BFGM USING A STEREO BLUETOOTH TRANSMITTER IN ORDER FOR THIS FUNCTION TO WORK A CELLULAR PHONE MUST BE PAIRED AND CONNECTED When listening to audio from a stereo Bluetooth receiver the audio will be interrupted (not paused) when a phone call comes in. Controlling your stereo Bluetooth transmitter via AVRCP: Play/ Pause – Not functional through the radio control. (Use the controls on your external device). Track Forward – Press the seek> button. Track Back – Press the Seek< button. USING THE STEERING WHEEL CONTROLS All other buttons on the steering wheel controls are defaulted to send the conversation to switch back to privacy mode (back to the cellular phone). PLAY/PAUSE SRCE ANSWER/ END/ IGNORE/ TRACK FWD & BACK ANSWER/ END - Press the track forward button. IGNORE - Press and hold the track forward button. TRACK FORWARD - Press the track forward button (A2DP/AVCRP). TRACK BACK - Press and hold the track forward button. TROUBLE SHOOTING NO AVRCP CONTROL Verify that the paired device supports AVRCP functionality. RANGE ISSUE Bluetooth standard range maxing out at 30 feet, may vary due to environment. DEVICE NOT FOUND BAD CALL QUALITY NO SOUND AUDIO DROP OUTS Delete all previous pairing attempts and try again. Make sure the cellular phone is within range of the module (30ft.). Make sure the signal reception of the cellular phone is strong. Make sure the module is on and paired to a transmitting device. Make sure the volume is adjusted correctly, check both the radio and the transmitting device, and other items within range of the module. REV.1 HANDS-FREE BLUETOOTH INTERFACE FOR SELECT 2006-UP GM VEHICLES Scosche’s BFGM Bluetooth Interface will allow you to wirelessly communicate with your Bluetooth enabled cellular phone and Stereo Bluetooth transmitters. The BFGM communicates directly with your factory radio allowing you direct control of hands-free, voice dialing, and A2DP functionality. These interfaces maintain the original integrity of important diagnostic and safety systems within the vehicle. For up-to-date applications or any Technical assistance with this product, call Scosche Tech support at (800) 621-3695 Ext 3. APPLICATION GUIDE CADILLAC 2007-08 Escalade, EXT, ESV GMC 2007-08 Denali 2007-08 Sierra (New Body Style) 2007-08 Yukon HUMMER 2007-08 H2 LIMITED WARRANTY Scosche Industries Inc. warrants this product to be free from defects in material and workmanship for a period of 90 days from purchase. This Scosche product is sold with the understanding that the purchaser has independently determined the suitability of this product. This warranty is offered to the original purchaser of the product only. This warranty does not cover the product if physically damaged, subject to negligence or misuse, abuse, alteration, accident, or an act of GOD. This warranty does not apply to product which has water or physically damaged by accident or which has been misused, disassembled or altered. The original dated sales slip or proof of purchase will establish warranty eligibility. If the product should prove defective within the warranty period, return the product with proof of purchase to Scosche Industries Inc. Scosche, at its option, will replace or repair the product free of charge and return the product postage paid. In no event shall Scosche Industries, Inc. be responsible for claims beyond the replacement value of the defective product, or in any way be liable or responsible for consequential or incidental damages. No express warranties and no implied warranties, whether for fitness or any particular use or otherwise, except as set forth above (which is made expressly in lieu of all other warranties) shall apply to products sold by Scosche. Scosche Industries cannot be held responsible for discrepancies/inconsistencies that may occur due to automotive manufacturing changes or option. QUICK START PRELIMINARY: Determine whether you have an XM module in the vehicle. Press the band button to see if the XM source displays on the screen of the radio. INSTALL Install the BFGM into your vehicle. See vehicle applications and find page number of your vehicle disassembly (See harness instruction for full disassembly). POWER THE MODULE With the unit installed, turn the ignition key to the on position to place the Bluefusion module into pairing mode. Press the BAND button multiple times to get to the XM source on the radio. From the XM source press and hold button, the screen displays “Bluefusion” when ready. SEEK Make sure both the transmitting device is at a good battery state. If the item in on low battery, please recharge. NOTE: Due to every phone having different software and functionality features, many phones may work different with the Bluetooth module of the BFGM. We recommend contacting the Scosche Technical Support at 1-800-621-3695 Ex.3 with any common or reoccurring issues. ALL CURRENT APPLICATIONS USE THE “BFGMLANXM” HARNESS CHEVROLET 2007-08 Avalanche 2007-08 Silverado (New Body Style) 2007-08 Suburban 2007 -08 Tahoe PAIR YOUR CELLULAR PHONE Set your cellular phone into pairing mode and search for a new device (See your phones owners’ manual for operation instructions). Once your cellular phone has searched for a new device select “BLUEFUSION” from the list. If prompted for a pass code enter “0000”. 4 PAIR YOUR CELLULAR PHONE Once the two devices have connected and paired, you will now be able to scroll through the menu functions of the BFGM. (See page 1-3 for Bluefusion operation). IMPORTANT DO NOT RETURN PRODUCT TO THE RETAILER IF YOU NEED ASSISTANCE OR REPLACEMENT PARTS ©2008 SCOSCHE INDUSTRIES, INC. HOURS MON-FRI 8AM-5:30 (PST) SATURDAY 8AM-2PM (PST) CALL US TOLL FREE 1-800-621-3695 X3 SWITCHING SOURCES QUICK BUTTONS These are the only buttons used for the interface. Multi-Function Knob TO SCROLL MENUS Seek Forward SEEK Please read and understand this entire manual before operating the interface. When a phone call is ended your radio will not automatically switch back to the original source you were previously on, this feature only works when previously on XM source. At this time we recommend using the BAND button to switch back to the original source you were previously on. NOTE: On specific Y91 (Premium BOSE) radio’s the auto source switching will switch back to the original source you were previously on, this feature works on any radio source. TO ANSWER/ SELECT Seek Back SEEK TO END/ PREVIOUS MENU OVERVIEW PHONE CALL OPERATION 3-PIN RADIO HARNESS INCOMING CALLS To answer an incoming call simply press the your vehicles speakers. MICROPHONE HARNESSES AM FM XM AUX 3:33 BLUEFUSION NAV AUDIO BLUEFUSION DEST MENU RET SEEK FAV FAV The 40s The 40s The 40s The 40s The 40s DVD SEEK dts FAV XM 1 Bluefusion 12:00 MENU EQ LOAD ALL CURRENT APPLICATIONS USE THE BFGM-LAN XM HARNESS. BAND CAT EJECT SEEK SEEK REV FWD button once. Call will now be heard through Hold & Accept – Places current call on hold and answers the second incoming call. By selecting the hold and accept menu you will have several options after answering the second call. 1. Swap Calls – This option toggles you between the two calls. 2. Conference Calls – This option allows you to have more than one party listen in on the call. 3. Release Hold – Releases and Ends the call originally placed on hold. End & Accept – Ends active call and answers second incoming call. AND NON-NAVIGATION RADIO i SEEK To answer a second incoming call press the SEEK button once and you will be prompted by on screen by a menu that gives you the following options: WORKS WITH BOTH NAVIGATION RADIO 24-Pin CD/ AUX PAIRING YOUR CELLULAR PHONE 1. Turn the key to the on position (II) to place the Bluefusion module into pairing mode. 2. Press the BAND button to get to the XM source on the radio, press and hold the seek< button and the screen will display “Bluefusion” when it is in pairing mode. 3. On your cellular phone, enter your Bluetooth menu and make your cellular phone search for a new device. The device name will be “BLUEFUSION” and if you are prompted for a pass code enter “0000”. 4. When the two devices are paired to each other, be sure to set the Bluefusion as a trusted device on your cellular phone. NOTE: When the ignition is turned off the call will automatically transfer to the headset. 12:51 pm While using other sources other than XM (Bluefusion) the interface will automatically switch to the XM source when you have an incoming phone call. The radio switches through the sources to find the XM source on the radio, some audio may bleed through while switching sources. Favorites NOTE: When a phone call is active and you are re-entering the vehicle, upon turning on the ignition the call will automatically be transfered to the vehicle speakers. Active call will no longer be active on the headset. To browse your recent incoming calls: 1. Scroll through the screen menu until you see the word “INCOMING”. 2. Press the seek> to enter the incoming calls menu. 3. Using the MFK to scroll through your incoming calls, when you see the number you wish to dial simply press the seek> to select that number. Call is now in progress. NOTE: For Privacy Mode simply turn the radio off or change source (to FM, AM, CD or AUX). OUTGOING CALLS To browse your outgoing calls: 1. Scroll through the screen menu until you see the word “OUTGOING”. 2. Press the seek> to enter the outgoing calls menu. 3. Using the MFK to scroll through your outgoing calls, when you see the number you wish to dial simply press the seek > to select that number. Call is now in progress. MISSED CALLS To browse your missed calls: 1. Scroll through the screen menu until you see the word “MISSED”. 2. Press the seek> to enter the missed calls menu. 3. Using the MFK to scroll through your missed calls, when you see the number you wish to dial simply press the seek > to select that number. Call is now in progress. VOICE DIAL - Cellular phone must have voice dial functionality in order for this to function. To enter voice dial: 1. Scroll through the screen menu until you see the word “VOICE DIAL”. 2. Press the seek> to enter the voice dial mode, wait to be prompted by your cellular phone, then say the name of the contact you wish to dial. NOTE: In the case where the voice dial is not recognizing the name of the contact, please make sure the voice dial feature is turned on. To make sure the voice dial feature is on press the seek> button twice and the radio’s screen will display on or off. Press seek> twice to switch from off to on.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project