MAX4 3.5`` Combo enclosure»¡©ú®Ñ_06040401.cdr

MAX4 3.5`` Combo enclosure»¡©ú®Ñ_06040401.cdr
P/N:N0003US
SATA
USB 2.0
SATA
eSATA
User's Manual
C 2005 Thermaltake Technology Co.,Ltd. All Rights Reserved. 2006.3
All other registered trademarks belong to their respective companies.
eSATA & USB2.0 COMBO 3.5"
Urban style
- application for 3.5" SATA HDD
MAX4 3.5"
Content
>> User's Manual
Content
Part I - Introduction
User's Manual
1.1 Overview
P.2
1.2 Components check
P.2
1.3 Features
P.3
1.4 Technology Specification
P.3
1.5 System Requirement
P.3
1.6 Appearance
P.4
eSATA & USB2.0 COMBO 3.5"
- application for 3.5" SATA HDD
Part II - Installation
2.1 Hardware Installation
P.6
2.2 eSATA Installation
P.8
2.3 USB Installation
P.9
2.4 Software Installation
P.10
MAX4 3.5"
>> User's Manual
Introduction
1.1 Overview
Thank you for purchasing Thermaltake's latest Intelligent
Storage System: MAX4 3.5" eSATA USB2.0 combo enclosure.
Thermaltake formed a new division to further engineer and
develop new solutions to redefine reliability, portability,
class and elegance.
MAX4 Series Enclosures are completely manufactured with
Aluminum that is able to transfer heat away from the source
and dissipate silently through natural convection. With DA
Meter indicates the data transfer signal and blue LED back
light shining cold blue. Users feel conveniently with
excellent screwless design.
Part I
Introduction
1
1
Users can enjoy the reliability and compatibility of data
transfer or backup. Plug and Play, and Vertical stand, make
the drive look better it saves space.
1.2 Components Check
3.5" External Box
eSATA cable
USB cable
Foot stand
Power adapter
eSATA extended
PCI bracket
2
Introduction
Introduction
1.6 Appearance
1.3 Features
1.Supporting eSATA & USB2.0 interface
a
- the best performance & convenience.
2.Application for 3.5" SATA HDD.
b
eSATA Extended
PCI bracket
3.LED for power and disk activitly.
4.Made by Aluminum body for thermal solution.
5.Compact mount easily to stand.
6.Transfer speed up to eSATA-3Gbps & USB2.0 -480Mbps.
7.Compact mount easily to stand.
1.4 Technology Specification
P/N
N0003US
Application
3.5"SATA HDD
Weight
425g
Dimension
215 X 134 X 30 mm
Material
Aluminum & Plastic
Interface
SATA to eSATA & USB2.0 combo
e
f
ATA compatibility
SATAII
Transfer rate
up to SATAII 3Gbps/ USB2.0 480Mbps
Compatiable system
Mac OS 9.04 up/ Windows SE/ ME/ 2000/ XP
Accessories
d
c
SATAI
g
eSATA external cable
USB cable
SATA to eSATA PCI bracket
Power adapter
1.5 System Requirement
Note:Your motherboard's chipset may have to support SATA2 hot-plug if you want to
enable the hot-plug function.
The following chips support hot-plug:Intel ICH6R ICH7R VIA 8237R
NVIDIA Nforce series ATI series SiliconImage SIS ULI or any support AHCI hotplug function.
3
1
a
SATA Cable
e
b
eSATA port
eSATA Port
f
Power port
c
d
LED light
g
USB port
Power Switch
4
Installation
2.1 Installation
Part II
Installation
1
Remove the 4 screws of
upper part.
2
Separate the upper part of MAX4.
3
Using screw driver
to remove the
fixed-support then
insert it to the HDD
side holes.
fixed-support
4
5
1
Fix the
fixed-support
in the lower part.
6
Installation
Installation
2.2 eSATA Installation
5
Plug the 3.5" SATA HDD
into the PCB.
If your motherboard or case including eSATA port,
please connect by eSATA cable directly.
1
6
Put the upper cover on.
2
7
Connect the SATA connector of the
extended bracket to the motherboard's
SATA port.
Screw the upper cover back.
3
7
1
Install the eSATA PCI extended
bracket to the chassis.
Connect the eSATA cable from
PCI bracket to enclosure.
8
1
Installation
4
Connect the Power cable from
Power adapter to enclosure
then turn on the power.
Installation
2.4 Software Installation
Windows 98/ 98SE
(1) Insert driver CD into the CD-ROM drive
(2) Plug USB cable into USB port and system will detect it
2.3 USB Installation
1
Connect the USB cable from
PC's USB port to enclosure.
(3) System will ask for driver, Please follow the instruction step by step
accordingly
2
9
1
Connect the Power cable from
Power adapter to enclosure
then turn on the power.
10
Installation
Installation
Remove the device
Windows 98/ SE
Before you remove your device please wait for "Access
LED" on reader stops blinking to avoid data loss
Windows ME/ 2000/ XP
(1)Please double-click the icon
on the system tray
(2)A dialog box will appear, Double-click the Storage
Device to remove the device to avoid loss
(Driver path: Select from the sub-menu under the
"Windows98Driver" from the attached CD)
Mac OS
Users can remove the cable of Device after putting the icon
Of device on the desktop into the trash bin
Windows ME/ 2000/ XP
The system already provides the support for the software
(Please do not install again unless necessary)
Software Installation on MAC
MAC OS 9.X/ 10.X
The system already provides the support for the software
11
1
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising