2014 Nissan Armada | Quick Reference Guide | Nissan USA

2014 Nissan Armada | Quick Reference Guide | Nissan USA
QUICK REFERENCE GUIDE
ARMADA
2014
1590747_14b_Armada_QRG_011614.indd 3
1/16/14 10:40 AM
1590747_14b_Armada_QRG_011614.indd 4
14
04
03
01
02
06
05
07
15
16
08 09
10 11
12
17
Behind
shift lever
13
Underneath
instrument panel
01 HEADLIGHT AND TURN SIGNAL CONTROL
02 INSTRUMENT BRIGHTNESS CONTROL*
03 VEHICLE INFORMATION DISPLAY*
1/16/14 10:40 AM
04 LOW TIRE PRESSURE WARNING LIGHT
18
WHEEL SWITCHES FOR
06 STEERING
AUDIO* / BLUETOOTH® / NAVIGATION
07 CRUISE CONTROL
08 POWER LIFTGATE SWITCH
09 POWER VENT WINDOWS*
05 WINDSHIELD WIPER AND WASHER SWITCH 10 PEDAL POSITION ADJUSTMENT SWITCH*
*See your Owner’s Manual for information.
19
20 21
11 REAR SONAR SYSTEM OFF SWITCH*
12 STEERING WHEEL TILT ADJUSTMENT*
13 HOOD RELEASE*
14 CONTROL PANEL DISPLAY*
15 AUDIO SYSTEM
16 AUTOMATIC CLIMATE CONTROLS
18
PASSENGER AIR BAG
17 FRONT
STATUS LIGHT*
18 HEATED SEAT SWITCH*
19 HEATED STEERING WHEEL SWITCH*
20 VEHICLE DYNAMIC CONTROL (VDC)
OFF SWITCH*
21 TOW MODE SWITCH*
NEW SYSTEM FEATURES
RearView Monitor (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
TABLE OF CONTENTS
ESSENTIAL INFORMATION
Tire Pressure Monitoring System (TPMS) . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Loose Fuel Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Fuel-filler Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Clock Set/Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
FIRST DRIVE FEATURES
NISSAN Intelligent Key® System (if so equipped) . . . . . . . . . . . . . . . . . . . . 4
Power Liftgate Release (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Power Front Seat Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2nd Row Seat Adjustments (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . 5
3rd Row Power Folding Seats (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . 6
Automatic Drive Positioner (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Outside Mirror Control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Starting/Stopping the Engine
(NISSAN Intelligent Key® models only - if so equipped) . . . . . . . . . . . . . . . 7
Headlight Control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Windshield Wiper and Washer Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Automatic Climate Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
FM/AM/SiriusXM® Satellite Radio with CD/DVD Player (if so equipped) . . . 10
USB/Aux Jack and iPod® Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Cruise Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Power Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
SYSTEM GUIDE
Vehicle Information Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Bluetooth® Hands-free Phone System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
System Operating Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Bluetooth® System without Navigation (if so equipped) . . . . . . . . . . . . . . 14
Bluetooth® System with Navigation (if so equipped) . . . . . . . . . . . . . . . . 16
Navigation System (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Dual Head Restraint DVD System (if so equipped) . . . . . . . . . . . . . . . . . . 19
HomeLink® Universal Transceiver (if so equipped) . . . . . . . . . . . . . . . . . . 20
Please see your Owner’s Manual for important safety
information and system operation limitations.
• A cellular telephone should not be used for any purpose while
driving so full attention may be given to vehicle operation.
• Always wear your seat belt.
• Supplemental air bags do not replace proper seat belt usage.
• Children 12 and under should always ride in the rear seat
properly secured in child restraints or seat belts according to
their age and weight.
• Do not drink and drive.
For more information, refer to the “Safety –– Seats, seat belts and
supplemental restraint system (section 1)”, “Monitor, climate, audio,
phone and voice recognition systems (section 4)” and the “Starting
and driving (section 5)” of your Owner’s Manual.
Additional information about your vehicle is also available in
your Owner’s Manual, Navigation System Owner’s Manual
and at www.nissanusa.com.
1590747_14b_Armada_QRG_011614.indd 5
To view detailed
instructional videos, go to
www.nissanownersinfo.mobi/
2014/armada
or snap this barcode with an
appropriate barcode reader.
1/16/14 10:40 AM
NEW SYSTEM FEATURES
REARVIEW MONITOR (if so equipped)
When the shift lever is shifted into the
R (REVERSE) position, the monitor display shows
a rearward view from the vehicle.
The colored guide lines on the display screen
indicate vehicle width and approximate distances to
objects with reference to the vehicle body line:
• Red 1.5 ft (0.5 m); Yellow 3 ft (1 m); Green 7 ft (2 m) and 10 ft (3 m).
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
ESSENTIAL INFORMATION
TIRE PRESSURE MONITORING SYSTEM (TPMS)
A CHECK TIRE PRESSURE warning message will
appear in the vehicle information display 01 and the
low tire pressure warning light 02 will illuminate when
one or more tires are low on pressure and air is needed.
•T
he tire pressures should be checked when the
tires are cold. The tires are considered cold after
the vehicle has been parked for 3 hours or more or
driven less than 1 mile (1.6 km) at moderate speeds.
01
02
After tire pressures are adjusted, drive the vehicle at speeds above 16 MPH (25 km/h).
The CHECK TIRE PRESSURE warning message and the low tire pressure warning light
will extinguish.
When the low tire pressure warning light flashes for 1 minute and then remains on, the
TPMS is not functioning properly. Have the system checked by a NISSAN dealer.
Tire pressure rises and falls depending on the heat caused by the vehicle’s operation and the
outside temperature. Low outside temperature can lower the temperature of the air inside the
tire, which can cause a lower tire inflation pressure. This may cause the low tire pressure
warning light to illuminate. If the warning light illuminates, check the tire pressure in your tires.
• Check the tire pressure (including the spare tire) often and always prior to long distance trips.
The Tire and Loading Information label contains valuable information. Please refer to “Technical
and consumer information (section 9)”, in your Owner’s Manual for the location of the Tire
and Loading Information label.
For more information, refer to the “Instruments and controls (section 2)”, the “Starting and driving (section 5)” and the
“Maintenance and do-it-yourself (section 8)” of your Owner’s Manual.
2
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
1590747_14b_Armada_QRG_011614.indd 2
1/16/14 10:40 AM
LOOSE FUEL CAP
A LOOSE FUEL CAP warning message will appear
in the vehicle information display 01 when the
fuel-filler cap is not tightened correctly.
To tighten, turn the cap clockwise until a single click
is heard.
01
02
The warning message will disappear when the vehicle detects the fuel-filler cap is properly
tightened and the reset button 02 is pressed.
If the cap is not properly tightened, the Malfunction Indicator Light
may illuminate.
For more information, refer to the “Instruments and controls (section 2)” and the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
FUEL-FILLER DOOR
The fuel-filler door is located on the driver’s side of
the vehicle.
To open the fuel-filler door, pull the lid open.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
CLOCK SET/ADJUSTMENT
To adjust the time and the appearance of the clock
on the display:
1. Press the SETTING button on the control panel.
2. Touch the “Clock” key.
The following settings can be adjusted:
•O
n-screen Clock: The clock in the upper right
corner of the display can be turned ON or OFF.
• C
lock Format (24h): The clock can be set to 12
hours or 24 hours.
•O
ffset (hour): The time can be adjusted by increasing or decreasing per hour.
•O
ffset (min): The time can be adjusted by increasing or decreasing per minute.
•D
aylight Savings Time: The application of daylight savings time can be turned ON or OFF.
•T
ime Zone: Adjust the time zone. Choose a time zone from the available list.
Press the
BACK button to return to the previous screen.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of
your Owner’s Manual.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
1590747_14b_Armada_QRG_011614.indd 3
3
1/16/14 10:40 AM
FIRST DRIVE FEATURES
NISSAN INTELLIGENT KEY® SYSTEM (if so equipped)
The NISSAN Intelligent Key® System allows you to lock or
unlock the vehicle, open the liftgate and start the engine. It is
important to make sure the Intelligent Key is with you
(that is, in your pocket or purse).
01
The operating range of the Intelligent Key is within
31.5 in (80 cm) from each request switch.
To lock the vehicle, push either door handle request
switch 01 once or press the button 02 on the key fob.
To unlock the vehicle, perform one of the following procedures:
02
03
• Push either door handle request switch 01 once; the
corresponding door will unlock. Push the door handle request
switch 01 again within 30 seconds; all other doors will unlock, or
04
05
• Press the button 03 on the key fob to unlock the driver’s side
door. Press the button again; all other doors will unlock.
To open the liftgate, press the
button 04 for more than 1 second.
The Intelligent Key can also be used to activate the panic alarm by pressing and holding the
button 05 for more than 0.5 seconds. Once activated, the panic alarm and headlights
will stay on for a period of time.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, the “Starting and driving (section
5)” and the “Maintenance and do-it-yourself (section 8)” of your Owner’s Manual.
POWER LIFTGATE RELEASE (if so equipped)
When the liftgate is closed, the liftgate will fully open
automatically by:
01
Pushing the power liftgate switch 01 on the
instrument panel.
Pulling the power liftgate handle 02 , once the
vehicle is unlocked.
02
Pressing the rear liftgate release button 03 on the key fob for more
than 1 second.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your
Owner’s Manual.
4
03
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
1590747_14b_Armada_QRG_011614.indd 4
1/16/14 10:41 AM
POWER FRONT SEAT ADJUSTMENTS
To slide the seat forward or backward, push the
control switch 01 forward or backward.
03
To adjust the angle of the seatback, push the switch
02 forward or backward.
SEAT LIFTER (driver’s seat only)
To adjust the angle and height of the seat cushion,
push the front or rear end of the switch 01 up
or down.
01 02
MANUAL LUMBAR SUPPORT (driver’s seat only)
To adjust the lumbar area, move the lever 03 up or down.
For more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (section 1)” of your
Owner’s Manual.
2ND ROW SEAT ADJUSTMENTS (if so equipped)
To recline the seatback, pull up on the recline handle
01 and lean back. To bring the seatback forward, pull
the handle up and lean your body forward. Release
the handle to lock the seatback in position.
01
TIP UP FOR EASY ENTRY/EXIT OF THE 3RD ROW
1.Raise the armrest (captain’s chairs – if so equipped)
so it is parallel to the seatback and in the stowed position.
2.Then lift up on the seatback latch 02 located on the
upper corner of the seatback and fold the seatback
forward onto the seatbase.
02
3.Finally, lift up on the lower corner of the seat base
and fold the seat forward.
For more information, refer to the “Safety –– Seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
1590747_14b_Armada_QRG_011614.indd 5
5
1/16/14 10:41 AM
FIRST DRIVE FEATURES
3RD ROW POWER FOLDING SEATS (if so equipped)
Before operating the 3rd row seats:
• Make sure the 2nd row seatback is not reclined.
• Lower the 3rd row headrest to the full down position.
• Disconnect and secure the center seat belt and tongues into the retractor base. Always
reconnect the center seat belt when the seat is returned to the upright position.
• Make sure that there are no objects on the seatback cushion.
The 3rd row power folding seat controls are located
behind the 2nd row seat (passenger’s side) on the
3rd row cup holder console 01 and on the rear
quarter trim panel behind the 3rd row seats
(passenger’s side) 02 .
01
To fold down the 3rd row seats, push and hold the
bottom portion of the switch.
To raise the 3rd row seats, push and hold the top
portion of the switch.
If the ignition switch is in the OFF position, the
power folding seats are always operational.
If the ignition switch is in the ON position, the power
folding seats are only operational when the shift
lever is in the P (PARK) or N (NEUTRAL) position.
02
For more information, refer to the “Safety –– Seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.
AUTOMATIC DRIVE POSITIONER (if so equipped)
Two positions for the driver’s seat, accelerator and
brake pedals and outside mirrors can be stored in
the automatic drive positioner memory.
Follow these procedures to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Place the ignition switch in the ON position.
• Adjust the driver’s seat, accelerator and brake pedals and outside mirrors to the desired
positions using the adjusting switches for each feature.
• Push the SET switch and within 5 seconds, push the memory switch (1 or 2) for at least
1 second.
• The indicator light on the memory switch you select will illuminate for approximately 5 seconds.
• The driver’s seat, accelerator and brake pedals and outside mirror positions are now set to
your preference.
These memorized positions can also be linked to your NISSAN Intelligent Key®.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
6
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
1590747_14b_Armada_QRG_011614.indd 6
1/16/14 10:41 AM
OUTSIDE MIRROR CONTROL SWITCH
To select the right or left side mirror, turn the control
switch 01 right or left.
01
To adjust the mirror angle, move the control switch
01 up, down, right or left.
02
To prevent accidentally moving the mirror, turn and
set the switch to the middle (neutral) position.
POWER FOLDING OUTSIDE MIRRORS
(if so equipped)
To open or close the mirrors, push the switch 02 .
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
STARTING/STOPPING THE ENGINE (NISSAN Intelligent Key®
models only - if so equipped)
Depress the brake pedal.
Push the ignition switch in.
Turn the ignition switch to the START position.
TURNING THE ENGINE OFF
Move the shift lever to the P (PARK) position, apply
the parking brake and turn the ignition switch to the
LOCK position.
For more information, refer to the “Starting and driving (section 5)” of
your Owner’s Manual.
HEADLIGHT CONTROL SWITCH
HEADLIGHT CONTROL
Turn the headlight control switch to the
position
01 to turn on the front parking, tail, license plate and
instrument panel lights. Turn the switch to the
position 02 to turn on the headlights.
03
01
02
AUTOLIGHT SYSTEM
The autolight system will automatically turn the headlights on when it is dark and off when it is
light. The system will keep the headlights on for a period of time after you turn the ignition off
and all doors are closed.
To activate the autolight system, turn the headlight control switch to the AUTO position 03
then turn the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF,
position 01 or
position 02 .
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
1590747_14b_Armada_QRG_011614.indd 7
7
1/16/14 10:41 AM
FIRST DRIVE FEATURES
HIGH BEAM SELECT
Push the headlight control switch forward 04 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull
the headlight switch back to the original position
to select the low beam. The blue indicator light
will extinguish.
04
05
Pull and release the headlight control switch 05 to
flash the headlight high beams on and off.
FOG LIGHT SWITCH (if so equipped)
The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the
to turn the fog lights on.
position 06
Turn the switch (inside collar) to the OFF position to
turn the fog lights off.
06
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
WINDSHIELD WIPER AND WASHER SWITCH
Move the lever to the following positions to operate
the windshield wipers:
03
MIST 01
01 Mist (MIST) - One sweep operation of the
front wipers.
OFF
02 I ntermittent (INT) - Front wipers operate
INT 02
intermittently. The intermittent operation speed
can be adjusted by twisting the time control
ring 03 to increase or decrease wiper speed.
LO 04
HI 05
04 Low (LO) - Front wipers operate at a continuous
low-speed.
05 High (HI) - Front wipers operate at a continuous
high-speed.
06 Front washer
- Pull the lever toward you to
activate the front washer. The front wipers will
operate several times.
06
09
REAR WINDSHIELD WIPER AND WASHER
07 Intermittent (INT) - Rear wiper
operates intermittently.
08 Low (ON) - Rear wiper operates at a
ear washer
09 R
07
INT
08
ON
continuous low-speed.
- Push the lever forward to activate the rear washer.
The rear wiper will operate several times.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
8
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
1590747_14b_Armada_QRG_011614.indd 8
1/16/14 10:41 AM
08
04
05
03
01
02
09
06
07
AUTOMATIC CLIMATE CONTROLS
01 AUTO BUTTON/DRIVER’S SIDE TEMPERATURE CONTROL DIAL
The auto mode may be used year-round. Press the AUTO button to turn the system on
and the system will automatically control the inside temperature (automatic cooling and/or
dehumidified heating), air flow distribution and fan speed.
Turn the driver’s side temperature control dial left for cooler air or right for warmer air.
02 DUAL BUTTON/PASSENGER’S SIDE TEMPERATURE CONTROL DIAL
Press the passenger’s side DUAL control button to turn the passenger’s side temperature
controls on or off. This will allow the passenger’s side temperature to be adjusted
independently from the driver’s side.
Turn the passenger’s side temperature control dial left for cooler air or right for warmer air.
03 FAN SPEED CONTROL BUTTONS
Press the fan speed control buttons to manually adjust the fan speed faster
slower
.
or
04 DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS
Press the front window defroster button
to turn the system on. The A/C automatically
turns on when the defroster mode is selected. This feature removes humidity from the air.
Use the temperature control dial 01 to set the desired temperature.
To set the defroster on high, press the fan speed control button
speed to the maximum setting.
to increase the fan
05 MODE BUTTON
Press the MODE button 05 to cycle through the following air flow outlets:
Air flows from the center and side vents.
Air flows from the center, side, and foot vents.
Air flows mainly from the foot vents.
Air flows from the defroster and foot vents.
06 REAR WINDOW AND OUTSIDE MIRROR DEFROSTER SWITCH
Push the rear window defroster switch
to turn the system on or off.
The rear window defroster automatically turns off after approximately 15 minutes.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
1590747_14b_Armada_QRG_011614.indd 9
9
1/16/14 10:41 AM
FIRST DRIVE FEATURES
07 AIR RECIRCULATION BUTTON
Press the air recirculation button
to recirculate air inside the vehicle. The indicator
light on the button will illuminate. This mode helps to adjust the inside vehicle temperature
more effectively.
Press the air recirculation button
again to turn air recirculation off. This allows
outside air to be drawn into the passenger compartment to prevent fogging in defrost,
floor or defrost/floor modes.
The air recirculation mode cannot be activated when the climate control system is in the
front defroster mode
or front defroster and foot vent
mode.
08 A/C BUTTON
Press the A/C button to manually turn the A/C on or off.
09 OFF BUTTON
Press the OFF button to turn the climate control system off.
For more information, refer to the “Instruments and controls (section 2)” and the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
03
05
06
04
04
02
01
FM/AM/SiriusXM®* SATELLITE RADIO WITH CD/DVD PLAYER
(if so equipped)
01 VOLUME/ON•OFF CONTROL KNOB
Press the VOL/ON•OFF control knob to turn the system on or off.
Turn the knob right or left to increase or decrease the volume.
02 TUNE/FOLDER/AUDIO CONTROL KNOB
To manually tune the radio, turn the TUNE/FOLDER/AUDIO knob left or right.
03 SEEK/CAT AND TRACK BUTTONS
To scan quickly and stop at the previous or next broadcast station, press the
CAT button or the TRACK
button.
For satellite radio, press the
SEEK/CAT button or the TRACK
the first channel of the previous or next category.
To change tracks on a CD, press the
To fast forward or rewind a track on a CD, press and hold the
the TRACK
button.
SEEK/
button to switch to
SEEK/CAT button or the TRACK
button.
SEEK/CAT button or
*SiriusXM® Satellite Radio is only available on vehicles equipped with an optional satellite radio subscription service.
10
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
1590747_14b_Armada_QRG_011614.indd 10
1/16/14 10:41 AM
04 STATION PRESET BUTTONS
Twelve stations can be set for the FM band, six for the AM band and eighteen for
satellite radio.
To store a station in a preset, you must first select a radio band by pressing the AM/FM
button 05 or XM button 06 , then tune to the desired AM, FM or XM satellite radio station.
Then press and hold the desired station preset button (1-6) until the preset number is
updated on the display and the sound is briefly muted. The channel indicator will then
come on and the sound will resume. Programming is now complete.
To retrieve a previously set station, select the radio band where the preset was stored
then press the corresponding station select button (1-6).
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
USB/AUX JACK AND iPOD® INTERFACE
The USB/Aux jack 01 is located in the center console
under the arm rest.
When a compatible USB memory device, iPod® or
auxiliary device is plugged into the USB/Aux jack,
compatible audio files stored on the device can be
played through the vehicle’s audio system.
01
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems
(section 4)” of your Owner’s Manual.
CRUISE CONTROL
The cruise control system enables you to set a constant
cruising speed once the vehicle has reached
25 MPH (40 km/hr).
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
04
03
02
01
To activate the cruise control, push the ON/OFF
switch 01 . The CRUISE indicator light in the
vehicle information display will illuminate.
To set cruising speed, accelerate the vehicle to the desired speed, push the COAST/
SET switch 02 and release. The SET indicator light in the vehicle information display will
illuminate. Take your foot off the accelerator pedal. Your vehicle will maintain the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch 03 .
When the vehicle attains the desired speed, release the switch.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
1590747_14b_Armada_QRG_011614.indd 11
11
1/16/14 10:41 AM
To reset at a slower cruising speed, push and hold the COAST/SET switch 02 . Release
the switch when the vehicle slows to the desired speed.
To cancel the preset speed, tap the brake pedal or push the CANCEL switch 04 .
To turn off cruise control, push the ON/OFF switch 01 . Both the CRUISE
indicator light and SET indicator light in the vehicle information display will extinguish.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
POWER OUTLETS
The power outlets are used for powering electrical
accessories such as cellular telephones. They are
rated at 12 volt, 120W (10A) maximum.
Power outlets are located on the instrument
panel 01 , on the rear console 02 and in the
cargo area 03 .
01
01
To use a power outlet, open the cap.
The power outlets are powered only when the
ignition switch is in the ACC or ON position.
02
For more information, refer to the “Starting and driving (section 5)” of
your Owner’s Manual.
03
12
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
1590747_14b_Armada_QRG_011614.indd 12
1/16/14 10:41 AM
SYSTEM GUIDE
VEHICLE INFORMATION DISPLAY
The vehicle information display 01 is located to the
left of the speedometer.
01
Press the vehicle information display INFO button
02 located on the instrument panel to toggle through
the following modes:
• M PG – Displays the instant fuel economy since
the last reset.
• RANGE – Displays the estimated distance the
vehicle can be driven before refueling.
• WARNING – Displays when a warning is present.
02
03
To highlight the desired menu option within the selected mode, turn the INFO button.
To enter the highlighted menu, press the INFO button.
To reset TRIP A or TRIP B, go to the desired mode on the trip computer and press and
hold the change button 03 for more than 1 second.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
BLUETOOTH® HANDS-FREE PHONE SYSTEM
Bluetooth Streaming Audio (available with Navigation
System only) allows you to use a compatible Bluetooth
phone to play audio files on your device. Your
compatible cellular phone can be connected to the
vehicle’s audio system allowing audio files to play
through the vehicle’s speakers.
Bluetooth® Controls
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTEM OPERATING TIPS
Press the
or
button to interrupt the voice
prompts at any time and speak a command after
the tone.
To use the system faster, you may speak the second
level commands with the main menu command on the
or
button
main menu. For example, press the
and after the tone say “Call Redial”.
The “Help” command can be used to hear a list of
available commands at any time.
Microphone
Reduce background noise as much as possible by
closing windows and pointing HVAC vents away from ceiling.
Speak naturally without long pauses and without raising your voice.
*Some jurisdictions prohibit the use of cellular telephones while driving.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
1590747_14b_Armada_QRG_011614.indd 13
13
1/16/14 10:41 AM
SYSTEM GUIDE
When speaking Phonebook names, please be aware some phones require the last
name to be spoken before the first name. For example, “Michael Smith” may be spoken
as “Smith Michael”.
To cancel a voice recognition session, say “Cancel” or “Quit”, or press and hold the
or button.
If the Voice Recognition system does not recognize your voice commands, train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detailed information.
For more detailed information and instructions, refer to your cellular phone Owner’s Manual
and visit www.nissanusa.com/bluetooth.
Bluetooth® System without Navigation* (if so equipped)
PAIRING PROCEDURE
The vehicle must be stationary when pairing the phone.
1.Press the
button on the steering wheel. The system announces the available commands.
2.Say: “Setup”. The system acknowledges the command and announces the next set of
available commands.
3.Say: “Pair phone”. The system acknowledges the command and announces the next set of
available commands.
4.Say: “New phone”. The system acknowledges the command and asks you to initiate pairing
from the phone handset.
5. Initiate connecting from the phone.
• The pairing procedure varies according to each cellular phone model. For detailed pairing
instructions and a list of compatible phones, please visit www.nissanusa.com/bluetooth.
• When prompted for a PASSKEY code, enter “1234” from the handset. (The PASSKEY
code is assigned by NISSAN and cannot be changed.)
6.When the system asks you to provide a name for the
phone, say the name. You can give the phone a name
of your choice.
7.When the system asks you for a priority level, say a
number between 1 and 5. The priority level determines
which phone interacts with the system when two or
more paired phones are active in the vehicle at the
same time. Choose 1 if this is the only phone or the
primary phone.
8.When the system asks if you would like to select a
custom ring tone, say “Yes” or “No”. Follow the instructions provided by the
system to choose a ring tone.
*Some jurisdictions prohibit the use of cellular telephones while driving.
14
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
1590747_14b_Armada_QRG_011614.indd 14
1/16/14 10:41 AM
PHONEBOOK SETUP
Each paired phone has its own dedicated phonebook. Each phonebook can store up to 40 names.
Each name can have up to four locations/numbers: Home, Office, Mobile and Other.
The vehicle must be stationary when adding new entries.
1. Press the
button and wait for the tone.
2. Say: “Phonebook”.
3. Wait for the tone, then say “New entry”.
4.When prompted, say the name for the new entry. For example, say “Michelle”. If the name is too
short or too long, or if it sounds too much like a name that is already stored in the phonebook,
the system tells you and prompts you to say a name again. Choose a new name.
5. When the system asks you to confirm the name is correct, say: “Yes” or “No”.
6.When the system asks you to provide a location, say the name of the location (“Home,” “Office,”
“Mobile” or “Other”). The system acknowledges the location.
• By voice command - When prompted, say a phone number for the location. For example,
say “five five five one two one two.” The system repeats the number and prompts you for the
next command.
•B
y Bluetooth® transfer - Say: “Transfer entry”. The system acknowledges the command and
asks you to initiate the transfer from the phone handset. The new contact phone number will
be transferred from the cellular phone via the Bluetooth® communication link. The transfer
procedure varies according to each cellular phone. See the cellular phone Owner’s Manual
for details.
7.When you are finished entering numbers, say “Store”. The system confirms the name, location
and number.
8.When the system asks if you would like to store another location for the same name, say “Yes”
or “No”. If you do not respond to the system prompt, the system ends the New Entry session.
MAKING A CALL
1. Press the
button.
2. After the tone, do one of the following:
• Say: “Call [name] [location]”. For example, say “Call Michelle Home”.
• Say: “Call [number]”. For example, say “Call 123-456-7891”.
• Say: “Redial” to redial the previous phone number called by the system.
• Say: “Call International” to dial more than 10 digits or any special characters.
3.When you have finished speaking the phone number, wait for the system to repeat it back to
you, then say “Dial”.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
1590747_14b_Armada_QRG_011614.indd 15
15
1/16/14 10:41 AM
SYSTEM GUIDE
RECEIVING/ENDING A CALL
When you receive a phone call, a ring tone sounds through the audio system.
To accept the call, press the
button.
To reject the call, press the
button.
To hang-up the phone at the end of a call or to disconnect during call placement, press
the
button.
Bluetooth® System with Navigation* (if so equipped)
CONNECTING PROCEDURE
The vehicle must be stationary when connecting
the phone.
1.Press the SETTING button on the instrument panel
and select the “Bluetooth” key on the display.
2. Select the “Connect Bluetooth” key.
3.A pop-up box will appear on the screen, prompting
you to confirm that the connection is for the phone
system. Select the “Yes” key.
4. Initiate connecting from the phone.
The connecting procedure varies according
to each cellular phone model. For detailed
connecting instructions and a list of
compatible phones, please visit
www.nissanusa.com/bluetooth.
When prompted for a PIN code, enter “1234” from the handset. (The PIN code is
assigned by NISSAN and cannot be changed.)
5. W
hen connecting is complete, the screen will return to the Bluetooth settings screen.
*Some jurisdictions prohibit the use of cellular telephones while driving.
16
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
1590747_14b_Armada_QRG_011614.indd 16
1/16/14 10:41 AM
PHONEBOOK SETUP
Depending on your cell phone, the system may
automatically download your cell phone’s entire
phonebook to the vehicle’s Bluetooth system.
If the phonebook does not download automatically, the
vehicle phonebook may be set for up to 40 entries.
To manually download entries:
1.Press the PHONE button and select the
“Vehicle Phonebook” key.
2.Select the “Add New” key at the top of the display.
There are different methods to input a phone
number. Select one of the following options:
• “Copy from Call History” to save a number from
the Outgoing, Incoming or Missed Calls lists.
• “Copy from the Handset” to save a number that
has been downloaded from your handset to
the vehicle.
• “Enter Number by Keypad” to input the number
and name manually.
MAKING A CALL
To make a call, follow this procedure:
1.Press the PHONE button on the instrument panel
or the button on the steering wheel. The “Phone”
menu will appear on the control panel display.
2.Select the “Vehicle Phonebook”, “Call History”,
“Handset Phonebook” or “Dial Number” key.
3. Select the desired entry from the list.
4.Dialing begins when the entry is selected or when the “OK” key is selected.
RECEIVING/ENDING A CALL
To accept the call, press the PHONE button on the
instrument panel, the button on the steering
wheel or touch the “Answer” key.
To reject a call, touch the “Reject Call” key on the
display or press and hold the button on the
steering wheel.
To hang-up, press the
“Hang Up” key.
button or touch the
For more information, refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)” of your Owner’s Manual or visit
www.nissanusa.com/bluetooth.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
1590747_14b_Armada_QRG_011614.indd 17
17
1/16/14 10:41 AM
SYSTEM GUIDE
01
02
06
05
03
04
07
08
10
09
11
12
NAVIGATION SYSTEM (if so equipped)
Your Navigation System can calculate a route from the current location to a preferred destination.
The real-time map display and turn-by-turn voice guidance will lead you along the route.
The Navigation System will continually update your vehicle’s position. If you have deviated
from the original route, it will recalculate the route from your current location.
01 Touch-screen display
02 Destination (DEST) – Press to enter a destination.
ROUTE – Press to access guidance control functions (guidance cancellation, route
03 priority, waypoint setting on the route, etc.).
04 OFF – Press to switch between the day screen (bright) and the night screen (dark).
Press and hold the button to turn the display off. Press again to turn the display on.
MAP – Press to display the map. While following a programmed route, press multiple
05 times to change the type of route information.
06 Multi-Function Controller
a. E NTER – Press to select the highlighted item on the screen. If this button is pressed
while a map is displayed, the map menu screen is displayed.
b. Main directional buttons – Press to move across the map, highlight an item on the
screen or adjust a setting.
c. Additional directional buttons – Press to move across the map or highlight an item on
the character input screen.
d. Center dial
– Turn the dial to highlight an item on the screen, adjust a setting or
adjust the map scale.
07 Information (INFO) – Press to display the vehicle, traffic (if so equipped), weather
(if so equipped) or voice recognition information.
18
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
1590747_14b_Armada_QRG_011614.indd 18
1/16/14 10:41 AM
08 DISPLAY – Press to access the display settings.
09 STATUS – Press multiple times to display audio information with either the air conditioner
status, fuel economy or navigation directions.
10 SETTING – Press to access the system settings.
11 BACK – Press to return to the previous screen. In a settings screen, this button can also
be used to apply the setting. In a character input screen, this button can also delete the
characters that have been entered.
12 VOICE – Press to hear the current voice guidance for a programmed route.
For more information, refer to your Navigation System Owner’s Manual.
DUAL HEAD RESTRAINT DVD SYSTEM
(if so equipped)
With this Dual Head Restraint DVD System you can
play video files via a DVD or CD, providing images and
sound both from the front and rear display screens.
You can also connect auxiliary devices such as video
games, camcorders or portable video players to the
auxiliary jacks 01 located on the back of the center
console. (Your device will be controlled through its
own control panel.)
04
Rear Auxiliary Mode allows rear seat passengers
to independently display different sources on
each screen.
01
Use the remote controller 02 provided with the
system to operate the rear display screens.
Use the headphones 03 , also provided with
the system, to listen to audio wirelessly and
independently. You may also connect your own
wired-headphones to the headphone jacks 04
located on the back of the center console.
03
02
For optimum performance, select the appropriate
headphone channel 05 that corresponds to the
headrest display being viewed directly in front of you.
To watch or control videos on the front display make sure the vehicle
is in the P (PARK) position and the parking brake is applied.
05
To reduce driver distraction, the wireless headphones will not operate
while located in the front seats and movies will not be shown on the
front display while the vehicle is in any drive position.
To access standard DVD controls on the front display while playing a
DVD on the rear display, press the DISC•AUX button on the audio
control panel while the vehicle is in the P (PARK) position and the parking brake is applied.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
1590747_14b_Armada_QRG_011614.indd 19
19
1/16/14 10:41 AM
SYSTEM GUIDE
HOMELINK
HOMELINK® UNIVERSAL TRANSCEIVER (if so equipped)
The HomeLink® Universal Transceiver can learn and consolidate the functions of up to 3
different hand-held transmitters, operating items such as garage doors, property gates,
outdoor and indoor lights or alarm systems.
To program the HomeLink® Universal Transceiver:
• Position the handheld transceiver 1-3 in (26-76 mm) away from the HomeLink surface,
keeping the HomeLink indicator light in view.
• Press and hold the desired HomeLink button and the handheld transmitter button
simultaneously until the HomeLink indicator light flashes slowly and then rapidly.
• Both buttons may be released when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the HomeLink button and observe the
indicator light:
• A solid, continuous light indicates the programing is complete and the HomeLink button
will activate your device.
• A blinking light that turns to a solid, continuous light after 2 seconds indicates additional
steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete the
programing process:
• At the receiver of the device that you are programing to the HomeLink button, press
and release the learn or smart button (the name may vary by manufacturer, but it is
usually located near where the hanging antenna wire is attached to the unit). You have
approximately 30 seconds to initiate the following step.
• Press and hold the programed HomeLink button for 2 seconds and release.
You may have to repeat the previous 2 steps up to 3 times to complete the programing
process. HomeLink should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink website at
www.homelink.com or call 1-800-355-3515.
20
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
1590747_14b_Armada_QRG_011614.indd 20
1/16/14 10:41 AM
MEMO
1590747_14b_Armada_QRG_011614.indd 21
1/16/14 10:41 AM
This Quick Reference Guide is intended to provide an overview of some of the unique features of your new vehicle. See your
Owner’s Manual, which contains important safety warnings and information about the operation and maintenance of your vehicle,
for complete details. NISSAN North America, Inc. reserves the right to make changes, at any time, without prior notice, in prices,
colors, materials, equipment, specifications, and models and to discontinue models or equipment. Due to continuous product
development and other pre- and post-production factors, actual vehicle, materials and specifications may vary. Some vehicles are
shown with optional equipment. See the actual vehicle for complete accuracy. Specifications, options and accessories may differ
in Hawaii, U.S. territories and other countries. For additional information on availability, options or accessories, see your NISSAN
dealer or contact NISSAN North America, Inc.
To view detailed instructional videos,
go to www.nissanownersinfo.mobi/2014/armada
or snap this barcode with an appropriate barcode reader.
Nissan, the Nissan Brand Symbol, Z and
Nissan model names are Nissan trademarks.
© 2014 Nissan North America, Inc.
QR14E TA60U1
Printing: February 2014 (25)
1590747_14b_Armada_QRG_011614.indd 2
1/16/14 10:40 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising