Parallel bandraster ceilings
i n t e r n a t i o n a l
s p e c i a l i s t s
i n
m e t a l
c e i l i n g
s y s t e m s
The Planostile parallel bandraster ceiling
is based on an exposed C-profile manufactured specifically for each project.
A concealed primary grid at right angles
maintains the ceilings rigidity. The ceiling module is completely flexible and is
determined by the centres of the
bandrasters.
System G 2000 is a single size
bandraster profile, stocked in a module
width of 100 mm and standard lengths
of 3,600, 3,750, 6,000 mm manufactured
from 0.7 mm galvanized steel to a
standard height of 36 mm.
System LG 100 is a variable size
bandraster profile, available in standard
module widths of 100, 125, or 150 mm,
manufactured from 1.0 mm galvanized
steel, to a standard height 30 mm,
maximum length 3,600 mm, the system
has its own combined splice.
35.6
Bandraster
100
Suspension system G 2000 Bandraster
supported by nonius hangers
Clip-in bandraster system
construction CC
10
40.5
78
27
System LG 1601/89
is a variable size
bandraster profile, stocked in standard
module widths of 100, 125, or 150 mm
and standard lengths of: 4,000,
5,000,
Bandraster
or 6,000 mm, manufactured from 1.25
mm galvanized steel to a standard height
30 mm. Other lengths Bandrasterbreite
and widths
available on request.
Clip-in-bandraster system is a variable
size bandraster profile, manufactured
from 0.7 mm galvanized steel, maximum
length 3,000 mm.
Suspension system LG 100 – LG 160
Bandraster supported from primary
angle runner
Suspension system LG 100 – LG 160
Bandraster supported by hangers
3.2 Parallel bandraster ceilings
Parallel bandraster ceilings
s p e c i a l i s t s
i n
m e t a l
c e i l i n g
s y s t e m s
-Maximum panel width 1,160 mm.
-Can be combined with other ceiling
systems.
-Available in numerous configurations.
-Easy to integrate with corridor panels.
-Provides level difference.
-Rigid construction for installation of
partitions.
-Can be used for vertical, as well as
horizontal, sound isolation.
-Easy integration of light fixtures,
ventilation grilles, etc.
- Suitable for all chilled ceiling systems.
- For details of the various Accessible/
Swing ceiling systems available, see
sections 4.1.3 to 4.1.7.
02.09 • We reserve the right to change specifications without prior notice.
i n t e r n a t i o n a l
i n t e r n a t i o n a l
s p e c i a l i s t s
i n
m e t a l
c e i l i n g
s y s t e m s
Parallel and cross bandraster ceilings
System G 2000, module width 100 mm.
35,6
Parallel bandraster ceiling system
Cross bandraster ceiling system
3.2.1 Parallel and cross bandraster
ceilings System G 2000
100,5
s p e c i a l i s t s
Details and components
Bandraster ceiling system G 2000
i n
m e t a l
c e i l i n g
s y s t e m s
Bandraster
6.6
10
i n t e r n a t i o n a l
35.6
Bandraster profile 100,5 mm width x 36 mm height, stocked
in standard lengths of 3,600, 3,750 mm and 6,000 mm.
Other lengths available on request.
For details of the various Accessible/Swing ceiling systems
available, see sections 4.1.3 to 4.1.7.
100.5 mm
Bandraster G 2000
ProductDimensions
NumberLengthThick. kg/pc.
mm/ft mm/”lbs/pc.
Per carton
pcs. m/ft kg/lbs
Lacquered steel with hemmed edges
G2100E001P
G2100D001P
G2100P001P
G2100 · 001P
3600
3750
6000
12’
0.7 3.958
0.7 4.123
0.7
0.7 4.022
Components
ProductDimensions
Number
also available in colour 901 (RAL 9010)
8
8
8
8
28.80
30.00
48.00
96’
33.22
34.54
55.37
33.73
Cross connector
G 2103
Nonius hanger
3129
30
30
30
30
3.28
3.28
3.28
Per carton
WidthLengthpcs. kg m3
- 3126Splice
98.5 mm 200 mm
G2103X500HCross connector
98.5 mm 67.5 mm
- 3129
Wall connector 98.5 mm 67.5 mm
- 3301Nonius hanger (lower part) hoogte = 130 mm
- 3326Nonius hanger base support98.5 mm 67 mm
3126
Per pallet
cartons m3
3326
25
25
25
25
25
6.30
3.48
3.53
1.45
2.48
0.021
0.011
0.011
0.002
0.007
3301
Splice
Wall connector
i n t e r n a t i o n a l
s p e c i a l i s t s
i n
m e t a l
c e i l i n g
s y s t e m s
Parallel bandraster ceilings
System LG
For details of the various
Accessible/Swing ceiling
systems available, see
sections 4.1.3 to 4.1.7.
Nonius hanger
Ceiling soffit clamp
Nonius hanger
Bandraster type BLG
without joint coupling tags
Nonius hanger
Primary angle runner
Connector bracket
Connector bracket for threaded rod hanger M6 or nonius hanger (lower part)
Nonius hanger
Threaded rod
hanger M6
Hanger bracket with angle runner
Connector bracket
Bandraster BBR with joint coupling tags
3.2.2 Parallel bandraster
ce ilings System LG
Bandrasters are manufactured in
standard widths of 100, 125 or 150 mm.
Other widths are available on request.
Threaded
rod hanger
s p e c i a l i s t s
i n
m e t a l
c e i l i n g
Bandraster BBR
with joint coupling tags
Nonius hanger (lower part)
Bandraster BLG
without joint coupling tags
Connector bracket for BBR bandraster
s y s t e m s
Bandraster ceiling
Using either the clip-in or hook-on
construction, when extra suspension is
added at mid-span, this can extend the
bandraster centres to accommodate
light fixtures with finishing panels at
each end.
Bandraster ceiling
With light fixtures spanning between
bandrasters.
02.09 • We reserve the right to change specifications without prior notice.
i n t e r n a t i o n a l
i n t e r n a t i o n a l
s p e c i a l i s t s
i n
m e t a l
c e i l i n g
s y s t e m s
Component details for
Parallel bandraster System LG
Bandraster suspension System LG supported by nonius hangers.
Illustrating closed, or open joint lines 3 or 5 mm wide.
Bandraster profile
Parallel bandraster system height 30
mm, available in standard module
widths of 100, 125 or 150 mm and in
standard lengths of 4,000, 5,000 and
6,000 mm.
Other widths and lengths available on
request.
Rigid construction suitable for installation of partitions when using nonius
hangers, or hanger brackets combined
with angle runners.
For details of the various Accessible/
Swing ceiling systems
available, see sections 4.1.3 to 4.1.7.
Bandraster - Splice
Primary angle runner
Material: galvanized steel
Material: 2.0 mm
galvanized steel
L= 4000 mm
Wall connection bracket
for primary angle runner
Splice for primary angle runner
Hanger bracket for bandraster
Material: galvanized steel
Material: galvanized steel
Material: galvanized steel
Nonius hanger
(lower part)
for bandraster
Wall anchor
for bandraster
Stepped wall anchor
for bandraster
Material: galvanized steel
Material: galvanized steel
Material: galvanized steel
15
12,5
30
Material:
1.25 mm (1.0 mm)
galvanized steel
30
100
125
150
30
3 .2 .2 P a rallel bandraster
ceil ings System LG
100
30
Bandraster suspension System LG supported by primary angle runners.
Illustrating closed, or open joint lines 3 or 5 mm wide.
s p e c i a l i s t s
i n
m e t a l
c e i l i n g
s y s t e m s
02.09 • We reserve the right to change specifications without prior notice.
i n t e r n a t i o n a l
i n t e r n a t i o n a l
s p e c i a l i s t s
i n
m e t a l
c e i l i n g
s y s t e m s
Cross bandraster ceilings
System QB with cross bandraster using
connector bracket
System QB with cross bandraster using
T-connection bracket
3.2.3 Cross b andraster ceilings
S ystem QB
The cross bandraster ceiling is installed
with profiles in two directions; with or
without junction boxes. The modulation can be formed with square tiles or
rectangular panels (planks).
See sections 3.2.3 to 3.2.6 for information on the various cross bandraster
methods of construction.
i n t e r n a t i o n a l
s p e c i a l i s t s
i n
m e t a l
c e i l i n g
s y s t e m s
Cross bandraster ceiling with 1 panel per module.
02.09 • We reserve the right to change specifications without prior notice.
Cross bandraster ceiling with 9 panels per module.
i n t e r n a t i o n a l
s p e c i a l i s t s
i n
m e t a l
c e i l i n g
s y s t e m s
Cross bandraster ceilings
System QB type BBR
For details of the various Accessible/ Swing ceiling
systems available, see sections 4.1.3 to 4.1.7.
Ceiling soffit bracket
Nonius hanger
Threaded rod
hanger M6
Nonius hanger
Connector bracket
for QB
Bandraster profile
Primary bandraster
manufactured in standard
widths of 100, 125 or 150 mm.
Other widths are available on request.
Bandraster BBR with joint coupling tags, showing
the connector bracket secured to nonius hanger
(lower part)
Primary bandraster
Combined lower support
and nonius hanger
Connector bracket
Primary bandraster
Connector bracket
Cross bandraster
3 .2.3 Cross b andraster ceilings
Sys tem QB type BBR
Nonius hanger
Cross bandraster
i n t e r n a t i o n a l
s p e c i a l i s t s
i n
m e t a l
c e i l i n g
s y s t e m s
Cross bandraster ceilings without junction boxes,
with primary and cross bandrasters
Primary bandraster type BBR with joint coupling
tags and location holes on one or both sides for
accurate positioning of the cross bandrasters.
Maximum length 3,600 mm.
Cross bandraster with top support flanges and
location holes at the profile ends for accurately
connecting to the primary bandrasters.
Combination of rectangular panels and light fixture infills.
02.09 • We reserve the right to change specifications without prior notice.
Mega panels, with and without integrated light fixtures.
i n t e r n a t i o n a l
s p e c i a l i s t s
i n
m e t a l
c e i l i n g
s y s t e m s
Combined lower support and nonius hanger
Splice
Wall anchor
T-connection bracket
3.2 .4 Cros s bandraster ceilings
Sy ste m QB type Blg
Cross bandraster ceiling
System QB type BLG
i n t e r n a t i o n a l
s p e c i a l i s t s
Component details for
System QB type BLG
The bandraster system QB is manufactured in
standard widths of 100, 125 or 150 mm and standard lengths of 4,000, 5,000 or 6,000 mm.
Other widths and lengths are available on request.
The cross bandrasters are manufactured to length
and can be supplied with pre-installed
T-connection brackets.
Rigid construction suitable for installation of partitions
when using nonius hangers, or hanger brackets
combined with primary angle runners.
For details of the various Accessible/Swing ceiling
systems available, see sections 4.1.3 to 4.1.7.
Bandraster suspension
System QB supported
by nonius hangers.
Illustrating closed, or
open joint lines 3 or 5
mm wide.
Cross bandraster with
panels, with or without
joint on the long side.
i n
m e t a l
Primary bandraster profile
Material: 1.25 mm
galvanized steel
c e i l i n g
s y s t e m s
Cross bandraster profile
Material: 1.25 mm
galvanized steel
15
15
30
30
100
100
Splice for bandraster
Material: galvanized steel
T-connection bracket
Material: galvanized steel
Stepped wall anchor
for bandraster
Material: galvanized steel
Wall anchor for bandraster
Material: galvanized steel
Combined lower support and
nonius hanger (lower part)
Material: galvanized steel
02.09 • We reserve the right to change specifications without prior notice.
Connection with or without 3 or 5 mm joint
between the panels on the long sides.
i n t e r n a t i o n a l
s p e c i a l i s t s
i n
m e t a l
c e i l i n g
s y s t e m s
Clip-in bandraster system (accessible/Swing)
Parallel or cross bandraster ceilings
Ceiling suspension system:
Primary support ‘C’ profile
Nonius hanger
Clip-in bandraster
Panels
Sw
ing
ide
Gl
Swing open and glide
Swing open and glide
3.2.6 Cl ip-in bandraster ceilings
Clip-in profile
i n t e r n a t i o n a l
s p e c i a l i s t s
i n
m e t a l
c e i l i n g
s y s t e m s
For components refer to Clip-in ceilings type CC in section 3.1.2.
Primary bandraster
maximum length 2940 mm
Cross coupling
∅ 3,5 mm
Cross bandraster
Length coupling
∅ 3,5 mm
Parallel bandraster ceiling
Cross bandraster ceiling
DAMPA, DK-5690 Tommerup, Tel.: +45 63 76 13 10, Fax: +45 63 76 13 99, dampa@dampa.dk, www.dampa.com
02.09 • We reserve the right to change specifications without prior notice.
Dimensions are restricted to a maximum panel area of 1.0 m2 to avoid exceeding the maximum load bearing requirements
for the support grid. The CC clip-in profile can support a maximum lay-in panel weight of 7,0 kg/panel, this will provide
a safety factor of 3. The load bearing is transmitted to the outer side of the panel. Executed in steel or aluminium and
pressure resistant. This system can be applied as an accessible/Swing ceiling system.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising