Sena Bluetooth Audio Pack for GoPro®

Sena Bluetooth Audio Pack for GoPro®
Sena Bluetooth Audio Pack for GoPro®
User's Guide
© 1998-2014 Sena Technologies Inc. All rights reserved.
Sena Technologies Inc. reserves the right to make any changes and improvements to its product
without prior notice.
GoPro® is a registered trademark of Woodman Labs of San Mateo, California. Sena Technologies, Inc.
(“Sena”) is not affiliated with Woodman Labs. The Sena Bluetooth Audio Pack for GoPro® is an aftermarket accessory specially designed and manufactured by Sena Technologies, Inc. for the GoPro®
Hero3 allowing for Bluetooth capabilities.
Sena™ is a trademark of Sena Technologies Inc. or its subsidiaries in the USA and other countries.
SMH10™, SMH10R™, SMH5™, SMH5-FM™, SPH10™, EXPAND™, SPH10H™, SPH10H-FM™, SPH10S™,
SR10™, SR10i™, SM10™, GoPro® Pack™ are trademarks of Sena Technologies, Inc. or its subsidiaries.
These trademarks may not be used without the express permission of Sena.
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks
by Sena is under license. Other trademarks and tradenames are those of their respective owners.
1. INTRODUCTION ..............................................4
2. PACKAGE CONTENTS .....................................5
3. GETTING STARTED..........................................6
Attaching the Bluetooth Audio Pack to the GoPro®....6
Removing the Bluetooth Audio Pack from the
GoPro®.....................................................................................7
Installing the Waterproof Case.......................................8
Replacing Backdoor ....................................................... 11
Powering On ...................................................................... 12
Powering Off...................................................................... 12
Charging.............................................................................. 13
Checking Battery Level .................................................. 14
Factory Reset ..................................................................... 16
4. OPERATION ....................................................17
Pairing with Headsets..................................................... 18
Start Recording ............................................................... 19
Ultra HD Voice Recording™ Mode & Normal Voice
Recording Mode ............................................................... 22
Sidetone Setting .............................................................. 23
Bluetooth Audio Mix....................................................... 23
Firmware Upgrade .......................................................... 24
5. OPERATION QUICK REFERENCE .................25
6. SPECIFICATIONS............................................26
CERTIFICATION AND SAFETY APPROVALS...27
FCC Compliance Statement ......................................... 27
FCC RF Exposure Statement......................................... 28
FCC Caution ....................................................................... 28
CE Declaration of Conformity ..................................... 28
Industry Canada Statement ........................................ 29
Bluetooth License ........................................................... 29
WEEE (Waste Electrical and Electronic
Equipment) ........................................................................ 30
SAFETY INFORMATION ....................................30
Product Storage and Management........................... 30
Product Use........................................................................ 31
Battery.................................................................................. 32
PRODUCT WARRANTY AND DISCLAIMER ....33
Limited Warranty.............................................................. 33
Warranty Exclusions ........................................................ 36
Warranty Service .............................................................. 38
Return for Full Refund .................................................... 39
3
English
CONTENTS
1. INTRODUCTION
Thank you for choosing the Sena Bluetooth
Audio Pack for GoPro®. The Sena Bluetooth
Audio Pack for GoPro® is a specially designed
adapter for the GoPro® Hero3 and Hero3+
allowing for Bluetooth capabilities. With the
use of Bluetooth headsets, the Sena Bluetooth
Audio Pack for GoPro® allows users to add
their voice to the video on-the-fly using the
Bluetooth Audio Recording™ feature. Being
able to narrate the video during recording not
only provides users a whole new experience
but also reduces the need for follow-up audio
editing providing real-time audio experiences.
Please read this user’s guide carefully before
using this Bluetooth Audio Pack. Also visit
www.sena.com for the latest version of the
user’s guide and firmware for additional
information related to Sena Bluetooth
products.
4
Sena Bluetooth Audio Pack for GoPro® includes
the following features:
Compatibility with GoPro® Hero3 and GoPro®
Hero3+ cameras only
Real time voice transfer to GoPro® Hero3 and
Hero3+
Intercom conversation transfer up to 3 Sena
headsets
Ultra HD Voice Recording™ by using Sena
products
Pair up to 3 different headsets
Sena Bluetooth Audio Pack for GoPro® is
compatible with the following models:
Sena headsets
Non-Sena mono & stereo Bluetooth headsets
with mobile phone pairing capability
Non-Sena motorcycle Bluetooth headsets
Bluetooth Audio Pack
Waterproof Case
Internal Stereo
Microphones
Reset Pin Hole
Skeleton Backdoor
Power Switch
Charging Status LED
DC Power Charging &
Firmware Upgrade Port
Status LED
Audio Port
Audio Connector
Pairing Button
Mic Switch
<Front>
<Rear>
5
English
2. PACKAGE CONTENTS
3. GETTING STARTED
Attaching the Bluetooth Audio Pack to
the GoPro®
1
Slide the hooked end of the Bluetooth
Audio Pack into the groove on the right
side of the camera body.
2
Push the Bluetooth Audio Pack into the
GoPro® bus port on the back of the camera.
1
2
6
3
Connect the GoPro® to Bluetooth Audio
Pack with the Audio Connector.
1
2
Pull back on left side of the Bluetooth
Audio Pack to disconnect from the GoPro®
bus port.
3
Slide the hooked end of the Bluetooth
Audio Pack out of camera groove.
Remove the Audio Connector.
English
Removing the Bluetooth Audio Pack
from the GoPro®
7
Installing the Waterproof Case
1
Using an index finger, press down and
slide the buckle release button to slide the
latch forward. While pressing down on the
buckle release button with an index finger,
use the thumb to open the buckle.
2
1
Standard Backdoor
2
1
Skeleton Backdoor
8
2
Unhook the buckle from the case to open
the backdoor.
1
2
Standard Backdoor
1
2
Skeleton Backdoor
3
Insert the camera into the waterproof case.
1
3
2
Standard Backdoor
4
Close the backdoor and hook the buckle
into it. Press down on the latch firmly until
the latch clicks shut.
1
3
2
Skeleton Backdoor
Replacing Backdoor
1
Remove the standard backdoor from the
waterproof case.
11
English
Before using the waterproof case in a wet
environment, ensure that it is completely
sealed.
Do not open the case where it would be
exposed to dust or sand, and be sure to
remove any foreign objects from any part
of the case before closing the case. Failure
to observe these precautions could result
in damage to the Bluetooth Audio Pack
and the GoPro camera.
2
Fit the skeleton backdoor to the hinge of
the waterproof case.
Powering On
Push the Power Switch down to power on, then
the LED will flash blue.
Powering Off
Push the Power Switch upward to power off,
then the LED will turn red and automatically be
turned off shortly.
OFF
ON
12
Off
Mic
Switch
Audio Source
Off
None
On
Internal microphone of
the Bluetooth Audio Pack
Off
Microphone of Bluetooth
headset
On
Internal microphone
of the Bluetooth Audio
Pack + microphone of
Bluetooth headset
On
Charging
You can charge the Bluetooth Audio Pack by
connecting a USB power & data cable into a
computer USB port or USB wall charger. You
can use any standard mini-USB cable including
the USB cable supplied in the GoPro® to charge
the Bluetooth Audio Pack. The LED turns red
while charging, and turns blue when the
Bluetooth Audio Pack is fully charged. It takes
about 2.5 hours to fully charge.
13
English
Power
Switch
When using the skeleton backdoor, you
can charge the Bluetooth Audio Pack by
connecting any mini-USB cable, including the
cable supplied by GoPro, as shown image.
LED
Status
4 flashes
High, 70 to 100 % remaining
battery
3 flashes
Medium, 30 to 70 % remaining
battery
2 flashes Low, 0 to 30 % remaining battery
Press the Pairing Button 3 times, you can check
the battery level with voice prompts from a
connected headset.
Checking Battery Level
When you power on the Bluetooth Audio Pack,
you can check the battery level in the LED
indicator flashing red as shown table.
14
When the remaining battery is low, you will
also hear a voice prompt saying "GoPro
Pack low battery" from the connected
headset. The Bluetooth Audio Pack will be
turned off after 3 minutes.
English
Fault Reset
When the Bluetooth Audio Pack is not working
properly or is in faulty status for any reason,
you can reset it.
You may reset by having the Bluetooth Audio
Pack powered on and pushing the Reset Pin
Hole at the back of it. Insert a paper clip into
the Reset Pin Hole and press the reset button
with light pressure. After the fault reset is
completed, it will be automatically turned on.
15
Factory Reset
Through the factory reset, you can restore
the factory default settings of the Bluetooth
Audio Pack. Then all of the previous pairing
information is deleted.
1
2
16
Press and hold the Pairing Button for
10 seconds to enter the factory reset
mode. Then the LED will turn red and
you can hear the voice prompts from the
connected headset.
Press the Pairing Button again to reset the
Bluetooth Audio Pack.
10 sec.
Press
If you do not press the Pairing Button within
10 seconds after being entered to the factory
reset mode, the Bluetooth Audio Pack will
exit the factory reset mode automatically.
Headset
Audio Recording
Mode
Mic
Switch
Off
CD-quality voice
recording without
ambient sound
On
CD-quality voice
recording with ambient
sound
Off
Normal quality voice
recording without
ambient sound
Advanced Noise
Control™
On
Normal quality voice
recording with ambient
sound
Advanced Noise
Control™
Ultra HD
Voice
Recording™
Sena
Single
Voice
Application
Normal
Voice
Recording
Headset
Audio Recording
Mode
Mic
Switch
Off
Sena
Intercom
Voice
Normal
Voice
Recording
On
Non-Sena
Single
Voice
Normal
Voice
Recording
Off
On
English
Advanced Noise Control™
4. OPERATION
Application
Intercom conversation
recording
Normal quality voice
recording without
ambient sound
Advanced Noise
Control™
Intercom conversation
recording
Normal quality voice
recording with ambient
sound
Advanced Noise
Control(TM)
Normal quality voice
recording without
ambient sound
Normal quality voice
recording with ambient
sound
17
Pairing with Headsets
For Sena Headsets
To record your voice to the GoPro® by using
the Bluetooth Audio Pack, you should pair the
Bluetooth Audio Pack with a Bluetooth headset
(or microphone). This pairing operation is only
required once for each Bluetooth headset.
1
Press and hold the Pairing Button of the
Bluetooth Audio Pack for 5 seconds until
the LED flashes red and blue alternately.
2
Enter into the intercom pairing mode of
the headset. Then the headset is paired
automatically with the Bluetooth Audio
Pack. You do not need to press any buttons
for pairing. For details on intercom pairing,
refer to the user’s guide of Sena headset.
3
When the LED flashes blue, the pairing is
completed. Then you will hear the voice
prompt saying “GoPro Pack connected”
from the connected Sena headset.
The Bluetooth Audio Pack will remain paired
with the headsets after the first pairing process
is completed and automatically connected
to the paired headsets again within the
connection range. The pairing procedures of
the Sena headsets are different from those of
the non-Sena headsets. Make sure to follow the
procedures below before pairing each headset.
18
Start Recording
1
Press and hold the Pairing Button of the
Bluetooth Audio Pack for 5 seconds until
the LED flashes red and blue alternately.
2
Enter into the handsfree pairing mode
of the non-Sena headset. For details on
handsfree pairing, refer to the user’s guide
of the corresponding headset.
3
When the LED flashes blue, the pairing is
completed. Then you will hear the voice
prompt saying “GoPro Pack connected”
from the connected corresponding
headset.
The Bluetooth Audio Pack will remain paired
with the headsets and the audio channel
is open after the first pairing process is
completed. While the audio channel remains
open, your voice or intercom conversation
keeps being transferred to the GoPro®. Then
start recording on the GoPro®, and your voice
will be added to the video.
If the Bluetooth Audio Pack is disconnected
from the paired headset suddenly even
within the connection range, press the
Pairing Button once to reconnect to each
other.
When you connect the GoPro® to the
Bluetooth Audio Pack with the Audio
Connector, the internal stereo microphones
of the GoPro® are disabled and the internal
stereo microphones of the Bluetooth Audio
Pack operate as that of the GoPro®.
19
English
For Non-Sena Headsets
For Sena Headsets
You can connect the Bluetooth Audio Pack with
Sena headsets and transfer the conversations
to the Bluetooth Audio Pack by establishing
intercom connections at the same time.
1
2
Turn on the paired Sena headset, and then
the Bluetooth Audio Pack is automatically
connected to the paired headsets.
The audio channel between the Bluetooth
Audio Pack and the Sena headset is open.
Then the status LED of the Bluetooth Audio
Pack flashes blue.
Start recording on the GoPro®.
You can record intercom conversation among
two or three intercom friends who use Sena
headsets. For details on intercom conversation,
refer to the user’s guide of Sena headset.
20
You
(A)
First Friend
(B)
Second Friend
(C)
Bluetooth Audio
Pack (A)
Bluetooth Audio Pack Connection for Intercom
You
(A)
Bluetooth
Audio Pack (A)
First Friend
(B)
Bluetooth
Audio Pack (B)
Dual Bluetooth Audio Pack Connection for Sound Sharing
You can connect the Bluetooth Audio Pack with nonSena headsets and transfer your voice to the Bluetooth
Audio Pack.
1
Turn on the paired non-Sena headset,
and then the Bluetooth Audio Pack is
automatically connected to the headset.
The audio channel between the Bluetooth
Audio Pack and the non-Sena headset is
open. Then the status LED of the Bluetooth
Audio Pack flashes blue.
2
Start recording on the GoPro®.
You can open or close the audio channel
between the Bluetooth Audio Pack and the
headset by pressing the Pairing Button once
on the Bluetooth Audio Pack or making a
phone call on the headset. Please refer to the
headset user’s guide for more information.
21
English
For Non-Sena Headsets
Ultra HD Voice Recording™ Mode &
Normal Voice Recording Mode
Enabling the Ultra HD Voice Recording™
Mode
When using a Sena headset, Ultra HD Voice
Recording™ is supported; it enables you to
record your voice in CD-quality with live
ambient sound. Ultra HD Voice Recording™ is
available only when a single Sena headset is
connected with the Bluetooth Audio Pack. It is
not supported in conference intercom mode.
When you are using a Sena headset, you may
switch to Normal Voice Recording Mode if you
want to apply normal quality voice recording
with the Advanced Noise Control™ feature. If
you use non-Sena Bluetooth headset, Normal
Voice Recording Mode is the only mode that
you may use. You can use this mode after
upgrading the latest firmware of the Sena
products.
Press the Pairing Button once to enable the
Ultra HD voice mode. When the mode is set,
you can hear a beep and the corresponding
voice prompt.
22
Enabling the Normal Voice Recording
Mode
Press the Pairing Button once again to enable
the Normal Voice Recording Mode. When
the mode is set, you can hear a beep and the
corresponding voice prompt.
Bluetooth Audio Mix
When using a Sena Headset, you can enable or
disable the sidetone function while the audio
channel between the Bluetooth Audio Pack
and the headset is open. When the sidetone
function is enabled, you can hear your own
voice echoed from the Bluetooth Audio Pack
through the headset.
When you turn on the Mic Switch, the internal
stereo microphones are activated; the
Bluetooth Audio Pack transmits the mixed
audio signals from the Bluetooth Audio Pack’s
internal microphones and the connected
headset to the GoPro®. When the Mic Switch is
turned off, only the Bluetooth Audio Pack from
the headset are transferred to the GoPro®.
Enabling the Sidetone
Press the Pairing Button twice to enable the
sidetone function.
Disabling the Sidetone
Press the Pairing Button twice again to disable
the sidetone function.
The Bluetooth Audio Mix function helps you
to record your voice with ambient sound.
When you are very close to the Bluetooth
Audio Pack, your voice may be echoed and
recorded together.
23
English
Sidetone Setting
Firmware Upgrade
The Bluetooth Audio Pack supports firmware
upgrade function. Please visit Sena Bluetooth
web site at www.sena.com to check the latest
software downloads.
24
Type
Operation
Button
Duration
LED
Power on
Power
Switch
Pushing
down
Blue
Power off
Power
Switch
Pushing
upward
Red
5 sec
Blue & red
alternatively
flashing
Basic
Function
Headset pairing
Pairing
Button
Pairing
English
5. OPERATION QUICK REFERENCE
Type
Operation
Ultra HD Voice
RecordingTM Mode
Transmitting / Normal Voice
Voice Signals Recording toggle
for Sena
Headsets Enabling/Disabling
the side tone
function
Opening audio
Transmitting channel
Voice Signals
for Non-Sena
Headsets Closing audio
channel
Pairing
Button
Making
or
ending
a phone
call
button
Pressing
Blue
flashing
Solid red
Battery
Check
Factory Reset
Duration
LED
Pairing
Button
Pressing
Pairing
Button
Pressing
twice
Audio Mix on
Mic
Switch
Pushing
down
Audio Mix off
Mic
Switch
Pushing
upward
Battery check
Pairing
Button
Pressing
three times
Entering factory
reset mode
Pairing
Button
10 sec
Solid red
Factory reset
Pairing
Button
Pressing
Solid purple
Audio Mix
Reconnecting
Bluetooth device
Button
25
6. SPECIFICATIONS
Talk time
3 hours
Stand-by time
3 days
General
Battery
Charging
time
Type
Operating temperature -10˚C ~ 55˚C (14°F ~ 131°F)
General
Dimensions
(main module)
Weight
Working
distance
26
59 mm x 41 mm x 16.6 mm
(2.3 inch x 1.6 inch x 0.6 inch)
21g
Ultra HD Voice Recording :
100 meters (110 yards)
Non-Sena
headsets
Up to 100 meters (110 yards)
(It depends on the
headset performance.)
Lithium polymer battery
Version
Bluetooth 3.0
Profile
Headset Profile (HSP),
Hands-Free Profile (HFP)
Bluetooth
TM
Sena
headsets
2.5 hours
Audio
Compatible models
Internal stereo microphones
GoPro® Hero3, Hero3+
FCC Compliance Statement
This device complies with part 15 of the FCC
rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
This equipment has been tested and found
to comply with the limits for a Class B digital
device pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment on and off, the user
is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antennae
Increase the separation between the
equipment and the receiver
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/
TV technician for help.
27
English
CERTIFICATION AND SAFETY
APPROVALS
FCC RF Exposure Statement
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. End users must follow the
specific operating instructions for satisfying RF
exposure compliance. The antenna used for this
transmitter must not transmit simultaneously
with any other antenna or transmitter, except in
accordance with FCC multi-transmitter product
procedures.
FCC Caution
Any changes or modifications to the equipment not expressly approved by the party
responsible for compliance could void user’s
authority to operate the equipment.
28
CE Declaration of Conformity
This product is CE marked according to the
provisions of the R&TTE Directive (99/5/EC).
Hereby, Sena declares that this product is in
compliance with the essential requirements
and other relevant provisions of Directive
1999/5/EC. For further information, please
consult www.sena.com. Please note that
this product uses radio frequency bands not
harmonized within EU. Within the EU this
product is intended to be used in Austria,
Belgium, Denmark, Finland, France, Germany,
Greece, Ireland, Italy, Luxembourg, The
Netherlands, Portugal, Spain, Sweden, United
Kingdom and within EFTA in Iceland, Norway
and Switzerland.
Bluetooth License
The Bluetooth® word mark and logos are
owned by the Bluetooth SIG, Inc. and any use
of such marks by Sena is under license. Other
trademarks and trade names are those of their
respective owners.
The product is compliant with and adopts
the Bluetooth® Specification 3.0 and has
successfully passed all interoperability tests that
are specified in the Bluetooth® specification.
However, interoperability between the device
and other Bluetooth®-enabled products is not
guaranteed.
29
English
Industry Canada Statement
This device complies with Industry Canada
license-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference,
including interference that may cause
undesired operation of the device.
WEEE (Waste Electrical and Electronic
Equipment)
The crossed-out wheel bin
symbol on the product,
literature, or packaging reminds
you that all electrical and
electronic products, batteries,
and accumulators must be taken
to separate collection at the end
of their working life. This requirement applies
to the European Union and other locations
where separate collection systems are
available. To prevent possible harm to the
environment or human health from
uncontrolled waste disposal, please do not
dispose of these products as unsorted
municipal waste, but hand it in at an official
collection point for recycling.
30
SAFETY INFORMATION
Please ensure that the product is properly used
by observing the warnings and cautions below
to prevent any risk and/or damage to property.
Product Storage and Management
Keep the product free of dust. It may
damage mechanical and electronic parts of
the product.
Do not store the product in high
temperatures as this may reduce the life
span of electronic devices, damage the
battery, and/or melt plastic parts of the
product.
Do not store the product in cold
temperatures. Abrupt changes in
temperatures may cause condensation and
damage electronic circuits. Do not clean
the product with cleaning solvents, toxic
chemicals, or strong detergents as this may
damage the product.
Product Use
In some regions, it is prohibited by law to
ride motorcycles or bicycles while wearing
headsets. Therefore be certain to comply
with all relevant laws in the region before
using the product.
Use of the product at a high volume for
a long period of time may damage your
eardrums or hearing ability. Keep the volume
at a modest level.
Do not cause impact to the product or touch
it with sharp tools as this may damage the
product.
Do not use the product in high-temperatures
or apply heat to the product as this may
cause damage, explosion, or fire.
Keep the product dry and away from water.
It may damage the product.
Keep product away from pets or small
children. It may damage the product or
cause accidents.
Do not use the product near a microwave
oven or a wireless LAN device as this may
cause malfunction or interference with the
product.
In any place where wireless communication
is prohibited, such as hospitals or
airplanes, turn off the power and refrain
from using the product. In a place where
31
English
Do not paint the product. Paint may obstruct
moving parts or interfere with the normal
operation of the product.
Do not drop or otherwise shock the product.
It may damage the product or its internal
electronic circuits.
Do not disassemble, repair or modify the
product as this may damage the product
and invalidate the product warranty.
wireless communication is prohibited,
electromagnetic waves may cause hazards
or accidents.
Do not use the product near hazardous
explosives. When there are near any
explosion hazards, turn off the power and
heed any regulations, instructions, and signs
in the area.
When using the product, drive at a low
speed (slower than 35km/h) for safety. In
addition, be certain to conform to laws
regarding the use of communications
devices while driving.
Do not put the product where it may hamper
the driver’s vision or manipulate it while
driving. This may cause traffic accidents.
Before driving, fasten the product to the
helmet, and double-check that it is fastened.
Separation of the product while driving may
cause damage to the product or accidents.
32
If the product is damaged, stop using
it immediately. It may cause damage,
explosion, or fire.
Battery
This product has an irreplaceable rechargeable
battery inside. Therefore, when using the
product, make sure to adhere to the following:
Never separate the battery from the product
as this may damage the product.
The battery performance may be reduced
over time with usage.
In recharging the battery, make sure to
use an approved charger provided by
the manufacturer. Use of a non-approved
charger may cause fire, explosion, leakage,
and other hazards may also reduce the life
time or performance of the battery.
Store the battery at temperatures of
15°C~25°C (59°F~77°F). Higher or lower
PRODUCT WARRANTY AND
DISCLAIMER
English
temperatures may reduce the capacity and
life of the battery, or may cause temporary
non-operation. Do not use the product
in sub-zero temperature, because it may
cause serious reduction of the battery
performance.
If you apply heat to the battery or throw it
into fire, it may explode.
Do not use the product with a damaged
battery. It may explode and/or cause
accidents.
Never use a damaged charger. It may
explode and/or cause accidents.
Battery life may vary depending on
conditions, environmental factors, functions
of the product in use, and devices used with
it.
Limited Warranty
Limited Warranty
Sena Technologies, Inc. (“Sena”) guarantees
the product quality based on the technical
specification stated in the product manual, and
data regarding product warranty. Here, product
warranty extends to the product only. Sena will
not be liable for any loss, damage of human life,
or loss of property which may result from using
the product beyond defective parts or flaws
that occur due to problems in manufacture.
33
Warranty Period
Sena guarantees free-of-charge replacements
of defective parts of the product or flaws
that may have occurred due to problems in
manufacture for a period of 2 years from the
date of initial purchase.
Termination
Quality warranty of the product becomes
effective on the date of initial purchase. In
addition, the quality warranty of the product
expires when the warranty period expires.
However, in the following cases, the warranty
will be terminated prematurely.
In the event the product has been sold or
transferred to a third party.
In the event the manufacturer’s name, serial
number, product label, or other markings
have been modified or removed.
34
In the event any unauthorized person has
tried to disassemble, repair, or modify the
product.
Notice and Waiver
By buying and using this product, you
relinquish considerable legal rights including
any claim for compensation for damages.
Therefore, be certain to read and understand
the following terms and conditions before
using the product. Use of this product will
constitute consent to this agreement, and
forfeiture of rights to all claims. If you do not
consent to all the terms and conditions of this
agreement, return the product for a refund.
(Refer to the section “Return for Full Refund”.)
1. You agree that you, your descendants, legal
proxies, successors, or transferees will not
raise permanent volitional request for any
suit, claim, implementation, redemption or
4. You must be an adult who can take
responsibilities for using the product.
5. You must read and understand the following
warnings and alerts:
Sena; together with employees,
managers, partners, subsidiaries,
representatives, agents, supporting
firms and suppliers, sole sellers of Sena
(collectively referred to as “the company”)
recommend that, before using the
product and similar devices of any
brands including its derivative models,
you collect any relevant information in
advance and be entirely prepared in
terms of weather, traffic situation, and
road conditions.
When you use the product while you
operating any vehicle or equipment
such as motorcycles, scooters, mopeds,
ATVs, or quad-bikes (hereinafter called
35
English
similar action from Sena with regard to any
occasion such as difficulty, pain, suffering,
inconvenience, loss, injury, or death which
may occur to you or a third party during the
use of this product.
2. You must completely understand and
accept all risks (including those occurring
due to any careless behavior of yours or
others) which may occur during the use of
this product.
3. You are responsible for ensuring that
your medical condition permits usage of
the product and that you are in sufficient
physical condition for using any device
which can be used with it. In addition, you
must ensure that the product does not limit
your abilities and that you are able to use it
safely.
as “transportation means”), you must
take complete caution regardless of the
location of such operation.
Use of the product on the road may
cause such risks as fracture, serious
disability, or death.
Risk factors, which may occur when
you use the product, may be due to
errors of the manufacturer, its agents, or
third parties which are involved in the
manufacturing.
Risk factors, which may occur
when you use the product, may be
unforeseeable. Therefore, you must take
full responsibility for any damage or
loss caused by all risk factors which may
occur when using the product.
When you use the product, use good
judgment; never use it under the
influence of alcohol.
36
6. You must read and completely understand
all terms and conditions of legal rights and
warnings that are involved in using the
product. In addition, usage of the product
constitutes acceptance of all terms and
conditions regarding waiver of rights.
Warranty Exclusions
Reasons for Limited Liabilities
If you do not return the product after
purchasing it, you relinquish all rights
to liabilities, loss, claims, and claims for
reimbursement of expenses (including
attorney’s fees). Therefore, Sena will not be
liable for physical injury, death, or any loss or
damage of transportation means, possessions,
or assets which belong to you or third parties
that may have occurred while you use the
product. Further, Sena will not be liable for
Use of this product may violate local or national
laws. In addition, be aware once again that
correct and safe use of the product is entirely
your responsibility.
Limitation of Liability
TO THE FULL EXTENT ALLOWED BY LAW, SENA
EXCLUDES FOR ITSELF AND ITS SUPPLIERS
ANY LIABILITY, WHETHER BASED IN CONTRACT
OR TORT (INCLUDING NEGLIGENCE), FOR
INCIDENTAL, CONSEQUENTIAL, INDIRECT,
SPECIAL, OR PUNITIVE DAMAGES OF ANY
KIND, OR FOR LOSS OF REVENUE OR PROFITS,
LOSS OF BUSINESS, LOSS OF INFORMATION
OR DATA, OR OTHER FINANCIAL LOSS ARISING
OUT OF OR IN CONNECTION WITH THE
SALE, INSTALLATION, MAINTENANCE, USE,
PERFORMANCE, FAILURE, OR INTERRUPTION
OF ITS PRODUCTS, EVEN IF SENA OR ITS
AUTHORIZED RESELLER HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES, AND
LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT,
OR REFUND OF THE PURCHASE PRICE PAID, AT
SENA’S OPTION. THIS DISCLAIMER OF LIABILITY
FOR DAMAGES WILL NOT BE AFFECTED IF ANY
REMEDY PROVIDED HEREIN SHALL FAIL OF ITS
ESSENTIAL PURPOSE. IN ANY CASE, THE TOTAL
COMPENSATION LIABILITIES OF SENA OR ITS
SALES AGENTS SHALL NOT EXCEED THE PRICE
PAID FOR THE PRODUCT BY THE PURCHASER.
37
English
any substantial damage not related to the,
condition, environment, or malfunction of the
product. All risks related with the operation
of the product depend entirely on the user
regardless of its use by the initial purchaser of a
third party.
Liabilities Disclaimer
In addition to damages which may occur due
to the use of the product, Sena will not be
liable for damages of the product which occur
due to the following events.
In the event the product is misused or
used for purposes other than its intended
purposes.
In the event the product is damaged
because the user does not follow the content
of the product manual.
In the event the product is damaged
because it has been left unattended or has
undergone any other accident.
In the event the product is damaged
because the user has used any parts or
software which are not provided by the
manufacturer.
38
In the event the product is damaged
because the user has disassembled, repaired,
or modified it in such way as is not explained
in the product manual.
In the event the product is damaged by a
third party.
In the event the product is damaged due to
Acts of God (including fire, flood, earthquake,
storm, hurricane or other natural disaster).
In the event the surface of the product is
damaged by use.
Warranty Service
To obtain product warranty service, send the
defective product, at your expense, to the
manufacturer or the seller along with proof of
purchase (a receipt that shows the purchase
date, a product registration certificate of the
Website, and other relevant information). Take
necessary measures to protect the product. In
Free-of-charge Service
Sena will provide free-of-charge repair or
replacement service for the product when
product defects occur within the scope of the
product warranty during the warranty period.
Charged Service
Sena will provide charged repair or
replacement service for the product when the
product warranty period has been expired
or when the product damage is beyond the
scope of the product warranty. For further
information on charged service, you may
contact the service center of Sena.
Return for Full Refund
Should you not agree to the terms and
conditions explained above, you may return
the product for a full refund. To get a refund,
within 14 days from the purchase date you
must return the product to the seller in such a
condition as it was purchased.
Unless you return the product within 14 days
from the purchase date, you will have read
and agreed to all the terms and conditions
explained above, and Sena will not be liable
for any claim for damages related with the
product.
39
English
order to get a refund or replacement, you must
include the whole package as it was purchased.
1.0.0
www.sena.com
User's Guide for Firmware v1.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising