Reference - Lexus RES+

Reference - Lexus RES+
RES+
SMARTPHONE OPERATION
Reference
REFERENCE
- United States of America
Contains FCC ID: QIPAHS3-US
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
FCC WARNING: Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
- Canada
Contains IC: 7830A-AHS3US
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil
ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna
of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To
reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary
for successful communication.
Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour
l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique
à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que
la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à
l’établissement d’une communication satisfaisante.
This radio transmitter 7830A-AHS3US has been approved by Industry Canada to operate
with the antenna types listed below with the maximum permissible gain and required antenna
impedance for each antenna type indicated. Antenna types not included in this list, having a gain
greater than the maximum gain indicated for that type, are strictly prohibited for use with this
device. The antenna type approved for the transmitter 7830A-AHS3US is: a dedicated film
antenna with 2dBi of maximum gain and 50 ohms of impedance.
Le présent émetteur radio 7830A-AHS3US a été approuvé par Industrie Canada pour
fonctionner avec les types d’antenne énumérés ci-dessous et ayant un gain admissible maximal
et l’impédance requise pour chaque type d’antenne. Les types d’antenne non inclus dans cette
liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour
l’exploitation de l’émetteur.
Le type d’antenne approuvé pour le 7830A-AHS3US émetteur est: une antenne film dédié à
2dBi de gain maximum et de 50 ohms d’impédance.
RES+
SMARTPHONE OPERATION
Usage Precautions
USAGE PRECAUTIONS
Warning
NOT following the instructions below could result in serious injury,
death, and/or damage to the vehicle.
• NEVER remotely start the engine if you are unaware of the circumstances surrounding the
vehicle as it may cause a life threatening situation for those located in the vehicle’s vicinity.
• DO NOT remotely start the engine if the vehicle is in an enclosed area (such as an
unventilated garage/parking lot) where too much exhaust may accumulate and create a
hazardous environment with the potential for Carbon monoxide (CO) poisoning.
• DO NOT remotely start the engine if children or pets are present in or near the vehicle. It
can lead to serious injury, or death.
• NEVER use product, or product packaging for purposes other than originally intended.
Doing so could result in damage to the unit, fire, or injury/death.
• DO NOT walk while using the CarFinder function of RES+. Always confirm your
surroundings first to avoid safety hazards.
• DO NOT remotely start the engine when it is near flammable substances and/or has a car
cover on. The exhaust pipe and emissions can create a hazardous environment which can
lead to serious injury or death.
Caution
NOT following the instructions below could result in damage to the
vehicle, or the product.
• If the Check Engine Light has come on, DO NOT operate RES+ to start the engine until
the vehicle has been checked by an authorized dealer technician.
• NEVER attempt to disassemble, alter, or modify the product. An accident, injury, fire, or
damage to the product may result.
• ALWAYS shut off mechanical components such as the windshield wipers after parking. If
left on, they may be damaged after remotely starting your vehicle.
USAGE PRECAUTIONS
General Information
• All smartphone(s) authorized by the owner have access to the vehicle’s location as part of the
CarFinder functionality.
• RES+ should only be used by licensed drivers.
• Laws in some communities may require that the vehicle be within view of anyone using RES+.
In some states, use of RES+ may violate state or local laws.
Before using RES+, check your state and local laws.
• RES+ is for vehicles with automatic transmissions only. Do not use it with manual transmission
vehicles.
• RES+ should be installed or repaired by an authorized dealer technician.
• This product uses a mobile phone communications network to operate the engine start/stop
and door lock/unlock functions. Consequently, the time taken to perform the functions and
for current information to be refreshed, is influenced by the signal strength at that location and
time.
• CarFinder information and vehicle location may vary slightly depending on GPS signal
strength, and location.
• RES+ is designed to work at temperatures above -22° F (-30° C). This specification is related
to the RES+ operation, but is dependant on the vehicle's operating temperature range which
may be different.
• RES+ is designed for remote operation. A key FOB is still necessary to drive the vehicle.
• Contents subject to change without notice.
• All features may not be applicable to all vehicle models.
• The FAQ and Troubleshooting Guide can be found at www.lexusresplus.com.
RES+
SMARTPHONE OPERATION
Introduction
INTRODUCTION
Thank you for purchasing this Genuine Lexus accessory.
RES+ uses a smartphone application to remotely access various vehicle functions
and features listed below. The use of this application requires installation of the RES+
accessory in your vehicle and an annual subscription. Please note that the subscription is
complimentary for the first year to first time owners of the RES+ accessory.
FEATURES
• Remote Engine Start
Start your vehicle’s engine from your smartphone. If you have preset your
Heating/Cooling System to your desired temperature the RES+ will assist you in
obtaining a comfortable cabin upon entry. As an added convenience, this feature
works with the defroster (when preset) to help clear up the windshield during cold
weather.
The RES+ is designed to shut the engine off when it detects any attempt to enter
or move the vehicle after a remote engine start.
• Lock/unlock doors
Lock and unlock your vehicle’s doors from your smartphone.
• CarFinder
Use the CarFinder feature to find the general location of your vehicle by using
the camera on your smartphone or switch to map view to help find your vehicle
location on a map by tapping the map button on the CarFinder screen.
• Check the following vehicle information:
- Exterior temperature at location of vehicle.
- Engine status - ON/OFF
- Door(s) status - LOCKED/UNLOCKED
CONTRACT INFORMATION
• Account registration for use of this service can be done by any one person, usually the
owner or someone authorized by the owner.
• Complete the Registration Process immediately after RES+ has been installed in the
vehicle by visiting http://www.lexusdrivers.com
• Please refer to the section RES+ QUICK SETUP GUIDE for web registration
instructions.
RES+
SMARTPHONE OPERATION
RES+ Quick Setup Guide
OPERATION
RES+ QUICK SETUP GUIDE
It is necessary to complete the account registration procedure and download the smartphone application
software by following the steps in the same order mentioned below.
Web Registration
Do you have a Lexus Drivers Account?
Yes
1
No
1. Log in to Lexus Drivers.
(http://www.lexusdrivers.com)
1. Go to the following URL on the
Internet and Register a new account.
(http://www.lexusdrivers.com)
2. Click RES+ Icon.
2. Click RES+ Icon.
3. Click on the register button.
3. Click on the register button.
RES+ Registration
1. After you have clicked “REGISTER”, you will be prompted to enter additional
information and complete the account registration.
2
Enter the following information in accordance with the screen instructions:
•
Account information (account owner)/vehicle information (VIN) RES+ ECU Serial
Number.
•
Payment method (for annual subscription renewal only).
•
Add smartphone(s) (max 4 per vehicle)
– Warning: Each added smartphone can locate your vehicle through
CarFinder.
OPERATION
Smartphone application download
Refer to http://www.lexusdrivers.com to determine if your smartphone and vehicle are compatible.
RES+ application software download
1
1. Search RES+ and download the application from your smartphone app store.
•
iPhone™ - Apple™ App Store
•
Android™ - Google Play™
Smartphone settings
1. Run the RES+ application on your smartphone.
2. Log in to RES+ with your “username” and “password” provided by the owner.
2
NOTE: By setting “Remember my username” to “ON”, login information will be
remembered for every subsequent login.
[iPhone only]
•
Refer to the owner’s manual on the website prior to using the CarFinder
function.
•
Refer to the iPhone User Guide for details on iPhone operation.
Complete
RES+
SMARTPHONE OPERATION
Operating Conditions
OPERATION
OPERATING CONDITIONS
The engine will NOT remotely start if one of the following conditions is detected.
Door(s) and/or hatch is open.
Brake pedal is being pressed.
Hood is open.
Vehicle’s transmission is not in park (P).
Ignition is ON.
The remotely started engine will shut off if one of the following inputs is detected.
Door(s) and/or hatch is opened.
Brake pedal is pressed.
Hood is opened.
Vehicle’s transmission is shifted
out of park (P).
Ignition is turned ON.
The security alarm is triggered.*
Door is unlocked by Smart key,
manual key, or key fob.
If the vehicle’s engine has been running for
10 minutes after being remotely started.**
* The engine will continue to run if the panic alarm is activated.
** The vehicle can be restarted remotely for a total of 20 minutes. After 20 minutes of total
run-time the Vehicle must be manually restarted to reset the run-time.
RES+
SMARTPHONE OPERATION
Logging In
OPERATION
LOGGING IN
[For iPhone]
1. Start the RES+ appli- cation.
4. Tap to select Login
Action to perform.
2. Enter your username and password.
3.Tap “Login Action”
to change login action.*
5. Tap “Login”.
.
NOTE:
• * “Login Action” gives you the option to select a specific RES+ function to perform
while logging in to the RES+ application.
• If your username and password are entered incorrectly 5 times, your account will be
locked for a period of time.
• By setting "Remember my username", the application will store your username for later
usage.
• If you forgot your username or password, tap the "Forgot username or password?" link
and follow the on-screen instructions.
OPERATION
[For Android]
1. Start the RES+ appli- cation.
4. Tap to select Login
Action to perform.
2. Enter your username and password.
5. Tap “Login”.
3.Tap “Login Action”
to change login action.*
NOTE:
• * “Login Action” gives you the option to select a specific RES+ function to perform
while logging in to the RES+ application.
• If your username and password are entered incorrectly 5 times, your account will be
locked for a period of time.
• By setting "Remember my username", the application will store your username for later
usage.
• If you forgot your username or password, tap the "Forgot username or password?" link
and follow the on-screen instructions.
RES+
SMARTPHONE OPERATION
Logging Out
OPERATION
LOGGING OUT
[For iPhone]
1. Tap “Setting”.
2. Scroll down and tap
“Logout”.
2. Scroll down and tap
“Logout”.
[For Android]
1. Tap “Setting”.
NOTE: The application will automatically log you out after a period of inactivity.
RES+
SMARTPHONE OPERATION
Home Screen Contents
OPERATION
HOME SCREEN CONTENTS
[For iPhone]
[For Android]
1
2
3
4
5
1
2
3
4
5
DISPLAY
......Vehicle nickname
......External air temperature – the current temperature in the vicinity of the vehicle.
NOTE: “NO GPS” is displayed when the vehicle does not have GSM reception and/
or GPS reception.
......Engine status
......Time remaining until the engine stops
......Door lock status
BUTTONS
.......HOME screen
.......Remote Engine Starter
.......Door Lock
.......CarFinder
.......Setting screen
.......Refreshes vehicle information on the Home Screen
NOTE: The vehicle status information does not update automatically. Data older than 3 minutes will be replaced with “–” and will need to be refreshed by tapping on the Refresh button.
RES+
SMARTPHONE OPERATION
Settings
OPERATION
SETTINGS
DISPLAY AND BUTTONS
[For iPhone]
1. Tap “Setting”.
5
1
6
2
7
3
8
4
10
9
Scroll
down
[For Android]
1. Tap “Setting”.
1
6
2
7
3
8
4
5
9
10
Scroll
down
......A/C Setting
NOTE:
• The climate control cannot be changed after starting the engine.
• Last ...The vehicle's climate control will resume functioning at the same setting it
was, when the vehicle was turned off.
• Auto ...The vehicle's climate control will operate at its default temperature setting.
(75F for RX, may vary for other models)
......Temperature unit
......Distance unit
......Access the online owner's manual (this document)
......Access the online Troubleshooting guide
......Call the Lexus Customer Assistance Center
......Access the web portal to contact the Lexus Customer Assistance Center via email
......Application version
9 ......Access the online End User License Agreement (EULA)
......Privacy policy
RES+
SMARTPHONE OPERATION
Engine Start & Stop
OPERATION
ENGINE START
NOTE: When using RES+ data usage fees may apply. Confirm data usage fees before
using this service.
[For iPhone]
1. Tap “Start”.
2. Tap “START”.
3. Enter your PIN (4 digit).
The engine starts.
2. Tap “START”.
3. Enter your PIN (4 digit).
The engine starts.
[For Android]
1. Tap “Start”.
OPERATION
ENGINE STOP
[For iPhone]
1. Tap “Start”.
2. Tap “STOP”.
The engine shuts off.
[For Android]
1. Tap “Start”.
2. Tap “STOP”.
The engine shuts off.
OPERATION
NOTE:
• Vehicles remotely started with the RES+ can idle for a total of 20 minutes, however
automatic engine shutdown occurs after 10 minutes of run-time. You can always restart
the vehicle after this initial shutdown. Once the total run-time of 20 minutes is reached
the vehicle must be manually started in order to reset the RES+. If vehicle is started
manually within the 20 minute window, the run time will be reset.
• For security, if the vehicle's doors are unlocked, they will be locked before the engine is
remotely started by the smartphone application.
• You will be automatically logged out if the PIN number is entered incorrectly 5 times.
• If you forgot your PIN number, tap the "Forgot PIN number?" button and follow the onscreen instructions.
• After a successful remote engine start or stop, the application will be redirected to the
Home screen.
RES+
SMARTPHONE OPERATION
Door Unlock & Lock
OPERATION
DOOR UNLOCK
NOTE: This function may not be applicable for all models.
[For iPhone]
1. Tap “Lock”.
2. Tap “UNLOCK”.
3. Enter your PIN (4 digit).
The doors will unlock.
2. Tap “UNLOCK”.
3. Enter your PIN (4 digit).
The doors will unlock.
[For Android]
1. Tap “Lock”.
NOTE:
• You will be automatically logged out if the PIN number is entered incorrectly 5 times.
• If you forgot your PIN number, tap the "Forgot PIN number?" button and follow the
on-screen instructions.
• After a successful remote door unlock, the application will be redirected to the Home
screen.
• The door unlock function cannot be performed while the engine is running.
• If the doors have not been opened for 30 seconds after using the remote door unlock
function, the doors will automatically lock.
OPERATION
DOOR LOCK
[For iPhone]
1. Tap “Lock”.
2. Tap “LOCK” to lock the doors.
[For Android]
1. Tap “Lock”.
2. Tap “LOCK” to lock the doors.
NOTE:
• After a successful remote door lock, the application will be redirected to the Home
screen.
• The door lock function cannot be performed while the engine is running.
RES+
SMARTPHONE OPERATION
CarFinder
OPERATION
CAR FINDER
NOTE:
• If the location of your vehicle has poor GPS signal strength, you may not be able to
use the CarFinder function.
• CarFinder can be used in horizontal and portrait orientations.
• You will be unable to use the CarFinder function if the iPhone/Android location
service setting is OFF.
[For iPhone]
1. Tap “CarFinder”.
2. CarFinder function starts.
[For Android]
1. Tap “CarFinder”.
2. CarFinder function starts.
OPERATION
DISPLAY
[For iPhone]
1
2
3
4
5
6
[For Android]
1
2
3
4
5
6
......Date and time at which car information was acquired
......Distance remaining to car
......GPS information
NOTE: When using CarFinder to locate your vehicle take note of the GPS accuracy
based on your vehicles location and the GPS signal for that location.
......Car location
NOTE: The size of the vehicle pin will vary depending on the distance from your current
location to your vehicle.
......Direction from current location to car location
NOTE: Use the directional arrow as a reference to find the location of your vehicle.
......Switch to map view
OPERATION
CAR FINDER MAP
[For iPhone]
1. Tap “CarFinder”.
2. Tap “Map” icon.
3. Map function starts
2. Tap “Map” icon.
3. Map function starts
[For Android]
1. Tap “CarFinder”.
OPERATION
DISPLAY
[For iPhone]
2
3
4
5
6
1
7
[For Android]
5
1
......Switch to map mode
NOTE: [For Android] Opens external maps app.
......Map type mode change
NOTE: The map type can be changed.
[Standard] Standard map view with street names and POIs.
[Satellite] Satellite view.
[Hybrid] Combines satellite view with street names.
......Map view mode change
NOTE: The map view can be changed between the 2D and 3D maps.
[2D] The map will always be viewed from above.
[3D] The map will be viewed at an angle from above or from the side.
......Switch to map view direction or orientation
NOTE: The map direction (orientation) can also be changed in the map.
[North up] Display the map with north always pointing up.
[Heading up] Display the map so that the direction you are moving is always pointing up.
......Car location
......Your current location
......Switch to CarFinder mode
RES+
SMARTPHONE OPERATION
Operation Priority Overview
OPERATION
OPERATION PRIORITY OVERVIEW
The following Table provides an overview of the operation priorities. This priority list was
designed to provide optimal safety and security.
If Engine is started by push button
If Engine is started by Key fob
(conventional RES)
Engine can be shut
off by push start
button
Engine can NOT
be shut off by key
fob
Engine can NOT
be shut off by
smartphone
Engine can be shut Engine can be shut
off by push start
off by key fob
button
Engine can NOT
be shut off by
smartphone
If Engine is started by smartphone 1 Engine can be shut Engine can be shut Engine can be shut
(User A)
off by push start
off by key fob
off by smartphone 1
button
(User A)
If Engine is started by smartphone 2
(User A)
Engine can be shut Engine can be shut
off by push start
off by key fob
button
Engine can NOT
be shut off by
smartphone 1
(User A)
Engine can NOT
be shut off by
smartphone 2
(User B)
Engine can be shut
off by smartphone 2
(User B)
RES+
SMARTPHONE OPERATION
RES+ Information
RES+ INFORMATION
HEATER / AIR CONDITIONER / DEFROSTER / DEFOGGER
SETTINGS
For your comfort and convenience, the vehicle’s air conditioning system controls can be preset
to operate the heater, air conditioner, and defroster/defogger at engine startup. The two tables
below contain the settings recommended for best results. Users should preset these before
exiting the vehicle. (Please see your vehicle’s owner’s manual for available settings.)
VEHICLES WITH AUTOMATIC AIR CONDITIONER
Auto Button A/C Button
Temperature
Selector
Windshield
Airflow
Button
Fan Speed
Selector
Heat
ON
OFF
User Settings
OFF
OFF
Cool
ON
ON
User Settings­
OFF
OFF
Defrost
OFF
ON
Max Setting
ON
HIGH
Defog
OFF
ON
Max Setting
ON
HIGH
NOTE: The RES+ may not activate the rear window defroster/defogger.
VEHICLES WITH MANUAL AIR CONDITIONER
A/C Button
Temperature
Selector
Airflow
Selector
Fan Speed
Selector
Heat
OFF
WARM
PANEL
HIGH
Cool
ON
COLD­
PANEL
HIGH
Defrost
ON
WARM
WINDSHIELD
HIGH
Defog
ON
WARM
WINDSHIELD
HIGH
NOTE: The RES+ may not activate the rear window defroster/defogger.
RES+ INFORMATION
VEHICLES WITH HEATED AND VENTILATED SEATS
For vehicles equipped with Heated and Ventilated front seats these features can also be
left on so that when the vehicle is remotely started these features will provide you with
additional comfort upon entering the vehicle.
RES+ RANGE
The RES+ has unlimited range to operate provided there is sufficient cellular reception for
both the Smartphone and Vehicle. The physical makeup of the surrounding environment
(hills, trees, buildings, etc.) may affect the RES+ performance.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising