PRINCETON
PRINCETON
TWO-HANDLE WIDESPREAD LAVATORY FAUCET
WITH BRASS SPOUT
MODEL NUMBER:
4508.801 Princeton Widespread
Metal Speed Connect® Pop-up drain.
Metal Lever handles.
356mm
(14)
125mm
(4-7/8)
88mm
(3-1/2)
93mm
(3-5/8)
35mm
(1-3/8)
MAX.
35mm
(1-3/8)DIA.
MOUNTING
HOLES (3)
28mm
(1-1/8)
DIA.
60mm
(2-3/8)DIA.
FLEXIBLE
HOSE
89mm
(3-1/2)
140mm
(5-1/2)
FLEXIBLE
HOSE
FOR GROUND JOINT
OR 1/2" O.D. SLIP
CONNECTION
152mm - 305mm
(6 TO 12)
FLEXIBLE
32mm OD
(1-1/4 OD)
GENERAL DESCRIPTION:
PRODUCT FEATURES:
Cast brass valve bodies with flexible hose connections for 6"
to 12" (152mm to 305mm) installations. 1/4 turn washerless
ceramic disc valve cartridges. Cast brass spout. One-half inch
male inlet shanks with brass coupling nuts. 20" (500mm) long
flexible stainless steel drain cable is pre-assembled to faucet
body. Metal Speed Connect® drain body with 1-1/4 inch
(32mm) tail piece. 1.5 gpm/5.7L/min. maximum flow rate.
Ceramic Disc Valve Cartridges: Assures a lifetime of
drip-free performance.
Brass Construction: Durable. Ideal for prolonged contact
with water. Provides the finest surface for application of
colors and finishes.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
Exclusive Speed Connect Metal Drain:
• Fewer Parts - installs in less time.
• No adjustments required - seals the first time, every time.
• Flexible stainless steel cable - installs effortlessly in
tight spaces.
Choice of Finishes: Available in Polished Chrome,
Blackened Bronze (PVD) or Satin Nickel (PVD).
SUGGESTED SPECIFICATION:
Two handle widespread lavatory faucet shall feature cast brass valve bodies with flexible hose connections for 6" to 12"
installations. Shall also feature 1/4 turn washerless ceramic disc valve cartridges. Shall also feature a metal drain body with
stainless steel cable actuation. Fitting shall be American Standard Model #4508.801.___.
© 2008 AS America Inc.
C59
PRINCETON
TWO-HANDLE WIDESPREAD LAVATORY FAUCET
WITH BRASS SPOUT
CODES AND STANDARDS
FLOW RATE*
2.0
GALLONS PER MINUTE
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
NSF 61/Section 9
1.5
1.0
0.5
0.0
20
40
60
80
100
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
Finish Options
Product
Number
Description
4508.801
Princeton Widespread with Metal Speed Connect® Pop-up drain.
Metal Lever handles.
Meets the American Disabilities Act Guidelines and ANSI A117.1
Requirements for the physically challenged.
© 2008 AS America Inc.
C60
Polished
Chrome
Blackened
Bronze
(PVD)
Satin
Nickel
(PVD)
002
068
295
RETROSPECT COLLECTION®
PEDESTAL SINK
FIRE CLAY
RETROSPECT COLLECTION ® PEDESTAL SINK
• Authentically styled rectangle pedestal
• Made from fine fireclay
• Generous deck area for toiletries
• Hidden front overflow
• Supplied with mounting kit
• Right Height™ for greater comfort
• Part of design matched Retrospect Collection ®
❏ 0282.800 Faucet holes on 8" (203mm) centers
Nominal Dimensions:
27" x 19-3/4" x 36"
(686 x 502 x 914mm)
Separate Components:
❏ 0282.008 Pedestal top 8" (203mm) centers
❏ 0066.000 Pedestal only 13-3/4"
(349mm)
FINISHED WALL
3-3/8"
(86mm)
Bowl sizes:
15-1/2" (394mm) wide
12" (305mm) front to back
6-1/8" (156mm) deep
9"
(229mm)
15"
(381mm)
19-3/4"
(502mm)
1-3/4" DIA.
STD. DRAIN
OUTLET
Compliance Certifications Meets or Exceeds the Following Specifications:
• ASME A112.19.9M for Non-Vitreous
Ceramic Fixtures
• CAN/CSA B45 Series
27"
(686mm)
PED TOP
OUTLINE
8-1/8"
TO BOTTOM
OF DRAIN OUTLET
(206mm)
7-1/4"
(184mm)
To Be Specified:
❏ Color: ❏ White
❏ Recommended Faucet: 2373.701
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
3 Holes
1-3/8" (35mm) Dia.
8"
(203mm)
8"
(203mm)
3/8" (10mm) DIA.
SINK ANCHOR
SCREW HOLES
ON 13-3/4" (349mm)
CENTRES
SUPPLIES
AS REQ'D
36"
(914mm)
1-1/4 O.D.
WASTE
*
24"
(610mm)
1-1/4" O.D.
TAILPIECE
*
22"
(559mm)
28-1/4"
(718mm)
FINISHED
FLOOR
9-7/8"
(251mm)
3/8" (10mm) DIA.
BASE ANCHOR
SCREW HOLE
CENTER
PEDESTAL
SIDE SECTION
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
*SUGGESTED.
▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.9.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
© 2008 AS America Inc.
J8
Revised 2/08
PORTSMOUTH®
MIRROR
FURNITURE
PORTSMOUTH MIRROR
❏ 9210.101
•Rectangular mirror with poplar solid frame
•Coordinates with the Portsmouth Collection
•Available in a Dark Chocolate or White finish
Nominal Dimensions:
25" x 1-3/4" (635 x 44mm)
34-3/8" height (873mm)
322
Dark Chocolate
020
White
25"
(635mm)
1-3/4"
(44mm)
MEASURE “D”
MOUNTING
RING
HARDWARE
FOR MIRROR
34-3/8"
(873mm)
1-1/4"
(32mm)
MIRROR
BACK VIEW
FRONT VIEW
NOTES:
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
© 2012 AS America Inc.
I-12
Revised 6/12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement