Tripp Lite SU750XL Datasheet
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: SU750XL
SmartOnline Expandable Tower UPS System - On-line, double-conversion protection for mission-critical
applications
Highlights
750VA/600W on-line expandable runtime tower UPS system
HID-compliant USB port, serial port and SNMP/WEB card slot
Maintains 120V +/-2% output during overvoltages to 138V and brownouts as
low as 65V
NEMA 5-15P (120V 15A) input plug, 6 x NEMA 5-15R outlets, two individually
controllable single-outlet load banks
Fault-tolerant auto-bypass
$250,000 Ultimate Lifetime Insurance (USA & Canada only)
Description
The SU750XL on-line, double-conversion UPS protects critical server, networking or telecommunications equipment from blackouts, brownouts,
voltage fluctuations and surges. Large-capacity 750VA/600W UPS continuously converts incoming AC to DC, then back to perfect sine wave AC
output at 120V AC (+/-2%). Removes harmonic distortion, fast electrical impulses, frequency fluctuations and other hard-to-solve power problems not
addressed by other UPS systems. True sine wave output and zero transfer time offer guaranteed compatibility with all equipment types. Includes 6
UPS supported outlets; 2 single-outlet load banks can be independently controlled via a software interface to selectively reboot remote equipment or
shed less critical loads to extend battery runtime for the most critical equipment. Extended runtime available with optional BP24V15RT2U,
BP24V28-2U, or BP24V70-3U external battery packs. Includes slot for internal SNMP/WEB card, plus DB9 enhanced serial monitoring port for
unattended shutdown, remote control and monitoring of UPS system and power data. Includes USB and DB9 serial ports. Built-in DB9 port offers
both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability. HID-compliant USB interface enables integration with
built-in power management and auto shutdown features of Windows and Mac OS X. Includes Tripp Lite's PowerAlert UPS power management
software. Compatible with Tripp Lite's Watchdog service monitoring/rebooting software. Upright tower form factor; attractive all-black color scheme.
Package Includes
SU750XL UPS System
PowerAlert Software CD and cabling
EPO (Emergency Power Off) cabling
Owner's manual with warranty information
Features
True on-line, double-conversion UPS provides constant, pure sine wave AC output
Maintains continuous operation with zero transfer time through blackouts, brownouts, voltage fluctuations and surges
Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems
Accepts input voltages between 80-138V (65-138V at loads under 70%), regulating output to 120V AC +/-2%
750VA/600W output capacity with 6 x NEMA5-15R outlets
Two built-in individually switchable load banks can be controlled via software interface to selectively reboot remote equipment or shed less
critical loads to extend battery runtime for the most critical equipment (1 outlet per bank)
Standard internal battery set provides 11 min. runtime at half load and 4 min. at full load
Extended runtime available with optional BP24V15RT2U, BP24V28-2U, or BP24V70-3U external battery packs
Extended runtime available with optional BP24V15RT2U, BP24V28-2U, or BP24V70-3U external battery packs
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
DB9 serial network interface supports RS-232 and contact closure messaging
Slot for optional SNMP/WEB card (part# SNMPWEBCARD)
Included PowerAlert UPS power management software and cabling provides monitoring of in-depth site power conditions, full UPS status
and fault warnings, output load level and load bank power control
Compatible with Tripp Lite's WatchDog service monitoring/rebooting software (part# WATCHDOGSW)
Fault-tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS is overloaded or
suffers an internal failure that requires service
Diagnostic LEDs
Upright tower format; attractive all-black color scheme
$250,000 Ultimate Lifetime connected equipment insurance (USA & Canada only)
2-year warranty
Specifications
OUTPUT
Output Volt Amp
Capacity (VA)
750
Output Watt Capacity
(watts)
600
Output power factor
0.8
Crest Factor
3:1
Nominal Output
Voltage(s) Supported
100v; 110v; 120v
Nominal Voltage details
120V default
Frequency compatibility
50 / 60 Hz
Frequency
compatibility details
Output frequency matches input nominal on startup, defaults to 60 Hz on cold-start
Output voltage
regulation (line mode)
+/- 2%
Output voltage
regulation (Battery
mode)
+/- 2%
Built-in UPS output
receptacles
6 5-15R outlet(s)
Built-in controllable
switched load banks
Two switchable single-outlet 5-15R load banks
Basic PDU options
PDU1215 (1U / 13 5-15R outlets); PDUNV (1U / 2 C19, 12 C13 outlets); PDU1415 (0U / 14 5-15R outlets);
PDUV15 (0U / 12 5-15R outlets)
Metered PDU options
PDUMH15 (1U / 13 5-15R outlets); PDUMH15AT (1U / 8 5-15R outlets)*; PDUMV15 (0U / 16 5-15R outlets)
Switched PDU options
PDUMH15ATNET (1U / 8 5-15R outlets)*; PDUMV15NET (0U / 16 5-15R outlets)
External PDU
redundancy options
*ATS switch options PDUMH15AT & PDUMH15ATNET support dual UPS and hot-swappable UPS configurations
Output AC waveform
(AC mode)
Sine wave
Output AC waveform
(battery mode)
Sine wave
INPUT
Rated input current (at
maximum load)
6.2A
Nominal Input
Voltage(s) Supported
100V AC; 110V AC; 120V AC
UPS input connection
type
5-15P
Input circuit breaker
15A
UPS Input cord length
(ft.)
10
UPS Input cord length
(m)
3
Recommended
Electrical Service
15A 120V
BATTERY
Full load runtime
(minutes)
4 min. (600w)
Half load runtime
(minutes)
11 min. (300w)
External battery pack
compatibility
BP24V15RT2U (limit 1); BP24V28-2U (limit 1); BP24V70-3U (multi-pack compatible)
DC system voltage
24V DC
Battery recharge rate
(included batteries)
Less than 6 hours from 10% to 90%
Replacement battery
cartridge (internal UPS
battery replacement)
RBC24-SUTWR
Battery Access
Battery access door
Battery replacement
description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation
description
Online, double-conversion power conditioning
Overvoltage correction
2% output voltage regulation during overvoltages to 138
Undervoltage correction
2% output voltage regulation during undervoltages to 80
Severe undervoltage
correction
2% output voltage regulation during undervoltages to 65 (under 70% load only)
LEDS ALARMS & SWITCHES
LED Indicators
14 LEDs indicate line power, online mode, bypass mode, on-battery, overload, battery low, replace battery and
fault status information - includes 4-LED meter display for load and battery charge level
Alarms
Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown
conditions
Alarm cancel operation
Power-fail alarm can be silenced using alarm-cancel switch
Switches
2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
570
UPS AC suppression
response time
Instantaneous
UPS Dataline
suppression
1 line TEL / DSL or 10Base T Ethernet protection
EMI / RFI AC noise
suppression
Yes
PHYSICAL
Installation form
factors supported with
included accessories
Tower
Primary form factor
Tower
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / inches)
10 x 6.8 x 13.2
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / cm)
25.4 x 17.1 x 33.7
UPS / Power Module
weight (lbs)
28.7
UPS / Power Module
weight (kg)
13
UPS Shipping
dimensions (height x
width x depth / inches)
14.2 x 10 x 18.5
UPS Shipping
dimensions (height x
width x depth / cm)
36.2 x 25.4 x 47
Shipping weight (lbs)
34.2
Shipping weight (kg)
15.5
UPS housing material
Steel
Cooling method
Fan
ENVIRONMENTAL
Operating Temperature
Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature
Range
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity
0 to 95%, non-condensing
AC mode BTU / hr. (full
load)
304.8
Battery mode BTU / hr.
(full load)
304.8
Audible Noise
< 45 dB at front side 1m
COMMUNICATIONS
Communications
interface
USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface
Network monitoring
port description
Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 and contact closure
communications
PowerAlert software
Included
Communications cable
USB and DB9 cabling included
WatchDog compatibility
Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer time
No transfer time (0 ms.) in online, double-conversion mode
Low voltage transfer to
battery power (setpoint)
80V (100% load), 65V (
High voltage transfer to
battery power (setpoint)
138
SPECIAL FEATURES
Cold Start (startup in
battery mode during a
power failure)
Cold-start operation supported
High availability UPS
features
Automatic inverter bypass; Hot swappable batteries
Green & high efficiency
features
Individually controllable load banks
CERTIFICATIONS
UPS Certifications
Tested to UL1778 (USA); Tested to CSA (Canada); Meets FCC Part 15 Category B (EMI); Meets FCC Part 68 /
Industrie Canada (telecommunications); ROHS (Reduction of Hazardous Substances)
WARRANTY
Standard warranty
period
2 years
Connected equipment
insurance (USA,
Canada, Puerto Rico)
$250,000 connected equipment insurance
Related Items
Optional Products
Product Type
Related Model
Description
Qty.
Shutdown Cable Kits
AS400CABLE KIT
Power Management Tools - UPS Communication Cable Kit for System
i / AS400 / iSeries Servers
-
External Battery Packs
BP24V15RT2U
BP24V15RT2U - External Battery Pack for UPS System
-
External Battery Packs
BP24V28-2U
BP24V28-2U - External Battery Pack for UPS System
-
External Battery Packs
BP24V70-3U
BP24V70-3U - External Battery Pack for UPS System
-
Surge Protectors
DCATV
Network Surge Suppressor - Essential protection for TV/VCR coaxial
lines
-
Surge Protectors
DNET1
Network Surge Suppressor - Essential protection for data and
communication lines
-
Surge Protectors
DTEL2
Network Surge Suppressor - Essential protection for data and
communication lines
-
SNMP Accessories
ENVIROSENSE
Monitors temperature, humidity and contact-closure inputs. (Requires
SNMPWEBCARD or switched PDU.)
-
Power Distribution
PDU1215
Basic PDU / Power Distribution Unit - Safe, reliable power distribution
for critical networking equipment
-
Power Distribution
PS7224
Tripp Lite Power Strip - Multiple outlets wherever you need them
-
SNMP Accessories
SNMPWEBCARD
For remote monitoring and control via SNMP, Web, or Telnet.
-
Extended Warranties
WEXT3-500-1500
3-Year Extended Warranty - For Smart Line-Interactive and Online
Tower or Rack models, 1500VA or less
-
Extended Warranties
WEXT5-500-1500
5-Year Extended Warranty - For Smart Line-Interactive and Online
Tower or Rack models, 1500VA or less
-
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=3299.
© 2010 Tripp Lite. All Rights Reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising