jbl On TIME™ MIcrO
jbl On TIME Micro
™
AM/FM RADIO AND SPEAKER DOCK FOR iPod/iPhone
iPod/iPhone not included / iPod/iPhone non inclus
User Guide
English............................... 2
Français........................... 16
Deutsch........................... 30
Italiano............................. 44
Español............................ 58
Nederlands..................... 72
한 글................................ 86
Dansk............................. 100
Japanese....................... 114
中文............................... 128
Русский.......................... 142
Svenska......................... 156
Suomi............................. 170
Norsk.............................. 184
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles and the point where
they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table
specified by the manufacturer or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as
power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
2
JBL On Time MICRO USER GUIDE
15. Do not expose this apparatus to dripping or splashing and
ensure that no objects filled with liquids, such as vases, are
placed on the apparatus.
16. To completely disconnect this apparatus from the AC
mains, disconnect the power supply cord plug from the
AC receptacle.
17. The mains plug of the power supply cord shall remain
readily operable.
18. Do not expose batteries to excessive heat such as sunshine,
fire or the like.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the product.
WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
Important Note for All
Electronic Products:
Before inserting or unplugging audio cables from the source device’s
headphones or line-level output jacks, it is good practice to turn off the
device first. This will prolong the life of your unit, help protect your device
from static electricity and prevent potential damage.
English
FCC STATEMENT AND WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT UNDER FCC RULES.
IC Statement and Warning
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada
CAUTION
RISK OF ELECTRIC
SHOCK — DO NOT OPEN
THE LIGHTNING
FLASH AND
ARROWHEAD
WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU
TO DANGEROUS
VOLTAGE INSIDE
THE PRODUCT.
CAUTION: TO REDUCE
THE RISK OF SHOCK, DO
NOT REMOVE COVER. NO
USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
THE EXCLAMATION
POINT WITHIN
THE TRIANGLE IS
A WARNING SIGN
ALERTING YOU
TO IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
WARNING: TO PREVENT FIRE OR
ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
Important:
The appropriate adapter must be installed before
inserting your iPod/iPhone into the JBL® PRODUCT.
Make sure that the CONNECTOR FOR the iPod/iPhone is
properly aligned with the JBL PRODUCT’s connector
when installing your iPod/iPhone. Failure to do so
may cause permanent damage to the CONNECTOR FOR
the iPod/iPhone, rendering the iPod/iPhone inoperable.
www.jbl.com
3
jbl On TIME MICRO
™
The JBL On Time™ Micro high-performance loudspeaker dock and clock radio for iPod/iPhone will revolutionize the way you listen to your
radio, use your iPod/iPhone, and wake from a good night’s sleep.
The JBL On Time Micro system is a revolution in time travel. Imagine waking up to music on your favorite station or your iPod/iPhone,
with no more buzzer or bad radio reception. The compact time machine and sound center, when connected to your iPod/iPhone, MP3
player or other music source, produces clean, powerful sound while providing time-keeping, alarm and radio features.
The JBL On Time Micro loudspeaker dock has full ability to navigate your iPod via IR remote. Also, not only can you wake up to your
favorite radio station or song on your iPod/iPhone, but with the multiple alarm setting option, you can set up to seven different alarms for
“His” and “Hers,” at whatever day or frequency needed.
Evercharge topology
The JBL On Time Micro speaker dock charges your iPod/iPhone, even when the system is off. The system’s memory is maintained by a
backup battery. Even with the power out, it will provide the alarm function.
COE (Computer-Optimized Equalization)
The JBL On Time Micro system equalization is computer-optimized to provide a rich, complete soundstage.
OCT (Optimized Compression Topology)
The JBL On Time Micro radio and loudspeaker dock utilizes a proprietary compression technology to ensure clean, accurate sound at
high output levels.
DISPLAY
The large, backlit LCD enables easy viewing and menu navigation. Automatic dimming sets the correct brightness level in any
room environment.
4
JBL On Time MICRO USER GUIDE
English
Unpacking your JBL On Time™ MICRO
Carefully unpack your speaker system and identify all its components:
JBL On Time™ Micro
Apple Adapter
IR remote
Power supply
FM antenna
AM antenna
Battery Installation
Battery Installation
Quick setup instructions
• Place Apple adapter into the docking unit, if necessary. Then place your iPod/iPhone into the adapter.
• For backup memory, install three AAA batteries in the battery compartment underneath the unit.
• Connect the external AM antenna for better reception.
•Unwind the FM antenna and straighten the wire for the best reception.
• Plug the power adapter into the “DC In” jack and then plug the adapter into a wall outlet.
•If an additional audio source is used, connect the source to the “Aux In” jack (cable sold separately).
Aux In
BATTERY DISPOSAL
Alkaline batteries are considered nonhazardous.
Rechargeable batteries (i.e., nickel cadmium, nickel
metal-hydride, lithium and lithium-ion) are considered
hazardous household materials and may pose an
unnecessary health and safety risk. In the European
Union and other locations, it is illegal to dispose of any
battery with household trash. All batteries must be
disposed of in an environmentally sound manner. Contact
your local waste management officials for information
regarding the environmentally sound collection,
recycling and disposal of used batteries.
DC In
2
www.jbl.com
5
CONTROLS
Setting the Clock
1. Press Menu/Up Level at any screen to display Top Menu (may require repeated presses, depending on which menu state the unit
was previously in).
2. Use Up/Down arrows to highlight Clock. Press Enter to confirm.
3. Use Up/Down arrows to highlight 12-hour or 24-hour format. Press Enter to confirm.
4. Use Up/Down arrows to set Hour. Press Enter to confirm. Minute field becomes highlighted.
5. Use Up/Down arrows to set Minutes. Press Enter to confirm. AM/PM field becomes highlighted.
6. Use Up/Down arrows to set Day of Week. Press Enter to confirm. The clock is set!
ote: During clock-setting, if there is no user input for 2 seconds, display will return to the Now Playing screen. Press any one of the Enter, Up/Down arrows, or
N
Menu/Up Level to return to setting selection.
Base Unit Control
Navigation
Power
Select Up
Alarm
Source
Menu/Up Level
Preset
6
JBL On Time MICRO USER GUIDE
Enter
Select Down
English
Playing Music
1. Press Source button to select the source (iPod/iPhone, AM, FM, Aux).
2. Press “+” button to increase volume.
3. Press “–” button to decrease volume.
Languages/Region
1.
2.
3.
4.
Press the Menu/Up Level button until you reach the Top Menu screen.
Use Up/Down arrows to select Region and press Enter.
Use Up/Down arrows to select language. Press Enter.
Use Up/Down arrows to select radio band region type. Press Enter.
Power
Radio Tuning
Alarm
1. If AM or FM radio is already selected and playing, use Up/Down arrows to
tune frequency; hold either button and release to scan for the next station.
2. Otherwise, press Source until FM or AM is selected.
3. Tune to the desired frequency using Up/Down arrows; hold either button and
release to scan for the next station.
Source
Preset
Select Up
Menu/Up Level
Enter
Setting Presets
1. While listening to AM/FM radio, press and hold Preset for 2 seconds.
The Radio Preset screen will be displayed.
2. Use Up/Down arrows to select slot to store preset. Press Enter to confirm.
Preset is stored!
Select Down
To Select a Preset for Listening
1. Press Preset once at any screen to display the Preset list.
2. Use Up/Down arrows to highlight Preset. Press Enter to confirm. Preset station will begin playing!
www.jbl.com
7
CONTROLS (CONT.)
Alarm Setting†
1. P
ress Menu/Up Level at any screen to display Top Menu (may require repeated presses,
depending on which menu state the unit was previously in).
2. Use Up/Down arrows to highlight Alarm. Press Enter to confirm; or press Alarm to go directly to the Alarm menu.
3. Use Up/Down arrows to select an Alarm slot to edit. Press Enter to confirm. Hour field becomes highlighted.
4. Use Up/Down arrows to set Hour. Press Enter to confirm. Minute field becomes highlighted.
5. Use Up/Down arrows to set Minutes. Press Enter to confirm. AM/PM field becomes highlighted.
6. Use Up/Down arrows to set AM/PM. Press Enter to confirm.
7. Use Up/Down arrows to set Day of Week, Weekdays, Weekends, Everyday or One-Time. Press Enter to confirm.
8. Use Up/Down arrows to set Alarm source. Press Enter to confirm. Alarm is set!
N
ote: During alarm-setting, if there is no user input for 2 seconds, display will return to the Now Playing screen. Press any one of the
Enter, Up/Down arrows, or Menu/Up Level to return to setting selection.
† Use this same procedure to modify a previously set Alarm.
Power
Alarm
Source
To Enable/Disable a Set Alarm
1. P
ress Menu/Up Level at any screen to display the Top Menu (may require repeated presses,
depending on which menu state the unit was previously in).
2. Use Up/Down arrows to highlight Alarm. Press Enter to confirm;
or press Alarm to go directly to the Alarm menu.
3. Use Up/Down arrows to highlight Alarm. Press Alarm to enable/disable the alarm.
An icon will be displayed on the left when the alarm is enabled, and the alarm will sound at the set time.
Waking to the iPod/iPhone
1.
2.
3.
4.
Use the steps under Alarm Setting and choose “iPod” as the source.
On your iPod/iPhone, choose the song you would like to awaken to and press Play.
Put your iPod/iPhone to sleep by holding down the Play/Pause button (older iPod models may vary).
The JBL On Time Micro system can be put to sleep by pressing the Power button.
Preset
Select Up
Menu/Up Level
Enter
Select Down
Note: If you choose the last song on your iPod/iPhone, please place the iPod/iPhone in repeat mode, which will ensure that the iPod/iPhone will continue playing past
the last song.
8
JBL On Time MICRO USER GUIDE
English
Screen Contrast/Brightness
1.
2.
3.
4.
Press the Menu/Up Level button until you reach the Top Menu screen.
Use Up/Down arrows to select Display and press Enter.
Use Up/Down arrows to select Brightness or Contrast. Press Enter.
Adjust settings using Up/Down arrows.
Note: To set brightness to Auto, press the Down arrow until Auto is highlighted.
Sleep Timer
1.
2.
3.
4.
Press the Menu/Up Level button until you reach the Top Menu screen.
Use Up/Down arrows to select Sleep and press Enter.
Use Up/Down arrows to select minutes and press Enter.
The sleep timer is started and the unit will power off when the timer reaches zero.
Snooze Timer Set
1. Press and hold the Snooze button for 3 seconds until you reach the Set Snooze Timer screen.
2. Use Up/Down arrows to select minutes and press Enter.
3. Snooze feature will use this value the next time it is activated.
www.jbl.com
9
Remote Navigation
Button
Function
Turns main unit power on and off. Button is active in any menu state.
Preset the hot key. A single press brings up the preset screen from any menu. Repeated presses cycle through the preset list to the next
preset slot. Press and hold for 2 seconds when listening to the radio and the Now Playing screen is displayed, to store current radio station.
Volume Increase. Display changes to Volume screen. Increases volume level, turns Amps on if off, then increases volume. If in snooze
mode, cancels snooze mode and turns Amps on. Times out back to current menu.
Volume Decrease. If in snooze mode, no action. If not in snooze mode and Amps are on, displays changes to Volume screen and decreases
volume level. Times out back to current menu. Does not turn Amps on if off.
Enter or Selection Confirmation button. Confirms selection on any JBL On Time™ Micro settings screen. If Now Playing screen is displayed,
returns to last-used menu screen.
Scroll Up/Tune Up. Moves highlighted box up on any JBL On Time Micro menu setting screen. Increases digit value when setting Time
(hours and minutes) and Snooze Timer. In radio mode, manually increases tuning frequency; hold for Seek.
Scroll Down/Tune Down. Moves highlighted box down on any menu setting screen. Decreases digit value when setting Time (hours and
minutes) and Snooze Timer. In radio mode, manually decreases tuning frequency; hold for Seek.
Menu or Up Level button. If Now Playing screen is displayed, takes user to top-level menu screen. If in menu settings, steps up one level to
previous field or menu screen. Hold for 2 seconds to return to Now Playing screen.
Alarm hot key. Takes user to Alarms settings of menu tree. Button is active in any menu state. If alarm is sounding, turns alarm off. When
viewing alarms list, enables or disables selected alarm.
Snooze button and Snooze Timer setting hot key. If alarm is sounding, enables snooze mode. Press and hold for 2 seconds to enter Snooze
Timer setting screen.
Directly switches the JBL On Time Micro source to iPod/iPhone.
Sends Scroll Down command to iPod/iPhone navigation. Works in iPod/iPhone navigation only.
Sends Scroll Up command to iPod/iPhone navigation. Works in iPod/iPhone navigation only.
Cycles to next source. AM
FM
iPod/iPhone
AUX.
A single press starts sleep time countdown, using currently set timer. Press and hold for 2 seconds to enter Sleep Timer setting screen
(similar to base unit).
Next Track in iPod/iPhone navigation only. Does not affect JBL On Time Micro menu navigation or function.
Previous Track in iPod/iPhone navigation only. Does not affect JBL On Time Micro menu navigation or function.
Enter/Select in iPod/iPhone navigation only. Does not affect JBL On Time Micro menu navigation or function. Similar function to the center
button of the iPod/iPhone.
Menu/Up Level in iPod/iPhone navigation only. Does not affect JBL On Time Micro menu navigation or function. Similar function to the
Menu button of the iPod/iPhone.
Play/Pause/Mute button. When iPod/iPhone is the active source, a single press sends the Play/Pause command to the iPod/iPhone. When
AM, FM or AUX is the active source, a single press mutes audio/amp on the JBL On Time Micro system.
10
JBL On Time MICRO USER GUIDE
English
JBL On Time™ MICRO MENU TREE
Now Playing
(ON)
Clock
Now Playing
(Off)
Alarm
12H
24H
HR
HR
Min
Min
Display
Sleep
HOT KEY POINT
(on remote)
HOT KEY POINT
(on remote or base unit)
AL1-AL7
Region
Brightness
Contrast
Adjust
Adjust
set sleep timer:
15-30-60
Set Language:
English
Spanish
French
German
Italian
Dutch
Select Alarm
am/pm
Hr
set day
Press and hold for 2 sec at
any point in menu structure,
to return to now Playing
screen.
A Selection command
displays setting
confirmation and returns
state to Top Level Menu
screen.
Min
MO/TU/
WED/TH/FR/
SA/SU/WK/
ED/WE
AM
FM
iPod/
iPhone
Aux
Tone
A Selection command
displays setting
confirmation and returns
state to Top Level Menu
screen.
Enable/
Disable
A Selection command
returns state to display
menu screen.
A Selection command
displays setting
confirmation and returns
state to Top Level Menu
screen.
Set Radio Type:
U.S.
Europe
Japan
A Selection command
displays setting
confirmation and returns
state to Top Level Menu
screen.
www.jbl.com
11
JBL On Time™ MICRO MENU TREE (CONT.)
PRESET
SOURCE
HOT KEY POINT
(on remote or base unit)
SNOOZE
HOT KEY POINT
(on remote or base unit)
HOT KEY POINT
(hold button for 3 sec on base unit)
SNOOZE
Preset 1-10
Select and
begin
playing preset
station.
12
JBL On Time MICRO USER GUIDE
Press and hold Preset
button while listening to
radio to store current
station. Select slot 1-10 and
press enter to store.
set snooze
timer
AM
FM
iPod/
iPhone
Aux
A Selection command
displays setting
confirmation and returns
state to Top Level Menu
screen.
English
SPECIFICATIONStroubleshooting
JBL On Time™ MICRO
Frequency Response: 70Hz – 20kHz
Power Consumption: 30 Watts maximum
JBL On Time™ Micro Transducer: Phoenix SE
1-3/4" (45mm) x 2 (full range per channel)
SOUND QUALITY
Symptom
Possible Problem
No sound from the
JBL On Time™ Micro unit
Power: 2 x 6 Watts
Solution
Note
No power to the unit
Make sure the wall power outlet or power strip
has power. Make sure all switches for outlet/
power strip are on and that all switches for speaker
system are on.
Is the display on? If not,
power is not getting to
your JBL On Time Micro;
try the solutions shown.
Incorrect source selection
Make sure the correct source is selected; choose
FM radio as a source. Turn up the volume. Check
the system with a known good source, such as your
iPod/iPhone. Connect an Aux In cable (sold separately) to the headphone jack on your iPod/iPhone.
Bad reception from current location
Reposition your JBL On Time Micro unit until you
find better reception.
Interference
Check surrounding area for any possible
interference; wrap up any excess cables.
Input Impedance: >5k Ohms
Signal-to-Noise Ratio: >80dB
Input Sensitivity: 350mV RMS for rated power output
Power (USA/Canada): 120 Volts, 60Hz AC
No sound or weak signal from
the AM/FM radio
If you are still getting a weak signal
from AM broadcasts, connect the
external AM antenna to the AM
antenna jack.
Power (Europe/UK): 220 – 230 Volts, 50Hz or 60Hz AC
Power (Japan): 100 Volts, 50Hz or 60Hz AC
Power (Australia): 240 Volts, 50Hz or 60Hz AC
UL/CUL/CE-Approved
Sound comes from one
side/channel only
iPod/iPhone or audio cable is not seated
properly
Make sure the iPod/iPhone or Aux In cable is
seated all the way into the JBL On Time Micro unit.
Dimensions: 8" x 8" x 4-9/16"
(W x D x H) (203mm x 203mm x 116mm)
Distortion (static, crackling or
hissing sounds)
Noise may be caused by interference
from a monitor, cell phone or other
transmitting device
Turn monitor off to see whether noise is eliminated.
Move JBL On Time Micro unit’s cables farther away
from monitor.
JBL On Time Micro unit is being overdriven by an amplified audio source
Make sure the unit is connected to an appropriate
source device. Make sure all signal cables are
inserted snugly into receptacles.
Volume level may be too high
Check volume of source device; some devices
will distort the output signal if the volume is set to
maximum.
Too much bass or treble
Check the EQ setting on your iPod/
iPhone or source device
We recommend that the source device EQ be set
to Flat or Off.
JBL On Time Micro unit emits
a loud hum or buzzing noise
Aux In cable (if used) is not plugged
in properly
Check input cable connection.
Speaker system experiences
radio frequency interference
or picks up a radio station
Aux In cable (if used) may be picking
up interference
Wrap up excess input cable to make it as short
as possible.
Weight: 1.8 lb (0.8kg)
IMPORTANT:
Batteries for On Time Micro: Use only UM4/AAA/
LR03 alkaline-type nonrechargeable, quantity 3.
Battery for Remote Control: Use only CR2025,
quantity 1.
Purchase a ferrite clamp and attach it over the
input cable; a clamp can be purchased at your local
electronics store.
www.jbl.com
13
troubleshooting
CHARGING AND SYNCING
Symptom
Possible Problem
Solution
iPod/iPhone will not charge
Wrong adapter is used
Make sure correct adapter is used for your specific
iPod/iPhone model.
The iPod/iPhone is not making full
contact with the docking station
Make sure the iPod/iPhone is seated securely into
the docking station.
Note
CLOCK SET AND CLOCK MEMORY
14
Symptom
Possible Problem
Solution
Clock is not set to correct time
Incomplete setup
Be sure to follow the clock setting procedure
through, to the end. A confirmation screen will be
displayed when set completely.
JBL On Time Micro unit does
not retain memory settings
when there is a power outage,
or if the unit is unplugged
There are no batteries installed in
the unit
Make sure you install three AAA batteries in the
base of the JBL On Time Micro unit.
Batteries may be low
If you have installed three AAA batteries, replace
them, as they may be defective.
JBL On Time MICRO USER GUIDE
Note
JBL is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries.
JBL On Time is a trademark of Harman International Industries, Incorporated.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries. “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod
and has been certified by the developer to meet Apple performance standards. “Works with iPhone” means that an electronic accessory has been designed to connect specifically
to iPhone and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and
regulatory standards. iPhone is a trademark of Apple Inc.
JBL est une marque commerciale de Harman International Industries, Incorporated, déposée aux États-Unis et/ou dans d’autres pays.
JBL On Time est une marque commerciale de Harman International Industries, Incorporated.
iPod est une marque commerciale d'Apple Inc., déposées aux États-Unis et dans d’autres pays. « Made for iPod » signifie que le dispositif électronique a été spécialement conçu
pour se connecter à l’iPod et qu’il est certifié par le développeur comme conforme aux normes de performance Apple. « Works with iPhone » signifie que le dispositif électronique
a été spécialement conçu pour se connecter à l’iPhone et qu’il est certifié par le développeur comme conforme aux normes de performance Apple. Apple n’est pas responsable du
fonctionnement de ce dispositif ou de sa conformité avec les normes de sécurité ou réglementaires. IPhone est une marque déposée d'Apple Inc.
Harman Consumer Group, Inc.
8500 Balboa Boulevard, Northridge, CA 91329 USA
516.255.4525 (USA only)
www.jbl.com
© 2009 Harman International Industries, Incorporated. All rights reserved. Tous droits réservés.
Document Number: 950-0275-001 REV. A
www.jbl.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising