel search. For more information, refer to
ChannelAutoStore. N Digital & Analogue: Digital and Analogue channels. Digital: Digital channels. Analogue: Analogue channels.
N The channel search will start and end automatically. N Press the ENTERE button at any time to interrupt the memorization process. N After all the
available channels are stored, the message Set the Clock Mode. is displayed. . Press the ENTERE button. Press the or button to select Auto, then Press the
ENTERE button. N If you select Manual, Set current date and time is displayed. N If you have received a digital signal, the time will be set automatically. If
not, select Manual to set the clock.
. The description for the connection method providing the best HD screen quality is displayed. Check the description and press the ENTERE button. 9. Press
the or button to select See Product Guide or Watch TV. Press the ENTERE button. See Product Guide: You are moved to the Product Guide where you can
view the introduction to the main functions of your new HDTV. Watch TV: You can watch the memorized channels. If you want to reset this feature..
. 1. Press the MENU button to display the menu. Press the or button to select Setup, then press the ENTERE button. 2.
Press the ENTERE button again to select Plug & Play. 3. Enter your 4 digit PIN number. The default PIN number of a new TV set is `0-0-0-0'. N If you want
to change PIN number, use the Change PIN function.
N The Plug & Play feature is only available in the TV mode. Setup Plug&Play Language Time GameMode BDWise NetworkType NetworkSetup ChildLock
:English :Off :Off :Cable :On English - CHANNEL Channel Menu Country Analogue Channel You can change the country for analogue channels. Digital
Channel You can change the country for digital channels. N The PIN number input screen appears. Enter your 4 digit PIN number. Channel Country
AutoStore ManualStore CableSearchOption FullGuide MiniGuide DefaultGuide ChannelList :FullGuide Auto Store You can scan for the frequency ranges
available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired
programme numbers. N If a channel is locked using the Child Lock function, the PIN input window appears. Air / Cable Antenna source to memorize Digital
& Analogue: Digital and Analogue channels. Digital: Digital channels.
Analogue: Analogue channels. When selecting CableDigital&Analogue or CableDigital: Provide a value to scan for cable channels.
SearchModeFull/Network/Quick N Quick Network ID: Displays the network identification code. Frequency: Displays the frequency for the channel. (Differs
in each country) Modulation: Displays available modulation values. Symbol Rate: Displays available symbol rates. N Scans for all channels with active
broadcast stations and stores them in the TV's memory. N If you want to stop Auto Store, press the ENTERE button. The Stop Auto Store? message will be
displayed. Select Yes by pressing the or button, then press the ENTERE button.
Manual Store N Scans for a channel manually and stores it in the TV's memory. N If a channel is locked using the Child Lock function, the PIN input window
appears. Digital Channel Manual store for digital channels. N Digital Channel is only available in DTV mode. Channel: Set the Channel number using the ,
or number (0~9) buttons.
You're reading an excerpt. Click here to read official SAMSUNG
LE37B650 user guide
http://yourpdfguides.com/dref/2569577
Frequency: Set the frequency using the number buttons. Bandwidth: Set the bandwidth using the , or number (0~9) buttons. N When it has finished, channels
are updated in the channel list. Analogue Channel Manual store for analogue channel. Programme (Programme number to be assigned to a channel): Sets
the programme number using the , or number (0~9) buttons.
ColourSystemAuto/PAL/SECAM/NTSC4.43: Sets the colour system value using the or button. SoundSystemBG/DK/I/L: Sets the sound system value using the
or button. English - 9 Channel (When you know the number of the channel to be stored): Press the or button to select C (Air channel) or S (Cable channel).
Press the button, then press the , or number (0~9) buttons to select the required number. N You can also select the channel number directly by pressing the
number (0~9) buttons. N If there is abnormal sound or no sound, reselect the sound standard required. N Search (When you do not know the channel
numbers): Press the or button to start the search. The tuner scans the frequency range until the first channel or the channel that you selected is received on
the screen. Store (When you store the channel and associated programme number): Set to OK by pressing the ENTERE button.
N Channel mode P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to
P99. You can select a channel by entering the position number in this mode. C (Air channel mode): You can select a channel by entering the assigned number
to each air broadcasting station in this mode. S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in
this mode. Cable Search Option (depending on the country) Using this function, you can manually add the channel range to be scanned by Full Search mode
of the Auto Store function. Freq.Start (Frequency Start): Set the start frequency (Differs in each country) Freq.Stop (Frequency Stop): Set the stop frequency
(Differs in each country) Modulation: Displays available modulation values. Symbol Rate: Displays available symbol rates. Full Guide / Mini Guide The EPG
(Electronic Programme Guide) information is provided by the broadcasters.
Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon
as new information becomes available. O You can also display the guide menu simply by pressing the GUIDE button. (To configure the Default Guide, refer
to the descriptions.) Full Guide Displays the programme information as time ordered One hour segments.
Two hours of programme information is displayed which may be scrolled forwards or backwards in time. Mini Guide The information of each programme is
displayed by each line on the current channel Mini Guide screen from the current programme onwards according to the programme starting time order.
DefaultGuideMiniGuide/FullGuide You can decide whether to display either the Mini Guide or the Full Guide when the GUIDE button on the remote control
is pressed. Channel List For detailed procedures on using the Channel List, refer to the `Managing Channels' instructions. O You can select these options by
simply pressing the CH LIST button on the remote control.
Channel Mode When press the P >/< button, Channels will be switched within the selected channel list. Added Ch. Channels will be switched within the
memorized channel list. Favourite Ch. Channels will be switched within the favourite channel list. English - 10 Fine Tune If the reception is clear, you do not
have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune
the channel manually. N Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the
channel banner. N To reset the fine-tuning, select Reset by pressing the or button and then press the ENTERE button. N Only Analogue TV channels can be
fine tuned.
Using the Full / Mini Guide FullGuide 900 DTVCable900ftn2:10Tue1Jun FreshmenOnCampus 2:00-2:30 NoDetailedInformation Today 2:00-3:00
FreshmenO.. StreetHypn.. MintExtra Loaded 40withDynamiteMC TheDistillery SmashHits!Sunday 3:00-4:00 900ftn 901ITVPlay 902Kerrang! 903Kiss
904oneword 905Hits NoInformation NoInformation Kisstory NoInformation MiniGuide 2:00 2:30 5:00 DTVCable900ftn FreshmenOnCampus StreetHypnosis
BoozeBritain EWatch Information FullGuide NextPage Exit EWatch Information MiniGuide +24Hours Exit To... Watch a programme in the EPG list Exit the
guide Then...
Select a programme by pressing the , , , button. Press the blue button If the next programme is selected, it is scheduled with the clock icon displayed. If the
ENTERE button is pressed again, press the , button to select Cancel Schedules, the scheduling is cancelled with the clock icon gone. View programme
information Select a programme of your choice by pressing the , , , button. Then press the INFO button when the programme of your choice is highlighted.
The programme title is on the upper part of the screen centre. Please click on INFO button for the detailed information. Channel Number, Running Time,
Status Bar, Parental Level, Video Quality Information (HD / SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of
the highlighted programme are included on the detailed information. "..
." will be appeared if the summary is long. Toggle between the Mini Guide and Full Guide In Full Guide Scrolls backwards quickly (24 hours). Scrolls
forwards quickly (24 hours). In Mini Guide Display previous page quickly. Display next page quickly. Press the red button repeatedly. Press the Green button
repeatedly. Press the Yellow button repeatedly. Press the Green button.
Press the Yellow button. English - 11 Managing Channels Using this menu, you can add / delete or set favourites channels and use the programme guide for
digital broadcasts. All Channels Shows all currently available channels. Added Channels Shows all added channels. Favourites Shows all favourite channels.
O To select the favourites channels you have set up, press the FAV.CH button on the remote control. 824UKTVGold 825UKTVstyle AddedChannels A 1CA2C-A3C-A4C-A5C-A6C-A7C-A8C-- All ChannelType Zoom SelectTTools Programmed Shows all current reserved programmes. N Select a channel in the
All Channels, Added Channels or Favourites screen by pressing the / buttons, and pressing the ENTERE button. Then you can watch the selected channel.
N Using the Colour buttons with the Channel List Red (Channel Type): Toggle between your TV, Radio, Data / Other and All. Green (Zoom): Enlarges or
shrinks a channel number. Yellow (Select): Selects multiple channel lists. You can perform the add/delete or add to favourites/delete from favourites function
for multiple channels at the same time.
You're reading an excerpt. Click here to read official SAMSUNG
LE37B650 user guide
http://yourpdfguides.com/dref/2569577
Select the required channels and press the Yellow button to set all the selected channels at the same time.
The c mark appears to the left of the selected channels. TOOLS (Tools): Displays the Delete (or Add), Add to Favourite (or Delete from Favourite), Lock (or
Unlock), Timer Viewing, Edit Channel Name, Edit Channel Number, Sort, Select All, Deselect All or Auto Store menu. (The Options menus may differ
depending on the situation.) N Channel Status Display Icons A: An Analogue channel. c: A channel selected by pressing the Yellow button.
*: A channel set as a Favourite. (: A programme currently being broadcast. \: A locked channel. ): A reserved programme Channel List Option Menu (in All
Channels / Added Channels / Favourites) N Press the TOOLS button to use the option menu. N Option menu items may differ depending on the channel status.
Add / Delete You can delete or add a channel to display the channels you want. N All deleted channels will be shown on All Channels menu. N A graycoloured channel indicates the channel has been deleted. N The Add menu only appears for deleted channels. N You can also delete a channel to the Added
Channels or Favourites menu in the same manner.
824UKTVGold 825UKTVstyle Add to Favourite / Delete from Favourite You can set channels you watch frequently as favourites. T Press the TOOLS button
to display the Tools menu. You can also set the add to (or delete from) Favourite by selecting Tools AddtoFavourite (or Delete from Favourite). N The "*"
symbol will be displayed and the channel will be set as a favourite. N All favourite channels will be shown on Favourites menu. All ChannelType Zoom
SelectTTools AllChannels A 1C-A2C-A3C-A4C-A5C-A6C-A7C-A8C-- Delete AddtoFavourite Lock TimerViewing EditChannelName Sort English - 12 Lock /
Unlock You can lock a channel so that the channel cannot be selected and viewed. N This function is available only when the Child Lock is set to On. N The
PIN number input screen appears. Enter your 4 digit PIN number. N The default PIN number of a new TV set is "0-0-0-0".
You can change the PIN, by selecting Change PIN from the menu. N The "\" symbol will be displayed and the channel will be locked. Timer Viewing If you
reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching
another channel. To reserve a programme, set the current time first. N Only memorized channels can be reserved.
N You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control. N Reserving a programme will
be shown in the Programmed menu. N Digital Programme Guide and Viewing Reservation When a digital channel is selected, and you press the button, the
Programme Guide for the channel appears. You can reserve a programme according to the procedures described above. Edit Channel Name (analogue
channels only) Channels can labelled so that their call letters appear whenever the channel is selected.
N The names of digital broadcasting channels are automatically assigned and cannot be renamed. Edit Channel Number (digital channels only) You can also
edit the channel number by pressing the number buttons on the remote control. Sort (analogue channels only) This operation allows you to change the
programme numbers of the stored channels. This operation may be necessary after using the auto store. Select All / Deselect All Select All: You can select all
the channels in the channel list. Deselect All: You can deselect all the selected channels. N You can only select Deselect All when there is a selected channel.
Auto Store N For detailed procedures on setting up options, refer to the `Channel Menu' instructions. N If a channel is locked using the Child Lock function,
the PIN input window appears. Channel List Option Menu (in Programmed) You can view, modify or delete a reservation.
N Press the TOOLS button to use the option menu. Change Info Select to change a viewing reservation. Cancel Schedules Select to cancel a viewin`g
reservation. Information Select to view a viewing reservation. (You can also change the reservation information.) Select All Select all reserved programmes.
Programmed 1/1/2008 13:595TV1) ChangeInfo CancelSchedules 18:592TV3)TheEqualizer Information SelectAll 20:592TV3)McMillan&Wife
21:592TV3)M.Spillane'smike All Zoom SelectTToolsEInformation English - 13 PICTURE Configuring the Picture Menu Mode You can select the type of
picture which best corresponds to your viewing requirements. T Press the TOOLS button to display the Tools menu. You can also set the picture mode by
selecting ToolsPictureMode.
Picture Mode Backlight Contrast Brightness Sharpness Colour Tint(G/R) AdvancedSettings :Standard :7 :95 :45 :50 :50 :G50/R50 Dynamic Selects the
picture for increased definition in a bright room. Standard Selects the picture for the optimum display in a normal environment. Natural Selects the picture for
an optimum and eye-comfortable display. Movie Selects the picture for viewing movies in a dark room. Backlight / Contrast / Brightness / Sharpness / Colour
/ Tint(G/R) Your television has several setting options that allow you to control the picture quality.
Backlight 7 Backlight: Adjusts the brightness of LCD back light. Contrast: Adjusts the contrast level of the picture. UMoveLAdjustEEnterRReturn Brightness:
Adjusts the brightness level of the picture Sharpness: Adjusts the edge definition of the picture. Colour: Adjusts colour saturation of the picture. Tint(G/R):
Adjusts the colour tint of the picture.
N In analogue TV, Ext., AV modes of the PAL system, you cannot use the Tint(G/R) Function. N When you make changes to Backlight, Contrast, Brightness,
Sharpness, Colour or Tint(G/R) the OSD will be adjusted accordingly. N In PC mode, you can only make changes to Backlight, Contrast and Brightness. N
Settings can be adjusted and stored for each external device you have connected to an input of the TV. N The energy consumed during use can be significantly
reduced if the brightness level of the picture is lowered, which will reduce the overall running cost. Advanced Settings Samsung's new TVs allow you to make
even more precise picture settings than previous models. N Advanced Settings is available in Standard or Movie mode. N In PC mode, you can only make
changes to Dynamic Contrast, Gamma and White Balance from among the Advanced Settings items. BlackTone DynamicContrast Gamma ColourSpace
WhiteBalance FleshTone EdgeEnhancement AdvancedSettings :Off :Medium :0 :Native :0 :On UMoveEEnterRReturn BlackToneOff/Dark/Darker/Darkest
You can select the black level on the screen to adjust the screen depth.
DynamicContrastOff/Low/Medium/High You can adjust the screen contrast so that the optimal contrast is provided. Gamma You can adjust the primary
colour (red, green, blue) intensity.
You're reading an excerpt. Click here to read official SAMSUNG
LE37B650 user guide
http://yourpdfguides.com/dref/2569577
English - 14 Colour Space Colour space is a colour matrix composed of red, green and blue colours. Select your favourites colour space to experience the
most natural colour. Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on program sources. Native: Native Colour Space
offers deep and rich colour tone. Custom: Adjusts the colour range to suit your preference. N Changing the adjustment value will refresh the adjusted screen.
N Settings can be adjusted and stored for each external device you have connected to an input of the TV. For example, if you have a DVD player connected to
HDMI 1 and it is currently selected, settings and adjustments will be saved for the DVD player.
Colour: Red, Green, Blue, Yellow, Cyan or Magenta N Colour is available when Colour Space is set to Custom. N In Colour, you can adjust the RGB values
for the selected colour. N To reset the adjusted RGB value, select Reset. Red: Adjusts the red saturation level of the selected colour. Green: Adjusts the green
saturation level of the selected colour.
Blue: Adjusts the blue saturation level of the selected colour. Reset: Resets the colour space to the default values. White Balance You can adjust the colour
temperature for more natural picture colours. R-Offset: Adjusts the red colour darkness. G-Offset: Adjusts the green colour darkness.
B-Offset: Adjusts the blue colour darkness. R-Gain: Adjusts the red colour brightness. G-Gain: Adjusts the green colour brightness. B-Gain: Adjusts the blue
colour brightness. Reset: The previously adjusted white balance will be reset to the factory defaults. Flesh Tone You can emphasize the pink `flesh tone' in the
picture. N Changing the adjustment value will refresh the adjusted screen. EdgeEnhancementOff/On You can emphasize object boundaries in the picture.
xvYCCOff/On Setting the xvYCC mode to on increases detail and colour space when watching movies from an external device (ie. DVD player) connected to
the HDMI or Component IN jacks.
N xvYCC is available when the picture mode is set to Movie, and the external input is set to HDMI or Component mode. English - 1 Picture Options N In PC
mode, you can only make changes to the Colour Tone and Size from among the items in Picture Options. PictureOptions ColourTone Size ScreenMode
DigitalNR HDMIBlackLevel FilmMode 100HzMotionPlus :Normal :AutoWide :16:9 :Auto :Normal :Off :Standard UMoveEEnterRReturn
ColourToneCool/Normal/Warm1/Warm2/Warm3 N Warm1, Warm2 or Warm3 is only activated when the picture mode is Movie. N Settings can be adjusted
and stored for each external device you have connected to an input of the TV. Size Occasionally, you may want to change the size of the image on your screen.
Your TV comes with several screen size options, each designed to work best with specific types of video input. Your cable box/satellite receiver may have its
own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible. T Press the TOOLS button to display the Tools
menu. You can also set the size by selecting ToolsPictureSize.
Auto Wide: Automatically adjusts the picture size to the 1:9 aspect ratio. 1:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size. 4:3: This is
the default setting for a video movie or normal broadcasting.
Screen Fit: Use the function to see the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are input. N
Depending on the input source, the picture size options may vary. N The items available may differ depending on the selected mode. N In PC Mode, only 1:9
and 4:3 mode can be adjusted. N Settings can be adjusted and stored for each external device you have connected to an input of the TV.
N Temporary image retention may occur when viewing a static image on the set for more than two hours. N Wide Zoom: Press the button to Select Position,
then press the ENTERE button. Press the or button to move the picture up / down. Then press the ENTERE button. N Zoom: Press the button to Select
Position, then press the ENTERE button. Press the or button to move the picture up and down. Then press the ENTERE button. Press the button to Select Size,
then press the ENTERE button. Press the or button to magnify or reduce the picture size in the vertical direction. Then press the ENTERE button.
N After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressing the or button. Use the , , or button to
move the picture. Reset: Press the or button to select Reset, then press the ENTERE button. You can initialize the setting. N If you use the Screen Fit function
with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the Overscan function. N When Double (, OE) mode has been set in PIP, the
Picture Size cannot be set. ScreenMode16:9/WideZoom/Zoom/4:3 When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture
size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is
intended for users to select it. 1:9: Sets the picture to 16:9 wide mode. Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnify the size of the picture vertically on screen. 4:3: Sets the picture to 4:3 normal mode. N This function is available in Auto Wide mode. N This
function is not available in PC, Component or HDMI mode. DigitalNROff/Low/Medium/High/Auto If the broadcast signal received by your TV is weak, you
can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.
N When the signal is weak, select one of the other options until the best picture is displayed. HDMIBlackLevelNormal/Low You can select the black level on
the screen to adjust the screen depth. N This function is active only when an external device is connected to the TV via HDMI (RGB signals). English - 1
FilmModeOff/Auto1/Auto2 The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality. N
Film Mode is supported in TV, AV, COMPONENT(480i / 1080i) and HDMI(480i / 1080i).
Off: Turn the Film Mode function off. Auto1: Automatically adjusts the picture for the best quality when watching a film. Auto2: Automatically optimizes the
video text on the screen (not including closed captions) when watching a film. 100HzMotionPlusOff/Clear/Standard/Smooth/Custom/Demo Removes drag
from fast scenes with a lot of movement to provide a clearer picture. N If you enable 100 Hz Motion Plus, noise may appear on the screen. If this occurs, set
100Hz Motion Plus to Off. Off: Switches 100Hz Motion Plus off. Clear: Sets 100Hz Motion Plus to minimum.
You're reading an excerpt. Click here to read official SAMSUNG
LE37B650 user guide
http://yourpdfguides.com/dref/2569577
Standard: Sets 100Hz Motion Plus to medium. Smooth: Sets 100Hz Motion Plus to maximum.
Custom: Adjusts the blur and judder reduction level to suit your preference. Blur Reduction: Adjusts the blur reduction level from video sources. Judder
Reduction: Adjusts the judder reduction level from video sources when playing films. Reset: Reset the custom settings. Demo: Displays the difference between
100Hz Motion Plus on and off modes. BlueOnlyModeOff/On This function is for AV device measurement experts. This function displays the blue signal only
by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment
such as DVD players, Home Theatres, etc. Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal level of each
video device using the Red / Green / Blue / Cyan / Magenta / Yellow Colour Bar Patterns, without using an additional Blue Filter. N Blue Only Mode is
available when the picture mode is set to Movie or Standard. PictureResetResetPictureMode/Cancel Resets all picture settings to the default values.
N Reset Picture Mode: Current picture values return to default settings. English - 1 Viewing Picture-in-Picture You can use the PIP feature to simultaneously
watch the TV tuner and one external video source. This product has one built-in tuner, which does not allow PIP to function in the same mode. Please see
`PIP Settings' below for details. T Press the TOOLS button to display the Tools menu.
You can also configure PIP related settings by selecting ToolsPIP. N If you select the PIP picture sound, refer to the `Configuring the Sound Menu'
instructions. N PIP Settings Main picture Component HDMI1, HDMI2, HDMI3/DVI, HDMI4 PC Sub picture TV Melody EnergySaving :Medium :Off N If you
turn the TV off while watching in PIP mode and turn it on again, the PIP window will disappear. N You may notice that the picture in the PIP window
becomes slightly unnatural when you use the main screen to view a game or karaoke. N While Internet@TV is in operation, the PIP function cannot be used.
Setup PIP CommonInterface PIPOff/On You can activate or deactivate the PIP function. PIP Size Position Channel PIP :On : : :ATV4 Size / / / OE You can
select a size of the sub-picture. Position / / -- / oe You can select a position of the sub-picture. N In Double (OE, ) mode, Position cannot be selected.
UMoveEEnterRReturn Channel You can select the channel for the sub-screen. English - 1 Using Your TV as a Computer (PC) Display Setting Up Your PC
Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be
different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same
basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1.
First, click on `Control Panel' on the Windows start menu. 2. When the control panel window appears, click on `Appearance and Themes' and a display
dialog-box will appear. 3. When the control panel window appears, click on `Display' and a display dialogbox will appear. 4. Navigate to the `Settings' tab on
the display dialog-box. The correct size setting (resolution) - Optimum: 1920 X 1080 pixels If a vertical-frequency option exists on your display settings
dialog box, the correct value is `60' or `60 Hz'. Otherwise, just click `OK' and exit the dialog box. Display Modes If the signal from the system equals the
standard signal mode, the screen is adjusted automatically.
If the signal from the system doesn't equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no
video. For the display modes listed on the next page, the screen image has been optimized during manufacturing. D-Sub and HDMI/DVI Input Mode IBM
MAC VESA CVT Resolution 640 x 350 720 x 400 640 x 480 832 x 624 1152 x 870 720 x 576 1152 x 864 1280 x 720 1280 x 720 1280 x 960 640 x 480 640 x
480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1280 x 800 1280 x 800 1280 x 960
1360 x 768 1440 x 900 1440 x 900 1680 x 1050 1280 x 720 1280 x 1024 1920 x 1080p Horizontal Frequency (KHz) 31.469 31.469 35.
000 49.726 68.681 35.910 53.783 44.
772 56.456 75.231 31.469 37.861 37.500 37.879 48.077 46.875 48.363 56.
476 60.023 67.500 63.981 79.976 49.702 62.795 60.000 47.712 55.935 70.
635 65.290 52.500 74.620 67.500 Vertical Frequency (Hz) 70.
086 70.087 66.667 74.551 75.062 59.
950 59.959 59.855 74.777 74.857 59.940 72.809 75.000 60.317 72.188 75.
000 60.004 70.069 75.029 75.000 60.020 75.025 59.810 74.934 60.000 60.
015 59.887 74.984 59.954 70.000 70.
000 60.000 Pixel Clock Frequency (MHz) 25.175 28.322 30.240 57.
284 100.000 32.750 81.750 74.500 95.750 130.000 25.175 31.500 31.500 40.
000 50.000 49.500 65.000 75.000 78.750 108.000 108.000 135.000 83.500 106.
500 108.000 85.500 106.500 136.750 146.
250 89.040 128.943 148.500 Sync Polarity (H / V) +/-/+ -/-/-/-/+ -/+ -/+ -/+ -/+ -/-/-/+/+ +/+ +/+ -/-/+/+ +/+ +/+ +/+ -/+ -/+ +/+ +/+ -/+ -/+ -/+ -/+
-/+/+ VESA DMT VESA GTF VESA DMT / DTV CEA N N N N N When using an HDMI / DVI cable connection, you must use the HDMI IN 3(DVI) jack. The
interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected. Separate and Composite modes are supported. SOG is not supported. Too long
or low quality VGA cable can cause picture noise at high resolution modes (1920x1080). English - 19 Setting up the TV with your PC N Preset: Press the
SOURCE button to select PC mode. Auto Adjustment Use the Auto Adjust function to have the TV automatically adjust the video signals it receives. The
function also automatically fine-tunes the settings and adjusts the frequency values and positions. T Press the TOOLS button to display the Tools menu. You
can also set the Auto Adjustment by selecting ToolsAutoAdjustment. N This function does not work in DVI-HDMI mode.
Picture Brightness Sharpness :45 :50 AutoAdjustment Screen AdvancedSettings PictureOptions PictureReset Screen Coarse / Fine The purpose of picture
quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible
(Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on the centre of screen. PC Position Adjust the PC's
screen positioning if it does not fit the TV screen. Press the or button to adjusting the Vertical-Position. Press the or button to adjust the Horizontal-Position.
Image Reset You can replace all image settings with the factory default values. Screen Coarse Fine PCPosition ImageReset 50 0 UMoveEEnterRReturn
SOUND Configuring the Sound Menu ModeStandard/Music/Movie/ClearVoice/Custom T Press the TOOLS button to display the Tools menu.
You're reading an excerpt. Click here to read official SAMSUNG
LE37B650 user guide
http://yourpdfguides.com/dref/2569577
You can also set the sound mode by selecting ToolsSoundMode. Standard: Selects the normal sound mode.
Music: Emphasizes music over voices. Movie: Provides the best sound for movies. Clear Voice: Emphasizes voice over other sounds. Custom: Recalls your
customized sound settings. Sound Mode Equalizer SRSTruSurroundHD AudioLanguage AudioFormat AudioDescription AutoVolume SpeakerSelect :Custom
:Off :---:---:Off :TVSpeaker Equalizer The sound settings can be adjusted to suit your personal preferences.
Mode: Selects the sound mode among the predefined settings. Balance L/R: Adjusts the balance between the right and left speaker. 100Hz / 300Hz / 1KHz /
3KHz / 10KHz (Bandwidth Adjustment): To adjust the level of different bandwidth frequencies. Reset: Resets the equalizer settings to the default values.
SRSTruSurroundHDOff/On SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.
1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all multichannel formats. T Press the TOOLS button to display the Tools menu. You can also
set the SRS TruSurround HD by selecting ToolsSRSTS HD. English - 20 Audio Language You can change the default value for audio languages. Displays the
language information for the incoming stream. N While viewing a digital channel, this function can be selected. N You can only select the language among the
actual languages being broadcast. AudioFormatMPEG/DolbyDigital When sound is emitted from both the main speaker and the audio receiver, a sound echo
may occur due to the decoding speed difference between the main speaker and the audio receiver.
In this case, use the TV Speaker function. N While viewing a digital channel, this function can be selected. N The Audio Format appears according to the
broadcasting signal. Audio Description This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This
function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the Audio
Description On or Off and control the volume. AudioDescriptionOff/On Turn the audio description function on or off. Volume You can adjust the audio
description volume. N Volume is active when Audio Description is set to On. N While viewing a Digital channel, this function can be selected.
AutoVolumeOff/On Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This
feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low. Speaker Select When you watch TV with it connecting to a Home theatre, turn the TV speakers off so you can
listen to sound from the Home theatre's (external) speakers. External Speaker: Used to listen to the sound of the External (Home Theatre) Speakers. TV
Speaker: Used to listen to the sound of the TV Speakers.
N The volume and MUTE buttons do not operate when the Speaker Select is set to External Speaker. N If you select External Speaker in the Speaker Select
menu, the sound settings will be limited TV's Internal Speakers RF / AV / Component / PC / HDMI Speaker Output Mute Mute Audio Out (Optical, L/R Out) to
Sound System RF / AV / Component / PC / HDMI Sound Output Sound Output Mute TV Speaker External Speaker Video No Signal SoundSelectMain/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. N You can select this option when PIP is set to On. T Press the TOOLS
button to display the Tools menu. You can also set the sound of the sub picture by selecting ToolsPIP SoundSelect.
SoundResetResetAll/ResetSoundMode/Cancel You can restore the Sound settings to the factory defaults. N Reset Sound Mode: Current sound values return to
default settings. Cancelsoundreset. SoundReset ResetAll ResetSoundMode Cancel LMoveEEnterRReturn English - 21 Selecting the Sound Mode You can set
the sound mode in the Tools menu. When you set to Dual l ll, the current sound mode is displayed on the screen. Audio Type Mono Stereo Dual Mono Stereo
Dual Dual 1 / 2 MONO STEREO MONO DUAL 1 DUAL 2 MONO MONO STEREO MONO DUAL 1 DUAL 2 Default Automatic change DUAL 1 Automatic
change DUAL 1 A2 Stereo NICAM Stereo N If the stereo signal is weak and an automatic switching occurs, then switch to the mono. N This function is only
activated in stereo sound signal. It is deactivated in mono sound signal. N This function is only available in TV mode. SETUP Configuring the Setup Menu
Language You can set the menu language.
Plug&Play Setup Language Time GameMode BDWise NetworkType NetworkSetup ChildLock ChangePIN :English :Off :Off :Cable :On Time For detailed
procedures on setting up options, refer to the `Setting the Time' instructions. GameModeOff/On When connecting to a game console such as PlayStationTM or
XboxTM, you can enjoy a more realistic gaming experience by selecting game menu. N Restrictions on game mode (Caution) To disconnect the game console
and connect another external device, set Game Mode to Off in the setup menu. If you display the TV menu in Game Mode, the screen shakes slightly. N Game
Mode is not available in regular TV, PC and Ext mode. N While PIP is in operation, the Game Mode function cannot be used. N If the picture is poor when
external device is connected to TV, check if Game Mode is On. Set Game Mode to Off and connect external devices. N If Game Mode is On: Picture mode is
automatically changed to Standard and cannot be changed. Sound mode is automatically changed to Custom and cannot be changed.
Adjust the sound using the equalizer. The Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer settings
to the factory defaults. BDWiseOff/On Provides the optimal picture quality for SAMSUNG DVD, Blu-ray and Home Theatre products which support BD Wise.
You can enjoy a richer picture when using them connected to this Samsung TV.
N Connect SAMSUNG products that have BD Wise using an HDMI cable. N When the BD Wise set to On, the picture mode is automatically changed to the
optimal resolution. N BD Wise is available in HDMI mode. Network Type / Network Setup For detailed procedures on setting up options, refer to the `Setting
the Network' instructions. English - 22 ChildLockOff/On This feature allows you to prevent unauthorized users, such as children, from watching unsuitable
programme by muting out video and audio.
N Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number. N The default PIN number of a new TV set is
0-0-0-0.
You're reading an excerpt. Click here to read official SAMSUNG
LE37B650 user guide
http://yourpdfguides.com/dref/2569577
You can change the PIN by selecting Change PIN from the menu. N You can lock some channels in Channel List. N Child Lock is available only in TV mode.
Change PIN You can change your personal ID number that is required to set up the TV. N Before the setup screen appears, the PIN number input screen
appears. Enter your 4 digit PIN number. N The default PIN number of a new TV set is 0-0-0-0.
N If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to 0-0-0-0: POWER (Off) MUTE824POWER
(On). ParentalLockParentalRating This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by a 4-digit
PIN (Personal Identification Number) code that is defined by the user. N The Parental Rating item differs depending on the country. N Before the setup screen
appears, the PIN number input screen appears. Enter your 4 digit PIN number. N The default PIN number of a new TV set is `0-0-0-0'. You can change the
PIN by selecting Change PIN from the menu. N When the parental ratings are set, the `\' symbol is displayed. N Allow All: Press to unlock all TV ratings.
Block All: Press to lock all TV ratings.
Subtitle You can activate and deactivate the subtitles. Use this menu to set the Subtitle Mode. Normal under the menu is the basic subtitle and Hard of hearing
is the subtitle for a hearing-impaired person. SubtitleOff/On Switches subtitles on or off. ModeNormal/Hardofhearing Sets the subtitle mode.
Subtitle Language Set the subtitle language. N If the programme you are watching does not support the Hard of hearing function, Normal automatically
activates even though Hard of hearing mode is selected. N English is the default in cases where the selected language is unavailable in the broadcast. O You
can select these options simply by pressing the SUBT. button on the remote control.
Teletext Language You can set the Teletext language by selecting the language type. N English is the default in cases where the selected language is
unavailable in the broadcast. Preference Primary Audio Language / Secondary Audio Language / Primary Subtitle Language / Secondary Subtitle Language /
Primary Teletext Language / Secondary Teletext Language Using this feature, users can select one of the languages. The language selected here is the default
when the user selects a channel. If you change the language setting, the Subtitle Language, Audio Language, and the Teletext Language of the Language
menu are automatically changed to the selected language. The Subtitle Language, Audio Language, and the Teletext Language of the Language menu show a
list of languages supported by the current channel and the selection is highlighted. If you change this language setting, the new selection is only valid for the
current channel. The changed setting does not change the setting of the Primary Subtitle Language, Primary Audio Language, or the Primary Teletext
Language of the Preference menu. English - 23 DigitalTextDisable/Enable If the programme is broadcast with digital text, this feature is enabled. N MHEG
(Multimedia and Hypermedia Information Coding Experts Group) An International standard for data encoding systems used in multimedia and hypermedia.
This is at a higher level than the MPEG system which includes data-linking hypermedia such as still images, character service, animation, graphic and video
files as well as multimedia data. MHEG is user runtime interaction technology and is being applied to various fields including VOD (Video-On-Demand), ITV
(Interactive TV), EC (Electronic Commerce), tele-education, tele-conferencing, digital libraries and network games. MelodyOff/Low/Medium/High A melody
sound can be set to come on when the TV is powered On or Off. N The Melody does not play When no sound is output from the TV because the MUTE button
has been pressed. When no sound is output from the TV because the volume has been reduced to minimum with the volum (-) button. When the TV is turned off
by Sleep Timer function. Energy Saving Off/Low/Medium/High/Auto This feature adjusts the brightness of the TV in order to reduce power consumption.
When watching TV at night, set the Energy Saving mode option to High to reduce eye fatigue as well as power consumption. T Press the TOOLS button to
display the Tools menu. You can also set the Energy Saving option by selecting Tools Energy Saving.
PIP For detailed procedures on setting up options, refer to the `Viewing Picture-in- Picture' instructions. Common Interface CI Menu This enables the user to
select from the CAM-provided menu. Select the CI Menu based on the menu PC Card. Application Info. This contains information on CAM inserted in the CI
slot and displays it.
The Application Info inserting is about the CI CARD. You can install the CAM anytime whether the TV is ON or OFF. 1. Purchase the CI CAM module by
visiting your nearest dealer or by phone. 2.
Insert the CI CARD into the CAM in the direction of the arrow until it fits. 3. Insert the CAM with the CI CARD installed into the common interface slot.
(Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.) 4. Check if you can see a picture on a scrambled signal
channel. Setting the Time Clock Setting the clock is necessary in order to use the various timer features of the TV. O The current time will appear every time
you press the INFO button. N If you disconnect the power cord, you have to set the clock again. Setup Plug&Play Language :English Time GameMode
BDWise NetworkType NetworkSetup ChildLock ChangePIN ParentalLock :Off :On :Cable :On Clock Mode You can set up the current time manually or
automatically.
Auto: Set the current time automatically using the time from the digital broadcast. Manual: Set the current time to a manually specified time. N Depending on
the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time manually. N The Antenna or cable must be connected in
order to set the time automatically. Time Clock SleepTimer Timer1 Timer2 Timer3 :--:-- :Off :Inactivated :Inactivated :Inactivated UMoveEEnterRReturn
English - 24 Clock Set You can set the current time manually. N This function is only available when Clock Mode is set to Manual. N You can set the day,
month, year, hour and minute directly by pressing the number buttons on the remote control. Sleep Timer The sleep timer automatically shuts off the TV after
a preset time (30, 60, 90, 120, 150 and 180 minutes). T Press the TOOLS button to display the Tools menu.
You can also set the sleep timer by selecting ToolsSleepTimer. N To cancel the Sleep Timer function, select Off. Timer 1 / Timer 2 / Timer 3 Three different on
/ off timer settings can be made. You must set the clock first. Timer1 OnTime 00 00 00 Inactivate Inactivate OffTime 00 On Time Set the hour, minute, and
activate / inactivate.
You're reading an excerpt. Click here to read official SAMSUNG
LE37B650 user guide
http://yourpdfguides.com/dref/2569577
(To activate timer with the setting you've chosen, set to Activate.) Off Time Set the hour, minute, and activate / inactivate. (To activate timer with the setting
you've chosen, set to Activate.) Volume Set the desired volume level. Volume 10 Source TV Antenna ATV Channel 0 Repeat Once Sun Mon Tue Wed Thu Fri
Sat LMoveUAdjustEEnterRReturn SourceTV/USB/TVMemory You can select the TV, TV Memory or USB device content to be played when the TV turns on
automatically.
Select TV, TV Memory or USB. (Make sure that an USB device is connected to your TV.) N When there is only one photo file in the USB or the TV Memory,
the Slide Show will not play. Antenna (when Source is set to TV) Select ATV or DTV. Channel (when Source is set to TV) Select the desired channel. Contents
(when Source is set to USB or TV Memory) You can select a folder on the USB Device/TV Memory with music or photo files to be played when the TV turns
on automatically. N If the folder name is too long, the folder can not be selected. N If you are using two of the same type USB device, be sure the folder names
are different so the correct USB is read. Repeat Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. N When Manual is selected, press the button
to select the desired day of the week.
Press the ENTERE button over the desired day and the c mark will appear. N You can set the hour, minute and channel by pressing the number buttons on the
remote control. N Auto Power Off When you set the timer on, the television will eventually turn off, if no controls are operated for 3 hours after the TV was
turned on by the timer. This function is only available in timer on mode and prevents overheating, which may occur if a TV is on for too long time. English - 2
Network Connection You can set up the Internet Protocol so that you can communicate with various connected networks. Network Connection - Cable LAN
Connection for a DHCP Environment The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described below. Since
an IP address, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter them manually. 1. Connect the
LAN port on the rear panel of the TV and the external modem with a LAN Cable. 2.
Connect the Modem port on the wall and the external modem with a Modem Cable. The Modem Port on the Wall External Modem (ADSL / VDSL / Cable TV)
TV Rear Panel 2 Modem Cable 1 LAN Cable You can connect the LAN via a Sharer (Router). The Modem Port on the Wall External Modem (ADSL / VDSL /
Cable TV) TV Rear Panel IP Sharer Modem Cable LAN Cable LAN Cable You can connect the LAN port and the TV directly depending on your network
status. The LAN Port on the Wall TV Rear Panel LAN Cable N The terminals (the position of the port and the type) of the external device may differ
depending on the manufacturer. N If the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on again after at least 10
seconds and then try again.
N For the connections between the external modem and the Sharer (Router), refer to the owner's manual of the corresponding product. N You can connect the
TV to the LAN directly without connecting it through a Sharer (Router) N You cannot use a manual-connection-type ADSL modem because it does not support
DHCP. You have to use an automaticconnection-type ADSL modem. English - 2 LAN Connection for Static IP Environment The procedures to set up the
network using a static IP address are described below. You have to manually enter the IP address, subnet mask, gateway, and DNS that are provided by your
Internet Service Provider (ISP).
1. Connect the LAN port on the rear panel of the TV and the LAN port on the wall using the LAN cable. The LAN Port on the Wall TV Rear Panel 1 LAN
Cable You can connect the LAN via a Sharer (Router). The LAN Port on the Wall IP Sharer TV Rear Panel LAN Cable LAN Cable N The terminals (the
position of the port and the type) of the external device may differ depending on the manufacturer. N If you are using a static IP address, your ISP will inform
you of the IP address, subnet mask, gateway, and DNS. You must enter these values to complete the network settings. If you do not know the values, ask your
network administrator. N For the information on how to configure and connect a Sharer (Router), refer to the owner's manual for the corresponding product.
N You can connect the TV to the LAN directly without connecting it through a Sharer (Router). N If you use an IP Sharer (IP Router) that supports DHCP,
you can set up the device as either DHCP or static IP.
N For the procedures to use a static IP address, ask your Internet Service Provider. English - 2 Network Connection - Wireless You can connect to the
network wirelessly through a wireless IP sharer. TV Side Panel The LAN Port on the Wall Wireless IP sharer Samsung Wireless LAN Adapter LAN Cable or
1. Connect the `Samsung Wireless LAN Adapter' into the USB1(HDD) or USB2 terminal of the TV. N You must use the `Samsung Wireless LAN
Adapter'(WIS09ABGN) to use a wireless network. N Samsung's Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by
select retailers, Ecommerce sites and Samsungparts.com. N To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP
sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.
N Samsung's Wireless LAN adapter supports IEEE 802.11A, IEEE 802.11B, IEEE 802.11G, IEEE 802.11N.
When you play DLNA video over IEEE 802.11B/G connection, the video may not be played smoothly. N If the wireless IP sharer allows you to turn the Ping
connection function on/off, turn it on. N Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP
sharer is currently being used by another device nearby, this will result in interference and communications may fail.
N If you apply a security system other than the systems listed blow, it will not work with the TV. When applying the security key for the AP (wireless IP
sharer), only the following is supported. 1) Authentication Mode : OPEN, SHARED, WPAPSK, WPA2PSK 2) Encryption Type : WEP, TKIP, AES When
applying the security key for the Ad-hoc mode, only the following is supported. 1) Authentication Mode : SHARED, WPANONE 2) Encryption Type : WEP,
TKIP, AES N If your AP supports WPS(Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN (Personal
Indentification Number). WPS will automatically configure the SSID and WPA key in either mode. N If the device isn't certified, it may not connect to the TV
via the `Samsung Wireless LAN Adapter'. English - 2 Setting the Network Network Type Select Cable or Wireless as the method to connect to the network.
You're reading an excerpt. Click here to read official SAMSUNG
LE37B650 user guide
http://yourpdfguides.com/dref/2569577
Powered by TCPDF (www.tcpdf.org)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising