User`s Guide
User’s Guide
QT5-0006-V07
XXXXXXXX
©CANON INC.2005
PRINTED IN THAILAND
User’s Guide
ENG
QT5-0006-V07
Getting Help from Canon
Help Us Help You Better
Before you contact Canon, please record the following information.
Serial Number (located inside the machine): ___________________________
Model Number (located on the front of the machine): ____________________
Machine Driver CD-ROM number (located on the CD-ROM): ______________
Purchase Date:__________________________________________________
Customer Technical Support Sequence*
1. Internet — www.canontechsupport.com
For quick and comprehensive self-help in an intuitively guided interactive troubleshooting
environment, the place to start is our helpful tech support web site. In addition, the latest
driver downloads, answers to frequently asked questions, product information, and
“where to buy” instructions are found here.
2. Email Tech Support —
www.canontechsupport.com
For individual attention to a special issue, try emailing our friendly technical engineers,
specially trained to communicate quick, easy, and logical solutions to your inquiries within
24 hours.
3. Toll-Free Live Tech Support — (1-800-828-4040)
This option provides live telephone technical support, free of service charges, MondaySaturday (excluding holidays), during your product’s 1 year limited warranty period. Telephone Device for the Deaf (TDD) support is available at (1-866-251-3752).
4. Extended Service and Support — www.canonesp.com
Canon CarePAK Extended Service Plan is a cost-attractive and easy-to-use extended
service program that provides up to three full years of service and support coverage at a
very attractive price. CarePAK offers toll-free Canon technical support and includes
Canon’s superb InstantExchange product replacement program. For further information
about extending your Canon service and support, call (1-800-385-2155), or visit our Web
site at www.canonesp.com. CarePAK must be purchased during your product’s warranty period.
For more information and updated program specifics, please visit our web site at
www.canontechsupport.com.
* Support program specifics are subject to change without notice.
Ordering Information
For additional supplies, use the following descriptions and order numbers.
Description
Order #
Ink Tanks
PGI-5 Black
CLI-8 Black
CLI-8 Cyan
CLI-8 Magenta
CLI-8 Yellow
CLI-8 Photo Cyan
CLI-8 Photo Magenta
0628B002
0620B002
0621B002
0622B002
0623B002
0624B002
0625B002
Canon Specialty Papers
Photo Paper Plus Glossy (4" x 6" / 20 sheets)
Photo Paper Plus Glossy (4" x 6" / 50 sheets)
Photo Paper Plus Glossy (4" x 6" / 120 sheets)
Photo Paper Plus Glossy (5" x 7" / 20 sheets)
Photo Paper Plus Glossy (8.5" x 11" / 20 sheets)
Photo Paper Plus Double Sided (5" x 7" / 10 sheets)
Photo Paper Plus Double Sided (8.5" x 11" / 10 sheets)
Photo Paper Plus Double Sided Album Kit (5" x 7")
Photo Paper Plus Double Sided Album Kit (8.5" x 11")
Photo Paper Plus Semi-Gloss (4" x 6" / 50 sheets)
Photo Paper Plus Semi-Gloss (8.5" x 11" / 20 sheets)
Photo Paper Pro for Borderless Printing (4" x 6" / 20 sheets)
Photo Paper Pro for Borderless Printing (4" x 6" / 75 sheets)
All Occasion Photo Cards (4" x 8" / 50 sheets)
Photo Paper Pro (8.5" x 11" / 15 sheets)
Photo Paper Pro (8.5" x 11" / 30 sheets)
Matte Photo Paper (8.5" x 11" / 50 sheets)
Photo Paper Glossy (4" x 6" / 50 sheets)
Photo Paper Glossy (4" x 6" / 100 sheets)
Photo Paper Glossy (8.5" x 11" / 50 sheets)
Photo Paper Glossy (8.5" x 11" / 100 sheets)
Glossy Photo Paper Credit Card Size
Transparencies (8.5" x 11" / 50 sheets)
High Resolution Paper (8.5" x 11" / 100 sheets)
7980A007
7980A012
7980A022
7980A019
7980A006
9981A006
9981A005
0041B005
0041B006
8386A010
8386A007
1029A014
1029A027
1029A055
1029A004
1029A028
7981A004
0775B021
0775B022
0775B023
0775B024
9157A023
1043A004
1033A011
Call 1-800-OK-CANON to locate a dealer near you, or visit the Canon eStore at
www.estore.usa.canon.com.
© 2006 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and may be a registered
trademark or trademarks in other countries. All other product and brand names are trademarks of their respective owners. As an ENERGY STAR® partner, Canon U.S.A., Inc. has determined that this product meets the ENERGY STAR®
guidelines for energy efficiency.
Table of Contents
Copyright ........................................................3
Disclaimer .......................................................3
Model Name ...................................................3
Trademarks.....................................................4
How to Use the Documentation Provided.........4
Safety Precautions ...........................................5
Reading the Document...................................10
Symbols Used in This Guide ........................10
Legal Limitations on Use of Your Product
and Use of Images .........................................11
1
Before Printing .......................................12
Main Components and Their Functions........12
Turning the Machine ON and OFF ...............17
Loading Documents to Copy or Scan ...........18
Loading Paper ..............................................19
Changing the Print Settings ..........................34
2
Copying...................................................38
Making Copies ..............................................38
Changing the Copy Settings .........................40
Using Useful Copy Functions .......................40
3
Printing from a Memory Card................45
Using the Memory Card................................45
Printing Photograph ......................................48
Other Useful Functions .................................51
4
Photo Printing from Photo or Film .......61
Scanning a Photo .........................................61
Scanning a Film ............................................62
Printing Photographs ....................................67
Other Useful Functions .................................69
5
Printing Photographs Directly from a
Compliant Device ...................................71
Connecting to a PictBridge Compliant
Device...........................................................71
Printing Photographs Directly from a
PictBridge Compliant Device ........................73
Printing Photographs Directly from a
Canon Bubble Jet Direct Compatible
Digital Camera ..............................................76
6
Printing Photographs from a Wireless
Communication Device .........................78
Setting the Page Size, Media Type, and
Layout When Printing from a Mobile
Phone ...........................................................78
Performing Infrared Communication.............79
Performing Bluetooth Communication ..........81
7
Printing from Your Computer ...............83
Printing with Windows...................................83
Printing with Macintosh................................. 85
8
Scanning Images ................................... 88
About Scanning Images ............................... 88
Scanning Methods........................................ 88
9
Reading from and Writing to a
Memory Card.......................................... 91
Setting up the Card Slot as the Memory
Card Drive of the Computer.......................... 91
10 Changing the Machine Settings ........... 92
The Print Settings ......................................... 93
Wireless Print Settings ................................. 94
Bluetooth Settings ........................................ 94
Other Settings............................................... 95
Language selection ...................................... 95
Reset setting................................................. 95
Save settings ................................................ 95
Load settings ................................................ 95
11 Routine Maintenance ............................ 96
Replacing an Ink Tank.................................. 96
Getting the Ink Level Information.................. 97
Knowing When to Replace Ink Tank ............ 97
Replacing Ink Tanks ..................................... 98
Keeping the Best Printing Results .............. 101
When Printing Becomes Faint or Colors
are Incorrect ............................................... 102
Cleaning Your Machine .............................. 109
12 Troubleshooting .................................. 113
An Error Message is Displayed on the
LCD ............................................................ 115
Cannot See the Display Properly on the
LCD/Cannot See the Display on the LCD .. 117
Cannot Scan Films ..................................... 118
Ink Does Not Come Out/Printing is Blurred/
Colors are Wrong/White Streaks/Straight
Lines are Misaligned/Cannot Print to End of
Job.............................................................. 119
Back of Paper is Smudged/Paper Does
Not Feed Properly/Printed Surface is
Scratched ................................................... 123
Paper Jams ................................................ 127
Cannot Print Properly from a Photo Index
Sheet .......................................................... 130
Cannot Print Properly from the Digital
Camera....................................................... 130
Cannot Print Properly through Wireless
Communication........................................... 133
Cannot Install the MP Drivers..................... 134
Cannot Connect to the Computer
Properly ...................................................... 135
Problems Scanning .................................... 136
1
Cannot Scan Films .....................................140
An Error Message Appears on the
Screen ........................................................141
If You Cannot Resolve the Problem ...........145
13 Appendix...............................................146
Printing Area ...............................................146
How to Read the On-screen Manuals.........148
Uninstalling the On-screen Manuals...........148
Transporting Machine .................................149
Specifications..............................................149
Users in the U.S.A. .......................................154
FCC Notice .................................................154
Mercury Legislation.....................................154
Canon U.S.A., Inc. Limited Warranty
- U.S. Only ..................................................155
Users in Canada...........................................158
Customer Technical Supports ....................158
Index ............................................................159
2
Canon MP950 User ’s Guide
Copyright
This manual is copyrighted by Canon Inc. with all rights reserved.
Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without
the prior written consent of Canon Inc.
© 2005 Canon Inc.
Disclaimer
Canon Inc. has reviewed this manual thoroughly in order that it will be an easy-to-use guide to your
Canon MP950 Series. All statements, technical information and recommendations in this manual
and in any guides or related documents are believed reliable, but the accuracy and completeness
thereof are not guaranteed or warranted, and they are not intended to be, nor should they be
understood to be, representation or warranties concerning the products described.
Specifications are subject to change without notice.
As an ENERGY STAR partner, Canon Inc., has determined that this product
meets the ENERGY STAR guidelines for energy efficiency.
All information regarding non-Canon products was compiled from publicly available information. No
representation is made regarding the accuracy thereof.
This machine supports Exif 2.2 (also called “Exif Print”).
Exif Print is a standard for enhancing the communication between digital cameras
and printers.
By connecting to an Exif Print-compliant digital camera, the camera’s image data
at the time of shooting is used and optimized, yielding extremely high quality
prints.
Model Name
K10266 (PIXMA MP950)
3
Trademarks
z "Windows" and "Internet Explorer" are trademarks of Microsoft Corporation, registered in the
United States and other countries.
z "Macintosh" and "Mac" are trademarks of Apple Computer, Inc., registered in the U.S. and other
countries.
z "SmartMedia" is a trademark of Toshiba Corporation.
z "MEMORY STICK", "Memory Stick PRO", "MEMORY STICK Duo" and "Memory Stick Pro Duo"
are trademarks of Sony Corporation.
z "xD-Picture Card" is a trademark of Fuji Photo Film Co., Ltd.
z "MultiMediaCard" is a trademark of Infineon Technologies AG.
z "SD Secure Digital memory card" and "miniSD Card" are trademarks of SD Association.
z "IrDA Feature Trademark" is owned by the Infrared Data Association and used under license
therefrom.
z "Bluetooth" is a trademark of Bluetooth SIG, Inc.,U.S.A. and are licensed to Canon Inc.
z Specifications are subject to change without notice.
How to Use the Documentation Provided
Easy Setup Instructions
(Printed documentation)
Be sure to read this sheet first.
This sheet includes instructions for setting up your machine and getting
it ready for use.
User’s Guide
(This guide)
Read this guide when starting to use the machine.
After following instructions in the Easy Setup Instructions, read this
guide for instructions on printing from your computer, direct photo
printing from selected digital cameras, copying, and scanning.
On-screen Manuals
Refer to these guides as needed for full instructions on some of the
more advanced features.
Printer Driver Guide
Refer to this guide for full instructions on setting the printer driver.
Scan Guide
Refer to this guide for full instructions on scanning operation and
settings.
Photo Application Guide
Refer to this guide for instructions on using various application
software included on the Setup CD-ROM.
Bluetooth User’s Guide
Refer to this guide for full instructions on printing from computers and
devices that support Bluetooth communication, and on troubleshooting
them.
4
Safety Precautions
Please read the safety warnings and cautions provided in this guide to ensure that you use your
machine safely. Do not attempt to use the machine in any way not described in this guide.
Warning
You may cause an electric shock/fire or damage the machine if you ignore any of
these safety precautions.
Location
Do not place the machine close to flammable solvents such as alcohol or thinners. If
flammable substances come into contact with electrical parts inside the machine, it may
result in fire or electrical shock.
Power supply
Never attempt to plug or unplug the machine from the power supply when your hands are
wet. This may result in electrical shock.
Always push the plug all the way into the power outlet. If the prongs of the power plug
come into contact with metal objects, it may result in fire or electrical shock.
Never damage, modify, stretch or excessively bend or twist the power cord. Do not place
heavy objects on the power cord. These actions may cause electrical damage and result in
fire or electrical shock.
Never plug the machine into a power socket that is shared with other equipment (extension
lead/cord, 2- or 3-way adapter, etc.). This may result in fire or electrical shock.
Plug the machine into a standard 110-120 V AC, 50/60 Hz or 200-240 V AC, 50/60 Hz,
(depending on your local electrical requirements), two-prong* grounded outlet. Operate the
machine only from the type of power source indicated on the machine’s label or a fire,
electrical shock, or malfunction may occur. If you are unsure of the type of power available,
consult your local power company.
* The shape of the plug and outlet may vary depending on the country of purchase.
Do not allow the power cord to be near objects that emit heat. The outer cover of the power
cord may melt resulting in fire or electrical shock.
Never use the machine if the power cord is bundled or knotted. Knots in the cord may
result in fire or electrical shock.
If you detect smoke, unusual smells or strange noises around the machine, immediately
unplug the machine at the power supply and contact the Canon Customer Care Center.
Using the machine in such conditions may result in fire or electrical shock.
Periodically, unplug the machine and use a dry cloth to wipe off any dust or dirt collected
on the plug and the power outlet.
If the machine is placed at a location exposed to a lot of dust, smoke, or high humidity, the
dust collected on the plug absorbs moisture and may cause insulation failure and fire.
Maintenance
Do not service the machine yourself except as specifically described in this guide. If further
servicing is required, contact the Canon Customer Care Center.
When storing the machine, choose a location where the machine is not exposed to dust.
Dust accumulation may prevent the machine from operating properly.
Use a damp cloth to clean the machine. Never use flammable solvents such as alcohol,
benzene or thinners. If flammable solvents come in contact with electrical components
inside the machine, it could cause a fire or electrical shock.
Always turn OFF the power and unplug the machine from the power outlet before cleaning
the machine.
If you leave on or accidentally switch the machine ON while cleaning it, it may result in
injury or damage the machine.
5
Handling
Do not attempt to disassemble or modify the machine. There are no user serviceable parts
inside the machine.
The machine contains high-voltage components. Never attempt any maintenance
procedure not described in this guide. Incorrect maintenance procedures may damage the
machine, or cause a fire or electrical shock.
Do not drop paper clips, staples, or other metal objects inside the machine. Also do not
spill water, liquid, or flammable substances inside the machine. If these items come into
contact with high-voltage parts inside the machine, it may result in fire or electrical shock.
If these items are dropped or spilled in the machine, turn OFF the power and unplug the
power cord immediately with dry hands. Then contact the Canon Customer Care Center.
Do not use flammable sprays near the machine.
This could cause a fire or electrical shock if the spray comes into contact with electrical
components inside the machine.
There are high-voltage components inside the machine. If you are looking inside the
machine to clear paper jams etc., do not allow metal objects such as jewelry to come into
contact with the inside of the machine. Contact may result in burns or electrical shock.
Others
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel
abnormalities, please move away from this product and consult your doctor.
When setting the machine near electric products with fluorescent lighting, separate the
machine at least 5.9 inches (15 cm) from electric products equipped with fluorescent
lighting. If you place it near to them, the machine may malfunction as a result of the noise
emitted by the fluorescent lighting.
When turning OFF the power, be sure to press [ON/OFF] and confirm that the Alarm Lamp
has shut off. If you pull the power plug out of the wall outlet while the Alarm Lamp is lit or
flashing, the Print Head is not protected, and you may not be able to print later.
Caution
Location
You may cause injury or damage the machine if you ignore any of these safety
precautions.
Do not block or cover the ventilation port or any openings on the machine with objects, as
it may cause the inside of machine to overheat and cause a fire.
Place the machine on a flat, stable, vibration-free surface that is strong enough to support
its weight. If the machine topples over, it may result in injury. (For the weight of the
machine, see “Appendix” on page 146.)
Do not use or store the machine outdoors.
Do not install the machine near devices that contain magnets or generate magnetic fields,
such as speakers.
To ensure proper ventilation, make sure the machine is approximately 4 inches (10 cm)
away from walls and other equipment.
Do not install the machine in a location that is very humid or dusty, in direct sunlight,
outdoors, or close to a heating source.
Installing in such a location may result in fire or electrical shock.
To avoid the risk of fire or electrical shocks, install the machine in a location with an
ambient temperature range of 41°F to 95°F (5°C to 35°C) and humidity of 10% to 90%
(condensation free).
Do not place the machine on a thick rug or carpet.
If fibers or dust come inside the machine, it could cause a fire.
6
Power supply
Never remove the plug by pulling on the cord.
Pulling on the power cord may damage the cord and cause a fire or electrical shock.
When turning OFF the power, be sure to press [ON/OFF] or unplug the machine.
However, if the machine is unplugged during printing, the Print Head is not protected with
the cap that prevents the ink from drying. This may affect the print quality of the machine
when printing later.
During electrical storms, turn OFF the power and disconnect the power cord from the
power outlet.
Do not use an extension cord as this may result in fire or electrical shock.
Ensure that the area around the power outlet is kept clear at all times so you can easily
unplug the power cord if necessary. Otherwise you will be unable to disconnect the power
plug in case of an emergency, and it may result in fire or electrical shock.
Never use a power supply source other than the one rated for the machine in the country
where you purchased the machine as it may result in fire or electrical shock.
The operating requirement of this machine is as follows:
110-120 V AC, 50/60 Hz or 200-240 V AC, 50/60 Hz (depending on local electrical
requirements)
Do not plug the machine into the same circuit as appliances such as an air conditioner,
television, or copier. These devices generate electrical noise which may interfere with your
machine’s operation.
Whenever you turn OFF the power and unplug the machine, wait at least five seconds
before you plug it in again.
Use only the power cord that came with the machine. Using a different power cord may
cause electric leakage or damage to the machine.
Turn OFF the power and unplug the machine in the following conditions:
z When the power cord or plug is damaged or frayed.
z If liquid has spilled into the machine.
z If the machine has been exposed to rain or water.
z If the machine does not operate normally when you have followed the instructions in the
guides included with your machine.
z If the machine does not operate normally when you have followed the instructions
provided in “Troubleshooting” on page 113.
z If the machine has been dropped or damaged.
z If the machine exhibits a distinct change in performance, indicating a need for servicing.
Turn OFF the power and disconnect the power cord if the machine will not be used for a
long period such as during holidays.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
7
Handling
Close the Document Cover gently to avoid catching
your hand. Failing to do so may result in personal
injury.
Do not press down hard on the Document Cover when
using the Platen Glass to scan thick books. This may
damage the Platen Glass and Document Cover and/or
result in personal injury.
Do not place the following objects on top of the machine. If such objects come into contact
with internal electrical components, the machine may short-circuit, resulting in fire or
electrical shock.
z Metal objects such as jewelry and watches
z Containers of water or other liquids such as glasses, vases, or pot plants
If water does spill inside the machine, turn OFF the power immediately by pressing [ON/
OFF], and disconnect the power cord. Then, contact the Canon Customer Care Center.
Do not touch the high-voltage electrical parts as this may result in electrical shock.
Do not place heavy objects on top of the machine as these may topple over and result in
injury.
When removing paper jammed in the machine, be careful not to get ink on your hands or
clothing. If ink gets on your hands or clothing, wash them soon in running water. If you use
hot water, the ink may adhere and become difficult to remove.
After printing, do not touch the electrical contacts of the Print Head. They will be hot and
may result in burns or electrical shock.
Do not subject the machine to strong physical shock or vibration. This can damage the
machine’s components.
Before moving the machine, turn OFF the power and unplug the machine.
When moving the machine, carry the machine at both
ends.
A distinct change in performance may indicate a need for servicing.
Do not insert your hands into the machine while it is printing.
Parts inside the machine are moving and this may result in injury.
Do not turn the machine upside down.
Ink may leak out and stain clothing or the surrounding area.
Adjust only those controls that are covered by the instructions in the guides since
improper adjustment of other controls may result in damage and require extensive repair
by a qualified technician to restore the product to normal operation.
When storing or transporting the machine, do not tilt it, stand it on its side, or turn it upside
down. Doing so may cause ink to leak out.
8
Print Head/Ink tanks
For safety reasons, store print heads and ink tanks out of the reach of small children.
If a child ingests any ink, consult a doctor immediately.
Do not shake print heads or ink tanks.
Ink may leak out and stain clothing or the surrounding area.
Never touch the Print Head.
9
Reading the Document
Symbols Used in This Guide
Please read the list below of symbols used in this guide. The following symbols are used to indicate
important instructions. Be sure to obey these instructions.
Warning
Indicates a warning concerning operations that may lead to death or injury
to persons if not performed correctly. In order to use the machine safely,
always pay attention to these warnings.
Caution
Indicates a caution concerning operations that may lead to injury to
persons or damage to property if not performed correctly. In order to use
the machine safely, always pay attention to these cautions.
Important
Indicates operational warnings and restrictions. Be certain to read these
items to operate the machine correctly and to avoid damage to the
machine.
Note
Indicates notes for operation or additional explanations. Reading these is
highly recommended.
Read this when the machine is connected to a Windows® system.
Read this when the machine is connected to a Macintosh® system.
10
Legal Limitations on Use of Your Product
and Use of Images
It may be unlawful to make copies of, scan, print or use reproductions of the following documents.
The list provided is non-exhaustive. When in doubt, check with a legal representative in your
jurisdiction.
z
z
z
z
z
z
z
Paper money
Money orders
Certificates of deposit
Postage stamps (canceled or uncanceled)
Identifying badges or insignias
Selective service or draft papers
Checks or drafts issued by governmental
agencies
z Motor vehicle licenses and certificates of
title
z
z
z
z
z
Traveler’s checks
Food stamps
Passports
Immigration papers
Internal revenue stamps (canceled or
uncanceled)
z Bonds or other certificates of indebtedness
z Stock certificates
z Copyrighted works/works of art without
permission of copyright owner
11
Chapter 1
Before Printing
Main Components and Their Functions
„ Front View
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(12)
(11)
(10) (9) (8)
(1) Operation Panel
Used to change the settings or operate the machine. See “Operation Panel Name and
Functions” on page 15.
(2) LCD (Liquid Crystal Display)
Displays messages, menu selections, and the operation status.
(3) Document Cover
Open this cover when loading a document on the Platen Glass.
(4) Paper Support
Supports paper loaded on the tray. Extend it before loading paper by putting your finger in
the rounded indent and pulling out the extension until it stops.
(5) Paper Guide
When loading paper, ensure that the left edge just touches this guide.
To move the Paper Guide, pinch the knob and slide in the appropriate direction.
(6) Auto Sheet Feeder
Load paper here before printing. Paper feeds automatically, one sheet at a time.
(7) Cover Guide
Align the right side of the paper to this guide.
(8) Card Slot Cover
Open to insert a memory card. For details, see “Inserting the Memory Card” on page 46.
(9) IrDA Port
Receives photo data sent from the mobile phone through infrared communication.
See “Performing Infrared Communication” on page 79.
12
Before Printing
Chapter 1
(10) Direct Print Port
Used when printing directly from a digital camera or a digital video camcorder or a mobile
phone equipped with a camera compatible with the machine.
When using optional Bluetooth Unit*, connect it to this port. Refer to the Bluetooth User's
Guide.
*The Bluetooth Unit is not available to some regions due to the law of the countries or the
regulations. For details, contact the Canon Customer Care Center.
(11) Paper Output Tray
Open this tray before copying or printing by pressing the Open button. However, even if it
is closed, the tray will open automatically when copying or printing is started.
Close the tray when it is not in use.
(12) Open Button
Press this button to open the Paper Output Tray.
(13)
(14)
(17)
(16)
(15)
(13) FAU (Film Adapter Unit) Protective Sheet
Protects the FAU Lamp and the Platen Glass. The film guides used for scanning in film
are stored at the rear.
Remove when performing Film Direct Print. Always attach this cover when copying or
scanning originals other than film originals (e.g., documents or photographs).
(14) FAU Lamp
Lights up the film original when scanning films.
(15) Cassette
Load paper to be used regularly here. Paper feeds automatically, one sheet at a time.
*Legal-sized paper and 2.13" x 3.39"/ 54.0 x 86.0 mm size paper are not loadable in the
Cassette.
(16) Scanner Lock Switch
Locks the internal fluorescent lamp that is located underneath the Platen Glass (scanning
lamp), to be used when transporting the machine. Make sure to unlock it before turning
the machine on.
(17) Platen Glass
Used to load a document to be processed.
Chapter 1
Before Printing
13
„ Rear View and Interior
(18)
(20)
(19)
(23)
(22)
(21)
(24)
(25)
(28)
(27)
(26)
(18) Print Head Lock Lever
Used to fix the Print Head.
Important
Do not pull up this lever after installing the Print Head.
(19) Scanning Unit (Printer Cover)
This is the unit used to scan documents. Open when replacing the ink tanks or clearing
jammed paper.
(20) Ink Tank Lamp
Lights or flashes red to indicate the status of the ink tank. You can check the status of
each ink tank according to the way its lamp flashes. See “Ink Tank Lamps” on page 15.
(21) Print Head Holder
Used to install a Print Head.
(22) Inner Cover
Open this cover when replacing the ink tanks.
(23) Card Slot
Set the memory card here. For details, see “Inserting the Memory Card” on page 46.
(24) Access Lamp
Lights when a memory card is inserted into the Card Slot. This lamp flashes while the
machine is reading or writing data from/to the memory card. For details, see “Inserting
the Memory Card” on page 46.
(25) Duplexing Transport Unit
Open when clearing jammed paper after pulling out the Cassette.
14
Before Printing
Chapter 1
(26) Power Connector
This is the connector used to connect the provided power cord.
(27) Rear Cover
Open when clearing jammed paper.
(28) USB Connector (for computer)
This is the connector used to connect the machine to a computer using a USB cable.
Important
While the machine is printing from or scanning images to the computer, or
the computer is in the sleep mode or standby mode, do not disconnect
and connect the USB cable.
z For information on how to install the Print Head and ink tanks, refer to
the Easy Setup Instructions.
Ink Tank Lamps
z You can check the status of each ink tank according to the way its
lamp flashes.
On: The machine is ready to print.
Slow flashing (about three seconds): Ink is low. Prepare a new ink
tank. For details, see “Getting the Ink Level Information” on page 97.
Fast flashing (about one second): Ink tank is empty, or the machine is
not ready due to an error.
Off: Make sure all the ink tanks are installed properly. If an Ink Tank
Lamp remains unlit even after reinstalling ink tanks, an error has
occurred and the machine is not ready to print.
Note
„ Operation Panel Name and Functions
(1)
(2)
(3)
(4) (5)
(6)
(7)
(8)
(9)
(12) (13) (14) (15) (16) (17) (18) (19)
(10)
(20)
(11)
(21)
(1) [ON/OFF]
Turns the machine ON and OFF. Before turning ON the machine, make sure the
Document Cover is closed.
(2) Alarm Lamp
Lights or flashes orange, when an error occurs, or when paper or ink has run out.
(3) Cassette Lamp
Lit when the Cassette is selected.
(4) Auto Sheet Feeder Lamp
Lit when the Auto Sheet Feeder is selected.
(5) [Feed Switch]
Selects the paper source. Press this toggle switch to change the paper source between
the Auto Sheet Feeder and Cassette.
Chapter 1
Before Printing
15
(6) [Menu]
Used to display menus.
(7) [Settings]
Use to configure the page size, media type, and image correction settings.
(8) [Back]
Allows you to return to the previous screen.
(9) [Search]
Looks up target photos in the memory card using the shooting date as the search key.
See “Searching for Photos with the Shooting Date (Search)” on page 51.
(10) [Trimming]
Use to crop the photo that is displayed. See “Printing a Specified Area (Trimming)” on
page 52.
(11) [Photo Index Sheet]
Switches to Photo Index Sheet mode. See “Printing by Using the Photo Index Sheet” on
page 57.
(12) [COPY]
Switches the machine to Copy mode.
(13) [SCAN]
Switches the machine to Scan mode. This button is used when the machine is connected
to a computer. (Refer to the Scan Guide.)
(14) [PHOTO/FILM]
Switches the machine to Photo/film mode.
(15) [MEMORY CARD]
Switches the machine to Memory card mode.
(16) [OK]
Finalizes your selection for the menu or setting item.
Restores the machine to normal operation after a printing error was resolved, or if paper
jams are cleared.
(17) [ ] [ ] [ ] [ ]
Scroll through menu selections, and increase or decrease the number of copies. You can
use these buttons when [ ], [ ], [ ], and [ ] are displayed on the LCD.
(18) Power Lamp
Lights or flashes green to indicate whether power is ON/OFF.
(19) [Black]
Starts black & white copying, or photo scanning.
(20) [Color]
Starts color copying, photo printing, or scanning.
(21) [Stop/Reset]
Cancels operations. If this button is pressed during printing, the machine aborts printing.
16
Before Printing
Chapter 1
Turning the Machine ON and OFF
Turn on the machine before starting printing.
„ Turning on the Machine
Before turning on the machine, confirm that the Print Head and ink tanks are set into place.
Note
1
If preparatory operations above are not yet finished, follow the Easy
Setup Instructions to complete them.
Open the Operation Panel, then press [ON/OFF].
The Power Lamp flashes green for a while, and then turns on.
Note
If the Alarm Lamp lights or flashes orange and an error message is
displayed on the LCD, see “An Error Message is Displayed on the LCD”
on page 115.
„ Turning off the Machine
1
To turn off the machine, press [ON/OFF].
The machine is off when the Power Lamp stops flashing and all Operation Panel lamps are
off.
Important
When removing the power plug after turning off the machine, be sure to
check that all the lamps on the Operation Panel are not lit. If the power
plug is removed from the wall outlet with the lamps on the Operation
Panel lit or blinking, the machine cannot protect its Print Head and may
be unable to print.
See “Keeping the Best Printing Results” on page 101.
„ Setting the Power Save Mode
The machine enters Power save mode if not operated for a certain interval. In the Power save
mode, the internal fluorescent lamp are turned off, and the selected Mode Lamp and the
Power Lamp stay lit. You can configure the interval that the machine waits before entering
Power save mode. See “Power save setting” on page 95.
When you try to copy or scan, the machine will exit from Power save mode.
If you use the machine frequently, we recommend that you set the Power save transfer time
to 1 hour or 8 hours.
„ The Screen-saver Mode
The LCD goes out if the machine is not operated for 5 minutes. Press any button to restore
the display. You cannot change the period before the LCD goes out.
Chapter 1
Before Printing
17
Loading Documents to Copy or Scan
This section describes how to load the document on the Platen Glass.
„ Document Requirements
The documents you load on the Platen Glass for copying or scanning must meet these
requirements:
Document
type
z Documents
z Photographs
z Book
* For details on positive and negative 35 mm film strip and 35 mm slides, see “Photo
Printing from Photo or Film” on page 61.
Size (W x L)
Max. 8.5" x 11.7" / 216 x 297 mm
Thickness
Max. 0.8" / 20 mm
„ Loading Documents
Load documents that you want to copy or scan on the Platen Glass. For how to load a photo,
see “Scanning a Photo” on page 61. For how to load a film, see “Scanning a Film” on page 62.
Note
1
2
Make sure any glue, ink, correction fluid, or the like is completely dry
before loading the document on the Platen Glass.
Lift the Document Cover.
Load your document on the Platen Glass.
z Place your document face down on the Platen Glass.
z Align the upper left corner of your document with the alignment mark on the upper left
corner of the Platen Glass.
18
Before Printing
Chapter 1
z The machine cannot scan the area within about 0.04" / 1 mm from the
rear edge, and within about 0.04" / 1 mm from the left edge of the
Platen Glass.
z You can also scan in originals that are up to 0.8" / 20 mm thick, such
as books. Set them on the Platen Glass in the same way as
documents.
Note
3
Gently close the Document Cover.
Loading Paper
This section describes how to load paper in the Auto Sheet Feeder and the Cassette.
„ Paper Handling
z Recommended Paper and Requirements
Media Type
Model*1
Paper Support Load Limit
Auto Sheet Feeder
Cassette
Printer Driver
Setting for
[Media Type]
0.52"/13 mm
0.52"/13 mm
[Plain Paper]
80 sheets (A4, Letter)
[High Resolution
Paper]
Plain Paper
—
High
Resolution
Paper
HR-101N 80 sheets (A4, Letter)
Super White
Paper
SW-201
0.52"/13 mm (A4, Letter) 0.52"/13 mm (A4,
Letter)
[Plain Paper]
Glossy Photo
Paper
GP-401
10 sheets (A4, Letter),
20 sheets (4" x 6" /
101.6 x 152.4 mm,
Credit Card)
10 sheets (A4, Letter),
20 sheets (4" x 6" /
101.6 x 152.4 mm), Not
supported (Credit
Card)*5
[Glossy Photo
Paper]
Glossy Photo
GP-501
Paper
“Everyday Use”
10 sheets (A4),
20 sheets (4" x 6" /
101.6 x 152.4 mm)
10 sheets (A4),
20 sheets (4" x 6" /
101.6 x 152.4 mm)
[Glossy Photo
Paper]
Matte Photo
Paper
10 sheets (A4, Letter),
20 sheets (4" x 6" /
101.6 x 152.4 mm)
10 sheets (A4, Letter),
20 sheets (4" x 6" /
101.6 x 152.4 mm)
[Matte Photo
Paper]
Chapter 1
MP-101
Before Printing
19
Media Type
Paper Support Load Limit
Model*1
Auto Sheet Feeder
Cassette
Printer Driver
Setting for
[Media Type]
Photo Paper
Plus Double
Sided*2, *3
PP-101D 10 sheets (A4, Letter, 5" 10 sheets (A4, Letter, 5" [Photo Paper
x 7" / 127.0 x 177.8
x 7" / 127.0 x 177.8
Plus Double
mm)
mm)
Sided]
Photo Paper
Plus Glossy*3
PP-101
10 sheets (A4, Letter, 5"
x 7" / 127.0 x 177.8
mm),
20 sheets (4" x 6" /
101.6 x 152.4 mm)
10 sheets (A4, Letter, 5" [Photo Paper
x 7" / 127.0 x 177.8
Plus Glossy]
mm),
20 sheets (4" x 6" /
101.6 x 152.4 mm)
Photo Paper
Plus Semigloss*3
SG-101
10 sheets (A4, Letter),
20 sheets (4" x 6" /
101.6 x 152.4 mm)
10 sheets (A4, Letter),
20 sheets (4" x 6" /
101.6 x 152.4 mm)
[Photo Paper
Plus Glossy]
Photo Paper
Pro*3
PR-101
10 sheets (A4, Letter),
20 sheets (4" x 6" /
101.6 x 152.4 mm)
10 sheets (A4, Letter),
20 sheets (4" x 6" /
101.6 x 152.4 mm)
[Photo Paper
Pro]
Photo
Stickers*4
PS-101
1 sheet
Not loadable*5
[Photo Paper
Plus Glossy]
30 sheets
30 sheets
[Transparencies]
Transparencies CF-102
T-Shirt
Transfers*2
TR-301
1 sheet
1 sheet
[T-Shirt
Transfers]
Envelopes*2
—
10 envelopes
5 envelopes
[Envelope]
Paper having a "Model Number" is Canon specialty media.
You may not be able to purchase some Canon branded paper depending on your country.
*1
Paper is not sold in the US by Model Number. Purchase paper by the name.
*2
This is available only when printing from your computer.
*3
When loading a stack of paper, the printed side may be marked when it is fed in. If this
happens, load paper one sheet at a time.
*4
When Windows is being used, you can specify the print setting easily by using the Easy-Photo
Print provided with the Setup CD-ROM.
*5
Feeding from the Cassette can damage the machine. Always load in the Auto Sheet Feeder.
Note
20
z For specifying the page size and media type when performing copy
direct printing, see “Changing the Print Settings” on page 34.
z For specifying the page size and media type when printing photos
saved on mobile phones, see “Setting the Page Size, Media Type, and
Layout When Printing from a Mobile Phone” on page 78.
z When using plain paper (64 gsm or 17 lb), up to 150 sheets (13 mm or
0.52 inches in height) can be loaded in the Auto Sheet Feeder and
Cassette respectively. Select [Plain Paper] from [Media Type] in the
printer driver.
For a detailed description of printing media types, refer to the Printer
Driver Guide.
Before Printing
Chapter 1
z Media types you cannot use
Do not use the following types of paper. Using such paper will not only produce unsatisfactory
results, but can also cause the machine to jam or malfunction.
z Folded, curled or wrinkled paper
z Damp paper
z Excessively thin paper (less than 64 gsm or 17 lb)
z Excessively thick paper* (more than 105 gsm or 28 lb)(non-Canon branded paper)
z Picture postcards
z Postcards affixed with photos or stickers
z Envelopes with double flaps
z Envelopes with sticker flaps
z Envelopes with an embossed or treated surface
z Any type of paper with holes
z Handling paper
z Hold the paper as closely as possible to its edges and try not to touch the print surface. Print
quality will deteriorate if the print surface is damaged or becomes dirty.
z Do not touch the print surface until the ink has dried. If prints get wet, do not touch the printed
side until they dry.
z Paper may curl or the print surface may become smudged if you use a large amount of ink for
printing. In this case, select <ON> for <Prevent paper abrasion> under <Device settings>.
See “If printing surface abrasion is not resolved even after taking the actions above:” on
page 126. Do not print photos or documents that contain graphics on paper that curls easily.
Remove this kind of paper for printing text-only documents.
z If the paper is curled, uncurl it before printing. To uncurl the paper, see “Paper is curled.” on
page 125.
z Put unused paper back into the package, and store them out of direct sunlight in a place
where the temperature and humidity are low. Keep them on a level surface to avoid curling
and wrinkling.
z If the printed area is traced with a highlight pen or paint-stick or stained with water or sweat,
ink may blur depending on the paper.
z Photo Paper Pro guidelines
z Do not touch the print surface until the ink is dry (approx. 30 minutes). Colors in dark images
may appear indistinct at first, but will become clearer after approx. 30 minutes.
z Images may become smudged if you place them in an album before the ink is completely dry.
It is recommended that you allow the ink to dry for 24 hours.
z Do not attempt to dry the ink with a hair dryer or by exposing printouts to direct sunlight.
z Do not store or display printouts in hot, damp, or humid conditions. Never expose them to
heat or direct sunlight.
z Store printouts in photo albums, photo frames, or presentation binders to protect them from
direct exposure to air or sunlight.
z Do not mount printouts in an adhesive-type album as you may not be able to remove them.
z Be aware that some types of clear plastic folders and albums may cause the edges of the
paper to turn yellow.
Chapter 1
Before Printing
21
„ About the Auto Sheet Feeder and the Cassette
You can load paper in both the Auto Sheet Feeder and Cassette.
Loading paper in the Auto Sheet Feeder is easy, and is convenient if you frequently switch to
and print on various sizes or types of paper.
Loading paper in the Cassette allows you to print without reloading paper for each job. This is
convenient for loading a certain type of paper, such as plain paper, you regularly print onto.
Loading paper in both the Auto Sheet Feeder and Cassette makes the following paper feed
methods available:
* Some types of paper cannot be used on the Cassette. See “Recommended Paper and
Requirements” on page 19.
z Changing the paper source to feed different types/sizes of paper
If you load plain paper in the Cassette and photo paper in the Auto Sheet Feeder, changing the
paper source allows you to print on both types of paper without removing and reloading paper.
To change the paper source, use [Feed Switch] on the machine or printer driver.
You can also specify the type/size of paper to be fed from the Cassette for regular use with the
printer driver. For example, you can specify that Letter-sized plain paper is always fed from the
Cassette whenever you print.
Note
z For information on page size, media type, and paper support load limit
for Auto Sheet Feeder or Cassette, see “Recommended Paper and
Requirements” on page 19.
z For information on the printer driver settings, refer to the Printer Driver
Guide.
(A)
(A) You can switch between paper loaded in the Auto Sheet Feeder (e.g., 4" x 6" / 101.6 x 152.4
mm) or the Cassette (e.g., A4/Letter-sized paper).
z Continuous printing on the same type/size of paper by using both the
Auto Sheet Feeder and Cassette together
If the Auto Sheet Feeder or Cassette runs out of paper, the paper source automatically switches
to the other one. This is useful for printing onto a large volume of paper. To use this feature, you
can select this setting with the printer driver beforehand.
Important
22
z This feature can be used only when printing from a computer.
z This feature can be used only when paper of the same size and media
type are loaded in the Cassette and Auto Sheet Feeder.
Before Printing
Chapter 1
Note
z For information on page size, media type, and paper support load limit
for Auto Sheet Feeder or Cassette, see “Recommended Paper and
Requirements” on page 19.
z For information on the printer driver settings, refer to the Printer Driver
Guide.
(A)
(A) If the Auto Sheet Feeder runs out of paper, the paper source automatically changes to the
Cassette.
„ Changing the Paper Source
Before printing, confirm that the location where you have loaded paper is selected as a paper
source. Press [Feed Switch] to change the paper source.
(A)
(B)
(C)
(A) Auto Sheet Feeder Lamp
(B) [Feed Switch]
(C) Cassette Lamp
Note
Chapter 1
z Press [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when
feeding paper from the Auto Sheet Feeder and the Cassette Lamp is lit
when feeding paper from the Cassette.
z You can also select the paper source with the printer driver when
printing from the computer. For details, refer to the Printer Driver
Guide.
Before Printing
23
„ Loading the Print Media in the Auto Sheet Feeder
z Loading Paper
Note
1
Flatten the four corners of the paper before loading it.
Note
2
For detailed information on the specialty media Canon provides for use
with its various printers, see “Recommended Paper and Requirements”
on page 19.
z Align the edges of paper neatly before loading. Loading paper without
aligning the edges may cause paper jams.
z When paper is curled, hold the opposing curled corners and gently
bend them in the opposite direction until the paper becomes
completely flat. See “Paper is curled.” on page 125.
Prepare to load paper.
(1) Open the Paper Support, then pull out the Paper Support Extension to support the paper.
(2) Press the Open Button to open the Paper Output Tray.
(3) Pull out the Paper Output Tray Extension completely.
Note
After printing, to put back the Paper Output Tray Extension, push it back
while raising it a little.
(4) Press [Feed Switch] so that the Auto Sheet Feeder Lamp (A) lights.
(4)
(A)
(1)
(3)
(2)
Note
24
You can also select the paper source with the printer driver. For details,
refer to the Printer Driver Guide.
Before Printing
Chapter 1
3
Load the paper.
(1) Load the paper into the Auto Sheet Feeder with the print side facing UP.
(2) Align the paper stack against the Cover Guide on the right side of the Paper Support.
Important
Ensure that the Cover Guide stands when you load paper in the Auto
Sheet Feeder.
(3) Pinch the Paper Guide and slide it against the left side of the paper stack.
(A)
(1)
(2)
(3)
Important
Note
Chapter 1
Do not load the paper beyond this Load Limit Mark (A).
z You can use general copy paper or Canon’s Super White Paper SW201.
z You can load up to 150 sheets of plain paper (64 gsm or 17 lb, 13 mm
or 0.52 inches in height) in the Auto Sheet Feeder. However, the paper
may not be fed normally depending on its media type or your
environment where the temperature and humidity are high or low. In
that case, reduce the amount of paper to half (approx. 0.2" / 5 mm in
height).
z Remove the printed sheets from the Paper Output Tray before the
count reaches 50.
z Do not touch the printed surfaces until the ink dries. For specific drying
times, refer to the instructions packaged with your media.
Before Printing
25
z Loading Envelopes
Use either European DL or US Comm. Env. #10 size envelopes.
The address is rotated automatically to match the direction of the envelope when printing.
Important
1
Load the envelope against the Cover Guide on the right side of the Paper Support
with the print side facing UP, and the rear flaps DOWN on the left.
Important
Note
2
3
4
z Envelopes can be used only when printing from a computer.
z Do not use envelopes with embossed or treated surfaces, a double
flap, pressure seals or sticker flaps.
z Select either [DL Env.] or [Comm. Env. #10] according to the envelope
size you are using.
z The printed image will be upside down depending on the application. If
this occurs, open the printer properties dialog box then select the
[Rotate 180 degrees] check box on the [Page Setup] tab.
For information on the printer driver settings, refer to the Printer Driver
Guide.
Ensure that the Cover Guide stands when you load paper in the Auto
Sheet Feeder.
A maximum of 10 envelopes can be loaded at once.
Pinch the Paper Guide and slide it against the left side of the envelope.
Press [Feed Switch] so that the Auto Sheet Feeder Lamp lights.
Select [Envelope] in [Media Type], and then select [DL Env.] or [Comm. Env. #10] in
[Page Size].
For information on the printer driver settings, refer to the Printer Driver Guide.
(A)
1
2
3
(B)
Note
26
z Fold the envelope flap shut (A).
z Printing direction (B).
Before Printing
Chapter 1
z Loading Other Small-Sized Paper in the Auto Sheet Feeder
Important
1
Load the paper into the Auto Sheet Feeder with the print side facing UP and align
the Cover Guide on the right side of the Paper Support.
Important
Ensure that the Cover Guide stands when you load paper in the Auto
Sheet Feeder.
z Load the paper lengthways regardless of the direction of the
document.
z You can load up to 20 sheets of 4" x 6" or Credit Card-sized paper, and
10 sheets of 5" x 7"-sized paper.
Note
2
3
4
Loading plain paper cut to 4" x 6" / 101.6 mm x 152.4 mm, 5" x 7" / 127.0
x 177.8 mm, or 2.13" x 3.39" / 54.0 x 86.0 mm (Credit Card) size for a trial
printing can cause paper jams.
Pinch the Paper Guide and slide it against the left side of the paper stack.
Press [Feed Switch] so that the Auto Sheet Feeder Lamp lights.
When performing copy direct printing without using a computer, press [Settings] to
select the page size. When using the machine connected to a computer, select the
page size of the loaded paper from [Page Size] in the printer driver.
For a detailed description of the printer driver settings, see “Printing with Windows” on
page 83, or “Printing with Macintosh” on page 85.
1
2
3
Chapter 1
Before Printing
27
Important
Always load paper in portrait orientation (A). Loading paper in landscape
orientation (B) can cause the paper to be jammed.
(A)
Note
(B)
We recommend using genuine Canon photo media when printing
photographs. See “Recommended Paper and Requirements” on
page 19.
„ Loading the Print Media in the Cassette
Depending on page size and media type, some paper must always be loaded in the Auto Sheet
Feeder.
If you intend to use only the Cassette, check any usage restrictions in advance.
See “Recommended Paper and Requirements” on page 19.
z Loading Paper
Note
1
Flatten the four corners of the paper before loading it.
Note
28
For detailed information on the specialty media Canon provides for use
with its various printers, see “Recommended Paper and Requirements”
on page 19.
z Align the edges of paper neatly before loading. Loading paper without
aligning the edges may cause paper jams.
z When paper is curled, hold the opposing curled corners and gently
bend them in the opposite direction until the paper becomes
completely flat. See “Paper is curled.” on page 125.
Before Printing
Chapter 1
2
Prepare to load paper.
(1) Pull out the Cassette from the machine.
(2) Remove the Cover on the Cassette.
(1)
(2)
3
Load the paper. (Print side facing DOWN)
(1) Load the paper into the Cassette with the print side facing DOWN.
(2) Align the paper stack against the right side of the Cassette.
(3) Slide the Paper Guides to fit the loaded paper stack.
(A)
(1)
(2)
(3)
Important
Note
Chapter 1
Do not load the paper beyond this Load Limit Mark (A).
z You can use general copy paper or Canon’s Super White Paper SW201.
z You can load up to 150 sheets of plain paper (64 gsm or 17 lb, 13 mm
or 0.52 inches in height) in the Cassette. However, do not stack more
than 50 sheets in the Paper Output Tray.
z Do not touch the printed surfaces until the ink dries. For specific drying
times, refer to the instructions packaged with your media.
Before Printing
29
4
Insert the Cassette into the machine.
(1) Set the Cover on the Cassette.
(2) Insert the Cassette into the machine.
Push the Cassette all the way into the machine.
(1)
5
Prepare the Paper Output Tray.
(1) Press the Open Button to open the Paper Output Tray.
(2) Pull out the Paper Output Tray Extension completely.
Note
After printing, to put back the Paper Output Tray Extension, push it back
while raising it a little.
(3) Press [Feed Switch] so that the Cassette Lamp (A) lights.
(3)
(A)
(2)
(1)
Note
30
You can also select the paper source with the printer driver. For details,
refer to the Printer Driver Guide.
Before Printing
Chapter 1
z Loading Envelopes
Use either European DL or US Comm. Env. #10 size envelopes.
The address is rotated automatically to match the direction of the envelope when printing.
Important
1
Align the envelope stack against the right side of the Cassette with the print side
facing DOWN, and the rear flaps UP on the left side.
Note
2
z Envelopes can be used only when printing from a computer.
z Do not use envelopes with embossed or treated surfaces, a double
flap, pressure seals or sticker flaps.
z Select either [DL Env.] or [Comm. Env. #10] according to the envelope
size you are using.
z The printed image will be upside down depending on the application. If
this occurs, open the printer properties dialog box then select the
[Rotate 180 degrees] check box on the [Page Setup] tab.
For information on the printer driver settings, refer to the Printer Driver
Guide.
A maximum of 5 envelopes can be loaded at once.
Slide the Paper Guides against the sides of the envelope.
(A)
1
2
Note
3
Fold the envelope flap shut (A).
Press [Feed Switch] so that the Cassette Lamp lights.
3
(B)
Note
Chapter 1
Printing direction (B).
Before Printing
31
4
Select [Envelope] in [Media Type], and then select [DL Env.] or [Comm. Env. #10] in
[Page Size].
For information on the printer driver settings, refer to the Printer Driver Guide.
z Loading 4" x 6"- or 5" x 7"-Sized Paper in the Cassette
Important
1
Load the paper into the Cassette with the print side facing DOWN.
Note
2
3
z Do not leave photo paper, such as Photo Paper Pro, in the Cassette
for a long time. This may cause paper discoloration due to natural
aging.
z If you are using photo paper such as Photo Paper Pro and have
loaded them in the Cassette, the printout may have roller traces on the
print surface. To avoid this, load paper in the Auto Sheet Feeder.
z Loading plain paper cut to 4" x 6" / 101.6 mm x 152.4 mm or 5" x 7" /
127.0 x 177.8 mm size for a trial printing can cause paper jams.
z Load the paper lengthways regardless of the direction of the
document.
z You can load up to 20 sheets of 4" x 6"-sized paper or up to 10 sheets
of 5" x 7"-sized paper.
Align the paper stack against the right side of the Cassette.
Slide the Paper Guides to fit the loaded paper stack.
1
2
3
4
Press [Feed Switch] so that the Cassette Lamp lights.
4
32
Before Printing
Chapter 1
5
When performing copy direct printing without using a computer, press [Settings] to
select the page size. When using the machine connected to a computer, select the
page size of the loaded paper from [Page Size] in the printer driver.
For a detailed description of the printer driver settings, see “Printing with Windows” on
page 83, or “Printing with Macintosh” on page 85.
Important
Always load paper in portrait orientation (A). Loading paper in landscape
orientation (B) can cause the paper to be jammed.
(A)
Note
Chapter 1
(B)
We recommend using genuine Canon photo media when printing
photographs. See “Recommended Paper and Requirements” on
page 19.
Before Printing
33
Changing the Print Settings
This section describes the Settings screen that can be specified on the Operation Panel when
copying, or printing from memory card, photos or films.
„ To Change Print Settings
You can change the print settings such as page size, media type, bordered or borderless print,
etc.
z How to change the Settings screen
This section describes the steps to specify the page size for Memory card mode to <4" x 6"
(101.6 x 152.4)> as an example. For information on each item, see “Print Setting Items” on
page 35.
1
Display the Settings screen.
(1) Press [Settings].
The Settings screen is displayed.
2
Select the Setting tab.
(1) Use [ ] or [ ] to select the Setting tab.
Select tab 1 here.
3
Select the setting item.
(1) Use [ ] or [ ] to select the setting item.
Select <A4> here.
34
Before Printing
Chapter 1
4
Change the setting.
(1) Use [ ] or [ ] to change the setting.
Change to <4" x 6" (101.6 x 152.4)> here.
5
Complete setting.
(1) Press [Settings].
Return to the Settings screen.
„ Print Setting Items
Each tab contains the following setting items. To change the tab, use [
use [ ] or [ ].
Note
] to select the tab and
Depending on the functions specified in the Copy, Memory card, or Photo/
film mode, some setting items cannot be specified in combination.
z Copy mode
This section describes the Settings screen for Copy mode.
(1)
(2)
(3)
(4)
(5)
Tab 1
You can specify the paper settings for printing or print quality.
(1) You can specify the page size.
8.5" x 11" (215.9 x 279.4), A4, B5, A5, 4" x 6" (101.6 x 152.4), 5" x 7" (127 x 177.8),
Credit card
Important
Note
Some page sizes cannot be loaded in the Cassette and should be loaded
in the Auto Sheet Feeder.
Some of these are not available depending on the country of purchase.
(2) You can specify the media type.
Plain paper, Photo Paper Pro, Photo Plus Glossy, Matte Photo Paper, Glossy Photo
Paper
(3) You can adjust image quality according to the documents you want to copy.
Fast, Standard, High
Chapter 1
Before Printing
35
Note
z <Fast> can be selected when <Plain paper> is selected as the media
type.
z When using <Fast> with media type set to <Plain paper>, if the quality
is different from that expected, select <Standard> or <High> and try
copying again.
z Select <High> to copy in grayscale. Grayscale renders tones in a
range of grays instead of black or white.
(4) You can specify the reduction or enlargement method.
Same magnification, Preset ratio, Zoom (25 - 400%), Fit-to-page
Tab 2
You can specify auto intensity.
(5) This function automatically adjusts the intensity of the document on the Platen Glass.
Auto intensity ON, Auto intensity OFF
z Memory card and Photo/film modes
This section describes the Settings screen for Memory card and Photo/film modes.
Tab 1
You can specify the settings such as the paper, bordered/borderless, and Date/file no.
Example: Memory card mode
(1)
(2)
(3)
(4)
(5)
Note
You can change the print settings on this screen when a PictBridge
compliant device is connected to this machine.
(1) Select the page size.
8.5" x 11" (215.9 x 279.4), A4, 4" x 6" (101.6 x 152.4), 5" x 7" (127 x 177.8), Credit card
Important
Note
Some page sizes cannot be loaded in the Cassette and should be loaded
in the Auto Sheet Feeder.
Some of these are not available depending on the country of purchase.
(2) Select the media type.
Plain paper*1, Photo Paper Pro, Photo Plus Glossy, Matte Photo Paper, Glossy Photo
Paper
(3) Select the print quality.
Standard, High
(4) Select bordered or borderless print.
Bordered, Borderless
Note
When <Plain paper> is selected in <Media type>, bordered printing will
be performed even if you select <Borderless>.
(5) Select whether to print the shooting date, file no., or not.*1
No date/file no., Print date only, Print file no. only, Print date & file no.
*1
36
Can be selected only in Memory card mode.
Before Printing
Chapter 1
Tab 2
Allows you to optimize photos with the functions below.
Memory card mode
(1)
(2)
(3)
(4)
(5)
Photo/film mode
(6)
(7)
(8)
(9)
(10)
(11)
(1) Red eye correction ON, Red eye correction OFF*1
When <Red eye correction ON> is selected, portraits with a red eye caused by flash
photography are corrected in print.
(2) Activate/deactivate Vivid photo function.*1
This function makes green and blue more lively.
Vivid photo ON, Vivid photo OFF
(3) Activate/deactivate the Photo Optimizer pro function.*1
This function automatically optimizes brightness and tone of a photo.
Photo optimizer pro ON, Photo optimizer pro OFF
(4) Activate/deactivate the Noise reduction function.*1
This function reduces the noise on blue areas like the sky as well as on black areas.
Noise reduction ON, Noise reduction OFF
(5) Activate/deactivate Face brightener function.*1
This function brightens a darkened face on the photo taken against the light.
Face brightener ON, Face brightener OFF
(6) Choosing <Image optimizer ON> enables you to correct and smooth the jagged contours
for printing.*1
Image optimizer ON, Image optimizer OFF
(7) Adjust brightness.*1
Brightness +2, Brightness +1, Brightness standard, Brightness -1, Brightness -2
(8) Adjust contrast.*1
Contrast +2, Contrast +1, Contrast standard, Contrast -1, Contrast -2
(9) Adjust color hue.*1
Color hue red +2, Color hue red +1, Color hue original, Color hue yellow +1, Color hue
yellow +2
(10) Select the type of special effects applied to the photo, such as printing in sepia tones or
with a sketch illustration like effect.*1
No effects, Sepia, Simulate illustration
(11) Choosing <Fade restoration> corrects the color when printing photos that have faded or
color cast over time.
Choosing <Face brightener> brightens a darkened face on a portrait taken against the
light.*2
No image enhancement, Fade restoration, Face brightener
*1
Can be selected only in Memory card mode.
*2
Can be selected only in Photo/film mode.
Chapter 1
Before Printing
37
Chapter 2
Copying
Making Copies
This section describes the basic procedure to make copies.
1
Prepare for copying.
(1) Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 17.
(2) Press [COPY].
(3) Load paper.
See “Loading Paper” on page 19.
(4) Ensure that the proper paper source is selected.
See “Changing the Paper Source” on page 23.
Specify [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when
feeding paper from the Auto Sheet Feeder and the Cassette Lamp is lit
when feeding paper from the Cassette.
Note
2
Start copying.
(1) Check the page size and media type.
Press [Settings] to check or change the page size, media type, or other
settings. See “To Change Print Settings” on page 34.
Note
(2) Use [
] or [
] to specify the number of copies.
(2)
(1)
The following information is displayed as well.
Intensity:
Pressing [ ] decreases the intensity, and pressing [ ] increases the
intensity.
You can also use the auto intensity. See “Print Setting Items” on page 35.
(3) Load the document on the Platen Glass.
Note
For information on the types and conditions of documents which you can
copy, see “Loading Documents” on page 18.
(4) Press [Color] for color copying, or [Black] for black & white copying.
The machine starts copying.
Note
38
Copying
To cancel copying, press [Stop/Reset].
Chapter 2
„ Reducing or Enlarging a Copy
You can reduce or enlarge copies.
1
Prepare for copying.
See “Prepare for copying.” on page 38.
2
Select the reduction/enlargement method.
The example below assumes that you will select <Zoom (25-400%)>.
(1) Press [Settings].
(2) Use [
] or [
] to select Tab 1.
(3) Use [ ] or [ ] to select <Magnification>, and use [ ] or [ ] to select <Zoom (25400%)>.
Specify the custom copy ratio for reducing or enlarging copies.
(3)
Besides <Zoom (25-400%)>, you can also choose from the following reduction/
enlargement methods.
Same magnification: Copies in the same size as an original.
Preset ratio:
Preset ratios are convenient when changing between standard page
sizes, for example, when reducing A4 to A5, or enlarging B5 to A4.
Fit-to-page:
You can automatically reduce or enlarge the document to fit the size of
the paper which are loaded in the Auto Sheet Feeder or Cassette.
(4) Press [ ] to move the cursor down, and use [ ] or [ ] to select the setting value.
Holding down [ ] or [ ] steps through the values faster.
Note
3
When you choose <Fit-to-page>, the document size may not be detected
correctly depending on the document. In that case, choose <Same
magnification>, <Preset ratio> or <Zoom (25-400%)>.
Finalize your selection.
(1) Press [Settings].
Return to the Copy standby screen.
4
Start copying.
See “Start copying.” on page 38.
Chapter 2
Copying
39
Changing the Copy Settings
You can change the copy settings such as the page size, media type, or print quality.
For details on changing the copy settings and setting items, see “To Change Print Settings” on
page 34.
1
2
3
4
1
2
3
4
5
You can specify the page size.
You can specify the media type.
You can adjust print quality for the document to be copied.
You can specify the reduction/enlargement method.
See “Reducing or Enlarging a Copy” on page 39.
5
You can specify if auto intensity is performed.
Specifying <Auto intensity ON> automatically changes the icon above the intensity slide bar
on the LCD to <AUTO>.
Important
Even while <Auto intensity ON> is selected, you can change the intensity
by pressing [ ] or [ ]. Move the cursor to the center of the slide bar to
enable auto intensity again.
Using Useful Copy Functions
„ Special Copy
You can copy in various layouts.
1
Prepare for copying.
See “Prepare for copying.” on page 38.
2
Select the copy menu.
(1) Press [Menu].
40
Copying
Chapter 2
(2) Use [ ] or [ ] to select <Special copy>, then press [OK].
The Special copy screen is displayed.
(2)
z Copying onto Both Sides of the Paper (Two-sided copy)
You can copy two document pages onto the sides of a single sheet of paper.
Long-side stapling and Short-side stapling
Procedure:
(1) Display the Special copy screen.
See “Special Copy” on page 40.
(2) Use [
] or [
(3) Use [
] or [
] to select the orientation of the document, then press [OK].
] to select <Two-sided copy>, then press [OK].
(4) Use [
] or [
] to select the binding margin, then press [OK].
(5) Follow the on-screen instructions to load the document to be printed on the front face on
the Platen Glass, then press [OK].
(6) Specify the necessary items.
See “To Change Print Settings” on page 34.
(7) Press [Color] for color copying, or [Black] for black & white copying.
(8) Load the document to be printed on the back face on the Platen Glass. If you have only
one document to scan, press [OK].
(9) Press [Color] or [Black]. Be sure to press the same button as you pressed in step (7).
Important
Note
Chapter 2
If you do not press the same button in step (7) and step (9), the machine
does not start copying.
z This function cannot be used in conjunction with <Fit-to-page> under
<Magnification> or other copy functions.
z If you perform black & white copying for <Two-sided copy>, print
intensity may be different from when performing black & white copying
for single-sided copy.
z This function can only be used when the page size is set to <8.5" x 11"
(215.9 x 279.4)> or <A4>.
z The media type is fixed to <Plain paper>. You cannot change this
setting.
Copying
41
z Copying Two Pages to Fit onto a Single Page (2-on-1 copy)
This feature enables you to copy two documents (A) (B) onto a single sheet (C) of paper by
reducing each image.
(B)
(A)
(C)
Procedure:
(1) Display the Special copy screen.
See “Special Copy” on page 40.
(2) Use [
] or [
] to select <2-on-1 copy>, then press [OK].
(3) Follow the on-screen instructions to load the document to be printed on the left side on
the Platen Glass, then press [OK].
(4) Specify the necessary items.
See “To Change Print Settings” on page 34.
(5) Press [Color] for color copying, or [Black] for black & white copying.
(6) Load the document to be printed on the right side on the Platen Glass. If you have only
one document to scan, press [OK].
(7) Press [Color] or [Black]. Be sure to press the same button as you pressed in step (5).
Important
Note
If you do not press the same button in step (5) and step (7), the machine
does not start copying.
z This function cannot be used in conjunction with other functions.
z If <Device memory is full.> appears on the LCD when scanning, set
the print quality to <Standard> and try copying again.
z You can use this feature only when the page size is set to <8.5" x 11"
(215.9 x 279.4)> or <A4>.
z You cannot select <Magnification>.
z Copying Four Pages to Fit onto a Single Page (4-on-1 copy)
This feature enables you to copy four documents onto a single sheet of paper by reducing each
image. Four types layouts can be selected.
Procedure:
(1) Display the Special copy screen.
See “Special Copy” on page 40.
42
Copying
Chapter 2
(2) Use [
] or [
] to select <4-on-1 copy> and press [OK].
(3) Use [
] or [
] to select the layout, then press [OK].
(4) Follow the on-screen instructions to load the first document to print on the Platen Glass,
then press [OK].
(5) Specify the necessary items.
See “To Change Print Settings” on page 34.
(6) Press [Color] for color copying, or [Black] for black & white copying.
(7) Load the second document to print on the Platen Glass, and press the same button as
you pressed in step (6).
(8) Repeat step (7) until you finish loading the fourth document, then press the same button
as you pressed in step (6). If you have only one, two or three documents to scan, press
[OK] after loading the last document.
Important
If you do not press the same button in step (6), steps (7) and (8), the
machine does not start copying.
z This function cannot be used in conjunction with other copy functions.
z If <Device memory is full.> appears on the LCD when scanning, set
the print quality to <Standard> and try copying again.
z This function can be used only when page size is set to <8.5" x 11"
(215.9 x 279.4)> or <A4>.
z You cannot specify <Magnification> for this function.
Note
z Copying without Borders (Borderless copy)
This feature enables you to copy images so that they fill the entire page without borders.
Procedure:
(1) Display the Special copy screen.
See “Special Copy” on page 40.
(2) Use [
] or [
] to select <Borderless copy>, then press [OK].
(3) Specify the necessary items.
See “To Change Print Settings” on page 34.
(4) Press [Color] or [Black] to start copying.
Note
Chapter 2
z The copied image may need to be enlarged to fit onto the selected
page size when making borderless copies. Some cropping may occur.
z You can use this feature only when the page size is set to <8.5" x 11"
(215.9 x 279.4)>, <A4>, <4" x 6" (101.6 x 152.4)>, <5" x 7" (127 x
177.8)>, or <Credit card>.
z You can use this feature only when the paper is set to <Photo Paper
Pro>, <Photo Plus Glossy>, <Matte Photo Paper>, <Glossy Photo
Paper>.
z You can specify print quality to either <Standard> or <High>.
z You can select the width to be cropped from the borders of the original
image according to the image size.
Copying
43
z Repeating an Image on a Page (Image repeat)
This feature enables you to copy an image multiple times onto a single page. You can set the
machine to automatically select the number of times it repeats the image, or you can specify the
number.
Procedure:
(1) Display the Special copy screen.
See “Special Copy” on page 40.
(2) Use [
] or [
] to select <Image repeat>, then press [OK].
(3) Use [ ] or [ ] to select <Auto layout> or <Manual layout>.
If you selected <Auto layout> and pressed [OK], go to step (7).
If you selected <Manual layout> and pressed [OK], go to step (4).
(4) Use [
(5) Press [
(6) Use [
] or [
] to set the vertical repeats.
] to move the cursor to the right.
] or [
] to set the horizontal repeats, then press [OK].
(7) Specify the necessary items.
See “To Change Print Settings” on page 34.
(8) Press [Color] for color copying, or [Black] for black & white copying.
Important
Note
44
Copying
z The area read from the documents depends on the enlargement/
reduction ratio.
z The size of the documents to copy should be no larger than one
division of the paper. For example, if you copy four documents at the
same size, their sizes must be one-fourth of the page size or smaller.
z <Credit card> cannot be selected for the page size.
z <Fit-to-page> cannot be selected for <Magnification>.
Chapter 2
Chapter 3
Printing from a Memory Card
Using the Memory Card
This section describes the compatible memory cards and how to insert and remove them.
„ Memory Cards Supported by This Machine
The following memory cards are compatible with this machine.
Memory cards that can be directly inserted into the Card Slot:
z Compact Flash (CF) Card
Supports Type I/II (3.3V)
z Microdrive
z SmartMedia
Supports 3.3V card only
1MB and 2MB cards are not supported
z MEMORY STICK
z MEMORY STICK PRO
z SD Secure Digital memory card
z MultiMedia Card
Memory cards that can be inserted in the Card Slot using the adapter:
xD-Picture Card*1
z MEMORY STICK Duo*2
z MEMORY STICK PRO Duo*2
miniSD Card*2
Chapter 3
Printing from a Memory Card
45
*1
Requires purchase of a separate compact flash card adapter for xD-Picture cards.
*2
Use the special adapter provided with the card.
Important
z This machine supports image data created by DCF standard digital
cameras (based on Exif), and DPOF (based on Ver 1.00).
z Image data taken or saved on memory cards that do not guarantee the
action with the digital camera might be unreadable from the machine
or the image data might be damaged. For details on memory cards
guarantee the action with the digital camera, refer to the manuals
supplied with your digital camera.
z Format the memory card with a digital camera. The memory card
might not be usable with the machine if formatted on a computer.
z Images edited on a computer may not be printed correctly.
z Insert only one kind of memory card at a time.
„ Inserting the Memory Card
Note
1
z When <Read/write mode> is selected in Read/write attribute under
Other settings by using the Operation Panel on the machine, card
direct printing cannot be done. After using the Card Slot as the
memory card drive of the computer, remove the memory card, then be
sure to set Read/write attribute to <Read-only mode>. See “Read/write
attribute” on page 95.
z When you have edited or processed the data on a memory card on a
computer, be sure to print the data from the computer. If you print
using the Operation Panel, the data might not be printed correctly.
Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 17.
2
46
Open the Card Slot Cover.
Printing from a Memory Card
Chapter 3
3
Insert a memory card into the Card Slot.
Card Type
Inserting Card
z Compact Flash (CF) card
z Microdrive
z xD-Picture card*
(A)
Insert into the Card Slot on the left side.
The Access Lamp (A) lights up.
z SmartMedia
(A)
Insert into the Card Slot on the right side.
The Access Lamp (A) lights up.
z
z
z
z
z
z
z
MEMORY STICK
MEMORY STICK PRO
MEMORY STICK Duo*
MEMORY STICK PRO Duo*
SD Secure Digital memory card
miniSD Card*
MultiMedia card
(A)
Insert into the center part of the Card Slot on the right side.
The Access Lamp (A) lights up.
* Be sure to attach the memory card to the special adapter before inserting it into the Card
Slot.
4
Ensure that the Access Lamp is lit after it stops flashing.
Caution
5
z The memory card sticks out of the Card Slot, but do not force it into the
slot any further. Doing so damages the machine and the memory card.
z Check if the right side of the memory card is facing up. If you force the
memory card with the wrong side up into the Card Slot, the machine
and/or the memory card may be damaged.
z While the Access Lamp is flashing, do not remove the memory card or
the card adapter containing the memory card, nor turn off the machine,
as this might damage the data on the memory card.
Close the Card Slot Cover.
Chapter 3
Printing from a Memory Card
47
„ Removing the Memory Card
Note
1
2
Open the Card Slot Cover.
Ensure that the Access Lamp is not flashing, then remove the memory card.
Important
3
If you use the Card Slot as a memory card drive for your computer,
removing operation from the computer is required before removing the
memory card.
z When Windows is being used, right-click the removable disk icon and
click [Eject]. If [Eject] is not displayed on the screen, ensure that the
Access Lamp is not flashing and remove the memory card.
z When Macintosh is being used, be sure to drag the
icon into the
Trash.
Removing the memory card or turning off the machine while the Access
Lamp is flashing can damage the data stored in the memory card.
Close the Card Slot Cover.
Printing Photograph
Let’s select a photo from the photos stored on the memory card of the digital camera, and print it.
„ Printing Photo Displayed on the LCD (Single-photo print)
Print a photo saved on the memory card.
1
Prepare for printing.
(1) Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 17.
(2) Load paper.
See “Loading Paper” on page 19.
(3) Ensure that the proper paper source is selected.
See “Changing the Paper Source” on page 23.
Note
Specify [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when
feeding paper from the Auto Sheet Feeder and the Cassette Lamp is lit
when feeding paper from the Cassette.
(4) Insert a memory card into the Card Slot.
See “Inserting the Memory Card” on page 46.
48
Printing from a Memory Card
Chapter 3
2
Select the print menu.
(1) Press [MEMORY CARD].
(2) Use [ ] or [ ] to select <Single-photo print>, then press [OK].
The photo selection screen is displayed.
may be displayed on the LCD while reading the photo.
Note
(2)
3
Select the photo you want to print.
(1) Use [
] or [
] to display the photo you want to print.
(2) Press [Color].
The print confirmation screen is displayed.
Note
Chapter 3
Displaying Photos Automatically on the LCD (Slide Show)
You can automatically display photos in sequence when selecting
<Single-photo print>.
z To start the slide show, press [OK] when checking photos in <Singlephoto print>.
z To stop the slide show, press [Stop/Reset] during the slide show.
You can do...
z To search for photos with the shooting date (Search), see “Searching
for Photos with the Shooting Date (Search)” on page 51.
z To print a specified area (Trimming), see “Printing a Specified Area
(Trimming)” on page 52.
Printing from a Memory Card
49
4
Start printing.
(1) Check the page size and media type.
Press [Settings] to check or change the page size, media type, or other
settings. See “To Change Print Settings” on page 34.
Note
(2) Use [
] or [
] to specify the number of prints.
(2)
(1)
(3) Press [Color].
The machine starts printing.
z To cancel printing, press [Stop/Reset].
z The printing is not started if you press [Black].
Note
„ Specifying How Many Copies to Print for Each Photo (Multi-photo print)
You can specify the number of prints to be made for each photo.
1
Prepare for printing.
See “Prepare for printing.” on page 48.
2
Select the print menu.
(1) Press [MEMORY CARD].
(2) Use [ ] or [ ] to select <Multi-photo print>, then press [OK].
The photo selection screen is displayed.
3
Specify the number of prints for each photo.
(1) Use [
] or [
(2) Use [
] or [
] to select the image you want to print.
] to specify the number of prints.
(2)
(3) Repeat from step (1) to step (2) to specify the number of prints for each photo.
(4) Press [OK].
The print confirmation screen is displayed.
Note
50
You can do...
z To search for photos with the shooting date (Search), see “Searching
for Photos with the Shooting Date (Search)” on page 51.
z To print a specified area (Trimming), see “Printing a Specified Area
(Trimming)” on page 52.
Printing from a Memory Card
Chapter 3
4
Start printing.
(1) Confirm the settings.
To change any of the settings, press [Settings].
See “Changing the Print Settings” on page 34.
(2) Press [Color].
The specified number of copies of each photo will be printed.
z To cancel printing, press [Stop/Reset].
z The printing is not started if you press [Black].
Note
Other Useful Functions
„ Searching for Photos with the Shooting Date (Search)
When there are a lot of photos saved on the memory card, you can choose to display and print
only photos shot on the specified date or within the specified range of dates.
z By pressing [Search] to specify a date or date range, you can display
and print the photos shot on the specified date or within the specified
date range in <Single-photo print> or <Multi-photo print>, <Layout
print>, <Sticker print>, or <Captured info>(<Single photo>).
z If the number of prints to make is already specified for some photos
before searching with the shooting date, or if some photos are already
pasted on a layout, those photos will still be selected for printing even
if they were not shot on the specified date or within the specified date
range.
z When using <Print all photos>, <Photo index print> or <Captured
info>(<List>), only the photos shot on the specified date or within the
specified date range can be printed.
Note
1
Set the search method.
(1) Press [Search].
The Search method screen is displayed.
(2) Use [ ] or [ ] to select the search method.
If you want to specify only one date for search, select <One date only>.
If you want to specify the date range for search, select <Select date range>.
(3) Press [OK].
The date input screen is displayed.
It may take a while for the date input screen to be displayed depending
on the number of photos saved on the memory card.
Note
2
Specify the date range.
z If you selected <One date only>:
(1) Use [
] or [
] to specify the date to search for.
(2) Go to main step 3.
z If you selected <Select date range>:
(1) Use [
[OK].
] or [
] to specify the date of the oldest photos you want to print, then press
(2) Use [
] or [
] to specify the date of the most recent photos you want to print.
(3) Go to main step 3.
Chapter 3
Printing from a Memory Card
51
3
Start searching.
(1) Press [OK].
The machine starts searching and the photos within the specified date range are
displayed.
z The date to be specified is displayed according to the settings of <Date
display>. See “Date display” on page 95.
z To exit Search mode, select <Cancel search> from the Search method
screen, and then press [OK]. You can also exit Search mode by
switching to any mode other than Memory card mode.
Note
„ Printing a Specified Area (Trimming)
You can edit images displayed on the LCD by cropping them.
Crop images after specifying the page size, media type, and bordered or
borderless printing in the Settings (Memory Card). If you change the
paper settings after cropping, the cropped area may be adjusted to match
the paper, or be disabled completely.
Note
1
Select the photo you want to crop.
(1) Use [
2
] or [
] to select the photo you want to crop.
Display the trimming edit screen.
(1) Press [Trimming].
The trimming edit screen is displayed.
3
Choose the area you want to print.
(1) Use [ ], [ ], [ ], [ ] to position the cropping frame, then press [Trimming].
If you do not rotate or resize the cropping frame, go to main step 4.
(2) Use [
52
] to enlarge or [
] to reduce the cropping frame size, respectively.
Printing from a Memory Card
Chapter 3
(3) Use [
4
] or [
] to switch the cropping frame between portrait and landscape.
Finalize your selection of trimming area.
(1) Press [OK].
The area to be cropped is specified, and the original photo is displayed.
z The cropped image cannot be newly saved on the memory card.
z The trimming area is displayed only for photos which have been
trimmed.
z To change the trimming area once it has been set, press [Trimming]
again.
z To cancel trimming while editing the trimming frame, press [Stop/
Reset] while the trimming edit screen is displayed. You can also
cancel trimming by switching to any mode other than Memory card
mode.
z To cancel trimming after trimming has been set, press [Trimming] and
then press [Stop/Reset].
Note
„ Printing Several Photos on a Single Sheet of Paper (Layout print)
You can print the specified photos in the specified layout.
1
Prepare for printing.
See “Prepare for printing.” on page 48.
2
Select the print menu.
(1) Press [MEMORY CARD].
3
(2) Use [
] or [
] to select <Special photo print>, then press [OK].
(3) Use [
] or [
] to select <Layout print>, then press [OK].
Specify the layout.
(1) Use [ ] or [ ] to select the layout, then press [OK].
The following layouts can be selected.
Bordered:
Borderless:
Album:
Mixed:
Note
Chapter 3
x2/x4/x8, Half, Half (w/line)
x2/x4/x8, Half, Half (w/line)
Album (4/right), Album (4/left)
Mixed 1, Mixed 2, Mixed 3
z When you select Borderless, the media type cannot be set to <Plain
paper>.
z You can select Mixed 1-3 only when the page size is set to <8.5" x 11"
(215.9 x 279.4)> or <A4>.
Printing from a Memory Card
53
4
Specify the paste method.
(1) Use [ ] or [ ] to select the pasting method.
If you select <Paste all> then press [OK], all photos saved on the memory card are
automatically pasted in the specified layout. Go to step 6.
If you select <Paste one by one> then press [OK], the photo selection screen is
displayed.
5
Paste photos one by one.
(1) Use [
] or [
] to display the photo to be pasted, then press [OK].
You can do...
z To search for photos with the shooting date (Search), see “Searching
for Photos with the Shooting Date (Search)” on page 51.
z To print a specified area (Trimming), see “Printing a Specified Area
(Trimming)” on page 52.
Note
(2) Repeat step (1) to paste photos.
Press [Back] to cancel the last pasted photo.
Press [Stop/Reset] to cancel all pasted photos.
(3) Press [Color] after pasting all photos.
The print confirmation screen is displayed.
Pasting cannot be done over multiple pages. When you finish pasting
photos for one page, print the page.
Note
6
Start printing.
See “Start printing.” on page 50.
„ Printing on the Sticker (Sticker Print)
You can print your favorite photo with a frame on Canon Photo Stickers.
1
Prepare for printing.
See “Prepare for printing.” on page 48.
z When you use this function, load paper in the Auto Sheet Feeder.
z You can only load one sheet of stickers at a time in the Auto Sheet
Feeder.
Note
2
Select the print menu.
(1) Press [MEMORY CARD].
3
(2) Use [
] or [
] to select <Special photo print>, then press [OK].
(3) Use [
] or [
] to select <Sticker print>, then press [OK].
Select the layout for the sticker you want to print.
(1) Use [ ] or [ ] to select <Stickers x 16>.
You can only print in the Stickers x 16 layout though other layouts appear on the LCD.
(2) Press [OK].
The photo selection screen is displayed.
54
Printing from a Memory Card
Chapter 3
4
Select the photo you want to print.
(1) Use [ ] or [ ] to display the photo to print, then press [OK].
The frame selection screen is displayed.
Note
5
You can do...
z To search for photos with the shooting date (Search), see “Searching
for Photos with the Shooting Date (Search)” on page 51.
z To print a specified area (Trimming), see “Printing a Specified Area
(Trimming)” on page 52.
Select the frame.
(1) Use [ ] or [ ] to select the frame, then press [OK].
The print confirmation screen is displayed.
Note
6
z If you do not select a frame using [ ] or [ ], the photo is printed
without any frame. When you want to print with no frame, just press
[OK].
z When the photo is upside down, use [ ] or [ ] to rotate it by 180
degrees to orient it properly against the frame.
z If you want to rotate the photo by 90 degrees to fit it within the frame,
use the trimming edit screen to rotate the cropping area. See “Printing
a Specified Area (Trimming)” on page 52.
Start printing.
See “Start printing.” on page 50.
Note
Settings cannot be changed when printing stickers.
„ Other Printing Functions
The following print functions are also provided under the Special photo print menu.
z <Print all photos>
You can print all photos saved on the memory card.
z <Photo index print>
You can print a list of all the photos saved on a memory card.
Note
Chapter 3
The following print methods are available:
<Standard>:
The number of photos printed on a single sheet of paper depends on
the size of the medium.
– Letter / A4: 80 photos
– 5" x 7" / 127.0 x 177.8 mm: 35 photos
– 4" x 6" / 101.6 x 152.4 mm: 24 photos
– Credit Card: 6 photos
<Contact print>:
35 mm film images are printed in its negative size as in contact print.
Printing from a Memory Card
55
z <DPOF print>
If you have specified Digital Print Order Format (DPOF) settings on your digital camera, you can
print using these settings.
z The machine supports the following DPOF functions:
Supported image formats:
CIFF, Exif and JFIF
Print Style Standard Print:
Prints photos that were specified as “Standard Print” with DPOF
Print Style Index Print:
Prints an index of photos that were specified as “Index Print” with
DPOF using the machine’s index printing layout (<Standard>)
Print Photo Select:
Prints only photos specified with DPOF (cannot be specified from the
Operation Panel)
Number of copies:
Prints the number of copies specified with DPOF (cannot be specified
from the Operation Panel)
Functions other than the above (adding captions or titles, cropping,
image rotation, etc.) are not supported.
z Prints are automatically enlarged or reduced to match the page size.
Edges of the photo may be clipped off depending on the page size.
z The shot date order setting by which photos are sorted follows that of
DPOF.
Note
z <Captured info>
Information on photographs at the time of its shooting (Exif info) can be printed in the margin of
Photo index print or selected individual photos.
The following print methods are available:
<List>:
Prints the information in the margin of Photo index print of all photos.
<Single photo>:
Prints the information in the margin of selected individual photos.
Note
1
Prepare for printing.
See “Prepare for printing.” on page 48.
2
Select the print menu.
(1) Press [MEMORY CARD].
(2) Use [
56
] or [
] to select <Special photo print>, then press [OK].
Printing from a Memory Card
Chapter 3
(3) Use [
] or [
Note
3
] to select the print menu, then press [OK].
z In <Photo index print> and <Captured info>, the print method selection
screen is displayed.
Use [ ] or [ ] to select the print method, then press [OK].
z If you selected <Single photo> for <Captured info>, the photo
selection screen is displayed.
Use [ ] or [ ] to select the photos to print, then press [OK].
You can do...
z To search for photos with the shooting date (Search), see “Searching
for Photos with the Shooting Date (Search)” on page 51.
z To print a specified area (Trimming), see “Printing a Specified Area
(Trimming)” on page 52.
Start printing.
See “Start printing.” on page 50.
Note
z For the <Print all photos>, all photos saved on the memory card will be
printed.
z For the <Photo index print>, an index of all photos saved on the
memory card will be printed.
z You cannot configure the number of prints when using <DPOF print>.
z For the <DPOF print>, the photos will be printed according to the
DPOF information on the memory card.
z When using <Captured info>, information on photographs are printed
in the margin of Photo index print or selected individual photos.
„ Printing by Using the Photo Index Sheet
With this machine, you can easily select print options as well as the photos to print using the
Photo Index Sheet and by marking its appropriate circles. Simply scanning the Photo Index
Sheet prints the selected photographs according to the settings you have made.
1
Prepare for printing.
(1) Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 17.
(2) Load A4 or Letter-size paper.
See “Loading Paper” on page 19.
Note
Use white plain paper when printing a Photo Index Sheet.
(3) Ensure that the proper paper source is selected.
See “Changing the Paper Source” on page 23.
Note
Specify [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when
feeding paper from the Auto Sheet Feeder and the Cassette Lamp is lit
when feeding paper from the Cassette.
(4) Insert a memory card into the Card Slot.
See “Inserting the Memory Card” on page 46.
Chapter 3
Printing from a Memory Card
57
2
Select the Photo Index Sheet menu.
(1) Press [Photo Index Sheet].
The Photo Index Sheet menu is displayed.
(2) Use [
3
] or [
] to select <Photo Index Sheet print>, then press [OK].
Select a range of image data to print.
(1) Use [ ] or [ ] to select a range of images you want to include in the Photo Index
Sheet, then press [OK].
<Print all photos>:
<Set no. of copies>:
<Search>:
All images are printed on the Photo Index Sheet.
Prints by specifying the number of photos.
Prints by specifying the date range.
z If you selected <Print all photos>:
(2) Go to step 4.
z If you selected <Set no. of copies>:
(2) Use [ ] or [
press [OK].
] to specify the number of photos to print starting with the newest one, then
(3) Go to step 4.
z If you selected <Search>:
(2) Use [
] or [
] to specify the oldest shot date to include in print, then press [OK].
(3) Use [
] or [
] to specify the newest shot date to include in print, then press [OK].
(4) Go to step 4.
Note
58
It may take time to display the Search screen depending on the number
of photos saved on the memory card.
Printing from a Memory Card
Chapter 3
4
Start printing the Photo Index Sheet.
(1) Press [Color].
Printing of the Photo Index Sheet starts.
Note
When there are more than 37 images, two or more Photo Index Sheets
are printed.
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(A) Select the page size and print type.
(B) Select date printing and/or photo optimizer as necessary. See “Print Setting Items” on
page 35.
(C) Mark this to print all photographs, one copy each.
*When you mark this, even if you mark the number of copies you want to print for each
photograph, those marks will be disregarded, and one copy each of all photographs will be
printed.
(D) Select the number of copies (fill in a circle under each photograph you want to print).
(E) Follow the procedure as described.
(F) Select the paper source.
(G) Mark this to print the same Photo Index Sheet again.
*If you mark this, all other marked settings will be disregarded.
5
Fill in the appropriate circles in the Photo Index Sheet.
Fill in the appropriate circles (
print and their print options.
Chapter 3
) with a dark pencil or a black ink pen to select the photos to
Printing from a Memory Card
59
z Good
z Bad
(B)
(A)
(C)
(A) Check mark
(B) Line only
(C) Too light
Important
6
z Be sure to fill a circle for every setting item (except options).
z If there is more than one Photo Index Sheet, fill in all the sheets.
z If the filled circles on the Photo Index Sheet are not dark enough, the
machine may not read the settings.
Scan the Photo Index Sheet and print photos.
(1) Load the paper you selected for the Photo Index Sheet.
See “Loading Paper” on page 19.
z When printing images using the Photo Index Sheet, you can select 4"
x 6" (101.6 x 152.4 mm), 5" x 7" (127 x 177.8 mm), 8.5" x 11"
(LETTER), or A4 for the page size.
z Load paper in the location you selected under <The Paper Feeder> on
the Photo Index Sheet.
Note
(2) Press [Photo Index Sheet].
(3) Use [
] or [
] to select <Scan sheet and print>, then press [OK].
(4) Place the Photo Index Sheet on the Platen Glass, then press [OK].
When placing the Photo Index Sheet, place the front side down, and align the upper left
corner of the sheet precisely with the arrow mark (alignment mark) at the upper left
corner of the Platen Glass.
The Photo Index Sheet is scanned and the specified photos will be printed.
Important
Note
60
z If <Failed to scan Photo Index Sheet.> is displayed on the LCD, press
[OK]. Make sure that you have marked all the necessary circles on the
sheet, and confirm its orientation and position when it is set on the
Platen Glass for scanning.
z If the filled circles on the Photo Index Sheet are not marked dark
enough, the machine may not read the settings.
z Do not remove the memory card while the machine is printing.
z If the Platen Glass is dirty, the machine may not read the settings. See
“Cleaning the Platen Glass and Document Cover” on page 109.
z If the Photo Index Sheet is dirty, the machine may not read the
settings.
z To cancel printing, press [Stop/Reset].
z To continue to print photographs using subsequent Photo Index
Sheets, repeat the procedure from step 5.
z If the memory card has been removed and then reinserted before
printing with the Photo Index Sheet, it may take some time before
printing starts.
Printing from a Memory Card
Chapter 3
Chapter 4
Photo Printing from Photo or Film
You can scan and print printed photos and 35 mm film into the machine. For film, both film strips (six
connected frames per strip after regular developing) and slides (one frame per mounted slide) are
supported. Various effects can be applied to the images before printing them.
Note
Image data scanned from photo or film cannot be saved in the machine’s
memory or on a memory card. For how to save it on a computer, refer to
the Scan Guide, located on your Setup CD-ROM.
Scanning a Photo
This section describes how to scan a printed photo.
You can set up to two 4"x 6"/ 101.6 x 152.4 mm sized or 5"x 7"/ 127 x 177.8 mm sized prints, or four
Credit Card sized prints at a time on the Platen Glass.
1
Press [ON/OFF] to turn on the machine.
See “Turning the Machine ON and OFF” on page 17.
2
Select the type of original to scan.
(1) Press [PHOTO/FILM].
(2) Use [ ] or [ ] to select <Print from photo>, then press [OK].
The photo placement guidance screen is displayed.
(2)
3
Load the photos on the Platen Glass.
(1) Lift the Document Cover.
(2) Load the photos on the Platen Glass.
Place the photos face down on the Platen Glass as follows.
0.4"/ 10 mm
0.4"/ 10 mm
0.4"/ 10 mm
0.4"/ 10 mm
0.4"/ 10 mm
4"x 6"/ 101.6 x 152.4 mm or 5"x 7"/
127 x 177.8 mm sized originals
Chapter 4
0.4"/ 10 mm
0.4"/ 10 mm
Credit Card-sized originals
Photo Printing from Photo or Film
61
Note
4
z Place the photograph(s) at least 0.4" / 10 mm away from and in square
with the edges of the Platen Glass.
z The Skew Correction function automatically compensates for
photographs placed at a slant of up to approximately 10 degrees. If the
slant is too large and the photograph fails to scan in,
will be
displayed on the preview screen. Reset the photos, and scan them
again.
z When setting two or more photographs at the same time, place them
at least 0.4" / 10 mm apart from each other. If photographs are placed
closer, they may be scanned as a single image.
z Slanted photographs with a long edge of 7.1" / 180 mm or more
cannot be corrected.
z Photographs smaller than approx. 1" / 25 mm square will not be
scanned properly.
z The types of photographs listed below may not be scanned properly.
– Non-rectangular or irregular shaped (such as cut out photos)
– Photographs that are entirely white
z The borders of bordered photographs may not be scanned properly.
Perform trimming if necessary.
Slowly close the Document Cover and press [OK].
The photograph is scanned.
Note
z The photo or film is rescanned before printing starts. Do not open the
Document Cover or remove the photo or film from the Platen Glass
until printing is complete.
z Press [PHOTO/FILM] when loading the other photos. If <Do you want
to clear the scanned photo?> appears on the LCD, select <Yes>,
press [OK] to delete the previous image data, then go to main step 2.
Scanning a Film
This section describes how to scan 35 mm film strips and slides. Also mount film in the film guide in
the same way as that of scanning with the machine when scanning films from your computer.
35 mm film strip
1
35 mm slide
Press [ON/OFF] to turn on the machine.
See “Turning the Machine ON and OFF” on page 17.
62
Photo Printing from Photo or Film
Chapter 4
2
Select the type of original to scan.
(1) Press [PHOTO/FILM].
(2) Use [ ] or [ ] to select <Print from film>, then press [OK].
The film placement guidance screen is displayed.
(2)
3
Select the type of film to scan.
(1) Use [ ] or [ ] to select the type of film to scan.
The following type of film can be selected.
Color negative film, Black & white negative film, Color positive film, and Mount (for slides)
(2) Press [OK].
The procedure to set the film is displayed.
Follow the screen to load the film. Press [OK] to move to the next display.
4
Remove the film guide.
(1) Remove the FAU Protective Sheet from the Document Cover.
Chapter 4
Photo Printing from Photo or Film
63
(2) Remove the film guide for film strips from the rear of the FAU Protective Sheet.
Note
5
Before scanning 35 mm slides, prepare the film guide for slides provided
with the machine.
Mount film in the appropriate film guide as described below.
z Mounting a 35 mm Film Strip:
(1) On the film guide, open the film holder.
Gently squeeze in the edges (A) of the film holder to release it (B).
(A)
(B)
(2) Mount the film in the film guide with the front side (the side showing the correct image)
face down. Pass the tip of the film under the tabs of the film guide, then position the film
in the film guide so that the spaces between frames are aligned with the white line mark
of the film guide.
64
Photo Printing from Photo or Film
Chapter 4
(3) Close the film holder completely with squeezing it inward while pressing.
Note
z Ensure that all the tabs on its outer edges fit into the slots in the film
guide when closing the film holder. If the film holder is floating, press
the whole downward.
z If the film holder will not close properly, reposition the film so that its
perforations are set properly in the film guide slots, and try again.
(4) With the front side of the film (the side showing the correct image) face down, align the
film guide with the indentations on the right and left sides of the Platen Glass.
Note
z When placing film strips that are shorter than the film guide, part of an
image near the open area may appear pale. In this case, place black
paper over the open area to shield it.
z Labels attached to areas of the film without images may be interpreted
as images and be included in the scan.
z Mounting 35 mm Slides:
(1) Align the film guide with the indentations on the right and left sides of the Platen Glass.
Chapter 4
Photo Printing from Photo or Film
65
(2) Mount the slides in the film guide with the front side (the side showing the correct image)
face down and with the image upside down. Load the slides in the landscape orientation,
making sure they are not loose in the film guide.
Important
The images may be unsatisfactory if the film is set beyond the reference
position (A) indicated by the white line. Do not set the film beyond the
reference position.
(A)
Note
z Film is scanned in the order from left to right.
z Mount the film in the film guide with the upper edge of the photograph
towards you to prevent the scanned photographs from being displayed
upside down on the LCD. Depending on the model or brand of your
camera, the scanning order may differ from the frame order of the film.
Order to scan
35 mm film strip
66
Photo Printing from Photo or Film
35 mm slides
Chapter 4
6
Slowly close the Document Cover and press [OK].
The film is scanned.
Note
z The photo or film is rescanned before printing starts. Do not open the
Document Cover or remove the photo or film from the Platen Glass
until printing is complete.
z If the film was not scanned properly, see “Cannot Scan Films” on
page 118.
z Press [PHOTO/FILM] when loading another film. If <Do you want to
clear the scanned photo?> appears on the LCD, select <Yes>, press
[OK] to delete the previous image data, then go to main step 2.
Printing Photographs
Let's select a scanned photo and specify the number of prints, and print it.
„ Printing Photo Displayed on the LCD (Single-photo print)
Print a scanned photo.
1
Prepare for printing.
(1) Load paper.
See “Loading Paper” on page 19.
(2) Ensure that the proper paper source is selected.
See “Changing the Paper Source” on page 23.
Note
Specify [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when
feeding paper from the Auto Sheet Feeder and the Cassette Lamp is lit
when feeding paper from the Cassette.
(3) Scan a photo or a film.
See “Scanning a Photo” on page 61 or “Scanning a Film” on page 62.
2
Select the print menu.
(1) Use [ ] or [ ] to select <Single-photo print>, then press [OK].
The photo selection screen is displayed.
(2)
Chapter 4
Photo Printing from Photo or Film
67
3
Select the photo you want to print.
(1) Use [
] or [
] to display the photo you want to print.
(2) Press [Color] or [Black].
The print confirmation screen is displayed.
You can do...
z To print a specified area (Trimming), see “Printing a Specified Area
(Trimming)” on page 69.
Note
4
Start printing.
(1) Check the page size and media type.
Press [Settings] to check or change the page size, media type, or other
settings. See “To Change Print Settings” on page 34.
Note
(2) Use [
] or [
] to specify the number of prints.
(2)
(1)
(3) Press [Color] to print in color, or [Black] to print in black & white.
The machine starts printing.
To cancel printing, press [Stop/Reset].
Note
„ Specifying How Many Copies to Print for Each Photo (Multi-photo print)
You can specify the number of prints to be made for each photo.
1
Prepare for printing.
See “Prepare for printing.” on page 67.
2
Select the print menu.
(1) Use [ ] or [ ] to select <Multi-photo print>, then press [OK].
The photo selection screen is displayed.
3
Specify the number of prints for each photo.
(1) Use [
] or [
(2) Use [
] or [
] to select the image you want to print.
] to specify the number of prints.
(2)
(3) Repeat from step (1) to step (2) to specify the number of prints for each photo.
68
Photo Printing from Photo or Film
Chapter 4
(4) Press [OK].
The print confirmation screen is displayed.
You can do...
z To print a specified area (Trimming), see “Printing a Specified Area
(Trimming)” on page 69.
Note
4
Start printing.
(1) Confirm the settings.
To change any of the settings, press [Settings].
See “Changing the Print Settings” on page 34.
(2) Press [Color] or [Black].
The specified number of copies of each photo will be printed.
Other Useful Functions
„ Printing a Specified Area (Trimming)
You can edit images displayed on the LCD by cropping them.
For detailed operations, see “Printing a Specified Area (Trimming)” on page 52.
„ Printing on the Sticker (Sticker print)
You can print your favorite photo on Canon Photo Stickers to create your own stickers.
1
Prepare for printing.
See “Prepare for printing.” on page 67.
z When you use this function, load paper in the Auto Sheet Feeder.
z You can only load one sheet of stickers at a time in the Auto Sheet
Feeder.
Note
2
3
Select the print menu.
(1) Use [
] or [
] to select <Special photo print>, then press [OK].
(2) Use [
] or [
] to select <Sticker print>, then press [OK].
Select the layout for the sticker you want to print.
See “Select the layout for the sticker you want to print.” on page 54.
Note
4
When printing stickers in Photo/film mode, you cannot print frames.
Select the photo you want to print.
(1) Use [ ] or [ ] to display the photo to print, then press [OK].
The print confirmation screen is displayed.
Note
Chapter 4
You can do...
To print a specified area (Trimming), see “Printing a Specified Area
(Trimming)” on page 52.
Photo Printing from Photo or Film
69
5
Start printing.
See “Start printing.” on page 68.
„ Printing All Photos (Print all photos)
You can print all scanned photos.
1
Prepare for printing.
See “Prepare for printing.” on page 67.
2
3
Select the print menu.
(1) Use [
] or [
] to select <Special photo print>, then press [OK].
(2) Use [
] or [
] to select <Print all photos>, then press [OK].
Start printing.
See “Start printing.” on page 68.
70
Photo Printing from Photo or Film
Chapter 4
Chapter 5
Printing Photographs Directly from a
Compliant Device
Connecting a PictBridge compliant device such as a digital camera, camcorder or mobile phone to
the machine allows you to print recorded images directly without using a computer.
Note
z PictBridge is an industry standard enabling a range of digital photo solutions,
including the direct printing of photos from a digital still camera, camcorder or
mobile phone* without the need to use a computer.
z It is possible to specify which images to print and various print settings from
the operation panel of your camera or mobile phone.
z Canon Bubble Jet Direct allows you to print photos from a Canon Bubble Jet
Direct compatible (PictBridge incompatible) digital camera or digital video
camcorder without a computer, by simply connecting the digital camera or
digital video camcorder to this machine.
For details, see “Printing Photographs Directly from a Canon Bubble Jet
Direct Compatible Digital Camera” on page 76.
* Hereafter, the digital still camera, digital camcorder, and camera-equipped
mobile phone compatible with PictBridge are collectively called a PictBridge
compliant device.
(A)
(B)
(A) This mark indicates that the product is PictBridge-compatible. See “Printing Photographs
Directly from a PictBridge Compliant Device” on page 73.
(B) See “Printing Photographs Directly from a Canon Bubble Jet Direct Compatible Digital
Camera” on page 76.
Connecting to a PictBridge Compliant Device
To connect a PictBridge compliant device to this machine, use the USB cable supplied with the
device.
Caution
Chapter 5
Do not connect any equipment other than PictBridge compliant devices, Canon
Bubble Jet Direct compatible digital cameras or optional Bluetooth Units BU-20
to the Direct Print Port of the machine. If you do so, electric shock, fire, or
damage to the device could result.
Printing Photographs Directly from a Compliant Device
71
When printing photos with the digital device connected to the machine, it is
advisable to use the AC adapter supplied with the device. If you use the device
battery, be sure to charge it fully.
Note
1
Set up the machine.
Refer to the Easy Setup Instructions to set up the machine and make it ready for printing.
Note
2
The Print Head cannot be aligned using the controls of the digital device.
If the Print Head alignment is not yet performed, execute automatic Print
Head alignment, see “Aligning Print Head automatically” on page 108.
Turn on the machine.
See “Turning on the Machine” on page 17.
3
Load the paper in the machine.
See “Loading Paper” on page 19.
4
Connect the PictBridge compliant device to the machine.
Note
Depending on the model or brand of your device, you may have to select
a print mode compliant with PictBridge before connecting the device.
You may also have to turn on the device or select Play mode manually
after connecting the device to the machine.
Perform necessary operations according to the instruction manual
supplied with the PictBridge compliant device.
(1) Ensure that the device is turned off.
(2) Connect the device to the machine using the USB cable (for connection to a computer)
supplied with the device.
Note
72
Some types of the PictBridge compliant devices do not turn on
automatically, when connected to the machine. If the device does not turn
on automatically, turn it on manually.
Printing Photographs Directly from a Compliant Device
Chapter 5
(3) Turn on and set up the device for direct printing.
Either of the following icons will display on the LCD display of the device when the
machine is correctly connected.
A PictBridge compliant device.
A Canon Bubble Jet Direct compatible digital camera.
Note
If neither of these icons appear, see “Cannot Print Properly from the
Digital Camera” on page 130.
Printing Photographs Directly from a PictBridge
Compliant Device
When operating the device, be sure to follow the instructions given in the instruction manual supplied
with the PictBridge compliant device. Let’s take a look at the page size, media type, layout, image
optimization modes, and date/file no. printing that can be set on a PictBridge compliant device
connected to the machine.
„ Checking or Changing PictBridge Print Settings from Your Camera
To change the page size or media type operate the device to select the PictBridge print setup
mode and confirm or change the settings.
The settings below can be changed by pressing [Settings] in Memory card mode of this machine
when a PictBridge compliant device is connected. However, changes can be made on the
Settings screen (Memory Card) only when the corresponding items below are in the “Default”
setting items (selections based on the machine setting) using the controls of the device.
PictBridge compliant device
setting items
Machine setting on the Print Setting screen
Page size : Default
You can change the machine settings of (1), (2), and (4)
on tab 1 in Memory card mode.
For the setting items, see “Memory card and Photo/film
modes” on page 36.
Media type : Default
Layout : Default
Image optimize : Default
You can change the machine settings on tab 2 in Memory
card mode.
For the setting items, see “Memory card and Photo/film
modes” on page 36.
About the Settings Explained below
The settings explained on the following pages cannot be made on some PictBridge compliant
devices. If any setting cannot be made, the machine setting is used.
* Names of settings that are displayed on Canon PictBridge compliant device are used in the
description given below. Different names may be displayed on the PictBridge compliant device
depending on the brand or model.
About Image Data Format for Printing
This machine accepts images* taken with a camera compatible with the Design rule for Camera
File System and PNG files.
* Exif2.21 compliant
Chapter 5
Printing Photographs Directly from a Compliant Device
73
About “Page size” and “Media type”
When the “Default” (selections based on the machine setting) is selected, the machine operates
based on the <Page size> and the <Media type> settings specified in the Memory card mode of
the machine.
To print on Photo Paper Pro, select “Fast Photo” from “Media type” on the display of the
PictBridge compliant device. Select “Photo” for Photo Paper Plus Glossy.
The following sizes and types of paper can be loaded in the machine by selecting options from
“Page size” and “Media type”.
“Page size” setting
“Media type” setting
Paper loaded in machine
10 x 15 cm/4" x 6"
Photo
Photo Paper Plus Glossy
Fast Photo
Photo Paper Pro
Photo
Photo Paper Plus Semi-gloss
Photo
Glossy Photo Paper
Glossy Photo Paper "Everyday
Use"
Photo Stickers*1
13 x 18 cm/5" x 7"*2
Photo
Photo Paper Plus Glossy
A4/8.5" x 11" (Letter)*3, *4
Photo
Photo Paper Plus Glossy
Fast Photo
Photo Paper Pro
Photo
Photo Paper Plus Semi-gloss
Photo
Glossy Photo Paper
A4
Photo
Glossy Photo Paper "Everyday
Use"
5.4 x 8.6 cm/Credit Card
Photo
Glossy Photo Paper
You may not be able to purchase some Canon branded paper depending on your country.
*1
This paper is exclusively used to print photo stickers. When printing on sticker paper, select 10
x 15 cm / 4" x 6" in “Page size”.
*2 This size can be selected only for Canon PictBridge compatible devices (note that it cannot be
selected for some models).
*3
“Plain Paper” can be selected for “Media type” when A4 or 8.5" x 11" (Letter) is selected for
“Page size”. When “Plain Paper” is selected for “Media type”, bordered printing will be performed
even when “Borderless” is selected for “Layout”.
*4
When A4 or 8.5" x 11" (Letter) is selected for “Page size”, you can print in 4-up layout.
About “Layout” and “Trimming”
For “Layout”, when the “Default” (selections based on the machine setting) is selected, the
machine operates based on the print setting specified in the Memory card mode of the machine.
Trimming is performed based on settings on the PictBridge compliant device.
74
Printing Photographs Directly from a Compliant Device
Chapter 5
Note
z When printing onto Photo Stickers (PS-101) (16-up), use the following
settings.
1. Select the Auto Sheet Feeder as the paper source.
For details, see “Loading the Print Media in the Auto Sheet
Feeder” on page 24.
Always load Photo Stickers (PS-101) in the Auto Sheet Feeder.
2. Select 10 x 15 cm / 4" x 6" for the “Page size”, and “Photo” for the
“Media type”.
3. Select N-up for layout, then select 16-up.
z Some PictBridge compliant devices display the Layout option; 2-up, 4up, 9-up, and 16-up. In this case always select 16-up.
z If there are no options on the PictBridge compliant device that
correspond to 2-up, 4-up, 9-up, or 16-up, printing on stickers is not
possible.
z When you using Photo Stickers (PS-101), do not set “Borderless” in
“Layout” settings.
About “Image optimize”
When the “Default” (selections based on the machine setting) is selected, the machine operates
based on the tab 2 of the print setting specified in Memory card mode of the machine. For the
setting items, see “Print Setting Items” on page 35.
If you use a Canon PictBridge compatible device, you can select “VIVID”, “NR”, “VIVID+NR”, or
“Face”. (Note that these options cannot be selected for some models.)
Note
z When “VIVID” is selected, green and blue portions of photos are
printed vividly.
z When “NR” (Noise Reduction) is selected, noise in blue portions, such
as the sky, and dark portions is removed.
z When “VIVID+NR” is selected, functions of both “VIVID” and “NR” are
performed.
z When “Face” is selected, backlit images are corrected when printed.
About “Date/File No. print”
You cannot change this setting on this machine.
Selections of this setting will be based on that of the PictBridge compliant device.
If you select an image which has had the shooting date embedded in it using a camera with the
print mode, select “Off” for this function. If you select “Date”, “File No.”, or “Both”, the date and/or
file number will be printed over the embedded date.
Other Settings
If you use a Canon PictBridge-compliant device, you can use the following print settings.
(Note that these print settings cannot be used for some models.) For details, refer to your
device’s instruction manual.
z Shooting Info (Exif Data)
You can print shooting Info (Exif Data) on photos in list format, or in the margins of specified
photos.
Select Layout, then select the item displayed with the [i] icon.
z 35mm Film Style Layout (Contact Printing Layout)
You can print selected photos or index-specified photos in 35 mm film style layout (contact
printing layout).
Select Layout, then select the item displayed with the film icon.
Chapter 5
Printing Photographs Directly from a Compliant Device
75
Note
z Never disconnect the USB cable during printing.
z When disconnecting the USB cable between the PictBridge compliant
device and machine, follow the instructions given in the device’s
instruction manual.
z Controls of the device cannot be used for the following:
– Print quality setting
– Machine maintenance
Printing Photographs Directly from a Canon Bubble
Jet Direct Compatible Digital Camera
The following is a list of media types that can be set on the Canon Bubble Jet Direct compatible
digital camera or digital video camcorder (PictBridge incompatible) along with their limitations when
connected to this machine.
To connect the compatible digital camera to this machine, use the USB cable for
the computer connection supplied with the camera.
For details on connection, see “Connecting to a PictBridge Compliant Device”
on page 71.
Note
„ Media Types for Digital Camera
When you connect a digital camera, you can use the following media:
Digital Camera Setting
Media Type
Card #1
Photo Paper Pro 4" x 6" / 101.6 x 152.4 mm
Card #2
Photo Paper Plus Glossy 4" x 6" / 101.6 x 152.4 mm
Photo Paper Plus Semi-gloss 4" x 6" / 101.6 x 152.4 mm
Glossy Photo Paper 4" x 6" / 101.6 x 152.4 mm
Glossy Photo Paper "Everyday Use" 4" x 6" /101.6 x 152.4
mm
Card #3
Photo Paper Plus Glossy 5" x 7" / 127.0 x 177.8 mm
LTR
Photo Paper Pro Letter
Photo Paper Plus Glossy Letter
Photo Paper Plus Semi-gloss Letter
Glossy Photo Paper Letter
A4
Photo Paper Pro A4
Photo Paper Plus Glossy A4
Photo Paper Plus Semi-gloss A4
Glossy Photo Paper A4
Glossy Photo Paper "Everyday Use" A4
76
Printing Photographs Directly from a Compliant Device
Chapter 5
You may not be able to purchase some Canon branded paper depending on your country.
„ Printing Directly from a Digital Camera or a Digital Video Camcorder
This section describes how to print after connecting a camera to the machine.
Note
1
z For the digital camera operation method and troubleshooting, refer to
your digital camera manual.
z For print error messages, see “Cannot Print Properly from the Digital
Camera” on page 130.
Display the image you want to print in replay mode.
z If the camera will not change to replay mode, refer to the manual supplied with your digital
camera for instructions how to.
z When the digital camera is correctly connected, the icon
digital camera.
2
will display on the LCD of the
Press [SET] on the digital camera.
The print setting menu is displayed on the LCD of the digital camera.
3
Select [Style] and specify the page size, bordered or borderless printing, and date
printing ON or OFF.
4
Specify the number of copies, select [Print], and then press [SET] on the digital
camera.
Note
Chapter 5
z By operating the digital camera, you can make the following prints:
– You can make a standard print from the image displayed in the single
display mode or in the index display mode.
– You can print specified numbers of images, or make an index print
by editing the DPOF.
* Images other than Exif may not be index printed.
– For the images taken with an ExifPrint compatible digital camera, the
ExifPrint function can be used.
– If date printing is set from the digital camera, the date when the
photograph was taken is to be printed (excluding the index print).
– Images will be scaled automatically according to the image size set
on the digital camera and the size of the media set on the machine.
z The digital camera does not support the following functions:
– Print quality setting
– Machine maintenance
z To disconnect the USB cable connecting the digital camera to the
machine, follow the procedure below:
1. Disconnect the USB cable from the machine.
2. Turn OFF the digital camera.
3. Disconnect the USB cable from the digital camera.
When disconnecting the USB cable, be sure to hold the connector
by its sides.
Printing Photographs Directly from a Compliant Device
77
Chapter 6
Printing Photographs from a Wireless
Communication Device
If you have a mobile phone with an infrared port for wireless data transmission, you can print photos
through a cordless connection with the machine. If the optional Bluetooth Unit BU-20 is connected to
the machine, you can also perform wireless printing from Bluetooth compatible mobile phones.
When printing photos through Infrared Communication:
z See “Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone” on
page 78.
z See “Performing Infrared Communication” on page 79.
When printing photos through Bluetooth Communication:
z See “Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone” on
page 78.
z See “Performing Bluetooth Communication” on page 81.
Setting the Page Size, Media Type, and Layout When
Printing from a Mobile Phone
You can select the page size, media type, layout and borderless printing on the Wireless print
settings screen when printing from a mobile phone through Infrared communication or Bluetooth
communication. For how to print from a computer through Bluetooth communication, refer to the
Bluetooth User ’s Guide.
* The initial setting is borderless printing on 4" x 6" Photo Paper Plus Glossy.
„ Displaying the Wireless Print Screen and Specifying the Settings
1
Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 17.
2
Display the Wireless print settings screen.
(1) Press [Menu].
(2) Use [
] or [
] to select <Maintenance/settings> and then press [OK].
(3) Use [
] or [
] to select <Device settings> and then press [OK].
(4) Use [ ] or [ ] to select <Wireless print settings> and then press [OK].
The Wireless print settings screen is displayed.
3
Confirm or change the settings.
(1) Use [
] or [
] to select the item to set.
(2) Use [
] or [
] to change the setting.
(3) Press [OK] after finishing all settings you need.
The photos in the mobile phone can be printed according to the following settings.
78
Printing Photographs from a Wireless Communication Device
Chapter 6
„ Setting Items
(1)
(2)
(3)
(4)
(1) Select the page size for the wireless print.
(2) Select the media type for the wireless print.
Note
For information on wireless print compatible page size and type, see
“Recommended Paper and Requirements” on page 19.
(3) Correct the contours and smoothes out the jaggedness.
Image optimizer ON, Image optimizer OFF
(4) Select the layout of the photos as below.
Sticker print:
Stickers x 16
Printing on paper other than sticker:
Bordered x 1, x 2, x 4, x 8
Borderless x 1, x 2, x 4, x 8
Mixed 1, 2, 3
Note
z <Mixed 1>, <Mixed 2>, or <Mixed 3> can be selected only when the
page size setting is <8.5" x 11" (215.9 x 279.4)> or <A4>.
z When printing on Canon Photo Stickers, make the settings as below.
Page Size
Media Type
Layout
Sticker
Photo Paper Plus Glossy
Stickers x 16
Performing Infrared Communication
You can print photos in your mobile phone.
When printing through infrared communication, also refer to your mobile phone manual.
1
Prepare for printing.
(1) Press [ON/OFF] to turn on the machine.
See “Turning the Machine ON and OFF” on page 17.
(2) Load paper.
See “Loading Paper” on page 19.
(3) Ensure that the proper paper source is selected.
See “Changing the Paper Source” on page 23.
2
Set the print setting.
See “Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone” on
page 78.
3
Start Infrared Communication.
Chapter 6
Printing Photographs from a Wireless Communication Device
79
(1) Oppose the infrared port of the mobile phone (D) to that of the machine (B) at a distance
of less than 7.87" / 20 cm (C).
Note
z The effective angle of the IrDA port of the machine is about 10° from
the central axis in both vertical and horizontal directions (A).
z The allowable distance of communication with the machine depends
on the mobile phone you use. For this distance, refer to your mobile
phone manual.
(B)
(C)
(A)
(D)
(2) Select the photo to print and send the data to the machine using the infrared
communication function of the mobile phone.
Printing will start after receiving all data.
Note
80
z To perform printing correctly from a mobile phone through infrared
communication, the following conditions should be satisfied.
– Compatible devices: The mobile phones with an IrDA port,
compatible image data transmitting through Infrared communication
– Printable data: Shooting image with the camera of the mobile phone
z For the procedure to print from your mobile phone, refer to your mobile
phone manual.
z Do not place any obstacle between the infrared ports of the machine
and mobile phone. Data cannot be transmitted between them.
z During printing, be careful not to interrupt infrared communication with
the machine. If it is interrupted, send the data from the mobile phone
again.
z Depending on your device, the Fine print quality option may not be
available due to the restriction on the infrared transfer capacity.
z We recommend printing on sticker or credit card sized paper when the
print quality on other types of paper is not fine.
About transmittable data
z It does not support printing a downloaded content or photo and a
photo attached to an E-mail for security reason.
z It does not support printing video files.
z Depending on the size of a photo, it may take a while for this machine
to start to print after starting the infrared transfer.
z Depending on your device, it may not print data stored in a memory
card.
z It automatically sets the photo quality and orientation (horizontal or
landscape) according to the photo size.
z It automatically sets to the margin according to the photo size.
Printing Photographs from a Wireless Communication Device
Chapter 6
Performing Bluetooth Communication
This section explains the procedure to print photos through Bluetooth communication from the
mobile phone with the optional Bluetooth Unit BU-20.
For the procedure to print through Bluetooth communication from the computer, refer to the
Bluetooth User's Guide.
Note
The mobile phone supporting the OPP (Object Push Profile) or BIP (Basic
Image Profile) can print photos. For details of profiles, refer to your product's
instruction manual.
„ Printing through Bluetooth Communication
When you print through Bluetooth communication from a mobile phone, refer to your mobile
phone manual.
1
Prepare for printing.
(1) Press [ON/OFF] to turn on the machine.
See “Turning the Machine ON and OFF” on page 17.
(2) Load paper.
See “Loading Paper” on page 19.
(3) Ensure that the proper paper source is selected.
See “Changing the Paper Source” on page 23.
2
Connect the Bluetooth Unit BU-20 to the Direct Print Port.
3
Set the print setting.
See “Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone” on
page 78.
4
Start printing from a mobile phone.
z When you select the device name, select the initial value "Canon MP950-1."
z If you are required to enter the passkey, enter the initial value "0000."
z You can change the device name of the machine, passkey, and so on in Bluetooth settings
on the machine. See “Changing the Bluetooth Settings - Bluetooth settings” on page 82.
Chapter 6
Printing Photographs from a Wireless Communication Device
81
z Communication is possible up to about 32.8 ft/10m depending on the
conditions below. The printing speed may change depending on the following
conditions:
– Presence of obstacles between the communication equipment and radio
wave conditions.
– Presence of magnetic fields, static electricity or electromagnetic
interference.
– Receiver sensitivity and antenna performance of the communication
equipment.
z For the transmittable data, see “About transmittable data” on page 80.
Note
„ Changing the Bluetooth Settings - Bluetooth settings
You can change the device name of the machine, passkey, and so on in Bluetooth settings.
1
Press [ON/OFF] to turn on the machine.
See “Turning the Machine ON and OFF” on page 17.
2
3
Connect the Bluetooth Unit BU-20 to the Direct Print Port.
Display the Bluetooth settings screen.
(1) Press [Menu].
4
(2) Use [
] or [
(3) Use [
] or [
] to select <Maintenance/settings> and then press [OK].
] to select <Device settings> and then press [OK].
(4) Use [
] or [
] to select <Bluetooth settings> and then press [OK].
Confirm or change the settings.
(1) Use [
] or [
(2) Use [
], [
] to select the item to set.
], [
], [
] to select the item.
(3) Press [OK] after finishing all settings you need.
„ Setting Items
<Device name>:
Select the device name of this machine displayed on the screen of the
Bluetooth devices.
When you set <MP950-2> the machine name on the Bluetooth device is
"Canon MP950-2."
The initial value is set to <MP950-1>.
<Access refusal>: Selecting <ON> will disable search this machine from Bluetooth devices.
<Security>:
Selecting <Enable> will enable a passkey to be set or changed. Setting a
passkey will prevent incorrect access from other Bluetooth devices.
<Passkey>:
You can change the passkey. The passkey refers to an identification
number to be determined. It is used to prevent incorrect access from
other Bluetooth devices.
The initial value is set to <0000>.
After you change the passkey, you are required to enter the new passkey
again. Enter the new passkey to Bluetooth device.
82
Printing Photographs from a Wireless Communication Device
Chapter 6
Chapter 7
Printing from Your Computer
This section describes the basic printing procedure, taking the steps to print documents as an
example.
Printing with Windows
z Menu and command names may differ between application softwares, and
more steps may be required. For details, refer to the documentation for each
application software you use.
z The steps described in this section are for printing in Windows XP Service
Pack 2 (hereafter, called Windows XP SP2).
Note
1
Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 17.
2
Load the paper in the machine.
See “Loading Paper” on page 19.
3
Ensure that the proper paper source is selected.
When the Auto Sheet Feeder Lamp (A) is lit, paper is fed from the Auto Sheet Feeder.
When the Cassette Lamp (B) is lit, paper is fed from the Cassette.
(A)
(B)
Note
4
5
Specify [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when
feeding paper from the Auto Sheet Feeder and the Cassette Lamp is lit
when feeding paper from the Cassette.
Create a document or open a file to print from the application software.
Open the printer properties dialog box.
(1) Select [Print] from the application software’s [File] menu.
The [Print] dialog box opens.
(2) Ensure that your machine is selected.
Note
Chapter 7
If another name of the machine is selected, click the name of the
machine to use.
Printing from Your Computer
83
(3) Click [Preferences] or [Properties].
The [Main] tab of the [Printing Preferences] screen is displayed.
(2)
(3)
6
Specify the required settings.
(1) Click [Media Type] to select the type of media loaded in the machine.
(2) Ensure that [Paper Feed Switch] is selected from [Paper Source].
(3) Specify the print quality and other settings in [Print Quality] or [Color/Intensity].
Note
For print settings, refer to the Printer Driver Guide.
(4) Click [OK].
The [Print] dialog box opens.
(1)
(2)
(3)
(4)
84
Printing from Your Computer
Chapter 7
Note
7
z To confirm the page size, click on the [Page Setup] tab. If it does not
match the document size set by the application software, select the
matching page size.
z This section describes the procedure for selecting [Paper Feed
Switch] from [Paper Source]. For a detailed description of the [Paper
Source] settings, refer to the Printer Driver Guide.
z For details about other printer driver functions, click [Instructions] or
[Help] to view the Printer Driver Guide. [Instructions] is only displayed
when the Printer Driver Guide is installed.
z Selecting the [Preview before printing] check box displays a preview
screen that allows you to confirm the selected printing effects and how
your document will look when printed. Some application softwares do
not have a preview function.
Print the document.
(1) Click [Print] or [OK].
The machine starts printing.
(1)
Note
z You can cancel a print job in progress by simply pressing [Stop/Reset]
on the machine.
z Click [Cancel Printing] on Canon IJ Status Monitor to stop printing. To
show Canon IJ Status Monitor, click [Canon MP950 Series Printer] on
the taskbar.
Printing with Macintosh
Note
1
z Menu and command names may differ between application softwares, and
more steps may be required. For details, refer to the documentation for each
application software you use.
z The steps described in this section are for printing in Mac® OS X v.10.3.x.
Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 17.
Chapter 7
Printing from Your Computer
85
2
Load the paper on the machine.
See “Loading Paper” on page 19.
3
Ensure that the proper paper source is selected.
When the Auto Sheet Feeder Lamp (A) is lit, paper is fed from the Auto Sheet Feeder.
When the Cassette Lamp (B) is lit, paper is fed from the Cassette.
(A)
(B)
Note
4
5
Specify [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when
feeding paper from the Auto Sheet Feeder and the Cassette Lamp is lit
when feeding paper from the Cassette.
Create a document or open a file to print from the application software.
Select the page size.
(1) Select [Page Setup] from the application software’s [File] menu.
The [Page Setup] dialog box opens.
(2) Confirm that [MP950] is selected in [Format for].
(3) Select the desired page size from [Paper Size].
(4) Click [OK].
(2)
(3)
(4)
6
Specify the required settings.
(1) Select [Print] from the application software’s [File] menu.
The [Print] dialog box opens.
(2) Select [Quality & Media] from the pop-up menu.
(3) Select the desired media type from [Media Type].
(4) Ensure that [Paper Feed Switch] is selected from [Paper Source].
86
Printing from Your Computer
Chapter 7
(5) Select the print mode appropriate to your document from [Print Mode].
(2)
(3)
(4)
(5)
Note
7
z This section describes the procedure for selecting [Paper Feed
Switch] from [Paper Source]. For a detailed description of the [Paper
Source] settings, refer to the Printer Driver Guide.
z When you select the print mode appropriate to your document from
[Print Mode], the document will be printed in color and at a print quality
suited to the characteristics of the [Media Type] you have selected.
– [Printing a top-quality photo]: Select when printing documents
consisting mainly of photographs and graphics featuring fine color
gradation.
– [Printing tables and charts]: Select when printing documents
consisting mainly of graphs and graphics (illustrations) with strong
color definition.
– [Printing a composite document]: Select when printing documents
consisting mainly of text.
– [Detailed Setting]: Select to fine-tune the [Print Quality] and
[Halftoning] settings.
z For details about other printer driver functions, click
to view the
Printer Driver Guide. If the Printer Driver Guide is not installed, the
Printer Driver Guide is not displayed even if
is clicked.
z Clicking [Preview] displays a preview screen that allows you to confirm
the selected printing effects and how your document will look when
printed. Some application softwares do not have a preview function.
Print the document.
(1) Click [Print].
The machine starts printing.
Note
Chapter 7
Double-clicking the name of your machine in the [Printer List] of the
[Printer Setup Utility] (When using Mac OS X v.10.2, double-clicking the
name of your machine in the [Printer list] of the [Print Center]) displays a
dialog that prompts you to confirm the status of the print job(s). To cancel
a job in progress, select the desired document, then click [Delete]. To
temporarily stop a job in progress, click [Pause]. To cancel all the jobs in
the list, click [Stop Printing].
Printing from Your Computer
87
Chapter 8
Scanning Images
This section describes how to scan images.
About Scanning Images
You can scan images from the machine to a computer without printing them and save them in
popular file formats, such as JPEG, Tiff, Bitmap. Scanned data saved on your computer can be
processed using image processing software. Furthermore, you can use the OCR (Optical Character
Recognition) software to convert scanned paper documents to text data.
„ Before Scanning
Before scanning images, confirm the following:
z Are the necessary software (MP Drivers and MP Navigator) installed?
If the software is not yet installed, refer to the Easy Setup Instructions.
z Does the document to be scanned meet the requirements for an original to be set on the
Platen Glass?
For details, see “Loading Documents” on page 18. For details on setting film originals, see
“Scanning a Film” on page 62.
z Is the machine connected to a computer correctly?
Confirm that the connection between the machine and the computer is physically secure.
Scanning Methods
„ Scanning Using the MP Navigator
MP Navigator enables you to scan in documents loaded on the Platen Glass and view images
saved on your computer or on a memory card. Scanned documents can be previewed and be
easily printed and edited according to your needs.
You can use the supplied application software to edit or print the document you have scanned.
Double-click the [MP Navigator 2.0] icon on your desktop to launch MP Navigator.
Select [Applications] from the [Go] menu, then double-click the [MP Navigator 2.0] icon to launch
MP Navigator.
You can launch the following application software from the MP Navigator.
z Easy-PhotoPrint (Photo Printing)
z ArcSoft PhotoStudio (Photo image editing)
z ScanSoft OmniPage SE (Converting scanned document to text)*
* This application software may not be supplied with this machine in some country.
Note
88
If you did a [Custom Install] and only installed the MP Driver and MP
Navigator, these application softwares were not installed and thus cannot
be launched. To launch any of the above application software from MP
Navigator, do a [Custom Install] once again to install them.
Scanning Images
Chapter 8
For detailed operations of the MP Navigator, refer to the Scan Guide.
„ Scanning Using the Operation Panel of the Machine
You can scan documents to your computer by using the Operation Panel on the machine.
Important
Do not insert or remove USB cables when scanning images with the
machine connected to a computer, or when the computer is at sleep or
standby mode.
z If you are using Windows XP
The program selection screen is displayed the first time you press [Color] or [Black] on the
machine. Specify [MP Navigator Ver2.0] as the application software to use, check [Always
use this program for this action], then click [OK]. From the next time, MP Navigator is
automatically started.
z When using Mac OS X
For the machine to start scanning when [Color] or [Black] is pressed, you need to set MP
Navigator as the starting application software in Image Capture under [Applications] of Mac
OS X.
Important
z If you are using Mac OS X v.10.4, the settings below are not
necessary.
z Make sure that the MP Navigator is installed and that the Macintosh is
connected to the machine before starting up Image Capture.
If you are using Mac OS X v.10.3.x
Select [Applications] from the [Go] menu, then double click [Image Capture]. Click
[Options] at lower left of the scanner window, select [MP Navigator 2.0] from [Application to
launch when scanner button is pressed], then click [OK].
Important
If you select [Preferences] from the [Image Capture] menu, click
[Scanner], and mark [Use TWAIN software whenever possible], [Options]
is not displayed. In this case, click [Use TWAIN software whenever
possible] to uncheck the option, exit the Image Capture, then start it
again.
If you are using Mac OS X v.10.2.4 or later
Select [Applications] from the [Go] menu, then double click [Image Capture]. Select
[Preferences] from the [Image Capture] menu. Select [Others] from [When a scanner
button is pressed, open], select [MP Navigator 2] from [Applications], then click [Open].
1
Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 17.
2
Load the document on the Platen Glass.
For details on how to load documents, see “Loading Documents” on page 18.
For details on setting film originals, see “Scanning a Film” on page 62.
Chapter 8
Scanning Images
89
3
Select the scan operation.
(1) Press [SCAN].
The scan process selection screen is displayed.
(2) Use [ ] or [ ] to select the scan operation, then press [OK].
Scan standby screen is displayed.
Save to PC:
Save as PDF file:
Attach to E-mail:
Open with application:
Scan film and save:
4
The document is scanned and saved.
The document is scanned and stored as a PDF file.
The document is scanned, and the image is attached to an e-mail
using the e-mail application software.
The document is scanned and displayed on the registered
application software.
The film is scanned and saved.
Press [Color] or [Black].
The document is scanned. The settings configured from MP Navigator apply when scanning.
Important
Note
If with some types of original the position and size of the image is not
scanned in correctly, please refer to “Selecting the Behavior of the
Operation Panel with MP Navigator” in the Scan Guide (On-screen
Manual) and change the MP Navigator [Document Type] and [Document
Size] to match those of the original being scanned.
The operation to be performed after scanning the document depends on
the scan operation setting you have selected in step 3. For details on how
to modify the operation settings, refer to the Scan Guide.
„ Scanning from an Application Software
You can scan an image from a TWAIN- or WIA- (Windows XP only) compliant application
software and handle the scanned image in the application software. For detailed operations,
refer to the Scan Guide.
90
Scanning Images
Chapter 8
Chapter 9
Reading from and Writing to a Memory
Card
Setting up the Card Slot as the Memory Card Drive of
the Computer
The Card Slot of the machine can also be used as the memory card drive of the computer.
Important
1
When <Read/write attribute> under <Device settings> is set to <Read/write
mode> using the Operation Panel of the machine, card direct printing cannot be
done. After using the Card Slot as the memory card drive of the computer,
remove the memory card, then be sure to set <Read/write attribute> to <Readonly mode>.
Display the Read/write attribute screen.
(1) Ensure that the memory card is not set.
If the memory card is set, remove it from the Card Slot. See “Inserting the Memory Card”
on page 46.
(2) Press [Menu].
2
(3) Use [
] or [
(4) Use [
] or [
] to select <Maintenance/settings> and then press [OK].
(5) Use [
] or [
] to select <Other settings> and then press [OK].
(6) Use [
] or [
] to select <Read/write attribute> and then press [OK].
] to select <Device settings> and then press [OK].
Specify the Read/write attribute.
(1) Use [
] or [
Read-only mode:
Read/write mode:
] to specify <Read/write attribute>.
The Card Slot is used only for reading. Be sure to select this
mode when printing photos from a memory card.
The Card Slot is used as the memory card drive of the
computer. Photo data can be written into the memory card.
(2) Press [OK].
Note
When using the Card Slot as the memory card drive of the computer, the
removal operation from the computer is needed before removing the
memory card from the machine.
Right-click the removable disk icon and click [Eject]. If [Eject] is not
displayed on the screen, ensure that the Access Lamp is not flashing and
remove the memory card.
Be sure to drag the
Chapter 9
icon into the Trash.
Reading from and Writing to a Memory Card
91
Chapter 10
Changing the Machine Settings
This section describes the procedure to change the settings in the Device settings screen, taking the
steps to specify Extended copy amount as an example.
1
Press [ON/OFF] to turn on the machine.
See “Turning the Machine ON and OFF” on page 17.
2
3
Press [Menu].
Display the Device settings screen.
(1) Use [ ] or [ ] to select <Maintenance/settings>, then press [OK].
The Maintenance/settings screen is displayed.
(1)
(2) Use [ ] or [ ] to select <Device settings>, then press [OK].
The Device settings screen is displayed.
(2)
4
Select the menu.
(1) Use [ ] or [ ] to select the setting item, then press [OK].
Example: select <Print settings>.
The setting screen for the selected item is displayed.
(1)
92
Changing the Machine Settings
Chapter 10
(2) Use [ ] or [ ] to select the menu, then press [OK].
Example: select <Extended copy amount>.
(2)
5
Change the settings.
(1) Use [ ] or [ ] to select the setting item, then press [OK].
Example: select <Small>.
(1)
The Print Settings
„ Quiet mode
Use this function if you want to reduce the operation noise, such as when printing at night.
Important
z The printing speed may be reduced compared to when this setting is
set to <OFF>.
z This function may not be so effective depending on the print quality
setting.
z Furthermore, certain noise, such as when the machine is preparing for
printing, is not reduced.
„ Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
Important
Be sure to revert this setting to <OFF> after printing since it may result in
lower print quality.
„ Extended copy amount
Selects the amount of image that extends off the paper when printing in Borderless (full).
Note
Chapter 10
z This setting can be applied only when Copy or Photo/film mode
selected.
z If you set <Large> for this function, the area of the image extending off
the paper becomes larger.
Changing the Machine Settings
93
Wireless Print Settings
For details, see “Setting the Page Size, Media Type, and Layout When Printing from a Mobile
Phone” on page 78.
„ Page size
Specifies the page size for printing photos saved on a mobile phone.
„ Media type
Specifies the media type for printing photos saved on a mobile phone.
„ Image optimizer
Choosing <Image optimizer ON> enables you to correct and smooth the jagged contours for
printing.
„ Layout print
Specifies the layout for the paper when printing photos saved on a mobile phone.
Note
<Mixed 1>, <Mixed 2>, or <Mixed 3> can be selected only when the page
size is set to <8.5" x 11" (215.9 x 279.4)> or <A4>.
Bluetooth Settings
For details, see “Changing the Bluetooth Settings - Bluetooth settings” on page 82.
„ Device name
Specifies the name of this machine that is displayed on a Bluetooth compatible device.
„ Access refusal
When this is set to <ON>, the machine refuses access from a Bluetooth compatible device.
„ Security
When this is set to <Enable>, the passkey can be specified.
„ Passkey
Changes the passkey.
94
Changing the Machine Settings
Chapter 10
Other Settings
„ Date display
Changes the display order for shooting dates to be printed.
Note
z When <Print date only> or <Print date & file no.> is selected for <Date/
file no.> in the tab 1 on the Settings (Memory Card) screen, the
shooting date is printed in the date display order you selected. For
Print settings, see “To Change Print Settings” on page 34.
z The shooting date format is as specified in the DPOF setting from
DPOF printing.
„ Read/write attribute
Selects whether to allow data to be written onto memory cards from a computer.
Important
If you set this setting to <Read/write mode>, card direct printing cannot be
done. After you finish operation of the memory card dedicated drive, be
sure to revert this setting to <Read-only mode>.
„ Power save setting
Specifies the time until Power saving is enabled.
You can select from <5 minutes>, <15 minutes>, <1 hour> or <8 hours>. The initial value is set
to <1 hour>.
„ Slide show setting
Specifies the image display quality of the slide show.
Note
When <Image quality: Std> is selected, images are displayed at 5-second
intervals. When <Image quality: High> is selected, images are displayed
at different time intervals according to their resolutions.
Language selection
Changes the language for LCD messages.
Reset setting
You can change the settings back to the default, except for the language for LCD messages and the
position of the Print Head.
Save settings
Saves the settings for the Settings screen.
Load settings
Loads the settings for the Settings screen that were saved.
Chapter 10
Changing the Machine Settings
95
Chapter 11
Routine Maintenance
Replacing an Ink Tank
When ink runs out, replace the ink tank. The machine will not print if the wrong type of ink tank is
used, or if it is installed in the incorrect position.
The machine uses the following ink tanks.
Black: CLI-8BK
Cyan: CLI-8C
Photo Cyan: CLI-8PC
Photo Magenta: CLI-8PM
Black: PGI-5BK
Yellow: CLI-8Y
Magenta: CLI-8M
Note
z Be sure to install the ink tanks in the correct order. The proper arrangement
from the left is Black , Photo Cyan , Black , Magenta ,
Cyan Magenta Yellow .
z Should missing characters or white streaks appear despite sufficient ink
levels, see “When Printing Becomes Faint or Colors are Incorrect” on
page 102.
96
Routine Maintenance
Chapter 11
Getting the Ink Level Information
You can check the ink tank status by the ink tank lamp display. Open the Scanning Unit (Printer
Cover) of the machine and check the ink tank lamp.
When the ink level is low:
The ink tank lamp flashes slowly (about three seconds). Prepare a new ink tank.
...Repeats
When ink has run out:
The ink tank lamp flashes fast (about one second). Replace it with a new ink tank.
...Repeats
If an error message is displayed on the LCD, an ink tank error has occurred and the machine cannot
continue to print. See “An Error Message is Displayed on the LCD” on page 115.
Knowing When to Replace Ink Tank
It is important to identify the empty tank using the LCD and replace it.
When Low Ink is Detected:
is displayed.
The message is displayed on the LCD when you start printing.
Obtain a new ink tank.
z To continue printing, select <Yes> and then press [OK].
z To cancel printing, select <No> and then press [OK].
When Ink has Run Out:
is displayed.
z Press [OK] to resume printing with an empty ink tank. When printing is finished, replace the ink
tank immediately. If you continue printing with an empty ink tank, it will be a cause of trouble.
* Printing does not resume if any of the ink tanks are left uninstalled. Be sure to press [OK] with
all the ink tanks installed.
z Press [Stop/Reset] to cancel printing. Replace with a new ink tank.
Chapter 11
Routine Maintenance
97
Replacing Ink Tanks
When an ink tank runs out of ink, replace it using the following steps.
z To maintain optimal print quality, use an ink tank within six months of its first
use.
z Once an ink tank has been used, do not remove it from the machine and
leave it out in the open. This will cause the ink tank to dry out and the
machine may not operate properly if it is reinstalled.
z Color ink consumption may occur even when black-and-white or grayscale
printing is specified.
Color ink is consumed in the head cleaning and deep cleaning, which are
necessary to maintain the machine’s capabilities.
Note
1
Open the Scanning Unit (Printer Cover) and the Paper Output Tray.
(1) Make sure the machine is turned on.
(2) Raise the Scanning Unit (Printer Cover) until it stops.
* The Paper Output Tray will open automatically after the Print Head Holder moves to the
center.
(A)
(A) Press the Open Button to open the Paper Output Tray if it does not open
automatically.
Caution
Important
98
Do not hold the LCD or the Operation Panel.
If the Scanning Unit (Printer Cover) is left open for more than 10 minutes,
the Print Head Holder moves to the right. Close and reopen the Scanning
Unit (Printer Cover) to return the Print Head Holder to the center.
Routine Maintenance
Chapter 11
2
Open the Inner Cover.
Caution
3
z Do not try to manually move or stop the Print Head Holder.
z Do not touch any metal parts.
Remove the ink tank whose lamp is flashing fast.
(1) Push the tab (A) and remove the ink tank.
(B)
(A)
Caution
Important
Note
4
Do not touch the Print Head Lock Lever (B). Remove only the ink tank.
z Handle ink tanks carefully to avoid staining clothing or the surrounding
area.
z Discard empty ink tanks according to the local laws and regulations
regarding disposal of consumables.
Be sure to replace ink tanks one by one when replacing more than one ink
tank.
Prepare a replacement tank.
(1) Remove the new ink tank from its packaging, then pull the orange tape (A) toward the
arrow so that the protective film does not remain on the air hole (C). Then remove the film
completely (B).
Chapter 11
Routine Maintenance
99
(2) Remove the orange protective cap (D) from the bottom of the ink tank and discard it.
Carefully hold the protective cap when removing it to prevent the ink from staining your
fingers.
Discard the cap once it is removed.
(D)
(A)
(B)
(C)
(E)
Important
5
(F) (G)
z Be sure to remove the clear film from the ink tank in the exact order
shown in step 5, as failure to follow this step may cause the ink to leak
and stain your clothes and hands.
z Do not touch the electrical contacts (G). Doing so can cause the
machine to malfunction or become unable to print.
z Do not squeeze the side of ink tanks (F) as this may cause the ink to
leak out and stain your clothes and hands.
z Do not re-attach the protective cap (D) once you have removed it.
z Do not touch the open ink port (E) once the protective cap is removed,
as this may prevent the ink from being ejected properly.
z Ink on the removed protective cap may stain your clothes and hands.
z Ensure that all the orange tape has been peeled off along the
perforation. If there remains a part of the orange tape, ink may not be
ejected correctly.
Install the ink tank.
(1) Install the ink tank into the Print Head.
Note
(2) Press on the
Refer to the guide label (A) and insert the ink tank in the correct position.
mark on the ink tank until the ink tank snaps firmly into place.
(3) Ensure that the ink tank clicks into place and then its lamp lights red (B).
(A)
(B)
100
Routine Maintenance
Chapter 11
Important
6
Close the Inner Cover.
Note
7
Make sure to install all the ink tanks to enable printing. The machine
cannot be used unless all the ink tanks are installed.
Ensure that the Inner Cover is closed. Printing will not occur if the Inner
Cover is open.
Slowly close the Scanning Unit (Printer Cover).
The Print Head Holder moves to the right.
Caution
Note
z Be sure to hold the Scanning Unit (Printer Cover) firmly using both
hands, and be careful not to get your fingers caught.
z Do not hold the LCD or the Operation Panel.
z If <Some ink tanks are not installed in place.> is displayed on the LCD
after the Scanning Unit (Printer Cover) is closed, some ink tanks may
be installed in the wrong positions. Open the Scanning Unit (Printer
Cover) and make sure that all the ink tanks are installed in the correct
order directed on the label.
z When you start printing after replacing the ink tank, the machine
executes Print Head cleaning automatically. Do not perform any other
operations until the Print Head cleaning finishes.
Keeping the Best Printing Results
z When unplugging the power cord
When unplugging the power cord, be sure to press [ON/OFF] first. When you press [ON/OFF],
the Print Head is protected by the cap to prevent the ink from drying. When unplugging the
power cord, be sure to unplug it after turning OFF the machine with [ON/OFF].
z When not using the machine for a long time
When not using the machine for a long time, print or copy in both black & white and in color, or
perform Print Head cleaning, about once a month to prevent degradation of the Print Head.
Numerous nozzles are installed in the Print Head for high-precision printing. Just as the
uncapped tip of a ballpoint pen or marker becomes dry and unusable if not used for a long period
of time, the Print Head nozzles become blocked by dried ink. Periodically printing or cleaning the
Print Head can prevent this blockage.
Note
Chapter 11
If the printed area is traced with a highlight pen or paint-stick or stained
with water or sweat, ink may blur depending on the paper.
Routine Maintenance
101
When Printing Becomes Faint or Colors are Incorrect
When printing becomes faint or colors are incorrect, even if ink remains in the ink tanks, the Print
Head nozzles are probably clogged. Follow the procedures below to clean the nozzles.
If the ruled lines are shifted after running the Print Head maintenance, align the Print Head.
Note
Before printing the nozzle check pattern or cleaning the Print Head, check the
following;
– Open the Scanning Unit (Printer Cover), and make sure that all the ink tanks
click into place and then their lamps light red.
– If any one of the lamps is flashing, the associated ink tank is empty or
running low. See “Getting the Ink Level Information” on page 97.
If an ink tank lamp is flashing even though ink remains in that ink tank, it is
inserted in the wrong position. Make sure that the correct ink tank color is
inserted in each position. Open the Scanning Unit (Printer Cover) and make
sure all the ink tank lamps are lit. See “Replacing an Ink Tank” on page 96.
– If the ink tank lamp is unlit, press the
mark on the ink tank firmly until it
clicks to fully insert it. Make sure that all packaging material is peeled off the
ink tank. See “Replacing Ink Tanks” on page 98.
Step 1
See “Printing the Nozzle Check Pattern” on page 103
If missing lines or white stripes appear
After Print Head
cleaning, print the
nozzle check
pattern.
Step 2
See “Print Head Cleaning” on page 106
If the problem remains after performing Print Head
cleaning twice
Step 3
See “Print Head Deep Cleaning” on page 107
Note
If Print Head Deep cleaning does not resolve the problem, contact the Canon
Customer Care Center.
z If the ruled lines are shifted
Step 1
See “Aligning Print Head automatically” on page 108
102
Routine Maintenance
Chapter 11
„ Performing Maintenance
1
Press [ON/OFF] to turn on the machine.
See “Turning the Machine ON and OFF” on page 17.
2
3
Press [Menu].
Display the Maintenance screen.
(1) Use [ ] or [ ] to select <Maintenance/settings>, then press [OK].
The Maintenance/settings screen is displayed.
(1)
(2) Use [ ] or [ ] to select <Maintenance>, then press [OK].
The Maintenance screen is displayed.
(2)
(3) Use [ ] or [ ] to select the setting item, then press [OK].
The setting screen for the selected item is displayed.
(3)
„ Printing the Nozzle Check Pattern
Print the nozzle check pattern to determine whether the ink ejects properly from the Print Head
nozzles and to verify Print Head alignment. Use this function when printed results are blurred or
the color is incorrect.
Note
1
Ensure that the Inner Cover is closed.
Press [ON/OFF] to turn on the machine, then load a sheet of A4 or Letter-sized
plain paper in the Auto Sheet Feeder or the Cassette.
See “Turning on the Machine” on page 17 and “Loading Paper” on page 19.
2
Use [Feed Switch] to select the paper source where you have loaded paper.
Chapter 11
Routine Maintenance
103
3
Printing the nozzle check pattern.
(1) Display the Maintenance screen.
See “Performing Maintenance” on page 103.
(2) Use [ ] or [ ] to select <Nozzle check> and then press [OK].
The pattern print confirmation screen is displayed.
(2)
(3) Use [ ] or [ ] to select <Yes> and then press [OK].
The nozzle check pattern is printed.
(3)
4
Examine the pattern and take the appropriate action.
See “Examining the Nozzle Check Pattern” on page 105.
104
Routine Maintenance
Chapter 11
„ Examining the Nozzle Check Pattern
Examine the nozzle check pattern. Perform cleaning if necessary.
Note
If the ink level is low, the nozzle check pattern is not printed correctly.
Replace the relevant ink tank. (See “Replacing an Ink Tank” on page 96.)
(1)
(2)
(1) Examine if any missing lines exist on this pattern.
(2) Examine if any white stripes exist on this pattern.
The two different pattern sets will be displayed by turns for the pattern confirmation screen on
the LCD.
z There are no white stripes./All the patterns are printed normally.
(1) Select <All A> and press [OK].
The screen returns to the Maintenance screen.
(1)
Chapter 11
Routine Maintenance
105
z When a white stripe exists on any of the printed patterns
(1) Select <Also B> and press [OK].
The cleaning confirmation screen is displayed.
(2) Select <Yes> and press [OK] to start Print Head cleaning.
See “Print Head Cleaning” on page 106.
(2)
„ Print Head Cleaning
Clean the Print Head if missing lines or white stripes appear in the nozzle check pattern. This
unclogs the nozzles to restore the Print Head condition. Note that cleaning the Print Head
causes waste ink to be absorbed in the waste ink absorber. Cleaning the Print Head consumes
ink, so perform Print Head cleaning only when necessary.
Note
1
Ensure that the Inner Cover is closed.
Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 17.
2
Clean the Print Head.
(1) Display the Maintenance screen.
See “Performing Maintenance” on page 103.
(2) Use [ ] or [ ] to select <Cleaning> and then press [OK].
The confirmation screen is displayed.
(2)
(3) Use [ ] or [ ] to select <Yes> and then press [OK].
The machine starts the Print Head cleaning.
(3)
Important
106
Do not perform any other operations until the Print Head cleaning
finishes. This takes about 50 seconds.
Routine Maintenance
Chapter 11
3
Check the status of the Print Head.
After Print Head cleaning finishes, the nozzle check confirmation screen is displayed. Print
the nozzle check pattern to verify that the Print Head nozzles are clean. See “Printing the
Nozzle Check Pattern” on page 103.
Note
If you perform cleaning and nozzle check twice and the result does not
improve, then perform Deep cleaning.
See “Print Head Deep Cleaning” on page 107.
„ Print Head Deep Cleaning
If print quality does not improve by standard Print Head cleaning, try Print Head deep cleaning,
which is a more powerful process. Print Head deep cleaning consumes more ink than standard
print head cleaning, so perform this procedure only when necessary.
Note
1
Ensure that the Inner Cover is closed.
Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 17.
2
Perform deep cleaning of the Print Head.
(1) Display the Maintenance screen.
See “Performing Maintenance” on page 103.
(2) Use [ ] or [ ] to select <Deep cleaning> and then press [OK].
The confirmation screen is displayed.
(2)
(3) Use [ ] or [ ] to select <Yes> and then press [OK].
The machine starts the Print Head deep cleaning.
(3)
Important
3
The process takes about 90 seconds to complete, so simply wait until the
Alarm Lamp stops flashing.
Check the status of the Print Head.
(1) Print the nozzle check pattern to verify that the Print Head nozzles are clean.
See “Printing the Nozzle Check Pattern” on page 103.
When one specific color only does not print, see “Replacing an Ink Tank” on page 96.
Chapter 11
Routine Maintenance
107
(2) If the problem remains, make sure that ink remains in the ink tank. Then turn off the
machine’s power for at least 24 hours, and perform deep cleaning of the Print Head
again.
(3) If the problem still remains, the Print Head may be damaged. Contact the Canon
Customer Care Center
„ Aligning Print Head automatically
If the ruled lines are shifted after running the Print Head maintenance, align the Print Head.
There are two ways to align the Print Head, automatic or manual. First, try adjusting the Print
Head automatically. If the automatic Print Head alignment does not work or if you wish, you can
adjust the Print Head manually. See “Adjusting the Print Head Manually” on page 117.
Note
1
z The Cassette does not feed paper for aligning the Print Head. Load
paper in the Auto Sheet Feeder.
z Ensure that the Inner Cover is closed.
Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 17.
2
Execute automatic Print Head alignment.
(1) Display the Maintenance screen.
See “Performing Maintenance” on page 103.
(2) Use [ ] or [ ] to select <Auto head align> and then press [OK].
The confirmation screen is displayed.
Note
Select <Head alignment print> to print the current adjustment values.
(2)
(3) Load two sheets of A4- or Letter-sized plain paper in the Auto Sheet Feeder.
(4) Use [ ] or [ ] to select <Yes> and then press [OK].
A pattern is printed and the Print Head is automatically aligned. It takes about five
minutes until printing completes.
(4)
108
Routine Maintenance
Chapter 11
z The pattern is printed in black and blue.
When Automatic Print Head Alignment Cannot Be Executed
Correctly
z When automatic Print Head alignment cannot be executed correctly,
the message “Auto head align has failed.” is displayed on the LCD.
See “An Error Message is Displayed on the LCD” on page 115.
Note
Cleaning Your Machine
This section describes the necessary cleaning procedures for your machine.
z Be sure to turn OFF the power and disconnect the power cord before
cleaning the machine.
z Do not use tissue paper, paper towels, or similar materials for cleaning. Paper
tissue powders or fine threads may remain inside the machine and cause
problems such as a blocked Print Head and poor printing results. Use a soft
cloth to avoid scratching the components.
z Never use volatile liquids such as thinners, benzene, acetone, or any other
chemical cleaner to clean the machine; these can damage the machine’s
components.
Caution
„ Cleaning the Platen Glass and Document Cover
Wipe the Platen Glass (A), the FAU Protective Sheet (white area) (B), and the FAU Lamp (C)
with a clean, soft, lint-free cloth moistened with water. Then wipe with a clean, soft, dry, lint-free
cloth making sure not to leave any residue, especially on the Platen Glass. If you have trouble
getting the scanning area clean, wipe with diluted mild detergent (for dish washing).
Important
The sheet (B) is easily damaged, so wipe it gently.
(B)
(C)
(A)
Chapter 11
Routine Maintenance
109
„ Cleaning the Roller (Roller Cleaning)
Clean the paper feed rollers if paper is not fed properly. Cleaning the paper feed rollers will wear
the rollers, so perform this only when necessary.
Note
1
Ensure that the Inner Cover is closed.
Press [ON/OFF] to turn on the machine, then remove any paper from the Auto
Sheet Feeder and Cassette.
See “Turning on the Machine” on page 17.
2
3
Use [Feed Switch] to select the paper source to clean.
Clean the paper feed rollers.
(1) Display the Maintenance screen.
See “Performing Maintenance” on page 103.
(2) Use [ ] or [ ] to select <Roller cleaning>, then press [OK].
The confirmation screen is displayed.
(2)
(3) Use [ ] or [ ] to select <Yes>, then press [OK].
The paper feed rollers are cleaned.
(3)
4
5
Repeat step 3 twice.
6
Repeat step 3 three times.
Load three or more of A4- or Letter-sized paper in the paper source you selected in
step 2.
The sheet of paper is automatically fed in and then out of the machine.
If there are no signs of improvement after performing three times, contact the Canon
Customer Care Center.
110
Routine Maintenance
Chapter 11
„ Cleaning the Interior of the Machine (Bottom Plate Cleaning)
This section describes how to clean the interior of the machine. If the interior of the machine
becomes dirty, paper printed onto by the machine may get dirty, so we recommend performing
cleaning regularly.
Note
1
Ensure that the Inner Cover is closed.
Press [ON/OFF] to turn on the machine, then remove any paper from the Auto
Sheet Feeder.
See “Turning on the Machine” on page 17.
2
Prepare a single sheet of A4- or Letter-sized plain paper. Fold it in half along the
long edge. Unfold the paper, then load it in the Auto Sheet Feeder with the open
side to the front.
3
Perform bottom plate cleaning.
(1) Display the Maintenance screen.
See “Performing Maintenance” on page 103.
(2) Use [ ] or [ ] to select <Bottom plate cleaning>, then press [OK].
The confirmation screen is displayed.
(2)
Chapter 11
Routine Maintenance
111
(3) Use [ ] or [ ] to select <Yes>, then press [OK].
The sheet of paper is automatically fed in and then out of the machine.
If the printed paper is smudged, clean the inside of the machine again.
If the problem remains after performing cleaning again, the protrusions inside the
machine may be stained. Clean them up. See “Cleaning the Protrusions inside the
Machine” on page 112.
(3)
Important
z Even if the Cassette is selected as the paper source, paper will be fed
from the Auto Sheet Feeder to print the pattern.
z Do not perform any other operation while the bottom plate is being
cleaned.
„ Cleaning the Protrusions inside the Machine
If protrusions inside the machine are stained, wipe ink off the protrusions using a swab or the
like.
112
Routine Maintenance
Chapter 11
Chapter 12
Troubleshooting
This section describes troubleshooting tips for problems you may encounter when using the
machine.
Note
This section describes about error messages that are displayed on the LCD or
troubleshooting tips for the problems of copy direct printing. If you cannot find
appropriate tips for your problem, refer to the on-screen manuals.
z “An Error Message is Displayed on the LCD” on page 115
z “Cannot See the Display Properly on the LCD/Cannot See the Display on the LCD” on page 117
z “Cannot Scan Films” on page 118
z “Cannot obtain a clean scan, colors scan incorrectly” on page 118
z “Frames are not detected correctly” on page 118
z “Ink Does Not Come Out/Printing is Blurred/Colors are Wrong/White Streaks/Straight Lines are
Misaligned/Cannot Print to End of Job” on page 119
z “When Copying” on page 122
z “Back of Paper is Smudged/Paper Does Not Feed Properly/Printed Surface is Scratched” on
page 123
z “Paper Curls/Ink Blots” on page 127
z “Paper Jams” on page 127
z “Cannot Print Properly from a Photo Index Sheet” on page 130
z “Cannot Print Properly from the Digital Camera” on page 130
z “Cannot Print Properly through Wireless Communication” on page 133
z “Cannot Install the MP Drivers” on page 134
z “Cannot Connect to the Computer Properly” on page 135
z “Printing Speed is Slow / USB 2.0 Hi-Speed Connection Does Not Work” on page 135
z “When You Connect to a Computer Running Windows XP, the Screen Shows the Warning
Message “This device can perform faster” or “High-SPEED USB Device Plugged into nonHigh-SPEED USB Hub”” on page 135
z “Problems Scanning” on page 136
z “Scanner won’t work” on page 136
z “ScanGear MP won’t start” on page 136
z “Cannot display preview” on page 137
z “Computer stops operating during scanning” on page 137
z “Scan quality is poor (Poor image displayed on the monitor)” on page 137
z “Parts of image missing or surrounded by extra white areas” on page 138
z “Trouble scanning with Multi-Scan or Multi-Crop function” on page 138
z “Slow scanning speed” on page 139
z ““There is not enough memory.” message is displayed” on page 139
z “Scanned image not displayed properly” on page 139
z “Trouble scanning with MP Navigator” on page 140
z “Image position and size incorrect when scanning from the machine’s operation panel” on
page 140
Chapter 12
Troubleshooting
113
z “Cannot Scan Films” on page 140
z “Thumbnail Display does not display correctly after previewing” on page 140
z “Cannot obtain a clean scan, colors scan incorrectly” on page 141
z “Image becomes too dark or too bright when cropping frame is moved, expanded or
contracted” on page 141
z “An Error Message Appears on the Screen” on page 141
z “Service Error 5100 is Displayed” on page 141
z “Writing Error/Output Error/Communication Error” on page 142
z “When an Error is Displayed Regarding Automatic Duplex Printing” on page 143
z “Error No.: 300 is Displayed” on page 143
z “Error No.: 1700 is Displayed” on page 144
z “Error No.: 1851 is Displayed” on page 144
z “Error No.: 1856 is Displayed” on page 144
z “Error No.: 2001 is Displayed” on page 144
z “Error No.: 2500 is Displayed” on page 145
z “For Windows Users” on page 145
If an error occurs when the machine is connected to a computer
When an error occurs in printing such as the printer is out of paper or paper jams, a troubleshooting
message is displayed automatically. Take the appropriate action described in the message.
The message may vary depending on the version of your Windows operating system.
114
Troubleshooting
Chapter 12
An Error Message is Displayed on the LCD
An error message is displayed on the LCD, take the corresponding countermeasure described
below.
Message
Action
There are no photos in memory
card.
z There are only invalid images on the memory card.
z Photo data edited/processed on the computer should be printed from
the computer, not from the camera.
Ink has run out. Replace the ink tank
and close the cover.
U041
The ink has run out (The lamp on the ink tank flashes).
Replace the ink tank, and close the Scanning Unit (Printer Cover).
If printing is in progress and you want to continue printing, press [OK]
with the ink tank installed. Then printing can continue under the ink out
condition. Replace the empty ink tank immediately after the printing. The
machine may be damaged if printing is continued under the ink out
condition.
Note
If multiple ink tank lamps are flashing red, check how fast they flash. Fast
flashing (at about one second interval) indicates the ink is empty. Slow
flashing (at about three second interval) indicates ink is low. For details on
different flashing speeds, see “Knowing When to Replace Ink Tank” on
page 97.
Print head is not installed./The type
of print head is incorrect.
Follow the directions given in the Easy Setup Instructions to install the
Print Head.
If the Print Head is already installed, remove the Print Head and reinstall it.
If this error still remains, the Print Head may be damaged. Contact the
Canon Customer Care Center.
Inner cover is open. Close the inner
cover and press [OK].
If the Inner Cover is open when starting normal printing, close it before
pressing [OK] on the machine.
Do not open or close the Inner Cover when printing. This may damage the
machine.
Some ink tanks are not installed in
place.
U072
More than one ink tank of the
following color is installed.
U071
Possible causes are as follows:
z Some ink tanks are not installed in place.
z More than one ink tanks of the same color are installed.
The lamp on the wrongly positioned ink tank flashes. Confirm that the ink
tanks are installed in the appropriate positions. See “Replacing an Ink
Tank” on page 96.
The waste ink absorber is almost
full.
Ink used for cleaning is absorbed in a waste ink absorber placed in the
machine.
Press [OK] to cancel the error so that you can continue printing. Once the
waste ink absorber becomes completely full, printing cannot be done until
the waste ink absorber is replaced.
Canon recommends to contact the Canon Customer Care Center as soon
as possible.You will need to replace a particular part of the machine.
The following ink tank cannot be
recognized.
U140
U043
Possible causes are as follows:
z The ink tank may not be installed properly (The lamp on the ink tank is
off). Install the appropriate ink tank.
z The ink tank may not be compatible with this machine (The lamp on the
ink tank is off). Install the appropriate ink tank. See “Replacing an Ink
Tank” on page 96.
Chapter 12
Troubleshooting
115
Message
Action
The following ink tank cannot be
recognized.
U150
z Ink tank errors have occurred (The lamp on the ink tank is off).
Replace the ink tank.
See “Replacing an Ink Tank” on page 96.
z The ink tank that is not supported by this machine is installed (The
lamp on the ink tank is off).
Install the appropriate ink tank.
See “Replacing an Ink Tank” on page 96.
The remaining level of the following
ink cannot be correctly detected.
U130
An ink tank that was once empty is installed.
Replace the ink tank.
Printing under the situation may damage the Print Head.
Canon shall not be liable for any machine malfunction or damage caused
by refilled ink tanks.
If you want to continue printing with the refilled ink tank installed, press
and hold [Stop/Reset] for at least 5 seconds, and then release it. Using
refilled ink tanks are memorized.
* This operation will release the function for detecting the remaining ink
level.
Incompatible device detected.
Disconnect the camera cable, and reconnect it.
Depending on the model or brand of your device, you may have to select a
print mode compliant with PictBridge before connecting the camera.
You may also have to turn on the camera or select Play mode manually
after connecting the camera to the machine. Perform necessary
operations according to the instruction manual supplied with your
camera.
If the error is still unresolved, there is a possibility that you are using a
digital camera or digital video camcorder that is not supported by this
machine. Use a digital camera or digital video camcorder compatible with
this machine.
Auto head align has failed.
z A4/Letter-sized paper is not loaded on the Auto Sheet Feeder.
Press [OK] on the machine to clear the error, then load one sheet of A4/
Letter-sized paper in the Auto Sheet Feeder.
Automatic Print Head alignment cannot be performed using paper from
the Cassette. For automatic Print Head alignment, always load paper in
the Auto Sheet Feeder.
z Print Head nozzles are clogged. Press [OK] to resolve the error. Print
the nozzle check pattern to check the status of the Print Head.
z The Paper Output Slot has been exposed to a strong light source
preventing current Print Head alignment. Press [OK] to resolve the
error. Align the Print Head so the Paper Output Slot will not be exposed
directly to a strong light source.
After carrying out the above measures, if the problem continues after
aligning the Print Head again, press [OK] to resolve the error, and then
perform manual Print Head alignment. For details on manual Print Head
alignment, see “Adjusting the Print Head Manually” on page 117.
****
Error code
An error requiring servicing might have occurred. Turn off the machine,
and unplug the power cord of the machine from the power supply. After a
while, plug the power cord of the machine back in, turn on the machine,
and then reconnect the camera to the machine. If the same error occurs,
contact the Canon Customer Care Center.
Scanner is not operating correctly.
Turn OFF the machine then remove the plug from the outlet. Wait a while,
and then try restoring the power. If this does not solve the problem,
contact the Canon Customer Care Center.
Release the scanner lock switch and
turn the power off and back on.
The Scanner Lock Switch is not released. Slide the Scanner Lock Switch
to the release position
, press [ON/OFF] to turn the machine off. Then,
turn the power back on.
If this error still remains, contact the Canon Customer Care Center.
116
Troubleshooting
Chapter 12
Note
Adjusting the Print Head Manually
If the Automatic Print Head Alignment does not work or if you wish to
adjust the print heads manually, follow the procedure below.
1. Press [ON/OFF] to turn on the machine, and then load two sheets
of A4/Letter-sized plain paper in the Auto Sheet Feeder or
Cassette. See “Turning the Machine ON and OFF” on page 17, and
“Loading Paper” on page 19.
2. Ensure that the proper paper source is selected.
3. Display the Maintenance screen.
4. Use [ ] or [ ] to select <Manual head align>, then press [OK].
5. Use [ ] or [ ] to select <Yes>, then press [OK].
The Print Head alignment pattern is printed.
6. When <Did the patterns print correctly?> is displayed, confirm that
the pattern is printed correctly, use [ ] or [ ] to select <Yes>, and
then press [OK].
The input screen for the head position adjustment value is
displayed.
7. Check the printed patterns and use [ ] or [ ] to input the number
of the pattern in column A that has the least noticeable streaks.
8. Press [ ] to move the cursor to column B, and then use [ ] or
[ ] to input the number of the pattern that has the least noticeable
streaks.
9. Repeat the procedure until you finish inputting the pattern number
for column M.
10.When you have finished inputting all pattern numbers, press [OK].
Cannot See the Display Properly on the LCD/Cannot
See the Display on the LCD
Cause
Cannot see the display on the LCD.
Chapter 12
Action
z The machine is not powered on.
The machine will power ON and the LCD will display a message when
you connect the power cord and press [ON/OFF].
z The LCD may be in the screen-saver mode.
On the Operation Panel, press a button other than [ON/OFF].
Troubleshooting
117
Cannot Scan Films
Cause
Action
Film guide not correctly placed on
the Platen Glass.
Insert the film in the film guide supplied for this machine and place it in
the correct position on the Platen Glass.
The Document Cover is not closed.
Close the Document Cover properly.
You have not removed the FAU
Protective Sheet.
Remove the FAU Protective Sheet from under the Document Cover.
The Scanner Lock Switch is not
released.
Slide the Scanner Lock Switch to the release position
to turn the machine off. Then, turn the power back on.
, press [ON/OFF]
„ Cannot obtain a clean scan, colors scan incorrectly
Cause
Action
Dust or dirt is stuck to the Platen
Glass or on the FAU Lamp.
Remove the dust or dirt from the Platen Glass or the FAU Lamp. See
“Cleaning Your Machine” on page 109.
Dirt is stuck to the film.
Wipe the film with a cloth then set it again.
Film condition is poor due to faded
colors.
Scan using <Fade restoration>. See “Memory card and Photo/film modes”
on page 36.
Note
If a print out of an image does not appear satisfactory or the same as what
you see on the monitor, you may need to change the print settings, or the
machine itself may have engaged in problems. See “Ink Does Not Come
Out/Printing is Blurred/Colors are Wrong/White Streaks/Straight Lines are
Misaligned/Cannot Print to End of Job” on page 119.
If the slide mounts are white then
light reflected off them will show up.
Use black mounts, or mask the slide mount with a black frame.
„ Frames are not detected correctly
Cause
Film is out of position.
Action
Reposition the film in the film guide so that the frame of the guide does
not obscure them.
Note
It may not be improved even if repositioning the film depending on the
film. In that case, scan from the computer. For details, refer to the Scan
Guide.
118
Troubleshooting
Chapter 12
Ink Does Not Come Out/Printing is Blurred/Colors are
Wrong/White Streaks/Straight Lines are Misaligned/
Cannot Print to End of Job
Cause
Ink tank is empty.
Action
If the ink tank lamp is flashing, ink is empty. Replace the ink tank, and
close the Scanning Unit (Printer Cover).
If printing is not finished yet, just press [OK] on the machine to continue
printing in the “no ink” state.
Replace the ink tank with a new one as soon as possible after printing has
finished. The machine may be damaged if printing is continued under the
ink out condition.
Note
If multiple ink tank lamps are flashing, check how fast they flash. Fast
flashing (about one second) indicates the ink is empty. Slow flashing
(about three seconds) indicates ink is low. For details on different flashing
speeds, see “Getting the Ink Level Information” on page 97.
Ink tank is not fully inserted.
When the ink tank lamp is unlit, press the
mark on the ink tank clicks
into place. The ink tank lamp lights red when the ink tank is fully inserted.
Make sure all of the orange tape is peeled off the ink tank as illustrated in
(A). If any orange parts are left like in (B), remove all of the orange parts.
(A)
(B)
(A) Correct
An L shaped notch appears on the ink tank.
(B) Incorrect
There remains the orange tape. Peel off the tape completely along the
perforation.
If ink tank is empty, replace the ink tank.
Incorrect media type
When printing directly from a digital camera, on the Operation Panel,
confirm that the <Media type> selected matches the paper loaded.
When printing from a computer, check the following.
On the [Main] tab of the printer driver, ensure that the [Media Type]
selected matches the paper loaded.
In the [Print] dialog box of the printer driver, select [Quality & Media] from
the pop-up menu, and then ensure that the [Media Type] selected matches
the paper loaded.
Chapter 12
Troubleshooting
119
Cause
Action
Print Head nozzles clogged or
shifted
Open the Scanning Unit (Printer Cover) and check if all ink tanks lamps
light red.
Print the nozzle check pattern to check for uneven ink output.
See “Printing the Nozzle Check Pattern” on page 103.
z Ink supply is uneven.
See “Print Head Cleaning” on page 106.
See “Print Head Deep Cleaning” on page 107.
z If straight lines are shifted.
See “Aligning Print Head automatically” on page 108.
Print quality is not set properly.
Be sure to set the [Print Quality] setting to [High] in Windows, or [Fine] in
Macintosh.
1. Open the printer properties dialog box.
2. On the [Main] tab, click [High] for the [Print Quality] setting.
When you cannot choose the [High] setting or when the print quality does
not improve, select [Custom], click [Set] and then adjust the Quality bar
for higher print quality.
1. Open the [Print] dialog box.
2. Select [Quality & Media] from the pop-up menu and then click [Detailed
Setting].
3. Drag the [Print Quality] slide bar to the [Fine] end.
The media is loaded with the wrong
side facing upwards.
Load the media with the correct side facing upwards.
The paper stack exceeds the
capacity of the Auto Sheet Feeder or
Cassette.
If the paper stack exceeds the paper limit mark, or exceeds the capacity of
the Auto Sheet Feeder or Cassette, reduce the amount of paper. See
“Recommended Paper and Requirements” on page 19.
There is some foreign matter in the
Auto Sheet Feeder or Cassette.
Check and remove any foreign matter.
The paper source is not configured
properly.
Make sure that the paper source in which the paper is loaded is correctly
configured. See “Changing the Paper Source” on page 23.
The Paper Output Tray is closed.
Press the Open Button to open the Paper Output Tray.
Inner Cover is open.
Close Inner Cover then press [OK] on the machine.
120
Troubleshooting
Chapter 12
Cause
Action
Unnecessary print jobs are queued./
Computer problems
Restart your computer. It may solve the problem.
Delete an undesired print job, if there is any. Use Canon IJ Status Monitor
in Windows or Printer Setup Utility (or Print Center) in Macintosh for the
deletion.
1. Open the printer properties dialog box.
2. Click the [Maintenance] tab and then [View Printer Status].
3. Click [Display Print Queue].
4. Select [Cancel All Documents] in the Printer menu.
Note
In Windows Me or Windows 98
Click to select an undesired document and select [Purge Print
Documents] in the [Printer] menu.
In Windows XP or Windows 2000
The print jobs may not be selected.
5. When the confirmation message is displayed, click [Yes].
The print job is deleted.
1. Select [Applications] from the [Go] menu.
2. Double-click the [Printer Setup Utility] icon in the [Utilities] folder.
When using Mac OS X v.10.2, double-click the Print Center icon.
3. Double-click the name of your machine displayed under [Name] in the
[Printer List].
4. Click to select an undesired document and click
.
The print job is deleted.
The machine has been printing
continuously over a long period.
If so, the Print Head will overheat. To protect the Print Head, printing will
stop temporarily and resume after a period of time. Interrupt printing when
appropriate, turn OFF the machine, and wait at least 15 minutes.
Caution
The area around the Print Head may become extremely hot. Do not under
any circumstances touch it.
You are printing high-resolution
documents such as photographs or
illustrations.
If you are printing high-resolution documents, processing the data will
take time, and printing will appear to have stopped depending on your
computer or environment. Wait until data is processed. If you are printing
a document with a large printing area (with small margins) or are printing
multiple sets, printing may stop to allow the ink time to dry.
Incorrect page size is selected.
Ensure that the page size setting matches the size of the paper loaded in
the machine:
z Check the Page Size setting from within your application to ensure that
it matches the size of the paper loaded.
z Check [Page Size] on the [Page Setup] tab in the printer properties
dialog box of the printer driver (Windows) or the [Page Setup] dialog
box of the printer driver (Macintosh) to ensure that it matches the size
of the paper loaded.
Chapter 12
Troubleshooting
121
Cause
Action
Check the size of the print data. For Windows XP and Windows 2000, if the
size of the data is too large, part of it may be lost. When the spool format is
The size of the print data is too large. EMF, follow the procedure below.
1. Open the printer properties dialog box.
2. On the [Page Setup] tab, click [Print Options].
3. Select the [Reduce spool data size] check box, and click [OK].
Note
When Reduce spool data size is set, the print quality may be degraded.
Performing automatic duplex
printing
Select [Use reduced printing] in the printer driver. It may solve the
problem.
1. Open the printer properties dialog box.
2. Click [Print Area Setup] in the [Page Setup] tab and select [Use reduced
printing].
1. In the [Print] dialog box, select [Duplex Printing & Margin] from the popup menu.
2. Select [Automatic Duplex Printing], and select [Use reduced printing] in
Print Area.
„ When Copying
Cause
Action
The document is not loaded
correctly.
Check that the document is loaded correctly on the Platen Glass.
See “Loading Documents” on page 18.
The quality (print quality) displayed
on the LCD is not suitable for the
document.
Set the image quality suitable for the document.
See “Copying” on page 38.
The document is not loaded with the
side to be copied face down.
When loading the document on the Platen Glass, the side to be copied
should be face down.
The document or photograph set on
the Platen Glass was printed from
your machine.
Image quality may be poor if you copy a printed document or photograph.
Instead, reprint the photograph directly from the digital camera, or the
document from your computer.
The Platen Glass or FAU Protective
Sheet is dirty.
Clean the Platen Glass or FAU Protective Sheet.
See “Cleaning the Platen Glass and Document Cover” on page 109.
122
Troubleshooting
Chapter 12
Back of Paper is Smudged/Paper Does Not Feed
Properly/Printed Surface is Scratched
Cause
Inside of the machine is dirty.
Action
If the inside of the machine is dirty, printed paper may be smudged.
Follow the steps described below to clean the inside of the machine.
1. Press [ON/OFF] to turn on the machine, then remove any paper from the
Auto Sheet Feeder and Cassette. See “Turning on the Machine” on
page 17.
2. Place the only one sheet of A4/Letter-size plain paper in landscape,
horizontally fold it in half.
3. Unfold the paper, and load the paper in the Auto Sheet Feeder with the
inverted-V edge down.
4. Use [
] or [ ] to select <Bottom plate cleaning> from the
<Maintenance> and press [OK].
5. Use [
] or [ ] to select <Yes> on the Bottom plate cleaning
confirmation screen and then press [OK].
The paper that is loaded in the machine will feed through the machine
and be ejected.
If protrusions inside the machine are stained, wipe ink off the
protrusions using a swab or the like.
Important
Before cleaning, be sure to turn off the machine.
Chapter 12
Troubleshooting
123
Cause
Action
Paper Feed Roller is dirty.
Follow the steps described below to clean the Paper Feed Rollers.
Cleaning the Paper Feed Rollers consumes them, so perform this
procedure only when necessary.
1. Press [ON/OFF] to turn on the machine, then remove any paper from the
Auto Sheet Feeder and Cassette. See “Turning on the Machine” on
page 17.
2. Use [Feed Switch] to select the paper source to clean.
3. Use [
] or [ ] to select <Roller cleaning> from the <Maintenance>
and press [OK].
4. Use [
] or [ ] to select <Yes> on the Roller cleaning confirmation
screen and then press [OK].
The Paper Feed Roller will rotate as it cleans.
5. Repeat steps 3 and through 4 two times.
6. Load three or more sheets of A4/Letter-sized plain paper lengthways in
the paper source you selected in step 2.
7. Repeat steps 3 and through 4 three times.
The paper that is loaded in the machine will feed through the machine
and be ejected.
If there are no signs of improvement after performing three times, contact
the Canon Customer Care Center.
Inappropriate media type is used.
z Check to see if the paper you are printing on is too thick or curled.
See “Media types you cannot use” on page 21.
z Note that smudging may occur at the top and bottom edges of the
paper when using Borderless Printing. Ensure that the paper you are
using is compatible with Borderless Printing. Refer to the Printer Driver
Guide.
124
Troubleshooting
Chapter 12
Cause
Thick paper is used.
Action
If you set the machine to prevent paper abrasion, the clearance between
the Print Head and the loaded paper is widened.
If the printing surface is abraded even with the media type set correctly to
match the loaded paper, set the machine to prevent paper abrasion.
When copying or printing directly, see “If printing surface abrasion is not
resolved even after taking the actions above:” on page 126.
When printing from a computer, follow the procedure below.
1. Open the printer properties dialog box.
2. Click the [Maintenance] tab and then [Custom Settings].
Important
In Windows XP or Windows 2000
When not logged on as a computer administrator or Administrators,
you cannot open the [Custom Settings] dialog box.
For further information on how to log on as an administrator, refer to
your Windows documentation.
3. Select the [Prevent paper abrasion] check box and click [Send].
4. Click [OK] when the confirmation message appears.
1. Open the [Canon IJ Printer Utility] dialog box.
2. Select [Custom Settings] from the pop-up menu.
3. Select [Prevent paper abrasion].
Note
Clear the [Prevent paper abrasion] check box once printing is complete.
When [Prevent paper abrasion] is selected in the printer properties dialog
box (Windows) or selected from [Custom Settings] in the Canon IJ Printer
Utility dialog box (Macintosh), the setting is also applied under direct
printing with the digital camera.
Paper is curled.
If all four corners or the printing surface of the paper is curled, the paper
may become dirty or the paper may not feed properly. Use the paper after
correcting paper curl as follows.
1. Face up the printing surface (A), and cover it with a non-printing regular
paper to avoid staining or scratching the surface.
2. Roll up the paper in a direction opposite to paper curl as the figure
below.
(A)
3. Check the printing paper if paper is corrected within approximately 2 to
5mm / 0.08 to 0.2 in (B).
(A)
(B)
It is recommended to print the curl-corrected paper one sheet at a time.
Chapter 12
Troubleshooting
125
Cause
Action
Inner Cover is not closed
completely.
Close the Inner Cover completely. Paper does not feed properly if the
Inner Cover is even slightly open.
The media type is not selected
correctly in the printer driver.
On the [Main] tab of the printer driver, ensure that the [Media Type]
selected matches the paper loaded. The print surface is smudged with
some printing jobs despite being set correctly. Should this occur, on the
[Maintenance] tab, click [Custom Settings] and place a check in [Prevent
paper abrasion].
In the [Print] dialog box of the printer driver, select [Quality & Media] from
the pop-up menu, and then ensure that the [Media Type] selected matches
the paper loaded. Additionally, the print surface may become smudged
with some printing jobs despite being set correctly. Should this occur,
click on [Custom Settings] from the Canon IJ Printer Utility pop-up menu
and place a check in [Prevent paper abrasion].
Paper is loaded incorrectly.
Load in the portrait orientation regardless of the print direction of the Auto
Sheet Feeder or Cassette.
Ensure that paper is loaded correctly. Slide the Paper Guides against the
paper stack.
The paper stack exceeds the
capacity of the Auto Sheet Feeder.
The paper cannot be fed normally depending on its media type or your
environment where the temperature and humidity are high or low. In that
case, reduce the amount of paper to half (approx. 0.2" / 5 mm in height).
Note
126
If printing surface abrasion is not resolved even after taking the
actions above:
Follow the procedure below to specify <Prevent paper abrasion> to
<ON>.
The procedure below can also be used when printing directly from a
digital camera.
1. Display the Device settings screen. See “Display the Device
settings screen.” on page 92.
2. Use [ ] or [ ] to select <Print settings>, then press [OK].
3. Use [ ] or [ ] to select <Prevent paper abrasion>, then press
[OK].
4. Use [ ] or [ ] to select <ON>, then press [OK].
*After finishing printing, use the same procedure to specify <Prevent
paper abrasion> back to <OFF>.
Troubleshooting
Chapter 12
„ Paper Curls/Ink Blots
Cause
Action
Paper being used is too thin.
Use Photo Paper Pro or other Canon specialty paper to print images that
have a high color saturation. See “Media types you cannot use” on
page 21.
The media type is not selected
correctly on the Operation Panel.
Ensure that the media type selected on the Operation Panel matches that
of the paper loaded.
Paper Jams
Cause
Action
Paper jams in the Paper Output Slot/
Auto Sheet Feeder.
Remove the paper according to the following procedure.
1. Slowly pull the paper out, either from the Auto Sheet Feeder or from the
Paper Output Slot, whichever is easier.
z If the paper tears and a piece remains inside the machine, open the
Scanning Unit (Printer Cover) and remove it. Be careful not to touch the
components inside the machine at this time.
After removing all paper, close the Scanning Unit (Printer Cover), turn
the machine off and turn it back on.
z If you cannot pull the paper out, turn the machine off and turn it back
on. The paper will be ejected automatically.
2. Reload the paper into the machine and press [OK].
z If you have turned off and on the machine in step 1, you will need to
retry printing, because this operation cancels any print jobs in
progress.
If you cannot remove the paper or the paper tears inside the machine, or if
the paper jam error continues after removing the paper, contact the Canon
Customer Care Center.
Chapter 12
Troubleshooting
127
Cause
Paper jams inside the machine
(Transport Unit).
Action
Remove the paper according to the following procedure.
1. Open the Rear Cover.
2. When you can see the jammed paper, slowly pull the paper out.
Be careful not to touch the components inside the machine.
If you cannot pull the paper out, turn the machine off and turn it back
on. The paper will be ejected automatically.
3. Close the Rear Cover.
4. If you could not extract the paper in step 2, remove the Cassette.
5. Slowly pull the jammed paper out.
6. If any paper is sticking out of the Cassette, reload the paper in the
Cassette.
7. Insert the Cassette into the machine again, and press [OK] on the
machine.
If you have turned off and on the machine in step 2, you will need to
retry printing, because this operation cancels any print jobs in
progress.
If you cannot remove the paper or if the paper tears inside the machine, or
if the paper jam error continues after removing the paper, contact the
Canon Customer Care Center.
128
Troubleshooting
Chapter 12
Cause
Paper jams inside the machine
(Duplex Transport Section).
Action
Remove the paper according to the following procedure.
1. Remove the Cassette.
If the paper is loaded in the Auto Sheet Feeder, remove the paper from
the Auto Sheet Feeder.
2. Stand the machine with the left side down.
Caution
Always stand the machine with the left side down when standing the
machine. Be careful that the right side is not down.
3. Slowly pull the jammed paper out while pulling the green cover toward
you.
Caution
Put back the machine immediately after removing the jammed paper.
4. If any paper is sticking out of the Cassette, reload the paper in the
Cassette.
Reload paper in the Auto Sheet Feeder, if necessary.
5. Insert the Cassette into the machine.
6. Press [OK] on the machine.
If you cannot remove the paper or if the paper tears inside the machine, or
if the paper jam error continues after removing the paper, contact the
Canon Customer Care Center.
Landscape Credit Card-sized paper
jams inside the machine.
Chapter 12
You cannot load Credit Card-sized paper in the landscape orientation.
Remove the paper according to the following procedure.
1. Load Credit Card-sized paper in the Auto Sheet Feeder one sheet at a
time.
Do not load it in the landscape orientation.
2. Press [ON/OFF] on the machine to turn off the power.
3. Press [ON/OFF] again on the machine to turn on the power.
The paper is fed and the jammed paper is ejected accordingly.
If you cannot remove the jammed paper or the error still persists, contact
the Canon Customer Care Center.
Troubleshooting
129
Cause
Landscape 4" x 6" / 101.6 x 152.4
mm media loaded in the Cassette
jams inside the machine.
Action
Load 4" x 6" / 101.6 x 152.4 mm media in the portrait orientation regardless
of the print direction.
Remove the paper according to the following procedure.
1. Press [ON/OFF] of the machine to turn off the power.
Open the Rear Cover.
2. Fold a piece of plain A4- or Letter-sized paper in four, push it in until it
hits the jammed paper, then pull out the paper folded in four.
3. Close the Rear Cover, then press [ON/OFF] of the machine to turn on the
power.
Wait until the jammed paper is automatically ejected.
If you cannot remove the jammed paper or the error still persists, contact
the Canon Customer Care Center.
Cannot Print Properly from a Photo Index Sheet
Cause
Action
<Failed to scan Photo Index Sheet.>
is displayed.
z Confirm the orientation and position of the Photo Index Sheet on the
Platen Glass. See “Printing by Using the Photo Index Sheet” on
page 57.
z Make sure that the Platen Glass or Photo Index Sheet is not dirty. See
“Printing by Using the Photo Index Sheet” on page 57.
z Make sure all required circles on the Photo Index Sheet are filled in. If
the filled circles on the sheet are not marked dark enough, the machine
may not read the settings.
Cannot Print Properly from the Digital Camera
The following are the possible errors that may occur when printing directly from a digital still camera
or digital video camcorder*, and the countermeasures to eliminate them.
* Hereafter, the digital still camera and digital video camcorder are collectively called a digital camera
or camera.
130
Troubleshooting
Chapter 12
Note
z PictBridge or Canon Bubble Jet Direct compatible digital cameras can be
connected to your machine for direct printing.
z This section describes errors that are indicated on Canon-brand PictBridgeor Bubble Jet Direct compatible cameras. The error messages and
operations may vary depending on the camera you are using. If you are using
a non-Canon PictBridge compatible camera and not sure how to clear the
printer error from the camera, confirm the message displayed on the LCD of
the machine and clear the error. For clearing an error from the machine, see
“An Error Message is Displayed on the LCD” on page 115.
z A communication time out occurs if printing takes a long time or if it takes too
much time to send data. This may stop printing. In such cases, disconnect
the cable between the machine and the camera, and reconnect the cable
between the machine and the camera. Then, turn the camera on, if it does
not automatically turn on. If the problem is still unresolved, select some other
photo and check if it can be printed or not.
z Some PictBridge compatible devices may need to be switched to printing
mode before connecting them to the machine. Also, it may need to be turned
on manually or switched to replay mode after connected to the machine.
Refer to the instruction manuals supplied with your PictBridge compatible
device and take the necessary steps before connection.
z The Print Head nozzles may be clogged if printing becomes faint or colors
are incorrect. See “When Printing Becomes Faint or Colors are Incorrect” on
page 102.
z If the paper is curled or its surface is scratched during printing, make sure
that you are using the correct type of paper. If this error occurs even when
you are using the correct type of paper, see “If printing surface abrasion is not
resolved even after taking the actions above:” on page 126.
z For the errors indicated on the camera and their solution, also refer to the
user’s manual of the camera. For other troubles with a digital camera, contact
the manufacturer of the camera.
Error Message On Camera
Action
Printer in use/Printer warming up
Photos are printed from the computer.
Wait until printing ends. When it is ready, the machine starts printing
automatically.
No paper/Paper Error
z Load paper in either the Auto Sheet Feeder or Cassette which you have
selected with [Feed Switch] on the machine, and select “Continue”*1 in
the display on your camera.
z The camera does not support the page size that is selected on this
machine. Check the print settings and select the page size that is
supported by the camera.
z Open the Paper Output Tray to resume printing. Close the Inner Cover if
it is open. Select “Stop” in the display on your camera to stop printing.
Paper jam
Select “Stop” in the display on your camera to stop printing.
Remove the jammed paper, load new paper, and press [OK] on the machine
and retry printing.
Printer cover open
Close the Scanning Unit (Printer Cover) on the machine.
No print head
The Print Head is defective or not installed.
Install a Print Head according to the Easy Setup Instructions.
If the Print Head has already been installed, remove the Print Head and
reinstall it.
If the error still remains, the Print Head may be defective. Contact the
Canon Customer Care Center.
Chapter 12
Troubleshooting
131
Error Message On Camera
Action
Waste tank (ink absorber) full
This error message indicates that the waste ink absorber is nearly full.
The machine has a built-in waste ink absorber to hold the ink used during
Print Head cleaning, for example. You can continue printing by selecting
“Continue”*1 on the display on your camera.
However, because printing is disabled once the waste ink absorber
becomes completely full and until the waste ink absorber is replaced, you
are recommended to contact the Canon Customer Care Center as early as
possible. You will need to replace a particular part of the machine.
Low ink level
Slow flashing (about three seconds in red) of an ink tank lamp indicates
that ink in this tank is low. Prepare a new ink tank.
Select “Continue”*1 in the display on your camera to resume printing.
No Ink
You can check the machine status according to the way the ink tank lamps
(red) flash.
Check the status of each lamp and take the appropriate action to clear the
error. See “Getting the Ink Level Information” on page 97.
When the ink tank lamp is off:
z The ink tank may not be installed properly. Install the appropriate ink
tank.
z The ink tank may not be compatible with this machine.
Install the appropriate ink tank. See “Replacing an Ink Tank” on page 96.
When the ink tank lamp flashes fast (about one second):
z The ink has run out.
Replace the ink tank, and close the Scanning Unit (Printer Cover).
If printing is in progress and you want to continue printing, select
“Continue”*1 in the display on your camera with the ink tank installed.
Then printing can continue under the ink out condition. Replace the
empty ink tank immediately after the printing. The machine may be
damaged if printing is continued under the ink out condition.
Note
If multiple ink tank lamps are flashing, check how fast they flash. Fast
flashing (about one second) indicates the ink is empty. Slow flashing (about
three seconds) indicates ink is low. For details on different flashing speeds,
see “Knowing When to Replace Ink Tank” on page 97.
z Some ink tanks are not installed in place, or more than one ink tanks of
the same color are installed.
Confirm that the ink tanks are installed in the appropriate positions. See
“Replacing an Ink Tank” on page 96.
Ink error/No ink
The ink tank that was once empty is installed. Replace the ink tank.
Printing under the situation may damage the Print Head. Canon shall not be
liable for any machine malfunction or damage caused by refilled ink tanks.
If you want to continue printing with the refilled ink tank installed, press and
hold [Stop/Reset] for at least 5 seconds, and then release it.
Using refilled ink tanks are memorized.
* This operation will release the function for detecting the remaining ink
level.
Hardware Error/No ink
Ink tank errors have occurred. Replace the ink tank.
See “Replacing an Ink Tank” on page 96.
132
Troubleshooting
Chapter 12
Error Message On Camera
Printer error
*1
Action
An error requiring servicing might have occurred.
Disconnect the cable between the machine and the camera, turn off the
machine, and unplug the power cord of the machine from the power supply.
After a while, plug the power cord of the machine back in, turn on the
machine, and then reconnect the camera to the machine. If the same error
occurs, contact the Canon Customer Care Center.
To resume printing, you can press [OK] on the machine instead of selecting Continue.
Cannot Print Properly through Wireless
Communication
The following are the causes of the trouble may occur when printing through infrared
communication.
For the trouble when printing through Bluetooth communication, refer to the Bluetooth User’s Guide.
Cause
Action
The installation place, distance,
and/or angle is improper.
When printing through infrared communication, confirm that the infrared
communication ports on both the machine and the mobile phone are placed
to face each other at the proper angle and distance, and that there is
nothing to block the communication between them, and then try printing
again. The proper distance and angle for communication vary depending
on the specifications of your mobile phone and on external environment.
Place the machine within 7.87" / 20 cm from the mobile phone for proper
communication.
During infrared communication,
infrared rays were interrupted or
another infrared communication
device is operating nearby.
If infrared communication between the infrared ports of the machine and
the mobile phone is interrupted by any obstacle for ten and several
seconds or longer during printing, the paper on which data is being printed
is ejected and the machine is reset. Remove the obstacle and retry printing.
If an infrared communication device is operating nearby, interference can
occur and fail in printing the document to the end. While printing a
document through infrared communication, do not operate another infrared
communication device, such as a remote controller of a TV, nearby.
The version of the infrared
communication port being used is
not compatible with IrDA.
The infrared communication function of the machine is only compatible
with mobile phones with IrDA compliant infrared communication ports.
Printing through infrared communication cannot be performed by any other
types of mobile phones.
Chapter 12
Troubleshooting
133
Cannot Install the MP Drivers
Cause
Action
Reinstall the MP Drivers.
Unable to proceed beyond the
Printer Connection screen
1. Click [Cancel] on the [Printer Connection] screen.
2. Click [Start Over] on the [Installation Failure] screen.
3. Click [Back] on the screen that appears next.
4. Click [Exit] on the [Welcome] screen, then remove the CD-ROM.
5. Turn the machine and the computer off.
6. Check the cable connection.
7. Restart the computer.
8. Make sure that no other applications (including anti-virus software) are
running in the background.
9. Carefully follow the procedures described in the Easy Setup
Instructions and reinstall the MP Drivers.
Installation does not start
automatically when the Setup CDROM is inserted into the drive.
Click [Start], select [My Computer] and then double-click the CD-ROM
icon.
For non-Windows XP users, open the [My Computer] window and then
double-click the CD-ROM icon.
Double-click the CD-ROM icon on your desktop to start installation.
If the CD-ROM icon is not displayed on the desktop, there is a problem
with the CD-ROM.
Contact the Canon Customer Care Center.
You have a defective Setup CD-ROM. If you have a defective Setup CD-ROM, please contact the Canon
Customer Care Center.
Make sure the CD-ROM is readable from Windows Explorer.
Reconfirm that the CD-ROM icon is displayed when you insert the CDROM.
Uninstall the old version of the software following the instructions in the
manual of that version, and reinstall the new version.
The computer has an old version of
the software installed. (Canon
MultiPASS is registered as a
program in the [Start] menu.)
134
Troubleshooting
Chapter 12
Cause
Installation procedure not followed
correctly
Action
Follow the Easy Setup Instructions packaged with your machine for
proper MP Drivers installation.
If the MP Drivers was not installed correctly, uninstall the MP Drivers, and
restart your computer. Try to reinstall the MP Drivers.
If the installer was forced to be terminated due to an error, restart your
computer.
Reinstall the MP Drivers.
Cannot Connect to the Computer Properly
„ Printing Speed is Slow / USB 2.0 Hi-Speed Connection Does Not Work
Cause
Your environment is not fully
compatible with USB 2.0 Hi-Speed.
Action
If your environment is not fully compatible with USB 2.0 Hi-Speed, the
printer will operate at a lower speed provided under USB 1.1. In this case,
the machine operates properly but printing speed may slow down due to
communication speed.
Check the following to ensure that your computer environment supports
USB 2.0 Hi-Speed connection.
z The USB port on your computer supports USB 2.0 Hi-Speed
connection.
z Both the USB cable and USB hub support USB 2.0 Hi-Speed
connection.
Be sure to use a certified USB 2.0 Hi-Speed cable. You are
recommended to use the cable no longer than 9.8 feet (3 meters).
z Your computer supports the USB 2.0 Hi-Speed connection.
Obtain the latest version of the USB 2.0 Hi-Speed driver and install it on
your computer.
z The USB 2.0 Hi-Speed driver operates properly.
Obtain the latest version of the USB 2.0 Hi-Speed driver and install it on
your computer.
Important
For how to confirm the points above, contact the manufacturer of your
computer, USB cable, or USB hub, as appropriate.
„ When You Connect to a Computer Running Windows XP, the Screen
Shows the Warning Message “This device can perform faster” or “HighSPEED USB Device Plugged into non-High-SPEED USB Hub”
Cause
You connect to a computer that does
not support USB 2.0 Hi-Speed.
Chapter 12
Action
Your environment is not fully compatible with USB 2.0.
See “Printing Speed is Slow / USB 2.0 Hi-Speed Connection Does Not
Work” on page 135.
Troubleshooting
135
Problems Scanning
„ Scanner won’t work
Cause
The machine is not recognized by
the computer.
Action
Restart the computer.
This may enable the computer to recognize the machine.
„ ScanGear MP won’t start
Cause
Action
Scanner driver (ScanGear MP) not
installed.
Set the Setup CD-ROM and install the software.
Scanner is not selected in the
application software.
In the application software, select this machine in [Select Source] or
[Import] under the [File] menu.
Example: ArcSoft PhotoStudio
*Display may differ depending on your operating system.
If you are using an older application software, the menu item may be
named [Select TWAIN-compliant device] instead of [Select Source].
The feature of the application
software does not support TWAIN.
136
Troubleshooting
Start ScanGear MP from within a TWAIN compatible software.
Chapter 12
Cause
An error message appears and the
ScanGear MP window fails to
appear.
Action
z Reattaching the USB cable. Be sure to use a certified USB 2.0 Hi-Speed
cable. You are recommended to use the cable no longer than 9.8 feet (3
meters).
z If a USB hub is used for the connection, do not use it. Attach the cable
to a USB port on the computer itself (not the hub).
z Attach the USB cable to a different USB port on the computer itself (not
a hub).
z Set the Setup CD-ROM and install the software.
z Select this machine in [Select Source] or [Import] in your application
software.
z Make sure that your application software supports TWAIN. You cannot
start ScanGear MP from within an applilcation software that does not
support TWAIN.
„ Cannot display preview
Cause
Action
An error message “Release the lock
switch” appears and the machine
fails to preview.
Close the application softwares, disconnect the USB interface cable from
the scanner and set the Scanner Lock Switch to the release position. Then
reconnect the USB interface cable to the computer. For details on
releasing the Scanner lock, refer to the Easy Setup Instructions.
„ Computer stops operating during scanning
Cause
Action
Output resolution set too high.
Reboot the computer, lower the output resolution and rescan.
The hard disk does not have enough
available space.
z Reset and reboot the computer, delete unnecessary files and
application software, and rescan.
z Open ScanGear MP from within the application software, click the
[Preferences] button in the Advanced Mode, and change the folder
listed in the [Select Folder Where Temporary Files are Saved] category
to one on a disk with sufficient free space.
Multiple devices connected to the
USB port.
Disconnect all other devices but the machine from the port.
„ Scan quality is poor (Poor image displayed on the monitor)
Cause
Action
The resolution is low.
If the image looks grainy, increase the scan resolution.
For details, refer to the Scan Guide.
Specification of the application
software.
Some application software does not display the image clearly if the image
is too small. Set the view mode to 100%.
Moiré appears.
Set [Descreen] to [ON] in the [Image Settings] section of the Advanced
Mode of ScanGear MP.
Note
Moiré may appear when you scan digital photo prints.
Chapter 12
Troubleshooting
137
Cause
Action
Inappropriate display settings.
Set your display settings on your computer to Medium (16 bit) or higher.
In the [Start] menu click [Control Panel], then [Appearance and Themes]
and then [Display], and on the [Settings] sheet, set [Color quality] to
[Medium (16 bit)] or [Highest (32 bit)] or a higher setting.
In the System Preferences dialog, click the [Displays] icon and select the
[Display] tab. Set the [Colors] list box to [Thousands] or a higher setting.
Dirty Platen Glass or FAU Protective
Sheet.
See “Cleaning Your Machine” on page 109 to clean them.
The status of the original is poor.
Scan with certain functions such as [Reduce Dust and Scratches], [Fading
Correction] or [Grain Correction] in the [Image Settings] section of the
Advanced Mode of ScanGear MP.
Note
If a print out of an image does not appear satisfactory or the same as what
you see on the monitor, you may need to change the machine’s settings,
or the machine itself may have engaged in problems.
„ Parts of image missing or surrounded by extra white areas
Cause
Action
Scan area was specified larger than
the original.
Specify the scan area appropriately.
If you click the Auto crop button of the ScanGear MP, the scan area is
adjusted automatically to match the size of the original. When scanning an
original surrounded by white borders such as a photo print, of if you
otherwise want to specify a custom scan area, specify the scan area
manually. Refer to the Scan Guide for details on manual scan area
specification.
„ Trouble scanning with Multi-Scan or Multi-Crop function
Cause
Action
The original is positioned outside
the supported area.
Check the position of the original on the Platen Glass. Observe the
following when using the Multi-Scan or Multi-crop function.
z There should be a gap of at least 0.4" / 10 mm between the edge of the
Platen Glass and originals.
z Leave at least 0.4" / 10 mm between the originals.
z A maximum of 10 originals can be scanned at once.
z If an original is slightly crooked on the Platen Glass-within 10 degrees
of true-the image is automatically straightened.
z The Multi-Scan function only works with rectangular originals such as
photos.
z Originals that are not rectangular (irregularly shaped, close-cropped
photos) cannot be detected correctly.
z Originals must be at least as large as approx. 1" /25 mm square.
Error arising from application
software specifications.
Some application software do not support multiple image scanning. Scan
each item individually without using the Multi-Scan or Multi-Crop function.
138
Troubleshooting
Chapter 12
„ Slow scanning speed
Cause
Action
Resolution is set higher than
necessary.
To view the image on a monitor, set the output resolution to 75 dpi. To
print, set the output resolution to a value such as 300 dpi.
Image correction features such as
dust and scratch reduction, fading
correction, and descreening are
enabled in ScanGear MP.
Set [Reduce Dust and Scratches], [Fading Correction], and [Descreen] to
[OFF] in the [Image Settings] section of the Advanced Mode of ScanGear
MP.
„ “There is not enough memory.” message is displayed
Cause
There is not enough memory to
continue scanning.
Action
Exit any application software that are running, and try to run this software
again.
„ Scanned image not displayed properly
Cause
Action
Scanned image prints out enlarged
(reduced).
Set the printing size in the application software.
Example: ArcSoft PhotoStudio
1. With the image in the selected state, click the [File] menu and select
[Print].
2. Move the print size slider left or right in the Print dialog to adjust the
printing size. The preview image to the left will change size accordingly.
Scanned image enlarged (reduced)
on the computer monitor.
z Change the display setting in the application software.
z Images opened in [Paint] or [Imaging] may be displayed in full size and
you may not be able to reduce its display size. Open the image in an
application software supplied with the scanner instead. Refer to the onscreen manual for each application software for the detailed
procedures.
z Change the resolution setting in the scanner driver and rescan. The
higher the resolution, the larger the resulting image will be.
z Some application software do not display clear images at small image
display settings. Set the scale to 100%.
Chapter 12
Troubleshooting
139
Cause
Scanned image won’t open.
Action
The file name extension is not supported by the application software.
Rescan the image using an application software, such as ArcSoft
PhotoStudio, and change the file name extension when saving the image.
Refer to the on-screen manual for each application software for the
detailed procedures.
„ Trouble scanning with MP Navigator
Cause
The original may not be scanned
correctly when [Document Size] is
set to [Auto Detect].
Action
Set the [Document Size] to the actual size of the original, and scan it
again. If the size you need cannot be set, scan to a larger size and trim it.
For more information, refer to the Scan Guide.
„ Image position and size incorrect when scanning from the machine’s
operation panel
Cause
MP Navigator settings do not match
the originals.
Action
Set the MP Navigator [Document Type] and [Document Size] to match
those of the originals being scanned. For more information, refer to the
Scan Guide.
Cannot Scan Films
Cause
Action
ScanGear MP and MP Navigator
settings are not set for scanning
film.
z When scanning in the Simple Mode in ScanGear MP, select [Negative
Film (Color)] or [Positive Film (Color)] in the [Select Source] category.
z When scanning in the Advanced Mode in ScanGear MP, select [Color
Negative Film], [Color Positive Film], [Monochrome Negative Film],
[Monochrome Positive Film] in the [Select Source] category.
z When scanning on the MP Navigator, scan using [Scan Film].
Resolution setting is too high and
scanning is slow.
If the Output Resolution is set to too high, scanning takes a long time or
the computer seems to be freezing. If this happens, lower the Output
Resolution and rescan.
„ Thumbnail Display does not display correctly after previewing
Cause
You are attempting to scan film with
extremely dark or bright contents./
The spaces between frames are
extremely narrow (0.08" / 2 mm is
standard).
140
Troubleshooting
Action
If thumbnails are not displayed properly after previewing with ScanGear
MP, scan in the Advanced Mode. For more information, refer to the Scan
Guide.
Chapter 12
„ Cannot obtain a clean scan, colors scan incorrectly
Cause
Film condition is poor due to faded
colors.
Action
In the ScanGear MP’s Advanced Mode/Image Settings, correct the image
using the [Fading Correction] and [Grain Correction] functions.
Note
If a print out of an image does not appear satisfactory or the same as what
you see on the monitor, you may need to change the print settings, or the
machine itself may have engaged in problems. See “Ink Does Not Come
Out/Printing is Blurred/Colors are Wrong/White Streaks/Straight Lines are
Misaligned/Cannot Print to End of Job” on page 119.
„ Image becomes too dark or too bright when cropping frame is moved,
expanded or contracted
Cause
Changing the size or position of the
cropping frame selects
inappropriate color data.
Action
Perform the following procedures in Advanced Mode in ScanGear MP.
1. Click [Preview] to rescan the preview image.
2. Confirm that the display mode is set to [Thumbnail Display].
If the display mode is set to Thumbnail Display Off, click [Thumbnail] to
change to Thumbnail Display On.
3. In the [Apply the tone value to all frames] section, click [Apply].
4. Adjust the cropping frame.
5. Click [Scan].
An Error Message Appears on the Screen
„ Service Error 5100 is Displayed
Cause
Movement of the Print Head Holder
is blocked.
Chapter 12
Action
Clear the paper jam or foreign object that is preventing the Print Head
Holder from moving, cancel printing from your computer, then turn off the
machine and turn it back on again.
Troubleshooting
141
„ Writing Error/Output Error/Communication Error
Cause
Action
Machine is not ready.
Ensure that the lamp on the Operation Panel lights.
If the lamp on the Operation Panel is off, turn the machine on.
While the Power Lamp is flashing green, the machine is initializing. Wait
until the Power Lamp stops flashing and stays lit. When the Alarm Lamp
lights orange, an error may occur in the machine. For details on how to
resolve the error, see “An Error Message is Displayed on the LCD” on
page 115.
Paper is not loaded.
Load paper and press [OK].
If paper is loaded, ensure that the paper source (the Auto Sheet Feeder or
Cassette) is selected correctly. If the paper source is not selected
correctly, use [Feed Switch] or the printer driver to change the paper
source.
If this error (Paper is not loaded) is ignored for a certain period of time, an
additional message may be displayed.
Printer port setting does not match
the interface connected to the
machine.
Check the printer port settings.
1. Click [Start] and select [Control Panel], [Printers and Other Hardware],
and then [Printers and Faxes].
For non-Windows XP, click [Start], select [Settings], and then [Printers].
2. Select the icon of your machine.
3. Open the [File] menu and select [Properties].
4. Click the [Ports] tab (or the [Details] tab) to confirm the port settings.
A USB port is selected if either [USBnnn (Canon MP950 Series Printer)]
or [MPUSBPRNnn (Canon MP950 Printer)] (where n is a number) is
indicated.
If the port setting is not correct, change the port setting according to
the interface you are using on the [Ports] tab (or the [Details] tab), or
reinstall the MP Drivers.
Machine is not properly connected.
Ensure that the printer cable is securely connected to the computer.
z If using a switching hub or other device, disconnect the machine and
reconnect it directly to the computer and try printing again. If
successful, the problem may have been with the device.
z There could also be a problem with the cable(s). Replace the cable(s)
and try printing again.
MP Drivers is not installed properly.
Uninstall then reinstall the MP Drivers.
1. Click [Start], and select [All Programs] (or [Programs]), the name of your
machine, and [Uninstall].
2. Follow the on-screen instructions to uninstall the driver.
3. Follow the procedures described in the Easy Setup Instructions and
reinstall the MP Drivers.
142
Troubleshooting
Chapter 12
„ When an Error is Displayed Regarding Automatic Duplex Printing
Cause
The correct media size is not
selected in the printer driver.
Action
Check the Page Size setting from within your application software to
ensure that it matches the size of the paper loaded.
Check [Page Size] on the [Page Setup] tab in the printer properties dialog
box (Windows) or the [Page Setup] dialog box (Macintosh) to ensure that it
matches the size of the paper loaded.
The page sizes that can be used for Automatic Duplex Printing are Letter,
A4, B5, A5, and 5" x 7" / 127.0 x 177.8 mm. Check that the page size of the
loaded paper is correct.
Note
To print on both sides of the page manually, follow the procedure below.
On the [Page Setup] tab, clear the [Automatic] check box. Then try printing
again.
The manual duplex printing function cannot be used.
„ Error No.: 300 is Displayed
Cause
Action
The machine is not ready.
Ensure that the lamp on the Operation Panel lights.
If the lamp on the Operation Panel is off, turn the machine on.
While the Power Lamp is flashing green, the machine is initializing. Wait
until the Power Lamp stops flashing and stays lit.
When the Alarm Lamp lights orange, an error may occur in the machine.
For details on how to resolve the error, see “An Error Message is
Displayed on the LCD” on page 115.
Machine is not properly connected.
Ensure that the printer cable is securely connected to the computer.
z If using a switching hub or other device, disconnect the machine and
reconnect it directly to the computer and try printing again. If
successful, the problem may have been with the device.
z There could also be a problem with the cable(s). Replace the cable(s)
and try printing again.
The name of the machine being used
is not selected in the [Printer] pulldown menu of the [Print] dialog box.
Select [MP950] from the [Printer] pop-up menu in the [Print] dialog box of
the printer driver.
If [MP950] is not displayed in the printer list, follow the procedure below to
confirm the settings.
1. Select [Edit Printer List...] from the [Printer] pop-up menu in the [Print]
dialog box. The printer list is displayed.
2. Check that [MP950] is displayed in the printer list.
If [MP950] is not displayed, install the MP Drivers again referring to the
Easy Setup Instructions for the operation.
Chapter 12
Troubleshooting
143
„ Error No.: 1700 is Displayed
Cause
The waste ink absorber is almost
full.
Action
Ink used for cleaning is absorbed in a waste ink absorber placed in the
machine.
Press [OK] to cancel the error so that you can continue printing. Once the
waste ink absorber becomes completely full, printing cannot be done until
the waste ink absorber is replaced.
Canon recommends to contact the Canon Customer Care Center as soon
as possible.
„ Error No.: 1851 is Displayed
Cause
Action
Close Inner Cover, then press [OK] on the machine.
Inner Cover is open when starting
regular printing.
„ Error No.: 1856 is Displayed
Cause
During regular printing, Inner Cover
is opened.
Action
Close Inner Cover, press [OK] on the machine, then try printing again.
One page of the print data being sent at the time of the error will be
erased, so print that page again.
„ Error No.: 2001 is Displayed
Cause
A specified period of time has
elapsed without receiving a
response from the digital camera./
The digital camera or digital video
camcorder connected is not
compatible with this machine.
144
Troubleshooting
Action
Disconnect the camera cable and reconnect it.
Depending on the model or brand of your device, you may have to select a
print mode compliant with PictBridge before connecting the device.
You may also have to turn on the device or select Play mode manually
after connecting the device to the machine. Unplug the connecting cable
and clear the error. Perform necessary operations for connection referring
to the instruction manual supplied with the PictBridge compliant device,
and then connect the cable again.
If the error is still unresolved, there is a possibility that you are using a
digital camera or digital video camcorder that is not supported by this
machine. Use a digital camera or digital video camcorder compatible with
this machine.
Chapter 12
„ Error No.: 2500 is Displayed
Cause
Auto head align has failed.
Action
See “Auto head align has failed.” on page 116 .
„ For Windows Users
Cause
The [Instructions] button is not
displayed on the printer driver
screen.
Action
The [Instructions] on the printer driver screen is not displayed if the onscreen manuals (instruction manuals) are not installed. Set the “Setup CDROM” in your computer and install the on-screen manuals (instruction
manuals).
Note
The [Instructions] is displayed only on [Main] and [Maintenance] tabs.
Scan Guide is not displayed.
The
button for displaying the scanner driver operating instruction is
grayed out when the on-screen manuals (instruction manuals) are not
installed. Set the “Setup CD-ROM” in your computer and install the onscreen manuals (instruction manuals).
If You Cannot Resolve the Problem
If you cannot resolve the problem with any of the workarounds in this chapter, please contact the
Canon Customer Care Center.
Canon support staff are trained to be able to provide technical support to satisfy customers.
Caution
Attempts by customers to repair or take apart the machine will invalidate any
warranty regardless of whether the warranty has expired.
Before contacting the Canon Customer Care Center, confirm the following:
z Product name: PIXMA MP950
z Serial number: written on label inside machine
z Details of the problem
z What you tried to solve the problem, and what happened
Note
Chapter 12
If the machine emits any unusual sound, smoke, or odor, turn it off immediately.
Unplug the power cord from the outlet and contact the Canon Customer Care
Center. Never attempt to repair or disassemble the machine yourself.
Troubleshooting
145
Chapter 13
Appendix
Printing Area
To ensure the best print quality, the machine allows a margin along each edge of media. The actual
printable area will be the area without these margins. By selecting Borderless Printing*, printing with
no margins is possible.
* This is available in A4, Letter, 4" x 6" /101.6 x 152.4 mm, 4" x 8" /101.6 x 203.2 mm, 5" x 7" / 127.0
x 177.8 mm, and 2.13" x 3.39" / 54.0 x 86.0 mm sizes of paper. If you are making borderless copies
in Copy mode or borderless prints in Photo/Film mode, you can adjust the amount of image that
extends off the paper by setting <Extended copy amount> under <Print settings>.
z In duplex printing, the printable area at the top of the page is 2 mm / 0.08
inches narrower than the usual area.
z If you print fully on the printable area outside of the recommended printing
area, print quality or paper feeding accuracy may go down.
Note
„ A5, A4, B5, 4" x 6", 4" x 8", 5" x 7", 2.13" x 3.39"
Size
Printable Area (width x height)
A5
141.2 x 202.0 mm / 5.6 x 7.9 inches
A4
203.2 x 289.0 mm / 8.0 x 11.4 inches
B5
175.2 x 249.0 mm / 6.9 x 9.8 inches
5" x 7" / 127.0 x 177.8 mm
120.2 x 169.8 mm / 4.7 x 6.7 inches
4" x 6" / 101.6 x 152.4 mm
94.8 x 144.4 mm / 3.7 x 5.7 inches
4" x 8" / 101.6 x 203.2 mm
94.8 x 195.2 mm / 3.7 x 7.8 inches
2.13" x 3.39" / 54.0 x 86.0 mm
47.2 x 78.0 mm / 1.86 x 3.07 inches
When Printing on Photo Paper Pro PR-101, Glossy Photo Paper GP-401,
Glossy Photo Paper “Everyday Use” GP-501, Photo Paper Plus Glossy
PP-101, Photo Paper Plus Double Sided PP-101D, Photo Paper Plus
Semi-gloss SG-101 and Matte Photo Paper MP-101, selection of
“Borderless Printing” enables you to make prints with no margins.
However, Borderless Printing may reduce the print quality on the top and
bottom edges of the paper or cause it to become smudged.
Note
3.0 mm/0.12 in
34.0 mm/1.36 in
5.0 mm/0.2 in
3.4 mm/0.13 in
Printable area
31.5 mm/1.2 in
3.4 mm/0.13 in
Recommended printing area
146
Appendix
Chapter 13
„ Letter, Legal
Size
Printable Area (width x height)
Letter
203.2 x 271.4 mm / 8.0 x 10.7 inches
Legal
203.2 x 347.6 mm / 8.0 x 13.7 inches
When Printing on Photo Paper Pro PR-101, Glossy Photo Paper GP-401,
Glossy Photo Paper “Everyday Use” GP-501, Photo Paper Plus Glossy
PP-101, Photo Paper Plus Double Sided PP-101D, Photo Paper Plus
Semi-gloss SG-101 and Matte Photo Paper MP-101, selection of
“Borderless Printing” enables you to make prints with no margins.
However, Borderless Printing may reduce the print quality on the top and
bottom edges of the paper or cause it to become smudged.
Note
3.0 mm/0.12 in
34.0 mm/1.36 in
31.5 mm/1.2 in
5.0 mm/0.2 in
6.4 mm/0.25 in
6.3 mm/0.24 in
Printable area
Recommended printing area
„ Envelopes
Size
Printable Area (width x height)
European DL
190.5 x 103.2 mm / 7.5 x 4.1 inches
US Com. #10
211.8 x 98.0 mm / 8.3 x 3.9 inches
3.0 mm/0.12 in
26.5 mm/1.04 in
3.4 mm/0.13 in
3.4 mm/0.13 in
Printable area
Printable area
Chapter 13
Appendix
147
How to Read the On-screen Manuals
The on-screen manuals are manuals to be viewed on your computer.
Read these manuals for detailed information on usage of the machine that is not mentioned in this
document, troubleshooting, or usage of the application softwares supplied with the Setup CD-ROM,
etc.
You can install the on-screen manuals using the Setup CD-ROM by either of the following.
z Select “Easy Install” to install the on-screen manuals along with the MP driver and application
softwares.
z Select “On-screen Manual” from “Custom Install” to install the on-screen manuals.
If you have not installed or have deleted the on-screen manuals, use either method above to install
them.
z Browser: Windows HTML Help Viewer
Note
z Microsoft Internet Explorer® 5.0 or later must be installed.
z The on-screen manual may not be displayed properly depending on
your operating system or Internet Explorer version. We recommend
that you keep your system up to date with Windows Update.
z Browser: Help Viewer
Note
The on-screen manual may not be displayed properly depending on your
operating system. We recommend that you keep your system up to date.
Uninstalling the On-screen Manuals
Follow the steps described below to uninstall all of the installed on-screen manuals from your
computer.
If the on-screen manuals have been installed, all of them will be deleted collectively.
1
Click [Start], and select [All Programs] (or [Programs]), [Canon MP950 Manual],
and then [Uninstall].
2
Click [OK] when the confirmation message appears.
When the message prompting you to restart your computer is displayed, click [OK] to restart
your computer.
z Deleting the Printer Driver Guide
The Printer Driver Guide is deleted when the printer driver is deleted.
z Deleting the User’s Guide and the Photo Application Guide
(1) Select [Applications] from the [Go] menu.
148
Appendix
Chapter 13
(2) Double-click the [Canon Utilities] folder, and then the [IJ Manual] folder.
(3) Drag the [MP950] folder into the trash.
(4) Drag the [MP950 On-screen Manual] on your desktop into the trash.
Transporting Machine
When relocating the machine or storing the machine for a long period of time, pack the machine
using the original packing materials. If you do not have the original packing materials, pack the
machine carefully using protective material and place inside a sturdy box.
Caution
Important
Note
Do not transport or store the machine on a slant, vertically or upsidedown, as the ink may leak from the machine and cause damage to it.
z Make sure to lock the Scanning Unit (Printer Cover) by sliding the
Scanner Lock Switch to the Lock position
.
z Pack the machine with the Print Head and ink tanks left installed.
Before shipping the machine by special delivery or post, clearly label the
box as “FRAGILE” or “HANDLE WITH CARE.”
Specifications
General Specifications
Printing resolution
9600 * x 2400 dpi. max.
* Ink droplets can be placed with a pitch of 1/9600 inch at minimum.
Print speed *
*Based on Canon standard
pattern.
Print speed may vary
depending on system
configuration, software,
document complexity, print
mode and page coverage.
Black printing (text pattern)
Max Speed (Custom Setting 5): 29 ppm
Standard: 15 ppm
Color printing
Max Speed (Custom Setting 5): 22 ppm
Standard: 9.8 ppm
Print width
203.2 mm max. (8.0 inches)
(for Borderless Printing: 216 mm / 8.5 inches)
Resident print control
mode
Canon extended mode
Receive buffer
42 KB
Interface
USB 2.0 Hi-Speed / Direct Print Port
* All operations are not guaranteed for computers standard-equipped with a
USB 2.0 Hi-Speed interface.
* Since the USB 2.0 Hi-Speed interface is fully upwardly compatible with USB
Full-Speed (USB 1.1), it can be used at USB Full-Speed (USB 1.1).
Direct Print Port
IrDA (Image data only)
Bluetooth (optional)
Acoustic noise level
Approx. 34.1 dB (A) (in the highest print quality mode)
Chapter 13
Appendix
149
General Specifications
Operating environment
Temperature: 5 to 35°C (41 to 95°F)
Humidity: 10 to 90%RH (no condensation)
Storage environment
Temperature: 0 to 40°C (32 to 104°F)
Humidity: 5 to 95% RH (no condensation)
Power supply
AC 110-120 V, 50/60 Hz
AC 200-240 V, 50/60 Hz
Power consumption
Printing (Copy): Approx. 22 W
Standby (minimum): Approx. 2 W
OFF: Approx. 0.8 W
Dimensions
(with the Paper Support
and Paper Output Tray
retracted)
468(W) x 415 (D) x 263 (H) mm
18.4 (W) x 16.3 (D) x 10.4 (H) inches
Weight
12.8 kg (28.2 lb.)
Print Head
Black (PGI-5BK): 512 nozzles
Cyan, Magenta, Yellow, Black (CLI-8BK), Photo Magenta, Photo Cyan: 512 x 6
nozzles
Copy speed
*Based on Canon standard
pattern.
Copy speed may vary
depending on document
complexity, copy mode,
page coverage and the
number of copies.
Black & white: <Fast> mode approx. 29 cpm
Color: <Fast> mode approx. 22 cpm
No. of copies
Maximum 99 copies
Intensity adjustment
9 levels
Zoom
25% to 400%
Copy Specifications
Camera Direct Print (Canon Bubble Jet Direct)
Compatible paper
Card #1 (Photo Paper Pro 4" x 6"/101.6 x 152.4 mm)
Card #2 (Photo Paper Plus Glossy, Photo Paper Plus Semi-gloss, Glossy
Photo Paper, or Glossy Photo Paper "Everyday Use" 4" x 6" / 101.6 x 152.4
mm)
Card #3 (Photo Paper Plus Glossy 5" x 7" / 127.0 x 177.8 mm)
LTR (Photo Paper Pro, Photo Paper Plus Glossy, Photo Paper Plus Semigloss, or Glossy Photo Paper Letter size)
A4 (Photo Paper Pro, Photo Paper Plus Glossy, Photo Paper Plus Semi-gloss,
Glossy Photo Paper, or Glossy Photo Paper "Everyday Use" A4 size)
Layout print
Standard: Borderless / with border, Index Print: 6-80 images (depending on the
size of print media)
150
Appendix
Chapter 13
Camera Direct Print (Canon Bubble Jet Direct)
Effect
ExifPrint
DPOF functions
Ver. 1.00 compatible (Index print, number of copies, select images, print
special characters (date))
Camera Direct Print (PictBridge)
Page size
Default (Selections based on the machine setting)
10 x 15 cm/4" x 6" (Photo Paper Plus Glossy, Photo Paper Pro, Photo Paper
Plus Semi-gloss, Glossy Photo Paper, Glossy Photo Paper "Everyday Use",
Photo Stickers*1)
13 x 18 cm/5" x 7" (Photo Paper Plus Glossy)*2
A4/8.5" x 11" (Photo Paper Plus Glossy A4/Letter, Photo Paper Pro A4/Letter,
Photo Paper Plus Semi-gloss A4/Letter, Glossy Photo Paper A4/Letter, Glossy
Photo Paper "Everyday Use" A4, Plain Paper A4/Letter)
5.4 x 8.6 cm/Credit Card (Glossy Photo Paper Card Size)
*1
Canon-brand sticker. Printing on this paper is available only when the
Layout function on your camera has a 16-up option.
See “Recommended Paper and Requirements” on page 19.
*2
If using a Canon PictBridge-compatible camera, you can select it.
Media type
Default (Selections based on the machine setting), Photo (Photo Paper Plus
Glossy, Glossy Photo Paper), Fast Photo (Photo Paper Pro), Plain Paper (Only
A4/Letter)
Layout
Default (Selections based on the machine setting), Borderless, Bordered, N-up
(2, 4, 9, 16*1), 35-up*2
*1 Layout compatible with Canon-brand sticker above. See “Recommended
Paper and Requirements” on page 19.
*2 Selected photos are printed in 35 mm film style layout (contact printing
layout).
This print setting is only available with certain Canon PictBridge-compliant
devices.
You can print shooting Info (Exif Data) on photos in list format, or in the
margins of specified photos.
Select Layout, then select the item displayed with the [i] icon.
(Note that this print setting cannot be used for some models.)
See “Recommended Paper and Requirements” on page 19.
Trimming
Default (Off: No trimming), On (follow camera’s setting), Off
Image optimize
Default (Selections based on the machine setting), On, Off, “VIVID”*, “NR”
(Noise Reduction)*, “VIVID+NR”*, “Face”*
* If using a Canon PictBridge-compatible camera, you can select it.
Print date & file no.
Default (Off: No printing), Date, File No., Both, Off
Chapter 13
Appendix
151
Scan Specifications
Compatibility
TWAIN / WIA (Windows XP)
Maximum document size
A4/Letter, 8.5" x 11.7" / 216 x 297 mm
Scanning resolution
Optical resolution 3200 dpi x 6400 dpi
Interpolated resolution 19200 dpi x 19200 dpi
Scanning image
processing
Halftones: 256 levels of gray
Color: 16,777,216 colors
Systems Requirements
z Windows XP / Windows 2000 / Windows Millennium
Edition / Windows 98*1: Pentium®, Celeron® 300
MHz*2 / 128 MB RAM (256 MB recommended)
*1 ScanSoft OmniPage SE (OCR software) does not
support Windows 98 first edition.
ScanSoft OmniPage SE may not be supplied with
this machine in some country.
*2 566 MHz or higher processor is required for USB
2.0 Hi-Speed performance.
z Microsoft Internet Explorer 5.0 or later
z USB 2.0 Hi-Speed interface
USB 2.0 Hi-Speed*3 operation can only be
guaranteed under the environments below.
OS: Windows XP (SP1 or later)/Windows 2000 (SP4
or later)
USB 2.0 Hi-Speed driver: USB 2.0 driver for
Windows*4
USB 2.0 Hi-Speed interface: a computer and a USB
cable that comply with USB 2.0 Hi-Speed standard*5
*3
Since the USB 2.0 Hi-Speed interface is fully
upwardly compatible with USB Full-Speed (USB 1.1),
it can be used at USB Full-Speed (USB 1.1).
*4
Microsoft’s authorized drivers are available
through Windows Update or Service Pack
installation. Any non-Microsoft USB 2.0 drivers are
not guaranteed.
*5
All operations are not guaranteed for computers
standard-equipped with a USB 2.0 Hi-Speed
interface.
z USB interface
USB 2.0 Hi-Speed performance requires Windows
XP Service Pack 1, Windows 2000 Service Pack 4 or
later with pre-installed USB 2.0 port.
z The CD-ROM drive, or the CD-ROM drive that is
shared online.
z Available hard-disk space
Windows XP/Windows 2000/Windows Me/Windows
98: 650 MB
z Canon IJ Status Monitor cannot be used under the
following conditions:
– When sharing this machine on a network (Windows
Me, Windows 98)
152
Appendix
z Mac OS X v.10.2.4 or later: 128 MB RAM
z USB 2.0 Hi-Speed interface
USB 2.0 Hi-Speed*6 operation can only be
guaranteed under the environments below.
OS: Mac OS X v.10.2.7 or later
An internal USB 2.0 Hi-Speed port and a USB cable
that comply with the USB 2.0 Hi-Speed standard
(USB 2.0 Hi-Speed operation on the expansion board
is not guaranteed.)
*6
Since the USB 2.0 Hi-Speed interface is fully
upwardly compatible with USB Full-Speed (USB 1.1),
it can be used at USB Full-Speed (USB 1.1).
z USB interface
z USB 2.0 Hi-Speed performance requires Mac OS X
version 10.2.7 or later with pre-installed USB 2.0
port.
z CD-ROM drive
z Available hard-disk space
Mac OS X v.10.2.4 or later: Approx. 550 MB
z The following functions are not supported:
– Manual Duplex Printing
– Photo Optimizer PRO
– Poster Printing
– Fit-to-Page Printing
– Booklet Printing
– Reverse Order Printing (supported with Mac OS X
v.10.3.x)
Chapter 13
Additional Systems Requirements for On-screen Manuals
z Browser: Windows HTML Help Viewer
* Microsoft Internet Explorer 5.0 or later must be
installed.
The on-screen manual may not be displayed
properly depending on your operating system or
Internet Explorer version. We recommend that you
keep your system up to date with Windows Update.
Chapter 13
z Browser: Help Viewer
* The on-screen manual may not be displayed
properly depending on your operating system. We
recommend that you keep your system up to date.
Appendix
153
Users in the U.S.A.
FCC Notice
PIXMA MP950: K10266
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of
Part 15 of the FCC Rules.
Note
Warning
Do not make any changes or modifications to the equipment unless otherwise
specified in this guide. If such changes or modifications should be made, you
could be required to stop operation of the equipment.
Mercury Legislation
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR
DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
TEL No. (516) 328-5600
154
Appendix
Chapter 13
Canon U.S.A., Inc. Limited Warranty - U.S. Only
The limited warranty set forth below is given by Canon U.S.A., Inc. (“Canon USA”) with respect to
the new or refurbished Canon-brand product (“Product”) packaged with this limited warranty, when
purchased and used in the United States only.
The Product is warranted against defects in materials and workmanship under normal use and
service (a) for a period of one (1) year from the date of original purchase when delivered to you in
new condition in its original container or (b) for 90 days from the date of original purchase for
refurbished Products. Defective parts or a defective Product returned to a Canon USA repair facility
or a Canon USA Authorized Service Facility (“ASF”), and proven to be defective upon inspection, will
be repaired, exchanged for new or comparable rebuilt parts, or exchanged for a refurbished Product,
as determined by the Canon USA repair facility or the ASF. Warranty repair or replacement shall not
extend the original warranty period of the Product. A dated proof of purchase is required at the time
of warranty service. A copy of your dated bill of sale will satisfy this requirement. This warranty does
not cover any accessories, or any consumables, such as paper or ink cartridges, as to which there
shall be no warranty or replacement.
This limited warranty shall only apply if the Product is used in conjunction with compatible
computers, peripheral equipment and software. Canon USA shall have no responsibility for such
items except for compatible Canon brand peripheral equipment covered by a separate warranty
(“Separate Warranty”). Repairs of such Canon brand peripheral equipment shall be governed by the
terms of the Separate Warranty. Non-Canon brand equipment and software that may be distributed
with the Product are sold “as is” and without warranty of any kind by Canon USA, including any
implied warranty regarding merchantability or fitness for a particular purpose, and all such warranties
are disclaimed. The sole warranty, if any, with respect to such non-Canon brand items is given by the
manufacturer or producer thereof.
This limited warranty covers all defects encountered in normal use of the Product and does not apply
in the following cases:
(a) Loss of or damage to the Product due to abuse, neglect, mishandling, improper packaging by
you, alteration, accident, electrical current fluctuations, improper use, failure to follow operating or
maintenance instructions in, or environmental conditions prescribed in, Canon USA's user's manual
or other documentation, or services performed by someone other than a Canon USA repair facility or
ASF. Without limiting the foregoing, dropping the Product, scratches, and abrasions will be
presumed to have resulted from misuse, abuse or failure to operate the Product as set forth in the
user's manual or other documentation for the Product.
(b) Use of parts or supplies (other than those sold by Canon USA) that cause damage to the Product
or cause abnormally frequent service calls or service problems.
(c) If the Product has had its serial number or dating defaced, altered or removed.
ANY SYSTEM SOFTWARE (WHETHER FACTORY LOADED ON THE PRODUCT OR
CONTAINED ON THE SOFTWARE DISKETTES OR CD-ROMS ENCLOSED WITH, OR
ACCOMPANYING, THE PRODUCT), AND ANY UTILITY SOFTWARE, DISTRIBUTED WITH OR
FOR THE PRODUCT, IS SOLD “AS IS” AND WITHOUT WARRANTY BY CANON USA. THE SOLE
WARRANTY WITH RESPECT TO SUCH SOFTWARE IS CONTAINED IN THE SOFTWARE
MANUFACTURER'S LICENSE AGREEMENT DISTRIBUTED THEREWITH, INCLUDING ANY
LIMITATIONS AND DISCLAIMERS THEREON. PLEASE CONTACT CANON USA IMMEDIATELY
IF YOU HAVE NOT RECEIVED A COPY OF THE SOFTWARE MANUFACTURER'S LICENSE
AGREEMENT.
NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, APPLIES TO THE PRODUCT AFTER THE
APPLICABLE PERIOD OF THE EXPRESS LIMITED WARRANTY STATED ABOVE, AND NO
OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY
ANY PERSON OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BIND CANON USA, OR
Chapter 13
Appendix
155
ITS ASF. (SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.) CANON USA
SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, INCONVENIENCE, EXPENSE
FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION
OF DATA, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED
BY THE USE, MISUSE, OR INABILITY TO USE THE PRODUCT REGARDLESS OF THE LEGAL
THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA OR ITS ASF HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND
AGAINST CANON USA OR ITS ASF BE GREATER IN AMOUNT THAN THE PURCHASE PRICE
OF THE PRODUCT CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING,
YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR
PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE POSSESSION,
USE, MISUSE, OR INABILITY TO USE THE PRODUCT SOLD BY CANON USA NOT CAUSED
SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON USA, OR ITS ASF. (SOME STATES
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.) THIS
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL
PURCHASER OF THE PRODUCT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A
GIFT, AND STATES YOUR EXCLUSIVE REMEDY.
Canon USA offers a range of customer technical support* options:
z Interactive troubleshooting, e-mail technical support, the latest driver downloads and answers to
frequently asked questions (www.canontechsupport.com)
z Toll-free live technical support Monday-Saturday (excluding holidays) at 1-800-828-4040
z Telephone Device for the Deaf (TDD-1-866-251-3752)
z Repair or Exchange Service Options:
In the event service is required for the Product during the limited warranty period, Canon USA offers
two hardware support options:
Authorized Service Facility Carry-In / Mail-In Service
Canon USA's Carry-In/Mail-In Service provides repair or exchange, at Canon USA's option, through
Canon USA's Authorized Service Facility (ASF) network. The name and telephone number of the
ASF(s) near you may be obtained from Canon USA's Web site at: www.canontechsupport.com or by
calling the Canon USA Customer Care Center at 1-800-828-4040, or any time while speaking to a
technical support person. A Product covered by this limited warranty will be repaired or exchanged,
as determined by Canon USA, and returned without charge by the ASF.
InstantExchange Service **
A Canon Customer Care Center or ASF technician will attempt to diagnose the nature of the problem
and, if possible, correct it over the telephone. If the problem cannot be corrected over the telephone,
and you elect the InstantExchange option, a reference number will be issued to you. You will be
asked for the Product serial number and other information pertaining to your defective Product and
for a ship-to location for the replacement Product (must include street address).
The Canon USA repair facility will ship out the replacement Product, via 2nd day Air freight service,
prepaid by Canon USA. After receipt of the replacement Product (with instructions and a prepaid
waybill), follow the enclosed instructions on how to ship the defective Product to the Canon USA
repair facility. The defective Product must be returned in the shipping carton in which the
replacement Product was packed and include the reference number, A COPY OF YOUR DATED
PROOF OF PURCHASE (BILL OF SALE), and a complete explanation of the problem. DO NOT
INCLUDE ANY OTHER ITEMS WITH THE DEFECTIVE PRODUCT IN THE RETURN SHIPPING
CARTON, AND BE SURE TO RETAIN YOUR PRINTHEAD AND INK CARTRIDGE(S) AND
TANK(S).
InstantExchange Service expedites, usually by the second business day, the exchange of a
defective Product with a replacement Product, which will normally be shipped the same day if your
request for this service is by 3 p.m. E.T. Monday through Friday, except holidays (three (3) business
156
Appendix
Chapter 13
day InstantExchange Service for Alaska and Hawaii). Canon USA does not guarantee expedited
shipping service in the event of the occurrence of factors beyond its reasonable control. The
replacement Product you receive may be a refurbished or reconditioned unit and will be covered for
the balance of the period remaining on your original limited warranty. NOTE THAT BY USING THIS
SERVICE YOU WILL KEEP THE REPLACEMENT PRODUCT THAT IS SENT TO YOU. CANON
USA WILL RETAIN THE DEFECTIVE PRODUCT THAT YOU ORIGINALLY PURCHASED, WHICH
SHALL BECOME THE PROPERTY OF CANON USA. InstantExchange warranty program service is
available only during the express limited-warranty period for your Product and only in the continental
United States, Alaska and Hawaii during such period.
This limited warranty gives you specific legal rights, and you may also have other rights, which vary
from state to state.
* Support program specifics are subject to change without notice.
** InstantExchange warranty service is subject to the availability of refurbished or new replacement
units.
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042
USA
©2005 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and
may also be a registered trademark in other countries.
Chapter 13
Appendix
157
Users in Canada
Caution
z This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
z Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
Customer Technical Supports
Canon Canada Inc., offers a full range of customer technical support* options:
z For interactive troubleshooting, e-mail technical support, the latest driver downloads and answers
to frequently asked questions (www.canon.ca)
z Automated interactive telephone support on most current products 24 hours, 7 days a week (1800-OK-CANON)
z Free live technical support Mon - Fri 9am-8pm EST (excluding holidays) for products still under
warranty (1-800-OK-CANON)
z The location of the authorized service facility nearest you (1-800-OK-CANON) If the problem
cannot be corrected by using one of the above technical support options, repair options are
available at the time of your call to the Free live technical support number above or via the website
at www.canon.ca
* Support program specifics are subject to change without notice.
CANON CANADA INC.
1-800-OK-CANON (1-800-652-2666)
24 HOURS A DAY, SEVEN DAYS A WEEK
http://www.canon.ca
158
Appendix
Chapter 13
Index
Numerics
button 16
A
Access Lamp 14
Alarm Lamp 15
Appendix 146
Auto Sheet Feeder 12
Auto Sheet Feeder Lamp 15
B
Back button 16
Before Printing 12
Black button 16
C
Card Slot 14
Card Slot Cover 12
Cassette 13
Cassette Lamp 15
Changing the Machine Settings 92
bluetooth settings 94
date display 95
language selection 95
load settings 95
power save setting 95
print settings 93
read/write attribute 95
reset setting 95
save settings 95
slide show setting 95
wireless print settings 94
Changing the Print Settings 34
copy mode 35
memory card and photo/film modes 36
Cleaning
interior 111
platen glass and document cover 109
roller 110
CLI-8BK Black 96
CLI-8C Cyan 96
CLI-8M Magenta 96
CLI-8PC Photo Cyan 96
CLI-8PM Photo Magenta 96
CLI-8Y Yellow 96
Color button 16
Components 12
COPY button 16
Copying 38
2-on-1 copy 42
4-on-1 copy 42, 43
auto intensity 40
borderless copy 43
fit-to-page 39
image repeat 44
Intensity 38
preset ratio 39
reducing or enlarging 39
two-sided copy 41
zoom 39
Cover Guide 12
D
Device settings 91
Direct Print Port 13
Document Cover 12
Duplexing Transport Unit 14
F
FAU (Film Adapter Unit) Protective Sheet 13
FAU Lamp 13
Feed Switch button 15
I
Ink Tank Lamp 14
Inner Cover 14
IrDA Port 12
L
LCD (Liquid Crystal Display) 12
Loading Documents 18
Loading Paper
auto sheet feeder 24
cassette 28
recommended paper and requirements 19
M
Maintenance
cleaning your machine 109
Memory Card 16
inserting 46
removing 48
supported by this machine 45
MEMORY CARD button 16
Menu button 16
N
Nozzle Check Pattern
examining 105
printing 103
O
OK button 16
ON/OFF button 15
Open button 13
Operation Panel 12, 15
P
Paper Guide 12
Paper Output Tray 13
Index
159
Paper Support 12
Performing Bluetooth Communication 81
Performing Infrared Communication 79
PGI-5BK Black 96
Photo Index Sheet button 16
Photo Printing from Photo or Film 61
multi-photo print 68
print all photos 70
scanning a film 62
scanning a photo 61
single-photo print 67
sticker print 69
trimming 69
PHOTO/FILM button 16
Platen Glass 13
Power Connector 15
Power Lamp 16
Power save setting 95
Print Head
adjusting the print head manually 117
aligning print head automatically 108
cleaning 106
deep cleaning 107
Print Head Holder 14
Print Head Lock Lever 14
Printing Area 146
Printing from a Memory Card 45
captured info 56
DPOF print 56
layout print 53
multi-photo print 50
photo index print 55
photo index sheet 57
print all photos 55
search 51
single-photo print 48
sticker print 54
trimming 52
Printing from Your Computer 83
Macintosh 85
Windows 83
Printing Photographs Directly from a Compliant
Device 71
Canon Bubble Jet Direct 76
Connecting 71
PictBridge 73
Printing Photographs from a Wireless
Communication Device 78
bluetooth 81
infrared 79
R
Reading from and Writing to a Memory Card 91
Rear Cover 15
Replacing Ink Tanks 98
Routine Maintenance 96
Replacing Ink Tanks 98
160
Index
S
Safety Precautions 5
SCAN button 16
Scanner Lock Switch 13
Scanning Images
attach to E-mail 90
open with application 90
save as PDF file 90
save to PC 90
scan film and save 90
Scanning Unit (Printer Cover) 14
Search button 16
Settings button 16
Specifications
Canon Bubble Jet Direct 150
copy 150
general 149
PictBridge 151
scan 152
Stop/Reset button 16
Systems Requirements 152
T
Trimming button 16
Troubleshooting 113
paper jams 127
Turning the Machine ON and OFF 17
U
USB Connector (for computer) 15
Chapter 14
161
162
Chapter 14
Chapter 14
163
This product uses the following copyrighted software:
exit.c
Copyright © 1990 The Regents of the University of California.
All rights reserved.
Redistribution and use in source and binary forms are permitted provided that
the above copyright notice and this paragraph are duplicated in all such forms
and that any documentation, advertising materials, and other materials related
to such distribution and use acknowledge that the software was developed by
the University of California, Berkeley. The name of the University may not be
used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED ''AS IS'' AND WITHOUT ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
environ.c Copyright © 1995, 1996 Cygnus Support.
All rights reserved.
Redistribution and use in source and binary forms are permitted provided that
the above copyright notice and this paragraph are duplicated in all such forms
and that any documentation, advertising materials, and other materials related
to such distribution and use acknowledge that the software was developed at
Cygnus Support, Inc. Cygnus Support, Inc. may not be used to endorse or
promote products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED ''AS IS'' AND WITHOUT ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
impure.c
string.h
_ansi.h
Copyright © 1994, 1997 Cygnus Solutions.
All rights reserved.
Redistribution and use in source and binary forms are permitted provided that
the above copyright notice and this paragraph are duplicated in all such forms
and that any documentation, advertising materials, and other materials related
to such distribution and use acknowledge that the software was developed at
Cygnus Solutions. Cygnus Solutions may not be used to endorse or promote
products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED ''AS IS'' AND WITHOUT ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
Getting Help from Canon
Help Us Help You Better
Before you contact Canon, please record the following information.
Serial Number (located inside the machine): ___________________________
Model Number (located on the front of the machine): ____________________
Machine Driver CD-ROM number (located on the CD-ROM): ______________
Purchase Date:__________________________________________________
Customer Technical Support Sequence*
1. Internet — www.canontechsupport.com
For quick and comprehensive self-help in an intuitively guided interactive troubleshooting
environment, the place to start is our helpful tech support web site. In addition, the latest
driver downloads, answers to frequently asked questions, product information, and
“where to buy” instructions are found here.
2. Email Tech Support —
www.canontechsupport.com
For individual attention to a special issue, try emailing our friendly technical engineers,
specially trained to communicate quick, easy, and logical solutions to your inquiries within
24 hours.
3. Toll-Free Live Tech Support — (1-800-828-4040)
This option provides live telephone technical support, free of service charges, MondaySaturday (excluding holidays), during your product’s 1 year limited warranty period. Telephone Device for the Deaf (TDD) support is available at (1-866-251-3752).
4. Extended Service and Support — www.canonesp.com
Canon CarePAK Extended Service Plan is a cost-attractive and easy-to-use extended
service program that provides up to three full years of service and support coverage at a
very attractive price. CarePAK offers toll-free Canon technical support and includes
Canon’s superb InstantExchange product replacement program. For further information
about extending your Canon service and support, call (1-800-385-2155), or visit our Web
site at www.canonesp.com. CarePAK must be purchased during your product’s warranty period.
For more information and updated program specifics, please visit our web site at
www.canontechsupport.com.
* Support program specifics are subject to change without notice.
Ordering Information
For additional supplies, use the following descriptions and order numbers.
Description
Order #
Ink Tanks
PGI-5 Black
CLI-8 Black
CLI-8 Cyan
CLI-8 Magenta
CLI-8 Yellow
CLI-8 Photo Cyan
CLI-8 Photo Magenta
0628B002
0620B002
0621B002
0622B002
0623B002
0624B002
0625B002
Canon Specialty Papers
Photo Paper Plus Glossy (4" x 6" / 20 sheets)
Photo Paper Plus Glossy (4" x 6" / 50 sheets)
Photo Paper Plus Glossy (4" x 6" / 120 sheets)
Photo Paper Plus Glossy (5" x 7" / 20 sheets)
Photo Paper Plus Glossy (8.5" x 11" / 20 sheets)
Photo Paper Plus Double Sided (5" x 7" / 10 sheets)
Photo Paper Plus Double Sided (8.5" x 11" / 10 sheets)
Photo Paper Plus Double Sided Album Kit (5" x 7")
Photo Paper Plus Double Sided Album Kit (8.5" x 11")
Photo Paper Plus Semi-Gloss (4" x 6" / 50 sheets)
Photo Paper Plus Semi-Gloss (8.5" x 11" / 20 sheets)
Photo Paper Pro for Borderless Printing (4" x 6" / 20 sheets)
Photo Paper Pro for Borderless Printing (4" x 6" / 75 sheets)
All Occasion Photo Cards (4" x 8" / 50 sheets)
Photo Paper Pro (8.5" x 11" / 15 sheets)
Photo Paper Pro (8.5" x 11" / 30 sheets)
Matte Photo Paper (8.5" x 11" / 50 sheets)
Photo Paper Glossy (4" x 6" / 50 sheets)
Photo Paper Glossy (4" x 6" / 100 sheets)
Photo Paper Glossy (8.5" x 11" / 50 sheets)
Photo Paper Glossy (8.5" x 11" / 100 sheets)
Glossy Photo Paper Credit Card Size
Transparencies (8.5" x 11" / 50 sheets)
High Resolution Paper (8.5" x 11" / 100 sheets)
7980A007
7980A012
7980A022
7980A019
7980A006
9981A006
9981A005
0041B005
0041B006
8386A010
8386A007
1029A014
1029A027
1029A055
1029A004
1029A028
7981A004
0775B021
0775B022
0775B023
0775B024
9157A023
1043A004
1033A011
Call 1-800-OK-CANON to locate a dealer near you, or visit the Canon eStore at
www.estore.usa.canon.com.
© 2006 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and may be a registered
trademark or trademarks in other countries. All other product and brand names are trademarks of their respective owners. As an ENERGY STAR® partner, Canon U.S.A., Inc. has determined that this product meets the ENERGY STAR®
guidelines for energy efficiency.
User’s Guide
QT5-0006-V07
XXXXXXXX
©CANON INC.2005
PRINTED IN THAILAND
User’s Guide
ENG
QT5-0006-V07
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising