SoundView Outdoor Camera

SoundView Outdoor Camera
Quick Start Guide
EN
At a Glance
Get Started in Four Easy Steps
Thank you for choosing the SwannOne™ SoundView Outdoor Camera. Please take a
moment to familiarize yourself with key areas of the camera.
Infrared LEDs
for night vision
1
2
3
4
Power Camera
Register Camera
Sunshield
for protecting
lens against
direct sunlight
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1)This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
SwannOne Warranty
Your SwannOne products are backed by a full 12 month guarantee from the date of purchase. In the
unlikely event of anything going wrong, you can have confidence that your purchase is protected.
Refer to swannone.com for terms and conditions.
Reset Button
Light Sensor for
night detection
SoundView
Outdoor Camera
Adjustable Knob
for orientating
camera view
Read me first
(To reset camera, unplug
power, then depress
button while reconnecting
power. Release button
after 10 seconds.)
Microphone
Antenna Connector
Attach
Antenna
Connect
Ethernet Cable
Questions? Get more information regarding the setup and use of your
SwannOne products on the web at swannone.com, or simply email us at
support@swannone.com.
www.swannone.com
© Swann Communications 2015
QHSVC02K260914E
1 Attach Antenna
Screw the Wi-Fi antenna onto the antenna connector. For best
reception, leave the antenna in a vertical position.
2 Connect Ethernet Cable
3 Power Camera
Connect the camera directly to your broadband router using the
included Ethernet cable.
4 Register Camera
Plug the camera into a wall outlet using the included power adapter.
Before you can register the camera, you will need to create a SwannOne
account. Your SwannOne account is what you use to control and manage all
your SwannOne devices and services from anywhere.
Power Adapter
(Your adapter may look
different, depending on
your location)
Go to home.swannone.com from your PC, Mac, smartphone or tablet, and
sign up for a SwannOne account.
Power
Connector
Installing the Camera
Log in to your new SwannOne account at home.
swannone.com and then follow the on-screen
instructions to add the camera to your SwannOne
account.
Ethernet Cable
Antenna Connector
Ethernet Port
Wi-Fi Antenna
Broadband Router
The Ethernet cable is only required for initial setup. Configure the camera to
connect to your Wi-Fi network directly during registration, then go wireless.
Creating a SwannOne Account
Broadband Router
Once registration is complete, stay connected
to your SwannOne camera wherever* you are by
downloading the SwannOne app on your smartphone
from the Apple App Store or Google Play.
* Internet connection required
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising