Micro HI-FI Component System

Micro HI-FI Component System
4-423-934-72 (1)
Location of Controls
 Compatibility with all MP3 encoding/writing software, recording
device, and recording media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted audio or may not play
at all.
Operations
Unit (Top)
Remote
To use the remote
Remove the battery compartment lid, and insert the two
supplied R6 (size AA) batteries,  side first, matching
the polarities shown below.
Micro HI-FI
Component System
Playing a CD/MP3 disc
1 Select the CD function.
Press CD FUNCTION  on the remote or press
FUNCTION  on the unit repeatedly.
2 Open the CD door.
Press  (Open/Close)  on the unit.
 (Open/Close) 
GB Operating Instructions
 Display panel
When the system is powered up, the setting status appears on the display panel.
When the system goes to Standby mode, the setting status disappears from the display panel.
 With normal use, the batteries should last for about 6 months.
 Do not mix an old battery with a new one or mix different types of
batteries.
 If you do not use the remote for a long period of time, remove the
batteries to avoid damage from battery leakage and corrosion.
Printed in China
1 Select the CD function.
Press CD FUNCTION  on the remote or press
FUNCTION  on the unit repeatedly.
Press PLAY MODE  repeatedly until “PGM”
appears while the player is stopped.
3 Select a folder (MP3 disc only).
Press
folder.
+/  repeatedly to select the desired
4 Select the desired track or file number.
Remote sensor
©2012 Sony Corporation
Creating your own program
(Program Play)
2 Select the play mode.
Notes on using the remote
Unit (Front)
* This include folders that have no MP3 or other files. The number
of folders that the system can recognize may be less than actual
number of folders, depending on the folder structure.
Press /  repeatedly until the desired track
or file number appears.
Remote indicator
3 Set a disc.
CMT-V10iP
Europe Only
Disposal of waste batteries
(applicable in the European
Union and other European
countries with separate
collection systems)
The nameplate is located on the bottom exterior of the
main unit and on the surface of the AC adaptor.
This symbol on the battery or on the packaging indicates
that the battery provided with this product shall not be
treated as household waste.
On certain batteries this symbol might be used in
combination with a chemical symbol. The chemical
symbols for mercury (Hg) or lead (Pb) are added if the
battery contains more than 0.0005% mercury or 0.004%
lead.
By ensuring these batteries are disposed of correctly,
you will help prevent potentially negative consequences
for the environment and human health which could
otherwise be caused by inappropriate waste handling of
the battery. The recycling of the materials will help to
conserve natural resources.
In case of products that for safety, performance or data
integrity reasons require a permanent connection with an
incorporated battery, this battery should be replaced by
qualified service staff only. To ensure that the battery will
be treated properly, hand over the product at end-of-life
to the applicable collection point for the recycling of
electrical and electronic equipment.
For all other batteries, please view the section on how
to remove the battery from the product safely. Hand the
battery over to the applicable collection point for the
recycling of waste batteries.
For more detailed information about recycling of this
product or battery, please contact your local Civic Office,
your household waste disposal service or the shop where
you purchased the product.
CAUTION
Note on DualDiscs
WARNING
To reduce the risk of fire, do not cover the ventilation
opening of the apparatus with newspapers, tablecloths,
curtains, etc. Do not place the naked flame sources such
as lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not expose
this apparatus to dripping or splashing, and do not place
objects filled with liquids, such as vases, on the apparatus.
Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.
As the main plug of AC adaptor is used to disconnect
the AC adaptor from the mains, connect it to an easily
accessible AC outlet. Should you notice an abnormality
in it, disconnect it from the AC outlet immediately.
Do not expose batteries or apparatus with batteryinstalled to excessive heat such as sunshine, fire or the
like.
The AC adaptor is not disconnected from the mains as
long as it is connected to the AC outlet, even if the main
unit itself has been turned off.
The use of optical instruments with this product will
increase eye hazard.
This appliance is classified
as a CLASS 1 LASER
product. This marking
is located on the bottom
exterior of the main unit.
Notice for customers: the following
information is only applicable to
equipment sold in countries applying EU
directives.
This product has been manufactured by or on behalf
of Sony Corporation, 1-7-1 Konan Minato-ku Tokyo,
108-0075 Japan. Inquiries related to product compliance
based on European Union legislation shall be addressed
to the authorized representative, Sony Deutschland
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,
Germany. For any service or guarantee matters, please
refer to the addresses provided in the separate service or
guarantee documents.
Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)
This symbol on the product or on its packaging indicates
that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and
electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the
product.
Applicable accessory: Remote commander
Push the center part of the disc with two fingers until
the disc snaps into its mounted position.
Set a disc with the
label side facing
forward.
CD door
(CD compartment)
iPod/iPhone connector
 Remote indicator
Lights in amber when a signal is received from the remote.
 This manual mainly explains operations using the
remote, but the same operations can also be performed
using the buttons on the unit having the same or
similar names.
 The SLEEP and TIMER MENU functions indicated in
pink on the remote can be activated using SHIFT .
If you want to operate the SLEEP or TIMER MENU
functions, press and hold SHIFT  and press SLEEP
 or TIMER MENU  button. If you press either
of these buttons without holding SHIFT  pressed,
the system will activate the BASS BOOST or SOUND
EFFECT function.
5 Program the selected track or file.
 to enter the selected track or file.
Press
“--.--” appears when the total playing time exceeds
100 minutes for an CD or when you program MP3
files.
6 Repeat steps 3 through 5 to program additional
tracks or files, up to a total of 25 tracks or files.
7 To play your program of tracks or files, press  
4 Close the CD door.
Press  (Open/Close)  on the unit.
“READING” appears.
5 Start playback.
Press   on the remote or press   on the
unit.
To eject a disc
Press  (Open/Close)  on the unit and remove the
disc by pulling up the edge of the disc while holding one
finger against the spindle.
Getting Started
To use the iPod/iPhone
Setting the clock
1 Open the dock by pushing the center of the dock.
1 Press   to turn on the system.
2 Press and hold SHIFT  and TIMER MENU  to
select the clock set mode.
3
If “PLAY SET” flashes, press /  repeatedly to
select “CLOCK,” and then press
(enter) .

Press /
repeatedly to set the hour, then press
(enter) .
4 Use the same procedure to set the minutes.
Note
The clock settings are reset when you disconnect the power cord or if
a power failure occurs.
Music discs encoded with copyright
protection technologies
To display the clock when the system is off
This product is designed to playback discs that conform
to the Compact Disc (CD) standard. Recently, various
music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
playable by this product.
Dock
2 Place the iPod/iPhone.
Press DISPLAY . The clock is displayed for about
8 seconds.
 The system will automatically close the CD door  if a few minutes
elapse of no operation with the CD door open.
 Do not set a disc with non-standard shapes (e.g., heart, square, star).
The disc may fall into the system and cause irreparable damage.
 If you press /  with the CD door open, the system will
automatically close the CD door.
 Do not use a disc with tape, seals or paste on it as this may cause a
malfunction.
 When you eject a disc, handle the disc by its edge. Do not touch the
surface.
License and Trademark Notice
Stop playback
Select a folder on
an MP3 disc
Select a track or
file
Find a point in a
track or file
+/ .
Hold down /  (or
/  on the unit) during
playback, and release the button at
the desired point.
REPEAT  repeatedly until “ ” or
“ 1” appears.
  on the unit.
Notes on Repeat Play
 To AC Adaptor
 AM loop antenna
 FM lead antenna (Extend it horizontally.)
Connect an external audio component.
 Antennas
Find a location and an orientation that provide good
reception, and then set up the AM antenna.
Keep the antenna away from the power cord to avoid
picking up noise.
Listening to the radio
1 Select the TUNER function.
Press TUNER FM/AM FUNCTION  on the remote
repeatedly or press FUNCTION  on the unit
repeatedly.
2 Perform tuning.
/ // .
*When playing a CD-DA (audio) disc, FLDR (SHUF) Play performs
the same operation as normal (SHUF) Play.
 AUDIO IN jack
Press CLEAR  while the player is stopped.
Press TUNING MODE  repeatedly until “AUTO”
appears, and then press +/ . Scanning stops
automatically when a station is tuned in, and
“TUNED” and “STEREO” (for stereo programs only)
light up in the display.
Press PLAY MODE  repeatedly while the player
is stopped. You can select Normal Play mode
(“Normal” or “FLDR” for all MP3 files in the folder on
the disc), Shuffle Play mode (“SHUF” or “FLDR SHUF*”
for folder shuffle), or Program Play mode (“PGM”).
1 Connect the AC adaptor to the unit.
2 Plug the AC adaptor into a wall outlet.
To delete the last track or file of the program
For automatic scanning
Press
  (or   on the unit). To
resume play, press the button again.
 .
To change the play mode
 Power (DC IN 9.5 V)
Press PLAY MODE  repeatedly until “PGM”
disappears while the player is stopped.
To
Pause playback
Eject a disc
®
To cancel Program Play
Other operations
Select Repeat Play
 iPhone, iPod, iPod classic, iPod nano, and iPod touch
are trademarks of Apple Inc., registered in the U.S. and
other countries.
 MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and Thomson.
 Windows Media is either a registered trademark or
trademark of Microsoft Corporation in the United
States and/or other countries.
 This product is protected by certain intellectual
property rights of Microsoft Corporation. Use or
distribution of such technology outside of this product
is prohibited without a license from Microsoft or an
authorized Microsoft subsidiary.
 All other trademarks and registered trademarks are of
their respective holders. In this manual, and marks
are not specified.
(or   on the unit).
The program remains available until you remove the
disc from the disc compartment  or unplug the
power cord.
To play the same program again, press   (or 
 on the unit).
Notes
A DualDisc is a two sided disc product which mates
DVD recorded material on one side with digital
audio material on the other side. However, since the
audio material side does not conform to the Compact
Disc (CD) standard, playback on this product is not
guaranteed.
™
Selected track or file
Total playing time
number
Total playing time for all the programmed tracks or
files, including the selected track or file, is displayed at
right on the panel.
 “ ” indicates that all tracks or files will be repeated until you stop
playback.
 “ 1” indicates that a single track or file will be repeated until you
stop playback.
Notes on Shuffle Play mode
 When Shuffle Play mode is set to “SHUF,” the system shuffle-plays
all tracks or files on the disc. When Shuffle Play mode is set to
“FLDR SHUF,” the system shuffle-plays all tracks or files in selected
folder.
 When you turn off the system, the selected Shuffle Play mode
(“SHUF” or “FLDR SHUF”) is cleared and the play mode returns to
Normal Play mode (“FLDR”).
Notes on playing MP3 discs
 Do not save other types of tracks or files, or unnecessary folders on a
disc that has MP3 files.
 Folders that have no MP3 files are skipped.
 The system can only play MP3 files that have a file extension of
“.mp3.”
 Even when file name has the “.mp3” file extension, if the actual
file differs, playing this file may generate a loud noise which could
damage the system may malfunction.
 The maximum number of:
255* folders (including the root folder)
512 MP3 files
512 MP3 files in a single folder
9 folder levels (in the tree structure of files)
If “TUNED” does not light up and the scanning does
not stop, press   to stop scanning, then perform
manual tuning (below).
When you tune in a station that provides RDS
services, information such as the service name or
station name is provided by broadcasts.
For manual tuning
Press TUNING MODE  repeatedly until
“MANUAL” appears, and then press +/ 
repeatedly to tune in the desired station.
Tip
To reduce static noise on a weak FM stereo station, press FM MODE
 repeatedly until “MONO” appears to turn off stereo reception.
Presetting radio stations
1 Tune in the desired station.
2 Press TUNER MEMORY  to select the tuner
memory mode.
Preset number
3 Press +/  or ///  repeatedly to select
the desired preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
station.
4 Press  to register the station.
5 Repeat steps 1 through 4 to register other stations.
You can preset up to 20 FM and 10 AM stations.
To tune in to a preset radio station
If you registered a radio station to a preset number 1
to 6, the radio station will be tuned in by just pressing
the TUNER MEMORY NUMBER (1 to 6)  when the
system function is set to AM or FM.
If you registered a radio station to a preset number 7
or higher, press TUNING MODE  repeatedly until
“PRESET” appears then press +/  repeatedly to
select the desired preset number.
1 Select the iPod function.
Press iPod FUNCTION  on the remote or press
FUNCTION  on the unit repeatedly.
2 Place the iPod/iPhone.
3 Start playback.
Note on the play mode
When you turn off the system, the selected Shuffle Play mode
(“SHUF”) is cleared and the play mode returns to Normal Play mode.
 When Shuffle Play mode is set to “SHUF,” the system shuffle-plays
all audio files on the USB device. When Shuffle Play mode is set to
“FLDR SHUF,” the system shuffle-plays all audio files in selected
folder.
 When you turn off the system, the selected Shuffle Play mode
(“SHUF” or “FLDR SHUF”) is cleared and the play mode returns to
Normal Play mode (“FLDR”).
Notes on Repeat play
Press   on the remote or press   on the
unit.
To control the iPod/iPhone
Pause
Select a track
or chapter of
audiobook/
podcast
Find a point in a
track or chapter
of audiobook/
podcast
Choose the
selected item
Scroll up/down
the iPod menus
Return to the
previous menu or
select a menu
Select the Shuffle
Play to On or Off
Select Repeat Play
Press PLAY MODE  repeatedly while the player is
stopped. You can select Normal Play mode (playback
in sequence of all files on the USB device), Folder
Play mode (“FLDR” for all files in the specified folder
on the USB device), Shuffle Play mode (“SHUF” or
“FLDR SHUF” for folder shuffle), or Program Play mode
(“PGM”).
Press
 /  (or   on the
unit).
 .
/ . To fast-forward or
fast-rewind, hold down the button.
Hold down /  during
playback, and release the button at
the desired point.
.
/ .
TOOL MENU /RETURN .
PLAY MODE .
REPEAT  repeatedly.
To use the system as a battery charger
You can use the system as a battery charger for an iPod/
iPhone whether the system is on or off.
To see whether charging is operating or not, check
the battery icon of the iPod/iPhone display. Check the
“iPod/iPhone section” of the “Specifications” for a list of
iPod/iPhone models compatible with this system.
To stop charging an iPod/iPhone
Remove the iPod/iPhone.
Note on charging an iPod/iPhone
When a USB function is selected while the system is on, you cannot
charge an iPod/iPhone.
Notes
 The performance of the system may be vary, depending on the
specifications of your iPod/iPhone.
 When placing or removing the iPod/iPhone, handle the iPod/iPhone
in the same angle as that of the iPod/iPhone connector on the unit
and do not twist or sway the iPod/iPhone to prevent connector
damage.
 Do not carry the system with an iPod/iPhone set on the connector.
Doing so may cause a malfunction.
 When placing or removing the iPod/iPhone, brace the system with
one hand and take care not to press the controls of the iPod/iPhone
by mistake.
 To use an iPod/iPhone, refer to the user’s guide of your iPod/iPhone.
 Sony cannot accept responsibility in the event that data recorded to
iPod/iPhone is lost or damaged when using an iPod/iPhone with
this system.
 If you select “ ” when the system is in Normal Play mode, the
system executes repeat play of all audio files in the USB device until
you stop playback. If you select “ ” when the system is in Folder
Play mode, the system executes repeat play of all audio files in the
selected folder until you stop playback.
 If you select “ 1,” the system executes continuous repeat play of
the selected file until you stop playback.
Notes
 The playback order for the system may differ from the playback
order of the connected digital music player.
 Be sure to turn off the system before removing the USB device.
Removing the USB device while the system is turned on may corrupt
the data on the USB device.
 When USB cable connection is necessary, connect the USB cable
supplied with the USB device to be connected. See the operation
manual supplied with the USB device to be connected for details on
the operation method.
 It may take time before “READING” appears, depending on the type
of USB device connected.
 The system does not support a USB hub. Do not connect the USB
device through a USB hub.
 When the USB device is inserted, the system reads all the files on the
USB device. If there are many folders or files on the USB device, it
may take a long time to finish reading the USB device.
 With some connected USB devices, after an operation is performed,
there may be a delay before it is performed by this system.
 Compatibility with all encoding/writing software cannot be
guaranteed. If audio files on the USB device were originally encoded
with incompatible software, those files may produce noise or
interrupted sound, or may not be played back at all.
 This system cannot play audio files on the USB device in the
following cases:
when the total number of audio files in a folder exceeds 999
when the total number of audio files on a USB device exceeds
3000
when the total number of folders on a USB device exceeds 1000
(including the “ROOT” folder and empty folders)
These numbers may vary depending on the file and folder structure.
Do not save other types of files or unnecessary folders on a USB
device that has audio files.
 The system can play back to a depth of 9 folders only (including the
“ROOT” folder).
 This system does not necessarily support all the functions provided
in a connected USB device.
 Folders that have no audio files are skipped.
 The audio formats that you can listen to with this system are as
follows:
MP3: file extension “.mp3”
WMA: file extension “.wma”
Note that even when file name has the correct file extension,
if the actual file differs, the system may produce noise or may
malfunction.
To use the system as a battery charger
You can use the system as a battery charger for USB
devices that have a recharge function when the system
is on.
Charging begins when the USB device is connected to a
(USB) port  with no iPod/iPhone connected. The
charging status appears on the USB device display. For
details, see the user’s guide for your USB device.
When an iPod/iPhone is connected, press USB
FUNCTION  on the remote or press FUNCTION 
on the unit repeatedly to select the USB function.
To stop charging the USB device
Playing a file of the USB device
The audio format that can be played back on this system
is MP3/WMA*.
* Files with DRM (Digital Rights Management) copyright protection
or files downloaded from an online music store cannot be played
on this system. If you try to play one of these files, the system plays
the next unprotected audio file.
Remove the USB device.
Notes on charging the USB device
 You cannot charge an iPod/iPhone and a USB device at the same
time. To charge a USB device with an iPod/iPhone connected,
select the USB function. When no iPod/iPhone is connected, you
can charge a USB device using any function other than the iPod
function.
 You cannot charge a USB device when the system is off.
Check the websites below for the information about
compatible USB devices.
<http://support.sony-europe.com/>
Using optional audio components
1 Select the USB function.
1 Prepare the sound source.
Press USB FUNCTION  on the remote or press
FUNCTION  on the unit repeatedly.
2 Connect the USB device to the
3 Start playback.
(USB) port .
Press   on the remote or press   on the
unit.
Other operations
To
Pause playback
Stop playback
Select a folder
Select a file
Find a point in
a file
Select Repeat Play
Press
 (or   on the unit). To
resume play, press the button again.
 . To resume play, press 
*1 (or   on the unit). To
cancel resume play, press  
again*2.
+/  repeatedly.
/ // .
Hold down /  or /
 (or /  on the unit)
during playback, and release the
button at the desired point.
REPEAT  repeatedly until “ ” or
“ 1” appears.
* When playing a VBR MP3/WMA file, the system may resume
playback from a different point.
*2Resume play returns to the top folder.
1
Adjusting the sound
To
Adjust the volume
Generate a more
dynamic sound
Set the sound
effect
Notes on Shuffle Play mode
Playing the iPod/iPhone
To
Pause playback
To change the play mode
Connect additional audio component to the AUDIO
IN jack  on the unit using an audio analog cord
(not supplied).
2 Turn down the volume.
Press VOLUME  .
3 Select the AUDIO IN function.
Press AUDIO IN FUNCTION  on the remote or
press FUNCTION  on the unit repeatedly.
4 Start playback.
Start playback of the connected component and adjust
the volume.
Note
The system may enter Standby mode automatically if the volume
level of the connected component is too low. Adjust the component’s
volume accordingly. See “To turn off the Automatic Standby function.”
Press
VOLUME +/ .
BASS BOOST .
SOUND EFFECT  repeatedly
until desired sound effect is
displayed.
Each time you press this button,
sound effects are displayed in
the order “ROCK”  “POP” 
“JAZZ”  “FLAT.”
Changing the display
To
Change
information on
the display1)
Change Display
mode (see below.)
Press
DISPLAY  repeatedly when the
system is on.
DISPLAY  repeatedly when the
system is off.
For example, you can view CD/MP3 disc information or the USB
device information, such as:
1)
CD-DA disc
remaining playing time of a track during playback
total remaining playing time
MP3 disc/USB device
track or file name (“ ”)
artist name (“ ”)
album name (“
”)
The system offers the following display modes.
Display mode
Power Saving
mode1)
Clock
2)
When the system is off
The display is turned off to conserve
power. The timer and clock continue
to operate.
The clock is displayed.
You cannot set the clock in Power Saving mode.
2)
The clock display automatically turns to Power Saving mode after 8
seconds.
1)
Notes on the display information
 When the information includes double-byte characters, each doublebyte character will occupy 2 bytes
 Characters that cannot be displayed appear as “_”
 The following are not displayed:
total playing time for an MP3 disc and a USB device
total remaining playing time for an MP3 disc and a USB device
remaining playing time for an MP3 file on MP3 disc or a MP3/
WMA file in USB device
 The following are not displayed correctly:
elapsed playing time of an MP3 file encoded using VBR (variable
bit rate)
folder and file names that do not follow either the ISO9660
Level 1, Level 2, or Joliet in the expansion format
 The following are displayed:
total playing time for a CD-DA disc (except when PGM mode is
selected and the player is stopped)
remaining playing time for a track of CD-DA disc
remaining playing time for a CD-DA disc (only when Normal Play
mode is selected during playback)
ID3 tag information for MP3 files when ID3 version 1 and
version 2 tags are used (ID3 version 2 tag information display has
priority when both ID3 version 1 and version 2 tags are used for a
single MP3 file)
up to 64 characters for an ID3 tag, where characters allowed are
uppercase letters (A to Z), lowercase letters (a to z) (lowercase will
be displayed as uppercase), digits (0 to 9), and symbols (˝ $ % ’ ( )
* + , – . / < = > ? @ [ \ ] `)
Using the timers
The system offers 2 timer functions. If you use both
timers, the Sleep Timer has priority.
Sleep Timer:
You can fall asleep to music. This function works even if
the clock is not set.
Press and hold SHIFT  and press SLEEP  repeatedly.
With each press of SLEEP  with SHIFT  held
pressed, the setting time is decreased by 10 minutes from
a maximum of 90 minutes to minimum of 10 minutes.
To cancel the Sleep Timer, select “OFF.”
Play Timer:
You can wake up to CD, FM/AM reception, iPod/iPhone
or USB device at a preset time. Make sure you have set
the clock.
1 Prepare the sound source.
Prepare the sound source, and then press VOLUME
+/  to adjust the volume. You can set the CD,
iPod, USB, FM, or AM function as the sound source.
To start from a specific CD track, audio file, and radio
station create your own program.
2 Select the timer set mode.
Press and hold SHIFT  and TIMER MENU .
3 Set the play timer.
Press /  repeatedly to select “PLAY SET,” then
.
press
4 Set the time to start playback.
Press /  repeatedly to set the hour, then press
. Use the procedure above to set the minutes.
5 Use the same procedure as in step 4 to set the time
to stop playback.
6 Select the sound source.
Press /  repeatedly until the desired sound
.
source appears, then press
7 Turn off the system.
Press  . The system automatically turns on
before the preset time.
If the system is on at the preset time, the Play Timer
will not play. Do not operate the system from the time
the system turns on until the playback starts.
If the sound source is set to an FM/AM station for a
timer, the system automatically turns on 15 seconds
before the preset time. If the sound source is set
to CD/USB, the system automatically turns on
30 seconds before the preset time. If the sound source
is set to iPod/iPhone, the system automatically turns
on 30 seconds before the preset time.
To check the setting
1 Press and hold SHIFT  and TIMER MENU .
2 Press /  repeatedly to select “SELECT,” and then
iPod/iPhone
There is no sound.
 Make sure the iPod/iPhone is connected securely.
 Make sure the iPod/iPhone is playing music.
 Make sure the iPod/iPhone is updated with the latest
software. If not, update the iPod/iPhone before using
with the system.
 Adjust the volume.
The sound is distorted.
3 Press /  repeatedly to select “PLAY SEL,” and
 Make sure the iPod/iPhone is connected securely.
 Turn down the volume.
 Set the “EQ” setting of the iPod/iPhone to “Off ” or
“Flat.”
To cancel the timer
The iPod/iPhone does not function.
press
.
then press
.
Repeat the same procedure as above until “OFF” appears
.
in step 3, and then press
To change the setting
Start over from step 1.
Notes
 If you select a USB device as a timer and have many files or folders
on that device, it takes time for read processing, causing a slight
delay before start of play in response to the timer.
 If the sound source for a Play Timer is set to an FM/AM station
tuned in using auto scanning or manual scanning, when you change
the radio station after setting the Play Timer, radio station tuning for
the Play Timer will also changed.
 If the sound source for a Play Timer is set to an FM/AM station
with a registered preset number, the radio station tuning for the Play
Timer is fixed at what you set for it. Even if you change the radio
station after setting the Play Timer, the radio station setting for the
Play Timer will not change.
Notes for the iPod/iPhone user
 Make sure the iPod/iPhone is not playing when using the Play
Timer.
 The Play Timer may not be activated depending on the status of the
connected iPod/iPhone.
Tip
The Play Timer setting remains in effect as long as the setting is not
canceled manually and clock setting is completed.
 Shut down any other iOS applications running on the
iPod/iPhone. For details, refer to the operation manual
supplied with the iPod/iPhone.
 Make sure the iPod/iPhone is connected securely.
 Make sure the iPod/iPhone is updated with the latest
software. If not, update the iPod/iPhone before using
with the system.
 Because the operation of the system and the iPod/
iPhone are different, you may not operate the iPod/
iPhone using buttons on the remote or unit. In this
case, use the control buttons on the iPod/iPhone.
The iPod/iPhone cannot be charged.
 Make sure the iPod/iPhone is connected securely.
 Make sure the system is not in USB function. An iPod/
iPhone cannot be charged in USB function.
 You cannot charge the iPod/iPhone even if you connect
the USB cable supplied with your iPod/iPhone to the
USB connector on the system.
The ring volume of the iPhone does not
change.
 Adjust the ring volume on the iPhone.
USB device
Troubleshooting
1 Make sure the power cord is firmly connected.
2 Find your problem in the checklist below, and take
the indicated corrective action.
If the issue persists, contact your nearest Sony dealer.
General
The system does not turn on.
 Is the power cord plugged in correctly?
The system has entered Standby mode
unexpectedly.
 This is not a malfunction. The system enters Standby
mode automatically in about 30 minutes when there is
no operation or audio signal output. See “To turn off
the Automatic Standby function.”
The clock setting or the Play Timer operation
has been cancelled unexpectedly.
 If about a minute elapses with no operation, the clock
setting or Play Timer setting is cancelled automatically.
Perform the operation again from the beginning.
There is no sound.
 Press VOLUME +  to turn up the volume.
 Make sure additional audio components are connected
correctly.
 Make sure the function is set to AUDIO IN.
 Is anything blocking the ventilation holes of the system?
 The specified station may have temporarily stopped
broadcast.
Severe hum or noise.
 Move the system away from sources of noise.
 Connect the system to a different wall outlet.
 Install a noise filter (not supplied) to the power cord.
The remote does not function.
 Remove any obstacles between the remote and the
remote sensor  on the unit, and position the unit
away from fluorescent lights.
 Point the remote at the system’s sensor .
 Move the remote closer to the system.
CD/MP3 disc
The sound skips, or the disc will not play.
 Wipe the disc clean, and replace it.
 Move the system to a location away from vibration (for
example, on top of a stable stand).
Play does not start from the first track.
 Return to normal play by pressing PLAY MODE 
repeatedly until both “PGM” and “SHUF” disappear.
Starting playback takes more time than usual.
 The following discs can increase the time it takes to
start playback:
a disc recorded with a complicated tree structure
a disc that has many folders
Erroneous display.
 The data stored in the CD-DA, MP3 disc may have
been corrupted. Perform the transfer again.
 The character codes that can be displayed by this
system are as follows:
Uppercase (A to Z)
Lowercase (a to z) (lowercase will be displayed as
uppercase)
Digits (0 to 9)
Symbols (˝ $ % ’ ( ) * + , – . / < = > ? @ [ \ ] `)
Other characters appear as “_”
The connected iPod/iPhone or USB device is
not being charged, when both are connected at
the same time.
 You cannot charge an iPod/iPhone and the USB device
at the same time. Select the USB function to charge a
USB device.
Are you using a supported USB device?
 If you connect an unsupported USB device, the
following problems may occur. Check the information
on the websites about compatible USB devices with
URLs listed under “Playing a file of the USB device.”
The USB device is not recognized
File or folder names are not displayed on this system
Playback is not possible
The sound skips
There is noise
A distorted sound is output
There is no sound.
 The USB device is not connected correctly. Turn off the
system and reconnect the USB device.
There is noise, skipping, or distorted sound.
 You are using an unsupported USB device. Check the
information on the websites about compatible USB
devices.
 Turn off the system and reconnect the USB device, then
turn on the system.
 The music data itself contains noise, or the sound
is distorted. Noise may have entered during the
transferring process. Delete the file, and try transferring
again.
 The bit rate used when encoding audio files was low.
Send audio files with higher bit rate to the USB device.
“READING” is displayed for an extended time,
or it takes a long time before playback starts.
 The reading process can take a long time in the
following cases:
There are many folders or files on the USB device
The file structure is extremely complex
The memory capacity is excessive
The internal memory is fragmented
Erroneous display.
 The data stored in the USB device may have been
corrupted. Perform the transfer again.
 The character codes that can be displayed by this
system are as follows:
Uppercase (A to Z)
Lowercase (a to z) (lowercase will be displayed as
uppercase)
Digits (0 to 9)
Symbols (˝ $ % ’ ( ) * + , – . / < = > ? @ [ \ ] `)
Other characters appear as “_”
The USB device is not recognized.
 Turn off the system and reconnect the USB device, then
turn on the system.
 Check the information on the websites about
compatible USB devices.
 The USB device does not work properly. Refer to the
operating instructions supplied with the USB device for
how to deal with this problem.
Playback does not start.
 Turn off the system and reconnect the USB device, then
turn on the system.
 Check the information on the websites about
compatible USB devices.
Playback does not start from the first file.
 Set the play mode to Normal Play mode.
Audio file cannot be played back.
 MP3 files in MP3 PRO format cannot be played back.
 WMA files in Windows Media Audio Lossless and
Professional format cannot be played back.
 USB device formatted with file systems other than
FAT16 or FAT32 are unsupported.*
 In case multiple partitions exist in USB device that is
being used, files may not be played back.
 The system can play back to a depth of 9 folders only.
 Files that are encrypted or protected by passwords, etc.
cannot be played back.
 Files with copyright protection (Digital Rights
Management) cannot be played back by this system.
* This system supports FAT16 and FAT32, but some USB device
may not support all of these FAT. For details, refer to the operating
instructions of each USB device or contact the manufacturer.
Tuner
Severe hum or noise, or stations cannot be
received. (“TUNED” or “STEREO” flashes on the
display.)
 Connect the antenna properly.
 Find a location and an orientation that provide good
reception, and then set up the antenna again.
 Keep the antennas away from the power cord to avoid
picking up noise.
 Turn off nearby electrical equipment.
Several radio stations can be heard at the same
time.
 Find a location and an orientation that provide good
reception, and then set up the antenna again.
 Bundle the antenna cables using commercially available
cord clips, for example, and adjust the cable lengths.
To reset the system to factory settings
If the system still does not operate properly, reset the
system to factory settings.
Use buttons on the unit to reset the system to its factory
default settings.
1 Disconnect and reconnect the power cord, and then
turn on the system.
2 Press and hold   and /  on the unit until
“RESET” appears in the display.
All user-configured settings, such as preset radio
stations, timer, and the clock, are deleted.
To turn off the Automatic Standby function
This system is equipped with an Automatic Standby
function. With this function, the system enters Standby
mode automatically in about 30 minutes when there is no
operation or audio signal output.
By default, the Automatic Standby function is turned on.
Use buttons on the unit to turn off the Automatic
Standby function.
Hold down   while the system is on, until
“AUTO. STBY OFF” appears.
To turn on the function, repeat the procedure until
“AUTO. STBY ON” appears.
Notes
 “AUTO. STBY” appears in the display for 2 minutes before the
system enters Standby mode.
 The Automatic Standby function is invalid for the tuner function
(FM/AM), even when you have enabled it.
 The system may not enter Standby mode automatically in the
following cases:
while an audio signal is being detected
during playback of audio tracks or files
while the preset Sleep Timer or Play Timer is in process
 The system counts down the time again until it enters Standby
mode, even when Automatic Standby function is enabled in the
following cases:
when an iPod/iPhone or USB device is connected
when a button on the remote or unit is pressed
when a preset time of the Sleep or Play Timer is starts
Messages
CANNOT PLAY: You have inserted a disc that cannot be
played back on this system.
COMPLETE: The preset operation ended normally.
DEVICE ERROR: Unpredictable situation (or an
unknown device is connected).
FULL: You tried to program more than 25 tracks or files
(steps).
No DEVICE: No USB device is connected or the
connected USB device has been removed.
NO DISC: There is no disc in the player, or you have
loaded a disc that cannot be played.
No MEMORY: No memory device has been plugged into
the USB hub connected to the system.
NO STEP: All of the programmed tracks have been
erased.
NO SUPPORT: An unsupported disc, USB device, or
iPod/iPhone is connected or an iPod/iPhone whose
battery is empty is connected.
NO TRACK: There are no playable files in the USB device
or on the CD disc.
NOT USED: You tried to perform a specific operation
under conditions where that operation is prohibited.
OVER CURRENT: The system has detected a power
failure from a connected iPod/iPhone or USB device.
Remove the USB device and iPod/iPhone from the
system and turn the system power off then back on. If
the problem persists, contact your nearest Sony dealer.
PROTECT: The system has detected a power failure.
Unplug the AC adaptor. If the problem persists, contact
your nearest Sony dealer.
PUSH STOP: You pressed PLAY MODE  during
playback in the CD or USB function.
TIME NG: The Play Timer start and end times are set to
the same time.
Precautions
Discs that this system CAN play
 Audio CD
 CD-R/CD-RW (audio data/MP3 files)
Discs that this system CANNOT play
 CD-ROM
 CD-R/CD-RW other than those recorded in music CD
format or MP3 format conforming to ISO9660 Level
1/Level 2, Joliet
 CD-R/CD-RW of poor recording quality,
CD-R/CD‑RW that have scratches or are dirty,
or CD‑R/CD-RW recorded with an incompatible
recording device
 CD-R/CD-RW which is finalized incorrectly
 Discs containing files other than MPEG 1 Audio Layer3 (MP3) files
 Discs of non-standard shape (for example, heart,
square, star)
 Discs that have adhesive tape, paper, or sticker attached
to them
 Rental or used discs with attached seals where the glue
extends beyond the seal
 Discs that have labels printed using ink that feels tacky
when touched
Notes on discs
 Before playing, wipe the disc with a cleaning cloth from
the center out to the edge.
 Do not clean discs with solvents, such as benzine,
thinner, or commercially available cleaners or antistatic spray intended for vinyl LPs.
 Do not expose discs to direct sunlight or heat sources
such as hot air ducts, nor leave it in a car parked in
direct sunlight.
On safety
 Completely disconnect the power cord (mains lead)
from the wall outlet (mains) if it is not going to be used
for an extended period of time. When unplugging the
system, always grip the plug. Never pull the cord itself.
 Should any solid object or liquid get into the system,
unplug the system, and have it checked by qualified
personnel before operating it again.
 The AC power cord can be changed only by a qualified
service facility.
On placement
 Do not place the system in an inclined position or in
locations that are extremely hot, cold, dusty, dirty, or
humid or lacking adequate ventilation, or subject to
vibration, direct sunlight or a bright light.
 Be careful when placing the system on surfaces that
have been specially treated (for example, with wax, oil,
polish) as staining or discoloration of the surface may
result.
 If the system is brought directly from a cold to a warm
location or is placed in a very damp room, moisture
may condense on the lens inside the CD player, and
cause the system to malfunction. In this situation,
remove the disc, and leave the system turned on for
about an hour until the moisture evaporates.
On heat buildup
 Heat buildup on the unit during operation is normal
and is not cause for alarm.
 Do not touch the cabinet if it has been used
continuously at a high volume because the cabinet may
have become hot.
 Do not obstruct the ventilation holes.
On the speaker system
This speaker system is not magnetically shielded, and
the picture on nearby TV sets may become magnetically
distorted. In this situation, turn off the TV, wait 15 to
30 minutes, and turn it back on.
Cleaning the cabinet
Clean this system with a soft cloth slightly moistened
with a mild detergent solution. Do not use any type of
abrasive pads, scouring powder, or solvents, such as
thinner, benzine, or alcohol.
Specifications
Amplifier section
Power output (rated): 4 watts + 4 watts (8 ohms at 1 kHz, 1% THD)
Continuous RMS power output (reference): 5 watts + 5 watts (8 ohms at
1 kHz, 10% THD)
Input
AUDIO IN (stereo mini jack): Sensitivity 900 mV, impedance 47 kilohms
CD player section
System: Compact disc and digital audio system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6 µW
*This output is the value measurement at a distance of 200 mm from the
objective lens surface on the Optical Pick-up Block with 7 mm aperture.
Frequency response: 20 Hz  20 kHz
Signal-to-noise ratio: More than 80 dB
Dynamic range: More than 80 dB
Tuner section
Antenna:FM lead antenna
AM loop antenna
FM tuner section
Tuning range:
87.5 MHz  108.0 MHz (50 kHz step)
AM tuner section
Tuning range:
531 kHz  1602 kHz (9 kHz step)
iPod/iPhone section
Compatible iPod/iPhone models:
iPod touch 4th generation
iPod touch 3rd generation
iPod touch 2nd generation
iPod nano 6th generation
iPod nano 5th generation (video camera)
iPod nano 4th generation (video)
iPod nano 3rd generation (video)
iPod classic 160 GB (2009)
iPhone 4S
iPhone 4
iPhone 3GS
iPhone 3G
“Made for iPod,” and “Made for iPhone” mean that an electronic accessory has
been designed to connect specifically to iPod or iPhone, respectively, and has
been certified by the developer to meet Apple performance standards. Apple
is not responsible for the operation of this device or its compliance with safety
and regulatory standards. Please note that the use of this accessory with iPod
or iPhone may affect wireless performance.
USB section
Supported bit rate:
MP3 (MPEG 1 Audio Layer-3): 32 kbps  320 kbps, VBR
WMA: 48 kbps  192 kbps, VBR
Sampling frequencies:
MP3 (MPEG 1 Audio Layer-3): 32/44.1/48 kHz
WMA: 44.1 kHz
(USB) port: Type A, maximum current 500 mA
Speaker section
Full-range speaker: 80 mm, cone type
Rated impedance: 8 ohms
General
Power requirements:
AC adaptor
Input: 110 V  240 V AC, 50/60 Hz
Output: DC 9.5 V 1.8 A
Power consumption: 13 watts
Dimensions (W/H/D):
Approx. 400 mm × 197 mm × 114 mm
Mass: Approx. 2.4 kg
Quantity of the main unit: 1 piece
Supplied accessories: Remote Commander (1), AC adaptor (1),
AM loop antenna (1), R6 (Size AA) batteries (2)
Design and specifications are subject to change without notice.
Standby power consumption: 0.5 W
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement