Brother P-Touch 1130 Owner Manual
The Brother P-Touch 1130 is a compact and portable label maker that allows you to create customized labels for a variety of purposes. With its easy-to-use interface and a wide range of features, the P-Touch 1130 is perfect for home, office, or on-the-go labeling needs. Create labels up to 1/2" wide using a variety of tapes, including standard laminated tapes, decorative tapes, and heat-shrink tube. Choose from a variety of fonts, symbols, and frames to personalize your labels.
Advertisement
Advertisement
Although this machine is easy to use, we suggest that you read this manual carefully before starting and elated to this product er, ev
USP5120147
USP5069557
USP5009530
USP4983058
Patent numbers and patent publication numbers which are r
INTRODUCTION
authority to operate the equipment.
oved by Brother Industries, Ltd.
could void the user’s
Changes or modifications not expressly appr
Consult the dealer or an experienced radio/TV technician for help.
ent from that to which the eceiver.
Connect the equipment to an outlet on a circuit differ eceiving antenna.
Reorient or relocate the r interference by one or more of the following measures: interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by aged to try to correct the
there is no guarantee that . How provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
. These limits are designed to adio communications rt 15 of the FCC Rules
This equipment has been tested and found to comply with the limits for a Class B inting. The quality and
FCC NOTICE
.
actical machine.
, pursuant to Pa or future reference es it an extremely pr y about urgent tasks that require professional pr xciting colors.
mance of the PT -1130 mak ve to worr character sizes and styles to design beautiful custom labels. In addition, the variety of tape cartridges
MODEL PT-1130
,
USER’S GUIDE
y frames y application. Select from the man ou to print labels with different widths and e ou can create labels for an
LA5055001
Printed in China
Increase the separation between the equipment and r receiver is connected.
-
-
-
-
turning the equipment off and on, the user is encour
USP4976558
USP4927278
USP4839472 are as below: interference to r digital device keep the manual in a handy place f le allows y w PT -1130, y With your ne
Y ou no longer ha availab perfor
GENERAL PRECAUTIONS
• Use only Martha Stewart Everyday MTZ or Brother TZ tapes with this machine. Do not use any other tapes.
• Tapes are available in three different widths: 1/4” (6 mm), 3/8” (9 mm) and 1/2” (12 mm).
• Do not pull the tape since this may damage the tape cassette.
• Do not attempt to cut the tape while printing or feeding since this will damage the tape.
• Do not clean the machine with alcohol or other organic solvents. Use only a soft, dry cloth.
• Remove the batteries and disconnect the AC adapter if you do not intend to use the machine for an extended period of time.
Note: If power is disconnected for more than three minutes, all text shown in the display and any text files stored in the memory will be lost.
• Do not put any foreign objects into or anything on the machine.
• Do not expose the machine to high temperatures or high humidity. Never leave it on the dashboard or in the back of your car.
• Do not use the machine in dusty places, and keep it out of both direct sunlight and rain.
• Do not leave any rubber or vinyl on the machine for an extended period of time.
Doing so may cause staining.
• After inserting a new tape cassette, advance the tape by holding down and pressing once.
• Do not touch the print head mechanism. If the head is touched, clean it immediately with a soft wipe (e.g., a cotton swab) to avoid permanent damage.
• To avoid injuries, do not touch the cutter’s edge.
• Use only the AC adapter designed exclusively for this machine. Use of any other adapter will void the warranty.
Please contact a Brother dealer for details.
POWER SUPPLY
Batteries
Since this machine is compact and portable, it can be used anywhere by installing six
AAA alkaline batteries (LR03). When changing the batteries, always replace all six at the same time.
1 Press in on the rough area at the top end of the machine and fold open the back cover.
2 If batteries are already installed, remove the tape cassette (if one is installed) by pulling it straight out, and then remove the batteries.
3 Insert the batteries into the battery compartment with the positive end of the bottom three batteries pointing toward the top end of the machine, and the positive end of the top three batteries pointing in the opposite direction.
Note: When replacing the batteries, insert the new ones within three minutes of removing the old ones, otherwise all text shown in the display and any text files stored in the memory will be lost (unless the machine is plugged into an outlet with the AC adapter).
4 Securely close the back cover, making sure that it snaps into place.
Optional AC adapter
The AC adapter allows you to use this machine wherever an electrical outlet is available.
Use Brother’s AD-30 adapter for your new PT-1130.
1 Insert the plug on the adapter cord into the adapter jack on the bottom end of the machine.
2 Insert the plug into the nearest standard electrical outlet.
REPLACEMENT TAPE CASSETTES
A tape cassette is supplied with this unit. Martha Stewart Everyday MTZ or Brother TZ tapes used with this machine are available in a variety of colors and three tape widths (1/
4” (6 mm), 3/8” (9 mm) and 1/2” (12 mm)).
1 Press in on the rough area at the top end of the machine and fold open the back cover.
2 If a tape cassette is already installed, remove it by pulling it straight up.
3 If the ink ribbon in the other tape cassette is loose, use your finger to wind the toothed wheel in the direction of the arrow on the cassette until there is no slack in the ribbon. Also, make sure that the end of the tape feeds under the tape guides.
Note: If you are using a new tape cassette provided with a stopper, be sure to remove the stopper.
4 Insert the tape cassette firmly into the compartment, making sure that the entire back of the cassette contacts the bottom of the compartment.
Note: When inserting a tape cassette, make sure that the inner ribbon does not catch on the corner of the metal guide.
5 Securely close the back cover, making sure that it snaps into place.
6 Feed the tape by holding down and pressing and then push in the tape cutter lever to cut the tape.
once,
STARTING
Press . If batteries have been installed or the machine has been plugged in using the optional AC adapter, the previous session’s information is displayed when the machine is turned on. This feature allows you to stop work on a label and turn off the machine, then return to it later without having to re-enter the text.
The machine automatically turns off if no key is pressed within five minutes. The current session’s information is stored in the machine’s internal memory and displayed when the machine is later turned on again.
CODE KEY
By holding down and pressing a key with a function, character or accent written above it, you can use the corresponding function or add the corresponding character to your text.
CAPS KEY
By pressing to enter Caps mode, you can add upper-case letters to your text by simply pressing the character keys. When this mode is on, the Caps indicator in the topleft corner of the display comes on. To exit Caps mode, press indicator goes off.
until the Caps
NUM KEY
By pressing to enter Num mode, you can add numbers to your text by simply pressing the corresponding keys. When this mode is on, the Num indicator in the bottomleft corner of the display comes on. To exit Num mode, press indicator goes off.
until the Num
DISPLAY
This machine’s LCD shows one row of 8 characters; however, the text that you enter can be up to 55 characters in length. The 8-character display is like a window which moves across the text.
SPACE KEY
As on a word processor, press to add a blank space to your text.
RETURN KEY
Press when you wish to accept or confirm a setting, or end the first line of text and start the second.
● To add a second line, press once. The return mark ( ) appears in the text to indicate the end of the first line and the beginning of the second.
Note: Two lines of text can only be entered if 3/8” (9-mm)- or 1/2” (12-mm)-wide tape is installed.
● To accept or confirm a setting from a list, press once.
ACCENTED CHARACTERS
You can also choose from a list of other accented characters that can be added to your text.
Letter
N
O
U
E
I
A
C
Ñ
Ó
Ù
È
Í
À
Ç
Ö
Ú
É
Ï
Á
Accented character
Ä Â Ã Æ
Ô
Ü
Ë
Î
Ê
Õ
Û
Letter n o u e i a c
ñ
ó
ù
è
í
à
ç
ö
ú
é
ï
á
Accented character
ä â ã æ
ô
ü
ë
î
ê
õ
û
1 Press if you want the accented character to be an upper case letter.
Note: To quit the following procedure at any time without making any changes, press
2 Hold down and press . The message “A-U?” appears in the display.
3 Press the key for the letter in the accented character that you wish to add, and then press character.
4 Press
and until the cursor is positioned under the desired accented
to add the selected character to your text.
.
SYMBOLS
In addition to the letters, symbols, and numerals on and above the keys, there are 72 symbols available with the Symbol function. These symbols are divided into 9 groups, corresponding to the letters A through I.
Group
C
D
A
B
E
F
Õ
·
Ü
í
$
4
õ
°
¢
TM
ü
ó
Ñ
;
Ç
ú
[
®
ç
★
ñ
%
]
©
Symbols
¡
+
Æ
Ã
2
æ
ã
¿
×
3
á
§
÷
2
é
#
=
3
G
H
I _ ~
1 Press . The message “A-I?” appears in the display.
2 Press the key for the letter of the group containing the symbol that you wish to add, and then press
3 Press
and until the cursor is positioned under the desired symbol.
to add the symbol to the text.
OVERVIEW
Display
Backspace key
Return key
Tape cutter lever
Function key
Back cover
SIZE
The characters in the text can be set to one of five different sizes in addition to AUTO, which automatically adjusts the characters to the largest possible size according to the width of the installed tape. The currently selected size setting is shown by the indicators at the top of the display. All of the size indicators light up when the AUTO setting is selected.
SIZE 1 (A: standard size) SIZE 2 (A: double width) SIZE 3 ( A : double height)
Caps key
Num key On/Off key
Batteries
Tape cassette
Print head
Tape exit slot
1234567890123456789012345678901234567890123456789012345
CURSOR MOVEMENT
You can view and edit different parts of the text by moving the cursor backward and forward.
● To move the cursor one character at a time, press or .
● To move the cursor to the beginning of the text, hold down and press
● To move the cursor to the end of the text, hold down and press .
.
BACKSPACE KEY
This key can be used to remove characters from your text, clear all of the text or cancel the current function and return to the text input mode.
● To delete the character to the left of the cursor or to cancel a function, press .
● To clear all of the text that is currently entered, hold down and press .
SIZE 4 ( A : double width & double height) SIZE 5 ( A : 4
×
width & double height)
Note:
• If there are two lines of text, they are printed with the SIZE1 setting applied, regardless of the selected size setting.
• To quit the following procedure at any time without making any changes, press
1 Press .
2 Press and until SIZE is displayed, and then press current size setting appears in the display.
3 Press
4 Press
and
(or
until the desired size setting is displayed.
) to apply the selected size setting to the text.
(or ). The
.
STYLE
You can also use one of nine different print styles for the characters in your label. If a setting other than NORMAL is selected, the Style indicator at the bottom of the display lights up.
NORMAL OUTLINE BOLD
SHADOW
I+BOLD (italic + bold)
POINTING
ITALIC
UNDERLINE/FRAME
I+OUTL (italic + outline)
I+SHADOW (italic + shadow) VERTICAL
Note:
• If there are two lines of text, they are printed in the NORMAL style, regardless of the selected style setting.
• To quit the following procedure at any time without making any changes, press .
1 Press .
(or ). The 2 Press and until STYLE is displayed, and then press current style setting appears in the display.
3 Press
4 Press
and
(or
until the desired style setting is displayed.
) to apply the selected style setting to the text.
This option allows you to emphasize or decorate your entire text by framing or underlining it. If any setting other than OFF is selected, the Undl/Frm indicator at the bottom of the display lights up.
OFF (no underline or frame) ROUND WOODEN
Note:
• The underline or frame is not printed if the VERTICAL style setting is used.
• To quit the following procedure at any time without making any changes, press
1 Press .
2 Press and until UNDL/FRM is displayed, and then press
The current underline/frame setting appears in the display.
3 Press and
(or
until the desired underline/frame setting is displayed.
4 Press (or ) to apply the selected underline/frame setting to the text.
.
).
MIRROR PRINTING
CANDY UNDL (underline)
This function prints your label so that the text can be read from the adhesive side of the tape. If mirror-printed labels are attached to glass or some other transparent material, they can be read correctly from the opposite side.
Note:
• With this function, the text must be printed on transparent tape.
• To quit the following procedure at any time without making any changes, press
1 Press .
.
2 Press and until MIRROR is displayed, and then press current mirror printing setting appears in the display.
3 Press
4 Press
and
(or
(or
until the desired mirror printing setting is displayed.
) to apply the selected mirror printing setting to the text.
). The
PRINTING & CUTTING
After you have entered the text and chosen the desired format settings, you are ready to print the label.
● To print the label, press . The message “PRINT” is displayed while the label is being printed, and the label comes out of the tape exit slot at the top end of the machine.
● To feed out 1 1/24” (25 mm) of tape (for example, after printing using the “–” tape margin setting), hold down and press once. The message “FEED” is displayed while the tape is fed out.
● To cut off the label, push in the tape cutter lever in the top-right corner of the machine.
Note:
• In order to prevent damage to the tape, do not try to cut it while the messages
“PRINT” or “FEED” are displayed.
• After printing with the # or ## tape margin setting, push in the tape cutter lever to cut off the label, and then use scissors to cut along the printed dots (:) and center the text within the label.
REPEAT PRINTING
This function allows you to print up to nine copies of the same label.
Note: To quit the following procedure at any time without making any changes, press
1 Press .
.
2 Press and until REPEAT is displayed, and then press message “1-9?” appears in the display.
(or ). The
3 Press and until the number of labels that you want to print appears on the right side of the display.
OR
Press the key (1-9) corresponding to the number of labels that you want to print.
4 Press (or or ) to print the labels.
Note:
• After printing with the “–” tape margin setting, hold down and press once to feed the tape before pushing in the tape cutter lever to cut it.
• After printing with the #, ## or ### tape margin setting, push in the tape cutter lever to cut off the tape, and then use scissors to cut along the printed dots (:) and separate the labels.
NUMBERING
This function can be used to print many copies of the same text while increasing a selected number by 1 after each label is printed, for example, when printing labels containing a serial number (for example, 0123, 0124, and 0125).
Note: To quit the following procedure at any time without making any changes, press
1 Position the cursor below the number that you wish to increase.
2 Press .
.
3 Press and until NUMBER is displayed, and then press (or ).
The message “1-9?” appears in the display.
4 Press and until the last number that you want to print appears on the right side of the display.
OR
Press the key (1-9) corresponding to the last number that you want to print.
Note: The last number that will be printed must be larger than the number selected in the text, otherwise the message “ERROR” will appear when you try to print.
5 Press
Note:
(or or ) to print the labels.
• After printing with the “–” tape margin setting, hold down and press once to feed the tape before pushing in the tape cutter lever to cut it.
• After printing with the #, ## or ### tape margin setting, push in the tape cutter lever to cut off the tape, and then use scissors to cut along the printed dots (:) and separate the labels.
TAPE MARGIN
This function can be used to leave equal margins of 1/6” (4 mm (#)), 1/2” (12 mm (##)) or
1” (24 mm (###)) on both sides of the text. Using the “–” tape margin setting, multiple formats can be printed, one after the other without feeding the tape, onto a single label.
Note: To quit the following procedure at any time without making any changes, press .
1 Press .
2 Press and until MARGIN is displayed, and then press current tape margin setting appears in the display.
(or ). The
3 Press and until the desired tape margin setting is displayed.
4 Press
Note:
(or ) to apply the selected tape margin setting to the text.
• After printing with the “–” tape margin setting, hold down and press once to feed the tape before pushing in the tape cutter lever to cut it, otherwise some of the printed characters may be cut off.
• After printing with the # or ## tape margin setting, push in the tape cutter lever to cut off the label, and then use scissors to cut along the printed dots (:) and center the text within the label.
MEMORY
You can use the memory to store your most frequently used text. The text file remains in the memory, even after all characters are removed from the display by holding down and pressing . Later, the text can easily be reused by recalling it from the memory.
The machine’s memory can store up to 300 characters, which can be divided into as many as nine text files. The maximum capacity for a single text file is 55 characters.
STORING TEXT
Note: To quit the following procedure at any time without making any changes, press
1 Press .
2 Press and until MEMORY is displayed, and then press (or
.
).
3 Press and until STORE is displayed, and then press message “1-9?” appears in the display.
(or ). The
4 Press and until the file number where you want to store the text is displayed.
OR
Press the key (1-9) corresponding to the file number where you want to store the text.
5 Press (or ) to store the text. The text previously shown in the display reappears.
Note:
• If the file number you selected already contains text, the message “ERROR” appears. Press (or ), and then select a different file number.
• If nine text files are already stored, the message “ERROR” appears. Press
(or ), and then delete one of the stored text files before trying to store the current text.
• If 300 characters are already stored, the message “FULL” appears. Press
(or ), and then delete one of the stored text files before trying to store the current text.
RECALLING TEXT
Note: To quit the following procedure at any time without making any changes, press
1 Press .
2 Press and until MEMORY is displayed, and then press (or
.
).
3 Press and until RECALL is displayed, and then press message “1-9?” appears in the display.
(or
4 Press
5 Press
and
OR
Press the key (1-9) corresponding to the file number of the text that you want to recall.
(or
until the text file that you want to recall is displayed.
) to clear the display and recall the selected text.
). The
DELETING A TEXT FILE
Note: To quit the following procedure at any time without making any changes, press
1 Press .
2 Press and until MEMORY is displayed, and then press (or
.
).
3 Press and until DELETE is displayed, and then press message “1-9?” appears in the display.
(or
4 Press and until the text file that you want to delete is displayed.
OR
Press the key (1-9) corresponding to the file number of the text that you want to delete.
5 Press (or ) to delete the selected text file.
). The
ERROR MESSAGE LIST
ERROR
BATTERY
B A T T E R Y
FULL
An error occurred.
The batteries are weak.
The batteries are dead.
The maximum number of characters (55 characters) have already been entered or the memory is full.
TROUBLESHOOTING
Problem
1. The display stays blank after you have turned on the machine.
2. The machine does not print, or the printed characters are blurred.
3. The printed characters are not formed properly.
4. Striped tape appears.
5. The memory has cleared on its own.
6. A blank horizontal line appears through the printed label.
7. The machine has “locked up” (i.e., nothing happens when a key is pressed, even though the machine is on).
Solution
• Check that the batteries are correctly inserted.
• If the batteries are weak, replace them.
• Check that the adapter is correctly connected.
• Check that the tape cassette has been inserted correctly.
• If the tape cassette is empty, replace it.
• Check that the character size is appropriate for the width of the tape that is used.
• If the batteries are weak, replace them.
• The tape cassette is empty. Replace it.
• The batteries may be weak. Replace them.
• There may be some dust on the print head. Remove the tape cassette and use a dry cotton swab to gently wipe the print head with an up-and-down motion. Try printing again, and if dust still remains, dip the cotton swab in isopropyl (rubbing) alcohol and gently wipe the print head again.
• Turn off the machine, and then while holding down and , press
to tur n the machine back on.
Finally, release and .
Note: The text and formats in the display and all text files stored in the memory are erased.
SPECIFICATIONS
Keyboard:
Print speed:
Character size:
Character font:
Print tape:
LCD:
Power supply:
Dimensions:
Weight:
Buffer size:
Memory size:
42 keys
10 mm/sec.
Standard size
Double width
Double height
Double width & double height
4
× width & double height
HELSINKI
Pressure-sensitive adhesive-based (MTZ or TZ)
Three widths available:
1/2” (12 mm)
3/8” (9 mm)
1/4” (6 mm)
7
×
5 dots 1 line
×
8 characters
Six AAA size alkaline batteries (LR03) or optional AC adapter
(7V, 1.2A)
Auto-power off
6 1/16” (154 mm) (W)
×
5 5/64” (129 mm) (D)
×
2 1/2” (64 mm) (H)
0.9 lbs. (400 g) (without batteries and tape cassette)
55 characters
300 characters maximum, 9 text files
IMPORTANT WARRANTY INFORMATION
Thank you for purchasing this Martha Stewart Everyday product. We hope that you will enjoy using it. We suggest that you keep all packing and other materials.
SHOULD YOU ENCOUNTER ANY PROBLEMS WITH YOUR PRODUCT,
PLEASE DO NOT RETURN YOUR
PRODUCT TO THE STORE!
After referring to the instruction manual, if you still need assistance, call Brother Customer
Service at:
Voice: 1-877-478-6824
Fax: 1-901-379-1210
If you need a local service center, please call 1-800-284-HELP to locate the authorized service center closest to you.
Advertisement