SD222-YA Series
Display
User Guide
Table of contents
Notices.......................................................................................................... iv
Safety information........................................................................................ v
Care and cleaning........................................................................................ vi
1.1Welcome........................................................................................ 1-1
ii
1.2
Package contents.......................................................................... 1-1
1.3
Assembling the base of the display............................................ 1-2
1.4
Display introduction..................................................................... 1-3
1.4.1
Front of the display.......................................................... 1-3
1.4.2
Rear of the display........................................................... 1-4
2.1
Detaching the arm/stand (for wall mounting)............................. 2-1
2.2
Adjusting the display.................................................................... 2-2
3.1
OSD (On-Screen Display) menu.................................................. 3-1
3.1.1
How to reconfigure........................................................... 3-1
3.1.2
OSD Function Introduction............................................... 3-1
3.2
Specifications................................................................................ 3-4
3.3
Get start with media player.......................................................... 3-5
3.3.1 Specification summary..................................................... 3-5
3.3.2
System requirement......................................................... 3-5
3.3.3
Getting to know the media player.................................... 3-5
3.3.4
Remote controller............................................................. 3-6
3.3.5
Getting your media player ready...................................... 3-6
3.4
Using the media player................................................................. 3-7
3.4.1
Main Menu....................................................................... 3-7
3.4.2 Configuring the media player setting............................... 3-7
3.4.3
Playing a movie................................................................ 3-7
3.4.4
Playing a music................................................................ 3-7
3.4.5 Configuring the audio playback settings.......................... 3-7
3.4.6
Viewing photos................................................................. 3-7
3.4.7
Setting background music for the slide show................... 3-8
3.4.8 Renaming files/folders..................................................... 3-8
3.5
Trouble shooting (FAQ)................................................................ 3-9
3.6
Supported Timing List................................................................ 3-11
Copyright © 2013 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND
SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
iii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iv
Safety information
Use only the AC/DC adapter model: EXA0901XA
• Before setting up the display, carefully read all the documentation that
came with the package.
• To prevent fire or shock hazard, never expose the display to rain or
moisture.
• Never try to open the display cabinet. The dangerous high voltages
inside the display may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
• Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
• The display should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power
standard.
• Do not overload power strips and extension cords. Overloading can
result in fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the
display in any area where it may become wet. Place the display on a
stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the display from damage due to
power surges.
• Never push objects or spill liquid of any kind into the slots on the
display cabinet.
• To ensure satisfactory operation, use the display only with UL listed
computers which have appropriate configured receptacles marked
between 100 - 240V AC.
• The socket-outlet shall be installed near the equipment and shall be
easily accessible.
• If you encounter technical problems with the display, contact a qualified
service technician or your retailer.
v
Care and cleaning
• Before you lift or reposition your display, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the display. When lifting or carrying the display, grasp the
edges of the display. Do not lift the display by the stand or the cord.
• Cleaning. Turn your display off and unplug the power cord. Clean the
display surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the screen. Never spray cleaner directly on the
screen, as it may drip inside the display and cause an electric shock.
The following symptoms are normal with the display:
• The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the power switch and turn it on again to make
sure that the flicker disappears.
• You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the power switch for hours.
• When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not try to repair the
display by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
vi
Where to find more information
Refer to the following sources for additional information and for product
and software updates.
1.
ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2.
Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
vii
1.1Welcome
Thank you for purchasing the ASUS® display.
The latest display from ASUS provides a crisper, broader, and brighter
screen, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the display brings you!
1.2
Package contents
Check your package for the following items:
Display set
Display base and screw
Quick start guide
Warranty card
Power cord
Remote controller and battery
•
1-1
If any of the above items is damaged or missing, contact your retailer
immediately..
Chapter 1: Product Introduction
1.3
Assembling the base of the display
1.
Remove the rear cover by pushing it downward.
2.
Flip over the arm hidden in the groove.
3.
Place the rear cover on the top of the groove and push it up with a
"click" sound.
4.
Attach the base to the arm and fasten the screw tightly.
5.
Adjust the display to the angle that is the most comfortable to you.
1
2
3
4
5
•
We recommend that you cover the table surface with soft cloth to prevent from
damaging the display.
ASUS LCD Monitor SD222 Series
1-2
1.4
Display introduction
1.4.1
Front of the display
2
1
1.
Remote control sensor:
•
2.
Power Indicator:
•
1-3
The display receives the command from the remote controller here.
The color of power indicator is as below.
Status
Description
White
Operating
Amber
Standby
Dark
Power off
Chapter 1: Product Introduction
1.4.2
Rear of the display
6
7
5
1
1.
VGA connector
2.
Audio-in jack
3.
Earphone-out jack
4.
Power-in jack
5.
Kensington lock
6.
Screw holes of mounting interface
7.
Control keypad
Item
OK
A
MENU
Key
Power
Input select
Return
Brightness up
Next
Volume
OK
Auto
Back
Menu
ASUS LCD Monitor SD222 Series
2 3 4
Description
To turn on and off the display
To switch between media player and VGA input
To return to the previous selection in the OSD
To adjust the brightness
To rise the numerical value of the selected function
To adjust the volume
To select the highlighted function in the OSD
To adjust screen automatically in VGA input
To lower the numerical value of the selected function
To enter or to exit the OSD menu
To turn on and off the key lock function by pressing 5
seconds
1-4
2.1
Detaching the arm/stand (for wall mounting)
The detachable stand of the display is specially designed for wall
mounting.
1.
Disconnect the power cord and the signal cables. Carefully place the
display face-side down on a clean surface, loosen the screw, and
detach the base from the arm.
2.
Push down the rear cover to remove it from the groove.
3.
Fold the arm back to the groove.
4.
Place the rear cover back to the groove and push it upward.
•
We recommend that you cover the table surface with soft cloth to prevent from
damaging the display.
•
Hold the stand while removing the screws.
1
2
3
4
•
The (100 x 100 mm) wall mount kit is not included in the product purchased.
•
Use only the UL listed wall mount bracket with minimum weight/load 14kg
(Screw size: M4 x 10 mm).
ASUS LCD Monitor SD222 Series
2-1
2.2
Adjusting the display
• For optimal viewing, we recommend that you look at the full face of
the display, and then adjust the display to the angle that is the most
comfortable to you.
• Hold the stand to prevent the display from falling while changing its
angle.
• You may adjust the display’s angle from -5˚ to 23˚.
-5 ~ 23
2-2
Chapter 2: Setup
3.1
OSD (On-Screen Display) menu
3.1.1
How to reconfigure
SD222
Color
Mode
Picture
Brightness
Input Select
Contrast
80
Menu
ASCR
ON
Dynamic
100
Saturation
50
Color Temp.
User Mode
Gamma
Move
2.2
OK
Exit
1.
Press the MENU button to activate the OSD menu. You may also use
the remote controller to activate the OSD by pressing the “guide” key.
2.
Press  and ► button to navigate through the functions. Press
the OK button to highlight and activate the desired function. If the
selected function has a sub-menu, press and ► button again to
navigate through the sub-menu. Press the OK button to highlight and
activate the desired sub-menu function.
3.
Press  and ► button to change the settings of the selected function.
4.
To exit from the OSD menu, press the MENU button. Repeat step 2
and step 3 to adjust any other function.
3.1.2
OSD Function Introduction
1.Color
Select the image color you like from this function.
SD222
Color
Mode
Picture
Brightness
Input Select
Contrast
80
Menu
ASCR
ON
Dynamic
100
Saturation
50
Color Temp.
User Mode
Gamma
Move
2.2
OK
Exit
•
Mode: There are standard, dynamic, soft, and monochrome preset
modes.
•
Brightness: To adjust the luminance ranging from 0 to 100.
The
button is a hotkey to activate this function.
•
Contrast: To adjust the contrast ranging from 0 to 100.
ASUS LCD Monitor SD222 Series
3-1
•
ASCR: to switch between On and Off to enable or disable the Asus Smart
Contrast Ratio function.
•
Saturation: To adjust the color saturation ranging from 0 to 100.
•
Color Temp.: There are three preset white balance modes (Cool,
Normal, and Warm) and one User mode.
•
Gamma: To alter the grayscale gamma between 2.2 and 1.8.
•
In the User Mode of the Color Temp., the user may configure the value of the
prime color R (red), G (green), and B (blue) ranging from 0 to 100.
2. Picture
You may adjust the Aspect Control, Over Scan, Position (VGA only),
and Focus (VGA only) in this menu item.
SD222
Color
Aspect Control
Full
Picture
OverScan
OFF
Input Select
Position
Menu
Focus
Trace Free
Move
3-2
OK
60
Exit
•
Aspect Control: To alter the aspect ratio among “Full”, “4:3”, “Full
Height” (only available for VGA input).
•
OverScan:To adjust the over-scan ratio for the media player.
•
Position: To adjust the horizontal (H-Position) and the vertical position
(V-Position) of the image from the VGA input. The adjustable range is
from 0 to 100.
•
Focus: To reduces the horizontal-line and the vertical-line noise of the
image from the VGA input by adjusting (Phase) and (Clock) separately.
The adjustable range is from 0 to 100.
•
Trace Free: To speed up the response time by Over Drive technology.
The adjustable range is from 0 to 100.
•
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
•
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
Chapter 3: General Instruction
3.
Input Select
Select the input source from VGA, Media player input signal.
SD222
Color
VGA
Picture
Media player
Input Select
Menu
Move
OK
Exit
4.Menu
Adjusts the system configuration.
SD222
Color
OSD Setup
Picture
Information
Input Select
Language
Menu
Key Lock
English
All Reset
Move
OK
Exit
•
OSD Setup:To adjust the OSD Timeout, DDC/CI, Transparency, OSD
Rotation, and Power indicator of the display.
•
Information: To show the information of the display.
•
Language: To select OSD language. The selections are: English, French,
German, Spanish, Italian, Dutch, Russian, Traditional Chinese, Simplified
Chinese, Japanese, Persian, Thai, Indonesian, Poland, Turkey, Portugal,
Czech, Croatia, Hungary, Romania, and Korean.
•
Key Lock: To disable all function keys. Long press the MENU button for
over five seconds to active or cancel the key lock.
•
All Reset: Selecting “Yes” to revert all settings back to the factory default
values.
ASUS LCD Monitor SD222 Series
3-3
3.2
Specifications
Model
SD222-YA
Panel Size
21.5” (54.61 cm)
Max. Resolution
1920 x 1080
Brightness (Typ.)
250cd/m2
Intrisinc Contrast Ratio (Typ.)
Viewing Angle (CR≤10)
Display Colors
Response Time (Typ.)
D-Sub input
Media player input
Power ON Consumption
Speaker
Earphone
1000:1
178°(V); 178°(H)
16.7 M
5ms (G to Gσ)
Yes
Yes
40 W
Yes
Yes
Power saving mode
< 0.5 W
Power off mode
< 0.5 W
Tilt
Mounting Interface
Phys. Dimension (WxHxD)
Box Dimension (WxHxD)
-5° to +23°
100mm x 100mm
517.8 x 385.2 x 200 mm
570 x 109 x 392 mm
Net Weight (Esti.)
3.8 kg
Gross Weight (Esti.)
5.1 kg
Voltage Rating
AC 100~240V(Extemal)
*Specifications are subject to change without notice.
3-4
Chapter 3: General Instruction
3.3
Get start with media player
3.3.1 Specification summary
Supported video formats
MPEG1, MPEG2, MPEG4, VC-1, H.264
Supported video file
extension
TRP, MP4, MOV, XVID, AVI, ASF, WMV, MKV, RM,
RMVB 720p, FLV, TS, MTS, M2TS, DAT, MPG, VOB,
ISO, IFO, M1V, M2V, M4V
Supported audio formats
MP3, WAV, OGG, FLAC, AIFF, TAG ID3
Supported image formats
JPEG, BMP, PNG, GIF, TIFF
Supported subtitle formats
SRT, SUB, SMI, SSA, TXT
1 x SD card reader(SDXC (NTFS & FAT32))
I/O ports
3.3.2
USB2.0 Host Type-A
System requirement
1.
Storage device (USB flash drive)
2.
Memory card (SDXC (NTFS and FAT32))
3.3.3
Getting to know the media player
Item
I/O
1
SD/MMC
2
USB 2.0 port
Description
Insert the SD/MMC card into this slot. (support up SDXC
(NTFS and FAT32))
Insert a USB 2.0 device into this port.
3
Reset Button
Press this button to reset to factory default settings.
1
2
3
ASUS LCD Monitor SD222 Series
3-5
3.3.4
Remote controller
Use the remote controller to browse through menus and select the media
file to play, review or listen.
2
1
3
5
4
6
7
9
8
11
T
10
13
15
14
17
16
18
19
21
20
3.3.5
3-6
12
1
Power On/
Off
Turn the media player on or off.
2
Set Up
Press to set up.
3
Source
press to select input source.
4
Repeat
press to repeat.
6
Return
Press to return to previous
Press the up/down and left/right
keys to move through the main
5,7,8, Navigation / menu in the home screen and
menu bar in a submenu.
OK
9,11
Press the left key to edit the
selected file on return, rename and
delete.
10
Guide
Press to view the guide menu.
12
Subtitle
Press to select the supported
subtitle.
13
Volume
down
Decrease the volume.
14
Mute
Press to disable audio input.
15
Volume up
Increase the volume.
16
Rewind
Press to rewind the playback.
17
Play/Pause Toggle between play and pause.
18
Forward
Press to forward the playback.
19
Previous
Return to the previous media file.
20
Stop
Press to stop the playback.
21
Next
Go to next media file.
Getting your media player ready
1.
Turn on your display.
2.
Switch input select to "Media player"
Chapter 3: General Instruction
3.4
Using the media player
3.4.1
Main Menu
The main menu includes movie, music, photo, all media and set up.
**All media allows you to view all media files in your storage.
3.4.2 Configuring the media player setting
1.
Press up/down key to navigate set up.
2.
Press left/right key to navigate through Video, photo and system.
3.
Press up/down key to navigate to the item you want to configure.
4.
Press left/right to change different category.
5.
Press OK to save.
3.4.3
Playing a movie
1.
Press up/down key and navigate to movie in the home screen.
2.
Use up/down key to select your movie file and press OK.
3.4.4
Playing a music
1.
Press up/down key and navigate to music in the main screen.
2.
Using up/down key to select your music file and press OK.
3.4.5 Configuring the audio playback settings
The audio playback setting menu allows you to configure repeat
Press repeat to select playback options: Repeat off, Repeat on, Repeat All.
Press OK to confirm selection.
**Create a file named “repeatfile”, media player will detect and auto play
the file(s).
3.4.6
Viewing photos
1.
Press up/down key to navigate photos in the home screen.
2.
Press up/down key to select the photo.
3.
Press OK to browse the photos.
4.
Press play, pause and stop to view, pause and end the photos in
slideshow.
ASUS LCD Monitor SD222 Series
3-7
3.4.7
1.
Select Music and play music files.
2.
Press return key and return to main menu and go to photo to start
photo slide show.
3.4.8 3-8
Setting background music for the slide show
Renaming files/folders
1.
Select the files or folders you would like to rename from any of these
Sources: USB and card reader.
2.
Press edit key and select rename.
3.
Use the navigation keys to move through the virtual keyboard to
rename.
4.
Press Enter on the virtual keyboard to confirm the new file or folder
name.
Chapter 3: General Instruction
3.5
Trouble shooting (FAQ)
Problem
Power LED is not ON
Possible Solution
• Press the button to check if the monitor is in the
ON mode.
• Check if the power cord is properly connected to
the monitor and the power outlet.
• Check if the monitor and the computer are in the
ON mode.
• Make sure the signal cable is properly connected
the monitor and the computer.
The power LED lights amber and
• Inspect the signal cable and make sure none of the
there is no screen image
pins are bent.
• Connect the computer with another available
monitor to check if the computer is properly
working.
Screen image is too light or dark
• Adjust the Contrast and Brightness settings via
OSD.
Screen image is not centered or
sized properly
• Press the
button for two seconds to
automatically adjust the image.
• Adjust the H-Position or V-Position settings via
OSD.
• Make sure the signal cable is properly connected to
Screen image bounces or a wave
the monitor and the computer.
pattern is present in the image
• Move electrical devices that may cause electrical
interference.
Screen image has color defects
(white does not look white)
• Inspect the signal cable and make sure that none of
the pins are bent.
• Perform Reset via OSD.
• Adjust the R/G/B color settings or select the Color
Temperature via OSD.
Screen image is blurry or fuzzy
• Press the
button for two seconds to
automatically adjust the image (for VGA mode
only).
• Adjust the Phase and Clock settings via OSD.
No sound or sound is low
• Make sure the audio cable is properly connected
to the display
• Adjust the volume settings of both your display and
computer.
• Make sure the computer sound card driver is
properly installed and activated.
ASUS LCD Monitor SD222 Series
3-9
Problem
Display
I cannot find any of
my music, move or
photo files.
• Ensure that your media server(ex, USB device)
is properly placed in the slot
• Ensure the files are supported file formats and
are not damaged.
Certain files cannot
be played on the
media player.
• The media player may not support video or
audio format used in the file..
• Please refer specifications summary in chapter 1.
How do I play entire
list of video, music
and photo?
• When selecting a video, music or photo to play,
press the OK button on the remote control
plays just the selected file while pressing PLAY/
PAUSE key to play the entire list of files..
How do I get the
subtitle to play?
• Media player detects and displays the movie
subtitle. Go to Set up>System>subtitle
decoding
I cannot find any of
my music, movie or
photofiles.
• Ensure that your USB storage device is not in
standby mode.
• Ensure that the fiels are supported file formats
and are not damaged.
The media player does
not recognize my USB
storage device.
• Your USB storage device may not be detected
because of problems with the USD hardware.
Try to re-plug the USB storage device to the
USB port again or use another USB storage
device.
The media player
remote control is not
working.
• Ensure that the battery is properly inserted.
• The battery may already be drained out.
Replace the battery with a new one.
• Ensure that the path between the remote
control and the media player is not blocked.
Firmware
Updates
How do I update my
firmware?
• Download updated firmware on ASUS website
and go to Setup>Firmware>USB upgrade to
perform the firmware upgrade progress.
• If you are still unable to update firmware, reset
the system and perform the updating process
again.
• If the Media player is shut down or powered off
during the software installation, the update will
fail and please attempt again.
Operation/
Function
failure
An operation/ function
failed on my Media
player, what can I do?
• Using a pointed object, press the reset button
located at the side of the display.
• if you still encounter the same problem, please
contact the ASUS technical support.
Additional
information
ASUS support site.
• Download the latest firmwares, drivers and
utilities from ASUS support site at http://support.
asus.com
Audio
USB storage
device
Remote
Control
3-10
Possible Solution
Chapter 3: General Instruction
3.6
Supported Timing List
VESA / IBM Modes Support timing (D-SUB inputs)
Resolution
640 x 350
640 x 480
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
800 x 600
848 x 480
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 800
1280 x 960
1280 x 1024
1280 x 1024
1366 x 768
1440 x 900
1680 x 1050
1680 x 1050
1920 x 1080
1920 x 1080
Refresh Rate
70Hz
60Hz
67Hz
75Hz
70Hz
56Hz
60Hz
72Hz
75Hz
60Hz
60Hz
70Hz
75Hz
75Hz
60Hz
60Hz
60Hz
60Hz
75Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
Horizontal Frequency
31.469KHz
31.469KHz
35KHz
37.5KHz
31.469KHz
35.156KHz
37.879KHz
48.077KHz
46.875KHz
31.02KHz
48.363KHz
56.476KHz
60.023KHz
67.5KHz
44.772KHz
49.702KHz
60KHz
63.981KHz
79.976KHz
47.712KHz
55.935KHz
65.29KHz
64.674KHz
67.5KHz
66.587KHz
* The modes not listed in the above tables may not be supported. For an optimal resolution, we
recommend that you choose a mode listed in the above table.
ASUS LCD Monitor SD222 Series
3-11
Download PDF

advertising