CHT825 - Craig Electronics
Size:148x210MM
2
POWER SOURCE
This unit can be powered by either AC power or built-in rechargeable battery.
AC Operation:
To operate the unit using AC power:
1. Connect the small plug from the supplied AC power cord to the AC Jack on the rear of unit.
2. Plug the AC power cord to the AC wall outlet having AC 120V~, 60Hz.
3. Press the Power Switch on the rear of unit to POWER ON position to power on the unit.
4. When finished, press the Power Switch to POWER OFF position to shut off the unit.
L
AUX 2
R
To Wall Outlet
ON
POWER
AC 120V ~ 60Hz
OFF
CHARGE
TO AC IN JACK
Operation by Built-in Rechargeable Battery:
The unit has a built-in DC 12V, 2600mAH (31.2 WH) Sealed Lead Acid rechargeable battery, recharge it
before use as below:
1. Connect the small plug from the supplied AC power cord to the AC Jack on the rear of unit.
2. Plug the AC power cord to the AC wall outlet having AC 120V~, 60 Hz.
3. Press the Power Switch on the rear of unit to CHARGE position to start charging, the green CHARGE
Indicator on the front of unit will illuminate. When the battery is fully charged, the CHARGE Indicator
will turn off.
4. After charge, disconnect the AC power cord from wall outlet. Press the Power Switch on the rear of unit
to POWER ON position to power on the unit. (If the AC power cord is connecting to wall outlet, the unit
will select to using AC power automatically).
5. When finished, press the Power Switch to POWER OFF position to shut off the unit.
Notes:
A. In Power on mode, the battery will not be recharge. Always press the Power Switch to CHARGE position
to recharge the battery.
B. For charging first time, charge it approximate 10 hours.
C. Recharge and store the device within the temperature range to 5°C~35°C (40°F~95°F).
D. Do not overcharges (longer than 24 hours). Excessive charging or running the unit until battery goes
empty will damage battery. Battery life will be extended if you keep the battery fully charge.
E. Battery life naturally shortens slowly over time.
F. The rechargeable battery incorporated in this product is not user replaceable.
G. If long period of time will not use, unplug the AC power cord from wall outlet.
19
4
3
2
1
4 BAND EQUALIZER
AUX 1
INPUT
GUITAR
INPUT
POWERED PORTABLE
SOUND SYSTEM
MIC
INPUT
INDICATOR
POWER CHARGE
GUITAR VOL
VOL
MIC
MODE
LED ON/OFF
ECHO
MASTER VOLUME
5
6
7
11
8 9
12 13 14
10
15
1. GUITAR INPUT Jack
2. MIC (Microphone ) INPUT Jack
3. AUX 1 INPUT Jack
4. 4 BAND EQUALIZER
5. GUITAR VOL (Volume) Knob
6. MIC VOL (Microphone Volume) Knob
7. MIC ECHO (Microphone Echo) Knob
8. POWER Indicator
9. CHARGE Indicator
10. MASTER VOLUME Knob
11. INDICATOR (S)
12.
Button
13.
Button
14.
Button
15. MODE / LED ON - OFF Button
16
16. AUX 2 Jacks
17. Power Switch (POWER ON/POWER OFF/CHARGE)
18. AC IN Jack (AC 120V~; 60Hz)
17
19. Carry Handle
18
4
L
AUX 2
R
ON
POWER
AC 120V ~ 60Hz
OFF
CHARGE
OPERATIONS:
General Operation:
1. Connect the supplied AC power cord to the unit and AC wall outlet (or fully recharge the built-in battery)
as previous procedures.
2. Press the Power Switch on the rear of unit to POWER ON position to power on the unit. The POWER
Indicator on the front of unit will illuminate.
3. Press the MODE -- LED ON/OFF Button on the front of unit repeatedly to select the input source as:
● Blue Indicator illuminate (or blinking): BT (Blue Tooth) mode
● Green Indicator illuminate: Radio FM mode
● Red Indicator illuminate: AUX 1 mode
● Indigo Indicator illuminate: AUX 2 mode
4. Turn the MASTER VOLUME to adjust the volume level as desire.
5. Slide the band switches of the 4 BAND EQUALIZER to enhance or reduce the level of the specific
audio frequency as desire.
6. Press and hold the MODE—LED ON/OFF Button to turn off the decorative lights. Press and hold
the button again to turn it back.
7. When finished listening, press the Power Switch on the rear of unit to POWER OFF position to
shut of the unit.
NOTE: If long period of time will not use the unit. Unplug the AC power cord from wall outlet.
BT (Blue Tooth):
In first time use or re-pairing to a new BT Device, pairing it as below:
1. Power on the unit as previous procedures.
2. Press the MODE--LED ON/OFF Button on the unit repeatedly until the color of the Indicator is
changed to Blue and blinking.
3. Power on the external BT Device and enter to searching mode. Start pairing as the on screen
instructions on the external BT Device. After paired, the Blue Indicator will stop blinking. (For details
pairing procedures, please refer to the user’s manual of your BT Device.).
Notes:
● When the external BT player searched the unit, our model number “CHT825” will appear on the
display of external BT Device.
● Pairing code “0000” or “1234” may need to enter.
Normal operation after paired:
1. Turn on the BT function of the external BT Device.
2. Power on the unit, press the MODE--LED ON/OFF Button on the front of unit repeatedly until the
color of the Indicator changed to Blue and blinking.
3. Wait a few seconds until the unit paired to the external BT Device automatically. (The Blue Indicator
will stop blinking).
4. Plays the music in the connected BT Device as usual.
5. During playback:
● Press
Button to pause; press and release again to resume normal playback.
● Press the
or
Button to skip tracks.
FM (Radio):
1. Power on the unit as previous procedures.
2. Press the MODE--LED ON/OFF Button on the unit repeatedly until the color of the Indicator is
changed to Green.
3. In first time use (or replaced the unit in a new location), press and hold the
Button to search and
stored the available FM station.
4. Press the
or
Button repeatedly to select and plays the desired stored FM station.
5
FM Antenna:
The unit had a built-in FM antenna. If reception is weak; turn or relocation the unit to improve the
radio reception.
AUX 1:
1. Insert one of the plug from the supplied Audio connection cable (with 3.5mm stereo mini plugs) to the
Phones Jack; Line Out Jack or AUX Out Jack on external audio device such like the iPhones; iPad;
iPod; MP3 Player; Discman … etc.
2. Insert the other plug to the AUX 1 INPUT Jack on the front of unit as the figure below:
AUX 1
4 BAND EQUALIZER
AUX 1
INPUT
ipad, discman
GUITAR
INPUT
POWERED PORTABLE
SOUND SYSTEM
MIC
INPUT
INDICATOR
POWER CHARGE
GUITAR VOL
VOL
MIC
MODE
LED ON/OFF
ECHO
MASTER VOLUME
3. Power on the unit as previously procedures.
4. Press the MODE--LED ON/OFF Button repeatedly until the color of the Indicator is changed to Red.
5. Plays the music in the connected external Audio device as usual. (Make sure the volume level of
the external device in high level. Otherwise, sound from this unit is weak).
AUX 2:
1. Insert one end of the RCA connection cable (not supplied) to the Audio Out Jacks (RCA Type) on
external Video/Audio device such like TV; DVD Player; VCR … etc.
2. Insert the other end to the AUX 2 Jack on the rear of unit as the figure below:
L
AUX 2
R
ON
POWER
AC 120V ~ 60Hz
OFF
CHARGE
supplied
3. Power on the unit as previously procedures.
4. Press the MODE--LED ON/OFF Button repeatedly until the color of the Indicator changed to Indigo.
5. Plays the music on the connected external Audio device as usual. (Make sure the volume level of the
external device in high level. Otherwise, sound from this unit is weak).
6
Microphone:
1.Connect the supplied Microphone to the MIC (Microphone) INPUT Jack on the front of unit as the figure
below:
4 BAND EQUALIZER
AUX 1
INPUT
GUITAR
INPUT
POWERED PORTABLE
SOUND SYSTEM
MIC
INPUT
INDICATOR
POWER CHARGE
GUITAR VOL
VOL
MIC
MODE
LED ON/OFF
ECHO
MASTER VOLUME
Dynamic Microphone Included
2. Power on the unit and plays the music as usual.
3. Slide the ON/OFF Switch on the Microphone to ON position to turn on the Microphone.
4. Turn the MIC VOL (Microphone Volume) Knob on the front of unit to adjust the sound level from
connected microphone.
NOTE: If feedback noise (high audio frequency noise) is hearing from the speakers, turn the
MIC VOL (Microphone Volume) Knob counterclockwise to reduce the microphone volume level
or keep the Microphone away from the speakers.
5. Turn the MIC ECHO (Microphone ECHO) Knob on the front of unit to adjust the effect of echo as desire.
6. When finished, slide the ON/OFF Switch on the Microphone to OFF position to shut off the
Microphone. And/or unplug the Microphone from the unit.
Guitar (Electric):
1.Connect the connection plug from the Electric Guitar (not supplied) to the GUITAR INPUT Jack
on the front of unit as the figure below:
4 BAND EQUALIZER
AUX 1
INPUT
GUITAR
INPUT
POWERED PORTABLE
SOUND SYSTEM
MIC
INPUT
INDICATOR
POWER CHARGE
GUITAR VOL
VOL
MIC
MODE
LED ON/OFF
ECHO
MASTER VOLUME
Electric Guitar (not supplied)
2. Power on the unit as usual.
3. Turn the GUITAR VOL (Guitar Volume) Knob on the front of unit to adjust the sound level from
connected guitar.
NOTE: If feedback noise (high audio frequency noise) is hearing from the speakers, turn the
GUITAR VOL (Guitar Volume) Knob counterclockwise to reduce the volume level or
keep the guitar away from the speakers.
4. When finished, unplug the guitar from the unit.
7
Carry Handle:
Press the button on the handle to release the lock to pull it out or
back as the figure below:
TROUBLESHOOTING GUIDE
Check the follows before requesting service:
SYMPTOM
No power
No Sound
POSSIBLE CAUSE
POSSIBLE SOULTION
AC Power Cord had not
plug in the unit or wall outlet
Plug it to the wall outlet and the
unit
Power Switch is in OFF
position
Press the Power Switch on
the rear of unit to POWER ON
position
Built-in rechargable battery
consume
Recharge the built-in battery
as page 3
Volume in minimum position
Rise volume level by turning
the MASTER VOLUME
clockwise
The connected device is not
in playback mode
Plays the audio/video files in the
connected/paired device as usual
Sound output of the
connected /paired device weak
Rise the volume level of the
connected /paired device
Input source incorrect
Press the MODE-LED ON/OFF
Button repeatedly to set or reset the
input source as the connection
Volume level too high
Reduce the volume level by turning
the MASTER VOLUME Knob
counterclockwise
Sound distortion
Volume level of the connected Reduce the volume and/or bass level
/paired device too high
of the connected /paired device
BT not function
The external BT device too
far from the unit
Place the external BT device close
to the unit
Built-in battery cannot
be recharge.
The Power Switch has not
press to CHARGE position.
Press the Power Switch to
CHARGE position.
8
Cleaning:
1. To prevent fire or shock hazard, disconnect your unit from the AC wall outlet when cleaning.
2. The finish on your unit may be cleaned with a dust cloth and cared for as other furniture.
Use caution when cleaning and wiping the plastic parts.
3. Mild soap and a damp cloth may be used.
General Specifications:
Power Source:....……...AC 120V~, 60Hz; 0 .5A or built-in rechargeable DC 12V, 2600mAH
(31.2 WH) Sealed Lead Acid battery (Recharge by AC 120V~, 60 Hz)
Power Consumption: ……………………………..........................................................Max 21W
Radio FM Band Coverage: ………………….....................................…….............87.5-108MHz
BT Effective Range: …………………………....................................Up to 32 Feet in open area
BT Version: ………………….......................................................................................2.1+ EDR
Audio Power: …………………………………………….....................................…..…….......20W
Impedance of Speakers: …………………...................................................... 3 Ohms, 15W x 2
Accessories:
1 x User’s Manual
1 x Audio Connection Cable with 3.5mm Stereo Mini Plugs
1 x AC Power Cord
1 x Microphone
SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE
9
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising