Speaker - MCM Electronics
C52_pg_132
8/10/07
4:59 PM
Page 132
Speaker
Components
section
5
15"
Professional
Woofer
5
Speaker Components
Amplifier Modules . . .148
AMS . . . . . . . . . . . . .149
Bennic Capacitors . . . .149
Compression
Drivers . . . . . . . .144~146
Crossovers/
Components . . . . . . .149
Full Range 137, 139, 147
Galaxy Audio . . . . . . .137
Grills/Hardware . .147~150
Horn Lens . . . . .145, 146
Jensen (Vintage) . . . .140
L-Pads . . . . . . . . . . .147
Midranges . . . . .139, 142
Passive Radiators . . . .139
Piezo Tweeters . . . . . .145
Pioneer Tweeters 137~139,
142~144, 150
Pyle . . .140, 142, 144~146
Pyramid . . .140~142, 146
Ribbon Tweeters . . . . .143
Tweeters . . . . . .142~144
Woofers . . . . . . .132~142
Perfect for musical
instrument, PA and
sound reinforcement use. Perfect in PA cabinets,
keyboard, guitar and bass amps, this driver is a
drop in replacement for the Carvin PS15. Features:
•Rigid paper cone •Treated cloth accordion surround
•Stamped steel basket •21⁄2" aluminum voice coil
wound on a Kapton former •60 oz. vented magnet
Specifications: •Power capacity: 200W/400W
RMS/peak •Sensitivity: 96.1dB (W/M) •Impedance:
8ohm •Re: 5.7ohm •Le: 1.1mH •Frequency response:
38Hz~3.5KHz •Fs: 43Hz •Qts: 0.46 •Qes: 0.51 •Qms:
4.40 •Vas: 205 (liters) •Xmax: 3.7mm •Overall frame
diameter: 15.19" •Required cutout: 14.19" •Mounting
depth: 6.50"
Order #
55-1747
(1–3)
$59.95
(4–up)
$52.50
18" Die Cast Professional Woofer
Perfect for musical instrument, PA and sound
reinforcement use. This driver handles the power
required for stage use, while offering tremendous
low frequency response. Features: •Rigid paper cone
•Treated cloth accordion surround •Die cast basket
•4" voice coil •77 oz. magnet Specifications: •Power
capacity: 250W/500W RMS/peak •Sensitivity: 96dB
(W/M) •Impedance: 8ohm •Re: 6.8ohm •Le: 1.09mH
•Frequency response: 30Hz~3000Hz •Fs: 31Hz
•Qts: 0.38 •Qes: 0.47 •Qms: 2.19 •Vas: 404.8 (liters)
•Xmax: 4.4mm •Overall frame diameter: 18.6"
•Required cutout: 17" •Mounting depth: 7.5"
Order #
55-1875
(1-3)
$119.00
(4-up)
$109.21
12" Dual Voice Coil Woofer
Dual voice coils are suitable for use with passive
subwoofer crossovers and may be paralleled for use
with most subwoofer amplifier modules. It is also
perfectly suitable as a conventional 4ohm or 16ohm
woofer. Features: •Poly treated paper cone •Rubber
surround •Stamped steel basket •2" voice coil
•42.6 oz. magnet Specifications: •Power capacity:
100W/200W RMS/peak (per coil) •Sensitivity: 93dB
(W/M) •Impedance: 8ohm (per coil) •Re: 5.8ohm (per
coil) •Le: 0.59mH (per coil) •Frequency response:
25Hz~3KHz •Fs: 25Hz •Qts: 0.30 •Qes: 0.32 •Qms:
3.13 •Vas: 203.81 (liters) •Xmax: 5.0mm •Overall
frame diameter: 11.81" •Required cutout: 11.00"
•Mounting depth: 5.47"
Order #
55-1465
(1-3)
$39.95
(4-up)
$34.14
This massive
dual voice coil
woofer is
perfect for
use in passive
or active
subwoofer
applications. Dual 8ohm voice coils are ideal when
using a passive subwoofer crossover, and may be
paralleled for single coil 4ohm use. This driver is
a perfect match to the #50-755 passive subwoofer
crossover, or with our massive 350W subwoofer
amplifier module #50-6282. Features: •Die cast
aluminum basket •Full 1" wide butyl rubber
surround •Treated paper cone with inverted dust
cap •3"voice coil •Dual (stacked) 60 oz. magnets
•Vented pole piece •Woven lead wire Dimensions:
•Overall frame diameter: 12.38" •Required cutout:
11.38" diameter •Magnet diameter: 7" •Mounting
depth: 6.13"
(1-3)
$99.95
(4-up)
$91.75
NET 30
Terms
132
Full range speaker is ideal for all sound reinforcement
applications, especially musical instrument. It is
especially suitable for use in guitar and bass guitar
cabinets. Features: •Aluminum cone •Treated cloth
surround •Stamped steel basket •1.5" voice coil
•20 oz. magnet Specifications: •Power capacity:
70W/100W RMS/peak •Sensitivity: 90dB (W/M)
•Impedance: 8ohm •Re: 7.0ohm •Le: 0.66mH
•Frequency response: 40Hz~8KHz •Fs: 40Hz
•Qts: 0.99 •Qes: 1.40 •Qms: 3.37 •Vas: 134.04 (liters)
•Xmax: 3.35mm •Overall frame diameter: 12.05"
•Required cutout: 10.98" •Mounting depth: 4.78"
Order #
55-1305
12" Die Cast
Dual Voice
Coil Woofer
Order #
55-2332
12" Aluminum Cone
Musical Instrument Speaker
Order Online
www.mcmelectronics.com
(1-3)
$27.95
(4-up)
$26.20
15" Die Cast Professional Woofer
Perfect for musical instrument, PA and sound
reinforcement use. This driver handles the power
required for stage use, while offering tremendous low
frequency response. Features: •Rigid paper cone
•Treated cloth accordion surround •Die cast basket
•4" voice coil •100 oz. magnet Specifications:
•Power capacity: 400W/800W RMS/peak •Sensitivity:
98dB (W/M) •Impedance: 8ohm •Re: 6.6ohm •Le:
1.2mH •Frequency response: 26Hz~3500Hz •Fs:
28Hz •Qts: 0.23 •Qes: 0.27 •Qms: 1.46 •Vas: 463
(liters) •Xmax: 4.4mm •Overall frame diameter:
15.75" •Required cutout: 14.63" •Mounting depth: 5"
Order #
55-1880
(1-3)
$97.95
(4-up)
$88.20
12" Professional
Woofer
Perfect for
musical
instrument,
PA and sound
reinforcement use.
This driver exhibits
characteristics typical
of drivers at over twice
the price. It is an ideal
upgrade for the Eminence Alpha Series, and a
drop in replacement for the Carvin PS12. Features:
•Rigid paper cone •Treated cloth accordion surround
•Stamped steel basket •2" aluminum voice coil
wound on a Kapton former •45 oz. vented magnet
Specifications: •Power capacity: 150W/300W
RMS/peak •Sensitivity: 96.7dB (W/M) •Impedance:
8ohm •Re: 7.0ohm •Le: 0.85mH •Frequency response:
50Hz~4.5KHz •Fs: 45Hz •Qts: 0.43 •Qes: 0.47 •Qms:
4.95 •Vas: 140.09 (liters) •Xmax: 1.0mm •Overall
frame diameter: 12.25" •Required cutout: 11.25"
•Mounting depth: 5.25"
Order #
55-1745
(1-3)
$41.95
(4-up)
$38.88
15" Aluminum
Cone Musical Instrument Speaker
Full range speaker is ideal for all sound reinforcement
applications, especially musical instrument. It is
especially suitable for use in guitar and bass guitar
cabinets. Features: •Aluminum cone •Treated cloth
surround •Stamped steel basket •2" voice coil •30 oz.
magnet Specifications: •Power capacity: 130/175W
RMS/peak •Sensitivity: 90dB (W/M) •Impedance:
8ohm •Re: 6.9ohm •Le: 0.81mH •Frequency response:
40Hz~7KHz •Fs: 40Hz •Qts: 0.1.45 •Qes: 1.93 •Qms:
5.76 •Vas: 144.18 (liters) •Xmax: 4.05mm •Overall
frame diameter: 15.20" •Required cutout: 13.89"
•Mounting depth: 5.98"
Order #
55-1310
(1-3)
$44.95
(4-up)
$40.76
C52_pg_133
8/8/07
1:03 PM
Page 133
Speaker
Components
10" Treated
Cone Woofer
12" Polypropylene Cone Woofer
Order #
55-1220
(1-3)
$39.95
Order #
55-1945
(1-3)
$21.50
(4-up)
$19.95
(4-up)
$34.75
10" Aluminum
Cone Musical
Instrument
Speaker
12" Polypropylene Cone Woofer
Considered one of our most popular general purpose
replacement drivers, this woofer offers very good
power handling and low frequency response. It is
perfect for replacement use in traditional style large
three-way systems, or as a subwoofer. Features:
•Polypropylene cone •Foam surround •Stamped
steel basket •1.75" voice coil •30 oz. magnet
Specifications: •Power capacity: 70W/100W
RMS/peak •Sensitivity: 97dB (W/M) •Impedance:
8ohm •Re: 7.1ohm •Le: 0.73mH •Frequency
response: 35Hz~4KHz •Fs: 35Hz •Qts: 0.55
•Qes: 0.76 •Qms: 2.05 •Vas: 197.62 (liters)
•Xmax: 3.5mm •Overall frame diameter: 11.97"
•Required cutout: 11.02" •Mounting depth: 4.94"
Order #
55-1255
(1-3)
$26.95
(4-up)
$22.62
12" Treated Cone Woofer
Rugged woofer is perfect in larger traditional three
way systems or as a subwoofer. It has also seen great
success as a bandpass subwoofer in automotive
applications. Features: •Poly treated paper cone
•Treated foam surround •Stamped steel frame •1.73"
voice coil •40 oz. vented magnet Specifications:
•Power capacity: 80W/150W RMS/peak •Sensitivity:
90dB (W/M) •Impedance: 8ohm •Re: 7.2ohm •Le:
1.05mH •Frequency response: 25Hz~2.5KHz •Fs:
30Hz •Qts: 0.60 •Qes: 0.65 •Qms: 6.2 •Vas: 130
(liters) •Xmax: 6.5mm •Overall frame diameter:
12.20" •Required cutout: 11.10" •Mounting
depth: 5.39"
Order #
55-1950
(1-3)
$27.95
(4-up)
$24.10
Full range
speaker is ideal
for all sound
reinforcement
applications,
especially musical instrument. It is especially
suitable for use in guitar and bass guitar cabinets.
Features: •Aluminum cone •Treated cloth
surround •Stamped steel basket •1.5" voice coil
•20 oz. magnet Specifications: •Power capacity:
70W/100W RMS/peak •Sensitivity: 90dB (W/M)
•Impedance: 8ohm •Re: 6.9ohm •Le: 0.65mH
•Frequency response: 45Hz~10KHz •Fs: 45Hz
•Qts: 0.87 •Qes: 1.07 •Qms: 4.73 •Vas: 71.34 (liters)
•Xmax: 3.35mm •Overall frame diameter: 10.08"
•Required cutout: 9.21" •Mounting depth: 4.21"
Order #
55-1300
(1-3)
$21.95
(4-up)
$20.40
10" Professional
Woofer
Perfect for
musical instrument,
PA and sound
reinforcement use.
This driver exhibits
characteristics typical of
drivers at over twice the price. It
is an ideal upgrade for the Eminence Alpha Series,
and a drop in replacement for the Carvin PS10.
Features: •Rigid paper cone •Treated cloth accordion
surround •Stamped steel basket •2" aluminum voice
coil wound on a Kapton former •35 oz. vented magnet
Specifications: •Power capacity: 150W/300W
RMS/peak •Sensitivity: 94.7dB (W/M) •Impedance:
8ohm •Re: 5.85ohm •Le: 0.67mH •Frequency
response: 60Hz~5KHz •Fs: 60Hz •Qts: 0.50 •Qes:
0.54 •Qms: 7.59 •Vas: 55.33 (liters) •Xmax: 4.0mm
•Overall frame diameter: 10.25" •Required cutout:
9.25" •Mounting depth: 4.25"
Order #
55-1740
(1-3)
$32.95
(4-up)
$29.15
section
5
10" Dual
Voice Coil
Woofer
Dual voice coils
are suitable
for use with
passive subwoofer
crossovers and may be
paralleled for use with
most subwoofer amplifier
modules. It is also perfectly
suitable as a conventional 4ohm or 16ohm woofer.
Features: •Aluminum cone •Rubber surround
•Synthetic dust cap •Stamped steel basket •1.4"
copper voice coil on an aluminum former •30 oz.
magnet Specifications: •Power capacity: 70W/100W
RMS/peak (per coil) •Sensitivity: 89dB (W/M)
•Impedance: 8ohm (per coil) •Re: 6.0ohm (per coil)
•Le: 0.60mH (per coil) •Frequency response:
35Hz~6KHz •Fs: 35Hz •Qts: 0.48 •Qes: 0.57
•Qms: 3.26 •Vas: 65.5 (liters) •Xmax: 4.1mm
•Overall frame diameter: 10.43" •Required
cutout: 9.06" •Mounting depth: 4.61"
Order #
55-2190
(1-3)
$27.09
(4-up)
$25.14
10" Dual Voice
Coil Woofer
Dual voice coils
are suitable for
use with passive
subwoofer crossovers
and may be paralleled
for use with most
subwoofer amplifier
modules. It is also perfectly suitable as a conventional
4ohm or 16ohm woofer. Features: •Poly treated
paper cone •Rubber surround •Stamped steel basket
•1.5" voice coil •30 oz. magnet Specifications:
•Power capacity: 80W/150W RMS/peak (per coil)
•Sensitivity: 90dB (W/M) •Impedance: 8ohm
(per coil) •Re: 5.8ohm (per coil) •Le: 0.59mH (per coil)
•Frequency response: 30Hz~3KHz •Fs: 30Hz •Qts:
0.49 •Qes: 0.55 •Qms: 4.39 •Vas: 126.62 (liters)
•Xmax: 2.00mm •Overall frame diameter: 10.08"
•Required cutout: 9.21" •Mounting depth: 4.80"
Order #
55-1460
(1-3)
$29.95
(4-up)
$26.20
10" Poly Treated
Cone Woofer
Poly treated
paper cone
driver combines
the benefits of a
lightweight rigid
cone, with the moisture
resistance of polypropylene.
It is perfect in traditional
style larger two and three way enclosures, as a
subwoofer and in automotive applications. Features:
•Rubber surround •Stamped steel basket •1.25"
voice coil •30 oz. magnet Specifications: •Power
capacity: 50W/100W RMS/peak •Sensitivity: 91dB
(W/M) •Impedance: 4ohm •Re: 3.0ohm •Le: 0.82mH
•Frequency response: 28Hz~3KHz •Fs: 28Hz
•Qts: 0.25 •Qes: 0.27 •Qms: 3.80 •Vas: 12360 (liters)
•Xmax: 1.0mm •Overall frame diameter: 10.08"
•Required cutout: 9.21" •Mounting depth: 4.80"
Order #
55-1525
(1-3)
$24.95
(4-up)
$22.01
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
133
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
5
Offering very good power handling and low frequency
response, this woofer is ideal in traditional style
larger three way enclosures, or as a subwoofer.
Features: •Polypropylene cone •Rubber surround
•Stamped steel basket •Bumped and vented magnet
•2" voice coil •42 oz. magnet Specifications: •Power
capacity: 100W/200W RMS/peak •Sensitivity: 98dB
(W/M) •Impedance: 8ohm •Re: 6.8ohm •Le: 2.15mH
•Frequency response: 26Hz~3KHz •Fs: 26Hz
•Qts: 0.30 •Qes: 0.34 •Qms: 2.33 •Vas: 175.88 (liters)
•Xmax: 2.25mm •Overall frame diameter: 12.09"
•Required cutout: 10.63" •Mounting depth: 5.35"
Rugged woofer
is perfect
in larger
traditional
three way
systems or as
a subwoofer. It
has also seen
great success
as a bandpass subwoofer in automotive applications.
Features: •Poly treated paper cone •Treated foam
surround •Stamped steel frame •1.38" voice coil •35
oz. vented magnet Specifications: •Power capacity:
50W/100W RMS/peak •Sensitivity: 89dB (W/M)
•Impedance: 8ohm •Re: 7.1ohm •Le: 2.23mH
•Frequency response: 21Hz~3.5KHz •Fs: 26Hz •Qts:
0.35 •Qes: 0.35 •Qms: 3.6 •Vas: 110 (liters) •Xmax:
5.0mm •Overall frame diameter: 10.16" •Required
cutout: 9.13" •Mounting depth: 4.31"
C52_pg_134
8/8/07
12:57 PM
Page 134
Speaker
Components
section
5
5
10" Polypropylene
Cone Woofer
Offering very good
power handling and low
frequency response, this
woofer is ideal in traditional
style three-way enclosures,
or as a subwoofer. Features:
•Polypropylene cone •Rubber surround •Stamped
steel basket •Bumped and vented magnet •1.5" voice
coil •26 oz. magnet Specifications: •Power capacity:
85W/150W RMS/peak •Sensitivity: 94dB (W/M)
•Impedance: 8ohm •Re: 6.8ohm •Le: 0.83mH
•Frequency response: 30Hz~4KHz •Fs: 30Hz
•Qts: 0.53 •Qes: 0.70 •Qms: 2.17 •Vas: 90.05 (liters)
•Xmax: 1.00mm •Overall frame diameter: 10.08"
•Required cutout: 9.17" •Mounting depth: 4.92"
Order #
55-1215
(1-3)
$27.95
(4-up)
$23.44
10" Polypropylene
Cone Woofer
Considered
one of our
most popular
general purpose
replacement drivers,
this woofer offers very
good power handling
and low frequency response
for its size. Features: •Polypropylene cone •Foam
surround •Stamped steel basket •1.5" voice coil
•20 oz. magnet Specifications: •Power capacity:
70W/100W RMS/peak •Sensitivity: 94dB (W/M)
•Impedance: 8ohm •Re: 7.0ohm •Le: 0.71mH
•Frequency response: 35Hz~5KHz •Fs: 35Hz
•Qts: 0.58 •Qes: 0.87 •Qms: 1.76 •Vas: 105.84
(liters) •Xmax: 1.0mm •Overall frame diameter:
10.08" •Required cutout: 9.17" •Mounting depth: 4.11"
Order #
55-1250
(1-3)
$21.95
(4-up)
$18.20
10" Clear
Polypropylene
Cone Woofer
Unique semi
transparent poly cone
driver provides very good
power handling and low
frequency response. It is ideal
in traditional larger three–way systems or as a
subwoofer. Features: •Polypropylene cone •Foam
surround •Stamped steel basket •1.5" voice coil
•17.7 oz. magnet Specifications: •Power capacity:
50W/100W RMS/peak •Sensitivity: 88dB (W/M)
•Impedance: 8ohm •Re: 7.0ohm •Le: 0.71mH
•Frequency response: 35Hz~5KHz •Fs: 35Hz •Qts:
0.58 •Qes: 0.87 •Qms: 1.76 •Vas: 105.84 (liters)
•Xmax: 1.0mm •Overall frame diameter: 10.08"
•Required cutout: 9.17" •Mounting depth: 4.33"
Order #
55-1165
(1-3)
$19.95
(4-up)
$17.38
NET 30
Terms
134
Order Online
www.mcmelectronics.com
10" Square
Frame Woofer
8" Professional
Woofer
Semi
transparent
cone woofer is a
popular replacement in
many OEM cabinets. The
square frame directly matches
many commonly used hole patterns. Features:
•Clear polypropylene cone •Foam surround
•Stamped steel basket •1.5" voice coil •17.7 oz.
magnet Specifications: •Power capacity: 75W/150W
RMS/peak •Sensitivity: 89dB (W/M) •Impedance:
8ohm •Re: 7.2ohm •Le: 0.62mH •Frequency response:
35Hz~3KHz •Fs: 35Hz •Qts: 0.66 •Qes: 0.73 •Qms:
6.89 •Vas: 86.99 (liters) •Xmax: 2.5mm •Overall
frame dimensions: 10.16" x 10.16" •Required cutout:
9.06" •Mounting depth: 4.33"
Perfect for musical
instrument, PA and
sound reinforcement
use. This driver exhibits
characteristics typical of
drivers at over twice the price. It is an ideal
upgrade for the Eminence Alpha Series, and a
drop in replacement for the Carvin PS8. Features:
•Rigid paper cone •Treated cloth accordion surround
•Stamped steel basket •2" aluminum voice coil
wound on a Kapton former •30 oz. vented magnet
Specifications: •Power capacity: 100W/200W
RMS/peak •Sensitivity: 96dB (W/M) •Impedance:
8ohm •Re: 5.58ohm •Le: 0.55mH •Frequency
response: 60Hz~9KHz oFs: 95Hz •Qts: 0.36 •Qes:
0.39 •Qms: 5.68 •Vas: 23.87 (liters) •Xmax: 1.0mm
•Overall frame diameter: 8.25" •Required cutout:
7.25" •Mounting depth: 3.50"
Order #
55-1650
(1-3)
$17.95
(4-up)
$16.83
Order #
55-1735
10" Woven
Carbon Fiber
Cone Woofer
(1-3)
$52.95
(4-up)
$47.90
Dual voice coils are
suitable for use with
passive subwoofer
crossovers and may
be paralleled for use
with most subwoofer
amplifier modules.
It is also perfectly
suitable as a conventional 4ohm or 16ohm woofer.
Features: •Aluminum cone •Rubber surround
•Synthetic dust cap •Stamped steel basket •1.4"
copper voice coil on an aluminum former •30 oz.
magnet Specifications: •Power capacity: 70W/100W
RMS/peak (per coil) •Sensitivity: 87dB (W/M)
•Impedance: 8ohm (per coil) •Re: 6.0ohm (per coil)
•Le: 0.59 (per coil) •Frequency response: 45Hz~9KHz
•Fs: 45Hz •Qts: 0.45 •Qes: 0.50 •Qms: 4.24 •Vas:
17.8 (liters) •Xmax: 4.1mm •Overall frame diameter:
8.07" •Required cutout: 7.19" •Mounting depth: 3.82"
Order #
55-2185
8" Aluminum
Cone Musical
Instrument
Speaker
(1-3)
$21.84
(4-up)
$20.29
8" Dual Voice
Coil Woofer
Full range speaker
is ideal for all sound
reinforcement
applications,
especially musical instrument. It is especially
suitable for use in guitar and bass guitar cabinets.
Features: •Aluminum cone •Treated cloth surround
•Stamped steel basket •1.5" voice coil •18 oz. magnet
Specifications: •Power capacity: 60W/100W
RMS/peak •Sensitivity: 89dB (W/M) •Impedance:
8ohm •Re: 6.1ohm •Le: 0 .74mH •Frequency
response: 60Hz~10KHz •Fs: 60Hz •Qts: 0.91 •Qes:
1.12 •Qms: 4.73 •Vas: 22.41 (liters) •Xmax: 4.25mm
•Overall frame diameter: 8.07" •Required cutout:
7.19" •Mounting depth: 3.52"
Order #
55-1295
(4-up)
$23.63
8" Dual Voice
Coil Woofer
Extremely
lightweight and rigid,
carbon fiber makes an
ideal woofer cone material.
The stamped frame features
a rounded over front basket for greatly improved
appearance. Features: •Carbon fiber cone •Rubber
surround •Stamped steel basket •2" voice coil
•42.7 oz. magnet Specifications: •Power capacity:
100W/200W RMS/peak •Sensitivity: 92dB (W/M)
•Impedance: 8ohm •Re: 6.2ohm •Le: 1.78mH
•Frequency response: 30Hz~4KHz •Fs: 30Hz
•Qts: 0.33 •Qes: 0.35 •Qms: 5.24 •Vas: 116.74 (liters)
•Xmax: 1.5mm •Overall frame diameter: 11.14"
•Required cutout: 8.86" •Mounting depth: 4.80"
Order #
55-1555
(1-3)
$27.95
(1-3)
$16.95
(4-up)
$16.00
Dual voice coils are
suitable for use with
passive subwoofer
crossovers and may be
paralleled for use with most
subwoofer amplifier modules.
It is also perfectly suitable as a conventional 4ohm
or 16ohm woofer. Features: •Poly treated paper cone
•Rubber surround •Stamped steel basket •1.5" voice
coil •20 oz. magnet Specifications: •Power capacity:
60W/100W RMS/peak (per coil) •Sensitivity: 89dB
(W/M) •Impedance: 8ohm (per coil) •Re: 5.8ohm
(per coil) •Le: 0.59mH (per coil) •Frequency response:
30Hz~4KHz •Fs: 30Hz •Qts: 0.35 •Qes: 0.40 •Qms:
3.21 •Vas: 56.80 (liters) •Xmax: 3.0mm •Overall
frame diameter: 8.07" •Required cutout: 7.19"
•Mounting depth: 3.76"
Order #
55-1455
(1-3)
$19.95
(4-up)
$18.20
8” Woven Carbon Fiber Cone Woofer
Extremely lightweight and rigid, carbon fiber makes an ideal woofer cone
material. The stamped frame features a rounded over front basket for greatly
improved appearance. Features: •Carbon fiber cone •Rubber surround
•Stamped steel basket •1.5" voice coil •30 oz. magnet Specifications: •Power
capacity: 75W/150W RMS/peak •Sensitivity: 90dB (W/M) •Impedance: 8ohm
•Re: 6.0ohm •Le: 1.55mH •Frequency response: 30Hz~5KHz •Fs: 30Hz •Qts:
0.35 •Qes: 0.37 •Qms: 4.73 •Vas: 59.01 (liters) •Xmax: 1.5mm •Overall frame
diameter: 9.05" •Required cutout: 7.28" •Mounting depth: 4.15"
Order #
55-1550
(1-3)
$37.95
(4-up)
$31.88
C52_pg_135
8/8/07
12:55 PM
Page 135
8” Poly Treated
Cone Woofer
Poly treated paper
cone driver combines
the benefits of a
lightweight rigid cone,
with the moisture resistance
of polypropylene. It is perfect
in two-way enclosures, as a subwoofer and
automotive applications. Features: •Rubber
surround •Stamped steel basket •1.25" voice coil
•18 oz. magnet Specifications: •Power capacity:
50W/80W RMS/peak •Sensitivity: 91dB (W/M)
•Impedance: 4ohm •Re: 3.4ohm •Le: 0.62mH
•Frequency response: 35Hz~5KHz •Fs: 35Hz
•Qts: 0.31 •Qes: 0.34 •Qms: 3.11 •Vas: 70.34 (liters)
•Xmax: 1.0mm •Overall frame diameter: 8.07"
•Required cutout: 7.19" •Mounting depth: 3.70"
(1-3)
$19.95
(4-up)
$13.87
Unique semitransparent
poly cone driver
provides very good
power handling
and low frequency
response for its size. It is ideal in two-way bookshelf
systems or as a compact subwoofer. Features:
•Polypropylene cone •Foam surround •Stamped
steel basket •1.5" voice coil •13.3 oz. magnet
Specifications: •Power capacity: 40W/80W
RMS/peak •Sensitivity: 91dB (W/M) •Impedance:
8ohm •Re: 7.3ohm •Le: 0.74mH •Frequency response:
40Hz~5KHz •Fs: 40Hz •Qts: 0.74 •Qes: 0.96 •Qms:
3.22 •Vas: 61.05 (liters) •Xmax: 4.25mm •Overall
frame diameter: 8.07" •Required cutout: 7.09"
•Mounting depth: 3.52"
Order #
55-1240
(1-3)
$14.95
(4-up)
$12.41
8" Treated
Cone Woofer
Rugged woofer
is perfect in
traditional two and
three-way systems
or as a compact
subwoofer.
Features: •Poly
treated paper cone
•Treated foam surround •Stamped steel frame •1.18"
voice coil •30 oz. vented magnet Specifications:
•Power capacity: 50W/100W RMS/peak •Sensitivity:
89dB (W/M) •Impedance: 8ohm •Re: 7.6ohm •Le:
1.91mH •Frequency response: 38Hz~3.5KHz •Fs:
43Hz •Qts: 0.44 •Qes: 0.48 •Qms: 5.0 •Vas: 34 (liters)
•Xmax: 3.5mm •Overall frame diameter: 8.19"
•Required cutout: 7.32" •Mounting depth: 3.35"
Order #
55-1940
(1-3)
$15.95
(4-up)
$14.68
8" Polypropylene
Cone Woofer
Considered one of
our most popular
general purpose
replacement drivers,
this woofer offers very
good power handling and low
frequency response for its size. Features:
•Polypropylene cone •Rubber surround •Stamped
steel basket •1" voice coil •17.7 oz. magnet
Specifications: •Power capacity: 70W/100W
RMS/peak •Sensitivity: 87dB (W/M) •Impedance:
8ohm •Re: 6.8ohm •Le: 0.63mH •Frequency response:
30Hz~3.5KHz •Fs: 31Hz •Qts: 0.55 •Qes: 0.77 •Qms:
1.89 •Vas: 65.76 (liters) •Xmax: 3.8mm •Overall
frame diameter: 8.07" •Required cutout: 7.19"
•Mounting depth: 3.53"
Order #
55-1190
(1-3)
$14.95
(4-up)
$13.79
8" High Excursion Woofer
This high
performance woofer
offers extremely
long throw design
for outstanding low
frequency response
thought impossible
of an 8" driver. It is
ideal in two or threeway systems, or as a
compact subwoofer. Features: •Lightweight paper
•Treated foam surround •Stamped steel basket
•2" voice coil •47 oz. magnet Specifications: •Power
capacity: 120W/240W RMS/peak •Sensitivity: 87dB
(W/M) •Impedance: 4ohm •Re: 3.4ohm •Le: 2.46mH
•Frequency response: 25Hz~1KHz •Fs: 25Hz •Qts:
0.22 •Qes: 0.22 •Qms: 13.62 •Vas: 32.46 (liters)
•Xmax: 16mm •Overall frame diameter: 8.25"
•Required cutout: 7.13" •Mounting depth: 4.50"
Order #
55-2421
(1-9)
$31.95
(4-9)
$28.31
(10-up)
$24.96
8" Polypropylene
Cone Woofer
Considered one of our
most popular general
purpose replacement
drivers, this woofer offers
very good power handling
and low frequency response
for its size. Features: •Polypropylene cone •Foam
surround •Stamped steel basket •1.5" voice coil
•17.7 oz. magnet Specifications: •Power capacity:
70W/100W RMS/peak •Sensitivity: 88dB (W/M)
•Impedance: 4ohm •Re: 3.40ohm •Le: 0.41mH
•Frequency response: 40Hz~3KHz •Fs: 40Hz
•Qts: 0.63 •Qes: 0.86 •Qms: 2.32 •Vas: 39.15 (liters)
•Xmax: 3.25mm •Overall frame diameter: 8.07"
•Required cutout: 7.19" •Mounting depth: 3.53"
Order #
55-1605
(1-3)
$11.95
(4-up)
$11.59
8" Polypropylene
Cone Woofer
Considered one of our
most popular general
purpose replacement
drivers, this woofer offers
very good power handling
and low frequency response
for its size. Features: •Polypropylene cone •Foam
surround •Stamped steel basket •1.5" voice coil
•17.7 oz. magnet Specifications: •Power capacity:
70W/100W RMS/peak •Sensitivity: 89dB (W/M)
•Impedance: 8ohm •Re: 6.8ohm •Le: 0.68mH
•Frequency response: 40Hz~3.5KHz •Fs: 40Hz
•Qts: 0.58 •Qes: 0.82 •Qms: 1.99 •Vas: 52.90 (liters)
•Xmax: 3.8mm •Overall frame diameter: 8.07"
•Required cutout: 7.19" •Mounting depth: 3.53"
Order #
55-1195
(1-3)
$14.95
(4-up)
$12.69
61⁄2" Woven Carbon
Fiber Cone Woofer
Extremely lightweight and
rigid, carbon fiber makes an
ideal woofer cone material.
The stamped frame features
a rounded over front basket for greatly improved
appearance. Features: •Carbon fiber cone •Rubber
surround •Stamped steel basket •1.25" voice coil
•17.7 oz. magnet Specifications: •Power capacity:
50W/100W RMS/peak •Sensitivity: 86dB (W/M)
•Impedance: 8ohm •Re: 6.0ohm •Le: 1.39mH
•Frequency response: 35Hz~6KHz •Fs: 35Hz
•Qts: 0.39 •Qes: 0.42 •Qms: 5.51 •Vas: 32.27 (liters)
•Xmax: 2.5mm •Overall frame diameter: 7.40"
•Required cutout: 6.50" •Mounting depth: 3.39"
Order #
55-1545
(1-3)
$24.95
(4-up)
$20.08
section
5
61⁄2" Treated Cone
Shielded Woofer
Doped paper cone and
steel phase plug provide
extremely smooth
midrange response.
Perfect in compact
two-way bookshelf and
monitor speakers as well
as multi driver array configurations. Features:
•Semi-pressed doped paper cone •Rubber surround
•Die cast basket •1.38" copper voice coil on an
aluminum former •Shielded 21 oz. magnet
Specifications: •Power capacity: 50W/100W
RMS/peak •Sensitivity: 84dB (W/M) •Impedance:
8ohm •Re: 6.6ohm •Le: 0.40mH •Frequency
response: 28Hz~2KHz •Fs: 30Hz •Qts: 0.41 •Qes:
0.47 •Qms: 3.14 •Vas: 24.04 (liters) •Xmax: 5.6mm
•Overall frame dimensions: 6.5" x 6.5" (pincushion)
•Required cutout: 5.63" •Mounting depth: 4.0"
Order #
55-2460
(1-3)
$39.95
(4-up)
$37.95
61⁄2" Die Cast Honeycomb
Cone Woofer
Patented honeycomb material
is sandwiched between two
layers of woven fiberglass to
provide superior rigidity. Die
cast aluminum frame and rubber
surround add to this drivers outstanding capabilities.
Features: •Yellow cone with synthetic dust cap
•Rubber surround •Die cast basket •1" copper
voice coil on an aluminum former •Shielded 18 oz.
magnet Specifications: •Power capacity: 55W/80W
RMS/peak •Sensitivity: 89dB (W/M) •Impedance:
8ohm •Re: 6.5ohm •Le: 1.06mH •Frequency response:
45Hz~5KHz •Fs: 45Hz •Qts: 0.50 •Qes: 0.61 •Qms:
2.74 •Vas: 22.02 (liters) •Xmax: 3.1mm •Overall
frame dimensions: 6.5" x 6.5" (rounded square)
•Required cutout: 5.75" •Mounting depth: 3.75"
Order #
55-2322
(1-3)
$27.95
(4-up)
$23.63
61⁄2" Polypropylene
Cone Woofer
Considered one of our most
popular general purpose
replacement drivers, this
woofer offers very good power
handling and low frequency response
for its size. Features: •Polypropylene cone
•Foam surround •Stamped steel basket •1"
voice coil •17.7 oz. magnet Specifications: •Power
capacity: 45W/60W RMS/peak •Sensitivity: 89dB
(W/M) •Impedance: 4ohm •Re: 3.5ohm •Le: 0.31mH
•Frequency response: 45Hz~4KHz •Fs: 45Hz
•Qts: 0.41 •Qes: 0.50 •Qms: 2.15 •Vas: 26.70
(liters) •Xmax: 2.5mm •Overall frame diameter:
6.50" •Required cutout: 5.83" •Mounting depth: 2.99"
Order #
55-1600
(1-3)
$9.95
(4-up)
$8.80
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
135
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
5
Order #
55-1520
Speaker
Components
8" Clear
Polypropylene
Cone Woofer
C52_pg_136
8/8/07
12:54 PM
Page 136
Speaker
Components
section
5
5
61⁄2" Shielded Aluminum
Cone Woofer
Compact, high performance
woofer provides outstanding
performance in a compact
driver. Lightweight aluminum
cone provides extended midrange and low frequency
response. Features: •1.4" diameter voice coil
•Rigid aluminum cone •Rubber surround •Front
and rear gasket seal •Fully shielded 20 oz. magnet
Specifications: •Power capacity: 75W/150W
RMS/peak •Sensitivity: 88dB (W/M) •Impedance:
8ohm •Re: 6.0ohm •Le: 1.3mH •Frequency response:
40Hz~10KHz •Fs: 40Hz •Qts: 0.27 •Qes: 0.30 •Qms:
2.75 •Vas: 17.4 (liters) •Xmax: 2.5mm •Overall frame
diameter: 6.50" •Required cutout: 5.83" •Mounting
depth: 3.58"
Order #
55-1860
(1-9)
$18.74
(10-49)
$16.00
(50-up)
$13.52
61⁄2" High Excursion
Aluminum Cone Woofer
Compact, high performance
woofer provides extended low
frequency response, not typical
in drivers of this size. Modeled
after our similar (and highly
acclaimed) #55-1860, this driver offers greatly
increased excursion. Features: •Increased voice coil
length and magnet gap height •1.4" diameter, four
layer copper voice coil •Rigid aluminum cone •Rubber
surround •Front and rear gasket seal •Fully shielded
23.5 oz. magnet Specifications: •Power capacity:
75W/150W RMS/peak •Sensitivity: 88dB (W/M)
•Impedance: 8ohm •Re: 5.9ohm •Le: 2.15mH
•Frequency response: 45Hz~12KHz •Fs: 47Hz
•Qts: 0.35 •Qes: 0.39 •Qms: 3.49 •Vas: 12.89 (liters)
•Xmax: 3.4mm •Overall frame diameter: 6.50"
•Required cutout: 5.83" •Mounting depth: 3.58"
Order #
55-1862
(1-3)
$19.95
(4-9)
$16.32
(10-up)
$13.79
61⁄2" Poly Treated
Cone Woofer
51⁄4" Shielded Fiberglas
Cone Woofer
Poly treated paper cone
driver combines the benefits
of a lightweight rigid cone,
with the moisture resistance
of polypropylene. It is perfect in compact enclosures,
multi driver arrays and automotive applications.
Features: •Rubber surround •Stamped steel basket
•1.25" voice coil •18 oz. magnet Specifications:
•Power capacity: 40W/80W RMS/peak •Sensitivity:
90dB (W/M) •Impedance: 8ohm •Re: 6.8ohm
•Le: 0.96mH •Frequency response: 40Hz~5KHz
•Fs: 40Hz •Qts: 0.30 •Qes: 0.34 •Qms: 2.78
•Vas: 27.57 (liters) •Xmax: 1.0mm •Overall frame
diameter: 7.09" (pincushion) •Required cutout: 5.63"
•Mounting depth: 3.21"
Compact driver is ideal in compact
bookshelf and monitor two way
systems, or as a midrange. Woven fiberglas
cone material is highly rigid and lightweight.
Features: •Fiberglas cone •Matte black
polypropylene dust cap •Rubber surround •Fully
shielded magnet structure •Stamped steel basket
•1" voice coil •10.0 oz. magnet Specifications:
•Power capacity: 30W/60W RMS/peak •Sensitivity:
88dB (W/M) •Impedance: 8ohm •Re: 7.2ohm
•Le: 0.41mH •Frequency response: 60Hz~12KHz
•Fs: 60Hz •Qts: 0.72 •Qes: 1.03 •Qms: 2.43
•Vas: 10.36 (liters) •Xmax: 2.0mm •Overall
frame diameter: 5.12" (pincushion) •Required
cutout: 4.41" •Mounting depth: 2.87"
Order #
55-1470
(1-3)
$17.95
(4-up)
$14.76
(1-3)
$14.95
(4-up)
$13.18
NET 30
Terms
136
Order Online
www.mcmelectronics.com
(4-up)
$12.41
51⁄4" Poly Treated
Cone Woofer
Considered one of our
most popular general purpose
replacement drivers, this woofer
offers very good power handling
and low frequency response for its
size. Features: •Polypropylene cone •Foam surround
•Stamped steel basket •1" voice coil •17.7 oz.
magnet Specifications: •Power capacity: 45W/60W
RMS/peak •Sensitivity: 90dB (W/M) •Impedance:
8ohm •Re: 6.8ohm •Le: 0.48mH •Frequency
response: 40Hz~3.5KHz •Fs: 40Hz •Qts: 0.50
•Qes: 0.67 •Qms: 2.00 •Vas: 30.48 (liters)
•Xmax: 2.55mm •Overall frame diameter: 6.50"
•Required cutout: 5.83" •Mounting depth: 2.99"
Poly treated paper cone driver
combines the benefits of a
lightweight rigid cone, with the
moisture resistance of polypropylene. It is perfect
in compact enclosures, multi driver arrays and
automotive applications. Features: •Rubber
surround •Stamped steel basket •1" voice coil
•13.3 oz. magnet Specifications: •Power capacity:
60W/100W RMS/peak •Sensitivity: 91dB (W/M)
•Impedance: 8ohm •Re: 7.2ohm •Le: 0.46mH
•Frequency response: 48Hz~6KHz •Fs: 65Hz
•Qts: 0.77 •Qes: 0.97 •Qms: 3.71 •Vas: 11.00 (liters)
•Xmax: 2.0mm •Overall frame diameter: 5.30"
(pincushion) •Required cutout: 4.76"
•Mounting depth: 2.56"
Order #
55-1170
(1-3)
$11.95
(4-up)
$8.77
Order #
55-1205
(1-3)
$11.95
(4-up)
$10.25
61⁄2" Clear Polypropylene
Cone Woofer
51⁄4" Treated Cone
Shielded Woofer
Unique semi transparent poly
cone driver provides very good
power handling and low frequency
response for its size. Features: •Polypropylene cone
foam surround •Stamped steel basket •1" voice coil
•11.6 oz. magnet Specifications: •Power capacity:
30W/60W RMS/peak •Sensitivity: 89dB (W/M)
•Impedance: 8ohm •Re: 7.2ohm •Le: 0.40mH
•Frequency response: 55Hz~8KHz •Fs: 55Hz
•Qts: 0.89 •Qes: 0.1.22 •Qms: 3.27 •Vas: 18.82 (liters)
•Xmax: 1.5mm •Overall frame diameter: 6.50"
•Required cutout: 5.83" •Mounting depth: 2.95"
Poly treated paper cone driver
combines the benefits of a
lightweight rigid cone, with
the moisture resistance of
polypropylene. It is perfect in compact enclosures,
multi driver arrays and automotive applications.
Features: •Rubber surround •Stamped steel basket
•1" voice coil •Fully shielded 13.3 oz. magnet
Specifications: •Power capacity: 60W/100W
RMS/peak •Sensitivity: 87dB (W/M) •Impedance:
8ohm •Re: 6.9ohm •Le: 0.39mH •Frequency
response: 70Hz~6KHz •Fs: 71Hz •Qts: 0.74 •Qes:
0.95 •Qms: 3.45 •Vas: 6.7 (liters) •Xmax: 2.0mm
•Overall frame diameter: 5.30" (pincushion)
•Required cutout: 4.76" •Mounting depth: 3.31"
(1-3)
$11.95
(4-up)
$9.13
61⁄2" Poly Treated
Cone Woofer
Order #
55-1515
(1-3)
$14.46
61⁄2" Polypropylene
Cone Woofer
Order #
55-1235
Poly treated paper cone
driver combines the benefits
of a lightweight rigid cone,
with the moisture resistance
of polypropylene. It is perfect
in compact two-way enclosures and in automotive
applications. Features: •Rubber surround
•Stamped steel basket •1.25" voice coil •18 oz.
magnet Specifications: •Power capacity: 40W/80W
RMS/peak •Sensitivity: 90dB (W/M) •Impedance:
4ohm •Re: 3.4ohm •Le: 0.67mH •Frequency response:
40Hz~5KHz •Fs: 40Hz •Qts: 0.26 •Qes: 0.28 •Qms:
3.11 •Vas: 32.07 (liters) •Xmax: 1.0mm •Overall
frame diameter: 6.50" •Required cutout: 5.83"
•Mounting depth: 3.15"
Order #
55-1505
Order #
55-1206
51⁄4" Treated Cone
Shielded Woofer
Doped paper cone and steel
phase plug provide extremely
smooth midrange response.
Perfect in compact two-way
bookshelf and monitor speakers as well as multi
driver array configurations. Features: •Semi-pressed
doped paper cone •Rubber surround •Die cast basket
•1.38" copper voice coil on an aluminum former
•Shielded 18 oz. magnet Specifications: •Power
capacity: 50W/100W RMS/peak •Sensitivity: 88dB
(W/M) •Impedance: 8ohm •Re: 6.5ohm •Le: 0.46mH
•Frequency response: 38Hz~3.5KHz •Fs: 40Hz •Qts:
0.34 •Qes: 0.36 •Qms: 5.32 •Vas: 19.89 (liters)
•Xmax: 3.3mm •Overall frame dimensions: 5.25" x
5.25" (pincushion) •Required cutout: 5.88" •Mounting
depth: 3.62"
Order #
55-2455
(1-3)
$32.95
(4-up)
$31.39
(1-3)
$14.95
(4-up)
$12.54
5" Shielded
Aluminum Cone Woofer
High performance woofer
provides outstanding
performance in a compact
driver. Lightweight aluminum cone provides extended
midrange and low frequency response. Features:
•1" diameter voice coil •Rigid aluminum cone
•Rubber surround •Fully shielded 11.6 oz. magnet
Specifications: •Power capacity: 50W/100W
RMS/peak •Sensitivity: 87dB (W/M) •Impedance:
8ohm •Re: 6.5ohm •Le: 1.28mH •Frequency response:
45Hz~15KHz •Fs: 45Hz •Qts: 0.33 •Qes: 0.37 •Qms:
3.24 •Vas: 12.07 (liters) •Xmax: 2.2mm •Overall
frame diameter: 5.14" •Required cutout: 4.51"
•Mounting depth: 3.03"
Order #
55-1855
(1-9)
$14.95
(10-49)
$12.08
(50-up)
$10.46
C52_pg_137
8/8/07
12:53 PM
Page 137
Speaker
Components
4" Woven Carbon
Fiber Cone Woofer
Hot Spot 5"
Replacement
Speaker
Used in the world famous Hot Spot monitor speaker,
this driver has a wide variety of applications as
a mid and full range speaker. Features: •Die cast
aluminum frame •Shielded neodymium magnet
•Underhung 1" edge wound voice coil on a kapton
former •Ferrofluid cooling Specifications: •Power
capacity: 100W/200W RMS/peak •Frequency
response: 150Hz~18KHz •Impedance: 8ohm
•Sensitivity: 95dB (W/M) •Magnet weight: 7.4 oz.
•Fs: 130Hz •Qts: 0.42 •Qms: 1.14 •Qes: 0.66
•Vas: 1.89 liter
(1–3)
$37.95
Order #
55-1840
(1-9)
$16.95
(10-49)
$12.41
(4–9)
$33.53
4" Shielded Fiberglass
Cone Woofer
5" Aluminum Cone Woofer
Versatile driver offers high
power capacity and wide
frequency response making
it popular in a variety of
applications including compact studio monitors.
Features: •Aluminum cone •Synthetic dust cap
•Rubber surround •Stamped steel basket •1" voice
coil •15.6 oz. magnet Specifications: •Power
capacity: 50W/100W RMS/peak •Sensitivity: 87dB
(W/M) •Impedance: 8ohm •Re: 6.7ohm •Le: 0.59mH
•Frequency response: 55Hz~17KHz •Fs: 55Hz
•Qts: 0.40 •Qes: 0.51 •Qms: 1.87 •Vas: 10.04 (liters)
•Xmax: 2.0mm •Overall frame diameter: 5.14"
•Required cutout: 4.21" •Mounting depth: 2.52"
Order #
55-1870
(1-9)
$12.95
(10-49)
$10.36
Compact driver is ideal in compact
bookshelf and monitor two-way systems,
or as a midrange. Woven fiberglas cone material
is highly rigid and lightweight. Features:
•Fiberglas cone •Matte black polypropylene dust
cap •Rubber surround •Fully shielded magnet
structure •Stamped steel basket •1" voice coil
•5.4 oz. magnet Specifications: •Power capacity:
20W/40W RMS/peak •Sensitivity: 86dB (W/M)
•Impedance: 8ohm •Re: 7.1ohm •Le: 0.24mH
•Frequency response: 75Hz~12KHz •Fs: 75Hz
•Qts: 0.99 •Qes: 0.1.51 •Qms: 2.84 •Vas: 5.05 (liters)
•Xmax: 1.00mm •Overall frame diameter: 4.13"
(pincushion) •Required cutout: 4.01"
•Mounting depth: 2.40"
Order #
55-1500
(1-3)
$10.98
(4-up)
$10.25
(50-up)
$8.82
Full range speaker is ideal for all
sound reinforcement applications, especially
musical instrument. It is especially suitable for use in
guitar and monitor cabinets. Features: •Aluminum
cone •Treated cloth surround •Stamped steel basket
•0.75" voice coil •8 oz. magnet Specifications:
•Power capacity: 30W/60W RMS/peak •Sensitivity:
89dB (W/M) •Impedance: 8ohm •Re: 7.1ohm •Le:
0.23mH •Frequency response: 120Hz~15KHz •Fs:
120Hz •Qts: 0.94 •Qes: 1.32 •Qms: 3.19 •Vas: 5.18
(liters) •Xmax: 1.25mm •Overall frame diameter:
5.16" •Required cutout: 4.21" •Mounting depth: 2.00"
Order #
55-1290
(1-3)
$8.95
(4-up)
$7.93
Versatile driver offers wide
frequency response making it ideal
in applications including full range,
mid range, and midbass, in compact studio monitors,
center channel speakers and multi driver arrays.
Features: •Aluminum cone •Synthetic dust cap
•Rubber surround •Fully shielded magnet structure
•Stamped steel basket •1" copper voice coil •8.6 oz.
magnet Specifications: •Power capacity: 20W/40W
RMS/peak •Sensitivity: 85dB (W/M) •Impedance:
4ohm •Re: 3.3ohm •Le: 0.48mH •Frequency
response: 50Hz~17KHz •Fs: 54.1Hz •Qts: 0.32
•Qes: 0.38 •Qms: 2.05 •Vas: 5.14 (liters) •Xmax:
2.75mm •Overall frame diameter: 4.13" (pincushion)
•Required cutout: 3.66" •Mounting depth: 2.80"
Order #
55-1854
(1-3)
$11.75
(4-up)
$10.68
4" Shielded Aluminum
Cone Woofer
5" Full Range Monitor Driver
Versatile driver offers high power
capacity and wide frequency
response making it popular in a
variety of applications including compact
studio and stage monitors. Features: •Paper cone
•Treated cloth surround •Stamped steel basket •1"
voice coil •17.7 oz. magnet Specifications: •Power
capacity: 50W/100W RMS/peak •Sensitivity: 91dB
(W/M) •Impedance: 8ohm •Re: 6.9ohm •Le: 0.59mH
•Frequency response: 80Hz~15KHz •Fs: 100Hz •Qts:
0.65 •Qes: 0.88 •Qms: 2.44 •Vas: 3.86 (liters) •Xmax:
1.25mm •Overall frame diameter: 5.18" •Required
cutout: 4.21" •Mounting depth: 2.52"
Order #
55-1595
(1-3)
$11.95
(4-up)
$10.25
Versatile driver offers wide
frequency response making it ideal
in applications including full range,
mid range, and midbass, in compact studio monitors,
center channel speakers and multi driver arrays.
Features: •Aluminum cone •Synthetic dust cap
•Rubber surround •Fully shielded magnet structure
•Stamped steel basket •1" copper voice coil •8.6 oz.
magnet Specifications: •Power capacity: 20W/40W
RMS/peak •Sensitivity: 86dB (W/M) •Impedance:
8ohm •Re: 6.8ohm •Le: 0.78mH •Frequency
response: 50Hz~17KHz •Fs: 60.0Hz •Qts: 0.38
•Qes: 0.46 •Qms: 2.41 •Vas: 5.00 (liters) •Xmax:
2.75mm •Overall frame diameter: 4.13" (pincushion)
•Required cutout: 3.66" •Mounting depth: 2.80"
Order #
55-1853
(1-3)
$12.95
5
41⁄2" Full Range Driver
•Rigid paper cone •Treated
cloth surround •Stamped
steel frame •9.2 oz. magnet plus
cancellation magnet •1" voice
coil Specifications: •Power
capacity: 20W/40W RMS/peak •Frequency response:
95Hz~15KHz •Fs: 96Hz •Impedance: 8ohm •SPL:
89dB (1W/1M) •Re: 7.04ohm•Qes: 0.75 •Qms: 1.74
•Qts: 0.52 •Vas (liters): 4.76 •Xmax: 1.1mm •Sd:
66.48cm2 Dimensions: •Outer frame (pincushion):
4.49" x 4.49" •Required cutout: 4.06" •Depth: 2.19"
Order #
55-2615
(1-3)
$13.95
(4-up)
$10.68
(4-up)
$11.07
41⁄2" Full Range Driver
Ideal in single driver enclosures,
as a midbass in compact two-way
bookshelf or monitors, or as a
midrange in a large three-way.
Features: •Rigid paper cone •Treated foam surround
•Stamped steel frame •1" voice coil •9.3 oz. magnet
Specifications: •Power capacity: 20W/30W
RMS/peak •Sensitivity: 96dB (1W/1M) •Impedance:
8ohm •Re: 7.6ohm •Le: 0.25mH •Frequency response:
68Hz~15KHz •Fs: 68Hz •Qts: 0.38 •Qes: 0.47 •Qms:
1.40 •VAS (liters): 8.7 •Xmax: 1.0mm •Outer frame
dimensions: 4.5" x 4.5" (pincushion) •Required cutout:
4.1" diameter •Mounting depth: 2.38"
•Mfr. #A11EC80-02F
Order #
51-075
4" Shielded Aluminum
Cone Woofer
5" Aluminum Cone
Musical Instrument Speaker
section
(1–3)
$11.95
(4–up)
$11.07
8" Full Range Driver
Originally intended
for use in large 8" metal
ceiling baffles, this speaker
will almost certainly be an
upgrade to existing drivers in
use in distributed background
music/paging systems. It is also ideal in single driver
enclosures or as a midbass in two-way bookshelf
speakers or monitors. Features: Reinforced paper
cone •Treated foam surround •Center whizzer cone
for extended high frequency response •Stamped steel
frame •1.5" voice coil •20 oz. magnet Specifications:
•Power capacity: 60W/100W RMS/peak •Sensitivity:
90dB (1W/1M) •Impedance: 8ohm •Re: 6.6ohm •Le:
0.60mH •Frequency response: 36Hz~17KHz •Fs:
40Hz •Qts: 0.45 •Qes: 0.56 •Qms: 2.40 •VAS (liters):
56 •Xmax: 3.0mm •Overall frame diameter: 8"
•Required cutout: 7.13" •Mounting depth: 4.0"
•Mfr. #B20FU20-51FW
Order #
55-855
(1–3)
$26.95
(4–up)
$23.43
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
137
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
5
Order #
55-1906
Extremely lightweight and rigid,
carbon fiber makes an ideal woofer
cone material. The stamped frame features a rounded
over front basket for greatly improved appearance.
Features: •Carbon fiber cone •Rubber surround
•Stamped steel basket •1" voice coil •9.6 oz.
magnet Specifications: •Power capacity: 40W/60W
RMS/peak •Sensitivity: 85dB (W/M) •Impedance:
8ohm •Re: 6.7ohm •Le: 0.32mH •Frequency
response: 90Hz~10KHz •Fs: 90Hz •Qts: 0.52 •Qes:
0.73 •Qms: 2.23 •Vas: 2.1 (liters) •Xmax: 2.0mm
•Overall frame diameter: 4.55" •Required cutout:
3.64" •Mounting depth: 2.56"
C52_pg_138
8/8/07
12:56 PM
Page 138
Speaker
Components
Low Frequency PA Speakers
These drivers are perfect for new speaker design or replacement use when high
power capacity, durability and low cost are important. They are perfect for main,
monitor or musical instrument use. Features: •Stamped steel basket •45 oz.
magnet •Vented pole piece •Laminated paper cone •Treated accordion surround
•Heavy foam front gasket Common specifications: •Power capacity: 100W/200W
RMS/peak •Voice coil: 2" •Impedance: 8ohm
section
5
Order #
55-2260
55-2261
Size
10"
12"
Fs
50Hz
35Hz
Re
7.20ohm
7.20ohm
Order #
55-2260
55-2261
Size
10"
12"
Frequency
Response
50Hz~4KHz
35Hz~2.3KHz
Le
0.81mH
1.38mH
Qms
3.60
3.44
Qes
0.78
0.77
Overall
Diameter
10.00"
11.97"
Sensitivity
90dB
94dB
Qts
0.65
0.63
Baffle Hole
Diameter
9.13"
11.10"
Vas
2.34 ft3
3.32ft3
Mounting
Depth
4.25"
4.88"
5
Dual Voice Coil Sub Woofers
These woofers are great for entertainment systems and home stereo! The dual voice coil woofers can add a low frequency dimension not
generally found in most stock sound systems. They also make the perfect woofer complement for most satellite systems.
Order #
55-930
55-935
55-940
Speaker
Size
8"
10"
12"
Pioneer
B20FU20-52D
A25GU25-51D
A30GU30-55D
Watts/Coil
RMS/Peak
60W/120W
80W/150W
100W/200W
Frequency
Response
32~8KHz
27~2KHz
24~1.5KHz
Imp/
Each
coil
6
6
6
SPL
(dB)
90
91
94
Voice
Coil
11⁄2"
2.0"
2.0"
Measurements
(A) x (B) x (C)
7.125" x 8.07" x 4.000"
9.170" x 10.10" x 4.690
10.750" x 12.10" x5.340"
Magnet
Wt.(oz.)
20
25
30
Qts.
.22
.21
.21
Vas
fs
(cu. ft.) (Hz)
(1-3)
1.84
32 $26.01
3.18
27
33.28
9.78
24
41.66
(4-up)
$24.71
31.16
39.27
Rubber Surround Woofer
The outside edge of the cone is suspended by a rubber half roll to allow sound to emanate distortion-free., Kapton® voice coil and
vented pole piece add dependability and reduce voice coil operating temperature to make a truly state-of-the-art woofer line.
Order #
55-975
55-980
55-985
Pioneer
B20GR30-51F-Q
W25GR31-51F
A30IR50-51F
Speaker
Size
8"
10"
12"
RMS
Watts
80W
90W
150W
Peak
Watts
150W
150W
200W
Frequency
Response
31~7KHz
26~6KHz
19~5KHz
Imp/
ohm
8
8
8
SPL
(dB)
91
90
91
Voice
Coil
2.0"
2.0"
2.5"
Measurements
(A) x (B) x (C)
7.28" x 8.125" x 4.25"
9.20" x 10.125" x 4.50"
12.00" x 10.750" x 5.47"
Magnet
Wt.(oz.)
30
30
50
Qts.
.26
.34
.25
Vas
fs
(cu. ft.) (Hz)
2.44
31
4.77
26
11.90
19
(1-3)
(4-up)
$35.95 $31.88
47.95 42.49
65.95 59.48
Paper Cone Woofer
Pioneer’s line of paper cone woofers has become the value leaders of the industry. Using copper wire on aluminum bobbins bonded with high
temperature polymide-imide adhesive, barium ferrite magnets, and long throw voice coils. These speakers can withstand the stress of low
frequency amplification and reproduction.
Order #
55-1230
55-790
55-595
55-510
Pioneer
C16LU20-51F
B20FU20-54F
A25FU20-53F
A30FU20-52F
Speaker
Size
61⁄2"
8"
10"
12"
RMS
Watts
60
60
60
60
Peak
Watts
120
90
85
85
Frequency
Response
57~7KHz
28~4KHz
35~3.5KHz
30~2.5KHz
Imp/
ohm
8
8
8
8
SPL
(dB)
93
92
95
92
Voice
Measurements
Magnet
Vas
fs
Coil
(A) x (B) x (C)
Wt.(oz.) Qts. (cu. ft.) (Hz)
(1-3)
1.25" 5.600" x 6.500" x 3.100"
20
.220 .53
57 $20.50
1.50" 7.125" x 8.060" x 3.875"
20
.310 1.93
35
23.99
1.50" 9.190" x 10.125" x 4.750"
20
.269 8.80
35
27.75
1.50" 10.690" x 12.000" x 5.500"
20
.360 11.80
30
35.95
(4-up)
$19.06
22.98
24.98
34.25
Poly Woofer Series
This translucent cone woofer can be found in many of today’s more popular stereo speaker cabinets. These speakers can be used to replace
worn-out or damaged woofers. You can also use them when creating your own cabinet design. The low transient distortion, uniform frequency
response and humidity resistance characteristics make them extremely versatile speakers.
Order #
55-505
55-795
55-515
55-600
Speaker
Size
61⁄2"
10"
12"
15"
Pioneer
C16EU20-51D
A25FU30-51D
A30GU40-51D
A38GU40-51D
RMS
Watts
60
70
100
100
Peak
Watts
90
140
140
144
Frequency
Response
55~3KHz
26~2.5KHz
25~1.5KHz
25~2.5KHz
Imp/
ohm
6
6
6
6
SPL
(dB)
91
92
93
92
Voice
Coil
1"
11⁄2"
2"
2"
Measurements
(A) x (B) x (C)
5.56" x 6.5" x 2.875"
9.06" x 10.1" x 4.81"
10.75" x 12.0" x 5.34"
14.0" x 15.25" x 6.375"
Magnet
Wt.(oz.)
20
30
40
40
Qts.
.63
.213
.17
.297
Vas
fs
(cu. ft.) (Hz)
(1-3)
.57
55 $19.95
6.7
30
37.95
10.8
25
52.95
9.7
25
54.95
(4-up)
$18.47
34.28
48.67
52.48
Sound Reinforcement Woofers
These accordion type cloth surround woofers deliver brassy bass response and tonal clarity that are great for musical instrument amps, PA, or
theater. The list goes on and on. The heavy magnet structure and large 2" voice coil make them perfect for most any application.
Order # Pioneer
55-545 A30GC50-52FQ
55-550 A38GC50-52FQ
Speaker
Size
12"
15"
RMS
Watts
125
125
Peak
Watts
175
175
Frequency
Response
45~5KHz
40~5KHz
NET 30
Terms
138
Order Online
www.mcmelectronics.com
Imp/
ohm
8
8
SPL
(dB)
97
98
Voice
Coil
2"
2"
Measurements
(A) x (B) x (C)
10.75" x 12.125" x 5.10"
13.94" x 15.250" x 6.25"
Magnet
Vas
fs
Wt.(oz.) Qts. (cu. ft.) (Hz)
50
.44 6.36
45
50
.55 6.98
40
(1-3)
(4-up)
$62.37 $60.35
71.95 69.95
BL
4.6 T-M
5.9 T-M
(1-3)
$21.95
24.95
Mms
38.65g
67.75g
(4-up)
$16.68
20.07
C52_pg_139
8/8/07
12:55 PM
Page 139
12" Passive
Radiator
53⁄4" Woven Kevlar
Cone Woofer
•Designed as an
aesthetic match
to the #55-2595
12" poly cone
woofer •Rigid
polypropylene
cone •Treated polyurethane foam surround •Stamped
steel frame Specifications: •Fs: 17.4Hz •Qms: 6.17
•Vas (liters): 150 •Sd: 483cm2 Dimensions: •Overall
frame diameter: 12.04" •Required cutout: 10.75"
•Depth: 4.0"
•Attractive and rigid yellow
Kevlar cone •Rubber surround
•Die cast frame •Shielded
magnet structure •9.9 oz.
magnet •1.18" voice coil Specifications: •Power
capacity: 25W/50W RMS/peak •Frequency response:
60Hz~9KHz •Fs: 63Hz •Impedance: 6ohm •SPL:
89dB (1W/1M) •Re: 5.24ohm •Qes: 0.54 •Qms: 6.17
•Qts: 0.5 •Vas (liters): 6.58 •Xmax: 2.95mm •Sd:
86.59cm2 Dimensions: •Overall frame diameter:
5.78" •Required cutout: 4.44" •Depth: 3.02"
Order #
55-2600
(1-3)
$41.95
(4-up)
$36.00
Order #
55-2585
(1-3)
$74.95
(4-up)
$61.75
41⁄2" Woven Kevlar
Full Range Driver
•Rigid
polypropylene
cone •Treated
polyurethane
foam surround
•Rigid stamped
steel frame •50
oz. magnet plus cancellation magnet •2.5" voice
coil Specifications: •Power capacity: 100/200W
RMS/peak •Frequency response: 24Hz~3KHz
•Fs: 25Hz •Impedance: 4ohm •SPL: 90dB (1W/1M)
•Re: 3.24ohm •Qes: 0.44 •Qms: 8.53 •Qts: 0.42
•Vas (liters): 122.81 •Xmax: 8.5mm •Sd: 490.87cm2
Dimensions: •Overall frame diameter: 12.04"
•Required cutout: 10.75" •Depth: 6.52"
•Attractive and rigid yellow
Kevlar cone •Rubber surround
•Rigid stamped steel frame
•Shielded magnet structure
•9.3 oz. magnet •1" voice coil
Specifications: •Power capacity: 25W/50W
RMS/peak •Frequency response: 110Hz~20KHz
•Fs: 107Hz •Impedance: 6ohm •SPL: 84dB (1W/1M)
•Re: 4.4ohm •Qes: 0.70 •Qms: 5.76 •Qts: 0.62
•Vas (liters): 0.79 •Xmax: 3.0mm •Sd: 44.18cm2
Dimensions: •Overall frame diameter: 4.41"
•Required cutout: 3.36" •Depth: 3.02"
Order #
55-2595
(1-3)
$97.95
Order #
55-2590
(1-3)
$47.95
(4-up)
$41.15
(4-up)
$82.35
•Designed as an
aesthetic match to
the #55-2605 10"
woofer •Lightweight
laminated paper cone •Treated polyurethane
foam surround •Rigid stamped steel frame
Specifications: •Fs: 29.8Hz •Qms: 15.4 •Vas (liters):
42.5 •Sd: 330cm2 Dimensions: •Overall frame
diameter: 10.16" •Required cutout: 9.06"
•Depth: 3.34"
Order #
55-2610
(1-3)
$39.95
(4-up)
$31.88
10" Shielded
Woofer
•Lightweight
laminated paper
cone •Treated
polyurethane foam
surround •Rigid
stamped steel frame
•30 oz. magnet plus cancellation magnet •2" voice
coil Specifications: •Power capacity: 100/200W
RMS/peak •Frequency response: 43Hz~2KHz
•Fs: 39Hz •Impedance: 4ohm •SPL: 87dB (1W/1M)
•Re: 3.61ohm •Qes: 0.38 •Qms: 9.44 •Qts: 0.37
•Vas (liters): 48.46 •Xmax: 4.0mm •Sd: 346.36cm2
Dimensions: •Overall frame diameter: 10.16"
•Required cutout: 9.06" •Depth: 5.46"
Order #
55-2605
(1-3)
$65.95
(4-up)
$55.57
•Ideal for satellite,
main stereo and
automotive speaker
systems •5" driver
provides a broad frequency
range •Magnet weight: 13.3
oz. •1" voice coil •8ohm
•Power handling: RMS/peak
50W/70W •Sensitivity SPL 1W/1 meter: 93dB
•#54-310 has a free air resonance of 104Hz,
Qts of .85 and Vas of .12 cu. ft.
Order #
54-310
54-360
Back
Type
Open
Sealed
Frequency
Response
100~10KHz
500~10KHz
(1-3)
$9.63
9.63
(4-up)
$8.26
8.26
•Sealed back allows
easy incorporation into
enclosures without the
need for internal isolation
•Ferrofluid cooled voice coil
provides increased power
capacity •Paper cone •Treated accordian
cloth surround Specifications: •Power capacity:
50W/75W RMS/peak •Frequency response:
500Hz~14KHz •Sensitivity: 90db (W/M) •Magnet
weight: 14 oz. •Voice coil diameter: 1" •Impedance:
8ohm •Overall frame diameter: 51⁄4" •Required cutout:
41⁄8" •Mounting depth: 21⁄4" •Mfr. #FB11EC14-51F
(1-3)
$16.11
(4-up)
$15.55
High Performance Midwoofers
Designed for demanding stage applications, these professional midbass speakers
are also perfect for use as midrange speakers, or in small two–way systems that
utilize a subwoofer. Oversized magnet structures and 1" aluminum voice coils
ensure performance and reliability in demanding situations. Features: •Heavy
treated paper cone •Treated foam suspension •High temperature aluminum 8ohm
voice coils. •Three year manufacturers warranty
Order #
55-2360
55-2361
Size
51⁄4"
61⁄2"
Power Capacity
(RMS/peak)
100W/200W
125W/250W
Magnet
15 oz.
25 oz.
Frequency
Response
80Hz~7KHz
70Hz~9KHz
SPL
90.0dB
92.0dB
51⁄4" Deep Back Midrange
Sealed back midrange may be
mounted in existing three way
cabinets, without the need for an
isolated midrange cavity.
Features: •Paper cone •Treated
fabric surround •Attached rear enclosure with
internal damping material •Ferro fluid cooled voice
coil Specifications: •Power capacity: 50W/100W
RMS/peak •Frequency response: 300Hz~5KHz
•Nominal impedance: 8ohm •Voice coil diameter: 1"
•Magnet weight: 9.3 oz. •Sensitivity: 94dB (W/M)
•Re: 7.1ohm •Fs: 325Hz •Qms: 2.58 •Qes: 1.85
•Qts: 1.08 •Overall frame diameter: 51⁄4" •Required
cutout: 41⁄8" •Mounting depth: 33⁄4" •Pioneer model
#B11EC80-02F
Order #
54-120
(4-up)
$12.88
6" Sealed Back
Midrange
(4–up)
$11.76
13.21
(1-3)
$18.95
(4-up)
$17.46
4" Midrange
•Pioneer sealed back
speaker replacement
for Sharp, Curtis Mathes
and others •Magnet weight:
2.0 oz. •Voice coil: 9⁄16" •8ohm •Power handling:
RMS/peak 35W/70W •Sensitivity SPL 1W/1
meter: 90dB •Frequency response: 750Hz~10KHz
•Mounting dimensions: 33⁄8" hole to hole
•Perfect replacement for Pioneer #FE10BP45-25F
and Sharp #CP8800
Order #
54-270
(1-3)
$5.04
(4-up)
$4.88
4" Sealed Back Midrange
This sealed back
design helps prevent
distortion and
unwanted interference
from the woofer.
Magnet weight: 3.7 oz.
Voice coil: 3⁄4".
Impedance: 8ohm.
Power handling:
RMS/peak 50W/100W. Sensitivity SPL 1W/1 meter:
92dB. Frequency response: 700~7KHz. Mounting
dimensions: 411⁄16" x 411⁄16". Pioneer #FD10DP61-06F.
Order #
54-340
(1–3)
$12.69
14.25
(1-3)
$14.50
Order #
54-220
5" Sealed Back Midrange
Order #
54-170
5
•Sealed back allows
easy incorporation into
enclosures without the
need for internal
isolation •Ferrofluid cooled voice coil provides
increased power capacity •Polypropylene cone
•Foam surround Specifications: •Power capacity:
50W/75W RMS/peak •Frequency response:
500Hz~6KHz •Sensitivity: 92db (W/M) •Magnet
weight: 14 oz. •Voice coil diameter: 1" •Impedance:
8ohm •Overall frame diameter: 57⁄8" •Required
cutout: 43⁄4"•Mounting depth: 21⁄2"
•Mfr. #FB12EU14-51F
5" Poly Paper
Cone Midrange
10" Passive
Radiator
section
(1-3)
$7.06
(4-up)
$6.54
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
139
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
5
12" Poly Cone
Woofer
Speaker
Components
C52_pg_140
8/8/07
12:57 PM
Page 140
Vintage Jensen Musical Instrument Speakers
Speaker
Components
Tooled from specifications developed by Jensen years ago, these speakers accurately deliver the
performance and sonic characteristics of those popular original equipment drivers. The Jensen “C”
Series, developed in the 1960s, utilizes lower cost ceramic magnets to meet the ever emerging
“pop music” needs of the time.
section
5
(1-3)
$31.89
5
Physical characteristics: •Overall
diameter: 12.05"
•Required
cutout:
10.91" •Depth: 4.96"
•Power capacity:
100W/200W RMS/music
•Sensitivity: 99.1dB
1W/1M •Voice coil: 2.0"
copper on kapton former
•Nominal impedance: 8ohm
•Magnet weight: 40 oz.
•Cone material: Paper cone with
integrated paper surround, and cloth dome
Thiele-Small parameters: •Re: 7.0Ω •Fs: 104.0Hz
•Qms: 20.41 •Qes: 0.67 •Qts: 0.65 •Mms: 28.8g
•Cms: 82.0µm/N •Vas: 27.6 •Xmax: 1.00mm •Sd:
490.9cm2 •Le: 0.84mH
Physical
characteristics:
•Overall diameter:
10.20" •Required cutout: 9.09" •Depth: 3.48" •Power
capacity: 25W/50W RMS/music •Sensitivity: 94.7dB
1W/1M •Voice coil: 1" copper on kapton former
•Nominal impedance: 8ohm •Magnet weight: 9 oz.
•Cone material: Paper cone with integrated paper
surround, and solid paper dome Thiele-Small
parameters: •Re: 6.60Ω •Fs: 96.0Hz •Qms:
10.56 •Qes: 1.66 •Qts: 1.44 •Mms: 14.1g •Cms:
194.0µm/N •Vas: 29.7 •Xmax: 0.8mm •Sd: 330.0cm2
•Le: 0.53mH
Physical characteristics: •Overall
diameter: 12.05" •Required cutout:
10.91" •Depth: 4.15" •Power
capacity: 25W/50W RMS/music
•Sensitivity: 93.8dB 1W/1M
•Voice coil: 1" copper on kapton
former •Nominal impedance:
8ohm •Magnet weight:
9 oz. •Cone material: Paper
cone with integrated paper
surround, and felt dome
Thiele-Small parameters:
•Re: 6.50Ω •Fs: 74.0Hz •Qms:
21.48 •Qes: 2.06 •Qts: 1.88
•Mms: 24.6g •Cms: 187.0µm/N •Vas:
63.2 •Xmax: 0.8mm •Sd: 490.8cm2 •Le: 0.49mH
Order #
55-12110
C12K 12" Guitar Loudspeaker
C10R 10" Guitar
Loudspeaker
C12R 12" Guitar Loudspeaker
Order #
55-12100
(1-3)
$27.29
(4-up)
$22.44
(4-up)
$26.05
Order #
55-12125
(1-3)
$84.95
C12Q 12" Guitar Loudspeaker
C12N 12" Guitar Loudspeaker
Physical characteristics: •Overall
diameter: 12.05" •Required cutout:
10.91" •Depth: 4.19" •Power
capacity: 35W/70W RMS/music
•Sensitivity: 93.9dB 1W/1M
•Voice coil: 1.25" copper on
kapton former •Nominal
impedance: 8ohm •Magnet
weight: 13 oz. •Cone
material: Paper cone
with integrated paper
surround, and solid paper
dome Thiele-Small
parameters: •Re: 6.50Ω •Fs:
84.0Hz •Qms: 13.26 •Qes: 1.97 •Qts:
1.97 •Mms: 28.2g •Cms: 126.0µm/N •Vas: 42.8
•Xmax: 1.50mm •Sd: 490.8cm2 •Le: 0.62mH
Order #
55-12115
(1-3)
$39.39
(4-up)
$70.09
Physical characteristics: •Overall
diameter: 12.05" •Required cutout:
10.91" •Depth: 4.76" •Power
capacity: 50W/100W RMS/music
•Sensitivity: 98.4dB 1W/1M •Voice
coil: 1.5" copper on kapton
former •Nominal impedance:
8ohm •Magnet weight: 25 oz.
•Cone material: Paper cone
with integrated paper
surround, and solid paper dome
Thiele-Small parameters:
•Re: 6.50Ω •Fs: 112.0Hz •Qms:
7.01 •Qes: 1.05 •Qts: 0.92 •Mms:
25.2g •Cms: 82.0µm/N •Vas: 27.6
•Xmax: 1.00mm •Sd: 490.8cm2 •Le: 0.90mH
C10Q 10"
Guitar Loudspeaker
Physical
characteristics: •Overall
diameter: 10.20" •Required
cutout: 9.09" •Depth: 3.60" •Power capacity:
35W/70W RMS/music •Sensitivity: 95.2dB 1W/1M
•Voice coil: 1.25" copper on epotex former •Nominal
impedance: 8ohm •Magnet weight: 13 oz. •Cone
material: Paper cone with integrated paper
surround, and solid paper dome Thiele-Small
parameters: •Re: 6.00Ω •Fs: 96.0Hz •Qms:
11.57 •Qes: 1.34 •Qts: 1.20 •Mms: 16.6g •Cms:
168.0µm/N •Vas: 25.7 •Xmax: 1.5mm •Sd: 330.0cm2
•Le: 0.62mH
Order #
55-12105
(4-up)
$32.33
(1-3)
$32.29
Order #
55-12120
(4-up)
$26.56
(1-3)
$56.39
(4-up)
$46.34
Replacement Pro Audio Woofers
These high-efficiency, high power capacity drivers are perfect as replacements in stage speakers, guitar amps,
and monitors. Paper cones, treated accordion cloth surrounds and heavy duty stamped baskets combine to
provide characteristics very similar to most OEM drivers. Features:
•Ribbed paper cone for added strength •Aluminum voice coil on Kapton
former •8ohm impedance
Order #
55-2516
55-2517
55-2520
Model #
WH8
WH10
WH12
Size
8"
10"
12"
Frequency
Response
75Hz~5KHz
74Hz~5KHz
58Hz~5KHz
Power
Capacity
RMS
100W
125W
150W
Peak
200W
250W
300W
Magnet
Weight
25 oz.
25 oz.
25 oz.
(1-3)
$9.95
14.95
19.95
Professional Replacement Woofers
With a size and power capacity to suit any need, the Pyle Driver Pro® woofer series offers outstanding performance for the dollar.
Sizes range from 12"~18", with power capacities of up to 600W RMS (1500W peak). These are perfect for upgrade, replacement and new
designs in PA, musical instrument and high power sound reinforcement applications. Features: •Large Kapton voice coil •Vented pole
piece •Heavy paper cone with treated fabric accordion surround •Flat progressive spider •#55-2295, 2300 and 2305 have die cast
aluminum baskets, all others are stamped steel •All models 8ohm
Mfr. #
PYM1255
PYM1278
PYM1298
PYM1578
PYM15128
PYM1878
PYM18128
Power Capacity
(RMS/peak)
300W/700W
400W/1000W
600W/1200W
400W/1000W
600W/1500W
400W/1000W
600W/1500W
Frequency
response
35Hz~2.5KHz
55Hz~5KHz
40Hz~4KHz
40Hz~4KHz
40Hz~4KHz
40Hz~4KHz
40Hz~4KHz
Re
5.5Ω
6.42Ω
5.28Ω
6.99Ω
5.33Ω
5.28Ω
5.55Ω
NET 30
Terms
140
Order Online
www.mcmelectronics.com
Le
.64mH
.77mH
.84mH
0.86mH
1.42mH
1.15mH
1.57mH
Order #
55-2270
55-2275
55-2280
55-2290
55-2295
55-2300
55-2305
Qms
5.48
7.26
5.69
6.56
6.77
4.65
5.59
Qes
0.720
0.510
0.29
0.530
0.420
0.500
0.300
Qts
.640
0.480
0.28
0.490
0.400
0.450
0.280
Mfr #
PYM1255
PYM1278
PYM1298
PYM1578
PYM15128
PYM1878
PYM18128
Xmax
2.40mm
1.80mm
3.20mm
2.70mm
5.50mm
3.70mm
5.50mm
Size
12"
12"
12"
15"
15"
18"
18"
Mms
31.00g
41.63g
38.40g
54.89g
89.93g
98.60g
143.78g
Cms
.3124mm/N
0.154mm/N
0.3008mm/N
0.2846mm/N
0.1500mm/N
0.3047mm/N
0.2345mm/N
Fs
51Hz
63Hz
47Hz
40Hz
43Hz
29Hz
27.41Hz
Rms
1.8186
2.2635
1.9867
2.1166
3.6137
3.8673
4.4297
SPL
95.4
96.5
97.8
97.5
96.6
96.3
96.7
Vas
(liters)
124.36
59.8
113.99
293.11
154.47
575.10
442.53
Sd
532.36cm2
525.84 cm2
519.45 cm2
856.34cm2
856.34 cm2
1159.17 cm2
1159.17 cm2
(1-3)
$46.95
53.95
79.95
64.95
135.00
99.95
149.95
EBP
70.5
122.8
158.9
76.6
102.5
57.8
91.4
(4-up)
$43.52
49.96
74.11
60.26
125.15
96.82
145.00
C52_pg_141
8/8/07
12:49 PM
Page 141
Speaker
Components
Hyper Pro Series Woofers
section
Hyper Pro woofers are suitable in any automotive
subwoofer, two way or three way system. Features:
•Large 4ohm kapton four-layer voice coils •Reinforced
treated paper cones •Rigid powder coated stamped
steel baskets •Wide heavy foam surround •Bumped
and vented pole piece •Chrome push terminals
•Rubber gasket and magnet boot
Order #
55-2630
55-2631
55-2633
55-2635
Model #
PW886X
PW1086X
PW1286X
PW1586X
Size
8"
10"
12"
15"
Power Capacity
(RMS/max)
250W/500W
350W/700W
500W/1000W
600W/1200W
5
Voice Coil Dia.
11⁄2"
2"
2"
21⁄2"
SPL (W/M)
87.4dB
86.4dB
86.1dB
89.5dB
Magnet
65 oz.
90 oz.
90 oz.
110 oz.
(1-3)
$17.95
26.95
32.19
49.95
(4-up)
$17.25
26.26
31.42
48.92
Chrome Power Series 15" Woofer
Attractive gold finish basket and magnet plates
provide these woofers with an attractive appearance
that is unmatched in the industry. Features: •Injected
gold polypropylene cone •Wide, nonfatiguing rubber
surround •Gold plated steel basket •Gold plated spring
terminals •High temperature 4ohm kapton voice
coil •Dual stacked 60 oz. magnets •Vented and
bumped backplate
Order #
55-2641
Model #
PW1229
Size
12"
Power Capacity
(RMS/max)
Voice Coil Dia. SPL (W/M)
Fs
600W/1200W
21⁄2"
85.8dB
33.1Hz
Qms
4.8
Qes
2.46
Qts
0.9
(1-3)
$44.95
(4-up)
$44.03
Order #
55-2570
Model #
PW1577X
(1–3)
$47.20
(4–up)
$43.81
Chrome
Power Series
10" Woofer
Royal Red Series Aluminum Cone Woofers
Single piece concave aluminum cone provides added
punch, with extended power capacity. Features: •Wide,
non fatiguing rubber surround •Red plated steel basket
•Gold plated binding posts •2" high temperature 4ohm,
four-layer kapton voice coil •Dual stacked 60 oz.
magnets •Vented and bumped back plate
Order #
55-2645
55-2646
Model #
PWRD10A
PWRD12A
Size
10"
12"
Power Capacity (RMS/max)
500W/1000W
600W/1200W
SPL (W/M)
84.0dB
86.1dB
(1-3)
$41.95
49.95
(4-up)
$41.15
48.92
Order #
55-2568
Royal Blue Series Aluminum Cone Woofers
Single piece concave aluminum cone provides added
punch, with extended power capacity. Features:
•Wide, non fatiguing rubber surround •Blue plated
steel basket with chrome back plate •Gold plated binding
posts •2" high temperature 4ohm aluminum voice
coil •Vented and back plate
Order #
55-2650
55-2651
Model #
PW1087
PW1287
Size
10"
12"
Power Capacity (RMS/max)
400W/8000W
500W/1000W
Magnet Weight
80 oz.
100 oz.
SPL (W/M)
88dB
89dB
(1-3)
$31.95
39.95
(4-up)
$31.42
39.09
Red/Blue
Label
Automotive
Woofers
Poly cone
woofers are
available in red
or blue, to suit
individual automotive design taste. They are perfect in sealed or vented enclosures. Features:
•Electroplated polypropylene cone •Wide rubber surround •Red/blue plated steel basket (to match cone)
•2" high temperature 4ohm, kapton voice coil (10" models are 1.5") •Vented and bumped back plate
Order #
55-2690
55-2691
55-2695
55-2696
Model #
Color
PLW10RD Red
PLW12RD Red
PLW10BL Blue
PLW12BL Blue
Power Capacity
Size Magnet
(RMS/max)
10"
70 oz.
300W/600W
12"
90 oz.
400W/800W
10"
70 oz.
300W/600W
12"
90 oz.
400W/800W
Ideal for
demanding
autosound
applications where performance and
cost are a concern. The ultra-rigid molded PP cone
provides tight low frequency response below 40Hz.
Features: •Chrome finished basket •Specially
treated black rubber surround •Bumped and
vented yoke plate for increased excursion •Heavy
duty binding post terminals •Rubber magnet boot
for protection and improved appearance •High
temperature 2" kapton voice coil Specifications:
•Power capacity: 250W/500W RMS/peak •Frequency
response: 39Hz~4.0KHz •SPL: 88dB (W/M) •Magnet
weight: 80 oz. •Nominal impedance: 4ohm •Overall
frame diameter: 10.08" •Mounting depth: 4.33"
SPL
(W/M)
86.7dB
85.5dB
86.7dB
85.5dB
Fs
35.9Hz
26.2Hz
35.9Hz
26.2Hz
Qms
5.72
5.81
5.72
5.81
Qes
0.83
0.90
0.83
0.90
Qts
0.73
0.78
0.73
0.78
Vas
(1-3) (4-up)
1.932ft3 $16.95 $15.75
3
4.146ft
23.95 22.24
1.932ft3 16.95 15.75
3
4.146ft
23.95 22.24
Model #
PW1077X
(1–3)
$26.20
(4–up)
$24.34
Chrome
Power
Series
12"
Woofer
Ideal for
demanding autosound applications where
performance and cost are a concern. The ultra-rigid
molded PP cone provides tight low frequency
response below 40Hz. Features: •Chrome finished
basket •Specially treated black rubber surround
•Bumped and vented yoke plate for increased
excursion •Heavy duty binding post terminals
•Rubber magnet boot for protection and improved
appearance •High temperature 2" kapton voice
coil Specifications: •Power capacity: 350W/700W
RMS/peak •Frequency response: 36Hz~4.5KHz
•SPL: 88dB (W/M) •Magnet weight: 80 oz.
•Nominal impedance: 4ohm •Overall frame
diameter: 12.17" •Mounting depth: 4.96"
Order #
55-2569
Model #
PW1277X
(1–3)
$31.45
(4–up)
$29.19
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
141
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
5
Imperial Series Woofer
Ideal for demanding autosound applications where
performance and cost are a concern. The ultra-rigid
molded PP cone provides tight low frequency
response below 40Hz. Features: •Chrome finished
basket •Specially treated black rubber surround
•Bumped and vented yoke plate for increased
excursion •Heavy duty binding post terminals
•Rubber magnet boot for protection and improved
appearance •High temperature 2.5" kapton voice
coil Specifications: •Power capacity: 450W/800W
RMS/peak •Frequency response: 32Hz~4.0KHz
•SPL: 89dB (W/M) •Magnet weight: 100 oz.
•Nominal impedance: 4ohm •Overall frame
diameter: 15.16" •Mounting depth: 5.87"
C52_pg_142
8/8/07
1:00 PM
Page 142
Speaker
Components
section
5
5
Polypropylene
Cone Woofers
High power poly
cone woofers
feature specially
designed foam
surrounds, which
provide increased durability and resistance to harsh
automotive environments. Bumped yoke plate allows
increased cone excursion and large strontium
magnet, oversized aluminum voice coil and vented
pole piece allows increased power handling. All
models are 4ohm. Sold individually.
Order # Power
Mfr. #/ Capacity
Size
(RMS/Peak)
55-2370 100W/200W
WX65x/
6.5"
55-2371 100W/200W
WX85x/
8"
55-2372 125W/250W
WX102x/
10"
55-2373 150W/300W
WX120x/
12"
55-2374 200W/400W
WX15x/
15"
Frequency
Voice
Response Magnet Coil (1–3) (4–up)
65Hz~3.6KHz 40 oz. 1" $7.77 $7.17
45Hz~3.8KHz 50 oz. 1.5" 11.03 10.28
40Hz~4KHz
70 oz. 1.5" 14.94 13.88
38Hz~4.5KHz 80 oz. 1.5" 22.31 20.75
34Hz~4KHz
100 oz. 2" 39.38 36.50
Premium Series Professional Woofers
Designed for demanding stage applications, these professional woofers
are the ideal choice when building custom cabinets, or as replacements in
existing equipment. Oversized magnet structures, large voice coils and vented
pole pieces ensure performance and reliability in demanding situations. Features:
•Heavy treated paper cone •Treated accordion cloth edge suspension •“Bumped”
magnet to allow for increased excursion •High temperature aluminum 8ohm voice
coils. •Three year manufacturers warranty
Order #
55-2350
55-2351
55-2352
55-2353
55-2354
55-2355
Size
6"
8"
10"
12"
15"
18"
Power Capacity
(RMS/peak)
150W/400W
200W/500W
200W/600W
200W/700W
250W/800W
300W/1000W
Magnet
30 oz.
40 oz.
50 oz.
60 oz.
70 oz.
100 oz.
Fs
94.3Hz
60.7Hz
45Hz
35.5Hz
26.7Hz
24.2Hz
Ideal for
demanding
autosound applications where performance and
cost are a concern. The ultra-rigid molded PP cone
provides tight low frequency response below 40Hz.
Features: •Chrome finished basket •Specially
treated black rubber surround •Bumped and
vented yoke plate for increased excursion •Heavy
duty binding post terminals •Rubber magnet boot
for protection and improved appearance •High
temperature 11⁄2" kapton voice coil Specifications:
•Power capacity: 200W/400W RMS/peak •Frequency
response: 39Hz~3.8KHz •SPL: 86dB (W/M) •Magnet
weight: 60 oz. •Nominal impedance: 4ohm •Overall
frame diameter: 8.27" •Mounting depth: 3.54"
Order #
55-2567
Model #
PW877X
(1–3)
$17.33
(4–up)
$16.10
(4–up)
$11.07
•Replacement
speaker for MTX
Road Thunder speaker systems
#MTX55HB, MTX445B and
Pioneer #FD1ODP61-56F-Q
•Sealed back design •Magnet
weight: 10 oz. •8ohm
•Frequency response:
800Hz~10KHz •Power handling: RMS/peak 50/70W
(1-3)
$8.43
(4-up)
$7.92
NET 30
Terms
142
SPL
88.5dB
89.2dB
89.3dB
90.0dB
90.2dB
94dB
Vas
0.184
0.696
1.69
4.517
11.357
17.77
(1–3)
$13.95
17.95
24.95
34.95
44.95
109.00
(4–up)
$12.97
15.07
22.48
32.16
41.67
100.94
Ideal when compact
mid/low frequency
reproduction is desired, and
a separate larger subwoofer will
be utilized. Its specially designed molded PP
cone provides outstanding mid–frequency response.
Features: •Chrome finished basket •Specially
treated black rubber surround •Bumped and
vented yoke plate for increased excursion •Heavy
duty binding post terminals •Rubber magnet boot
for protection and improved appearance •High
temperature 1" kapton voice coil Specifications:
•Power capacity: 150W/300W RMS/peak
•Frequency response: 55Hz~3.6KHz •SPL: 86dB
(W/M) •Magnet weight: 40 oz. •Nominal impedance:
4ohm •Overall frame diameter: 6.5" •Mounting
depth: 2.89"
Order #
55-2566
Model #
PW677X
(1–3)
$10.49
(4–up)
$9.72
•1" soft cloth dome
•Ferrofluid cooled voice
coil: 1" •6.52 oz. barium
ferrite magnet •8ohm
•Frequency response:
3KHz~20KHz •Power handling: RMS/peak
50W/100W •Sensitivity 1W/1 meter: 92dB •31⁄2" x
31⁄2" mounting dimensions •Pioneer #FBDE75-52F
5.25" Sealed Back Midrange Pair
Carbon poly cone midranges feature a closed back
basket, eliminating the need to provide an isolated
enclosure within the speaker cabinet. Designed for
automotive use, these are ideal in home theater and
pro sound cabinets. •High temperature ferrofluid
cooled voice coil •Frequency response: 500Hz~6KHz
•Impedance: 4ohm •SPL: 91dB (W/M) •Includes
mounting hardware and crossover capacitor
•Mounting depth: 23⁄8" •Sold in pairs
Order #
54-620
Mfr. #
M57
(1–3 prs.)
$13.11
(4 prs. –up)
$12.16
5" Midrange with Grill
Order #
54-195
Qts
0.89
0.69
0.68
0.66
0.67
0.39
Dome Tweeter
This driver represents the
reintroduction of what is possibly
the most popular midrange
speaker of all time.
Its high efficiency,
high power capacity
and sealed back
design make this
Pyle Driver at home in countless
professional sound, home theater and autosound
applications. Specifications: •Cone material:
Treated paper •Voice coil: 1" aluminum •Magnet
weight: 15 oz. •Power capacity: 100W/200W
RMS/peak •Impedance: 8ohm •Sensitivity: 92dB
•Frequency response: 450Hz~7KHz •Overall
frame diameter: 53⁄16" •Required cutout: 4.25" dia.
•Mounting depth: 2" •Mfr. #PDMR5
(1–3)
$11.95
Qes
1.27
0.991
0.911
0.88
0.89
0.55
Chrome
Power Series
6.5" Midbass
Chrome
Power Series
8" Woofer
51⁄4" Sealed
Back Midrange
Order #
54-615
Qms
2.97
2.99
2.67
2.62
2.69
1.34
Order Online
www.mcmelectronics.com
Order #
53-180
•Designed for
demanding pro
audio use, this midrange is also perfect in home
theater applications •Flat die-cast aluminum
front panel •12.8 oz. ferrite magnet •Carbon fiber
diaphragm •Power capacity: 200W max (with
proper crossover >400Hz) •Frequency response:
400Hz~5.5KHz •Impedance: 8ohm •Sensitivity:
95dB 1W/1M
Order #
54-613
Model #
PDMR9
(1-3)
$19.95
(4-up)
$17.46
(4-up)
$12.43
Chrome
Bullet Tweeter Pair
Horn tweeter pair is
perfect for repair or
upgrade of existing
speaker systems, as well as
for new designs. •20 oz. magnet structure •Ferro
fluid cooled voice coil •Power capacity: 60W/120W
RMS/peak (with supplied crossover capacitor)
•Response: 2KHz~25KHz •Impedance: 4ohm
•SPL: 93dB (1W/1M) •3.75" outside diameter
•Sold in pairs
Order #
53-686
5" Dome
Midrange
(1-3)
$13.08
Model #
PDBT18
(1-3 prs.)
$17.99
(4 prs.-up)
$16.68
1" Mylar Dome Tweeter
•ABS frame includes mesh grill
for professional finished look
Specifications: •Frequency response:
2.7KHz~40KHz •Nominal impedance: 8ohm
•Sensitivity: 91dB (W/M) •Power capacity:
10W/30W RMS/peak (with proper crossover)
•Magnet: Neodymium •Faceplate diameter: 3.39"
•Required cutout: 1.97" •Mounting depth: 0.92"
Order #
53-835
(1-3)
$9.95
(4-up)
$8.19
C52_pg_143
8/8/07
1:01 PM
Page 143
Speaker
Components
Riffle Tweeter
Order #
53-830
(1-3)
$39.95
(4-up)
$32.91
1" Silk Dome
Neodymium Tweeter
Full size silk dome, in
a compact mounting
frame provides
outstanding
performance in a
very small space.
Neodymium magnet provides increased power
capacity, and specially designed frame allows
very wide dispersion. Specifications: •Power
capacity: 50W/100W RMS/max, with recommended
crossover •Frequency response: 1200Hz~20KHz
•Recommended crossover frequency: 2KHz,
12dB/octave •SPL: 94dB (W/M) •Nominal impedance:
8ohm •Voice coil diameter: 1" •Frame dimensions:
2.2" x 2.2" •Magnet diameter 1.4" •Required cutout
diameter: 1.8" •Mounting depth: 0.79"
Order #
LS01262
(1-3)
$29.95
(4-up)
$26.50
Ribbon Tweeter
Attain the clarity and
performance that only
a lightweight ribbon
design can provide.
The radiating area
of ribbon tweeters is
typically several times that
of conventional dome types,
while only a fraction of the
weight, providing excellent
frequency response and efficiency.
Additionally, the specially designed
flared dispersion lens provides very
wide horizontal dispersion. The
compact die cast faceplate makes
it ideal for bookshelf systems, or stack multiple units
as an array. Specifications: •Frequency response:
9KHz~120KHz •Nominal impedance: 8ohm
(transformer balanced) •Sensitivity: 90dB (W/M)
•Power capacity: 40W/80W RMS/peak (with proper
crossover) •Diaphragm material: Aluminum •Magnet:
Neodymium •Faceplate dimensions: 33⁄8" (H) x
315⁄16" (W) •Mounting depth: 21⁄2" •For complete
mounting information, see www.mcmelectronics.com.
Order #
53-825
(1-3)
$69.95
MONACOR
11⁄8" Soft
Dome Tweeter
Soft dome tweeter
provides exceptionally
smooth response to
20KHz. Ferrofluid cooling
aids in heat dissipation,
providing increased power
handling. Rectangular
steel front plate is 1⁄16" and
is powder coated black.
Specifications: •Power
capacity: 35W/60W RMS/peak •Frequency response:
1.5~20KHz •Recommended crossover frequency:
2.5KHz, 12dB/octave •Fs: 1.5KHz •SPL: 92dB (1W/M)
•Voice coil diameter: 1" •Impedance: 8ohm •Overall
frame dimensions: 31⁄8" (H) x 49⁄16" (W) •Required
cutout: 27⁄8" (H) x 33⁄4" (W) •Mounting depth: 1"
Order #
LS00058
Mfr. #
DT–100
(1–4)
$14.25
Mfr. #
DT–75/ 8
(1–4)
$12.25
(5–up)
$11.84
3" OEM
Cone Tweeter
•Popular replacement
for Sharp, Curtis
Mathes and many
more •Magnet weight:
2 oz. •Voice coil: 1⁄2"
•8ohm •Power
handling: 30W/60W RMS •Sensitivity SPL 1W/1
meter: 92dB •Frequency response: 1200~18KHz
Order #
53-420
(1-3)
$3.99
(5–up)
$13.90
Designed in France.
Soft dome tweeter
provides exceptionally
smooth response to
20KHz. Ferrofluid
cooling aids in heat
dissipation, providing
increased power handling.
Flared ABS front plate
provides improved off axis
response. Specifications:
•Power capacity: 25W/50W
RMS/peak •Frequency
response: 2~20KHz •Recommended crossover
frequency: 3KHz, 12dB/octave •Fs: 2KHz •SPL: 90dB
(1W/M) •Voice coil diameter: 1" •Impedance: 8ohm
•Overall frame dimensions: 211⁄16" (H) x 35⁄8" (W)
•Required cutout: 25⁄8" (H) x 23⁄4" (W), plus notch
for connections •Mounting depth: 1"
(4-up)
$3.49
•High performance
coated silk dome tweeter
Features: •Ferro cooled
voice coil •Sealed rear
chamber for lower
resonance •Very smooth
response •Metal faceplate •Braided tinsel leads for
higher accuracy •Magnet weight: 8.04 oz. •Voice coil:
28mm •8ohm •Power handling: 50W RMS/100 peak
•Sensitivity: 92dB •Free air resonance: FS-1000
•Frequency response: 1.2~20KHz •31⁄8" cut out hole
•43⁄8" diameter •33⁄8" mounting holes
(1-3)
$41.95
(4-up)
$35.79
⁄4" Polymer
Dome Tweeter
3
•Fluted edge reduces
unwanted distortion
•Designed with the serious
audiophile in mind •Ferrite
magnet weight: 2.4 oz. •Ferrofluid cooled Kapton
voice coil: 3⁄4" •8ohm •Power handling: RMS/peak
30W/60W •Sensitivity SPL 1W/1 meter: 90dB
•Frequency response: 2KHz~20KHz •Sealed
back •Mounting dimensions: 29⁄16" x 29⁄16"
•Pioneer #FBDD69-51F
Order #
53-360
Ribbon Tweeter
Attain the clarity and
performance of a lightweight
ribbon design, at a tremendous
price. The radiating area of
ribbon tweeters is typically
several times that of
conventional dome types,
while only a fraction of the
weight, providing excellent
frequency response and
efficiency. Additionally, the
specially designed flared dispersion lens provides
very wide horizontal dispersion. The unique small
size makes it ideal for compact bookshelf systems,
or stack multiple units as an array. Specifications:
•Frequency response: 3500Hz~20KHz •Nominal
impedance: 6ohm •Sensitivity: 90dB (W/M)
•Power capacity: 20W RMS (with proper crossover)
•Diaphragm material: Aluminum laminated
polyimide •Magnet: Neodymium •Dimensions:
3.41" (H) x 2.13" (W) x 0.46" (D)
(1-3)
$10.09
(4-up)
$9.35
(1-3)
$24.95
(4-up)
$23.18
Soft Dome Tweeter
This 1" controlled dispersion
soft dome provides very smooth
response through its frequency
range. High efficiency, great power
handling and a reduced diffraction front face make
this tweeter an excellent choice any time you need
a low cost, great sounding, high frequency speaker.
Shielded magnet structure allows close proximity to
video monitors. Specifications: •Magnet weight:
8 oz. •Voice coil: 1" •Nominal impedance: 8ohm
•Power handling: 20W/40W RMS/peak •Sensitivity:
92dB (W/M) •Frequency response: 2KHz~20KHz
•Overall frame diameter: 4" •Required cutout: 27⁄8"
(additional notch required for solder lugs) •Response
curve and dimensional drawings available
on www.mcmelectronics.com.
Order
53-526
D2801XL Tweeter
Order #
53-540
5
Order #
53-840
MONACOR
1" Soft Dome Tweeter
Order #
LS00061
(4-up)
$61.75
section
(1–3)
$10.79
(4–11)
$10.00
(12–up)
$8.89
Titanium
Dome Tweeter
The 1" controlled
dispersion
dome provides
emphasized high
frequency response
characteristic of
titanium tweeters.
Shielded magnet
structure allows close proximity to video monitors.
Specifications: •Magnet weight: 8 oz. •Voice
coil: 1" •Nominal impedance: 8ohm •Power
handling: 20W/40W RMS/peak •Sensitivity:
92dB (W/M) •Frequency response: 2KHz~20KHz
•Overall frame diameter: 4" •Required cutout:
27⁄8" (additional notch required for solder lugs)
•Response curve and dimensional drawings
available on www.mcmelectronics.com.
Order
53-572
(1-3)
$18.95
(4-11)
$17.46
(12-up)
$15.61
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
143
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
5
Very similar to the
ribbon tweeter in
design and performance,
this tweeter utilizes
a line source design
for uniform response,
tremendous clarity and
performance. The radiating area
of this tweeter remains several
times that of conventional dome
types, while only a fraction of the
weight, providing excellent frequency
response and efficiency. Additionally,
the specially designed flared dispersion
lens provides very wide horizontal
dispersion. The compact die cast
faceplate makes it ideal for compact two
or three-way bookshelf systems or studio
monitors. Specifications: •Frequency response:
6.2KHz~76KHz •Nominal impedance: 8ohm
•Sensitivity: 85dB (W/M) •Power capacity: 60W/130W
RMS/peak (with proper crossover) •Diaphragm
material: Kapton film •Magnet: Neodymium
•Faceplate diameter: 39⁄16" •Required cutout: 27⁄8" (H) x
1-3⁄4" (W) •Mounting depth: 2" •For complete mounting
information, see www.mcmelectronics.com.
C52_pg_144
8/8/07
1:01 PM
Page 144
Speaker
Components
section
5
5
Inverted Dome Tweeter
This 3⁄4" soft dome tweeter
features an inverted dome
which provides outstanding
clarity and dispersion
characteristics. Ferrofluid cooling,
a 4 oz. magnet and dual layer, 3⁄4" voice coil combine
to provide outstanding 35W/50W RMS/peak power
capacity and 2KHz~20KHz frequency response.
Specifications: •SPL: 94dB 1W/1M •Le: 0.84mH
•Impedance: 8ohm •Recommended crossover
frequency: >2KHz Dimensions: •Overall frame
diameter: 3.68" •Magnet diameter: 2.56" •Depth:
0.95" •Required cutout: 2.95" •Three mounting holes
are spaced evenly on 3.35" diameter centers
Order #
53-630
(1-3)
$15.95
(4-up)
$14.16
3" Cone Tweeter
•Popular OEM
replacement for
Sansui, Sanyo,
Fisher, Curtis
Mathes and many
others •Magnet
weight: 3.6 oz.
•Voice coil: 1" •8ohm
•Power handling:
RMS/peak 50W •Sensitivity SPL 1W/1 meter: 100dB
•Frequency response: 8Hz~10KHz
Order #
54-295
(1-3)
$6.09
(4-up)
$5.14
•4" x 10"
high-quality
mid/tweeter horn
made of die-cast
aluminum •Magnet
weight: 10 oz. •Voice
coil: 11⁄2" •8ohm •Power handling: RMS/peak
30W/60W •Sensitivity SPL 1W/1 meter: 103dB
•Frequency response: 1.5KHz~20KHz
Order #
54-245
54-250
•Durable high strength
plastic horn •Magnet
weight 10 oz. •Voice coil 1"
•8ohm •Power capacity
80W nominal •Frequency
response 4~19KHz •Suggested crossover
frequency 5KHz •Dimensions: •Outer flange
37⁄8" dia. •Magnet 27⁄8" dia. Mounting depth 23⁄8"
•Required cutout 21⁄2" •Replacement diaphragm
available (#53-376)
(1-3)
$11.22
(4-up)
$10.51
Description
Mid/Tweeter horn
Replacement diaphragm
(1-3)
$27.49
11.28
(4-up)
$26.21
-
Large
midrange
horn is ideal for most
commercial PA
applications. Features
include: 10 oz. ferrite
magnet, 1" high
temperature voice coil
and 50W nominal power capacity. Housing is made
of high impact black plastic. Specifications:
•Frequency response 500Hz~12KHz •SPL 105dB
•Recommended crossover frequency 900MHz •8ohm
Mounting specifications: •Opening size 6" x 131⁄4"
•Front mounting flange 71⁄4" x 143⁄8" •Mounting depth
83⁄4" minimum •Magnet diameter 31⁄4"
Order #
54-535
(1-3)
$23.18
(4-up)
$20.75
3 ⁄2" Super
Bullet Tweeter
1
•Durable high strength
plastic horn •Magnet
weight: 10 oz. •Voice coil:
1" •8ohm •Power
handling: RMS/peak 80W
•Sensitivity 1W/1 meter:
100dB •Frequency
response: 4KHz~19KHz •Suggested crossover
frequency: 5KHz •Mounting dimensions: 29⁄16" x 29⁄16"
•Replacement diaphragm available (#53-376)
Order #
53-375
(1-3)
$11.06
(4-up)
$10.35
31⁄2" Exponential Horn
This high output exponential
horn design works well in
a frequency range from
2K~20KHz. The fast acting
mylar dome insures accurate
sound reproduction. The
features also include: •2.9
oz. barium ferrite magnet •Net weight 10.9 oz.
•8ohm •Frequency response: 2KHz~20KHz
•RMS/peak: 35W/70W •Sensitivity 1W/1 meter:
100dB •Mounting dimensions: 23⁄4" x 23⁄4"
Order #
53-495
(1-3)
$10.09
(4-up)
$9.35
NET 30
Terms
144
Order Online
www.mcmelectronics.com
Horn Loaded Tweeter
3" x 3" horn tweeter
provides the durability
and performance needed in
today’s prosound situations.
Perfect as a replacement or
upgrade, this tweeter is also perfect as an
add–on in situations requiring more high frequency
emphasis. Specifications: •Power capacity: 120W
max •Magnet weight: 15 oz. •Sensitivity: 100dB
•Frequency response: 1KHz~15KHz •Voice coil
diameter: 1" •Impedance: 8ohm •Mfr. #PH25
Order #
53-650
•Popular Pioneer
tweeter used as
original equipment in
many Hi-Fi systems
•Magnet weight:
2 oz. •Ferrofluid
cooled voice coil: 1⁄2"
•8ohm •Power handling: RMS/peak 40W/80W
•Sensitivity SPL 1W/1 meter: 92dB •Frequency
response: 2KHz~15KHz •Sealed back •Mounting
dimensions: 21⁄2" x 21⁄2" •Pioneer #FC77AP45-21F-Q
Order #
53-355
(1-3)
$5.54
(4-up)
$4.67
21⁄2" Cone Tweeter
4" x 10"
Mid/Tweeter Horn
7" x 15" Midrange Horn
Super Bullet Tweeter
Order #
53-377
4" Square Midrange OEM Replacement
(1–3)
$5.24
(4–up)
$4.85
•Popular OEM
square Hi-Fi tweeter
•Magnet weight: 2 oz.
•Ferrofluid cooled voice
coil: 1⁄2" •8ohm •Power
handling: RMS/peak
40W/80W •Sensitivity
SPL 1W/1 meter: 93dB •Frequency response:
2KHz~20KHz •Sealed back •Mounting dimensions:
23⁄16" x 23⁄16" •Pioneer #FP66AP45-54F
Order #
53-370
(1-3)
$4.53
(4-up)
$4.15
21⁄2" OEM Cone Tweeter
•Popular replacement
for Sharp, Curtis
Mathes and many
others •Magnet weight:
2 oz. •Voice coil: 1⁄2"
•8ohm •Power
handling: RMS/ •peak
30W/60W •Sensitivity
SPL 1W/1 meter: 93dB
•Frequency response:
1200Hz~18KHz •Mounting dimensions: 23⁄16" x 23⁄16"
Order #
53-425
(1-3)
$3.39
(4-up)
$2.98
21⁄2" Cone Tweeter
•Popular OEM
round Hi-Fi tweeter
•Magnet weight: 2 oz.
•Ferrofluid cooled
voice coil: 1⁄2" •8ohm
•Power handling:
RMS/peak 40W/80W
•Sensitivity SPL 1W/1 meter: 93dB •Frequency
response: 2KHz~20KHz •Sealed back •Mounting
dimensions: 31⁄16" •Pioneer #FD66AP45-13F
Order #
53-365
(1-3)
$5.54
(4-up)
$4.67
Titanium
Super Tweeter
Die cast frame features a
machined front flange for surface
mounting. Features: •Titanium
diaphragm •Aluminum voice
coil •Frequency response:
2KHz~25KHz •Sensitivity: 110dB
(W/M) •Impedance: 8ohm •Power capacity:
200W/500W RMS/peak (with proper crossover)
Order #
53-775
Mfr. #
PDBT37
(1–3)
$37.95
(4–up)
$35.18
Rectangular
Horn Tweeter
2" Titanium
Super Tweeter
4" x 10" horn
tweeter is a direct
replacement for those commonly
found in many stage main and monitor speaker
systems. It is perfect in replacement or new design
applications. Specifications: •Power capacity:
200W max •Magnet weight: 20 oz. •Sensitivity:
102dB •Frequency response: 1KHz~15KHz •Voice
coil diameter: 1" •Impedance: 8ohm •Mfr. #PH391
•Die cast aluminum
frame •Diamond chrome
cutting finish •2" high
temperature voice coil
•20 oz. magnet structure •350W/700W RMS/peak
•8ohm •Sensitivity: 112dB W/M •Frequency
response: 2KHz~25KHz •Includes crossover
capacitor •Overall frame dimensions: 4" x 5"
•Depth: 3"
Order #
53-655
(1–3)
$15.95
(4–up)
$14.58
Order #
53-845
Mfr. #
PDBT78
(1–3)
$31.95
(4–up)
$29.36
C52_pg_145
8/15/07
12:22 PM
Page 145
Bullet Piezo Horn Driver
Piezo Horn Tweeter
Very commonly used tweeter
in musical instrument, sound
reinforcement and DJ speaker
systems, it is also popular for use
in carpeted automotive speaker
boxes. Piezoelectric design offers excellent transient
response, high efficiency and very high immunity
to burnout. Very high impedance at low frequencies
eliminates the need for a crossover, making
this a very inexpensive and reliable tweeter
to incorporate into any speaker system. It is
perfect for direct incorporation into multi tweeter
arrangements. Specifications: •Power capacity:
75W/150W RMS/max •Frequency response:
2KHz~20KHz •Mounting flange dimensions: •33⁄8" x
33⁄8" •Required opening: 31⁄8" diameter •Depth: 3"
Order #
53-800
(1–3)
$1.79
(4–24)
$1.65
(25–up)
$1.59
Ideal for use with any standard
midrange/tweeter horn lens.
Screw-on horn driver utilizes
standard 13⁄8" x 18TPI threads for
compatibility with most available
drivers. Commonly used in musical
instrument and DJ speaker systems, this
driver provides wide dispersion, ideal in sound
reinforcement applications. Piezoelectric design offers
excellent transient response, high efficiency and very
high immunity to burnout. Very high impedance at
low frequencies eliminates the need for a crossover,
making this a very inexpensive and reliable
tweeter to incorporate into any speaker system. It is
perfect for direct incorporation into multi tweeter
arrangements. Specifications: •Power capacity:
75W/150W RMS/max •Frequency response:
2KHz~20KHz •Diameter: 21⁄2"
(1-3)
$2.39
(4-24)
$2.26
Order #
53-815
(1-3)
$4.79
(4-24)
$4.52
(25-up)
$4.01
5
#53-665
#53-670
#53-675
(25-up)
$1.95
Dual Element Piezo Horn Tweeter
Ideal for replacement
or upgrade
in musical
instrument,
sound
reinforcement
and DJ speaker
systems. Dual
element configuration
offers higher SPL and
wider dispersion, from a
single horn assembly.
Piezo electric design
offers excellent transient response, high efficiency
and very high immunity to burnout. Very high
impedance at low frequencies eliminates the need
for a crossover, making this a very inexpensive and
reliable tweeter to incorporate into any speaker
system. Specifications: •Power capacity: 75W/150W
RMS/max •Frequency response: 3KHz~18KHz
•Mounting flange dimensions: •33⁄4" x 61⁄2"
•Required opening: 21⁄4" x 5" •Depth: 4"
section
5
Order #
53-810
Speaker
Components
Piezo Tweeter Pairs
3" x 7" Piezo
Horn Tweeter
Very commonly used
tweeter in musical
instrument, sound
reinforcement and
DJ speaker systems.
Rectangular horn lens
provides wide dispersion, ideal
in sound reinforcement applications.
Piezoelectric design offers excellent transient
response, high efficiency and very high immunity
to burnout. Very high impedance at low frequencies
eliminates the need for a crossover, making this a very
inexpensive and reliable tweeter to incorporate into
any speaker system. It is perfect for direct
incorporation into multi tweeter arrangements.
Specifications: •Power capacity: 75W/150W
RMS/max •Frequency response: 2500Hz~25KHz
•Mounting flange dimensions: 31⁄4" x 73⁄8"
•Required opening: 21⁄4" x 61⁄4" •Depth: 4"
Order #
53-805
(1–3)
$2.39
(4–24)
$2.26
These tweeters feature
a piezo element for
#53-680
unmatched durability and
reliability. Because there is no magnet structure
or voice coil, these tweeters are practically
burn–out–proof. Their nominal impedance rises as
program frequency decreases, thus eliminating the
need for a crossover. Very popular in stage speakers,
the smaller size units are also popular in carpeted
auto speaker enclosures. Specifications: •Power
capacity: 75W/150W RMS/peak •Sensitivity: 94dB
•Frequency response: 3.5KHz~20KHz •Impedence:
8ohm at 20KHz •Sold in pairs
Order # Mfr. #
53-665 PSN1176
53-670
53-675
PSN1167
PSN1016
53-680
PSN1165
Size
(1–3 prs.) (4 prs.–up)
3" x 7.5"
$7.34
$6.80
rectangular
3.55" square
3.66
3.40
2.5" x 5.7"
3.66
3.40
rectangular
4.35" square
7.34
6.80
(25–up)
$1.95
Heavy Die-Cast
Aluminum Horn Lens
This high-quality black finished horn lens was
designed to be used with many high end horn
drivers like JBL’s world reknowned 2445. Dispersion
angles: 90° (H) x 40° (V) •Dimensions: 179⁄32" (W) x
1015⁄16" (H) x 93⁄8" (D)
Die Cast
Compression Horn Lens
ABS Compression Horn Lens
Constructed from reinforced molded ABS resin, this
horn lens is ideal for all high frequency compression
drivers. Its bolt on mounting flange is compatible with
most two and four bolt drivers. Features: •1" throat
diameter •Dispersion pattern: 90° (H) x 40° (V) •LF
cutoff: 500Hz •Overall dimensions: 6.13" (H) x
13.5" (W) x 6.88" (D)
Order #
53-860
Mfr. #
PH2340
(1–3)
$24.95
(4–up)
$23.43
Die cast aluminum horn is ideal for all high frequency
compression drivers. Its bolt on mounting flange is
compatible with most two and four bolt drivers.
Features: •1.57" throat diameter •Dispersion
pattern: 90° (H) x 40° (V) •LF cutoff: 400Hz •Bolt hole
pattern: 4" diameter •Overall dimensions: 9.31" (H) x
16.56" (W) x 10.75" (D) •Limited quantities
Order #
53-865
Mfr. #
PH2380
Order #
54-325
(1-3)
$77.95
#54-150
(ea.)
$75.95
Threaded
Horn Lens
#54-200
Perfect for use
with virtually any
horn driver that
utilizes standard
13⁄8" x 18 thread mount.
Compact design provides good 90° x 90° dispersion
and is ideal for stage/studio monitors. Brass
threaded insert and ABS resin construction
ensure secure mounting, even with large drivers.
•Dimensions: 61⁄2" (dia.) x 23⁄16" (D) •Black color
Order #
54-580
(4-up)
$66.90
(1-3)
$10.50
(4-up)
$9.57
Diffraction Horn
•Standard throat size: 13⁄8" x 18 threads per inch
•To be used with compression horn driver
Order # Type
54-200 Plastic
54-150 Fiberglass
Dimensions
(W) x (H) x (D)
15" x 41⁄2" x 81⁄2"
17" x 6" x 91⁄2"
(ea.)
$19.14
34.95
(2-up)
$18.67
32.50
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
145
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C52_pg_146
8/8/07
12:52 PM
Page 146
Speaker
Components
5
5
Compression
Mid/High
Frequency Driver
Threaded compression
driver is compatible
with horns having standard 13⁄8" x 18TPI threads.
Features: •Titanium diaphragm •2.84" flat
aluminum voice coil •50 oz. magnet structure
•Frequency response: 500Hz~18KHz •Sensitivity:
107dB (W/M) •Impedance: 8ohm •Power capacity:
300W/600W RMS/peak (with proper crossover)
Mfr. #
PDS772
(ea.)
$47.95
Compression
Mid/High
Frequency Driver
Threaded compression
driver is compatible with horns having standard 13⁄8" x
18TPI threads. Features: •Titanium diaphragm •2"
flat aluminum voice coil •30 oz. magnet structure
•Frequency response: 500Hz~18KHz •Sensitivity:
107dB (W/M) •Impedance: 8ohm •Power capacity:
300W/600W RMS/peak (with proper crossover)
Order #
53-745
Mfr. #
PDS521
(1–3)
$47.95
(4–up)
$44.45
Compression High
Frequency Driver
Threaded compression
driver is compatible
with horns having
standard 13⁄8" x 18TPI threads. Features: •Titanium
diaphragm •1.75" flat aluminum voice coil •30 oz.
magnet structure •Frequency response: 1KHz~20KHz
•Sensitivity: 105dB (W/M) •Impedance: 8ohm
•Power capacity: 250W/500W RMS/peak (with
proper crossover)
Order #
53-750
Mfr. #
PDS442
(1–3)
$29.95
(4–up)
$27.77
Original
Replacement Driver
•Lightweight
diffraction
horn made of
high-quality
plastic. •Standard 13⁄8" x 18
threads per inch •Dimensions:
105⁄8" (W) x 37⁄8" (H) x 71⁄4" (D)
(1-2)
$6.48
Mfr. #
TW-47
(1-3)
$28.95
(4-up)
$27.04
Mfr. #
PDB28
(1–3)
$12.95
(4–up)
$12.10
Compression
Mid/High
Frequency
Driver
(3-up)
$5.82
Order Online
www.mcmelectronics.com
Mfr. #
TW-57
(1-3)
$57.95
(4-up)
$53.82
Heavy-duty titanium
tweeter features a die cast
aluminum frame, 1.5" high
temperature voice coil with
ferrofluid cooling and 60 oz.
magnet structure. It is suitable for
most professional sound reinforcement applications
and high power home audio use. Includes 2.2µF, 250V
mylar crossover capacitor. Specifications: •Power
capacity 100W/200W RMS/peak •Frequency response:
2KHz~25KHz •Impedance: 8ohm •DC resistance
6.6ohm •SPL: 105dB Mounting specifications:
•Opening size: 3.62" diameter •Mounting depth: 2.51"
•Frame dimensions: 4.0" x 4.0" •Square mounting
hole pattern on 4.20" diameter centers
Order #
53-575
Mfr. #
TW-46
(1-3)
$26.95
(4-up)
$24.98
Compression High
Frequency Driver
Compatible with
two and three bolt patterns with M6 threaded holes.
Features: •Titanium diaphragm •2" flat aluminum
voice coil •30 oz. magnet structure •Frequency
response: 500Hz~18KHz •Sensitivity: 107dB (W/M)
•Impedance: 8ohm •Power capacity: 250W/500W
RMS/peak (with proper crossover) •Three mounting
holes, space at 120° on 2.24" diameter mount pattern
•Two mounting holes, spaced at 180° on a 3" diameter
mount pattern
Order #
53-735
Order #
53-585
11⁄2" Titanium
Super Bullet Tweeter
Heavy-duty titanium
tweeter features a die
cast aluminum frame,
1" high temperature
voice coil with ferrofluid
cooling, and a 30 oz.
magnet structure. It is suitable for professional
sound reinforcement applications and high power
home or autosound use. Includes crossover capacitor.
Specifications: •Power capacity: 75W/150W
RMS/peak •Frequency response: 2KHz~25KHz
•Sensitivity: •104dB •Outer frame dimensions:
3.25" x 3.25" •Sold individually
Order #
53-710
Extra heavy-duty titanium
tweeter features a die cast
aluminum frame, 3" high
temperature voice coil with
ferrofluid cooling and 100 oz.
magnet structure. Includes 3.3µF, 250V mylar
crossover capacitor. Specifications: •Power
capacity 200W/400W RMS/peak •Frequency response:
2KHz~25KHz •Impedance: 8ohm •DC resistance
6.6ohm •SPL: 109dB •Mounting specifications:
•Opening size: 5.0" diameter •Mounting depth: 4.46"
•Mounting flange recess: 1.375" •Frame dimensions:
6.0" x 6.0" •Square mounting hole pattern on 6.3"
diameter centers
LIMITED
2 YEAR
WARRANTY
1" Titanium
Bullet Tweeter
Order #
53-755
NET 30
Terms
146
Order #
53-580
Mfr. #
PDB512
(1–3)
$28.95
(4–up)
$26.84
Threaded compression
driver is compatible
with horns having
standard 13⁄8" x 18TPI threads. Features: •Titanium
diaphragm •1.35" flat aluminum voice coil •20 oz.
magnet structure •Frequency response: 1KHz~20KHz
•Sensitivity: 104dB (W/M) •Impedance: 8ohm
•Power capacity: 200W/400W RMS/peak
(with proper crossover)
(ea.)
$67.04
Diffraction Horn
Order #
54-290
Heavy-duty titanium
tweeter features a die cast
aluminum frame, 2" high
temperature voice coil with
ferrofluid cooling and 60 oz.
magnet structure. Includes 3.3µF, 250V mylar
crossover capacitor. Specifications: •Power
capacity 125W/250W RMS/peak •Frequency response:
2KHz~25KHz •Impedance: 8ohm •DC resistance
6.6ohm •SPL: 106dB Mounting specifications:
•Opening size: 3.15" diameter •Mounting depth: 2.0"
•Mounting flange recess: 1.0" •Frame dimensions:
4.25" x 4.25" •Square mounting hole pattern on
4.5" diameter centers
Compression High
Frequency Driver
•Popular replacement
driver •Panasonic
#EAS35HD06SA •16ohm
Order #
P-EAS35HD06SA
3" Titanium Super
Bullet Tweeter
2" Titanium Super
Bullet Tweeter
section
Order #
53-740
LIMITED
2 YEAR
WARRANTY
LIMITED
2 YEAR
WARRANTY
Mfr. #
PDS342
(1–3)
$21.95
(4–up)
$20.35
Threaded compression
driver is compatible
with horns having
standard 13⁄8" x 18TPI threads. Features:
•Titanium diaphragm •2" flat aluminum voice coil
•60 oz. magnet structure •Frequency response:
1500Hz~18KHz •Sensitivity: 102dB (W/M)
•Impedance: 8ohm •Power capacity: 300W/600W
RMS/peak (with proper crossover)
Order #
53-765
Mfr. #
PDS541
(1–3)
$36.95
(4–up)
$34.26
Compression
Mid/High
Frequency
Driver
Compatible with
two and four bolt patterns with M6 threaded holes.
Features: •Titanium diaphragm •3" flat aluminum
voice coil •50 oz. magnet structure •Frequency
response: 500Hz~20KHz •Sensitivity: 107dB (W/M)
•Impedance: 8ohm •Power capacity: 250W/500W
RMS/peak (with proper crossover) •Four mounting
holes, space at 90° on 4" diameter mount pattern
Order #
53-730
Mfr. #
PDB752
(1–3)
$56.95
(4–up)
$52.80
Compression High Frequency Driver
Threaded compression driver is compatible with horns
having standard 13⁄8" x 18TPI threads. Features: •Titanium diaphragm
•1.35" flat aluminum voice coil •12 oz. magnet structure •Frequency response:
1KHz~20KHz •Sensitivity: 102dB (W/M) •Impedance: 8ohm •Power capacity:
200W/400W RMS/peak (with proper crossover)
Order #
53-760
Mfr. #
PDS341
(1–3)
$18.95
(4–up)
$17.57
C52_pg_147
8/8/07
12:58 PM
Page 147
Mini Speakers
Speaker
Components
Mini replacement speakers with a big sound.
MCM can now supply you with round or square
mini speakers for your radio, TV or small cassette
units. These speakers are available in either
Alnico or Ferrite type magnets.
Order #
Round (8ohm)
52-125
52-130
52-140
52-150
Square (8ohm)
52-155
52-165
section
Size
Magnet
Type
Maximum
Power
Frequency
Response
(1-9)
(10-49)
(50-up)
2"
21⁄4"
3"
4"
Ferrite
Ferrite
Ferrite
Ferrite
0.2W
0.25W
0.5W
2.0W
430Hz~6KHz
400Hz~6KHz
240Hz~7KHz
140Hz~10KHz
$2.04
1.61
1.95
2.42
$1.98
1.53
1.83
2.27
$1.85
1.36
1.60
2.04
2"
31⁄2"
Alnico
Alnico
0.2W
1.0W
450Hz~4KHz
170Hz~8KHz
1.90
2.55
1.83
2.33
1.59
2.22
15 Watt L–Pads
2
3
31⁄2" Mini Speaker
1
Order #
50-090
50-275
Type
Mono
Stereo
(1-9)
$5.29
8.59
(10-24)
$4.59
7.09
3
2
1
100 Watt L-Pads
Order #
52-185
•Heavy–duty
L–pads •8ohm
•Hardware
supplied •3⁄8" shaft
Order #
50-070
50-285
(1-9)
$3.99
(10-up)
$3.19
A range of three weatherproof speakers available in
50mm, 66mm and 85mm sizes. The cones are made
from water resistant transparent Mylar® film.
Suitable for portable or exterior equipment where
moisture may be encountered, i.e. alarm panels,
sounders and door entry systems. •Size: 50mm,
66mm, 85mm •Depth: 18mm, 20mm, 33mm
•Power max: 2W, 3W, 12W •Power rated: 1W,
1.5W, 6W •Impedance: 8ohm, 8ohm, 8ohm
•Frequency response: 350Hz~7KHz,
350Hz~4.5KHz, 450Hz~4KHz
Order #
SR00186
SR00187
SR00188
Size
50mm
66mm
85mm
(1-9)
$1.99
2.29
2.59
(10-49)
$1.79
2.05
2.35
(50-up)
$1.59
1.85
2.19
3" Full Range Speakers
Type
Mono
Stereo
(1-9)
$11.29
18.95
2
3
(10-24)
$9.63
16.19
1
50 Watt
L-Pads
•Heavy–duty
L–pads •8ohm
•Hardware
supplied •3⁄8" shaft
Order #
50-475
50-080
50-280
Popular mini speaker
with improved power
handling for durability.
Excellent replacement
for many applications
including TV, small
radios, etc. •Magnet weight: 1.7 oz. •Voice coil: 3⁄4"
•8ohm •Power handling: RMS/peak 2W/3W
•Sensitivity: 89dB •Free air resonance: 150Hz
•Qts: 1.26 •Vas .15 cu. ft. Frequency response:
150~10KHz •Cutout hole: 35⁄16" •Hole to hole: 41⁄16"
Mylar® Cone Speakers
Type
Mono (16ohm)
Mono
Stereo
(1-9)
$8.69
11.69
16.89
(10-24)
$7.39
9.60
15.22
4" Portable Radio
Mini Speaker
Popular replacement
for portable radios and
boom boxes. Special
recessed flange for
exact fit. Silver dust
cap. •Magnet weight:
2.9 oz. •Voice coil: 3⁄4" •4ohm •Power handling:
RMS/peak 2.5W/5W •Sensitivity 89dB •Free air
resonance: 150Hz •Qts: 1.12 •Vas: .10 cu. ft.
•Cutout hole: 323⁄32" •Hole to hole (dia): 45⁄8"
Order #
52-180
(1-9)
$4.29
(10-up)
$3.70
Perfect for replacement use
or in new compact speaker
designs, these are also great
for multi–driver columns. Wide
frequency response and good
power handling make them
suitable in full range or midrange applications.
Features: •Open back stamped frame •Paper cone
with foam surround and molded dust cap •3⁄4" copper
voice coil on an aluminum former Specifications:
•Power capacity: 20W/40W RMS/peak •Frequency
range: 120Hz~16KHz •SPL: 88dB (1W/1M) •Magnet
weight: 5.4 oz. •Qts: 0.55 •Qes: 0.68 •Qms: 2.82
•Vas: 1.51 •Mms: 1.6g •Xmax: 1.5mm •Sd: 31cm2
Dimensions: •Outer frame: 3.1" x 3.1" •Required
cutout: 2.8" (dia.) •Depth: 1.7"
Order # Impedance Re
LS00118 4ohm
3.3ohm
LS00119 8ohm
6.5ohm
Le
(1–4) (5–up)
0.10mH $7.95 $7.20
0.15mH 7.95 7.20
3" OEM Magnetically Shielded Speaker
Single L–Pad Housings
•L–pad housing for most
L–pads •3" (O.D.)
Order #
50-100
50-110
Range
High
Mid
(1-9)
$0.99
0.91
(10-24)
$0.89
0.83
(25-up)
$0.79
0.73
L–Pad Recessed
Square Housings
•Black plastic housing for
tweeter and midrange L–pads
•Flush mount •Knobs included
•Dimensions: 25⁄8" (W) x 25⁄8" (H) x
11⁄4" (D) •Available in high range
Order #
50-1090
(1-9)
$0.99
(10-24)
$0.92
•Popular replacement used by
OEMs in the center channel
speaker cabinet •Commonly wired
in parallel for wide sound and
shielding prevents interference to
your TV picture •Replaces Sony
#1-504-782-11 and is used in
SS-CR150 surround systems and others
•Specifications: Dimensions 3" •Impedance 12ohm
•Power handling: RMS/peak 10W/25W •Free air
resonance: 120Hz •Sensitivity 84dB/W/M
•Frequency response: 120~18000Hz •Voice coil 3⁄4"
•Magnet dimensions: 60mm x 10mm (D x H)
•Magnet weight 3.5 oz. •Qts: 1.141 •Vas 1.21
Order #
52-195
(1-9)
$6.39
(10-up)
$5.79
(25-up)
$0.81
Mounting
Hardware
•For use with round speaker grills •Supports most
types of grills •Made of high-impact plastic •Can be
used with speaker grills #50-510 thru 50-545 •Black
•Four per package
Order #
50-1235
(1-9 pkgs.)
$2.05
(10-24 pkgs.)
$1.58
(25 pkgs.-up)
$1.26
Grill Fasteners
Narrow peg and
socket type, simply
drill hole and
pressure fit into grill
piece and cabinet. Four sets per package.
Order #
50-5475
(1-9 pkgs.)
$0.89
(10 pkgs.-up)
$0.69
Curtis Mathes Type 4" Replacement Midrange
•Replaces
Curtis Mathes
#31107-503-0056 •Used
in SPK100 and SPK101
systems •Also replaces
Fisher, Sharp and other
popular name brand
square midranges
•Black frame and cone •Chrome dust cap •Magnet
weight: 5 oz. •Voice coil: 3⁄4" •8ohm •Power handling:
RMS/15W •Sensitivity SPL 1W/1 meter: 90dB
•Replaces Sharp model #CP6900 and CP6990
•Mounting dimensions: 33⁄8" x 33⁄8"
Order #
54-235
(1-3)
$3.79
(4-up)
$3.49
Grill Fasteners
41⁄2" Full Range Driver
•Rigid paper cone •Treated
cloth surround •Stamped
steel frame •9.2 oz. magnet plus
cancellation magnet •1" voice
coil Specifications: •Power
capacity: 20W/40W RMS/peak •Frequency response:
95Hz~15KHz •Fs: 96Hz •Impedance: 8ohm •SPL:
89dB (1W/1M) •Re: 7.04ohm•Qes: 0.75 •Qms: 1.74
•Qts: 0.52 •Vas (liters): 4.76 •Xmax: 1.1mm •Sd:
66.48cm2 Dimensions: •Outer frame (pincushion):
4.49" x 4.49" •Required cutout: 4.06" •Depth: 2.19"
Order #
55-2615
(1-3)
$13.95
(4-up)
$11.07
•Ball and socket
type fastener •These
fasteners make removal
of grill from speaker
cabinet quick and easy •Four per bag
Order #
50-435
(1-9 bags)
$1.19
(10-24 bags)
$1.02
(25 bags-up)
$0.92
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
147
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
5
•Medium–duty
L–pads •Most
common size
•8ohm •Hardware
supplied •3⁄8" shaft
5
C52_pg_148
8/8/07
12:59 PM
Page 148
Speaker
Components
section
5
5
300 Watt Subwoofer
Amplifier Module
Perfect for any high
powered home theater
application, this
amplifier offers power
and features for an
incredibly low price.
Features: •Speaker
level and line level
inputs and outputs
•Fully adjustable
12dB/octave crossover
from 50Hz~120Hz
BACK
•Continuously adjustable
phase adjustment from 0°~180°
•Ultra heavy-duty toroidal
power transformer •Overload and
thermal and fuse protection with
output relay •High density trim
gasket •Gold plated RCA line/out
connections •Heavy-duty gold
plated binding posts •Removable
IEC type power cord •Discrete
TO-3P output devices (two pairs
of complimentary 2SC5200/2SA1943) Specifications:
•Absolute minimum speaker impedance: 4ohm
•Power output (RMS): 300W @ 4ohm, 200W @ 8ohm
•THD: Less than 0.05% •S/N ratio: Greater than
85dB •Power requirements: 120VAC, 60/50Hz
•Overall dimensions 111⁄4" (H) x 97⁄8" (W) x 51⁄2" (D)
•Required opening: 103⁄8" (H) x 9" (W) •Mounting
depth: 4"
Order #
50-6262
(1–3)
$139.00
(4–up)
$125.00
55 Watt
Bi–Amplified Module
Full range amplifier module
provides solid, clean 40W RMS
low frequency output plus 15W
RMS high frequency output.
It is ideally suited for
incorporation into a wide
variety of applications including
compact studio monitors or
self powered two–way speaker
systems for computer, home
BACK
theater or portable MP3 player
use. Features: •Independent
low and high frequency amplifier
sections •Independent low and
high frequency level adjustment
with master level control
•Switchable 4dB bass boost
•24dB/octave active crossover at
3KHz •Gold plated RCA female
line level input •Overload, thermal
and fuse protection •Removable
power cord •Each amplifier section
utilizes independent LM3886TF output device
Specifications high frequency section: •Power
output (RMS): 15W @ 8ohm •THD: Less than 0.05%
•S/N ratio: Greater than 80dB •Frequency range:
3KHz~20KHz •Minimum speaker impedance:
8ohm Low frequency section: •Power output
(RMS): 40W @ 8ohm •THD: Less than 0.05%
•S/N ratio: Greater than 80dB •Frequency range:
15Hz~3KHz •Minimum speaker impedance: 8ohm
General: Power requirements: 120VAC, 60Hz
•Overall dimensions 85⁄8" (H) x 53⁄8" (W) x 41⁄2" (D)
•Required opening: 73⁄4" (H) x 45⁄8" (W)
•Mounting depth: 31⁄4"
Order #
50-6277
(1–3)
$84.95
(4–up)
$69.95
NET 30
Terms
148
Order Online
www.mcmelectronics.com
200 Watt Subwoofer
Amplifier Module
Perfect for any
moderate to high
powered home theater
application, this
amplifier offers an
unbelievable 200W
RMS for under $100.
Features: •Speaker
level and line level
inputs and outputs
•Fully adjustable
12dB/octave crossover
BACK
from 50Hz~120Hz
•Continuously adjustable
phase adjustment from
0°~180° •Large power
transformer •Overload and
thermal and fuse protection
with output relay •High
density trim gasket
•Gold plated RCA line/out
connections •Heavy-duty
gold plated binding posts
•Removable IEC type power
cord •Discrete TO-3P output
devices (two pairs of complimentary
2SC5200/2SA1943) Specifications: •Absolute
minimum speaker impedance: 4ohm •Power output
(RMS): 200W @ 4ohm, 150W @ 8ohm •THD: Less
than 0.05% •S/N ratio: Greater than 82dB •Power
requirements: 120VAC, 60/50Hz •Overall dimensions
101⁄2" (H) x 811⁄16" (W) x 51⁄2" (D) •Required opening:
91⁄4" (H) x 71⁄2" (W) •Mounting depth: 4"
Order #
50-6263
(1–3)
$115.00
(4–up)
$102.00
Perfect in situations
where moderate power
output is desired. Its
compact size lends
itself to use in small
subwoofer enclosures.
The fully enclosed
ABS rear cover makes
this ideal in DIY
applications as well.
Features: •Speaker
level inputs, line level
BACK
inputs and outputs •Fully
adjustable 12dB/octave
crossover from 50Hz~120Hz
•Continuously adjustable phase
adjustment from 0°~180°
•Overload and thermal and
fuse protection with output
relay •High density trim gasket
•Gold plated RCA line/out
connections •Heavy-duty gold
plated binding posts •Removable IEC type power
cord •Discrete TO-3P output devices (complimentary
2SC5197/2SA1940) Specifications: •Absolute
minimum speaker impedance: 4ohm •Power output
(RMS): 100W @ 4ohm, 68W @ 8ohm •THD: Less
than 0.03% •S/N ratio: Greater than 80dB •Power
requirements: 120VAC, 60/50Hz •Overall dimensions
83⁄4" (H) x 77⁄8" (W) x 41⁄2" (D) •Required opening:
71⁄2" (H) x 63⁄4" (W) •Mounting depth: 31⁄2"
(1–3)
$69.95
(4–up)
$59.95
Order #
555-2505
(ea.)
$134.00
(2–9)
$127.52
(10-up)
$112.52
Charcoal colored
foam material is
designed for use as
speaker covers and is perfect for repair or new cabinet
design. Open cell design is acoustically transparent
and has virtually no effect on response or dispersion
characteristics. Available in three different sizes, all
models are sold in packages of two.
Dimensions
24" x 19" x 0.39"
26" x 23" x 0.39"
31" x 17" x 0.39"
Made of white
polyester fiber,
this is perfect for
internal speaker
enclosure
dampening, this
wadding provides the perfect solution to eliminating
problematic low frequency internal resonance.
This material is a must for any speaker building
or upgrade project. Package contains two sheets,
approximate dimensions: 25" (H) x 13" (W) x 13⁄8" (D).
Order #
LS00385
(1–3 pgs.)
$3.11
(4 pkgs.–up)
$2.63
Acoustic
Dampening Pad
Perfect for internal
speaker enclosure
dampening, this
wadding provides
the perfect solution
to eliminating problematic low frequency internal
resonance. Made from 2⁄3 sheeps wool and 1⁄3 polyester
fiber, this material is a must for any speaker
building or upgrade project. Package contains
two sheets, approximate dimensions:
25" (H) x 13" (W) x 13⁄8" (D).
Order #
LS00916
(1–3 pkgs.)
$2.95
(4 pkgs.–up)
$2.58
Sound Absorption Pads
Foam Speaker
Grill Material
Order #
LS00903
LS00904
LS00905
Ideal in any
application
requiring an
amplified
speaker. Allows
any PA speaker
to be easily
converted to a
powered monitor,
or complete
portable PA system. Open frame module is designed
to be mounted into the rear of an existing speaker
enclosure, and provide an astounding 250W output
(4ohm). Built in three channel mixer features two
balanced mic inputs, plus a single line input, each
with independent level controls. Balanced line level
output is provided, for easy daisy chaining of
multiple units. Independent LED indicators are
provided for power (green), and clip (red) indication.
Other controls include master volume, bass and
treble. Specifications: •Power output: 250W RMS
(4ohm), 150W RMS (8ohm) •THD (1KHz): <0.1%
•Frequency response (line input): 20Hz~18KHz
•Mic input level: 5.0mV •Line input level: 500mV
•Line output level: 500mV •Input connections:
Balanced XLR female •Output connections:
Balanced XLR male •Absolute minimum speaker
impedance: 4ohm •Power requirements: 115VAC,
460W •Dimensions: 101⁄2" (H) x 101⁄2" (W) x 43⁄4" (D)
•Required cutout: 91⁄2" (H) x 91⁄4" (W) •Call for larger
quantity pricing
Acoustic
Wadding Material
100 Watt Subwoofer
Amplifier Module
Order #
50-6272
250 Watt PA
Mixer/Amplifier
Module
(1–3 pkgs.)
$12.95
24.95
22.95
(4 pkgs.–up)
$11.50
21.59
19.99
Molded foam pads are ideal for
sound dampening applications in
small home studios, radio stations,
home theaters and acoustic test
facilities. Overall dimensions:
1000mm (39.37") x 500mm
(19.69"), available in 40mm or
60mm thickness. Sold in pairs,
molded face–to–face, and
packaged in flat sheets.
Order #
LS00626
LS00627
Overall Thickness Sculpted
(per sheet)
Depth (1–3 prs.) (4 prs.–up)
1.57" (40mm)
1"
$15.19
$13.40
2.36" (60mm)
2"
22.70
19.95
C52_pg_149
8/8/07
12:51 PM
Page 149
Speaker
Components
section
Air Core
Bobbin Inductors
Ideal for crossover design, speaker upgrade or repair,
these air-core inductors offer good power capacity and
performance, in a compact size, at a very reasonable
price. Features: •Air core design, preferred in
hi-fidelity applications as there is no potential
saturation distortion •ABS bobbin, greatly eases
mounting •18AWG solid copper wire, provides
300W power capacity and reasonably low ESR
Note: windings may be easily removed to obtain
exact desired inductance value •Sold individually
Value
0.05mH
0.10mH
0.13mH
0.15mH
0.20mH
0.22mH
0.27mH
0.40mH
0.50mH
0.60mH
0.80mH
0.90mH
1.00mH
1.10mH
1.30mH
1.50mH
2.50mH
3.00mH
3.50mH
4.00mH
4.50mH
5.00mH
6.00mH
(1-9)
$2.19
2.19
2.49
2.49
2.59
2.69
2.79
3.09
3.39
3.59
3.99
4.29
4.49
0.99
4.79
5.29
6.49
6.99
1.69
7.99
8.39
8.99
9.79
(10-up)
$2.05
2.05
2.32
2.32
2.42
2.52
2.58
2.87
3.18
3.70
4.01
4.21
4.48
4.93
6.07
6.48
7.41
7.82
8.33
9.05
Bennic
Audio Grade
Capacitors
Metalized polypropylene film capacitors are ideal
for crossover design, speaker upgrade or repair.
They are also useful in active audio filter and
coupling circuits. Utilized by speaker manufacturers
worldwide, Bennic XPP Series capacitors are known
for their outstanding performance/price ratio.
Features: •Voltage rating: 250WVDC (160VAC)
•Tolerance: 5% •Dissipation factor: <0.07% at 1KHz
•Operating temperature range: -40°C~+85°C
•Life test: 150% of rated working voltage at
105°C for 1,000 hours •Sold individually
Item #
50-4530
50-4533
50-4536
50-4539
50-4542
50-4545
50-4548
50-4551
50-4554
50-4557
50-4560
50-4563
50-4566
50-4569
50-4575
50-4578
50-4581
50-4584
50-4587
50-4590
50-4593
Dimensions (mm)
Value Diameter Length (1-9) (10-99) (100-up)
0.1 µF
6
14 $0.45 $0.41 $0.37
0.15 µF
6.5
14
0.45 0.41
0.37
0.22 µF
7
19
0.45 0.41
0.37
0.33 µF
8
19
0.45 0.41
0.37
0.47 µF
8.5
25
0.49 0.45
0.40
0.68 µF
10
25
0.59 0.55
0.48
0.82 µF
10
32
0.59 0.55
0.48
1.0 µF
10
32
0.69 0.63
0.55
1.5 µF
12
32
0.75 0.70
0.62
1.8 µF
13
32
0.95 0.89
0.78
2.2 µF
14
32
1.05 0.98
0.87
2.7 µF
16
32
1.19 1.10
0.98
3.3 µF
17.5
32
1.69 1.58
1.39
3.9 µF
18
32
1.69 1.57
1.39
5.6 µF
21
36
2.29 2.09
1.89
6.8 µF
19
46
2.19 2.03
1.80
7.5 µF
20.5
46
2.39 2.21
1.97
8.2 µF
21.5
46
2.69 2.49
2.21
10.0 µF
24
46
3.09 2.86
2.54
12.0 µF
23
46
3.49 3.23
2.87
15.0 µF
25
46
4.09 3.79
3.37
#50-5426
#50-5406
#50-5411
High Power Crossovers
These high power crossovers are designed for
heavy-duty applications. Each crossover can
withstand continuous RMS power of 600 watts
and peak outputs exceeding 800 watts.
Order #
50-5406
50-5411
50-5414
50-5426
ohm rating/
description
8/3-way
8/2-way
8/2-way
8/lowpass
Crossover
Crossover frequency
Slope
(Hz)
(1-3)
18db
800/4500 $64.95
18db
1200
49.95
18db
3300
37.95
12db
150
47.95
(4-up)
$51.08
42.38
31.78
35.50
150 Watt Three-Way Crossovers
•Made of only the
highest quality
components •These
crossovers feature a
laminated core inductor in the woofer network to
accurately reproduce bass frequencies •The high
frequency coupling capacitor is a high grade
polymylar 250V capacity with excellent high
frequency characteristics •Crossover frequencies
are 800Hz and 4500Hz, at 12dB per octave •Power
handling is 150W RMS continuous •Available in
4ohm woofer models •8ohm for midrange and
tweeter •Made in USA
Order #
50-650
(1-3)
$29.47
(4-9)
$26.39
(10-up)
$24.34
Nonpolarized
Electrolytic
Capacitors
•Ideal for crossover
networks •Axial type
•Sorry-no mixing of
values for quantity pricing
Order #
µF
31-580
31-590
31-600
31-610
31-2025
31-620
31-2030
31-630
31-2035
31-640
31-650
31-660
31-2040
31-2045
.47
1.0
2.2
3.3
4.0
4.7
6.8
10.0
14.0
22.0
33.0
47.0
100.0
200.0
31-1290
31-1295
31-1300
31-1305
31-2050
31-1310
31-2055
31-1315
31-2060
31-1320
31-0685
31-0690
31-0695
31-2065
31-0700
31-0705
31-2070
.47
1.0
2.2
3.3
4.0
4.7
6.8
10.0
14.0
22.0
33.0
47.0
80.0
100.0
125.0
150.0
200.0
(1-4)
50 Volts
$1.50
1.50
1.50
1.38
1.32
1.80
1.50
1.50
1.65
2.00
2.35
1.60
3.16
3.48
100 Volts
1.80
1.80
1.80
1.80
2.20
2.00
2.15
1.17
2.10
2.00
2.25
1.94
2.03
3.95
3.48
3.94
7.18
(5-9)
(10-24)
$1.35
1.35
1.35
1.25
1.19
1.62
1.35
1.35
1.48
1.79
2.04
1.43
2.83
3.11
$1.15
1.15
1.15
1.09
1.04
1.39
1.15
1.15
1.27
1.54
1.76
1.24
2.58
2.83
1.62
1.62
1.62
1.62
1.95
1.79
1.93
1.14
1.88
1.79
2.02
1.76
1.96
3.54
3.11
3.57
6.65
1.39
1.39
1.39
1.39
1.73
1.54
1.66
1.04
1.62
1.54
1.73
1.64
1.72
3.22
2.83
3.24
6.06
200 Watt
Two-Way Crossover
•Mounted on printed
circuit board with easy
hook-up terminals
•Mylar capacitors and
heavy wire inductors
provide exceptional
frequency separation at
12dB slope •Power handling: 200W RMS
•For use with 8ohm drivers •Made in USA
Order #
50-1770
Crossover
Frequency
5000Hz
(1-3)
$11.36
(4-9)
$11.06
5
Item #
50-3010
50-3011
50-3012
50-3013
50-3014
50-3015
50-3016
50-3018
50-3019
50-3020
50-3022
50-3023
50-3024
50-3025
50-3026
50-3027
50-3029
50-3030
50-3031
50-3032
50-3033
50-3034
50-3037
5
#50-5414
(10-up)
$10.35
Single Channel
Sub Crossover with
Satellite Outputs
Single channel subwoofer
crossover with high pass
outputs for satellite
speakers. 12dB low pass of 100Hz. 6dB high pass.
Ideal when using single voice coil subs in separate
cabinets. Made in USA.
Type
Power
Order # Woofer Handling
(1-3) (4-9) (10-up)
50-1920 8ohm
150W RMS $24.34 $22.04 $19.99
300 Watt Sub Woofer
Crossovers with
Satellite Outputs
•These units are
rated at 300W RMS
continuous and use
large bobbin inductors
to accurately reproduce
bass frequencies •Dual
channel to be used with one dual voice coil sub
woofer or two single voice coil woofers •Crossover
frequency is 120Hz, at 12dB per octave •Satellite
output is 120Hz up, at 6dB per octave •Available
in 4ohm and 8ohm woofer models •Both models
are 8ohm for satellite output •Made in USA
Order #
50-750
50-755
Type Woofer
4ohm
8ohm
(1-3)
$48.88
57.42
(4-up)
$43.98
53.24
Gold Plated
Speaker Terminal
For Sub Woofer
•Recessed panel
with four pairs of
gold plated binding
posts •Perfect for
dual voice coil sub
woofers input and
output •Terminals
are labeled for wiring ease
•Mounting hole dimensions: 33⁄4" x 51⁄4"
Order #
50-1460
(1-3)
$11.25
(4-up)
$9.89
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
149
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C52_pg_150
8/8/07
12:52 PM
Page 150
Speaker
Components
section
5
5
•Press fit design
saves installation time
•Made of high–impact
black plastic
•High–quality
construction •Color
coded terminals
•Recessed mount
•Push button
insert wire
Heavy-Duty Speaker
Binding Post Set
Gold plated binding posts
are ideal for demanding speaker enclosure
applications where thick walls prohibit the use of
conventional cup terminals. Extended thread length
is perfect for enclosures of up to 1" thick. To install,
simply drill a 1⁄4" hole, and tap the post into place
from the outside. The knurled shaft creates an
airtight fit and will not rotate. External connection
features a 8.5mm diameter post which acccepts
spade lugs, bare wire up to 8AWG or banana plugs.
Internal connections are solder lugs. Sold in pairs,
color coded red and black.
Order #
50-4475
Speaker Ports
B
A
Cup Type
Speaker Terminals
(1-9 prs.)
$9.29
(10-24 prs.)
$8.31
Order #/Fig.
Description
50-015 (A)
Terminals only
50-1490 (B)
Square push-in
50-1475 (C)
Subwoofer
C
Dimensions
(W) x (H)
$1.00
$0.90
$0.60
23⁄16" x 23⁄16"
0.60
0.50
-
37⁄8" x 57⁄16"
2.14
1.88
-
5
C
A
(25 prs.-up)
$6.45
(1-9)
$16.79
(10-up)
$13.49
Gold Plated
Push Button
Speaker Terminals
(10-24 prs.)
$3.69
(25 prs.-up)
$3.19
4 Terminal
•High-quality plastic
construction •Push
button and insert wire
•Holds wire securely in place •Color coded red and
black •Dimensions: 23⁄4" (W) x 15⁄16" (H)
Order #
50-020
(1-9)
$1.49
(10-24)
$1.33
(25-up)
$1.02
2 Terminal
•Mounts on speaker
for fast and secure
connection •Color
coded red and black
•Dimensions: 23⁄16" (W) x 15⁄16" (H)
Order #
50-010
(1-9)
$1.09
(10-24)
$0.80
(25-up)
$0.75
NET 30
Terms
150
(10-up)
$0.41
0.62
0.73
0.83
#50-1145
#50-575
Adjustable
Speaker Ports
•Made of
high-impact black
plastic •Screws
not included
Mounting
Flange
Dia. (1-3) (4-9)
53⁄4"
$6.09 $5.45
33⁄4"
2.29 1.95
(10-up)
$4.83
1.53
Order Online
www.mcmelectronics.com
•These sturdy metal
grills will protect your
speakers and give
them a professional
appearance •Black
•Low profile design
•Comes complete with
mounting hardware
and metal ring
•Sold individually
B
E
D
Gold Plated Speaker Terminals
•High powered speaker terminals for use with
heavy–duty speaker wire •Made of high–quality
plastic construction •Gold plated binding post
•Available in round, square and rectangular
bi–wire with bridge
Fig.
B
C
A
D
E
Great for converting
screw type terminals
on speakers, amplifiers,
and power supplies.
Color coded red and
black •Screw length: 1⁄2"
•Sold in pairs
(1-9 prs.)
$4.49
(4-9)
$0.52
0.73
0.83
1.04
Speaker Grills
Beautifully machined gold plated
brass binding post accepts up to
8 gauge wire for extreme high
current applications. Dual
binding posts are incorporated for
bi–amplification or heavy gauge
jumper bars can be utilized. Gold plated 1⁄4" male
spade connectors are supplied on the rear for easy
connections to speaker. Dimensions: 51⁄16" x 57⁄8".
Cut-out hole dimensions: 37⁄8" x 45⁄8"
Order #
50-590
(1-3)
$0.60
0.81
1.01
1.32
Port
Order # Length
Dia.
50-1145 61⁄4"~113⁄4" 43⁄8"
50-575 51⁄4"~91⁄2" 21⁄2"
Heavy-Duty Gold
Plated Speaker Terminal
Order #
50-5455
(L) x (I.O.)
4.00" x 1.48"
2.42" x 1.96"
3.14" x 2.94"
5.19" x 2.94"
(1-9) (10-24) (25-up)
3 ⁄16" x 2 ⁄8"
3
Order #
50-1215
50-1160
50-1195
50-1190
Order #
50-1275
50-1280
50-1485
50-1500
50-1495
Type
Square
Bi–wiring/Bridge
Round
Surface
Surface
(1-9)
$3.89
5.99
3.95
2.89
2.19
(10-up)
$3.25
5.35
3.71
2.67
1.89
Square and Round Cup
Speaker Terminals
•Economical speaker terminals made
of high–quality plastic •Color coded
•Recessed mount •Push button insert
wire •Square: 21⁄4" x 21⁄4" •Round:
3" (O.D.), 2" (I.D.)
#50-1435
Order # Range
(1-9) (10-24) (25-up)
50-1435 Round $0.89 $0.65 $0.63
50-1440 Square 0.69 0.50 0.48
Order #
50-1100
50-1115
50-1120
50-1125
50-1130
Diameter
31⁄2"
61⁄2"
8"
10"
12"
(1-3)
$3.23
5.37
6.05
9.43
12.35
(4-9)
$2.88
5.07
5.66
8.47
12.01
(10-up)
$2.21
4.61
5.12
7.45
11.26
(4-9)
$2.52
3.69
3.94
7.07
9.87
(10-up)
$2.10
3.52
6.13
-
Speaker Grills
•Protect your valuable
speakers with these
sturdy grills •Grills are
metal and have a rubber
strip surrounding
their edge •Grills
sold individually
Order #
50-510
50-525
50-530
50-540
50-545
(Dia)
5"
8"
10"
15"
18"
(1-3)
$2.96
4.40
4.43
8.07
11.06
#50-1440
Mounting
Hardware
Speaker Terminal Cup
Perfect for the recessed
mounting in the rear of
most speaker systems.
Gold plated binding posts
are mounted to a black
textured ABS cup, and
accept banana plugs, bare
wire up to 12AWG or large
spade terminals. Rear
connections are solder type and
will also accept 3⁄16" female quick disconnects.
Dimensions: •Overall diameter: 41⁄8" •Required
cutout: 3" •Mounting depth: 7⁄8"
Order #
50-1271
(1-9)
$3.29
(10-up)
$2.69
•For use with round speaker grills •Supports most
types of grills •Made of high-impact plastic •Can be
used with speaker grills #50-510 thru 50-545 •Black
•Four per package
Order #
50-1235
(1-9 pkgs.)
$2.05
(10-24 pkgs.)
$1.58
(25 pkgs.-up)
$1.26
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising