BIOS UPDATE 1.10A FOR ADVENT 4211 AND 4489 NETBOOKS

BIOS UPDATE 1.10A FOR ADVENT 4211 AND 4489 NETBOOKS
BIOS UPDATE 1.10A FOR ADVENT
4211 AND 4489 NETBOOKS
Rating
3out
of 5
10414
Views
The BIOS update 1.10A for the Advent 4211 & 4489 Netbook is now available to improve a small number
of performance and functionality issues. This supersedes the previous release, so it is recommended that
you install this update.
It should take
under 30 mins
2
Article
Ease
WHAT YOU'LL NEED
Internet
connection
The Knowhow
This BIOS update is for the following models: Advent 4211, 4211B, 4211C and 4489. Do not attempt to
install it if you have a different make or model.
The update and how to install it can be found at
http://drivers.knowhow.com/Advent_4211_BIOS_10A(2).zip
IMPORTANT: It is vital to follow the correct steps when updating your BIOS; not doing so can cause
serious issues that could stop your computer working.
Note: Please make sure your netbook is connected to mains power with the battery pack removed before
beginning the BIOS update. Disconnect all other devices from the computer.
Step 1: Checking your power button mode
By default, your power button is set to Shut Down your Advent Netbook. If you have altered this setting
please change it back using the following method:
Click Start
Open the Control Panel
Select Performance and Maintenance
Choose Power Options
From the Power Options window, select Advanced
Under Power buttons check the option When I press my power button on my computer is set to
Shut down
Step 2: Downloading and extracting the Winflash tool
Note: To prevent interruption, your computer's keyboard and touchpad will be disabled once the BIOS
flash begins.
1. Click to download the zip file from this link: http://drivers.knowhow.com/Advent_4211_BIOS_10A(2).zip
2. Select a destination to save the file, such as your Desktop folder
3. Once downloaded, right-click on the file called Advent_4211_BIOS_10A.zip and select the option to
Extract All
4. Extract the file Advent_4211_BIOS_10A.zip to a folder on the hard drive by clicking Browse (shown
below). For example, your Desktop folder
5. You will now have a subfolder called "Advent_4211_BIOS_10A" on your Desktop containing the update
files. Double-click on this folder to open it
6. From Advent_4211_BIOS_10A folder, double-click on the file RunFlash (depending on your folder
settings, it may appear as RunFlash.bat). The following message will appear
7. Read the warning and press ENTER to continue with the BIOS flash or Ctrl+C to abort
8. The BIOS Flash utility will now write the update to your computer's BIOS. This may take several
minutes. Please do not power off your computer until the update is complete
9. When the update is complete, the black window will disappear. Press the power button once to turn off
your notebook computer
10. Remove the power lead from the Netbook. Wait 10 seconds then reconnect the battery pack and power
lead
11. When you power up your computer, it will have applied the update and your keyboard and touchpad will
be back to normal
Note: If you are still having problems with your keyboard or touchpad, power down the unit and removing
the power lead and battery pack. Wait 10 seconds then reconnect the battery pack and power lead.
BIOS update details:
Fixes the issues of the Netbook turning off during the BIOS splash screen if the power button is held
down for more than 2 seconds.
Fixes the issue of Windows Media Player visualisations failing to load when playing MP3s on mains
power.
Improves the detection of USB devices.
Add skip onboard memory function.
Update CPU Atom N270 microcode.
Modify battery Name (" ") & Manufacturer (" ")
Update EC file
Fixed sometimes system time will roll back to 2005/01/01
Fix keyboard function about "Page Up", "Page Down", "Home" and "End" keys
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising