F1 Model 812 - Power Sound Facilitair

F1 Model 812 - Power Sound Facilitair
F1 Model 812
Flexible Array Loudspeaker
• FLEX array: Bose® exclusive flexible baffle can be configured into four
unique shapes, allowing you to choose the best possible coverage pattern
for the application
• Eight-driver mid/high line array: Eight vertically mounted drivers, each
mounted on a custom waveguide, help deliver wide, consistent coverage
• 12-inch LF driver: High-performance woofer provides strong low-frequency
output
• 2-channel integrated mixer: 2 inputs with independent level controls
accommodate XLR, 0.25-inch and RCA connectors
Product Overview
The Bose® F1 Model 812 Flexible Array Loudspeaker is the first powered portable loudspeaker that lets you control its vertical
coverage pattern. Simply push or pull the array into position to create “Straight,” “C”, “J”, or “Reverse-J” coverage patterns.
And once set, the system automatically changes the EQ to maintain optimum tonal balance for each coverage ­pattern. So
whether you’re playing at floor level, on a stage, or facing raked seats or bleachers, you can now adapt your PA to match the
room. Engineered with a flexible array of eight high-output mid/high drivers, a ­high-powered 12-inch woofer, a lower crossover
point and 1,000-watt amplifier, the loudspeaker delivers high SPL performance while ­maintaining vocal and midrange clarity
that’s dramatically better than conventional ­loudspeakers.
TECHNICAL DATA SHEET
Key Features
Technical Specifications
System Performance
System Type
Frequency Response (-3 dB)
Frequency Range (-10 dB)
Nominal Dispersion
Maximum SPL @ 1 m
Crossover Frequency
Self powered, two-way
52 Hz - 15.5 kHz
43 Hz - 20 kHz
100° H x 40° V (C-position)
126 dB SPL (132 dB SPL peak)
600 Hz 4th order Butterworth
Amplification
System Power
Distortion at Rated Power
System Limiter
1000 W
0.1% Max (30 Hz - 15 kHz)
Dynamic limiter
Tranducers
Driver Compliment
Channels
Front Power Indictaor
Rear Indicators
Input Connections
Channel Gain
Maximum Input Signal
Input Impedance
Controls
8 x 2.25” mid-high drivers; 1 x 12” LF driver
Channel 1
Blue LED: system on
POWER/FAULT, LIMIT, FRONT LED, SIGNAL INPUT
XLR /1/4” XLR: Pin 1 (GND), Pin 2 (+), Pin 3 (-)
-Infinity to +34 dB (Line), -Infinity to +54 (MIC)
+24 dBu (Line), +18 dBu (MIC)
2.2 kΩ (MIC), 10 kΩ (Line)
Volume level, Signal input select, Front LED function select, EQ
Additional Connections
Line Output
AC Mains
XLR balanced
IEC Connector
Physical
Enclosure
Grille
Dimensions (H x W x D)
Net Weight
High impact composite materials
Powder-coated perforated steel grille
664.66 mm x 334.3 mm x 372.5 mm (26.1” x 13.1” x 14.6”)
20.18 kg (44.5 lbs)
Power Supply Voltages
Universal
AC power rating: 100-240 V, 50 / 60 Hz +/- 20 %, 200 W max
Channel 2
Blue LED: system on
POWER/FAULT, LIMIT, FRONT LED, SIGNAL INPUT
1/4” TS/TRS, (2) RCA
-Infinity to +26 dB (RCA), -Infinity to +20 dB (1/4”)
+10 dBu (RCA), +20 dBu (1/4” Unbalanced), +24 dBu (1/4”)
10 kΩ (1/4”), 10 kΩ (RCA)
Volume level, Signal input select, Front LED function select, EQ
1
OF 3
pro.Bose.com
F1 Model 812
Flexible Array Loudspeaker
TECHNICAL DATA SHEET
Inputs and Outputs
1. POWER/FAULT – indicates power/fault status
• Blue = power on
• Red = fault condition
2. LIMIT – AMBER = system limiting
3. FRONT LED – selector switch that controls LED
• POWER enables front LED to indicate power status
• LIMIT engages a limiting display on the front LED
• OFF turns off the front LED
4. EQ
• FULLRANGE allows the loudspeaker to function without high-pass filtering
• WITH SUB engages a high-pass filter when using the loudspeaker with the F1 subwoofer
5. LINE OUTPUT – balanced XLR line output provides a mix of input 1 and 2. Can be used to daisy chain speakers
together
6. POWER – on/off switch
7. AC – input connector
8. SIGNAL/CLIP – displays the input signal status in color
9. VOLUME – adjusts channel volume
10. SIGNAL INPUT – selector switch sets input sensitivity for input type. Connector accepts XLR or ¼” cable connections
11. MIC – selects sensitivity for mic inputs (dynamic or self-powered mics only) – use only when a mic is connected directly
to the input
12. LINE – selects sensitivity for line-level inputs, for example, from a mixer or DJ controller
13. RCA connectors – analog stereo input for audio sources such as DVD players, VCR players, video game consoles, DJ
­mixers, keyboards and other instruments
14. ¼” phone connector – provides analog input for guitars and other instruments. Accepts TRS balanced or TS
unbalanced cables
2
OF 3
pro.Bose.com
F1 Model 812
Flexible Array Loudspeaker
TECHNICAL DATA SHEET
Mechanical Drawings
For additional specifications and application information, please visit pro.Bose.com. Specifications subject to change without notice.
3
OF 3
pro.Bose.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising