Cisco TelePresence System Codec C60 and C40 Administrator Guide

Cisco TelePresence System Codec C60 and C40 Administrator Guide
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Software version TC5.1
FEBRUARY 2012
Codec C60/C40
Profile 42”
Profile 52”/55”
Profile 52” Dual / 55” Dual
Profile 65”
Administrator guide
For Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
1
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Contents
Introduction
TA -you
ToCfor
- Hidden
Thank
choosing Cisco!
text anchor
Your Cisco product has been designed to give you many years
of safe, reliable operation.
This part of the product documentation is aimed at
administrators working with the setup of the Codec C60/C40
and Profiles using Codec C60/C40.
Our main objective with this Administrator guide is to address
your goals and needs. Please let us know how well we
succeeded!
May we recommend that you visit the Cisco web site regularly
for updated versions of this guide.
The user documentation can be found on http://www.cisco.
com/go/telepresence/docs.
How to use this guide
The top menu bar and the entries in the Table of contents are
all hyperlinks. You can click on them to go to the topic.
Web interface
Advanced settings
Administrator guide
Password protection
Appendices
Contact us
Table of Contents
Introduction............................................................................ 4
User documentation............................................................... 5
Software................................................................................ 5
Cisco contacts....................................................................... 5
What’s new­in this version........................................................ 6
Software release notes.......................................................... 6
Software download................................................................ 6
New features and improvements........................................... 6
Advanced configuration changes........................................... 7
Advanced settings................................................................ 35
Overview of the advanced settings........................................ 36
The Audio settings.................................................................. 40
The Cameras settings............................................................ 44
The Conference settings........................................................ 46
The FacilityService settings.................................................... 49
The GPIO settings.................................................................. 50
The H323 settings.................................................................. 51
Profile 42” using Codec C40 at a glance................................. 8
The Network settings............................................................. 53
Profile 52”/55” at a glance....................................................... 9
The NetworkPort settings....................................................... 57
Profile 52” Dual / 55” Dual at a glance................................... 10
The NetworkServices settings................................................ 57
Profile 65” at a glance............................................................ 11
The Phonebook settings......................................................... 60
Codec C60 at a glance.......................................................... 12
The Provisioning settings........................................................ 60
Codec C40 at a glance.......................................................... 13
The RTP settings.................................................................... 62
Web interface....................................................................... 14
Starting the web interface...................................................... 15
Changing the system/codec password.................................. 16
The interactive menu.............................................................. 17
The system information page................................................. 18
Log files.................................................................................. 19
XML files................................................................................. 20
Advanced configuration.......................................................... 21
Selecting a wallpaper............................................................. 22
The Security settings.............................................................. 62
The SerialPort settings........................................................... 63
The SIP settings..................................................................... 64
The Standby settings.............................................................. 65
The SystemUnit settings......................................................... 66
The Time settings................................................................... 67
The UserInterface settings..................................................... 68
The Video settings.................................................................. 69
The Experimental settings...................................................... 76
Sign in banner........................................................................ 23
Password protection............................................................. 80
Placing a call.......................................................................... 24
Password protection............................................................... 81
Changing the system/codec password................................ 81
Setting the Administrator settings menu password.............. 82
Setting a root password....................................................... 82
Controlling and monitoring a call............................................ 25
Local layout control................................................................. 26
Capturing snapshots............................................................... 27
Upgrading the system software.............................................. 28
Certificate management......................................................... 29
The audit certificate list........................................................... 30
User administration................................................................. 31
Restarting the system............................................................. 33
Factory reset.......................................................................... 34
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
2
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Appendices.......................................................................... 83
Connecting the Cisco TelePresence Touch 8” controller....... 84
About monitors when you have a Codec C60........................ 85
The main monitor................................................................. 85
Connecting to HDMI 1....................................................... 85
Connecting to DVI-I 2........................................................ 85
Moving the OSD using the remote control......................... 85
Moving the OSD using the web interface.......................... 85
Moving the OSD using API commands.............................. 85
Dual monitors....................................................................... 85
Dual monitor configuration................................................. 85
About monitors when you have a Codec C40........................ 86
The main monitor................................................................. 86
Connecting to HDMI 1....................................................... 86
Connecting to DVI-I 2........................................................ 86
Moving the OSD using the remote control......................... 86
Moving the OSD using the web interface.......................... 86
Moving the OSD using API commands.............................. 86
Dual monitors....................................................................... 86
Dual monitor configuration................................................. 86
TC console............................................................................. 87
Video compositor................................................................. 87
Audio console...................................................................... 87
Optimal definition profiles....................................................... 88
ClearPath — Packet loss resilience.......................................... 89
Requirements for speaker systems connected to a Cisco
TelePresence C Series codec................................................ 90
DNAM for Profile 42”/52”/55”................................................ 91
The DNAM Loudspeaker...................................................... 91
The DNAM Amplifier............................................................ 91
DNAM for Profile 65”.............................................................. 92
The DNAM Loudspeaker...................................................... 92
The DNAM Amplifier............................................................ 92
Technical specifications.......................................................... 93
Codec C60/C40.................................................................. 93
Profile 52”/55” using C60.................................................... 95
Profile 65” using C60........................................................... 96
Profile 42”/52”/55” using C40............................................. 97
Supported RFCs..................................................................... 98
User documentation on the Cisco web site............................ 99
Cisco contacts.................................................................... 100
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
3
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Chapter 1
Introduction
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
4
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Introduction
This document provides you with the information
required to administrate your product at an advanced
level.
Products covered in this guide:
• Profile 52” / 55” / 65” using C60
• Profile 52” Dual / 55” Dual using C60
• Profile 42” / 52” / 55” using C40
• Codec C60
• Codec C40
Web interface
Advanced settings
Administrator guide
Password protection
Appendices
Contact us
User documentation
Cisco contacts
The user documentation for the Cisco TelePresence systems,
running the TC software, has several guides suitable for various
user groups.
On our web site you will find an overview of the worldwide
Cisco contacts.
• Video conference room primer
• Video conference room acoustics guidelines
• Installation guides for the TelePresence systems
• Software release notes for the TC software
Go to: http://www.cisco.com/web/siteassets/contacts
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Dr.
San Jose, CA 95134 USA
• Getting started guide for the TelePresence systems
• User guide for the TelePresence systems
-- with Touch controller
-- with Remote Control
• Quick reference guides for the TelePresence systems
• Administrator guides for the TelePresence systems
• Camera user guide for the PrecisionHD cameras
• API reference guides for the Codec C Series
• TC Console user guide for the Codec C Series
• Physical interfaces guides for the Codec C Series
• Regulatory compliance and safety information guides
• Legal & license information for products using TC software
Downloading the user documentation
We recommend you visit the Cisco web site regularly for
updated versions of the user documentation.
Go to: http://www.cisco.com/go/telepresence/docs
Guidelines how to find the documentation on the Cisco web
site are included in the User documentation on the Cisco
web site appendix.
Software
You can download the software for your product from the Cisco
web site.
Go to:http://www.cisco.com/cisco/software/navigator.html
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
5
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
What’s new­in this version
This section provides an overview of the new and changed
advanced settings and new features in the TC5.1 software
version.
Software release notes
For a complete overview of the news and changes, we
recommend reading the Software Release Notes (TC5).
Go to: http://www.cisco.com/en/US/products/ps11422/tsd_
products_support_series_home.html
Software download
For software download go to: http://www.cisco.com/cisco/
software/navigator.html
New features and improvements
Extend meeting notification on screen when using Touch
A notification is shown on screen 5 minutes before a scheduled
meeting is about to end. The same notification is displayed on
the Touch controller and allows the user to extend the meeting
by pressing Yes.
Web snapshots from remote sites
Web snapshots of the remote incoming video are available for
unencrypted calls.
Web interface enhancements
Software versions with valid release keys are listed on the
Software Upgrade page.
The system can be reset to factory default settings from the
Maintenance tab.
Help button available on Touch
If configured, a help button ( ? ) will appear in the top banner.
By pressing the help button, a call button will appear, serving as
speed dial to a facility service, e.g. Help desk, Taxi or Reception.
Current calls will be placed on hold when calling the facility
service.
Controlling additional cameras from Touch
A drop-down menu allows selecting one of the connected
cameras as main video source. The camera controls will operate
the camera that is selected as main video source.
New languages supported on Touch
• Danish
• Norwegian
• Spanish
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
6
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Introduction
Web interface
Advanced settings
Administrator guide
Password protection
Appendices
Contact us
Advanced configuration changes
New settings
Settings that are removed
Settings that are modified
Conference [1..1] Multipoint Mode
Experimental PacketOverloadHandling WhenDetected
Conference DoNotDisturb Mode
OLD: <On/Off>
Experimental Conference [1..1] MultiStream Mode
NEW: <On/Off/Timed>
Experimental Conference [1..1] MultiStream InputCount
Video Output HDMI [1] Resolution
Experimental Conference [1..1] MultiStream OutputCount
OLD: <Auto/640_480_60/800_600_60/1024_768_60/
1280_1024_60/1280_720_50/1280_720_60/
1920_1080_50/1920_1080_60/1280_768_60/
1360_768_60/1366_768_60/1600_1200_60/
1920_1200_60>
Experimental Conference [1..1] MultiStream Stream [1..4]
Source
FacilityServices Service [1..5] Type
FacilityServices Service [1..5] Name
NEW: <Auto/640_480_60/800_600_60/1024_768_60/
1280_1024_60/1280_720_50/1280_720_60/
1920_1080_50/1920_1080_60/1280_768_60/
1360_768_60/1366_768_60/1600_1200_60/
1680_1050_60/1920_1200_60>
FacilityServices Service [1..5] Number
FacilityServices Service [1..5] CallType
Video Output DVI [2] Resolution
OLD: <Auto/640_480_60/800_600_60/1024_768_60/
1280_1024_60/1280_720_50/1280_720_60/
1920_1080_50/1920_1080_60/1280_768_60/
1360_768_60/1366_768_60/1600_1200_60/
1920_1200_60>
NEW: <Auto/640_480_60/800_600_60/1024_768_60/
1280_1024_60/1280_720_50/1280_720_60/
1920_1080_50/1920_1080_60/1280_768_60/
1360_768_60/1366_768_60/1600_1200_60/
1680_1050_60/1920_1200_60>
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
7
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Introduction
Web interface
Advanced settings
Administrator guide
Password protection
Profile 42” using Codec C40
at a glance
Appendices
Contact us
PrecisionHD 1080p camera
See the installation sheet for the Profile 42” for instructions on
how to install the system.
Codec C40
• Full HD video.
Monitor 42’’
Full HD LCD
• High resolution data sharing.
• Full HD Multisite.
• Rich I/O capabilities.
PrecisionHD 1080p camera
Full HD Camera designed for visual communication with:
• 12 × optical zoom.
• Fast and precise pan, tilt and zoom.
Monitor
42” Full HD LCD, 16:9, 1080 × 1920 resolution.
Audio module
In the bottom module:
• Audio amplifier (DNAM)
Ethernet cable
• Codec C40
PC cable
Wide band audio module supporting:
• 20 kHz AAC-LD.
• Full echo canceling.
• Stereo.
Mic cable
Power cable
Audio amplifier
Optimized DNAM for the Profile system, providing
crystal clear and natural audio.
Floor standing footplate
Microphones
2 × Microphones.
(Other options: Wheel base
or wall mount on pedestal)
Remote control
with batteries
2 × Microphones with
cables
Touch controller
Operating devices
• Touch 8” controller (for C Series).
• Remote control with AAA batteries.
Base options
Floor standing footplate, wheel base, or wall mount on pedestal.
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
8
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Profile 52”/55” at a glance
See the installation sheets for the Profile 52”/55” for instructions
on how to install the system.
PrecisionHD 1080p camera
Codec C60/C40
• Full HD video.
• High resolution data sharing.
• Full HD Multisite.
Monitor 52’’/55”
Full HD LCD
• Rich I/O capabilities.
PrecisionHD 1080p camera
Full HD Camera designed for visual communication with:
• 12 × optical zoom.
• Fast and precise pan, tilt and zoom.
Monitor
52”/55” Full HD LCD, 16:9, 1080 × 1920 resolution.
In the bottom module:
Audio module
Wide band audio module supporting:
• 20 kHz AAC-LD.
• Full echo canceling.
• Stereo.
Audio amplifier
• Audio amplifier (DNAM)
Ethernet cable
• Codec C60/C40
PC cable
Mic cable
Power cable
Optimized DNAM for the Profile system, providing
crystal clear and natural audio.
Three/two microphones
Microphones
Three (with C60) / Two (with C40) microphones with cables.
Operating devices
Remote control
Floor standing footplate
(Other options: Wheel base
or wall mount on pedestal)
Touch 8”controller
• Touch 8” controller.
• Remote control with AAA batteries.
(Profiles using
Codec C40)
Base options
(Profiles using
Codec C60)
Floor standing footplate, wheel base, or wall mount on pedestal.
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
9
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Profile 52” Dual / 55” Dual at a glance
PrecisionHD 1080p camera
See the installation sheets for the Profile 52” Dual / 55” Dual for
instructions on how to install the system.
Dual 52’’/ Dual 55” monitor
Full HD LCD
Codec C60
• Full HD video.
• High resolution data sharing.
• Full HD Multisite.
• Rich I/O capabilities.
PrecisionHD 1080p camera
Full HD Camera designed for visual communication with:
• 12 × optical zoom.
• Fast and precise pan, tilt and zoom.
Dual monitor
Dual 52” / Dual 55” Full HD LCD, 16:9, 1080 × 1920 resolution.
Audio module
In the bottom module:
Wide band audio module supporting:
• 20 kHz AAC-LD.
• Audio amplifier (DNAM)
Ethernet cable
• Codec C60
• Full echo canceling.
• Stereo.
PC cable
Audio amplifier
Mic cable
Optimized DNAM for the Profile system, providing
crystal clear and natural audio.
Power cable
Four microphones
Microphones
Four microphones with cables.
Operating devices
• Touch 8” controller.
Remote control
Floor standing footplate
Touch 8”controller
(Other option: Wall mount
on pedestal)
• Remote control with AAA batteries.
Base options
Floor standing footplate or wall mount on pedestal.
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
10
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Introduction
Web interface
Advanced settings
Administrator guide
Password protection
Appendices
Contact us
Profile 65” at a glance
See the Profile 65” Installation Sheet for instructions of how to
assemble the system.
PrecisionHD 1080p camera
Codec C60
• Full HD video.
• High resolution data sharing.
• Full HD Multisite.
• Rich I/O capabilities.
Monitor 65”
Full HD LCD
PrecisionHD 1080p camera
Full HD Camera designed for Visual communication with:
• 12 × optical zoom.
• Fast and precise pan, tilt and zoom.
Monitor 65”
65” Full HD LCD, 16:9, 1080 × 1920 resolution.
Audio module
Wide band audio module supporting:
• 20 kHz AAC-LD.
• Full echo canceling.
• Stereo.
Audio amplifier
Optimized DNAM for the Profile system, providing
crystal clear and natural audio.
In the bottom module:
Ethernet cable
• Audio amplifier (DNAM)
• Codec C60
PC cable
Mic cables
Power cable
Remote control
with batteries
Microphones
Three microphones with cables.
Operating devices
• Touch 8” controller.
Floor standing footplate
(Other option: Wall mount
on pedestal)
Three microphones
Touch 8” controller
• Remote control with AAA batteries.
Base options
Floor standing footplate or wall mount on pedestal.
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
11
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Introduction
Web interface
Advanced settings
Administrator guide
Password protection
Appendices
Contact us
Codec C60 at a glance
The Codec C60 is the 1080p HD video collaboration engine.
Based upon the same technology as the Codec C90, the C60
delivers Full HD video, HD collaboration and superior audio for
natural communication at its finest, delivering unrivaled value.
The C60 is a standards-compliant codec for integration into
team meeting rooms, boardrooms and industry projects.
• Full High Definition Video with up to 4 HD sources, and
collaboration with optimal definition for the best video quality
every time, regardless of environment.
Integrator package
The integrator package of the Codec C60 comes with the
PrecisionHD 1080p camera, microphone and cables.
• Highest Quality Audio with flexibility to add up to 4
microphones directly from the codec, and superior, full
duplex audio with high quality stereo sound.
• Full APIs.
• Ensure successful, streamlined integration projects with
standards-compliant professional connectors.
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
12
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Introduction
Web interface
Advanced settings
Administrator guide
Password protection
Appendices
Contact us
Codec C40 at a glance
The Codec C40 provides all the power required to transform any
conference room to a HD video collaboration room. Designed
for any standard HD integration project, the Codec C40 is the
ideal solution for everyday video conferencing and collaboration
solution. 1080p HD video, and Multisite™ features combine to
make the Codec C40 ideal for a variety of applications.
The Codec C40 is ideal for standard meeting rooms, executive
offices and team collaboration rooms.
• Full High Definition Video with up to 2 HD sources, and
collaboration with optimal definition for the best video quality
every time, regardless of environment.
Integrator package
The integrator package of the Codec C40 comes with the
PrecisionHD 1080p camera, microphone and cables.
• Highest Quality Audio with flexibility to add up to 2
microphones directly from the codec, and superior, full
duplex audio with high quality stereo sound.
• Full APIs.
• Ensure successful, streamlined integration projects with
standards-compliant professional connectors.
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
13
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
interface
Web
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Chapter 2
Web interface
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
14
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Starting the web interface
The web interface provides full configuration access to your
video conference system.
You can connect from a computer and administer the system
remotely.
In the following you will find information how to use the web
interface for system configuration and maintenance.
1. Connect to the video system
Open a web browser and enter the
IP address of the video system in the
address bar.
To find the IP address (IPv4 or IPv6), tap
More > Settings > System Information
on a Touch controller; or navigate to
Home > Settings > System information
when using a remote control and the
on-screen menu.
2. Sign in
Enter the user name and password for
your video system and press Sign In.
The system is delivered with a default
user named admin with no password
(i.e. leave the Password field blank when
signing in for the first time).
NOTE: We strongly recommend that you
set a password for the admin user to
restrict access to system configuration,
see the next page.
Sign out
Click on your user
name and select
Sign out from the
drop down menu.
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
15
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Changing the system/codec
password
You sign in to the web interface with the same user name and
password as for the video conference system.
1. Click your
user name
NOTE: We strongly recommend that you set a password for
the default admin user, and any other users with ADMIN rights,
to restrict access to system configuration.
You can read more about password protection in the
Password protection chapter.
2. Open the Change
Password dialog box
Select Change password
in the drop down menu.
3. Enter passwords
4. Set the new password
Press Change password for
the change to take effect.
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
16
Enter your current and new passwords as
requested. If the password currently is not
set, leave the Current password field blank.
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Administrator guide
Password protection
Advanced settings
Appendices
Contact us
The interactive menu
The web interface provides access to tasks and configurations
which are grouped in four categories. They are available from
the main menu.
The main menu appears near the top of the page when you
have signed in.
Main menu
• Diagnostics
The sub-pages for the different tasks are described on the
following pages.
• Configuration
• Call Control
Menu availability and user roles
• Maintenance
A user possesses one or more user roles. Three user roles
are defined: ADMIN, AUDIT and USER. Note that the default
admin user holds all three roles. 1
The table below shows which menus are available for users
holding the different roles.
ADMIN
AUDIT
USER
Diagnostics
System Information
Log Files
XML Files





Configuration
Advanced Configuration
Wallpaper
Sign In Banner




Configuration
System Information
Advanced Configuration
Call Control
Maintenance
Software Upgrade
Log Files
Wallpaper
Certificate Management
XML Files
Sign In Banner
Audit Certificate
User Administration
Restart
Factory Reset
Call Control

Maintenance
Software Upgrade
Certificate Management
Audit Certificate
User Administration
Restart
Factory Reset
Diagnostics
Open sub-pages


When you hover the mouse over a main menu item,
the titles of related sub-pages appear. 2




You can read more about user administration and user roles in the
User administration section.
Click a sub-page’s title to open it. If there are no
related sub-pages, click the main menu item itself.
1
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
2
The illustration lists all the sub-menus. A user not possessing all user roles will only see the sub-set relevant for his type of user.
17
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
The system information page
You can find an overview of your video system set-up on the
System Information page.
System information
Login information
Information about system name,
product type, software version,
IP address, etc.
Information about recent login
attempts and password expiry.
Diagnostics
System Information
Log Files
XML Files
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
18
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Log files
The log files are Cisco specific debug files which may be
requested by the Cisco support organization if you need
technical support.
The current log files are time stamped event log files.
All current log files are archived in a time stamped historical
log file each time the system reboots.
Click on a log file and follow the instructions in the dialog box
to save or open the file (left or right click depending on your
browser).
You can also download all log files as a bundle; click
the corresponding link on the web page and follow the
instructions.
Diagnostics
System Information
Log Files
XML Files
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
19
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
XML files
The XML files are structured in a hierarchy building up a
database of information about the codec.
Click the file names to open the corresponding file.
• Select configuration.xml to see an overview of the system
settings, which are controlled from the web interface or
from the API (Application Programmer Interface).
• The information in status.xml is constantly updated by the
system to reflect system and process changes. The status
information is normally monitored from the API.
• Select command.xml to see an overview of the commands
available to instruct the system to perform an action. The
commands are issued from the API.
• Select valuespace.xml to see an overview of all the value
spaces used in the system settings, status information, and
commands.
Diagnostics
System Information
Log Files
XML Files
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
20
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Administrator guide
Password protection
Appendices
Contact us
Advanced configuration
The system settings are grouped in several categories. When
you select a category in the left column, all related settings
appear in the window to the right.
Search functionality
Each system setting is further described in the Advanced
settings chapter.
Enter as many letters as needed in
the search field. All settings containing
these letters will be highlighted.
Changing system settings
The value space for a setting is
specified either as a drop down list or
with explanatory text following a text
input field.
Drop down list: Press the down arrow
to open the drop down list. Then select
the preferred value.
Text input field: Enter a new value in
the field and press ok to save the new
value.
Categories
The system settings are structured in several categories.
Select a category to display the related settings to the right.
Configuration
Advanced Configuration
Wallpaper
Sign In Banner
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
21
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Selecting a wallpaper
You can select between a set of predefined wallpapers as
background on your display.
If you want the company logo or another custom picture to be
displayed on the main display, you may also upload and use a
custom wallpaper.
If you use the Touch controller: The custom wallpaper applies
to the main display only and will not appear on the Touch
controller.
Upload a custom wallpaper file
i. Press Browse... and locate your custom
wallpaper image file.
The file format must be .png and the
maximum image size is 1920 × 1200 pixels.
ii.Press Upload to save the file to the codec.
The custom wallpaper is selected
automatically upon upload.
Select a wallpaper
Select a wallpaper from the list.
If you have uploaded a custom
wallpaper, it will also appear in
the list.
The selected wallpaper is
highlighted.
Configuration
Advanced Configuration
Wallpaper
Sign In Banner
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
22
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Sign in banner
If a system administrator wants to provide initial information to
all users, he can create a sign in banner. A sign in banner is a
message that is displayed to the user before signing in.
The message will be shown when the user signs in to the web
interface or the command line interface.
1. Enter text for the sign in banner
Enter the text message which you want
to present to the user prior to signing in.
2. Activate the
sign in banner
Press Save Sign In
Banner to activate it.
Configuration
An active sign in banner
Advanced Configuration
The sign in banner is displayed here.
Wallpaper
Sign In Banner
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
23
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Placing a call
You can use the Call Control page of the web interface to
initiate a call.
Note: Even if the web interface is used to initiate the call it
is the video system (display, microphones and loudspeakers)
that is used for the call; not the PC running the web interface.
Calling someone
Enter one or more characters in the address input field until
the name you want to call appears in the dynamic search list
or, enter the complete name or number. Then press Dial.
Press End all to disconnect the call.
Calling more than one
A point-to-point video call (a call involving two parties only)
may be expanded to include more participants if your system
supports the optional built-in MultiSite feature (up to four
participants, yourself included). The call will then become a
video conference.
When in a call, enter the name or number of the next
participant in the address input field, and then press Dial.
Press End all to terminate the entire conference.
To disconnect just one of the participants, press the
button for that participant.
Sharing contents
Select a Presentation Source from the drop down list, and
press the Start Presentation button.
Address input field
Normally a PC is used as presentation source, but other
options may be available depending on your system setup.
To stop the content sharing, press the Stop Presentation
button that becomes visible while sharing.
Call Control
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
24
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Controlling and monitoring a call
You can control and monitor several call features using the
Call Control page.
Volume control
Adjusting the sound volume
Microphone mute
Use + and - on the volume control bar to adjust the sound
volume of your system (not the keyboard + and - keys).
Muting the microphone
Use the Mute button when you want to deactivate the
microphone for privacy reasons.
When the microphone is muted, the button is replaced by an
Unmute button. Use this button to re-activate the microphone.
Controlling the camera
First, press the Camera Control button. Then, in the window
that opens, use + and - to adjust the zoom and the arrow keys
to adjust the camera’s angle.
If a camera preset is defined it is listed to the right. Apply the
preset by clicking its name.
Call settings
When you load the Call Control page, the default call bit rate
and the default call protocol are shown in the Call bit rate and
Call protocol fields, respectively. If preferred, you can select
another bit rate or another protocol from the drop down lists.
You can not change these settings during a call.
Call details
Press Show details while in a call to provide information on
call rate, encryption, as well as important video and audio
parameters.
Show/hide
call details
Hide details removes the information.
Call bit rate
Call protocol
Camera control
Call Control
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
25
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Local layout control
You can select a local layout using the Call Control page.
The term layout is used to describe the various ways a video
conversation appear on screen. Different types of meetings
will require different layouts.
Each layout will typically specify a screen layout well suited
when you are not in a meeting or you are in a meeting with
one, two or three parties; when the meeting does or does not
involve a second video stream for presentations; when the
screen aspect ratio is 4:3 or 16:9.
Select a layout
Select your preferred layout in the
drop down menu. You may change
the layout while in a call.
Call Control
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
26
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Capturing snapshots
The snapshot feature, which is disabled by default, allows
snapshots captured by your video system to be displayed
on the Call Control page. Captures from your video system’s
camera as well as from its presentation channel will by
displayed.
This feature might come in handy when administering the
video system from a remote location, e.g. to check the
camera view.
To use web snapshots you have to sign in with ADMIN
credentials.
Enabling the snapshot feature
The snapshot feature is disabled by default, and must be
enabled using the Touch controller or the remote control and
on screen menu.
• Touch controller: Tap More > Settings > Administrator
Settings > Web Snapshots and select On.
• Remote control and on screen menu: Go to the
Advanced configuration menu, navigate to Video >
AllowWebSnapshots and select On.
Far end snapshots while in a call
While in a call, snapshots of the remote participant’s main
camera and presentation channel (far end) will be captured
and displayed as shown in the illustration. The snapshots are
updated approximately every 20 seconds.
Far end snapshots
Note: Far end snapshots are captured even if web snapshots
are disallowed on the far end video system. Web snapshots
are prohibited only for encrypted calls.
Take live snapshots
While the Live snapshots box is checked, snapshots
are captured by your video system (main camera
and presentation) approximately every two seconds.
Snapshots from your video system
Call Control
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
27
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Administrator guide
Password protection
Appendices
Contact us
Upgrading the system software
From the Upgrade Software page you can initiate software
upgrades and add a release key and option keys.
Software versions
This video conference system is using TC software.
NOTE: Contact your system administrator if you have
questions about the software version.
Software release notes and upgrade files
For a complete overview of the news and changes, we
recommend reading the Software Release Notes (TC5).
Go to: http://www.cisco.com/en/US/products/ps11422/
tsd_products_support_series_home.html
Downloading new software
For software download, go to: http://www.cisco.com/cisco/
software/navigator.html
Release key
The release key is required to be able to use the released
software. A new release key is required for every major
software release (e.g. from TC4.x to TC5.x).
Contact your Cisco representative to obtain the release key.
Option keys
Option keys allow for extended functionality of the system.
The keys are required to activate the optional functionality. You
may have several option keys in your system.
1. Add the release and option keys
Contact your Cisco representative to obtain the required
key(s). To add a release key and one or more option
keys, complete the following steps:
i. Enter the Release Key and press Add. Key format:
“1TC005-1-0C22E348” (each system has a unique
key).
The available options are:
• Premium resolution
Maintenance
• MultiSite
Software Upgrade
• Dual display (only Codec C40)
Certificate Management
Contact your Cisco representative to obtain the option keys.
ii.Enter the Option Key and
press Add. Key format:
“1N000-1-AA7A4A09”
(each system has a unique
key).
Audit Certificate
User Administration
iii.If you have more than one
option key, repeat step ii
for all of them.
Restart
Factory Reset
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
28
2. Upgrade the software on the codec
i. Before you can start the upgrade you must download
the software upgrade file. The file format is
“s52000tc5_1_0.pkg” (each software version has a
unique file name).
ii.Press Browse... and select the .PKG file.
iii.Press Upgrade to start the installation.
iv.Allow the installation process to complete. It may take
up to 30 minutes. You can follow the progress on the
web page.
The system reboots automatically after the installation,
and the connection to the web interface is lost.
If you want to continue working with the web interface
you must re-establish the connection and sign in
anew.
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Certificate management
The SSL certificate is a text file which verifies the authenticity
of your video conference system. The certificate may be
issued by a certificate authority (CA). Other parties can check
this certificate before setting up communication with you.
The list of trusted CA certificates is a list containing the SSL
certificates of all parties that you want your system to trust.
Uploading the trusted CA certificates list
Uploading the SSL certificate
To install the trusted CA certificates list, you will
need the following:
To install the SSL certificate, you will need the
following:
• Trusted CA list file ( .PEM format).
Contact your system administrator to obtain the
required file.
1.Press Browse... and locate the file with the
Trusted CA list (.PEM format).
2.Press Upload to store the certificate list on
your system.
• HTTPS certificate ( .PEM format)
• Private key ( .PEM format)
• Passphrase (optional)
Contact your system administrator to obtain the
required files.
1.Press Browse... and locate the HTTPS
certificate file (.PEM format).
2.Press Browse... and locate the Private key file
(.PEM format).
3.Enter the Passphrase.
4.Press Upload to store the certificate on your
system.
Maintenance
Software Upgrade
Certificate Management
Audit Certificate
User Administration
Restart
Factory Reset
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
29
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Administrator guide
Password protection
Appendices
Contact us
The audit certificate list
If you want to use the ExternalSecure audit logging mode,
you must upload a list of trusted audit certificates to the video
conference system. This list must cover all audit servers that
your system shall trust.
In the ExternalSecure audit logging mode audit logging
information will only be sent to entities holding a valid audit
certificate.
Note: You must always upload the audit certificate list before
enabling secure audit logging.
About audit logging
Audit logging records all sign in activity and configuration
changes on the system.
1. Upload the audit certificate list
To install the audit certificate, you will
need:
• Audit list file ( .PEM format)
Contact your system administrator to
obtain the required file.
i. Press Browse... and locate the file with
the audit list file (.PEM format).
ii.Press Upload to store the certificate on
your system.
Audit logging is disabled by default. You can enable audit
logging using the on-screen menu or the web interface.
2. Enable secure audit logging
When you have uploaded the audit
certificate list you must enable secure
audit logging:
i. Select Advanced Configuration under
the Configuration tab. Then select
Security in the list of settings groups
on the left hand side.
iii
ii.Enter the Address and Port number of
the audit server.
ii
iii.Select ExternalSecure from the
Logging Mode drop down list.
Maintenance
Software Upgrade
Certificate Management
Audit Certificate
User Administration
i
Restart
Factory Reset
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
30
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
User administration
From this page you can manage the user accounts of your
video conference system. You can create new user accounts,
edit the details of existing users, and delete users.
The default user account
Default user account
The system comes with a default administrator user account
with username admin and no password set. The admin user
has full access rights, and it is highly recommended to set a
password for this user.
The system comes with
admin as the default
user account. This user
has full access rights.
Read more about passwords in the Password protection
chapter.
About user roles
A user account must hold one or a combination of several
user roles. Three user roles exist, representing different
rights:
• ADMIN: A user holding this role can create new users and
change all settings, except the security audit settings. He
cannot upload audit certificates.
• USER: A user holding this role can make calls and search
the phonebook.
• AUDIT: A user holding this role can change the security
audit configurations and upload audit certificates.
It is important to note that these three roles have nonoverlapping rights.
An administrator user account with full access rights, like the
default admin user, must possess all the three roles.
Security mode
You can enable/disable the strong security mode from this
page. You must read the warning carefully and check the
I understand the risks... box before you can enable the strong
security mode.
Strong security mode sets very strict password requirements,
and requires all users to change their password on the next
sign in.
Software upload from TMS, web snapshots and making calls
from the web interface are prohibited in strong security mode.
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
Maintenance
Software Upgrade
Certificate Management
Audit Certificate
User Administration
Restart
Factory Reset
31
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Creating a new user account
1.Press Create new user.
2.Fill in the Username, Password and PIN code, and select
the user role(s) for this user account.
As a default the user have to change the password and PIN
code when signing in for the first time.
Do not fill in the Distinguished Name (DN) Subject field
unless you want to use certificate login on https.
3.Set the Status to Active to activate the user.
4.Press Save to save the changes.
Editing user details
1.Select the name of an existing user to open the Editing
user window.
2.Edit the details.
3.Press Save to save the changes or Cancel to go back one
step without storing the information.
Deactivating a user account
1.Select the name of an existing user to open the Editing
user window.
2.Set the Status to Inactive.
3.Press Save to save the changes.
NOTE: Always keep at least one user with ADMIN rights
Active.
Deleting a user account
1.Select the name of the user to open the Editing user
window.
2.Press Delete.
NOTE: Always keep at least one user with ADMIN rights
Active.
Maintenance
Software Upgrade
Certificate Management
Audit Certificate
User Administration
Restart
Factory Reset
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
32
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Restarting the system
To restart the system, press Restart now.
Restarting the system takes a few minutes.
Maintenance
Software Upgrade
Certificate Management
Audit Certificate
User Administration
Restart
Factory Reset
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
33
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Factory reset
When performing a factory reset the call logs will be deleted
and all system parameters will be reset to default values. All
files that have been uploaded to the codec will be deleted.
Release keys and option keys will be preserved.
Note: It is not possible to undo a factory reset.
Read the provided information carefully before you perform a
factory reset. Then check the I want to reset... box, and finally
press Perform a factory reset.
Wait while the system resets. The system will reboot
automatically when finished.
Maintenance
Software Upgrade
Certificate Management
Audit Certificate
User Administration
Restart
Factory Reset
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
34
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Chapter 3
Advanced settings
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
35
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Overview of the advanced settings
In the following pages you will find a complete list of the system settings which are configured
from the Advanced configuration menu on screen or from the Advanced Configuration page on the
web interface. The examples show either the default value or an example of a value.
If you use the web interface, open a web browser and enter the IP address of your system, sign in,
open the Configuration tab and select Advanced Configuration.
You will find the IP address on the System Information page, which you can access either using
the Touch controller (More > Settings > System Information) or using the remote control and onscreen menu (Home > Settings > System Information).
If you use the menu on screen, open the Home menu with the remote control and go to Settings >
Administrator settings > Advanced configuration.
The Audio settings................................................................................................................. 40
Audio Input HDMI [2] Level.....................................................................................................40
Audio Input HDMI [2] Mode.....................................................................................................40
Audio Input HDMI [2] VideoAssociation MuteOnInactiveVideo................................................40
Audio Input HDMI [2] VideoAssociation VideoInputSource......................................................40
Audio Input Line [1..2] Channel..............................................................................................40
Audio Input Line [1..2] Equalizer ID.........................................................................................40
Audio Input Line [1..2] Equalizer Mode...................................................................................40
Audio Input Line [1..2] Level...................................................................................................41
Audio Input Line [1..2] LoopSuppression................................................................................41
Audio Input Line [1..2] Mode..................................................................................................41
Audio Input Line [1..2] VideoAssociation MuteOnInactiveVideo..............................................40
Audio Input Line [1..2] VideoAssociation VideoInputSource...................................................40
Audio Input Microphone [1..2]/[1..4] EchoControl Mode.........................................................41
Audio Input Microphone [1..2]/[1..4] EchoControl NoiseReduction.........................................41
Audio Input Microphone [1..2]/[1..4] Equalizer ID....................................................................41
Audio Input Microphone [1..2]/[1..4] Equalizer Mode..............................................................41
Audio Input Microphone [1..2]/[1..4] Level..............................................................................42
Audio Input Microphone [1..2]/[1..4] Mode.............................................................................42
Audio Input Microphone [1..2]/[1..4] Type..............................................................................42
Audio Input Microphone [1..2]/[1..4] VideoAssociation MuteOnInactiveVideo.........................42
Audio Input Microphone [1..2]/[1..4] VideoAssociation VideoInputSource..............................42
Audio Input Microphone [1..4] EchoControl Dereverberation..................................................41
Audio Microphones Mute Enabled..........................................................................................43
Audio Output HDMI [1] Level..................................................................................................42
Audio Output HDMI [1] Mode..................................................................................................42
Audio Output Line [1..2] Channel............................................................................................42
Audio Output Line [1..2] Equalizer ID......................................................................................43
Audio Output Line [1..2] Equalizer Mode................................................................................43
Audio Output Line [1..2] Level................................................................................................43
Audio Output Line [1..2] Mode................................................................................................43
Audio Output Line [1] Type.....................................................................................................43
Audio Output Line [2] Type.....................................................................................................43
Audio SoundsAndAlerts KeyTones Mode...............................................................................43
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
Audio SoundsAndAlerts RingTone..........................................................................................44
Audio SoundsAndAlerts RingVolume......................................................................................44
Audio Volume.........................................................................................................................44
The Cameras settings............................................................................................................. 44
Cameras Camera [1..7] Backlight...........................................................................................44
Cameras Camera [1..7] Brightness Level...............................................................................44
Cameras Camera [1..7] Brightness Mode...............................................................................44
Cameras Camera [1..7] DHCP................................................................................................46
Cameras Camera [1..7] Flip....................................................................................................45
Cameras Camera [1..7] Focus Mode......................................................................................45
Cameras Camera [1..7] Gamma Level....................................................................................45
Cameras Camera [1..7] Gamma Mode...................................................................................45
Cameras Camera [1..7] IrSensor............................................................................................45
Cameras Camera [1..7] Mirror................................................................................................45
Cameras Camera [1..7] Whitebalance Level...........................................................................45
Cameras Camera [1..7] Whitebalance Mode..........................................................................45
Cameras PowerLine Frequency..............................................................................................44
The Conference settings........................................................................................................ 46
Conference [1..1] AutoAnswer Delay.....................................................................................46
Conference [1..1] AutoAnswer Mode.....................................................................................46
Conference [1..1] AutoAnswer Mute......................................................................................46
Conference [1..1] DefaultCall Protocol...................................................................................47
Conference [1..1] DefaultCall Rate.........................................................................................47
Conference [1..1] DoNotDisturb Mode...................................................................................47
Conference [1..1] Encryption Mode........................................................................................47
Conference [1..1] FarEndControl Mode..................................................................................47
Conference [1..1] FarEndControl SignalCapability..................................................................47
Conference [1..1] IncomingMultisiteCall Mode.......................................................................49
Conference [1..1] MaxReceiveCallRate..................................................................................48
Conference [1..1] MaxTransmitCallRate.................................................................................47
Conference [1..1] MicUnmuteOnDisconnect Mode................................................................46
Conference [1..1] Multipoint Mode.........................................................................................48
36
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Conference [1..1] PacketLossResilience Mode......................................................................48
Conference [1..1] Presentation Policy....................................................................................48
Conference [1..1] VideoBandwidth MainChannel Weight.......................................................48
Conference [1..1] VideoBandwidth Mode...............................................................................48
Conference [1..1] VideoBandwidth PresentationChannel Weight...........................................48
The GPIO settings.................................................................................................................. 50
GPIO Pin [1..4] Mode..............................................................................................................50
The H323 settings.................................................................................................................. 51
H323 NAT Address.................................................................................................................51
H323 NAT Mode.....................................................................................................................51
H323 Profile [1..1] Authentication LoginName........................................................................51
H323 Profile [1..1] Authentication Mode.................................................................................51
H323 Profile [1..1] Authentication Password..........................................................................51
H323 Profile [1..1] CallSetup Mode........................................................................................51
H323 Profile [1..1] Gatekeeper Address.................................................................................52
H323 Profile [1..1] Gatekeeper Discovery...............................................................................52
H323 Profile [1..1] H323Alias E164........................................................................................52
H323 Profile [1..1] H323Alias ID.............................................................................................52
H323 Profile [1..1] PortAllocation............................................................................................52
Contact us
The NetworkPort settings....................................................................................................... 57
NetworkPort [2] Mode............................................................................................................57
The NetworkServices settings................................................................................................ 57
NetworkServices H323 Mode................................................................................................57
NetworkServices HTTP Mode.................................................................................................58
NetworkServices HTTPS Mode..............................................................................................58
NetworkServices HTTPS OCSP Mode....................................................................................58
NetworkServices HTTPS OCSP URL......................................................................................58
NetworkServices HTTPS VerifyClientCertificate.....................................................................58
NetworkServices HTTPS VerifyServerCertificate....................................................................58
NetworkServices MultiWay Address.......................................................................................57
NetworkServices MultiWay Protocol.......................................................................................57
NetworkServices NTP Address...............................................................................................58
NetworkServices NTP Mode..................................................................................................58
NetworkServices SIP Mode....................................................................................................59
NetworkServices SNMP CommunityName.............................................................................59
NetworkServices SNMP Host [1..3] Address..........................................................................59
NetworkServices SNMP Mode...............................................................................................59
NetworkServices SNMP SystemContact................................................................................59
NetworkServices SNMP SystemLocation...............................................................................59
NetworkServices SSH AllowPublicKey....................................................................................59
NetworkServices SSH Mode..................................................................................................59
NetworkServices Telnet Mode................................................................................................59
The Network settings.............................................................................................................. 53
Network [1..1] Assignment.....................................................................................................53
Network [1..1] DNS Domain Name.........................................................................................53
Network [1..1] DNS Server [1..5] Address..............................................................................53
Network [1..1] IEEE8021X AnonymousIdentity.......................................................................55
Network [1..1] IEEE8021X Eap Md5.......................................................................................55
Network [1..1] IEEE8021X Eap Peap......................................................................................56
Network [1..1] IEEE8021X Eap Tls..........................................................................................56
Network [1..1] IEEE8021X Eap Ttls.........................................................................................55
Network [1..1] IEEE8021X Identity..........................................................................................55
Network [1..1] IEEE8021X Mode............................................................................................55
Network [1..1] IEEE8021X Password......................................................................................55
Network [1..1] IEEE8021X TlsVerify........................................................................................55
Network [1..1] IEEE8021X UseClientCertificate......................................................................55
Network [1..1] IPStack............................................................................................................53
Network [1..1] IPv4 Address...................................................................................................53
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
Appendices
Network [1..1] IPv4 Gateway..................................................................................................53
Network [1..1] IPv4 SubnetMask............................................................................................53
Network [1..1] IPv6 Address...................................................................................................53
Network [1..1] IPv6 Assignment.............................................................................................54
Network [1..1] IPv6 DHCPOptions..........................................................................................54
Network [1..1] IPv6 Gateway..................................................................................................53
Network [1..1] MTU................................................................................................................56
Network [1..1] QoS Diffserv Audio..........................................................................................54
Network [1..1] QoS Diffserv Data............................................................................................54
Network [1..1] QoS Diffserv Signalling....................................................................................54
Network [1..1] QoS Diffserv Video..........................................................................................54
Network [1..1] QoS Mode.......................................................................................................54
Network [1..1] RemoteAccess Allow......................................................................................56
Network [1..1] Speed.............................................................................................................56
Network [1..1] TrafficControl Mode.........................................................................................56
Network [1..1] VLAN Voice Mode...........................................................................................56
Network [1..1] VLAN Voice VlanId..........................................................................................56
The FacilityService settings.................................................................................................... 49
FacilityService Service [1..5] CallType....................................................................................50
FacilityService Service [1..5] Name........................................................................................49
FacilityService Service [1..5] Number.....................................................................................50
FacilityService Service [1..5] Type..........................................................................................49
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Password protection
Administrator guide
37
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
The Phonebook settings......................................................................................................... 60
Phonebook Server [1..1] ID....................................................................................................60
Phonebook Server [1..1] Type................................................................................................60
Phonebook Server [1..1] URL.................................................................................................60
Contact us
The SystemUnit settings......................................................................................................... 66
SystemUnit CallLogging Mode................................................................................................67
SystemUnit ContactInfo Type.................................................................................................66
SystemUnit IrSensor...............................................................................................................67
SystemUnit MenuLanguage....................................................................................................66
SystemUnit Name...................................................................................................................66
SystemUnit Type....................................................................................................................67
The Time settings................................................................................................................... 67
Time DateFormat....................................................................................................................68
Time TimeFormat....................................................................................................................68
Time Zone..............................................................................................................................67
The RTP settings.................................................................................................................... 62
RTP Ports Range Start............................................................................................................62
RTP Ports Range Stop............................................................................................................62
The Security settings.............................................................................................................. 62
Security Audit Logging Mode.................................................................................................63
Security Audit OnError Action.................................................................................................62
Security Audit Server Address................................................................................................62
Security Audit Server Port......................................................................................................62
Security Session InactivityTimeout.........................................................................................63
Security Session ShowLastLogon..........................................................................................63
The UserInterface settings...................................................................................................... 68
UserInterface TouchPanel DefaultPanel..................................................................................68
The Video settings.................................................................................................................. 69
Video AllowWebSnapshots.....................................................................................................73
Video DefaultPresentationSource...........................................................................................70
Video Input DVI [3]/[2..3] Type................................................................................................71
Video Input Source [1..3] CameraControl CameraId...............................................................69
Video Input Source [1..3] CameraControl Mode.....................................................................69
Video Input Source [1..3] Name.............................................................................................69
Video Input Source [1..3] OptimalDefinition Profile.................................................................70
Video Input Source [1..3] OptimalDefinition Threshold60fps..................................................70
Video Input Source [1..3] Quality............................................................................................70
Video Input Source [1..3] Type...............................................................................................69
Video Input Source [1] Connector..........................................................................................69
Video Input Source [2] Connector..........................................................................................69
Video Input Source [3] Connector..........................................................................................69
Video Layout LocalLayoutFamily.............................................................................................72
Video Layout RemoteLayoutFamily.........................................................................................72
Video Layout ScaleToFrame...................................................................................................71
Video Layout ScaleToFrameThreshold....................................................................................71
Video Layout Scaling..............................................................................................................71
Video MainVideoSource.........................................................................................................72
Video Monitors.......................................................................................................................72
The SerialPort settings........................................................................................................... 63
SerialPort BaudRate................................................................................................................63
SerialPort LoginRequired........................................................................................................63
SerialPort Mode......................................................................................................................63
The SIP settings..................................................................................................................... 64
SIP Profile [1..1] Authentication [1..1] LoginName..................................................................64
SIP Profile [1..1] Authentication [1..1] Password.....................................................................64
SIP Profile [1..1] DefaultTransport...........................................................................................64
SIP Profile [1..1] DisplayName................................................................................................64
SIP Profile [1..1] Outbound.....................................................................................................64
SIP Profile [1..1] Proxy [1..4] Address.....................................................................................64
SIP Profile [1..1] Proxy [1..4] Discovery..................................................................................65
SIP Profile [1..1] TlsVerify.......................................................................................................64
SIP Profile [1..1] Type.............................................................................................................65
SIP Profile [1..1] URI...............................................................................................................64
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
Appendices
The Standby settings.............................................................................................................. 65
Standby BootAction................................................................................................................65
Standby Control......................................................................................................................65
Standby Delay........................................................................................................................65
Standby StandbyAction..........................................................................................................66
Standby WakeupAction..........................................................................................................66
The Provisioning settings........................................................................................................ 60
Provisioning Connectivity........................................................................................................60
Provisioning ExternalManager Address...................................................................................61
Provisioning ExternalManager Domain....................................................................................61
Provisioning ExternalManager Path.........................................................................................61
Provisioning ExternalManager Protocol...................................................................................61
Provisioning HttpMethod.........................................................................................................61
Provisioning LoginName.........................................................................................................60
Provisioning Mode..................................................................................................................60
Provisioning Password............................................................................................................61
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Password protection
Administrator guide
38
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Video OSD AutoSelectPresentationSource............................................................................72
Video OSD InputMethod Cyrillic..............................................................................................73
Video OSD InputMethod InputLanguage.................................................................................73
Video OSD LoginRequired......................................................................................................73
Video OSD Mode....................................................................................................................72
Video OSD MyContactsExpanded..........................................................................................73
Video OSD Output..................................................................................................................73
Video OSD TodaysBookings...................................................................................................72
Video Output Composite [3] MonitorRole...............................................................................75
Video Output Composite [3] OverscanLevel...........................................................................75
Video Output Composite [3] Resolution..................................................................................75
Video Output DVI [2] MonitorRole...........................................................................................74
Video Output DVI [2] OverscanLevel.......................................................................................74
Video Output DVI [2] Resolution..............................................................................................75
Video Output HDMI [1] CEC Mode..........................................................................................74
Video Output HDMI [1] MonitorRole........................................................................................74
Video Output HDMI [1] OverscanLevel....................................................................................74
Video Output HDMI [1] Resolution..........................................................................................74
Video Selfview........................................................................................................................75
Video SelfviewPosition...........................................................................................................71
Video WallPaper.....................................................................................................................75
Password protection
Administrator guide
Appendices
Contact us
Experimental CTMSSupport Mode.........................................................................................79
Experimental CustomSoftbuttons HoldResume......................................................................78
Experimental CustomSoftbuttons State [1..2] SoftButton [1..5] Type.....................................79
Experimental CustomSoftbuttons State [1..2] SoftButton [1..5] Value....................................79
Experimental NetworkServices UPnP Mode...........................................................................79
Experimental NetworkServices UPnP Timeout.......................................................................79
Experimental SystemUnit Controller Address.........................................................................79
Experimental SystemUnit CrashReporting Mode....................................................................79
Experimental SystemUnit CrashReporting URI........................................................................79
Experimental SystemUnit MenuType......................................................................................79
Experimental SystemUnit SoftwareUpgrade RequireAuthentication.......................................79
The Experimental settings...................................................................................................... 76
Experimental Audio EcReferenceDelay...................................................................................76
Experimental Audio Input Microphone [1..2]/[1..4] Channel....................................................76
Experimental Audio Input Microphone [1..2]/[1..4] EchoControl HighPassFilter......................76
Experimental Audio Input Microphone [1..2]/[1..4] EchoControl ResidualEchoMasking..........76
Experimental Audio MicrophoneReinforcement AGC..............................................................77
Experimental Audio MicrophoneReinforcement Gain..............................................................77
Experimental Audio MicrophoneReinforcement Input Microphone [1..4] Mode......................77
Experimental Audio MicrophoneReinforcement Output Line [1..2] Mode...............................77
Experimental Audio Panning MaxAngle..................................................................................76
Experimental Audio Panning Mode.........................................................................................76
Experimental Audio Panning MonitorLeft................................................................................76
Experimental Audio Panning MonitorRight..............................................................................76
Experimental CapsetFilter.......................................................................................................77
Experimental CapsetReduction...............................................................................................77
Experimental Conference [1..1] Multistream InputCount.........................................................78
Experimental Conference [1..1] Multistream Mode.................................................................78
Experimental Conference [1..1] Multistream OutputCount......................................................78
Experimental Conference [1..1] Multistream Stream [1..4] Source.........................................78
Experimental Conference [1..1] PacketLossResilience ForwardErrorCorrection.....................78
Experimental Conference [1..1] PacketLossResilience RateAdaption.....................................78
Experimental Conference [1..1] ReceiverBasedDownspeeding..............................................78
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
39
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
The Audio settings
Password protection
Administrator guide
Appendices
Contact us
Audio Input Line [1..2] Equalizer ID
Select the audio input line equalizer ID.
Requires user role: ADMIN
Audio Input HDMI [2] Mode
Value space: <1..8>
Range: Select EqualizerID 1 to 8.
Determine if the audio channels on the HDMI input shall be enabled. The HDMI input 2 has two
audio channels.
Example: Audio Input Line 1 Equalizer ID: 1
Requires user role: ADMIN
Value space: <On/Off>
On: Enable the audio channels on the HDMI input.
Off: Disable the audio channels on the HDMI input.
Audio Input Line [1..2] Equalizer Mode
Set the audio input line equalizer mode.
Requires user role: ADMIN
Example: Audio Input HDMI 2 Mode: On
Value space: <On/Off>
On: Enable the equalizer for the audio input line.
Off: No equalizer.
Audio Input HDMI [2] Level
Define the audio level of the HDMI input connector, in steps of 1 dB.
Example: Audio Input Line 1 Equalizer Mode: Off
See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete overview
of the menu values represented in dB.
Audio Input Line [1..2] VideoAssociation MuteOnInactiveVideo
Requires user role: ADMIN
Enable association of a video source to a Line audio input.
Value space: <-24..0>
Range: Select a value from -24 to 0 dB.
Requires user role: ADMIN
Value space: <On/Off>
On: A video source is associated, and the audio will be muted if the associated video source is
not displayed.
Off: No video source is associated.
Example: Audio Input HDMI 2 Level: 0
Audio Input HDMI [2] VideoAssociation MuteOnInactiveVideo
Enable association of a video source to an HDMI audio input.
Example: Audio Input Line 1 VideoAssociation MuteOnInactiveVideo: Off
Requires user role: ADMIN
Value space: <On/Off>
On: A video source is associated, and the audio will be muted if the associated video source is
not displayed.
Off: No video source is associated.
Audio Input Line [1..2] VideoAssociation VideoInputSource
Example: Audio Input HDMI 2 VideoAssociation MuteOnInactiveVideo: Off
Value space: <1/2/3>
Range: Select one of the video input sources.
Audio Input HDMI [2] VideoAssociation VideoInputSource
Example: Audio Input Line 1 VideoAssociation VideoInputSource: 1
Select the associated video input source.
Requires user role: ADMIN
Select the associated video input source.
Audio Input Line [1..2] Channel
Requires user role: ADMIN
Define whether the Audio Line input is a mono signal or part of a multichannel signal.
Value space: <1/2/3>
Range: Select one of the video input sources.
Requires user role: ADMIN
Value space: <Left/Right/Mono>
Left: The Audio Line input signal is the left channel of a stereo signal.
Right: The Audio Line input signal is the right channel of a stereo signal.
Mono: The Audio Line input signal is a mono signal.
Example: Audio Input HDMI 2 VideoAssociation VideoInputSource: 1
Example: Audio Input 1 Channel: Left
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
40
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Audio Input Line [1..2] Level
Audio Input Microphone [1..2]/[1..4] EchoControl NoiseReduction
Define the audio level of the Line input connector, in steps of 1 dB.
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone connectors.
See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete overview
of the menu values represented in dB.
The system has a built-in noise reduction which reduces constant background noise (e.g.
noise from air-conditioning systems, cooling fans etc.). In addition, a high pass filter (Humfilter)
reduces very low frequency noise. NOTE: Requires the Echo Control Mode to be enabled for the
microphone.
Requires user role: ADMIN
Value space: <0..24>
Range: Select a value from 0 to 24 dB.
Requires user role: ADMIN
Value space: <On/Off>
On: The Noise Reduction should be enabled in the presence of low frequency noise.
Off: Turn off the Noise Reduction.
Example: Audio Input Line 1 Level: 10
Audio Input Line [1..2] LoopSuppression
Example: Audio Input Microphone 1 EchoControl NoiseReduction: On
NOTE: Codec C40/C60 does currently not support Loop Suppression, hence Loop Suppression
can be set to Off only.
Audio Input Microphone [1..4] EchoControl Dereverberation
Requires user role: ADMIN
The system has built-in signal processing to reduce the effect of room reverberation. NOTE:
Requires the Echo Control Mode to be enabled for the microphone.
Value space: <Off>
Off: Deactivate Loop Suppression.
Requires user role: ADMIN
Example: Audio Input Line 1 LoopSuppression: Off
Value space: <On/Off>
On: Turn on the dereverberation.
Off: Turn off the dereverberation.
Audio Input Line [1..2] Mode
Set the audio input line mode.
Example: Audio Input Microphone 1 EchoControl Dereverberation: On
Requires user role: ADMIN
Value space: <On/Off>
On: Enable the Audio Line input.
Off: Disable the Audio Line input.
Audio Input Microphone [1..2]/[1..4] Equalizer ID
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone connectors.
Select the audio input microphone equalizer ID.
Example: Audio Input Line 1 Mode: On
Requires user role: ADMIN
Value space: <1..17>
Range: Select Equalizer ID 1 to 17.
Audio Input Microphone [1..2]/[1..4] EchoControl Mode
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone connectors.
Example: Audio Input Microphone 1 Equalizer ID: 1
The echo canceller continuously adjusts itself to the audio characteristics of the room and
compensate for any changes it detects in the audio environment. If the changes in the audio
conditions are very significant the echo canceller may take a second or two to re-adjust.
Audio Input Microphone [1..2]/[1..4] Equalizer Mode
Requires user role: ADMIN
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone connectors.
Value space: <On/Off>
On: Echo Control is normally set to On to prevent the far end from hearing their own audio.
Once selected, echo cancellation is active at all times.
Off: Echo Control should be switched Off if external echo cancellation or playback equipment is
used.
Set the audio input microphone equalizer mode.
Example: Audio Input Microphone 1 EchoControl Mode: On
Example: Audio Input Microphone 1 Equalizer Mode: Off
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
Requires user role: ADMIN
Value space: <On/Off>
On: Enable the equalizer for the audio input microphone.
Off: No equalizer.
41
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Audio Input Microphone [1..2]/[1..4] VideoAssociation MuteOnInactiveVideo
Audio Input Microphone [1..2]/[1..4] Type
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone connectors.
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone connectors.
Enable association of a video source to a microphone audio input.
The microphone connectors are intended for electret type microphones. The microphone
connector can be set to line or microphone mode.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <On/Off>
On: A video source is associated, and the audio will be muted if the associated video source is
not displayed.
Off: No video source is associated.
Value space: <Microphone/Line>
Microphone: Select Microphone when you have 48 V Phantom voltage and the pre-amplification
is On.
Line: Select Line when you have a standard balanced line input. The phantom voltage and preamplification is Off.
Example: Audio Input Microphone 1 VideoAssociation MuteOnInactiveVideo: On
Example: Audio Input Microphone 1 Type: Line
Audio Input Microphone [1..2]/[1..4] VideoAssociation VideoInputSource
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone connectors.
Audio Output HDMI [1] Level
Select the associated video input source.
Define the output level of the HDMI output connector, in steps of 1 dB.
Requires user role: ADMIN
See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete overview
of the menu values represented in dB.
Value space: <1/2/3>
Range: Select one of the video input sources.
Requires user role: ADMIN
Example: Audio Input Microphone 1 VideoAssociation VideoInputSource: 1
Value space: <-24..0>
Range: Select a value from -24 to 0dB.
Audio Input Microphone [1..2]/[1..4] Level
Example: Audio Output HDMI 1 Level: 0
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone connectors.
Define the audio level of the Microphone input connector, in steps of 1 dB.
Audio Output HDMI [1] Mode
See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete overview
of the values represented in dB.
Determine if the audio channel on the HDMI output connector shall be enabled.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <On/Off>
On: Enable the audio channel on the HDMI output.
Off: Disable the audio channel on the HDMI output.
Value space: <0..24>
Range: Select a value from 0 to 24 dB.
Example: Audio Input Microphone 1 Level: 15
Example: Audio Output HDMI 1 Mode: On
Audio Input Microphone [1..2]/[1..4] Mode
Audio Output Line [1..2] Channel
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone connectors.
Define whether the Audio Line output is a mono signal or part of a multichannel signal.
Set the audio input microphone mode.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <On/Off>
On: Enable the microphone connector.
Off: Disable the microphone connector.
Value space: <Left/Right/Mono>
Left: The Audio Line output signal is the left channel of a stereo signal.
Right: The Audio Line output signal is the right channel of a stereo signal.
Mono: The Audio Line output signal is a mono signal.
Example: Audio Input Microphone 1 Mode: On
Example: Audio Output Line 1 Channel: left
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
42
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Audio Output Line [1..2] Equalizer ID
Audio Output Line [1] Type
Select the audio output line equalizer ID.
Determine if the Audio Line output will be analog or digital type output. The digital output on the
Cisco TelePresence Profile systems are identified as DNAM (Digital Natural Audio Module).
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <1..8>
Range: Select EqualizerID 1 to 8.
Value space: <Auto/SPDIF>
Auto: If a Digital NAM is detected then SPDIF mode will be selected, otherwise analog mode will
be selected.
SPDIF: Set to SPDIF when you want the line output to be in digital mode.
Example: Audio Output Line 1 Equalizer ID: 1
Audio Output Line [1..2] Equalizer Mode
Example: Audio Output Line 1 Type: Auto
Set the audio output line equalizer mode.
Requires user role: ADMIN
Audio Output Line [2] Type
Value space: <On/Off>
On: Enable the equalizer for the audio output line.
Off: No equalizer.
Line output 2 is a dedicated analog output, hence type can be set to analog only.
Requires user role: ADMIN
Example: Audio Output Line 1 Equalizer Mode: Off
Value space: <Analog>
Analog: Can be set to analog only.
Audio Output Line [1..2] Level
Example: Audio Output Line 2 Type: Analog
Define the output level of the Audio Output Line connector, in steps of 1 dB.
Audio Microphones Mute Enabled
See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete overview
of the menu values represented in dB.
Determine whether audio-mute is allowed or not. The default value is True.
Requires user role: ADMIN
Requires user role: ADMIN
Audio Output Line [1..2] Mode
Value space: <True/InCallOnly>
True: Muting of audio is always available.
InCallOnly: Muting of audio is only available when the device is in a call. When Idle it is not
possible to mute the microphone. This is useful when an external telephone service/audio
system is connected via the codec and is to be available when the codec is not in a call. When
set to InCallOnly this will prevent the audio-system from being muted by mistake.
Set the audio output line mode.
Example: Audio Microphones Mute Enabled: True
Value space: <-24..0>
Range: Select a value from -24 to 0 dB.
Example: Audio Output Line 1 Level: -10
Requires user role: ADMIN
Value space: <On/Off>
On: Enable the Audio Line output.
Off: Disable the Audio Line output.
Audio SoundsAndAlerts KeyTones Mode
Example: Audio Output Line 1 Mode: On
Value space: <On/Off>
On: There will be a sound indicator when pressing keys on the remote control.
Off: The remote control Key Tones is switched off.
The system can produce a sound every time a key on the remote control is pressed.
Requires user role: USER
Example: Audio SoundsAndAlerts KeyTones Mode: Off
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
43
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
The Cameras settings
Audio SoundsAndAlerts RingTone
Select the ring tone for incoming calls.
Requires user role: USER
Cameras PowerLine Frequency
Value space: <Marbles/IceCrystals/Polaris/Alert/Discreet/Fantasy/Jazz/
Nordic/Echo/Rhythmic>
Range: Select a tone from the list of ring tones.
Applies to cameras supporting PowerLine frequency anti-flickering, i.e PrecisionHD 1080p
cameras.
Requires user role: ADMIN
Example: Audio SoundsAndAlerts RingTone: Jazz
Value space: <Auto/50Hz/60Hz>
Auto: Set to Auto to enable power frequency auto detection in the camera.
50Hz: Set to 50 Hz.
60Hz: Set to 60 Hz.
Audio SoundsAndAlerts RingVolume
Sets the ring tone volume for an incoming call.
Requires user role: USER
Example: Cameras PowerLine Frequency: Auto
Value space: <0..100>
Range: The value goes in steps of 5 from 0 to 100 (from -34.5 dB to 15 dB). Volume 0 = Off.
Cameras Camera [1..7] Backlight
Example: Audio SoundsAndAlerts RingVolume: 50
Audio Volume
This configuration turns backlight compensation on or off. Backlight compensation is useful when
there is much light behind the persons in the room. Without compensation the persons will easily
appear very dark to the far end.
Set the volume on the loudspeaker.
Requires user role: ADMIN
Requires user role: USER
Value space: <0..100>
Range: The value goes in steps of 5 from 0 to 100 (from -34.5 dB to 15 dB). Value 0 = Off.
Value space: <On/Off>
On: Turn on the camera backlight compensation.
Off: Turn off the camera backlight compensation.
Example: Audio Volume: 70
Example: Cameras Camera 1 Backlight: Off
Cameras Camera [1..7] Brightness Mode
Set the camera brightness mode.
Requires user role: ADMIN
Value space: <Auto/Manual>
Auto: The camera brightness is automatically set by the system.
Manual: Enable manual control of the camera brightness, e.g. the level of the brightness level
setting will be used for the camera.
Example: Cameras Camera 1 Brightness Mode: Auto
Cameras Camera [1..7] Brightness Level
Set the brightness level. NOTE: Requires the Camera Brightness Mode to be set to Manual.
Requires user role: ADMIN
Value space: <1..31>
Range: Select a value from 1 to 31.
Example: Cameras Camera 1 Brightness Level: 1
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
44
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Cameras Camera [1..7] Flip
Cameras Camera [1..7] IrSensor
With Flip mode (vertical flip) you can flip the image upside down.
The IR sensor LED is located in the front of the camera and flickers when the IR sensor is activated
from the remote control. Both the Codec C Series and PrecisionHD camera have IR sensors, and
only one of them needs to be enabled at the time.
Requires user role: ADMIN
Value space: <Auto/On/Off>
Auto: When the camera is placed upside down the image is automatically flipped upside down.
This setting will only take effect for a camera that automatically detects which way it is mounted.
On: When enabled the video on screen is flipped. This setting is used when a camera is
mounted upside down, but cannot automatically detect which way it is mounted.
Off: Display the video on screen the normal way.
Requires user role: ADMIN
Value space: <On/Off>
On: Enable the IR sensor on the camera.
Off: Disable the IR sensor on the camera.
Example: Cameras Camera 1 IrSensor: On
Example: Cameras Camera 1 Flip: Off
Cameras Camera [1..7] Mirror
Cameras Camera [1..7] Focus Mode
With Mirror mode (horizontal flip) you can mirror the image on screen.
Set the camera focus mode.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <Auto/On/Off>
Auto: When the camera is placed upside down the image is automatically mirrored. Use this
setting with cameras that can be mounted upside down, and that can auto detect that the
camera is mounted upside down.
On: See the selfview in mirror mode, e.g. the selfview is reversed and the experience of
selfview is as seeing yourself in a mirror.
Off: See the selfview in normal mode, e.g. the experience of selfview is as seeing yourself as
other people see you.
Value space: <Auto/Manual>
Auto: The camera will auto focus once a call is connected, as well as after moving the camera
(pan, tilt, zoom). The system will use auto focus only for a few seconds to set the right focus;
then auto focus is turned off to prevent continuous focus adjustments of the camera.
Manual: Turn the autofocus off and adjust the camera focus manually.
Example: Cameras Camera 1 Focus Mode: Auto
Example: Cameras Camera 1 Mirror: Off
Cameras Camera [1..7] Gamma Mode
Applies to cameras which support gamma mode. The Gamma Mode setting enables for gamma
corrections. Gamma describes the nonlinear relationship between image pixels and monitor
brightness. The Cisco TelePresence PrecisionHD 720p camera supports gamma mode. The
PrecisionHD 1080p camera does not support gamma mode.
Cameras Camera [1..7] Whitebalance Mode
Set the camera whitebalance mode.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <Auto/Manual>
Auto: The camera will continuously adjust the whitebalance depending on the camera view.
Manual: Enables manual control of the camera whitebalance, e.g. the level of the whitebalance
level setting will be used for the camera.
Value space: <Auto/Manual>
Auto: Auto is the default and the recommended setting.
Manual: In severe light conditions, you may switch mode to manual and specify explicitly which
gamma table to use by setting the Gamma Level.
Example: Cameras Camera 1 Whitebalance Mode: Auto
Example: Cameras Camera 1 Gamma Mode: Auto
Cameras Camera [1..7] Whitebalance Level
Cameras Camera [1..7] Gamma Level
Set the whitebalance level. NOTE: Requires the Camera Whitebalance Mode to be set to manual.
By setting the Gamma Level you can select which gamma correction table to use. This setting may
be useful in difficult lighting conditions, where changes to the brightness setting does not provide
satisfactory results. NOTE: Requires the Gamma Mode to be set to Manual.
Requires user role: ADMIN
Value space: <1..16>
Range: Select a value from 1 to 16.
Requires user role: ADMIN
Example: Cameras Camera 1 Whitebalance Level: 1
Value space: <0..7>
Range: Select a value from 0 to 7.
Example: Cameras Camera 1 Gamma Level: 0
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
45
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
The Conference settings
Cameras Camera [1..7] DHCP
Applies to cameras which support DHCP. The Cisco TelePresence PrecsisionHD 1080p camera
supports DHCP. The camera must be connected to a LAN. When set, the command enables
support for SW upgrade of daisy chained cameras. It will enable the camera's DHCP function and
force start of MAC and IP address retrieval. Remember to reset the DHCP when the camera is no
longer connected to a LAN.
Conference [1..1] AutoAnswer Mode
Set the AutoAnswer mode.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <On/Off>
On: Enable AutoAnswer to let the system automatically answer all incoming calls.
Off: The incoming calls must be answered manually by pressing the OK key or the green Call
key on the remote control.
Value space: <On/Off>
On: Enable DHCP in the camera. The camera is automatically re-booted. After re-boot the
DHCP is started and the IP address will be retrieved. Run the commnand "xStatus Camera" for
result.
Off: Disable DHCP in the camera. NOTE: This setting should be applied when the camera is not
connected to a LAN.
Example: Conference 1 AutoAnswer Mode: Off
Conference [1..1] AutoAnswer Mute
Example: Cameras Camera 1 DHCP: Off
Determine if the microphone shall be muted when an incoming call is automatically answered.
NOTE: Requires the AutoAnswer Mode to be enabled.
Requires user role: ADMIN
Value space: <On/Off>
On: The incoming call will be muted when automatically answered.
Off: The incoming call will not be muted.
Example: Conference 1 AutoAnswer Mute: Off
Conference [1..1] AutoAnswer Delay
Define how long (in seconds) an incoming call has to wait before it is answered automatically by
the system. NOTE: Requires the AutoAnswer Mode to be enabled.
Requires user role: ADMIN
Value space: <0..50>
Range: Select a value from 0 to 50 seconds.
Example: Conference 1 AutoAnswer Delay: 0
Conference [1..1] MicUnmuteOnDisconnect Mode
Determine if the microphones shall be unmuted automatically when all calls are disconnected. In
a meeting room or other shared resources this could be done to prepare the system for the next
user.
Requires user role: ADMIN
Value space: <On/Off>
On: Un-mute the microphones after the call is disconnected.
Off: If muted, let the microphones remain muted after the call is disconnected.
Example: Conference 1 MicUnmuteOnDisconnect Mode: On
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
46
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Conference [1..1] DoNotDisturb Mode
Conference [1..1] Encryption Mode
Determine if there should be an alert on incoming calls.
Requires user role: USER
Set the conference encryption mode. A padlock with the text "Encryption On" or "Encryption Off"
displays on screen for a few seconds when the conference starts.
Value space: <On/Off/Timed>
On: All incoming calls will be rejected and they will be registered as missed calls. The calling
side will receive a busy signal. A message telling that Do Not Disturb is switched on will display
on the Touch controller or main display. The calls received while in Do Not Disturb mode will be
shown as missed calls.
Off: The incoming calls will come through as normal.
Timed: Select this option when using the API to switch Do Not Disturb mode on and off
(xCommand Conference DoNotDisturb Activate and xCommand Conference DoNotDisturb
Deactivate).
Requires user role: ADMIN
Value space: <BestEffort/On/Off>
BestEffort: The system will use encryption whenever possible.
> In Point to point calls: If the far end system supports encryption (AES-128), the call will be
encrypted. If not, the call will proceed without encryption.
> In MultiSite calls: In order to have encrypted MultiSite conferences, all sites must support
encryption. If not, the conference will be unencrypted.
On: The system will only allow calls that are encrypted.
Off: The system will not use encryption.
Example: DoNotDisturb Mode: Off
Example: Conference 1 Encryption Mode: BestEffort
Conference [1..1] FarEndControl Mode
Conference [1..1] DefaultCall Protocol
Lets you decide if the remote side (far end) should be allowed to select your video sources and
control your local camera (pan, tilt, zoom).
Set the Default Call Protocol to be used when placing calls from the system.
Requires user role: ADMIN
Value space: <H323/Sip>
H.323: Select H.323 to ensure that calls are set up as H.323 calls.
Sip: Select SIP to ensure that calls are set up as SIP calls.
Requires user role: ADMIN
Value space: <On/Off>
On: Allows the far end to be able to select your video sources and control your local camera
(pan, tilt, zoom). You will still be able to control your camera and select your video sources as
normal.
Off: The far end is not allowed to select your video sources or to control your local camera (pan,
tilt, zoom).
Example: Conference 1 DefaultCall Protocol: H323
Conference [1..1] DefaultCall Rate
Set the Default Call Rate to be used when placing calls from the system.
Example: Conference 1 FarEndControl Mode: On
Requires user role: ADMIN
Conference [1..1] FarEndControl SignalCapability
Set the far end control (H.224) signal capability mode.
Value space: <64..6000>
Range: Select a value between 64 and 6000 kbps
Requires user role: ADMIN
Example: Conference 1 DefaultCall Rate: 768
Value space: <On/Off>
On: Enable the far end control signal capability.
Off: Disable the far end control signal capability.
Conference [1..1] MaxTransmitCallRate
Example: Conference 1 FarEndControl SignalCapability: On
Requires user role: ADMIN
Specify the maximum transmit call rate to be used when placing or receiving calls.
Value space: <64..6000>
Range: Select a value between 64 and 6000 kbps.
Example: Conference 1 MaxTransmitCallRate: 6000
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
47
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Conference [1..1] MaxReceiveCallRate
Conference [1..1] PacketLossResilience Mode
Specify the maximum receive call rate to be used when placing or receiving calls.
Set the packetloss resilience mode. This configuration will only take effect for calls initiated after
the configuration is set.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <64..6000>
Range: Select a value between 64 and 6000 kbps.
Example: Conference 1 MaxReceiveCallRate: 6000
Value space: <On/Off>
On: Enable the packetloss resilience.
Off: Disable the packetloss resilience.
Conference [1..1] VideoBandwidth Mode
Example: Conference 1 PacketLossResilience Mode: On
Set the conference video bandwidth mode.
Conference [1..1] Presentation Policy
Requires user role: ADMIN
Control how the presentation service is to be performed.
Value space: <Dynamic/Static>
Dynamic: The available transmit bandwidth for the video channels are distributed among the
currently active channels. If there is no presentation, the main video channels will use the
bandwidth of the presentation channel.
Static: The available transmit bandwidth is assigned to each video channel, even if it is not
active.
Requires user role: ADMIN
Value space: <LocalRemote/LocalOnly>
LocalRemote: The presentation will be shown locally and sent to remote side.
LocalOnly: The presentation will only be shown locally.
Example: Conference 1 Presentation Policy: LocalRemote
Example: Conference 1 VideoBandwidth Mode: Dynamic
Conference [1..1] Multipoint Mode
Conference [1..1] VideoBandwidth MainChannel Weight
The available transmit video bandwidth is distributed on the main channel and presentation channel
according to "MainChannel Weight" and "PresentationChannel Weight". If the main channel
weight is 2 and the presentation channel weight is 1, then the main channel will use twice as much
bandwidth as the presentation channel.
Define how the video system handles multipoint video conferences. Basically there are two ways:
The video system can use its built-in MultiSite feature (optional), or it can rely on the MultiWay
network solution. MultiWay requires that your video network includes an external Multipoint
control unit (MCU). The MultiSite feature allows up to four participants (yourself included) plus one
additional audio call. An External MCU may let you set up conferences with many participants.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <1..10>
Range: 1 to 10.
The available transmit video bandwidth is distributed on the main channel and presentation channel
according to "MainChannel Weight" and "PresentationChannel Weight". If the main channel
weight is 2 and the presentation channel weight is 1, then the main channel will use twice as much
bandwidth as the presentation channel.
Value space: <Off/MulitSite/MultiWay/Auto>
Off: Multipoint conferences are not allowed.
MultiSite: Use MultiSite for multipoint conferences. If MultiSite is chosen when the MultiSite
feature is not available, the Multipoint Mode will be set to Off.
MultiWay: Use MultiWay for multipoint conferences. The Multipoint Mode will be set to Off
automatically if the MultiWay service is unavailable, e.g. when a server address is not specified
in the NetworkServices MultiWay Address setting.
Auto: If a MultiWay address is specified in the NetworkServices Multiway Address setting,
MultiWay takes priority over MultiSite. If neither MultiWay nor MultiSite is available, the multipoint
mode is set to Off automatically.
Requires user role: ADMIN
Example: Conference 1 Multipoint Mode: Auto
Example: Conference 1 VideoBandwidth MainChannel Weight: 5
Conference [1..1] VideoBandwidth PresentationChannel Weight
Value space: <1..10>
Range: 1 to 10.
Example: Conference 1 VideoBandwidth PresentationChannel Weight: 5
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
48
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
The FacilityService settings
Conference [1..1] IncomingMultisiteCall Mode
Select whether or not to allow incoming calls when already in a call/conference.
Requires user role: ADMIN
FacilityService Service [1..5] Type
Value space: <Allow/Deny>
Allow: You will be notified when someone calls you while you are already in a call. You can
accept the incoming call or not. The ongoing call may be put on hold while answering the
incoming call; or you may merge the calls (requires MultiSite or MultiWay support).
Deny: An incoming call will be rejected if you are already in a call. You will not be notified about
the incoming call. However, the call will appear as a missed call in the call history list.
Up to five different facility services can be supported simultaneously. With this setting you can
select what kind of services they are.
A facility service is not available unless both the FacilityService Service Name and the
FacilityService Service Number settings are properly set.
Only FacilityService Service 1 with Type Helpdesk is available on the Touch controller. Facility
services are not available when using the remote control and on-screen menu.
Example: Conference 1 IncomingMultisiteCall Mode: Allow
Requires user role: ADMIN
Value space: <Other/Concierge/Helpdesk/Emergency/Security/Catering/
Transportation>
Other: Select this option for services not covered by the other options.
Concierge: Select this option for concierge services.
Helpdesk: Select this option for helpdesk services.
Emergency: Select this option for emergency services.
Security: Select this option for security services.
Catering: Select this option for catering services.
Transportation: Select this option for transportation services.
Example: FacilityService Service 1 Type: Helpdesk
FacilityService Service [1..5] Name
Set the name of each facility service. Up to five different facility services are supported.
A facility service is not available unless both the FacilityService Service Name and the
FacilityService Service Number settings are properly set.
Only FacilityService Service 1 is available on the Touch controller, and its Name is used on the
facility service call button. Facility services are not available when using the remote control and
on-screen menu.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters.
Example: FacilityService Service 1 Name: ""
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
49
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
The GPIO settings
FacilityService Service [1..5] Number
Set the number for each facility service. Up to five different facility services are supported.
A facility service is not available unless both the FacilityService Service Name and the
FacilityService Service Number settings are properly set.
GPIO Pin [1..4] Mode
NOTE: This command is not supported on Codec C40.
Only FacilityService Service 1 is available on the Touch controller. Facility services are not available
when using the remote control and on-screen menu.
The four GPIO pins are configured individually. The state can be retrieved by "xStatus GPIO Pin
[1..4] State". The default pin state is High (+12 V). When activated as output, they are set to 0 V. To
activate them as input, they must be pulled down to 0 V.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters.
Requires user role: ADMIN
Value space: <InputNoAction/OutputManualState/OutputInCall/
OutputMicrophonesMuted/OutputPresentationOn/OutputAllCallsEncrypted/
OutputStandbyActive/InputMuteMicrophones>
InputNoAction: The pin state can be set, but no operation is performed.
OutputManualState: The pin state can be set by "xCommand GPIO ManualState Set PinX:
<High/Low>" (to +12 V or 0 V, respectively).
OutputInCall: The pin is activated when in call, deactivated when not in call.
OutputMicrophonesMuted: The pin is activated when microphones are muted, deactivated when
not muted.
OutputPresentationOn: The pin is activated when presentation is active, deactivated when
presentation is not active.
OutputAllCallsEncrypted: The pin is activated when all calls are encrypted, deactivated when
one or more calls are not encrypted.
OutputStandbyActive: The pin is activated when the system is in standby mode, deactivated
when no longer in standby.
InputMuteMicrophones: When the pin is activated (0 V), the microphones will be muted. When
deactivated (+ 12 V), the microphones are unmuted.
Example: FacilityService Service 1 Number: ""
FacilityService Service [1..5] CallType
Set the call type for each facility service. Up to five different facility services are supported.
A facility service is not available unless both the FacilityService Service Name and the
FacilityService Service Number settings are properly set.
Only FacilityService Service 1 is available on the Touch controller. Facility services are not available
when using the remote control and on-screen menu.
Requires user role: ADMIN
Value space: <Video/Audio>
Video: Select this option for video calls.
Audio: Select this option for audio calls.
Example: FacilityService Service 1 CallType: Video
Example: GPIO Pin 1 Mode: InputNoAction
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
50
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
The H323 settings
Password protection
Administrator guide
Appendices
Contact us
H323 Profile [1..1] Authentication LoginName
The system sends the Authentication Login Name and the Authentication Password to a H.323
Gatekeeper for authentication. The authentication is a one way authentication from the codec to
the H.323 Gatekeeper, i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper
indicates that no authentication is required, the system will still try to register. NOTE: Requires the
H.323 Gatekeeper Authentication Mode to be enabled.
H323 NAT Mode
The firewall traversal technology creates a secure path through the firewall barrier, and enables
proper exchange of audio/video data when connected to an external video conferencing system
(when the IP traffic goes through a NAT router). NOTE: NAT does not work in conjunction with
gatekeepers.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Requires user role: ADMIN
Value space: <Auto/On/Off>
Auto: The system will determine if the "NAT Address" or the real IP-address should be used
within signalling. This is done to make it possible to place calls to endpoints on the LAN as well
as endpoints on the WAN.
On: The system will signal the configured "NAT Address" in place of its own IP-address within
Q.931 and H.245. The NAT Server Address will be shown in the startup-menu as: "My IP
Address: 10.0.2.1".
Off: The system will signal the real IP Address.
Example: H323 Profile 1 Authentication LoginName: ""
H323 Profile [1..1] Authentication Password
The system sends the Authentication Login Name and the Authentication Password to a H.323
Gatekeeper for authentication. The authentication is a one way authentication from the codec to
the H.323 Gatekeeper, i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper
indicates that no authentication is required, the system will still try to register. NOTE: Requires the
H.323 Gatekeeper Authentication Mode to be enabled.
Example: H323 NAT Mode: Off
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
H323 NAT Address
Enter the external/global IP-address to the router with NAT support. Packets sent to the router will
then be routed to the system.
Example: H323 Profile 1 Authentication Password:
In the router, the following ports must be routed to the system's IP-address:
H323 Profile [1..1] CallSetup Mode
* Port 1720
The H.323 Call Setup Mode defines whether to use a Gatekeeper or Direct calling when
establishing H323 calls.
* Port 5555-5574
* Port 2326-2485
Requires user role: ADMIN
NOTE: Direct H.323 calls can be made even though the H.323 Call Setup Mode is set to
Gatekeeper.
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
Requires user role: ADMIN
Value space: <Direct/Gatekeeper>
Direct: An IP-address must be used when dialling in order to make the H323 call.
Gatekeeper: The system will use a Gatekeeper to make a H.323 call. When selecting this option
the H323 Profile Gatekeeper Address and H323 Profile Gatekeeper Discovery settings must
also be configured.
Example: H323 NAT Address: ""
H323 Profile [1..1] Authentication Mode
Set the authenticatin mode for the H.323 profile.
Example: H323 Profile 1 CallSetup Mode: Gatekeeper
Requires user role: ADMIN
Value space: <On/Off>
On: If the H.323 Gatekeeper Authentication Mode is set to On and a H.323 Gatekeeper
indicates that it requires authentication, the system will try to authenticate itself to the
gatekeeper. NOTE: Requires the Authentication LoginName and Authentication Password to be
defined on both the codec and the Gatekeeper.
Off: If the H.323 Gatekeeper Authentication Mode is set to Off the system will not try to
authenticate itself to a H.323 Gatekeeper, but will still try a normal registration.
Example: H323 Profile 1 Authentication Mode: Off
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
51
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
H323 Profile [1..1] Gatekeeper Discovery
H323 Profile [1..1] PortAllocation
Determine how the system shall register to a H.323 Gatekeeper.
The H.323 Port Allocation setting affects the H.245 port numbers used for H.323 call signalling.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <Manual/Auto>
Manual: The system will use a specific Gatekeeper identified by the Gatekeeper's IP-address.
Auto: The system will automatically try to register to any available Gatekeeper. If a Gatekeeper
responds to the request sent from the codec within 30 seconds this specific Gatekeeper will
be used. This requires that the Gatekeeper is in auto discovery mode as well. If no Gatekeeper
responds, the system will not use a Gatekeeper for making H.323 calls and hence an IPaddress must be specified manually.
Value space: <Dynamic/Static>
Dynamic: The system will allocate which ports to use when opening a TCP connection. The
reason for doing this is to avoid using the same ports for subsequent calls, as some firewalls
consider this as a sign of attack. When Dynamic is selected, the H.323 ports used are from
11000 to 20999. Once 20999 is reached they restart again at 11000. For RTP and RTCP
media data, the system is using UDP ports in the range 2326 to 2487. Each media channel
is using two adjacent ports, ie 2330 and 2331 for RTP and RTCP respectively. The ports are
automatically selected by the system within the given range. Firewall administrators should not
try to deduce which ports are used when, as the allocation schema within the mentioned range
may change without any further notice.
Static: When set to Static the ports are given within a static predefined range [5555-6555].
Example: H323 Profile 1 Gatekeeper Discovery: Manual
H323 Profile [1..1] Gatekeeper Address
Enter the IP address of the Gatekeeper. NOTE: Requires the H.323 Call Setup Mode to be set to
Gatekeeper and the Gatekeeper Discovery to be set to Manual.
Example: H323 Profile 1 PortAllocation: Dynamic
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: Only the valid IP address format is accepted. An IP address that contains letters
(192.a.2.0) or unvalid IP addresses (192.0.1234.0) will be rejected.
Example: H323 Profile 1 Gatekeeper Address: "192.0.2.0"
H323 Profile [1..1] H323Alias E164
The H.323 Alias E.164 defines the address of the system, according to the numbering plan
implemented in the H.323 Gatekeeper. The E.164 alias is equivalent to a telephone number,
sometimes combined with access codes.
Requires user role: ADMIN
Value space: <S: 0, 30>
Format: Compact string with a maximum of 30 characters. Valid characters are 0-9, * and #.
Example: H323 Profile 1 H323Alias E164: "90550092"
H323 Profile [1..1] H323Alias ID
Lets you specify the H.323 Alias ID which is used to address the system on a H.323 Gatekeeper
and will be displayed in the call lists. Example: "firstname.surname@company.com", "My H.323
Alias ID"
Requires user role: ADMIN
Value space: <S: 0, 49>
Format: String with a maximum of 49 characters
Example: H323 Profile 1 H323Alias ID: "firstname.surname@company.com"
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
52
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
The Network settings
Network [1..1] IPv4 Address
Network [1..1] Assignment
Requires user role: ADMIN
Administrator guide
Appendices
Contact us
Enter the static IPv4 network address for the system. Only applicable if the Network Assignment is
set to Static.
Define whether to use DHCP or Static IPv4 assignment.
Value space: <S: 0, 64>
Format: Only the valid IP address format is accepted. An IP address that contains letters
(192.a.2.0) or unvalid IP addresses (192.0.1234.0) will be rejected.
Requires user role: ADMIN
Value space: <Static/DHCP>
Static: Set the network assignment to Static and configure the static IPv4 settings (IP Address,
SubnetMask and Gateway).
DHCP: The system addresses are automatically assigned by the DHCP server.
Example: Network 1 IPv4 Address: "192.0.2.0"
Network [1..1] IPv4 Gateway
Example: Network 1 Assignment: DHCP
Define the IPv4 network gateway. Only applicable if the Network Assignment is set to Static.
Requires user role: ADMIN
Network [1..1] DNS Domain Name
Value space: <S: 0, 64>
Format: Compact string with a maximum of 64 characters.
DNS Domain Name is the default domain name suffix which is added to unqualified names.
Example: If the DNS Domain Name is "company.com" and the name to lookup is
"MyVideoSystem", this will result in the DNS lookup "MyVideoSystem.company.com".
Example: Network 1 IPv4 Gateway: "192.0.2.0"
Requires user role: ADMIN
Network [1..1] IPv4 SubnetMask
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
Define the IPv4 network subnet mask. Only applicable if the Network Assignment is set to Static.
Requires user role: ADMIN
Example: Network 1 DNS Domain Name: ""
Value space: <S: 0, 64>
Format: Compact string with a maximum of 64 characters.
Network [1..1] DNS Server [1..5] Address
Example: Network 1 IPv4 SubnetMask: "255.255.255.0"
Define the network addresses for DNS servers. Up to 5 addresses may be specified. If the network
addresses are unknown, contact your administrator or Internet Service Provider.
Network [1..1] IPv6 Address
Requires user role: ADMIN
Enter the static IPv6 network address for the system. Only applicable if the Network IPv6
Assignment is set to Static.
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
Requires user role: ADMIN
Example: Network 1 DNS Server 1 Address: ""
Value space: <S: 0, 64>
Format: The IPv6 address of host name.
Network [1..1] IPStack
Example: Network 1 IPv6 Address: "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff"
Select which internet protocols the system will support.
Requires user role: ADMIN
Network [1..1] IPv6 Gateway
Value space: <IPv4/IPv6>
IPv4: IP version 4 is supported.
IPv6: IP version 6 is supported. The IPv4 settings (IP Address, IP Subnet Mask and Gateway)
will be disabled.
Define the IPv6 network gateway address. Only applicable if the Network IPv6 Assignment is set to
Static.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: The IPv6 address of host name.
Example: Network 1 IPStack: IPv4
Example: Network 1 IPv6 Gateway: "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff"
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
53
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Network [1..1] IPv6 Assignment
Network [1..1] QoS Diffserv Data
Define whether to use Autoconf or Static IPv6 assignment.
The Diffserv Data defines which priority Data packets should have in an IP network. Enter a priority,
which ranges from 0 to 63 for the packets. The higher the number, the higher the priority. These
priorities might be overridden when packets are leaving the network controlled by the local network
administrator. NOTE: Requires the Network QoS Mode to be set to Diffserv.
Requires user role: ADMIN
Value space: <Static/Autoconf>
Static: Set the network assignment to Static and configure the static IPv6 settings (IP Address
and Gateway).
Autoconf: Enable IPv6 stateless autoconfiguration of the IPv6 network interface. See RFC4862
for a detailed description.
Requires user role: ADMIN
Value space: <0..63>
Data: A recommended value is Diffserv Code Point (DSCP) AF23, which equals the value 22. If
in doubt, contact your network administrator.
Range: Select a value from 0 to 63.
Example: Network 1 IPv6 Assignment: Autoconf
Example: Network 1 QoS Diffserv Data: 0
Network [1..1] IPv6 DHCPOptions
Retrieves a set of DHCP options from a DHCPv6 server.
Network [1..1] QoS Diffserv Signalling
Requires user role: ADMIN
The Diffserv Signalling defines which priority Signalling packets should have in an IP network. Enter
a priority, which ranges from 0 to 63 for the packets. The higher the number, the higher the priority.
These priorities might be overridden when packets are leaving the network controlled by the local
network administrator. NOTE: Requires the Network QoS Mode to be set to Diffserv.
Value space: <On/Off>
On: Enable the retrieval of a selected set of DHCP options from a DHCPv6 server.
Off: Set to Off when IPv6 Assignment is set to Static.
Example: Network 1 IPv6 Gateway: On
Requires user role: ADMIN
Value space: <0..63>
Signalling: A recommended value is Diffserv Code Point (DSCP) AF31, which equals the value
26. If in doubt, contact your network administrator.
Range: Select a value from 0 to 63.
Network [1..1] QoS Mode
The QoS (Quality of Service) is a method which handles the priority of audio, video and data in
the network. The QoS settings must be supported by the infrastructure. Diffserv (Differentiated
Services) is a computer networking architecture that specifies a simple, scalable and coarsegrained mechanism for classifying, managing network traffic and providing QoS priorities on
modern IP networks.
Example: Network 1 QoS Diffserv Signalling: 0
Network [1..1] QoS Diffserv Video
Requires user role: ADMIN
The Diffserv Video defines which priority Video packets should have in an IP network. Enter a
priority, which ranges from 0 to 63 for the packets. The higher the number, the higher the priority.
These priorities might be overridden when packets are leaving the network controlled by the local
network administrator. NOTE: Requires the Network QoS Mode to be set to Diffserv.
Value space: <Off/Diffserv>
Off: No QoS method is used.
Diffserv: When you set the QoS Mode to Diffserv you must configure the Diffserv sub menu
settings (Audio, Data, Signalling and Video).
Requires user role: ADMIN
Example: Network 1 QoS Mode: diffserv
Value space: <0..63>
Video: A recommended value is Diffserv Code Point (DSCP) AF41, which equals the value 34. If
in doubt, contact your network administrator.
Range: Select a value from 0 to 63.
Network [1..1] QoS Diffserv Audio
The Diffserv Audio defines which priority Audio packets should have in an IP network. Enter a
priority, which ranges from 0 to 63 for the packets. The higher the number, the higher the priority.
These priorities might be overridden when packets are leaving the network controlled by the local
network administrator. NOTE: Requires the Network QoS Mode to be set to Diffserv.
Example: Network 1 QoS Diffserv Video: 0
Requires user role: ADMIN
Value space: <0..63>
Audio: A recommended value is Diffserv Code Point (DSCP) AF41, which equals the value 34. If
in doubt, contact your network administrator.
Range: Select a value from 0 to 63.
Example: Network 1 QoS Diffserv Audio: 0
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
54
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Network [1..1] IEEE8021X Mode
Network [1..1] IEEE8021X Password
The system can be connected to an IEEE 802.1X LAN network, with a port-based network access
control that is used to provide authenticated network access for Ethernet networks.
The 802.1X Password is the password needed for 802.1X authentication.
Requires user role: ADMIN
Value space: <S: 0, 32>
Format: String with a maximum of 32 characters.
Contact us
Requires user role: ADMIN
Value space: <On/Off>
On: The 802.1X authentication is enabled.
Off: The 802.1X authentication is disabled (default).
Example: Network 1 IEEE8021X Password: "***"
Example: Network 1 IEEE8021X Mode: Off
Network [1..1] IEEE8021X AnonymousIdentity
Network [1..1] IEEE8021X TlsVerify
The 802.1X Anonymous ID string is to be used as unencrypted identity with EAP (Extensible
Authentication Protocol) types that support different tunneled identity, like EAP-PEAP and EAPTTLS. If set, the anonymous ID will be used for the initial (unencrypted) EAP Identity Request.
Verification of the server-side certificate of an IEEE802.1x connection against the certificates in the
local CA-list when TLS is used. The CA-list must be uploaded to the video system / codec.
Requires user role: ADMIN
This setting takes effect only when Network [1..1] IEEE8021X Eap Tls is enabled (On).
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
Requires user role: ADMIN
Value space: <Off/On>
Off: When set to Off, TLS connections are allowed without verifying the server-side X.509
certificate against the local CA-list. This should typically be selected if no CA-list has been
uploaded to the codec.
On: When set to On, the server-side X.509 certificate will be validated against the local CA-list
for all TLS connections. Only servers with a valid certificate will be allowed.
Example: Network 1 IEEE8021X AnonymousIdentity: ""
Network [1..1] IEEE8021X Eap Md5
Set the Md5 (Message-Digest Algorithm 5) mode. This is a Challenge Handshake Authentication
Protocol that relies on a shared secret. Md5 is a Weak security.
Requires user role: ADMIN
Example: xConfiguration Network 1 IEEE8021X TlsVerify: Off
Value space: <On/Off>
On: The EAP-MD5 protocol is enabled (default).
Off: The EAP-MD5 protocol is disabled.
Network [1..1] IEEE8021X UseClientCertificate
Authentication using a private key/certificate pair during an IEEE802.1x connection. The
authentication X.509 certificate must be uploaded to the video system / codec.
Example: Network 1 IEEE8021X Eap Md5: On
Requires user role: ADMIN
Network [1..1] IEEE8021X Eap Ttls
Value space: <Off/On>
Off: When set to Off client-side authentication is not used (only server-side).
On: When set to On the client (codec) will perform a mutual authentication TLS handshake with
the server.
Set the TTLS (Tunneled Transport Layer Security) mode. Authenticates LAN clients without the
need for client certificates. Developed by Funk Software and Certicom. Usually supported by Agere
Systems, Proxim and Avaya.
Requires user role: ADMIN
Example: Network 1 IEEE8021X UseClientCertificate: Off
Value space: <On/Off>
On: The EAP-TTLS protocol is enabled (default).
Off: The EAP-TTLS protocol is disabled.
Network [1..1] IEEE8021X Identity
The 802.1X Identity is the user name needed for 802.1X authentication.
Example: Network 1 IEEE8021X Eap Ttls: On
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
Example: Network 1 IEEE8021X Identity: ""
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
55
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Network [1..1] IEEE8021X Eap Tls
Network [1..1] TrafficControl Mode
Enable or disable the use of EAP-TLS (Transport Layer Security) for IEEE802.1x connections. The
EAP-TLS protocol, defined in RFC5216, is considered one of the most secure EAP standards. LAN
clients are authenticated using client certificates.
Set the network traffic control mode to decide how to control the video packets transmission
speed.
Requires user role: ADMIN
Value space: <Off/On>
Off: The EAP-TLS protocol is disabled.
On: The EAP-TLS protocol is enabled (default).
Value space: <On/Off>
On: Transmit video packets at maximum 20 Mbps. Can be used to smooth out bursts in the
outgoing network traffic.
Off: Transmit video packets at link speed.
Example: Network 1 IEEE8021X Eap Tls: On
Example: Network 1 TrafficControl: On
Network [1..1] IEEE8021X Eap Peap
Network [1..1] RemoteAccess Allow
Set the Peap (Protected Extensible Authentication Protocol) mode. Authenticates LAN clients
without the need for client certificates. Developed by Microsoft, Cisco and RSA Security.
Filter IP addresses for access to ssh/telnet/HTTP/HTTPS.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters, comma separated IP adresses or IP range.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <On/Off>
On: The EAP-PEAP protocol is enabled (default).
Off: The EAP-PEAP protocol is disabled.
Example: Network 1 RemoteAccess Allow: "192.168.1.231, 192.168.1.182"
Example: Network 1 IEEE8021X Eap Peap: On
Network [1..1] VLAN Voice Mode
Set the VLAN voice mode.
Network [1..1] MTU
Requires user role: ADMIN
Set the Ethernet MTU (Maximum Transmission Unit).
Value space: <Auto/Manual/Off>
Auto: The Cisco Discovery Protocol (CDP), if available, assigns an id to the voice VLAN. If CDP
is not available, VLAN is not enabled. The VLAN Voice Mode automatically will be set to Auto
when the GUI is used to set the Provisioning Mode to CUCM.
Manual: The VLAN id is set manually using the Network VLAN Voice VlanId setting. If CDP is
available, the manually set value will be overruled by the value assigned by CDP.
Off: VLAN is not enabled.
Requires user role: ADMIN
Value space: <576..1500>
Range: Select a value from 576 to 1500 bytes.
Example: Network 1 MTU: 1500
Network [1..1] Speed
Example: Network 1 VLAN Voice Mode: Off
Set the Ethernet link speed.
Requires user role: ADMIN
Network [1..1] VLAN Voice VlanId
Value space: <Auto/10half/10full/100half/100full/1000full>
Auto: Autonegotiate link speed.
10half: Force link to 10 Mbps half-duplex.
10full: Force link to 10 Mbps full-duplex.
100half: Force link to 100 Mbps half-duplex.
100full: Force link to 100 Mbps full-duplex.
1000full: Force link to 1 Gbps full-duplex.
Set the VLAN voice ID. This setting will only take effect if VLAN Voice Mode is set to Manual.
Requires user role: ADMIN
Value space: <1..4094>
Range: Select a value from 1 to 4094.
Example: Network 1 VLAN Voice VlanId: 1
Example: Network 1 Speed: Auto
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
56
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
The NetworkPort settings
The NetworkServices settings
NetworkPort [2] Mode
NetworkServices MultiWay Address
Define if the network port 2 shall be enabled for direct pairing with the Cisco TelePresence Touch
for C Series.
The Multiway address must be equal to the Conference Factory Alias, as configured on the Video
Communication Server. The Multiway™ conferencing enables video endpoint users to introduce a
3rd party into an existing call.
Requires user role: ADMIN
Multiway™ can be used in the following situations:
Value space: <Inactive/DirectPairing>
Inactive: Set the NetworkPort 2 to Inactive when no device is connected.
DirectPairing: Set the NetworkPort 2 to DirectPairing when you have a Cisco TelePresence
Touch unit connected to the port. This will enable for direct pairing between the touch unit and
the codec.
1) When you want to add someone else in to your existing call.
2) When you are called by a 3rd party while already in a call and you want to include that person
in the call.
Requirements: The Codec C20 must be running TC3.0 (or later), Codec C90/C60/C40 must be
running TC4.0 (or later), EX90/EX60/MX200 must be running TC4.2 (or later), MX300 must be
running TC5.0 (or later),Video Communication Server (VCS) version X5 (or later) and Codian MCU
version 3.1 (or later). Endpoints invited to join the Multiway™ conference must support the H.323
routeToMC facility message if in an H.323 call, or SIP REFER message if in a SIP call.
Example: NetworkPort 2 Mode: Inactive
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters.
Example: NetworkServices MultiWay Address: "h323:multiway@company.com"
NetworkServices MultiWay Protocol
Determine the protocol to be used for Multiway calls. NOTE: Requires a restart of the codec.
Requires user role: ADMIN
Value space: <Auto/H323/Sip>
Auto: The system will select the protocol for Multiway calls.
H323: The H323 protocol will be used for Multiway calls.
Sip: The SIP protocol will be used for Multiway calls.
Example: NetworkServices MultiWay Protocol: Auto
NetworkServices H323 Mode
Determine whether the system should be able to place and receive H.323 calls or not. NOTE:
Requires a restart of the codec.
Requires user role: ADMIN
Value space: <On/Off>
On: Enable the possibility to place and receive H.323 calls (default).
Off: Disable the possibility to place and receive H.323 calls.
Example: NetworkServices H323 Mode: On
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
57
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
NetworkServices HTTP Mode
NetworkServices HTTPS OCSP Mode
Set the HTTP mode to enable/disable access to the system through a web browser. The web
interface is used for system management, call management such as call transfer, diagnostics and
software uploads.
Define the support for OCSP (Online Certificate Status Protocol) responder services. The OCSP
feature allows users to enable OCSP instead of certificate revocation lists (CRLs) to check
certificate status.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <On/Off>
On: The HTTP protocol is enabled.
Off: The HTTP protocol is disabled.
Value space: <Off/On>
Off: Disable OCSP support.
On: Enable OCSP support.
Example: NetworkServices HTTP Mode: On
Example: NetworkServices HTTPS OCSP Mode: Off
NetworkServices HTTPS Mode
NetworkServices HTTPS OCSP URL
HTTPS is a web protocol that encrypts and decrypts user page requests as well as the pages that
are returned by the web server.
Specify the URL of an OCSP server.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters.
Requires user role: ADMIN
Value space: <On/Off>
On: The HTTPS protocol is enabled.
Off: The HTTPS protocol is disabled.
Example: NetworkServices HTTPS OCSP URL: "http://ocspserver.company.com:81"
Example: NetworkServices HTTPS Mode: On
NetworkServices NTP Mode
The Network Time Protocol (NTP) is used to synchronize the time of the system to a reference
time server. The time server will subsequently be queried every 24th hour for time updates.
The time will be displayed on the top of the screen. The system will use the time to timestamp
messages transmitted to Gatekeepers or Border Controllers requiring H.235 authentication. The
system will use the time to timestamp messages transmitted to Gatekeepers or Border Controllers
that requires H.235 authentication. It is also used for timestamping Placed Calls, Missed Calls and
Received Calls.
NetworkServices HTTPS VerifyServerCertificate
When the system connects to an external HTTPS server (like a phonebook server or an external
manager), this server will present a certificate to the system to identify itself.
Requires user role: ADMIN
Value space: <On/Off>
On: Requires the system to verify that the server certificate is signed by a trusted Certificate
Authority (CA). This requires that a list of trusted CAs are uploaded to the system in advance.
Off: Do not verify server certificates.
Requires user role: ADMIN
When the system connects to a HTTPS client (like a web browser), the client can be asked to
present a certificate to the system to identify itself.
Value space: <Off/Auto/Manual>
Off: The system will not use an NTP server.
Auto: The system will use the NTP server, by which address is supplied from the DHCP server in
the network. If no DHCP server is used, or the DHCP server does not provide the system with a
NTP server address, the system will use the static defined NTP server address specified by the
user.
Manual: The system will always use the static defined NTP server address specified by the user.
Requires user role: ADMIN
Example: NetworkServices NTP Mode: Manual
Example: NetworkServices HTTPS VerifyServerCertificate: Off
NetworkServices HTTPS VerifyClientCertificate
Value space: <On/Off>
On: Requires the client to present a certificate that is signed by a trusted Certificate Authority
(CA). This requires that a list of trusted CAs are uploaded to the system in advance.
Off: Do not verify client certificates.
NetworkServices NTP Address
Enter the NTP Address to define the network time protocol server address. This address will be
used if NTP Mode is set to Manual, or if set to Auto and no address is supplied by a DHCP server.
Example: NetworkServices HTTPS VerifyClientCertificate: Off
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
Example: NetworkServices NTP Address: "1.ntp.tandberg.com"
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
58
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
NetworkServices SIP Mode
NetworkServices SNMP SystemContact
Determine whether the system should be able to place and receive SIP calls or not. NOTE:
Requires a restart of the codec.
Enter the name of the Network Services SNMP System Contact.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Contact us
Requires user role: ADMIN
Value space: <On/Off>
On: Enable the possibility to place and receive SIP calls (default).
Off: Disable the possibility to place and receive SIP calls.
Example: NetworkServices SNMP SystemContact: ""
Example: NetworkServices SIP Mode: On
NetworkServices SNMP SystemLocation
Enter the name of the Network Services SNMP System Location.
NetworkServices SNMP Mode
Requires user role: ADMIN
SNMP (Simple Network Management Protocol) is used in network management systems to monitor
network-attached devices (routers, servers, switches, projectors, etc) for conditions that warrant
administrative attention. SNMP exposes management data in the form of variables on the managed
systems, which describe the system configuration. These variables can then be queried (set to
ReadOnly) and sometimes set (set to ReadWrite) by managing applications.
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example: NetworkServices SNMP SystemLocation: ""
Requires user role: ADMIN
NetworkServices SSH Mode
Value space: <Off/ReadOnly/ReadWrite>
Off: Disable the SNMP network service.
ReadOnly: Enable the SNMP network service for queries only.
ReadWrite: Enable the SNMP network service for both queries and commands.
SSH (or Secure Shell) protocol can provide secure encrypted communication between the codec
and your local computer.
Requires user role: ADMIN
Example: NetworkServices SNMP Mode: ReadWrite
Value space: <On/Off>
On: The SSH protocol is enabled.
Off: The SSH protocol is disabled.
NetworkServices SNMP Host [1..3] Address
Example: NetworkServices SSH Mode: On
Enter the address of up to three SNMP Managers.
The system's SNMP Agent (in the codec) responds to requests from SNMP Managers (a PC
program etc.), e.g. about system location and system contact. SNMP traps are not supported.
NetworkServices SSH AllowPublicKey
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
Value space: <On/Off>
On: The SSH public key is allowed.
Off: The SSH public key is not allowed.
Secure Shell (SSH) public key authentication can be used to access the codec.
Example: NetworkServices SNMP Host 1 Address: ""
Example: NetworkServices SSH AllowPublicKey: On
NetworkServices SNMP CommunityName
NetworkServices Telnet Mode
Enter the name of the Network Services SNMP Community. SNMP Community names are used
to authenticate SNMP requests. SNMP requests must have a password (case sensitive) in order
to receive a response from the SNMP Agent in the codec. The default password is "public". If
you have the Cisco TelePresence Management Suite (TMS) you must make sure the same SNMP
Community is configured there too. NOTE: The SNMP Community password is case sensitive.
Telnet is a network protocol used on the Internet or Local Area Network (LAN) connections.
Requires user role: ADMIN
Value space: <On/Off>
On: The Telnet protocol is enabled.
Off: The Telnet protocol is disabled. This is the factory setting.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example: NetworkServices Telnet Mode: Off
Example: NetworkServices SNMP CommunityName: "public"
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
59
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
The Phonebook settings
The Provisioning settings
Phonebook Server [1..1] ID
Provisioning Connectivity
Enter a name for the external phonebook.
This setting controls how the device discovers whether it should request an internal or external
configuration from the provisioning server.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
Select the phonebook server type.
Value space: <Internal/External/Auto>
Internal: Request internal configuration.
External: Request external configuration.
Auto: Automatically discover using NAPTR queries whether internal or external configurations
should be requested. If the NAPTR responses have the "e" flag, external configurations will be
requested. Otherwise internal configurations will be requested.
Requires user role: ADMIN
Example: Provisioning Connectivity: Auto
Example: Phonebook Server 1 ID: ""
Phonebook Server [1..1] Type
Value space: <VCS/TMS/Callway/CUCM>
VCS: Select VCS if the phonebook is located on the Cisco TelePresence Video Communication
Server.
TMS: Select TMS if the phonebook is located on the Cisco TelePresence Management Suite
server.
Callway: Select Callway if the phonebook is to be provided by the Callway subscription service.
Contact your Callway provider for more information.
CUCM: Select CUCM if the phonebook is located on the Cisco Unified Communications
Manager.
Provisioning Mode
It is possible to configure the codec (video system) using a provisioning system / an external
manager. This allows video conferencing network administrators to manage many video systems
simultaneously.
With this setting you choose which type of provisioning system to use. Provisioning can also be
switched off. Contact your provisioning system provider/representative for more information.
Requires user role: ADMIN
Value space: <Off/TMS/VCS/CallWay/CUCM/Auto>
Off: The video system will not be configured by a provisioning system.
TMS: The video system will be configured using TMS (Cisco TelePresence Management
System).
VCS: The video system will be configured using VCS (Cisco TelePresence Video
Communication Server).
Callway: The video system will be configured using Callway (subscription service).
CUCM: The video system will be configured using CUCM (Cisco Unified Communications
Manager).
Auto: The provisioning server will automatically be selected by the video system.
Example: Phonebook Server 1 Type: TMS
Phonebook Server [1..1] URL
Enter the address (URL) to the external phonebook server.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters.
Example: Phonebook Server 1 URL: "http://tms.company.com/tms/public/
external/phonebook/phonebookservice.asmx"
Example: Provisioning Mode: TMS
Provisioning LoginName
This is the user name part of the credentials used to authenticate the video system with the
provisioning server. This setting must be used when required by the provisioning server. If
Provisioning Mode is Callway, enter the video number.
Requires user role: ADMIN
Value space: <S: 0, 80>
Format: String with a maximum of 80 characters.
Example: Provisioning LoginName: ""
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
60
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Provisioning Password
Provisioning ExternalManager Path
This is the password part of the credentials used to authenticate the video system with the
provisioning server. This setting must be used when required by the provisioning server. If
Provisioning Mode is Callway, enter the activation code.
Set the Path to the external manager / provisioning system. This setting is required when several
management services reside on the same server, i.e. share the same External Manager address.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
Example: Provisioning Password: ""
Example: Provisioning ExternalManager Path: "tms/public/external/
management/SystemManagementService.asmx"
Provisioning HttpMethod
Provisioning ExternalManager Domain
Select the HTTP method to be used for the provisioning.
Enter the SIP domain for the VCS provisioning server.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <GET/POST>
GET: Select GET when the provisiong server supports GET.
POST: Select POST when the provisiong server supports POST.
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
Example: Provisioning ExternalManager Domain: "any.domain.com"
Example: Provisioning HttpMethod: POST
Provisioning ExternalManager Address
Enter the IP Address or DNS name of the external manager / provisioning system.
If an External Manager Address (and Path) is configured, the system will send a message to this
address when starting up. When receiving this message the external manager / provisioning
system can return configurations/commands to the unit as a result.
When using CUCM or TMS provisioning, the DHCP server can be set up to provide the external
manager address automatically (DHCP Option 242 for TMS, and DHCP Option 150 for CUCM). An
address set in the Provisioning ExternalManager Address setting will override the address provided
by DHCP.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: A valid IP address format or DNS name; a compact string with a maximum of 64
characters.
Example: Provisioning ExternalManager Address: ""
Provisioning ExternalManager Protocol
Determine whether to use secure management or not.
Requires user role: ADMIN
Value space: <HTTP/HTTPS>
HTTP: Set to HTTP to disable secure management. Requires HTTP to be enabled in the
xConfiguration NetworkServices HTTP Mode setting.
HTTPS: Set to HTTPS to enable secure management. Requires HTTPS to be enabled in the
xConfiguration NetworkServices HTTPS Mode setting.
Example: Provisioning ExternalManager Protocol: HTTP
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
61
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
The RTP settings
The Security settings
RTP Ports Range Start
Security Audit Server Address
Specify the first port in the range of RTP ports. See also the "H323 Profile [1..1] PortAllocation"
command.
Enter the external/global IP-address to the audit syslog server. IPv6 is not supported.
Requires user role: USER
Requires user role: AUDIT
NOTE: Requires a restart of the system for any change to take effect.
Value space: <1024..65502>
Range: Select a value from 1024 to 65502.
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
Example: RTP Ports Range Start: 2326
Example: Security Audit Server Address: ""
RTP Ports Range Stop
Security Audit Server Port
Specify the last RTP port in the range. See also the "H323 Profile [1..1] PortAllocation" command.
Enter the port of the syslog server that the system shall send its audit logs to. The default port is
514.
Requires user role: USER
Value space: <1056..65535>
Range: Select a value from 1056 to 65535.
NOTE: Requires a restart of the system for any change to take effect.
Example: RTP Ports Range Stop: 2486
Value space: <0..65535>
Range: Select a value from 0 to 65535.
Requires user role: AUDIT
Example: Security Audit Server Port: 514
Security Audit OnError Action
Describes what actions will be taken if connection to the syslog server is lost. This setting is only
relevant if Security Audit Logging Mode is set to ExternalSecure.
NOTE: Requires a restart of the system for any change to take effect.
Requires user role: AUDIT
Value space: <Halt/Ignore>
Halt: If a halt condition is detected the unit is rebooted and only the auditor is allowed to operate
the unit until the halt condition has passed. When the halt condition has passed the audit logs
are re-spooled to the external server. Halt conditions are: A network breach (no physical link),
no external syslog server running (or wrong server address or port), TLS authentication failed (if
in use), local backup (re-spooling) log full.
Ignore: The system will continue its normal operation, and rotate internal logs when full. When
connection is restored it will again send its audit logs to the syslog server.
Example: Security Audit OnError Action: Ignore
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
62
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
The SerialPort settings
Security Audit Logging Mode
Describes where the audit logs are recorded or transmitted.
NOTE: Requires a restart of the system for any change to take effect.
SerialPort Mode
Requires user role: AUDIT
Set the COM 1 serial port to be enabled/disabled.
Value space: <Off/Internal/External/ExternalSecure>
Off: No audit logging is performed.
Internal: The system records the audit logs to internal logs, and rotates logs when they are full.
External: The system sends the audit logs to an external audit syslog server. The external server
must support TCP.
ExternalSecure: The system sends encrypted audit logs to an external audit server that is
verified by a certificate in the Audit CA list. The Audit CA list file must be uploaded to the codec
using the web interface. The common_name parameter of a certificate in the CA list must
match the IP address of the syslog server.
Requires user role: ADMIN
Value space: <On/Off>
On: Enable the COM 1 serial port.
Off: Disable the COM 1 serial port.
Example: SerialPort Mode: On
SerialPort BaudRate
Example: Security Audit Logging Mode: Off
Specify the baud rate (data transmission rate, bits per second) for the COM 1 port. The default
value is 38400.
Security Session ShowLastLogon
Connection parameters for the COM port: Data bits: 8; Parity: None; Stop bits: 1; Flow control:
None.
When logging in to the system using SSH or Telnet you will see the UserId, time and date of the
last session that did a successful login.
Requires user role: ADMIN
Value space: <9600/19200/38400/57600/115200>
Range: Select a baud rate from the baud rates listed (bps).
Requires user role: ADMIN
Value space: <Off/On>
On: Set to On to enable the possibility to show information about the last session.
Off: Set to Off to disable the possibility to show information about the last session.
Example: SerialPort BaudRate: 38400
SerialPort LoginRequired
Example: Security Session ShowLastLogon: Off
Determine if login shall be required when connecting to the COM 1 port.
Requires user role: ADMIN
Security Session InactivityTimeout
Value space: <On/Off>
On: Login is required when connecting to the codec through COM 1 port.
Off: The user can access the codec through COM 1 port without any login.
Determines how long the system will accept inactivity from the user before he is automatically
logged out.
Requires user role: ADMIN
Example: SerialPort LoginRequired: On
Value space: <0..10000>
Range: Select a value from 0 to 10000 seconds. 0 means that inactivity will not enforce
automatically logout.
Example: Security Session InactivityTimeout: 0
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
63
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
The SIP settings
Password protection
Administrator guide
Appendices
Contact us
SIP Profile [1..1] DefaultTransport
Select the transport protocol to be used over the LAN.
Requires user role: ADMIN
SIP Profile [1..1] URI
Value space: <UDP/TCP/Tls/Auto>
UDP: The system will always use UDP as the default transport method.
TCP: The system will always use TCP as the default transport method.
Tls: The system will always use TLS as the default transport method. For TLS connections a SIP
CA-list can be uploaded to the video system. If no such CA-list is available on the system then
anonymous Diffie Hellman will be used.
Auto: The system will try to connect using transport protocols in the following order: TLS, TCP,
UDP.
The SIP URI or number is used to address the system. This is the URI that is registered and used
by the SIP services to route inbound calls to the system. A Uniform Resource Identifier (URI) is a
compact string of characters used to identify or name a resource.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: Compact string with a maximum of 255 characters.
Example: SIP Profile 1 URI: "sip:firstname.lastname@company.com"
Example: SIP Profile 1 DefaultTransport: Auto
SIP Profile [1..1] DisplayName
SIP Profile [1..1] TlsVerify
When configured the incoming call will report the DisplayName instead of the SIP URI.
For TLS connections a SIP CA-list can be uploaded to the video system.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters.
This is the user name part of the credentials used to authenticate towards the SIP proxy.
Value space: <On/Off>
On: Set to On to verify TLS connections. Only TLS connections to servers, whose x.509
certificate is validated against the CA-list, will be allowed.
Off: Set to Off to allow TLS connections without verifying them. The TLS connections are
allowed to be set up without verifying the x.509 certificate received from the server against the
local CA-list. This should typically be selected if no SIP CA-list has been uploaded.
Requires user role: ADMIN
Example: SIP Profile 1 TlsVerify: Off
Value space: <S: 0, 128>
Format: String with a maximum of 128 characters.
SIP Profile [1..1] Outbound
Example: SIP Profile 1 DisplayName: ""
SIP Profile [1..1] Authentication [1..1] LoginName
Example: SIP Profile 1 Authentication 1 LoginName: ""
The client initiated connections mechanism for firewall traversal, connection reuse and redundancy.
The current version supports http://tools.ietf.org/html/draft-ietf-sip-outbound-20.
SIP Profile [1..1] Authentication [1..1] Password
Requires user role: ADMIN
This is the password part of the credentials used to authenticate towards the SIP proxy.
Value space: <On/Off>
On: Set up multiple outbound connections to servers in the Proxy Address list.
Off: Connect to the single proxy configured first in Proxy Address list.
Requires user role: ADMIN
Value space: <S: 0, 128>
Format: String with a maximum of 128 characters.
Example: SIP Profile 1 Outbound: Off
Example: SIP Profile 1 Authentication 1 Password:
SIP Profile [1..1] Proxy [1..4] Address
The Proxy Address is the manually configured address for the outbound proxy. It is possible to
use a fully qualified domain name, or an IP address. The default port is 5060 for TCP and UDP but
another one can be provided. If Outbound is enabled, multiple proxies can be addressed.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: Compact string with a maximum of 255 characters. An IP address that contains letters
(192.a.2.0) or unvalid IP addresses (192.0.1234.0) will be rejected.
Example: SIP Profile 1 Proxy 1 Address: ""
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
64
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
The Standby settings
SIP Profile [1..1] Proxy [1..4] Discovery
Select if the SIP Proxy address is to be obtained manually or by using Dynamic Host Configuration
Protocol (DHCP).
Standby Control
Requires user role: ADMIN
Determine whether the system should go into standby mode or not.
Value space: <Auto/Manual>
Auto: When Auto is selected, the SIP Proxy address is obtained using Dynamic Host
Configuration Protocol (DHCP).
Manual: When Manual is selected, the manually configured SIP Proxy address will be used.
Requires user role: ADMIN
Value space: <On/Off>
On: Enter standby mode when the Standby Delay has timed out. NOTE: Requires the Standby
Delay to be set to an appropriate value.
Off: The system will not enter standby mode.
Example: SIP Profile 1 Proxy 1 Discovery: Manual
Example: Standby Control: On
SIP Profile [1..1] Type
Enables SIP extensions and special behaviour for a vendor or provider.
Standby Delay
Requires user role: ADMIN
Define how long (in minutes) the system shall be in idle mode before it goes into standby mode.
NOTE: Requires the Standby Control to be enabled.
Value space: <Standard/Alcatel/Avaya/Cisco/Microsoft/Nortel>
Standard: To be used when registering to standard SIP Proxy (tested with Cisco TelePresence
VCS and Broadsoft)
Alcatel: To be used when registering to Alcatel-Lucent OmniPCX Enterprise. NOTE: This mode
is not fully supported.
Avaya: To be used when registering to Avaya Communication Manager. NOTE: This mode is not
fully supported.
Cisco: To be used when registering to Cisco Unified Communication Manager.
Microsoft: To be used when registering to Microsoft LCS or OCS. NOTE: This mode is not fully
supported.
Nortel: To be used when registering to Nortel MCS 5100 or MCS 5200 PBX. NOTE: This mode
is not fully supported.
Requires user role: ADMIN
Value space: <1..480>
Range: Select a value from 1 to 480 minutes.
Example: Standby Delay: 10
Standby BootAction
Define the camera position after a restart of the codec.
Requires user role: ADMIN
Value space: <None/Preset1/Preset2/Preset3/Preset4/Preset5/Preset6/Preset7/
Preset8/Preset9/Preset10/Preset11/Preset12/Preset13/Preset14/Preset15/
RestoreCameraPosition/DefaultCameraPosition>
None: No action.
Preset1 to Preset15: After a reboot the camera position will be set to the position defined by
the selected preset.
RestoreCameraPosition: After a reboot the camera position will be set to the position it had
before the last boot.
DefaultCameraPosition: After a reboot the camera position will be set to the factory default
position.
Example: SIP Profile 1 Type: Standard
Example: Standby BootAction: DefaultCameraPosition
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
65
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
The SystemUnit settings
Standby StandbyAction
Define the camera position when going into standby mode.
Requires user role: ADMIN
SystemUnit Name
Value space: <None/PrivacyPosition>
None: No action.
PrivacyPosition: Turns the camera to a sideways position for privacy.
Enter a System Name to define a name of the system unit. If the H.323 Alias ID is configured
on the system then this ID will be used instead of the system name. The system name will be
displayed:
Example: Standby StandbyAction: PrivacyPosition
1) When the codec is acting as an SNMP Agent.
2) Towards a DHCP server.
Standby WakeupAction
Requires user role: ADMIN
Define the camera position when leaving standby mode.
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Requires user role: ADMIN
Value space: <None/Preset1/Preset2/Preset3/Preset4/Preset5/Preset6/Preset7/
Preset8/Preset9/Preset10/Preset11/Preset12/Preset13/Preset14/Preset15/
RestoreCameraPosition/DefaultCameraPosition>
None: No action.
Preset1 to Preset15: When leaving standby the camera position will be set to the position
defined by the selected preset.
RestoreCameraPosition: When leaving standby the camera position will be set to the position it
had before entering standby.
DefaultCameraPosition: When leaving standby the camera position will be set to the factory
default position.
Example: SystemUnit Name: "Meeting Room"
SystemUnit MenuLanguage
Select the language to be used in the menus on screen.
Requires user role: USER
Value space: <English/ChineseSimplified/ChineseTraditional/Czech/Danish/
Dutch/Finnish/French/German/Hungarian/Italian/Japanese/Korean/Norwegian/
Polish/PortugueseBrazilian/Russian/Spanish/SpanishLatin/Swedish/Turkish>
Example: SystemUnit MenuLanguage: English
Example: Standby WakeupAction: RestoreCameraPosition
SystemUnit ContactInfo Type
Describes which parameter to put in the status field in the upper left corner on the screen display.
The information can also be read with the command xStatus SystemUnit ContactInfo.
Requires user role: ADMIN
Value space: <Auto/None/IPv4/IPv6/H323Id/E164Alias/SipUri/SystemName>
Auto: Shows the address which another system can dial to reach this system, depending on the
default call protocol and system registration.
None: Do not show any contact information.
IPv4: Shows the IPv4 address as the contact information.
IPv6: Shows the IPv6 address as the contact information.
H323Id: Shows the H323 ID as the contact information.
E164Alias: Shows the H323 E164 Alias as the contact information.
SipUri: Shows the SIP URI as the contact information.
SystemName: Shows the system name as the contact information.
Example: SystemUnit ContactInfo Type: Auto
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
66
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
The Time settings
SystemUnit Type
Select whether the video system is for personal use or to be used in a multiuser environment. It is
highly recommended to use the default setting.
Requires user role: ADMIN
Time Zone
Value space: <Personal/Shared>
Personal: Set to Personal when the system is for personal use.
Shared: Set to Shared when the system is used in a multiuser environment.
Requires user role: USER
Set the time zone where the system is located, using Windows time zone description format.
Value space: <GMT-12:00 (International Date Line West)/GMT-11:00 (Midway
Island, Samoa)/GMT-10:00 (Hawaii)/GMT-09:00 (Alaska)/GMT-08:00 (Pacific
Time (US & Canada); Tijuana)/GMT-07:00 (Arizona)/GMT-07:00 (Mountain Time
(US & Canada))/GMT-07:00 (Chihuahua, La Paz, Mazatlan)/GMT-06:00 (Central
America)/GMT-06:00 (Saskatchewan)/GMT-06:00 (Guadalajara, Mexico City,
Monterrey)/GMT-06:00 (Central Time (US & Canada))/GMT-05:00 (Indiana
(East))/GMT-05:00 (Bogota, Lima, Quito)/GMT-05:00 (Eastern Time (US &
Canada))/GMT-04:30 (Caracas)/GMT-04:00 (La Paz)/GMT-04:00 (Santiago)/
GMT-04:00 (Atlantic Time (Canada))/GMT-03:30 (Newfoundland)/GMT-03:00
(Buenos Aires, Georgetown)/GMT-03:00 (Greenland)/GMT-03:00 (Brasilia)/
GMT-02:00 (Mid-Atlantic)/GMT-01:00 (Cape Verde Is.)/GMT-01:00 (Azores)/
GMT (Casablanca, Monrovia)/GMT (Coordinated Universal Time)/GMT (Greenwich
Mean Time : Dublin, Edinburgh, Lisbon, London)/GMT+01:00 (West Central
Africa)/GMT+01:00 (Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna)/
GMT+01:00 (Brussels, Copenhagen, Madrid, Paris)/GMT+01:00 (Sarajevo,
Skopje, Warsaw, Zagreb)/GMT+01:00 (Belgrade, Bratislava, Budapest,
Ljubljana, Prague)/GMT+02:00 (Harare, Pretoria)/GMT+02:00 (Jerusalem)/
GMT+02:00 (Athens, Istanbul, Minsk)/GMT+02:00 (Helsinki, Kyiv, Riga,
Sofia, Tallinn, Vilnius)/GMT+02:00 (Cairo)/GMT+02:00 (Bucharest)/
GMT+03:00 (Nairobi)/GMT+03:00 (Kuwait, Riyadh)/GMT+03:00 (Moscow, St.
Petersburg, Volgograd)/GMT+03:00 (Baghdad)/GMT+03:30 (Tehran)/GMT+04:00
(Abu Dhabi, Muscat)/GMT+04:00 (Baku, Tbilisi, Yerevan)/GMT+04:30 (Kabul)/
GMT+05:00 (Islamabad, Karachi, Tashkent)/GMT+05:00 (Ekaterinburg)/
GMT+05:30 (Chennai, Kolkata, Mumbai, New Delhi)/GMT+05:45 (Kathmandu)/
GMT+06:00 (Sri Jayawardenepura)/GMT+06:00 (Astana, Dhaka)/GMT+06:00
(Almaty, Novosibirsk)/GMT+06:30 (Rangoon)/GMT+07:00 (Bangkok, Hanoi,
Jakarta)/GMT+07:00 (Krasnoyarsk)/GMT+08:00 (Perth)/GMT+08:00 (Taipei)/
GMT+08:00 (Kuala Lumpur, Singapore)/GMT+08:00 (Beijing, Chongqing,
Hong Kong, Urumqi)/GMT+08:00 (Irkutsk, Ulaan Bataar)/GMT+09:00 (Osaka,
Sapporo, Tokyo)/GMT+09:00 (Seoul)/GMT+09:00 (Yakutsk)/GMT+09:30 (Darwin)/
GMT+09:30 (Adelaide)/GMT+10:00 (Guam, Port Moresby)/GMT+10:00 (Brisbane)/
GMT+10:00 (Vladivostok)/GMT+10:00 (Hobart)/GMT+10:00 (Canberra, Melbourne,
Sydney)/GMT+11:00 (Magadan, Solomon Is., New Caledonia)/GMT+12:00 (Fiji,
Kamchatka, Marshall Is.)/GMT+12:00 (Auckland, Wellington)/GMT+13:00 (Nuku
alofa)>
Range: Select a time zone from the list time zones. If using a command line interface; watch up
for typos.
Example: SystemUnit Type: Shared
SystemUnit CallLogging Mode
Set the call logging mode for calls that are received or placed by the system. The call logs may
then be viewed via the web interface or using the xHistory command.
Requires user role: ADMIN
Value space: <On/Off>
On: Enable logging.
Off: Disable logging.
Example: SystemUnit CallLogging Mode: On
SystemUnit IrSensor
Both the Codec C Series and PrecisionHD camera have IR sensors, and only one of them needs to
be enabled at the time. The IR sensor LED is located on the front of the codec and the camera and
flickers when an IR signal is received from the remote control.
Requires user role: ADMIN
Value space: <On/Off/Auto>
On: Enable the IR sensor on the codec.
Off: Disable the IR sensor on the codec.
Auto: The system will automatically disable the IR sensor on the codec if the IR sensor at
camera is enabled. Otherwise, the IR sensor on the codec will be enabled.
Example: SystemUnit IrSensor: Auto
Example: Time Zone: "GMT (Greenwich Mean Time : Dublin, Edinburgh, Lisbon,
London)"
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
67
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
The UserInterface settings
Time TimeFormat
Set the time format.
Requires user role: USER
UserInterface TouchPanel DefaultPanel
Value space: <24H/12H>
24H: Set the time format to 24 hours.
12H: Set the time format to 12 hours (AM/PM).
Select whether to display the list of contacts or the list of scheduled meetings on the Touch panel
as default.
Requires user role: USER
Example: Time TimeFormat: 24H
Set the date format.
Value space: <ContactList/MeetingList>
ContactList: The contact list (favorites, directory and history) will appear as default on the Touch
panel.
MeetingList: The list of scheduled meetings will appear as default on the Touch panel.
Requires user role: USER
Example: UserInterface TouchPanel DefaultPanel: ContactList
Time DateFormat
Value space: <DD_MM_YY/MM_DD_YY/YY_MM_DD>
DD_MM_YY: The date January 30th 2010 will be displayed: 30.01.10
MM_DD_YY: The date January 30th 2010 will be displayed: 01.30.10
YY_MM_DD: The date January 30th 2010 will be displayed: 10.01.30
Example: Time DateFormat: DD_MM_YY
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
68
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
The Video settings
Password protection
Administrator guide
Appendices
Contact us
Video Input Source [1..3] Type
Set which type of input source is connected to the video input.
Requires user role: ADMIN
Video Input Source [1..3] Name
Value space: <other/camera/PC/DVD/document_camera>
Other: Select Other when some other type of equipment is connected to the selected video
input.
Camera: Select Camera when you have a camera connected to the selected video input.
PC: Select PC when you have a PC connected to the selected video input.
DVD: Select DVD when you have a DVD player connected to the selected video input.
Document_Camera: Select Document_Camera when you have a document camera connected
to the selected video input.
Enter a name for the video input source.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example: Video Input Source 1 Name: ""
Video Input Source [1] Connector
Example: Video Input Source 1 Type: PC
Select which video input connector to be active on video input source 1.
Requires user role: ADMIN
Video Input Source [1..3] CameraControl Mode
Value space: <HDMI>
HDMI: Select HDMI when you want to use the HDMI 1 as input source 1.
Select whether or not to enable camera control for the selected video input source when the video
input is active.
Example: Video Input Source 1 Connector: HDMI
Requires user role: ADMIN
NOTE: Codec C40 has one DVI input (DVI-I 3). Codec C60 has two DVI inputs (DVI-I 2 and 3).
Value space: <On/Off>
On: Enable camera control.
Off: Disable camera control.
Select which video input connector to be active on video input source 2.
Example: Video Input Source 1 CameraControl Mode: On
Video Input Source [2] Connector
Requires user role: ADMIN
Value space: <HDMI/DVI>
HDMI: Select HDMI when you want to use the HDMI 2 as input source 2.
DVI: Select DVI-I when you want to use the DVI-I 2 as input source 2.
Video Input Source [1..3] CameraControl CameraId
Example: Video Input Source 2 Connector: HDMI
Requires user role: ADMIN
Video Input Source [3] Connector
Value space: <1/2/3/4/5/6/7>
Range: Select the ID of the camera in the Visca chain.
NOTE: Codec C40 has one DVI input (DVI-I 3). Codec C60 has two DVI inputs (DVI-I 2 and 3).
Example: Video Input Source 1 CameraControl CameraId: 1
Select the ID of the camera in the Visca chain that is connected to this camera source. The
CameraId setting represents the camera's position in the Visca chain.
Select which video input connector to be active on video input source 3.
Requires user role: ADMIN
Value space: <DVI/Composite/YC>
DVI: Select DVI-I when you want to use the DVI-I 3 as input source 3.
Composite: Select Composite when you want to use the Composite as input source 3.
YC: Select YC when you want to use the S-Video (YC) as input source 3. Connect to the two
connectors marked Y/Comp and C.
Example: Video Input Source 3 Connector: DVI
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
69
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Video Input Source [1..3] OptimalDefinition Profile
Video Input Source [1..3] OptimalDefinition Threshold60fps
The Video Input Source Quality setting must be set to Motion for the optimal definition settings to
take any effect.
For each video input, this setting tells the system the lowest resolution where it should transmit
60fps. So for all resolutions lower than this, the maximum transmitted framerate would be 30fps,
while above this resolution 60fps would also be possible, if the available bandwidth is adequate.
The optimal definition profile should reflect the lighting conditions in your room and the quality of
the video input (camera); the better the lighting conditions and video input, the higher the profile.
Then, in good lighting conditions, the video encoder will provide better quality (higher resolution or
frame rate) for a given call rate.
Requires user role: ADMIN
Value space: <512_288/768_448/1024_576/1280_720/Never>
512_288: Set the threshold to 512x288.
768_448: Set the threshold to 768x448.
1024_576: Set the threshold to 1024x576.
1280_720: Set the threshold to 1280x720.
Never: Do not set a threshold for transmitting 60fps.
Generally, we recommend using the Normal or Medium profiles. However, when the lighting
conditions are good, the High profile can be set in order to increase the resolution for a given call
rate.
Some typical resolutions used for different optimal definition profiles, call rates and transmit frame
rates are shown in the table below. It is assumed that dual video is not used. The resolution must
be supported by both the calling and called systems.
Example: Video Input Source 1 OptimalDefinition Threshold60fps: 1280_720
Use the Video Input Source OptimalDefinition Threshold60fps setting to decide when to use the 60
fps frame rate.
Video Input Source [1..3] Quality
When encoding and transmitting video there will be a trade-off between high resolution and
high framerate. For some video sources it is more important to transmit high framerate than high
resolution and vice versa. The Quality setting specifies whether to give priority to high frame rate or
to high resolution for a given source.
Typical resolutions used for different optimal definition profiles, call rates and frame rates
Frame
rate
30 fps
60 fps
.
Optimal
Definition
Profile
256 kbps
768 kbps
1152 kbps 1472 kbps 2560 kbps
Normal
512 × 288
1024 × 576
1280 × 720
1280 × 720 1920 × 1080 1920 × 1080 1920 × 1080
Medium
640 × 360
1280 × 720
1280 × 720
1280 × 720 1920 × 1080 1920 × 1080 1920 × 1080
High
768 × 448
1280 × 720
1280 × 720 1920 × 1080 1920 × 1080 1920 × 1080 1920 × 1080
Normal
256 × 144
512 × 288
768 × 448
Call rate
1024 × 576
1280 × 720
4 Mbps
1280 × 720
Requires user role: ADMIN
6 Mbps
Value space: <Motion/Sharpness>
Motion: Gives the highest possible framerate. Used when there is a need for higher frame rates,
typically when a large number of participants are present or when there is a lot of motion in the
picture.
Sharpness: Gives the highest possible resolution. Used when you want the highest quality of
detailed images and graphics.
1280 × 720
Medium
256 × 144
768 × 448
1024 × 576
1024 × 576
1280 × 720
1280 × 720
1280 × 720
High
512 × 288
1024 × 576
1280 × 720
1280 × 720
1280 × 720
1280 × 720
1280 × 720
Example: Video Input Source 1 Quality: Motion
Requires user role: ADMIN
Video DefaultPresentationSource
Value space: <Normal/Medium/High>
Normal: Use this profile for a normally to poorly lit environment. Resolutions will be set rather
conservative.
Medium: Requires good and stable lighting conditions and a good quality video input. For some
call rates this leads to higher resolution.
High: Requires nearly optimal video conferencing lighting conditions and a good quality video
input in order to achieve a good overall experience. Rather high resolutions will be used.
Requires user role: USER
Define which video input source shall be used as the default presentation source (when you
press the Presentation key on the remote control). The input source is configured to a video input
connector.
Value space: <1/2/3/4/5>
Range: Select the video source to be used as the presentation source.
Example: Video DefaultPresentationSource: 3
Example: Video Input Source 1 OptimalDefinition Profile: Normal
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
70
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Video Input DVI [3]/[2..3] Type
Video Layout ScaleToFrame
NOTE: Codec C40 has one DVI input (DVI-I 3). Codec C60 has two DVI inputs (DVI-I 2 and 3).
Define what to do if the aspect ratio of a video input source doesn't match the aspect ratio of the
corresponding image frame in a composition. For example if you have a 4:3 input source (like XGA)
to be displayed on a 16:9 output (like HD720).
The official DVI standard supports both digital and analog signals. In most cases the default
AutoDetect setting can detect whether the signal is analog RGB or digital. However, in some rare
cases when DVI-I cables are used (these cables can carry both the analog and digital signals) the
auto detection fails. This setting makes it possible to override the AutoDetect and select the correct
DVI video input.
Requires user role: ADMIN
Value space: <Manual/MaintainAspectRatio/StretchToFit>
Manual: If the difference in aspect ratio between the video input source and the target image
frame is less than the ScaleToFrameThreshold configuration (in percent), the image is stretched
to fit. If not, the system will maintain the original aspect ratio.
MaintainAspectRatio: Will maintain the aspect ratio of the input source, and fill in black in the
rest of the frame (letter boxing or pillar boxing).
StretchToFit: Will stretch (horizontally or vertically) the input source to fit into the image frame.
NOTE: The general limitation is that you cannot upscale in one direction and at the same time
downscale in the other direction. In such situations the codec will apply letterboxing.
This setting should also be used if the video input is an analog component (YPbPr) type signal. This
is used by some cameras (Sony EVI-HD1) and DVD/Blu-ray players. Since it is not possible to auto
detect the difference between AnalogRGB and AnalogYPbPr, the AnalogYPbPr setting must be
selected.
Requires user role: ADMIN
Value space: <AutoDetect/Digital/AnalogRGB/AnalogYPbPr>
AutoDetect: Set to AutoDetect to automatically detect if the signal is analog RGB or digital.
Digital: Set to Digital to force the DVI video input to Digital when using DVI-I cables with both
analog and digital pins and AutoDetect fails.
AnalogRGB: Set to AnalogRGB to force the DVI video input to AnalogRGB when using DVI-I
cables with both analog and digital pins and AutoDetect fails.
AnalogYPbPr: Set to AnalogYPbPr to force the DVI video input to AnalogYPbPr, as the
component (YPbPr) signal cannot be auto detected.
Example: Video Layout ScaleToFrame: MaintainAspectRatio
Video Layout ScaleToFrameThreshold
Only applicable if the ScaleToFrame configuration is set to manual. If the difference in
aspect ratio between the video input source and the target image frame is less than the
ScaleToFrameThreshold configuration (in percent), the image is stretched to fit. If not, the system
will maintain the original aspect ratio.
Example: Video Input DVI 3 Type: AutoDetect
Requires user role: ADMIN
Video Layout Scaling
Value space: <0..100>
Range: Select a value from 0 to 100 percent.
Define how the system shall adjust the aspect ratio for images or frames when there is a difference
between the image and the frame it is to be placed in.
Example: Video Layout ScaleToFrameThreshold: 5
Requires user role: ADMIN
Value space: <On/Off>
On: Let the system automatically adjust aspect ratio.
Off: No adjustment of the aspect ratio.
Video SelfviewPosition
Select where the small selfview PiP (Picture-in-Picture) will appear on screen.
Requires user role: ADMIN
Example: Video Layout Scaling: On
Value space: <UpperLeft/UpperRight/LowerLeft/LowerRight/CenterRight>
UpperLeft: The selfview PiP will appear in the upper left corner of the screen.
UpperRight: The selfview PiP will appear in the upper right corner of the screen.
LowerLeft: The selfview PiP will appear in the lower left corner of the screen.
LowerRight: The selfview PiP will appear in the lower right corner of the screen.
CenterRight: The selfview PiP will appear in to the right side of the screen, in center.
Example: Video SelfviewPosition: LowerRight
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
71
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Video Layout LocalLayoutFamily
Video Monitors
Select which video layout family to be used locally.
Set the monitor layout mode.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <Auto/FullScreen/Equal/PresentationSmallSpeaker/
PresentationLargeSpeaker>
Auto: The default layout family, as given by the layout database, will be used as the local layout.
For more information about the layout database, see the xCommand Video Layout LoadDb
command.
FullScreen: The FullScreen layout family will be used as the local layout.
Equal: The Equal layout family will be used as the local layout.
PresentationSmallSpeaker: The PresentationSmallSpeaker layout family will be used as the local
layout.
PresentationLargeSpeaker: The PresentationLargeSpeaker layout family will be used as the local
layout.
Value space: <Single/Dual/DualPresentationOnly>
Single: The same layout is shown on all monitors.
Dual: The layout is distributed on two monitors.
DualPresentationOnly: All participants in the call will be shown on the first monitor, while the
presentation (if any) will be shown on the second monitor.
Example: Video Layout LocalLayoutFamily: Auto
Requires user role: ADMIN
Video Layout RemoteLayoutFamily
Value space: <On/Off>
On: Display the on screen menus, icons and indicators.
Off: Hide the on screen menus, icons and indicators.
Example: Video Monitors: Single
Video OSD Mode
The Video OSD (On Screen Display) Mode lets you define if information and icons should be
displayed on screen.
Select which video layout family to be used for the remote participants.
Example: Video OSD Mode: On
Requires user role: ADMIN
Value space: <Auto/FullScreen/Equal/PresentationSmallSpeaker/
PresentationLargeSpeaker>
Auto: The default layout family, as given by the local layout database, will be used as the remote
layout. For more information about the layout database, see the command: xCommand Video
Layout LoadDb.
FullScreen: The FullScreen layout family will be used as the remote layout.
Equal: The Equal layout family will be used as the remote layout.
PresentationSmallSpeaker: The PresentationSmallSpeaker layout family will be used as the
remote layout.
PresentationLargeSpeaker: The PresentationLargeSpeaker layout family will be used as the
remote layout.
Video OSD AutoSelectPresentationSource
Determine if the presentation source should be automatically selected.
Requires user role: ADMIN
Value space: <On/Off>
On: Enable automatic selection of the presentation source.
Off: Disable automatic selection of the presentation source.
Example: Video OSD AutoSelectPresentationSource: Off
Video OSD TodaysBookings
Example: Video Layout RemoteLayoutFamily: Auto
This setting can be used to display the systems bookings for today on the main OSD menu. This
requires that the system is bookable by an external booking system, like Cisco TelePresence
Management Suite (TMS).
Video MainVideoSource
Requires user role: ADMIN
Define which video input source shall be used as the main video source.
Value space: <On/Off>
On: Displays information about this systems bookings on screen.
Off: Do not display todays bookings.
Requires user role: USER
Value space: <1/2/3>
Range: Select the source to be used as the main video source.
Example: Video OSD TodaysBookings: Off
Example: Video MainVideoSource: 1
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
72
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Video OSD MyContactsExpanded
Video OSD InputMethod Cyrillic
Set how the local contacts will be displayed in the phone book dialog in the OSD (On Screen
Display).
Set the Cyrillic mode for the menu input language in the menus on screen.
Requires user role: ADMIN
Value space: <On/Off>
On: Cyrillic mode is available as a menu input language in the menus on screen. This will enable
the setting xConfiguration Video OSD InputMethod InputLanguage.
Off: Cyrillic mode is NOT available as a menu input language in the menus on screen.
Requires user role: ADMIN
Value space: <On/Off>
On: The local contacts in the phone book will be shown in the top level of the phonebook dialog.
Off: The local contacts will be placed in a separate folder called MyContacts in the phonebook
dialog.
Example: Video OSD InputMethod Cyrillic: Off
Example: Video OSD MyContactsExpanded: Off
Video OSD LoginRequired
Video OSD Output
Determine if the system should require the user to login before accessing the On Screen Display
(OSD). If enabled, the user must enter his username and his PIN. After the user has logged in he
can only execute to the configurations changes and commands allowed by his Role.
The Video OSD (On Screen Display) Output lets you define which monitor should display the on
screen menus, information and icons. By default the OSD is sent to the monitor connected to the
Video OSD Output 1. If you cannot see the OSD on screen, then you must re-configure the OSD
Output. You can do this by entering a key sequence on the remote control, from the web interface,
or by a command line interface.
Requires user role: ADMIN
Value space: <On/Off>
On: The user must log in to access the On Screen Display (OSD).
Off: No login to the OSD is required.
Using the remote control: Press the Disconnect key followed by: * # * # 0 x # (where x is output 1
to 2).
Example: Video OSD LoginRequired: Off
Using the web interface: Open a web browser and enter the IP address of the codec. Open the
Advanced Configuration menu and navigate to Video OSD Output and select the video output.
Video AllowWebSnapshots
Using a command line interface: Open a command line interface and connect to the codec (if in
doubt of how to do this, see the API Guide for the codec). Enter the command: xConfiguration
Video OSD Output [1..2] (select the OSD Output)
Allow or disallow that snapshots captured by the video input main source can be displayed in the
web interface Call Control page.
NOTE: This feature is disabled by default, and must be enabled from the On Screen Display (OSD),
from a directly connected Touch controller, or when connected directly to the serial port (COM 1
port) on the codec.
Requires user role: ADMIN
Value space: <1/2>
Range: Select 1 for HDMI 1 output, or select 2 for DVI-I 2 output.
Requires user role: ADMIN
Example: Video OSD Output: 1
Value space: <On/Off>
On: If set to on, a web snapshot can be generated and displayed on the web interface.
Off: The generation of web snapshots is not allowed.
Video OSD InputMethod InputLanguage
The codec can be enabled for Cyrillic input characters in the menus on screen. NOTE: Requires
that xConfiguration Video OSD inputMethod Cyrillic is set to On.
Example: Video AllowWebSnapshots: Off
Requires user role: ADMIN
Value space: <Latin/Cyrillic>
Latin: Latin characters can be entered when using the remote control (default).
Cyrillic: Cyrillic characters can be entered using the remote control. NOTE: Requires a Cisco
TelePresence Remote Control with Cyrillic fonts.
Example: Video OSD InputMethod InputLanguage: Latin
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
73
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Video Output HDMI [1] CEC Mode
Video Output HDMI [1] Resolution
The HDMI outputs support Consumer Electronics Control (CEC). When set to on (default is off),
and the monitor connected to the HDMI output is CEC compatible and CEC is configured, the
system will use CEC to set the monitor in standby when the system enters standby. Likewise the
system will wake up the monitor when the system wakes up from standby. Please note that the
different manufacturers uses different marketing names for CEC: Anynet+ (Samsung); Aquos Link
(Sharp); BRAVIA Sync (Sony); HDMI-CEC (Hitachi); Kuro Link (Pioneer); CE-Link and Regza Link
(Toshiba); RIHD (Onkyo); SimpLink (LG); HDAVI Control, EZ-Sync, VIERA Link (Panasonic); EasyLink
(Philips); and NetCommand for HDMI (Mitsubishi).
Select the preferred resolution for the monitor connected to the video output HDMI connector. This
will force the resolution on the monitor.
Requires user role: ADMIN
Value space: <Auto/640_480_60/800_600_60/1024_768_60/1280_1024_60/1280_720_5
0/1280_720_60/1920_1080_50/1920_1080_60/1280_768_60/1360_768_60/1366_768_6
0/1600_1200_60/1680_1050_60/1920_1200_60>
Auto: The system will automatically try to set the optimal resolution based on negotiation with
the connected monitor.
Range: 640x480@60p, 800x600@60p, 1024x768@60p, 1280x1024@60p, 1280x720@50p,
1280x720@60p, 1920x1080@50p, 1920x1080@60p, 1280x768@60p, 1360x768@60p,
1366x768@60p, 1600x1200@60p, 1680x1050@60p, 1920x1200@60p
Requires user role: ADMIN
Value space: <On/Off>
On: Enable CEC control.
Off: Disable CEC control.
Example: Video Output HDMI 1 Resolution: 1920_1080_60
Example: Video Output HDMI 1 CEC Mode: Off
Video Output DVI [2] MonitorRole
Video Output HDMI [1] MonitorRole
The DVI monitor role describes what video stream will be shown on the monitor connected to the
video output DVI-I connector. Applicable only if the "Video > Monitors" configuration is set to dual.
The HDMI monitor role describes what video stream will be shown on the monitor connected to the
video output HDMI connector. Applicable only if the "Video > Monitors" configuration is set to dual.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <First/Second/PresentationOnly>
First: Show main video stream.
Second: Show presentation video stream if active, or other participants.
PresentationOnly: Show presentation video stream if active, and nothing else.
Value space: <First/Second/PresentationOnly>
First: Show main video stream.
Second: Show presentation video stream if active, or other participants.
PresentationOnly: Show presentation video stream if active, and nothing else.
Example: Video Output DVI 2 MonitorRole: Second
Example: Video Output HDMI 1 MonitorRole: First
Video Output DVI [2] OverscanLevel
Video Output HDMI [1] OverscanLevel
Some TVs or other monitors may not display the whole image sent out on the systems video
output, but cuts the outer parts of the image. In this case this setting can be used to let the system
not use the outer parts of video resolution. Both the video and the OSD menu will be scaled in this
case.
Some TVs or other monitors may not display the whole image sent out on the systems video
output, but cuts the outer parts of the image. In this case this setting can be used to let the system
not use the outer parts of video resolution. Both the video and the OSD menu will be scaled in this
case.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <Medium/High/None>
Medium: The system will not use the outer 3% of the output resolution.
High: The system will not use the outer 6% of the output resolution
None: The system will use all of the output resolution.
Value space: <Medium/High/None>
Medium: The system will not use the outer 3% of the output resolution.
High: The system will not use the outer 6% of the output resolution
None: The system will use all of the output resolution.
Example: Video Output DVI 2 OverscanLevel: None
Example: Video Output HDMI 1 OverscanLevel: None
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
74
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Video Output DVI [2] Resolution
Video Output Composite [3] Resolution
Select the preferred resolution for the monitor connected to the video output DVI-I connector. This
will force the resolution on the monitor.
NOTE: This command is not supported on Codec C40.
Contact us
Select the preferred resolution for the monitor connected to the video output Composite
connector. This will force the resolution on the monitor.
Requires user role: ADMIN
Value space: <Auto/640_480_60/800_600_60/1024_768_60/1280_1024_60/1280_720_5
0/1280_720_60/1920_1080_50/1920_1080_60/1280_768_60/1360_768_60/1366_768_6
0/1600_1200_60/1680_1050_60/1920_1200_60>
Auto: The system will automatically try to set the optimal resolution based on negotiation with
the connected monitor.
Range: 640x480@60p, 800x600@60p, 1024x768@60p, 1280x1024@60p, 1280x720@50p,
1280x720@60p, 1920x1080@50p, 1920x1080@60p, 1280x768@60p, 1360x768@60p,
1366x768@60p, 1600x1200@60p, 1680x1050@60p, 1920x1200@60p
Requires user role: ADMIN
Example: Video Output DVI 2 Resolution: 1024_768_60
Requires user role: USER
Video Output Composite [3] MonitorRole
Value space: <On/Off>
On: Display selfview on screen.
Off: Do not display selfview on screen.
Value space: <PAL/NTSC>
Range: PAL, NTSC
Example: Video Output Composite 3 Resolution: NTSC
Video Selfview
Determine if the main video source (selfview) shall be displayed on screen.
NOTE: This command is not supported on Codec C40.
The Composite monitor role describes what video stream will be shown on the monitor connected
to the video output Composite connector. Applicable only if the monitor configuration is set to dual.
Example: Video Selfview: On
Requires user role: ADMIN
Video WallPaper
Value space: <First/Second/PresentationOnly>
First: Show main video stream.
Second: Show presentation video stream if active, or other participants.
PresentationOnly: Show presentation video stream if active, and nothing else.
Select a background image for the video screen when idle. The background image on the Touch
controller is not changed.
Requires user role: USER
Value space: <None/Growing/Summersky/Custom/Waves>
None: There will not be a background image on the screen.
Summersky, Growing, Waves: The selected background image will be shown on the screen.
Custom: If a custom wallpaper is uploaded to the codec, it will be used as background image on
the screen. If not, there will be no background image.
Use the web interface to upload a custom wallpaper to the codec.
1) On the codec: With a remote control, open the menu on screen and go to Home > Settings
> System information to find the IP address. With a Touch controller, tap More > Settings >
System Information to find the IP address.
2) On your computer: Open a web browser and enter the IP address of the codec in the
address bar. Hover the mouse over the Configuration tab and select "Wallpaper". Browse for
the file and press the "Upload" button. The maximum supported resolution is 1920x1200.
Example: Video Output Composite 3 MonitorRole: First
Video Output Composite [3] OverscanLevel
NOTE: This command is not supported on Codec C40.
Some TVs or other monitors may not display the whole image sent out on the systems video
output, but cuts the outer parts of the image. In this case this setting can be used to let the system
not use the outer parts of video resolution. Both the video and the OSD menu will be scaled in this
case.
Requires user role: ADMIN
Value space: <Medium/High/None>
Medium: The system will not use the outer 3% of the output resolution.
High: The system will not use the outer 6% of the output resolution
None: The system will use all of the output resolution.
Example: Video Wallpaper: Summersky
Example: Video Output Composite 3 OverscanLevel: None
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
75
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
The Experimental settings
Password protection
Administrator guide
Appendices
Contact us
Experimental Audio EcReferenceDelay
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
The Experimental settings are beta preview features and can be used 'as is'. They are not fully
documented.
Requires user role: ADMIN
NOTE: The Experimental settings are likely to change without further notice.
Value space: <0..300>
Example: Experimental Audio EcReferenceDelay: 0
Experimental Audio Panning Mode
Experimental Audio Input Microphone [1..2]/[1..4] EchoControl HighPassFilter
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Value space: <Off/Auto>
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone connectors.
Example: Experimental Audio Panning Mode: Off
Requires user role: ADMIN
Value space: <On/Off>
Experimental Audio Panning MaxAngle
Example: Experimental Audio Input Microphone 1 EchoControl HighPassFilter:
Off
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Experimental Audio Input Microphone [1..2]/[1..4] EchoControl ResidualEchoMasking
Value space: <0..90>
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Example: Experimental Audio Panning MaxAngle: 0
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone connectors.
Requires user role: ADMIN
Experimental Audio Panning MonitorLeft
Value space: <Normal/Aggressive>
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Example: Experimental Audio Input Microphone 1 EchoControl
ResidualEchoMasking: Normal
Requires user role: ADMIN
Value space: <1/2/3/4/5>
Experimental Audio Input Microphone [1..2]/[1..4] Channel
Example: Experimental Audio Panning MonitorLeft: 1
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Experimental Audio Panning MonitorRight
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone connectors.
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Defines whether the signal from the microphone is a mono signal or part of a multichannel signal.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <1/2/3/4/5>
Value space: <Left/Right/Mono>
Left: The microphone signal is the left channel of a stereo signal.
Right: The microphone signal is the right channel of a stereo signal.
Mono: The microphone signal is a mono signal.
Example: Experimental Audio Panning MonitorRight: 1
Example: Experimental Audio Input Microphone 1 Channel: Mono
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
76
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Experimental Audio MicrophoneReinforcement Gain
Experimental Audio MicrophoneReinforcement Output Line [1..2] Mode
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Microphone reinforcement is local amplification of one or several input connectors, directly to one
or several output connectors, with minimum delay.
Microphone reinforcement is local amplification of one or several input connectors, directly to one
or several output connectors, with minimum delay.
For software version TC4.0: Microphone reinforcement should not be enabled on a codec that is
also configured using the Audio Console application.
For software version TC4.0: Microphone reinforcement should not be enabled on a codec that is
also configured using the Audio Console application.
This setting configures the gain of this path, from -53 dB to +15 dB. The value -54 corresponds to
mute.
Configuring this setting to On for an output line, means to attach that output connector to the
microphone reinforcement for local amplification. If the output connector already is attached
to a Local Output, it will first be detached from that before being attached to the Microphone
reinforcement. When this setting is On, the output connector cannot be attached to any Local
Output.
Requires user role: ADMIN
Value space: <-54..15>
Example: Experimental Audio MicrophoneReinforcement Gain: -19
Requires user role: ADMIN
Value space: <On/Off>
Experimental Audio MicrophoneReinforcement AGC
Example: Experimental Audio MicrophoneReinforcement Output Line 1 Mode: On
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Experimental CapsetFilter
Microphone reinforcement is local amplification of one or several input connectors, directly to one
or several output connectors, with minimum delay.
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
For software version TC4.0: Microphone reinforcement should not be enabled on a codec that is
also configured using the Audio Console application.
Requires user role: ADMIN
Value space: <S: 0, 100>
This setting controls an AGC on the mix of all input connectors attached to the Microphone
reinforcement.
Example: Experimental CapsetFilter: ""
Requires user role: ADMIN
Value space: <On/Off>
Experimental CapsetReduction
Example: Experimental Audio MicrophoneReinforcement AGC: Off
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Experimental Audio MicrophoneReinforcement Input Microphone [1..4] Mode
Requires user role: ADMIN
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Example: Experimental CapsetReduction: Auto
Value space: <Auto/Reduced>
Microphone reinforcement is local amplification of one or several input connectors, directly to one
or several output connectors, with minimum delay.
For software version TC4.0: Microphone reinforcement should not be enabled on a codec that is
also configured using the Audio Console application.
Configuring this setting to On for a microphone, means to attach it to the microphone
reinforcement for local amplification. This is done in parallel to the microphone's existing
connections, and will not affect any of these.
Requires user role: ADMIN
Value space: <On/Off>
Example: Experimental Audio MicrophoneReinforcement Input Microphone 1
Mode: On
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
77
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Contact us
Experimental Conference [1..1] PacketLossResilience ForwardErrorCorrection
Experimental Conference [1..1] Multistream OutputCount
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change
Will enable ForwardErrorCorrection (RFC5109) mechanism as part of the PacketLossResilience
mechanism. Default value is On.
Requires user role: ADMIN
On: Forward error correction will be used as part of the PacketLossResilience mechanism.
Example: Experimental Conference 1 Multistream OutputCount: 1
Value space: <1..4>
Off: Forward error correction will NOT be used as part of the PacketLossResilience mechanism.
Requires user role: ADMIN
Experimental Conference [1..1] Multistream Stream [1..4] Source
Value space: <On/Off>
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Example: Experimental Conference 1 PacketLossResilience
ForwardErrorCorrection: On
Requires user role: ADMIN
Value space: <1/2/3>
Experimental Conference [1..1] PacketLossResilience RateAdaption
Example: Experimental Conference 1 Multistream Stream 1 Source: 1
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Experimental Conference [1..1] ReceiverBasedDownspeeding
Will use the a RateAdaption algorithm adapted to the PacketLossResilience mechanism. Default
value is On.
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <On/Off>
On: RateAdaption will be used as part of the PacketLossResilience mechanism.
Off: RateAdaption will NOT be used as part of the PacketLossResilience mechanism.
Value space: <On/Off>
Example: Experimental Conference 1 ReceiverBasedDownspeeding: Off
Example: Experimental Conference 1 PacketLossResilience RateAdaption: On
Experimental CustomSoftbuttons HoldResume
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Experimental Conference [1..1] Multistream Mode
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
This configuration is used to enable Call Hold and Resume in the OSD. Note that Call Hold and
Resume will be available even if this setting is set to Off, if Multiway is configured.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <Off/On>
Value space: <Off/On>
Off: Call Hold and Resume is not available (unless Multiway is configured).
On: Call Hold/Resume is available while the system is in a call. It will be available on softbuttons,
and when receiving incoming calls the user will have the option of holding any current calls
while accepting the new call.
Example: Experimental Conference 1 Multistream Mode: Off
Experimental Conference [1..1] Multistream InputCount
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change
Example: Experimental CustomSoftbuttons HoldResume: Off
Requires user role: ADMIN
Value space: <1..4>
Example: Experimental Conference 1 Multistream InputCount: 1
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
78
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Experimental CustomSoftbuttons State [1..2] SoftButton [1..5] Type
Password protection
Administrator guide
Appendices
Contact us
Experimental SystemUnit MenuType
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <NotSet/MainSource/PresentationSource/CameraPreset/Actions/
SpeedDial>
Value space: <Indicators/Full>
Example: Experimental SystemUnit MenuType: Full
Example: Experimental CustomSoftbuttons State 1 Softbutton 1 Type: NotSet
Experimental SystemUnit SoftwareUpgrade RequireAuthentication
Experimental CustomSoftbuttons State [1..2] SoftButton [1..5] Value
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <On/Off>
Value space: <S: 0, 255>
Example: Experimental SystemUnit SoftwareUpgrade RequireAuthentication: Off
Example: Experimental CustomSoftbuttons State 1 Softbutton 1 Value: ""
Experimental SystemUnit CrashReporting Mode
Experimental NetworkServices UPnP Mode
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <Off/On>
Value space: <On/Off>
Example: Experimental SystemUnit CrashReporting Mode: Off
Example: Experimental NetworkServices UPnP Mode: Off
Experimental SystemUnit CrashReporting URI
Experimental NetworkServices UPnP Timeout
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Requires user role: ADMIN
Value space: <S: 0, 255>
Value space: <0..3600>
Example: Experimental SystemUnit CrashReporting URI: ""
Example: Experimental NetworkServices UPnP Timeout: 0
Experimental SystemUnit Controller Address
Experimental CTMSSupport Mode
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
This configuration tells whether CTMS (Cisco TelePresence Multipoint Switch) is supported or not.
Value space: <S: 0, 255>
Requires user role: ADMIN
Example: Experimental SystemUnit Controller Address: ""
Value space: <Off/On>
Off: CTMS is not supported.
On: CTMS is supported.
Example: Experimental CTMSSupport Mode: On
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
79
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password
Password protection
protection
Administrator guide
Appendices
Contact us
Chapter 4
Password protection
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
80
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Password protection
The system is password protected in the following ways:
• The System/Codec is password protected. You always need
to enter a username to sign in to the web and command line
interfaces.
You can also configure the system/codec to prompt for a
PIN-code before accessing all the on screen menus.
• The Administrator settings menu can be password protected
with a menu password.
• You can protect the File system of the codec by setting a
password for the root user. The root user is disabled by
default.
Note: We strongly recommend that you set the passwords to
protect your video conference system.
Web interface
Advanced settings
Administrator guide
Password
Password protection
protection
Appendices
Contact us
Changing the system/codec password
The system is delivered with a default user account with
username admin and no password set. This user has full
access rights to the system.
Note: We strongly recommend that you set a password for the
admin user to restrict access to system configuration.
Make sure to keep a copy of the password in a safe place.
You have to contact your Cisco representative if you have
forgotten the admin password.
A user can change his system/codec password using the web
interface or the command line interface.
Changing the password using the web interface
Changing another user’s password
If a password is currently not set, use a blank Current
password; to remove a password, leave the New password
fields blank.
If you have ADMIN rights, you can change all users’ passwords
by performing the following steps:
1.Sign in to the web interface with your username and current
password.
2.Click your username in the upper right corner and select
Change password in the drop down menu.
3.Enter the Current password, the New password, and repeat
the new password in the appropriate input fields.
The password format is a string with 0–64 characters.
4.Click Change password.
1.Sign in to the web interface with your username and
password.
2.Go to the Maintenance tab and select User Administration.
3.Select the appropriate user from the list.
4.Enter a new password and PIN code.
5.Click Save.
You can read more about creating user accounts in the User
administration section.
Changing the password using the command line interface
If a password is currently not set, use a blank current password;
to remove a password, leave the new password entries blank.
1.Connect to the system/codec through the network or the
serial data port, using a command line interface (SSH or
Telnet).
2.Sign in to the codec with your username and current
password.
3.Run the following API command and when prompted enter
the current password, the new password, and confirm the
new password:
systemtools passwd
The password format is a string with 0–64 characters.
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
81
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password
Password protection
protection
Setting the Administrator settings menu password
When starting up the system for the first time the
Administrator Settings menu password is not set.
Note: We strongly recommend that you define a password
to protect the Administrator Settings menu, since these
settings affect the behavior of the video conference system.
When you set a password for the Administrator settings
menu, all users must enter the password to get access to
this menu, either on screen when using the remote control,
or on the touch screen if you are using a Touch controller.
The menu password can be set from the on-screen menu,
using the remote control or from the command line interface;
you neither can use a Touch controller nor the web interface.
Administrator guide
Appendices
Contact us
Setting a root password
Setting the menu password using the remote control
1.In the on screen menu, go to Home > Settings >
Administrator settings > Set menu password.
The password format is a string with 0–255 characters.
To deactivate the password leave the password input field
empty.
2.Enter the menu password in the input field. The password
you enter is hidden; each character is replaced with a star
(*).
On the remote control, press the # key to toggle between
lower or upper case characters and numbers: abc/
ABC/123.
3.Select Save to save the changes, or Cancel to leave
without saving.
4.Press Home ( ) to exit.
If you sign in to the command line interface as root, you can
access the system/codec’s file system.
The root user is disabled by default.
Perform the following steps to activate the root user and set
a password:
1.Connect to the system/codec through the network or the
serial data port, using a command line interface (SSH or
Telnet).
2.Sign in to the system/codec with the username (admin)
and password. You need ADMIN rights.
3.Run the following API command:
systemtools rootsettings on <password>
NOTE: The root password is not the same as the
administrator password.
Setting the menu password from a command line interface
1.Connect to the system through the network or the serial
data port, using a command line interface (SSH or Telnet).
2.Type the following command:
xCommand SystemUnit MenuPassword Set
Password: <password>
The password format is a string with 0–255 characters.
To deactivate the password leave the password field
empty.
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
82
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Appendices
Contact us
Chapter 5
Appendices
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
83
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Administrator guide
Password protection
Connecting the Cisco TelePresence
Touch 8” controller
Appendices
Appendices
Contact us
Option A: To LAN socket (Ethernet)
A C Series codec running software version TC4.1 or later can be
controlled using the Cisco TelePresence Touch 8” controller (as
alternative to the remote control).
Option B: To codec 2nd Ethernet connector
Power
adapter
To power socket
Codec address
Connecting the Touch controller
Touch controller set-up
There are two options how to connect the Touch controller to
the codec. In both cases the connection is via the provided
power adapter, as illustrated above.
Once the Touch controller is connected to power, the set-up
procedure begins. Follow the instructions on screen.
A.Connecting the Touch controller to the codec via LAN.
The process of associating the Touch controller to the
codec is called paring. Note that the codec is signalling
that it is available for pairing for only 30 minutes after it is
switched on.
B.Connecting the Touch controller directly to the codec’s
second Ethernet connector (Network Port 2).
To enable this mode of operation use the remote control
and navigate to Home > Settings > Administrator settings >
Pairing > Direct pairing and select On.
Alternatively, use the web interface or the command line
interface to set the NetworkPort 2 > Mode setting to
DirectPairing.
Restart the codec for the change to take effect.
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
84
If you have connected the unit to the codec via LAN, you
have to select which codec to pair with. If the codec is
not in the list of available codecs displayed on the Touch
controller, you can select a codec manually by entering its
IP address.
If the Touch controller needs software upgrade, new software
will be downloaded from the codec and installed on the unit
automatically as part of the set-up procedure. The Touch
controller restarts after the upgrade.
You can verify that the Touch controller is successfully paired
to the codec by checking that the codec address is displayed
in the top banner.
If you want more details on Touch installation, please read the
Cisco TelePresence Touch 8 inch Installation Guide, which is
available on the Cisco web site.
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
About monitors when you have a
Codec C60
Web interface
Advanced settings
Administrator guide
Password protection
Appendices
Appendices
Contact us
The video outputs at Codec C60
The main monitor
The monitor can be connected to any of the video outputs
HDMI 1 (the default connector for the main monitor) or DVI-I 2.
Connecting to HDMI 1
The HDMI 1 output is, by default, defined as the main monitor
connector. When you connect the main monitor to this output
the menu and icons (OSD - on screen display) will show on this
monitor.
DVI-I 2
HDMI 1
(the default connector for
the main monitor)
Connecting to DVI-I 2
When connecting the main monitor to the DVI–I 2 output, you
must move the OSD to this output.
If you cannot see any menu on screen you must run a key
sequence on the remote control. The menu on screen, icons
and other information (OSD - on screen display) will be moved
to the selected output. At the same time, the resolution will be
set to the default value, which is 1024x768@60Hz for DVI (and
1280x720@60Hz for HDMI).
Moving the OSD using the web interface
Dual monitors
Go to the Advanced Configuration page and navigate to
Video > OSD > Output and select the video output connector for
the main mointor.
When you want to run a dual monitor setup, connect the second
monitor to video output DVI-I 2 video output on codec.
Moving the OSD using the remote control
Moving the OSD using API commands
If the main monitor is connected to DVI-I 2 video output, and the
OSD is on HDMI 1 output, you must run the following shortcut or
key sequence on the remote control.
You can also set the resolution and the OSD output by setting
up a serial port connection and run API commands. See the API
Guide for the codec for information about API commands.
• Disconnect * # * # 0 x #
x=1 (HDMI 1) x=2 (DVI–I 2)
Dual monitor configuration
Go to Advanced configuration (menu on screen or web
interface) to set the monitor to dual:
1.Navigate to Video > Output > Monitor and set the Monitor to
Dual.
Example: Set DVI-I 2 as the OSD output:
–*–#–*–#–0–2–#
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
85
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
About monitors when you have a
Codec C40
Web interface
Advanced settings
Administrator guide
Password protection
Appendices
Appendices
Contact us
The video outputs at Codec C40
The main monitor
The monitor can be connected to any of the video outputs
HDMI 1 (the default connector for the main monitor) or DVI-I 2.
Connecting to HDMI 1
The HDMI 1 output is, by default, defined as the main monitor
connector. When you connect the main monitor to this output
the menu and icons (OSD - on screen display) will show on this
monitor.
DVI-I 2
HDMI 1
(the default connector for
the main monitor)
Connecting to DVI-I 2
When connecting the main monitor to the DVI–I 2 output, you
must move the OSD to this output.
If you cannot see any menu on screen you must run a key
sequence on the remote control. The menu on screen, icons
and other information (OSD - on screen display) will be moved
to the selected output. At the same time, the resolution will be
set to the default value, which is 1024×768@60Hz for DVI (and
1280×720@60Hz for HDMI).
Moving the OSD using the web interface
Dual monitors
Go to the Advanced Configuration page and navigate to
Video > OSD > Output and select the video output connector for
the main mointor.
When you want to run a dual monitor setup, connect the second
monitor to video output DVI-I 2 video output on codec.
Moving the OSD using the remote control
Moving the OSD using API commands
If the main monitor is connected to DVI-I 2 video output, and the
OSD is on HDMI 1 output, you must run the following shortcut or
key sequence on the remote control.
You can also set the resolution and the OSD output by setting
up a serial port connection and run API commands. See the API
Guide for the codec for information about API commands.
• Disconnect * # * # 0 x #
x=1 (HDMI 1) x=2 (DVI–I 2)
Dual monitor configuration
Go to Advanced configuration (menu on screen or web
interface) to set the monitor to dual:
1.Navigate to Video > Output > Monitor and set the Monitor to
Dual.
Example: Set DVI-I 2 as the OSD output:
–*–#–*–#–0–2–#
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
86
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
TC console
The term ‘layouts’ can be used to describe the various ways
a video conversation appear on screen. Different types of
meetings would require different layouts.
Web interface
Advanced settings
Administrator guide
Password protection
Video compositor
Appendices
Appendices
Contact us
Audio console
The TC Console tool lets you customize different parts of the
Codecs C90, C60 and C40 by use of simple drag and drop
technique.
It will let you create setup profiles that can be applied to the
codec at a later time or you can configure the system in real
time without having to program the codec.
Read more about the TC Console functionality in the
TC Console user guide.
The Video compositor allows you to modify the default video
compositing behavior of the codec without the need for any
programming.
You can add new layouts, change the automatically
selected layouts and control what will be shown to the
users depending on the state of the codec. A layout is a
composition of one or more frames, typically differing in size.
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
87
The Audio console helps you configure the audio system
of the codec. It will allow you to change the default mixing,
routing and equalization as well as allow you to set various
input and output connector properties.
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Administrator guide
Password protection
Advanced settings
Appendices
Appendices
Contact us
Optimal definition profiles
Under ideal lighting conditions the bandwidth (call rate)
requirements can be substantially reduced.
The optimal definition profile should reflect the lighting
conditions in your room and the quality of the video input
(camera); the better the lighting conditions and video input, the
higher the profile. Then, in good lighting conditions, the video
encoder will provide better quality (higher resolution or frame
rate) for a given call rate.
In general, we recommend the optimal definition profile set to
Normal. However, if lighting conditions are good we recommend
that you test the endpoint on the various Optimal Definition
Profile settings before deciding on a profile.
High
Medium
Normal
Go to Advanced Configuration on the web interface and
navigate to Video > Input > Source [1..n] > OptimalDefinition >
Profile to select the preferred optimal definition profile.
Typically used in dedicated video
conferencing rooms. Requires very good
lighting conditions and a good quality
video input to achieve a good overall
experience.
Typically used in rooms with good and
stable lighting conditions and a good
quality video input.
This setting is typically used in office
environments where the room is normally to
poorly lit.
You can set a resolution threshold below which the maximum
frame rate will be 30 fps.
Under ideal conditions the bandwidth
requirements can be reduced by up to
50% compared to Normal.
Go to Advanced Configuration on the web interface and
navigate to Video > Input > Source [1..n] > OptimalDefinition >
Threshold60fps to set the threshold.
Typical resolutions used for different optimal definition profiles, call rates and frame rates
The video input quality settings must be set to Motion for the
optimal definition settings to take any effect. With the video input
quality set to Sharpness, the endpoint will transmit the highest
resolution possible, regardless of frame rate.
Frame
rate
Go to Advanced Configuration on the web interface and
navigate to Video > Input > Source [1..n] > Quality to set the
video quality parameter to Motion.
30 fps
You can read more about the video settings in the Advanced
settings chapter.
60 fps
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
The bandwidth requirements can be
reduced by up to 25% compared to
Normal.
Optimal
Definition
Profile
256 kbps
768 kbps
1152 kbps 1472 kbps 2560 kbps
Normal
512 × 288
1024 × 576
1280 × 720
1280 × 720 1920 × 1080 1920 × 1080 1920 × 1080
1280 × 720 1920 × 1080 1920 × 1080 1920 × 1080
Call rate
4 Mbps
6 Mbps
Medium
640 × 360
1280 × 720
1280 × 720
High
768 × 448
1280 × 720
1280 × 720 1920 × 1080 1920 × 1080 1920 × 1080 1920 × 1080
Normal
256 × 144
512 × 288
768 × 448
1024 × 576
1280 × 720
1280 × 720
1280 × 720
Medium
256 × 144
768 × 448
1024 × 576
1024 × 576
1280 × 720
1280 × 720
1280 × 720
High
512 × 288
1024 × 576
1280 × 720
1280 × 720
1280 × 720
1280 × 720
1280 × 720
88
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Appendices
Contact us
ClearPath — Packet loss resilience
ClearPath introduces advanced packet loss resilience
mechanisms that increase the experienced quality when you
use your video system in an error prone environment.
We recommend that you enable ClearPath on your video
system.
Go to Advanced configuration (menu on screen or web
interface) to switch on ClearPath:
• Navigate to Conference 1 > PacketLossResilience > Mode
and select On.
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
89
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Appendices
Contact us
Requirements for speaker systems
connected to a Cisco TelePresence
C Series codec
Cisco has put in a lot of effort to minimize the camera to screen
delay on our TelePresence endpoints.
New consumer TVs are usually equipped with “Motion Flow” or
similar technology to insert new video frames between standard
frames to create smoother images. This processing takes time
and to maintain lip synchronization, the TV will delay the audio
so that the audio and video arrives at the same time.
The echo canceller in the Cisco endpoints can handle such
delay up to 30 ms. Many consumer TVs are not made for real
time video communication and may introduce more than 30 ms
of delay.
If you use such a TV together with a C Series codec it is
recommended that you turn off “Motion Flow”, “Natural Motion”
or any other video processing that introduces additional delay.
Some consumer TVs also support advanced audio processing
like “Virtual Surround” effects and “Dynamic Compression” to
improve the TV experience. Such processing will make any
acoustic echo canceller malfunction and should hence be
switched off.
Some monitors are equipped with a setting called ‘Game Mode’.
This mode is specifically designed to help reduce the response
time and will usually help to reduce the delay.
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
90
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
DNAM for
Profile 42”/52”/55”
Web interface
Password protection
Advanced settings
Administrator guide
Appendices
Appendices
Contact us
The DNAM Amplifier
DNAM Loudspeaker
• 3 × 50 W continuous average Center Output
Power (load specified by DNAM Center
Loudspeakers)
The DNAM – Digital Natural Audio Module – is
built on two specially designed and separate
modules, the amplifier and the loudspeaker
cabinet.
• 2 × 50 W continuous average Stereo Output
Power (load specified by DNAM Stereo
Loudspeakers)
• Full dynamic range for audio (20 Hz–20 kHz)
• Digital Signal Processing and Filtering on all
channels for best audio detail clarity
The DNAM Loudspeaker
• 3-way Center Loudspeaker system
• Digital Crossover Filtering on center
channels
• Frequency range 50 Hz - 20 kHz
• 2 × 100 mm low- and midrange
loudspeaker 8 Ohms nominal, excellent
quality (SEAS Prestige series)
• In/out:
• Audio In - SPDIF (stereo) or Analog
(mono), using the same connector.
• 1 × 25 mm dome tweeter, 6 ohms nominal,
excellent quality
• Active crossover filtered audio signals
received from DNAM amplifier
• Long time max power 70 Watt on all
loudspeakers
• Audio Loop Out - line out directly from
the input, always analog even with
SPDIF in.
DNAM Amplifier
Power socket
Fuse
• Enclosed MDF loudspeaker cabinet
• Audio Stereo Out - male XLR, common
GND configuration
• Loudspeaker Out - female D-SUB 15p
Integrated Left / Right Stereo Loudspeaker
• Fuse 2 A 250 V Slow, 5 × 20 mm, Littelfuse
type 215002. Push and twist anti-clockvice
to release.
Stereo Loudspeaker System, each side has:
• 1 × 90 mm fullrange loudspeaker, 8 Ohms
nominal, excellent quality
• Frequency range 70 Hz - 20 kHz
• Enclosed MDF Loudspeaker cabinet
• Audio Differential In - female XLR
pinout: 1 - GND, 2 – Signal (+), 3 –
Signal (-)
Loudspeaker Out
(D-SUB)
Audio In
(RCA)
Audio Stereo Out (XLR)
Audio Loop Out
(RCA)
Audio Differential In (XLR)
Note: Some DNAM amplifier models are delivered without XLR connectors,
and with a different RCA connector placement.
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
91
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
DNAM for Profile 65”
Web interface
Advanced settings
Password protection
• 2 × 50 W continuous average Stereo Output
Power (load specified by Loudspeaker
Stereo Kit)
• Full dynamic range for audio (high fidelity
range) or Integrated stereo speakers
• 3-way Center Speaker system
• Digital Signal Processing and Filtering on all
channels for best audio detail clarity
• Frequency range 50 Hz - 20 kHz
• Crossover filtered audio signals received
from DNAM amplifier
• Long time max power 70 Watt on all
loudspeakers
• Enclosed MDF speaker cabinet
Contact us
• 3 × 50 W continuous average Center Output
Power (load specified by DNAM Center
Speakers)
The DNAM Loudspeaker
• 1 × 25 mm dome tweeter, 6 ohms nominal,
excellent quality
Appendices
Appendices
The DNAM Amplifier
DNAM Loudspeaker
The DNAM (Digital Natural Audio Module) used
in Profile 65”, is built on two specially designed
and separate modules, which is the amplifier
and the loudspeaker cabinet.
• 2 × 100 mm low- and midrange
loudspeakers, 8 ohms nominal, reference
quality (SEAS Excel series)
Administrator guide
• Digital Crossover Filtering on center
channels
DNAM Amplifier
Loudspeaker Out
(D-SUB)
• In/out:
• Audio In - SPDIF (stereo) or Analog
(mono), using the same connector
• Audio Loop Out - line out directly from
the input, always analog even with
SPDIF in
Audio In (RCA)
Audio Loop Out (RCA)
Audio Differential In (XLR)
Power socket
Audio Stereo Out (XLR)
• Audio Differential In - female XLR
pinout: 1 - GND, 2 – Signal (+), 3 –
Signal (-)
• Audio Stereo Out - male XLR, common
GND configuration
Integrated Stereo Speaker
2-way Stereo Speaker System, each side has:
• Loudspeaker Out - female D-SUB 15p
• 1 × 100 mm low- and midrange
loudspeaker, 8 ohms nominal, reference
quality (SEAS Excel series)
• Fuse 2 A 250 V Slow, 5 × 20 mm, Littelfuse
type 215002
• 1 × 25 mm dome tweeter, 6 ohms nominal,
excellent quality
• Passive crossover filter
• Frequency range 70 Hz - 20 kHz
• Long time max power 70 Watt
• Enclosed MDF speaker cabinet
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
Fuses
92
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Appendices
Contact us
Technical specifications
Codec C60/C40
UNIT DELIVERED COMPLETE WITH:
Video conferencing codec, wireless remote control,
rack mounting rails (C60), rack mounting ears (C40),
LAN cable, power cable
BANDWIDTH
H.323/SIP up to 6 Mbps point-to-point
FIREWALL TRAVERSAL
Cisco TelePresence Expressway technology
H.460.18, H.460.19 firewall traversal
VIDEO STANDARDS
H.261, H.263, H.263+, H.264
VIDEO FEATURES
Native 16:9 widescreen
Advanced screen layouts
Intelligent video management
Local auto layout
7 embedded individual video compositors — 1 for every
output and 1 for every encoder (C60 only) **
VIDEO INPUTS (5 INPUTS (C60) / 4 INPUTS (C40))
Two HDMI inputs; supported formats:
1920 × 1080@60, 59.94 Hz (1080p60)
1920 × 1080@50 Hz (1080p50)
1920 × 1080@30, 29.97 Hz (1080p30)
1920 × 1080@25 Hz (1080p25)
1920 × 1080@24, 23.97 Hz (1080p24)
1280 × 720@60, 59.94 Hz (720p60)
1280 × 720@50 Hz (720p50)
720 × 480@60, 59.94 Hz (480p60)
640 × 480@60 Hz (480p60)
1600 × 1200@50, 60 Hz (UXGA)
1280 × 1024@60, 75 Hz (SXGA)
1024 × 768@60, 70, 75, 85 Hz (XGA)
800 × 600@56, 60, 72, 75, 85 Hz (SVGA)
1920 × 1200@50, 60 Hz (WUXGA)
1680 × 1050@60 Hz (WSXGA+)
1440 × 900@60 Hz (WXGA+)
1280 × 768@60 Hz (WXGA)
Two (C60), one (C40) × DVI-I inputs; supported
formats:
One composite output (BNC connector) (C60
only):
AUDIO INPUTS (7 INPUTS (C60), 5 INPUTS
(C40))
Analog (VGA):
1920 × 1080@60 Hz (1080p60)
1280 × 720@60 Hz (720p60)
1600 × 1200@60 Hz (UXGA)
1280 × 1024@60, 75 Hz (SXGA)
1280 × 960@60 Hz
1024 × 768@60, 70, 75, 85 Hz (XGA)
1920 × 1200@50 Hz (WUXGA)
1680 × 1050@60 Hz (WSXGA+)
1440 × 900@60 Hz (WXGA+)
1280 × 800@60 Hz (WXGA)
1280 × 768@60 Hz (WXGA)
PAL/NTSC
Four microphones (C60) / two microphones (C40),
48 V phantom powered, XLR connector, each with
separate echo cancellers and noise reduction; all
microphones can be set for balanced line level
Two RCA/Phono inputs, line level: Stereo PC input,
configurable to two RCA/Phono inputs, line level: Mono
auxiliary/DVD input
One HDMI input, digital, stereo PC/DVD inputs
LIVE VIDEO RESOLUTIONS (ENCODE/DECODE)
176 × 144@30 fps (QCIF)
352 × 288@30 fps (CIF)
512 × 288@30 fps (w288p)
576 × 448@30 fps (448p)
768 × 448@30 fps (w448p)
704 × 576@30 fps (4CIF)
1024 × 576@30 fps (w576p)
1280 × 720@30 fps (720p30)
1920 × 1080@30 fps (1080p30)*
640 × 480@30 fps (VGA)
800 × 600@30 fps (SVGA)
1024 × 768@30 fps (XGA)
1280 × 1024@30 fps (SXGA) (C60 only)
1280 × 768@30 fps (WXGA)
1440 × 900@30 fps (WXGA+)* (C60 only)
1680 × 1050@30 fps (WSXGA+)* (C60 only)
1600 × 1200@30 fps (UXGA)* (C60 only)
1920 × 1200@25fps (WUXGA)* (C60 only)
512 × 288@60 fps (w288p60)*
768 × 448@60 fps (w448p60)*
1024 × 576@60 fps (w576p60)*
1280 × 720@60 fps (720p60)*
Analog (YPbPr):
1920 × 1080@60 Hz (1080p60)
1920 × 1080@50 Hz (1080p50)
1920 × 1080@30 Hz (1080p30)
1920 × 1080@25 Hz (1080p25)
1280 × 720@60 Hz (720p60)
1280 × 720@50 Hz (720p50)
1280 × 720@30 Hz (720p30)
720 × 576@50 Hz (576p50)
720 × 480@60 Hz (480p60)
Digital (DVI-D):
Same as HDMI, ref. above.
One S-video/Composite input (BNC connector):
PAL/NTSC
Extended Display Identification Data (EDID)
720p30 from 768kbps
720p60 from 1152kbps*
1080p30 from 1472 kbps*
VIDEO OUTPUTS (3 OUTPUTS (C60) /
2 OUTPUTS (C40))
AUDIO STANDARDS
One HDMI output, one DVI-I output; supported
formats:
G.711, G.722, G.722.1, 64 kbps and 128 kbps MPEG4
AAC-LD, AAC-LD stereo
1920 × 1080@60 Hz (1080p60)
1280 × 720@60 Hz (720p60)
1600 × 1200@60 Hz (UXGA)
1280 × 1024@60 Hz (SXGA)
1024 × 768@60 Hz (XGA)
800 × 600@60 Hz (SVGA)
640 × 480@60 Hz (VGA)
1920 × 1200@60Hz (WUXGA)
1360 × 768@60 Hz
1366 × 768@60 Hz
1280 × 768@60 Hz (WXGA)
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
VESA Monitor Power Management
Extended Display Identification Data (EDID)
AUDIO FEATURES
CD-quality 20 kHz mono and stereo
Four (C60) / Two (C40) separate acoustic echo
cancellers
4-port (C60) / 2-port (C40) audio mixer
Automatic Gain Control (AGC)
Automatic noise reduction
Active lip synchronization
93
AUDIO OUTPUTS (3 OUTPUTS)
Two RCA/Phono outputs, line level, stereo main audio,
configurable to S/PDIF or two RCA/Phono outputs, line
level, mono to recording device
One HDMI output, digital, stereo main audio
DUAL STREAM
H.239 (H.323) dual stream
BFCP (SIP) dual stream
Support for resolutions up to 1080p30/WUXGA
(C60) / WXGAp30 (C40), independent of main stream
resolution
Multipoint support
Four-way embedded SIP/H.323 MultiPoint, reference
MultiSite
Cisco TelePresence Multiway support (requires Cisco
TelePresence Video Communication Server [Cisco
VCS] and Cisco TelePresence MCU)
Ability to natively join multipoint conferences hosted on
Cisco Telepresence Multipoint Switch (CTMS)
MULTISITE FEATURES*
(embedeed multipoint switch)
Four-way SIP/H.323 MultiSite. Resolution up to
720p30 (C60) / w576p30 (C40)
Full individual audio and video transcoding
Individual layouts in multisite continuous presence
(takes out selfview)
H.323/SIP/VoIP in the same conference
Support for Presentation (H.239/BFCP) from any
participant at resolutions up to WXGAp30 (C60) /
WXGAp30 (C40)
Best Impression (automatic continuous presence
layouts)
H.264, encryption, and dual stream from any site
Dial in and dial out
Additional telephone call (no license required)
Conference rates up to 10 Mbps
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Appendices
Contact us
Codec C60/C40, continued...
PROTOCOLS
SECURITY FEATURES
SYSTEM MANAGEMENT
APPROVALS
H.323
SIP
Management through HTTPS and SSH
IP administration password
Menu administration password
Disable IP services
Network settings protection
Support for the Cisco TelePresence Management Suite
(Cisco TMS)
Total management through embedded SNMP, Telnet,
SSH, XML, SOAP
Remote software upload through web server, SCP,
HTTP, HTTPS
One RS-232 for local control and diagnostics
Remote control and on-screen menu system
EU/EEC
DIRECTORY SERVICES
USA
EMBEDDED ENCRYPTION
H.323/SIP point-to-point
Standards-based: H.235 v3 and Advanced Encryption
Standard (AES)
Automatic key generation and exchange
Supported in Dual Stream
IP NETWORK FEATURES
DNS lookup for service configuration
Differentiated Services (QoS)
IP adaptive bandwidth management (including flow
control)
Auto gatekeeper discovery
Dynamic playout and lip-sync buffering
H.245 DTMF tones in H.323
Date and time support via NTP
Packet loss based downspeeding
URI Dialing
TCP/IP
DHCP
802.1x Network authentication
802.1Q Virtual LAN
802.1p QoS and class of service
ClearPath
IPV6 NETWORK support
Single call stack support for both H323 and SIP
Dual-stack IPv4 and IPv6 for DHCP, SSH, HTTP,
HTTPS, DNS, DiffServ
Support for both static and autoconfiguration (stateless
address autoconfiguration)
Cisco unified communications manager
(requires Cisco UCM version 8.6 or later)
Native registration with Cisco Unified Communications
Manager
Basic Cisco Unified Communications Manager
provisioning
Firmware upgrade from Cisco Unified Communications
Manager
Cisco Discovery Protocol and DHCP option 150
support
Basic telephony features such as hold, resume,
transfer, and corporate directory lookup
NETWORK INTERFACES
One LAN/Ethernet (RJ-45) 10/100/1000 Mbit
One LAN/Ethernet (RJ-45) interface to be used for the
Cisco TelePresence Touch for C-series user interface
device only
OTHER INTERFACES
USB host for future usage (C60 only)
USB device for future usage
GPIO – General purpose input/output (C60 only)
PRECISIONHD 1080P CAMERA
1/3” CMOS
12 × zoom (C60)
12 × zoom / 4 × zoom (C40)
+15°/-25° tilt, +/- 90° pan
43.5° vertical field of view
72° horizontal field of view
Focus distance 0.3 m–infinity
1920 × 1080 pixels progressive @ 60fps
(12 × zoom version)
1920 × 1080 pixels progressive @ 30fps
(4 × zoom version)
Other formats supported (configurable through dipswitch):
1920 × 1080@60 Hz (HDMI only)***
1920 × 1080@50 Hz (HDMI only)***
1920 × 1080@30 Hz
1920 × 1080@25 Hz
1280 × 720@60 Hz***
1280 × 720@50 Hz ***
1280 × 720@30 Hz
1280 × 720@25 Hz
Automatic or manual focus/brightness/white balance
Far-end camera control
Daisy-chain support (Visca protocol camera)***
Dual HDMI and HD-SDI outputs
Upside-down mounting with automatic flipping of
picture
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
Support for local directories (My Contacts)
Corporate directory
Unlimited entries using server directory supporting
LDAP and H.350 (requires Cisco TMS)
Unlimited number for corporate directory (through
Cisco TMS)
Received calls with date and time
Placed calls with date and time
Missed calls with date and time
Directive 2006/95/EC (Low Voltage Directive)
– Standard EN 60950-1
Directive 2004/108/EC (EMC Directive)
– Standard EN 55022, Class B
– Standard EN 55024
– Standard EN 61000-3-2/-3-3
Approved according to UL 60950-1
Complies with FCC15B Class B
Canada
Approved according to CAN/CSA C22.2 No. 60950-1
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à
la norme NMB-003 du Canada.
POWER
Auto-sensing power supply
100-120/200-240 VAC, 60/50 Hz
175 watts max for codec and main camera
OPERATING TEMPERATURE AND HUMIDITY
0° C to 35° C (32° F to 95° F) ambient temperature
10% to 90% relative humidity (RH)
STORAGE AND TRANSPORT TEMPERATURE
MTBF PRODUCT RELIABILITY/MTBF
The predicted reliability is expressed in the expected
random Mean Time Between Failures (MTBF) for the
electronic components based on the Power On Hours:
Power On Hours (POH) > 69 000 hours
Useful Life Cycle > 6 years
ISO 9001 certificate is available upon request
-20° C to 60° C (-4° F to 140° F) at RH 10–90%
(non-condensing)
DIMENSIONS
Length: 17.4 in. / 44.2 cm
Height: 1.7 in. / 4.4 cm
Depth: 10.9 in. / 27.8 cm
Weight: 8.8 lbs / 4 kg
* Requires option
** Multiwindow compositing not supported on the dual stream
*** Not supported on 4 x zoom camera
All specifications are subject to change without notice, system specifics may vary.
All images in these materials are for representational purposes only, actual products may differ.
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other
countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks
mentioned are the property of their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company.
November 2011
94
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Appendices
Contact us
Profile 52”/55” using C60
UNIT DELIVERED COMPLETE WITH:
AUDIO OUTPUTS (3 OUTPUTS)
POWER
APPROVALS
Full HD LCD display, Codec C60, Touch 8” user
interface device, remote control, PrecisionHD Camera
(1080p), microphone (3x with single screen, 4x with
dual screen), Digital Audio Module, integrated speakers
and integrated cabling.
Choice of installation configuration: floor stand, wheel
base or wall mount on pedestal.
Choice of screen size and configuration.
The same as Codec C60
Profile 52’’ / 52” Dual
EU/EEC
DUAL STREAM
The same as Codec C60
Auto-sensing power supply
100-120/200-240 VAC, 60/50 Hz, 6 A max
175 W max for codec and main camera
Maximum power rating complete system,
526 W (52”) / 870 W (52” Dual)
MONITOR available with:
MULTISITE FEATURES*
Profile 55’’ / 55” Dual
The same as Codec C60
Auto-sensing power supply
100-120/200-240 VAC, 60/50 Hz,
4.5 A max (55”) / 8 A (55” Dual)
175 W max for codec and main camera
Maximum power rating complete system,
350 W (55”) / 550 W (55” Dual)
The display complies with ENERGY STAR requirements
Directive 2006/95/EC (Low Voltage Directive)
– Standard EN60950-1, 2nd ed.
Directive 2004/108/EC (EMC Directive)
– Standard EN55022, Class A
– Standard EN55024
– Standard EN61000-3-2/-3-3
Warning: This is a class A product. In a domestic
environment this product may cause radio interference
in which case the user may be required to take
adequate measures.
52”/55’’ Full HD LCD, 16:9, 1080 × 1920 resolution
BASE available with:
Floor standing foot plate
Wheel base (not available on 52” Dual / 55” Dual)
Wall mount on pedestal
BANDWIDTH
The same as Codec C60
FIREWALL TRAVERSAL
The same as Codec C60
Multipoint support
PROTOCOLS
The same as Codec C60
EMBEDDED ENCRYPTION
The same as Codec C60
IP NETWORK FEATURES
The same as Codec C60
VIDEO STANDARDS
Cisco unified communications manager
VIDEO FEATURES
The same as Codec C60
VIDEO INPUTS (5 INPUTS)
SECURITY FEATURES
DIMENSIONS
The same as Codec C60
Profile 52’’
NETWORK INTERFACES
Height: 63.78 in. / 162 cm
Width: 47.25 in. / 120 cm
Depth: 6.7 in. / 17 cm (without footplate)
Weight: 253.5 lbs / 115 kg (with floor standing
footplate)
229.3 lbs / 104 kg (with wheel base)
The same as Codec C60
VIDEO OUTPUTS (3 OUTPUTS)
OTHER INTERFACES
LIVE VIDEO RESOLUTIONS (ENCODE/DECODE)
The same as Codec C60
PRECISIONHD 1080P CAMERA
The same as Codec C60
The same as Codec C60
AUDIO STANDARDS
SYSTEM MANAGEMENT
The same as Codec C60
AUDIO FEATURES
The same as Codec C60
AUDIO INPUTS (7 INPUTS)
STORAGE AND TRANSPORT TEMPERATURE
-20° C to 60° C (-4° F to 140° F) at RH 10–90%
(non-condensing)
The same as Codec C60
The same as Codec C60
The same as Codec C60
0° C to 35° C (32° F to 95° F) ambient temperature
10% to 90% relative humidity (RH)
IPV6 NETWORK support
The same as Codec C60
The same as Codec C60
OPERATING TEMPERATURE AND HUMIDITY
The same as Codec C60
Profile 52’’ Dual
DIRECTORY SERVICES
Height: 63.8 in. / 162 cm
Width: 94.5 in. / 240 cm
Depth: 6.7 in. / 17 cm (without footplate)
Weight: 515.9 lbs / 234 kg (with floor standing
footplate)
The same as Codec C60
Profile 55’’
* Requires option
Height: 64.6 in. / 164 cm
Width: 49.6 in. / 126 cm
Depth: 6.7 in. / 17 cm (without footplate)
Weight: 245 lbs / 111 kg (with floor standing footplate)
225lbs / 102 kg (with wheel base)
The same as Codec C60, as well as
Cisco TelePresence Touch 8” user interface device
The same as Codec C60
All specifications are subject to change without notice, system specifics may vary.
All images in these materials are for representational purposes only, actual products may differ.
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other
countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks
mentioned are the property of their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company.
November 2011
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
USA
Approved according to UL60950-1 2nd ed.
Complies with FCC15B Class A
Note: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications. Operation of
this equipment in a residential area is likely to cause
harmful interference in which case the user will
be required to correct the interference at his own
expense.
Canada
Approved according to CAN/ CSA-C22.2 No. 60950-1
This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe A est conforme à
la norme NMB-003 du Canada.
MTBF PRODUCT RELIABILITY/MTBF
The predicted reliability is expressed in the expected
random Mean Time Between Failures (MTBF) for the
electronic components based on the Power On Hours:
Power On Hours (POH) > 69 000 hours
Useful Life Cycle > 6 years
ISO 9001 certificate is available upon request
Profile 55’’ Dual
Height: 64.6 in. / 164 cm
Width: 99.2 in. / 252 cm
Depth: 6.7 in. / 17 cm (without footplate)
Weight: 443 lbs / 201 kg (with floor standing footplate)
95
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Appendices
Contact us
Profile 65” using C60
UNIT DELIVERED COMPLETE WITH:
DUAL STREAM
POWER
APPROVALS
Full HD LCD display, Codec C60, Touch 8” user
interface device, remote control, PrecisionHD 1080p
Camera, microphones, Digital Audio Module, integrated
speakers and integrated cabling.
The same as Codec C60
Auto-sensing power supply
100-120/200-240 VAC, 60/50 Hz
175 W max for codec and main camera
Maximum power rating complete system, 650 W
EU/EEC
MONITOR available with:
65’’ Full HD LCD, 16:9, 1080 × 1920 resolution
BASE available with:
Floor standing footplate
Wall mount on pedestal
BANDWIDTH
The same as Codec C60
FIREWALL TRAVERSAL
The same as Codec C60
VIDEO STANDARDS
The same as Codec C60
VIDEO FEATURES
The same as Codec C60
VIDEO INPUTS (5 INPUTS)
The same as Codec C60
VIDEO OUTPUTS (3 OUTPUTS)
The same as Codec C60
LIVE VIDEO RESOLUTIONS (ENCODE/DECODE)
The same as Codec C60
AUDIO STANDARDS
The same as Codec C60
AUDIO FEATURES
The same as Codec C60
AUDIO INPUTS (7 INPUTS)
The same as Codec C60
Multipoint support
The same as Codec C60
MULTISITE FEATURES*
-20° C to 60° C (-4° F to 140° F) at RH 10–90%
(non-condensing)
Directive 2006/95/EC (Low Voltage Directive)
– Standard EN 60950-1
Directive 2004/108/EC (EMC Directive)
– Standard EN 55022, Class A
– Standard EN 55024
– Standard EN 61000-3-2/-3-3
Warning: This is a class A product. In a domestic
environment this product may cause radio interference
in which case the user may be required to take
adequate measures.
DIMENSIONS
USA
OPERATING TEMPERATURE AND HUMIDITY
The same as Codec C60
0° C to 35° C (32° F to 95° F) ambient temperature
10% to 90% relative humidity (RH)
PROTOCOLS
The same as Codec C60
STORAGE AND TRANSPORT TEMPERATURE
EMBEDDED ENCRYPTION
The same as Codec C60
IP NETWORK FEATURES
Height: 65 in. / 165 cm
Width: 59.1 in. / 150 cm
Depth: 5.9 in. / 15 cm
Weight: 330 lbs / 150 kg (with floor standing footplate)
The same as Codec C60
IPV6 NETWORK support
The same as Codec C60
Cisco unified communications manager
The same as Codec C60
SECURITY FEATURES
The same as Codec C60
NETWORK INTERFACES
The same as Codec C60
OTHER INTERFACES
The same as Codec C60
Approved according to UL 60950-1
Complies with FCC15B Class A
Note: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications. Operation of
this equipment in a residential area is likely to cause
harmful interference in which case the user will
be required to correct the interference at his own
expense.
Canada
PRECISIONHD 1080P CAMERA
Approved according to CAN/ CSA-C22.2 No. 60950-1
This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe A est conforme à
la norme NMB-003 du Canada.
The same as Codec C60
SYSTEM MANAGEMENT
The same as Codec C60, as well as
Cisco TelePresence Touch 8” user interface device
DIRECTORY SERVICES
MTBF PRODUCT RELIABILITY/MTBF
The same as Codec C60
The predicted reliability is expressed in the expected
random Mean Time Between Failures (MTBF) for the
electronic components based on the Power On Hours:
Power On Hours (POH) > 69 000 hours
Useful Life Cycle > 6 years
AUDIO OUTPUTS (3 OUTPUTS)
The same as Codec C60
* Requires option
ISO 9001 certificate is available upon request
All specifications are subject to change without notice, system specifics may vary.
All images in these materials are for representational purposes only, actual products may differ.
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other
countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks
mentioned are the property of their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company.
November 2011
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
96
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Appendices
Contact us
Profile 42”/52”/55” using C40
UNIT DELIVERED COMPLETE WITH:
AUDIO OUTPUTS (3 OUTPUTS)
POWER
APPROVALS
Full HD LCD display, Codec C40, Touch 8” user
interface device, remote control, PrecisionHD Camera
(1080p), microphones (2x), Digital Audio Module,
integrated speakers and integrated cabling.
Choice of installation configuration: floor stand, wheel
base or wall mount on pedestal.
The same as Codec C40
Profile 42’’
EU/EEC
DUAL STREAM
Auto-sensing power supply
100-120/200-240 VAC, 60/50 Hz, 6 A max
175 W max for codec and main camera
Maximum power rating complete system 365 W
Auto-sensing power supply
100-120/200-240 VAC, 60/50 Hz, 6 A max
175 W max for codec and main camera
Maximum power rating complete system 526 W
Directive 2006/95/EC (Low Voltage Directive)
– Standard EN60950-1, 2nd ed.
Directive 2004/108/EC (EMC Directive)
– Standard EN55022, Class A
– Standard EN55024
– Standard EN61000-3-2/-3-3
Warning: This is a class A product. In a domestic
environment this product may cause radio interference
in which case the user may be required to take
adequate measures.
Profile 55’’
USA
Auto-sensing power supply
100-120/200-240 VAC, 60/50 Hz, 4.5 A max
175 W max for codec and main camera
Maximum power rating complete system, 350 W
The display complies with ENERGY STAR requirements
MONITOR available with:
The same as Codec C40
Multipoint support
The same as Codec C40
The same as Codec C40
BASE available with:
The same as Codec C40
Floor standing footplate
Wheel base
Wall mount on pedestal
BANDWIDTH
The same as Codec C40
FIREWALL TRAVERSAL
The same as Codec C40
VIDEO STANDARDS
The same as Codec C40
VIDEO FEATURES
The same as Codec C40
VIDEO INPUTS (4 INPUTS)
The same as Codec C40
VIDEO OUTPUTS (2 OUTPUTS)
The same as Codec C40
LIVE VIDEO RESOLUTIONS (ENCODE/DECODE)
The same as Codec C40
AUDIO STANDARDS
The same as Codec C40
AUDIO FEATURES
The same as Codec C40
AUDIO INPUTS (5 INPUTS)
The same as Codec C40
Profile 52’’
MULTISITE FEATURES*
42’’ Full HD LCD, 16:9, 1080 × 1920 resolution
52’’ Full HD LCD, 16:9, 1080 × 1920 resolution
55’’ Full HD LCD, 16:9, 1080 × 1920 resolution
PROTOCOLS
EMBEDDED ENCRYPTION
The same as Codec C40
IP NETWORK FEATURES
The same as Codec C40
IPV6 NETWORK support
Profile 42’’
Canada
Height: 63.78 in. / 162 cm
Width: 38.58 in. / 98 cm
Depth: 6.7 in. / 17 cm
Weight: 220.5 lbs / 100 kg (with floor standing
footplate)
200.6 lbs / 91 kg (with wheel base)
Approved according to CAN/ CSA-C22.2 No. 60950-1
This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe A est conforme à
la norme NMB-003 du Canada.
The same as Codec C40
OPERATING TEMPERATURE AND HUMIDITY
Cisco unified communications manager
0° C to 35° C (32° F to 95° F) ambient temperature
10% to 90% relative humidity (RH)
The same as Codec C40
STORAGE AND TRANSPORT TEMPERATURE
SECURITY FEATURES
-20° C to 60° C (-4° F to 140° F) at RH 10–90%
(non-condensing)
The same as Codec C40
NETWORK INTERFACES
The same as Codec C40
OTHER INTERFACES
The same as Codec C40
PRECISIONHD 1080P CAMERA
The same as Codec C40 with 12 × zoom camera
SYSTEM MANAGEMENT
The same as Codec C40, as well as
Cisco TelePresence Touch 8” user interface device
DIRECTORY SERVICES
The same as Codec C40
* Requires option
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Profile 52’’
MTBF PRODUCT RELIABILITY/MTBF
Height: 63.78 in. / 162 cm
Width: 47.25 in. / 120 cm
Depth: 6.7 in. / 17 cm
Weight: 253.5 lbs / 115 kg (with floor standing
footplate)
229.3 lbs / 104 kg (with wheel base)
The predicted reliability is expressed in the expected
random Mean Time Between Failures (MTBF) for the
electronic components based on the Power On Hours:
Power On Hours (POH) > 69 000 hours
Useful Life Cycle > 6 years
Profile 55’’
All specifications are subject to change without notice, system specifics may vary.
All images in these materials are for representational purposes only, actual products may differ.
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other
countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks
mentioned are the property of their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company.
November 2011
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
DIMENSIONS
Approved according to UL60950-1 2nd ed.
Complies with FCC15B Class A
Note: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications. Operation of
this equipment in a residential area is likely to cause
harmful interference in which case the user will
be required to correct the interference at his own
expense.
ISO 9001 certificate is available upon request
Height: 64.6 in. / 164 cm
Width: 49.6 in. / 126 cm
Depth: 6.7 in. / 17 cm (without footplate)
Weight: 245 lbs / 111 kg (with floor standing footplate)
225lbs / 102 kg (with wheel base)
97
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Administrator guide
Password protection
Appendices
Appendices
Contact us
Supported RFCs
The RFC (Request for Comments) series contains technical
and organizational documents about the Internet, including the
technical specifications and policy documents produced by the
Internet Engineering Task Force (IETF).
The information on this page appilies to Cisco TelePresence
video systems running TC software:
• Cisco TelePresence Codec C Series (C90, C60, C40)
• Cisco TelePresence Profile Series using Codec C Series
• Cisco TelePresence EX Series (EX90, EX60)
• Cisco TelePresence MX Series (MX300, MX200)
• Cisco TelePresence Quick Set Series (C20, SX20)
Current RFCs and drafts supported
• RFC 1889 RTP: A Transport Protocol for Real-time
Applications
• RFC 2190 RTP Payload Format for H.263 Video Streams
• RFC 2396 Uniform Resource Identifiers (URI): Generic Syntax
• RFC 2429 RTP Payload Format for the 1998 Version of ITU-T
Rec. H.263 Video (H.263+)
• RFC 4566 SDP: Session Description Protocol
• RFC 4568 SDP:Security Descriptions for Media Streams
• RFC 4574 The Session Description Protocol (SDP) Label
Attribute
• RFC 4582 The Binary Floor Control Protocol
• RFC 4583 SDP Format for BFCP Streams
• RFC 4585 Extended RTP Profile for RTCP-Based Feedback
• RFC 2460 Internet protocol, version 6 (IPv6) specification
• RFC 4587 RTP Payload Format for H.261 Video Streams
• RFC 2617 Digest Authentication
• RFC 4629 RTP Payload Format for ITU-T Rec. H.263 Video
• RFC 2782 DNS RR for specifying the location of services
(DNS SRV)
• RFC 4733 RTP Payload for DTMF Digits, Telephony Tones
and Telephony Signals
• RFC 2976 The SIP INFO Method
• RFC 4796 The SDP Content Attribute
• RFC 3016 RTP Payload Format for MPEG-4 Audio/Visual
Streams
• RFC 4862 IPv6 stateless address autoconfiguration
• RFC 3047 RTP Payload Format for ITU-T Recommendation
G.722.1
• RFC 5589: SIP Call Control Transfer
• RFC 5168 XML Schema for Media Control
• RFC 3261 SIP: Session Initiation Protocol
• RFC 5626 Managing Client-Initiated Connections in the
Session Initiation Protocol (SIP)
• RFC 3262 Reliability of Provisional Responses in SIP
• RFC 6184 RTP Payload Format for H.264 Video
• RFC 3263 Locating SIP Servers
• RFC 6185 RTP Payload Format for H.264 ReducedComplexity Decoding Operation (RCDO) *
• RFC 3264 An Offer/Answer Model with SDP
• RFC 3311 UPDATE method
• RFC 3361 DHCP Option for SIP Servers
• RFC 3420 Internet Media Type message/sipfrag
• RFC 3515 Refer method
• RFC 3550 RTP: A Transport Protocol for Real-Time
Applications
Media capabilities supported in SIP
The audio and video media capabilities supported in SIP are the
same as for H.323.
• RFC 3581 Symmetric Response Routing
• RFC 3605 RTCP attribute in SDP
• RFC 3711 The Secure Real-time Transport Protocol (SRTP)
• RFC 3840 Indicating User Agent Capabilities in SIP
• RFC 3890 A Transport Independent Bandwidth Modifier for
SDP
• RFC 3891 The SIP “Replaces” Header
• RFC 3892 Referred-By Mechanism
• RFC 3960 Early Media
• RFC 4028 Session Timers in SIP
• RFC 4145 TCP-Based Media Transport in the SDP
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
98
* Applies to Cisco TelePresece SX20 Quick Set only.
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Password protection
Administrator guide
Appendices
Appendices
Contact us
User documentation on the Cisco web site
User documentation for Cisco TelePresence products can be
found on http://www.cisco.com/go/telepresence/docs.
Depending on which product you have got, select the
following in the right pane:
MX Series:
TelePresence Endpoints - Multipurpose
> Cisco TelePresence MX Series
Profile Series:
TelePresence Endpoints - Multipurpose
> Cisco TelePresence System Profile Series
EX Series:
TelePresence Endpoints - Personal
> TelePresence Desktop
> Cisco TelePresence System EX Series
Codec C Series:
TelePresence Solutions Platform
> TelePresence Integrator Products
> Cisco TelePresence System Integrator C Series
SX20 Quick Set and Quick Set C20:
TelePresence Solutions Platform
> TelePresence Quick Set
> Cisco TelePresence Quick Set Series
Document categories
For each product you will find the documents under the
following categories:
User guides:
Maintain and Operate | End-User Guides
Quick reference guides:
Maintain and Operate | End-User Guides
Installation guides:
Install and Upgrade | Install and Upgrade Guides
Getting started guide:
Install and Upgrade | Install and Upgrade Guides
Administrator guides:
Maintain and Operate | Maintain and Operate Guides
API reference guides:
Reference Guides | Command references
Physical interface guides:
Maintain and Operate | End-User Guides
Regulatory compliance and safety information:
Install and Upgrade | Install and Upgrade Guides
TC software release notes:
Release and General Information | Release Notes
TC software licensing information:
Release and General Information | Licensing Information
Video conferencing room guidelines:
Design | Design Guides
Note: All products do not have all types of user
documentation.
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
99
www.cisco.com
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents
Introduction
Web interface
Advanced settings
Administrator guide
Password protection
Appendices
Contact
Contact us
us
Intellectual property rights
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL
ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND
RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL
RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT
ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE
INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE
LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed
by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX
operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE
OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVENAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING,
WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE
PRACTICE.
Cisco contacts
On our web site you will find an overview of the worldwide Cisco contacts.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL,
CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST
PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS
MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Go to: http://www.cisco.com/web/siteassets/contacts
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Dr.
San Jose, CA 95134 USA
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and
other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks.
Third party trademarks mentioned are the property of their respective owners. The use of the word
partner does not imply a partnership relationship between Cisco and any other company. (1005R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended
to be actual addresses and phone numbers. Any examples, command display output, network
topology diagrams, and other figures included in the document are shown for illustrative purposes
only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and
coincidental.
TANDBERG is now a part of Cisco. TANDBERG® is a registered trademark belonging to Tandberg
ASA.
D14636.08 Profile C60-C40 and Codec C60-C40 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
100
www.cisco.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising