DRI-CHEM NX500 (PDF:2.2MB)

DRI-CHEM NX500 (PDF:2.2MB)
DE
50 ~ 3500
U/L
0.84 ~ 58.45 µ kat/L
4
10 ~ 1800
U/L
0.17 ~ 30.06 µ kat/L
5
CHE
5 ~ 500
U/L
0.08 ~ 8.35 µ kat/L
4.5
CKMB
1 ~ 300
U/L
0.02 ~ 5.01 µ kat/L
5
0.17 ~ 33.40 µ kat/L
4
U/L
0.17 ~ 20.04 µ kat/L
5
GOT/AST
10 ~ 1000
U/L
0.17 ~ 16.70 µ kat/L
4
GPT/ALT
10 ~ 1000
U/L
0.17 ~ 16.70 µ kat/L
4
LAP
10 ~ 500
U/L
0.17 ~ 8.35 µ kat/L
4
LDH
50 ~ 900
U/L
0.84 ~ 15.03 µ kat/L
2
LIP
20 ~ 1000
U/L
0.33 ~ 16.70 µ kat/L
5
1.79 ~ 49.98 mmol/L
4
Ca
4.0 ~ 16.0 mg/dL
1.00 ~ 4.00 mmol/L
5
18 ~ 2122 µmol/L
5
10 ~ 60
g/dL
CRE
0.2 ~ 24.0 mg/dL
DBIL
0.1 ~ 16.0 mg/dL
2 ~
g/L
4
274 µmol/L
6
10 ~ 600 mg/dL
0.6
~ 33.3 mmol/L
6
10 ~ 110 mg/dL
0.26 ~ 2.84 mmol/L
5
IP
0.16 ~ 4.84 mmol/L
4.5
0.2 ~
0.08 ~ 2.88 mmol/L
2
NH3
10 ~ 500
TBIL
0.2 ~ 30.0 mg/dL
TCHO
50 ~ 450 mg/dL
µg/dL
10 ~ 500 mg/dL
TP
2.0 ~ 11.0
UA
7 ~
357 µmol/L
6
3 ~
513 µmol/L
6
1.29 ~ 11.64 mmol/L
4
5 ~
40 mmol/L
TG
40 mmol/L
5
0.11 ~ 5.65 mmol/L
5
g/L
6
0.5 ~ 18.0 mg/dL
30 ~ 1071 µmol/L
4
Na
75 ~ 250
mEq/L
75 ~
K
1.0 ~ 14.0
mEq/L
1.0 ~ 14.0 mmol/L
Cl
50 ~ 175
mEq/L
50 ~
7.0 mg/dL
3 ~
Electrolytes
Immunological test
5 ~
7.0 mg/dL
CRP
0.3 ~
20 ~
g/dL
110
Indication
LDL Cholesterol
LDL
non-HDL Cholesterol
Albumin/Globulin ratio
70
mg/L
Composition of multilayered analytical film
Composition of multilayered film electrode
Sample (10µL)
Reference
fluid
Sample (50µL)
Bridge
Electrode
terminal
Multilayered film
electrode
Pertition materials
Spreading layer
Reflection layer
Reaction layer
Transparent support film
Front
Back
Spectrophotometer
Front
Back
Cl
K
Na
mmol/L
LDL-C = TCHO value - (HDL-C value + TG value/2.2)
ALB/GLOB
-
ALB/GLOB = ALB value / (TP value - ALB value)
BUN/CRE = BUN value / CRE value
BUN/CRE
-
Anion Gap
mEq/L or mmol/L
GLOB = TP value - ALB value
M
C
Anion Gap = Na value - (Cl value + TCO2 value)
Y
DRI-CHEM NX500 Series
Colorimetry 28 tests
NX500
Colorimetry 120 test/hour
Electrolyte tests
Combined 128 test/hour
Plasma Filter Function
Number of sample rack
1
Number of incubator cell
Colorimetry 12, Electrolytes 1
Measurement time
Colorimetry 2 to 6 minutes/test,
Sample type
Plasma, Serum, Whole blood*
Sample volume
Colorimetry 10µL/test,
Electrolytes 50µL/3 tests (Na-K-Cl), CRP 5µL/test
Data transmission to PC
non-HDL = TCHO value - HDL-C value
g/dL or g/L
Electrolytes 1 minute/3 tests (Na-K-Cl)
Each slide comes with an ion selective film electrode for
each of Na, K, and Cl. Slides quantify electrolytes in the
sample by a potentiometric method.
Equation
LDL-C = TCHO value - (HDL-C vlaue + TG value/5)
USB 2.0 or RS-232C Serial
D-Sub 9 pin -9 pin cross cable
Data print
Thermal Printer
Electrical requirements
AC 100-240V, 50/60Hz, 2.5-1.1A
Dimensions
470 (W) ✕ 360 (D) ✕ 420 (H) mm
Weight
NX500 Approx. 25kg, NX500i Approx. 24kg
Operating temperature
15 to 32˚C (59 to 89F)
Operating humidity
30 to 80%RH
*NH3-W: Whole blood only NH3-P: Plasma only
Na-K-Cl: Plasma, Serum, Whole blood
Other test items: Plasma, Serum
BL
NX500i
Automatic dilution
DRI-CHEM NX500(Product: FUJI DRI-CHEM NX500/ FUJI DRI-CHEM NX500i )
Please contact your local distributor for availability.
Option Item:
Barcode Reader
Barcode reader is available
as option item to read
sample ID on sample tube.
The specifications and appearance of the present brochure may be changed without prior
notification in order to improve the system. Please be sure to read the instruction manual
carefully for proper use of the equipment.
Potentiometer
26-30, NISHIAZABU 2-CHOME, MINATO-KU, TOKYO 106-8620, JAPAN
http://www.fujifilm.com/products/medical/
M
C
Y
BL
Image is NX500i
Ref. No. NX500E R2 (16·07·F1079·F9711) Printed in Japan ©2016 FUJIFILM Corporation
Automated Clinical Chemistry Analyzer
ne Equ
w ip
fu pe
nc d
tio w
na ith
lit
y
This multilayered slide is composed of dry chemical
ingredients needed for the reaction and other functional
materials. It quantifies enzymes and chemicals using
colorimetric method.
Unit
GLOB
Electrolytes 3 tests
(Electrolytes)
5
mg/dL
Anion Gap
Throughput
Potentiometric method slide
飯野
*Unit (A) or (B) is available
BUN/Creatinine ratio
Measurement test
Colorimetric method slide
DE6
1
mg/dL or mmol/L
Main specifications
(Enzymes, General chemistry, and Immunology)
00/00
■■■
175 mmol/L
non-HDL
Globulin
Fujifilm DRI-CHEM SLIDE
09/24
前川
NEW
Calculated Parameter
Image is NX500i
09/19
平本
250 mmol/L
There are parameters which may not be available in your area. For details please contact your local distributor.
Calculations
DRI-CHEM brings you a new world of Clinical Chemistry
作業MAC 進行担当
0.5 ~ 15.0 mg/dL
Mg
627
mm
09/13
平本
4
GLU
TCO2
128 tests/hour
6.0
HDL-C
Electrolytes
28 tests 3 tests
5.0 ~ 140.0 mg/dL
4C
297
mm
日付・作業担当者
2
3
General chemistry
1.0 ~
128 tests/hour
1
Biochemical tests
ALB
BUN
6 calculated tests
サイズ
U/L
10 ~ 1200
色数
10 ~ 2000
3 electrolytes tests
品 名
CPK
GGT
28 Colorimetric tests
得意先名
ALP
受注番号
Colorimetry
Measurement time (min.)
Unit (B)
Unit (A)
AMYL
Enzymes
Multiple Test Parameters
High Throughput
Measurement range (*)
Parameter
Classification
32
NX500カタログ
富士フイルム
2565021 プレゼンテック㈱様
Parameters
DE
A New Generation of Clinical Chemistry
Safety and Simplicity in Operation, Compactness,
Diversity in Tests…. ALL in ONE
Multiple Test Parameters
High Throughput
Colorimetry
Electrolytes
28 tests 3 tests
DRI-CHEM from FUJIFILM is a dry chemistry analyzer which can
perform multiple test parameters of Clinical Chemistry.
128 tests/hour
It has a built-in auto-pipetting system, requires no calibration and
no water, providing easy preparation and maintenance. The new
DRI-CHEM NX500 delivers results using a simple 3-step
procedure. With its quick, easy operation and compactness,
“Real Time and Borderless” Clinical Chemistry is made possible.
Simple 3-step procedure
Image is NX500i
Fully Automated Procedure
1. Set the slide (Dry Slide Reagents). 2. Set the sample. 3. Press START.
No Parameter Input Required
Information of the parameter is incorporated in the bar code printed on the back of every slide.
1
2
Set the slide (Dry Slide Reagents)
3
Set the sample
Fujifilm DRI-CHEM SLIDE
Press START
Colorimetric method slide
Potentiometric method slide
(Enzymes, General chemistry, and Immunology)
(Electrolytes)
This multilayered slide is composed of dry chemical
ingredients needed for the reaction and other functional
materials. It quantifies enzymes and chemicals using
colorimetric method.
Each slide comes with an ion selective film electrode for
each of Na, K, and Cl. Slides quantify electrolytes in the
sample by a potentiometric method.
Composition of multilayered analytical film
Composition of multilayered film electrode
Reference
fluid
Sample (10µL)
Reagents indentification
Incubator
at display
Spreading layer
Measurement
Dry Slide Reagents
Read Slide Code
Sample
Light source
Reflection layer
Reaction layer
Transparent support film
Front
print out
Sample (50µL)
Bridge
Disposal
Back
Spectrophotometer
Electrode
terminal
Front
Back
Cl
K
Na
Multilayered film
electrode
Pertition materials
Potentiometer
DE
4C
297
mm
627
mm
Help Mode
Input ID
09/24
前川
DRI-CHEM from FUJIFILM is a dry chemistry analyzer which can
Result list View
perform multiple test parameters of Clinical Chemistry.
No pre-treatment of sample required
DRI-CHEM NX500 delivers results using a simple 3-step
procedure. With its quick, easy operation and compactness,
Plasma Filter (PF) can cut the turn around time and the pre-treatment
process of the sample. It can generate plasma sample by aspirating
and separating the whole blood inside the PF within 1 minute. Just set
the PF on top of the sample tube and press START.
“Real Time and Borderless” Clinical Chemistry is made possible.
Blood Collection Tube ( 13~16 ✕ 75~100mm)
FUJI PLAIN TUBE (0.5mL, 1.5mL)
FUJI HEPARIN TUBE (0.5mL, 1.5mL)
NEW
Calculation
Minimize the risk of
biological hazard
The NX500 analyzer can provide results for 6 calculated
parameters. No need for external calculation for
commonly used parameters.
Aspiration
1 Have the PF card read in the
designated analyzer.
2 Set PF on the top of
Simple 3-step procedure
sample tube.
A
C
B
Slide reagents after measurement
will be automatically discarded to
the disposal box, minimizing the
risk of contamination.
Plasma accumulation
Blood cell separating
membrane
Grass fiber layer for
blood cell separating
3 Press Start.
Image is NX500i
飯野
Basic Mode / Advanced Mode
It has a built-in auto-pipetting system, requires no calibration and
no water, providing easy preparation and maintenance. The new
DE-6
M
C
4 Suction unit move to be connected
on PF and start aspiration
of whole blood. B
Reagents indentification
Press START
Incubator
Dry Slide Reagents
Sample
Light source
Only 10µL/Test
Automatic dilution
Each test needs only 10µL of sample.
(CRP needs 5µL/test, ISE needs 50µL/3
tests). Manual pipetting can be also
performed when less sample available.
Less invasive for newborn at NICU.
Dilution, a time consuming
process, is also automated in
FUJI DRI-CHEM. Just set the
ratio of dilution and press
START. Dilution test also can
be performed simultaneously
with the regular tests,
requiring no separation of
tests.
at display
Measurement
Read Slide Code
Accurate and reliable test results from long term and
field-proven technology & experience
PF function is available in NX500 only.
TCO2: not applicable
3
Set the sample
BL
Sample Tube
A
print out
Disposal
10 µL/Test
M
The FUJI DRI-CHEM slide reagent has high reliability and stability brought by fine chemical technology cultivated
through the long history of FUJIFILM in photographic film manufacturing.
Less variation of results between operators, high result reproducibility and daily precision,
and excellent correlation with wet chemistry are its remarkable features.
1000
800
600
400
200
y =0.9946x-0.2277
r =0.999
Syx =7.518
n=89
0
0
200 400 600 800 1000
IFCC standardization method (no PALP) (U/L)
C
Y
BL
600
GOT/AST
10.0
GLU
500
400
300
y =1.0142x-2.9183
r =0.999
Syx =8.143
n=55
200
100
0
0
100 200 300 400 500 600
Hexokinase method (mg/dL)
24.0
K
8.0
6.0
4.0
2.0
0.0
0.0
y =1.0129x-0.1073
r =0.999
Syx =0.071
n=57
2.0
4.0
6.0
8.0
10.0
Emission flame method (mEq/L)
FUJI DRI-CHEM (mg/dL)
Set the slide (Dry Slide Reagents)
at glass fiber layer in PF to
sample Plasma. C
FUJI DRI-CHEM (mEq/L)
2
5 Whole blood is being separated
FUJI DRI-CHEM (U/L)
1
Y
FUJI DRI-CHEM (mg/dL)
Fully Automated Procedure
1. Set the slide (Dry Slide Reagents). 2. Set the sample. 3. Press START.
No Parameter Input Required
Information of the parameter is incorporated in the bar code printed on the back of every slide.
CRE
18.0
12.0
6.0
0.0
0.0
y =0.9974x+0.0185
r =0.999
Syx =0.258
n=63
6.0
12.0
18.0
Enzymatic method (mg/dL)
24.0
作業MAC 進行担当
A range of sample tubes
can be used
4
00/00
■■■
日付・作業担当者
2
3
09/19
平本
*CRP: Further calibration by liquid calibrators is needed.
ISE: QC card system is not used.
1
09/13
平本
サイズ
A magnetic card called QC card will adjust
the lot variability in the slide reagents.
A QC card comes with every reagent box.
The analyzer memorizes the lot
adjustment information once a QC card is
swiped. No need to swipe QC in every
measurement for the same slide lot.
色数
5.7 inch VGA, 640 ✕ 480. Qwerty touch Key board. Basic Mode /
Advanced Mode are available according to user preference.
(Basic Mode: displays operation procedure for one sample only.
Advanced Mode: displays operation procedure for one sample and
measurement status for previous measured samples.)
品 名
No calibration required *
QC card system
Easy operation by touch screen
得意先名
Safety and Simplicity in Operation, Compactness,
Diversity in Tests…. ALL in ONE
受注番号
32
NX500カタログ
富士フイルム
2565021 プレゼンテック㈱様
A New Generation of Clinical Chemistry
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising