Broan Rm503004 Quick Specs
SPECIFICATION SHEET
RM50000 SERIES
RANGE HOOD
A combination of Italian chimney hood design with
tremendous value to meet the requirements of
today’s conventional appliance and kitchen styles.
FEATURES
• Professional style design
• Finishes: 430 Stainless Steel #4 Brushed, White, Black
• Wall mount installation
• Seamless corners for easy cleaning
• Ducted/non-ducted telescopic flue - fits 8 ft. to 9 ft. ceilings
• 6” round duct connector/backdraft damper
• Includes non-ducted kit for indoor exhaust recirculation
• 290 cfm centrifugal blower
• Multi-speed slide control
• Dual incandescent lighting (2 x 40 W) (bulbs included)
• Dishwasher-safe aluminum filter features a quick-release
TYPICAL SPECIFICATION
Range hood shall be Broan Model RM50000.
Unit shall be for indoor use only.
Unit shall be convertible between ducted (using a washable
aluminum filter) and non-ducted (using a recirculation kit).
Motor to be permanently lubricated.
Unit shall have four-speed fan switch and separate light switch.
Sides shall be mitered and bottom edge hemmed - with no
sharp edges.
Air delivery shall be no less than 290 CFM.
Unit shall be U.L. and cUL listed.
latch and professional style appearance
• Available sizes: 30”, 35-7/16”
OPTIONS
• Replacement grease filter and bulbs available
• Replacement charcoal filters available (Model FILTEREB40
or Part No. SB03300495)
• Flue Extension for 10-ft. ceiling (ducted applications) (Model
•
RFX50 series in Stainless Steel, White and Black — 35”
long)
Flue Extension for 10-ft. ceiling (non-ducted applications)
(Model RFXN5004 in Stainless Steel only — 35” long)
SPECIFICATIONS
VOLTS
120
AMPS
CFM
SONES
DUCT
2.86
290
6.5
6” round
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed
by the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers. Product
performance is rated at 0.1 in. static pressure, based
on tests conducted in a state-of-the-art test laboratory.
Sones are a measure of humanly-perceived loudness,
based on laboratory measurements.
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
Broan-NuTone Canada Mississauga, Ontario www.broan.ca 877-896-1119
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
11C
Date
99043162F
RM50000 SERIES WIRING
6-1/4”
3-1/8”
120 VOLT 60 HZ GROUNDED WALL OUTLET
OFFSET FROM DUCT CENTER LINE
(STAY WITHIN 6-1/4” DIMENSION)
CENTERLINE OF
DUCT & HOOD
19” - 22”
RM50000 SERIES MOUNTING
FRAMING BEHIND
WOOD CROSS
SUPPORT
WOOD CROSS SUPPORT –
SECURED TO FRAMING AND
LOCATED BEHIND DRYWALL
L
C
L
5
DRYWALL
1
16 "
MOUNTING BRACKET
LOCATION
(ABOVE 36” HIGH
COOKTOP)
CEILING
DUCT HEIGHT
METHOD
8 FEET
9 FEET
10 FEET
MOUNTING DISTANCE ABOVE 36” HIGH COOKTOP (SEE NOTE 1)
24”
25”
26”
27”
28”
29”
30”
MOUNTING BRACKET LOCATION ABOVE 36” HIGH COOK TOP
DUCTED OR
NONDUCTED
37”
38”
39”
40”
DUCTED OR
NONDUCTED
42”
43”
DUCTED OR
NONDUCTED
(SEE NOTE 2)
40”
41”
42”
43”
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
Broan-NuTone Canada Mississauga, Ontario www.broan.ca 877-896-1119
NOTES:
1. Minimum hood distance above cooktop must not be less than 24”.
A maximum of 30” above the cooktop
is highly recommended for best
capture of cooking impurities.
Distances over 30” above the cooktop
are at the installer’s and user’s discretion - providing that ceiling height and
flue length permit.
2. Requires optional 10-foot flue extension model RFX5004 (ducted) or
RFXN5004 (non-ducted).
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising