Camera accessories
Accessories
Accessories
ALFT-HDMI
Camera System
For displaying the welding process on an external monitor
The ALFT-HDMI camera system is specially
adapted to our laser systems.
• Delivers HD signals to the monitor
with integrated, adjustable cross-hair
B
A
• For installation below the
laser system’s microscope attachment
C
E
D
• Sensor resolution: 1280 × 1024 pixels
• For connecting to a monitor
that supports a resolution of
1920 x 1080 pixels and 60 Hz
• With optional HDMI recorder
to record the welding process
F
ALM
E
• Supply voltage:
For laser systems with a 24V connection
(e.g. ALM), the camera can be supplied
with voltage via the laser.
Otherwise voltage is supplied via
the included power plug.
Operation
After the laser system is switched on or the power
plug is inserted, the camera is ready to use.
The following display settings can be adjusted
with the arrow keys on the camera.
• Turn cross-hair on/off:
Press
and hold the key
• Change cross-hair color:
Press
and hold the key
• Turn automatic exposure on/off:
Press
and hold the key
• Set white balance:
Press
and hold the key
(readjusts the color display to the lighting)
• Move cross-hair:
Briefly press one of the four arrow keys
ALPHA LASER GmbH
Junkersstraße 16
D-82178 Puchheim
Tel +49 89 890237-0
info@alphalaser.de
www.alphalaser.de
ALFT-HDMI Camera System
Technical data
Dimensions (H x W x D)
46 x 80 x 112 mm
Weight
approx. 500 g (incl. accessories)
Scope of delivery
Connections
Installation
A
Camera with operating controls 8 (Item No. 600-1560A)
B
HDMI cable for monitor (Item No. 303-2111A)
C
Laser connection cable for supplying power via the laser
(Item No. 303-0662A)
D
Power plug for external power supply
(for laser systems without power connection)
(Item No. 201-0085A)
E
HDMI recorder, optional (Art-No. 909-1250A, see separate datasheet)
F
Monitor, optional (Art-No. 901-1808A)
2
USB connection for service purposes only
3
HDMI connection for connecting the monitor, with cable B
5
24V input
for connection to laser, if connection available, with cable C
(for power supply via laser)
6
5V input
for connection to power plug D
(for power supply via power plug)
7
24V outlet
for connecting future components
1
2
3
5 6 7
4
8
ÖÖ Loosen the attachment screws of the microscope attachment,
remove the microscope attachment upward from the laser system.
ÖÖ Remove the camera’s protection cap, set the camera on the laser system’s base,
attach the camera with the microscope attachment’s attachment screw.
ÖÖ Remove the camera’s protection cap, insert the microscope attachment into the camera base 1,
4
attach the microscope attachment with the attachment screw ().
ÖÖ Connect the camera to the monitor: HDMI cable B in HDMI connection 3 .
ÖÖ Supply the camera with power:
via laser: Cable C in 24V input 5 / via power plug: Power plug D in connection 6 .
ALPHA LASER GmbH
Junkersstraße 16
D-82178 Puchheim
Tel +49 89 890237-0
info@alphalaser.de
www.alphalaser.de
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising