Operating instructions LG LS50-A5A43U1

Operating instructions LG LS50-A5A43U1
You can read the recommendations in the user guide, the technical guide or the installation guide for LG LS50-A5A43U1. You'll
find the answers to all your questions on the LG LS50-A5A43U1 in the user manual (information, specifications, safety advice,
size, accessories, etc.). Detailed instructions for use are in the User's Guide.
User manual LG LS50-A5A43U1
User guide LG LS50-A5A43U1
Operating instructions LG LS50-A5A43U1
Instructions for use LG LS50-A5A43U1
Instruction manual LG LS50-A5A43U1
You're reading an excerpt. Click here to read official LG
LS50-A5A43U1 user guide
http://yourpdfguides.com/dref/1204664
Manual abstract:
..........
.....
.....
..........
.... 10 Connecting to an AC power source ......
.....
.....
..........
..........
.....
.....
..........
..........
11 Using the computer .....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
...... 12 Using the computer ....
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
.. @@@@@@@@18 For Australian Users ........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..... 19 Laser compliance statement .....
..........
.....
.....
..........
..........
.....
.....
..........
...... 20 Overview ....
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
. 21 Package contents ....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
21 Components (LM 40/50) .....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..... 23 Front view .....
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.... 23 Components (LS40/50) .
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..... Front view .....
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.... Rear view (LM 40/50, LS 40/50) .
.....
..........
..........
.....
.....
..........
..........
.....
.....
... Left view .......
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
.... Right view ......
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
... 25 25 26 27 28 Status indicators ..
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
... 29 Basics ..
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
........ 31 Using the battery pack ..
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
31 -1- Using the AC adapter ..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.... Connecting the AC adapter to an AC outlet (100~240V).
.....
..........
..........
.....
.....
. Opening and positioning the LCD panel.........
..........
.....
.....
..........
..........
.....
.....
. Power switch .........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
...... 34 34 35 35 Turning the power on and off ....
..........
.....
.....
..........
..........
.....
.....
..........
......... 36 Turning on the computer .
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
........ 36 Turning off the computer ..
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.. 40 Using Windows XP ...
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
Overview.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
...... Help and Support ....
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..... Windows XP desktop .....
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
Start menu ..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
........ Changing the look of the Start menu ..
..........
.....
.....
..........
..........
.....
.....
..........
. Changing the pinned items in the Start menu .........
.....
.....
..........
..........
.....
.....
.. Showing the recently used items on the Start menu ........
..........
.....
.....
..........
.... Control Panel ......
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
......... 42 42 43 44 45 45 45 45 46 Setting up Local Area Network (LAN) connections.
.....
.....
..........
..........
.....
.....
..... 47 Changing the Themes and Desktop background .....
..........
.....
.....
..........
..........
... 49 Using the Windows Classic Theme..
.....
..........
..........
.....
.....
..........
..........
.....
.....
49 Using a different theme ..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
. 49 Changing the desktop background ....
.....
..........
..........
.....
.....
..........
..........
.....
.. 50 Setting the Screen Saver ...
..........
..........
.....
.....
..........
..........
.....
.....
..........
...... 50 Taskbar....
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.... 51 Desktop cleanup.
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
51 Using the Power Options..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
51 Power Options Properties.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
......... 52 Power Options Properties.
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
... 53 Advanced tab..
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
... 54 Power Meter .......
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
......... 54 System Hibernation .
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..... 55 Attaching external devices .....
..........
.....
.....
..........
..........
.....
.....
..........
..........
.. Attaching a USB device ...
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
... Attaching a television using an S-Video port .......
.....
.....
..........
..........
.....
.....
...... Attaching an external monitor ....
..........
.....
.....
..........
..........
.....
.....
..........
........ Attaching a printer..
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
...... Using S/PDIF output connector ....
.....
.....
..........
..........
.....
.....
..........
..........
.....
.. -256 56 56 58 59 61 When listening to music as MP3...
..........
..........
.....
.....
..........
..........
.....
.....
....... 61 When enjoying DVD Player ...
..........
.....
.....
..........
..........
.....
.....
..........
..........
... 63 Attaching an IEEE 1394 device ..
.....
..........
..........
.....
.....
..........
..........
.....
.....
.... 63 Using the IrDA port......
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
. 64 About IrDA port.........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
... 64 Using IrDA port .......
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..... 64 Using Wireless LAN .....
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
.. 66 Connecting and using the wireless network ........
..........
.....
.....
..........
..........
.....
. 66 Using IP Operator ....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
67 Using Battery Miser.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.. 69 Input/Output...
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
. 71 Using the keyboard....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
... About the keyboard 14.1inch.
.....
..........
..........
.....
.....
..........
..........
.....
.....
..... About the keyboard 15 inch.....
..........
.....
.....
..........
..........
.....
.....
..........
........ Modifier and special function keys ..
.....
.....
..........
..........
.....
.....
..........
..........
.....
71 71 72 74 Hot keys .....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
...... 76 Using the touch pad....
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
.. Moving the pointer on the screen ........
..........
.....
.....
..........
..........
.....
.....
..........
Making the selection (Click) ..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
Double-click (Run) .....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
... Drag and drop..
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.. Using the scroll up/down function ...
..........
..........
.....
.....
..........
..........
.....
.....
.... 77 78 78 79 79 82 System Setup......
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
........ 83 Starting the system setup..
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
. 83 Keys used in the system setup ....
..........
..........
.....
.....
..........
..........
.....
.....
....... 83 Setting a password ...
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
.... 84 Setting a supervisor password ......
..........
.....
.....
..........
..........
.....
.....
..........
...... 85 Setting a user password ....
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
...... 86 Changing or removing the password....
..........
.....
.....
..........
..........
.....
.....
..........
87 Recovering the factory default settings ..........
.....
.....
..........
..........
.....
.....
..........
88 System Recovery..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
89 -3- Using Full Recovery ..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
...... 89 Driver re-installation ....
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
. 93 Storage/Memory.........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
94 Using the optical disk drive ..........
..........
.....
.....
..........
..........
.....
.....
..........
...... 94 Inserting a CD ....
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
......... 94 Removing a CD .
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
. 95 Playing an audio CD....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
....... 96 Using Windows Media Player ...
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
. 96 Using Power DVD .........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
97 Using an SD Memory Card / SONY Memory Stick..........
..........
.....
.....
..........
....... 99 Inserting an SD Memory Card / Memory Stick...
.....
.....
..........
..........
.....
.....
........ 99 Removing the SD Memory Card / Memory Stick ..
..........
.....
.....
..........
..........
.....
. 99 Installing memory ....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
...100 About memory ..
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
100 Before installing memory .....
..........
..........
.....
.....
..........
..........
.....
.....
..........
...100 Purchasing memory .......
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
........101 Installing memory ..
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
.....101 Features.....
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..... 104 Model .....
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
....104 Processor .
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
........104 Memory ..
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
.........104 BIOS ROM .
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
..104 Storage devices...
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
...104 External I/O Interfaces..
..........
..........
.....
.....
..........
..........
.....
.....
..........
.........105 Display .
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
.105 Sound.........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
.....105 Dimension .....
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
........mmended by LG. Using a battery pack of a different type may result in explosion.
Keep metallic objects, such as keys and clips, away from the battery pack. Objects that conduct electricity can short-circuit the battery pack and result in fire
and/or injuries. Keep the battery pack away from heat. There is a risk of explosion or fire. Do not short-circuit battery terminals.
There is a risk of explosion. Do not subject the battery pack to temperatures above 140 degrees F (60 deg may damage or break the LCD. Do not touch or
scratch the LCD with sharp objects. The LCD may be damaged. Be sure to turn off the computer before closing the LCD cover.
The computer may overheat, and be damaged or deformed. Do not exert excessive pressure on the LCD. LCD is made of glass, and an excessive force can
break the LCD. Follow the instructions in the user's guide. There is a risk of damage to the computer. Do not place objects into the PC Card slot. There is the
risk of electric shock or injury. - 13 - Upon completion of any service or repairs, ask service technician to perform safety checks. Ignoring safety checks may
result in electric shock or fire. Use the Wireless LAN at least 5m away from a microwave oven or plasma lamp.
When using the Wireless LAN near a plasma lamp, use the channel 11, 12, or 13. the connection may be unavailable or slow. Keep the computer away from
heat. The computer may deform and there is the risk of fire. When attaching an external device, make sure the connector from the device and the port on the
computer are of the same type. There is a risk of damage to the computer. Do not insert a damaged CD-ROM or floppy disk. There is a risk of damage to the
computer. - 14 - Upgrading the computer Warning Before disassembling the computer for upgraing purposes, turn off the power and remove the power cord,
phone line, and battery pack. There is the risk of electric shock or fire.
If you need to open the computer cover, contact the customer service for help. Keep screws and other small parts away from children. Children may choke on
a screw or other small part. If a child swallows a small part, receive a medical care. Caution Do not attempt to disassemble or modify the computer without
consulting customer service.
There is a risk of electric shock. Replace only with the parts approved by LG. There is a risk of fire and damage to the computer. Consult with the customer
service before connecting and using the computer with any non-LG product. There is a risk of damage to the computer.
- 15 - Carrying and storing the computer Caution Before moving the computer, turn the power off and remove all the cables. You may trip over the loose
cables and fall. When traveling on an airplane, follow the instruction by flight attendant. Using the computer on an airplane may result in an airline accident.
Do not travel with LCD monitor open. Do not expose your computer to the direct sunlight in a closed area such as inside a car. Prolonged exposure to high
temperatures may deform the computer and also result in fire. - 16 - Preventing data loss (handling hard disk drives) Caution Be cautious when handling the
hard disk drive. The hard disk drive is very delicate to any physical impact. Always make backups for your data.
LG is not responsible for the data lose caused by users. The data on the hard disk or the drive itself may be damaged in the following situations: 1. Exposure
to a physical shock during the disassembling or installing process. 2. The computer is reset (rebooted), for example by power outage, while the hard disk
drive is operating. 3. Exposure to virus. 4. The computer is turned off during operation. 5.
Exposure to a physical shock while the hard disk drive is operating. To prevent data loss due to hard disk drive damages, always backup your data. LG is not
responsible for the loss of data. - 17 - Ergonomic information Warning Adjust the display position to avoid glare or reflections from a direct ray of light. The
top of the display should be on or below the level of your eyes.
You're reading an excerpt. Click here to read official LG
LS50-A5A43U1 user guide
http://yourpdfguides.com/dref/1204664
Keep your head and neck in an upright position. Keep your forearms, wrists, and hands in a horizontal position. Adjust your chair to keep your arms and
hands in a comfortable position. Using the computer in the same position for a prolonged period of time may cause discomfort to your body. Take short
frequent breaks from working with your computer.
No more than 2 hours of computing per day is recommended. Stretch periodically to reduce muscular discomfort. Check the volume level Check if the volume
level is too high before using headphones. Do not use the headphones for a prolonged period of time. - 18 - For Australian Users Warning For safety reasons,
only connect equipment with a telecommunications compliance label. This includes customer equipment previously labelled or certified. - 19 - Laser
compliance statement An optical disk drive (device), such as a CD-ROM, CD-RW,DVD-ROM drive, which can be installed in this unit is a laser product. The
driver's classification label is on the surface of the drive as shown below. CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1 LASERLAITE
APPAREIL A LASER DE CLASSE 1 KLASS 1 LASER APPARAT The drive is certified by the manufacturer to comply with the requirements of the Department
of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class I laser products at the date of manufacture. In other
countries, the drive is certified to conform to the requirements of IEC825 and EN60825 for Class 1 laser products.
DANGER Do not open the optical disk drive unit: no user adjustments or serviceable parts are inside. Use of controls, adjustments, or the performance of
procedures other than those specified might result in hazardous radiation exposure. - 20 - Overview Package contents The following items are included in the
package. Match the items on this list with the items in the box. Some items may look different from the pictures. LM40 14.1 inch Notebook PC LM50 15 inch
Notebook PC LS40 14.1 inch Notebook PC LS50 15 inch Notebook PC - 21 - Note: Make sure you have the correct AC adapter before connecting it to the
computer. Installation guide Battery pack power cord / AC adapter Software installation CD Telephone cable Note: - Battery is consumables, so its capacity
and lifetime will decrease gradually as using time goes by. - Battery pack(9 cell) is optional.
- Below mentioned functions are not offered by each product *IEEE1394 / Wireless LAN / SD Memory card / S-Video port / IrDA port/ Memory Stick Caution
When cleaning your computer, use cleaning products manufactured specifically for computing equipment. Using abrasive chemicals, such as paint thinner,
benzene, or alcohol, may damage your computer. - 22 - Components (LM 40/50) Learning the components and their functions helps you use the computer
more easily and thoroughly. Front view LM40 14.1 inch Volume up button Volume down button Power switch Wireless LAN (option) LCD Power-Saving
mode switch Keyboard TouchPad button IrDA port (option) TouchPad Built-in Speakers - 23 - LM50 15 inch Volume up button Volume down button button
Power switch Wireless LAN (option) LCD Power-saving mode switch TouchPad Built-in speakers Keyboard TouchPad button IrDA port (option) Note:
Pressing the Volume up and down buttons at the same time mutes the sound.
- 24 - Components (LS40/50) Front view LS40 14.1 inch Volume up button Volume down button Power switch Wireless LAN (option) LCD Power-Saving
mode switch Keyboard TouchPad Built-in Speakers TouchPad button - 25 - LS50 15 inch Volume up button Volume down button Power switch Wireless LAN
(option) LCD Power-saving mode switch Keyboard TouchPad Built-in speakers Note: Pressing the Volume up and down buttons at the same time mutes the
sound. TouchPad button Rear view (LM 40/50, LS 40/50) Note: Some models may look different from the picture below. Modem port S-Video connector
(option) - 26 - LAN port Power jack Note: To open the display panel 1. Push the latch button to the right 1, 2.
and lift the LCD panel 2. 3. Adjust the slope of the display panel for a comfortable viewing angle. 1 2 2 Left view Fan louvers USB device port Security
keyhole Parallel port Monitor port Headphone jack/ S/PDIF jack Microphone jack - 27 - Security keyhole: User can attach a separately purchased chain lock
into the security keyhole and connect it to a fixed object to prevent a notebook theft. Note: A position of security keyhole can be different from the model type.
Right view IEEE 1394 port SD Memory Card /Memory Stick Slot Emergency eject hole PC Card slot PC Card eject button DVD Drive DVD drive eject button
USB port Emergency eject hole: Insert a thin and hard pin into this hole, and you can open the disc tray manually. Note: Below mentioned functions are not
offered by each product *IEEE1394 / Wireless LAN / SD Memory card / S-Video port / IrDA port Memory Stick Your computer has a built-in DVD-ROM, CDROM, or CD-RW/DVD-ROM combo drive depending on the model type. - 28 - Status indicators Note: Some models may look different from the picture below.
8 7 1 2 3 4 5 6 8 3 2 1 4 5 6 7 1.AC Power: Power indicator lights up when the power cord is connected to the computer.
- 29 - 2.Battery: Battery status indicator indicates the following status of the battery. Green: The computer is connected to an AC adaptor and is being
charged. Off: The battery is fully charged OR the computer is not connected to an AC Adapter. Blinking: The battery power is under 10% of its maximum
capacity. 3.Power: Power status indicator indicates the following status of the computer. Green: The computer is turned on. Off: The computer is turned off
or is in hibernation mode. Blinking: The computer is in standby mode.
4.Drive in use: Drive in use indicator lights up when data is being written to or read from the hard disk or optical disk drive. 5.Num lock: Num lock indicator
lights up when the combination of the Fn and Num lock key is pressed. When this indicator lights up, you can use the embedded numeric keys.
(To use the numeric keys, you must enable the Internal Keypad setting under the Advanced menu in the BIOS Setup Utility) 6.Caps lock: Caps lock indicator
lights up when the Caps lock key is pressed. When this indicator lights up, you can type capital letters without pressing the Shift key. 7-8. Wireless activity
indicator: Wireless activity indicator indicates the following.
Off: The wireless card does not have the power or RF is off. Blinking: The wireless client is not associated with the network.Slow blinking (3-4 seconds
interval): the wireless card powered on and attempting to connect. Fast blinking: The wireless card transmitting and/or receiving data by the rate depending
on blinking speed. - 30 - Basics This section describes how to use the basic features of your computer.
You're reading an excerpt. Click here to read official LG
LS50-A5A43U1 user guide
http://yourpdfguides.com/dref/1204664
Read this section before using the computer. Using the battery pack The battery pack must be fully charged before first use. Note: Battery is consumables, so
its capacity and lifetime will decrease gradually as using time goes by. Caution You must turn off the computer before replacing the battery pack. Use only the
battery pack that comes with the computer.
1. Turn the computer over so that the battery slot faces up. - 31 - 2. Place the battery pack in the battery slot, and align the two protrusions on the battery
pack with the two slits on the side of the battery slot. 3. Gently push the battery pack into the slot until it clicks. The battery pack is inserted. You can lock the
battery pack in place by pushing the left battery latch in the direction shown above. If you hear a click, the battery pack is locked in. 4.
Connect the AC adapter and open the LCD panel. Start charging the battery. @@If the battery is fully charged, the indicator is turned off. @@- 32 - 5.
@@Note: The battery pack has the following characteristics.
@@@@@@@@To use the battery pack safely and effectively, 1. Do not short-circuit the battery pack. 2. Keep the battery pack away from heat or fire. 3.
Store the battery pack at room temperature. (32 ~140 °F/0 ~ 60 °C) 4. Do not disassemble the battery pack. 5. Do not expose the battery pack to water. 6.
Keep the battery pack away from children. @@@@@@The AC adapter can be used with a 100~240V AC power source. Use only the AC adapter that comes
with your computer. @@Overloading an electrical outlet may result in fire or electric shock.
Do not touch the power cord or plug with wet hands. Doing so may result in electric shock. Connect the power cord to the adapter, and then plug the power
cord into an AC outlet. - 34 - Opening and positioning the LCD panel Push the latch button in the direction of the arrow1, and open the display panel 2.
@@@@Push the latch button to the right1 and open the display panel2. 1 2 2. Press the power switch. 2 - 36 - 3. @@4. @@@@5.
@@Click [Next]. 6. `The End User License Agreement' appears on the screen. @@`What's your computer's name?' appears on the screen. @@`Ready to
register with Microsoft?' appears on the screen.
Select `No, not at this time' and click [Next]. 9. `Who will use this computer?' appears on the screen. Type the names of the users and click [Next]. - 38 - 10.
`Thank you!' appears on the screen. @@@@Turning off the computer this way may damage the system. @@@@@@@@@@@@@@@@@@Window
Buttons 1. Minimize 2. Maximize 3. @@Click [Start]->[Help and Support]. LG The following window appears. You can search for useful Help and Support
information. You can connect to the Internet and ask for assistance online. @@@@2.
[Start] menu [Start menu] shows everything you need to start working in the Windows XP environment. 3.Taskbar Taskbar shows programs that are currently
open and running. 4.Taskbar icons and clock Taskbar icons show and let you configure ongoing activities such as battery power status, display properties,
LAN settings, etc. 5.Recycle Bin - 44 - Put your unused items and files in the Recycle Bin. Right-click the Recycle Bin and select [Empty Recycle Bin] to
permanently delete the items inside the Recycle Bin. Start menu LG Pinned items My computer shows the drive and network information for your computer
Control Panel lets you change the settings in your computer Recently used items Changing the look of the Start menu Right click [Start] button and select
[Properties]. In the Start menu tab, choose from either Start menu or Classic Start menu.
Click [OK] to apply the new setting. Changing the pinned items in the Start menu Right-click the item you want to pin it to the Start menu. Select [Pin To Start
Menu]. The item is pinned at the top of the Start menu. Showing the recently used items on the Start menu Right-click on [Start] button and click [Properties].
In [Start Menu] tab, select [Start menu] and click [Customize]. In [Advanced] tab, check [List my most recently opened documents] and click [OK]. In
Taskbar and Start Menu Properties window, click [Apply]->[OK]. If you click [Start] button the next time, recently used items appear on the Start Menu. - 45
- Control Panel The Windows XP Control Panel can display items in either Category View or Classic View.
Switch to Classic View Category View Classic View - 46 - Setting up Local Area Network (LAN) connections Local Area Network (LAN) connection provides
high-speed network connection for your home or company. When using Wireless LAN, refer to "Using Wireless LAN" (page 65). Attach a LAN cable to the
Ethernet (LAN) connector. Click [Start]->[Control Panel]->[Switch to Classic View]-> [Network Connections]. Right-click a Local Area Connection and
select [Properties]. - 47 - If the following window appears, click [General] tab and 1. Check if 3COM 3C920 Integrated Fast Ethernet Controller is installed
in the computer 2. Then, check Internet Protocol, and 3. Click on [Properties] 1 2 3 Click on [General] tab, and Select [Obtain an IP address automatically]
Click [Ok] when Internet protocol (TCP/IP) setting is completed. Note: Ask your network administrator for the appropriate IP settings.
When using LAN or Wireless LAN, refer to "Using IP Operator" (page 67). IP Operator is useful to access to network everywhere by notebook. - 48 Changing the Themes and Desktop background Using the Windows Classic Theme Click [Start]->[Control Panel]->[Switch to Classic View]->[Display].
Click [Themes] tab Select [Windows Classic] from the [Theme] drop down menu. Using a different theme 1. Click [Start]->[Control Panel]->[Switch to
Classic View]->[Display]. 2. Click [Themes] tab 3. Select another theme from the [Theme] drop down menu. Note: In Appearance tab, you can click
[Advanced] button and change the color scheme, font size, and windows and button styles.
In Themes tab, you can change the overall appearance of the desktop. If there are more than one user using the computer, each user can apply different theme
and desktop appearances. - 49 - Changing the desktop background Click [Start]->[Control Panel]->[Switch to Classic View]->[Display]. Click [Desktop]
tab. (OR you can right click on the mouse while in desktop background.
@@@@@@@@@@@@1. @@2. Click [Desktop] tab. 3. @@Click [Start]->[Control Panel]->[Switch to Classic View].
@@@@@@In System standby mode, you cannot save your work. Be sure to save your work before entering System standby mode. When the computer enters
System hibernation, the computer saves all your work in the hard disk and turns off the computer. Caution If the computer enters System standby or
hibernation mode while playing a computer game, a serious error may occur. Be sure to quit the computer game before entering a power-saving mode. - 52 Power Options Properties Click [Alarms] tab. Check [Low battery alarm] and [Critical battery alarm], and move the sliders to set the power level to activate
low battery alarm and critical battery alarm.
You're reading an excerpt. Click here to read official LG
LS50-A5A43U1 user guide
http://yourpdfguides.com/dref/1204664
You can be notified with Sound alarm or Display message. You can also set the alarm action such as putting the computer into System standby mode or
System hibernation mode. You can also run a specific program when the alarm goes off.
- 53 - Advanced tab In Options, you can set the computer to prompt for password when computer resumes from standby. You can also set the computer to
enter a power-saving mode when closing the display panel, pressing the power switch or the combination of Fn+F4. Power Meter You can click the Power
Meter icon on the Taskbar to check the power level of your computer. - 54 - System Hibernation In Hibernate tab, you can enable or disable System
hibernation mode and check the disk space needed for hibernation. Caution Do not remove the battery pack when the AC adapter is not connected to the
computer. If you keep using the computer while low on the battery power, you may lose the data when the battery power goes out. If you are notified of low
battery power, save your data and connect the AC adapter, or turn off the computer and change the battery pack. - 55 - Attaching external devices Attaching a
USB device USB mouse (not included) You can connect keyboard, hub, digital camera and other devices that support USB. Attaching a television using an SVideo port Note: Below mentioned functions are not offered by each product *IEEE1394 / Wireless LAN / SD Memory card / S-Video port / IrDA port/
Memory Stick 1. Attach the S-Video cable from a TV to the S-Video connector on the computer Connecting to system Connecting to TV (Works only with TV
that has S-Video port) - 56 - 2.
Click [Start]->[Control Panel] -> [Display] -> [Settings] tab -> [Advanced]. 3. In [Display]tab, select TV as the main display - 57 - 4. You can also switch
the main display to and from TV and LCD by pressing the combination of Fn+F7. Note: You cannot use switch the main display while playing a game.
You cannot display a movie or game on a TV and LCD at the same time. Attaching an external monitor Note: Turn off the computer before attaching an
external monitor. An external VGA connector should be no wider than 17mm otherwise it will not fit in. External monitor (not included) Monitor toggle
function (switch the monitor by short-cut keys) After install the external monitor to the notebook PC, use Fn + F7 to switch the main monitor to LCD only,
monitor only, and LCD + monitor both, in sequence. - 58 - Attaching a printer Note: Use a standard parallel port connector that should be 16mm wide.
Connectors wider than 17mm will not fit in. Printer (not included) Attach a printer cable to the computer, then click [Start] from the Taskbar and [Printers
and Faxes]. LG - 59 - If the following window appears on the screen, click [Add a printer] In the Add Printer Wizard, follow the instruction to set up a
printer. When the Add Printer Wizard completes setting up the printer, the new printer appears on the Printers and Faxes window. - 60 - Warning Do not
overload an electrical outlet with connections to multiple devices. Overloading an electrical outlet may result in fire or electric shock. Do not touch the power
cord or plug with wet hands. Doing so may result in electric shock Using S/PDIF output connector Using S/PDIF(Sony/Philips Digital Interface) output
connector you can enjoy the digital sound by connecting S/PDIF supporting amplifier to the S/PDIF output connector. You must have the following items (A/V
receiver, components of digital amplifier) to enjoy the digital 5.1 channel sound.
Digital output of this product is provided by S/PDIF output connector. For your enjoyment, you must have below mentioned environment. A DVD title
recorded by digital 5.1 channel sound. A DVD player supported by digital 5.1 channel sound (For example, POWER DVD XP 4.0 or newer) A/V receiver or
digital amplifier to support the digital 5.1 channel sound. When listening to music as MP3 Double click to open Volume Control from the toolbar. Go to
[Options] -> [Advanced Controls] -> [Advanced] - 61 - Check [Digital output] checkbox in the volume control.
Enjoy music after connecting A/V receiver, Digital amplifier, MD with cable. - 62 - When enjoying DVD Player Follow the same procedure as above. Set
DVD payer program setting in compliance with digital output (Refer to [Help] on DVD player). Connect A/V receiver, or digital amplifier to S/PDIF by
cable. Enjoy DVD 5.
1 channel. Note: 1. Check Digital Output only when using S/PDIF supporting amplifier. When it is checked, you will not hear any sound with regular
speakers. 2.
Notebook PC doesn't support analogue 5.1 channel amplifier. Use A/V receiver, or 5.1 channel supporting digital input 3. When enjoying 5.1 channel on
Power DVD, set up S/PDIF. 4. To support 5.1 channel is not available when S/PDIF doesn't set up on amplifier environment. 5.
Check [Digital Output] when you use S/PDIF amplifier. 6. Uncheck Digital Output from the advanced control and restart the program after finishing.
Attaching an IEEE 1394 device Digital Camera (Purchased separately) You can connect external hard disk drive, external CD-RW, digital camera, video
camcorder and other devices that support IEEE1394. Note: Below mentioned functions are not offered by each product *IEEE1394 / Wireless LAN / SD
Memory card / S-Video port / IrDA port Memory Stick - 63 - Using the IrDA port Your computer supports IrDA (Infrared Data Association) standard for
infrared communication. About IrDA port Range: 1m Beam angle: +-15 Data transmission speed: 4.0 Mbps Your computer has an IrDA V3.0 Fast Infrared
port allowing the data transmission speed of Serial Infrared (115.2Kbps) and Fast Infrared (4Mbps). Transmission speed depends on programs and devices
used in IrDA communication.
IrDA communication programs General serial communication programs can be used, but programs specifically designed for IrDA communication is
recommended. Your computer is configured to use COM port for IrDA communication in FIR mode. Using IrDA port Your computer can communicate with
another IrDA standard compatible device supporting FIR data communication. IrDA communication provides useful wireless communication between your
computer and other computer or devices. The following section describes how to establish IrDA communication between 2 computers.
Make sure Wireless Link program is installed in your computer. 1. Turn on the computer. 2. Click Start button and right-click My computer to select
Properties.
3. On Hardware tab, click Device Manager. 4. Right-click IrDA Fast Infrared Port and select Properties. 5. Click Advanced tab, and configure the device. 6.
Align 2 computers so that their IrDA ports point to each other. - 64 - The distance and the beam angle between the ports must be less than 1m and smaller
than +-15 degrees respectively. Remove any obstruction between the ports.
7. When the connection is established, Wireless Link program starts automatically.
You're reading an excerpt. Click here to read official LG
LS50-A5A43U1 user guide
http://yourpdfguides.com/dref/1204664
Wireless Link icon appears on the taskbar, and shortcut to Wireless link is created on the desktop. Shortcut to Wireless link Wireless link icon 8. Double-click
Wireless link icon on the taskbar. Wireless Link windows opens. 9. Select the file that you want to send, and click Send. Sending and receiving computers
show the following windows. Sender Receiver - 65 - 10.
Click Yes to start a data transfer. The data transfer is complete. Note: The default directory for the received data is C:\Documents and Settings\ User
Name\Desktop. To change the default directory, open Wireless Link and click Properties, and then choose a new default directory. Using Wireless LAN You
can use Wireless LAN to connect to the network and use the Internet in your home and office.
You can share files and folders over the network without the attaching network cables to the computer. It is composed of Wireless LAN on Windows when
shipping. Note: Below mentioned functions are not offered by each product *IEEE1394 / Wireless LAN / SD Memory card / S-Video port/ IrDA port/ Memory
Stick When using LAN or Wireless LAN, refer to "Using IP Operator" (page 66). IP Operator is useful to access to network everywhere by notebook.
Connecting and using the wireless network Right-click the Wireless network icon on the Taskbar and select [View available wireless network].
- 66 - Select AP(Access Point) you want to connect to and type necessary information. Click [Connect]. If you place the mouse pointer on the Wireless
network icon on the Taskbar, you can see the status of the wireless network. Using IP Operator IP Operator is useful to access to network everywhere by
notebook. User access to network at the several places (Home, Office, and Vendor etc.) can save and modify the network environment (IP address, Domain,
Workgroup). For more detailed information, refer to [IP Operator]. Double click [IP Operator] icon on Desktop System tray. - 67 - If the following window
appears, select LAN or High-Speed Internet at the drop down menu and type the computer name you use. Type the name is appropriate at [Profile List] after
making a decision whether a user belonging to [Domain], or a member of [Work Group].
Choose one of setting options as below. When setting [Obtain an IP address automatically], - IP address, Subnet mask, Default Gateway windows are
changed the color as grey automatically. When setting [Use the following IP address] Insert IP address, Subnet mask, Default Gateway window. Then, insert
DNS Server. Click the [Profile Save] button when finishing inserting items in [Profile List] Note: When setting [Obtaining an IP address automatically], it is
unavailable to insert IP address, Subnet mask, and Default gateway. When pressing [Profile Apply], no items appear at [Profile List]. If a user needs to apply
the specific item, select one of items at [Profile List], and click [Profile Apply]. - 68 - Using Battery Miser Battery Miser is the program to manage energy
saving function makes the battery of notebook computer maximum. When using Battery Miser, it is available to use both original power management functions
of Windows and the advanced power management functions of battery miser. For more detailed information, refer to [About Battery Miser] Double click
[Battery Miser] icon on Desktop System tray.
Battery Miser main screen appears as below. Power scheme: The group that manages the power to reduce power consumption of computer peripheral units. 69 - Battery alarm: If the battery power gets down to low alarm, critical alarm, user can define the option for alarm is working. Note: When pressing the keys
Fn + F8, it keeps unused sound device power management(Sound device is always ON). When pressing one more, it return to the original set point.
When pressing the keys Fn + F9, it keeps unused Monitor power management(Monitor is always ON). When pressing one more, it return to the original set
point. - 70 - Input/Output Using the keyboard The keyboard is used for entering text and commands in the computer. About the keyboard 14.1inch The
keyboard is composed of character, number, and other special function keys.
Function keys: Function keys enable you to perform different operations depending on the operating system and application program you use. Hot keys: Hot
keys (shortcuts) are used in conjunction with Fn key to provide shortcuts for some of the predefined operations, such as entering power-saving mode. Cursor
control keys: You can move the cursor in the direction of the arrows. - 71 - Editing keys: You can move the cursor to the beginning or end of the current line,
or up and down the screen. About the keyboard 15 inch The keyboard is composed of character, number, and other special function keys. Function keys:
Function keys enable you to perform different operations depending on the operating system and application program you use. Hot keys: Hot keys (shortcuts)
are used in conjunction with Fn key to provide shortcuts for some of the predefined operations, such as entering power-saving mode. Cursor control keys: You
can move the cursor in the direction of the arrows. Editing keys: You can move the cursor to the beginning or end of the current line, or - 72 - up and down
the screen. Character and number keys: consist of character keys, number keys, special character keys, and spacebar.
Spacebar is used for creating a space between characters. Embedded numeric keys: You can press the combination of Fn and ScrLk keys to enable the
embedded numeric keypad. Num Lock indicator lights up and enables you to use the embedded numeric keypad shown below. You can press the combination
of Fn and ScrLk keys again to disable the embedded numeric keys. (To use the numeric keys, you must set the Advanced -> Internal Keypad setting to Enabled
in the BIOS Setup Utility.) - 73 - Caution Do not spill water, juice, coffee, etc on the keyboard as it may damage the computer and cause an electric shock.
Note: In the middle of entering characters, if numbers are entered instead of characters, press the combination of Shift and ScrLk to disable the embedded
numeric keys. Modifier and special function keys 4 3 2 1 5 7 6 Shift key: Hold Shift key down and press another key to enter the upper case letter for the key.
Caps Lock key: Press Caps Lock key to lock the keyboard in the upper case position. When the Caps Lock indicator lights up, you can press another key in
combination with Shift to enter the lower case letter for the key.
Esc key: Use Esc key to quit programs or cancel a operation in a program. - 74 - PrtSc (Print Screen) key: Press PrtSc key to take the snapshot of the entire
area visible on your screen and store it in the clipboard. Enter key: Press Enter key to enter a command or to end a line. Shortcut menu key: Press Shortcut
menu key to view shortcuts for the current program. (Shortcut menu key works the same as the right-clicking the mouse button) Windows(R) key: Press
Windows key to view the Start menu.
You're reading an excerpt. Click here to read official LG
LS50-A5A43U1 user guide
http://yourpdfguides.com/dref/1204664
LG Note: You can lock the keyboard in the upper/lower case position by pressing Caps Lock key. Caps Lock indicator is lighted up in upper case position.
You can use the combination of Shift and a character key to enter its upper/lower case letter. - 75 - Hot keys The following Hot keys provide you with
shortcuts to operations, such as adjusting the brightness of the computer display. Fn+F4: Force the computer to enter power-saving mode.
(ex: system standby and hibernation) Fn+F5: Press the combination once to disable the touch pad, and press again to enable the touch pad. (The touch pad
initialization takes 1~2 seconds, so wait for the initialization to end before using the touch pad) Fn+F6: Wireless LAN Enable/Disable Toggle Fn+F7: When
the computer is attached to an external monitor, you can change the display output location with Fn+F7 combination. You can switch to and from the three
types of display modes, LCD display only, the external monitor only, or both at the same time. Fn+Home: The computer display becomes brighter. Fn+End:
The computer display becomes darker. Fn+F8: Enbale/disable Auto Sound power management (battery mode only). Refer to Battery Miser Help. Fn+F9:
Enable/disable Auto Brightness control. Refer to Battery Miser Help. Fn+F12: Maximum power-saving mode.
(when OSD is installed) - 76 - Using the touch pad 1 2 3 The touch pad can be used with a mouse at the same time. It has a scroll button, which functions
similar to a scroll wheel on a mouse. 1. Touch pad: used to move the pointer. 2. Left button: used to select or click items. 3. Right button: functions similar to
the right button on a mouse. Caution Guidelines on using the touch pad Do not touch the touch pad with a sharp or pointed object as doing so may damage
the touch pad. Do not remove the cover sheet of the touch pad as doing so may damage the touch pad.
Do not use the touch pad with two fingers, wearing gloves, or wet hand as it may not function correctly. Using the touch pad with a dirty or oily finger may
damage the touch pad. Do not exert too much pressure on the touch pad as doing so may result in injuries to your finger or wrist. - 77 - Moving the pointer on
the screen Gently place your finger on the touch pad and slide it in the direction in which you want the pointer to move. Making the selection (Click) To click
a button, quickly press and release the left button.
You can click the left button or gently tap the touch pad once to select an item on a menu or an icon on the screen, or position the cursor in a document. OR 78 - Double-click (Run) To double-click a button, quickly press and release the left button twice.You can also tap the touch pad twice to get the same result.
To launch an application, you can select and double-click the .exe file or the program icon.
Drag and drop To drag an object, select and move the object by clicking and holding the left button and sliding the finger across the touch pad without
releasing the button. To drop the object you have just dragged, release the left button. You can use drag and drop to move files from one location to another.
For example, if you want to place a file in the recycle bin, place the pointer above the file you want to move, press the left button and hold, slide your finger
across the touch pad to move the file and release the left button above the recycle bin. - 79 - . Drag: Move the icon without releasing the left button Drop:
Release the left button above the recycle bin. ClickLock: enables you to select text or drag a file without having to continuously hold down the mouse button
or touch pad button. Follow the instruction below to enable ClickLock. If ClickLock is enabled, you can hold down the mouse button or touch pad button for a
moment and then release it, and still get the same effect as continuously holding down the button. You can drag an object with ClickLock enabled and press
again to release the button and drop the object.
Click and open the Mouse Properties window. On the Buttons tab, under ClickLock, select Turn on ClickLock check box. - 80 - Click Settings and adjust how
long you need to hold down a mouse or touch pad button to enable ClickLock, and then Select OK. - 81 - Using the scroll up/down function Your computer
supports scroll function. When using scroll function, mouse cursor at the arrow does not move. Only the scroll function will move. You can use the scroll
up/down function by pressing Fn + direction key. In a program window with a scroll bar, you can move up and down the windows using Fn + direction key.
When you scroll a window using the scroll up/down function, the pointer on the screen does not move - 82 - System Setup The system setup saves your
computer's hardware configurations in CMOS RAM. The system setup provides you with information, such as the size and type of your hard disk, size of the
installed memory, date, and time.
Starting the system setup Setting a password. (Page 83) Changing or removing the password. (Page 86) Recovering the factory default settings. (Page 87)
Caution Do not change the system setup arbitrarily. Incorrect system setup may result in errors while using the computer.
The menu and default factory settings of the BIOS Setup Utility may look different from this manual. They may have been changed to improve the performance
of the system. Keys used in the system setup Enter: Select the current item. Esc: Close the current window or move to the previous window. CursorControl
Keys: Move up, down, left, and right.
+ -: Increase and decrease the value. Page Up: Move to the first item. Page Down: Move to the last item. F10: Save and exit the system setup. - 83 - Note:
Cursor control keys (arrow keys) move the cursor up, down, to the left and right. Turn on the computer. When LG logo appears on the screen, press F2. The
BIOS Setup Utility window appears. Setting a password If you want to protect the system setup from an unauthorized user, follow the instructions below to set
a password. You can set a password in the BIOS Setup Utility program.
Caution If you forget the password, you cannot gain access to your system. Make sure you write down the password in a safe place only you can refer to in
case you forget the password. - 84 - Setting a supervisor password A password protects your computer from unauthorized users. The factory default setup
does not have a password. A supervisor password prevents unauthorized users from changing the system setup. Start the BIOS Setup Utility. Use arrow keys
to select Set Supervisor Password under Security menu, and then press Enter. Note: You can use a supervisor password to gain access and change items in
the BIOS Setup Utility, and select Power on Boot. We recommend to use a user password if someone else has to use the computer. If the following message
appears, enter a new password and press Enter.
A password must be consisted of character A~Z and numbers 0~9, and have the maximum length of 8.
You're reading an excerpt. Click here to read official LG
LS50-A5A43U1 user guide
http://yourpdfguides.com/dref/1204664
If the following message appears, press Enter. - 85 - Press F10 to save the new settings. If the following message appears, select Yes and press Enter to
restart the computer. Setting a user password A user password is a secondary compared to a supervisor password.
You must set a supervisor password in order to set a power-on password. Start the BIOS Setup Utility and use arrow keys to select Security menu. Use arrow
keys to select Set User Password and press Enter. Note: A power-on password gives limited access for changing the settings in the BIOS Setup Utility
compared to a supervisor password. If the following message appears, enter a new password and then press Enter.
A password must be consisted of character A~Z and numbers 0~9, and have the maximum length of 8. - 86 - If the following message appears, press Enter.
Press F10 to save the new settings. If the following message appears, select Yes and press Enter to restart the computer. Changing or removing the password
Start the BIOS Setup Utility, enter your password, and then press Enter. To change the password, follow the instruction on Setting a password. To remove the
password, follow the instructions below. Use arrow keys to select Security menu, and select a password you want to remove, and then press Enter. If the
following message appears, enter the current password in the bracket next to Enter Current Password, and then press Enter. Press Enter without entering a
password in the brackets next to Enter New Password and Confirm New Password.
If the following message appears, press Enter. Press F10 to save the new settings. If the following message appears, select Yes and press Enter to restart the
computer. - 87 - Recovering the factory default settings If a user accidentally modifies the system setup, follow the instruction below to recover the factory
default settings. Start the BIOS Setup Utility, and use arrow keys to select Exit. Use arrow keys to select Load Setup Defaults, and press Enter. If the following
message appears, select Yes and press Enter to recover the factory default settings. Press F10 to save the new settings. If the following message appears,
select Yes and press Enter to restart the computer. - 88 - System Recovery System Recovery offers to format the hard disk as shipping status of the product.
User must make backup files to minimize a risk of losing data. Windows CD is provided with the product that offers system recovery contracted by Microsoft.
Using Full Recovery To recover hard disk completely, you must make backup for all software and data on the computer. If Windows installation is complete,
you must fill out "Windows user Registration information" as the first time to buy the product. Press F11 with appearing preload image on the screen.
2. If the following screen appears, select one of items that works. - 89 - 3. Select [Full Recovery without Format], or [Full Recovery after format]. * In the
case of selecting [Full Recovery without Format].
- 90 - [Recovering factory default] appears. * In the case of selecting [Full Recovery after format] Click [Start Recovery] . - 91 - "Formatting to NTFS"
appears. When starting [Full Recovery], next procedures appears on the screen. If the following screen appears after restarting system, fill out Windows user
registration information. When clicking [Finish], the system returns to normal. - 92 - Driver re-installation 1. Turn on the computer and go to [Start]-[All
Programs]-[LG GILJABI]. 2. Select the device driver you want to install.
3. Follow the instructions to complete the installation. Some device drivers require you to restart the computer after the installation. - 93 - Storage/Memory
Using the optical disk drive Different model types provide different optical disk drives. (Some models have CD-ROM drives and others have CD-RW/DVDROM combo drives) Inserting a CD Turn on the computer, and press the eject button on the CD-ROM drive. Place the CD in the middle of the tray. (Label on
the CD must face upward) - 94 - Push the tray into the CD-ROM drive. Note: When you use the CD-ROM or CD-RW/DVD-ROM drive, place your computer
on a flat surface. The drive may not function correctly on an uneven surface. Your computer has a CD-ROM drive with the speed of 24X or faster; therefore,
the drive may rattle when you first insert a CD.
Be careful not to scratch the surface of a CD-ROM or CD-RW/DVD-ROM disk. Do not clean a CD-ROM or CD-RW/DVD-ROM disk with abrasive
chemicals, such as Benzene or Paint thinner. Do not drop or bump a CD-ROM or CD-RW/DVD-ROM disk. @@2. 3.
4. Press the eject button on the CD-ROM drive to eject the disk tray. Lift the CD in the middle of the disk tray. Place the CD in its protective case. @@@@If
you have a DVD drive, you can play a DVD.
@@Starting Windows Media Player 1 Turn on the computer. Press the eject button on the drive to open the disk tray, and then insert an audio CD and close
the tray. Select the Windows Media Player and click OK. Windows Media Player starts playing the audio CD. (If you select another audio CD program, that
program will play the CD instead of Windows Media Player) Starting Windows Media Player 2 Press Start -> All Programs -> Accessories -> Entertainment
-> Windows Media Player. When Windows Media Player opens, press Open under File menu, and then select an audio or video file you want to play. - 96 Using Power DVD 1. Insert DVD title in the DVD-COMBO drive, and close the tray. When the following window opens, select Play DVD Play and click [Ok]
2. @@Set the preference and click [Ok].
@@Power DVD will now play. @@@@If you delete the DVD title and play it again, you will also receive the preference window. You can change the region
counter only 5 times. After the 5th change, it is not possible to change. Be cautious when you try to change the regional code. Do not open the DVD tray and
remove the DVD title while it is still playing. It may damage the system or the DVD title. - 98 - Using an SD Memory Card / SONY Memory Stick Your
computer can read from and write to an SD Memory Card / Memory Stick. Note: Photo images may look different from the actual product. Inserting an SD
Memory Card / Memory Stick Turn on the computer, and place the SD Memory Card / Memory Stick in the SD Memory Card slot.
Push the SD Memory Card / Memory Stick into the slot until it clicks. Removing the SD Memory Card / Memory Stick 1. Press the SD Memory Card / Memory
Stick with the tip of your finger. 2. The SD Memory Card / Memory Stick ejects.
Note: Below mentioned functions are not offered by each product *IEEE1394 / Wireless LAN / SD Memory card / S-Video port / IrDA port/ Memory Stick - 99
- Installing memory When you are using the computer, you may want to increase the memory capacity. About memory Your computer uses DDR (Double Data
Rate) SDRAM SO-DIMM (Dual InLine Memory Module) with 200 pins. Each memory socket can support a memory module from 64MB to 1024MB, and the
maximum memory capacity of the computer is 2048MB.
You're reading an excerpt. Click here to read official LG
LS50-A5A43U1 user guide
http://yourpdfguides.com/dref/1204664
Before installing memory When installing or removing the memory modules, be careful not to expose them to the static electricity as it can damage the
modules. Make sure the type of memory installed in your computer is the same as the memory you are about to install.
Note: Use only the correct type of memory module (DDR SDRAM using 2.5V). Different models of computer can use different memory modules. DDR memory
has higher data-transfer rate and different shape compared to the typical memory. DDR SDRAM SDRAM - 100 - Caution Your computer supports
PC2700/DDR SDRAM SO-DIMM 333MHz/266MHz/200MHz with FSB Frequency of 400MHz. Warning Before disassembling the computer for upgraing
purposes, turn off the power and remove the power cord, phone line, and battery pack. There is the risk of electric shock or fire. If you need to open the
computer cover, contact the customer service for help. Purchasing memory Be sure to buy the correct type of memory modules for your computer. Type:
PC2700 (200 pin DDR SDRAM SO-DIMM) Speed: 333MHz (166MHz X2),266MHz (133MHz X2), 200MHz (100MHz X2) Size: 128MB, 256MB, 512MB,
1024MB Installing memory Main board configuration, memory socket, and memory module may look different in different models of computer.
Loosen the screw at the bottom of the computer, and remove the memory slot cover. - 101 - Note: Before removing the cover, shut down your computer,
remove AC adapter and battery pack, and detach any device or cable that are attached to the computer. Use the notch on the memory to make sure the
memory aligns with the socket, and then inserts the memory into the socket at an angle of approximately 30 degrees. Note: Push down the memory until the
latch firmly secures the memory on the socket. Push down the memory until you hear a click. - 102 - Caution Use only the memory module sold by LG. Using
other memory modules can damage your computer. Close the cover and tighten the screw. After the installation, reboot the computer. If you see an error
message regarding memory capacity, click F2 to enter the BIOS Setup Utility and save the settings.
Note: When rebooting the computer, make sure the size of installed memory is correct. If different, re-install the memory module. - 103 - Features Model
LM40/50, LS40/50 Processor Dothan Migration Note: The CPU cannot be replaced or upgraded by the user. The computer is equipped with a different CPU
depending on the model type. Memory Built-in: 256MB DDR SDRAM SO-DIMM Maximum: 1024MB on each slot and 2048MB combined Memory Type:
DDR SDRAM SO-DIMM (128MB, 256MB, 512MB, and 1024MB) BIOS ROM ROM: 8Mbit Storage devices 2.
5-inch hard disk drive (The capacity of the hard disk drive is different depending on the model type.) PC Card slot SD Memory Card slot / Memory Stick
Optical drive (DVD combo, DVD-ROM drive or DVD RW) - 104 - Note: The specification for the optical drive depends on the model type) External I/O
Interfaces External monitor portr 25-pin parallel port PC Card slot Microphone jack Speaker/Headphone jack S/PDIF IrDA port 3 Universal Serial Bus
(USB) devices RJ11 telephone port RJ45 Ethernet port IEEE 1394 port S-Video port Display ATI Mobility Radeon 9200, 9600 or 9700 Graphics Controller
4XAGP Video Memory: 32MB or 64MB XGA (1024X768) for 14.1 inch, SXGA+ for 15 inch. Note: the resolution and/or type of Graphics Controller are
different depending on the model type. Sound ANALOG DEVICES AC'97 SoundMAX Codec (AD1981A) Dimension 331(W) X 274(D) X 24.
3~32.1(H) mm LAN 3COM 3c920 RJ45 Ethernet connector Modem AMBIT T60M283.13 (MDC Card) / RJ11 Telephone connector To reduce the risk of fire,
use only No.26 AWG or thicker telephone cable. - 105 - Power specification AC Adapter (Free Voltage) Input: AC 100 ~ 240V, 1.6A, 50 ~ 60Hz Output: DC
18.5V, 3.5A, 65W Note: Use the correct adaptor for your computer. Battery Pack (Li-Ion) DC 11.1V, 4400mAh (6-cell) Charging time Less than 3 hours
(6-cell) or 4 hours (9-cell) with the power off in room temperature (9.
6 ~ 40 °C/ 49.28 ~104 °F) Less than 32 hours with the power off in low temperature (0 ~ 9.6 °C/ 32 ~ 49.28 °F) Note: The battery cannot be charged below 0
degrees C(32 °F). The temperature indicated above is the temperature inside the battery pack; the actual temperature may be different. Battery Life More
than 5hours (6-cell) (Battery Mark(TM) V4.0.1) Backup (standby) battery RTC battery Ni-MH Coin 3V 60mm Recommended battery: CR2032 manufactured
by Sony or equivalent type. - 106 - Operating environment Operating 10 ~ 35 °C(50 ~ 95 °F), 20 ~ 80% relative humidity Non-operating -10 ~ 60 °C(14 ~
140 °F), 10 ~ 80% relative humidity - 107 - .
You're reading an excerpt. Click here to read official LG
LS50-A5A43U1 user guide
http://yourpdfguides.com/dref/1204664
Powered by TCPDF (www.tcpdf.org)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising