INSTRUCTION FOR SENSOR - Blue Line Innovations

INSTRUCTION FOR SENSOR - Blue Line Innovations
HOW TO
APPLIES TO
S E R I E S
POWERCOST™
MONITOR
POWERCOST™
DATA SENSOR
Change batteries on
in-home display
Every so often you’ll need to change the batteries on your in-home
PowerCost Monitor™ display. Here’s how you do it.
CHANGE BATTERIES VIDEO: http://www.youtube.com/watch?v=mVzplMfwhiU
INSTRUCTION FOR SENSOR
1. Using a Slotted or Phillips head screwdriver, turn the
screw on the sensor battery door counter clockwise to
open the door. (Do not remove the sealing grease on
the battery door seal)
2. Replace the old batteries with new AA size batteries,
close the door and tighten the screw ‘snug’ but not
forced.
For best results in cold weather, use Lithium type AA
size batteries in the Sensor Unit at the meter.
RESET TIME AND DAY AFTER BATTERY CHANGE
1. Press and hold the PROG/SYNC button on top of the
display until you hear a ‘beep’ and you will see the
‘hour’ flashing.
2. Change the hour by using the up/down arrows on the
front of the in home display.
3. Press the PROG/SYNC button once to move to the
minutes.
4. Use the up/down arrows again to change the
minutes.
5. Press PROG/SYNC and select 12 or 24 hour time by
using the up/down arrows.
6. Press PROG/SYNC then change the day of the week
by using the to change the up/down arrows.
INSTRUCTION FOR DISPLAY
7. Press and hold the PROG/SYNC button until you hear
a ‘beep’.
1. Remove the battery door on the back of the display
and remove the old batteries.
2. Insert the new AA size batteries noting the correct
orientation as shown in the illustration. + & - Symbols
are embossed in the battery compartment to show
correct orientation.
3. Replace battery door. The Display will resume showing consumption within one minute. You will now have
to re-program the time and day.
DISPLAY REQUIRES
(2) AA BATTERIES
MORE INFO AT WWW.BLUELINEINNOVATIONS.COM
“HOW TO” VIDEOS AT YOUTUBE.COM/POWERCOSTMONITOR
*Please respect the environment and recycle your old
batteries accordingly.
BLUE LINE INNOVATIONS
REAL TIME ENERGY DATA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising