Configuring Wired 802.1x Authentication on Windows Server 2012

Configuring Wired 802.1x Authentication on Windows Server 2012
Configuring Wired 802.1x Authentication on
Windows Server 2012
Johan Loos
johan@accessdenied.be
Version 1.0
Why 802.1x Authentication?
The purpose of this document is to guide you through the procedure how to enable 802.1x
authentication to add an additional level of security when client computers are connecting
to your local area network. Before a client computer has access to your network, the client
computer needs be authenticated. If authentication is successful, the client computer is
granted access. If authentication fails, the client computer has no or limited access. Clients
can be authenticated using a password or a certificate.
802.1x authentication offers visibility since all clients are identified and authenticated. Offers
security if the strongest authentication method is used and offers transparency because
there is no involvement of the end-user.
Without proper access to your network, malicious users can use your network to access
private data or launch attacks to servers or client computers on your network.
Example:
A consultant enters your company, plugs its computer into a socket wall, the client adapter
request an IP address from a DHCP server which is located on the local area network. The
client computers now have access to your network.
802.1x Authentication Overview
802.1x is an authentication framework to restrict unauthorized devices from connecting to
the local area network. The authentication server authenticates each client connected to a
switch port before the client can access any network resources.
Before the client can access network resources, only EAPOL traffic is allowed between the
switch port and the client. If the client gets finally authenticated, normal traffic can flow
through the switch port.
To protect your network, you have to use a proper authentication method:

Authentication requires that the user provides some valid credentials such as
username and password or a certificate stored on the client computer or smartcard.
Configuring Wired 802.1x Authentication on Windows Server 2012
2
Some components that you can use to protect the wired environment are:

One or more 802.1x capable switches which are compatible with RADIUS

Active Directory Domain Services for user and group management

Active Directory Certificate Services for certificate management

Network Policy Server to provide authentication, authorization and accounting
802.1x Components
Supplicant (workstation): Is a client that request access to the local area network and
respond to requests from the switch.
Authentication server (NPS Server): This server actually authenticates the client. The
authentication server validates the identity of the client and informs the switch if the client
is authorized to access the local area network. The authentication server is basically a
RADIUS server configured to support EAP authentication.
Authenticator (switch, wireless access point, wireless controller): Controls physical access
to the network based on the authentication status of the client. This device relays the
supplicant credentials to the authentication server.
EAP Protocol
EAPOL works at Layer 2 to authenticate a supplicant before access is granted on the
network. EAPOL creates specialized EAP packets to allow EAP packets in the packet body.
The goal of port based authentication is to transport the EAP-Method data which
implements the actual authentication method.
EAP Packet Structure
Version
Type
Length
Configuring Wired 802.1x Authentication on Windows Server 2012
Packet Body
3
Version field identifies the version of the EAPOL protocol. The value is one octet in length
and has the value ‘0000 0002’.
Type field identifies the type of packet being sent and is one octet in length.
EAP-Packet: ‘0000 0000’
EAPOL-Start: ‘0000 0001’
EAPOL-Logoff: ‘0000 0010’
EAPOL-Key: ‘0000 0011’
EAPOL-Encapsulated-ASF-Alert: ‘0000 0100’
Length field defines the length of the packet body and is two octets in length. For example
an EAPOL Length field value of ‘0000 0000 0001 1010’ indicates that the Packet Body field
contains 22 octets of data.
Packet Body field is the payload portion
EAP Packet
Extensible Authentication Protocol is an authentication protocol which supports multiple
authentication methods. It works at the Data link layer and does not need IP to operate.
EAP Header
Code
Identifier
Length
Data
Type
Code field specifies the type of EAP packet and is one 1 byte long. The six EAP packet types
can be used:
Code
Description
x01
EAP-Request
x02
EAP-Response
x03
EAP-Success
x04
EAP-Failure
x05
EAP-Initiate
x06
EAP-Finish
Identifier field to match EAP-Response packets to Request packets and is one byte in length.
Configuring Wired 802.1x Authentication on Windows Server 2012
4
Length field includes the size of the EAP packets including EAP header and data fields and is
two bytes long.
Data field is variable in length, can contain zero or more bytes as indicated in the Length
field.
Type field defines the EAP packet type and is eight bits long.
Type
Description
1
Identity
2
Notification
3
NAK
4
MD5-Challenge
5
One-Time password
13
EAP-TLS
21
EAP-TTLS
25
PEAP
26
MS-EAP authentication
29
EAP-MSCHAP-V2
49
MS-IKEv2
Authentication process
When you enable 802.1x authentication, following events occur:

If the identity of the client is valid and 802.1x authentication is successful, the switch
grants the client access to the network

If 802.1x authentication times out and MAC authentication bypass is enabled, the
switch can use the MAC address of the client for authorization

If the client cannot be identified and a restricted VLAN is specified, the switch can
assign the client to the restricted VLAN
Configuring Wired 802.1x Authentication on Windows Server 2012
5
The switch re-authenticates the client when one of the following events occurs:

Periodic re-authentication is enabled and the re-authentication timer expires

You manually re-authenticate the client
User and Computer authentication
Authentication can be performed for a user, computer or both. The user or computer can be
authenticated via passwords or certificates.
EAP-TLS
EAP-TLS requires client-side and server side certificates for mutual authentication.
1. Authentication server submits certificate to supplicant
Configuring Wired 802.1x Authentication on Windows Server 2012
6
2. Supplicant validates server certificate (check if the FQDN is the same as the name in
the certificate and if the certificate is signed by a trusted CA, or that the certificate is
not revoked
3. Supplicant submits certificate to server
4. Server validates the certificate of the supplicant
PEAP-EAP-MSCHAPv2
PEAP-EAP-MSCHAPv2 requires that the authentication server presents a certificate to the
supplicant. The supplicant must have the Root CA of the CA that signed the authentication
server certificate. It first creates a secure tunnel between the authentication server and the
supplicant. This tunnel is created using a valid server certificate that the authentication
server sends to the supplicant. Within this secure channel, a new EAP negotiation takes
place to authenticate the client.
Authentication is based on a password, so this type of attack is susceptible to a dictionary
attack.
1. Authentication server submits certificate to supplicant
2. Supplicant validates server certificate
3. Supplicant submits password through encrypted tunnel
4. Authentication server validates supplicant password
If the authentication server is unavailable, 802.1x fails and all supplicants will be denied
access.
Authentication Initiation and Message Exchange
The connection can be initiated by the switch or by the client. The switch sends an EAPrequest/identity frame to the client to request its identity. The client responds with an EAPresponse/identity frame.
If the switch is not configured to supports 802.1x authentication and the client sends any
EAPOL frames, these frames are dropped. If the client is configured to supports 802.1x
authentication, and the client does not receive an EAP-request/identity frame after three
Configuring Wired 802.1x Authentication on Windows Server 2012
7
attempts, the client transmits frames as if the port is in authorized state. A port in
authorized state means that the client has been successfully authenticated.
When the client supplies its identity, the switch passes EAP frames between the client and
authorization server until authorization fails or succeeds.
If the client identity is valid and the 802.1x authentication succeeds, the switch grants the
client access to the network. If the switch gets an invalid identity from an 802.1x capable
client, the switch can assign the client to a restricted VLAN that provides limited services.
The switch can re-authenticate the client at regular times or when the re-authentication
timer expires. You can configure the switch to use timers based on Session-Timeout
(attribute 27) and the Termination-Action (attribute 29). Session-Timeout specifies the time
when re-authentication occurs and Termination-Action specifies the action to take during reauthentication. The action can be Initialize or Re-Authenticate. When you set the Initialize
action, the 802.1x session ends and the client will lose connectivity. When you set ReAuthenticate, the client will not lose the connection and simple re-authenticates.
Do not use Re-authentication and session timers if you are using MAB. The switch does not
re-learn the MAC address but sends the previously learned MAC address to the RADIUS
server. If you use these timers, MAB succeeds when 802.1x authentication fails. So at this
point, the client loses connectivity.
Configuring Wired 802.1x Authentication on Windows Server 2012
8
Message exchange process
Message Exchange during MAC authentication bypass
Ports in authorized and unauthorized states
The switch port state determines if the client is authorized to access the local area network
or not. The port starts in unauthorized state. In this state, the port disallows all traffic except
for 802.1x frames. When a client is successfully authenticated, the port is in authorized state
and allows all traffic from the client to the switch.
Configuring Wired 802.1x Authentication on Windows Server 2012
9
If a client does not support 802.1x authentication and connects to an unauthorized port, the
switch request the client’s identity. In this case, the client cannot responds to the request
and the port remains in unauthorized state. The client is not granted access to the network.
When an 802.1x enabled client connects to a port which is not enabled for 802.1x
authentication. The client initiates the authentication process by sending the EAPOL-start
frame. When the client does not receive a response from the switch, then client sends the
request for a number of times.
You can control the port authorization state by using dot1x port-control interface
configuration command:
Force-authorized: Disable 802.1x authentication and causes the port to the authorized state
without any authentication exchange required.
Force-unauthorized: Causes the port to remain in unauthorized state, ignoring all attempts
by the client to authenticate.
Auto: Enable 802.1x authentication and causes the client to begin in the authorized state,
allowing only EAPOL traffic to be sent and receive through the port.
When the client receives an accept frame from the authentication server, the client is
successfully authenticated and the state of the switch port is set to authorized. If the
authentication fails, the switch port remains in unauthorized state, but the client is able to
retry the authentication process.
If the authentication server cannot be reached, the switch will retransmit the request. If the
switch does not receive any responses from the authentication server after a specific
number of attempts, the authentication will fail and the client is not able to access resources
on the local area network.
When a client logs of, the client sends an EAP-logoff message, and the switch changes this
port back to unauthorized state.
Configuring Wired 802.1x Authentication on Windows Server 2012
10
Configuring 802.1X authentication on Catalyst 3560 Switch
addevsw01#config t
addevsw01(config)#aaa new-model
addevsw01(config)#aaa authentication dot1x default group radius
addevsw01(config)#aaa authorization network default group radius
addevsw01(config)#dot1x system-auth-control
addevsw01(config)#interface fa0/2
addevsw01(config-if)#switchport mode access
addevsw01(config-if)#authentication port-control auto
Configuring switch-to-RADIUS server communication
A RADIUS server is identified with its hostname or IP address and specific UDP port numbers
for authentication and accounting.
The following configuration shows how to configure the switch to use a RADIUS server with
IP address 10.32.5.15 to use port 1812 as authorization port and 1813 for accounting, and
set the RADIUS secret to accessdenied
addevsw01(config)#radius-server host 10.32.5.15 auth-port 1812
acct-port 1813 key accessdenied
The RADIUS secret must match the secret key on the NPS server.
Enabling periodic re-authentication
You can also specify periodic 802.1x client re-authentication and how often it needs to be
occurred. The number of seconds between re-authentication is by default 3600 seconds.
The switch can re-authenticate the client at regular times or when the re-authentication
timer expires. If the switch is configured to use a RADIUS server, you can configure the
switch to use timers based on the following RADIUS attributes.
RADIUS Attribute
Value
[27] Session-Timeout
Value in seconds
[29] Termination-Action
Value in seconds
The Termination-Action specifies which action to take during re-authentication. Possible
actions are Initialize and Re-authenticate. When you use Initialize, the 802.1x session ends
Configuring Wired 802.1x Authentication on Windows Server 2012
11
and connectivity is lost during re-authentication. When you use Re-authenticate the session
is not affected during re-authentication.
This configuration shows how to enable periodic re-authentication and set the number of
seconds between re-authentication attempts to 4800
addevsw01(config)#int fa0/2
addevsw01(config-if)#authentication periodic
addevsw01(config-if)#authentication timer reauthenticate 4800
You can manually re-authenticate the client computer connected to a specific port at any
time by entering the following command:
addevsw01(config)#dot1x re-authenticate int fa0/2
Configuring the quiet period
When the switch is not able to authenticate the client, the switch remains idle for a period of
time, and then tries again. The idle time is determined with the quiet period.
This example shows how to configure the switch with a quiet time of 30 seconds.
addevsw01(config)#int fa0/2
addevsw01(config-if)#dot1x timeout quiet-period 30
Configuring the switch-to-client retransmission time
Dot1x timeout tx-period
Before authentication can take place, the switch sends an EAP-request/identify frame to the
client. The client responds with an EAP-response/identity frame. If the switch does not
receive a message within a period of time, the switch retransmits the frame.
You can configure the default retransmission time as follow:
addevsw01(config)#interface fa0/2
addevsw01(config-if)#dot1x timeout tx-period 30
Dot1x max-reauth-req:
The number of times the switch resends the request-identity frame
The default value for dot1x timeout is 30 seconds and dot1xmax-reauth-req is 2. Based on
timeout = (max-reauth-req + 1) x tx-period. It takes 90 seconds for a supplicant to get access
Configuring Wired 802.1x Authentication on Windows Server 2012
12
through mac authentication bypass on guest vlan. When this timeout expired and MAB is
configured, MAC authentication can takes place.
Authentication timer restart:
If 802.1x timeouts on the fallback mechanism fails or has been configured, the authenticator
will wait a period of time. After this time, the authentication process starts over.
Enabling multiple hosts
You can attach multiple hosts to a single 802.1x enabled port. Only one of the attached hosts
must be successfully authorized for all hosts to be granted network access.
If the port becomes un-authorized, all attached clients are denied access to the network.
addevsw01(config)#interface fa0/2
addevsw01(config-if)# authentication host-mode multi-host
Display Statistics and Status
You can use following command to display statistics for a specific port:
addevsw01#show dot1x authentication int fa0/2
Using 802.1x Authentication with VLAN Assignment
You can limit network access by using VLAN assignment. After the switch authenticates the
client on an 802.1x enabled port, the RADIUS server sends the VLAN ID to configure the
switch port. This feature can be used to limit network access.

When no VLAN is supplied by the RADIUS server or 802.1x authentication is disabled,
the switch becomes access to its default VLAN.

When incorrect VLAN information is supplied by the RADIUS server and 802.1x
authentication is enabled, the switch place the switch port into unauthorized state to
prevents ports to be member of another VLAN.

When VLAN information is supplied correctly by the RADIUS server and 802.1x
authentication is enabled, the switch port is configured with the VLAN after
successful authentication.

If multiple-hosts mode is enabled on the switch port, all hosts are placed in the same
VLAN as the first authenticated host.
Configuring Wired 802.1x Authentication on Windows Server 2012
13
It is important that VLAN 1 or management VLAN is not the default VLAN. If authentication
fails, the wired client can still access the network. Shutdown all switch ports which you don’t
use.
A RADIUS Server must return these attributes to the switch:
RADIUS Attribute
Value
[64] Tunnel-Type
VLAN
[65] Tunnel-Medium-Type
802
[81] Tunnel-Private-Group-ID
VLAN ID
Using 802.1x Authentication with Guest VLAN
You can use a Guest VLAN to provide limited access the clients. When you enable a Guest
VLAN on the switch, the client becomes a member of the Guest VLAN is authentication
cannot be performed. For example the client uses an Operating System that does not
contains the 802.1x client.
When the client does not send an EAPOL frame or the switch does not receive a response to
an EAP request/identity frame, the switch assigns the 802.1x port to the Guest VLAN. Guest
VLANs are supported on single-host or multiple-hosts mode.
addevsw01(config)#interface fa0/2
addevsw01(config-if)#authentication event no-response action
authorize vlan 100
Using 802.1x Authentication with Restricted VLAN
If for some reason an IEEE 802.1x compliant client computer is not able to authenticate, the
authentication process fails and the client can be placed into a restricted VLAN. This allows
client computer to access limited resources in the restricted VLAN.
These clients are 802.1x compliant but fail the authentication process. For example, the
certificate of the client computer has expired.
addevsw01(config)#interface fa0/2
addevsw01(config-if)#authentication event fail action authorize
vlan 99
Configuring Wired 802.1x Authentication on Windows Server 2012
14
When the client is not able to authenticate within 3 times, the switch places the switch port
into the restricted VLAN. Users for which authentication fails, remains in the restricted VLAN
until the next re-authentication occurs. At configured intervals, the switch port sends a reauthentication message. If re-authentication fails, the switch port remains in the restricted
VLAN. Otherwise the switch port is configured in to configured VLAN or the VLAN ID sent by
the RADIUS Server. Restricted VLANs are only supported in single-host mode.
Using a Filter-ID to create a VLAN ACL
You can use this attribute to assign an ACL to a client who is authorized on the RADIUS
server. The ACL must exist on the switch before connection is filtered. In the example below,
access to the IIS Web Services running on that server are denied. The syntax is as follows:
addevsw01(config)#access-list 101 deny tcp any host 10.32.5.3 eq www
addevsw01(config)#access-list 101 permit ip any any
Using Cisco-AV-Pair to create a VLAN ACL
You can also use the Cisco-AV-Pair attribute to configure downloadable ACLs. This means
that the ACLs don’t need to be exists on the switch, but are downloaded to the authorized
client computer. In the example below, access to the IIS Web Services running on that server
are denied. The syntax is as follows:
ip:inacl#201=deny tcp any host 10.32.5.3 eq www
ip:inacl#201=permit ip any any
Using 802.1x Authentication with Port Security
When you enable 802.1x on a switch port and the switch port is additionally configured with
port security; first authentication takes place and port security manages network access for
all MAC addresses.
Interaction between 802.1x authentication and port security:

When the client is authenticated and port security table is not full, the MAC address
of the client is added to the list of secure hosts. The switch port comes up normally.

When the client is authenticated and port security table is full, the switch port shuts
down.
Configuring Wired 802.1x Authentication on Windows Server 2012
15

When the client logs off, all entries in the secure host table are cleared and the
switch port change to unauthenticated state.

If you administratively shutdown a switch port, all entries are removed from the
secure host table and the switch port becomes unauthenticated.
You can configure 802.1x authentication with port security in single-host or multiple-hosts
mode.
addevsw01(config-if)#switchport port-security mac-address macaddress
Using 802.1x authentication using MAC Authentication Bypass (MAB)
You can configure an 802.1x enabled port on the switch to authorize clients based on the
MAC address. You can use Active Directory as a MAC address database for which are allowed
to access the network. When the client connects to the switch, the RADIUS Server sends a
RADIUS access/request message with a username and password based on the MAC address.
If authorization is successful, the switch allows the client access to the network. If
authorization fails, the switch assigns the client to the Guest VLAN.
If the switch detects an EAPOL frame from an 802.1x capable client, the switch uses 802.1x
authentication instead of MAC authentication bypass.
If the switch already authorized a port using MAC authentication bypass and detects an
802.1x capable client, the switch does not unauthorized the client. When re-authentication
occurs, the switch uses 802.1x authentication as preferred method.
Clients that where authorized with MAC authentication bypassed can be re-authenticated. If
re-authentication is successful, the switch keeps the port in the same VLAN. Otherwise the
switch assigns the port to the Guest VLAN.
You need to create a domain user and password in Active Directory for all your clients which
need to be authenticated via MAB.
Configuring Wired 802.1x Authentication on Windows Server 2012
16
To be able to authenticate those clients with only the MAC information, you need to create a
policy on NPS which includes the Calling Station ID as condition.
To authenticate users, you need only unencrypted authentication and disable all the others.
Configuring Wired 802.1x Authentication on Windows Server 2012
17
addevsw01(config)#interface fa0/2
addevsw01(config-if)#mab
Before MAB is in place, the port enabled for MAB must be timeout on 802.1x authentication
first.
RADIUS Message Types
Access-Request: Sent by a RADIUS client to request authentication and authorization for a
network access connection attempt.
Access-Accept: Sent by a RADIUS server in response to an Access-Request message. This
message informs the RADIUS client that the connection attempt is authenticated and
authorized.
Access-Reject: Sent by a RADIUS server in response to an Access-Request message. This
message informs the RADIUS client that the connection attempt is rejected. A RADIUS server
sends this message if either the credentials are not authentic or the connection attempt is
not authorized.
Access-Challenge: Sent by a RADIUS server in response to an Accept-Request message. This
message is a challenge to the RADIUS client that requires a response.
Accounting-Request: Sent by a RADIUS client to specify accounting information for a
connection that was accepted.
Accounting-Response: Sent by the RADIUS server in response to the Accounting-Request
message. This message acknowledges the successful receipt and processing of the
Accounting-Request message.
IP Address Assignment
After successful authentication, the wired client needs to receive an IP address before
further communication can takes place. The client can receives an IP address from a DHCP
server available on the network or from a DHCP server configured on your switch or other
network device. In this paper, we use a Microsoft DHCP Server and create the necessary
scopes.
Configuring Wired 802.1x Authentication on Windows Server 2012
18
Creating VLANs
Before you assign VLAN ID attribute via RADIUS you need to configure the required VLANs
on your switch.
The following creates a VLAN 5
addevsw01(config)#vlan 5
The following creates a VLAN 10
addevsw01(config)#vlan 10
The following creates a VLAN 20
addevsw01(config)#vlan 20
The following creates a VLAN 99
addevsw01(config)#vlan 99
The following creates a VLAN 100
addevsw01(config)#vlan 100
Assigning IP address
Assign an IP address to the interface of VLAN 5
addevsw01(config)#interface vlan 5
addevsw01(config-if)#ip address 10.32.5.254 255.255.255.0
addevsw01(config-if)#no shutdown
Assign an IP address to the interface of VLAN 10
addevsw01(config)#interface vlan 10
addevsw01(config-if)#ip address 10.32.10.254 255.255.255.0
addevsw01(config-if)#ip helper-address 10.32.5.3
addevsw01(config-if)#no shutdown
Assign an IP address to the interface of VLAN 20
addevsw01(config)#interface vlan 20
addevsw01(config-if)#ip address 10.32.20.254 255.255.255.0
addevsw01(config-if)#ip helper-address 10.32.5.3
Configuring Wired 802.1x Authentication on Windows Server 2012
19
addevsw01(config-if)#no shutdown
Assign an IP address to the interface of VLAN 99
addevsw01(config)#interface vlan 99
addevsw01(config-if)#ip address 10.32.99.254 255.255.255.0
addevsw01(config-if)#ip helper-address 10.32.5.3
addevsw01(config-if)#no shutdown
Assign an IP address to the interface of VLAN 100
addevsw01(config)#interface vlan 100
addevsw01(config-if)#ip address 10.32.100.254 255.255.255.0
addevsw01(config-if)#ip helper-address 10.32.5.3
addevsw01(config-if)#no shutdown
VLAN information can be retrieved as follows
addevsw01#show vlan
Schematic Design
For this lab, I use a Cisco Catalyst 3560 switch which also provides inter-VLAN routing
between the various networks.
Name
Software
Role
ADDEVDC01
Windows Server 2008 R2
DC,DNS,CA
ADDEVDC04
Windows Server 2012
NPS, DHCP
ADDEVWKS01
Windows 7
Client
ADDEVSW01
Cisco Catalyst 3560
Switch
Configuring Wired 802.1x Authentication on Windows Server 2012
20
Domain Controller
NPS/DHCP
Native VLAN 5
Clients
fa0/1
Wired Computers
VLAN 10
fa0/2
Wired Computers
VLAN 20
fa0/2
Restricted VLAN 99
Guest VLAN 100
Clients
To enable routing between VLANs, use the following command:
addevsw01(config)#ip routing
The IP address of addevdc01 is 10.32.5.3, the IP address of addevdc04 is 10.32.5.15 and the
addevwks01 is configured as a DHCP client.
Table overview of network configuration:
Network ID
VLAN ID
Default Gateway
Description
10.32.5.0/24
5
10.32.5.254
Native vlan
10.32.10.0/24
10
10.32.10.254
Clients vlan
10.32.20.0/24
20
10.32.20.254
Clients vlan
10.32.99.0/24
99
10.32.99.254
Restricted vlan
10.32.100.0/24
100
10.32.100.254
Guest vlan
Prepare the environment for 802.1x Authentication Task List
You need to prepare the environment with the appropriate groups to support 802.1x based
authentication. The next step is to create Active Directory Security Groups for authorized
access and certificate enrollment.

Create a group AutoEnroll Server Authentication Certificate

Create a group AutoEnroll Client Authentication Certificate

Create a group Wired Computers VL AN 10
Configuring Wired 802.1x Authentication on Windows Server 2012
21
Create a group AutoEnroll NPS Server Authentication Certificate

Open Active Directory Users and Computer from Administrative Tools

Select Organizational Unit you want to create the group

Right click on the OU, select New – Group

On the New–Group window, type the name of the group AutoEnroll Server
Authentication Certificate, and click OK
Create a group AutoEnroll Client Authentication Certificate

Select Organizational Unit you want to create the group

Right click on the OU, select New – Group

On the New – Group window, type the name of the group AutoEnroll Client
Authentication Certificate, and click OK
Create a group Wired Computers VLAN 10

Select Organizational Unit you want to create the group

Right click on the OU, select New – Group

On the New – Group window, type the name of the group Wired Computers VLAN
10, and click OK
Configuring and Deploying 802.1x Authentication Certificates Task
List
Before we can use 802.1x authentication we have to enroll for certificates. In this section,
you will create and enroll hosts on the network to enroll for a certificate. The client
computer will send his identity (computer certificate) to the switch, whereas the switch
authenticates the client computer against the Network Policy server.

Create a NPS Server Authentication Certificate

Create a Workstation Authentication Certificate

Adding the certificate templates to the Certificate Authority

Add the NPS Server account to the autoenrollment group

Add client computer accounts to the autoenrollment group

Add client computer accounts to the authorized computers group
Configuring Wired 802.1x Authentication on Windows Server 2012
22

Create a GPO for NPS Server certificate enrollment
Create a NPS Server Authentication Certificate

Open Certificate Authority snap-in from Administrative Tools.

Right click on Certificate Templates and select Manage.

Right click on RAS and IAS Server certificate Template and select Duplicate
Template.

On the Duplicate Template dialog box, select Windows 2003 Server and click OK

On the General tab, in the Template display name field, type 2012 Server
Authentication Certificate.
Configuring Wired 802.1x Authentication on Windows Server 2012
23

Click on the Subject Name tab, select Build from this Active Directory information.
Ensure that the Subject name format is set to Common name and that only DNS
Name is selected under Include this information in subject alternative name.
Configuring Wired 802.1x Authentication on Windows Server 2012
24

Click on the Security tab, click on the Add button and add AutoEnroll Server
Authentication Certificate group, assign Enroll and Autoenroll permissions and click
OK.
Configuring Wired 802.1x Authentication on Windows Server 2012
25
You should remove any of the other security groups that have permissions to enroll and/or
autoenroll this certificate template.
Create a Workstation Authentication Certificate
A certificate is required to authenticate computers for port based authentication.

Right click on the Workstation Authentication certificate template and select
Duplicate Template.

Click on the General tab, in the Template display name, type Workstation
Authentication Certificate.
Configuring Wired 802.1x Authentication on Windows Server 2012
26

Click on the Subject Name tab, ensure to select Built from this Active Directory
Information. Under Subject name format select Common Name. Ensure that DNS
name is the only option selected under Include this information in subject alternate
name
Configuring Wired 802.1x Authentication on Windows Server 2012
27

Click on the Security tab, click on the Add button and add AutoEnroll Client
Authentication Certificate group, assign Enroll and Autoenroll permissions and click
OK
Configuring Wired 802.1x Authentication on Windows Server 2012
28

Close Certificates Templates snap-in
You should remote any of the other security groups that have permissions to enroll and/or
autoenroll this certificate template.
Adding the Certificate Templates to the Certificate Authority
After you have configured or created new certificate templates, you have to add them to the
certificate authority to enable enrollment.

From the Certificate Authority snap-in, right click on Certificate Templates, select
New – Certificate Template to Issue.
Select following certificate templates: Workstation Authentication Certificate and 2012
Server Authentication Certificate and click OK.
Configuring Wired 802.1x Authentication on Windows Server 2012
29
Add the NPS Server account to the AutoEnroll Server Authentication Certificate
group

Open Active Directory Users and Computers from Administrative Tools

Double click on AutoEnroll Server Authentication Certificate group.

Click on the Member tab and click Add.

In the Select Users, Contacts, Computers, or Groups dialog box, in the Enter the
object names to select add ADDEVSRV01 computer account and click OK.
Add client computer accounts to the AutoEnroll Client Authentication
Certificate group

Double click on AutoEnroll Client Authentication Certificate group.

Click on the Member tab and click Add.

In the Select Users, Contacts, Computers, or Groups dialog box, in the Enter the
object names to select add ADDEVWKS01 computer account and click OK.
Add client computer accounts to the Wired Computers VLAN 10

Double click on Wired Computers VLAN 10 group.

Click on the Member tab and click Add.

In the Select Users, Contacts, Computers, or Groups dialog box, in the Enter the
object names to select add ADDEVWKS01 computer account and click OK.
Create a GPO for NPS Server certificate enrollment

Open Group Policy Management from Administrative Tools.

Expand Domain, expand Group Policy Objects, and select New Group Policy Objects.

On the New – Group Policy dialog box, type Autoenroll Server Certificate and click OK
Configuring Wired 802.1x Authentication on Windows Server 2012
30

Right click on Autoenroll Server Certificate, select GPO Status, and select User
Configuration Settings Disabled

Right click on Autoenroll Server Certificate and select Edit.

Expand Computer Configuration | Policies | Windows Settings | Security Settings |
Public Key Policies.

In the right pane, double click on Certificate Services Client – Auto-enrollment

On the Certificate Services Client – Auto-enrollment Properties dialog box, select
Enroll Certificates Automatically, select Renew expired certificates and select
Update certificates that use certificate templates and click OK.

Close Group Policy Editor

Link group policy to the organizational unit which contains the computer account of
your NPS server.

On the NPS server, open command prompt and run launch gpupdate.exe or restart
the server.
Configuring Wired 802.1x Authentication on Windows Server 2012
31
Install and Configure your DHCP Server
Client computers on our network will receive an IP address based on the VLAN where the
client computer is a member of. In our lab, we will create a scope for VLAN 10.

Install the DHCP Server Role

Configure your DHCP Server with a scope for VLAN 10

Configure your DHCP Server with a scope for VLAN 20

Configure your DHCP Server with a scope for VLAN 99

Configure your DHCP Server with a scope for VLAN 100
Install the DHCP Server role

Open Server Manager from the Administrative Tools, expand Roles and select Add
Roles

On the Select Server Role page, select DHCP Server and click Next

On the DHCP Server page, select Next
Configuring Wired 802.1x Authentication on Windows Server 2012
32

On the Select Network Connection Binding page, select the Network Connection
and click Next

On the Specify IPv4 DNS Server Settings page, type the IP address of your preferred
DNS server and click Next

On the Specify IPv4 WINS Server Settings page, select WINS is not required and click
Next

On the Add or Edit DHCP Scopes page, click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
33

On the Configure DHCPv6 Stateless Mode page, select Disable and click Next

On the Authorize DHCP Server page, select use Current Credentials and click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
34

On the Confirm Installation Selection page, click Install

On the Installation Results page, click Close
Configure DHCP Server with a scope for VLAN 10

Open DHCP Console from Administrative Tools

Right click on IPv4 and select New Scope

On the Welcome to the New Scope Wizard page, click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
35

On the Scope Name page, type a name for the scope and click Next

On the IP Address Range page, specify Start and End IP address. Also specify the
correct subnet mask and click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
36

On the Add Exclusions page, click Next

On the Lease Duration page, specify a lease duration and click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
37

On the Configure DHCP Option page, select No, I will configure these options later
and click Next

On the Completing the New Scope Wizard page, click Finish
Configuring Wired 802.1x Authentication on Windows Server 2012
38

Expand Scope, right click on Scope Options and select Configure Options

On the Scope Options dialog box, select the following: 003 Router 10.32.10.254, 006
DNS Server 10.32.5.3, 015 DNS Domain Name addev.local and click OK

Right click on the Scope and select Activate
Configure DHCP Server with a scope for VLAN 20

Open DHCP Console from Administrative Tools

Right click on IPv4 and select New Scope

On the Welcome to the New Scope Wizard page, click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
39

On the Scope Name page, type a name for the scope and click Next

On the IP Address Range page, specify Start and End IP address. Also specify the
correct subnet mask and click Next

On the Add Exclusions page, click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
40

On the Lease Duration page, specify a lease duration and click Next

On the Configure DHCP Option page, select No, I will configure these options later
and click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
41

On the Completing the New Scope Wizard page, click Finish

Expand Scope, right click on Scope Options and select Configure Options

On the Scope Options dialog box, select the following: 003 Router 10.32.20.254, 006
DNS Server 10.32.5.3, 015 DNS Domain Name addev.local and click OK

Right click on the Scope and select Activate
Configuring Wired 802.1x Authentication on Windows Server 2012
42
Configure DHCP Server with a scope for VLAN 99 (Authentication Fail VLAN)

Open DHCP Console from Administrative Tools

Right click on IPv4 and select New Scope

On the Welcome to the New Scope Wizard page, click Next

On the Scope Name page, type a name for the scope and click Next

On the IP Address Range page, specify Start and End IP address. Also specify the
correct subnet mask and click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
43

On the Add Exclusions page, click Next

On the Lease Duration page, specify a lease duration and click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
44

On the Configure DHCP Option page, select No, I will configure these options later
and click Next

On the Completing the New Scope Wizard page, click Finish
Configuring Wired 802.1x Authentication on Windows Server 2012
45

Expand Scope, right click on Scope Options and select Configure Options

On the Scope Options dialog box, select the following: 003 Router 10.32.99.254, 006
DNS Server 10.32.5.3, 015 DNS Domain Name addev.local and click OK

Right click on the Scope and select Activate
Configure DHCP Server with a scope for VLAN 100 (Guest VLAN)

Open DHCP Console from Administrative Tools

Right click on IPv4 and select New Scope

On the Welcome to the New Scope Wizard page, click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
46

On the Scope Name page, type a name for the scope and click Next

On the IP Address Range page, specify Start and End IP address. Also specify the
correct subnet mask and click Next

On the Add Exclusions page, click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
47

On the Lease Duration page, specify a lease duration and click Next

On the Configure DHCP Option page, select No, I will configure these options later
and click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
48

On the Completing the New Scope Wizard page, click Finish

Expand Scope, right click on Scope Options and select Configure Options

On the Scope Options dialog box, select the following: 003 Router 10.32.100.254,
006 DNS Server 10.32.5.3, 015 DNS Domain Name addev.local and click OK

Right click on the Scope and select Activate
Configuring Wired 802.1x Authentication on Windows Server 2012
49
Install and configure your NPS Server
The task of the NPS server is the talk with the switch. The NPS server will be configured as a
RADIUS server, whereas the switch will be configured as a RADIUS client. Afterwards, we
need to create a Connection Request Policy which allows a connection between the switch
and the NPS server. Next step is to create Network Policies where we can provide more
details on how the client on the network needs to be authenticated.

Install the NPS Server Role

Configure RADIUS Clients on NPS Server

Configure Connection Request Policy

Configure a Network Policy for EAP-TLS

Configure a Network Policy for PEAP-EAP-MSCHAPv2

Configure a Network Policy for PEAP-EAP-TLS
Install the NPS Server Role

Open Server Management from Administrative Tools

On the Select Server Role page, select Network Policy and Access Services, and click
Next

On the Network and Access Services page, click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
50

On the Select Role Services page, select Network Policy Server

On the Confirm Installation Selections page, click Install
Configuring Wired 802.1x Authentication on Windows Server 2012
51
Configure Accounting

From the Network Policy Server console, click on Accounting

Select Configure Local File Logging

On the Log File tab, select IAS as format and click OK
Configure RADIUS Clients on NPS Server

Open Network Policy Server from Administrative Tools

Expand RADIUS Clients and Servers, right click on RADIUS Clients and select New
RADIUS Client

On the New RADIUS Client dialog box, specify a friendly name and IP address

From the Vendor list box, select Cisco and specify a Shared Secret
Configuring Wired 802.1x Authentication on Windows Server 2012
52

Click on Advanced, uncheck or check the required options
Configuring Wired 802.1x Authentication on Windows Server 2012
53

Click OK
Configure a Connection Request Policy

From the Network Policy Server Console, right click on Connection Request Policies
and select New

On the Specify Connection Request Policy Name and Connection Type page, type a
name for the policy and click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
54

On the Specify Conditions page, click Add. Select NAS Port Type (Ethernet)

On the Select conditions dialog box, select NAS IPv4 Address and click Add

On the NAS IPv4 Address dialog box, type the management IP address of the switch.

Click OK and click Next

On the Specify Connection Request Forwarding page, select Authenticate requests
on this server and click Next

On the Specify Authentication Methods page, click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
55

On the Configure Settings page, click Next

On the Completing Connection Request Policy Wizard page, click Finish
Configure a Network Policy for EAP-TLS

From the Network Policy Server Console, right click on Network Policies and select
New

On the Specify Network Policy Name and Connection Type page, type a name for
your policy and click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
56

On the Specify Conditions page, click Add

From the Select Conditions dialog box, select NAS Port Type (Ethernet) and click Add

From the Select Condition dialog box, add the following Windows Groups Domain
Computers, Domain Users , and click Next

On the Specify Access Permissions page, select Access Granted and click Next

On the Configure Authentication Methods page, clear MS-CHAP, clear MS-CHAP-v2
and click Add
Configuring Wired 802.1x Authentication on Windows Server 2012
57

On the Select EAP dialog box, select Microsoft: Smart card or other Certificate and
click OK

On the Configure Constraints page, click Next

On the Configure Settings page, add the following Standard Attributes
Configuring Wired 802.1x Authentication on Windows Server 2012
58

Click on Vendor Specific attributes and add Microsoft Tunnel-Tag equal to 1, click OK
and click Next

On the Completing New Network Policy page, click Finish
Configuring Wired 802.1x Authentication on Windows Server 2012
59
Configure a Network Policy for PEAP-EAP-MSCHAPv2

From the Network Policy Server Console, right click on Network Policies and select
New

On the Specify Network Policy Name and Connection Type page, type a name for
your policy and click Next

On the Specify Conditions page, click Add
Configuring Wired 802.1x Authentication on Windows Server 2012
60

From the Select Conditions dialog box, select NAS Port Type (Ethernet) and click Add

From the Select Condition dialog box, add the following Windows Groups Domain
Computers, Domain Users and click Next

On the Specify Access Permissions page, select Access Granted and click Next

On the Configure Authentication Methods page, clear MS-CHAP, clear MS-CHAP-v2
and click Add

On the Select EAP dialog box, select Microsoft: Protected EAP (PEAP)
Configuring Wired 802.1x Authentication on Windows Server 2012
61

Configure settings as below and click OK

On the Configure Constraints page, click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
62

On the Configure Settings page, add the following Standard Attributes

Click on Vendor Specific attributes and add Microsoft Tunnel-Tag equal to 1, click OK
and click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
63

On the Completing New Network Policy page, click Finish
Configure a Network Policy for PEAP-EAP-TLS

From the Network Policy Server Console, right click on Network Policies and select
New

On the Specify Network Policy Name and Connection Type page, type a name for
your policy and click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
64

On the Specify Conditions page, click Add

From the Select Conditions dialog box, select NAS Port Type (Ethernet) and click Add

From the Select Condition dialog box, add the following Windows Groups Domain
Computers, Domain Users and click Next

On the Specify Access Permissions page, select Access Granted and click Next
Configuring Wired 802.1x Authentication on Windows Server 2012
65

On the Configure Authentication Methods page, clear MS-CHAP, clear MS-CHAP-v2
and click Add

On the Select EAP dialog box, select Microsoft: Protected EAP (PEAP)

Configure settings as below and click OK
Configuring Wired 802.1x Authentication on Windows Server 2012
66

On the Configure Constraints page, click Next

On the Configure Settings page, add the following Standard Attributes
Configuring Wired 802.1x Authentication on Windows Server 2012
67

Click on Vendor Specific attributes and add Microsoft Tunnel-Tag equal to 1, click OK
and click Next

On the Completing New Network Policy page, click Finish
Configuring Wired 802.1x Authentication on Windows Server 2012
68
Configure your policy with Filter-Id ACL
addevsw01(config)#access-list 101 deny tcp any host 10.32.5.3 eq www
addevsw01(config)#access-list 101 permit ip any any
You need to add the RADIUS attribute into your Network Policy.

Open Network Policy Server from Administrative Tools

Right click on the Network Policy, select Properties and click Settings

On the Add Standard RADIUS Attribute page, select Filter-Id and click Add
Configuring Wired 802.1x Authentication on Windows Server 2012
69

On the Attribute Information page, click String and type the ACL number

Click OK
Configuring Wired 802.1x Authentication on Windows Server 2012
70

Click OK
Configure your policy with Cisco-AV-Pair ACL
ip:inacl#201=deny tcp any host 10.32.5.3 eq www
ip:inacl#201=permit ip any any
You need to add the Vendor attribute into your Network Policy.

Open Network Policy Server from Administrative Tools


Right click on the Network Policy, select Properties and click Settings
On the Add Vendor Specific Attribute page, select Cisco and click on Cisco-AV-Pair
and click Add
Configuring Wired 802.1x Authentication on Windows Server 2012
71

In the Attribute value box, type your ACL

Click OK

In the Attribute value box, type your ACL
Configuring Wired 802.1x Authentication on Windows Server 2012
72

Click OK

Click OK, click Close and click OK
Create a Secure Baseline GPO for Windows 7 client Computers

Configure Windows 7 client computers for certificate enrollment

Configure Windows 7 client computers to enable Wired Authentication

Configure Windows 7 client computers for 802.1x authentication via Group Policies
and PEAP-EAP-TLS
Configuring Wired 802.1x Authentication on Windows Server 2012
73

Configure Windows 7 client computers for 802.1x authentication via Network Sharing
Center and PEAP-EAP-MSCHAPv2

Configure Windows 7 client computers for 802.1x authentication via Network Sharing
Center and EAP-TLS

Configure Windows 7 client computers for 802.1x authentication via Network Sharing
Center and PEAP-EAP-TLS
Configure Windows 7 client computers for certificate enrollment

Open Group Policy Management from Administrative Tools

Expand, Domain | Group Policy Objects | Group Policy, and select New Group Policy
Object. Type Secure Baseline Client Computers

Right click on Secure Baseline Client Computers, select GPO Status and select User
Configuration Settings Disabled.

Right click on Secure Baseline Client Computers and select Edit.

Expand Computer Configuration | Policies | Windows Settings | Security Settings |
Public Key Policies, double click on Certificate Services Client-Auto Enrollment.

On the Certificate Services Client-Auto Enrollment dialog box, select Enabled.
Configuring Wired 802.1x Authentication on Windows Server 2012
74

Select Renew expired certificates, select Update certificates and click OK.
Configure Windows 7 client computers to enable Wired Authentication
Before we can configure a Windows 7 client computer with 802.1x authentication, we need
to enable the Authentication tab, which is part of the local area connection. This
Authentication tab will be displayed when the Wired AutoConfig service is started.

Select System Services, right click on WiredAutoConfig, and select Properties.

Select Define this Policy Setting, and change service startup mode to Automatic.
Configuring Wired 802.1x Authentication on Windows Server 2012
75

Click OK.
Configure Windows 7 client computers for 802.1x authentication via Group
Policy and PEAP-EAP-TLS

Right click on Wired Network Policies and select Create a New Windows Vista
Policy.

On the New Vista Wired Network Policy Properties dialog box, type a policy name
Configuring Wired 802.1x Authentication on Windows Server 2012
76

Click on the Security tab. Select Enable use of IEEE 802.1x authentication for
network access.

From the Select a network authentication method list box, select Smart Card or
certificate.

On the Authentication Mode list box, select User or Computer authentication.
Configuring Wired 802.1x Authentication on Windows Server 2012
77

Select Enforce advanced 802.1X settings and click OK.

Click on Advanced and select Enforce advanced 802.1X settings
Configuring Wired 802.1x Authentication on Windows Server 2012
78

Click OK and Click OK

Close Group Policy Editor.

Link GPO to the OU of your workstations

Restart client computer or launch gpupdate.exe
Configure Windows 7 client computers for 802.1x authentication via Network
and Sharing Center for PEAP-EAP-MSCHAPv2

Open Network and sharing Center, and select Change adapter settings

Right click on Local Area Connection and select Properties

Select Authentication tab and select Enable IEEE 802.1X authentication

On the Choose a network authentication method list box, select Microsoft:
Protected EAP (PEAP)

Click on Settings and select Secured Password (EAP-MSCHAPv2)
Configuring Wired 802.1x Authentication on Windows Server 2012
79

Click OK

Clear Remember my credentials for this connection each time I’m logged on and
enable Fallback to unauthorized network access
Configuring Wired 802.1x Authentication on Windows Server 2012
80

Click Additional Settings, select Specify authentication mode and select Computer
authentication from the list
Configuring Wired 802.1x Authentication on Windows Server 2012
81
 Click OK
Configure Windows 7 client computers for 802.1x authentication via Network
and Sharing Center for EAP-TLS

Open Network and sharing Center, and select Change adapter settings

Right click on Local Area Connection and select Properties

Select Authentication tab and select Enable IEEE 802.1X authentication

On the Choose a network authentication method list box, select Microsoft: Smart
Card or other Certificate

Clear Remember my credentials for this connection each time I’m logged on and
enable Fallback to unauthorized network access
Configuring Wired 802.1x Authentication on Windows Server 2012
82

Click Additional Settings, select Specify authentication mode and select Computer
authentication from the list
Configuring Wired 802.1x Authentication on Windows Server 2012
83

Click OK
Configure Windows 7 client computers for 802.1x authentication via Network
and Sharing Center for PEAP-EAP-TLS

Open Network and sharing Center, and select Change adapter settings

Right click on Local Area Connection and select Properties

Select Authentication tab and select Enable IEEE 802.1X authentication

On the Choose a network authentication method list box, select Microsoft:
Protected EAP (PEAP) and click Settings
Configuring Wired 802.1x Authentication on Windows Server 2012
84

From the Select Authentication Method list box, select Smart Card or other
certificate and click OK
Configuring Wired 802.1x Authentication on Windows Server 2012
85

Clear Remember my credentials for this connection each time I’m logged on and
enable Fallback to unauthorized network access
Configuring Wired 802.1x Authentication on Windows Server 2012
86

Click Additional Settings, select Specify authentication mode and select User or
Computer authentication from the list
Configuring Wired 802.1x Authentication on Windows Server 2012
87

Click OK
Configuring Catalyst 3560 for 802.1x authentication Task List
The next step is to configure the switch to support port-based authentication.

Enabling 802.1x authentication on the switch

Configuring switch-to-RADIUS server communication

Configure Guest VLAN

Configure Restricted VLAN

Enabling periodic re-authentication

Display statistics and status
Configuring 802.1x authentication on the switch
addevsw01#config t
addevsw01(config)#aaa new-model
addevsw01(config)#aaa authentication dot1x default group radius
Configuring Wired 802.1x Authentication on Windows Server 2012
88
addevsw01(config)#aaa authorization network default group radius
addevsw01(config)#dot1x system-auth-control
addevsw01(config)#interface fa 0/2
addevsw01(config-if)#switchport mode access
addevsw01(config-if)#authentication port-control auto
Configuring switch-to-RADIUS server communication
addevsw01(config)#radius-server host 10.32.5.15 auth-port 1812
acct-port 1813 key accessdenied
Configure Guest VLAN
addevsw01(config)#interface fa0/2
addevsw01(config-if)#authentication event no-response action
authorize vlan 100
Configure Restricted VLAN
addevsw01(config)#interface fa0/2
addevsw01(config-if)#authentication event fail action authorize
vlan 99
Enabling periodic re-authentication
addevsw01(config)#int fa 0/2
addevsw01(config-if)#authentication periodic
addevsw01(config-if)#authentication timer reauthenticate 4800
Display Statistics and Status
addevsw01#show dot1x int fa 0/2
How to test
Power-on your Windows 7 client computer and configure the correct authentication method. When
restart your Windows 7 client, the client sends an authentication request. If authentication is
successful, the client computer receives an IP address from your DHCP server. If the client computer
is a member of Wired Computers VLAN 10, the client receives an IP address from the network range
10.32.10.50-60.
If authentication fails, the client becomes a member of VLAN 99 and receives an IP address in the
range of 10.32.99.50-60
Configuring Wired 802.1x Authentication on Windows Server 2012
89
If the client computer is successfully authenticated, you receive an IP address from VLAN 10
After authorization, you receive following message for PEAP-EAP-TLS authentication:
VLAN database
Configuring Wired 802.1x Authentication on Windows Server 2012
90
If the client computer fails authentication, you receive an IP address from VLAN 99
If the authentication method is not compatible, the client becomes a member of the
authentication fail VLAN
Configuring Wired 802.1x Authentication on Windows Server 2012
91
Per User ACL
Configuring Wired 802.1x Authentication on Windows Server 2012
92
Appendix A: Security Groups
Group
Autoenroll Server
Authentication Certificate
Autoenroll Client
Authentication Certificate
Wired Computers VLAN 10
Wired Computers VLAN 20
Description
Members of this group receive a certificate with the
purpose of server authentication
Members of this group receive a certificate with the
purpose of client authentication
Members of this group are placed into VLAN 10
Members of this group are placed into VLAN 20
Configuring Wired 802.1x Authentication on Windows Server 2012
93
Appendix B: Switch Configuration
sh run
Building configuration...
Current configuration : 3581 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname addevsw01
!
boot-start-marker
boot-end-marker
!
!
!
username cisco password 0 cisco
aaa new-model
!
!
aaa authentication dot1x default group radius
aaa authorization network default group radius
!
!
!
!
aaa session-id common
system mtu routing 1500
ip routing
ip domain-name addev.local
!
!
!
!
!
crypto pki trustpoint TP-self-signed-1081864448
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1081864448
revocation-check none
rsakeypair TP-self-signed-1081864448
!
!
crypto pki certificate chain TP-self-signed-1081864448
certificate self-signed 01
3082024D 308201B6 A0030201 02020101 300D0609 2A864886
31312F30 2D060355 04031326 494F532D 53656C66 2D536967
69666963 6174652D 31303831 38363434 3438301E 170D3933
30315A17 0D323030 31303130 30303030 305A3031 312F302D
4F532D53 656C662D 5369676E 65642D43 65727469 66696361
36343434 3830819F 300D0609 2A864886 F70D0101 01050003
8100BF82 23C594F7 C1F04979 E31E819E CFA7B323 F1D827C3
9DC25434 E0E63342 95253F16 5A721C51 EAA30216 8B8320A7
42CB097A 3F8C2A13 21B0C676 51C7B00C C5D781EF 03AA038E
9F3A6698 2921AE8F D2C84E5F 8D436AEC 8046208A DB718804
4D0F0203 010001A3 75307330 0F060355 1D130101 FF040530
551D1104 19301782 15616464 65767377 30312E61 64646576
Configuring Wired 802.1x Authentication on Windows Server 2012
F70D0101
6E65642D
30333031
06035504
74652D31
818D0030
64211110
C7573A55
BC3E8946
5061306E
030101FF
2E6C6F63
04050030
43657274
30303031
03132649
30383138
81890281
15FD804F
684B9F77
7AE41C17
921D0A44
30200603
616C301F
94
0603551D 23041830 1680149F 143D56F9 389C6F81 F05B0DAE
1D060355 1D0E0416 04149F14 3D56F938 9C6F81F0 5B0DAE8B
06092A86 4886F70D 01010405 00038181 00851ACE F2C9718D
704D9DCD 2D6D49FF F3321FA1 42901F2A CFD3B18D 13064E95
53741A11 5FC49F57 4D566F5E A838163D 6408D122 F3A8FE7F
25E8D40D 54915FEA 16309073 79A433C7 B45C2E08 B30198F3
1F67D8B0 C537D680 744EAFD0 FBF60449 AD
quit
dot1x system-auth-control
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
ip ssh version 2
!
!
!
!
!
!
interface FastEthernet0/1
switchport access vlan 5
switchport mode access
!
interface FastEthernet0/2
switchport mode access
authentication event fail action authorize vlan 99
authentication event no-response action authorize vlan
authentication port-control auto
authentication periodic
authentication timer reauthenticate 60
dot1x pae authenticator
!
interface FastEthernet0/3
!
interface FastEthernet0/4
!
interface FastEthernet0/5
!
interface FastEthernet0/6
!
interface FastEthernet0/7
!
interface FastEthernet0/8
!
interface GigabitEthernet0/1
!
interface Vlan1
no ip address
!
interface Vlan5
ip address 10.32.5.254 255.255.255.0
!
interface Vlan10
ip address 10.32.10.254 255.255.255.0
ip helper-address 10.32.5.15
!
Configuring Wired 802.1x Authentication on Windows Server 2012
8B693799
69379998
5DBA2B67
B116D74C
D99F6422
83784498
98893530
8935300D
DF48378D
E943DA73
AA67F077
0788ACFD
100
95
interface Vlan99
ip address 10.32.99.254 255.255.255.0
ip helper-address 10.32.5.15
!
interface Vlan100
ip address 10.32.100.254 255.255.255.0
ip helper-address 10.32.5.15
!
ip http server
ip http secure-server
!
!
!
logging esm config
access-list 101 deny
tcp any host 10.32.5.3 eq www
access-list 101 permit ip any any
!
!
radius server addevdc01
address ipv4 10.32.5.15 auth-port 1812 acct-port 1813
key accessdenied
!
!
!
!
line con 0
line vty 0 4
password cisco
transport input ssh
line vty 5 15
password cisco
transport input ssh
!
end
addevsw01#
Configuring Wired 802.1x Authentication on Windows Server 2012
96
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising