Jeep Classic Duo Pram 2007

Jeep Classic Duo Pram 2007
Jeep® Classic Duo
Instructions
by
WARNING
Please take a moment to read through these instructions
before you use your Jeep® Stroller.
Important Safety Information:
• Never leave your child unattended while in stroller.
• To prevent choking hazard, remove and discard all packing material
before using this product.
• Always use restraint system to keep child f rom standing u p or
falling out of the stroller. Use the harness at all times.
• Always balance the weight of the stroller evenly.
• Always lock the stroller open before allowing your child in or near
the stroller.
• Only use this stroller with a child weighing less than 20 kg.
• Put on all brakes whenever you park the stroller.
• Never use this stroller on stairways or escalators.
• Do not allow children to stand on seat or sit on footrest.
• This is not an exercise stroller. Do not use product while running,
jogging or participating in other athletic activities.
• Do not put child in basket.
• Do not carry e xtra children or use accessories other t han those
approved by the manufacturer.
The stroller should not be used near an open fire or exposed flame.
• Make sure children are clear of any moving parts if you adjust the
stroller, otherwise they may be injured.
• Do not put more than 4 kg in the basket.
Stroller Parts
Stroller Frame
Bumper Bar
Rear Wheels (2)
Toddler Seat Parts
Toy bar
Rocker/Toddler seat
Bumper bar
Canopy
How to Assemble Your Stroller
To Open Stroller
1
Remove a ny c ardboard i nserts
or plastic ties used t o protect
the product during shipment.
2
Release the locking latch.
3
Unfold, making sure both side
locks snap into place.
4
To Assemble Rear Wheels
1
Remove and discard p rotective
plastic s leeve from ends o f rear
axle assembly.
2
Position rear wheel o n leg of
stroller, and push u ntil spring
loaded buttons click into place.
3
Repeat for second side.
4
To r elease wheel, push o n the
centre button as shown and pull
wheel off.
To remove rear brake assembly:
Push in s pring buttons o n either side
of the brake assembly and pull off.
5
To Attach Bumper Bar
1
Place bumper bar onto metal
tubing over screw as shown.
2
Snap tab in place.
Repeat for second side.
1
To close canopy: Push on f ront
of canopy to move backwards.
2
To open canopy: Pull canopy
open to desired position.
To Adjust Canopy
6
How to Properly Use Your New Stroller
To Secure Child In Stroller
1
Lock f oot b rake t o keep s troller
from rolling. (see page 12)
2
Place child in stroller.
3
Hook shoulder straps to waist belt.
4
To fasten restrain system
buckles - push together. Be
sure both buckles are fastened
to secure child safely.
5
To unstrap restrain system
buckles - press tabs to release.
6
For proper fit, adjust sthoulder
straps and waist band as
shown.
7
To Adjust Shoulder Strap Height
1
Un-hook shoulder strap from
waist belt as shown.
2
PUll shoulder strap through the
webbing as shown.
3
Hook the shoulder straps to
waist belt as shown.
Repeat for second strap.
Note: For a secure fit, straps should
be at or above the child’s shoulder.
Adjust straps to a higher position as
your child grows.
8
To Recline Seat
1
RECLINE SEAT: Pull buckles
to desired recline as shown.
2
QUICK RECLINE: To recline
seat fully, release buckles as
shown.
3
RAISE SEAT: Make sure both
buckles are fasted.
Pull strap on both sides of
stroller to desired height.
9
To Operate Brakes
1
To lock brake: Push down on
brake bar to lock wheels.
2
To unlock brake: Lift up on
brake bar.
To Operate Front Swivel Wheel Lock
1
Unlock f ront swivel:P ull latch
located on the l eft hand s ide of
frame beneath the f olding latch
towards y ou u ntil button pops
out.
2
Lock f ront swivel : Release l atch
and the front wheel will lock into
place.
Please Note: On rough surfaces, lock
the wheel to keep straight. On smooth
surfaces, unlock to allow the wheel
to swivel.
10
To Fold Stroller
1
Lock brakes. (see page 12)
2
Close canopy. (see page 8)
3
Pull up latch on each side of
stroller as shown.
4
Push stroller down to fold.
5
Engage locking latch.
11
To Position Toddler Seat on Stroller
1
Remove the bumper bar from
the stroller.
Place the toddler seat tabs
onto the stroller frame making
sure that the tabs are placed
over the protruding screws.
2
Snap tabs in place.
Please note: If the seat is not
fixed properly onto the stroller
frame it could move forward
and become dangerous.
3
Pull back clip on footrest.
Place toddler seat bar into
clips and snap into place.
12
To Recline Toddler Seat
1
Pull handle up and pull
back on the toddler seat.
2
Adjust to desired position.
1
Push bumper bar onto the arms
of the toddler seat/rocker until
they click into place.
To Attach bumper bar
To remove bumper bar:
Push leavers in and slide off.
Please Note: We recommend
that the bumper bar remains
fixed while used as a rocker.
13
To Attach Canopy
1
Place the two ends of the canopy
into the slots in the rocker/toddler
seat and click into place.
To Remove Canopy: Push the
raised area in and pull the canopy
out of the slots.
To Attach toy bar
1
Push and click the ends of the toy
bar over the rocker/toddler seat
frame.
Please Note: Toy bar is not
designed to be used as a carry
handle.
14
There are many w ays to l ook a fter and p rotect y our Jeep ®
stroller. T he most i mportant is t o clean u p any spills o r food,
before it dries on the fabric.
As the covers are not designed to be easily taken off for washing,
(for safety reasons) t he easiest method t o clean i s, sponge
the surfaces with a m ild solution of w arm water liquid laundry
detergent. R inse w ell with c lean sponge and l eave t o dry out o f
direct sun.
Sand and S alt water should be r insed w ith a hose and w iped dry
to prolong the life of the wheels, axles and other moving parts.
Never use petroleum based l ubricants on y our s troller, the most
suitable lubricants are silicone based products.
Warranty
Jeep® i s a registered t rademark o f DaimlerChrysler Corporation,
and i s used under l icense b y Born W ith S tyle. ©DaimlerChrysler
Corporation 2007.
Born W ith S tyle w arrants this product t o be f ree of d efects i n
materials and w orkmanship as follows: F or a p eriod of ONE
YEAR f rom the date o f purchase, Born W ith S tyle w ill r epair
or replace, a t its option, t he d efective product. This w arranty is
given in addition to (and not in substitute for) applicable statutory
rights which you may have.
We sincerly thank you for purchasing this Born With Style product.
For further information visit: www.bornwithstyle.com.au
15
For all spare parts, repairs or warranty issues, please contact:
Karlisles
Phone:
Email:
Web:
1300 308 435
info@karlisles.com.au
www.karlisles.com.au
Replacement parts provided by local distributor due to accidental
damage or misuse will be charged accordingly.
To contact the manufacturer directly:
Born With Style
PO Box 789
Gladesville NSW 1675, Australia
Phone:
1300 855 337 or 02 9816 3837
Email:
info@bornwithstyle.com.au
Web:
www.bornwithstyle.com.au
This product meets and exceeds Australian Standard
AS/NZS 2088:2000
Personal Record Card
Born With Style recommends that you keep a record of important
information about your Jeep® s troller. P lease c omplete the
information in the space provided.
Model Number:
Date of Manufacture:
Date of Purchase:
16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising