Operating instructions PANASONIC SC-HT05

Operating instructions PANASONIC SC-HT05
You can read the recommendations in the user guide, the technical guide or the installation guide for PANASONIC SC-HT05.
You'll find the answers to all your questions on the PANASONIC SC-HT05 in the user manual (information, specifications, safety
advice, size, accessories, etc.). Detailed instructions for use are in the User's Guide.
User manual PANASONIC SC-HT05
User guide PANASONIC SC-HT05
Operating instructions PANASONIC SC-HT05
Instructions for use PANASONIC SC-HT05
Instruction manual PANASONIC SC-HT05
You're reading an excerpt. Click here to read official PANASONIC
SC-HT05 user guide
http://yourpdfguides.com/dref/195506
Manual abstract:
..........
.....
.....
..........
..........
.....
... 2 Supplied accessories ..
..........
..........
.....
.....
..........
.. 3 Dear customer Thank you for purchasing this product. @@Please keep this manual for future reference. SC-HT07 is used in the illustrations unless
otherwise mentioned. @@@@14 The radio.....
.....
.....
..........
..........
.....
.....
..........
........ 18 Other functions ..
.....
.....
..........
..........
.....
.....
..........
19 Using the VCR2 terminals (for SC-HT07)..........
. 22 Making a recording....
.....
..........
..........
.....
.....
....... 22 The RESET function ...
..........
.....
.....
..........
..........
. 22 Remote control operation guide ....
.....
..........
..... 23 Advance setup .....
.....
.....
..........
..........
.....
.....
........ 26 Reference Specifications ..
..........
.....
.....
..........
..........
.....
.....
.. @@27 Troubleshooting guide ........
..........
.....
.. @@@@A 5-ampere fuse is fitted in this plug. @@Check for the ASTA mark or the BSI mark on the body of the fuse. If the plug contains a removable fuse
cover you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer.
CAUTION! Safety precautions Placement Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive
vibration. These conditions can damage the cabinet and other components, thereby shortening the unit's service life. Do not place heavy items on the unit.
Voltage Do not use high voltage power sources. This can overload the unit and cause a fire. Do not use a DC power source. Check the source carefully when
setting the unit up on a ship or other place where DC is used. Before use AC mains lead protection Ensure the AC mains lead is connected correctly and not
damaged.
Poor connection and lead damage can cause fire or electric shock. Do not pull, bend, or place heavy items on the lead. Grasp the plug firmly when
unplugging the lead. Pulling the AC mains lead can cause electric shock. Do not handle the plug with wet hands. This can cause electric shock. IF THE
FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG
CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY
13AMPERE SOCKET. If a new plug is to be fitted please observe the wiring code as stated below. If in any doubt please consult a qualified electrician.
Foreign matter Do not let metal objects fall inside the unit. This can cause electric shock or malfunction. Do not let liquids get into the unit. This can cause
electric shock or malfunction. If this occurs, immediately disconnect the unit from the power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain flammable gases which can ignite if sprayed into the unit. IMPORTANT The wires in this mains
lead are coloured in accordance with the following code: Blue: Neutral, Brown: Live. As these colours may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows: The wire which is coloured Blue must be connected to the terminal which is marked with the letter
N or coloured Black or Blue. The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Brown or
Red.
Service Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered
in these operating instructions occurs, disconnect the AC mains lead and contact your dealer or an authorized service center. Electric shock or damage to the
unit can occur if the unit is repaired, disassembled or reconstructed by unqualified persons. Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time. WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE
LETTER E, BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN/YELLOW. THIS PLUG IS NOT WATERPROOFKEEP DRY. Before use Remove
the connector cover. CAUTION! Do not place anything on top of this unit or block the heat radiation vents in any way. In particular, do not place tape decks
or CD/DVD players on this unit as heat radiated from it can damage your software. How to replace the fuse The location of the fuse differ according to the
type of AC mains plug (figures A and B).
Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug. 1. Open the fuse cover with a
screwdriver. Figure A Figure B Fuse cover 2. Replace the fuse and close or attach the fuse cover. Figure A RQT7384 Figure B Fuse (5 ampere) Fuse (5
ampere) 2 System SC-HT07 SA-HT07 SB-FS927 SB-PC927 SB-WA07 SC-HT05 SA-HT05 SB-PF725 SB-PS725 SB-PC725 SB-WA05 CAUTION! · DO NOT
INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. · DO NOT OBSTRUCT THE UNIT'S VENTILATION OPENINGS WITH
NEWSPAPERS,TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.
· DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT. · DISPOSE OF BATTERIES IN AN
ENVIRONMENTALLY FRIENDLY MANNER. Main unit Front speakers Surround speakers Center speaker Subwoofer Supplied accessories Please check and
identify the supplied accessories. AC mains lead For United Kingdom For Australia and New Zealand For other areas WARNING: TO REDUCE THE RISK
OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. This product may receive radio interference
caused by mobile telephones during use.
If such interference is apparent, please increase separation between the product and the mobile telephone. The socket outlet shall be installed near the
equipment and easily accessible or the mains plug or an appliance coupler shall remain readily operable. (For continental Europe, the United Kingdom,
Australia, and New Zealand) (RJA0053-3X) (K2CJ2DA00010) (RJA0019-2X) Power plug adapter (RJP1SG04-H) (For areas except continental Europe, the
United Kingdom, Australia, and New Zealand) System cable (K1HA25HA0001) (RSA0007-L) FM indoor antenna AM loop antenna (N1DAAAA00002) THIS
UNIT IS INTENDED FOR USE IN MODERATE CLIMATES. (For other areas) Remote control transmitter SC-HT07 (EUR7722KE0) SC-HT05
(EUR7722040) THIS UNIT IS INTENDED FOR USE IN TROPICAL CLIMATES. For main unit Marking sign is located on bottom of the unit.
For the United Kingdom and Republic of Ireland Batteries Speaker cable(s) (x 2) SC-HT07 (REE1203A) (4 m x 1) SC-HT05 (REE1203A) (4 m x 3)
(REE1203C) (10 m x 2) xxxxxx xxx xxxxxx xxx xxxxxx xxx xxxxxx xxx xxxxxx xxx www.panasonic.co.uk (for UK customers only) · Order accessory and
consumable items for your product with ease and confidence by telephoning our Customer Care Centre MonFriday 9:00am-5:30pm. (Excluding public
holidays.) · Or go on line through our Internet Accessory ordering application.
You're reading an excerpt. Click here to read official PANASONIC
SC-HT05 user guide
http://yourpdfguides.com/dref/195506
· Most major credit and debit cards accepted. · All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd. · It couldn't
be simpler! Customer Care Centre For UK customers: 08705 357357 For Republic of Ireland customers: 01 289 8333 Technical Support For UK customers:
0870 1 505610 This Technical Support Hot Line number is for Panasonic PC software related products only. For Republic of Ireland, please use the
Customer Care Centre number listed above for all enquiries.
For all other product related enquiries, please use the Customer Care Centre numbers listed above. 1 2 xxxxxx xxx 2 3 xxxxxx xxx 3 4 xxxxxx xxx 4 5 xxxxxx
xxx 5 xxxxxx xxx xxxxxx xxx xxxxxx xxx xxxxxx xxx xxxxxx xxx 1 2 3 4 5 Antenna plug adapter (For the United Kingdom) SC-HT07 Speaker stands Stand bases
Use the numbers indicated in parentheses when asking for replacement parts. RQT7384 Screws (large and small) 5 xxxxxx xxx 4 xxxxxx xxx 3 xxxxxx xxx 2
xxxxxx xxx 1 xxxxxx xxx Sticker sheet 1 xxxxxx xxx (RQCA1029) (K1YZ02000013) (x 4) (RYQ0463A-S) (x 4) (RYQ0470-S) (XSN5+10FN) (x 8) (XSS6+14FZ)
(x 8) Before use 3 Step 1 Speaker setup (for SC-HT07) Front and surround speaker assembly · To prevent damage or scratches, lay a soft cloth and perform
assembly on it. · For assembly, use a Phillips-head screwdriver. 1 Step 1 Attach the pipe to the bases. 1 Thread the speaker cable through the base. 3 Secure
the pipe to the base. Large screws (included) Speaker setup (for SC-HT07) Groove Thread the speaker cable through here. Ensure the screws are securely
fastened by lightly tightening the left and right side screws alternately until fully tightened. (The heads of the screws protrude slightly even if you have fully
tightened them.
) Insert the pipe while slightly pulling on the speaker cable. The supplied stands are specially designed for attachment to Panasonic SB-FS927 front speakers
and surround speakers. Only use as indicated in this setup. 2 Insert the pipe. 2 1 Attach the stand to the speaker.
Ensure the stand is fastened on straight by lightly tightening the top and bottom screws alternately until fully tightened. · There is no difference between the
right and left speakers and stands. Small screws (included) For your reference You can enjoy good acoustics by adjusting the height of the front speaker with
the height of the television so the center positions of both are approximately the same. It is usually better to make the surround speakers a little higher.
RQT7384 4 You can also attach to the upper rear of the speaker.
When attached to the upper rear, you can adjust the height of the speakers between 625 mm and 796 mm. When attached to the lower rear, you can adjust the
height of the speakers between 968 mm and 1138 mm. (Speaker height adjustment è procedure 3) Supplied accessories Speaker stands Stand bases Screws
(large and small) (x 4) (x 4) (x 8) (x 8) 3 Adjust the speaker height. e.g., With the stand attached to the lower rear of the speaker 1 4 Connect the speaker
cables. 1 Copper Connect the speaker cables. 2 Press the speaker cable into the groove. Silver If there is any excess cable, thread it from the opening near the
top of the pipe while pulling it from the bottom of the base. 5 Fasten the speaker cable to the base.
1 2 Press the speaker cable and thread between the hooks. Fit the speaker cable into the base cover groove as far as possible. Preventing the speakers from
falling over Attach screw eyes (not included) to secure the speakers to a wall (diagram on the right). · Obtain the screws appropriate to the walls and pillars
to which the they are going to be fastened. · Consult with a qualified xxx 4 5 xxxxxx xxx 5 SC-HT05 (4 m x 3) (10 m x 2) xxxxxx xxx xxxxxx xxx xxxxxx xxx
xxxxxx xxx xxxxxx xxx 1 2 3 4 5 3 Connect the speaker cables to the subwoofer. Subwoofer SC-HT07 SC-HT05 Copper Silver FRONT (L) 1 4 SURROUND (R)
FRONT (R) 2 FRONT (6 ) SURROUND CENTER (6 ) (6 ) 3 SURROUND (L) Copper Silver 2 R 5 Note CENTER Never short-circuit positive (+) and negative
() speaker wires. 1 L 4 R 3 L 5 Other speaker setup options Attaching to a wall SC-HT05 SC-HT07 SC-HT05 5 mm, Pitch 0.8 mm 60 mm 150 mm 30 - 35 mm
230 mm Fitting optional speaker stands 7.5 -9.5 mm 8 - 11 mm Wall or pillar Plate thickness +7 to 10 mm Speaker stands (not included) Screw (not included)
· The wall or pillar on which the speakers are to be attached should ance inlet Connector SC-HT07 (For areas other than continental Europe and the United
Kingdom) S-VIDEO S-Video cable (not included) S-VIDEO OUT MONITOR OUT TV IN IN DVR / VCR1 IN DVD DVD player TV or monitor Used to
connect to the S-VIDEO IN terminal on a television.
S-VIDEO IN Used to connect to the S-VIDEO OUT terminal on a DVD player. Approx. 6 mm RQT7384 * Q Link (registered trademark of Panasonic) DATA
LOGIC (registered trademark of Metz) Easy Link (registered trademark of Philips) Megalogic (registered trademark of Grundig) SMARTLINK (registered
trademark of Sony) Power plug adapter (included) (For areas other than continental Europe, the United Kingdom, Australia, and New Zealand) If the power
plug does not fit your socket, use this adapter. Home theater connections 9 21-pin scart cable (not included) AV1 (TV OUT): Connect to the 21-pin scart (IN)
terminal on a television if you have connected equipment to AV2 (DVD IN) or AV3 (DVR/VCR1 IN). This unit must be on to output audio/video signals to the
television.
AV2 (DVD IN): Connect to the 21-pin scart (OUT) terminal on a DVD player. Change the AV output setting for DVD to "SCART" (è page 22). AV3
(DVR/VCR1 IN): Connect to the 21-pin scart (OUT) terminal on a DVD recorder or VCR. Change the AV output setting for VCR to "SCART" (è page 22).
For Q Link* to work, connect to this terminal.
Use Aim at the sensor, avoiding obstacles, at a maximum range of 7 m directly in front of the unit. Step 2 · Insert so the poles (+ and ) match those in the
remote control. · Do not use rechargeable type batteries. Step 3 Other connections Antennas For best reception FM outdoor antenna (not included) ·
Disconnect the FM indoor antenna. · The antenna should be installed by a competent technician. FM outdoor antenna FM indoor antenna (included)
Adhesive tape Fix the other end of the antenna where reception is best. AM loop antenna (included) Click! White Red Black 75 LOOP EXT 75 LOOP EXT CD
L L LOOP ANT GND TAPE L DVR / VCR1 L TV L DVD / DVD 6CH L CENTER MONITOR OUT FM ANT AM TV IN ANT Step 3 FM ANT AM ANT TO SBWA07 R R 1 2 LOOP ANT GND R R 75 coaxial cable R R A IN REC(OUT) PLAY(IN) 3 OUT IN AUDIO IN FRONT SURROUND SUBWOOFER For United
Kingdom Other connections 2 Antenna plug adaptor (included) OUT IN DVR / VCR1 VIDEO 75 IN DVD FM ANT 1 Keep the antenna cord away from DVD
players and other cords.
You're reading an excerpt. Click here to read official PANASONIC
SC-HT05 user guide
http://yourpdfguides.com/dref/195506
DVD recorder or VCR · Do not bend the optical fiber cable. 75 LOOP EXT CD L L LOOP ANT GND TAPE DVR / VCR1 L L TV L DVD / DVD 6CH L
CENTER TV MONITOR OUT IN AV1 (TV OUT) AV2 (DVD IN) FM ANT AM ANT TO SB-WA07 R R R R R R A IN REC(OUT) PLAY(IN) OUT IN AUDIO IN
FRONT SURROUND SUBWOOFER OUT IN DVR / VCR1 VIDEO IN DVD (TV) IN OPT 1 (DVR) IN (DVD) IN OPT 2 COAXIAL DIGITAL IN AV3
(DVR/VCR1 IN) Stereo phono cables (not included) AUDIO OUT AUDIO IN Video connection cables (not included) VIDEO OUT VIDEO IN DVD recorder
or VCR RQT7384 SC-HT07 the United Kingdom) S-Video cable (not included) S-VIDEO MONITOR OUT TV IN IN DVR / VCR1 IN DVD (For areas other
than continental Europe and S-VIDEO OUT Used to connect to the S-VIDEO OUT terminal on a DVD recorder or VCR. Optical fiber cable (not included)
Used to connect to the DIGITAL OPTICAL OUT terminal on a DVD recorder to input audio digital signals.
10 Supplied accessories FM indoor antenna AM loop antenna Antenna plug adapter (x 1) (x 1) (x 1) For United Kingdom TV (Input source) · Do not bend the
optical fiber cable. Optical fiber cable (not included) AV2 (DVD IN) Used to connect to the DIGITAL OPTICAL OUT terminal on a television to input audio
digital AV3 (DVR/VCR1 IN) signals. 75 LOOP EXT CD L L LOOP ANT GND TAPE L DVR / VCR1 L TV L DVD / DVD 6CH L CENTER TV MONITOR OUT
IN AV1 (TV OUT) FM ANT AM ANT TO SB-WA07 R R R R R R A IN REC(OUT) PLAY(IN) OUT IN AUDIO IN FRONT SURROUND SUBWOOFER OUT IN
DVR / VCR1 VIDEO IN DVD (TV) IN OPT 1 (DVR) IN (DVD) IN OPT 2 COAXIAL DIGITAL IN Stereo phono cable (not included) Video connection cables
(not included) SC-HT07 Europe and the United Kingdom) S-Video cable (not included) S-VIDEO MONITOR OUT TV IN IN DVR / VCR1 IN DVD (For areas
other than continental TV AUDIO OUT VIDEO OUT VIDEO IN Used to connect to the S-VIDEO OUT S-VIDEO terminal on a OUT television. Cassette deck
75 LOOP EXT CD L L SC-HT07 SC-HT07 LOOP ANT GND TAPE L DVR / VCR1 L TV L DVD / DVD 6CH L CENTER TV MONITOR OUT IN AV1 (TV
OUT) AV2 (DVD IN) TO SB-WA07 R R R R R R A IN REC(OUT) PLAY(IN) OUT IN AUDIO IN FRONT SURROUND SUBWOOFER OUT IN DVR / VCR1
VIDEO IN DVD (TV) IN OPT 1 (DVR) IN (DVD) IN OPT 2 COAXIAL DIGITAL IN AV3 (DVR/VCR1 IN) Stereo phono cables (not included) PLAY (OUT)
REC (IN) Cassette deck CD player SC-HT07 SC-HT07 75 LOOP EXT L CD L LOOP ANT GND TAPE L DVR / VCR1 L TV L DVD / DVD 6CH L CENTER
TV MONITOR OUT IN FM ANT AM ANT TO SB-WA07 R R R R R R A IN REC(OUT) PLAY(IN) OUT IN AUDIO IN FRONT SURROUND SUBWOOFER
OUT IN DVR / VCR1 VIDEO IN DVD Optical fiber cable or coaxial (not included) AV1 (TV OUT) AV2 (DVD IN) Used to connect to the DIGITAL OUT
terminal on a CD player to input audio digital signals. (TV) IN (DVR) IN (DVD) IN AV3 setting (D-INPUT(DVR/VCR1 IN) è page 22) OPT 1 OPT 2
COAXIAL DIGITAL IN CD player Stereo phono cable (not included) AUDIO OUT Game machine or other AV equipment LOOP ANT GND SC-HT05 SCHT07 75 LOOP EXT GAME/AUX DVR / VCR TV DVD / DVD 6CH CENTER TV MONITOR OUT GAME/AUX IN IN FM ANT AM ANT TO SB-WA05 A L R
IN OUT IN IN AUDIO FRONT SURROUND SUBWOOFER OUT IN DVR / VCR VIDEO IN DVD (TV) IN OPT 1 AV1 (TV OUT) AV2 (DVD IN) (DVR) IN
(DVD) IN OPT 2 COAXIAL DIGITAL IN AV3 (DVR/VCR IN) Stereo phono cable (not included) AUDIO OUT VIDEO OUT Game machine RQT7384 Video
connection cable (not included) Other connections 11 FM ANT AM ANT Step 3 Step 4 Settings Adjusting speaker output level RECEIVER AV SYSTEM ^ ^
DVD ANALOG 6CH VCR TV DVD DVD RECORDER DVD/HDD RECORDER CD 1 4 7 DIRECT TUNING DISC u/t 2 5 8 -/-- 3 6 9 > 10 CH VOLUME 0 y/i
= TUNER/BAND MUTING g TOP MENU h q MENU DIRECT NAVIGATOR PLAY LIST ENTER DISPLAY TV VOL TV/AV INPUT MODE TONE/ BALANCE
STEREO/ 2CH MIX RETURN TV VOL DIMMER SUBWOOFER CENTER FOCUS TEST SLEEP /L LEVEL SFC /R EFFECT %PL MUSIC AV/MOVIE OFF
Step 4 1 RECEIVER 2 ^ TEST 3 VOLUME 4 LEVEL 5 /L /R 6 TEST Settings Switch on. Output the signal. Adjust the main volume. Select the speaker channel.
Adjust the level. Repeat steps 4 and 5 Stop the test signal.
C (center), RS (right surround) and LS (left surround) can be adjusted between 10 dB and +10 dB, with 0 dB being the level of the front speakers. Adjust
center and surround output to the same apparent level of the front speakers. For SW (subwoofer), you can select "- - -" so there is no output, "MIN" for
minimum output, a level between 1 and 19, or "MAX" for maximum output. Adjust subwoofer output so it is balanced with the front speakers. Subwoofer
output is easily influenced by the source.
You can also change its level while playing something for better effect (è page 20). 12 RQT7384 Basic operations NAVIGATOR ENTER TOP MENU MULTI
CONTROL PREV / VOLUME DISPLAY TV VOL TV/AV DIMMER SUBWOOFER RETURN TV VOL CENTER FOCUS ENTER NEXT / ^ 8 SFC INPUT
SELECTOR MUSIC AV/MOVE TUNE TUNE VIDEO IN L AUDIO IN R VCR 2 RETURN DOWN UP PHONES INPUT MODE TONE/ BALANCE STEREO/
2CH MIX TEST SLEEP /L LEVEL SFC /R EFFECT %PL 1 ^ 8 2 INPUT SELECTOR 3 Start play of the source. TV The unit sets the sound mode to suit the
input signal. 4 VOLUME DOWN UP MUSIC AV/MOVIE OFF Switch on. Select input.
SC-HT07 TUNER CD DVD MUSIC AV/MOVIE SFC %PL TAPE VCR2 DVR/VCR1 SC-HT05 TUNER DVD TV GAME/AUX DVR/VCR Adjust the volume.
STEREO/ 2CH MIX OFF Sound modes Adding surround effects to stereo sources Using Dolby Pro Logic II Dolby Pro Logic II processor works not only on
sources recorded with Dolby Surround, but also on any stereo source. The following modes are available when using Dolby Pro Logic II. You can make fine
surround settings when in the MUSIC or PANORAMA mode. (è page 20) Using the Sound Field Control (SFC) Enjoy an enhanced sound experience with
greater presence and spread by using these SFC modes with PCM or analog stereo sources. Choose from the following modes. You can adjust SFC effects. (è
page 21) MOVIE Use this mode when playing movie software, especially videotapes, recorded in Dolby Surround. %PL MUSIC Adds surround effects to
stereo sources. @@@@@@@@· To cancel Press [STEREO/2CH MIX, OFF].
@@DRAMA For dramas and other material where dialog is important. @@SPORTS To make you feel like you were in the stadium. MUSICAL For musicals
and other material where music is important.
You're reading an excerpt. Click here to read official PANASONIC
SC-HT05 user guide
http://yourpdfguides.com/dref/195506
GAME Enjoy gaming with more impact. @@@@@@@@They do not light when input is analog. @@M: Flashes or lights during presetting. MONO: You
have switched to monaural mode with [FM MODE] to improve reception. ST: A stereo FM broadcast is tuned. Operations DIGITAL INPUT LCR TUNED M
RDS MONO ST PS PTY C.FOCUS SLEEP %DIGITAL %PRO LOGIC LS S RS LFE 2CH MIX 100Hz SURROUND SFC kHz MHz 1kHz 10kHz [%DIGITAL,
dts, %PRO LOGIC II] Light to indicate the source's input signal and decoding format used.
General display Shows the input mode, radio frequency, and other general information. RQT7384 [kHz, MHz] [RDS, PS, PTY] (For continental Europe and
the United Kingdom) Frequency unit indicators kHz: AM, or PCM sampling frequency MHz: FM 14 Shows the current RDS display mode. [MULTI
CONTROL] For presetting radio stations and various other settings. (è page 17) [VOLUME] Volume control. [PHONES] Headphone jack Plug type: 3.
5 mm stereo · Sound does not come from the speakers if you connect headphones. · Avoid listening for prolonged periods of time to prevent hearing damage.
UP PHONES TOP MENU MULTI CONTROL PREV / VOLUME ENTER NEXT / RETURN DOWN Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. @@@@@@@@@@@@@@Be noted that this will cancel your
setting.
· Press [TOP MENU] to return to the Top menu. @@@@You cannot adjust the tone if DVD ANALOG 6CH is selected. @@@@Preparation: Tune to the
station you want to preset. MULTI CONTROL 1. Press [TUNER/BAND] to select "FM" or "AM". 2. Press [DISC, DIRECT TUNING]. 3. Press the numbered
buttons to enter the frequency. e.
g. @@@@Press [TOP MENU]. 2. Press [< , >] to select "TUNER". è [ENTER] 3. Press [< , >] to select "MEMORY". è [ENTER] 4. Press [< , >] to select
a channel. @@MULTI CONTROL Selecting channels Remote control Press [2, CH, 1]. or Press the numbered buttons.
For channels 1 to 9, press the corresponding number. For channels 10 or over, press [ 10, -/--], then the two digits. e.g. @@MULTI CONTROL 1.
Press [TOP MENU]. 2. Press [< , >] to select "TUNER". è [ENTER] 3. Press [< , >] to select "FM MODE".
è [ENTER] 4. Press [< , >] to select "MONO". @@The AM stations the unit can receive are preset in channels 21 to 30. @@MULTI CONTROL 1. Press
[TOP MENU]. 2. Press [< , >] to select "TUNER". è [ENTER] 3. Press [< , >] to select "AUTO MEM". @@@@@@Press [TOP MENU].
2. Press [< , >] to select "TUNER". è [ENTER] ("TUNING" lights.) è [ENTER] 3. Press [< , >] to select "PRESET". è [ENTER] Select "MANUAL" to
cancel. Main unit 4. @@"RDS" lights while RDS signals are being received. RDS displays may not be available if reception is poor. MULTI CONTROL
RETURN 1.
Press [TOP MENU]. 2. Press [< , >] to select "TUNER". è [ENTER] 3. Press [< , >] to select "DISPLAY".
è [ENTER] 4. @@è [ENTER] RDS PS: program service, the station name RDS PTY: program type FREQ: Frequency display Note TOP MENU TOP MENU
MULTI CONTROL MULTI CONTROL PREV PREV / / VOLUME ENTER ENTER NEXT NEXT // UNE TUNE RETURN CR 2 RETURN DOWN UP PHONES
Dynamic range compression Change this setting to listen to software recorded with Dolby Digital at low volume (such as late at night) and maintain audio
clarity. It reduces the peak level in loud scenes without affecting the sound field. MULTI CONTROL This unit does not have the emergency broadcast system
(EBS) that tunes automatically into emergency broadcasts. PTY Displays NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED
POP M ROCK M M.
O. R. M LIGHT M CLASSICS OTHER M WEATHER FINANCE CHILDREN SOCIAL A RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY
NATIONAL OLDIES FOLK M DOCUMENT TEST ALARM News Current affairs Information Sport Education Drama Culture Science Varied Pop music
Rock music Middle-of-the-road Music Light classical Serious classical Other music Weather information Finance Children Social affairs Religion Phone in
Travel Leisure Jazz music Country music National music Oldies Folk music Documentary Test broadcast Emergency announcement 1. Press [TOP MENU].
2. Press [< , >] to select "OPTION". è [ENTER] ("DR COMP" lights.) è [ENTER] 3. Press [< , >] to select "OFF", "STANDARD" or "MAX". è [ENTER]
OFF: The software is played with the original dynamic range (factory setting).
STANDARD: The level recommended by the producer of the software for household viewing. MAX: The maximum allowable compression (recommended for
night viewing). A/D attenuator Turn the A/D attenuator on if "OVERFLOW" lights frequently when using 2-channel analog input. MULTI CONTROL 1. Press
[TOP MENU]. 2. Press [< , >] to select "OPTION". è [ENTER] 3. Press [< , >] to select "A/D ATT". è [ENTER] 4.
Press [< , >] to select "ON" or "OFF". è [ENTER] Spectrum display Switch the SPECTRUM display on or off. MULTI CONTROL To change the AM
frequency step (For continental Europe and the United Kingdom) MULTI CONTROL 1. 2. 3.
4. Press [TOP MENU]. Press [< , >] to select "TUNER" è [ENTER] Press [< , >] to select "AM ALLOC" è [ENTER] Press [< , >] to select "9" or "10" è
[ENTER] (The frequency step changes from 9 kHz to 10 kHz.). RQT7384 1.
Press [TOP MENU]. 2. Press [< , >] to select "OPTION". è [ENTER] 3. Press [< , >] to select "SPECTRUM". è [ENTER] 4. Press [< , >] to select "ON" or
"OFF". è [ENTER] Operations 19 Other functions 4 7 DISC u/t DIRECT TUNING 5 6 VOLUME 4 7 DISC DIRECT TUNING 5 -/-- 6 VOLUME 8 9 SC-HT07
-/-0 y/i 8 9 SC-HT05 0 i > 10 = > 10 Center focus (This works on digital signals that have a center channel) You can make the sound of the center speaker
seem like it is coming from within the television. Remote control TUNER/BAND MUTING = u t y g TOP MENU h q MENU g TOP MENU h q MENU
DIRECT NAVIGATOR PLAY LIST DIRECT NAVIGATOR PLAY LIST Press [CENTER FOCUS]. "C.
FOCUS" lights. The factory setting is off. The center focus cannot be used in the following case. When input signal is PCM or analog stereo. When DVD
ANALOG 6CH is selected. ENTER DISPLAY TV VOL TV/AV RETURN TV VOL DISPLAY TV VOL ENTER RETURN TV VOL TV/AV DVD RECORDER
DVD/HDD DIMMER CENTER SUBWOOFER FOCUS /L LEVEL MUTING DIMMER INPUT MODE TEST INPUT MODE TONE/ BALANCE STEREO/
2CH MIX TEST SLEEP /R EFFECT SFC AV/MOVIE CENTER SUBWOOFER FOCUS STEREO/ 2CH MIX %PL LEVEL EFFECT SFC AV/MOVIE %PL
MUSIC MUSIC OFF OFF Subwoofer level For selecting subwoofer level.
You're reading an excerpt. Click here to read official PANASONIC
SC-HT05 user guide
http://yourpdfguides.com/dref/195506
Remote control Center Width Control "C-WDTH" You can adjust the effect of MUSIC and PANORAMA with the center width control. This adjustment helps
you realize a more natural sound image when listening to music. Move sound out into the front speakers to improve the overall front image, or add sound to
the center speaker to fix the center image. @@The default level is 3.
@@@@@@Remote control 1. Press [EFFECT] to select "C-WDTH". 2. @@@@@@The default is level 0. @@@@Engage the PCM FIX mode if this
occurs.
· With DTS, the signals may not be recognized at all. Engage the DTS FIX mode if this occurs. @@Press [EFFECT] to select "DIMEN". 2. @@Press
[INPUT MODE] to select "DIGITAL".
2. Press and hold [INPUT MODE] for four seconds. The current mode is displayed. Press again to change the mode. Each time you press the button: AUTO
PCM FIX DTS FIX Press [MUTING]. To cancel Press [MUTING] again. Muting is also canceled when the unit is turned off. When a FIX mode is on, the unit
cannot process other signals. This may cause noise to be output. Select "AUTO" if this occurs.
The mode returns to AUTO when you switch the unit to standby. For your reference If you are playing a DTS CD that contains both DTS and PCM, but it isn't
playing properly, then do the following after step 1 above: Use the MULTI CONTROL to enter the "OPTION" "DTS-PCM" menu and select "ON". If this
causes noise to occur, return the setting to "OFF". (This setting is effective for each digital source.) 20 RQT7384 SLOW g SC-HT07 q h MENU PLAY LIST g
TOP MENU SC-HT05q h MENU PLAY LIST TOP MENU DIRECT NAVIGATOR DIRECT NAVIGATOR MULTI CONTROL PREV / TOP MENU DISPLAY
ENTER RETURN TV VOL DISPLAY TV VOL MUTING INPUT MODE ENTER RETURN TV VOL ENTER NEXT / TV VOL TV/AV DIMMERSUBWOOFER
CENTER FOCUS DIMMER TEST CENTER TV/AV DVD RECORDER DVD/HDD RETURN TOP MENU MENU TOP TEST MODE /L /R TONE/ BALANCE
SLEEP LEVEL EFFECT VOLUME INPUT SUBWOOFER FOCUS STEREO/ 2CH MIX LEVEL EFFECT MUSIC MULTI CONTROL PREV / MULTI
CONTROL PREV / ENTER ENTER NEXT / NEXT / STEREO/ 2CH MIX %PL MUSIC SFC AV/MOVIE %PL SFC AV/MOVIE ^ 8 SFC INPUT SELECTOR
MUSIC AV/MOVE TUNE TUNE RETURN OFF DOWN UP PHONES OFF VIDEO IN L AUDIO IN R VCR 2 RETURN Tone You can adjust the level of the
bass and treble. MULTI CONTROL Sleep timer The SLEEP timer can turn the unit off after a set time. It does not control any other components. MULTI
CONTROL 1. Press [TOP MENU]. 2.
Press [< , >] to select "TONE". è [ENTER] 3. Press [< , >] to select "BASS" or "TREBLE". è [ENTER] 4. Press [< , >] to adjust bass/treble.
è [ENTER] Remote control (SC-HT07 only) Press [TONE/BALANCE] to select "BASS" or "TREBLE". Press [/L] or [+/R] to adjust bass/treble. Note 1. Press
[TOP MENU]. 2.
Press [< , >] to select "SLEEP". è [ENTER] 3. Press [< , >] to select the required time. The display changes as follows: OFF v 30 v 60 v 90 v 120 (minutes)
è [ENTER] Remote control (SC-HT07 only) Press [SLEEP]. Press [/L] or [+/R] to select the required time. To check the setting Repeat steps 1 and 2. or
Press [SLEEP] on the remote control once. (SC-HT07 only) The time remaining appears. To change a setting Repeat the procedure from the beginning.
Balance You can adjust the balance of the front speakers.
MULTI CONTROL Remote control (SC-HT07 only) Press [TONE/BALANCE] to select "BALANCE". Press [/L] or [+/R] to adjust. To adjust the speaker
level 1. Press [LEVEL] to select the speaker channel. Each time you press the button: Dimmer Dim the display for better viewing in a darkened room. MULTI
CONTROL C RS LS SW 2. Press [/L] or [+/R] to adjust the level. C, RS, and LS:10 dB to +10 dB SW: (off) MIN 1 19 MAX 1. Press [TOP MENU]. 2.
Press [< , >] to select "DIMMER". è [ENTER] 3. Press [ < , >] to select "ON". è [ENTER] 4. Press [< , >] to select "LEVEL1", "LEVEL2" or "LEVEL3".
è [ENTER] Remote control Press [DIMMER] to select dim or bright. To adjust the delay time 1. Press [EFFECT]. 2. Press [/L] or [+/R] to change the delay
time.
Delay time can be set at 10-millisecond (ms) intervals between 10 and 100 ms. The factory setting is 50 ms for each mode. RQT7384 Operations 21 1. Press
[TOP MENU]. 2. Press [< , >] to select "BALANCE". è [ENTER] 3. Press [< , >] to adjust. è [ENTER] Adjusting SFC effects You can adjust the sound field
by adjusting the level of the speakers and the delay time of the surround speakers. These adjustments can be made for each SFC mode.
Other functions D-INPUT (Digital input) Change the setting for the DIGITAL IN terminals (OPT1, OPT2, COAXIAL) on the rear of the unit if the equipment
you have connected is different to that labeled. MULTI CONTROL Using the VCR2 terminals (for SC-HT07) SFC INPUT SELECTOR MUSIC AV/MOVE
TUNE TUNE VIDEO IN L AUDIO IN R VCR 2 1. Press [TOP MENU]. 2. Press [< , >] to select "SETUP". è [ENTER] ("D-INPUT" lights.) è [ENTER] 3.
Press [< , >] to select "CD" (SC-HT07 only), "TV", "DVR" or "DVD". è [ENTER] 4. Press [< , >] to select "NONE" (SC-HT07 only), "OPT1", "OPT2" or
"COAX".
è [ENTER] The factory settings are: AUDIO OUT VIDEO OUT Video camera These terminals are convenient for equipment you want to connect only
temporarily. Select "VCR2" for input. Making a recording INPUT SELECTOR SC-HT07 CD: TV: DVR: DVD: Note SC-HT05 TV: OPT1 DVR: OPT2 DVD:
COAX NONE OPT1 OPT2 COAX TOP MENU MULTI CONTROL PREV / ENTER ^ 8 SFC INPUT SELECTOR MUSIC AV/MOVE TUNE TUNE You can
allocate only one piece of equipment per terminal. So for example if you change "TV" for "OPT1" to "OPT2", "DVR" will automatically switch to "OPT1".
VIDEO IN L AUDIO IN R VCR 2 RETURN AV output (For continental Europe and the United Kingdom) Recording on other equipment You can record to a
tape deck connected to TAPE REC (OUT) (SC-HT07), or a DVD recorder/VCR connected to DVR/VCR1 (DVR/VCR) OUT.
Select the equipment (DVD player or DVD recorder/VCR) whose audio/video signals you want to output to a television connected to the AV1 TV OUT
terminal on this unit. MULTI CONTROL Operations 1. Press [TOP MENU]. 2. Press [< , >] to select "SETUP".
è [ENTER] 3. Press [< , >] to select "AV OUT". è [ENTER] 4. Press [< , >] to select "DVD" or "VCR".
You're reading an excerpt. Click here to read official PANASONIC
SC-HT05 user guide
http://yourpdfguides.com/dref/195506
è [ENTER] 5. Press [< , >] to select "RCA" or "SCART". è [ENTER] The factory settings are: DVD: RCA VCR: RCA 1. Press [INPUT SELECTOR] to select
the source to be recorded. 2. Begin recording.
Follow your recording unit's operating instructions. 3. Start the source to be recorded. Note · (SC-HT07) With a tape deck, you can record any analogue
source except TAPE. With a DVD recorder/VCR, you can record any analogue source except DVR/VCR1 (DVR/VCR). · When you select DVD 6CH INPUT
mode, only sound from the front left and right channels is recorded. · Some sources do not allow digital recording. Connect through the analogue terminals
and select "ANALOG" input. . The RESET function The operation settings for the unit will be initialized to the settings made at the time of shipment.
However, any preset radio stations will not be erased. MULTI CONTROL 22 RQT7384 1. Press [TOP MENU]. 2. Press [< , >] to select "SETUP".
è [ENTER] 3. Press [< , >] to select "RESET". è [ENTER] 4. Press [< , >] to select "YES". è [ENTER] Remote control operation guide This remote control
can operate Panasonic, Technics and other brands (continental Europe and the United Kingdom only) of audiovisual equipment that have remote control
sensors.
Note that this remote control cannot operate some equipment and that it may not be able to perform some operations. Set your DVD player speaker output to
"small" when playing in DVD-6CH mode, provided it has speaker output setting function. DVD SC-HT07 RECEIVER AV SYSTEM DVD ANALOG 6CH VCR
CD TV Watching DVDs Switch on TV AV SYSTEM TV/AV ^ ^ ^ Switch on the television and select input DVD DVD DVD RECORDER DVD/HDD
RECORDER 1 4 7 DIRECT TUNING DISC u/t 2 5 8 0 y/i 3 6 9 -/-> 10 CH or DVD RECORDER AV SYSTEM ANALOG 6CH VOLUME ^ q Switch on the
player and start play Switch off DVD ANALOG 6CH = TUNER/BAND MUTING or DVD RECORDER AV SYSTEM TV AV SYSTEM ^ ^ g TOP MENU h q
MENU Operating the DVD player / DVD recorder TOP MENU DIRECT NAVIGATOR DIRECT NAVIGATOR PLAY LIST 1 4 7 2 5 8 0 -/-- 3 6 9 ENTER
DISPLAY TV VOL TV/AV INPUT MODE TONE/ BALANCE STEREO/ 2CH MIX RETURN TV VOL DIMMER SUBWOOFER CENTER FOCUS Show disc
menus > 10 = MENU TEST SLEEP /L LEVEL /R EFFECT MENU PLAY LIST ENTER Start play from a selected item SC-HT05 SFC %PL MUSIC
AV/MOVIE Show disc menus Select and enter menu items u/t y/i i RECEIVER AV SYSTEM OFF ^ ^ DVD ANALOG 6CH VCR TV ( u ) Skip items during play
DVD TUNER/BAND RECORDER GAME/AUX DISPLAY TV VOL u/t y/i y 1 4 7 DIRECT TUNING DISC u 2 5 8 -/-- 3 6 9 > 10 = t y CH Show player menus
VOLUME ( h t ) y/i y Search through the disc (Press and hold) MENU u/t 0 i TV VOL ( 1 4 2 5 3 h t ) Start slow-motion play g TOP MENU h q MENU
DIRECT TUNING DISC DIRECT NAVIGATOR PLAY LIST Specify a disc [5-disc changer] To view frame-by-frame ENTER DISPLAY TV VOL MUTING
INPUT MODE RETURN TV VOL DIMMER TV/AV DVD RECORDER DVD/HDD g h DVD RECORDER DVD/HDD Switch between DVD and HDD [DVD
recorder with HDD] Stop play Pause play TEST When using both a DVD player and a DVD recorder CENTER SUBWOOFER FOCUS LEVEL EFFECT To
prevent accidental operation · When operating a DVD recorder, use the remote control that comes with the DVD recorder. · When using a Panasonic DVD
recorder, change its remote control code to a different number such as "2" or "3". (Refer to its Operating Instructions for details.) RQT7384 Operations 23
MENU RETURN Clear menus or return to previous menus Remote control operation guide TV/VCR SC-HT07 RECEIVER AV SYSTEM DVD ANALOG 6CH
VCR CD TV Watching TV Switch on TV AV SYSTEM TV/AV ^ ^ ^ Switch on the television and select input Switch off TV AV SYSTEM DVD DVD RECORDER
DVD/HDD RECORDER 1 4 7 DIRECT TUNING DISC u/t 2 5 8 0 y/i 3 6 9 -/-> 10 CH ^ VOLUME = Operating the TV MUTING TUNER/BAND g TOP
MENU h q MENU 1 2 3 4 CH 1 4 7 2 5 8 -/-- 3 6 9 > 10 Select channels directly DISPLAY TV VOL RETURN TV VOL DIRECT NAVIGATOR PLAY LIST
Change channels sequentially 0 = Adjust the volume ENTER DISPLAY TV VOL TV/AV INPUT MODE TONE/ BALANCE STEREO/ 2CH MIX RETURN TV
VOL DIMMER SUBWOOFER CENTER FOCUS Watching videotapes Switch on TV AV SYSTEM TV/AV ^ Switch on the television and select input VCR AV
SYSTEM TEST SLEEP /L LEVEL SFC /R EFFECT %PL MUSIC SC-HT05 AV/MOVIE OFF RECEIVER AV SYSTEM OFF DVD ANALOG 6CH VCR
GAME/AUX TV ^ Switch on the player and start play Switch off VCR AV SYSTEM q ^ ^ DVD TUNER/BAND RECORDER TV AV SYSTEM ^ 1 4 2 5 8 -/-- ^ 3
6 9 > 10 CH Operating the video deck Operations 7 DIRECT TUNING DISC u VOLUME 0 i = t y g TOP MENU h q MENU 1 2 3 4 CH 1 4 7 2 5 8 0 3 6 9
ENTER Select channels directly u/t y/i Change channels sequentially > 10 ( u i ) = Rewind or fast-forward DIRECT NAVIGATOR PLAY LIST ENTER
DISPLAY TV VOL MUTING INPUT MODE g RETURN TV VOL Stop play h Pause play DIMMER TV/AV DVD RECORDER DVD/HDD TEST LEVEL SFC
EFFECT CENTER SUBWOOFER FOCUS RQT7384 STEREO/ 2CH MIX %PL MUSIC AV/MOVIE 24 CD Listening to CDs RECEIVER AV SYSTEM SCHT07 SC-HT07 Switch on DVD ANALOG 6CH VCR CD TV CD AV SYSTEM ^ ^ ^ Switch on the player and start play Switch off CD AV SYSTEM q DVD
DVD RECORDER DVD/HDD RECORDER 1 4 7 DIRECT TUNING DISC u/t 2 5 8 0 y/i 3 6 9 -/-> 10 CH ^ VOLUME = Operating the CD player MUTING
TUNER/BAND 1 6 2 7 3 8 4 9 5 10 1 4 2 5 8 0 -/-- 3 6 9 > 10 DIRECT TUNING DISC 1 4 2 5 3 g TOP MENU h q MENU Start play from a selected track 7
DIRECT NAVIGATOR PLAY LIST = Specify a disc [3- or 5-disc changer] ENTER u/t DISPLAY TV VOL TV/AV INPUT MODE TONE/ BALANCE STEREO/
2CH MIX y/i h 1 DIRECT TUNING DISC 2 5 8 0 3 6 9 q RETURN TV VOL CENTER DIMMER SUBWOOFER FOCUS Skip tracks during play Pause play 4
7 TEST SLEEP /L LEVEL SFC /R EFFECT %PL MUSIC AV/MOVIE Start play from a specified disc [MEGA CD changer] (holds more than 50 discs) Stop
play g OFF Changing the codes (For continental Europe and the United Kingdom) Press and hold the button corresponding to the equipment, and enter the
two digits.
You're reading an excerpt. Click here to read official PANASONIC
SC-HT05 user guide
http://yourpdfguides.com/dref/195506
If the code is correct, the equipment turns on or off. If it doesn't, try entering another code. · Reenter the codes after you change the batteries. TV RECEIVER
AV SYSTEM SC-HT07 SC-HT07 DVD ANALOG 6CH ^ ^ 11,12,25,32 28,36 01,09,26,41 21,39 34 05,07,37 18 40 14,33 32 37 02,05,06,07,10 11,12,25,37,38
14,19,28,36 05,07,37 26,41 27,35 02,03,05,10 11,12,38 11,12,13,15 11,12 DVD DVD RECORDER DVD/HDD RECORDER VCR 3 6 9 -/-> 10 CD GOVIDEO GRUNDIG HCM HITACHI ICE INNO HIT ITT ITT/NOKIA JVC KENDO KENWOOD LOEWE LOEWE OPTA LUXOR MATSUI METZ
MITSUBISHI NEC NOKIA 12 1 4 7 DIRECT TUNING DISC u/t 2 5 8 0 y/i CH 02,23,26,28 32,33 02,23 13,14 08,10,11,37 18,27,37 20,21 08,09,37 03,32
08,10,11,17 19,37 03,05,09 01 17,19,21,32 04,21,36,37 08,10,11,18 22,27,37 20,21 06 05,09 22,32,33,34,35 32 11 VOLUME = TUNER/BAND MUTING
Code table TV PANASONIC AKAI ALBA BAIRD BAUR BLAUPUNKT BRANDT BUSH DAEWOO DENON DUAL FERGUSON FINLUX FISHER FUNAI
GOLDSTAR 01,29,30,31 07,11,28,36 37 05,11,12 32 28,36 26,41 02,05,10,11 12,32,38 11,12,32 32 11,12 11,12,22,23 24,25,40 37 02,38 11,12 VCR 01,29,30
06,08,16,17 19,37 02,06,23 08,10,37 01,26,29,30,33 02,09,23 15 31 05,07,10,11,12 01,17 02 DVD 01 09 15 06 PHILIPS PHONOLA 04,16 (Continued on
next page) 25 RQT7384 NORDMENDE OCEANIC OKANO ORION 02 Operations TV GOLDSTAR/LG GOODMANS VCR 03,04,36,37 02,03,18,23 27,33
DVD Remote control operation guide Code table TV PIONEER POLKAUDIO RADIOLA RAITE RCA RFT ROADSTAR SABA SALORA SAMPO SAMSUNG
SANYO SCHAUB LORENZ SCHNEIDER SEG SELECO VCR DVD 03 16 13 02 33 02,03,18,23,27 21 08,11,17,19,37 15,16,18,27 07,10,11 10
02,03,18,23,27,32 02,18,23,27 02 14 10 SHARP SIEMENS SINUDYNE SONY TECHNICS THOMSON THORN TOSHIBA UNIVERSUM WHITE WESTIN
HOUSE YAMAHA ZENITH TV 17,20 11,12,17,28,36 02,05,11,12 22,24,38,40 16 05,26,41 06,08,11,12 14,16,25,32 03,04,06,08 39 11,12,22,40 VCR 22
03,10,11,32 24,25,26 21 10 15,17,19,32 03,08,32,37 DVD 08 11,12 39 26,41 07,37 11,12,15,21 25,34,39 07,17,25,37 11,12 39,40 11,24 05 01 02 04 01 07,12
Advance setup (For those with expertise) You can also change the speaker settings.
MULTI CONTROL 1. Press [<] and [>] at the same time. 2. Press [< , >] to select the sub menu. è [ENTER] If there is a menu in level 2 as well, repeat step
2 to make the settings. · Press [RETURN] to return to the level above. · Press [TOP MENU] to return to the Top menu. · Pressing [RETURN] or [TOP
MENU] while the Top menu is displayed takes you immediately to the EXIT menu. Note Change these settings only if necessary. Top menu Optional speakers
only Set the size to suit your speakers.
(Large: For speakers that can reproduce the bass range below 100 Hz) Sub menu (Level 1) Sub menu (Level 2) SPEAKERS FRONT CENTER SURROUND
SUB-WFR FRONT CENTER SURROUND SMALL, LARGE NONE, SMALL, LARGE NONE, SMALL, LARGE NO, YES 1.0 m 1.0 m 1.0 m 10.0 m 10.
0 m 10.0 m DISTANCE Enter the distance of the front, center and surround speakers from the seating position. FILTER EXIT Change the cut-off for bass
output from the front speakers Exit 100, 150, 200 (Hz) SAVE, NO NORSK SUOMI ADVARSEL! · APPARATET MÅ IKKE PLASSERES I EN BOKHYLLE, ET
INNEBYGGET KABINETT ELLER ET ANNET LUKKET STED HVOR VENTILASJONSFORHOLDENE ER UTILSTREKKELIGE. SØRG FOR AT
GARDINER ELLER LIGNENDE IKKE FORVERRER VENTILASJONSFORHOLDENE, SÅ RISIKO FOR ELEKTRISK SJOKK ELLER BRANN
FORÅRSAKET AV OVERHETING UNNGÅS. @@@@@@@@· ÄLÄ PEITÄ LAITTEEN TUULETUSAUKKOJA SANOMALEHDELLÄ, PÖYTÄLIINALLA,
VERHOLLA TAI MUULLA VASTAAVALLA ESINEELLÄ.
· ÄLÄ ASETA PALAVAA KYNTTILÄÄ TAI MUUTA AVOTULEN LÄHDETTÄ LAITTEEN PÄÄLLE. · HÄVITÄ PARISTOT LUONTOA
VAHINGOITTAMATTOMALLA TAVALLA. Operations ADVARSEL: FOR Å REDUSERE FAREN FOR BRANN, ELEKTRISK STØT ELLER SKADER PÅ
PRODUKTET, MÅ DETTE APPARATET IKKE UTSETTES FOR REGN, FUKTIGHET, VANNDRÅPER ELLER VANNSPRUT. DET MÅ HELLER IKKE
PLASSERES GJENSTANDER FYLT MED VANN, SLIK SOM BLOMSTERVASER, OPPÅ APPARATET. @@TÄMÄ LAITE ON TARKOITETTU LEUDOSSA
ILMASTOSSA. @@@@@@[SC-HT05] 2 Way, 2 Speaker, Bass-ref. Speaker unit Full range [SC-HT07] 6.5 cm cone type x 2, 6 [SC-HT05] 6.5 cm cone
type, 6 Super tweeter (SB-FS927,SB-PF725) 6 cm Ring Shaped Dome type, 6 Tweeter (SB-PS725) 6 cm cone type, 6 Input power (IEC) [SC-HT07] 60 W
(Max) [SC-HT05] 55 W (Max) Output sound pressure level [SC-HT07] 85 dB/W (1.0 m) [SC-HT05] 80 dB/W (1.
0 m) Crossover frequency [SC-HT07] 800 Hz, 7 kHz [SC-HT05] 5 kHz Frequency range [SC-HT07] 96 Hz-50 kHz (-16 dB) 120 Hz-45 kHz (-10 dB) [SCHT05] 95 Hz-41 kHz (-16 dB) 110 Hz-40 kHz (-10 dB) Dimensions (W x H x D) [SC-HT07] 240 x 678 to 1138 x 240 mm [SC-HT05] 86 x 240 x 115 mm Mass
[SC-HT07] 4.20 kg [SC-HT05] 0.89 kg Center speaker (SC-HT07:SB-PC927) (SC-HT05:SB-PC725) Type 2 Way, 3 Speaker, Bass-ref. Speaker unit Full
range 6.5 cm cone type x 2, 6 [SC-HT07] Super tweeter 6 cm Ring Shaped Dome type, 6 [SC-HT05] Tweeter 6 cm cone type, 6 Input power (IEC) [SC-HT07]
220 W (Max) [SC-HT05] 160 W (Max) Output sound pressure level [SC-HT07] 84 dB/W (1.0 m) [SC-HT05] 83 dB/W (1.0 m) Crossover frequency 5 kHz
Frequency range [SC-HT07] 110 Hz-50 kHz (-16 dB) 130 Hz-46 kHz (-10 dB) [SC-HT05] 92 Hz-41 kHz (-16 dB) 110 Hz-40 kHz (-10 dB) Dimensions (W x H
x D) [SC-HT07] 320 x 97 x 93 mm [SC-HT05] 300 x 103 x 117 mm Mass [SC-HT07] 1.50 kg [SC-HT05] 1.48 kg Active subwoofer (SC-HT07:SB-WA07) (SCHT05:SB-WA05) Type 1 Way 1 Speaker, Bass-ref. Speaker unit (Woofer) 17 cm cone type, 4 Input power (IEC) [SC-HT07] 240 W (Max) [SC-HT05] 220 W
(Max) Output sound pressure level 80 dB/W (1.
0 m) Frequency range 32-220 Hz (-16 dB) 36-190 Hz (-10 dB) Dimensions (W x H x D) 209 x 361 x 463 mm Mass [SC-HT07] 11.8 kg [SC-HT05] 11.5 kg n
FM TUNER SECTION Frequency range Sensitivity S/N 30 dB S/N 26 dB S/N 20 dB IHF usable sensitivity IHF 46 dB stereo quieting sensitivity Total
harmonic distortion MONO STEREO S/N MONO STEREO Frequency response Image rejection at 98 MHz IF rejection at 98 MHZ Stereo separation 1 kHz
Antenna terminal 87.50-108.00 MHz 1.
5 µV/75 1.3 µV/75 1.2 µV/75 (IHF '58) 1.5 µV/75 22 µV/75 0.2 % 0.
3 % 60 dB (71 dB, IHF) 58 dB (65 dB, IHF) 20 Hz-15 kHz, +1 dB, -2 dB 40 dB 70 dB 40 dB 75 (unbalanced) 522-1611 kHz (9 kHz steps) 530-1620 kHz (10
kHz steps) 450 µV/m 35 dB n GENERAL Power supply For the United Kingdom, Australia and New Zealand AC 230-240 V, 50 Hz For continental Europe AC
230 V, 50 Hz For other areas AC 220-240 V, 50/60 Hz Power consumption (Main unit) 25 W (Subwoofer) [SC-HT07] 290 W [SC-HT05] 250 W Dimensions
(W x H x D) (Main unit) 430 x 68 x 287 mm Mass (Main unit) 2.0 kg Power consumption in standby mode: 1W Notes: 1. Specifications are subject to change
without notice.
You're reading an excerpt. Click here to read official PANASONIC
SC-HT05 user guide
http://yourpdfguides.com/dref/195506
Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. n AM TUNER SECTION Frequency range
Sensitivity Selectivity (at 999 kHz) Maintenance To clean this unit, wipe with a soft, dry cloth. · Never use alcohol, paint thinner or benzine to clean this unit. ·
Before using chemically treated cloth, read the instructions that came with the cloth carefully. RQT7384 n VIDEO SECTION Output voltage at 1 V input
(unbalanced) Maximum input voltage Input/output impedance 1±0.
1 Vp-p 1.5 Vp-p 75 If the surfaces are dirty Reference 27 Troubleshooting guide Before requesting service, make the below checks. If you can't fix the unit as
described or if something not listed here occurs, contact your dealer. Common problems No power. · Ensure the AC mains lead and system cable are
connected. · · · · · · · Turn the volume up. Check connections to speakers and other equipment. Select the correct source. Change the D-INPUT setting to suit
the type of connection you have made. Check that the digital signals can be decoded by this unit.
Turn PCM FIX or DTS FIX off. Check the AV output settings and set them to suit the connections (RCA or SCART) you have made. Pages 8 13 7-11 13 22 9
20 9, 22 No sound or no picture. "F76" appears on the display, and the unit turns off. "FAN LOCK" appears on the display.
"F 70" appears on the display. · Determine and correct the cause, then turn the unit on. Causes include: - Shorting (bare wires touching) of positive and
negative speaker wires. - Using the subwoofer in a hot environment without proper ventilation. Consult your dealer if the problem occurs again after turning
the unit on.
7 · Turn the unit off, disconnect the AC mains lead, and consult your dealer. Sound modes Sound is not heard from the center, surround, or subwoofer
speakers. Cannot use Dolby Pro LogicII or SFC. · Turn 2CH MIX off. · The source may be stereo. Change the sound mode. · You cannot use Dolby Pro
LogicII or SFC when input is PCM with sampling frequencies of 96 or 88.2 kHz. Pages 13 13 13 Radio · Connect the appropriate antenna. (You may need an
outdoor antenna or one with more elements.
) · Adjust the position of the FM or AM antenna. · Reduce the treble. · Turn off nearby televisions, video decks and DVD players. · Separate the antenna from
other cables, leads, and appliances. · Press and hold [MULTI CONTROL, ENTER] on the main unit so "DEFEAT" appears (the DSP is defeated). This should
reduce noise. The unit cannot play multiple channel sound while the DSP is defeated, so repeat this to reengage the DSP. · Change the frequency step. Pages
10 10 21 The radio cannot be tuned in or there is a lot of noise and interference. There is a lot of noise when listening to AM.
The correct AM frequency cannot be tuned in. 17 NORSK Utstyret bør plasseres i nærheten av AC-stikkontakten, og støpslet må være lett tilgjengelig hvis det
skulle oppstå problemer. SUOMI Laite tulee asettaa lähelle verkkopistorasiaa ja pistokkeen täytyy olla sellaisessa asennossa, että siihen on helppo tarttua
ongelman sattuessa. Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/ En RQT7384-3B H0104SG3044 .
You're reading an excerpt. Click here to read official PANASONIC
SC-HT05 user guide
http://yourpdfguides.com/dref/195506
Powered by TCPDF (www.tcpdf.org)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising