RS 110 II - Product Review
RS 110 II
Quick Guide
Consignes de sécurité
Indicaciones de seguridad
Guia de Segurança
Sicherheitshinweise
Guida per la sicurezza
Veiligheidsgids
1
2
3
standard batteries
AAA 1.5 V
4
5
6
Delivery includes
HDR 110 II headphones
EN
TR 110 II transmitter with
audio connection cable
ES
FR
SA103K-09G/NT9-3A (EU) mains unit
(for EU market only)
SA103K-09B/NT9-3A (UK) mains unit
(for UK market only)
Batteries, AAA size, 1.5 V
Quick Guide
DE
Quick
Guide
PT
Adapter, 1/4“ (6.3 mm)
IT
Safety Guide
JP
The diagrams corresponding to the chapter headings
can be found on the fold-out page.
NL
Safety
Guide
1
Preparing the transmitter for use
The transmitter is prepared for wall mounting (recess at the
rear of the transmitter). The required mounting material
(screws and plugs) is not included in the delivery.
Connecting the transmitter to an audio output of
your audio source
왘 Choose a suitable place near your audio source (e.g. TV,
stereo or home cinema system). Avoid placing the transmitter close to metal objects such as shelf bars, reinforced
concrete walls, etc. as this can decrease the transmitter’s
range.
왘 Connect the transmitter‘s audio connection cable:
• either directly to the headphone socket or
• to the 1/4“ (6.3 mm) adapter and a corresponding
headphone socket.
왘 Set the volume for the headphone output of your audio
source to a medium level. If the headphone output volume is set too low, the transmitter automatically switches
off.
Some TVs have a function that mutes the TV loudspeakers when you connect a transmitter. If necessary, change this setting via the operating menu of
your TV.
1
Connecting the transmitter to the mains
왘 Connect the mains unit to the socket at the rear of the
transmitter. Plug the mains unit into a wall socket. The
transmitter switches on and the ON/OFF LED lights up
green.
Preparing the headphones for use
2
Opening the battery compartments
왘 Turn the ear pads in the direction of the arrow until you
overcome a slight resistance and lift them off the ear
cups.
3
Inserting and replacing the batteries
왘 Insert the supplied batteries. Secure the ear pads to the
ear cups.
2
Using the RS headphone system
4
Switching on the audio source
왘 Switch on the audio source. The transmitter automatically
switches on and off together with the audio source. The
ON/OFF LED lights up green.
5
Switching on the headphones/adjusting the volume
왘 Switch on the headphones and set the volume to the
EN
왘 First, set the volume on the headphones to a low level.
desired level.
6
FR
왘 Switch off the headphones after use to save battery power.
Optimizing the reception
PT
DE
IT
headphones.
However, if reception is subject to interference:
왘 Change the transmission channel by setting the switch
at the bottom of the transmitter to another position and
re-adjust the receiver channel with the TUNE control on
the headphones. Some electronic devices (e.g. televisions) can cause interference to your wireless headphone
system. If this happens, increase the distance between
the transmitter and the interference source.
ES
왘 Adjust the receiver channel with the TUNE control on the
NL
Specifications and
Frequently Asked Questions (FAQs)
JP
왘 Visit our website at www.sennheiser.com.
3
Manufacturer declarations
Warranty
Sennheiser electronic GmbH & Co. KG gives a warranty of
24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or
contact your Sennheiser partner. Before putting the product
into operation, please observe the respective country specific regulations.
In compliance with the essential requirements and other
relevant provisions of the following Directives:
• RoHS Directive (2002/95/EC)
• WEEE Directive (2002/96/EC)
Please dispose of this product by taking it to your
local collection point or recycling center for such
equipment.
• Battery Directive (2006/66/EC)
Please dispose of the batteries as special waste
or return them to your specialist dealer. In order
to protect the environment, only dispose of
exhausted batteries.
CE Declaration of Conformity
• R&TTE Directive (1999/5/EC)
• EMC Directive (2004/108/EC)
• Low Voltage Directive (2006/95/EC)
• EuP Directive (2005/32/EC)
The CE Declaration of Conformity is available on our website
at www.sennheiser.com.
In compliance with:
Europe/UK
4
RS 120 II
RS 115 II
RS 119 II
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany
www.sennheiser.com
Printed in China, Publ. 04/11, 545190/A01
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising